Supplement for Remote Control
Total Page:16
File Type:pdf, Size:1020Kb
Supplement for Remote Control Remote control functions 1 1 Remote control signal transmitter External device operation keys Transmits infrared signals. Let you play back and perform other operations for external devices when an input source other than “TUNER” is SOURCE RECEIVER 2 SOURCE z key 2 Turns on/off an external device. selected. HDMI SOURCE key 1234 B Sound mode keys Sets the remote control to operate external devices (p.3). Select a sound mode. 5 V-AUX This key lights up in green after pressed. AV RECEIVER key C INFO key 3 1234 Sets the remote control to operate the unit (p.3). This key Selects the information displayed on the front display. 65 AUDIO TUNER lights up in orange after pressed. D SLEEP key RECEIVER z key Switches the unit to standby mode automatically after a BLUETOOTH USB NET PHONO Turns on/off (standby) the unit. specified period of time has elapsed (sleep timer). Press MAIN ZONE 2 PARTY HDMI OUT G 4 repeatedly to set the time (120 min, 90 min, 60 min, 30 min, off). H 3 Input selection keys SCENE Select an input source for playback. E Numeric keys 5 BD TV NET RADIO DVD 4 MAIN/ZONE2 switch Let you enter numerical values, such as radio frequencies. Changes the zone (main zone or Zone2) that is controlled by MEMORY key the remote control. Registers FM/AM radio stations as presets. 6 PROGRAM MUTE VOLUME I 5 SCENE keys F TV operation keys J Select the registered input source, sound program, and Let you select TV input and volume, and perform other TV 7 TOP MENU POP-UP/MENU various settings with one touch. Also, turns on the unit when operations. ON it is in standby mode. 8 SCREEN OPTION K G HDMI OUT key 6 PROGRAM keys Selects HDMI OUT jacks to be used for video/audio output. 9 ENTER Select a sound program. H PARTY key 7 External device operation keys Turns on/off the party mode. RETURN DISPLAY L Select menus for external devices. I VOLUME keys BAND : MODE 8 ON SCREEN key Adjust the volume. A TUNING PRESET Displays the on-screen menu on the TV. J MUTE key SUR. DECODE STRAIGHT 9 Menu operation keys B MOVIE MUSIC Mutes the audio output. ENHANCER PURE DIRECT Cursor keys Select a menu or a parameter. C INFO SLEEP ENTER Confirms a selected item. K OPTION key Displays the option menu. D 1234 RETURN Returns to the previous screen. E 5 687 0 MODE key L DISPLAY key MEMORY Switches the iPod operation modes. Displays status information on the TV. 90 10 ENT TV A Radio keys M CODE SET key F INPUT TV VOL TV CH Operate the FM/AM radio when “TUNER” is selected as the Registers remote control codes of external devices on the MUTE CODE SET M input source. remote control. BAND Switches between FM and AM radio. PRESET Select a preset station. TUNING Select the radio frequency. En 1 SOURCE SOURCE RECEIVER Controlling external devices with the remote control HDMI 12341 2 3 4 You can use the unit’s remote control to operate external devices 5 V-AUXV-AUX AV (such as BD/DVD players) if you have registered the remote control 3 Press TV z. 121 2 343 4 code of the external device. 5 665 AUDIOAUDIO TUNERTUNER 4 Use the numeric keys to enter the 4-digit remote BLUETOOTHBLUETOOTH USBUSB NETNET PHONOPHONO MAINMAIN ZONEZONE 2 PARTY HDMI OUTOUT control code. • You cannot control an external device that does not have a remote control sensor. SCENESCENE BDBD • Ensure that the remote control ID of the external device is set to “ID1”. If any other Once the remote control code is successfully registered, SOURCE DVDVDD TV NET RADIORADIO ID is selected, the remote control operations may not work properly. blinks twice. • If the unit’s remote control is without batteries for more than 2 minutes, the If it blinks six times, registration has failed. Repeat from Step 2. PROGRAMPROGRAM MUTE VVOLUMEOLUME registered codes may be cleared. If this happens, insert new batteries and register the codes again. • Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all ■ TOPTOP MENMENUU POP-UP/MENUPOP-UP/MENU TV operations the input selection keys. With this setting, you can control HDMI ONON SCREENSCREEN OOPTIONPTION Control-compatible devices connected to the unit with the remote control. (This Once you have registered the remote control code for your TV, you function may not work depending on the specification of the external device.) can control it using the TV operation keys, regardless of the input ENTERENTER source selected on the unit. RETURN DISPLAYDISPLAY Registering the remote control code for a TV BBANDAND INPUT Switches the video inputs of the TV. MODEMODE TUNINGTUNING PRESETPRESET You can use the unit’s remote control to operate a TV if you have MUTE Mutes the audio output of the TV. SUR.SUR. DECODEDECODE STRAIGHTSTRAIGHT MOVIEMOVIE MUSICMUSIC registered its remote control code. TV operation keys TV VOL Adjust the volume of the TV. ENHANCERENHANCER PURE DIRECTDIRECT INFOINFO SLEEPSLEEP TV CH Switch the channels of the TV 1234 TV z Turns on/off the TV. 5 6 7 8 Numeric keys • You can also register your TV’s remote control code to the unit’s input selection MEMORY 90 10 ENT keys. This would allow you to use the cursor keys or numeric keys to operate the TV TV operation keys TV (this function may not be available on some TV models). INPUT z TV VOL TV CH TV MUTE CODE SET CODE SET 1 See “List of remote control codes” (p.6) to find your TV’s remote control code. • If there are multiple remote control codes, register the first code in the list. If that does not work, try the other codes. 2 Press CODE SET. SOURCE blinks twice. Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 2. En 2 ■ SOURCE RECEIVER Registering the remote control codes for Playback device operations SOURCE z HDMI SOURCE playback devices Once you have registered the remote control code for your 1234 RECEIVER playback device, you can control it using the following keys after 5 V-AUX AV You can use the unit’s remote control to operate playback devices if selecting the input source or scene. Input selection key 1234 you have registered their remote control codes. You can also use 65 AUDIO TUNER the input selection keys to change the playback devices that are BLUETOOTH USB NET PHONO controlled by the remote control, because their remote control • By pressing SOURCE or RECEIVER, you can switch the devices (the unit or MAINMAIN ZONEZONE 2 PARTY HDMI OUTOUT codes are assigned to the input selection keys. external device) that are operated by the menu operation keys, DISPLAY and numeric keys. You can operate the unit after pressing RECEIVER (lights up in SCENESCENE orange), and an external device after pressing SOURCE (lights up in green). For BDBD TV NET RADIORADIO DVDVDD See “List of remote control codes” (p.6) to find the example, if you register the remote control code of your external device on 1 TUNER, you can operate the unit’s built-in FM/AM radio after pressing RECEIVER remote control code for your playback device. and the external device after pressing SOURCE. PROGRAMPROGRAM MUTE VVOLUMEOLUME SOURCE z Turns on/off the playback device. TOPTOP MENMENUU POP-UP/MENUPOP-UP/MENU • If there are multiple remote control codes, register the first code in the list. If Cursor keys Select an item. ONON SCREENSCREEN OOPTIONPTION that does not work, try the other codes. Menu operation ENTER Confirms a selected item. keys ENTER Menu operation keys 2 Press CODE SET. RETURN Returns to the previous screen. RETURN DISPLAY DISPLAY SOURCE blinks twice. DISPLAY Switches information on the display. BAND MODEMODE TOP MENU Displays the top menu. TUNINGTUNI PRESET External device Perform each of the following steps within 1 minute. operation keys SUR.SUR. DECODEDECODE STRAIGHTSTRAIGHT Otherwise, the setting will be canceled. If this happens, POP-UP/MENU Displays the pop-up menu. MOVIEMOVIE MUSICMUSIC ENHANCERENHANCER PURE DIRECTDIRECT repeat from Step 2. INFOINFO SLEEPSLEEP s Stops playback. 1234 d Stops playback temporarily. Press the input selection key. 5 6 7 8 Numeric keys 3 MEMORY External device Starts playback of the selected 90 10 ENT a TV For example, press HDMI 1 to set the remote control code operation keys song/video. INPUT TV operation keys for the playback device connected to the HDMI 1 jack. TV VOL TV CH TV z h MUTE CODE SET CODE SET Searches forward/backward (by holding down). 4 Use the numeric keys to enter the 4-digit remote j control code. f Skips forward/backward. g Once the remote control code is registered successfully, SOURCE Numeric keys Enter numerical values. blinks twice. If it blinks six times, registration has failed. Repeat from Step 2. TV operation keys Control the TV (p.2). • For details on how to register a remote control code to a SCENE key, see • These keys work only if the corresponding function is available on your playback “Changing the external device assigned to the SCENE keys” (p.4) device and if the device can be operated with an infrared remote control. En 3 SOURCE SOURCE RECEIVER Changing the external device assigned to Resetting remote control codes HDMI the SCENE keys 1234 You can reset a remote control code registered to each input 5 V-AUX selection key.