DOCSLIB.ORG

COLORADO LUTHIER MEMBERSHIP Date Name/Company Phone E-Mail /WEB Page Information

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
COLORADO LUTHIER MEMBERSHIP Date Name/Company Phone E-Mail /WEB Page Information COLORADO LUTHIER MEMBERSHIP Date Name/Company Phone e-Mail /WEB Page Information 2/9/14 Amend, Richard [email protected] Attending Colorado School of Luthier second class with Edward Dick (guitar #1 = dreadnought, guitar #2 = 12-string). I'm still in hobby-mode, but I do want to get proficient enough over the next six years to be able to teach a beginning course (ukelele?) to high school age students. 2/26/14 Anderson, David 972-342-6545 [email protected] Steel string guitar builder in Loveland, CO August Guitars www.augustguitars.com 4/5/14 Anderson, Joseph [email protected] I have built one guitar, a J--45 style model. Cannot wait to build a second, but i'm finishing up nursing school so the funds are limited but only for a bit longer! 3/9/14 Anthony, Michael 970/361-8577 [email protected] Steel and nylon string guitars, dabbling with www.MichaelAnthonyGuitars.com electric guitar kits Aslakson, Patrick 303/766-8592 [email protected] Head Pinwheel of the Colorado Luthiers. home guitar player/Just Beginning 720/261-3960 Lutherie/Looking for first guitar cell kit/Possible business opportunity Bailey, Kent A. http://www.kabart.com Master Woodcarver, Artist, Sculptor Wood Creations [email protected] [email protected] Bashkin, Michael 970/495-1011 [email protected] Steel String Guitars http://bashkinguitars.com Bresnan, Jerry Brodoway, 303/722-0518 [email protected] Hobbyist Luthier / Woodworker Russell (cell & home) Built my first guitar with no training in 2006 as an art project, but it was more art than guitar. Built my first real guitar in 2007 under the supervision of Jonas Ceelen (Jonas Guitars). I have a couple of projects in the works, but looking for additional training, advice, & experience. Burghardt, Geoff 720/837-8044 [email protected] in pursuit of anything stringed (Mainly mandolin) Friday, October 31, 2014 1 | P a g e COLORADO LUTHIER MEMBERSHIP Carol, Bonnie 303/258-7763 [email protected] Dulcimers http://www.BonnieCarol.com Crook, Peter [email protected] First Kit in 2003. First Commission in 2009. http://www.rayadoguitars.com Beginning Luthier. Steel String Guitars and Baritone Ukuleles . Free form builder in construction style of Velazquez -Gurian-Millard & Cumpiano. In 2009, started leaning toward construction with Native North American and " El Camino Real" Trade Hardwoods embracing the " cultural instrument" aspect. 8/8/14 Cross, Darin [email protected] Have repaired various acoustic and electric guitars of my own, and have always had the desire to construct an acoustic of my own. Have even purchased some of the wood needed, but lack the tools and knowledge. Thinking of attending RRCC in the fall for their course in Steel String Construction. 10/22/14 Cochran, Chuck [email protected] After repairing guitars, basses, banjos, violins, violas and other various instruments, and having built several kit instruments over the last 30+ years, I'm now working on my own design and building Octave Mandolins and Citterns. Cory, Bill [email protected] Have built 8 different kits. Writing a book for http://www.KitGuitarBuilder.com potential kit builders http://www.KitGuitarForum.com with overview of all kits, tools, etc.. Dick, Edward V. 303/777-7411 [email protected] Resident Luthier for Olde Town Picking Parlor - EVD String Instruments http://www.evd303.com Drake, Jim 303/816-0583 [email protected] I hand build electric guitars, both chambered - Drake Guitars LLC. http://www.drakeguitars.com and solid body, full time. Dunwell, Alan 303/939-8870 [email protected] List Manager and Head Pinwheel Emeritus - Dunwell Guitar http://dunwellguitar.com Steel string and double top guitars, mandolins, and Irish Bouzoukis Friday, October 31, 2014 2 | P a g e COLORADO LUTHIER MEMBERSHIP * Einolf, James 720/323-9841 [email protected] Produces guitars based on the original - James Einolf http://www.JamesEinolf.com specifications of the Handcrafted Guitars [email protected] 1926-1929 Gibson L-0, L-1 & Nick Lucas models. 3/15/14 Flaherty, Matt [email protected] I have been building guitars since 1989 when I https://www.facebook.com/TexasToastCustomG attended Roberto-Venn. I apprenticed with uitars Bruce Clay at Rarebird Guitars and realized that the time was not right for me to build instruments full time. Run his own shop called Texas Toast Custom Guitars. 4/5/14 Fletcher, Paul [email protected] Vintage Acoustic Guitar Restoration, Repair, New build, Brace Alterations. Buy and Sell. I have consigned four guitars with Victor Guitar with successful sales. I credit Robbie O'brien's 2005 DVD and Edward Dick's encouragement to my continuing work on Acoustics. 2/19/14 Fulghum, Gregoire [email protected] Former Lutherie Instructor/Teaching Assistant at Red Rocks Community College (2008-2014). Specializing in contemporary classical and fine flamenco instruments, and modern 'ukuleles German, Greg 720/929-0241 [email protected] Archtop builder and repairman at Olde http://www.germanguitars.com Town Pickin' Parlor Goldwire, Ryan Goodwin, Ken [email protected] Acoustic and electric guitars and basses 3/31/14 Gristak, Richard L. 303/674-4877 [email protected] Experienced woodworker, long time player, planning my first guitar build shortly. My plan is to build a dreadnought cutaway, possibly modeled after a Tippen, Froggy Bottom, or Kevin Ryan. 1/19/14 Haas,Rich 303/400- 7045 [email protected] 'Jus beginnin' ** Friday, October 31, 2014 3 | P a g e COLORADO LUTHIER MEMBERSHIP 1/21/14 Hannam, Beau 970/623-2586 [email protected] Australian luthier moved to Grand Junction www.beauHannamGuitars.com Steel string guitars and ukuleles Harris, Daniel 720/352-3641 [email protected] Building Custom Steel String and http://www.HarrisInstruments.com Classical Guitars. Repairwork on a limited basis. Harris, Steve 303/885-6142 [email protected] Steel String and Classical Acoustics. A beginner and looking forward to learning and eventually producing fine guitars. Hasenstab, Michael 720/225-9289 [email protected] Aspiring Luthier. X Holt, Charlie (h)720/890- [email protected] I've collected lots of wood, and am just starting 5974 my first build, a (c)720/935- steel string. 5781 Howell, Eric (h)720/890- [email protected] Classical 5974 (c)720/935- 5781 Johnson, Bob 720/570-8660 [email protected] Steel String Guitars 9/5/14 Johnson, Robert [email protected] Apprenticed under Stan Thrush back in the late seventies, when he was at the old Denver Folklore Center on 17th Avenue and later at the South Acoma location by the old Melody Music, in Englewood. He was authorized service for Martin, Gibson, Fender, Ovation products. Into both archtops & flatops, creative design, acoustical sound and quality of both manufactured and independent instrument builders. ** Kemerling, Karen 303/838-7714 [email protected] Steel String OM style guitars + mandolin, and [email protected] classical Previous TA to Robbie O'Brien at Red Friday, October 31, 2014 4 | P a g e COLORADO LUTHIER MEMBERSHIP Rocks Community College Luthier Program, www.k2guitars.com course with Edward Dick, and Kent Everett www.coloradoluthiers.org Kelley, Donna 408/505-7416 [email protected] A mechanical engineer, experienced woodworker and carver, building my first archtops King, Jerry 303/838-7714 [email protected] Aspiring guitar/instrument builder Krimmel, Max 303-258-7723 [email protected] I should have quit a long time ago http://maxkrimmel.com Krowczy,Steve 303/978-0707 [email protected] Steel and Classical Kubala, Kenny [email protected] Just finishing up my first guitar and am interested in making more. 3/31/14 Kaufman, Scott [email protected] New builder of electric guitars- enjoy sharing build philosophies I have found to work best and maybe pickup making. I do play acoustic guitar almost as much as electric these days and I do want to build an acoustic this year Kuhn, Richard 303/805-0525 [email protected] Occasionally build 3/15/14 Learn, Mike [email protected] Custom paint work for many companies in the www.learnguitars.com US and Canada. Mostly for Jackson, Charvel, FMIC, BC Rich and a bunch of independent builders. I build about 20 instruments a year, specializing in rock and roll. Although my passion is 17 in American Archtops. ** Leveque, Tracy 720/256-8470 [email protected] Has completed 9 instruments including some http://www.luthiersuppliers.com ukulele's, a bouzouki, 5 guitars, and a bowed psaltery. Currently the owner of Luthier Suppliers selling unusual jigs for instrument makers. Friday, October 31, 2014 5 | P a g e COLORADO LUTHIER MEMBERSHIP 5/4/14 Lindquist, Lars [email protected] Basic setup & repairs since fall of 2013. I've also completed a few classes through the Colorado School of Lutherie. Lowell, David 303/499-2612 [email protected] Lynn, Dave [email protected] http://home.comcast.net/~mesquite8 Markin, Kellye 303/888-9573 [email protected] Lighthouse Lutherie owner/luthier. Repair and Lighthouse Lutherie http://LighthouseLutherie.com setup for acoustic and electric guitar & bass, mandolin, banjo and other stringed instruments. Marsh, Robert R 303/278-1214 [email protected] * Attended Summit School for Guitar Building and Repair * Primary interest is in Archtop Construction * Involved with Red Rocks CC Luthiery Program * Seeking career in this field 4/6/14 McMurdo, Jim [email protected] Started Luthier program RRCC with Robbie O'Brien in 2007. Become part of his teaching assistant staff and I am currently still teaching at RRCC in the lutherie section of the wood working department. My main building interest are acoustic classical, flamingo, and steel string guitars Milligan, Gene 303/466-0831 [email protected] Build and repair of guitars, mandolins and bouzoukis 2/9/14 Moore, Gene [email protected] From Johnstown. I have built two guitars last year.
Load more

Recommended publications
  • Inside the World of Taylor Guitars / Volume 85 Summer 2016
    The Taylor Neck Anatomy of a pitch-perfect design Rosewood Revisited The redesigned 700 Series Doobie Brother Pat Simmons Acoustic fingerstyle meets classic rock Dynamic Dreadnoughts 7 must-play models Baritone Basics Expand your musical palette 2 www.taylorguitars.com | dreamed of being involved with forest home I like to play and write with 11s. VOLUME 85 SUMMER 2016 development/management in the way So my answer? Buy another Taylor! I’m Full Recovery Taylor Guitars has been. thinking a new 710e or maybe even Letters The attached photo is of my 2014 First Edition 810e, just as it was Your response to Mr. McKee’s 810e... I’m a sucker for a dreadnought found, 13 days after our home was burglarized and it was stolen. I live in > CONTENTS < Find us on Facebook. Subscribe on YouTube. Follow us on Twitter: @taylorguitars inquiries re-affirmed everything I’ve and love the rosewood/spruce combo. Concord, Vermont, way up in the northeast corner of our state and just ever believed about our inherent I’m very excited for my next purchase! across the Connecticut River from Littleton, New Hampshire. Northern responsibility for good stewardship of Keep making these amazing instru- Lights Music in Littleton is where I fell in love with this guitar and purchased these precious natural resources. Good ments — I’m a fan and Taylor emissary it. Dan and Moocho Salomon at Northern Lights were phenomenal, as stewardship does not mean we — as for life. always, and their beautiful shop is a perfect place for a guitar nut to get lost the human beings whose lives and Kirk O’Brien FEATURES COLUMNS in.
    [Show full text]
  • Voices of the Electric Guitar
    California State University, Monterey Bay Digital Commons @ CSUMB Capstone Projects and Master's Theses 2012 Voices of the electric guitar Don Curnow California State University, Monterey Bay Follow this and additional works at: https://digitalcommons.csumb.edu/caps_thes Recommended Citation Curnow, Don, "Voices of the electric guitar" (2012). Capstone Projects and Master's Theses. 369. https://digitalcommons.csumb.edu/caps_thes/369 This Capstone Project is brought to you for free and open access by Digital Commons @ CSUMB. It has been accepted for inclusion in Capstone Projects and Master's Theses by an authorized administrator of Digital Commons @ CSUMB. Unless otherwise indicated, this project was conducted as practicum not subject to IRB review but conducted in keeping with applicable regulatory guidance for training purposes. For more information, please contact [email protected]. Voices of the Electric Guitar Don Curnow MPA 475 12-12-12 Intro The solid body electric guitar is the result of many guitars and innovations that came before it, followed by the guitar's need for volume to compete with louder instruments, particularly when soloing. In the 1930s, jazz and its various forms incorporated the guitar, but at the time there was no way for an acoustic guitar to compete with the volume of a trumpet or saxophone, let alone with an orchestra of trumpets and saxophones, such as in big band jazz. As a result, amplification of the guitar was born and the electric guitar has been evolving since, from a hollow bodied ES-150 arch-top with a pick-up used by Charlie Christian to the Les Paul played by Slash today.
    [Show full text]
  • Woodworking Glossary, a Comprehensive List of Woodworking Terms and Their Definitions That Will Help You Understand More About Woodworking
    Welcome to the Woodworking Glossary, a comprehensive list of woodworking terms and their definitions that will help you understand more about woodworking. Each word has a complete definition, and several have links to other pages that further explain the term. Enjoy. Woodworking Glossary A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | #'s | A | A-Frame This is a common and strong building and construction shape where you place two side pieces in the orientation of the legs of a letter "A" shape, and then cross brace the middle. This is useful on project ends, and bases where strength is needed. Abrasive Abrasive is a term use to describe sandpaper typically. This is a material that grinds or abrades material, most commonly wood, to change the surface texture. Using Abrasive papers means using sandpaper in most cases, and you can use it on wood, or on a finish in between coats or for leveling. Absolute Humidity The absolute humidity of the air is a measurement of the amount of water that is in the air. This is without regard to the temperature, and is a measure of how much water vapor is being held in the surrounding air. Acetone Acetone is a solvent that you can use to clean parts, or remove grease. Acetone is useful for removing and cutting grease on a wooden bench top that has become contaminated with oil. Across the Grain When looking at the grain of a piece of wood, if you were to scratch the piece perpendicular to the direction of the grain, this would be an across the grain scratch.
    [Show full text]
  • MC-150 Kit Instructions
    MC-150 Kit Instructions Instruction manual for assembly, finish, and setup Written and photographed by Richie Dotson Tools and supplies needed: 3 sheets 220 grit sand paper 3 sheets 400 grit sand paper 1 sheet 600 grit wet dry sand paper 1 wooden sanding block (approximately. 1" x 2" x 3") 1 safety razor 1 metal ruler 2 - 4" spring clamps 1 - 9" spring clamp or cam clamp 1 small, smooth faced hammer 1 hardwood or corian block (approximately. "1/2" x 1/2" x 3) 1 fine, 6" flat file 4 cotton rags (approximately. 1'x1') 1 bowl, able to hold at least 1 cup of liquid 3 drops of dishwashing liquid 1 pair of rubber dish gloves 1 8 oz container of alcohol based stain (optional) 1 roll of 1" masking tape 4 spray cans of lacquer or polyurethane 3 pads of 0000 steel wool 1 bottle of "Meguiar's Mirror Glaze #4" 1 bottle of "Meguiar's Mirror Glaze #7" 1 hand held power drill 1 awl 2 pencils 1 small pair vice grips 1 small square 1 metric wrench set 1 very small allen wrench 1 tape measure 1 small tube of crazy glue 1 small, round file 1 medium size phillips screwdriver 1 set of needle files 1 X-acto knife 1 padded neck support block or bag of buckshot 1 1/4" deep well socket Your kit contains the following items: 1 Maple Neck 1 11" wood rim 1 11" notched tension hoop 1 Flat head alloy tone ring (Optional bell brass available) 1 Resonator (not included in the open back kit) 1 11" Remo frosted banjo head 1 Arm Rest 2 Coordinator rods with hanger bolts (one longer than the other) 1 "L" shaped tailpiece bracket
    [Show full text]
  • H8066 Manual.Indd
    MODEL H8066 MANDOLIN KIT WITHOUT HOLES OWNER'S MANUAL COPYRIGHT © NOVEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #BL8553 PRINTED IN JAPAN �������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������������������������������������������������� ������������������������������������������� �� ���������������������������� �� ������������������������������������������������������������������ �� ���������������������������������������������������� ������������������������������������������������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ��������������������������������������������������������������������� �������������������������� Table of Contents SECTION 1: SAFETY ....................................................................................................................... 2 SECTION 2: INTRODUCTION ......................................................................................................... 3 Foreword .................................................................................................................................... 3 Contact Info ................................................................................................................................ 3 SECTION 3:
    [Show full text]
  • Owners Manual the Proper Care for Your Voyage Air
    OWNERS MANUAL THE PROPER CARE FOR YOUR VOYAGE AIR 925.290.8878 Skype VoyageAirGuitar VoyageAirGuitar.com TABLE OF CONTENTS Instructions on Unpacking Your Voyage Air Guitar Page: 3 Storing your Voyage Air Guitar Page: 4 Humidity/Heat and Wood Page: 5 Cleaning Your Voyage Air Guitar Page: 6 Truss Rod Adjustment Page: 7 Adjusting the Thumbscrew Grommet / Barrel Wrench Page: 8 Brass Shim Installation Page: 10 String Replacement Page: 12 Voyage Air Guitar Limited Warranty Page: 16 Thank you for choosing a Voyage Air Guitar! We know that the ability to travel with your guitar will inspire you to practice, play and share your music with others for many years to come. Follow the simple steps below to ensure your Voyage Air Guitar is ready to play. SHARE YOUR STORY voyageairguitar.com/share-your-story REGISTER YOUR NEW VOYAGE AIR voyageairguitar.com/register SHARE WITH US ON SOCIAL MEDIA facebook.com/voyageair twitter.com/Voyage_Air instagram.com/voyageairguitars 2 Voyage Air Guitar, Inc. • 925.290.8878 INSTRUctIONS FOR UNPACKING YoUR VOYAGE AIR 1. The Voyage Air Guitar is shipped inside a durable backpack-style case (accessory pouch optional). Set this case on a stable surface (like a table) with the flat side down. 2. Unzip and open the case. Do not remove the guitar just yet. 3. The neck of the guitar has a hinge. Lift the neck up and away from the guitar. 4. The body of the guitar is secured in the case with a black nylon strap (the one with the pad for the neck). Undo this strap, while holding the neck of the guitar.
    [Show full text]
  • Tetelestai Guitars LLC. 2021 Repair Services & Rates
    Tetelestai Guitars LLC. 2021 Repair Services & Rates There is a minimum bench rate for repair of $25. The rate I charge is $60/hour of labor, and the rate of each service is priced accordingly. Prices are for labor only, parts will be purchased or ordered from me, or brought to the shop by you. Restring 6-String Acoustic/Electric Guitar…………………………………………… ​$25 Banjo, Bass, Nylon String, Ukulele….................................................. ​$25 12-String Guitar, Mandolin…………………………………………………..... ​$35 Floyd Rose Guitar…………………………………………………….………….... ​$50 Includes: Clean & Condition Fretboard, Polish Body & Replace Strings. *Please note, ​ ​ price of strings is not included* Hardware and Adjustments Strap Buttons 1st Button installation …………………………………………………….. ​$25 2nd Button.…………………………………………………………………..... ​$5 Fill stripped hole and redrill…………………………………………..... ​$25 Intonating Electric ……………………………………………………………………........ ​$25 Floyd Rose/Locking Trem…………………………………………......... ​$35 Setups Setups Include:Clean & Condition Fretboard, Polish Body & Replace ​ Strings, Truss Rod Adjustment, Bridge Height, Nut height, nut slots filed/lubed, Action set to your preference, Pickup Height set, Strobe Dialed Intonation, Fret Inspection and Electronic Inspection. *Please ​ ​ note, fret dressing and resetting is extra* 6-String Acoustic Guitar………………………..……..………………...... ​$60 6-String Electric Guitar……………………………………..……………... ​$60 6-String Electric Guitar + Trem………………………….……………... ​$70 Bass Guitar………………………..……..…………………………………....... ​$60 Mandolin………………………..……..………………………………….........
    [Show full text]
  • W. J. Dyer & Bro. Symphony Harp Mandolins
    © 2019 Gregg Miner www.harpguitarmusic.com All rights reserved. No part of this publication may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval systems, without written permission from the publisher, except in the case of brief quotations embodied in critical articles or reviews. W. J. Dyer & Bro. Symphony Harp Mandolins and the Symphony Harp Plectral Ensemble © 2019 Gregg Miner www.harpguitarmusic.com By Gregg Miner with special contributions from Robert Hartman All rights reserved. No part of this publication may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval systems, without written permission from the publisher, except in the case of brief quotations embodied in critical articles or reviews. Dyer Symphony Harp Plectral Family from Dyer extant specimens The Cadenza, 1917-1918 1 Foreword Though the sight of the unusual instrument may be familiar to harp guitar aficionados and fans of fretted instruments built by the Larson brothers, its history has remained little understood. Indeed, the story of the Dyer harp mandolin has been one of those musical instrument histories that seemed destined to perpetually remain “to be determined.” There were always simply too many unanswered questions. For example, when I first wrote online on the subject in 2002, there wasn’t a single harp mandola known. Neither could we then confirm – let alone explain – the existence of the “backwards 1908 harp mandolin.” By 2018, after the discovery of a late 1907 W. J. Dyer & Bro. catalog along with many additional instrument discoveries (we have now found five harp mandolas!), things started to fall into place.
    [Show full text]
  • Solo MM Style DIY Electric Bass Guitar
    Solo AD Style DIY Acoustic Guitar Kit Assembly Manual ADK-1 V 2.0 Copyright © 2017 Solo Music Gear. All rights reserved Solo ADK Style DIY Electric Guitar Kit Show Off Your Custom Built Guitar! When you have your guitar finished, please take a few pictures and send them to us for potential posting into the picture gallery on our website. Post your photos to our Facebook page http://Facebook.com/SoloMusicGear Remember, you can always find us online at SoloMusicGear.com to upgrade your parts, try a new kit, or ask us a question. Alternatively you can call us at 1-800-632-SOLO (7656) for any questions that you might have. Copyright © 2017 Solo Music Gear. All rights reserved v2.0 | 1 Solo ADK Style DIY Electric Guitar Kit Hi! Welcome to Solo DIY Instrument kits, and congratulations on either starting or continuing a terrific new hobby! Thank you for purchasing a Solo DIY guitar kit. This unfinished guitar kit has everything for building an Acoustic guitar – you will need only some basic tools and finishing supplies. All challenging wood cutting, drilling and shaping is already professionally done, as well as fret leveling and dressing. We hope that you will find everything either equal to or exceeding your expectations with this Solo DIY Instrument kit. We are however human, so if there is something in this kit that you have a question about, please feel free to contact us at www.solomusicgear.com , we will be happy to answer all your questions. Remember, all the major manufacturing has been professionally completed on this instrument.
    [Show full text]
  • Owner's Manual
    Ovation guitars are played by countless musicians around the world including: Joan Armatrading Dj Ashba Charlie Benante - Anthrax Chad Benekos - HED(PE) Glen Campbell Julian Coryell Kevin Cronin - REO Speedwagon Al Di Meola Melissa Etheridge Robert Fripp Nick Hexum - 311 J’Anna Jacoby Davey Johnstone - Elton John Patrick Kennison - Union Un der ground Kittie Lenny Kravitz Cyndi Lauper Adrian Legg Steve Lukather Yngwie J. Malmsteen Preston Reed Ruben Ruiz Shakira Matt Smith Aaron Tippin Shania Twain OWNER'S MANUAL OvationGuitars.com Ovation Instruments Division of Kaman Music Corporation Printed in U.S.A. 37 Greenwoods Rd., New Hartford, CT 06057 990157-L 8/04 Congratulations on buying an Ovation RoundbackTM Gui tar. Care And Maintenance Since its introduction in 1966, the Ova tion RoundbackTM has Like all fi ne instruments, Ovation RoundbackTM guitars require been acclaimed the world over for its dramatic technical pe ri od ic care and maintenance. Your in strument will perform advances and musical refi nements that literally changed the best if it is kept clean. A routine cleaning of the instrument using shape of music. a clean lint-free cloth and a light coat of a quality guitar polish will keep your Roundback looking and performing at its peak. This owner's manual has been prepared to acquaint you with Gold-plated parts especially should be wiped clean after each details of the special features found on your Roundback, playing to prevent corrosion from body acids. and to provide you with the facts and tips you will need to maintain your guitar. More detailed information concerning the de sign, manufacture, and materials used in the making of We strongly recommend the purchase and use of an Ovation TM your Ovation RoundbackTM can be found in Ovation lit er a ture Roundback molded guitar case.
    [Show full text]
  • Archtop Build Journal
    Archtop Build Journal By Mike Conner Fifth Edition © September 2016 Archtop Build Journal Forward I have played guitar for over 40 years now, worked as an engineer for 34 years, and a woodworker for at least 30 years. These combine d to drive a strong interest in instrument construction, especially guitars, mandolins and upright basses. Having read, studied and thought about these instruments for many years, we now have been blessed with the opportunity to attempt to build some from scratch. It would have been easier to build from a kit. Since I have done hundreds of guitar setups and built much of the furniture, cabinets and even our front door in our home, it seemed like a great challenge to build instruments starting from the milled lumber. We humbly submit this journal detailing much of the process used to build a guitar and octave mandolin in the hope that it will help others understand how to build an instrument in a home shop primarily with normal woodworking tools. This project would not have been possible without the many blessings God has granted us. With some modest abilities, reasonable resources, a shop full of tools, and the love and patience of a wonderful bride I was able to fulfill a life-long dream. Mike Conner Seneca, South Carolina September 2013 Previous Editions: First Edition - September 2013 Second Edition – October 2014 Third Edition – June 2015 Fourth Edition – April 2016 [1] Archtop Build Journal Table of Contents Introduction Background Research and Design Preparation Molds and Jigs Milling Wood Body Bending
    [Show full text]
  • 2011 Owner's Manual for Fender Basses
    OWNER’S MANUAL FOR FENDER ® BASSES Si necesita acceder a los manuales de instrucciones de las guitarras bajos en Español, visite nuestra página web http://www.fender.com/support Vous trouverez le mode d’emploi des guitares basses Fender® en français sur le site Internet http://www.fender.com/support Il manuale d’uso dei bassi Fender® in Italiano è disponibile nel nostro sito web http://www.fender.com/support Das Fender Bedienungshandbuch für Bässe in Deutsch, finden Sie auf unserer Websitehttp:// www.fender.com/support Se desejar ler o manual do proprietário Fender® para baixos em português, por favor, visite nosso website em http://www.fender.com/support Languages 日本語のベースギター用 Fender オーナーズ･マニュアルは、弊社のウェブサイト http://www.fender.com/support をご参照ください。 1 Congratulations, you’ve just purchased a piece of history from Fender Musical Instruments, the company that brought the solid body electric bass guitar to the world. Whether you are new to the bass or even if you’ve been playing for years, this manual will give you all the information you need to take the mystery out of tuning, changing strings, setup, adjustment, intonation, care, and maintenance of your bass. It’s easy! And once you’ve learned Family how to care for your bass properly, you’ll find that it will take ® great care of you too, by providing a wonderful vehicle for years of fun, creativity, and musical self-expression. With that in mind, we hope you’ll take a few moments to read through this entire owner’s manual. You’ll be glad you did! Fender Welcome to the 2 History From the Beginning… Fender---our very name is synonymous with all things bass.
    [Show full text]