DOCSLIB.ORG

Tetelestai Guitars LLC. 2021 Repair Services & Rates

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Tetelestai Guitars LLC. 2021 Repair Services & Rates Tetelestai Guitars LLC. 2021 Repair Services & Rates There is a minimum bench rate for repair of $25. The rate I charge is $60/hour of labor, and the rate of each service is priced accordingly. Prices are for labor only, parts will be purchased or ordered from me, or brought to the shop by you. Restring 6-String Acoustic/Electric Guitar…………………………………………… ​$25 Banjo, Bass, Nylon String, Ukulele….................................................. ​$25 12-String Guitar, Mandolin…………………………………………………..... ​$35 Floyd Rose Guitar…………………………………………………….………….... ​$50 Includes: Clean & Condition Fretboard, Polish Body & Replace Strings. *Please note, ​ ​ price of strings is not included* Hardware and Adjustments Strap Buttons 1st Button installation …………………………………………………….. ​$25 2nd Button.…………………………………………………………………..... ​$5 Fill stripped hole and redrill…………………………………………..... ​$25 Intonating Electric ……………………………………………………………………........ ​$25 Floyd Rose/Locking Trem…………………………………………......... ​$35 Setups Setups Include:Clean & Condition Fretboard, Polish Body & Replace ​ Strings, Truss Rod Adjustment, Bridge Height, Nut height, nut slots filed/lubed, Action set to your preference, Pickup Height set, Strobe Dialed Intonation, Fret Inspection and Electronic Inspection. *Please ​ ​ note, fret dressing and resetting is extra* 6-String Acoustic Guitar………………………..……..………………...... ​$60 6-String Electric Guitar……………………………………..……………... ​$60 6-String Electric Guitar + Trem………………………….……………... ​$70 Bass Guitar………………………..……..…………………………………....... ​$60 Mandolin………………………..……..………………………………….......... ​$70 Ukulele………………………..……..…………………………………….......... ​$60 12-String Guitars……………………………………………....…..... ​Add $30 Floyd Rose/Locking Trem……………………………………………....... ​$90 6-string LONG SADDLE………………………………………………….... ​$75 Add-ons: Shim neck……………………………………………………………...….$10 ​ Add string tree……………………………………………………………..…. ​$8 each Remove, shim & re-cut nut…………………………………….……….. ​$20 Fill & re-cut nut slots…………………………………………………….... ​$8 each Extra dirty guitar and/or stickers removed………………………... ​$15 Complete Fret Polish……………………………...………………………... ​$25 Custom Nuts 6-String Guitar, Bass, Banjo, Mandolin………………….…….. ​$60 *With Setup*…………………………………………………….. ​$110 12-String Guitar………………….……………………………………... ​$85 *With Setup*…………………………………………………….. ​$140 Includes: Labor of creating custom, hand-made nut for increased tone, ​ sustain, and resonance. Can use bone, TUSQ, graphite, brass, plastic, or other material. Costs may vary. Premade Nuts Installation (Graphtech, TUSQ, Bone...etc.) 6-String Guitar, Bass, Banjo, Mandolin………………….…….. ​$20-50 *With Setup*…………………………………………..... ​Add $60 12-String Guitar………………….……………………………………... ​$20-50 *With Setup*…………………………………………… ​Add $75 Includes: Labor of creating custom nut for increased tone, sustain, and ​ resonance. Can use bone, corian, graphite, brass, plastic, or other material. Costs may vary. Price is for labor only, the material cost is reflective ​ of the cost of the material. Custom Saddle Uncompensated…………………………………………………………….………….. ​$50 Compensated……………………………………………………………………….…... ​$60 12-String Uncompensated………………………………………………………….. ​$60 12-String Compensated……………………………………………………….…….. ​$70 Long Uncompensated……………………………………………….……………….. ​$70 Long Compensated………………………………………………………………..….. ​$80 Pre-Made………………………………………..….. ​Cost of Material + Setup Includes: Labor of creating custom nut for increased tone, sustain, and ​ resonance. Can use bone, corian, graphite, brass, plastic, or other material. Costs may vary based on cost of material used. Tuning Machines Installation……………………………...…………………........................ ​$30 Installation with Reaming/Drilling………………………................ ​$60-$90 Install + Fill Holes….………………………........................................ ​$80 Replace Broken Tuner Buttons…………………...………...………… ​$40 Includes: Reaming, drilling, and retrofitting. ​ Inlay Work Labor per hour…………………………………………………………....................... ​$60 Fretwork A fret dressing is recommended when frets have become worn out in areas, and it's playability has suffered (ex. buzzing out in areas). Other times due to natural shifting of the wood, the frets become no longer uniformly level. A discerning player may choose to get his/her new guitar dressed because of the imperfections of a factory setup, and after the initial settling-in period, it will likely need it. When dressing the frets, all frets are seated and levelled to uniform height across the neck, re-shaped and polished. A refret is necessary when frets are worn out and need to be replaced. Frets are removed, the neck is checked for straightness, re-surfaced when necessary, new frets are pressed in, assured to be levelled to a uniform height, reshaped and polished. Finish work extra. Costs do not include restring & setup. ​ Spot Leveling/Recrown…………..………………………………………... ​$10/Fret Recrown Frets……………………………………………………….............. ​$4/Fret Level, Crown, Polish……………………………………………………….... ​$120 Fret Replacement…………………………………………………………….. ​$15/Fret Fingerboard Wear/Cracks……………………………………………..….. ​$60/hour Seat and Glue Loose Frets………………………………………..….. ​Starts at $25 Dressing Sharp Fret Ends………………………………………..….. ​Starts at $30 Refret 6-String Guitar, Bass, Banjo………………………………………………….... ​$300 12 String Guitar, Mandolin………….……………………………................... ​$350 Includes: Fretwire, Level-Crown-Polish, Full Setup. ​ ​ Acoustic Bridges 6-String Guitar Reglue……………………………………………...Starts at ​$120 12 String Guitar, Mandolin………….……………………………................... ​$150 Planing and Reshaping…………………………………………………………… ​$60 Seal cracked acoustic guitar bridge…..……………………………………… ​$45 NEW Stock Replacement………………….…....Starts at ​$120 + Materials NEW Custom Bridge…………………...............Starts at ​$250 + Materials Includes: Cleaning/repairing under bridge, shaping bottom of bridge to fit ​ ​ top, saddle inspection, saddle slot inspection, brace inspection, bridge pad inspection, Reglue Bridge. Glue used is specific to the guitar. May require removal THEN reglue. Saddle Slot 6-String Guitar, Acoustic Bass--Recut……………………………………........ ​$30 12 String Guitar, Mandolin--Recut…….……………………………................. ​$30 6-String Guitar, Acoustic Bass--Plug and Recut………………………….... ​$90 12 String Guitar, Mandolin--Plug and Recut…….…………………............. ​$100 Electric Guitar Bridges Hardtail Bridge, Retrofit…………………….…..……....... ​$30 + Materials Tremolo Bridge…………………………............................. ​$50 +Materials New Hardtail Bridge: Non-Retrofit (includes plugging/redrilling….. ​$100 + Materials Binding Reglue No Finish Touch-Up…………………………………………………..Starts at ​$30 Finish-Touch Up………….……………………………....................Starts at ​$60 Acoustic Pickguard Re-glue…………………………………………………………...................... ​$25 New Custom Pickguard, Over Finish….………………………........ ​$150 Replace with Tortoise, Over Finish…………………...……………... ​$75 Replace with Black, Over Finish…………………………………….… ​$60 Replace with Clear, Over Finish………………………………………. ​$60 Replace with Other, Over Finish………………………………...…… ​$60-$120 Added over finish…………………………………………..…… ​$25 + Materials Includes: Remove old pickguard, clean area, shape and fit pickguard, ​ ​ create beveled pickguard, buffed, reglued, and materials. Electronics Install Under-Saddle Pickup/Preamp.................... ​$80 + Cost of Setup Install Soundhole Pickup……………...….……………………….. ​$30 Replace Undersaddle Pickup…………………………………...... ​$60 Electric Guitar Pickguard Replacement……………………… ​$30 Control Pot or 3-Way Switch Replacement……….............. ​$25-45 *$10 for each additional. 5-Way Strat Style Pickup Selector Replacement.……….... ​$45 Shield Control Cavity……………………………………………..… ​$60 Electric Pickups Solid Body Install, 1st Pickup………………..………............... ​$30 *Additional: $15 per pickup Rout and Install Pickup….………………………………….......... ​$90 Replace Output Jack…………………...…………….……………... ​$30 Replace Potentiometer or Mini-Switch..……………….…….. ​$25 *Additional: $10 each Install Mini-Switch………………………………………………….. ​$45 Replace Les Paul 3-Way Pickup Selector……………………. ​$30 Complete Rewire/Wiring Mods………………………………....$60/hour ​ ​ Includes: Labor only ​ ​ Structural Brace Reglue………….………. ​$45 + $10 each additional Headstock repair, No Touch-Up……………. ​Begins at $60 Crack Repair, Up to 3”………………...………. ​$60-$120 Crack Repair, Up to 6”……………………….... ​Begins at $120 Crack Repair, Multiple, Quoted……………. ​Begins at $60 Custom Projects….Ah Yes, the Good Stuff! I offer kits and custom assembled guitars. All project guitars (aka Frankenstrats, Frankenteles, Franken….guitars, mix and matched, etc.), custom guitar routing, parts installation, building & electronics are billed out at $45/hour shop rate. Definitive labor costs cannot be perfectly estimated due to the nature of the work required (but we will give it our closest guess based on what we chat about!) ● Assemble electric guitar kits or custom guitar projects……... ​starts at $300. ​ ● Replace/ install new bolt-on neck w/hardware….……... ​starts at $150. ● Install pickguard, pickups, electronics, hardware, wire-up……………...starts at $160. ​ ​ ​ ​ ● Custom Inlay work…………. ​starts at $60 LET’S MAKE SOMETHING COOL! Anything Else….………………….Shop rate of $60/Hour, Quoted. New this year to the Repair List: ● Restoration Work ● Lightly Buffing Finish, Hand Buff ● Headstock Logo Restoration, Vinyl ● Brass Nut ● Crack Repair ○ Top Cracks ○ Back Cracks ○ Cleats ● Staining Fretboard (Ebonizing) ● Neck Snap Reglue ● Change out pickup rings ● Semi-Hollow Wiring ● Fretboard Hump--Planing, Shaping, Adding Ramp ● Bridge--Planing Top ● New parts--strings, bridge pins, tuners...etc .
Load more

Recommended publications
  • Inside the World of Taylor Guitars / Volume 85 Summer 2016
    The Taylor Neck Anatomy of a pitch-perfect design Rosewood Revisited The redesigned 700 Series Doobie Brother Pat Simmons Acoustic fingerstyle meets classic rock Dynamic Dreadnoughts 7 must-play models Baritone Basics Expand your musical palette 2 www.taylorguitars.com | dreamed of being involved with forest home I like to play and write with 11s. VOLUME 85 SUMMER 2016 development/management in the way So my answer? Buy another Taylor! I’m Full Recovery Taylor Guitars has been. thinking a new 710e or maybe even Letters The attached photo is of my 2014 First Edition 810e, just as it was Your response to Mr. McKee’s 810e... I’m a sucker for a dreadnought found, 13 days after our home was burglarized and it was stolen. I live in > CONTENTS < Find us on Facebook. Subscribe on YouTube. Follow us on Twitter: @taylorguitars inquiries re-affirmed everything I’ve and love the rosewood/spruce combo. Concord, Vermont, way up in the northeast corner of our state and just ever believed about our inherent I’m very excited for my next purchase! across the Connecticut River from Littleton, New Hampshire. Northern responsibility for good stewardship of Keep making these amazing instru- Lights Music in Littleton is where I fell in love with this guitar and purchased these precious natural resources. Good ments — I’m a fan and Taylor emissary it. Dan and Moocho Salomon at Northern Lights were phenomenal, as stewardship does not mean we — as for life. always, and their beautiful shop is a perfect place for a guitar nut to get lost the human beings whose lives and Kirk O’Brien FEATURES COLUMNS in.
    [Show full text]
  • Voices of the Electric Guitar
    California State University, Monterey Bay Digital Commons @ CSUMB Capstone Projects and Master's Theses 2012 Voices of the electric guitar Don Curnow California State University, Monterey Bay Follow this and additional works at: https://digitalcommons.csumb.edu/caps_thes Recommended Citation Curnow, Don, "Voices of the electric guitar" (2012). Capstone Projects and Master's Theses. 369. https://digitalcommons.csumb.edu/caps_thes/369 This Capstone Project is brought to you for free and open access by Digital Commons @ CSUMB. It has been accepted for inclusion in Capstone Projects and Master's Theses by an authorized administrator of Digital Commons @ CSUMB. Unless otherwise indicated, this project was conducted as practicum not subject to IRB review but conducted in keeping with applicable regulatory guidance for training purposes. For more information, please contact [email protected]. Voices of the Electric Guitar Don Curnow MPA 475 12-12-12 Intro The solid body electric guitar is the result of many guitars and innovations that came before it, followed by the guitar's need for volume to compete with louder instruments, particularly when soloing. In the 1930s, jazz and its various forms incorporated the guitar, but at the time there was no way for an acoustic guitar to compete with the volume of a trumpet or saxophone, let alone with an orchestra of trumpets and saxophones, such as in big band jazz. As a result, amplification of the guitar was born and the electric guitar has been evolving since, from a hollow bodied ES-150 arch-top with a pick-up used by Charlie Christian to the Les Paul played by Slash today.
    [Show full text]
  • Woodworking Glossary, a Comprehensive List of Woodworking Terms and Their Definitions That Will Help You Understand More About Woodworking
    Welcome to the Woodworking Glossary, a comprehensive list of woodworking terms and their definitions that will help you understand more about woodworking. Each word has a complete definition, and several have links to other pages that further explain the term. Enjoy. Woodworking Glossary A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | #'s | A | A-Frame This is a common and strong building and construction shape where you place two side pieces in the orientation of the legs of a letter "A" shape, and then cross brace the middle. This is useful on project ends, and bases where strength is needed. Abrasive Abrasive is a term use to describe sandpaper typically. This is a material that grinds or abrades material, most commonly wood, to change the surface texture. Using Abrasive papers means using sandpaper in most cases, and you can use it on wood, or on a finish in between coats or for leveling. Absolute Humidity The absolute humidity of the air is a measurement of the amount of water that is in the air. This is without regard to the temperature, and is a measure of how much water vapor is being held in the surrounding air. Acetone Acetone is a solvent that you can use to clean parts, or remove grease. Acetone is useful for removing and cutting grease on a wooden bench top that has become contaminated with oil. Across the Grain When looking at the grain of a piece of wood, if you were to scratch the piece perpendicular to the direction of the grain, this would be an across the grain scratch.
    [Show full text]
  • MC-150 Kit Instructions
    MC-150 Kit Instructions Instruction manual for assembly, finish, and setup Written and photographed by Richie Dotson Tools and supplies needed: 3 sheets 220 grit sand paper 3 sheets 400 grit sand paper 1 sheet 600 grit wet dry sand paper 1 wooden sanding block (approximately. 1" x 2" x 3") 1 safety razor 1 metal ruler 2 - 4" spring clamps 1 - 9" spring clamp or cam clamp 1 small, smooth faced hammer 1 hardwood or corian block (approximately. "1/2" x 1/2" x 3) 1 fine, 6" flat file 4 cotton rags (approximately. 1'x1') 1 bowl, able to hold at least 1 cup of liquid 3 drops of dishwashing liquid 1 pair of rubber dish gloves 1 8 oz container of alcohol based stain (optional) 1 roll of 1" masking tape 4 spray cans of lacquer or polyurethane 3 pads of 0000 steel wool 1 bottle of "Meguiar's Mirror Glaze #4" 1 bottle of "Meguiar's Mirror Glaze #7" 1 hand held power drill 1 awl 2 pencils 1 small pair vice grips 1 small square 1 metric wrench set 1 very small allen wrench 1 tape measure 1 small tube of crazy glue 1 small, round file 1 medium size phillips screwdriver 1 set of needle files 1 X-acto knife 1 padded neck support block or bag of buckshot 1 1/4" deep well socket Your kit contains the following items: 1 Maple Neck 1 11" wood rim 1 11" notched tension hoop 1 Flat head alloy tone ring (Optional bell brass available) 1 Resonator (not included in the open back kit) 1 11" Remo frosted banjo head 1 Arm Rest 2 Coordinator rods with hanger bolts (one longer than the other) 1 "L" shaped tailpiece bracket
    [Show full text]
  • H8066 Manual.Indd
    MODEL H8066 MANDOLIN KIT WITHOUT HOLES OWNER'S MANUAL COPYRIGHT © NOVEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #BL8553 PRINTED IN JAPAN �������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������������������������������������������������� ������������������������������������������� �� ���������������������������� �� ������������������������������������������������������������������ �� ���������������������������������������������������� ������������������������������������������������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ��������������������������������������������������������������������� �������������������������� Table of Contents SECTION 1: SAFETY ....................................................................................................................... 2 SECTION 2: INTRODUCTION ......................................................................................................... 3 Foreword .................................................................................................................................... 3 Contact Info ................................................................................................................................ 3 SECTION 3:
    [Show full text]
  • Owners Manual the Proper Care for Your Voyage Air
    OWNERS MANUAL THE PROPER CARE FOR YOUR VOYAGE AIR 925.290.8878 Skype VoyageAirGuitar VoyageAirGuitar.com TABLE OF CONTENTS Instructions on Unpacking Your Voyage Air Guitar Page: 3 Storing your Voyage Air Guitar Page: 4 Humidity/Heat and Wood Page: 5 Cleaning Your Voyage Air Guitar Page: 6 Truss Rod Adjustment Page: 7 Adjusting the Thumbscrew Grommet / Barrel Wrench Page: 8 Brass Shim Installation Page: 10 String Replacement Page: 12 Voyage Air Guitar Limited Warranty Page: 16 Thank you for choosing a Voyage Air Guitar! We know that the ability to travel with your guitar will inspire you to practice, play and share your music with others for many years to come. Follow the simple steps below to ensure your Voyage Air Guitar is ready to play. SHARE YOUR STORY voyageairguitar.com/share-your-story REGISTER YOUR NEW VOYAGE AIR voyageairguitar.com/register SHARE WITH US ON SOCIAL MEDIA facebook.com/voyageair twitter.com/Voyage_Air instagram.com/voyageairguitars 2 Voyage Air Guitar, Inc. • 925.290.8878 INSTRUctIONS FOR UNPACKING YoUR VOYAGE AIR 1. The Voyage Air Guitar is shipped inside a durable backpack-style case (accessory pouch optional). Set this case on a stable surface (like a table) with the flat side down. 2. Unzip and open the case. Do not remove the guitar just yet. 3. The neck of the guitar has a hinge. Lift the neck up and away from the guitar. 4. The body of the guitar is secured in the case with a black nylon strap (the one with the pad for the neck). Undo this strap, while holding the neck of the guitar.
    [Show full text]
  • W. J. Dyer & Bro. Symphony Harp Mandolins
    © 2019 Gregg Miner www.harpguitarmusic.com All rights reserved. No part of this publication may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval systems, without written permission from the publisher, except in the case of brief quotations embodied in critical articles or reviews. W. J. Dyer & Bro. Symphony Harp Mandolins and the Symphony Harp Plectral Ensemble © 2019 Gregg Miner www.harpguitarmusic.com By Gregg Miner with special contributions from Robert Hartman All rights reserved. No part of this publication may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval systems, without written permission from the publisher, except in the case of brief quotations embodied in critical articles or reviews. Dyer Symphony Harp Plectral Family from Dyer extant specimens The Cadenza, 1917-1918 1 Foreword Though the sight of the unusual instrument may be familiar to harp guitar aficionados and fans of fretted instruments built by the Larson brothers, its history has remained little understood. Indeed, the story of the Dyer harp mandolin has been one of those musical instrument histories that seemed destined to perpetually remain “to be determined.” There were always simply too many unanswered questions. For example, when I first wrote online on the subject in 2002, there wasn’t a single harp mandola known. Neither could we then confirm – let alone explain – the existence of the “backwards 1908 harp mandolin.” By 2018, after the discovery of a late 1907 W. J. Dyer & Bro. catalog along with many additional instrument discoveries (we have now found five harp mandolas!), things started to fall into place.
    [Show full text]
  • Solo MM Style DIY Electric Bass Guitar
    Solo AD Style DIY Acoustic Guitar Kit Assembly Manual ADK-1 V 2.0 Copyright © 2017 Solo Music Gear. All rights reserved Solo ADK Style DIY Electric Guitar Kit Show Off Your Custom Built Guitar! When you have your guitar finished, please take a few pictures and send them to us for potential posting into the picture gallery on our website. Post your photos to our Facebook page http://Facebook.com/SoloMusicGear Remember, you can always find us online at SoloMusicGear.com to upgrade your parts, try a new kit, or ask us a question. Alternatively you can call us at 1-800-632-SOLO (7656) for any questions that you might have. Copyright © 2017 Solo Music Gear. All rights reserved v2.0 | 1 Solo ADK Style DIY Electric Guitar Kit Hi! Welcome to Solo DIY Instrument kits, and congratulations on either starting or continuing a terrific new hobby! Thank you for purchasing a Solo DIY guitar kit. This unfinished guitar kit has everything for building an Acoustic guitar – you will need only some basic tools and finishing supplies. All challenging wood cutting, drilling and shaping is already professionally done, as well as fret leveling and dressing. We hope that you will find everything either equal to or exceeding your expectations with this Solo DIY Instrument kit. We are however human, so if there is something in this kit that you have a question about, please feel free to contact us at www.solomusicgear.com , we will be happy to answer all your questions. Remember, all the major manufacturing has been professionally completed on this instrument.
    [Show full text]
  • Owner's Manual
    Ovation guitars are played by countless musicians around the world including: Joan Armatrading Dj Ashba Charlie Benante - Anthrax Chad Benekos - HED(PE) Glen Campbell Julian Coryell Kevin Cronin - REO Speedwagon Al Di Meola Melissa Etheridge Robert Fripp Nick Hexum - 311 J’Anna Jacoby Davey Johnstone - Elton John Patrick Kennison - Union Un der ground Kittie Lenny Kravitz Cyndi Lauper Adrian Legg Steve Lukather Yngwie J. Malmsteen Preston Reed Ruben Ruiz Shakira Matt Smith Aaron Tippin Shania Twain OWNER'S MANUAL OvationGuitars.com Ovation Instruments Division of Kaman Music Corporation Printed in U.S.A. 37 Greenwoods Rd., New Hartford, CT 06057 990157-L 8/04 Congratulations on buying an Ovation RoundbackTM Gui tar. Care And Maintenance Since its introduction in 1966, the Ova tion RoundbackTM has Like all fi ne instruments, Ovation RoundbackTM guitars require been acclaimed the world over for its dramatic technical pe ri od ic care and maintenance. Your in strument will perform advances and musical refi nements that literally changed the best if it is kept clean. A routine cleaning of the instrument using shape of music. a clean lint-free cloth and a light coat of a quality guitar polish will keep your Roundback looking and performing at its peak. This owner's manual has been prepared to acquaint you with Gold-plated parts especially should be wiped clean after each details of the special features found on your Roundback, playing to prevent corrosion from body acids. and to provide you with the facts and tips you will need to maintain your guitar. More detailed information concerning the de sign, manufacture, and materials used in the making of We strongly recommend the purchase and use of an Ovation TM your Ovation RoundbackTM can be found in Ovation lit er a ture Roundback molded guitar case.
    [Show full text]
  • Archtop Build Journal
    Archtop Build Journal By Mike Conner Fifth Edition © September 2016 Archtop Build Journal Forward I have played guitar for over 40 years now, worked as an engineer for 34 years, and a woodworker for at least 30 years. These combine d to drive a strong interest in instrument construction, especially guitars, mandolins and upright basses. Having read, studied and thought about these instruments for many years, we now have been blessed with the opportunity to attempt to build some from scratch. It would have been easier to build from a kit. Since I have done hundreds of guitar setups and built much of the furniture, cabinets and even our front door in our home, it seemed like a great challenge to build instruments starting from the milled lumber. We humbly submit this journal detailing much of the process used to build a guitar and octave mandolin in the hope that it will help others understand how to build an instrument in a home shop primarily with normal woodworking tools. This project would not have been possible without the many blessings God has granted us. With some modest abilities, reasonable resources, a shop full of tools, and the love and patience of a wonderful bride I was able to fulfill a life-long dream. Mike Conner Seneca, South Carolina September 2013 Previous Editions: First Edition - September 2013 Second Edition – October 2014 Third Edition – June 2015 Fourth Edition – April 2016 [1] Archtop Build Journal Table of Contents Introduction Background Research and Design Preparation Molds and Jigs Milling Wood Body Bending
    [Show full text]
  • 2011 Owner's Manual for Fender Basses
    OWNER’S MANUAL FOR FENDER ® BASSES Si necesita acceder a los manuales de instrucciones de las guitarras bajos en Español, visite nuestra página web http://www.fender.com/support Vous trouverez le mode d’emploi des guitares basses Fender® en français sur le site Internet http://www.fender.com/support Il manuale d’uso dei bassi Fender® in Italiano è disponibile nel nostro sito web http://www.fender.com/support Das Fender Bedienungshandbuch für Bässe in Deutsch, finden Sie auf unserer Websitehttp:// www.fender.com/support Se desejar ler o manual do proprietário Fender® para baixos em português, por favor, visite nosso website em http://www.fender.com/support Languages 日本語のベースギター用 Fender オーナーズ･マニュアルは、弊社のウェブサイト http://www.fender.com/support をご参照ください。 1 Congratulations, you’ve just purchased a piece of history from Fender Musical Instruments, the company that brought the solid body electric bass guitar to the world. Whether you are new to the bass or even if you’ve been playing for years, this manual will give you all the information you need to take the mystery out of tuning, changing strings, setup, adjustment, intonation, care, and maintenance of your bass. It’s easy! And once you’ve learned Family how to care for your bass properly, you’ll find that it will take ® great care of you too, by providing a wonderful vehicle for years of fun, creativity, and musical self-expression. With that in mind, we hope you’ll take a few moments to read through this entire owner’s manual. You’ll be glad you did! Fender Welcome to the 2 History From the Beginning… Fender---our very name is synonymous with all things bass.
    [Show full text]
  • COLORADO LUTHIER MEMBERSHIP Date Name/Company Phone E-Mail /WEB Page Information
    COLORADO LUTHIER MEMBERSHIP Date Name/Company Phone e-Mail /WEB Page Information 2/9/14 Amend, Richard [email protected] Attending Colorado School of Luthier second class with Edward Dick (guitar #1 = dreadnought, guitar #2 = 12-string). I'm still in hobby-mode, but I do want to get proficient enough over the next six years to be able to teach a beginning course (ukelele?) to high school age students. 2/26/14 Anderson, David 972-342-6545 [email protected] Steel string guitar builder in Loveland, CO August Guitars www.augustguitars.com 4/5/14 Anderson, Joseph [email protected] I have built one guitar, a J--45 style model. Cannot wait to build a second, but i'm finishing up nursing school so the funds are limited but only for a bit longer! 3/9/14 Anthony, Michael 970/361-8577 [email protected] Steel and nylon string guitars, dabbling with www.MichaelAnthonyGuitars.com electric guitar kits Aslakson, Patrick 303/766-8592 [email protected] Head Pinwheel of the Colorado Luthiers. home guitar player/Just Beginning 720/261-3960 Lutherie/Looking for first guitar cell kit/Possible business opportunity Bailey, Kent A. http://www.kabart.com Master Woodcarver, Artist, Sculptor Wood Creations [email protected] [email protected] Bashkin, Michael 970/495-1011 [email protected] Steel String Guitars http://bashkinguitars.com Bresnan, Jerry Brodoway, 303/722-0518 [email protected] Hobbyist Luthier / Woodworker Russell (cell & home) Built my first guitar with no training in 2006 as an art project, but it was more art than guitar.
    [Show full text]