Volume: 58 SPRING 2012 £1.00

CALL TODAY 01706 658 619 Prices valid until 31st July 2012

ORDER ONLINE The Specialist for High Quality www.frost.co.uk Tools and Equipment for the Classic Vehicle Restorer

Back on the Road Again! FOR ORDERS OVER £75 FREE P&P WIN a MIG 175 WELDER worth £349.00 See Page 99 for Details In this edition of the Frost catalogue, you’ll find it packed with the usual selection of Welcome to our New Spring 2012 Catalogue at Frost

Take a look inside at the range of exciting new products we have sourced to add to our extensive range of automotive tools. Not only that, to make it more interesting, we also have added some Special Deals to get you excited, check out pages 87, 99. By taking advantage of technology, new products and offers are frequently updated on our recently revamped website. So don't miss out - visit www.frost.co.uk The Frost Team This Spring’s Hottest NEW Acquisitions!

N900 Pow-R-Liner ™ Kit £140.00 N902 Pow-R-Liner™ Black Paint £35.00

Tough, Moisture-Resistant, Floor Armor™ Non-Slip Coating N905 Light Grey £228.00 (1-1/2 Car Garage) ™ N906 Dark Grey £228.00 (1-1/2 Car Garage) POW-R-LINER Truck Bed Coating is a spray- on system that creates a tough, moisture- N907 Light Grey £299.00 (2-1/2 Car Garage) resistant, non-slip coating. Standard drop-in (2-1/2 Car Garage) N908 Dark Grey £299.00 bedliners trap moisture under the liner, promoting rust and corrosion. In addition, their Now, Seal Your Floor Permanently, with plastic surface can be slippery and subject to All-New Floor Armor™ Floor Painting Kits cracking and tearing. Unlike these drop-in liners, POW-R-LINER™ bonds directly to the No need for acids; no need to flood your floor with water. Just use our easy surface and will not chip or peel, and most degreaser on any heavy oil or grease stains, vacuum away any dust or dirt, importantly, will keep out rust! POW-R-LINER™ and paint right over everything with Floor Armor. Get the same fantastic results is engineered to be applied on top of POR-15® you have come to expect from world-famous POR-15 Rust Preventive Paint. Rust Preventive Paint for the ultimate in Use Floor Armor in heavy traffic areas. It can take the abuse from forklifts, floor protection. (Rust, salt and temperature jacks, and constant traffic. Once your floor is covered with Floor Armor, you'll resistant). Needs airline. wipe up oil and grease stains with a rag, and keep dust down too. Uses: Truck Beds,- Dump Trucks – Haulers - Kit contains: Color Topcoat, Hardener/Activator, Grease and Oil Remover, Cargo Containers – Bulkheads - Loading Docks Non-slip Aggregate, 1 - 1/4" Nap Roller, 1 - 1/2" Nap Roller, 1 - 9" Birdcage Marine applications such as Decks – Steps – Frame, 2.5" Chip Brush, Stir Stick and Rubber Gloves. Railings - Anti Slip Applications - Step Bumpers.

GUARANTEE If you are not satisfied with any item, we will replace or refund the full price providing the item is returned to us unused and in good condition within 14 days. We will repair, replace or give a full refund on any item which does not give reasonable service due to defective materials or workmanship. All items are described and illustrated to the best of our knowledge at the time of going to press. PRICES: prices are correct at the time of going to press; However Frost reserves the right to alter them without prior notices. T&C: To allow Frost to supply our customers with the best possible service, from time to time, we will make our postal mailing list (names and postal addresses only) available to carefully screened companies whose products we believe will be of interest to you. If you prefer that we do not share any information with these companies, please contact us at [email protected]. Full T&C are available online. ALL PRICES INCLUDE VAT AT 20% professionally selected products ADDITIVES 97 AIR TOOLS 88 BODYWORK 70 Panelwork 70 ● Shrinkers 71 Metalwork 72 ● Metal Forming 75 Hammers and Dollies 77 ● Cutting 78 Miscellaneous 80 BRAKES 67 CAR CARE 13 Clean,Polish 13 ● Renovo 14 One Grand 17 ● Covers 16 CLEANING 43 Brushes and Chemicals 43 ● Blasting 44 COATINGS 05 CONSUMABLES 86 DVD’s 42 ELECTRICS 20 Battery 20 ● Ignition 22 ● Light 23 Y985 Blast Cabinet £300.00 Wiring 24 ● Miscellaneous 25 ● Instrument 26 Get Ready for Blast Off! ELECTROPLATING 18 Here is the answer to clean rust, old paint, corrosion and grime off parts EXTERIOR TRIM 49 quickly and easily. Includes: fluorescent light with exterior power switch Side FIBRE GLASS 66 load door allows loading large items, Glass viewing window, Thick rubber gloves mounted to the cabinet for easily handling parts. The cabinet and gun FILLERS 90 are capable of using most media including aluminium oxide, crushed glass, FUEL AND OILS 94 and glass beads. Comes flat packed taking 1-2 Hours Assembly Time. Working Pressure: 40-80 PSI @ 15cfm. Measures Size: 140cm (H) x 90cm (L) x 63cm (W) GASKETS AND SEALERS 92 GLASS 96 INTERIOR TRIM 46 MECHANICAL 27 Engine Maintenance 27 ● Engine Building 28 Bolts, Threads 30 ● Exhaust , Clutch 31 Drills, Spanners 32 ● Release 33 Radiator 34 ● Miscellaneous 35 MOTORCYCLE ESSENTIALS 64 PAINTING 50 Eastwood 50 ● POR15 52 ● VHT 57 Miscellaneous 58 POLISHING 61 J310 Automotive Electronic Stethoscope £19.95 RUST 06 Hear What’s Happening in Your Engine! SUSPENSION 84 Accurately pinpoint trouble spots anywhere where there is movement of TANKS 98 mechanical parts: noisy valves and followers, worn or broken gears, clogged WELDING 10 fuel injectors, bad bearings, air leaks and more. The electronic stethoscope amplifies and adds clarity to all types of noises, so the fault can be found, WHEELS AND TYRES 82 diagnosed and quickly fixed. It comes complete with headphones and volume 38 control. This simple and easy to use tool is powered by a 9V battery. WORKSHOP ORDER FORM 99 Order Line: 01706 658 619 Order Online: www.frost.co.uk PROMOTION 87/99 Lines Open: 8.30am-5pm Monday to Friday SHOP BY BRAND By Fax: 01706 860 338 By Email: [email protected] Dinitrol 09, 66, 90 ● Eastwood 7, 45, 52/56, 59 By Post: Frost Auto Restoration Techniques Limited, Crawford Street, Millers Oils 92, 94, 97 ● One Grand 17 Rochdale, Lancashire OL16 5NU POR-15 06, 50/51, 57, 90 ● Renovo 14, 49 04 NEW PRODUCTS Order online: www.frost.co.uk

F565 Four-Ton Hydraulic Body Repair Kit £82.50 Will Straighten, Bend or Spread Any Piece of Metal “Porta power” kits are great for body and frame repair. You can use our kit to straighten, bend, or spread any piece of metal that requires hydraulic power. The kit includes: a hand hydraulic pump, a ram that pushes, extension rods, also includes a rubber foot, two padded feet and a duckbill spreader. The unit comes with the snap couplings, threaded connectors, and 6' of hydraulic hose. Heavy walled extension tubes M640 On Vehicle, Brake stand up to the toughest situations and a long handle provides a low pumping effort. Pipe Flaring Tool The entire unit comes in a heavy duty metal carrying case. Set £99.50

Perfect for Marking and Splicing The tool is very small and hand held, perfect for making or splicing M285 Trackrite in replace-ment sections of brake with pipes in situ on the vehicle. Laser Beam Produces accurate SAE and DIN £89.95 flares on 3 /16" and 4.75mm pipes. The pipe is clamped into the end Saves Money of the by tighten-ing two clamping bolts, then screw in the former/die on Fuel and Tyre Wear to flare the pipe. The only space Trakrite Laser System provides a quick and easy diagnosis of front wheel alignment (tracking) you need is enough to hold the tool on vehicles. Correct tracking saves money on fuel and particularly tyre wear. The system is and then to tighten the former. designed to work with a low ground clearance (100mm is all that is required) and picks up on Suitable for most pipe types, the wheel rims, suitable for modern alloy wheels of up to 22 inch diameter and it can be set copper, copper nickel, steel, brass, up in a few minutes. It is extremely accurate as it uses a low radiation laser beam to indicate aluminum. Supplied in carry-case. toe-in or toe-out. The process self-calibrates after each use. Comprehensive and easy to understand instructions are supplied. Batteries not included.

M855 Expert Four Piece Dr. Hi-Torq Metric Impact Socket Set £9.99 (1/2" Square)

Expert Quality, six point sockets forged E138 Circuit Breaker Blade from chrome vanadium steel hardened, tempered and chemically blacked for corrosion Fuses £6.70 protection. Hole for accessory spring loaded ball. For use with air, electric or manual (State amperage required 5, 10, impact wrenches. Contents: 17, 19, 21 and 27mm sockets. 15, 20 or 30 amp)

The Breaker Fuse These Circuit Breaker Blade Fuses replace standard blade type fuse with a circuit breaker mechanism, which provides E650 Spark Test £6.00 the same protection as a standard fuse yet contains a reset function, which removes the requirement for a spare fuse. The Complete Power Tester The breaker fuses ensure a quick fix to The non-contact spark tester will test for the presence of power on spark plugs, coils any electrical trip. and distributors. Simply place the grooved end over the spark plug wire with the engine running and the high intensity bulb will flash indicating spark. Pen type pocket clip More New Products for handy use. within catalogue look for this symbol Order line: 01706 658 619 COATINGS 05

10198 HotCoat Powder Coating Gun £124.95 PC10 Frost Powder Colours £16.34 (1kg bag)

P240 Metal Blacking Kit £39.83 P241 Extra Blacking Solution For Extreme Durability, Choose Powder Coating £15.32 Powder coating allows you to coat and cure metal parts in less than an hour, and provides an extremely durable finish that is dent and chip resistant. It’s far superior to liquid coatings, it’s easy to apply with no drips or overspray, and contains no Chemical Blacking environmentally harmful solvents. Produce an amazing satin black finish in 3 Steps: minutes! Just dip your iron or steel parts 1. Strip and Clean your metal part before coating in the three solutions at room temperature. 2. Coat the entire part – you can’t overcoat • No heating or quenching is necessary 3. Cure your part in an electrical over • The corrosion resistant finish protects for about 20 minutes your piece • Including Mild Alkaline Cleaner (1litre), Features: Blacking Solution (1litre) and • Professional results Dewatering Oil (1litre). • Easy set-up, easy to use, and easy to clean-up • Quick colour changes • Durable finish • Excellent fluidization of powders • Economical Get professional results with this innovative powder coating system at home. It is much more durable than coating with paint and does not flake when hit or bent. Depressing the activation switch energizes the Powdercoat gun, charging the powder. Move the gun in slightly different angles to ensure that all areas of the part are covered. The coated surface will have a dull opaque coating. Make sure all areas of the part are coated evenly. Place in the oven and bake for 15 minutes. Easy set-up, easy to use, and easy to clean. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor), mains electric supply and a dedicated electric oven. This kit includes corona application gun, power unit, 240v to 110v transformer and click on: instruction book. www.frost.co.uk for more products and State Colour: web exclusive offers JET BLACK BLUE ORANGE BROWN WHITE YELLOW GREEN BRIGHT RED SILVER GRAPHITE 06 RUST Order online: www.frost.co.uk

4 Easy Steps to Stop Rust Permanently with STEP 1 STEP 2 STEP 3 Degrease and Clean Surfaces Neutralize Rust and Etch Metal Apply POR 15

Before After

Marine Clean Prep & Ready POR15 Rust S203 £19.95 (3.78 litres, US Gallon) S206 £28.95 (3.78 litres, US Gallon) Preventative Paint S204 £10.25 (946ml, US Quart) S205 £17.00 (946ml, US Quart) P230 £21.50 (473ml, US Pint) P235 £33.50 (946ml, US Quart) Marine Clean cleans and degreases Prep & Ready provides the best adhesion in one application without leaving any for POR-15 on any surface, including State colour: BLACK CLEAR GREY SILVER residues, noxious fumes or flammable aluminium and shiny polished metal solvents. Dilute with hot water to surfaces. Dissolves away the rust in P238 POR15 Solvent £12.95 remove oil, petrol deposits in old minutes, etch primes the clean surface (946ml, US Quart) tanks and grease deposits. and leaves a Zinc Phosphate coating to Great for cleaning the engine, prevent further rusting. Non-toxic, non- No other paint is as permanent as removes mildew and staining from flammable and non-corrosive. Insures POR15. When others have chipped, all surfaces. Remove rust stains from perfect paint adhesion. Gives better scratched, flaked, and peeled, porcelain sinks, toilets and tubs. welding conductivity. Can be brushed on, POR15 will still be preventing rust. Also suitable to clean canvas, vinyl, sprayed on with the free trigger head Quart covers 9 square metres. nylon, holding tanks, grease taps, provided or just immerse rusted parts Can be sprayed or brushed (Use P238 auto parts and more. to bring them up like new. Solvent to thin and clean brushes). Prevents rust from recurring by protecting metal from further exposure STEP 4 to moisture. Designed for application Topcoat the Surfaces directly on rusted or seasoned metal surfaces. Dries to an incredible rock- Topcoat the metal surface with hard, nonporous finish that won’t chip, the POR-15 coatings: Chassis crack, or peel. Totally resistant to most Coat Black, Glisten PC, Hardnose, acid, petrol and road salt. UV light Metal Mask, Stirling Silver etc. sensitive (must be topcoated for prolonged exposure to sunlight). More details in the painting NOTE: Follow instructions on label carefully. section see page 50 Applications: Suspension, Chassis, Doors, Trunk Areas, Engine and Fuel Tanks, Rusty Frames, Floor Pans, Farm Equipment, More POR-15 products Marine Equipment, or even a heavily on pages 50 and 51 corroded battery tray. Excellent for sealing and repairing fibreglass.

P237 POR-Starter Kit £15.95

State colour: BLACK GREY SILVER

A Kit to Try POR-15 Rust Solutions Includes one can of POR-15 Rust Preventative Paint (118ml), 236ml of Prep & Ready, 236ml of Marine Clean, two wooden handle paint brushes and a pair of our special high-dexterity surgical latex gloves.

More POR-15 Kits in the Painting Section on page 50 Order line: 01706 658 619 RUST 07

Before

N150 Rust Buster £3.57 (118ml) After

Loosens Rusted Connections Goes to work instantly, every time. Eastwood Rust Dissolver Quickly loosens rusted bolts, screws, 16037 £19.40 (946ml, US Quart) shafts, piping and any types of 16038 £34.21 (3.78 litres, US Gallon) “frozen” connection. It contains no acid, alkali or other harmful Remove Rust Fast Without Metal-Eating Acid ingredients. Safe for skin, clothes, metals, and friction-type surfaces. A safer, acid free rust remover. Works as long as the surface is wet. De-rust small parts Flexible telescopic spout extends by submerging them in a plastic container filled with Rust Dissolver. Items that cannot be 7” to reach difficult areas. fully immersed due to size can be placed in the discharge stream of a commonly available small pump. Common irrigation hose can be used to assure full coverage. One quart de-rusts about five square feet. One gallon de-rusts about 20 square feet. • Leaves metal ready to paint, plate or powder coat • So gentle, it’s suitable for engine parts • Parts can remain in contact with Eastwood Rust Dissolver without damage • Harmless to copper, brass, aluminium, solder lead, plastic, rubber, seals, wood or vinyl • Does not remove paint and chrome that adhere to the surface • Removes bluing and other oxide coatings.

More Eastwood products on page 52 or online. Use keyword (Eastwood) s Eastwood Rust Encapsulator 16015 Aerosol £19.91 (448g) 16011 £30.64 (946ml, US Quart) only available in Black

Zinga Cold Zinc Coating State (500ml) S505 Aerosol £22.98 colour: BLACK RED SILVER S510 Tin £25.53 (1kg) S515 Zinga Solve £7.66 (1 Litre) Can Be Used Over Rust Active and Passive Stabilises rust and prevents further Seals and rusting. Can be used were rust encapsulates Protection Against all in one coat Corrosion cannot be removed. Can be top coated with virtually all paint systems. Zinga is not paint. It is a pure zinc coating • Encapsulates rust and primes in (with no pigments or extenders etc) and one step it will physically galvanise a car body or • Minimal prep: remove loose rust, degrease, and apply chassis and provide a great many years • Compatible: with most top coats. of protection against rust in any form. • Convenient: use it over or under body fillers and under lacquer, enamel, All conventional 2K automotive paints and urethane; perfect for filling pinholes and other surfaces irregularities as well as basecoat or clear automotive • Proven: tested to be more effective than other brands in UV resistance, paints can over coat Zinga. It can be it excels at preventing rust creep, and has outstanding overall durability primed with all standard 2K primers. • Preventative: stabilises rust and protects against further rusting Caution: When using cellulose or • Versatile: spray from the high-solids aerosol, or brush directly from the can solvent-borne acrylic automotive primers, • Safe: acid, lead, and chromate-free. Contains no isocyanates. the Zinga must first be sprayed with a Heat resistant up to 204°C. water-based barrier coat. 08 RUST Order online: www.frost.co.uk

Granville Rust Converter S400 £9.97 (250ml) S405 £19.25 (1 Litres) S410 £79.70 (5 Litres)

Stop Corrosion in Severe Environments Used by the oil and marine industries, the MoD and NATO to stop corrosion in environments far more severe than your car will ever see. Drying to a tough gloss black finish it can then be top coated with most paints. Environmentally and ecologically safe. Acid and lead free. Non-flammable. MUST be applied to N140 Rust Reverser £60.26 rusted ferrous metals. Kills old rust and stops new forming. With Electrolytic Rust Removal, Convert Remove Only Rust from Your Vehicle Parts! Corrosion to Metal Restore products can be used by a diverse range of users, from restorers of all type of Dissolving the rust with powerful solutions, vehicles, boat builders, model engineers etc. Water-based, nonacidic, non-toxic, biode- removes surface features preserved in the gradable derusting concentrates, they only remove the rust and do not attack plastics, rust. Rust Reverser is designed to salvage rubbers and non-ferrous metals. No danger of flash rusting occurring when parts are some of the rusted metal rather than just removed from the bath (a powerful corrosion inhibitor is included in the formulation). dissolving it. The pulsed electrolytic Extremely economical, making up 10 litres of degreasing fluid/rust remover. method uses a small electric current in an alkaline solution to convert some of the corrosion back into sound metal, bringing rust to bright metal overnight. No limit to the size of job, providing you have a large enough tank. The solution can be used many times. No heating or agitation required. The power supply is low voltage, low current. The Kit comprises alkaline Before After powder for 10 litres, power supply, anodes and instructions. 1| Clean Parts C605 Restore Pre-Clean Concentrate £20.43 (500ml) S290 Plastic Plugs £8.68 Use it to prepare parts for derusting. It removes oil grease and grime from (120 assortment) all metal surfaces. If a stainless steel container is used, the solution may be heated and the cleaning action accelerated. Get Plugged! Note: It should not be used to clean aluminium alloys After drilling into cavities and box sections, spraying the protective Before After film, it is essential to plug the holes. These assorted bungs of 8, 10 and 12mm give a professional finish 2| Remove Rust and prevent the ingress of dirt and moisture. C610 Restore Rust Remover £25.02 (500ml)

The part(s) are degreased, and any loose rust removed before suspending in a bath. For lightly rusted surfaces, inspect after 1 hour. Remove, wash under running water and scrub surfaces with a nylon brush to remove the dissolved rust. Parts remain rust free without further protection for a considerable period, allowing time for painting, chemically blackening, or plating. The derusting solution may be used again until the solution becomes blackened and reaction time excessively slow S340 Extension Hose £4.60 (60cm)

V157 Metal Protection Fluid £6.13 (500ml) Fits Directly onto the Very important and often overlooked. Acid rain and acid contaminated Dinitrol Aerosol Nozzle dust is everywhere. MPS Fluid will protect all metals even in salt and acid Has a 60cm tube with a brass fan atmospheres. Corrosion often starts in the nooks and crannies, seams – spray jet that ensures coverage in spotwelds – panel joints – alongside fasteners etc. Spray MPS Fluid a circular motion within enclosed in to these areas for extra protection. Cleaner and water displacer spaces, so the whole vehicle can • Protect all major metals, alloys and wire wheels (chrome or painted) be done with the minimum effort • Low in toxicity (no nitrates – chlorinated substances or heavy metals). and expense. Order line: 01706 658 619 RUST 09

S345 Converust RC900 £17.00 (400ml) Solve Rust Problems with Dinitrol Rust Solutions? Impenetrable Barrier Forms an impenetrable barrier to oxygen and moisture. Ideal for cavities, panels and underbody work. Loose and flaking material should be removed but it is not necessary to clean down to bare metal. Maintain Your This aerosol version of Bodyshell RC800 (S300) converts rust to a stable organic iron compound. Dries to a hard black film ready for fillers or topcoats. S305 Corromax 3125 £13.79 S335 Metallic Under-Body (1 litre) Wax £10.21 (500ml)

S447 Corroheat 4010 A specially formulated wax The metallic underbody wax £16.70 (500ml) which penetrates rust and is a hard brown waxy film dirt preventing further corrosion. and the finest protection you Clear Wax Treatment, a heat Use on open surfaces or cavities. can give your vehicle. With resistant, corrosion prevention Even damp and dirty surfaces will not these easy spray 500ml cans giving a hard, transparent, affect its superb performance. the job is complete in no time. protective, dry film. Can be used as protection on painted surfaces. S330 ML Cavity Wax S315 Dinitrol 4941 • Good adhesion to rubber £10.95 (500ml) £13.62 (1 litre) and plastic parts • Resistant to alkalis and acids ML cavity wax offers DINITROL 4941 is a black underbody • Very short drying time. excellent protection and is coating which resists corrosion and supplied with an extended abrasion. Apply over Dinitrol Corromax S300 Converust RC800 nozzle – perfect for spraying 3125 for the ultimate in rust prevention. inside doors, sills etc. To apply this product use Wax / Shutz £30.70 (1 Litre) Gun. Kills and chemically converts rust into a passive organic compound bonded to the S310 Dinitrol 3654 £14.34 metal surface. Use in heavily (1 litre) rusted areas. More Dinitrol products online. Use keyword (Dinitrol) A rust prevention fluid for use on new or clean surfaces. Use in cavities, box sections or on open surfaces. Outstanding protection.

S295 Wax /Shutz Gun £17.50 A324 1/4 BSP Female Bayonet £2.04 S520 Rust Proof Kit £101.62 (Kit illustrated above) Kills and chemically converts rust into FREE PLASTIC PLUGS and Extension Hose with our Rust Proofing Kit a passive organic compound bonded to the metal surface. Use in heavily Kit contains RC900 (S345) to convert rust, 2 litres of 3125 fluid (S305) to cover flat surfaces, rusted areas. 3 litres of 4941 black underbody seal (S315) to cover the 3125 and 2 cans of ML Wax (S330) for cavities and inside the doors. See Air Tools Section for fittings. 10 WELDING Accessories Order online: www.frost.co.uk

K350 Intergrips £13.97 (Pack of 5)

Hold All Your Parts Together W260 Welding Cart £52.50 A real boon to restorers. They hold any shape panel in place anywhere – edge to edge and perfectly prior to butt welding, leaving only a small gap allowing full penetration of Perfect Addition to the weld. Once the two sections are tack welded together, the wing nut is slackened, the toggle bar removed and the clamp lifted from the job prior to final welding. Any MIG Welder or The end result is a first class welded butt joint with very little dressing being necessary. Plasma Cutter • Ideal when welding patch repairs in floors, wings, door skins etc. or when assembling The welding carts steel construction with fabricated panels on reskinning projects. a durable finish is good for years of use. • Clamp flat, curved or even pressed ribbed panels. The easy pull handle is out of the way of gun leads and along with the large back wheels and front castors makes the welding cart very easy to move around. W240 Welding Arrows £9.19 Two safety chains secure shielding gas cylinders when used with a MIG welder. Hold Steel in Place Additional storage tray for accessories s Hold steel in place with these 50lb welding magnets. and equipment is provided and there are You get three magnets with 45, 90 and 135 degree lead hooks on both sides for cable angles as seen being used in the TV show management. Tray of 445 x 285mm fits “AMERICAN CHOPPER” on The Discovery Channel. most manufacturers MIG welders and Set of 3. plasma cutters.

K400 Magnetic Clamp £13.79 W144 Auto Welders Helmet £56.17 Strong 6-Sided Magnet s This strong six-sided magnet features five fixed Gives total angles to clamp steel sheet, tube, plate etc. firmly protection and and accurately. One is all that is required for smaller maximum visibility jobs; two or three clamps will securely hold even when welding. long runs in place for tack welding. Variable darkness from shade 9-13. Solar powered to K460 Welding Clamp £8.68 eliminate the need for batteries. The favourite clamp in fabrication shops due to its wide Large 98 x 45mm viewing area. All built U shaped jaws, which will firmly grip different shaped into a comfortable lightweight adjustable sections, whilst still allowing clear visibility for helmet. 12 month warranty. alignment or welding.

Protect Your Eyes

W180 Green Gas Welding Shield £22.50 W181 Replacement Visor £18.00 W115 Flip-Up Goggles with W120 Headshield c/w W182 Clear Visor £11.50 Green Lens £9.19 Lens £12.77 Order line: 01706 658 619 Machines WELDING 11

Professional Welding with

BY12746 Eastwood TIG 200 £599.00

AC/DC Welder for Steel and Aluminium This 200-amp TIG Welder features an AC/DC switch that gives professional Y12012 Eastwood 175 MIG quality welding on aluminium, stainless or £349.00 steel (sheet, tube or bar stock), and precise welding of thinner-gauge materials up to 6mm thick. With a 4.26m torch and a 3m earth cable, you’ll be able to get into any space. It has pre-and post-flow adjustment knobs to protect your weld and torch and has infinitely adjustable foot pedal to control amperage so you can get going quickly. Thumb control overrides the foot pedal for out-of-position welding, or when bench welding is not an option. Powered by 240v, 13 amp supply. • Square-wave inverter for accurate aluminum welding • High-frequency start for precise arc control • Duty cycle: 45% at 150 amp Weld Aluminium, as Well • “WP-17”-type torch accepts common cups as Steel, with this MIG and collets, up to 2.6mm electrodes. Eastwood MIG 175 welder is designed for use by the professional welder or BY12740 Eastwood Plasma Cutter weekend enthusiast. The welder comes £349.00 WAS £449.00 complete (except for the gas cylinder) and is ready to weld 0.8mm to 4mm mild Please see page 87 for Special Offer steel and stainless, plus aluminium, using Versa-Cut Cutter the Free Spool Gun. This welder has infinitely adjustable wire speed and heat This Eastwood-designed plasma cutter is settings. (30-175-amp welding range and your best choice for making clean, fast feeds wire at 58"-471" per minute). cuts through steel, stainless or aluminium The drive roll mechanism which is the as thin as 24-gauge, or as thick as 8mm. heart of any MIG welder is designed to Compared to mechanical cutting, it works Eastwood specifications and delivers significantly faster, and makes curved and flawless wire feed without skipping or intricate cuts more easily and precisely. slipping on the wire. Included is a Inverter technology offers superior arc stability regulator with hose, the spool gun (for and cutting power. Powered by 240v, 13 amp welding 1mm to 6mm aluminium plate), supply. Fitted with 6m torch cable and 3m earth wire, tips and accessories...just add cable with clamp. Rated 40-amp output. your own cylinder of CO2/Argon. Needs air 3.0cfm at 20-65psi. • Powered by 240v, 13 amp supply 3 year warranty • 3 year manufacturer's warranty (subject to conditions). Weight 15kg.

22994 Four inch Magnetic Copper Welding Backer £19.50

Four-long Magnetic Copper Backer helps you weld without burning holes. It provides

s a hands-free support when doing butt-welding or welding holes in sheet or whenever an open area needs to be bridged with a weld. Prevents warping and weld burn-thru. Because it is magnetic, no hands or clamps are needed and your welding material won't stick to the copper. 1/8-thick solid copper, with high-strength, high-heat magnets.

W135 Low Amp Welder s Welds 0.9mm Thin Steel £99.99 Conventional arc welders blow holes in thin sheet steel simply because they do not operate at a low enough amperage. The Model Welding Rods 1600 is specifi cally designed to work at the lower range of 40 to (Pack of 20) 140 amps and so can weld steel as thin as 20 gauge (0.9mm). W175 1.6mm £4.99 On maximum amperage though, it can handle up to 5mm (3/16”) W176 2.0mm £5.50 steel, and so covers the range of most automotive applications. W177 2.5mm £5.95 Comes complete with face shield, chipping hammer and wire brush. your faceshield. instructions. Needs50-70ampsfromyourarcwelderandaNo.9toNo.12shadein 1.6mm/16g arcweldingrodsandwillweldupto3/16”steel.Comescompletewith amperage enoughtogiveyoufullcontroloftheweldingoperation.Itusesordinary metal asthina22g.Apulsatingactionalongwithcurrentreductiondiodelowersthe With thisattachmentforyourarcwelderyoucanrunsmoothevenweldsjoiningsheet W125 W175 W170 applying heattoareasofthingaugemetal.Works likemagic. making itunnecessarytodismantlebeforewelding.Italsopreventswarpagewhen secondly, itprotectssurroundingglass,rubber, vinylandplasticfromheatdamage, working area,savingwarmuptime,and Firstly, itconcentratestheheatinyour soldering etc,savingyoutimeintwoways. through metalwhilewelding,brazing, non-toxic puttythatstopsheattravelling Cold frontisaharmless,odourless, Welding Through MetalWhile Stop HeatTravelling W100 12 Instruction leaflet.DemonstrationDVD.Tinning brush. aluminium heads,bellhousingsandsumps. Kitcontains: the firstgenerationrodsitdoesnotrequire steelorspecialcleaningbrushes.Idealfor metal’s surface,whichmaybeimpossibletopenetrate withpreviousrods.Alsounlike join andissimplertouse.Italsoeasilypenetratespastimpuritiesthatlaybelowthe and allwhiteorporousmetalsishere.Thissecond-generationrodgivesastronger cast aluminium,potmetal,copper, magnesium, The latesttechnologyinjoiningaluminium, W107 section W105 Sealers and Gasket the See SEALER? JOINT A NEED solder. Aswithbrazing,notsuitableforbuttjoints.Packcontains8-250mmrodsandflux. mounts toacopperfueltankorotherdissimilarmetalswithhighstrengthsilver Join brasshingestoasteelbonnetor W145 Join SteeltoCopper Join BrasstoSteel, £4.60 Leather Welding Gauntlets £4.60 1.6mm Welding Rods(20) £39.32 Body Welding Attachment £32.68 £26.98 HTS-2000 AlloyRepairKit Silver Solder£27.00 Cold Front£20.40 WELDING (Extra 10Rods) s iron manifold or repairingcracks inblocks, suitable forhigh-stress areas, including repair ofboltlugs. is stillfully machineable.Theperfect rodtousefor high-heat applications upto1400degrees, suchasacast metals. Welders rateitswetnesson ferrousandnon-ferrous metalsasexcellent andwhileitisvery hard,it and repairsonallcast iron,steel,copper, bronze,nickel,and brass. Italsowilleffectivelyjoindissimilar The strongestbrazing rodmadeforjoiningcastironandsteel, HTS-528isthinflowingforclose-fitjoining W528 (414ml)

HTS RodsforCastIron£32.68 Accessories

s s s 5 HTS-2000brazingrods. (10 Rods) re online: Order for welding.Lowcostinsuranceagainst and ensuresgoodelectricalconductivity Its highzinccontentpreventscorrosion primer toassemblyandspotwelding. panel edgeswithouraerosol start though,bycoatingthe You canensurethatitdoesn’t and reassemblingpanels. cult tostopitwithoutremoving spot weldedseams,itisdiffi Once corrosionstartsbetween Welded Seams Between Spot Prevent Corrosion P130 Work onalmostanytypeorgradeof • Can beusedanywheretomakeastrong • engine blocksandcylinderheads,etc. housings rockercovers,crackedaluminium such asbrokencarbflanges,thermostat of applicationsforthecarrestorertoo, magazine workshops,Lumiweldhas100’s Tried andtestedwidelyinmotorcycle Welding Aluminium! W151 W150 future rust. in ajointstrongerthantheparentmetal. Mazak, potmetalanddiecast,resulting (Land Roverbodywork),zincalloys, aluminium includingDural,Birmabrite a butaneblowlampasheatsource fused joint(similartobrazing),usingonly Lumiweld Kit 10 Rods 5 Rods £6.13 Primer Aerosol Weld-Thru ZincRich (500ml) £14.81 www.frost.co.uk £19.91 Order line: 01706 658 619 Clean and Polish CAR CARE 13

V210 California Car Duster £20.95

The Daddy of all Dusters American car dealers use this huge V115 Nenette £10.95 wooden handled 38cm (15”) duster for V116 Extra Nenetol Fluid £4.75 cleaning their stock. It has a special baked on wax treatment which lifts dust without scratching. Keeps your car looking ‘just Interior and Exterior Use washed’. The dirtier the brush gets the You have washed and polished your classic car ready for the show at the better it works. It lasts for years and never weekend, but by the time it is in position it’s covered with dust and finger marks needs re-treatment. again. Now is the perfect time to bring out Nenette. Nenette’s soft mop is impregnated with a liquid called Nenetol, which enables it to absorb surface dirt and dust and leave a highly polished surface. After several uses the mop can easily be cleaned and re-impregnated.

V211 Mini Car Duster £8.70

Glove Box Duster KEEP IT IN THE GLOVE BOX. Perfect for wiping over the interior surfaces of your N260 Flexi Wiper Blade £10.50 car, the paraffin impregnated mop head will remove any dust particles and dirt. V205 Rapid Wringer Mark 2 Just shake it out and your car is spotless. £121.53 Dries Your Car in HALF the Time! Innovative Foot Powered Dry your car in half the time. Whisk away V330 Trim Sheen Chamois Leather Wringer water to leave a streak free surface. £6.13 (500ml) The soft, flexible silicone blade with a The hardest part of washing a car is the T-Bar edge moulds to the contours of drying of it. The repeated performance Gleaming Trim your vehicle as it gently wipes away ofwringing out the excess water from water without scratching. 100’s of uses High quality silicone spray, the chamois leather and then unravelling around the home, wipe shower walls, which leaves trim surfaces it time and time again ready for use worktops marble and glass. gleaming. Trim Sheen is a fast becomes a chore. No more wrist or hand economical way to reproduce strain and water squirting all over your an attractive and durable clothes! The Rapid Wringer makes the finish to dashboard, trims drying of cars a pleasure and saves time and all vinyl surfaces. from the old fashioned manual way.

V380 Rubber Care U410 Fabric Upholstery £4.60 (400ml) Cleaner £5.11 (500ml) V123 Microfibre Cloths £7.90 Look after rubber parts and (Set of 4) prevent them from ageing Dry stable foam cleaner suitable and cracking. This silicone for most types of cloth, velour The non-abrasive, wedge shaped micro free Rubber Care eliminates and upholstery. Safe to use on fibres lift and trap polish and wax better squealing noises from dry most fabrics, perfect for than cotton and are lint free. The loop pile rubber and maintains door removing beverage stains. is also tough enough for wheels, bumpers, and boot seals. It can be headlamps and chrome. It also soaks up used on tyres, rubber mats, water like a chamois. Machine wash and More Frost Aerosols online running boards and trim Use keyword: (Frost aerosol) dry after use – don’t bleach or iron. strips. Four 40cm x 40cm cloths to a pack. 14 CAR CARE Clean and Polish Order online: www.frost.co.uk For a Clear Visibility Waterproofs Canvas, Duck, Mohair as well as Boat Covers and Caravan Awnings V245 Rain Repellent £7.45 (200ml)

Rain-X leaves the exterior of your windshield clear of rainwater without affecting your wipers. Easy to apply, it Breathe New Life Into Your Soft Top with Renovo forms a second line of defence against wet weather driving U219 Plastic Window Renovo Colour Reviver conditions. A positive aid to road safety. If you ride a motorbike, why not Polish £12.26 (50ml) U214 £20.43 (500ml) try it on your visor? U215 £34.90 (1 Litre) Restore Transparency and Remove Cloudiness Re-Colours and V385 Anti Fog Get rid of scratches and staining for Reconditions like New £7.45 (200ml) good. Simply polish it on and polish it off. Four colours to match your convertible It cleans and conditionsin mins. Suitable soft-top! Easily applied in minutes with a Stop windows from for all plastic windows, perspex screens, brush or sponge. Allow two hours to dry, misting up! Rain-X Anti lights etc. leaving full lustre of the original finish. Fog prevents fogging, misting and steaming State Colour: on interior glass and U211 Vinyl Soft Top Cleaner mirrors. Long lasting £11.50 (500ml) BLACK BROWN DARK BLUE DARK RED and easy to use, it helps maintain clear visibility whilst driving. Cleans and protects your vinyl top, U213 Soft-top Canvas Cleaner removes road grime, salt, leaf gum and £14.30 (500ml) V235 Dr OK Wack bird droppings helping prevent harmful penetration. Follow with U212 Vinyl Screenwash Soft-top canvas £9.19 (250ml) Ultra Proofer for the perfect finish. cleaner removes road grime, salt, leaf gum Designed to eliminate dazzle and bird dirt from and obscuring films such as U212 Vinyl Ultra Proofer canvas and duck oil and diesel. Supplied as £11.50 (500ml) hoods and tonneaus. standard in many of the Brush on and sponge world’s leading car marques. Designed to protect and condition the dirt off to prevent Once you’ve tried this you against stains and oxidisation, even the penetration that will never go back resist weathering. Contains UV inhibitor can damage the to your old brand. to help prevent colour fade for the roof. soft-top material.

V370 Glass Cleaner Also Available: Renovo Ultra Proofer See Exterior Trim section for more details. £4.60 (500ml) s V133 Gliptone Leather Smelling Air Freshener £2.55 Removes traffic film, dust, finger- prints, nicotine haze, grease and dead flies from windscreens, Smell the Difference mirrors. Pretty good in the house The distinct smell of traditional English leather is rarely found today, for tiles and windows. because in the modern tanning process, that distinctive smell is lost. This very long lasting Air Freshener has captured that smell and will transform the interior of a car, room or office.

Liquid Leather Products s U205 Cleaner £6.64 (250ml) U210 Conditioner £7.66 (250ml)

Fully restore the softness and sheen of beautiful leather in minutes. U205 cleaner removes years of dirt and grime to reveal the original beauty and grain of your upholstery andtrim without the use of harmful chemicals or water. Follow with U210 conditioner to replace the delicious aroma of new leather. Also suitable on leather clothing and furniture. Order line: 01706 658 619 Clean and Polish CAR CARE 15

V159 Autosol Polish £5.30 (100g)

Brilliant chrome, aluminium and metal V250 Mini-Vac Kit £12.97 polish removes corrosion, tarnish and discolouration. Reduces blueing on exhausts. Rub with soft cloth and buff off Clean the Unreachable to a high lustre. Now you can clean out the most awkward places in the car using only your vacuum cleaner. Simply fit it to your existing vacuum cleaner and the nozzle can be reduced in size right down to 3mm. The kit includes an adapter, a 750mm x 15mm diameter extension tube, two brush heads and a crevice tool. It’s perfect for reaching the places no ordinary cleaner can.

V355 POR Glo Rejuvenator £9.54

Rejuvenate Vinyl Make rubber and vinyl shine for up to one year with this clear, brilliant Before coating! Ideal for vinyl soft tops, After bumpers, bike seats, tyres and rubber trim. Not suitable for interior use.

V200 Untrimmed Chamois Leather £13.28 More products in the Painting Section

You just can’t beat a real leather for drying your car to a streak free shine. Our really big, best quality, selected whole skin will give years of service. Make sure you have the cleanest, shiniest car around.

V390 Brass Lacquer £11.23 (400ml)

Protects Brass Peek and Copper Pipes V101 Tube £4.60 (100g) V112 POR Polish £11.10 (118ml) V106 Tin £6.64 (250ml) Protect your brass, copper For a Fabulous Shine pipes and fittings from Multi-Purpose Metal tarnishing for years. This long Specially formulated for professionals and lasting, rapid drying, film is Cleaner others that want a fast-acting yet gentle suitable for interior or This fine polish is non-abrasive and not polish. Quickly put a fabulous shine on external use on any non- only cleans, but polishes and protects a chrome, aluminium, brass, steel, stainless, ferrous metal. Used by the MOD for multitude of surfaces. Perfect for silver or any other bright metal surface. shell cases. Film can be removed with aluminium and chrome, copper and brass, Try it on your vehicle, brass lamps, cellulose thinners. Useable up to 100°C. nickel and stainless steel. Recommended silverware, aluminium or for fibreglass, glass, perspex and chrome wheels, and ceramics. Available as a paste: hundreds of other uses. More Frost Aerosols online great value. You’ll love the results! keyword: (Frost aerosol) 16 CAR CARE Covers Order online: www.frost.co.uk

N505 Magnetic Wing Cover N100 Soft Wing Cover £19.97 N510 Seat Cover £14.00 £11.74 For High Shine Finishes Protect Your Seats Don’t Risk a Scratch This super soft three foot long cover Strong slipover seat cover saves seats Protect your vehicles bodywork during provides paintwork protection. Holds in getting marked or dirty, when working on maintenance work. Made from tough place with two tie straps. the car or test driving wearing overalls. durable padded PVC. Sleeved magnets hold the cover firmly in position. Wipe clean surface on both sides. N560 Fold-up Bucket £10.72 Width 900mm x Height 580mm. Hideaway Bucket click on: Takes up no space or weight but can carry water to fill the www.frost.co.uk radiator; wash the car; act as a tool bag or, if really desperate, a for more products and container for draining engine oil! 200mm diameter x 250mm high. web exclusive offers Indispensable when off to a rally or meeting.

With carbon filters

Maintains your battery

Carcoon Car Bubble Car Cover V153 (400 x 160cm) £390.13 - Lotus 7, Spitfire, MG Midget etc. V160S 13’ 5” long car £141.45 V154 (470 x 180cm) £428.00 - 911, E Type, DB Aston Martin, TR6 etc. V160M 14’ 2” long car £143.49 V155 (505 x 200cm) £467.74 - 911 Turbo, V8 Aston Martin, Ferrari, XJ6 etc. V160L1 15’ 3” long car £147.06 V156 (560 x 200cm) £506.53 - Rolls Royce, Bentley, S Class Mercedes etc. V160L2 16’ 4” long car £150.13 Protected Environment with its Own Airflow V160XL1 17’ 6” long car £155.74 Revolutionary advances in car storage with patented Airflow Technology. Breathable, Reflective The reinforced plastic bubble provides a controlled environment in which to safely Covers store your classic car or motorcycle. It uses activated carbon filters to remove contaminates and moisture which cause damage to your cherished vehicle. At shows, rallies or on holiday our cars are The filters control the air circulation for safe storage leaving your car, bike or left out to the rain, dust, bird droppings, restoration project dry and dustfree. Ideal for long or short term storage. tree sap, snow, sun and prying fingers. Plus the award winning “Intelligent Battery Management” not only maintains and Protect your classic with a breathable improves the life span of your vehicle’s battery, it will also run your Carcoon for days woven polyester cover with aluminised when mains supply fails. finish to reflect ultra violet. Covers incorporate a door zip, all round elastication, under straps and comes Details of out door and framed units on our website. For Carcoon Bike Bubbles, see Motorcycle Essentials Section complete with a holdall. Suits vehicles up to 5’ high. Ask for other sizes. Order line: 01706 658 619 One Grand CAR CARE 17

V310 Blitz Wax £19.91 (443g)

The ultimate in Carnauba paste wax gently V150 Jumbo Stockinette £5.62 (1kg) caresses your paintwork to produce long lasting protection and lustre. You have to Our jumbo roll is a full 12 metres of double thickness pure try it to believe it. cotton – perfect for cleaning, waxing and polishing.

The Greatest Range of Cleaners and 1 7 Conditioners 2 3 4 5 6 1 V303 Show-off £8.17 (473ml)

Get the wet look. After washing your car, finish with Show-off to give a just waxed appearance. Simply spray on and buff to a brilliant lustre with stockinette.

2 V315 Chrome Polish £8.68 (473ml)

Recognised as one of the finest chrome polishes for over 60 years. It removes rust and restores chrome to a liquid like shine. Perfect for wire wheels, motorbike parts and bicycle wheel rims. Great on the Bathroom taps 8 and fittings.

3 V320 Plastic Polish and 5 V305 Omega Glaze £12.26 7 V325 Do-it-all Protectant Conditioner £11.74 (473ml) £12.26 (473ml) (473ml) For the ultimate concours finish. It cleans, conditions and protects For internal and external use. For cleaning Removes swirl marks and fi ne scratches everything from rubber to vinyl seats. the dash it leaves a perfect satin matt without abrasion. Gives excellent results It does not chalk out on plastics or turn finish and when used on plastic bumpers it every time leaving a deep liquid shine even tyres brown. Allow it to penetrate for brings back the original colour in moments. on dark colours and black. Follow with 5 minutes then burnish to a beautiful Very effective for clearing plastic windows. Blitz Wax for best results. satin finish.

4 V308 Wash and Wax £6.13 6 V301 Metal 300 8 V312 Heavy Duty £8.17 (473ml) £12.26 (473ml) (473ml)

Wash without streak or smear. Designed to A spectacular liquid metal polish that Formulated to recover extremely oxidised be used in conjunction with all of the ONE cleans and protects Aluminium wheels, paint fi nishes. It is used on paint that is GRAND products, it does not strip off your diamond plate, Stainless Steel, Brass and solid colour or 1 stage metallic where the Blitz Wax and it does not streak or smear. Copper. It is easy to apply and contains no finish is completely fl at and dry to touch. It rinses easily leaving no water spots. harmful acids. Brings a deep lustre finish. 18 ELECTROPLATING Order online: www.frost.co.uk

Anodise P165 Tank Agitator £24.51 Prevent Poor Uneven Plating

Use the agitator air pump to prevent poor uneven plating due to bubbles lodging on the work surface during the plating process. Helps circulate the salts P900 Aluminium Anodising Kit improving the finish. Particularly £105.00 (5 litres) important on larger pieces. Use with all tank-plating kits. Anodise Uncoated Aluminium in Your Garage C250 Plate Stripping Kit £90.89 The surface of aluminium is susceptible to attack from salt, the acids in rain and oxidation from the atmosphere. Remove Old and The anodising film is a hard, corrosion Damaged Plating resistant aluminium oxide produced from This system provides the the part itself so cannot peel off, making amateur with an easy it ideal for restoring items on cars and method to remove old and motorcycles. Contains power supply, tank, damaged plating at low cost. anodising solution, cathode set, scouring Quick and safe to use, the kit includes powder and all ancillary equipment and everything to make up a 10 litre electrolytic instructions. stripping tank. Strip chrome, nickel, zinc NOTE: Not all cast aluminium parts can be anodised. and rust from iron, steel, copper, zinc and brass.

Coloured Anodising Electroplating Consumables C251 Stripping Salts £35.74 (10 litres, 2kg) P905 Coloured Anodising C252 Stripping Anodes £12.26 Dye Kit £66.00 (5 litres) P171 Brush Zinc Solution £7.15 (1 litre) P906 Anodising Dyes £22.47 P172 Brush Passivate £7.15 (1 litre) (1 litre, dilute for 5 litres) P173 Applicator Brush £10.21 After anodising you P181 Super Bright Anodes £12.26 can make your own P182 Super Bright Salts £27.50 (5 litres, 1kg) custom coloured P183 Super Bright CC57 Brightner £5.50 (250ml) finish by using dyes. Kit contains a tank P191 Zinc Anodes £12.26 and heater to P192 Zinc Salts £27.50 (5 litres, 1kg) maintain dye at 30 P193 Trivalent Passivate £6.00 (100ml) deg, tank agitator for even colour, 1 litre P197 Yellow Passivate Solution £36.77 (5 litres) dye, and all ancillaries. P213 Nickel Salts £28.00 (5 litres, 1kg) State colour P214 Scouring Powder £4.09 (100gm) L320 Electroplating P216 Nickel Anodes £12.26 Book £7.00 Black Blue Green Red Violet Yellow P356 Nickel Brightener £6.13 (for 5 litre mix) P361 Brush Nickel Solution £7.15 (1 litre) Learn the Proper P381 Matt Nickel Solution £30.64 (5 litres) Techniques for P391 CAD-ZN Solution £35.74 (5 litres) Plating Metals P392 CAD-ZN Anodes £12.26 Written for the home workshop, P397 Olive Passivate Solution £36.77 the book explains how you P901 Anodising Solution £45.96 (5 litres) can plate and protect metals P902 Anodising Cathodes £8.17 yourself using simple and P910 Strip Anodised Parts P906 Anodising Dyes £20.47 (1litre dilute for 5 litres) inexpensive methods. £90.89 (5 litres) State colour Ideal for the restorer. Reprinted 2002, 61 pages well illustrated. Previously anodised items can be Black Blue Green Red Violet Yellow stripped, polished and re-anodised as new. Kit contains tank, stripping solution, P911 Anodising Stripping Solution £45.96 (5 litres) power supply and ancillaries. P913 Anodising Stripping Cathodes £8.17 Order tel: 01706 658 619 ELECTROPLATING 19

P185 £84.77 (10 litres) P187 £59.23 (5 litres) Get a Chrome Like Lustre Super Bright

Get a brilliant, Chrome like lustre without the use of dangerous chemicals. Plate almost any properly prepared steel, brass or copper item. Contains Super P370 Common Plating Module Bright Anodes, 2-Super Bright Salts, £50.55 Trivalent Passivate, Super Bright CC57 Brightener, 10-litre tank, Scouring Powder, Needed With All Plating Test Kit and Instructions. Modules All modules NEED TO USE the same Passivate Plating Kits power supply, control and basic Both Kits below contain Zinc Anodes, equipment. A 10 litre tub, Power Supply, Brush-on Plating Kits two bags Zinc Salts, 2 - 5 litres of Yellow Variable Control Unit, Suspension Rods, Passivate (or Olive Drab), 10-litre Tank, P170 Zinc £66.38 Support clips, Crocodile Clips, Dust Mask Scouring Powder, Test Kit, Instructions. P360 Nickel £66.38 and Gloves. P198 £153.19 (10 litres) Brush-on Plating Kits JUST ADD ANY OF THESE MODULES FOR A FANTASTIC FINISH P199 £91.91 (5 litres) for Oversize Items Item too long for your tank? Can't Nickel Plating Kits Yellow: Get the original dismantle or repair plating damage on rust resistant yellow plating trailers, railings etc? Use our specially for door locks, under bonnet pipes, designed applicator brush test kit, and P200 £88.34 (10 litres) servos and custom applications. power supply. Dip the brush in the salts P202 £62.81 (5 litres) and paint several passes for decorative P396 £153.19 (10 litres) finish or cover more times for total Nickel: All cars and bikes P398 £91.91 (5 litres) corrosion protection. For plating on site built before 1930 - and some built after - use E165 Power Inverter. Brush nickel had Nickel Plating for bright work. With Olive Drab: Ideal for Military Vehicle plate on handlebars, link rods with the our kit you can reproduce the exact same and Land Rover Owners. The finish Nickel kit. finish in your workshop. The kit requires produced is far more durable than the See Electroplating Consumables for extras. the electrolyte to be about 30 degrees, so Super Bright or Yellow Kits. a tank heater is included, as well as 2 bags of Nickel Salts, Nickel Anodes, Scouring Powder, Test Kit and Instructions. Zinc Plating Kits

P195 £79.66 (10 litres) P355 £99.57 (10 litres) P194 £54.13 (5 litres) P357 £68.43 (5 litres) Zinc: Traditional electroplating Brilliant Nickel: With extra protection against corrosion. Ideal for rust Nickel Brightener this kit gives a more proofing those nuts, bolts and brackets. chrome-like finish. P355 contains the same Contains Zinc Anodes, two bags Zinc Salts, as P200 plus two P356 Nickel Brighteners. Trivalent Passivate, 10 litre Tank, Scouring Powder, Test Kit, Instructions.

P380 £78.64 (10 litres) P365 PrePlate Preparation P390 £102.13 (10 litres) (Cleaner & Neutraliser) P382 £49.53 (5 litres) £8.17 P394 £67.91 (5 litres)

Remove Oil, Grease, Matt Nickel: Some bike Cadmium-Zinc: The cadmium plating Wax and Polish components are plated for found on washers, racecar components protection rather than for cosmetic etc is unsafe to do at home. However, To ensure even, streak free plating, good reasons. Get the duller factory finish our system gives the same finish and preparation is essential. After using the with this kit! Contains Nickel protection, using chemicals, which are not P214 Scouring Powder, oil, grease, wax Anodes, 2-5 litres Matt dangerous. Contains 2- 5 litres Cadmium- and polishes are removed with PrePlate Nickel Salts, Scouring Zinc salts, 5 litres Post plating Solution, Cleaner and Degreaser (1 litre) followed Powder, Test Kit and Cadmium-Zinc anodes, 10-litre tank, by PrePlate Neutraliser (1 litre). Instructions. Scouring Powder, Test Kit, Instructions. 20 ELECTRICS Battery Order online: www.frost.co.uk

E128 Battery Mat £6.64

Prevent Acid Corrosion s Neutralises any acid spilled and repels moisture, consequently keeping the area under and around your battery clean dry and corrosion free. 20cm x 30cm. E620 Jump Leads £19.91 (3m)

Start Diesels or V8s Get full current (up to 600 amps) to start even diesels or V8’s with those top quality leads. Heavy wire (25sq.mm) and solid clips.

E158 Battery and Regulator E162 Battery Tester £11.40 Desulphater £39.50 E237 Memory Saver £20.43 Test Your Battery Extend the Lifespan Plug the tester into 12 volt Don’t Lose the Code! socket, switch on, and read of Lead Acid Batteries Prevent the loss of coded electronic the battery condition – weak, Batteries develop a build up of sulphate on memory for radio, e.c.u. and other stored fair or OK. Then, when the lead plates (particularly if the battery information when disconnecting a battery running, check the regulator is allowed to become discharged) which for maintenance or replacement. Plug it – Low, Normal or High. prevents good contact with the electrolyte into the car 12-volt socket and a hook up and therefore reduces the performance to the mains. of the battery. The power to operate the desulphater is taken from the battery being treated at 60 mA. Battery needs to be disconnected before use.

E345 Battery Terminal Protector and Indicator £5.62 (500ml)

Protect Your Battery! E193 Remote Starter £8.17 Cleans off corrosive deposits on battery terminals. The spray Push Button Turnover leaves a flexible, non conductive Connects to starter system with leads yellow film, which inhibits further E125 Terminal Brush £8.68 provided and allows push button turn- corrosion. If acid is present the over of engine. Supplied with 1.5 metre film will change colour to red, a Cleans dirt and corrosion from battery cableand instructions. Makes one-man simpleinsurance against damage terminals and cable clamps. Fits together operation possible for a variety of under to battery tray etc. for safe storage. the bonnet tasks.

E195 Jump Start £59.99

No Need of Jump Leads and s Another Battery to Start Your Car Turns almost any 12-volt starter with its powerful starting current. Provides 900 peak amps, 400 amps of starting boost for vehicles with a low battery. Dead easy to use, with heavy duty leads and builtin torch. Just recharge E190 Battery Charger £51.43 after use with the included mains adaptor. It’s clean, safe and won’t spill on your clothes. 6 and 12 Volt Charger Simple, economical and charges 12 and 6 click on: www.frost.co.uk for volt batteries overnight with its 5amp more products and web exclusive offers charge. 18x17x10cm (1.5kg). Order line: 01706 658 619 Battery ELECTRICS 21

NO MORE FLAT BATTERIES Our Original Battery Saver is Still the Safest and the Best Unique safety protection in the supply lead, which prevents short circuit conditions and possibly a fire, should the lead get trapped under the bonnet. Our Battery Savers are designed to maintain a healthy E150 Cut-Out Switch £11.23 fully charged battery and bring the battery up to full charge by trickle charging at a rate of 0.3A/hour. Battery Isolators They are intelligent designs, and unlike conventional battery chargers cannot overcharge the battery, even when left permanently Quickly and easily fitted to the battery, connected. Full short circuit and overload protected. Full protection against reverse with either round or fl at battery terminals. current flow from the battery. Maintains charge despite drain by clocks, alarms etc. Once fitted, a turn of the knob disconnects thebattery from the electrical system. A fused bypass is included so that power E171 6 and 12 Volt Battery Saver £29.50 is provided for alarm, radio or clock. Connect the clips to your battery and plug into the mains and your vehicle will always be ready to start. Can be used with the clips permanently connected to your battery terminals (perfect if your battery is hard to reach), or with the battery removed. Works on 6 and 12 volt lead acid batteries (sealed or unsealed). Clips should not be removed unless inline fuse is fitted instead. Note: the battery saver is not designed to replace a conventional high amperage charger unit, or to recharge from flat. E171E Battery Saver Euro Plug £34.21 With a two pin ‘Shuko’ connector to suit most continental mains supplies. E173 Extension Lead £4.09 (3 metres) E174 24 Volt Battery Saver £34.72 Ideal for Lorries and Standby Generators. E152 Master Switch £13.28

Very simple to fit anywhere in your car for safety and security. The car cannot, be started when you remove the red key. Its heavy-duty construction with solid brass nuts and rivets, solid copper terminals and a steelpinned key guarantees you years of use.

E179 Battery Charger / Monitor £57.19 E198 Battery Pulse Master £45.45 Charge Up and Maintain the Charge Pulse Charging Cleans Charge up a battery and maintain the Plates charge with just one unit! Its built in three Charges any 12 volt lead acid or gel step charge allows for charging up to 90% battery, sealed or not. It allows the battery capacity at 2.7amps, then switching to a to rest for a period then gives a pulse to timer controlled charge at 14.7 volts to E212 Battery Power Tester make a full charge. The pulse cleans the bring the battery to full capacityand finally £29.50 plates leaving the battery with full starting holds it there indefinitely with a float charge. capacity. Can be left on the battery Indicator lights show each charge step. Quickly indicates the state of charge of indefinitely. 12 volt batteries only. the battery on or off the vehicle and if the charging system is working correctly. Tester can check the charging system E130 ability up to 100 amp loading. An integral Battery Hydrometer £7.15 safety switch prevents sparking. Fitted with heavy duty plated clamps. Acid Test Suitable for most 6 or 12-Volt lead acid Measure the density of the electrolyte in the battery cells with this hydrometer: batteries. checks the charge of a battery and indicates if there is a damaged cell. 22 ELECTRICS Ignition Order online: www.frost.co.uk

Spark Plug Thread Chaser E115 £9.70 (14 & 18mm threads) s A simple service can become,a nightmare if you suspect blocked or damaged spark plug threads. It’s so simple to restore them however, with our Spark Plug Thread Chasers. Slip it into your spark plug socket and run it down the spark plug hole to clean threads of dirt, corrosion and to restore any crossed threads. E625 Magneto Timing Light £43.91

Black Flame-Thrower Coil Take Out the Guesswork E511 3Ω 4 or 6 cylinder £41.04 Knowing the moment the spark occurs E011 1.5Ω 8 and 6 cylinder hi-performance £41.04 is key to engine timing. Fit the crocodile Chrome Flame-Thrower Coil clips across the contact breakers, as soon as the points open a high intensity LED E501 3 4 or 6 cylinder £45.84 Ω indicator is visible. Complete with leather E001 1.5Ω 8 and 6 cylinder hi-performance £45.84 case and instructions. Epoxy Flame-Thrower Coil E611 3Ω 4 or 6 cylinder £48.51 E111 1.5Ω 8 and 6 cylinder hi-performance £49.22

40,000 Volt Flame Thrower Coils Can benefit virtually any distributor type ignition system. It delivers an average of 15% more spark energy and voltage, which allows larger spark plug gaps for added power, smoother response and better fuel economy. Fits existing brackets and is suitable for 4, 6, 8 cylinder applications. Choose from chrome or original equipment black, they’re oil filled for better cooling and voltage E230 Flash LED £6.13 insulation, or, for off-road and racing applications, get the black epoxy filled version. Good Alarm Impression! Negative earth only. Not suitable for original The constantly flashing LED on the electronic ignitions. dashboard gives the impression of a professionally fitted alarm. Kit comes E120 Gap Gauge £2.55 with 10-foot of wire and an inline fuse to connect to a 12-volt supply. Gap it Right Takes negligible current from the battery. Gap plugs accurately withthis tapered gauge. Easily fits in the pocket or on your keyring so you are never without.

L404 Ignition Systems By Des Hammill £14.00

Get the E110 Spark Plug Terminal Pliers E178 Electro Connector £12.26 Best from £7.15 Your Ignition Repair the Demister System Don’t Get Shocked DIY repair kit for broken window Covers all distributor With these specially shaped and insulated demisters. Also repairs printed circuit based systems, applies pliers you can now remove plug caps boards, radio antenna connections, alarm to all engine types and explains how to without fear of electrical shocks or burns. systems and lots of other low voltage set up or modify the whole ignition system Shaped jaws grip plug caps firmly to avoid electrical connections. Simple to apply to get the optimum power from your pulling on the H.T. leads. Ideal for trouble with great results, it knocks pounds off engine. 64 well illustrated pages. shooting faults, in your ignition system. the cost of replacement. Order line: 01706 658 619 Ignition ELECTRICS 23

E220 Spark Plug Cleaner £30.64 E221 Extra Grit £2.04 (1/2 kilo)

Blast Clean Your Plugs Clean up plugs to prevent poor starting and misfires. Just connect up to a E410 H T Plug Cable £4.60 standard airline and a two way valve (5 metres) allows for blasting or air cleaning.

Keep the Spark! Black PVC covered, Copper core, High Tension cable for wiring coil-distributor plugs. E135 Plug Spanner £4.60

500mm Long Spanner Get to diffi cult plugs with our 500mm long spanner fitted with a universal joint behind the socket allowing access to most 14mm plugs. LIGHT

E700 LED Headlight £9.00

Bring hands free light in to every corner with this powerful light- weight Led light. Lamp can be swivelled 120 degrees for viewing comfort. Has one switch to cover three E415 Ignition Terminals and brightness levels (18, 8, and two leds). Requires 3 AAA batteries, which lasts up to Covers £8.00 (10) 36 hours. Ideal in emergencies.

Ten Brass, coil and distributor terminals with covers for rewiring plug leads. E640 Miniature Inspection Light £29.95

Illuminate the most awkward places with this fl exible LED light. The 20cm long fl exible wire holds the shape you need to get into tight spots. Fits down 8mm hole. Requires 3-AAA batteries.

N335 Mini Flex LED £5.62

Flexible LED torch can be placed somewhere solid and the brilliant white beam M995 Dash Nut Spanner £21.00 directed where needed. Small enough to fit in the pocket. Complete with batteries.

Switch Spanner Your car‘s dash panel is the focal point of its interior. This tool is made to safely install and remove the round nuts that hold the switches onto your dash panel. Two diameters will accommodate the E225 Fluorescent Light £11.23 different sizes used. Large diameter is for ignitions (just under 1” OD), and the small 12 volt, 8 watt lamp gives loads of light without draining the battery. Designed to plug end is for the light switches (about 3/4 OD). in cigarette lighter socket and comes with 5 metres of cable. 24 ELECTRICS Wiring Order online: www.frost.co.uk

E105 Power Socket with Mounting Bracket £6.75

Use Modern Technology While on the Move Fit the power socket in or under the dash board (with mounting bracket) to use your Sat Nav, Road Angel or charge your mobile while out in your Classic.

Self Bonding Tape (10 metres) E145 Waterproof £6.64 (25mm) Braided Sleeving (5 metres) E108 Oil and Flame Resistant E400 £5.62 (5-12mm diameter) £17.82 (38mm) E402 £7.66 (8-17mm diameter) Strong black tape bonds permanently E404 £9.70 (10-20mm diameter) to itself as you wrap it around cables, Durable Protecting connectors, etc. No sticky adhesives to K230 Cool Tube £20.94 pick up foreign matter. Waterproof, high Polyester Sleeving gives durable protection voltage insulation, excellent ageing and over tubing, hoses, wire and wiring looms. weathering properties. Ideal for making Heat Protection It looks smart and holds wires tight. water proof spliced joints. Designed to protect fuel lines, wiring and Useheat shrink or tape to finish ends. brake lines from temperatures up to 260°C. The open weave provides for the The aluminised covering provides heat dissipation of heat and moisture. reflectivity reducing temperatures by an average of 43% as well as resisting abrasion, chemicals and condensation. 12.5mm (1/2”) x 914 mm (36”).

Wraparound Sleeves E800 9mm £9.70 (3 Metres) E801 13mm £11.23 (3 Metres) E802 18mm £9.70 (1 Metres) K405 Impregnated Tape £2.55 E803 25mm £10.43 (1 Metres) Old Fashioned Tape Tidy Under Your Dash Use old fashioned insulating tape for or Engine Bay! the final touch. The black impregnated E710 Wire Feed Tool £4.09 The sleeve is installed by opening up cloth tape gives that original finish. and feeding over the application then 25mm wide x 3 metres long. releasing. Once fitted, it is fixed at one It’s Now Oh So Easy! end, twisted, creating a firm, snug fit and Easily feed wires through grommets or finally fixed at the other end. guide additional wires through cable tied bundles with this cleverly designed feed tool.

Slit Tube Shrink Tube E180 7mm £1.53 (3 Metres) E200 6mm £3.06 (3 Metres) E181 10mm £2.55 (3 Metres) E202 12mm £4.60 (3 Metres) E182 13mm £4.60 (3 Metres) E204 25mm £3.06 (1 Metres) E183 13mm £1.53 (1 Metres)

The neatest way to insulate anything from K235 Non-adhesive Loom Tape a single terminal to a complete wiring Insulating and Protecting £4.09 (33m x 19mm) loom, the tube shrinks to half its supplied This flexible black plastic conduit, encases diameter when heated. Use a heat gun or all the wires in your engine bay and Wrap your cables in the traditional way. powerful hair dryer. See page 18 for Heat Gun. beyond. Insulating, protecting and tidying Simply pull your wires together and State colour: your wiring. Easy to use. Give your engine wrap around. BLACK WHITE YELLOW bay a professional look. Order line: 01706 658 619 Wiring|Miscellaneous ELECTRICS 25 s Bullet Connectors S210 Brush-on Insulation Liquid £11.23 (118ml) E186 Connector Unlike conventional tape which hardens, Pliers £24.50 peels and frays with age, ‘Brush-on’ forms an insulating coating that totally seals out Insert and close moisture, preventing corrosion and loose solder or crimp connections. Brush in lid makes it easy to nipples into apply; dries in minutes; remains flexible. connections with Ideal for repairs or sealing spliced wiring. these handy Adheres to metal, plastic, rubber, vinyl pliers. Designed andcomposite materials. tosqueeze with State colour: ease. BLACK RED

E188 Bullet and Snap Connectors Assortment £33.50 B280 Carbon Resistance Coloured Wire Soldering System £99.00 E300 Cable 44/.3mm, 27 amp Everything you need to connect the £4.60 (2.2 Metres) cables on your classic. Solder in Impossible State colour: Black, Blue or Brown This handy kit contains: Situations? • 25-Single Connectors With older cars 27amp wire is used for • 25-Double Connectors Particularly useful when making joints main, dynamo and alternator circuits. 2 in close proximity to each other or where • 50-Solder Bullets up to 2.0mm wire E310 Cable 28/.3mm, 17 amp • 50-Solder Bullets 2.5-3.0mm2 wire you need to avoid overheating the surroun- £4.90 (3.5 Metres) • 50-Crimp Bullets up to 1.5mm2 wire ding materials. The carbon tip gives a high • 50-Crimp Bullets 2.0-3.0mm2 wire speed, concentrated spot of heat where State colour: Black, Blue, Brown, Grey, Red, White All in a solid plastic compartment box. you want it. Fitted with duel temperature 17 amp for headlights, spot/fog lights, Use E187 Bullet Swage Tool to crimp selection for large or small jobs. screen heater and wipers. bullets. E320 Cable 14/.3mm, 9 amp £4.09 (6 Metres) State colour: Black, Blue, Brown, Green, Grey, Orange, Red, Purple, White, Yellow

9amp for ignition and sidelights etc. E187 Bullet Swage Tool £26.46 N555 Pro ll Portasol £42.89

• Produces a solderless connection Cordless Soldering on brass bullets This portable, self contained, gas powered • Leaves two flats at the narrow soldering iron has power adjustment giving crimp section of the bullet. 15 to 90 watts, at 580°C. Ignites from inbuilt Piezo switch. Refuels from a gas lighter refill taking a rapid 15 seconds. Has auto E330 Glass Fuse Assortment switch off when the cap is replaced. E159 Inspection Lamp with £4.60 (Set of 22) Transformer £36.77 • 1 1/4“ long x 1/4” diameter with flat ends were fitted to most classic cars E156 12 Volt Inspection Light • 2, 5, 10, 15, 20, 25, 35 and 50 amp rating. £21.96 s E635 Ceramic Torpedo This professional low voltage inspection Fuses £4.09 lamp is designed to withstand the most (70 assorted) severe workshop use, delivering an excellent beam to illuminate the trickiest A selection of ceramic/ torpedo task. Just plug the transformer in to the 240v fuses, 5, 8, 16 and 25 amp rating. mains. Fitted with generous 7-metre lead. 26 ELECTRICS Instruments Order online: www.frost.co.uk

E340 Infra Red Thermometer P217 Auto Test Jump Lead Set E630 Power Probe £30.77 £50.55 £3.57 (10 pieces) Component Check Temperature Test Test Leads Supplies a positive or negative voltage or Gives the temperature without contact, For a variety of auto test situations ground at probe tip you can check polarity; just point with the laser sighting and shoot. including bridging power from a relay to test continuity or power up components like Thetemperature is displayed on an LCD an electrical component, extending a lead, cooling fans, fuel pumps, wiper motors, panel. Check out manifold, brake and tyre probe situations, bridging power from relays and lamps prior to fitting. Makes temperatures; know if they are equal or a electrical feed to components etc. tracking short circuits and bad earths easy. problem. This pocket sized thermometer Powered by the vehicles own 6-12 volt DC measures –18°C to 260°C. power supply and fitted with sensitive trip device to prevent circuit damage. Computer safe and complete with 4.5m of cable.

E215 In-line Spark Check £8.17

Attach between HT lead and Spark Plug and see the bulb flash each time it fires. Check consistency from idle up.

E995 Wire Piercing Guide £4.09

Wire Test J385 Auto Current Tester £18.28 Ingenious device prevents stabbing your finger! Quickly, easily and safely guides Measure DC Current the pick point of most circuit testers E160 Brass Circuit Tester £4.60 Easily into the centre auto electrical wire. Holds the circuit tester in position allowing This solid brass bodied circuit tester Plugs straight into the vehicles fuse board you to work with both hands free. uses a car interior light bulb to test for and displays the current reading on the Impervious to gasoline, oil, thinners and continuity in circuits, contacts, fuses etc. large LCD display. Makes fault finding other shop chemicals. Store it on the Has removable screw cover over pointed much easier. Range 0-48 volt max 20 amps. circuit tester earth wire. probe for piercing cable sheathings. 12V battery included.

E210 Towing Socket Tester E196 LED Circuit Tester £10.21 £35.23 M556 Digital Multimeter £11.23 On its side, there are 4 LED’s, which light Test the 7 Pin Socket up to indicate 3, 6, 9, 12 Volts. Also built in Check it All is a neon indicator to show the regularity from the Drivers Seat The digital display helps make electronic of a spark plug firing. All contained in an • 6 LED display testing and analysis simple. With so many insulated body with a probe tip and a • Test brake lights, tail lights, indicators, functions this little cracker deserves a piecing probe for breaking into circuits hazards, stop lamp and fog lamp circuits place in any comprehensive toolbox. and through wire insulation. • 12 volt systems. Order line: 01706 658 619 Engine Maintenance MECHANICAL 27

M510 Colortune £30.13 (14mm) Adaptors M511 £5.62 (10mm) M512 £5.62 (12mm) M513 £6.64 (18mm)

Adjust the Fuel Mixture Simply by Colour For Most Engines Tests proved that Colortune can save petrol by enabling M550 Gastester £99.00 you to correctly adjust the fuel mixture at the carburettor. It actually provides a window into the combustion Keep Your Classic in Tune chamber as the engine runs, so you can adjust the colour of the combustion flame. Will your Classic pass its M.O.T.? The Gastester in repeated tests proved to be accurate to within half a percent. Motorcycle Colortune CO levels in exhaust gases are not only M774 £36.77 (12mm) important from an environmental point of M776 £36.77 (10mm) view but also are indicative of the state of tune of your engine. Easy to use, accurate, For Motocycle Engines and inexpensive, the Gastester can help Designed to take the higher heat and s you to keep your classic in tune, save pressure of a performance Engine, this petrol, reduce ‘Harmful’ emissions and low volume Colortune maintains the M560 Clikadjust £34.72 pass your M.O.T. test. compression ratio of the engine, ensuring better firing of the mixture. Do Tappets Accurately See the Motorcycle Essentials Section. Adjusting tappets requires three hands – one for a spanner, one for a screwdriver, and one for feeler gauges. On top of this clumsiness, a feeler gauge blade cannot account for wear on the valve stem or tappet face. Clikadjust sets all this right, using audible clicks to correspond to thousandths of an inch clearance. You simply close the gap right up and then count the clicks as you M500 Carbalancer £20.43 open it again. Suitable for conventional tappets and pre 1968 Fords. Keep Your Balance In order to equalise air flow through multiple carburettors, the throttle butterfly M525 Hi-Gauge Compression assemblies must be correctly adjusted. Tester £25.02 Carbalancer measures and indicates air flow accurately so that each throttle Check Cylinder butterfly can be synchronised. Increases performance and decreases Compression fuel consumption. Suitable for Weber, This tester has a flexible high pressure Dellorto, SU, Amal etc. hose and fits all 14mm and 18mm spark plug holes. Calibrated in imperial and M490 Lo-Gauge £19.91 metric pressure values, you can diagnose C275 Engine Flush worn piston rings, oversize cylinder bores, Vacuum Gauge £5.11 etc. Complete with trouble shooting guide Detects Faults and instructions. Removes Sludge Detects many engine faults including, spark misfires, leaking head gasket, Add to your oil before an oil incorrect mixture, when connected to change to clean deposits C270 Frost Carb Clean the inlet manifold from the inside of the £4.60 (500ml) • Accurately measures a vacuum (to minus engine and remove sludge. 1 bar) and pressure to plus 0.7bar (10psi) Essential for petrol and • Removes gums residues and • Checks turbo boost, suction and delivery diesel engines. One 250ml dyes quickly of fuel pumps and for multiple carburettor bottle for each flush. • Restores looks and efficiency. balancing when driving use as a fuel economy meter More Millers Oils More Frost Aerosols online Products in the Additives Use keyword: (Frost aerosol) • Comes with pipe, T-piece connectors and and Fuel and Oils Sections. instructions. 28 MECHANICAL Engine Building Order online: www.frost.co.uk

M570 Advance Xenon Timing Light £54.80 s Check Your Timing Ignition timing is fundamental. Using a ‘Strobe’ light you can adjust thetiming to ensure the most precise setting is made while the engine isrunning (up to 8000 rpm). Inductive pickup is easily connected around No1 HT lead. Powered by the vehicle’s 12 Volt battery, the Xenon Tube gives a bright white light allowing work outdoors. Dial allows up to 60 degrees of advance to be shown on the TDC mark. Complete with detailed instructions. M050 Engine Rebuild Kit £57.19 M445 Valve Spring Compressor s £24.50 N990 Carb Adjust Set £9.50

This handy little 10 piece kit contains the tools Engine Rebuild Kit necessary to make jetting changes, perform We were asked to come up with a basic normal maintenance as well as disassemble engine rebuild toolset. Assuming you have and rebuild your carburettor. Included are flat, the spanners, this is everything else you posi and torx and hex drivers, 13 and 9mm need to rebuild your engine: piston ring sockets, a long 3mm hex key socket, two jet compressor, valve spring compressor, adjusting keys and a handle. valvelapping paste, valve grinder set 2pc, piston ring installer, angled feeler gauge set, assembly lube. All you require then, M630 Plastigauge £12.77 is the know how. See our engine rebuild DVDs on the DVD section. Precision Clearance Gauge Before Easy to use, this simple but effective precision clearance gauge gives you the exact measurement between fitted surfaces. Ideal for split bearings and situations where a feeler gauge cannot reach. Measures .001-.007”. After 10 gauges per pack. s Cylinder Hone M420 £27.06 (50-170mm) M238 £24.12 (40-80mm) M236 Two Leg Hone £19.91 (19-55mm) s s M237 Three Leg Hone £21.96 M820 Pro Piston Ring Tool £13.28 M720 Piston Ring Installer £8.17 (19-60mm) Suit pistons 2 to 4” (50 to 100mm) Suit piston 3/64” to 1/4” wide Replacement Stones M241 for M238 £12.26 Don’t Bust Your Ring M242 for M420 £12.77 The professional tool has a clever linkage to support the ring and stop it twisting. M240 for M236 and M237 £9.19 Suits most car and bike applications. Clean Those Bores s M290 Seal Puller £8.68 Before installing new pistons and rings in an engine or replacing brake slave and Simplifies the often awkward job of removing master cylinder seals, the bores should be oil and grease seals from their seats in wheel honed. Honing removes the glaze from the hubs, engine blocks, transmissions, axles, etc. cylinder wall allowing the rings to bed in, Two tip sizes suit most applications. and aiding oil retention on the cylinder wall. Order line: 01706 658 619 Engine Building MECHANICAL 29

C170 Engine Cleaning Brushes £9.70 (Set of 4)

Make Way for Oil Oil contaminated with grit will soon ruin bearings, journals and cylinder bores in a rebuilt engine. Insure against costly damage with thesen sturdy nylon brushes to clean out oilways, tappet galleries, rocker shafts etc. Set of four brushes 5/32, 1/4, 7/16, 5/8 inch diameter, 12 inch long (4, 6, 11 and 16mm x 300mm long). s M535 Valve Lapper £32.68 M539 Set of 2 valve grinders with wooden shafts £6.64 Suction Cup Sizes: 19, 22, 32mm

Produces a Gas Tight Seal Quickly Produces a gas tight seal about 60 times faster than you could do it by hand, and D120 Porting Kit £36.26 M795 Piston Ring Groove Cleaner saves you from getting blisters. It fits all £13.79 drill chucks 8mm (5/16 inch) or larger, and Porting Increases has two interchangeable suction cups Cleans Grooves Easily and instructions for use. Operate on slow Engine Efficiency speed – up to 1250 rpm. Improve the gas flow in and out of your Neatly and quickly remove carbon and engine, increase its efficiency, and help residues from ring grooves without prevent future build up of carbon deposits. damaging the piston. Tool comes with 10 Chemico Grinding Paste (300gm) Set includes: sizes of cutter to cope with most grooves. Piston size from 2.75” to 5” diameter. M534220 Fine 220 Grit £5.62 • 1 off 6mm dia A24 and 1 off tapered A3 mini mounted grinding wheels M534120 Medium 120 Grit £5.62 • 4 off – 10, 12 and 19mm dia, plain and M53480 Coarse 80 Grit £5.62 tapered cartridge rolls in coarse and M53430/60 Extra-Coarse 30/60 Grit fine grades £5.62 • 2 off mandrels (1 for cartridge rolls and 1 for felt cones) Grinding • 1 off 30mm dia x 10mm flap wheel Paste for Auto, • 1 off wire de-carb brush • 2 off felt cones (1-12mm and 1-19mm dia.) Agricultural, • 1 off 80g bar polish. Marine and Aviation Uses Silicon carbide and lithium grease grinding C315 Carbon compound available in four grades. Used s in automotive, agricultural, marine and Remover aviation workshops, as well as in the £9.19 M440 Piston Ring Compressor mining industry and by DIY enthusiasts. £12.26 Dissolves M535 Chemico Double Ended all the Piston Installation Valve Lapping Black Bits Paste £3.57 Leaves both your hands free to insert your (110g) A non-caustic gel, which can be brushed piston assembly into your engine block on using the applicator supplied in the lid, without struggling to also keep the rings Comes in double ended leave overnight then rinse off. Can be used compressed. Easier to use and less risk of tin with fine at one end on all metals and vitreous enamels, except smashing your new rings on the top of the and coarse at the other. aluminium. Suitable for baked on oils and engine block. Fits piston diameters from greases, also works well on barbecues, 54mm-125mm (2 1/8” to 5”). ovens and Aga Stoves. 30 MECHANICAL Bolts|Threads Order online: www.frost.co.uk

Thread File T300 Metric £14.50 (0.75-3 pitch) T301 SAE £16.50 (13 - 24 tpi)

Restore Damaged Threads s Modern nuts and bolts are often cheap enough to replace, but what about captive threads or threaded components? In some cases a damaged thread can render a part useless. But it is possible to save threads with thread file. By running it carefully along the threads, the file will reshape the thread pattern and restore it, removing any damage or burrs. T204 Nut Drilling Jig £27.10

Thread Replacement Kits Make a Safety Wire Hole T7405 M5 x 0.8mm £39.00 To prepare nuts and bolts for locking wire T7406 M6 x 1mm £30.13 you must drill through adjacent faces of T7408 M8 x 1.25mm £30.13 the hexagonal head, an impossible task T7410 M10 x 1.5mm £35.74 without our jig. Using 1/16” drill, making T7412 M12 x 1.75mm £41.87 (No Drill) a safety wire hole is easy. T7431 1/4 UNC x 20 £26.04 T7432 5/16 UNC x 18 £26.04 (No Drill) T7433 3/8 UNC x 16 £31.66 (No Drill) T7449 M14 Spark Plug £67.40 (No Drill) Spark Plug Inserts (5) T7549 M14 x 12mm £6.64 T7550 M14 x 19mm £9.70

These kits are designed for repairing stripped or damaged threads without the need for any special engineering experience. Simply Drill out the damaged thread tap new thread and install the insert. All kits contain a number of inserts manufactured from high quality stainless steel. T200 Wire Twisting Pliers £21.60 T208 0.8mm Stainless Steel Locking Wire £17.95 (0.5kg spool) T209 Stainless Steel Wire £2.75 (5 Metres)

The Only Way to Twist Wire Evenly J205 Thread Pitch Gauge £6.00 In many vintage vehicles Wire Locking is the standard means of securing critical Check Out Your Threads nut and bolt assemblies. These 9” Wire This 53 leaved gauge covers all Metric s Twisting Pliers provide the only means and Imperial sizes you are likely to find in of twisting wire evenly without strain or a vehicle. Shape allows use on internal or J370 Thread Gauge £4.95 breakage. To prepare nuts or bolts for wire external threads. Each leaf is individually locking, drill through the adjacent faces stamped with its pitch. Imperial – 4 threads Identify the size and threads of machine of the hexagonal head – 0.8mm Stainless per inch to 42 tpi (31 leaves). Metric – 6mm screws and bolts. Includes American, Steel Locking Wire is then used to pitch to 0.25 mm pitch (24 leaves). Metric and Pipe Threads. complete the wire locked assembly. s Bolt Drilling Tool M880 UNF/C £25.53 M881 Metric £25.53

Safety Wire Any Bolt Safety wire or pin any critical bolt quickly, easily. With this drill guide you can drill any bolt size with a 1.5mm/ 1/16” size hole. Simply thread the bolt into the unit the required depth for your application. Next, drill your safety wire hole with no risk of misalignment. UNF/C accommodates 8-32, 10-32, 1/4-20, 1/4-28 and 5/16-24 bolts. Metric does 6x 1, 8 x 1, 8 x 1.25, 10 x 1.25, 10 x 1.5. Order line: 01706 658 619 Exhaust|Clutch MECHANICAL 31

Improve the Engine Longevity of My Vehicle? K420 Exhaust Wrap Kit £57.43 SAVE £6.38 K421 Exhaust Wrap £48.51 (15 Metres x 50mm) K425 Universal Clip £15.30 (8 Clips)

Keep Cool Wrap the exhaust to cool the engine bay, deaden noise and help exhaust extraction. Kit includes: 15 metre roll of 50mm wide white wrapping and eight clips. Will cover most four cylinder engines. Can be coloured with our high temperature exhaust paints. See Painting Section for Exhaust Paints.

M780 Clutch Aligning Tool £9.19

For Accurate Aligning This revolutionary universal tool makes quick work of accurately aligning the clutch and pressure plate before fitting. Supplied with three collets to fit most vehicles up to five tons except those s with double plate clutches. Instruction leaflet included. Clutch Tool M800 Imperial £13.79 M815 Metric £13.79

The Only Clutch Tool! Easily align the clutch plate on the M735 Exhaust Pipe Expander fly wheel for the fast refi tting of your £65.36 (3 piece) gearbox. The shaft and bushes provide a precise fit for eight different pilot bearing sizes in the back of the crank. While the Make Pipes Fit stepped bobbin has two turned sizes 1” Can be used in Situ on the car to restore + 1 1/8” fit the majority of clutch plates – warped or dented pipe back into shape. the cone handle adapts to the remainder. It will stretch all types of exhaust pipe to the required size. Ensures a perfect fit with no leaks and also removes dents and clamp marks. Supplied in carry-case. Sizes: Small 30-44mm, Medium 38-62mm, and Large 54-87mm.

G420 Non Damage Scrapers £17.36 (set of 5)

Safe Scrapers Set of five glass filled nylon scrapers with a variety of ends, general and curved for gaskets and stickers, hollow for pipes and tubes, corner and angled for sharp edges. M790 Exhaust Pipe Cutter £31.15 S455 Gun Gum £4.60 (200g)

No More Frustration with For Repairs to Your Broken Hacksaw Blades click on: Silencer that Stay Put Quickly cut pipes square and cleanly on www.frost.co.uk Easy to use paste which provides a gas- or off the car. Only requires minimal space tight seal when assembling exhaust for more products and and movement 1/4 of the way around the systems and can permanently repair small web exclusive offers pipe to be cut. (Not Suitable for Stainless holes and leaks in silencers. Works on Steel Systems). the wood burning stove too. 32 MECHANICAL Drills|Spanners Order online: www.frost.co.uk

G230 Right Angle Drill Attachment £30.13

Now You Can Drill Round Corners! This little gem attaches to your drill and allows you to drill at right angles where no ordinary drill can reach. Industrial quality, aluminium alloy housing. Drilling capacity 10mm steel and 16mm wood. s T210 19 Piece Drill Set £17.22

Top Quality Drill Set Don’t be searching for drills with this quality boxed drill set made in Germany. 1mm to 10mm in 0.5 steps.

M838 1/4”D Alldrive £29.62 (40 piece) s Includes, 13 x 1/4”D Alldrive Sockets: • 4mm – 14mm and 22 x 30mm bits in M268 Open Ended BA Spanner Phillips, PzDrive, Hex, Spline and Drill Guage Set £11.00 Star A 1/4”D 72 teeth ratchet J201 Imperial £22.47 (1/16”-1/2”) • Universal joint and 100mm extension bar J202 Metric £22.47 (1.5mm-12mm) Use the Right Spanner • Bit adaptor and Spinner handle Takes Away Guess Work This inexpensive six piece double M834 3/8”D Alldrive £23.00 ended spanner set in 12 BA sizes, saves (12 piece) The drill gauges take the guess work out spoiling those little nuts with your pliers. of choosing a drill. One for metric sizes, Sizes include: 0 BA to 11 BA, all in a Alldrive Socket Set the other for imperial. plastic wallet. six pieces. Sheet and Wire Gauge available in the These sets have a unique V type profile Bodywork Miscellaneous Section. that fits HEX/MM/AF/STAR and SPLINE fixings and still allows more torque to be applied than conventional tools. • Tapered profile that fi ts Metric, AF, BA, Torx, Star and Spline and most Whitworth fixings • One socket set fits most applications • Metric/Spline/Torx sizes are stamped s on each individual socket. 8 to 19mm. M910 1/2” Sq. Dr. Extension Bar with Integral LED Light T122 Whitworth Spanners £26.04 £9.70 M765 Torque BSF Threads Used on See the Nut with the Wrench £29.62 Cars Way into the 1960s LED Light This eight piece, drop forged, chrome See directly, the nut or bolt you are trying Don’t Over Tighten vanadium steel, combination spanner set is to access under the vehicle or in the Hub and wheel nuts (and head nuts) ideal for these nuts and bolts. Sizes 1/8 W, engine bay, as the LED light shines through should be correctly tightened. Micrometer 3/16W, 1/4W, 5/16W, 3/8W, 7/16W, 1/2W, the socket. Chrome vanadium steel, 63mm adjustment torque wrench has 1/2” square 9/16W. They are hardened, tempered and overall length, spring-loaded socket drive and a range 40-210 Nm (30-155 lnft). nickel chrome plated for corrosion resistance; holding, complete with batteries. Right-hand click only. then given a fully polished mirror finish. Order line: 01706 658 619 Release MECHANICAL 33

Remove Broken Studs? N220 Plus Gas Dismantling Spray £5.62 (200ml)

Plus Gas At last you can penetrate rust and release any seized up nuts, bolts, locks, you name it this will shift it. The brand s the professionals rely on. Drill Outs G220 £11.23 6mm (1/4”) G221 £11.74 8mm (5/16”) G222 £12.26 10mm (3/8”) G223 £12.77 12mm (1/2”) G225 Set of 4 £43.91 SAVE £4.09 s Removes Broken N208 2-Piece Nut Splitter Set M260 Stud Puller Bolts So Easily £12.26 (12-16mm and 16-22mm) Set £27.00 (4 Piece) That revolutionary tool simplify the often awkward task of removing broken bolts Remove Nuts Without Remove Studs and studs. Used in a 3 ⁄8” reversible Damaging the Thread Without Damage variable speed drill, the left hand selfcentering drill cuts down into the We have all experienced the frustration of During any major restoration project you damaged bolt, then the tapered collet bites being held up by one stubbornly seized nut. will encounter studs which need to be into the drilled hole and unscrews it all in To remove such corroded or damaged removed for repair or replacement. one quick operation. Made from precision nuts, without damaging the thread on the Trouble is how to do it without destroying ground high speed steel. Works every time. often more important bolt or stud, the last the studs? This set of four stud pullers are resort is the Nut Splitter. The hardened operated by a 1/2” drive ratchet or T-bar steel cutting tip is driven into the side so and grip the stud on three sides, tightening that it drops off. more the harder you turn, to remove even the tightest of studs. Much easier than risking stripped threads by using locked M850 nuts, etc. to 12mm studs. Impact Stud T709 Grabit 2 Piece £11.50 Extractor (Screw sizes 4 to 10) (5-6mm) £19.91 T710 Grabit 3 Piece £17.50 (1/2”diameter) (Screw sizes 4 to 14) (5-8mm) M852 Set 2 Piece Remove Stubborn Screws £30.13 (3/8” and 1/4” Frustrated with Posidrive / Phillips/Torks diameter) fasteners with a damaged drive? s The Grabit bit machines a conical hole Stud Extractor N805 Brass Punch Set £14.99 with one end of the bit, which matches the “easy out” at the other end. This innovative tool is fully adjustable and Won’t Damage Just need a slow drill with LH drive. can be used with air tools or standard Pins or Bolts hand tools on 6-12mm studs. It will effectively work on and remove threaded, When drifting them out. Use brass punches, N320 Free and Easy £4.09 (500ml) broken, rusted, stripped or smooth studs. this set will cover your automotive needs.

Loosen Off M905 Bolt-Grip Fastener Remover Set £26.55 (5 pieces) Advanced low surface tension penetrating oil with excellent Reverse spiral flutes are designed to bite down creep properties. Displaces to provide maximum gripping power to securely moisture, lubricates and grip and remove stubborn nuts and bolts. Set includes 3/8”, penetrates metal surfaces. 7/16” (11mm), 1/2”, 9/16” (14mm), 5/8” (16mm) removal Economical, that rust release sockets in a storage case. Has 3/8” square drive for use agent works just as efficiently with hand ratchets, impact wrenches, and hexagonal flats as the best of the rest. for use with spanners. 34 MECHANICAL Radiator Order online: www.frost.co.uk

Use Frost Stay Cool?

M785 Stay Cool with Corrosion Inhibitor £14.80

How to Keep Your Hoses On! Gives improved heat transfer, making a faster warm up and better cooling – up to 15°C reduction in engine M502 Radiator Fin Tool £6.50 operating temperature. Also contains a powerful anti corrosion agent, very important with aluminium, steel, cast iron and bronze engine metal mixes, should be used in all Better Cooling, Better engines. Does not contain damaging Ethylene Glycol but can be combined with antifreeze. Bottle treats 30 litres of coolant. 1 litre. Looking Radiators Damaged and flattened fins on radiators, oil coolers and condensers can impair its heat transfer properties and looks dreadful. The comb sets the fins back to their original shape allowing air to pass again. Also useful for cleaning dust and bugs from the intake side. The radiator fin tool has 6 different sized combs, which cope with most units.

Flush & Refill Cooling System?

F660 Bead Form I £434.04 M730 Anti-Freeze Produces a .050 tall bead on 5/8O.D.and larger tubing Tester £9.70 F661 Bead Form II £434.04 Used on tubing larger than 2” to form a 0.080 tall bead Check Your F662 Bead Form Junior £505.53 Coolant Level Used to form a bead on 5/16, 3/8 and 1/2“ tubing (8mm-13mm) Make sure your motor is Bead Former for Metal Tubing fully protected. Check with our new anti-freeze tester. Here is a hand tool that quickly forms a bead on metal tubing to retain radiator, heater The easy to read scale will core, intercooler, fuel lines, ducting and other pressure hoses. Designed to form a ensure you are not at risk 1.25mm high hose bead on 1.2mm wall steel, 1.5mm brass, aluminium and copper tubing. of tragedy with the incorrect (annealed stainless with a wall thickness up to 0.7mm) The positive action, gear driven coolant level. Better to be safe form rollers are designed for easy use with a crank handle (included) or ratchet. than sorry. It may be vice mounted or hand-held and comes with a handy carrying case.

M725 Radiator Hose Tool £11.23

Remove Radiator Hoses Quickly Remove radiator hoses easily and quickly with this specially designed hook which will loosen the hose prior to removal.

S485 Radweld M715 Block Tester £44.00 £5.11 (472ml) M716 Block Test Fluid £10.00 (250ml) Detect Exhaust Gases Ideal Cure Now you can detect exhaust gases in the radiator header tank. for Radiator Leaks! Block tester is a blue coloured reagent that turns yellow when exhaust gases are present. Get out of trouble quickly with a bottle This simple diagnosis can save you £’s. of Radweld. Seals a normal size radiator Supplied with bottle of fluid. leak in minutes. Order line: 01706 658 619 Miscellaneous MECHANICAL 35

J390 Flexible Probe Inspection Camera £170.00 (1000mm)

See What is Happening! inc’s brass blade State-of-the-art camera with a 2.4 TFT LCD colour viewing screen and 1M flexible probe with a 10mm diameter camera head illuminated by six high power LED's. Gives a high resoltion picture

Angled blades for of areas that are difficult to see with the naked hard-to -reach areas eye - i.e. inside of cylinder chambers, vehicle door spaces, corrosion checks and many other uses in the automotive workshop. Features a PAL J120 Feeler Gauge £14.00 video-out connection cables allows real-time viewing or video recording. Powered by four AA Includes 11 blades (0.008”-0.026”) to batteries (supplied separately). use in hard to reach areas – setting points, tappets,etc. J125 Angled £12.00 Includes 22 blades (0.004”-0.027”) and features ground tips providing a 0.002” Go-No-Go facility for super accuracy. J130 Go-No-Go £15.60 J124 Set of 3 £38.11 SAVE £3.49

Feeler Gauge Set J355 Flexible Metre Long Includes 32 blades (0.0015”-0.035”) and J150 Hook and Pick Set £5.11 Magnetic Pickup Tool £5.62 one brass blade (0.010”) to use for setting electronic ignition systems. Save Your Fingernails Will Pick Up Over a Kilo! Finger nails just aren’t long enough to This super strong magnet will pick up over remove O-Rings, cotter pins, seals etc., so a kilo. Electrically insulated, it can be used here is a useful kit comprising of a Straight by many trades including electricians to Pick, Hook Pick, 90 degree Hook and O- retrieve out of reach items. A 6mm magnet Ring Hook. tip is fitted to a metre long flexible rod.

N590 Oil Dipstick Wiper £4.09

Do A Proper Oil J225 Extending Magnetic Pick-up Tool £9.60 Level Check J230 Extending Mirror £8.17 J227 Both Extending Tools £16.00 SAVE £1.77 Simply stick the pad to a suitable location in the engine bay. The lightweight anodised aluminium body houses a foam Collect Your Spanners from the Undershield core allowing you to do a proper oil level Magnet has a capacity of 1.5 kilos. Collects your spanners from the undershield as well as check by passing the dipstick through dropped nuts washers and bolts. (this will wipe the oil off). Also incorpor- ates a collar allowing you to close it N236 after use to prevent oil drips. Latex Gloves £6.99 State size: Medium or Large

These hard wearing M135 Multilube £4.09 gloves save time (500ml) and scrubbing when tackling Non Silicone s messy paint or oily jobs – just throw Conveniently lubricate locks, V148 Coloured Wipes £4.09 them away and your hinges, bonnet catches, cables hands are spotless and much more with our Ideal for wiping up oil, grease, water and at the end of the specially formulated lube. your engine bay. 1kg/12 meters. day. (box of 100) 36 MECHANICAL Miscellaneous Order online: www.frost.co.uk

S420 J B Weld Adhesive £6.97 (28g)

Make Permanent Metal Repairs • Save time and money: the tensile strength of 4000 psi enable you to make permanent repairs • Withstand temperatures up to 300°C: ideal for working in and around engines • Does not shrink or crack, while it dries (500g) • Once dry it can be treated like metal, drilled, tapped, machined, polished or painted. Rubber Moulding Kit R099 Soft £60.77 R100 Medium £60.77 R101 Hard £60.77 N290 Soft Jaws £13.28 R102 FL-10 Metal Primer £26.00

s Protect Delicate Make Copies of Original Surfaces with These Rubber Moulded Parts Vice Jaws On most older vehicles you will find dozens Protect chrome, polished or delicate of rubber moulded parts which over the surfaces with these polyurethane vice years have dried, split, corroded and worn jaws. Durable and simple to attach. away – many of them irreplaceable. Fits most Record Vices. Now you can make copies of original parts with this moulding kit. Grommets; gaskets; door and bonnet stops; pedal covers – can all be produced. The two part kit comes with basic instructions, but we strongly recommend the book ‘How to Cast Small Metal and Rubber Parts’ if you have had no previous experience.

L310 How to Cast Small Metal & Rubber Parts by W A Cannon £13.00 K225 Reflect-A-Cool £66.00 click on: M988 Imperial Hex Key Set Deflect Heat from www.frost.co.uk £11.74 Firewall, Bonnets, etc for more products and web exclusive offers Comes with Free Pliable and easily installed wherever Metric Keys you need maximum heat deflection. Reflective material with an adhesive back, Fantastic quality, 13 piece, Bondhus combining fibreglass and an aluminised M620 Copper Anti-Seize Imperial Hex Key set comes with a FREE layer of foil. Ideal for deflecting heat from £6.13 (500ml) nine piece metric set and a lifetime firewalls,bonnets etc. up to 538°C and will guarantee. Imp sizes .05 to 3/8”. protect against a continuous temperature Spray Copper Metric sizes 1.5mm to 10mm. of 204°C. (48”x 36”). • Eliminates pitting, rusting thread distortion, grabbing M885 Accelerator Pedal Depressor and seizure £21.96 • Lubricates, seals and protects at temperatures up to 1200°C • Ideal for use in pressure gaskets, hoses and hydraulic Set Engine Speed fittings. Great tool for one-man operation. Allows engine speed More Frost Aerosols online to be set, ideal for checking emissions and brake lights. Use keyword: (Frost aerosol) Order line: 01706 658 619 Miscellaneous MECHANICAL 37

M845 Automatic Number and Letter Punch £13.79

No Need for a Hammer Place this punch on your work and press – the springloaded handle “hammers” your punch mark for you! Just insert one of the hardened punches into the handle, adjust the amount of tension needed to mark your wood or soft metal, and press down on the handle to mark. Set contains handle, 26 letters, nine numbers, decimal point, ampersand, and plastic storage case. Letters/numbers are M799 Big Letter and Number 4mm tall by 3.5mm wide. 38 pieces. Punches £29.50

Be Visible With These Metal Stamps F195 Suitable for marking metals and other Brass hard materials, these letter and number M130 £11.95 (2lb) Hammer punches make big 1 cm high characters. M132 £8.95 (1lb) £9.00 (1kg) Manufactured from high quality carbon steel with hardened heads to ensure high Dead Blow Deliver the quality impressions. Useful for stamping Hammer Perfect Blow identifi cation of mating parts, post codes on tools, cycles or nameplates. Put the force right where you want it Deliver the perfect blow, without the risk with these shot filled rubber hammers. of damaging expensive or irreplaceable Lead shot inside the head shifts to components. Perfectly weighted with create a solid driving, no-bounce impact. a narrow head to reach into those Soft face will not mark your work. awkward spaces.

J260 Parts Marker White £5.11 J261 Parts Marker Yellow £5.11

Marks Parts The ball point regulates the flow and the s quick drying paint will adhere to rough, smooth, wet, dry and even oily surfaces. G305 Pistol Saw £10.21 Available in white and yellow. Use as a Jig, Keyhole and Hacksaw Hold a hacksaw blade with precision and comfort. Get into places where a frame will Z360 Tool Guard VCI £13.79 not allow. Use as a jig saw, keyhole saw or hacksaw. (3 pieces)

Protect Tools and Parts These units release inhibiting vapours, which blocks J110 Digital Vernier £26.04 s corrosion on iron andsteel in damp and J270 Micrometer Blue Micro Accuracy humid conditions. £4.09 (38g) • Provide up to 12 months protection in Incredible micro accuracy, suitable for a volume of up to two cubic feet Check Fits measuring internal, external and depth • Protect tools and components in storage dimensions. Automatically converts cases, toolboxes and tool chests. (Large Micrometer Engineers Marking Blue gives imperial to metric at the touch of a button items or components can be protected a clear perfect mark on any metal, in any then simply reset the display to zero. by placing inside a strong plastic bag light and being a lubricant cannot damage Bring the ultimate in scientific into which a unit has been placed). bearings or other working parts. measurement into your workshop. 38 WORKSHOP Order online: www.frost.co.uk

Wherever Metal is Attacked - Plasti Dip Performs! One of the most flexible coatings you can imagine with 1,000s of uses forthe mechanic, electrician, gardener, plumber or Do-it-Yourselfer. Simply dip the item and allow to dry, the more you dip the thicker the coating. Plasti-Dip Coating S220 £12.77 (429ml) not available in white S223 £78.00 (3.78 litres, US Gallon) M889 S221 Plasti-Dip Spray £12.77 (311ml) Combo Punch Set £17.75 not available in blue or yellow 14 Piece Punch Set. No excuses now for State colour using expensive silver steel or old nails as

BLACK BLUE CLEAR RED WHITE YELLOW drifts. This pin punch set covers the range and with its neat pocketed case, will allow • Spray, brush or dip it you to pick the right punch for the job. The • Tough hard working finish that does combo punch set contains 8 brass punches not crack, chip or peel from 1/16th to 5/16th and 5 long steel • Protects and insulates parallel punches 1/8th to 3/8th plus a • Adheres to metal, plastic, rope, wood, centre punch. Comes in a plastic pouch. wire, glass, concrete even rubber • Retains its elasticity even under the harshest conditions • Impervious to moisture, salt water even battery acid • Quick dry formula allows use of the Perfect for hard to reach applications, item in 8.5 hours after 2 coats. under wheel arches etc. Applications include: steering wheels, metal studs, mounting brackets, battery S225 Plasti-Dip Thinner trays, rubber boots, plastic wing flares, £11.74 (946ml) rocker panels, manifold parts, tyre levers, clutch and brake levers, speakers, cables Formulated for best results when etc. Spray can for added convenience brushing or spraying Plasti Dip with when you have larger areas to cover. airless spray equipment. Y958 Propane Heater £117.00 Keep Warm in N330 Hard Base Tool Bag £12.26 Your Garage Our brand new, lightweight and compact Perfect for a Boot Tidy! propane heater combines fantastic

s Don’t damage the interior of your car with performance (14.7kw) and value-for-money. sharp toolboxes. This bag has 23 pockets Ideal for workshops and garages, supplied for smaller items and is closed with a zip. complete with gas hose and propane Extra wide opening with waterproof regulator. It sits on a steel base, which bottom. Reinforced carrying handles. allows height to be adjusted. Just needs 410mm (L) x 228mm (W) x 290mm (D). a propane bottle and a 230 volt supply to keep you comfortable in the winter.

N715 Scepter Plastic Water Can N200 Scrubs £9.19 £44.00

• Lighter than metal cans Waterless Hand Cleaning • Won’t rust or crush Towels • Extremely rugged Unique patented • 20 litre can. M985 Mechanic’s Mat Set £24.51 waterless hand cleaning Plastic Fuel Cans towels, condition hands are available in the Save Knees! whilst removing Fuel Section. embedded grime and The quality set comprises of full- length grease. Even cleans State colour (980 x 380 x 28mm) and kneeler mats cracks in the skin by (450 x 215 x 28mm). Perfect for roadside dissolving dirt without BLACK BLUE repairs or for use on cold workshop floors harmful solvents. when working on wheels, brakes, tyres and exhausts, etc. Order line: 01706 658 619 WORKSHOP 39

C600 Ultrasonic Cleaner £99.70 s C601 Cleaning Concentrate £16.34 (1litre)

This professional cleaner is fantastic for cleaning threads, electrical items, jets, carburettors, small gears. Also great for home items (glasses, jewellery and dentures). Larger items can be done a section at a time. For a more thorough action, add Cleaning Concentrate, which improves removal of tarnish, carbon G320 Safe Saw £56.00 and rust. G321 Replacement Kwik Cut Blade • 2.5L stainless tank fitted with inbuilt heater set to 65°C, for better cleaning £25.02 • Digital 5 step timer and auto switch off • Tank size 264 x 164 x 80mm. Convert Your Angle Grinder into a Saw Y130 Floor Standing Parts Washer £110.00 Convert your 4 1/2” angle grinder in to a saw. Just attach this safe saw system with H140 16” PVC Gauntlets £2.55 its 115mm universal Kwik cut blade and zip C130 Parts Cleaning Brush £4.08 through most materials, including wood Ideal for garage workshop and industrial applications, (with nails), plastics, laminates, aluminium, this robust all steel washer is used for cleaning and steel and iron up to 8mm thick. Boxed kit degreasing automotive and machinery components. includes a special guard shroud and Extra large tank with component shelf, plus small arbour inserts to adapt to any angle parts tray. Accepts all common degreasing agents. grinder. Fluid capacity 45 litres. Easy maintenance pump (230v). Fusible link automatically closes lid in case of fire.

L490 Zeus Chart £6.00

Workshop Data A reference and data chart book for your workshop. The laminated Zeus Chart fits M700 Padded Garage Creeper in a pocket £27.57 BY605 Pair of Dollies £65.36 and will not pick up dirtor grease. 28 pages contain data on drill sizes and decimal equivalents, Now with Adjustable Move Sideways with Ease threads, tapping and clearance drills, Headrest Move your car about with ease, push it UNF, UNC, BSF, BSW, Metric coarse Save your overalls! How many pairs or to the side of the garage while you work and fine, hardness comparison tables, overalls have you worn away by sliding on components, bring it out again to allowances for sheet metal bending on the fl oor under your car? Our welded, reassemble. Indispensable in a showroom. and more. padded steel creeper with six swivel 500 kilos / wheel. Takes up to 10” wide castors is a must ease and comfort. tyres. Fits anything from a Mini to a Chev. s M980 Two Ton Cross Beam Adapter £59.50

Ideal for That Extra Safety! Convert your jack to provide extra safety when locating awkward jacking points. Ideal for front wheel drive vehicles. Includes rubber covered saddles. Fits trolley jacks with 1 1/8” hole when jack pad removed. Max width 820mm, minimum width 580mm. Pad screw adjustment 75mm. 40 WORKSHOP Order online: www.frost.co.uk

Workshop Essentials s G213 Drill Press £84.50

13mm (1/2”) capacity 5-speed drill press allows you to drill holes accurately. Speeds 545-2530, chuck to column 105mm, chuck to base 260mm.

s G217 Drill Grind Attachment £13.79

For quick and easy sharpening of blunt drills. Includes bench mounting facility and fast, easy, angle changing. BY121 Engine Stand £66.18 (450kg)

G215 6” Heavy Duty Bench s Rotate for Access Grinder £54.13 Once your engine is removed, mount it to Powerful 250-watt motor lifts our engine stand for its rebuild. 450 kilos this grinder out of the DIY class capacity, suitable for most engines and and making it capable of cleaning gearboxes. Four wheels. with a wire brush, polishing with mops as well as fettling and grinding. Sharpen blunt drills with our Drill grinding attachment. s BY105 Bench Grinder Stand £43.91

This heavy duty cast iron stand has a multi-slotted top designed to suit our bench grinder and other makes, with either two or four bolt mountings. Feet include holes for anchoring the stand to the floor. (LWH) 390 x 400 x 865mm.

BY050 Tool Cart £49.90

Push Your Kit with You Take your commonly used tools to the job with this robust cart and look after your dismantled parts and fasteners by dropping them on the top tray. Large rubber wheels let you go over bumps and cables. 2’6” high x 2’ long approx. Can carry 70 kilos.

Y630 Shell Cradle £129.00 (each)

It’s so Easy to Move Your Wheel-Less Car Around Move your wheel-less car or shell around the garage with ease as well as safety. Large castors roll effortlessly and swivel in all directions. Will take up to one ton and has adjustable height up to 500mm. M745 Jack and Carry Case £28.60

Jack in a Box N456 s Leather Gloves £2.55 Very popular jack with details like Protect Your Hands integral carry handle and a good price make this a top seller. Height Essential for garage or garden when range from 135 to 340mm. The case handling sheet steel, grinders, sharp edges is ideal for carrying in the back of or building materials, rose bushes etc. the car. Order line: 01706 658 619 WORKSHOP 41

Body Roller Hydraulic Wheel Skates BY609 9” Pair £149.50 BY612 12” Pair £169.50 BY602 Stand for 2 pairs of skates £49.50

Lift and Move Your Vehicle with Ease Hydraulic Wheel Skates are a combination of jack/dolly, which enable you to lift and Roll a VW Camper? move a locked, blocked or disabled vehicle. Simply slip unit around wheel, pump the lifting lever to gently squeeze the tyre between its two rollers lifting the wheels from the ground. The rollers touch only the tyre up to 9” or 12” wide – no contact with the vehicle frame or under carriage. A pair lifts over one tonne and allow easy Y620 Body Roller £459.00 manoeuvring of the vehicle on its 4” castors.

Unrestricted Access to Work on Your Car Underbody Gives unrestricted access to work on your car underbody. Quickly and easily fitted, the frame is tipped over to allow you to work standing upright in comfort and safety. Work in better light – no dirt in the face or eyes while cleaning or rustproofing and no risk of welding burns. Max weight 2,500 kilos. Suitable for use with 4 and 5 N625 Frost High Visibility studwheels. Adaptors available for 3 stud Waistcoat £4.99 and knock off wheels. N600 Exhaust Extraction Make Sure You’re Seen! System £99.00 N610 Carbon Monoxide Alarm On our busy roads, having to stop for a mechanical or an electrical fault can be £50.04 hazardous. It makes sense for you to be N615 Extraction Kit (both items) seen, particularly in poor light. You should £137.87 SAVE £11.17 carry one. Fully certified to EN471, class 2. Velcro front fastening. 100% Polyester with Don’t Get Poisoned double refl ective banding. Be safe from asphyxiation, when State size: Small, Medium, Large, XLarge, XXLarge. working on your car with the engine running. Fix heatproof flexible pipe from exhaust pipe to window, garage door or outside wall. Complete with clip to exhaust, pipe and exit plate, not suitable for commercials. Carbon Monoxide alarm will sound M750 Three Ton Axle Stands long before dangerous gas levels are reached. Worthwhile safety at a £20.95 (pair) modest price. Safely Support Your Car for Extended Periods M743 Jack Pad £27.06 of Time! Sturdy and stable, these heavy-duty Save the Underside stands have a useful ratchet action for Protect your jacking points or chassis by quick adjustment. Height Range from 280 fitting the protective pad over the jack to 420mm. platform. Inside diameter 140mm. 42 DVD’s Order online: www.frost.co.uk

Learn How to Work Metal with the Experts!

Ron Covel

L701 Shaping Aluminium with Hand L720 Building a Chopper Ron Fournier Tools £30.24 (105 min) Chassis £30.24 (70 min) Watch every step of making a track See a chopper frame built. Ron starts with L790 Gas Welding Aluminium roadster nose. Includes annealing, mallet an overview of frame design, explaining and sandbag rough shaping, hammer rake, trail, and stretch and the use of £16.34 (50 min) and dolly smoothing, metal finishing chassis jigs. He shows how to bend and Ron Fournier shows how it is done, and welding. fit tubing to create a chopper. With this the position, the speed, the fluxes instruction, building a frame may be and equipment to produce the L726 High-Power Metalshaping easier than you imagine! best results. £30.24 (85 min) A demonstration of the fastest techniques L721 TIG Welding Basics L791 Hand Tool £16.34 (90 min) for shaping panels. Watch the Yoder power £30.24 (80 min) Ron uses his expertise to show us the hammer, the Eckold machine, the Pullmax, TIG welding can make beautiful, strong correct equipment and how to use it and the planishing hammer each rapidly welds on nearly any metal. Ron covers the to achieve the perfect finish. and accurately shaping metal. basic processes, covering machine setup, joint preparation, electrode selection, L792 Large Tools £16.34 (90 min) torch technique, and more importantly, L703 Basic Techniques for Working The correct use of workshop what to check for when things go wrong! with Steel £30.24 (100 min) equipment is explained in detail Ron’s description of TIG welding, with the Starting with a 1932 Morgan in bad includes benders, folders, swages etc. close-up photography makes the process condition, Ron goes through every step of easy to understand. perfectly restoring the body. Covers hole L793 Blocking and Smoothing filling, patch panels, wired edge repair, £16.34 (90 min) rust repair, TIG welding, metal finishing, L725 Advanced TIG Welding and shrinking. £30.24 (111 min) Learn how to hammer out a wing, motorcycle mudguard or bonnet bulge Covers advanced topics of TIG welding, and smooth out with a wheeling welding chrome moly steel, stainless steel, L704 Working with Tubing machine. £30.24 (95 min) aluminium, magnesium, bronze, copper, and titanium. Also welding castings made Includes bending with heat, bending with from aluminium, magnesium and bronze. L794 Bucks Patterns and Forms machines, mitering, flaring, and tapering £16.34 (50 min) tubing. Show how to create anything from simple water pipes to elaborate headers. L722 MIG Welding Made Easy Break the most complicated shapes Most techniques use only shop equipment! £30.24 (70 min) down into bucks and patterns so each section can fit to form a wing Clear descriptions are given of how each or complete car. L712 Making Motorcycle Gas Tanks factor affects the weld, including wire £36.00 (167 min) speed, voltage, stickout, gun angle, travel Ron makes two different gas tanks, a speed, and gas flow. Covers plug welds, chopper style tank made from steel and a patch panels, welding aluminium, and comma-shaped tank made from aluminium. using flux core wire.

L717 Chopping and Sectioning L724 Scratch-Building a Fender £30.24 (100 min) £36.00 (119 min) Find where to cut, different ways to cut, Shows how to use an existing wing to Learn How to and how to fit the pieces back together. design a buck, to make the opposite wing. Rebuild Your Engine Uses the Wheel, planishing hammer, and Ron determines the number of pieces to Pullmax, plus TIG welding and plasma make it from and exactly where to place L900 Lotus Twincam £21.60 (62 min) cutting. Attention is paid to getting the seams and how to form the rolled edge L901 BMC A Series £16.80 (40 min) of the wheel opening. uniform gaps. L908 Jaguar 6 Cyl DHOC £30.59 (65 min) L909 Austin Healey 3000 £16.20 (35 min) L719 English Wheel Techniques L700 Classic Restoration Profiles L911 Triumph TR3 £17.28 (50 min) (60 min) £30.24 (86 min) £16.34 Watch the dismantling and renovation of Ron shows the basic ’tracking’ patterns See repair work and a a classic engine. See how to remove the that are used to shape panels of various wheeling course. Learn head and ancillaries, service /renovate sizes and configurations. how a veneered interior and re-build. Service the carburettor and is restored plus building distributor. Set engine and ignition timing a new ash frame into a and tune/balance the carburettors. More DVD’s 0nline Rolls Royce. DVD’s come with engine data sheets. Order line: 01706 658 619 Brushes and Chemicals CLEANING 43

Bevel Brush C191 Cup Brush C202 Ruftuf End Brush C207 Single Hand Grinders Twist Knot C190 Cup Brush £10.21 (65 dia M10 x 1.25) Brushes C191 Bevel Brush £10.21 (100 dia M10 x 1.25) • Top quality brushes C195 Cup Brush £10.21 (65 dia M10 x 1.50) manufactured to the highest Drill Strip Disc C196 Bevel Brush £10.21 (100 dia M10 x 1.50) specifications. Perfect for C285 £5.11 (100mm) Angle Grinders heavier cleaning jobs, C286 £7.15 (150mm) C200 Cup Brush £29.62 (120 dia M14 x 2) removing paint, rust, scale, C283 Arbour for above £4.60 C201 Bevel Brush £12.77 (115 dia M14 x 2) carbon and adhesive etc. • Produce an excellent surface C202 Cup Brush £10.21 (65mm M14 x2mm) Shaft Mounted Strip Disc for painting or polishing. High Speed Drills • Different size threads for use C284 6mm spindle £5.11 (100mm) C205 Cup Brush £11.23 (65 dia 6mm Shank) on Single Hand Grinders, Strip Disc for Angle Grinder C206 Circular Brush £8.17 (75 dia 6mm Shank) Angle Grinders and High C287 £7.15 (115mm) C207 Ruftuf End Brush £10.21 (20 dia 6mm Shank) Speed Drills. C289 £10.21 (178mm)

The Perfect Painting Surface • The finest surface cleaners for paint, rust or filler • Do not scratch the base metal provides Flap Disc 115mm (4-1/2”) the perfect surface for primer, paint D151 40 Grit Coarse £4.60 or body solder. D152 80 Grit Medium £4.60 C300 Six Brush Set £5.62 D153 120 Grit Fine £4.60 D150 Set of 3 Flap Discs £11.75 Steel, brass and nylon filled heads. SAVE £2.05 Suitable for cleaning points, spark plugs and other delicate components. Flap Disc 178mm (7”) D161 40 Grit Coarse £5.62 D162 60 Grit Medium £5.62 C305 Heavy Duty Citrus D163 80 Grit Fine £5.62 Degreaser £4.09 D160 Set of 3 Flap Discs £14.81 (500ml) SAVE £2.05 C240 Stainless Steel Wire Wheel • Removes stains, £14.81 Removes Scratches coatings or deposits of oil, A Very Valuable Tool grease and dirt Now make your grinder finish welds, • Leaves little or no deposit filler. These wheels are as effective as 80mm diameter wheel is ideal for cleaning • Can get into difficult corners. grinding discs without the aggression. up aluminium work. Its stainless steel bristles prevent contamination and give long life. Also a valuable tool in a marine C265 Chassis Clean £9.19 (5 litres) N540 Solve Aerosol £6.13 (400ml) environment. N541 Solve Liquid £6.13 (400ml) Remove Grease and Road Dirt Cleans Oil C120 Mule Skinners £12.77 Marks from s An aggressive water Your Drive In use the bristles of based cleaner, ideal an ordinary wire brush for use with a Remove brake fluid, bug bend, flex and break off. pressure washer for splats, car oil, grease The wire bristles of the cleaning grease, marks, silicone, tar, tree mule skinner are set road film etc from sap, wax or WD40 from in resin, preventing chassis, engine bay, car mats, concrete, breakage and holding and other oily electrical parts, glass, them perpendicular to components. jewellery, paint, plastics the job. This means they Can also be used concentrated or rubber. Use the aerosol clean as intended giving many times with a stipple brush for local cleaning. for fabrics. the life of an ordinary rotary brush. 44 CLEANING Blasting Order online: www.frost.co.uk

C615 Spot Blasting Gun £30.13 E221 Blasting Grit £2.04 (0.5 kilo)

Clean Without Damaging the Surrounding Area Clean up small spots, spiders, stone chips etc on metal or wood without damaging Y990 Standard Cabinet £418.72 the surrounding area. The media is BY998 Replacement Gun £35.23 recycled keeping consumption to a minimum. Comes with an assortment of C159 Viewer Liner £15.66 (30m) nozzles to cope with flat, inside and H115 Replacement Gauntlets £16.34 outside curved surfaces. Grit included. Requires 11cfm.air. Self Assembly Blast Cabinet C150 DIY Cabinet Kit £132.76 Everything you need to build a full size steel C151 Replacement Economy Gun blast cabinet comes in this comprehensive £22.98 kit – you just assemble it with a rivet gun. Made from 18 swg galvanised steel. C159 Viewer Liner £15.66 (30m) The detailed construction booklet will guide H115 Replacement Gauntlets £16.34 youthrough assembly. There are no extras to supply. The kit comes with blast gun, The Cheapest Way to hoses, light fitting, gloves, 6mm laminated Set Yourself Up with glass window; we even supply the steel rivets. Cabinet internal dimensions are a Blast Cabinet 58 x 58 x 58 cms. Overall height 157.5 cms. Our popular D.I.Y. Cabinet Kit is still the We recommend minimum 10 c.f.m. cheapest way to set yourself up with a displacement compressor. This is the best blast cabinet. Our kit has all the essential value cabinet on the market today. fittings (blast gun, hoses, gloves, window, light fi tting, screws, couplings etc) plus plans for you to build the cabinet yourself from two 8ft x 4ft sheets of 10mm plywood, which you supply. All you need are a few basic D.I.Y. tools and a weekend of your C100 Pressure Blaster time. Cabinet Interior approx. 58 x 58 x £224.68 58cms. We recommend minimum 10 c.f.m. W180C Face Shield Clear £22.50 displacement compressor. Y110 Expendable Grit £10.55 (25kg) Size 0.7mm H120 Dust Respirator £4.60 Coverall H130XL X Large £5.11 Blast Away H130L Large £5.11 Our Portable Pressure Blaster fitted Head to Toe with atungsten nozzle and rubber hoses, provides you with the most thorough

Bodys Protection way to strip parts of paint, rust and dirt. Reusable Coverall gives A water trap is included to prevent complete body protection condensation from your compressor from head to toe. Wear over Y991 Large Cabinet £488.17 clogging the grit. Put on your face shield clothes to catch muck and and respirator and you areready to start dust, also brilliant when As Y990 blast cabinet but 58 x 58 x 91cm blasting. Requires minimumsupply of decorating with protective wide so you can blast even bigger parts 8 c.f.m. F.A.D. Pressure range 15 to hood to collect drips. and panels. 100 p.s.i. Maximum grit size 0.7mm. Order line: 01706 658 619 Blasting CLEANING 45

What is Soda Blasting? Soda Blasting It is a method of abrasive blasting that uses baking soda as the media. Soda blasting leaves a metal surfaceas clean as new. There is no damage from heat warping as with abrasive blasting, but you have a smooth surface to work from. No danger or mess from chemical strippers and no hard labour from hand sanding.

• Safe to use on metal, glass, chrome, fibreglass, rubber and trim Common Uses for Soda Blasting • Removes paint without damaging or warping metal • Parts cleaning and degreasing • Leaves a protective film that wards off flash rust for up to 3 weeks • Fire damage restoration • Does not require masking-off glass or chrome • Mould remediation • Environmentally friendly way to blast • Graffiti removal • Cleans up easily with a garden hose. • Cleaning masonry

Y11737 Dual Tank Blaster – Pressure and Soda Blaster £387.06 Two Blasters in One - Soda and Media! You Can Now Select and Combine Soda and Abrasive Media to Suit the Job • Switch between soda and abrasive in seconds or mix at an infinite ratio between the two medias Y50095 Soda Blaster £195.00 • The exclusive mixing valve allows on Y11807 XLarge Soda Media the fly mixing or selection between £32.00 (25 kilos) the two abrasives and allows you to cut blasting times in half Damage Free Stripping • Use soda media to remove coatings Our toploading blaster takes about 40 kilos on delicate substrates such as From heavy rust removal ... of baking soda. Blast using high capacity fibreglass, chrome, stainless, etc 1/2” dia, 8ft long hose fitted with a deadman • Blast through heavy scale, rust or multiple handle. Change valve over to convert to grit coatings by quickly switching to abrasives blasting. Comes with pressure gauge, four such as crushed glass, glass bead, nozzles and instructions. Requires 7cfm at aluminium oxide, etc 80 to 100psi. • This machine is a must for the serious restorer.

... to gentle paint removal ...

... all at a twist of a valve! Y999 Ground Glass Media £13.95 (25 kilos)

Y11807 XLarge Soda Media s £32.00 (25 kilos) BY993 Aluminium Oxide £30.13 (12k) Y110 Expendable Grit £10.55 BY995 Glass Beads £30.13 (12k) (25kg) Size 0.7mm Blast Cabinet Media Expendable Media Tough general purpose media for removal of all surface Ground glass is very clean and non dusty contaminants on most metals leaving a clean and slightly it removes Carbon, Rust and Paint. Can be roughened finish. For more delicate surfaces and for used several times. Cleans woodwork, wherever a smoother finish is required, glass beads will metalwork and concrete. Size 0.5 to 0.7mm. clean with a peening action. 46 INTERIOR TRIM Order online: www.frost.co.uk

VINYL and LEATHER REPAIR KITS U460 VHT Vinyl Dye £8.68 (325ml) State Colour: Black or Light Grey

Penetrating Colour Dye One-step dyeing process that restores or changes the colour of any vinyl upholstery, seats and trim, Interior Coat U400 Vinyl and Leather Repair or “short nap” carpeting. U220 Aerosol £14.81 (400ml) • Ideal for use on stiff or pliable Kit £11.23 U225 (1 Litre) £29.62 vinyl, simulated leather or plastic U405 Fabric Repair Kit £11.23 State colour: Biscuit, Black, Navy Blue, Off White and Red • Extremely resistant to cracking or fading. U230 Plastikleen £6.13 (250ml) Cheaper and Quicker Warning: Careful cleaning preparation than Replacing or U235 Plasticprep £7.15 (250ml) is essential. The dye is not suitable for Colour Match – Send 2”x3” sample use on cloth or fabrics. Retrimming At some time everyone experiences U227 Aerosol £32.68 (400ml) More Products in the Painting section. U226 £46.98 (1 Litre) minor interior damage – a small cut or burn on seats or dashboard. These kits Breathe new life into scratched, scored repair such damage without the need or chipped surfaces, matching the original U200 Antiquax £6.13 for special tools or skills. They contain colour or even changing it. The coating (200ml) all you need to mix the colour of your actually penetrates the surface and choice, apply the adhesives, and even changes the pigmentation. When finished The Aristocrat match the grain pattern to your original. the grain of the vinyl or leather is intact, it does not crack or peel. Afterwards, leather of Polishes can be fed with hidefood and will retain Antiquax leather cream its natural aroma. Preparation is simple. protects, feeds and • Remove dirt, grease and silicones with polishes leather. You Plastikleen can use it on leather • Remove paint or lacquer with Plasticprep seats, trim panels, • Spray Interior Coat, Liquid Plastic, for dashboards etc. Then, permanent, colourfast and weatherproof use it on your luggage, transformation. furniture and shoes!

R120 Steering Wheel Repair Kit Contact Adhesive U185 Spray Adhesive £66.00 U190 Standard £13.28 (1 Litre) £9.70 (500ml) U191 High Temp £14.81 (1 Litre) With instructions written by experts, this • Bond trim fabrics, kit includes useful techniques to restore Specifi cally designed headlinings, floor carpets, other hard-to-repair items such as dash for auto trim and and vinyls to foam, metal, and gear knobs, radio buttons and other bonding sound wood, etc interior parts. deadening materials • Adjustable nozzle for wide to door, roof, bonnet or narrow spray patterns. and boot panels. With good heat resistance, it is easily applied by brush. It will bond leather, cloth and fabrics to hard-board, primed and painted metal.

Hook and Loop Tape (per metre) Double Sided Tape (10m) S465 SuperGlue £5.62 K410 £3.75 (25mm wide) S500 12mm wide £8.17 K415 £4.25 (50mm wide) S502 25mm wide £9.70 Bonds in Seconds Attach carpet, headlining, trim and seat Bond metal, rubber, plastics Hold mouldings, decals, emblems and trims covers with self adhesive backed hook and and ceramics in seconds with in place with double sided tape. Good loop tape. Makes fabrics easily removable Extra SuperGlue. 20grams. resistance to oil, solvents, vibration and and replaced. Stops carpets slipping. weather extremes (80°C). Supplied in multiples of 1m. Order line: 01706 658 619 INTERIOR TRIM 47

12117 Eastwood Thermo-Coustic Sound Deadener Material £99.50 Banish Road Noise, Floor Pan Vibration and Exhaust Heat Our Thermo-Coustic Barrier can be shaped easily to interior and door panels, with a hitack adhesive to let you install them securely – (even up underneath a boot lid). The sound deadening sheets are designed with a .060” thick layer of butyl rubber material, bonded to a high-performance N280 Plain Felt £10.21 aluminium facing, for an overall thickness of N285 Latex Felt £12.77 0.063”. For more complete coverage, order two kits (particularly if you have removed the factory sound Sound Deadening Felt deadening during restoration). Nine pieces per kit. Each piece is 30” long, 18” wide and 0.063” thick. Traditional quality sound reduction with plain and latex felt. When stuck under the bonnet, boot or interior of your car or van (each) N275 Sound Deadening Pad £6.13 s you can tell the difference immediately. Rattles and vibration become a thing of the past. The latex version (coated one Reduce Noise and Vibration side) resists splashing from petrol or oil Instantly reduce annoying noise and vibration. so theyare ideal for the engine bay. Simply stick these heavy duty rubberised adhesive Supplied in 91cm x 137cm sheets. pads to door panels, floor pans wherever you need We also supply an adhesive for the to reducenoise and rattles and vibration. felt with a good heat resistance. Tried and trusted for years. 200 x 500mm. See opposite page U185, U190.

U415 Flock Colour Trim Kit £18.50 U416 Extra Flock £10.75 (300ml) State colour: Aquamarine, Black, Oxford Blue, Coffee, Dark Green, Demerara, Emerald Green, Nightshade, Post Office Red, Tan, Grey. Tan Coffee Demerara Nightshade Renew the Flock Finish Flocking is the velvet-like fi nish which can be applied to any solid surface, metals, wood, plastic, textiles and fabrics. Often used for glove boxes, door cavities, tool trays, fascias etc. Paint on the adhesive and “puff” the flock on. Emerald Green Dark Green Aquamarine Oxford Blue After drying, brush off the excess to give that original look. Today’s modern flock is made from hardwearing, long lasting nylonand gives a very professional finish. Contains 300ml of flock, enough to cover 1sq metre.

Also available online: Extra Flock and Flock Adhesive Black Post Office Red Grey

U470 U471 U470 Top Boot Seal £4.09 (1 metre) U471 Side Seal £4.09 (1 metre) U472 Capping Seal £3.57 (1 metre)

Seal Out Squeeks and Moisture Stop water and draughts getting into the boot, lockers and doors, by replacing those U472 U473 worn out seals. What about the looks? How often do you see a smart paint job spoilt by torn, twisted and tatty rubber? Such a small job to make a big difference.

U473 Self Adhesive Seal £5.62 (per metre)

Keep dry and draft free. The soft sponge rubber seal is 18mm high and will crush down to a minimum 5mm when trapped. Peel off the plastic backing strip and stick to clean, grease free paint. 48 INTERIOR TRIM Order online: www.frost.co.uk

U105 Hog Ring Pliers £32.68 U110 Hog Rings £3.06 (1/4lb) V420 Air Dry £11.74 (approx 100) U360 Durable Dot Set £30.64 U365 Extra Dots and Fasteners Great Solution for In- Anchor Seat Material £11.23 (set of 25) Car Moisture Control Hog rings are those large looped staples that attach your seat cover to the metal Air Dry ensures that the interior of the Press Stud Replacement vehicle is kept dry, with no rust, electrical frame. Installing new ones is virtually damage, mildew, mould stains or mouldy impossible without these special pliers that Replace those durable dot fasteners (press smells. Also prevent windows from have grooved jaws to grip the hog ring, studs), around the edge of a convertible steaming up. Lasts approx 3 months before an angled head for an easy working angle, roof or tonneau cover with this little tool. needing regeneration on a radiator. Suitable and a closing spring to keep hold of the You can replace both male and female for other applications such as saddle ring should you have to put the pliers halves in minutes. All you need to add is a rooms, gun safes, storage spaces etc. down for a moment. hammer to strike the riveting blow. Comes complete with 25 chrome durable dots.

U140 Hog Ring Stapler £29.62 U141 Galvanised Hog Ring Strips £3.57 (500 rings) U125 Five Piece Auto Tool Set £15.32 Strip Feed for Hog Rings Complete with automatic feed, which Tough Enough to Pry – makes them ideal for continuous U300 Automatic Sewing Awl But Not Hard Enough connections. The preformed strips of 50 £12.26 hog rings (Size 07) not included, feed easily to Damage (approx 14m) into the tool making it ideal for re- U305 Wax Thread £3.57 State colour: black, brown, tan • Wedge Puller Tool upholstery of classic cars, plus numerous • Wide Angled Pry Bar other uses from fencing to sealing bags. U302 Spare Bobbins £2.04 • Flat Pry Bar Ring size closes from 17.4mm to 7mm. • Wide Scraper Sew Leather and Vinyl • General Purpose Wedge A set of tools ideal for both automotive and U121 The perfect compromise between machine general use. Making many jobs easier and Trim Removal and hand sewing for stitching in heavier quicker. Suitable for removal / installation Tools £7.66 materials such as car seats, convertible of both internal and external trim dash and tops, carpet edges, etc. Comes complete fittings, removing grommets, separating You can now remove with straight needle, curved needle, one parts, removing stickers and labels etc. interior panel clips reel of waxed tan thread, and instructions and fasteners without for use. Now you can make effective breaking them, making repairs without removing materials from your rebuild quicker and easier. your car.

U495 Number Plate U150 Revolving Head Hole Punch Pads £3.57 £6.13 (Pack of 12) Makes the Neatest of Jobs Ensure your 3mm Rubber Matting (per metre) plates stay fixed U430 Wide £12.26 (1m wide) Make a neat job of small holes in leather, with these high U431 Fine £14.30 (1.22m wide) fabric and vinyls from 2mm to 5mm. tack white foam pads. Very high shear Ideal for installing eyelet, fasteners etc. strength. Also can be used to affix badges. Cover interior floor, boot, and running boards Also Available: U100 Upholsterer’s Pliers £33.60 Size 80 x 25mm. with durable rubber matting. Order line: 01706 658 619 EXTERIOR TRIM 49

Tomax Lift Spot Turnbuckle

Hood and Tonneau Fittings P160 Stripemaster Kit £50.55 K190 Magnetic Guide £16.34 Tomax Fastener U500 Spring Loaded Button and Washer £15.83 (10) Personalise Your Vehicle U501 Woodscrew Stud £5.62 (10) Put real coach painted stripes along your U502 M5 Stud 10 mm Long £5.62 (10) classic. Flames on custom cars. Accent U503 Stud with 2 Hole Fixing £6.13 (10) door handles or aerials. White stripe tyres. U504 Tomax Key £0.52 Personalise your helmet. Your imagination Lift Spot Fastener is the only limit. You can use different U510 Spot Fastener and Clinch Plate £5.11 (10) combinations of wheel and spacer to U511 Stud with 2 Hole Fixing £6.13 (10) achieve any of eight possible stripe (10) effects. Single or double lines. Stripe with U512 M5 Stud 10mm Long £5.62 paint, lacquer, enamel, latex or glue. U513 Woodscrew Stud £5.62 (10) A guide is attached to the head for U514 Self tapping Stud £4.60 (10) following body lines or a flexible magnetic U515 Spot 4 Prong Hole Cutter £79.00 strip. The Magnetic strip is really handy if Turnbuckle Fastener there are no creases in the body work to U520 Eyelet and Clinch Plate £3.06 (10) act as guides. Also useful for marking cut (10) lines when fabricating body parts or U521 Turnbuckle with 2 Fixing Holes £5.00 holding paper templates. U522 Turnbuckle 4 Prong Hole Cutter £79.00 More Fasteners see Consumables Section

Renovo Ultra Proofer U217 £23.49 (1 Litre) U218 £14.30 (500ml)

K430 Pin-Striping Tape £12.77 Make Your Soft Top Like NEW Waterproofs Canvas, Duck, Mohair as well as Pin Stripes Made Easy Boat Covers and Caravan Awnings

A really simple way of producing perfect Re-establishes the original waterproof weather barrier and keeps coach lines. Stick on the 25mm wide tape the Soft Top Reviver colour looking fresh. Contains UV inhibitor where you want to pinstripe, remove the and is mould and mildew resistant. Brush on, leave for 3 hours pre-scored sections to suit your own and your fabric soft top will be water and stain repellent. design and you are ready to paint. Waterproofs canvas, duck, mohair as well as boat covers Lays flat to prevent bleeding. and caravan awnings. At 14 metres long will do one vehicle. More Renovo Products see Car Care Section

F950 Door Adjuster Kit £19.91 Get the Gaps

Comprising of a Laser Cut Gap Gauge, 10” Straight and Angled Pry Bars. M990 Wiper Arm Remover £11.23 These large levers give minimal damage when Puller has a cast housing with a ball- prying doors, bonnet or ended thrust bolt for the fast and safe boot. The gap gauge removal of splined and taper mounted makes it easy to confirm windscreen wiper arms. a consistent gap. 50 PAINTING Order online: www.frost.co.uk

Stop Rust Permanently POR 15 Kits with POR-15 Solutions?

P268 Chassis Painting Kit £34.72 P265 Six Pack Rust Preventive Paint Kit £36.50 This neat kit allows the progressive painting of the chassis and running Get maximum convenience and components without waste. Includes efficiency with 6 x 118ml cans of POR-15 3 x 118ml cans of Black POR-15 Rust Rust preventative paint. You only open Preventative Paint and 3 x 118ml cans small amounts, as you need them, so of Chassis Coat Black. there is no waste. Each can covers 12 square feet. Also Available: P237 POR-Starter Kit See Rust Section State colour: BLACK GREY SILVER

POR-Strip C225 £14.95 (946ml, US Quart) C230 £31.62 (3.78 litres, US Gallon)

Remove Any Coating from Any Surface Does not damage glass, chrome, aluminium or factory fibreglass. The chemical resistant spray bottle provided means that you use s less and finish faster than brushing. P115 Manifold Grey £20.95 (473ml) P750 Tie Coat Primer £23.95 P116 POR-20 Aluminium £21.00 (946ml, US Quart) P810 £22.50 (473ml, US Pint) (473ml) P814 £35.95 (946ml, US Quart) P117 Black Velvet £19.91 (473ml) Paint it Straight On! Prime and paint right over cured Self Etch Primer POR-15 with this special “interlocking” Ideal way for painting primer, without any need to rough up over cured POR15, or de-gloss. making the perfect • Tough yet sandable single component surface for bonding Manifold polyurethane primer, with special with the paint of your Paints adhesion characteristics choice, any colour Guaranteed up to 760ºC without peeling • Perfect for most painted surfaces or type. The primer or flaking. Can even be used on turbo • Highly resistant to penetrating is used as a bonding chargers. Factory Manifold Grey and topcoats, like lacquers, enamels, two- coat, for high build POR-20 Brilliant Aluminium high temper- components finishes primer/ filler ature coatings correctly applied, will • Sands very smoothly. applications use maintain their rich colour without burning P750 Tie-Coat. Note: Not suitable with cellulose paints. off or discolouring. Black Velvet is guaranteed up to 650ºC. These coatings are extremely resistant to the weather including salt and moisture. 2 thin coats Metal Mask are recommended; the first is air dried the P700 £16.50 (236ml) second is cured at 150ºC either in an oven P705 £22.50 (473ml, US Pint) or by the engine. Can be brushed or sprayed. Use P238 POR15 Solvent to thin. Cast Iron Paint Close to the colour of brand new cast iron or bare steel. Extremely tough, very chip and scratch resistant, it is the More POR15 Products online perfect coating for high stress bracketry. It is tough yet flexible Use keyword: (POR15) and is perfect for areas where enamel paint is sure to flake. Order line: 01706 658 619 PAINTING 51

Before After

Blackcote POR15 Rust Preventative Paint P400 £22.00 (473ml, US Pint) P230 £21.50 (473ml, US Pint) P235 £33.50 (946ml, US Quart) P405 £35.40 (946ml, US Quart)

Stirling Silver Stop Rust Permanently State colour: BLACK GREY SILVER CLEAR P410 £21.45 (473ml, US Pint) No other paint is as permanent as POR15. When others have chipped, scratched, (946ml, US Quart) P415 £33.70 flaked, and peeled, POR15 will still be preventing rust. Treat smooth surfaces first with S205 Metal Ready. Quart covers nine square metres. Use Over POR15 for • Can be sprayed or brushed (Use P238 Solvent to thin and clean brushes). Permanent Protection • Prevents rust from recurring by protecting metal from further exposure to moisture For the toughest, most permanent protection • Designed for application directly on rusted or seasoned metal surfaces against rust and corrosion. • Dries to an incredible rock-hard, non-porous finish that won’t chip, crack, or peel • Non porous and will not crack, chip, or peel (dries faster in humid conditions) • Amazing scratch and abrasion resistance • UV light sensitive (must be topcoated for prolonged exposure to sunlight). • Not sensitive to UV light • Totally resistant to most acid, petrol and road salt • Can be applied over POR-15 or other paints. Note: Follow instructions on label carefully. A thicker version of POR-15 Blackcote gives a glossy black finish. paint is available: POR Patch (see Fillers section for details). Stirling Silver gives a high lustre silver finish. APPLICATIONS Suspension – chassis – doors – trunk areas – engine and fuel tanks – rusty frames – floor pans – farm equipment – marine equipment, or even a heavily corroded battery tray. Excellent for sealing and repairing fibreglass.

P238 POR15 Solvent £12.95 (946ml, US Quart)

P300 Engine Enamel £20.95 P600 Glisten PC c/w Hardener (473ml, US Pint) Activator £42.30 (767ml) S440 AP120 Metal Prep The best engine enamel £11.27 (590ml) paints! Why? Because they contain 80% solid A glossy, rock hard, non porous, perfectly pigment, and therefore less solvent to clear brilliant top-coat for all metal evaporate into thin air, so providing a deeper, surfaces including highly polished richer colour. They glide on easily without aluminium and chrome. This two part leaving streaky brush marks. Good for 150°C. coating won’t chip, peel or fade anddries Aluminium, rusty and smooth surfaces should State colour: without brush marks. For best results use be etched. Treat first with AP120 Metal Prep when painting onto S205 Prep & Ready (Metal Ready) FORD MEDIUM BLUE OLDS GOLD FORD RED CHEVY ORANGE reactive metals such as aluminium, (see Tank section). One pint is copper and brass. enough to do a whole engine. ALUMINIUM BLACK BUICK GREEN CHRYSLER BLUE FORD BLUE FORD GREEN

P1000 Hardnose Paint £42.36 (946ml, US Quart) Chassis Coat Black P1001 Whitecote £42.36 (946ml, US Quart) P500 £23.40 (473ml, US Pint) P505 £35.24 (946ml, US Quart) Stop Worrying About Stone Chips Top coat applied over POR-15 rust and Gravel Roads prevention coating giving the Paint on your chassis or frame and stop worrying about toughest, permanent stone chips and gravel roads protection. Highly • Glossy, two-component coatings for use over primed or painted flexible, extremely surfaces scratch and chip • Rock-hard, chemical resistant, non-porous, and incredibly tough when fully cured resistant and • Exposure to moisture and humidity improve their performance and strength strengthened by • Withstand even the most intensive UV environments State colour: exposure to moisture. • Durable and easily cleaned Not sensitive to • Do not crack, chip, peel, or fade with age. BLACK BLUE GREY RED YELLOW UV light. 52 PAINTING Order online: www.frost.co.uk SPECIALITY COATINGS Up! Everything the Frame From For Eastwood has the coatings you need to Do The Job Right! Order line: 01706 658 619 PAINTING 53

11756 Brake Gray £17.36 (368g)

Brake Fluid Resistant Paint Heavy-duty coating containing pure stainless steel pigment in an ultra durable epoxy ester resin. Resistant to DOT 3 brake fluid. Withstands temperatures up to 200°C. Excellent corrosion resistance. Can also be GREY/WHITE BLACK/AQUA BLACK /GREY applied on to metal, ceramics, wood and Trunk Paints leather. For use on master cylinders, disc brake callipers, brake drums, 10007 Grey/ White £10.72 (340g) spindles, mounting brackets and hardware. 10008 Black/Aqua £10.72 (340g) Same colour as Eastwood’s Detail Gray. 10009 Black/Grey £10.72 (340g)

Original Spatter-Colour Match original multi-colour spatter finishes with this trunk paint. Handy aerosol can eliminates spray gun clean up. Use a primer first over bare metal. Must be sealed with 10196 Clear Coat Gloss Finish for Bare Metal Surfaces.

10280 Clear Zinc £12.26 (340g) 10281 Zinc Phosphate £12.26 (340g) Underhood Black Semi-Gloss 10020 Silver Cad £13.28 (340g) Original Equipment Look 10024 Aerosol £13.79 (340g) 10045 £19.91 (946ml, US Quart) Clear Zinc The Look of Silver duplicates the Cad Plating Factory Black blue/grey OEM plating used on disc Specially formulated to faithfully recreate Use on radiator supports, inner wing walls, brake dust shields, the bluish silver tint of original cadmium jack bases, under bonnet brackets, and coil brackets, plating. Perfect for coil clamps, alternator many other parts. Just clean, degrease, pulleys, alternator pulleys, carburettor and transmission and prepare parts well, then spray on fans, vacuum linkage rods. Fast drying acrylic lacquer for a “factory-like” appearance. Satin- advance canisters, withstands up to 120°C. Covers up to smooth finish does not hide casing details. relays, hose clamps, 6 sq. feet. Withstands temperatures up to 120°C. brake/ fuel clamps and misc. brackets. Zinc Phosphate duplicates the OEM Charcoal Grey plating. Use 10041 PRE Painting Prep to remove residual grease and oil before coating. Aerosol enamel formulation. Temp. Resistant to 150°C. Covers up to 6 sq. feet.

Radiator Black Paint 10040 Gloss £12.26 (340g) s s 10340 Satin £12.26 (340g) 10020 Silver Exhaust 10030 Tank Tone™ Metallic Paint £10.72 (283g) Coating £13.28 (368g) Heat-resistant paint specially formulated Easy-to-apply aerosol for exhaust com- for your radiator – won’t Zinc Tank Protection ponents from the manifolds or headers peel, interfere with the heat Contains Zinc to protect your tank from back. Great for hangers and tailpipes. transfer or block airfl ow. rust. Many tanks come from the factory An aluminium-coloured coating that Withstands 120°C, also with a similar coating. Remove all paint withstands high temperatures (150°C). suitable for heater cores. and undercoating from the tank before Covers 6 sq. feet, silicone enamel, One can covers about application. Works well over minor surface 25% gloss. 6 sq. feet. rust and helps stop it’s spread. Two cans NOTE: Not recommended for catalytic cover the average tank. Withstands converters, manifolds, headers or head pipes. temperatures up to 150°C. 54 PAINTING Order online: www.frost.co.uk

Satin Black Silver

Carb Renew ll 12867 Bronze £12.00 (141g) 12868 Silver £12.00 (141g)

Stainless Steel Grey Factory Grey Restore the OEM Look of Any Carburettor! Newly reformulated Carb Renew 2 has High-Temp Coating Spray (333g) better fuel resistance and durability than the original formula, but still maintains 10393 Satin Black £15.32 10396 Silver £15.32 that factory silver/bronze look. It is a 10394 Stainless Steel Grey £15.32 10395 Factory Grey £15.32 translucent acrylic enamel which is resistant to fuel and most additives. Long Lasting Protection Withstands temperatures up to 150°C. One aerosol covers about 2 sq. feet. High-temp coatings (up to 650°C) and long-lasting protection for manifolds and headers. Perfect for competition restoration or all out customisation. Apply at home – no worries about parts being damaged or lost in shipment. Cures to click on: a hard and durable finish which will last for years. One can is sufficient to coat two www.frost.co.uk standard cast iron manifolds (about 2 sq.ft). Two cans recommended for header systems. for more products and web exclusive offers

Essential to Preserve That “Brand New” Look! Duplicate the original look of many metal parts on your car with these specially formulated detail paints. Protected up to 120°C by these acrylic lacquer paints, metal parts keep that brand new look for years. Available in aerosols and quarts. (Quarts offer greater value! Thin 10-20% with Lacquer Thinner or Xylene before spraying.) Each aerosol covers approx. 6 sq.ft.– quarts approx. 50 sq. feet. Natural low 4-15% gloss.

Designed to be Sprayed Detail Gray™ Aluma Blast™ Spray Gray™ 10036 £11.74 (368g) 10109 £11.74 (340g) 10032 £11.74 (340g) 10046 £26.04 (946ml, US Quart) 10048 £26.04 (946ml, US Quart) 10065 £26.04 (946ml, US Quart)

Detail Gray™ For stamped or machined Aluma Blast™ Provides protection and Spray Gray™ Protects cast iron parts steel, rough cast aluminium, pot metal durable finish for smooth-cast aluminium and maintains their fresh-cast factory and die-cast parts like alternator and components. Great on intake manifolds appearance. Perfect on water pumps, distributor housings. and transmission housings. master cylinders, and more. Order line: 01706 658 619 PAINTING 55

Eastwood Clear Coat Why Two Different Chassis Blacks? A “clear coat” adds a layer of UV Extreme is the best one: it has 3x resins of traditional coatings and tough enough resistance, abrasion protection and for any undercar component. Original is ideal for the value conscious enthusiast restores some brilliance and colour who want that factory fresh look and stay within a budget. intensity to faded surfaces. One Aerosol covers about 6 sq. feet or 2 to 4 wheels. NOTE: May slightly dull polished metal surfaces.

Extreme Chassis Black Original Chassis Black 11172 High Gloss £18.89 (397g) 10000 Gloss £13.28 (397g) s 11173 High Gloss £32.50 10354 Gloss £29.50 (946ml, US Quart) (946ml, US Quart) 10025 Satin £13.28 (397g) 10200 Gloss Finish for 11175 Black Satin £18.89 (397g) 10043 Satin £29.50 (946ml, US Quart) Bare Metal 11176 Black Satin £32.50 Designed to resist chips, salt, and mud Surfaces (946ml, US Quart) £12.26 (312g) corrosion. Works very well over bare • Maximum durability epoxy formulation metal or 16015 Rust Formulated to seal clean • Improved brake fluid, fuel, Encapsulator. Correct colour bare metal surfaces. solvent chip and scratch tone for all parts of the Youmay also use over plated resistance. suspension and frame. finishes to enhance corrosion For improved Withstands up resistance. Withstands temps adhesion to 150°C. UV up to 150°C. prime clean resistant. Gloss bare metal produces an 80% with 11193 Gloss and Satin 10196 Gloss Finish for Extreme an 60-70% gloss. Painted Surfaces Chassis Black £12.26 (312g) Primer. Can Not recommended with Self-Etch Primer. be recoated at any time without lifting. Ideal to topcoat most cured Not recommended with Self-Etch Primer. painted surfaces – such as More Eastwood Products online urethanes, metallics, lacquers Use keyword: (Eastwood) and enamels – without mottling 11193 Primer £13.28 (420g) orlifting. Withstands temps up 11194 Primer £27.50 (946ml, US Quart) to 120°C. Promotes better adhesion and durability on clean bare metal surfaces. This epoxy-fortified primer is the perfect foundation for Extreme Chassis Black.

29894 Eastwood Extreme High

Temperature Clear Coat s £50.04 (236ml) 10331 Golden Cad System £39.83 (3 x 340g) The ultimate clear coat that resists brake fluid, Replicate the Look hot fuel and protects most surfaces. of Cadmium • Perfect on intakes Easy 3 step paint process can be used on manifolds, engine virtually any metal part while also providing blocks and wheels longlasting rust protection. Includes Gold • Chemically resistant Base Coat, Red Zinc and Green Zinc Aerosols • Withstand high temperatures – enough to cover 6 sq. feet. First, coat entire • Superior UV protection surface with Gold Base Coat, then apply random highlight of Red Zinc and finish • Great chip/scratch resistance with Green Zinc. Use 10196 Eastwood Clear Coat Gloss Finish for painted surfaces • Compatible with UV sensitive plastics, for enhanced appearance and durability. Max temp. 121°C. For best results prime bare metal and most paints rusty metal surfaces with 16015 Rust Encapsulator, prime clean bare metal surfaces • 180ml covers 4 wheels. with 16014 Self Etching Primer. 56 PAINTING Order online: www.frost.co.uk

Grey Self-Etch Primer 16014 Aerosol £15.32 (453g) 16009 £19.91 (946ml, US Quart) Etch and Prime s in One Step Etches and primes bare, rust-free metal in one step. Save time, adheres to steel, aluminum, stainless and scuffed galvanized steels. Compatible 10178 High-Temp Stainless with virtually any paint or auto finish. (475ml) Bonds better to bare metals than Coating £25.02 other aerosol primers. Note: NOT for use under 10025 Chassis Black Manifold Protection This grey coating offers superior manifold protection. Thoroughly clean the manifold, brush on, allow to dry. Once installed, run the motor in a well ventilated area for 20 minutes. The cured coating resist temperatures up to 650°C. Lasts for years. Shelf life is one year. Keeps manifolds and headers looking new. One tin contains enough to coat up to 5 cast iron manifolds. PRE Paint Prep 10041 Aerosol £12.26 (312g) 12849 £22.46 (946ml, US Quart) 10194 £15.32 (946ml, US Quart) 12850 £57.00 (3.78L, US Gallon) The Final Step in Powder Coat and Surface Preperation! Paint Dislover Removes dirt, wax, polish, grease, Environmentally friendly coating remover. silicone, buffing compound, even road Simply immerse parts to be treated in the tar-ensuring a clean surface prior to Dissolver and remove a few minutes later painting. Follow with 16014 Self-echting when coating changes colour, then rinse Primer for best results. off with cold running water. Re-usable.

s 10001 Argent Silver 31130 Under Gone P260 Glyptal £34.80 (946ml) Wheel Paint £10.72 (340g) Remover £12.26 (480g) Match OE With This! Glyptal Improves Oil Undercoat Removal Has the correct tone, sheen, and Circulation Made Easy appearance of many original wheels. Seals the tiny pores left in metal after bead Quick, easy and safe removal of under- Appropriate for styled steel wheels, blasting and leaves the engine block coats. Works by loosening the bond of the especially the muscle era cars. High solids interiors smooth. Helps keep oil clean and under-coat to the base metal, allowing you content goes far; One can covers 2 or 3 flowing freely. Acid and oil resistant. to scrape it off, leaves surface paint ready. wheels, depending on application. Resists Perfect for sealing porous aluminium Not for use with urethane epoxy or bake on undercoating. temperatures up to 120°C. castings. Order line: 01706 658 619 PAINTING 57

Wrinkle Finish (310ml) P110 Black £9.70 P111 Red £9.70 Reproduce Crackle Finish Many older interiors and components were finished with a wrinkle, or crackle, effect paint. Now you can P320 Calliper Painting reproduce the same finish Kit £35.00 in a few hours from an aerosol spray can. Dress Up Your Callipers! Great for early M.G. dashboards, electrical components, old Calliper Paint (310ml) Nothing ruins the appearance of a smart radio cabinets, trim pieces, P101 Bright Blue £9.70 set of wheels like dirty, corroded callipers Blue gauges, etc. No primer P102 Satin Black £9.70 lurking from behind. Dress up steel or required. aluminium callipers with a tough, durable P103 Aluminium £9.70 Black P107 Gold £9.70 finish that will make your car look terrific. Aluminium Strong enough to withstand road debris P100 Satin Black Barrel P108 Red £9.70 and temperature extremes. When dirty, P109 Yellow £9.70 Gold Paint £9.70 (310ml) clean them with anything you like; the paint will stand up to most things. Contains: Excellent Red Calliper Cleaner, Calliper Prep, POR-15 Rust Smart Barrels Whatever the Yellow Preventive Paint, Calliper Paint, Masking Custom formulated to Tape, Gloves, Foam Brushes, instructions. restore motorcycle engines Conditions State colour: to their original factory • High Temperature Brake Drum, Black Red Silver appearance. It is extremely Calliper and Rotor Paint (482ºc resistant to oil, gasoline Chemical resistant coating) and solvents and heat • Excellent durability and weather S640 Rubberized Under Coating resistant to 260°C. resistance Spray £15.90 (502ml) Virtually stops rust and • Ideal for custom corrosion while resisting detailing your vehicle. chipping, cracking Excellent Moisture and fading. Barrier

Flexible, paintable, black s coating. Protects against P251 Plate Finish £9.70 (310ml) moisture, dust, heat and cold. Creates an effective barrier that For Damaged Reflective Surfaces reduces vibration and deadens This look alike chrome spray is ideal for damaged reflective surfaces. sound in wheel wells and wings. Use on clean rust- free metal. • Adheres to both painted and unpainted surfaces • Resists salt and chipping

• Protects against dust s penetration and exhaust fumes. P800 Engine Enamel • May be used to insulate against £19.91 (500ml) engine and exhaust noise. Long Lasting s P140 Black Chassis Paint British Engine £14.30 (1 Litre) Colour Our range of quality Engine Protect Your Chassis Enamels by Classic Transport Coatings are heat and oil with the Classic Finish resistant to give long lasting Quality and strong protection for suspension, steering axles and all British engine colours. other under body components that risk damage in every day use. Used by vehicle builders and restorers. Oil resistant, 1 litre covers State colour: approx 12sq. metres. Can be brushed on or sprayed if thinned. Aluminium Black BMC Green Ford Dark Blue Ford Green Ford Red Apply to a clean dry surface with a primer if applying to new or bare metal. Thin with white spirit. Land Rover Blue Metallic Green Gold MG Maroon Pale Blue Pastel Green Yellow 58 PAINTING Order online: www.frost.co.uk s

51603 Eastwood Concours HVLP Paint Gun £132.26 51559 Digital Air Regulator £29.00 (1/4”) Pro Spray Gun Maintain Line Pressure The professional quality Concours Paint with Accuracy HVLP, gravity fed, paint gun is built with a lightweight aluminium body for comfort, Eastwood's digital air regulator is a reliability and years of service. With a lightweight and compact unit that makes it working pressure of 29 psi and requiring easy to adjust and maintain line pressure only 4 cfm, it is ideal for the professional with accuracy. The digital gauge is easy to and the serious enthusiast. The needle/ read and accurate to 1.0 psi. The battery- nozzle andpassages are constructed of saving internal motion sensor automatically stainless steel making it compatible with shuts off the gauge when not in use. both solvent and waterborne coatings. Ideal for the control of paint spray guns This gun is a workhorse that will give you and the Hot Coat Powder Coating guns. years of reliable service. Kit contains: The aluminum bodied regulator features a Concours Gun with 1.2mm tip for 0-160 psi gauge, locking adjustment knob basecoats and 1.4mm tip for clearcoats, and one male and one female ¼" NPT Tefl on coated 600cc metal cup, 600cc connectors. plastic cup, tool kit, and instructions.

S445 Black Stone Chip Protection £11.23 (500ml) P710 Apollo Spray Mate £144.51 Sick of Stone Spraying Made Easy Chips! High volume low-pressure compact spray Front valances and under set-up. More economical than conventional wings are always subject to spray methods. The system gives a stone chips, give long term contained operation, which is directional protection by spraying Stone with little or no over spray. Chip. Comes in black but can • Complete plug in and go system (1100w be painted over. Adheres 2 stage turbine, 3 metres of flexible hose to most metals giving long and a spray gun) lasting corrosion resistance. • Ideal for workshop and home use • Suitable for spraying a variety of finishes, cellulose, emulsion, gloss, lacquers, P270 Grey Primer £4.60 (500ml) s timber preservatives and varnishes. P275 Satin Black £4.09 (500ml) S610 Schutz Underseal £5.62 Fast Drying (1 litre) Acrylic Paints Will Make the Repair Grey Primer for use Weathertight on metals, wood and plastic prior to top After welding the underside, make the coating. Satin Black repair weathertight. Spray Schutz to give finish suitable for the original look and protect your car from most applications. the muck of the UK winter. 3 to 4 cans give Exceptional high full underside protection for an average car. N520 Aerosol Rack coverage. Spraying with warm product allows the £5.11 sealer to flow into corners and seams. More Frost Aerosol Spray with S295 Schutz gun. Can be hung on the wall Products online See Rust - Dinitrol section. or left free standing. Use keyword: (Frost Aerosol) Order line: 01706 658 619 PAINTING 59 Perfect for Buffing

V340 G3 Paste Compound £14.97 (1kg)

Can be used by hand or low speed machine on cellulose, acrylics and other plastics including GRP. Enable you to remove small scratches, 1200 grade wet or dry paper marks, dust nibs, overspray, paint runs, orange peel as well as restore old paintwork. 19311 Soft Sanders £22.46 (6 pack) 19318 Super-flex Sandpaper £7.15 (8 pack) V338 G10 Extra Fine Grade Liquid £14.20 (500ml) State grit grade: 60, 80, 100, 120, 150 and 220 grit For use on all modern original and refinish paint systems. Mild abrasive action enhances the gloss and finish, when used after Perfect for Sanding G3 Paste. Cleans and restores discoloured surfaces on older, soft or It is easy to loose the sharpness of style delicate paintwork. Ideal for a high gloss finish on dark colours. lines with a folded up piece of sand paper. Can be used by hand or machine application. Ideal for blowins and These closed cell foam blocks are moulded fade outs. Removes acid rain and overspray. in a wide range of profiles, to fit most detail sanding needs and in 3 different hardness’s. Tapered, round edges prevent gauging D330 G Mop Compounding Pliable and durable. See page 90 for Sanding Board. Head £15.32

General purpose foam applicator with a high cutting action for use with compounds such as G3 Paste and G10 Grade Liquid. Suitable for use on refinishing paint, GRP and composite and Acrylic surfaces. Fitted with 14mm thread and developed specifically for use with water. Soak Head in clean water and squeeze, fit to a polish-ing machine with approx 1800 RPM.

V400 180mm Variable Speed Sander/Polisher £96.00

31160 6 Piece Dura-Block 1200 watt variable speed range (660-3000 Kit £48.00 rpm)suitable for both sanding and polishing. Comes with a reversible handle for left or Ideal for wet and dry sanding. Six-piece right hand use and a spindle lock for pad EVA rubber block set comes in a variety removal. Supplied with hook and loop of lengths and configurations to level a backing pad and polishing mop. Ideal for variety of contours and flat surfaces. use with D330 G mop compounding head. Abrasive papers sold separately.

s D320 Rubber Sanding Block C215 Wet and Dry Assortment K470 Trim Masking Tape £16.50 £5.62 £13.79 (20 pieces) Clever Tape Flexible Sander Sanding Assortment Protect rubber trim and door shuts when spraying. The plastic masking strip slides A flexible rubber block which holds High grade paper providing great results down door gaps, under windscreen abrasive sheets - wet or dry - securely in on metal, paint, plastic, fibreglass and rubbers, door trim etc. to give a clean place during sanding operations. Accepts with most automotive and marine edge. Tape is scored for easy tear off 100mm wide strips. Comfortable contoured materials. Can be used wet to give and flexible to follow curves. grip. The inter-locking grip and base lubrication or dry. Used from coarsest separate completely for very simple and to finest between filing and polishing. Standard Masking Tape (50m) fast abrasive changes. Each sheet 280mm x 230mm. X180 1" £1.53 X182 2" £2.55 60 PAINTING Order online: www.frost.co.uk

Tidy Up Those Paint Jobs

P225 Three Run Blockers £19.91 P224 Run Razor £9.70 P226 Blocker/Razor Set £26.04 J250B Pack 5 Blades £1.04 SAVE £3.57 Gives final touches for a perfect finish, Three differently contoured aluminium shaving down semihardened runs, sags C210 Scuff Pads £4.09 (4) blocks to be used with wet/dry paper to or dust between colour and clear coats. block out runs, sags or dust. They can Holder takes standard razor blades, set also be used for block sanding body filler at a precise angle. Pass gently over the Paint Prep Pads or primer in hard-to reach areas. surface, dialling down the blade position Invaluable cleaning pads, tough on grime Non-compressible alloy ensures a wave- indicatorin. 001” increments until the but soft on surfaces. Ideal for paint free finish. imperfection is gone. preparation. Pack containstwo fine – two ultra fine grades.

LANGKA – The Professional Way to Repair Those Paint Chips

LANGKA, if you can “catch” your fingernail V295 Complete Paint Chip Repair Kit in a scratch or chip, then this is the product £30.13 you need. Clean the area, apply touch-up paint to the chip (not supplied), allow to dry Complete Repair Kit includes and apply generously to the flat surface. Instructions and: Rub over the scratch. Once it begins to • LANGKA “The Blob Eliminator” wear off, rub gently until the excess paint is • Prepaint (2oz) for cleaning prior gone but paint is left inside the scratch. to applying touch up paint • Paint Sealant (2oz) to protect and seal the repair V300 Langka Chip Repair £17.87 • 3 Micro Brushes for applying touch up paint Includes, LANGKA “The Blob Eliminator” • Plastic Squeegee Card (2oz) – enoughto do 20-30 chips, Plastic • 1 Microfibre Cloth for wrapping Squeegee Card and Instructions. around the plastic card. More information available online

C220 Wire Wool Grade 0 £6.13 (450gm) P818 Paint Brush Set £9.70 Also Available: Wire Wool P160 Stripemaster Kit Use for all surface preparation, soldering, Seven Paint Brushes K190 Magnetic Guide painting, leading, blacking and surface Made up with 60% polyester and 40% bristle and fitted K430 Pin-Striping Tape rust removal. with metal ferrules. Sizes include25, 37.5, 50, 62.5, 75, 100mm brushes and a 50mm angle sash and cutting in See Exterior Trim Section brush. Gives good results with all paints. for details Order line: 01706 658 619 POLISHING 61

Achieve that D125 Plastic Polishing Kit £16.85 Brilliant Clean and restore fibreglass car bodies, motorcycle fairings, plastic bumpers, and Shine perspex windscreens with this kit. The roughening and finishing polish bars arealso suitable for tufnol, epoxy resins, Pre-polish and finish aluminium alloys, brass, copper, steel, iron bakelite and celluloid. Contents include and stainless steel with our polishing and abrasive kits. drill arbour, dust mask, roughening and finishing mops and instructions. D204 Abrasive Kit £19.91 (8 pieces)

Kit contains 8 pieces and instructions: 3 off 4”x 1” stitch mops, 3 x 450g Tube abrasive compounds (80 coarse grit, 150 or 180 medium grit, 240 or 300 fine grit), Steel Arbor, Dust Mask. s D202 Polishing Kit £24.00

Kit contains 3x 4”x1” mops (Sisal, White stitch, G Callico quality), 3x180g Bar finishing compound (grey, green, blue), D126 Wheel Polishing Kit £16.34 Steel Arbor, Dust Mask, Vienna Lime Powder, Small Polishing Felt. 10 pieces. Restore corroded or tarnished alloy wheels s to their original condition. Just remove any old lacquer using paint remover, be careful D205 Heavy Duty Polishing D145 6” Polishing Kit £40.34 not to scratch the alloy. A1” wide mop is and Abrasive Kit £50.55 D146 6” Wire Wheel £9.19 used for the wheel face, 1/2” wide mop for rim detail and a cone mop for inside Kit contains D204 and 3 x 4”x1” mops For faster, easier polishing use our recesses. Enough polish is supplied for (Sisal, White stitch, G quality), 3x 180g 3-stage, 6”polishing kit on your bench two sets of wheels. Bar finishing compound (grey, green, grinder. 3 mops, 3 compounds, LH and blue), Vienna Lime Powder, 7 Small RH noses, lime, mask and gloves. Polishing Felts, 1 pair of gloves, (11pieces). Mini Arbor. Learn the Art!

L300 Custom Metal Polishing Book £13.00 L730 Metal Polishing and Buffing DVD £24.60 Detailed guide to all the ins and outs of metal polishing. David A Waldoch’s DVD shows you the tricks of custom It covers wheels, compounds, metal polishing with sections on how to: choose your equipment, preparation and equipment, buffing wheels, compounds, abrasives, tips on polishing brass, steel, basic polishing of aluminium, copper, steel, stainless, aluminium, cast iron and polishing prior to plating, techniques and finally buffing stainless steel. 71 photos those hard to reach areas for a quality job, you’ll be explain tools and techniques proud to show. Colour 52 minutes. clearly. More DVDs in the DVD Section 62 POLISHING Order online: www.frost.co.uk

SPARES and SEPARATES Mops (4”x 1”) D211 White Stitched £5.62 D260 Flitz Polishing D212 Sizal £4.09 Ball £16.01 D213 G Finishing £5.11 Flitz Paste Polish D214 B Finishing £6.64 D265 Paste £14.81 (150g) D215 Coloured £5.11 D270 Liquid £12.77 (225ml) Sizal is fast cutting and aggressive for Abrasive Cup Wheel D275 Flitz Wax Clear Protector ferrous metals. Stitched Mops are for C180 Coarse (75mm) £8.17 £12.77 (250ml) coarse buffing, whilst the “B” Cotton C181 Coarse (50mm) £8.17 Mop is for general finishing and use the C182 Fine (75mm) £8.17 Polishes in Minutes “G” Mop for fine finishing and on soft C183 Fine (50mm) £8.17 metals and plastics. Keep a separate What Otherwise Would mop for each compound. End Brush Take Hours! Mops (6”x 1”) C184 Coarse (25mm) £8.17 Cut your wheel cleaning time in half with D228 Sisal £6.64 C185 Fine (25mm) £8.17 the Flitz Polishing ball tool. Buffs hard to D230 White £6.64 reach areas in seconds. • Works with all drills up to 2000 RPM D231 Callico £6.64 Much Tougher • Buff out scuffs, Oxidation, Tarnish, Satene Abrasives Than Wire Brushes Brake Dust, Pitting, and Corrosion on (450g approx) Superb for putting a soft virtually grain all Metals, Paints, Fibreglass, Plastics, D225 80 Coarse £3.57 free sheen on abraded or machined and Wood. D226 150 Medium £3.57 surfaces, doing fine deburring of intricate D227 300 Fine £3.57 items,removing fine rust or material out of rust pits. The bristles are more flexible than those of wire brushes, and can curl round bosses and obstructions. Much tougher than wire brushes, probably outlasting them ten times. Use the fine brushes for non-ferrous material and the coarse for ferrous. They remain free cutting to the end.

ARBORS (left to right) D238 Mini Arbor £2.76 D236 Long Arbor £3.06 D210 Chuck Arbor £3.57 13127 Expander Wheel Kit D208L 1/2” LH Pigtail £7.66 £50.55 c/w 5 assorted belts D208R 1/2” RH Pigtail £7.66 Additional Belts (pack of 5) D232 Vienna Lime £2.70 (125g) 13073 80 grit £10.21 Use to wipe finger marks from 13078 120 grit £10.21 Satinising Mops the finished item. 13083 220 grit £10.21 4” Diameter Coarse D289 £8.17 13081 320 grit £10.21 COMPOUNDS 4” Diameter Medium D290 £6.64 13082 400 grit £10.21 D219 Vonax £3.06 D291 4” Diameter Fine £5.11 Rigid plastics, Visors, Plastic D288 4” Satinising Set £17.36 Smooth Rough Castings Headlights. SAVE £2.56 D220 Grey (course) £3.06 This soft natural rubber Expander Wheel D221 Green (medium) £3.06 D294 6” Diameter Coarse £12.77 conforms to slightly contoured pieces and D222 Blue £3.06 D292 6” Diameter Medium £11.23 leaves a bright smooth, uniform finish. Fine Finishing (mirror finishes). D293 6” Diameter Fine £7.66 The abrasive bands stay firmly in place because centrifugal force expands the D223 Yellow (Tripoli) £3.06 D295 6” Satinising Set £27.06 rubber wheel. Designed to run at 1,800 Buffing aluminium, brass and SAVE £4.60 rpm so excessive cutting does not occur. copper. Has push out adaptors for 1/2”, 5/8”, 3/4” D224 White £3.06 Get a smart, brushed satin finish with and 1” shaft sizes. Comes with 5-1.5” x Finishing for all metals. these 4 section abrasive nylon lap wheels. 18-15/16” belts – one of each grit size. Order line: 01706 658 619 POLISHING 63

Bobs and Dollies Get in Nooks and Crannies

D235 Flexible Drive £40.34

D206 Felt Bob Kit £16.34 Ideal for Porting or Polishing An add-on kit of taper and cylindrical This 52” long flexible shaft lets you work in tight areas gives more control and allows bobs for polishing into difficult corners better access to nooks and crannies. Fitted with a 6mm chuck to take mops and andshapes, ideal for alloy wheels. brushes. Its ball bearing mounted drive allows speeds up 11 pieces, sizes from 1” down to 1/2” to 3,500 rpm. Use only with 4” diameter or smaller buffs. diameter, to fit on a mini mandrel Avoid tight radius bends to maximize shaft life. (included). D305 Universal Drill Clamp £11.23

Let the clamp secure the drill, when using the flexible drive, or to hold it firm whilst using both hands for polishing.

D207 Mini-Bob Kit £16.85

This add-on kit of mounted polishing bobs lets you get into intricate pieces such as mascots or difficult corners. 10 pieces ranging from 1/2” to 1/4” diameter. Composite Wheels D134 Coarse £8.17 D135 Medium £8.17 D136 Fine £8.17 D130 Aluminium Grinding Point D137 Set of 3 £20.94 SAVE £3.57 £8.68

Perfect finish every time with these These 20mm long and 13mm diameter excellent finishing wheels. Coarse and mounted points are specially formulated medium have abrasive fabric flaps in to grind aluminium without the clogging between nylon pads so two jobs are being that normally occurs with ordinary grinding done at once. Available in three grades, stones. Particularly useful for re-working D240 Dolly Mop Kit £16.85 just insert in the drill and you are ready to aluminium cylinder heads, these points start producing a professional finish at can easily be dressed to shapes to reach A 7-piece mini Dolly Mop Kit containing home. Use at 2-5000 rpm. into corners, around valve guides, etc. 1”, 1-1/2”, 2” Sisal and Calico Mops with a long type arbour for polishing into all those awkward nooks and crannies. D138 Engine Turning Kit £27.06 Designed to be used in conjunction with any polishing kit. Give the finish to dash boards, firewalls,

s rocker boxes or any other metal surface. Also Available: Set up the 1” abrasive cylinder in the drill D300 Wood Polishing Kit £13.79 and start the pattern, overlapping each D115 Bob Polishing Kit £19.91 previous swirl. Run at approx 900rpm. D280 Detailing Kit £18.38 Contains 2-1” diameter rolls and mandrel. D285 Cleanup Kit £18.38 64 MOTORCYCLE ESSENTIALS Order online: www.frost.co.uk

Before After

V138 Blue Away £18.38 (70g) M455 Chain Breaker and Riveting Tool Set £100.60 Will Remove Blueing Blue Away has long been a favourite of the motorcycle industry. Just apply a little to Shorten or Lengthen a soft cloth to buff and to remove discolouration from chrome and stainless steel. Bike Chains Also removes the brown salt stains. A comprehensive tool set for shortening More Cleaning products in the Car Care Section. and lengthening chains by removing or replacing the links. Set includes tools for riveting links in place plus plate holder for connecting links accurately. Works on chain sizes 520 – 530, 420, 428. Set includes: Pin Holder with 27mm fixed shaft. 19mm Pin Head, U Holder with X/Y positional fixings, Plate Holder, 3, 4, 5mm Pins and Anvils.

M476 Coil Spring Compressor M479 Internal Bent Nose Snap £39.83 Ring Pliers £14.30 M494 Fork Oil Level Adjuster Produced in box These 90° bent nose circlip pliers are £29.11 section steel for strength ideal for removing and installing the and supplied with snap rings on hydraulic master cylinders A quick way to set fork oil levels. replacement claws. on motorcycles. Spring loaded action Comprises of a syringed hollow filler A metal tin is supplied for ease of use. and aluminium level adjuster. for storage.

Carcoon Bike Bubble V151S (280cm x 90cm) £220.60 V151L (320cm x 90cm) £241.02 Keep it Safe and Warm M414 Chain Cleaning You can put your bike away for the Winter, Brush £9.70 confident it is safe and warm in the garage. Quick and simple to use, low running costs. Brush for cleaning motorcycle chains The filtered air reduces dust build up and with removable heads for cleaning and condensation, dry bikes do not rust. replacement. Bike Cover V170M (eg. Norton) £65.87 V170L (eg. Harley) £73.53 click on: Breathable, Reflective www.frost.co.uk At shows, rallies or on holiday our bikes are left out to the for more products and rain, dust, bird droppings, tree sap, snow, sun and prying web exclusive offers fingers. Protect your classic with a breathable woven polyester cover with aluminised finish to reflect ultra violet. Order line: 01706 658 619 MOTORCYCLE ESSENTIALS 65

S215 Motorcycle Fuel Tank Repair Kit £38.50 Seal Bike Tanks! Will seal leaks and pin holes and prevent rust from going down the fuel lines. Suitable for ethanol blended fuels, but not suitable for fibreglass tanks. Kit is sized for tanks up to 4 1/2 gallons and includes: S204 Marine Clean S205 Prep & Ready N680 Small Filter £3.00 (pack of 2) S201 Tank Sealer A cloth patch and brush (in case it is necessary Clean Petrol Only to externally reinforce any badly corroded areas). Make sure rust and particles never reach the engine. Fit an in line fuel filter. This is now, more important than ever, because of M367 Brake Piston Removal s the corrosion risk of Ethanol blended fuels. Tool £115.40 A fi lter can be fitted easily to the fuel line in minutes, possibly saving hours at the Dismantle Bike roadside with a clogged carburettor. For Bike and Mowers. Brakes Easily It will drastically reduce the time taken dismantling motorcycle brakes. It will not mark or damage the working part of the Motorcycle piston and will remove frozen pistons with ease. Spindle Tools s M419 Chain Link Extractor and Rivet £60.26 M473 17-19-22-24mm £23.49 Suitable for cam chains and drive chains and versatile enough for chains with a diameter Professional Version of #35 to #630. Each kit contains 3 pins to fit This tool has four stepped sizes to most chain sizes: 2.2, 2.9, 3.8 and is fi t the spindle on most modern recommended for light to medium motorcycles. Use with any 3/8” duty chains. drive tool or with a standard socket. Suitable for use on Honda, Kawasaki, Susuki, Yamaha, Buell and some BMW motorcycles. Manufactured from Chrome Vanadium.

M393 24-22-19mm £7.15 Motorcycle Colortune Kit M426 Fly Wheel Puller £19.91 Economy Version M774 £36.77 (12mm) M776 £36.77 (10mm) The puller has 6 different sizes for the Use as a socket on the free end flywheel wheel rings on motorcycles. to remove the spindle 24mm for Specially designed for motorcycle These tapered lock type rings cannot be Suzuki/ Honda, 22mm Kawasaki, engines, this colortune maintains the removed without the use of this 19mm Yamaha. compression ratio of the engine, specialised tool. Sizes include: M10 x ensuring better firing of the mixture. 1.25R, M14 x 1.5R, M16 x 1.5R, M 18 x1.5R, M24 x 1.0R, M27 x 1.0L. 66 FIBRE GLASS Order online: www.frost.co.uk

Using Fibre Glass • Temperature is important; generally you need 2% catalyst (10g) to 500g of resin, while in cold weather 3% (15g) or only 1% (5g) in hot. Resin pot life should be 15-20 minutes, so don’t mix too much! • Cleanliness is key; grease and dust prevent bonding. Ideally clean with Acetone, but cellulose thinners will do. • Glassfibre is irritating; use protective equipments; overalls, gloves and facemask.

H140 16” PVC Gauntlets £2.55 ANCILLARIES W180C Clear Face Shield £19.00 H130 Overall £5.11 (2 sizes: XL, L) Laminating Brushes X150 1” Brush £1.02 X152 2” Brush £1.53 X153 3” Brush £2.55 X154 Set of 3 £4.59 SAVE 51p Polythene Mixing Buckets X160 1 Litre £1.02 X165 2.5 Litre £1.53 (not shown) 1 2 3 X167 5 Litre £2.04 Accurately measure catalyst for mixing. X135 3” Paddle Roller £7.66 1 Polyester Gel Coat X170 Syringe £1.02 (10ml) X137 6” Paddle Roller £9.70 X110 £14.50 (1kg) X171 Ancillary Kit (X150 – X170) X139 Single Wheel Roller £12.26 X115 £28.50 (2.5kg) £9.64 SAVE £1.07 X138 Set of 3 Rollers £26.66 Gel coat is designed to give a tough, SAVE £3.29 resilient outer skin. Use as first coat on moulds. 600g covers 1sq. metre approx. MATTING After wetting the matting, roll the resin thoroughly. Keep the resin: glass ratio at 2 Polyester Resin CSM (1kg) (not shown) 2-2.5: 1 and air out. X100 £12.50 (1kg) X120 300g per metre £7.66 X105 £23.00 (2.5kg) X125 450g per metre £7.66 X127 600g per metre £7.66 A general purpose clear, lay-up resin plus catalyst. Build up several layers as necessary. The thickness of the matting is referred to 3 Polyester Flow Coat by weight. You need approx 2.5 kg of resin X117 £15.00 (1kg) for every 1kg of Chopped Strand Matting X118 £32.00 (2.5kg) (CSM). Used as the final surface coat. STM (not shown) Dries tack free. X130 1 square metre £4.60 X132 2 square metre £5.11 X175 Fibreglass Repair Kit £22.50 X134 5 square metre £12.26 All you need to repair damaged areas on B258 Fiberplast £21.45 (1.5kg) body panels, spoilers, caravans and Use Surface Tissue Matting (STM) to motorcycle fairings is included: 1kg Two component provide the outer surface onto which you Polyester Resin, 50cc of Catalyst, 1 sq.mtr. glassfibre reinforced can start the surface preparation. CSM, 1 sq.mtr. STM, 1 calibrated mixing polyester filler. cup, 3 pairs of latex gloves, 2 mixing Bodywork that has sticks, 1” application brush. rusted through, can X178 PVA Release Agent £8.68 be filled without having to use fibre matting, Allows Removal L105 Basic Fibreglass can be sanded when cured. of Items from Techniques DVD £17.87 Moulds Glass Fibre Tape PVA (polyvinyl alcohol) Worthwhile Tips! X140 10m x 50mm £7.66 provides a barrier Learn how to repair or create X141 50m x 50mm £18.38 between the resin and new panels in fibreglass. the mould: best if used Includes gelcoats, resins Ideal for reinforcing in conjunction with and catalysts, matting and over seams and corners. carnauba wax. Usually other materials, repairing panels and applied in several coats gelcoat scratches, and much more. to a mould. 1 litre. Order line: 01706 658 619 BRAKES 67

Z335 Red Rubber M521 Tune-up and Brake Grease Bleeding Kit £45.96 £9.70 Perfect for Vacuum Ideal for Operated Systems Brake Pistons A hand-held Vacuum Pump draws Millers red rubber grease for assembly the brake fluid into the reservoir jar, of any components, which are in contact giving true one person brake bleeding with rubber. Particularly ideal for brake and fluid replacement, with a minimum pistons etc. of fuss. Also designed to be used for testing vacuum operated systems ignition, servos, as well as checking for leaks in carburettor, fuel line, manifold, valves etc. Complete with instructions and accessories.

M140 Hydraulic Cable Oiler M520 Eezi-Bleed £18.38 £19.91 (7mm) Silicone Brake and Clutch Fluid Bleed Your System Washer Kits Z300 £36.26 (1 Litre) M141 £7.66 (10mm) Single Handed Z302 £21.45 (0.5 Litre) M142 £7.66 (7mm) A clever little bleeder that uses the Z304 £15.00 (0.25 Litre) pressure in your spare tyre to bleed Without regular maintenance cables air and old fluid from your hydraulic It performs better than glycol based fluids will seize. Accelerator, choke, speedo, system. Eliminates the need for a on three main counts: motorcycle throttle etc, all need helper as you no longer need to 1) It does not absorb moisture and so stops lubrication. This hydraulic cable oiler pump the pedal. Just connect the corrosion and associated problems like forces oil between innerand outer cables Eezibleed as instructed then open sticking calipers, etc. throughout their entire length leaving them each bleed valve in turn until new 2) Because it does not absorb moisture it silky smooth. Accepts most popular cable fluid starts to flow through. Makes has an indefi nite life and does not end fittings up to 3/4” outside diameter. a slow messy job quick and easy. require regular fluid changes. Don’t replace cables – restore them. Supplied with a variety of screw 3) It is non-toxic and virtually inert, caps to fit different master cylinders. meaning it is harmless to you, your car Multi-purpose cap may be required and your paintwork. Meets D.O.T. Safety for non-screw type reservoirs. Standards in the UK, US, and Europe.

NOTE: Not suitable for replacing mineral oil fluids used in many Citroen and Rolls Royce vehicles.

C280 Brake Cleaner £4.60 (500ml)

For looks and efficiency brakes need cleaning. Ouraerosol removes brake fluid, oil, grease, asbestos M229 Brake Spring Tool £4.60 M519 Eezi-Bleed Multi and synthetic dust. Purpose Cap £15.32 Caneven free seized brakes. Can stop brake squeal and Hold and Stretch Springs Fits reservoirs up to 67mm. Suitable clutch slip when caused by Handy tool for holding and stretching for most non-screw reservoirs caps contamination and glazing. springs. Slide spring into slot and screw (bayonet) or awkward sized screw handle to lock on to the spring. Great for caps. Held in place with straps, More Frost Aerosols online use on brake systems that do not use which pass under the reservoir. Use keyword: (Frost aerosol) anchor pins. 68 BRAKES Order online: www.frost.co.uk

M259 Brake Tubing Forming Pliers £21.45

Align, Bend and Adjust Align, bend, and adjust 3/16” and 1/4” M100 Hose Clamp £5.62 brake andfuel lines with a twist of the wrist. Whether fitting new brake pipe or decreasing the bend radius next to a fitting, this tool is indispensable.The shaped jaws bend tubing without distortion. Retain Fluid This handy little tool pinches flexible hoses without damaging them. For brake, radiator, heater, washer systems and fuel lines. Clamp up to 19 mm (3/4”) hose.

M230 Retaining Spring Tool £9.19

Keeps Little Springs Under Control M227 Corrosion Tool £8.68 M865 Brake Caliper Wind Back The little springs and cup washers that Tool £29.11 keep your brake shoes flat against the backplate regularly fly across the garage Check Brake Pipes when being installed or removed with This handy tool features three scraping Helps prevent damage pliers. Our tool makes it a simple matter positions for removal of grime and debris to pistons and seals of push and turn to either removeor fit and detection of deteriorating or corroded and enables the them and keeps everything in place. brake pipes. Great help for service rewinding of Fits 16-22mm (5/8 to 7/8”) diameters. maintenance and pre-MOT inspection. pistons back into the core onmost disc brake calipers. Allows you to replace worn pads onboth wind back and push back type brakes. Suitable for most UK vehicles, includes Ford, Honda, Jaguar, Nissan, Peugeot, Rover, Toyota, VW, Audi, Saab and Subaru.

L470 Automotive Brake Manual £19.00 M257 Brake Fluid Tester £20.00 M860 Brake Adjusting WAS £38.00 Spanner Set £19.91 The Complete Guide Know When to Don’t spoil your adjuster screws – Complete guide to the use these hardened and tempered inspection, maintenance Replace Your Fluid Chrome Vanadium steel brake spanners. and repair of braking Moisture in your brake fluid will give They fit most popular sizes of brake systems on all popular cars and light impaired performance and can be pipes and nipples. commercial vehicles. It covers tools and dangerous. This simple tester checks Contents: 1/4 Sq x 10mm Sq, 1/4 Sq x 5/16 equipment, disc, drum brakes and anti- the percentage of water in your fluid, Open Ended, 8mm Hex x 10mm Hex, 9mm lock braking systems, hydraulic system indicating when to replace it. Hex x 11mm Hex, 1/4 Hex x 7mm Hex, 7/16 servicing, repairs and an easy guide to Open Ended x 11/32 Square. fault finding. Order line: 01706 658 619 BRAKES 69

Brake Pipes

M250 Flaring Tool £40.34 M250F Spare Forming Bar £6.13

This simple all-in-one imperial Make Square Cuts flaring tool makes it quicker and easier to flare your own pipes and is much easier to use in situ – i.e. lying on your back under your car. No more dismantling and assembling the tool between flares. • Covers 5 popular pipe sizes: 3/16, 1/4, 5/16, 3/8, 1/2”. M256 Brake and Pipe Seal £11.23 • Produces male, female and double flares.

Brake and pipe sealant is an elastic gasket M258 Bending Tool £19.91 used to seal threaded components. Ideal formost industrial fluids, including water, Pipe bending tool will put smooth even curves petrol, gas and brake fluid. Resistant to into 3/16” (4.7mm) to 3/8” (10mm) brake pipe and pressure, vibration, shock and heat, cures tubing up to 90º. within the joint when air is excluded.

Brake Pipe M252 £17.36 (3/16”) M253 £38.81 (1/4”) M254 £50.55 (5/16”) M225 Brake Spring Pliers £10.21 M300 Mini Tube Cutter £5.11 Seamless Copper Nickel Brake Pipe Fit Drum Springs Make Square Cuts Harder and more resistant to vibration and Brake shoe return springs are notoriously The smallest tube cutter we could find so corrosion than copper or steel, yet is still tough to remove so these 305mm (12”) you can use it in those tight spots when easily shaped and flared to fit your vehicle. pliers give you the necessary leverage to fitting new pipes to your car. Only needs Available in three diameters 3/16, 1/4 and unhook or replace them while keeping 32mm (1-1/4”) clearance to cut 3mm (1/8”) 5/16”. All supplied in 7.77m (25ft) coils. your fingers well out of the way. to 16mm (5/8”) brake and fuel pipes.

M232 Brake Shoe Spring Hook

s Tool £9.70 Pull Springs Specifically designed to assist with the installation and removal of strong springs such as drum brake springs. From heat treated alloy steel. Brake Pipe Fittings M650 UNF £57.19 (27pcs) M245 Professional Flaring Tool

to suit most cars up to mid 70’s s £138.89 (3/16”+1/4”) M660 Metric £57.19 (27pcs) to suit most cars after mid 70’s M247 Pipe Tools £15.83 (5/16”-8mm) M652 Male 3/8” x 24 £8.17 (10pcs) Pro Flares M654 Female 3/8” x 24 £9.19 (10pcs) There is no point in economising on brake pipes or Don’t let rust eat away at your pipe their joints – either they are leakproof or one day fittings or prevent them being undone. there won‘t be any brakes. Here is a professional These sets contain solid brass male/female flaring tool at an affordable price. Fit it in your vice, unions, in-line connectors, 3 and 4 way screw the clamp down on 3/16 or 1/4” diameter connectors, clips and bleed screws, brake pipe. Use the fast cam action on the punch sufficient for an average car. tool to form perfect single or double flares. 70 BODYWORK Panelwork Order online: www.frost.co.uk

N670 Heat Gun £29.50 Was £39.00

If the paint is warmed with a hot air gun whilst the wheel arch is being stretched F670 Wing Roller £148.00 the paint will often soften sufficiently Was £168.00 G200 Spot Weld Cutter £9.70 not to crack or chip. G202 Spot Weld Cutter Set £20.43 • Heavy-duty 2000 watt gun with F672 Wing Roller Heat Gun G201 Replacement Cutter £5.62 Combo £168.00 variable heat settings SAVE £9.50 • Can be used for paint removal, sealing, shaping plastics, drying paint Cut Spotwelds Increase Your Tyre and fillers and even for lead loading. The first has an adjustable centre point to Wing Clearance which can be set for depth allowing you to cut around the weld, releasing the top Increase tyre to wing clearance, flare sheet only, and not weakening the lower arches or repair wheel arch collision panel. The circular cutting blade is damage with this professional forming reversible for double life. Use drill on slow tool. Bolts directly to the hub flange speed. Can be bought individually or as with elongated holes in adapter plate part of our spot weld cutter set complete to fit all popular 4 and 5 bolt hubs. with three cutters and centre punch. The forming arm adjusts from 14” to 22 3/4”. With a little heat it is possible to s fold the inner lip flat without damaging 11537 Hand Wing Former Tool the paint. £50.04 G208 Cobalt Spot Weld Drill Make Tyre Clearance £11.23 When your tyre catches the wheel arch edge, use the Hand Wing former Alternatively, you may prefer our 8mm to produce a rolled edge that will not cobalt drill, which is sharpened to a flat interfere with the tyre. Warm the paint with a small ’pip’ to locate in the centre of with a heat gun to ease forming without a spot weld. The cobalt drill will last longer damaging the paint. and can be resharpened. s F355 Joggler Hole Punch £50.55 F356 Joggler Only £40.34 (No Hole Punch)

Joggle the Joint Two Tools in one. An edge joggler and hole punch so you produce perfect flush welded lap joints every time with the minimum of effort. The joggling jaws set F285 Dent Pullers £15.60 (Set of 3) F560 Body Set £79.00 down a 12mm wide step along the panel Was £81.19 edge in mild steel up to 1.2mm (18g). Pop Out Small Dents The long handles make it easy to use, and Starting Point for any by simply twisting the head it becomes an These all rubber suction cups have excellent hole punch making perfect 5mm finger grips for strong pulling power. Bodywork Restoration holes every time, ready for plug welding. Ideal for minor panel dents and also for Our seven-piece bodyset provides the This robust tool brings professional quality handling glass, lifting sheet metal, etc. starting point for any bodywork restoration. work to your fingertips with machine Set of three features 2 x 64mm (2 1/2”) This set has satin polished hardened accuracy. F356 offers the same quality and 1 x 82mm (3 1/4”) pullers. faces, hickory handles and comes with a tooling with Joggling jaws only. All have vacuum release tabs. protective carry case. Order line: 01706 658 619 Shrinker BODYWORK 71

Use the Strinking / Stretching Machine

Shrinker Stretchers Without a doubt one of the most versatile sheet metal working tools you could hope to find. The shrinker / stretcher will quickly and easily pull shape into either steel or aluminium. Use it to fabricate or repair panels anywhere on your car but especially those awkward areas around headlights, around the edges of window frames, door edges, rain channels, wheel arch rims etc. With the shrinker / stretcher you don’t need to cut-and-weld in order to create curves in sections – simply shrink or stretch the metal into smooth even curvatures in a fraction of the time.

51088 Shrinker/Stretcher Set £198.13

No Need to Change the Jaws Ideal for making perfect-fit rust repair metal work around wheel wells, door jams, windshields, dog legs, boot gutters... almost any metal fabrication requiring a combination curve and angle. Works up to 18 gauge mild steel and 16 gauge aluminium. Clamps in your vice or is drilled for bench mounting. Set includes two jaws, two bodies and two handles.

Y399 Shrinker Stretcher Stand £301.28

Shrinker Stand Only Your shrinker / stretcher set fits easily onto thisready assembled stand, foot operated it will freeup your hands to concentrate on the job and speed up the process of Y215 Deep Throat Shrinker shaping the metal. You can fit a separate £499.00 Was £667.91 shrinker / stretcher to the top.

Only 3 left in stock s Y397 Complete Shrinker/ Simplifies and Speeds Stretcher Stand Set £528.00 Up Panel Forming Complete Set This robust cast iron framed shrinker simplifies and speeds up panel forming Includes two separate pedal driven operations. Far superior to the hit and shaping units, one to stretch, one to miss method using heating and quenching shrink, mounted on the above stand. to shrink metal. It will easily work up to 1.2mm (18g) steel or 1.5mm (16g) aluminium, brass, copper and reaches 228mm (9inch) into your panel. Ideal for click on: either making new panels or reshaping www.frost.co.uk damaged old ones. Comes complete for more products and with shrinking jaws, operating lever and maintenance instructions. Size 9” throat, web exclusive offers 14” long, 8” wide, 14” high. 72 BODYWORK Metalwork Order online: www.frost.co.uk

21749 Tubing Notcher £74.95 G455 Hole Saw Set £30.60 (16, 20, 25, 32, 40, 51mm dia.) G460 Tubing Notcher/Hole Saw Set Combo £97.37 SAVE £8.18

Pipe Notcher Makes it Easy to Join Round or Rectangular Tubes Steel tube is used for all kinds of fabrication work (motorbike frames, racing car chassis, roll bars, welding trolleys, go-karts, etc.) but can be tricky when you want to make neat butt welded T-joints. This Pipe Notcher is designed for use with any hand-held drill or drill press. Uses standard hole saw blades (not included) up to two inch diameter. Features compound angle adjustment up to 60 degrees. Easy to read angle scales. Holds up to 2” diameter round tube or 2” x 2 1/2” rectangular tube.

See Working with Tubing DVD in the DVD Section. Y820 Planishing Hammer £599.00

Save Time with this Pheumatic Hammer Reduce the amount of time you spend working on smoothing a panel, making domed parts, motorcycle fuel tanks, or custom parts with this machine. • 5 different profile, lower anvils • Does a better job and is much faster than using a hammer and dolly by hand • Make your own parts, straighten and smooth original sheet metal panels • Frame is from 4” x 4” tube, with a 600mm throat • Complete with foot pedal and filter/ s regulator • Needs 12cfm at normal airline pressure BY222 Metal Bender £77.00 giving about 1,600 blows per minute • Size 80cm x 90cm x 160cm high. 52kilos. Make Your Own Brackets and Clamps Quickly produce smooth even bends in flat strip up to 6mm x 50mm mild steel, and More Sheet Metal 16mm round or square rod, allowing you to make One- Of-A-Kind or Duplicate parts fast Machines available online and easy . Comes with an assortment of mandrels and rollers; 7 round dies for bending, (1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/2”. 3” ) and 1 Right-Angle Die. Bending angle up to 200°.

L715 Hammerforming Techniques DVD £30.24 L115 Sheet Metal Ten Hammerforming Techniques Work by R.E. Wakeford Ten different hammerforming operations are demonstrated, from a £8.00 tank top to a beautiful rolled edge. Has close-up shots of all aspects of the hammerforming process. 76 minutes. More DVD’s in the DVD Section. Order line: 01706 658 619 Metalwork BODYWORK 73

Y920 42” Wheeling Machine £5,435.23 (1100mm) c/w 3 lower wheels and legs Y922 Additional Wheel for Y920 £290.04 (each) choice of 9 profiles Y925 21” Wheeling Machine £1,965.00 (530mm) illustrated c/w 2 lower wheels BY900 Bench Mounted Swage £298.00 Y926 Additional Wheel for Y925 £171.57 (each) choice of 8 profiles Clamps Perfectly Y927 Fabricated Legs for Y925 on to Your Worktop £179.74 (pair) Just clamp on to the worktop and the swivel top lets you turn the head to the English Wheel is Essential most convenient position for the work for Hand Fabrication of and the handle. Comes complete with six Double Curvature Panels sets of rolls. Includes jenny, wiring and The rigid cast-iron frames ensure minimum swaging wheels. See English Wheel Techniques DVD deflection in use. The 1100mm (42”) throat in the DVD Section. machine has long been the standard in coach-building, but the 530mm (21”) throat machine is suitable for use in car restor- ation work. Big enough to handle door skins, wings, bonnets, boots, it has all the same quality features of our larger machines.

Y026 Fabricated Wheeler s £699.00 (890mm)

All the Features of the Larger Machines This simple fabricated wheeling machine has a 890mm throat and all the features of the larger machines. Includes large top wheel on races, 6 lower rolls, quick Y845 8” Throat Swage £897.00 release, and lower wheel adjustment. Used to smoothly stretch sheet metal Joggle, Jenny or without heating or hammering. Flange Edges This Swage enables you to jenny or Y890 Frost Deep Throat Swage flange edges, joggle, roll swage lines, £599.00 create wired edges, etc. Comes complete and ready for use, with six pairs of wheels. Has a 215mm throat x 1.2mm Heavy Duty Steel Swage mild steel capacity. Indispensable for the fabrication of floorpans, fuel tanks, race car interiors, body panels etc. Deep 458mm (18”) throat means you can roll More Metalwork stiffening swages to the centre of 915mm Machines available online (36”) panels – necessary to strengthen and stop flexing. Comes with a pair of standard 6mm (1/4”) diameter beading heads or blanks for you to machine your own profiles. s 28069 Deep Throat Bead Roller £399.00

Comes with Six Pairs of Wheels This 18” throat metal working system easily forms steel and aluminium up to 18 gauge. You can make replacement panels, add stiffening beads or create custom parts. The cast frame offers superior strength and has less flex than other models. The system has tool steel mandrels for top quality performance. Includes three bead rollers, (1/4, 3/8 and 1/2), and three joggling wheels (1/16, 1/8 and 1/4). 74 BODYWORK Metalwork Order online: www.frost.co.uk

Sheet Metal (600 x 900mm) BY698 Steel 0.7-0.8mm £11.95 BY701 Steel 0.9-1mm £12.95 BY706 Steel 1.1-1.2mm £17.95 BY711 Aluminium 1.2mm £15.95 BY716 Aluminium 1.5mm £17.95

Sheet Steel and Aluminium LtoR: Set, Snap, Groover Even though you might only need a couple of square feet of sheet metal to Rivet Set Combination repair your car, you will have to buy a F930 £8.17 (1/8”) standard eight foot by four foot sheet F931 £8.17 (5/32”) from your local steel stockholder. F932 £8.17 (3/16”) Now though, we can supply you with smaller sheets of either steel or Rivet Snap aluminium to suit your smaller projects. F937 £6.64 (3/16”) Mild steel is 1449-CR4 grade. Aluminium F939 £6.64 (1/4”) is EN 485 1050 H14 Half-Hard grade. F940 £6.64 (1/8”) Tinmans Groover F925 £18.38 (1/4”wide) F927 £24.00 (3/8”wide)

Make a Neat Job of Rivets The finish of your work is what gets seen. Set rivets correctly and get your edges right with these hard-to find period tools.

Hand Seamer F270 £42.89 (3-1/2”) F271 £30.50 (1”) M600 Deburring Tool £10.21 M605 Double Burr for Sheet Make Short Folds Metal £20.43 Often you will need to fold seams and Deburring Blades (Set of 2) flanges in confined spaces on a vehicle, M601 Steel/Aluminium £4.09 where a full sized or bench folder cannot M602 Brass/Cast Iron £4.09 be used. This is when you need the F558 Folding Pliers £47.49 machined jaws of the Hand Seamer to Remove Burrs produce neat, tight folds. Two jaw sizes Shrink Flanged Edge are available to suit your application. Removes burrs from the edges of holes, tubes and straight edges. Easy to use tool on Curved Panels with swivel blade ensures correct cutting Excellent tool for shrinking flanged edges More Metalwork angle at all times. Comes fitted with a on curved panels. Sheet metal is slipped Machines available online blade for steel and aluminium. Blade between the tongues and the pliers twisted available for brass and cast iron. as they are lifted to make an edge.

BY205 Folder 600mm £59.00 (24”) s No More Hammer Marks Make the job look professional – no more hammer marks. This vice mounted folder allows you to make bends in sheet metal up to 0.9mm or 1.00mm for shorter lengths. Order line: 01706 658 619 Metal Forming BODYWORK 75

Hole Flare F600 Mushroom Stake £124.80 (140 x 100mm, 8.5kg) F105 £44.94 (1”) F610 Rugby Ball Stake £124.80 (240 x 120mm, 9.5kg) F106 £56.17 (1.5”) F620 Saddle Stake £124.80 (249 x 120mm, 11kg) F107 £67.40 (52mm) F108 £50.55 (1.25”) T-Dollies and Domed Stakes F109 £73.02 (65mm) Our chilled cast and polished domed head stakes come in three different profi les for F111 £76.09 (75mm) producing curved sheet metal panels. They feature a square tapered shaft to secure in an anvil, bench top or fabricated stand. Used in conjunction with Tinman Mallet. Adds Rigidity and Strength to a Panel F642 Set of 3 T-Dollies £29.97 After Cutting a Hole (13-19-25mm) Was £39.50 The flare adds rigidity and strength to a The T-Dollies can be clamped in your panel after cutting a hole as well as giving s vice or hand held to enable you to it a professional finish. Locates in a hole form accurately radiused panel edges cut with our hole punches and tighten and flanges with tinman mallets or the bolt to flare. Suitable for steel to 1mm flat faced bats. and Aluminium 1.5mm.

Flat Faced Bat Forming Bats Chase Wedge F245 £15.32 (2”wide) F241 Egg Shaped Bat £15.32 F340 £11.23 50mm (2”) F246 £16.34 (2 1/4”wide) F242 Oval Bat £15.32 F341 £15.83 76mm (3”) F247 £17.36 (2 1/2”wide) F243 Conical Bat £15.32 F342 £13.79 64mm (2 1/2”) F248 Self-Adhesive Leather Face F244 Set of 3 £41.87 SAVE £4.09 £2.04 Used in conjunction with a tinmans Simple yet effective tools for stretching mallet to drive sheet metal into difficult These hardwood forming bats are used to sheet metal into gentle curvatures. configurations. Force of the blow is mallet flat sheet over a T-dolly or length of Forming bats provide a long gentle blow directed exactly where desired, to form pipe to form soft radius work. While the bare without marring the work piece. swage lines, recesses, boot and engine wooden surface is OK or working steel, we Vital when creating flowing curves in body bay gutters, etc. The heads of these recommend using the self adhesive leather panels. Made from selected hornbeam. hardwood wedges can be reshaped to cover when forming aluminium. suit your own application.

Ball Stake

s F650 Small £71.49 (48mm) F651 Medium £82.72 (70mm) F652 Large £103.15 (100mm) F653 Set of 3 £240.00 SAVE £17.36

When handcrafting panels, you never seem to have quite the right shape stake for the job. • For difficult shapes like cycle mudguards and motorcycle petrol tanks etc. • Three different sizes with a solid shank for vice mounting and drilled for hanging storage. 76 BODYWORK Metal Forming Order online: www.frost.co.uk

F220

F221 Hardwood Tinmans Mallet F210 £12.26 38mm (1 1/2”) F220 Sandbag £46.00 (18”) F211 £14.30 50mm (2”) F221 Oval Sandbag £32.68 F212 £16.34 63mm (2 1/2”) 11” x 9” (279 mm x 228 mm) F213 £18.38 76mm (3”)

Sand Supports the Metal Shape Aluminium or The centre piece of the traditional sheet metal workers bench, the 458mm (18”) Thin Sheet Steel diameter sandbag hollows with blows of the bossing mallet allowing the metal to These general purpose hardwood mallets stretch to the shape required. Made from best quality leather, hand stitched for are particularly useful for shaping strength, these bags are supplied empty requiring filling with dry silver sand through aluminium or thin sheet steel over a former a velcro side opening. See Shaping Aluminium DVD in the DVD Section. such as our cast iron stakes and T-dollies.

F222 Hand Held Shot Bag £29.62

Flexible Dolly s This small leather bag 153 x 76 x 32mm (6 x 3 x 1 1/2”) is held like a dolly allowing mallet shaping workto be carried out in situ. Supplied filled with steel shot.

Profile Template F358 £13.79 200mm (8”) F359 £21.26 300mm (12”)

Bossing Mallet Making Sure the Right F204 £17.00 50mm (2”) Panel is the Same as the Bossing Mallet F205 £21.00 63mm (2 1/2”) Left Panel F200 £25.02 38mm (1 1/2”) F206 £27.00 70mm (2 3/4”) F201 £28.09 50mm (2”) Gone are the days of painfully scrutinising F202 £31.15 63mm (2 1/2”) Plastic Tinmans Mallets panels with the naked eye, which are F203 £36.18 76mm (3”) F207 £10.70 38mm (1 1/2”) almost impossible to judge. Now you can F208 £16.50 50mm (2”) use the Profile Template. Press it against F209 £19.00 63mm (2 1/2”) any panel and the individually sprung Shape Sheet Metal plastic blades will replicate an exact All four sizes of Bossing Mallet are made mirror image. Available in two handy sizes with Hardwood Heads and cane handles. Super Plastic Mallets starting with the baby 200mm (8”), perfect This dense wood delivers the necessary With ultra-high molecular weight polythene for reproducing the shape of small, tricky blow to shape sheet metal and are still heads offer high impact, durability and high panels, and the 300mm (12”), ideal for made to the exacting standards that abrasive resistance, plus resistance to working on larger body panels. Be sure coachbuilders have demanded over most chemicals. Wooden handles will the right panel is the same shape as the many years. not fracture or splinter. left with this tool. Order line: 01706 658 619 Hammers|Dollies BODYWORK 77

F510 Spiral Shrinking Hammer £58.80 Loose that Metal An interesting idea but does it work? We took a sample along to professional restoration workshops and they immediately placed F100 Slide Hammer £30.64 their orders. “The only shrinking hammer I’ve tried L110 Pulls Dents Out that actually works.” was Save your no claims discount, remove Key to Metal the comment of one dents permanently yourself with this Bumping experienced body man. superb lightweight slide hammer. Supplied £13.50 The spirally milled face of the hammer is mounted with vulcanised complete with all the attachments you will by rubber against an angled adaptor. Upon impact the head grips the need to do a first class professional job Frank T. Sargent surface and twists causing the metal to shrink. This unique tool in your own garage. will prove to be a boon to anyone in panel forming or repair.

Range of Shapes and Weights to Suit Almost Any Application

Our range of highly polished steel dollies, slappers, spoons and hammers mounted on hickory shafts are of the highest quality. (§) = not shown. F503 F500 F520 F514 HAMMERS F506 F522 F523 PLANISHING Round and Square Faces F500 £29.11 (450gm) F501 £26.55 (§) (300gm) F502 £28.60 (§) (380gm) F505 F504 F520 £28.60 (430gm) F526 F527 F515 SHRINKING Round checked, Smooth Square Face F513 F503 £40.34 (500gm) CROSS PEIN Offset Square Face-Round Cross Pein F504 £36.77 (450gm) DOLLIES Offset Square Face-Round Straight Pein F505 £36.77 (450gm) F530 General Purpose £50.55 (1350gm) F535 Bobbin £29.11 (700gm) Finishing Hammer-Curved Cross Pein F532 Small General Purpose F536 Toe £32.88 (1140gm) F526 £35.23 (330gm) £47.49 (1100gm) F537 Claw £45.96 (1000gm) Finishing Hammer-Straight Pein F531 Heel £32.17 (1000gm) F538 Utility £50.55 (1100gm) F527 £35.23 (330gm) F533 Curved £45.96 (900gm) F539 Wedge £56.17 (1050gm) Round and Cross Pein F534 Mercedes £48.00 (1650gm) F540 Shrinking £38.81 (1220gm) F515 £25.53 (300gm) F535 F536 F539 BUMPING One Rectangle Face F506 £36.77 (300gm)

Round and Crease Faces F534 F532 F513 £27.57 (500gm) F533 F538 F537 F530 F540 F531 Single Round Face F514 £31.15 (680gm) SPOONS F556 PICK Low Spot Pick Hammer F555 Shrinking Slapper £55.15 (600gm) F522 Long £28.60 (450gm) F556 Prying £34.68 (290mm) F523 Short £30.64 (350gm) F557 Bumping £45.96 (§) (390mm) F555 78 BODYWORK Cutting Order online: www.frost.co.uk

G115 Super Sheet Metal s Cutter £27.40 G116 Spare Blade £6.00

Cut Without Distortion Unlike conventional snips that can distort your workpiece, this cutter will easily cut through 1mm (20g) steel and 1.2mm (18g) aluminium, brass and copper without curling the material away. Can be usedto trim edges, cut circles and curves, or cut out material mid-panel starting from onlya 6mm (1⁄4”) hole. Ideal for trimming corroded sections out of otherwise sound body panels. G190 Nibbler £30.13 G118 Sheet Metal Cutter £11.74 s G191 Spare Punch £4.09 G119 Spare Blade £5.62 (Pack of 2) G192 Spare Die £6.64

DIY Quality Cuts 1mm steel, 1.2mm aluminium, copper and brass. Cuts Without Distortion Fitted in an electric or air powered drill it will make straight or curved cuts, burr G250 Imperial Hand Punch Set free, with no distortion to the metal panel. £45.00 WAS £75.00 Will cut 2mm (14g) aluminium, 1.5mm Please see page 87 for Special Offer (16g) steel [max.], or 1mm (20g) stainless

s steel by nibbling 3.5mm (1⁄ 8”) wide chips. Accurately Punch Just the job for removing damaged or Rivet Holes rusty car panels. To cut from the centre of apanel, just drill a 13mm (1⁄2”) hole Kit contains seven punch and die sets – and insert the cutting head. 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”. The punch and die heads produce perfectly round, burr free holes in up to1.5mm (16g) steel and 2.5mm (12g) aluminium. When working along a panel edge just mark the pitch on your job then set the depth gauge on the hand punch up to 51mm (2” deep), to produce lines of equidistant holes.

Hole Punch G130 Set of 4 £38.60 (1/2”, 5/8”, 3/4”, 1”) G131 Set of 6 £59.90 (as G130 Plus 11/4” and 11/2”) Offset Snips G150 Hand Nibbler £24.51 G240 Right-Cut £21.45 Round Hole Punch G241 Left-Cut £21.45 Cut Where Access G137 £30.13 52mm diameter (clocks) G138 £48.51 65mm diameter G242 Set of 2 £40.85 is Limited G139 £81.19 75mm diameter SAVE £2.05 One of the handiest cutting tools for making distortion free cuts in 1mm (20g) With all the features of conventional steel, 1.2mm (18g) aluminium, and other Punch Holes in Steel aviation snips, these have the added sheet materials. Ideal for cutting away Punch holes in steel up to 1.2mm (18g) benefit of offset handles to keep your corroded body sections; cutting clearance thick. Makes a neat and accurate hole hands above sharp edges, providing gaps for wiring and fi ttings; installation in sheet metal. 75 different sizes are you with better visibility and of radios, gauges, etc., and is easy to use available (Imperial and metric, round, manoeuvrability when working to a line. where access is limited. Requires only square andrectangular). For special Either offset pair cuts good straight lines, a 10mm hole for starting cutting in the requirement, please phone with details. eliminating the need for a third pair of centre of a panel. yellow snips. Order line: 01706 658 619 Cutting BODYWORK 79

BY835 Throatless Shear £127.00

Make Straight and Curved Cuts Easily Make straight or curved cuts effortlessly with the hand lever throatless shear. It has 100mm long curved Aviation Snips G175 Gilbow Shears 12” Straight blades. Easily cuts 2mm G100 Right-Cut £16.80 £38.40 mildsteel, adjustable G102 Left-Cut £16.80 blades provide for G103 Straight-Cut £16.80 For Cutting Whole Sheet burr free cutting. G104 Set of 3 £45.36 • Made from drop forged steel SAVE £5.04 • Thick section: hollow ground jaws will not deflect when cutting 18g steel or Compound Leverage 16g aluminium • Ideal for cutting whole sheets, or large Action for Greater areas of waste before trimming to a Shearing Power line with aviation strips. Not to be confused with cheap imitations, they may look similar but there is no comparison. Originally developed for the aviation industry, these quality cutting tools feature a compound leverage action for greater shearing power. The forged alloy steel blades will handle up to 1.2mm (18g) steel. Right-cut snips cut curves to the right and vice-versa for left-cut snips.

Overall Score: 19/20. Cutting ability: 6/6 - Resistance to twisting: 5/5 - Cut quality 5/5 - Handle comfort 3/4. “Well made and comfortable, the Midwest straight-cut aviation snips G219 Light Duty Metal Shears have awesome cutting ability. They ate through the thin £44.94 steel and took on the thicker stuff with ease – with exceptionally clean cuts all the way. The Spring-loaded action was the most impressive on test, with the Shear Straight and handles shooting back into the ready position after each cut”. August 2009 (page 118). Gentle Curves with Ease • Cuts up to 1.2mm (18g) mild steel sheet • Quick shearing of straight and gentle curve cuts with a ratche action operation • Can be bolted down to a bench or vice mounted. Stepped Drill Bits G210 4-20mm 9 hole £18.00 G211 6-30mm 13 hole £26.55

Self Starting Stepped Drill Bits Without needing a centre punch or pilot G450 Angled Head Shears hole, these bits will provide true round, £15.83 parallel-sided, holes in thin material; metal, wood or plastic. Better than conventional twist drills which vibrate and produce For Cutting Gentle triangular holes, or tapered drills which Curves G231 Taper Reamer £14.81 produce tapered sides. A robust set of shears with angled head, for cutting gentle curves to the left or Size Those Holes click on: right, on sheet steel, aluminium or copper A real problem solver when you need www.frost.co.uk and can also be used for wire netting to ream, deburr, don’t have the right size andpackaging. The angled head keeps drill or align holes in overlapping panels. for more products and hands above the metal. Size 4mm to 22mm diameter. web exclusive offers 80 BODYWORK Miscellaneous Order online: www.frost.co.uk

For Your Doors s

F280 Door Skinning Tool £49.99

How do you crimp a new door skin tight without marking the outside face? First fit the skin onto the door frame and use the door skinning tool to bring the flanged edge over the door frame. Then reverse the tool and use the plastic face to crimp the edge tight to the frame. Bullseye Pick 31001 15” Reach £57.19 31002 20” Reach £63.32 31003 30” Reach £66.89 31000 Set of 3 £168.66 SAVE £18.74 31004B Optional Blunt Tip £9.70

Straighten Metal s with Accuracy F570 Hinge Pin Remover The accuracy, speed and ease of operation F950 Door Adjuster Kit £19.91 £22.95 of a bullseye pick produces quality work faster than conventional methods. Use the Comprising of a laser cut gap gauge, 10” No more struggling with this specially optional Blunt Tip when bumping metal. straight and angled pry bars. These large designed labour saver. Removes hollow • Designed for angle picking around levers give minimal damage when prying doorhinge pins with the minimum of braces, gussets, or other hard-to-reach doors, bonnet or boot. The gap gauge effort. Supplied with two pin sizes places makes it easy to confirm a consistent gap. 4mm x 100mm and 5mm x 100mm. • The site does not have to be flat on the surface to work, just tilt it to any angle needed to clear an underside brace • Designed to return to open position when released.

F290 Impact Driver £13.28

To Make A Perfect Shut Screws on door hinges and latch plates tend to be very difficult to loosen, but a strike with an impact driver usually breaks them free. Comes complete with two straight and two crosspoint bits to fit in the 1/2” drive socket. MAGNETIC

J200 Sheet and Wire Gauge £13.28 J360 Magnetic Rulers £14.97

Cut the Guesswork Hand Free Measuring 31092 Panel Flanger £30.13 A quick and accurate gauge to take the Allow hands free measuring of any steel guess work out of material thickness. surface, flat or curved. Three lengths in A Neat, Precise Offset Covers all imperial sheet metal sizes the pack, 300mm, 600mm and 900mm from 1g (0.3”) to 36g (0.0076”). which will cover most applications for Make professional looking replacement customcar painters, welders, signwriters panels. Works really well on wing edges Drill Gauges available page 33. or bodyshop use. Pack of three. after rusted areas are cut out. Fits into hard-to-reach areas easily. The 10” handles give you extra leverage for easy flanges. Strong cam action jaws K455 Sheet Metal Clamp £7.66 produce an offset lip in sheet steel up to 18 gauge, so replacement panels fit flush to the body. Little grinding is required Bend Thin Metal after welding and almost no filler. This wide jaws clamp is a favourite when it comes to bending Makes a neat, precise offset. thin material. Also useful for gripping fabrics such as seat webbing. Order line: 01706 658 619 Miscellaneous BODYWORK 81

K290 1/8” Blind Fasteners £12.77 (Pack of 10) K291 1/2” Edge Grip £9.70 (Pack of 2) K292 Pliers £9.19 K293 Temporary Sheet Fasteners Kit £28.94 SAVE £2.72 C Clamps (K290 / K291/ K292) K440 6” £6.64 K445 11” £9.19 Quick, Easy Clamping K450 18” £13.28 No more fumbling with G-clamps, K451 Set of 3 £26.20 SAVE £2.91 pop rivets and extra pairs of hands. This sheet metal holding system quickly and easily clamps lap jointed panels Hold Work Before Bonding together before final welding, bonding, or riveting. The blind fasteners have an expanding pin which, when inserted through an 1/8” hole in your job and released, Three sizes of self-locking clamp to suit exerts over 18 lbs. holding pressure. The edge grips have 1/2” deep jaws to clamp various applications, holding work before flanges and other edge work. Installation pliers overcome the powerful spring welding, riveting or bonding. All have self- pressure. Start with a kit, and then build it up by ordering extra fasteners as you levelling swivel pads to protect work and need them. Originally designed for assembling aircraft skins, this is the best provide a better grip. fastening system we have seen.

F275 Rivet Dimpler £30.13 T595 Rivet Kit £32.68 T196 Rivet Nut Tool Kit £69.95

Steel Rivets (Box of 100) Hide Your Rivets! Set Nuts in Sheet Metal T425S Short £3.57 (1/8”) The problem with rivets has always been T431S Medium £4.09 (1/8”) that you could never hide them – until now! Contains rivet nut pliers (with a thumb T437S Long £4.60 (1/8”) By dimpling the holes in the panel before knob for unscrewing the tool from the nut rivet after setting) and an assortment T534S Medium £5.11 (5/32”) riveting, the rivet heads will lie below the of rivet nut systems, suitable to create (3/16”) surface allowing you to fill and forget! T631S Short £6.64 captive nuts on vehicles and for steel T638S Medium £7.15 (3/16”) fabrication. Enclosed in plastic carry case. T645S Long £7.66 (3/16”)

Aluminium Rivets (Box of 100) T425A Short £3.57 (1/8”) T431A Medium £4.09 (1/8”) T437A Long £4.60 (1/8”) T534A Medium £5.11 (5/32”) T631A Short £6.64 (3/16”) T638A Medium £7.15 (3/16”) M987 Rivedrill £75.60 T645A Long £7.66 (3/16”) K435 Plate Grip Plier £11.88 Sets Rivets Twice Indispensable Rivet Sets as Fast as Hand Tools Get a Grip! Contains long reach plier riveter, capacity Converts your drill into blind rivet gun. Straight-line motion of mobile jaw allows 3, 4, 5mm (1/8”, 5/32”, 3/16”), with long Can set up twice as many rivets as can for perpendicular clamping and helps avoid reach nose allowing access to deep be set by hand. The rivet is expelled when panels ‘slipping’ out of alignment. True narrow places on vehicles and a starter the drill is operated in the “reverse” mode. one-handed operation, push button on top selection of fasteners, presented in a Comes complete with 3.2mm (1/8”), 4mm allows for controlled release of clamp with durable plastic case. (5/32”) and 4.8mm (3/16”) nosepieces. thumb while hand grips both handles. 82 WHEELS and TYRES Order online: www.frost.co.uk

Cleaning s V135 Frost Ali-Clean £10.21 V360 P21S Wheel (1 litre) Cleaner £15.32 (500ml) The Best Cleaner for Alloy Wheels Safe and Ideal for cleaning alloy wheel rims and Effective! unpolished castings. These cannot be The manufacturers’ polished as the blackening which results approved way to discolours the semi porous surface. remove corrosive brake Spray Ali Clean, work in with a stiff nylon dust and road grime brush: it cleans and etches these surfaces. from alloy wheels. All the residue is simply washed away Safe, pH controlled, leaving a clean bright finish. formula is guaranteed not to attack any type of road wheel, braking system or other automotive surface. Works safely V120 Whitewall Concentrate and effectively on every type of wheel and coating. s £14.30 (500ml)

Clean Dirt V365 Tyre Dressing and Stains £5.11 (500ml) Commonly available tyre cleaners are fine for black tyres Washes away dirt and but useless on whitewalls or grime dries leaving a lettered tyres. This specially beautifully prepared tyre formulated cleaner is not a • Does not crack or peel paint, dye or solvent and cleans • Does not harm wheels dirt and stains from the very or trims. poresof rubber. White is restored to original white, black is left with a satin sheen.

Painting P256 Frost Wheel Silver £6.64 (500ml)

Restores Alloy Wheels s Specially formulated to restore alloy wheels on classic or modern vehicles to a like new finish. Perfect for covering damage and scuffs. For best results use over P270 Grey Primer. See Painting section.

More Frost Aerosols online Use keyword: (Frost aerosol)

V430 White Tyre Pen £5.11 V425 Tyre Black £5.62 (175ml) Highlights the Tyre Brand Gives A New The world’s best ‘Paint in a Pen’ tyre

s marker, as supplied to leading motor Look to Tyres sport teams for the past 25 years. It gives a professional, ‘as new’ It was primarily designed as a tyre marker look to your tyres and is the perfect finishing but is also suitable for marking most touch. One of the most durable tyre finishing surfaces including brake, engine and body products on the market. Can be used on its own, components, engineering applications or to give a strong contrasting black finish for including setting out, data and identification tyre lettering with the tyre pen. marking. Comes complete with instructions. Order line: 01706 658 619 WHEELS and TYRES 83

Wheel Balancing Tools

N305 Copper/Hide Hammer £19.91 N310 Wheel Brush £4.09 (11” long)

Have the right equipment for removing and cleaning those wheels. Combination copper and hide hammer is ideal for the spinners, doing minimal damage to the plating. 1 kilo, 300mm handle. Similar to original equipment. N720 Wheel Balancer £60.26

Now you have a way of static balancing your wheels at home. Centreson a cone allowing all types of wheels with 1 1/2” to 4 1/2” diameter. centre to be balanced including wire wheels. Works with a bullseye bubble level in the hub centre, all mounted on a hardened pivot point.

N550 Five Valve Caps M530 Tyre Valve Screwdriver £5.11 £8.68

Plastic valve caps don’t look right Neat tool which quickly removes N722 Wheel Weight Pliers £12.77 on period cars. They don’t look and installs both valve sizes. much on modern ones either! Simple and cheap. For fitting, removing and cutting vehicle wheel Smarten up both your cars. weights. Drop forged carbon steel hardened, tempered, heat treated and plated finish for corrosion protection. PVC dipped handles.

N724 Wheel Weights Adhesive £10.00

Self Adhesive strip of weights for adding to the inside of wheels. 60 grams per strip consisting of 4 x 10 gm sections and 4 x 5 gm sections. 25 strips

N640 Tyre Inflator £15.60

A robust trigger operated inflator with gauge, dual marked, reading up to 6.5 bar, (100psi). Inlet Size 1/4 BSP.

N725 Wheel Weights Clip On £19.40 N650 Tyre Levers £15.83 (85 pieces) (pair) click on: These UK made weights will fit a wide variety of Need to fit your own tyres or repair www.frost.co.uk steel wheels. The cam-backed weights are a puncture? These EN8, hot forged, designed to give high levels of grip to ensure no 18” long levers will easily provide for more products and movement on heavy braking, which can cause the lift required to remove or install web exclusive offers imbalance. Sizes are from 5g to 60g. a tyre. Zinc plated. 84 SUSPENSION Order online: www.frost.co.uk

K245 Denso Tape £10.21

Keeps Water, Dust and Dirt Out To keep water, dirt and dust from ingress between the leaves of the road springs,they are wrapped with tape. Denso has been the choice since before the war. Also has the effect of stiffening the springs when tightly bound. Roll 10 metres by 50mm wide.

M280 Trakrite £70.98

Wheel Alignment Gauge Simple drive-over gauge that indicates by means of a pointer if there is any sideways scrub of the tyre against the road surface, and in which way the adjustment should M840 Puller Set £16.00 be made to rectify it. All that is needed is a level surface on which to carry out the With Reversible Jaws! M770 Pry Bar Set £15.83 check. Couldn’t be simpler. Set Includes 3 heavy-duty gear pullers with reversible jaws for internal or Simply, Align and Lift external use. Tools are made of forged Prise, Split, Twist. Align, Lift, with this steel with chrome finish. Sizes 75mm, handy set of 4. Save your screwdriver for 100mm and 150mm. screws. 8”, 12”, 18”, 24”.

M222 Camber Gauge £34.72 M810 Grease Forcer £9.19 M825 Bearing Separator £16.34 Are You Cornering Clears Any Blocked When Ordinary Puller Correctly? Greasers Jaws Won’t Reach! If the camber of your wheel is not set Clear any blocked greasers simply. Removes gears, bearings, bearing cones, correctly the car will not corner correctly Fill the barrel with oil and place the end bushes and similar parts from shafts and poor tyre wear can result. This over the nipple. Strike the plunger with a where ordinary puller jaws will not reach. inexpensive gauge will check the angle hammer to force oil down, clearing Forged separators with knife edges to+ or - 3 degrees. Locks onto the disc or blocked scrolls and passageways. minimize damage to parts. Range 25-60mm. other component with its magnetic base.

L475 Suspension and Brakes £14.00 check out our by Des Hammill Technical Articles Learn how to get the best out of wishbone front suspension, coil Section online springs and telescopic shocks. Includes details on chassis click www.frost.co.uk integrity, geometry, rideheight, camber, castor, kpi, testing and adjustment. 2nd Edition, 128 pages, paperback. Order line: 01706 658 619 SUSPENSION 85

M762 CVJ Boot Clamp Tool with Cutter £15.32

Need New Boots? This tool is essential to aid fast tensioning and securing of CVJ boot banding material. Simply insert banding, tension using winding mechanism, and then pull over lever to quickly cut the band to length. Can also be used for hoses.

M763 Boot Bands £3.57 (2 pieces)

Once you have the CV boots in place, use these bands to secure them.

M760 Boot Installer £12.26 M270 Coil Spring Compressors £18.95 (Pair) Install Without Damage How do you get a new boot or gater over Double Hook the CV joint with outdamage? You slide it over a cone. Simple. Spring Compressor Using on a coil spring, they make slippage around the coils most unlikely. They are ideally suited for stripping Macpherson struts aswell as standard coil springs. A pair of compressors with drop forged arms. Suitable for operation with 1/2” square drive – 13/16” A/F nut.

Ball Joint Remover CV Boot M961 (25/35 shaft, 80/112 joint) Steering Boot £11.23 Ball Joint M951 (10/22/40 shaft, 26/32/40 rack) M962 (19/29 shaft, 73/102 joint) Puller £11.74 £11.23 M952 (10/26/38 shaft, 26/32/40 rack) M966 24/34 shaft, 76/106 joint) £11.74 £11.23 M953 (10/30/40 shaft, 44/52 rack) M967 22/31 shaft, 74/104 joint) £11.74 £11.23 Ball Joint Separator More information availabe online More information availabe online Ball Joint M275 Puller £9.19 M276 Remover £13.28 M755 Bearing Drifts £36.77 M277 Separator £12.26 s

Split Ball Joint Tapers Drive Bearings and Seals Tools you simply can not do without if you intend carrying out work on vehicle Don’t risk damage when installing steering and suspension systems. new bearings and seals. The Forked Separator requires a hammer There are nine different sizes, blow to drive a wedge between the joint giving 40-81mm diameter to provide and track control arm. The Puller and the correct size driver for most seal, Remover use pressure applied by means bush or bearing installations. of a screw thread to force the tapered ball joint out of place. All have 17mm capacity. 86 CONSUMABLES Order online: www.frost.co.uk

Fasteners continued MISCELLANEOUS T240 Self Tapping Screws s £14.81 (800 pieces) T560 Stainless Steel Split Pins 8 sizes of plated pan head posidrive self £9.70 (105 pieces) tappers: from 6-12 gauge.

Do Not Rust! E-Clip (800 pieces) They do not rust, so they look better and T055 Imperial 1 ⁄ 8” to 5 ⁄8” £17.04 are easier to remove. Diameters from 1/32” T127 Metric 1.7-15.5mm £15.83 to 3/16”. Lengths from 5/8” to 2”. T037 Circlips Internal and FASTENERS T069 Trim Fixings £29.62 External £16.85 (280 pieces) (280 pieces) Plastic box containing sizes from 11-38mm. High Tensile Set Screws Assortment of plastic interior bodywork (150 pieces) fixings, trim buttons, lock nuts etc. PIPES and WIRES T005 UNF (3/16”-3/8” dia) £17.36 T007 UNC (1/4“-3/8” dia) £17.87 Grease Nipples T591 Copper P-Clips £15.32 T009 Metric M5-M10 £13.79 T159 Imperial £39.83 (90 pieces) (60 pieces) T011 Metric Fine M5-M10 £33.00 T115 Metric £37.79 (115 pieces) For brakes and fuel pipes 3/16”, 1/4”, 5/16” An assortment of Grease Nipples, angled Nylon Insert Nuts Box and 3/8”. and straight. (300 pieces) T103 Heat Shrink Tubing £18.89 T013 UNF (1⁄4”-1⁄2”) T072 Expansion Springs £14.30 £16.34 (160 pieces) (70 pieces) T014 UNC (1⁄4”-1⁄2”) £21.96 Identify, Insulate WiresVarious colours and T015 Metric M6-M11 £16.34 70 springs with pre-formed eyes or hooks sizes. from 6mm dia to 11mm dia, 30 to 125mm T051 Sheet Metal Screws and long. T515 Plastic Cable Tie J Nuts £25.53 (400 pieces) Assortment £7.66 T089 Compression Springs Washer faced. Sizes 8-14. (80 pieces) £13.79 (70 pieces) 4”, 6”, 8”, 12” and 15”. Exhaust Manifold Studs Plated springs from 5 to 18mm dia, 19 to 126mm long. and Nuts T043 Pre-insulated Terminals T026 Brass Manifold £27.00 £19.91 (206 pieces) M8x1.25, M10x1.5, T555 Tool Clips £7.80 Complete with crimping pliers. M10x1.25. 72 pcs. (36 pieces) T116 Brass Metric £28.09 T044 Once your car is tidied up, you might want Grommets £16.85 (240 pieces) to organise your garage. An assortment of Met Coarse, Met fine, unc/unc, unc/unf, Holed and blanking 1⁄4”-1”. spring steel tool clips from 1/2” to 1-1/2”. unf/unf. 81 pcs. T550 Hose Clips £21.60 (50 pieces) T712 T746 For small petrol hose size up to 2-1⁄8.

T506 S/S Hose Clamps £24.51 (50 pieces) For 8mm to 50mm pipe sizes.

Washer Tube (10m) Fuel Tube Rubber (1m) T512 Plastic P-Clips £8.68 T712 5mm (3/16”) ID, 5/16” OD T746 6mm Bore, 7/16” OD £3.57 (51 pieces) £4.60 T747 8mm Bore, 1/2” OD £3.57 Sizes 3⁄16”, 1⁄4”, 1⁄ 2”, 3 ⁄4”. T713 6mm (1/4”) ID, 3/8” OD £5.11 T748 10mm Bore, 5/8” OD £3.57 Why is it that T801 T721 the Assorted Hardware You Need, Never Seems to be in the Quantities Heater Hose (5m) Advanced Retard Tube (2m) You Want? T801 1/2” Bore, 3/4” OD £10.72 T721 (1/8”) OD Nylon £2.55 For ten assorted boxes T802 5/8” Bore, 7/8” OD £12.26 T742 3mm ID Rubber, 3/8” OD £3.57 N580 Stand £24.51 T803 3/4” Bore, 1” OD £14.30 T744 4mm ID Rubber, 3/8” OD £4.09 T805 Empty Box £2.55 Order line: 01706 658 619 AMAZING SPRING OFFERS 87 WASHERS and SEALING RINGS Don’t Miss Out!

Copper Sealing Washers T023 Imperial (1/4”-1 3/16” i.d.) Versa-Cut Cutter £30.13 (220 pieces) T106 Metric M5 - M18 £36.27 (250 pieces) Eastwood Plasma Cutter NOW £349.00 Red Fibre Washers Was £449.00 (600 pieces) Special Product Code: T025 Imperial (3/8”-1”) £20.94 BY12740OFFER 22% T143 Metric M5 - M18 £22.98 See page 11 for details Suit banjos, plugs, jets etc.

T028 Shim Washers £31.66 (400 pieces) Ideal for Shimming, Dynamos, Distributors. Accurately Punch Rivet Holes 0.010” / 0.015” thick shim washers with bore sizes from 3/16”. Imperial Hand Punch Set NOW £45.00 O-Ring 30 sizes Was £75.00 T500 Imperial (1/8”-15/8”) £28.60 (382 pieces) Special Product Code: T505 Metric (3 - 35mm) £25.53 G250OFFER 40% (385 pieces) See page 78 for details

T027 Shakeproof Washers £16.34 (1000 pieces) M5-M13 disc lock washers. Sucks Gearbox and Differential Oil Out T022 Repair Washers £14.30 (240 pieces) Oil Suction Pump Zinc plated. Suit M5, 6, 8 and 10 bolts NOW £9.99 (3/16”- 3/8”). Was £16.34 Steel Spring Washers Special Product Code: (1000 pieces) N735OFFER 39% T021 Imperial (3/8”-1”) £17.87 See page 94 for details T077 Metric M5 - M20 £17.87

T048 Rivets £16.85 (500 pieces) Aluminium rivets with washers. Range from 3.2mm (1/8”) to 4.8mm (3/16”). Various lengths Be Professional as and fl anges. Never Before

Reinforced Adhesive Tape Farecla Smart Scratch Remover paste permanently removes scuffs and scratches K200 Black £4.60 from any colour of paint, leaving a high gloss K206 Blue £4.60 finish. 150ml Tube. K204 Red £4.60 K202 Silver £4.60 Farecla Scratch Remover Paste K210 White £4.60 K208 Yellow £4.60 NOW £6.00 Was £8.17 For all kinds of temporary and permanent holding jobs where other Special Product Code: 27% types of tape simply will not hold. Securing V346OFFER disconnected wires, hoses, cables; temporary positioning of panels for measuring, checking fi t; temporary hose repair; securing number plates on trailers. 50m long x 50mm wide. Be Quick Whilst Stocks Last!! 88 AIR TOOLS Order online: www.frost.co.uk

A525 Dual Action Sander £48.00 A461 Impact Wrench £39.50 D363 80 grit (pack of 20) £8.26 D364 180 grit (pack of 20) £8.26 Ideal for Use Where A598 Punch and Flange £75.57 D365 320 grit (pack of 20) £8.26 Space is Limited D366 500 grit (pack of 20) £8.26 The Ideal Tool This 3/8” Butterfly air impact wrench is small and light yet very powerful. for the Job! For That Smooth Touch • Built in power regulator and air inlet A flanging tool with a hole punch to 6” dual action random orbital sander for swivel of 360 degrees enable you to produce the perfect flush swirl free quality finishing. Great for • Butterfly throttle reverse and speed weld lap joints every time. Air Punch smoothing and blending body filler before control button, which is a one handed and Flanging Tool is ideal for crimping painting. Complete with operation and hole punching, has a crimping speed regulator. Takes • The rubber nose guard protects for capacity of 1.6mm steel, or aluminium, hook and loop backed long working life and a hole size of 4.8mm (3/16”). discs. • Ideal for use where space is limited.

A101 3/8” Reversible Air Drill £43.00

A109 Air Brush £28.50 A139 Blow Gun £11.23 A Powerful Low Vibration Drill Professional Quality Blows Away Dust A powerful, low vibration, workshop drill Suitable for small or large-scale working. Blow away dust, swarf, water etc. with with a reversing facility for drilling holes Comes with colour cup, jar, brush holder, this well-balanced gun. Comes with up to 3/8”. Supplied with two coupling 6” vinyl hose and airline adaptor. extension nozzle for holes. Works at 30 adaptors, tool oil and Instructions. Normal working pressure 25 psi. to 90 psi. About 4 cfm consumption.

Accessories

A947 Five Piece Air Accessory Kit £31.00

Essential 5 piece air accessory kits for general purpose use containing all the items required for: • Spraying: Suction spray gun (1 litre capacity) • Washing: Paraffi n spray gun (1 litre capacity) • Degreasing • Tyre infl ation: Tyre Infl ator (0 to 12 bar gauge) • Blow gun and coiled polyurethane air hose (5m length) Complete with genuine PCL Vertex coupling and Standard Adaptors.

A881 Hose £22.47

A high quality high visibility orange PVC reinforced professional hose. Gives improved abrasion/oil/fuel and kink resistance due to its advanced material and construction. Very hard wearing but still flexible. Silicone free so as not to react with paint. It is 15 metres long and fitted with female BSP ends. Safe to 300psi. Order line: 01706 658 619 AIR TOOLS 89 Cutting Tools

A754 Sheet Metal Shear A584 Air Nibbler £63.00 A578 Die Grinder Set £30.13 £55.00 A755 Spare Blade £16.75 Polish Your Ports Saves Time Shear has a cutting capacity of Lightweight designed Die Grinder has a and Effort When 18 gauge (1.2mm) mild steel. built-in regulator for positive speed control Designed for body shops, sheet metal giving up to 22,000 rpm from the direct Cutting Sheet Metal! shop and tinsmiths. Fitted with heavy drive motor. Air Inlet – 1/4” Operating It is a lot less tiring than an ordinary duty cutting blades, for a long life. Pressure 90psi. Air Consumption 4.0 cfm. hand nibbler and it leaves your work Removes a 1/4” strip of material, with 6mm Collet Size. Kit comes complete with free from burrs and distortion. Easily minimal deformation. Speed 2,100 ten grinding stones, in a case. cuts tight radius corners or contoured rpm. operating pressure 90 psi, air shapes, up to 1.2mm mild steel. consumption 4.0 cfm.

A702 Cut Off Tool £29.62 A805 Air Ratchet Wrench Kit C591 Replacement Disc £52.50 £1.50 each 3/8” square drive Air Ratchet Wrench Cuts Through contained in a storage case with 7 impact sockets (9, 10, 11, 13, 14, 17, 19mm), Body Panels extension bar, universal joint, screwdriver This tool cuts through body panels, A809 Air Hammer / Chisel bits, 1/4” BSP nipple, 3/8” x 1/2” adaptor, light sheet metal, nuts, bolts etc. £36.00 two coupling adaptors. About 4cfm It includes a safety guard, safety consumption. 17 pieces. trigger and speed regulator. Trade quality body chisel for rapid Also a very good tool for cutting removal of body panels, exhausts through exhaust pipes. etc. Very useful for removing bathroom and kitchen tiles. Supplied in a case with five chisels and two coupling adaptors.

A601 Air Body Saw A321 A322 A324 A323 A326 £67.50 Coupling and Tails A602 Spare Blades £9.70 A321 1/4 BSP Female Coupling £6.00 A322 1/4 BSP Male Coupling £6.00 Effortless Cutting A323 1/4 BSP Male Bayonet £2.00 Quality body saw takes all the effort out of cutting throughcar wings, sills, skins A324 1/4 BSP Female Bayonet £2.00 and exhaust systems etc. Supplied with two coupling adaptors and instructions. A326 1/4 Bore Hose Bayonet £2.00 90 FILLERS Order online: www.frost.co.uk

R235 Micro Weld 80 £79.50

Bumper Repair Kit Repair you own plastic bumpers and other problem plastics (TPO, TEO, and PP) like the professionals do! The versatile FiberFlex welding rods eliminate the need s to identify the plastic. Kit contains: 80 watt B270 Dinitrol 6070 Plastic iron with stand, special round tip for easy B250 Metalised Body Filler Contour Putty £11.03 (500g) spreading and £24.51 (2kg) shaping of the FiberFlex welding Fill Plastics rod, stainless Non Porous Filler A special fine elastic filler, suitable to steel wire Came out as Best Budget Buy in an apply on all kinds of materials, especially reinforcing mesh independent survey into non porous fillers, the refi nishing of practically all vehicle creates repairs for its ease of application, overall finish plastic parts and panels. that are often and the effortlessness with which it could • Suitable for levelling out cracks, dents stronger than the be rubbed down. 6/6 for value for money! and uneven surfaces after plastic repair original part, a Metal fillers create a stronger and more • Rapid drying time to a pore free, finish stainless steel flexible repair than a standard body filler. • Can be easily sanded after 25mins wire brush to • Adheres well to plastics, GRP (polyester keep build- and epoxy films) zinc coated sheets up from forming and matt burnished 2-coat lacquers. on the tip and Not suitable for use on: Soft PVC, hard rubber, 15ft of FibreFlex rods, instructions. thermoplastic lacquers and PTFE. Requires 240 volt mains supply.

R250 Fast Patch £32.00

Moldable Rigid Plastic Repair POR Patch Self-adhesive repair material designed to quickly repair tears, holes S470 Black £16.20 (118ml) and other damage to plastic parts. When heat is applied to the patch, S475 White £16.20 (118ml) it can be formed into the shape of the repair area. Once cool, the patch material hardens into its new shape to provide additional support to the repair. The net result is a stronger repair with Apply Right Over great peel resistance. Bonds to virtually any plastic. Rust or Metal Contents: 5”x 8” patch material, 2 cleaner wipes, Thicker version of the POR-15 paint adhesion promoter wipes and instructions. to use for fi lling seams or holes. • Dry as a rock and remain flexible • Once dry, totally impervious to fuels and solvents S611 Megafill 6110 £9.70 (400ml) • May add strength to weakened metal • Won’t absorb moisture and swell For Small Repairs on like conventional body fillers. Painted Surfaces Used to smooth scratches, scuffs and other minor s damage. It is a grey acrylic- based aerosol filler for small B162 Sanding Board £19.50 repairs on painted surfaces. (paper not included) • Excellent filling properties USE IT TO: permanently seal seam – Sanding Paper (pack of 10) • Easy to grind wet or dry patch holes in steel, wood or • Quick drying plastics – repair loose furniture B163 80 Grit £4.85 • Flexible and compatible joints, concrete and cinder blocks – B166 120 Grit £4.85 with most repair lacquers. bond steel to plastic, wood or concrete – fix holes in fuel tanks. Make sanding on long or large areas easier and quicker. A comfortable shaped holder takes self grip, 70 x 420 papers. More Dinitrol Products More POR-15 Products Can be fitted with dust extraction. in the Rust Section in the Painting Section Order line: 01706 658 619 FILLERS 91

Introduction to Load Led Body Soldering First clean the area to be filled, back to bare metal with a Stripping Disc (see Cleaning Section), abrasive sandpaper etc. Brush Solder Paste over an area slightly larger than that to be filled and heat the area gently until you see the solder paint “tin” the panel. Remove excess solder paint with B145 Standard Solder Kit £78.13 a clean cloth. Next, melt blobs of body solder onto the panel over the area to be Everything you need to start work on your filled. Prepare your Paddles by warming restoration project: the surface of the Tallow and wiping your • Solder paste paddle in the molten puddle. • Pack of 5 brushes With a suitable amount of body solder now • Tallow deposited on the panel, heat it carefully • Flexible file holder c/w blade until it can be spread like butter with your • 2 paddles paddle. Control heat carefully and keep spreading until body solder is evenly • 3 sticks of solder spread over area. Wash with cool water to quench and to remove traces of acid • Auto body solder book. solder paint. Don’t grind or sand, use a Flexible File.

G260 Flexible File Holder B140 Basic Solder Kit £38.40 Solder Stick (0.5kg) £33.19 c/w 9tpi std cut blade B130 (One) £7.45 • Solder paste • Brush B131 (Pack of 10) £67.50 Bodyfile Blades • Tallow • 2 paddles SAVE £7.00 G280 Standard Cut 9tpi £19.91 • 2 sticks of solder G281 Plastic Cut 6.5tpi £19.91 “Body lead” or “solder sticks” are a tin – G282 Fine Cut 13tpi £19.91 Solder Paste lead alloy, which is composed to hold B100 £9.90 (200g) the “butter” consistency over a big Allows you to adjust the shape of the temperature range while it is being spread. blade to that of the panel – concave or B108 £19.50 (450g) convex. Brings up the high and low spots easily. A quick action turnbuckle adjusts Solder paste is a the contour. Uses 14” flat file blades. mixture of finely powdered solder and soldering flux combined with a suspension agent that prevents the metal settling. This prevents separate handling Maple Paddle of solder and flux. Ideal for tinning of car B125 Flat £5.65 panels, bodies, radiators, copper pipes B126 Half Round £5.65 and joints etc. Maple is used for the spreading paddles as it tends to hold its shape and surface B110 Tallow £7.15 (1lb tub) better than other woods. Tend to use half round for hollows Best quality hard and flat for convex shapes. L170 Auto Body Solder white tallow, Book £8.00 normally used as a lubricant when B105 Brushes £3.00 (pack of 5) It breathes new life into a dying craft, threading conduit giving clear concise information on pipe or pulling Nylon bristled the tools and materials needed and the electric cables, but ideal for lubricating brushes with stand techniques involved. Illustrated with the paddles on the bodysolder as it is the acid contained 64 photographs. Perfect companion to non-volatile, non-acidic, non-alkali, in the solder our body soldering supplies. non-corrosive and non-toxic. (tinning) paste. 92 GASKETS and SEALERS Order online: www.frost.co.uk

S125 Captain Tolley’s Creeping Crack Cure £7.66 (60ml)

Cure Leaks Anywhere So thin that by capillary action it can find its way inside fine cracks and set to a clear, fl exible seal. This water-based sealant cures leaks around windows, metal and rubber trim, fittings and P150 Gasket Stripper £6.13 (500ml) rivets. Use in the house for S160 Wad-Punch Set £43.91 (1/4”-1” diameter) kitchen worktops, shower trays, vases, glass, flat roofs S169 1/64” (0.4mm) Oil Paper £3.65 (0.5 x 1m) and swimming pools. Compatible with (0.5 x 1m) S170 1/32” (0.8mm) Oil Paper £4.60 wood, rubber, glass, metals, acrylic, some S174 1/16” (1.6mm) Rubber Cork £7.25 (0.5 x 1m) rigid plastics, glass fibre, ceramics, S175 1/8” (3.0mm) Rubber Cork £11.75 (0.5 x 1m) concrete, brickwork and old sealants. S179 1/32” (0.8mm) Graphited SLS £22.47 (0.5 x 0.5m) Will not dissolve polystyrene. S180 1/16” (1.6mm) Graphited SLS £26.04 (0.5 x 0.5m) S177 (1.5mm) Red Fibre £8.25 (325 x 325mm)

Stop Those Leaks For Good Our aerosol Gasket Stripper dissolves any remnants of old gaskets and sealing compound, which can then be removed with the hardened steel tipped gasket scraper. Use your parts as templates to mark out the shape of your new gaskets and cut out S495 Hylomar Universal Blue with scissors. Holes can be neatly punched with the Wad-Punch Set which has 9 sizes £6.13 (100g) from 1⁄4” to 1”. Use Oil Paper to seal components such as thermostat housings, fuel pumps, Rubber Cork for sumps and rocker covers, Graphited SLS where there is moderate heat and Red Fibre for sealing washers on fuel lines and sump plugs. Leading Non-Setting No more oil leaks – no more oily patches – no more foot prints in the house. Gasket and Sealing Compound in Use S176 Gasket Combo Kit £26.50 Worldwide SAVE 75p Used by many of the world’s major automotive manufacturers and by several Have Gasket Material Formula 1 teams. • Unlimited assembly time to Hand • Resistance to combustion products, Have gasket material to hand and save money water, engine coolant, petroleum, with this kit: two oil papers (S169 and S170) and lubricating oils, kerosene and two cork sheets (S174 and S175). fluorocarbon refrigerants.

Wad Punch G402 1-1/4” £18.38 click on: ss G404 1-1/2” £24.00 www.frost.co.uk G406 1-3/4” £37.28 for more products and For larger holes in gaskets, oil drains, vents, etc. web exclusive offers

S430 POR15 Fire Seal 2000 £14.50

Repair High Temp Components Now you can repair cracks, pits or holes in exhaust manifold, tail-pipes, silencers or other components subjected to high temperatures. Resistant to fuels, oils and corrosive materials, Fire seal 2000 will withstand temperatures of up to 1094°C and can be applied to rough STAGE 1 STAGE 2 STAGE 3 surfaced or sand blasted steel, stainless steel, or cast iron. Order line: 01706 658 619 GASKETS and SEALERS 93

S100 Oyltite Stik £15.50

Stop Leaks Without Rebuilding Stop leaks at gasket flanges, joints, rivet holes etc. until the next rebuild. Simply rub the Oyltite Stik vigorously into the leak area until forced into cracks and it will dry to prevent petrol, oil and water leaks. Joint Sealer Can also be used as a thread sealer on S110 Black £10.21 (310ml) assembly work. For low pressure up to S111 White £10.21 (310ml) 15 PSI (1BAR). S112 Skeleton Gun £3.06

New Joints Need Sealing S120 Brushable Seam Sealer (1 kilo) After welding, you must always seal joints £13.98 between panels properly, preventing future corrosion caused by moisture seeping into Protect Seams the joints. It is easy to apply with a Corrosion caused by moisture creeping standard caulk gun and dries within hours into the small gaps between spot welded (dependant on conditions) ready to paint. panels is one of the most common problems encountered on older vehicles. Using P130 Zinc Rich Primer prior to S116 Stud and Bearing £12.26 assembly helps combat this, but for assembled panels you can only hope to seal out moisture with a good quality seam sealer applied over the joint with a brush or spatula. S117 Lock and Seal £12.26 Does not sag and is touch dry in hours. Can be painted over in 2 to 3 hours. S118 Sleeve and Bush £12.26 S115 Set of 3 Locksealers £32.68 SAVE £4.10

Don’t Move! Handy size (50ml) S460 RTV Instant Gasket £4.60 for the toolbox and Replace fragile paper, cork and felt gaskets excellent value. with a tough rubber seal. 85gm. Disassembly will • Resistant to oil transmission fluid, water be diffi cult. N370 Fusion Bond £9.70 (50ml) and antifreeze Will fill 0.3mm gap. N375 Applicator Gun £18.00 • Has a temperature range from -60 to • High strength Stud and Bearing N376 Nozzles (5) £3.57 260°C. for threaded fasteners • Medium strength Lock and Seal for N377 Fusion Bond Kit £29.50 fasteners which need to be undone SAVE £1.77 with normal tools • High strength / high viscosity Sleeve and Repair Plastic Bush for bearings, collars, splines etc. Here is a way to repair cracks and holes in bumpers, spoilers, ducting and boats. S490 High Temperature Gasket Off white colour. Sealer £6.64 (85gm) M830 Stop Leak £7.66 • High impact bond on composites, (250ml) ceramics, and fibreglass • Seal manifolds, headers and other • Fast cure of 10 mins engine components with red gasket Minimise Oil • Resistant to fuels, lubricants and cement solvents • Seal with temperatures up to 300°C Leaks • Structural methacrylate bonder • Replaces pre-formed gaskets and Minimise oil leaks by restoring • Ideal for bonding dissimilar materials. remains flexible. the performance of elastomer seals. Add 250ml contents s to engine or gearbox oil to S140 Aqua Stick £11.23 maintain the tightness in old or leaking seals. Suitable for diesel and Make Permanent Repairs petrol engines, gear boxes The fast easy way to make permanent repairs and patches – it works even on wet and axles. surfaces and up to 150°C. Chop a piece off the two part stick, kneed together, More Millers Oils on pages press onto the roughened surface. After 1/2 hour it can be fi led, drilled, tapped or 94 - 95 sawn. Cures to full strength in 24 hours. A must for every toolbox. 94 FUEL and OIL Order online: www.frost.co.uk

N730 Oil Drain £48.51

Make an Oil Change Easy Fluid extractors make an oil change easy, as oil is pumped out through the dipstick hole. The 6mm wide extraction tube is long enough not to be restrictive and is made from a super-flexible sprung metal, making it easy to feed down dipstick tube. The 6.0-litre capacity is ample for most oil Z350 Water Pump Grease changes, and the dumpy design is extremely £13.28 (500g) stable. Saves you having to dig out your jack and axle stands to get to the sump plug. A premium quality calcium based grease suitable for applications involving moderate temperatures. Recommended for both plain and anti-friction bearings. N745 Multi Purpose Mini Pump £14.81 Smooth texture and extremely water repellent. Makes All Top Up Jobs Easy s Ideal for gear boxes, differentials, lawn mowers, chain saws, outboard motors. Suitable for oils, automatic transmission fluids, brake fluids and general purpose cleaners. 1 litre capacity with 0.13 oz per stroke. s N680 Small Fuel Filters £3.00 (pack of 2) for Bikes and Mowers N125 Large Fuel Filters £3.50 (pack of 2) for cars N630 Mini Grease Gun £10.72 N631 Extra Grease Tube £3.57 Clean Petrol Only Make sure rust and particles never reach the engine. Squirt Grease Just Fit an in line fuel filter. This is now, more important than Where You Need It ever, because of the corrosion risk of Ethanol blended fuels. A filter can be fitted easily to the fuel line in Ideal for lubricating door hinges, check minutes, possibly saving hours at the roadside with a straps and bonnet catch slides. clogged carburettor. Z330 General Purpose Grease Please see page 87 for Special Offer £6.13 (500g) N735 Oil Suction Pump £9.99 WAS £16.34 Millers Delta EP2 is a high quality general purpose grease, suitable for chassis points, king pins and wheel bearings. Sucks Gearbox and Differential Oil Out With its 8” flex hose, this powerful N595 500ml capacity suction pump makes Pistol Grease s Gun £23.00 N268 Jerry Can Pump £49.00 quick work of the messiest jobs. N265 20 litres Jerry Can £23.98 Z338 Grease Gun

N264 10 litres Jerry Can £17.99 s Cartridge £3.06 N266 Spout £9.59 N635 HP Push Type Oil (400g) Gun £16.34 Quality tool with diecast Fuel Transfer Many pre-war cars have oil head and port for air Don’t break your back; take the effort out nipples for suspension bleeder. Designed for single of refuelling. Clip the unit onto jerry can components. This high pressure handed operation. Complete filler neck; pump up and down and the fuel telescopic tube gun is designed with coupler and rigid extension will flow into your tank. At full flow it takes for oil and petroleum products. tube. Suitable for cartridge or bulk about half a minute to empty a 20-litre jerry 150cc capacity, 0.5cc delivery filling. Safe working pressure can. Pipe length 780mm from jerry can. per stroke. 345 bar/ 5000 psi. Order line: 01706 658 619 FUEL and OIL 95

MILLERS OILS NOTE: Multi Grade Oils are not recommended for engines which emply rollerbearing crankshaft.

TRANSMISSION OILS ENGINE OILS MISC CLASSIC OILS (1 litre) (5 litres) (1 litre)

Z105 Classic Gear Oil Z100 Classic 20w50 Z120 Worm Steering 80w 90-GL4 £9.49 £28.99 Box Oil £16.99 Extreme pressure Mineral based engine oil High viscosity oil for all transmission oil to GL4 for for classic engines from steering box applications. classic transmissions for 1950s-1970s. vehicles from 1950s onwards. Z170 CM2T 2-Stroke Recommended for vehicles Z102 Classic Sport Oil £10.99 with overdrive. 20w50 £40.99 SAE 40 mineral 2 stroke oil Semi-synthetic engine oil for Z110 Classic Differential Oil EP for all classic and vintage higher performance classic cars. 90-GL5 £9.99 2 stroke engines, i.e. Scott, Villiers. Its ashless performance additives give Hypoid gear oil to GL5 for classic axles. Z135 Millerol M40 £30.99 minimum pre-ignition and spark plug Mineral monograde non-detergent oil for fouling, with reduced piston, exhaust Z115 Classic EP 140-GL4 £9.49 vintage engines. port and system deposits. EP gear oil to GL4 for classic transmissions (and Seagull Outboards). Z138 Classic Mini 20w50 £37.49 Z345 Assembly Lube £18.99 Contains a high concentration of antiwear Z145 Classic Sport 80w90 £14.99 Mineral oil for engines with the gearbox running in the engine oil (eg Mini). additives for initial assembly of engines Semi-Synthetic gear oil for Classic and transmissions. Transmissions. Suitable for overdrives. Exceptional cold flow properties for easier Z140 Classic Running in Oil £28.99 Running-in oil for all classic and vintage Z180 Shock Oil 32 £11.99 gear changing. engines (up to 500 miles). Use for either top-up or full fl uid replacement in shock absorbers. Z148 Green Gear Oil 140-GL1 £10.49 Z142 Classic Preservation Oil ‘Medium’ grade oil providing more Z149 Green Gear Oil 90-GL1 £10.49 £35.00 ‘sport’ handling characteristics. Mineral gear oil without EP additives for Preservation oil for the storage of vintage, Anti-wear and oxidation control additives, Vintage Applications. classic and diesel engines (can be used giving corrosion protection and low for limited mileage). foam characteristics. Z175 Classic Millermatic UN £9.49 Automatic transmission and power 20 Litre Plastic Jerry Can steering fluid. Ensures a smooth transmission of power. Very high N700 Fuel Can £57.60 resistance to oxidation and degradation. N702 19mm Spout for N700 £23.49 Suitable for use where very long service N704 28mm Spout for N700 £23.49 intervals are required. N710 Deluxe Outback Pump £82.80 Compressor and airline not included. Buy Jerry Can and Pump and SAVE £18.36 N712 Fuel Kit £122.04 Also Available: Plastic Water Can (See Workshop Section for details).

Rugged, Military Spec, Plastic Jerry Can Can carry diesel, kerosene, lubricants and other automotive fluids. The DOT approved plastic storage tank is lighter than metal cans, won’t rust or crush, meets all safety requirements and is extremely rugged. The easy-open twist cap, internal air vent, low- J380 Oil Spy £13.80 noise handling, and rapid pouring rate with Scepter’s high-flow spouts, deliver superior performance. Red/yellow cap strap identifies can as petrol/diesel. Pump not included. Test Engine Oil by With the Outback Pump, you can use any compressed air source to transfer your fluids without having to lift or hold your Scepter can!! The pickup hose has an all brass fine Monitoring its Condition mesh filter and 3 metres of petroleum resistant hose, you won’t have problems reaching One drip of warm dipstick oil on the special your tank. Jerry cans are protected from over pressurizing with a 5 psi blow off valve. Oil Spy pad will identify deficiencies and On/off nozzle works great for filling small tanks such as motorcycles, generators etc. root causes, like leaking head gasket, bad combustion, valve and carb issues. Use on vehicle, marine and plant, petrol or diesel engines. Comes in a handy tin with 26 tests M251 Copper Fuel Pipe £53.11 (6.72m, 25ft) and full instructions. 96 GLASS Order online: www.frost.co.uk

S130 Windscreen Scratch Repair Kit £25.02 S131 Extra Polishing Powder £9.71 (100g) S132 Extra Polishing Powder £32.68 (1kg) S133 Replacement Polishing Pad £15.32 S185 Windscreen Sealer Remove Scratches £7.66 (380ml) s and Sparkles S119 Large Caulking Gun £6.13 (for 310-380ml cartridges) M.O.T. regulations could mean your car will fail its inspection because of Will Not Crack or Wither a scratched windscreen. Now though, you can restore your glass with this Under the Sun’s Rays glass polishing kit and your electric drill. This amazing glass sealer is permanently Polishes away scratches caused by elastic and does not crack or wither under windscreen wipers, car washes, and UV rays; it is resistant to water, caustic even the local cat. Instructions included. washing solutions and atmospheric influences. Use between rubber profiles and body joints when fitting front and rear windscreens. Also perfect for fitting sunroofs. Does not attack chrome, paint or rubber.

J250 Miniscraper £3.06 J250B Extra Blades £1.04 (pack of 5) S190 Glass Chip Repair Kit S135 Windscreen Installation £11.23 Tool £29.50 Clear Decals and Stickers Perfect for removing unwanted stickers Repair Bullet Holes An Absolute Must! from your car windows. Supplied with five A small stone chip in your windscreen can Install rubber sealing strips easily and single edged razor blades, which safely be an irritating flaw on an otherwise well as quick as windscreen replacement retract into the metal body when not in detailed car. This handy kit has all you will specialists. Supplied with a variety of use. Hundreds of uses around the house need including thorough instructions to shapes of hooks and eyes to assemble and workshop. Excellent for cleaning paint carry out a repair in about one hour to rubber onto glass and then to insert from glass or tiles: no more need for laminated windscreen glass – actually the rubber or plastic filler strip into the masking tape. injecting resin into the chip. Replacing windscreen surround. (Not suitable for the windscreen is an expensive option metal filler strips). Simplifies standard so why not repair the damage at a installations and is a must for specials, fraction of the cost? kit cars, and customs.

D400 Plastic Headlight Polish Kit £22.98 s See Clearly Again Remove hazing and scratches from headlights, plastic lenses, boat V127 Black Rubber Paint windows, acrylic skylights, motorcycle £26.55 (250ml) windshields and fish tanks. Use mop and Autosol to remove scratches and Our old window seals can be given new finish with Plastic Polish. Kit contains life by rubbing off the perished surface mop, arbour, Autosol, microfibre cloth with wire wool and then painting them with and One Grand Plastic Polish. black liquid rubber. Fill small cracks and All you need is a drill. retain flexibility. Order line: 01706 658 619 ADDITIVES 97

Z365 VSP (E) £7.70 (250ml) Z555 Ethomix £12.00 (250ml) Z365 x10 £71.00 (Box of 10) SAVE £6.00 on 10 Bottles Protect Against the Harmful Impact of Ethanol Blended Petrol Run Smoothly on Ethanol is an alcohol renewable fuel, made from corn or grains, which Unleaded Petrol is used to oxygenate petrol fuel at the pumps. While this is good for Allows older (pre 1990 cars the environment, it is harmful to our carburettored engines. without catalyst converters) Because Ethanol is a solvent it will dissolve plastic, rubber, fibreglass and all classic and vintage and more and you are already filling up with fuel that contains ethanol. cars to run safely on Ethomix additive prevents corrosion in the fuel system and internal unleaded petrol. Now with engine components and neutralizes any acid formation. Essential for ethanol protection. nearly all pre 1996 engines including mowers, chain saws, outboards etc. • Adds up to 2 octane • Protects against gum and resin build-up and carbon deposits numbers to the base petrol • Prevents clogged carburettors, injectors, filters and fuel lines • Prevents pinking and • Quickly cleans existing gums, varnishes and carbon deposits running on • Improve drivability, increase fuel economy, restore power and reduce • Protects against valve exhaust emissions seat recession • Compatible with 2 and 4 stroke engines • Bottle treats 40 litres of fuel. • Stabilizes Ethanol-blended fuels • Bottle treats 250 litres

Z315 CVL £10.50 (250ml) Z320 EcoMax Petrol £5.80 (250ml) Z355 EcoMax Diesel £12.99 (500ml) Z315 x10 £99.00 (Box of 10) Z320 x10 £52.50 (Box of 10) Z355 x10 £114.00 (Box of 10) SAVE £6.00 on 10 Bottles SAVE £5.50 on 10 Bottles SAVE £15.90 on 10 Bottles Valve Lubricant For Petrol Engines For Diesel and Combustion Can be used for both catalyst Engines Enhancer and non-catalyst vehicles. Increases power and Add the bottle contents (250ml) mpg, reduces emissions, Enables older competition to 60 litres of unleaded petrol cleans injectors and engines to run on unleaded (premium or super). Enhances piston crowns, giving fuel without the risk of valve performance. Reduces easier starting, quieter seat recession or accelerated pinking and possibility of and smoother running. valve guide wear. 1 bottle pre-ignition and detonation Increases Cetane by of 250ml treats 20 litres by controlling the manner up to four numbers. of unleaded petrol. in which the fuel burns). One bottle treats CVL uses the same Improves fuel consumption 10 tanks of fuel. proven manganese and gives smoother Suitable for all based chemistry as running. diesel engines, Millers VSP Plus, with including those an improvement up to with particulate three octane, dependant Z332 ZDDP Anti Wear Oil filters. on the base fuel used. Complies with both Additive £9.99 (113g) MSA and FIA regulations. Oils are Z340 Tank Safe £8.90 (250ml) Changing – Rust Free! Z130 Redex £6.30 Protect Moving High quality gasoline additive (250ml) Parts in Your Classic Engine providing anti corrosion Reduce Exhaust protection and vapour phase The phosphorous content inhibition. By addition to the Emissions and of ZDDP (Zinc Dialkyl Dithio fuel tank contents at the end Restore Phosphate) and its ash, of season “lay up” will Performance has a detrimental effect on provide fuel tank and catalytic emission systems. fuel system protection Removes carburettor and This has led to new oils whilst being stored. inlet deposits, carbon, gum being developed which have reduced Very economical and varnish. Reduces cold levels of ZDDP. These new oils may cause treatment rates. start wear as well as serious problems in a classic engine. Add one bottle to corrosion in the fuel tank, Add one bottle of ZDDP at each oil change tank contents and pump and pipes. 250ml to protect the gears, cam and followers temporarily block any bottle treats 100 litres and add life to your engine. open fuel breathers for of fuel. maximum efficiency. Note: Millers Classic Oils still contain sufficient ZDDP. 98 TANKS Order online: www.frost.co.uk

Prep & Ready S205 £17.00 (946ml, US Quart) S206 £28.95 (3.78 litres, US Gallon)

Prevent Further Rusting Removes surface rust, etches metal and leaves a Zinc Phosphate coating, which prevents further rusting. Non-toxic, non- flammable and non-corrosive, it ensures perfect paint adhesion and gives better welding conductivity. It can be brushed on, sprayed on with the trigger head provided or alternatively immerse rusted parts to bring them up like new.

S231 Fuel Preservative and Stabilizer £13.50 (473ml, US Pint)

New Fuels Don’t Keep! If your car sits for two months or more gums and varnishes start to form due to oxidation of the fuel. Combustibility is reduced, as is octane value and overall efficiency. Fuel lines, nozzles Marine Clean Fuel Tank Sealer and jets, get clogged. When you add S204 £10.25 (946ml, US Quart) S201 £11.82 (236ml, 8oz) Fuel Preservative to your tank, oxygen S203 £19.95 (3.78 litres, US Gallon) will seal a 4-½ Gal tank (17 litres) is chemically isolated (preventing S202 £19.96 (473ml, US Pint) oxidation) and corrosive compounds will seal a 9 Gal tank (34 litres) are neutralised (stopping rust Clean and Degrease formation). Contains NO alcohol. S200 (946ml, US Quart) in One Step £28.50 Use 30ml per 11.34 litres for normal will seal a 18 Gal tank (68 litres) Cleans and degreases in one application maintenance, or 30ml per 3.78 litres to without leaving residues, noxious fumes thoroughly clean your fuel system. or flammable solvents. Dilute with hot Stop Corrosion Keeps Petrol or Diesel fresh for two water to remove grease, oil and petrol Totally resistant to all fuels, alcohols and years or more. Bottle treats 35 gallons. deposits in engine bay and tanks. petrol additives. Seals leaking seams, Great for removing mildew, algae, musty cracks and pinholes stopping all further odours, soap films, wax and staining corrosion dead in its tracks. All tanks More POR-15 Products from all surfaces, including canvas, need pre-treating with Marine Clean in the Painting Section vinyl and nylon. and Prep & Ready.

POSTAGE & PACKING Note: Products with a ‘Y’ code are TO ORDER BY PHONE ANY QUERIES? subject to extra shipping charges. Standard service up to 30 kilos An answerphone is available for Call 01706 658 619 and one of our Europe: you to leave your order outside the staff will be pleased to help. GB MAINLAND: Czech Republic, Finland, Gibraltar, opening hours. Please give your Parcel Force Standard Service Hungary, Liechtenstein, Malta, name, address, postcode, order code RETURN OR EXCHANGE Norway, Poland, Portugal, and quantities, followed by your Orders over £75 FREE San Marino, Slovakia, Slovenia, credit card number and expiry date. Pack well and return to us with a Switzerland, Sweden, note of your requirements and the Orders less than £75 £6.25 £38.50 TO ORDER BY POST OR FAX original invoice number. Express Service (1-2 Days) £7.95 Belgium, Eire, France, Germany, Luxembourg, Netherlands £22.00 Please complete the order form PRICES Saturday Morning £12.95 (see opposite) and either fax it Austria, Denmark £35.00 All prices include VAT at 20%. Usually the next working day with through, or post it. Italy, Spain £31.00 Goods will be charged at current the exception of some outlying PAYMENT VAT rates. If goods are delivered areas of the mainland and UK isles. Anywhere else and items with ‘Y’ outside the EEC, then the VAT will please ask for quotation. Surcharges may apply to some code Use your card to order or make be deducted. areas. SHIPPING RESTRICTION cheques payable to Frost A.R.T. Ltd. Northern Ireland and UK Isles: Please be advised that due to RECEIPT OF GOODS regulations we can only send DESPATCH Standard Delivery Northern Ireland Normally a signature will be Aerosol products, certain chemicals We normally despatch items within required. £15.95 and liquids by surface mail, and only 24 hours of receipt of your order. Scottish Highlands + Islands £13.50 to the following countries: Austria, If an item is out of stock, it will Denmark, Eire, Italy, Spain, Belgium, be marked “backorder” on your Isles of Man, Scilly Isles France, Germany, Luxemburg, acknowledgement and sent out Channel Islands £16.95 Netherlands, Portugal. as soon as it is available. www.frost.co.uk SPRING TIME If you wish to place and SPECIAL OFFER Order and benefit from this SIGN UP FOR AMAZING Offer don’t forget to quote PRIZE DRAW TO WIN A the promotion code below MIG175 WELDER* 1232M worth £349.00 Competition Ends 18/06/12

WITH ANY ORDER Winner will be annouced on PLACED OVER £40.00 www.frost.co.uk on 19/06/12 GB Mainland Orders Only and other Frost Social Channels See Page 11 (FB, Twitter, Blog) *Only one discount can be applied to an order. for more information on Terms and Conditions can be Limited to one order per customer. this fantastic product. viewed on website

ORDER FORM Volume: 58 FREE P&P FOR ORDERS OVER £75.00 DELIVERY DETAILS

COMPANY TELEPHONE NO.

SURNAME FIRST NAME

ADDRESS

POSTCODE E-MAIL

Quantity Catalogue No. Description Colour Price Each Total Price Including VAT Including VAT

GB Mainland only £6.25 Parcel Force Standard Service* FREE P&P for orders over £75* POSTAGE GB Mainland £7.95 Express Service (1-2 days, excluding Weekends)* orders over £12.95 Saturday Morning* £75 FREE* Northern Ireland Please see details page 98 and UK Isles * Overseas Please see details page 98* TOTAL *except product codes prefixed with a ‘Y’ code. (Please contact us for a postage and packing price)

Payment by: CASH CHEQUE P.O VISA VISA ELECTRON AMEX (Please tick) Promo Code MAESTRO (SWITCH) EUROCARD MASTERCARD 1232M

Credit/Debit Card No. Month Year

Start Date

Signature...... Date Month Year

Expiry Date

(I am over 18 years old) Issue Number We may make names and addresses from our mailing list available to other reputable companies whose products may be of interest to you. If you don't wish to receive such mailings, please tick this box. All prices and offers in Volume 58 supersede any prices or offers previously published in any Frost catalogue. (Maestro (Switch) Only) Prices and descriptions are correct at the time of going to press, however Frost reserves the right to alter specifications and prices without prior notice. Once completed, please post to : FROST AUTO RESTORATION TECHNIQUES LTD Crawford Street, Rochdale, Lancashire OL16 5NU, England. Tel: 01706 658 619 www.frost.co.uk Fax: 01706 860 338 e-mail: [email protected] Company Reg. No. 1936145 VAT Reg. No. 425 7873 24

100 TANKS When placing an Order please quote code: 1232M2P

Seal a Fuel Tank?

ORDER LINE 01706 658 619 Lines Open 8.30am - 5.00pm Monday to Friday

ORDER ONLINE www.frost.co.uk by e-mail: [email protected] by fax: 01706 860 338 by post: send your completed order form to: Frost ART, Crawford Street, Rochdale Lancs OL16 5NU, UK

S208 Fuel Tank Repair Kit £60.26 Customer No

Seals Tanks Against Fuels Containing Ethanol A leaking petrol tank can be lethal, welding a tank is suicidal. The POR-15 Fuel Tank Repair Kit restores your tank to “as good as new”. Return Address: Frost ART Ltd, Cr 1. Use Marine Clean to remove any old fuel residues and contaminating deposits in your tank The car tank kit contains: 2. Remove rust and etch the metal surface • 1x S204 Marine Clean (946ml) of the tank with Prep & Ready (formally • 1x S205 Prep & Ready (946ml) Metal Ready) • 1x S200 Petrol Tank Sealer (946ml) 3. Once the surface has completely dried, • 1x S231 Fuel Preservative (473ml) awford Street, Rochdale, Lancashire OL16 5NU, England pour in Fuel Tank Sealer, roll the tank so NOTE: Kits not suitable for plastic and fibreglass tanks. the sealer covers the entire inside surface, this plugs any leaks and ensure no more rust will be sucked into the S215 Motorcycle Fuel Tank carburettor 4. With the tank back on the vehicle, add Repair Kit £38.50 the Fuel Preservative and Stabilizer to For more information see the fuel, which improves the life of your Motorcycle Essentials Section petrol and keeps the tank clean. page 64

Z600 POR-15 E test Kit £19.90 .

Know How Much Ethanol is in Your Fuel Ethanol in your fuel reduces power and causes water absorption which leads to corrosion in your tank. It can reduce fuel efficiency and mileage up to 5%. Simply and accurately check the percentage of ethanol content in your pump petrol with our kit. Test your fuel before each fill up. Kit contains: Fuel-Test Tube with Stand, Rubber Plug, E-Dye, Fuel Dispensing Bottle, Gloves, Instructions.