sign in sign up
<<
Home , English wheel, Panel beater, Soldering iron

"SHAPEIT" INTRODUCTORY -BAG KITS 17 UNDER $100.00

Shapeit-9 Shapeit-10 Shapeit-12 • 3PC-Includes: • 3PC-Includes: • 3PC-Includes: (1) DSBM12D, 2 ½” diameter Std Series (1) DBW13, 3” diameter Hardwood (1) DBM03D. 3” diameter Jumbo Reach Plastic Bossing Mallet Barrel/Bossing Mallet Plastic Bossing Mallet (1) SB12, Leather Shot Bag 12” diameter (1) SB12, Leather Shot Bag 12” diameter (1) SB-12, Leather Shot Bag 12” diameter (1) SB12-Fill, Sand Bag Filler-12lbs (1) SB12-Fill, Sand Bag Filler-12lbs (1) SB12-Fill, Sand Bag Filler-12lbs • Buy as a kit and save • Buy as a kit and save • Buy as a kit and save • 13.9 lbs weight • 14.9 lbs weight • 15.4 lbs weight UNDER $200.00

Shapeit-3 Shapeit-4 Shapeit-5 • 5PC- Includes: • 4PC-Includes: • 4PC-Includes: (1) DBSM11D, 2” diameter Std Series (1) DBM02D, 2” diameter Jumbo Reach (1) DSBM11D, 2” diameter Std Series Plastic Bossing Mallet Plastic Bossing Mallet Plastic Bossing Mallet (1) DBM02D, 2 ½” diameter Jumbo (1) SLP-3, Flat Faced Hardwood Slapper (1) DBW13, 3” diameter Hardwood Reach Plastic Bossing Mallet (1) SB12, Leather Shot Bag 12” diameter Barrel/Bossing Mallet (1) SLP-3, Flat Faced Hardwood Slapper (1) SB12-Fill, Sand Bag Filler-12lbs (1) SLP-3, Flat Faced Hardwood Slapper (1) SB12, Leather Shot Bag 12” diameter • Buy as a kit and save (1) SB12, Leather Shot Bag 12” diameter (1) SB12-Fill, Sand Bag Filler-12lbs • 17 lbs weight (1) SB12-Fill, Sand Bag Filler-12Lbs • Buy as a kit and save • Buy as a kit and save • 18.9 lbs weight • 15.4 lbs weight

Shapeit-6 Shapeit-7 Shapeit-8 • 4PC-Includes: • 4PC-Includes: (1) DBSM11D, 2” diam- • 4PC-Includes: (1) SLP-3 Flat Faced Hardwood Slapper eter Std Series Plastic Bossing Mallet (1) DBW13, 3” diameter Hardwood (1) DT2566, Crowned Faced-Pick Panel (1) DBM02D, 2 ½” diameter Jumbo Barrel/Bossing Mallet Beater Hammer Reach Plastic Bossing Mallet (1) SLP-3, Flat Faced Hardwood Slapper (1) PD001, Half-Football Handle Dolly (1) SB12, Leather Shot Bag 12” diameter (1) SB12, Leather Shot Bag 12” diameter (1) CP555, Style Handle Dolly (1) SB12-Fill, Sand Bag Filler-12 lbs (1) SB12-Fill, Sand Bag Filler-12lbs • Buy as a kit and save • Buy as a kit and save • Buy as a kit and save • 11.6 lbs weight • 16.0 lbs weight • 16.9 lbs weight

www.daggertools.com 248.735.1123 "SHAPEIT" INTRODUCTORY HAMMER-BAG KITS 18 UNDER $350.00

Shapeit-1 Shapeit-2 • 10PC-Includes: • 9PC-Includes: (1) DSBM11D, 2” diameter Std Series Plastic Bossing Mallet (1) DBW12, 2 3/8” diameter Pear Shaped Hardwood (1) DBM02D, 2 ½” diameter Jumbo Reach Plastic Bossing Mallet Bossing Mallet (1) DPBRM3, 3” diameter Barrel/Bossing Plastic Mallet (1) DBW13, 3” diameter Hardwood Barrel/Bossing Mallet (1) SLP-3, Flat Faced Hardwood Slapper (1) SLP-3, Flat Faced Hardwood Slapper (1) DT2566, Crowned Faced-Pick Panel Beater Hammer (1) DT2566, Crowned Faced-Pick Panel Beater Hammer (1) CP548, Thin Toe Hand Dolly (1) CP548, Thin Toe Hand Dolly (1) DSEF4560, 45°-2 ¼” wide Seamer/Folder (1) DSEF4560, 45°-2 ¼” wide Seamer/Folder Pliers (1) SB12, Leather Shot Bag 12” diameter (1) SB12, Leather Shot Bag 12” diameter (1) SB-Fill, Sand Bag Fill-12lbs (1) SB-Fill, Sand Bag Fill-12lbs (1 BK-1358, Ultimate Fabrication Book (1) BK-1358, Ultimate Sheet Book • Buy as a kit and save • 26.8 lbs weight

MIXED HAMMER KITS

UNDER $150.00

DAM-1 DAM-2 • 3PC- Includes: • 3PC- Includes: (1) DSBM12D, 2 ½” diameter Std Series Plastic Bossing Mallet (1) DBW22, 2 3/8” diameter Wood Pear Shaped Bossing Mallet (1) DBM02D, 2 ½” diameter Jumbo Reach Plastic Bossing Mallet (1 DPBRM2, 2 ½” diameter Barrel/Bossing Plastic Mallet (1) DBW13, 3” diameter Hardwood Barrel/Bossing Mallet (1) DBM03D, 3” diameter Jumbo Reach Plastic Bossing Mallet • Buy as a kit and save • Buy as a kit and save • 3.9 lbs weight • 4.5 lbs weight

DAM-3 DBWA-KIT • 4PC- Includes: • 3PC- Includes: (1) DSBM11D, 2” diameter Std Series Plastic Bossing Mallet (1) DBW22, 2 3/8” diameter Wood Pear Shaped Bossing Mallet (1) DPBRM2, 2 ½” diameter Barrel/Bossing Plastic Mallet (1) DBW23, 3 1/8” diameter Wood Bossing/Wedge Mallet (1) DBM02D, 2 ½” diameter Jumbo Reach Plastic Bossing Mallet (1) DBW13, 3” diameter Hardwood Barrel/Bossing Mallet (1) DBW13, 3” diameter Hardwood Barrel/ Bossing Mallet • Buy as a kit and save • Buy as a kit and save • 3.8 lbs weight • 4.9 lbs weight www.daggertools.com 248.735.1123 ENGLISH WHEEL AND RAISING MACHINE 19

1 5

WHEEL & RAISING MACHINE 2 DTNR-2027 Dagger & Northridge have partnered in the design and construction of this newest generation English wheel & raising machine. Our DTNR-2027 machine offers improved part access, deeper lower post reach and increased inside of frame clearance. 27 1/2” Foot activated wheel pressure adjuster 24” 3 allows you to compensate while an infinite level of surface pressures. Allowing control of surface stretching and finishing. Unique upper wheel 1 built-in quick release on quick release feature allows you to 60 1/2” visually line up your panel with a high upper wheel level of accuracy each time you remove 2 Upper & lower wheel from machine to check to buck or assemblies can be turned pattern. 90° in seconds to allow larger panel work Included: 3 Very slim lower anvil wheel • 2” (W) X 6”(D) Upper wheel casing with extra deep reach 25 1/2” (Hardened, roller bearings), Lower for access into much smaller anvil wheels (roller bearings) 2” (W) assemblies X 3” (D), 6 sizes: flat, 2-4-6-10-12” 4 Ergonomically positioned radius foot activated pressure • Precision aligned, tubular steel frame, adjuster 34 1/2” 4 reinforced 5 Anvil wheel storage points • Operation manual • 16 mild steel capacity • 280 lbs (must ship motor freight) We offer Wheel Kits! Call for details. WHEEL & RAISING MACHINE DTREW-22 (22” throat reach, 825 lbs) DTREW-36 (36” throat reach, 1250 lbs)

Trident Tool offers a premier professional quality, English wheel & raising machine. Solid cast iron construction (providing the most rigid frame of any machine offered today) for maximum material capacity. More than that it’s classified as a “Dead Feel” design allowing the operator to experience a feel of the metal flow that occurs while rolling. These wheels are robust and a great long-term investment for the shop and fabricator, and will hold their market value. All moving surfaces are bushed or ball bearing supported, upper wheel is axle mounted to the frame to allow hand crank movement by extra person for very close/tight bead rolling or very complex shapes. Lower anvil wheel quick release, foot activated pressure adjuster and anvil wheel storage shelf are included standard.

Included: • 3” (W) X 9” (D) Upper wheel (roller bearings), (3) Lower anvil wheels (roller bearings) 3’ (W) X 3” (D), 4 sizes: flat, 3- 6-12” radius • Requires some assembly (shipped motor freight) • 10 gauge mild steel capacitiy

www.daggertools.com 248.735.1123 rawhide & mallets 20

Rawhide & copper mallets Head Overall Head Handle Rawhide leather mallets are non-marring tot he metal and Model No. Diameter Length Length Weight are effective for cold shrinking or traditional tuck shrinking, drmo 1-3/4" 3-3/8" 11" .7 lbs observe the rule of "soft to hard" or "hard to soft" simply drm11 2" 3-1/2" 11" 1 lbs. stated is the driving tool can be a rawhide, wood or leather boot covered panel beater or softer surface against a steel dolly drm125 2-3/4" 4-1/2" 13-1/2" 1.5 lbs. or plate. This can also be reversed with similar results. That's where the treated rawhide leather excels. It last a long time and can be reshaped easily. The combo offer a higher drm125 head weight and can have either side head changed to create a preferred combination of rawhide and/or copper. Copper face combo hammers also are the safest way to strike a panel beater drmo hammer against a metal surface with additional force with dam- drm11 age to the panel beater.

Head Head Overall Head Handle Model No. Composition Diameter Length Length Weight drcho Rawhide/Copper 1-1/2" 4-1/4" 11" 2.2 lbs. dcho Copper/Copper 1-1/2" 4-1/4" 11" 2.9 lbs. Replacement faces for combo hammers: drch-rh Rawhide 1-1/2"D x 1-1/2"L dcho drch-CO Copper 1-1/2"D x 1"L

drcho leather facings for hammers & dollies These facings are secured to your panel beater or hand dolly. They eliminate the marring of the metal surface but are suc- cessfully used for softening the impact of steel hammer or dolly on metal surfaces. Especially useful while cold shrinking and removing dents without damaging paint. Made from two ply wood wedges layers of leather with a cloth boot sandwiched and sewn Wood wedges are often called hammer or roping tools. together. Simply tie on the boot with a drawstring provided. Provide a mar free surface that can be easily shaped to fit a contour or surface made from Aspen for durability. Panel Beater Types: dthlf001 For 1-1/4" – 1-1/2" hammer faces .02 lbs. hfw1 3-1/2" wide blade x 8-1/2" O.A.L. .4 lbs. dthlf002 For 1-3/4" – 2" hammer faces .03 lbs. hfw2 2-3/8" wide blade x 7" O.A.L. .2 lbs. Hand Dolly Types: dthlf004 For Universal style hand dollies: 2-3/4"W x 3-1/4"L dthlf005 For Universal style hand dollies: 3-1/4"W x 2-1/2"L

HFW2 dthlf004

HFW1

dthlf001

www.daggertools.com 248.735.1123 planishing hammers & dies 21 Air Planishing Hammers are primarily are for panel . Like the English Wheel; planishing hammers with a percussion cylinder that hits in a controlled manor against a lower anvil to finely smooth out a rough shaped panel our repair a damaged sur- face. The planishing hammer is different than the wheeling machine in that it can reach into much smaller areas and contours with similar results. Having pressure controls in both the variable speed of the air motor and manually via adjusting the surface contact pressures between the upper & lower die excess stretching of the panel area can be minimized. 30" 26" air planishing hammer-bench/floor type 26” machine, bench mount, 82 lbs. (ship motor freight) dt10051NP 24" dt10050NP 26” machine, with optional floor stand, 128lbs. (ship motor freight) 30" 26" dt10051ST Stand only, for DT10051NP machine, 44 lbs. • 26” throat reach X 24” inside gap height. • Extra long adjustable lower anvil post assembly for reach into very deep parts • 0-4000 bpm pneumatic motor, with variable speed control foot pedal 58" • Includes: (1) ea upper die (flat), (4) lower : flat-low-med-high crown all dies are heat treated and tool steel • Rectangular tube frame 2 x 3” with gusseted frame corners: 16ga mild steel & 1/8” aluminum capacity • Will accept original shank style CP type lower anvil dies • Built by Northridge Tools 34-1/2" 25"

26" air planishing hammer-bench type dt10042NP 26” machine, bench mount, 42 lbs. dt10042ST Stand only, for DT10042NP machine, 38 lbs. • 26” throat reach X 17” 14” inside gap height • Long reach adjustable lower anvil post assembly for reach into deep parts 26" • 0-4000 bpm pneumatic motor, with variable speed control foot pedal 15" • Includes: (1) ea upper die (flat), (4) lower anvils: flat-low-med-high crown all dies are heat treated and tool steel • tube frame 2 x 2”: 16ga mild steel, 1/8” aluminum capacity • Will accept original shank CP type lower anvil dies • Built by Northridge Tools planishing hammer dies & cylinder planishing hammer parts components - cp style 74365CP Type 2 Long Cylinder assembly Build your own CP style-planishing hammer or just need replacement dies. Upper and complete (does not include hammer case, lower dies/anvils are heat treated and manufactured from “S” series tool steel. return spring & exhaust deflector) 74363CP Type 2 Long Cylinder hammer polished Upper dies case (for new construction or retrofit) 74368CP Return Spring (not shown) 70528EH Exhaust Deflector (not shown)

528-D3 528-D7 528-D15 528-D20 74365cP lower anvil dies

528-D1 528-D2 528-D4 528-D8 528-D9 528-D12 528-D17 528-D19 528-D13 528-D26

74363cp www.daggertools.com 248.735.1123 layout tools Dividers - Heavy duty magnetic carbide • Square leg design for maximum point scribe stiffness dL07 • Knurl nut positive lock mechanism • For scribing lines on most • Forged steel materials • Dual points- #2 pencil holder • Carbide tip on end and optional “p” type magnet other end without pencil holder with pencil holder • Pocket clip • 5-3/4" length Leg Length Leg Length • .2 oz. Model No. (Useable) Weight Model No. (Useable) Weight DL01-6 6" .4 lbs. DL01P-6 6" .45 lbs. Utility and dl01 12" .9 lbs. dl01P 12" 1 lbs. dL12 dl01-24 24" 3 lbs. dl01P-24 24" 3.12 lbs. • Ideal for holes in sheet metal PRECISION BEAM TRAMMEL SET • Scriber tip made of H.S.S and dL10 hardened • Hexagonal grip body • Will create up to a 26” circle diameter • 7-1/2” length • Selection of straight & offset hardened & • .2 lbs. ground points included • Unique fine adjuster built-in to allow very fine adjustment for most challenging layouts • 14-1/2” O.A.L • 1.3 lbs edge scribe marketing tool TRAMMEL POINT SET dL03 dL06 • Pull a scribe line on any sheet from 1/4” to • 2pc set for layout of circles, arcs, and 4-3/4” depths templates on alloy sheet or paper. • construction • Will clamp up to a 1-1/4” thick • 6” length material for the beam • .4 oz • Both sides have hardened & ground points- one side will also accept a #2 pencil • .4 lbs center punch set dL04 universal transfer punch • 6pc set included sizes: 1/16-3/32-1/8-5/32-3/16 punches dL05 • Square head style, knurled shaft, • For locating center of countersunk holes. made of tool steel-hardened Light strike of the punch marks the • Storage pouch material • .5 oz • Spring loaded locater body, hardened punch machinist style scribe set • Go for 3/16-5/8” hole sizes dL08 • .2 lbs • 3pc set included: -double hook-single point HD styles • Hardened tool steel construction • Storage pouch • .5 lbs

www.daggertools.com 248.735.1123 MICRO TORCHES 16

Gas Adjustment Air Adjustment Dial (on back) Ring Ignition Button

Safety Switch S14T (Child Resistant Latch) Continuous Flame Button

S2T

Gas Valve (on bottom)

MICRO TORCH Overall Max. Temp. Tank Burn MT SERIES Model No. Height Temp. ( iron) Size Time Weight MT7705 6" 1300˚C/ 200-450˚C/ 94 ml. 60-70 min. .40 lbs. Our micro torches are ergonomically 2450˚F 390-840˚F designed with a grip for comfort and control, piezo electronic ignition, high Also available: impact molded housing and meets CPSC S2T SS steel hot air controlled soldering tip, 2-3/4" OAL safety requirements. Can be used for S14T SS steel hot air blower tube, 5-1/2" OAL and shrink tubing deflector soldering, , , wire 7/16" radius soldering, silver brazing and shrink tubing installation. Unique base design allows hands-free table top use. Air/flame control settings are fully adjustable and conveniently located, both air and gas flow metering. • Use butane fuel only! • Easy, one-hand thumb safety start ignition button • Meets safety standards for multi- purpose lighters (16 C.F.R. and 1212.17b) of the U.S. Consumers Product Safety Commission (CPSC) • Optional soldering tip (S2T) and shrink tubing hot blower (S14T)

www.daggertools.com 248.735.1123 AIR MARKING PEN 17

AIR MARKING PEN Overall Blows Per Air Inlet PA SERIES Model No. Length (Pen) Weight Minute Size CFM

Pneumatic powered marking pen with PA321 5" 5 oz. 13,500 1/8" 1 carbide tipped styles. Can write or identify on a variety of materials, such as Also available: steel, up to RC-64, glass, plastic and DT7177 Replacement Carbide Tipped Stylus wood. Air pens can also do deburring, DT7425 Four (4) Piece Chisel Kit includes: 1/4" flat chisel, round nose chisel, trimming, weld clean-up and is an chisel blank and anvil excellent tool for removing broken studs. • Lightweight machined aluminum housing with hardened steel piston • Adjustable throttle that allows control over the depth of the marking • Removable carbide tipped stylus that allows tool to be converted to chisel type scaler, deburring tool with optional # DT7425 chisel kit • Includes 5' of 1/8" I.D. air line, air filter assembly and molded storage case

www.daggertools.com 248.735.1123