SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2003

DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E RMT-831

SERVICE MANUAL LEVEL 2 US Model Ver 1.0 2003. 12 DCR-TRV360/TRV460 Revision History Canadian Model DCR-TRV460 AEP Model How to use UK Model Acrobat Reader East European Model North European Model Australian Model DCR-TRV460E E Model DCR-TRV361/TRV460/TRV460E/TRV461E

M2000/M2200 MECHANISM Photo: DCR-TRV460

Link

SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS

SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REPAIR PARTS LIST

DISASSEMBLY SCHEMATIC DIAGRAMS

¥For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987629351.pdf). ¥For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL1 (987629341.pdf). ¥For MECHANISM ADJUSTMENTS, refer to the “8mm Video MECHANICAL ADJUSTMENT MANUAL IX M2000 MECHANISM ” (9-929-861-11). ¥ Reference No. search on printed wiring boards is available. ¥Table for differences of function of each model. ¥TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT) ¥ HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown. On the VC-345 board This service manual provides the information that is premised the circuit board replacement service and not intended repair inside the VC-345 board. Therefore, schematic diagrams, printed wiring boards, mounted parts location and electrical parts list of the VC-345 board are not shown. The following pages are not shown. Schematic diagrams ...... Pages 4-9 to 4-44 Mounted parts location ...... Pages 4-69 and 4-70 Printed wiring boards ...... Pages 4-59 to 4-62 Electrical parts list ...... Pages 5-16 to 5-24 DIGITAL VIDEO CAMERA RECORDER DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

TM SERIES

SPECIFICATIONS

Focal length Supplied accessories Video camera recorder 2.5 - 50 mm (1/8 - 2 in.) Memory Stick 8MB (1) When converted to a 35 mm still camera (DCR-TRV361/TRV461E) In CAMERA-TAPE: AC Adaptor (1) 42 - 840 mm (1 11/16 - 33 1/8 in.) Power cord (1) System In CAMERA-MEMORY: Lens cap (1) 42 - 840 mm (1 11/16 - 33 1/8 in.) Shoulder strap (1) Video recording system Color temperature Wireless Remote commander RMT-831 (1) 2 rotary heads, Helical scanning system Auto A/V connecting cable (1) Still image recording system Minimum illumination USB cable (1) Exif Ver. 2.2*1 4 lx (lux) (F 1.6) Rechargeable battery pack NP-FM30 (1) *1 Exif is a file format for still images, 0 lx (lux) (during the NightShot plus CD-ROM SPVD-012 USB Driver (1) established by the JEITA (Japan function)*2 21-pin adaptor (1) Electronics and Information Technology *2 Objects unable to be seen due to the dark can (AEP, UK, EE) Industries Association). Files in this format be shot with infrared lighting. Camera Operations Guide (1) can have additional information such as Computer Applications Guide (1) your camcorder s setting information at the Input/Output connectors See page 7. time of recording. S video input/output Audio recording system Luminance signal: 1 Vp-p, 75 Ω (ohms), AC Adaptor AC-L15A/L15B Rotary heads, PCM system unbalanced Quantization: 12 bits (Fs 32 kHz, stereo 1, Power requirements Chrominance signal: AC 100 - 240 V, 50/60 Hz stereo 2), 16 bits (Fs 48 kHz, stereo) DCR-TRV360/TRV361/TRV460: 0.286 Vp-p Video signal Current consumption DCR-TRV460E/TRV461E: 0.3 Vp-p DCR-TRV360/TRV361/TRV460: 0.35 - 0.18 A 75 Ω (ohms), unbalanced NTSC color, EIA standards Power consumption 4-pin mini DIN DCR-TRV460E/TRV461E: 18 W Audio/Video input/output Output voltage PAL color, CCIR standards AV MINIJACK Usable cassette DC 8.4 V, 1.5 A Video signal: 1 Vp-p, 75 Ω (ohms), 8 mm video format cassette Operating temperature unbalanced, sync negative Tape speed 0° C to 40° C (32° F to 104° F) Audio signal: 327 mV (at output impedance DCR-TRV360/TRV361/TRV460: Storage temperature more than 47 kΩ (kilohms)), Input impedance SP: Approx. 28.67 mm/s -20° C to + 60° C (-4° F to + 140° F) more than 47 kΩ (kilohms), Output impedance LP: Approx. 19.11 mm/s Dimensions (approx.) with less than 2.2 kΩ (kilohms) DCR-TRV460E/TRV461E: 56 × 31 × 100 mm (2 1/4 × 1 1/4 × 4 in.) (w/h/ Stereo minijack (φ 3.5mm) d) excluding the projecting parts SP: Approx. 28.70 mm/s DV input/output Mass (approx.) LP: Approx. 19.13 mm/s 4-pin connector 190 g (6.7 oz) excluding the power cord Recording/play back time USB jack DCR-TRV360/TRV361/TRV460: mini-B (using 120 min. Hi8/Digital8 video cassette) Rechargeable battery pack (NP-FM30) DCR-TRV460E/TRV461E: LCD screen Maximum output voltage (using 90 min. Hi8/Digital8 video cassette) Picture DC 8.4 V SP: 60 min 6.2 cm (2.5 type) Output voltage LP: 90 min Total dot number DC 7.2 V Fast forward/rewind time 123 200 (560 × 220) Capacity DCR-TRV360/TRV361/TRV460: 5.0 Wh (700 mAh) (using 120 min. Hi8/Digital8 video cassette) General Dimensions (approx.) DCR-TRV460E/TRV461E: Power requirements 38.2 × 20.5 × 55.6 mm (using 90 min. Hi8/Digital8 video cassette) DC 7.2 V (battery pack) (1 9/16 × 1 3/16 × 2 1/4 in.) (w/h/d) Approx. 5 min DC 8.4 V (AC Adaptor) Mass (approx.) Viewfinder Average power consumption (when using the 65 g (2.3 oz) Electric viewfinder (monochrome) battery pack) Operating temperature Image device During camera recording using the viewfinder 0° C to 40° C (32° F to 104° F) 3.0 mm (1/6 type) CCD (Charge Coupled 2.9 W Type Device) During camera recording using the LCD Lithium ion DCR-TRV360/TRV361/TRV460: 3.8 W Design and specifications are subject to change Gross: Approx. 460 000 pixels Operating temperature without notice. Effective (still): Approx. 290 000 pixels 0° C to 40° C (32° F to 104° F) Effective (movie): Approx. 290 000 pixels Storage temperature DCR-TRV460E/TRV461E: -20° C to + 60° C (-4° F to + 140° F) Gross: Approx. 540 000 pixels Dimensions (approx.) Effective (still): Approx. 350 000 pixels 85 × 98 × 151 mm (3 3/8 × 3 7/8 × 6 in.) Effective (movie): Approx. 350 000 pixels (w/h/d) Lens Mass (Approx.) Combined power zoom lens 800 g (1 lb 12 oz) main unit only Filter diameter: 37 mm (1 7/16 in.) 940 g (2 lb 1 oz) including the NP-FM30 20 × (Optical), 990 × (Digital) rechargeable battery pack, Hi8/Digital8 F = 1.6 ~ 2.4 cassette, lens cap, and shoulder strap.

— 2 — DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

Table for differences of function Model DCR-TRV360 DCR-TRV361 DCR-TRV460 DCR-TRV460E DCR-TRV461E AEP, UK, EE Destination US E US, CND, E E NE, E, AUS Color system NTSC NTSC NTSC PAL PAL Playback system Digital8 Digital8 Hi8/8/Digital8 Hi8/8/Digital8 Hi8/8/Digital8 Mechanism deck M2200 M2200 M2000 M2000 M2000

¥Abbreviation AUS: Australian model EE : East European model CND : Canadian model NE : North European model

SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIéCES SONT LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIéSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer.

1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder connections. Check the entire board surface for solder splashes Boards requiring use of unleaded solder are printed with the lead- and bridges. free mark (LF) indicating the solder contains no lead. 2. Check the interboard wiring to ensure that no wires are (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) "pinched" or contact high-wattage resistors. 3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point : LEAD FREE MARK them out to the customer and recommend their replacement. Unleaded solder has the following characteristics. 4. Look for parts which, through functioning, show obvious signs ¥ Unleaded solder melts at a temperature about 40°C higher than of deterioration. Point them out to the customer and ordinary solder. recommend their replacement. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. 5. Check the B+ voltage to see it is at the values specified. Soldering irons using a temperature regulator should be set to 6. Flexible Circuit Board Repairing about 350°C. ¥Keep the temperature of the soldering iron around 270ûC Caution: The printed pattern (copper foil) may peel away if the during repairing. heated tip is applied for too long, so be careful! ¥ Do not touch the soldering iron on the same conductor of the ¥ Strong viscosity circuit board (within 3 times). Unleaded solder is more viscous (sticky, less prone to flow) than ¥ Be careful not to apply force on the conductor when soldering ordinary solder so use caution not to let solder bridges occur such or unsoldering. as on IC pins, etc. ¥ Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. — 3 — DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

TABLE OF CONTENTS Section Title Page Section Title Page 1. SERVICE NOTE 5. REPAIR PARTS LIST 1-1. Note for Repair áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá1-1 5-1. Exploded Views áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-2 1-2. Power Supply During Repairs ááááááááááááááááááááááááááááááááááááááááá1-1 5-1-1. Overall Assembly áááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-2 1-3. To Take Out a Cassette when not Eject (Force Eject) ááááá1-2 5-1-2. Front Panel Block ááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-3 1-4. Self-diagnosis Function ááááááááááááááááááááááááááááááááááááááááááááááááááá 1-3 5-1-3. Lens Block áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-4 1-4-1.Self-diagnosis Function ááááááááááááááááááááááááááááááááááááááááááááááááááá 1-3 5-1-4. LCD Block áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-5 1-4-2.Self-diagnosis Display ááááááááááááááááááááááááááááááááááááááááááááááááááááá1-3 5-1-5. Cabinet R Block áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-6 1-4-3.Self-diagnosis Code Table ááááááááááááááááááááááááááááááááááááááááááááááá 1-4 5-1-6. EVF Block áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-7 5-1-7. Battery Panel Block áááááááááááááááááááááááááááááááááááááááááááááááááááááá5-8 5-1-8. MD Frame Block áááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-9 2. DISASSEMBLY 5-1-9. Cassette Compartment Assembly, Drum Assembly ááá5-10 2-1. Flow Chart ááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá 2-1 5-1-10. LS Chassis Block Assembly ááááááááááááááááááááááááááááááááááááááá5-11 2-2. Mechanism Deck Service Position áááááááááááááááááááááááááááááááááá2-3 5-1-11. Mechanical Chassis Block Assembly-1 áááááááááááááááááááááá5-12 2-3. LCD Service Position áááááááááááááááááááááááááááááááááááááááááááááááááááááá2-5 5-1-12. Mechanical Chassis Block Assembly-2 áááááááááááááááááááááá5-13 2-4. Circuit Boards Location áááááááááááááááááááááááááááááááááááááááááááááááááá2-6 5-2. Electrical Parts List ááááááááááááááááááááááááááááááááááááááááááááááááááááá5-14 2-5. Flexible Boards Location áááááááááááááááááááááááááááááááááááááááááááááááá2-7

3. BLOCK DIAGRAMS 3-1. Overall Block Diagram (1/6) ááááááááááááááááááááááááááááááááááááááááááá 3-1 3-2. Overall Block Diagram (2/6) ááááááááááááááááááááááááááááááááááááááááááá 3-3 3-3. Overall Block Diagram (3/6) ááááááááááááááááááááááááááááááááááááááááááá 3-5 3-4. Overall Block Diagram (4/6) ááááááááááááááááááááááááááááááááááááááááááá 3-7 3-5. Overall Block Diagram (5/6) ááááááááááááááááááááááááááááááááááááááááááá 3-9 3-6. Overall Block Diagram (6/6) ááááááááááááááááááááááááááááááááááááááááá3-11 3-7. Power Block Diagram (1/3)ááááááááááááááááááááááááááááááááááááááááááá3-13 3-8. Power Block Diagram (2/3)ááááááááááááááááááááááááááááááááááááááááááá3-15 3-9. Power Block Diagram (3/3)ááááááááááááááááááááááááááááááááááááááááááá3-17

4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. Frame Schematic Diagramsááááááááááááááááááááááááááááááááááááááááááááá4-1 4-2. Schematic Diagrams áááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-5 CD-472 (CCD IMAGER) áááááááááááááááááááááááááááááááááááááááááááááááá4-7 PD-205 (LCD DRIVER, BACKLIGHT DRIVE) ááááááááá4-45 SI-041 (STEADYSHOT, JACK) ááááááááááááááááááááááááááááááááááá4-47 FP-792 FLEXIBLE ááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-47 FP-228, FP-299, FP-300, FP-301, FP-302, FP-802 FLEXIBLE áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-49 SS-5100, PR-5100 (CONTROL KEY BLOCK) ááááááááááá4-50 CF-5100 (CONTROL KEY BLOCK) ááááááááááááááááááááááááááá4-51 4-3. Printed Wiring Boards ááááááááááááááááááááááááááááááááááááááááááááááááááá4-55 CD-472 áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-57 PD-205ááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-63 SI-041, FP-792 FLEXIBLE áááááááááááááááááááááááááááááááááááááááááá4-65 FP-228, FP-299, FP-300, FP-301, FP-302, FP-802 FLEXIBLE áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-67 4-5. Mounted Parts Location áááááááááááááááááááááááááááááááááááááááááááááááá4-71

— 4 — DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E SECTION 1 SERVICE NOTE

1-1. NOTE FOR REPAIR

Make sure that the flat cable and flexible board are not cracked of When remove a connector, don’t pull at wire of connector. bent at the terminal. It is possible that a wire is snapped. Do not insert the cable insufficiently nor crookedly.

When installing a connector, don’t press down at wire of connector. It is possible that a wire is snapped.

Cut and remove the part of gilt which comes off at the point. (Be careful or some pieces of gilt may be left inside)

1-2. POWER SUPPLY DURING REPAIRS

In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so that the unit cannot operate. The following method is available to prevent this.

Method 1. Use the AC power adaptor (AC-L10, AC-VQ800 etc.).

1-1 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

1-3. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)

1 Refer to “SECTION 2 DISASSEMBLY” to remove the mechanism deck block. 2 Disconnect CN2401 (2P) of VC-345 board. 3 Add +5V from the DC POWER SUPPLY and unload with a pressing the cassette compartment.

4 Pull the timing belt in the direction of arrow A with a pincette while pressing the cassette compartment (take care not to damage) to adjust the bending of a tape.

Press the cassette compartment not to rise the cassette compartment

Pincette [DC power supply] A (+5V)

Timing belt

5 Let go your hold the cassette compartment and rise the cassette compartment to take out a cassette. A

Loading motor

Disconnect CN2401 of VC-345 board.

Timing belt Adjust the bending of a tape

1-2 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

1-4. SELF-DIAGNOSIS FUNCTION

1-4-1. Self-diagnosis Function 1-4-2. Self-diagnosis Display When problems occur while the unit is operating, the self-diagnosis When problems occur while the unit is operating, the counter of the function starts working, and displays on the viewfinder or LCD what viewfinder or LCD shows a 4-digit display consisting of an alphabet to do. This function consists of two display; self-diagnosis display and numbers, which blinks at 3.2 Hz. This 5-character display and service mode display. indicates the “repaired by:”, “block” in which the problem occurred, Details of the self-diagnosis functions are provided in the Instruction and “detailed code” of the problem. manual. Viewfinder Display window C : 3 1 : 1 1 C : 3 1 : 11

Blinks at 3.2Hz

C 3 1 1 1

Repaired by: Block Detailed Code C : Corrected by customer Indicates the appropriate Refer to 1-4-3. Self-diagnosis Code Table . H : Corrected by dealer step to be taken. E : Corrected by service E.g. engineer 31 ....Reload the tape. 32 ....Turn on power again.

1-3 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

1-4-3. Self-diagnosis Code Table

Self-diagnosis Code

Block Detailed Symptom/State Correction Function Code

Repaired by: C 04 00Non-standard battery is used. Use the InfoLITHIUM battery. C 21 00Condensation. Remove the cassette, and insert it again after one hour. C 22 00Video head is dirty. Clean with the optional cleaning cassette. LOAD direction. Loading does not C 31 10 Load the tape again, and perform operations from the beginning. complete within specified time UNLOAD direction. Loading does not C 31 11 Load the tape again, and perform operations from the beginning. complete within specified time C 31 20T reel side tape slacking when unloading. Load the tape again, and perform operations from the beginning. C 31 21S reel side tape slacking when unloading. Load the tape again, and perform operations from the beginning. C 31 22T reel fault. Load the tape again, and perform operations from the beginning. C 31 23S reel fault. Load the tape again, and perform operations from the beginning. C 31 30FG fault when starting capstan. Load the tape again, and perform operations from the beginning. C 31 31FG fault during normal capstan operations. Load the tape again, and perform operations from the beginning. C 31 40FG fault when starting drum. Load the tape again, and perform operations from the beginning. C 31 41PG fault when starting drum. Load the tape again, and perform operations from the beginning. C 31 42FG fault during normal drum operations. Load the tape again, and perform operations from the beginning. C 31 43PG fault during normal drum operations. Load the tape again, and perform operations from the beginning. C 31 44Phase fault during normal drum operations. Load the tape again, and perform operations from the beginning. LOAD direction loading motor time- Remove the battery or power cable, connect, and perform C 32 10 out. operations from the beginning. UNLOAD direction loading motor Remove the battery or power cable, connect, and perform C 32 11 time-out. operations from the beginning. T reel side tape slacking when Remove the battery or power cable, connect, and perform C 32 20 unloading. operations from the beginning. S reel side tape slacking when Remove the battery or power cable, connect, and perform C 32 21 unloading. operations from the beginning. Remove the battery or power cable, connect, and perform C 32 22 T reel fault. operations from the beginning. Remove the battery or power cable, connect, and perform C 32 23 S reel fault. operations from the beginning. Remove the battery or power cable, connect, and perform C 32 30FG fault when starting capstan. operations from the beginning. FG fault during normal capstan Remove the battery or power cable, connect, and perform C 32 31 operations. operations from the beginning. Remove the battery or power cable, connect, and perform C 32 40FG fault when starting drum. operations from the beginning. Remove the battery or power cable, connect, and perform C 32 41PG fault when starting drum. operations from the beginning. FG fault during normal drum Remove the battery or power cable, connect, and perform C 32 42 operations. operations from the beginning. PG fault during normal drum Remove the battery or power cable, connect, and perform C 32 43 operations. operations from the beginning. Phase fault during normal drum Remove the battery or power cable, connect, and perform C 32 44 operations. operations from the beginning.

1-4 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

Self-diagnosis Code

Block Detailed Symptom/State Correction Function Code

Repaired by: Inspect the lens block focus reset sensor (Pin qs of CN1551 of Difficult to adjust focus VC-345 board) when focusing is performed when the control dial E 61 00 (Cannot initialize focus.) is rotated in the focus manual mode and the focus motor drive circuit (IC1554 of VC-345 board) when the focusing is not performed. Inspect the lens block zoom reset sensor (Pin qg of CN1551 of Zoom operations fault VC-345 board) when zooming is performed when the zoom switch E 61 10 (Cannot initialize zoom lens.) is operated and the zoom motor drive circuit (IC1554 of VC- 345board) when zooming is not performed. Steadyshot function does not work well. Inspect pitch angular velocity sensor (SE752 of SI-041 board) E 62 00(With pitch angular velocity sensor output peripheral circuits. stopped.) Steadyshot function does not work well. Inspect yaw angular velocity sensor (SE751 of SI-041 board) E 62 01(With yaw angular velocity sensor output peripheral circuits. stopped.)

1-5 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

“1-5. CHANGE OF IC4501” is not shown. Pages 1-6 is not shown. DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E SECTION 2 DISASSEMBLY HELP

2-1. FLOW CHART Note: When you remove Cabinet (R) Block, The following flow chart shows the disassembly procedure. or when you assembly, please slide 2 1 NS knob to the position of "ON". NS knob 8 1 3 2 7 1 2 9 q; 5 6 qd qf 5 7 6 9 1 5 4 3 4 4 qa HELP qs 8 1 qg 3 4 6 qh 6

1 Lock ace x3 6 Lock ace x3 1 Lock ace x6 1 Tr ipod Screw 9 Tapping P2 x2 2 Cabi (upper) 7 Claw 2 NS knob to the position of "ON". 2 Tapping P2 x2 q; Tapping P2 x1 3 Grip belt 8 Front panel 3 Cabi (R) 3 Tapping P2 x6 qa P Cabi (M) 4 Lock ace x3 Note: Flexible board is connected. 4 VC-345: CN1007 4 Claw qs PD-205: CN6005 5 Cabi (L) 9 FP-796: CN754, CN1001 5 VC-345: CN1003 5 CF-5100 qd PD-205: CN6001 6 VC-345: CN1008 6 Tapping P2 x4 qf PD-205, LCD901, ND901 7 Claw x2 qg Tapping P2 x4 8 P Cabi (C) qh Hinge assy

9 4 5 1 8 4 3 5 4 3 7 8 6 1 6 7 2 6 2 3 4 2 1 1 VC-345: CN1013 6 VC-345: CN1009 2 1 5 5 Lift up the EVF. EVF Cabi (upper) 2 VC-345: CN1016 7 Tapping P2 x1 2 6 1 VC-345: CN1501 4 Lock ace x2 Tapping P2 x4 EVF Cabi (lower) 3 VC-345: CN4001 8 Lock ace x1 3 7 2 VC-345: CN1551 5 Boss Down the EVF. FP-797: LCD902 4 Lock ace x3 9 SS-5100 4 8 3 Lens sheet 6 Lens LSV-820A EVF block EVF lens 5 EVF/Battely panel block

2 2 3 7 3 1 2

8 4 5 6 1 1 1 1 Tapping P2 x4 1 VF blind sheet 5 Claw 2 Claw x2 2 VC-345: CN2403, CN2404, CN3201 6 Open the VC-345. 1 Screw (M1.7) x3 3 P Cabi (C) 3 VC-345: CN2401 7 VC-345: CN2402 2 CS frame 4 Screw (M1.7) x2 8 VC-345

2-1 2-2 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

2-2. MECHANISM DECK SERVICE POSITION

Connection to Check the Mechanism deck To check the mechanism deck, set the Camera or VTR to the "Forced power ON" mode. (Or, connect the control key block (SS-5100) to the CN1009 of VC-345 board and set the power switch to the "CAMERA" or "PLAY/edit" position.) Operate the Camera functions of the zoom and focus, the VTR function using the adjustment remote commander (with the HOLD switch set in the OFF position).

Setting the "Forced Camera Power ON" mode Exiting the "Forced Power ON" mode 1) Select page: 0, address: 01, and set data: 01. 1) Select page: 0, address: 01, and set data: 01. 2) Select page: A, address: 10, set data: 02 and 2) Select page: A, address: 10, data: 00, and press the PAUSE press the PAUSE button of the adjustment remote button of the adjustment remote commander. commander. 3) Select page: 0, address: 01, and set data: 00. Setting the "Forced VTR Power ON" mode 1) Select page: 0, address: 01, and set data: 01. 2) Select page: A, address: 10, set data: 02 and 2 1 press the PAUSE button of the adjustment remote commander. 1

How to move up the cassette compartment manually Mechanism deck 2 B 5 6 Press the cassette compartment 7 A 9 in the direction of the arrow A to move it up in the direction of the arrow B. 4 1 1 8 Lens block 3 4 6

3 2 2 Info lithium battery 3 (L series) 1 7 CPC jig connector (J-6082-539-A) 1 6 1 Front panel block 5 Contacting 4 8 surface 4 VC-345 board 5 6

Adjustment remote commander (RM-95) I/F unit for LANC control (J-6082-521-A) 4 9 8 5 3 Cabinet R block 4 Eject switch EVF block/ 6 Battery panel block assembly 1 6 Control key block (SS-5100) 7 1 AC IN AC adaptor 2 3 4 5 2 When exiting the "Forced Power ON" mode, connect the control key block (SS-5100) to the CN1009 of VC-345 board. Or, when ejecting the cassette, connect the control key block (SS-5100) to the CN1009 of VC-345 board. and press the Eject switch.

2-3 2-4 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

2-3. LCD SERVICE POSITION

CPC jig connector 1 CN1011 Conductor side LCD panel 16

Back light unit CPC jig connector (J-6082-539-A) PD-205 board L serices Info LITHIUM battery (7.2Vdc) AC adaptor AC IN

AC adaptor AC IN

LANC jack Adjustment remote commander (RM-95)

I/F unit for LANC control (J-6082-521-A)

2-5 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

2-4. CIRCUIT BOARDS LOCATION

VC-345

CD-472

SI-041

PD-205

Board Name Function CD-472 CCD IMAGER VC-345 A/D CONVERTER, TIMING GENERATOR, VIDEO/AUDIO DSP, LENS CONTROL, LENS DRIVE, Hi8/Std8 VTR PROCESS, VIDEO IN/OUT , DV SIGNAL PROCESS, REC/PB AMP, DV INTERFACE, STEADYSHOT, Hi8/Std8 PB AMP, USB/MODE CONTROL, MS INTERFACE, MEMORY, HI CONTROL, CAMERA/MECHA CONTROL, SERVO, AUDIO, DC CONTROL, CONNECTOR PD-205 LCD DRIVE, BACKLIGHT DRIVE SI-041 STEADYSHOT, JACK

2-6 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

2-5. FLEXIBLE BOARDS LOCATION

FP-797 SS-5100 FFC-005

FP-799

CF-5100 FP-792

FP-796

PR-5100

2-7E DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

HELP

Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.

Harness (PD-124)

Claw

Insulating sheet (CF) Tape (CF) (TRV360/TRV460/TRV460:E/TRV461E)

Note: Close the LCD panel, when you work.

HELP DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

3. BLOCK DIAGRAMS

Link

OVERALL BLOCK DIAGRAM (1/6) OVERALL BLOCK DIAGRAM (6/6)

OVERALL BLOCK DIAGRAM (2/6) POWER BLOCK DIAGRAM (1/3)

OVERALL BLOCK DIAGRAM (3/6) POWER BLOCK DIAGRAM (2/3)

OVERALL BLOCK DIAGRAM (4/6) POWER BLOCK DIAGRAM (3/3)

OVERALL BLOCK DIAGRAM (5/6) DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

SECTION 3 3. BLOCK DIAGRAMS BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM (1/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

LENS BLOCK CD-472 BOARD VC-345 BOARD (1/6) Hi8/Std8 PB C RF

IRIS Q951 CN951 CN1501 36 2 Hi8/Std8 1 CCD OUT IC951 7 BUFFER 1 14 30 ı AD0 – AD9 OVERALL (3/6) CCD IC 3701 Y OUT IC1502 11 (PAGE 3-5) 34 ADCK IMAGER ZOOM MOTOR FOCUS MOTOR IRIS S/H, AGC, A/D CONVERTER VCK METER 1 – 4 12 – 14 7 NIGHT M M (1/18) ı 18 1 2 SHOT LENS V1 – V4,RG,H1,H2 8 RG, H1, H2 CLPDM, PBLK, 19 M 9 2 XSHP, XSHD XRST VTR PLUS ZOOM FOCUS ı 21 21 OVERALL (4/6) TEMP 11 6 43 SENSOR SENSOR 22 15 ı SENSOR H ı 23 20 (PAGE 3-7) 14 16 25 4647 48 16 1 26 ı V1 – V4 TRV460/TRV460E 4 28 AD0 –AD9 IC1501 XRST VTR /TRV461E CN1551 31 40 5 17 15 12 10 – 7 1 – 4 22 23 21 20 19 ADCK R1510 CLPOB TIMING 9 GENERATOR VCK VCK IRIS IRIS 12 BIAS(–) DRIVE(–) X1501 (1/18) R1507 TRV360/TRV361 TEMP 27 MHz 44 TG HD, TG VD 3 4 45 OVERALL (2/6) IR SWITCH HALL GAIN IRIS ZSG1 ZSG1, ZV1, TG ID

IRIS BIAS(+) (PAGE 3-3) IRIS HALL(–) IRIS HALL(+) FC SENS OUT CONTROL DRIVE 34 ZM SENS OUT ZV1 VGAT

41 CH CS, SO, SCK ZOOM A,B,XA,XB 5 FOCUS A,B,XA,XB Q1554 Q1551 TG ID CAM DD ON 48 VGAT 5 7 17 19 2 4 21 23 1 2 5 14 8 36 EN0,EN1, DIR0A,B, DIR1A,B, IC1554 IC1552 FC RST, ZM RST (4/18) (4/18) 42 ZOOM FOCUS HALL HALL HALL IRIS MOTOR MOTOR BIAS AMP GAIN DRIVE CH CS, CH SO, CH SCK DRIVE DRIVE 47 35 37 13 – 16 9 – 12 3 6 7 12 10 ı CAM SI, CAM SO, CAM SCK, CAM CS 39 EN1, DIR1A, EN0, DIR0A, HALL HALL HALL ZM RST FC RST DIR1B DIR0B REF OFFSET GAIN CK CONT

XNS SW LENS TEMP AD HALL AD, LENS DET, HALL AD IRIS PWM LENS TEMP AD, XNS SW IRIS PWM PITCH AD, YAW AD SDC IN 4 XVIDEO IN SI-041 BOARD (1/4) XCS IC 3701 OVERALL (4/6) CN1001 (PAGE 3-7) CN754 (1/4) (1/4) SE752 LIA 1 PITCH AD VD SO, VD SCK 30 7 8 2 PITCH SENSOR IC2001 LINE Y ON SE751 STEADYSHOT LIA 2 (9/18) YAW AD VSP SI, VSP SO, XVSP SCK YAW SENSOR 29 8 12 18 XCS AU1

6 DEM 0, 1, 7 XPWAD, XPWDA 13 IC5801 IC5402 9 MIC L,R 14 MIC901 INT MIC L,R 2 MIC AMP 12 20 – 22 23 AUDIO DATA TO SFD MICROPHONE 19 (16/18) 8 CN753 2 A/D, D/A DATA FROM SFD 2 4 REC OUT L, R 9 INT MIC L 63 5 3 CONVERTER SFD BCK L 1 33 4 (16/18) 12 5 INT MIC R AUDIO L,R I/O 3 7 PB IN L, R 15 SFD LRCK 32 5 10 OVERALL (2/6) 64 8 16 SFD FCK R 3 11 IC5401 (PAGE 3-3) Q3701 KASYAON Q5401, 5402 AUDIO DC LEVEL 57 Hi8/Std8 PB RF DETECTOR MUTE PROCESS 26 58 (16/18) AFM FSC 14 RF SWP

XCS IC 3701 VD SO, SCK 59 24 SP+,– 49 17 1.7M DEV, 1.5M DEV 11 9 10 51 18 AU BPF 28 6 46 BPF MONI 29 OVERALL (3/6) J751 S Y I/O S Y I/O (PAGE 3-5) 13 24 39 S VIDEO S C I/O S C I/O IC3701 11 26 48 FRQ TUNE VIDEO IN/OUT 1 42 HALL OFFSET, HALL GAIN, HALL REF XS JACK IN XS JACK IN (6/18) 12 25 Q8504 IC8501 14 15 Hi8/Std8, LINE Q3702, 3703 36 VIDEO 5 A/D ı BUFFER AD0 C – AD9 C 18 IC 3701 CONVERTER 24 VIDEO I/O VIDEO I/O MUTE IC 3701 C OUT 15 22 22 Y OUT (3/18) 14 7 AUDIO L I/O ADCK27

18 19 CPLVO Hi8/Std8, LINE OVERALL (2/6) J752 AUDIO R I/O 34 17 20 IC 8001 Y OUT IC 8001 Y OUT (PAGE 3-3) A/V AV JACK IN AV JACK IN 46 19 18 IC 8001 C OUT IC 8001 C OUT 7 IC 2201 Y OUT Hi8/Std8 IC 2201 Y OUT 44 8 IC 2201 C OUT Hi8/Std8 IC 2201 C OUT 5 OVERALL (3/6) ACC-CONT 1 (PAGE 3-5) AGC-CONT 47 BEEP OVERALL (2/6) CONTROL KEY BLOCK (CF-5100) (1/2) AV JACK IN, XS JACK IN CN1008 9 (PAGE 3-4) SP901 1 SP+, – A : VIDEO SIGNAL SPEAKER 2 A : AUDIO SIGNAL ACC-CONT, AGC-CONT, CLPVO OVERALL (2/6) 10 (PAGE 3-3) 05 3-1 3-2 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

3. BLOCK DIAGRAMS 3-2. OVERALL BLOCK DIAGRAM (2/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. VC-345 BOARD (2/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. OVERALL (3/6) SPCK LCKO 139 20 (PAGE 3-5) 11 VCK RECDT RECDT 143 45 OVERALL (4/6) SPCK SI-041 BOARD (2/4) 268 119 120 47 RECA1,2 RECA1,2 (PAGE 3-7) 12 224 ı RYO0 – RYO3 ı 271 162 163 48 OVERALL (3/6) RECCK RECCK AD0 – AD9 231 41 16 (PAGE 3-5) 233 IC8001 279 70 71 ı RCO0 – RCO3 234 VIDEO/AUDIO DSP, 121 122 RF IN RF IN CLPOB 282 139 221 D/A CONVERTER, VCK LENS CONTROL 287 HYO, HCO 164 CN1001 CN754 241 LCKO (2/18) 288 165 IC6001 79 (2/4) (2/4) CN751 28 9 TG HD, TG VD 219 301 ADATAIN0,1 127 TRCKO DV SIGNAL 104 47 6 29 8 1 220 302 168 IC8301 ı ZSG1, ZV1, TG ID ZSG1 PROCESS 42 TPA+, –, TPB+, – 31 6 TPA, NTPA, TPB, NTPB ı DV 216 149 150 DV INTERFACE 9 4 (7/18) LBUS0-3 ı 32 5 ZV1 186 187 45 (9/18) OVERALL (1/6) 217 CAM DD ON TG ID 264 13 14 24 – 26 (PAGE 3-2) 3 236 ı RYI0 – RYI3 27 29 – 32 VGAT 72 73 D24A00 – D31A07, ALE, WRX, RDX 222 267 34 – 37 EN0,1, DIR0A,B, DIR1A,B EN0,1 239 272 54 55 57 248 273 123 – 125 XCS IC 8301 RCI0 – RCI3 275 166 107 109 110 DIR0A,B 246 D24A00 – D31A07, DXXA08, DXXA09, ALE, WRX, RDX D24A00 – D31A07, DXXA08, DXXA09, ALE, WRX, RDX 276 152 – 155 247 189 190 192 284 HYI, HCI 12 DIR1A,B 250 XCS IC 8301 XCS IC 8301 251 285 75 188 XCS IC 6001 XCS IC 6001 158 FC RST, ZM RST 237 298 ADATAOUT0,1 126 238 299 167 3 114 VSP SI, VSP SO, XVSP SCK VSP SI, VSP SO, XVSP SCK Hi8/Std8, LINE DSCK VM 157 252 15 AD0 C – AD9 C ı 58 261 CAM SI, CAM SO. CAM SCK. CAM CS IC 3701 C OUT Hi8/Std8, LINE XSYS RST 59 FRRV, TRRV, TRRT, DRP 33 62 111 OVERALL (4/6) OVERALL (1/6) ADCK27 17 (PAGE 3-7) 245 112 (PAGE 3-2) 7 SFD BCK HI SI, HI SO. XHI SCK. XCS MECHA 21 IC 8001 Y OUT SFD LRCK 53 78 60 IC 8001 C OUT 60

DATA TO SFD 86 87 FRRV, TRRV, TRRT FRRV, TRRV, TRRT, DRP DATA FROM SFD 168 89 169 SWP USB 3.1V SFD BCK OVERALL (1/6) 82 150 Q1007 (PAGE 3-2) 5 SFD LRCK ı 83 VSP SI, VSP SO, XVSP SCK USB SFD FCK 152 85 REC PROOF PULL UP KASYAON 154 156 CAM SI, CAM SO. CAM SCK. CAM CS 91 158 159 XCS IC8001 XCS IC 8001 149 SYS V SYS V 157 CN752 USB D+ 28 35 2 2 29 USB D+, USB D– USB D+, USB D– 34 3 D+, – 3 USB XEN 80 D755 VFI OE VCC (USB) 160 REC PROOF 36 1 1 ALIGN VD 234 185 161 USB D+, USB D– OVERALL (4/6) BIRDS VD 186 162 SYS V USB DET (PAGE 3-8) 13 BIRDS FLD IC5703 221 168 163 IC5701 LINEOUT V XTAL OSC 97 164 USB CONTROL, USB D+ PULL UP CN1015 VREF (11/18) ı 256 MS LED ON 165 HI SI, HI SO. XHI SCK. XCS MECHA 99 MEMORY STICK 2 X5703 MS XIN 48 MHz 237 INTERFACE, 5 LINEOUT V USB CLK USB CLK MODE CONTROL FOR JIG OVERALL (5/6) 24 177 1 XSYS RST DSCK VM DSCK VM (11/18) (PAGE 3-9) 14 141 119 122 MS DIO, MS BS, MS SCLK 6 7 121 122 16 – 18 D0 VM – D15 VM D0 VM – D15 VM 124 – 137 21 – 24 27 – 35 CN1016 98 78 2 ı A1 VM – A19 VM 1 – 4 7 – 12 81 MS DIO, MS BS, MS SCLK 4 EVF G/BW Y 46 116 A1 VM – A22 VM 291 – 298 85 6 MEMORY 301 – 304 STICK EVF HD, EVF VD 95 2 3 5 6 XCS EEP, MS XIN MS XIN 96 DSCK VM EEP XRDY, 80 5 198 – 205 8 9 11 35 IC8002 EEP RXD3, Q8001 207 208 MDQ0 T – MDQ15 T 12 39 40 MS LED ON PANEL R 2 3 5 6 EEP SCK3. 287 OVERALL (6/6) 40 210 – 215 42 43 45 16M 8 9 11 EEP TXD3 (PAGE 3-11) 15 PANEL G 46 48 49 SDRAM BUS DATA IC5501 IC5702 BUFFER 39 D0 VM – D15 VM 12 39 40 1 – 3 235 236 KEY AD 6 PANEL B (3/18) 42 43 45 16M EEPROM 5 6 103 – 105 145 45 171 174 19 – 24 KEY AD 5 MA0 T – MA10 T, MA12 T 46 48 49 SDRAM (11/18) 144 PANEL HD, PANEL VD 92 176 – 185 27 – 32

ADDRESS BUS KEY AD 1 (12/18) 140 TPX, TPY, TP SELE1 93 MEMCK OUT 19 – 24 196 35 A1 VM – A11 VM, A13 VM XCS SDRAM VM KEY AD 0 KEY AD 0, 1, 5. 6 MXCSO 27 – 32 18 71 139 190 18 MS LED ON ACC-CONT, AGC-CONT, 93 OVERALL (1/6) CLPVO XCS FLASH ı IC 5001 RXD0, IC 5001 TXD0, IC 5001 SCK0, IC 5001 CS 66 29 – 36 26 69 96 18 (PAGE 3-2) 10 D0 VM – D15 VM IC5502 XSYS RST 38 – 45 12 OSD V OVERALL (5/6) 64 32M 220 XDS RESET (PAGE 3-9) 62 1 – 10 13 FLASH 86 A1 VM – A22 VM 16 – 25 (12/18) XVM MAD 274 48 Q5701, 5702 MELODY BEEP 230 MODURATOR SFD LRCK MELODY ENV 9 124 253 CAM DD ON AV JACK IN AV JACK IN, XS JACK IN OVERALL (1/6) 131 238 TP X XS JACK IN (PAGE 3-2) 137 239 A : VIDEO SIGNAL TP SEL1 249 A : AUDIO SIGNAL TP Y IR ON TP SELECT SWITCH 138 254 19 A : VIDEO/AUDIO SIGNAL Q5703 TP SEL2 OVERALL (5/6) A : VIDEO/AUDIO/SERVO SIGNAL 250 (PAGE 3-10) 05 3-3 3-4 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

3. BLOCK DIAGRAMS

3-3. OVERALL BLOCK DIAGRAM (3/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

M2000/M2200 MECHA DECK (1/2) VC-345 BOARD (3/6) M2000: TRV460/TRV460E/TRV461E M2200: TRV360/TRV361

VIDEO HEAD ODD RECDT RECDT 46 CN3201 FLYING RECA1,2 RECA1,2 40 ERASE 3 ODD (SP1) 5 16 42 RECCK RECCK 4 4 44 OVERALL (2/6) IC3201 10 EVEN (SP2) 7 (PAGE 3-4) RF IN RF IN REC/PB AMP 9 8 35 DV PB RF (8/18) TRV460/TRV460E/TRV461E 25 Q3206 – 3209 RF MON 30 PB C RF Hi8/Std8 EVEN Hi8/Std8 PB ON SWITCH

PB FBDP XME/MP 22 13 LPF FO SW PS 1 36 37 Hi8/Std8 187 AGC EVR ALL PS OVERALL (1/6) AD0 – AD9 ı 34 43 (PAGE 3-2) 196 ADCK 38 185 IC2201 VCK 198 Hi8/Std8 VTR PROCESS IC 2201 Y OUT Hi8/Std8 (5/18) RF AGC OUT

8 4 51 9 RF SWP Q3202, 3204, 3205 IC 2201 C OUT Hi8/Std8 PB C RF 213 49 11 18 XMP/ME FE (X) OVERALL (1/6) PB RF IC3001 ERASE HAED 11 (PAGE 3-2) 14 Hi8/Std8 Q3001 OSC 95 PB AMP AGC AGC SLOW DOP 10 VD SI, VD SO, VD SCK ı 77 7 (10/18) CONTROL 97 Q2207 REC Y/MT CONT RP POWER SAVE AFC F0 3 46 VCO 53 REC L CONT RP PB MODE 48 13 RP IR JOG VD 8 83 DOC DET X1/2 SWP 12 Q3002 84 MT FO RF ENV DET SWP DIR 15 5 BUFFER 85 MT Q ATF SAMPLE 19 87 SYS V AFM FSC 88 79 DRUM 8PB MECHA HD, MECHA VD 93 XME/MP 94 SW PS 21 CK CONT 101 ALL PS XTBC V RST OVERALL (4/6) 157 XFE ON (PAGE 3-8) TBC VD AFC F0 ADJ 20 158 66 XCS IC 2201 OVERALL (4/6) 98 XRST IC 2201 (PAGE 3-7) 99 67 SPCK 81 AGC SLOW RP POWER SAVE RP PB MODE RF ENV DET CN1011 (1/3) RF MON DOP 9 RF SWP SW DIR CPC 5 PB RF (FOR CHECK) 2 BPF MONI 3 MT FO 16 5 DA STRB MT Q 15 20 AFC F0 ADJ 23 27 CAM SO, CAM SCK REC Y/MT CONT 28 IC1601 3 REC L CONT 11 EVR 4 SPCK RP IR OVERALL (2/6) (D/A CONVERTER) 24 (10/18) DOC DET (PAGE 3-3) HALL OFFSET, HALL GAIN, HALL REF 17 26 ı 19 XMP/ME FREQ TUNE 6 22 PB FBDP AU BPF 8 10 LPF FO 12 1.7M DEV, 1.5M DEV 9 AGC EVR 21 6 11 OVERALL (1/6) (PAGE 3-2) RF SWP AFM FSC A : VIDEO SIGNAL PB RF A : AUDIO SIGNAL BPF MONI A : SERVO SIGNAL A : VIDEO/SERVO SIGNAL A : VIDEO/AUDIO/SERVO SIGNAL 05

3-5 3-6 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

3. BLOCK DIAGRAMS 3-4. OVERALL BLOCK DIAGRAM (4/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

VC-345 BOARD (4/6) OVERALL (2/6) SPCK SPCK M2000/M2200 35 (PAGE 3-3) 12 IC2401 (3/3) MECHA DECK (2/2) 38 VSP SO, XVSP SCK M2000: TRV460/TRV460E/TRV461E 36 (15/18) M2200: TRV360/TRV361 XRST VTR 34 SERIAL OVERALL (1/6) XRST VTR XCS IC 2401 INTERFACE IC2401 (1/3) M901 100 16 37 CN2402 (PAGE 3-2) 2 (15/18) DRUM MOTOR 25 IC1301 (1/2) Q1310 63 62 DRUM PWM DRUM ERROR DRUM VS 64 U, V, W 10 88 44 45 6 62 SWITCHING 65 ı CH CS, CH SO, CH SCK 73 DRUM/CAPSTAN 67 DRUM M LPF 68 5 71 CAP PWM CAP ERROR PWM DRIVE MOTOR 89 41 43 9 (17/18) 61 SWITCHING DRIVE 69 Q2402 24 Q1309 VSP SI, VSP SO, XVSP SCK 70 DRUM Hi8/Std8 DRUM FG FG 67 11 53 FG AMP 52 3 DRUM FG MODE SWITCH VSP SO, SI, XVSP SCK 78 DRUM PG PG DRUM FG 50 PG AMP 49 1 DRUM PG 77 197 CAM SI, CAM SO, CAM SCK, CAM CS DRUM PG 75 198 161 CK CONT DRUM 8PB M902 189 CN2403 ALL PS CAPSTAN MOTOR HALL AD, 28 74 LENS TEMP AD, XNS SW SW PS 21 CAP U, V, W 14 HALL AD 29 76 ı M 128 OVERALL (3/6) CAP VS 75 LENS TEMP AD XME/MP CAPSTAN 78 HU1, 2 9 127 37 (PAGE 3-6) 77 OVERALL (1/6) XNS SW XFE ON MOTOR HV1, 2 187 170 CAP FWD, CAP ON 1 10 7 (PAGE 3-2) 4 DRIVE ı HW1,2 IRIS PWM CAP FWD, CAP ON ı HU, HV, HW 94 IC4501 166 80 15 2 PITCH AD, YAW AD PITCH AD 165 129 CAMERA/ YAW AD 130 MECHA CAP FG CAP FG 7 FG1, 2 18 SDC IN 190 4 FG AMP CAPSTAN FG 118 CONTROL 8 16 XVIDEO IN 112 (14/18) XCS IC 3701 DEW AD DEW AD 99 119 22 DEW SENSOR LINE Y ON 113 106 21 S901 XCS AU1 MODE SW A – C MODE SW A-C 43 ı ı MODE SWITCH DEM 0, 1, XPWAD, XPWDA 108 19 76 IC2401 (2/3) M903 97 LOAD, LOAD, (15/18) CN2401 LOADING MOTOR UNLOAD UNLOAD VD SO, VD SCK 137 15 32 LOADING 69 LM (+) , LM (–) 2 M 139 13 33 MOTOR 72 1 LM LIM DET LM LIM DET DRIVE 138 31 D001 VD SI, VD SO, VD SCK CN2404 TAPE TAPE END TAPE END TAPE END (C) Q002 LED OVERALL (6/6) 31 21 TAPE END 20 2 TAPE END (PAGE 3-11) 22 DETECT SENSOR EVF DD ON 117 XCS LCD TAPE TOP TAPE TOP TAPE TOP (C) Q001 38 30 19 TAPE TOP 18 1 TAPE TOP DETECT SENSOR 83 82 T REEL FG T REEL FG VD SI, VD SO, VD SCK 192 29 26 T REEL (+) , (–) 9 80 T REEL T REEL H001 FG AMP 27 10 SENSOR CAM SO, CAM SCK S REEL FG S REEL FG 193 25 S REEL (+) , (–) 6 S REEL 22 S REEL H002 AFC F0 110 FG AMP 23 7 SENSOR JOG VD 168 X1/2 SWP 169 Q2401 SWP DIR VSP SO, SI, XVSP SCK 171 TAPE LED ON TAPE LED (K) ATF SAMPLE 180 LED DRIVE 3

CAM SI, SO, SCK, CS 156 S001 SYS V REC PROOF 181 13 REC PROOF ME SW ME SW MECHA HD, MECHA VD 173 109 12 ME/MP OVERALL (3/6) HI8 MP SW HI8 MP SW 202 120 14 HI8 MP (PAGE 3-5) 20 CK CONT XCC DOWN 15 TBC V RST C. C. LOCK 188 S002 TBC VD XCC DOWN 205 XCS IC 2201 ZOOM VR AD 154 135 23 XRST IC 2201 132 8 OVERALL (5/6) AGC SLOW XSYS RST (PAGE 3-9) 214 9 RP POWER SAVE 26 USB XEN RP PB MODE 195 196 VFI OE RF ENV DET 68 115 ALIGN VD RF SWP 207 172 BIRDS VD 13 DA STRB 203 59 BIRDS FLD OVERALL (2/6) DOP 185 194 LINEOUT V (PAGE 3-3) CN1011 (2/3) 201 CAP FG CAM SI, CAM SO, CAM SCK, CAM CS VREF 4 204 CPC XCS EEP (FOR CHECK) VSP SI, VSP SO, XVSP SCK 16 3 1 63 X4501 EEP SI, EEPSO, EEP SCK 14 HI SI, HI SO, XHI SCK, XCS MECHA ı 20MHz 66 15 1 45 – 52 32 33 XCS EEP MC BUS 0 – 7, HA0, 1, ALE, WRX, RDX 10 1 22 24 25 IC4502 FP-792 FLEXIBLE OVERALL (2/6) 87 2 SI-041 BOARD 17 XCS IC 8301 EEPROM (3/4) BOARD (PAGE 3-4) 18 86 EEP SI, EEPSO, EEP SCK 5 XCS IC 6001 84 6 (14/18) 215 D001 – 003 XCS IC 8001 155 CN754 (VIDEO LIGHT) FRRV, TRRV, TRRT, DRP TRRV Q1002 179 CN1001 (3/4) (3/4) SYS V TRRT VIDEO LIGHT VL+ LND754 178 VL 16V 1 30 REC PROOF FRRV DRIVE 23 DRP 163 SWP V LIGHT PWM 164 91 A : VIDEO SIGNAL 05 A : SERVO SIGNAL 3-7 3-8 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

3. BLOCK DIAGRAMS

3-5. OVERALL BLOCK DIAGRAM (5/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

CONTROL KEY VC-345 BOARD (5/6) BLOCK (PR-5100) PD-205 BOARD (1/2) S601 CN6005 SI-041 BOARD (4/4) CN6001 (1/2) CN1003 (1/2) OVERALL (2/6) IR ON PANEL 1 PANEL REV PANEL REV (PAGE 3-4) 19 REVERSE 20 20 D759 2 CN1001 (4/4) CN754 (4/4) SW (TALLY) 29 XF TALLY LED XF TALLY LED X5001 16 12 25 D753, 754 (IR EMITTER) 10MHz 28 D1001 SIRCS PWM/ Q751 CONTROL KEY BLOCK (SS-5100) X5002 52 SIRCS PWM IR DRV EN IC5001 45 32.768kHz 17 20 LED DRIVE CN1009 51 XPHOTO FREEZE HI CONTROL 15 S003 (13/18) KEY AD5 KEY AD5 PHOTO 14 IC751 SIRCS SIG XSIRCS SIG REMOTE D004 41 14 23 1 COMMANDER XCHARGE LED XCHARGE LED CHG 6 9 RECEIVER S001 START/STOP KEY AD6 CAMERA XS/S SW 1 SW D003 XCAM LED XCAM LED TAPE 7 10 D002 XMEM LED XMEM LED CN1011 (3/3) MEMORY 8 11 LANC OUT D001 40 11 XVTR LED XVTR LED LANC IN CPC 9 12 39 12 PLAY/EDIT XLANC POWER ON (FOR CHECK) 7 13

(CHG) OFF S004 XPOWER SW XPOWER SW 4 1 POWER ON XMODE SW XMODE SW 3 2 > MODE

S002 XEJECT SW XEJECT SW EJECT SW 16 4

RV001 ZOOM VR ZOOM VR AD BL CONT ZOOM VR 12 BL REG 14 OVERALL (6/6) 24 (PAGE 3-11)

D 1.2V A 1.5V CONTROL KEY BLOCK (CF-5100) (2/2) D 1.5V RP 2.8V CN1007 A 2.8V FUNCTION KEY AD0, 1 5 KEY AD0, 1 D 2.8V SW 14 AU 2.8V Q1009 D 1.9V IC1301 (2/2) D002 XCUSTOM LED LED A 4.6V DC CONTROL, 9 17 EASY DRIVE AU 4.6V RESET, EP 4.6V LANC DRIVER Q1006 (17/18) RP 4.6V D001 XMS LED 11 LED RP 6.0V VTR UNREG (MS ACCESS) DRIVE MT 5V BATT UNREG BT901 S001 CN4001 VL 16V Q4003, 4004 Q4001, 4002 DISP/ XBATT INFO SW 4 6 6 CAM –7.5V + BATT INFO SW CAM 15V 3 – DC IN S002 XRESET EP 13.5V RESET SW 22 73 CHARGE LI 3V EVER 3.0V CONTROL 2 BT001 3 VOUT LITHIUM BATTERY 20 27 6 + HI EVER SO, HI EVER SCK BATTERY 21 28 5 S TERMINAL BATT IN 1 – 31 44 ZOOM VR AD VTR DD ON 35 38 OVERALL (4/6) XCC DOWN XCS DD 5 67 26 (PAGE 3-8) 23 XSYS RST 18 VBAT BATT/XEXT 39 77 XSYS RST FAST CHARGE D1301 OVERALL (2/6) 37 XRESET REG 3V LINEOUT V INIT CHARGE ON 45 40 (PAGE 3-3) 14 32 38 MS LED ON Q5001 23 ı IC 5001RXD0, IC 5001 TXD0, IC 5001 SCK0, IC 5001 CS 43 BATTERY BATT SIG 26 AST CHARGE

CHARGE F BATT/XEXT SIG BATT OSD V 42 INIT CHARGE ON OVERALL (2/6) 19 DETECTOR (PAGE 3-4) 18 XDS RESET 44 XVM MAD 33 KEY AD0, 1, 5, 6

3-9 3-10 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

3. BLOCK DIAGRAMS

3-6. OVERALL BLOCK DIAGRAM (6/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

VC-345 BOARD (6/6) EVF BLOCK CN1013 EVF G/BW Y 6 LCD902 B/W EVF DD ON NSLEEP LCD UNIT 2 EVF HD HSYNC 4 OVERALL (4/6) XCS LCD EVF VD VSYNC 5 (PAGE 3-7) 22 VD SI, VD SO, VD SCK

OVERALL (5/6) BL CONT (PAGE 3-10) 24

PD-205 BOARD (2/2)

EVF G/BW Y

EVF HD, EVF VD LCD901 CN1003 (2/2) CN6001 (2/2) CN6004 PANEL R PANEL R VR R 10 10 40 19 4 PANEL G PANEL G VG G 9 9 39 20 5 PANEL B PANEL B VB B 8 8 38 21 3 Q6004, 6005 2.5 INCH XCS LCD D/A VP PSIG COLOR 13 13 45 25 PSIG DRIVE 6 LCD UNIT IC6001 2 RGT, HCK1,2, 2 7 REF, HST, WIDE, LCD DRIVER ı 8 PANEL HD C SYNC/XHD 4 DWN, EN, 12 12 43 11 VCK, VST PANEL HD, PANEL VD PANEL VD PANEL XVD 6 RGT, HCK1, 2, REF, HST, WIDE, DWN, EN, VCK, VST 11 11 42 14 12 15 13 OVERALL (2/6) 32 19 (PAGE 3-3) 15 Q6008, 6009 ı ı 22 35 TOUCH PANEL I/F CN6007 TP R 14 14 46 1 VD SI, VD SO, VD SCK ı ı SI, SO, SCK ı TP BOT 16 16 48 4 TOUCH TP TOP 5 PANEL TP L 2

T6001, Q6003 BL CONT 4 4 28 BL DET INVERTER 30 CN6003 29 TRANSFORMER BL HIGH BL REG BACKLIGHT 10 DRIBE

TP X, TP Y, TP SEL1 TP SEL1 TP SEL1 6 6 ND901 TP X TP X 5 5 BACKLIGHT TP Y TP Y 7 7 D6004 BL LOW 3 A : VIDEO SIGNAL

3-11 3-12 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

3. BLOCK DIAGRAMS

3-7. POWER BLOCK DIAGRAM (1/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

BT901 BATTERY VC-345 BOARD (1/2) Q4003, 4004 TERMINAL MT 5V CN4001 CHARGE Q1002 CN1001 CONTROL VIDEO BATT UNREG VL+ + 6 LIGHT 1 BATT SIG D4001 DRIVE S 5 BATT GND INIT CHARGE ON Q1316, 1318, 1320 – 1 F003 15 MT 5V 5V REG A 16 D 2.8V 13 POWER(3/3) FAST CHARGE F001 VTR UNREG (PAGE 3-17) 10 A 2.8V 11 ACV UNREG F004 + 4 BATT/XEXT Q4001, 4002 DC IN 2 V LIGHT PWM F002 D1302 55 VCC1 ACV GND BATT UNREG MT 5V – 3 56 VCC0 VTR UNREG IC1301 L1322 A 1.5V DC CONTROL, RESET Q1305 L1305 (17/18) L1309 D 1.5V IC5001 36 CDET SWITCHING HI CONTROL VIN Q1326, 1327 43 D 1.9V (13/18) OUT1 57 1.9V REG IN1 20 BATT SENSE 65 EVER 3.0V VR ACV SENSE 66 41 VRO 34 29 RST L1314 37 FAST CHARGE LI 3V D 2.8V 39 VBAT 38 Q1307 L1303 INIT CHARGE L1313 A 2.8V 40 REG 3V SWITCHING D1301 L1315 V OUT AU 2.8V 42 VOUT OUT3 59 Q5001 IN3 22 L1312 RP 2.8V BATTERY VTR DD ON BATT SIG 43 IB SI VTR DD ON 35 38 CTL1 CHARGE D1303 Q1304, 1314 42 IB SO CAM –7.5V DETECTOR XCS DD –7.5V REG XCS DD 67 26 LD HI EVER SO FR EVER SO 20 27 BATT/XEXT DIN Q1302, 1312, 1313 77 BATT/XEXT HI EVER SCK CAM 15V FR EVER SCK 21 28 CLK +15V REG BATT IN CAM DD ON BATT IN 31 44 CS B POWER(2/3) D1306 L1311 Q1301, 1303 HOTSHOE ID1 54 EP 13.5V (PAGE 3-15) HOTSHOE ID2 55 13.5V REG

Q1311 L1308 IC1302 1 RP 6.0V SWITCHING 4 CONTROL KEY 5 6V REG (17/18) BLOCK (CF-5100) CN1007 L1301 LI 3V L1319 BT001 3 EP 4.6V LITHIUM Q1308 L1304 BATTERY L1317 A 4.6V SWITCHING D002 L1318 CUSTOM LED VDD MT 5V AU 4.6V EASY 7 OUT4 60 L1320 IN4 23 RP 4.6V D 2.8V 17 Q1315 FUNCTION D 2.8V L1321 15 D 1.2V SWITCH D 2.8V 1.2V REG OUT7 63 4 EVER 3.0V –INE7 2 D001 MS LED VDD (MS ACCESS) 13 Q1306 L1302 L1310 SWITCHING 5 IC1305 3 OUT2 58 DC CN1003 IN2 21 4 CONTROL 1 PANEL 13.3V CONTROL KEY (17/18) 19 BLOCK (SS-5100) 37 VREF EP 4.6V PANEL 4.6V 1 DTC6 18 C RV001 CN1009 W (ZOOM) T RT BL CONT BL CONT POWER(3/3) D 2.8V 30 +INE2 14 4 11 (PAGE 3-17) BL REG 2 D004 CHARGE LED VDD CAMERA CHG 5 D003 TAPE MODE LED VDD 10 D002 MEMORY D001 D 2.8V D 2.8V PLAY/EDIT 05

3-13 3-14 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

3. BLOCK DIAGRAMS

3-8. POWER BLOCK DIAGRAM (2/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

M2000/M2200 MECHA DECK M2000: TRV460/TRV460E/TRV461E EVF BLOCK M2200: TRV360/TRV361 H001,002 D001 LCD902 T REEL, TAPE CAPSTAN CN1013 S REEL, HU, HV, HW B/W LED FG 3.3V SENSOR 1 LCD UNIT

EP 4.6V EVF 4.6V 3 4 8 17 8 CN2404 CN2403 VC-345 BOARD (2/2) TRV460/TRV460E/TRV461E VH+

FG VCC IC1001 IC2401 5 3.3V REG 4 SENSOR VCC TAPE LED (A) DRUM/ (18/18) IC3201 IC3001 CAPSTAN/LOADING REC/PB Hi8/Std8 MOTOR AMP PB AMP DRIVE VMR 3 1 (8/18) (10/18) (15/18) VH 17 D 2.8V

USB 3.1V L3201 L3202 L3001 FB2401 RP 4.6V IC1552 V LIGHT PWM IRIS DRIVE, IC2001 IC1554 MT 5V MT 5V IC1502 IC1501 HALL BIAS CONTROL, STEADY VTR UNREG VTR UNREG S/H. AGC. TIMING HALL GAIN CONTROL, FOCUS/ZOOM SHOT A/D CONVERTER GENERATOR HALL AMP MOTOR DRIVE CAP VS EP 13.5V (9/18) (1/18) (1/18) (4/18) (4/18) DRUM VS CD-472 BOARD L2001 L1501 L1552 L1553 FB1501 FB1502 MT 5V MT 5V CN1501 CN951 CAM –7.5V CAM –7.5V CAM –7.5V IC951 12 3 CAM 15V CAM 15V CAM 15V CCD 10 5 A 2.8V L951 IMAGER A 1.5V D 1.5V D 1.5V D 1.5V D1.9V D1.9V CN1551 LENS BLOCK D 2.8V D 2.8V D 2.8V D 2.8V IRIS DRIVE (+) IRIS 24 A 2.8V A 2.8V METER TEMP TEMP AU 2.8V 18 SENSOR Q1555 ZM SENS VCC ZOOM 16 B RP 2.8V A 4.6V A 4.6V SENSOR FC SENS VCC FOCUS POWER (1/3) 13 AU 2.8V SENSOR (PAGE 3-14) AU 4.6V L8301 L3701 L3705 CAM –7.5V FB8301 FB8302 CAM 15V FB1601 FB1602 FB4501

CN1016 IC5401 IC5402 IC5801 IC4502 IC1002 IC1601 IC8301 IC3701 IC4501 3 VCC 5 4 MEMORY AUDIO PROCESS AUDIO MIC AMP EVR DV INTERFACE VIDEO IN/OUT CAMERA/MECHA EEPROM 2.9V REG 7 STICK (16/18) A/D, D/A (16/18) (D/A CONVERTER) (9/18) (6/18) CONTROL (14/18) (18/18) CAM DD ON CONVERTER (10/18) (14/18) 1 (16/18) EP 13.5V ZM RST LED 55 RP 6.0V FC RST LED 57 EP 4.6V EP 4.6V A 4.6V AU 4.6V 91 RP 4.6V STROBO PWM D 1.2V D 1.2V CN1015 USB 3.1V USB 3.1V USB 3.1V 8 A 1.5V D 1.5V D 1.2V FOR JIG D 2.8V D 2.8V D 2.8V 3 A 2.8V FB5501 FB5502 FB5702 FB5701 FB5703 FB5704 FB8003 L8002 FB8002 FB8001 L8003 FB8502 FB8501 L6003 L6001 L6004 L6007 L6008 FB6002 FB2205 L2202 L2208 FB2204 FB2202 L2209

IC8001 IC8002 IC8501 IC6001 IC5502 IC5501 IC5703 IC5702 IC5701 XTAL OSC EEPROM VIDEO/AUDIO DSP, 16M SDRAM A/D CONVERTER DV SIGNAL PROCESS 32M FLASH 16M SDRAM USB CONTROL, IC2201 (11/18) (11/18) D/A CONVERTER, (3/18) (3/18) (7/18) (12/18) (12/18) MEMORY STICK LENS CONTROL Hi8/Std8 VTR PROCESS INTERFACE, (2/18) (5/18) MODE CONTROL (11/18) MS VCC ON 286 CAM DD ON TRV460/TRV460E/TRV461E CAM DD ON 131 CAM DD ON

3-15 3-16 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

3. BLOCK DIAGRAMS

3-9. POWER BLOCK DIAGRAM (3/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

SI-041 BOARD

D753, 754 (IR EMITTER) CN754 MT 5V 21 22 IC751 D 2.8V 24 REMOTE COMMANDER RECEIVER D759 A (TALLY) POWER(1/3) (PAGE 3-14) SE751, 752 FP-792 FLEXIBLE BOARD A 2.8V 26 PITCH, YAW 27 SENSOR D001 – 003 (VIDEO LIGHT)

VL+ LND754 36

PD-205 BOARD LCD901 CN6004 CN6001 Q6006 PANEL 13.3V VDD 19 18

2.5INCH PANEL 4.6V IC6002 COLOR 18 5 4 VDOG 16 LCD UNIT 1 2.8V REG L6001 D6001

C IC6001 LCD DRIVER POWER(1/3) (PAGE 3-14) 28 EXTDA BL CONT 4 29 FBACK XPOFF 16

T6001, Q6003 CN6003 L6002 L6003 INVERTER BL REG BL HIGH ND901 2 TRANSFORMER 10 BACK BACKLIGHT LIGHT DRIVE

3-17 3-18E DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAMS 1 2 345 6789 10 1112 1314 15 16 17 18 19 20 21

FRAME SCHEMATIC DIAGRAM A

CN951 14P

V4 14

V3 13 V2 12 V1 11 B M2000: TRV460/TRV460E/TRV461E GND 10 M2200: TRV360/TRV361 H2 9 FFC-005 H1 8 FLEXIBLE LENS CD-472 RG 7 FLAT CABLE EVF BLOCK GND 6 M2000/M2200 MECHANISM DECK BLOCK BOARD CAM_15V 5 VSHT 4

CAM_-7.5V 3 LCD902 B/W C GND 2 LCD UNIT CCD_OUT 1 LM SENSOR_VCC HI8_MP C_LOCK_SW GND GND TAPE_END(C) S_REEL(-) ME/MP FE(Y) TAPE_TOP(C) S_REEL(+) TAPE_LED(A) REG_GND HALL_COM DEW M-SW(A) M-SW(B) M-SW(C) FG1 FG VCC FG2 REG_GND CAP_U CAP_U CAP_W CAP_W CAP_V CAP_V VH+ HU1 HU2 HV1 HV2 HW1 HW2 VH- YEVEN(SP2Y) XEVEN(SP2X) YODD(SP1Y) XODD(SP1X) GND GND FE(X) TAPE_LED(K) T_REEL(+) T_REEL(-) REC_PROOF GND COM FG PG V V U W W U FG-PG_COM D FP FP FP FP 2 1 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 15 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 11 10 14 13 12 11 10 10 22 21 20 19 18 17 16 15 14 13 12 11 10 10 11 12 13 14 NC NC ANA_GND DIG_GND VIDEO_IN VSYNC HSYNC EVF_4.6V NSLEEP 3.3V V V U U W W 2P FG V1 V2 V3 V4 H1 H2 PG RG 15P 14P 11P VH- FG1 FG2 22P 24P VH+ HV1 HV2 10P HU2 HU1 GND GND GND GND GND GND GND GND GND 9 8 7 6 5 4 3 2 1 HW2 HW1 DEW COM FE(X) FE(Y) 10 VSHT LM(-) TEMP TEMP LM(+) CAP_V CAP_V CAP_U CAP_U ME/MP FG VCC CAP_W CAP_W HI8_MP ZOOM_A ZOOM_B M-SW(A) M-SW(C) M-SW(B) FOCUS_B FOCUS_A CN1013 8P CCD_OUT CAM_15V REG_GND REG_GND T_REEL(-) ZOOM_XB ZOOM_XA S_REEL(-) T_REEL(+) LENS_DET S_REEL(+) FOCUS_XB FOCUS_XA CAM_-7.5V CN2401 HALL_COM IR_SWITCH IR_SWITCH FG-PG_COM REC_PROOF IRIS_BIAS(-) C_LOCK_SW YODD(SP1Y) XODD(SP1X) CN3201 IRIS_BIAS(+) CN1501 CN2402 IRIS_HALL(-) CN2404 TAPE_LED(K) TAPE_LED(A) TAPE_TOP(C) CN2403 CN1551 TAPE_END(C) IRIS_HALL(+) YEVEN(SP2Y) XEVEN(SP2X) 3.3V 1 SENSOR_VCC IRIS_DRIVE(-) IRIS_DRIVE(+) FC_SENSE_VCC FC_SENSE_OUT ZM_SENSE_VCC ZM_SENSE_OUT NSLEEP 2 E EVF_4.6V 3 HSYNC 4 FP-797 FP-792 VSYNC 5 FLEXIBLE MIC901 MICROPHONE VIDEO_IN 6 FLEXIBLE R L DIG_GND 7 ANA_GND 8 BOARD CN1009 16P XS/S_SW 1 F REG_GND 2

4 3 2 1 XMODE_SW 3

VL+ XPOWER_SW 4 4P

GND GND CN754 36P CN1001 36P CHARGE_LED_VDD 5 REG_GND REG_GND VL+ 36 1 VL+ XCHARGE_LED 6 CONTROL CN753 INT_MIC_L INT_MIC_R MIC_GND 35 2 MIC_GND XCAM_LED 7 MIC_GND 34 3 MIC_GND XMEM_LED 8 KEY INT_MIC_L 33 4 INT_MIC_L XVTR_LED 9 LND754 LND757 LND763 G INT_MIC_R 32 5 INT_MIC_R MODE_LED_VDD 10 BLOCK VREF1 31 6 VREF1 D_2.8V 11 LIA1 30 7 LIA1 ZOOM_VR 12 (SS-5100) CN1011 16P LIA2 29 LIA2 REG_GND 8 16 XCS_EEP 13 28 VREF2 9 VREF2 15 EEP_SI KEY_AD5 14 27 A_2.8V 10 A_2.8V 14 EEP_SO XPHOTO_FREEZE 15 26 A_2.8V 11 A_2.8V 13 XLANC_POWER_ON XEJECT_SW 16 XF_TALLY_LED 25 12 XF_TALLY_LED 12 LANC_IN CN1015 8P

24 D_2.8V MS_SCLK H D_2.8V 13 11 LANC_OUT 1 23 XSIRCS_SIG MS_LED_ON XSIRCS_SIG 14 10 REG_GND VC-345 BOARD 2 MT_5V 22 MT_5V D_2.8V 3 15 CPC 9 RF_MON 21 MT_5V 16 MT_5V (FOR CHECK) REG_GND 4 8 REG_GND (FOR JIG) SIRCS_PWM/IR_DRV_EN 20 SIRCS_PWM/IR_DRV_EN SI-041 17 7 N.C MS_XIN 5 AV_JACK_IN 19 AV_JACK_IN 18 6 REG_GND MS_DIO 6 AUDIO_L_I/O 18 AUDIO_L_I/O BOARD 19 5 SW_DIR MS_BS 7 AUDIO_R_I/O 17 AUDIO_R_I/O USB_3.1V 20 4 CAP FG 8 REG_GND 16 REG_GND I 21 3 BPF MONI CN1016 8P

VIDEO_I/O 15 FP-796 FLEXIBLE VIDEO_I/O VSS 1 22 2 8mm PB RF REG_GND 14 REG_GND BS 2 23 1 EEP_SCK S_Y_I/O 13 24 S_Y_I/O VCC 3 MEMORY CN752 5P XS_JACK_IN 12 25 XS_JACK_IN DIO 4 MEMORY STICK 1 VCC S_C_I/O 11 26 S_C_I/O INS 5 STICK FP-799

2D- REG_GND 10 27 REG_GND SCLK 6 FLEXIBLE CONNECTOR 3D+ NTPA 9 28 NTPA VCC 7 (USB) J 4ID TPA 8 29 TPA VSS 8 5GND REG_GND 7 30 REG_GND CN4001 6P TPB 6 31 TPB BATT_GND 1

NTPB 5 32 NTPB BATT/XEXT 2 BT901 REG_GND 4 33 REG_GND ACV_GND 3 CN751 4P BATTERY USB_D- 3 34 USB_D- ACV_UNREG 4 TERMINAL

1NTPB 20P USB_D+ 2 35 USB_D+ BATT_SIG 5 2 TPB DV USB_DET 1 36 USB_DET BATT_UNREG 6 3NTPA PANEL_REV PANEL_13.3V PANEL_4.6V REG_GND VD_SI(HDO) VD_SO VD_SCK XCS_LCD_DA C-SYNC/XHD PANEL_XVD PANEL_R PANEL_G PANEL_B TP_Y TP_SEL1 TP_X BL_CONT BL_GND BL_REG SE_GND CN1003 K 4 TPA 8 7 6 5 4 3 2 1 9 20 19 18 17 16 15 14 13 12 11 10

LCD901(1/2) PD-124 2.5INCH COLOR

HARNESS 2P LCD UNIT 22P SP(+) SP(-) 8 7 6 5 4 3 2 1 9 20 19 18 17 16 15 14 13 12 11 10 N.C N.C REG_GND N.C LI_3V D_2.8V KEY_AD0 BATT_INFO CUSTOM_LED_VDD XCUSTOM_LED_ON REG_GND XMS_LED MS_LED_VDD KEY_AD1 D_2.8V KEY_AD3 D_2.8V KEY_AD2 DIAL_A DIAL_B REG_GND XRESET CN1008 CN1007 ND901 1 2 3 4 5 6 7 8 9 1 2 10 11 12 13 14 15 16 17 18 19 20 21 22 L 20P BACKLIGHT TP_Y TP_X LCD901

VD_SO (2/2) BL_REG VD_SCK BL_GND SE_GND TP_SEL1 PANEL_B PANEL_R BL_CONT PANEL_G TOUCH REG_GND PANEL PANEL_REV PANEL_XVD VD_SI(HDO) PANEL_4.6V C-SYNC/XHD CN6001 XCS_LCD_DA PANEL_13.3V CN6005 6P 6 5 4 3 2 1 1 9 8 7 6 5 4 3 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 6 SE_GND 10 SP901 SPEAKER

5 SE_GND B R G CONTROL 6P CS EN 10P N.C N.C N.C N.C N.C N.C 24P LED REF HST VSS VDD DWN VCK VST COM RGT N.C. N.C. TP_L TP_R SOUT WIDE VDOG 4 N.C. PSIG HCK1 HCK2 TEST2 CRext VVSSG TEST1 TP_TOP TP_BOT

BL_LOW CONTROL N.C. BL_HIGH

KEY LED_GND 3 M CN6007 2 PANEL_REV CN6003 CN6004 KEY BLOCK PANEL_REV PD-205 1 (PR-5100) BOARD BLOCK (CF-5100)

4-1 4-2 FRAME DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS

Link

CD-472 BOARD (CCD IMAGER) CONTROL KEY BLOCK (SS-5100)

PD-205 BOARD CONTROL KEY BLOCK (PR-5100) (LCD DRIVER, BACKLIGHT DRIVE) SI-041 BOARD (STEADYSHOT, JACK) CONTROL KEY BLOCK (CF-5100) FP-792 FLEXIBLE BOARD FP-228, FP-299, FP-300, FP-301, FP-302, FP-802 FLEXIBLE BOARD

COMMON NOTE FOR SCHEMATIC DIAGRAMS DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS

THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block)

(For schematic diagrams) 1. Connection ¥ All capacitors are in µF unless otherwise noted. pF : µ LinkµF. 50 V or less are not indicated except for electrolytics Pattern box and tantalums. ¥ Chip resistors are 1/10 W unless otherwise noted. kΩ=1000 Ω, MΩ=1000 kΩ. ¥ Caution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum 1 m capacitor, Because it is damaged by the heat. ¥ Some chip part will be indicated as follows. Example C541 L452 22U 10UH TA A 2520 Front of the lens Kinds of capacitor Case size External dimensions (mm)

¥ Constants of resistors, capacitors, ICs and etc with XX indicate that they are not used. 2. Adjust the distance so that the output waveform of In such cases, the unused circuits may be indicated. Fig. a and the Fig. b can be obtain. ¥Parts with ★ differ according to the model/destination. H Refer to the mount table for each function.

¥ All variable and adjustable resistors have characteristic ellow Y Cyan curve B, unless otherwise noted. White Magenta Green Red

¥ Signal name Blue XEDIT → EDIT PB/XREC → PB/REC ¥ 2: non flammable resistor ¥ 5: fusible resistor ¥ C: panel designation ¥ A: B+ Line AABBA=B ¥ B: BÐ Line Fig. a (Video output terminal output waveform) ¥ J : IN/OUT direction of (+,Ð) B LINE. ¥ C: adjustment for repair. ¥ A: VIDEO SIGNAL (ANALOG) ¥ A: AUDIO SIGNAL (ANALOG) ¥ A: VIDEO/AUDIO SIGNAL ¥ A: VIDEO/AUDIO/SERVO SIGNAL ¥ A: VIDEO/SERVO SIGNAL ¥ A: SERVO SIGNAL ¥ Circled numbers refer to waveforms. Fig.b (Picture on monitor TV) (Measuring conditions voltage and waveform) ¥Voltages and waveforms are measured between the measurement points and ground when camera shoots When indicating parts by reference number, please color bar chart of pattern box. They are reference values include the board name. and reference waveforms. (VOM of DC 10 MΩ input impedance is used) ¥Voltage values change depending upon input impedance of VOM used.)

Note : The components identified by mark 0 or Note : Les composants identifiés par une marque dotted line with mark 0 are critical for safety. 0 sont critiques pour la sécurité. Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifie.

4-5 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS CD-472 BOARD

For Schematic Diagram ¥ Refer to page 4-57 for printed wiring board. 1 2 3 4 56 7 8 9

CD-472 BOARD 1 IC951 1 REC 2 IC951 2 REC 3 IC951 3 REC A CCD IMAGER 7.6 Vp-p 22 Vp-p 7.6 Vp-p XX MARK:NO MOUNT NO MARK:REC/PB MODE V V V R:REC MODE P:PB MODE LND951

C954 XX 4 B IC951 4 REC

22 Vp-p

V IC951 R-7.2 /P0 R-7.2/P0 R-0.3/P0 R-0.3/P0 R11.5/P0 1 2 3 4 5 67 CN951 14P CCD IMAGER IC951 14

V4 V4 V3 V2 V1 NC GND V3 13 C ICX219CKA-43:TRV360 V2 12 /TRV361 CCD_OUT /TRV460 5 7 V1 11 IC951 REC ICX223CKA-43:TRV460E VC-345 GND 10 /TRV461E (1/18) H2 9 1.9 Vp-p CN1501 H1 8 RG VL

THROUGH THE FFC-005 SUB NC H1 H2 VDD FLEXIBLE FLAT CABLE RG 7 R969 XX 9 8 H 6 14 13 12 11 10 PAGE 4-9 GND of LEVEL3 D CAM_15V 5 D951 /P0 /P0

XX /P0 R1.3 R1.6 /P0.4 R-7.6 VSHT 4 R12.5

R15.0/P0 C957

CAM-7.5V 3 R10.2/P0.1 XX GND 2

CCD_OUT 1 R970 0 9 IC951 q; REC R968 XX 22 Vp-p E C955 0.1u R15/P0 H L951 100uH Q951 2SC4178-F13F14-T1 BUFFER R11.5 /P0 8 IC951 qs REC R952 R10.7 C953 C951 C952 82 R953 /P0 22u 47u SIGNAL PATH XX 3300 10V F 16V 2.6 Vp-p VIDEO SIGNAL 6 IC951 qf REC 7 IC951 qd REC 13.5 MHz Y/CHROMA Precautions for Replacement of CCD Imager 3.6 Vp-p 3.6 Vp-p ¥ The CD-472 board mounted as a repair part is not equipped REC with a CCD imager. When replacing this board, remove the CCD imager from the H H old one and mount it onto the new one. G ¥ If the CCD imager has been replaced, carry out all the adjustments for the camera section. ¥As the CCD imager may be damaged by static electricity from its structure, handle it carefully like for the MOS IC. 05 In addition, ensure that the receiver is not covered with dusts nor exposed to strong light.

4-7 4-8 CD-472 Schematic diagrams of the VC-345 board are not shown. Pages from 4-9 to 4-44 are not shown. DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS PD-205 BOARD

For Schematic Diagram ¥ Refer to page 4-63 for printed wiring board.

1 2 345 6789 10 1112 1314 15 16 17 18

PD-205 BOARD A LCD DRIVER,BACKLIGHT XX MARK:NO MOUNT NO MARK:REC/PB MODE 2 IC6001 el REC/PB 3 IC6001 r; REC/PB 6 IC6001 wg REC/PB 7 IC6001 wa REC/PB 8 IC6001 w; REC/PB 4.7

1 IC6002 4.7 2.8V REG 2 IC6002 360 mVp-p 360 mVp-p 5.0 Vp-p 7.0 Vp-p 7.0 Vp-p C6029 1.3 2.8 TK11128CSCL-G

0.1u 3 45 6.3V CN6001 20P Q6006 H H 2H 2H 2H NDS356AP B C6025 FB6002 PANEL_REV 20 XX VDD SWITCH XX 13.4 13.4 PANEL_13.3V 19 FB6001 R6021 PANEL_4.6V 18 C6016 XX 100k XX REG_GND 17 0.1 SO

VD_SI(HDO) 16 EN XPOFF VST VCK

SI L6001 DWN VD_SO 15 47uH C6006 SCK 0.01u VD_SCK 14 XCS VC-345 XCS_LCD_DA 13 C6019 C6001 C6002 C6020 XHD 22u 0.1u 1u 3.3u

C (18/18) C-SYNC/XHD 12 4V XLED BLDET

25V EXTDA CN1003 XVD PANEL_XVD 11 THROUGH THE C6014 PANEL_R 10 PD-124 HARNESS R6018 4.7u VP 10V PAGE 4-44 PANEL_G 9 1 ek 2.6 XX of LEVEL3 IC6001 REC/PB

PANEL_B 8 0.1 1.4 2.5 2.8 1.9 2 13.4 7 TP_Y 7 36 35 34 33 32 31 30 29 28 27 26 25 340 mVp-p CN6004 24P TP_SEL1 6 EN VP 24 TEST1 VST VSS VCK DWN PWM XLED TP_X 5 VCC3 BLDET FBACK D EXTDA 23 COM BL_CONT 4 H CL6008 VST 22 VST BL_GND 3 VCK 21 VCK 37 BL_REG 2 VDD NC 24 EN 2.8 20 EN SE_GND 1 C6003 0.01u 4 IC6001 rs REC/PB 6.7 DWN

38 BIN COM 23 19 DWN 1.7 C6004 0.01u 13.4 CL6012 18 VDD

39 GIN VCC2 22 1.7 2.8 Vp-p 17 VSS C6005 0.01u 7 D6001

40 RIN VB 21 CL6004 VB RD3.3UM-T1B 16 VDOG 1.7 LCD901 7.1 CL6005 VG 15 VVSSG C6017 (1/2) E 41 SCAN V VG 20 2.5INCH VR 1u 14 CS XVD 7 WIDE COLOR CN6005 6P RB6001 LCD 42 XVD VR 19 CL6006 13 WIDE 2.8 10 HST UNIT XHD PANEL_REV 1 IC6001 12 HST

43 HD LCD DRIVER GND2 18 REF CONTROL PANEL_REV 2 2.7 11 REF IC6001 C6018 KEY CXA3622BR-T4 C6015 0.1u N.C. 3 44 VCC1 GND1 17 0.1u 10 SOUT BLOCK 2.8 16V XCS N.C. 4 0 XPOFF R6023 9 CRext (PR-5100) 150k 45 XCS XPOFF 16 HCK2 PAGE 4-50 2.8 SE_GND 5 SCK 8 HCK2 of LEVEL2 0.2 WIDE HCK1

F SE_GND 6 46 XSCK WIDE 15 7 HCK1 2.7 SI 0.1 HST 6 PSIG 14 47 SI HST VG 0.2 5 G SO R6030 470 2.8 VR 13 48 SO VDD 4 R 2.7 VB 3 B RGT 2 RGT 13.4 1 TEST2 R6022 5 IC6001 rd REC/PB XWRT/CLKIN RGT HCK1 HCK2 HDO REF OP_OUT OP_IN XCLR Filter2 Filter VSS 10k 1 2 3 4 5 6 7 8 9 10 11 12 7.6 G Q6005

2.8 Vp-p 0 HN1B04FE-Y/GR(TPLR3) 2.8 1.4 1.4 1.4 1.4 2.6 1.3 1.2 4 6 9 IC6001 ql REC/PB VP 5 2 R6026 H 7 7.6 CN6007 6P XX 3 1 CL6002 7.0 Vp-p 7 TP_R 1 C6022 R6019 XX TP_L 2 10k R6008 6.4 LCD901 N.C. 3 2H (2/2) XX CL6011 1 3 H TOUCH TP_BOT 4 Q6007

R6027 HCK1 HCK2 PANEL XX RGT REF C6010 5 XX 2 TP_TOP 5 560p R6012 10k 1/16W 0.5% 7 6.4 N.C. 6 D6006 ± XX 6 4 R6013 100k 13.4 C6009 R6009 1/16W ± 0.5% 7 0.1u 68k Q6004 HN1B04FE-Y/GR(TPLR3) Q6004,6005 PSIG DRIVE C6027 XX I C6028 R6029 2200p EXTDA XX Q6009 UP04111008S0

2.8 2.8 R6028 L6002 L6003 R6005 XX 4.7uH 82uH 1800 1 4 1/10W 5 2.8 2.8

2 5 1 J 6 3 6 0 2 2.8 C6011 3 SIGNAL PATH 0.015u CN6003 10P Q6008,6009 2.8 0 TOUCH PANEL -0.6 4 10 10 BL_HIGH I/F 6 3 -0.6 VIDEO SIGNAL 2 5 C6013 9 N.C 12p 0 2.8 2 1 6 4 8 N.C CHROMA C6007 3 4.7u 5 1 3 T6001 Q6008 1 4 7 N.C 10V INVERTER UP04111008S0 5.5 5.5 TRANSFORMER 6 N.C ND901 K BACKLIGHT REC 4 Q6002 2 5 Q6003 XX TPC6C01(TE85R) 5 N.C INVERTER DRIVE 4 N.C PB R6011 3 BL_LOW XX 2 LED (N,C)

Q6001 1 LED_GND (SE_GND) XX D6005 D6002 XX XLED D6004 XX MA111-(K8).S0 L BLDET R6001 XX R6010 C6012 R6014 22k 0.1u 470 LND605 R6002 XX A D6003 XX The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont 05 line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified. par une piéce portant le numéro spécifié.

PD-205 4-45 4-46 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS SI-041 BOARD, FP-792 FLEXIBLE BOARD

For Schematic Diagram ¥ Refer to page 4-65 for printed wiring board.

1 2 3 4 567 8 9 10 11 12

SIGNAL PATH

A VIDEO SIGNAL AUDIO CHROMA Y Y/CHROMA SIGNAL FP-792 FLEXIBLE BOARD VIDEO LIGHT REC D002 NSPW500BS-TL2 PB REG_GND 1 VL+ B D001 D003 D001-003 NSPW500BS-TL2 NSPW500BS-TL2 (VIDEO LIGHT)

LAND1 3 STATIC_GND REG_GND

STATIC_GND LAND2

C SI-041 BOARD LND757 REG_GND 1 STEADYSHOT,JACK LND754 XX MARK:NO MOUNT VL + NO MARK:REC/PB MODE LND763 REG_GND 3 D R760 XX Note: CN751, CN752, D753, D754, IC751, J751 and J752 are R759 MIC901 C754 MICROPHONE not included in SI-041 complete board. XX XX 1.3 CN753 4P

2.8 1.3 1 INT_MIC_L Vref1 LIA1 R761 L GND 342.8V XX 2 GND 1 2 3 INT_MIC_R R 4 GND SE751 SE752 LINE YAW PITCH SENSOR SENSOR CN754 36P LINE Vref2 1 2 LIA2 E GND 342.8V 36 VL+ C Y 1.3 1.3 2.8 35 MIC_GND 4 3 C753 S1 S2 XX 34 MIC_GND C 4V R762 J751 6 Y 5 C751 XX S S C759 33 INT_MIC_L S VIDEO XX 4.7u S S 32 INT_MIC_R 8 G G 7 C758 C755 VDR757 XX 1 C757 S3 2 S4 4.7u XX XX 31 VREF1 4V CGND YGND FB751 30 LIA1

IC751 XX R754 29 LIA2 F REMOTE COMMANDER RECEIVER 28 VREF2 IC751 D759 RPM7240-V4 TLRMV1021(T15SOY,F) 27 A_2.8V R751 (TALLY) LINE R763 26 A_2.8V 1 GND XX 1k 2 L 2.8 VCC 3 J752 3 V LINE 25 XF_TALLY_LED 4 BR GND 2 A/V 5 SW 24 D_2.8V 7 R 2.8 R OUT 1 23 XSIRCS_SIG R755 6 NC LINE R752 22 MT_5V D754 56 XX Q751 SI50-RH51CSH870IT 2SD2114KT146 (IR EMITTER) 21 MT_5V VC-345 G LED DRIVE 20 SIRCS_PWM/IR_DRV_EN (9/18) 3 CN1001 R753 19 AV_JACK_IN D753 56 C752 LINE THROUGH THE SI50-RH51CSH870IT XX 18 AUDIO_L_I/O 0.2 (IR EMITTER) LINE FP-796 FLEXIBLE 17 AUDIO_R_I/O PAGE 4-25 D756 D752 D751 16 REG_GND of LEVEL3 RSE6.8XN-TR RSE6.8XN-TR RSE6.8XN-TR LINE LND765 15 VIDEO_I/O STATIC_GND 14 REG_GND LINE LINE 13 S_Y_I/O H LINE 12 XS_JACK_IN LINE LINE 11 S_C_I/O LINE 10 REG_GND 9 NTPA LINE 8 TPA D755 MA728-(K8).S0 7 REG_GND 6 TPB USB USB R756 0 R764 I 10k 5 NTPB 4 REG_GND LF751 USB USB XX R765 C756 CN752 5P 10k XX 3 USB_D- GND 5 2 USB_D+ USB USB ID 4 R757 1 USB_DET USB USB 0 D+ 3 USB USB (USB) D- 2 USB USB VCC 1 J

LF752 CN751 4P XX TPA 4 NTPA 3 DV TPB 2 K NTPB 1 D760 XX

LND764 STATIC_GND

4-47 4-48 SI-041, FP-792 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS FP-228, 299, 300, 301, 302, 802 FLEXIBLE BOARD

For Schematic Diagram ¥ Refer to page 4-67 for printed wiring board.

FP-302 FP-802 FLEXIBLE FP-300 1 2 345 FLEXIBLE FLEXIBLE CONTROL KEY BLOCK A Q002 Q001 (SS-5100) TAPE END TAPE TOP XX MARK:NO MOUNT VC-345 • CONTROL KEY BLOCK (SS-5100) is replaced as block, so that PRINTED WIRING BOARD is omitted. (18/18) 1 TAPE_TOP (C) CN1009 PAGE 4-43 2 TAPE_END (C) of LEVEL3 D001 3 TAPE_LED (K) TAPE LED 4 TAPE_LED (A) 5 REG_GND B 6 S REEL (-) VC-345 BOARD FP-301 7 S REEL (+) (15/18) H002 3 2 8 SENSOR_VCC LND001 XS/S_SW REG_GND XMODE_SW XPOWER_SW CHARGE_LED_VDD XCHARGE_LED XCAM_LED XMEM_LED XVTR_LED MODE_LED_VDD D_2.8V ZOOM_VR REG_GND KEY_AD5 XPHOTO_FREEZE S REEL CN2404 XEJECT_SW FLEXIBLE 9 T_REEL (+) PAGE 4-37 STATIC GND 1 2 3 4 5 6 7 8 9 11 16 SENSOR 14 10 12 15 1 4 13 10 T_REEL (-) of LEVEL3 11 HALL_COM ME/MP 12 ME/MP REC PROOF 13 REC_PROOF 2 4 2 H001 3 Hi8 MP S001 T REEL 14 Hi8_MP (START/STOP) 1 SENSOR 4 C S003 S001 15 C_LOCK_SW PHOTO

1 3 D002 D001 D004 D003 S002 1k C.C. LOCK POWER/MODE_SW

POWER R001

(CHG) S004 OFF REG_GND D004 D002 D001 D003 D ON XPOWER_SW CHG TAPE

S901 MEMORY MODE SWITCH 1 DEW XMODE_SW S002 MODE PLAY/EDIT (EJECT) 2 M-SW (A) CAMERA 3 M-SW (B) FP-299 4 M-SW (C) 5 FLEXIBLE 1 FG1 RV001 MR 2 6 FG VCC 20k SENSOR 3 7 FG2 E 4 8 REG_GND W T 9 CAP_U (ZOOM) DEW SENSOR 10 CAP_U 05 11 CAP_W VC-345 BOARD (15/18) 12 CAP_W CN2403 13 CAP_V M902 PAGE 4-37 FP-228 CAPSTAN MOTOR 14 CAP_V of LEVEL3 15 VH+ 1 2 34 16 HU1 FLEXIBLE 3 2 17 HU2 HE 4 1 18 HV1 19 HV2 CONTROL KEY BLOCK 3 2 20 HW1 HE 21 HW2 A 4 1 22 VH- (PR-5100) XX MARK:NO MOUNT 3 2 HE • CONTROL KEY BLOCK (PR-5100) is replaced as block, 4 1 so that PRINTED WIRING BOARD is omitted.

S601 SIGNAL PATH B (PANEL REVERSE)

REC REC/PB PB 1 PANEL_REV

Capstan speed servo 2 PANEL_REV 3 N.C Capstan servo(speed and phase) PD-205 4 N.C CN6005 PAGE 4-45 5 SE_GND of LEVEL2 6 SE_GND C

4-49 05

FP-228, FP-299, FP-300, FP-301, FP-302, FP-802, SS-5100, PR-5100 4-50 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS

1 2 3 45678 9 10 1112

CONTROL KEY BLOCK (CF-5100) A

XX MARK:NO MOUNT • CONTROL KEY BLOCK (CF-5100) is replaced as block, so that PRINTED WIRING BOARD is omitted. S022 S023 R005 S007 R013 R017 R020 R022 S003 R009 S012 S015 EASY (PANEL_O/C_SW) XX 1200 XX 1500 XX 2200 XX 3900 8200 27k

B1 A1 B1 A1 B1 A1 B1 A1 B1 A1 B1 A1 2 1 2 1 2 1 2 1 2 1 2 1

B B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 4 3 B2 A2

D002

EASY

BT001 LITHIUM BATTERY

S016 S020 S004 R006 R010 S011 R014 R018 R023 S019 C S008 BACKLIGHT LIGHT S024 XX 1200 1500 XX 2200 3900 8200 XX XX XX 1 REG_GND N.C B1 A1 B1 A1 B1 A1 B1 A1 B1 A1 B1 2 1 2 1 2 1 1 2 1 2 1 A1 LI_3V 2 D_2.8V R001 10k B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3A2 KEY_AD0 BATT_INFO

CUSTOM_LED_VDD B1 A1 2 1 S001 D 7 1 2 3 4 5 6 B N.C S A DSPL/BATT S005 R007 S009 R011 S013 R015 S017 R019 S021 R021 SW2 4 3 INFO XX 1200 1500 2200 XX 3900 XX 8200 COM XCUSTOM_LED_ON B2 A2 XX XX SW1A SW1B VC-345 REG_GND XMS_LED B1 A1 B1 A1 B1 A1 B1 A1 B1 A1 (18/18) D001 2 1 2 1 2 1 2 1 2 1 CN1007 N.C (MS ACCESS) PAGE 4-44 4 of LEVEL3 MS_LED_VDD R002 10k B2 4 3 A2 B2 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 KEY_AD1

D_2.8V R003 10k E KEY_AD3 D_2.8V

KEY_AD2 R008 R012 R016 S006 S010 S014 S018 R004 1200 1500 2200 DIAL_A 10k XX XX XX XX DIAL_B

REG_GND B1 A1 B1 A1 B1 A1 B1 A1 2 1 2 1 2 1 2 1 22 XRESET

B2 4 3A2 B2 4 3 B2 4 3 A2 B2 4 3 A2 B1 A1 A2 F 2 1 S002

4 3 RESET B2 A2

G LND025 CH GND

VC-345 1 SIGNAL PATH SP(+) (16/18) SP901 CN1008 SPEAKER 2 SP(-) PAGE 4-39 AUDIO of LEVEL3 H SIGNAL PB

4-51 4-52 CF-5100 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-3. PRINTED WIRING BOARDS

Link

CD-472 BOARD FP-792 FLEXIBLE BOARD

FP-228, FP-299, FP-300, FP-301, FP-302, PD-205 BOARD FP-228, FP-299, FP-300, FP-301, FP-302, PD-205 BOARD FP-802 FLEXIBLE BOARD

SI-041 BOARD

COMMON NOTE FOR PRINTED WIRING BOARDS

MOUNTED PARTS LOCATION CIRCUIT BOARDS LOCATION FLEXIBLE BOARDS LOCATION

Board Name Function CD-472 CCD IMAGER PD-205 LCD DRIVE, BACKLIGHT DRIVE SI-041 STEADYSHOT, JACK DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-3. PRINTED WIRING BOARDS

4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS

¥ : Uses unleaded solder. ¥ Chip parts. ¥ : Circuit board Tr ansistor Diode : Flexible board C 6 5 4 4 5 6 5 4 4 5 3 3 3 1 2 3 Pattern from the side which enables seeing. : pattern of the rear side B E 1 2 3 3 2 1 123 3 2 1 2121216 5 4 (The other layers’ patterns are not indicated) ¥ Through hole is omitted. 1 2 2 1 3 4 3 4 1 2 3 4 433 4 ¥ Circled numbers refer to waveforms. ¥ There are a few cases that the part printed on diagram 5 4 3 345 2 1 2 1 4 3 2 1 122 1 isn’t mounted in this model. 3 4 6 5 4 4 5 6 ¥ C: panel designation

2 1 1 2 3 3 2 1

Pattern Board Name Parts Location Total Number of Layers Layers Not Indicated CD-472 Ð 8 layers 2 to 7 layers PD-205 4-71 2 layers Ð SI-041 4-71 2 layers Ð FP-792 Flexible Ð 1 layer Ð FP-228 Flexible Ð 1 layer Ð FP-299 Flexible Ð 1 layer Ð FP-300 Flexible Ð 1 layer Ð FP-301 Flexible Ð 1 layer Ð FP-302 Flexible Ð 1 layer Ð FP-802 Flexible Ð 1 layer Ð

4-55 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

CD-472

Note for Printed Wiring Board (See page 4-55).

: Uses unleaded solder. CD-472 BOARD 14 13

C953 L951

R952 C R953

2 B E C952 1 C951 C954 Q951 1 5

1 7

2 3 4 R970 R969

LND951 R968

IC951 D951 C957

C955 7 8

14 8

6 9 1-860-937- 11

4-57 4-58 CD-472 Printed wiring boards of the VC-345 board are not shown. Pages from 4-59 to 4-62 are not shown. DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION

PD-205

Note for Printed Wiring Board (See page 4-55).

: Uses unleaded solder. PD-205 BOARD

L6002

Q6007 C6007 B C E A R6027

PIN007 + C6019 A C6011 LND605 D6006 R6026 C6022 L6003 PIN001 Q6002 Note: Q6002 and Q6003 have the same mount location. C6001 C6004 C6003 C6005 2 1 3 4 5 When replacing Q6002 or Q6003, please refer to L6001 R6030 5 1 PIN005 Q6003 schematic diagram and electrical parts list. 6 5 4 FB6002 R6005 PIN006 1 2 3 48 37 36 1 5 4 3 2 1

4 + PIN004 CN6001 3 2 C6009 R6008 IC6001 C6020 A C6010 8 7 C6006

B R6009 9 12 25 T6001 R6013 R6012 13 24 R6018 C6002

206 1 RB6001 FB6001

C6025 CL6006 CL6005 610 CL6004 54 123 Q6005 R6019 Q6004

PIN008 C6029 1 IC6002 C6027 R6029 D R6001 C6013 R6022 G S Q6006 CN6005 R6023 Q6008 6 CL6011 R6028 D6002 C C6016 R6021 C6017 CL6008 C6018 Q6009 C6028 D6004

C6015 CL6012 PIN002 D6001 C6014 PIN009 D6003 R6010 1 6 R6002 E B C6012 CL6002 1 24 PIN003 R6014 Q6001 1 10 C CN6004 CN6007 CN6003 R6011

HF001 D

D6005 1-860-939- 11

05 1 2 3 4 5

PD-205 4-63 4-64 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION

SI-041, FP-792 FLEXIBLE D001 D002 (VIDEO LIGHT) (VIDEO LIGHT) Note for Printed Wiring Board (See page 4-55).

: Uses unleaded solder.

FP-792 FLEXIBLE BOARD

FP-792 1-860- 929-

1-860-929- 11

D003 (VIDEO LIGHT) 13

Note: CN751, CN752, D753, D754, IC751, J751 and J752 are SI-041 BOARD (SIDE A) SI-041 BOARD (SIDE B) not included in SI-041 complete board.

5 7

3 LND765 A J752 A A/V LND757 LND763

2 1 LND754 C Q751 BE D753 R759 C754 D753, 754 C752 C757 R762 (IR EMITTER) 5

A 24 1 R753 R752 R755 R751 C751 2 CN751 C755 3 B DV B SE752 R763 (PITCH) D754 4

6 36 35 SE751

(YAW) 1 3 C758

D759 3 13 (TALLY) 24 R761 A

C753 IC751 R760 FB751 6 C759 1 R754 1 D751

LF752 CN754 3 CN752

C 42 C 5 D752 (USB) 7 D756 R756 R764 LF751

3 4 5 6 R757 2 1 R765 J751 1 2 7 8 C756 D755 LND764 3 2 1 S VIDEO

D VDR757 D760 D

4 5 4 1 CN753 1-860-941- 11 1-860-941- 11

05 1 2 3 4 05 4 3 2 1

4-65 4-66 SI-041, FP-792 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS

FP-228, FP-299, FP-300, FP-301, FP-302, FP-802 FLEXIBLE Note for Printed Wiring Board (See page 4-55). FP-300 FLEXIBLE (COMPONENT SIDE) : Uses unleaded solder.

Q001 TAPE TOP 1-680-436- SENSOR

1 15

11 1 15 FP-299 FP-802 FLEXIBLE 15 1 S002 FLEXIBLE (CONDUCTOR SIDE) C.C. LOCK M902 D001 CAPSTAN S001 TAPE LED MOTOR REC PROOF o'

H001 MR SENSOR T REEL 1 4 SENSOR

DEW SENSOR

21 1-677-049-

FP-228 1-680-437- 11 FLEXIBLE FP-301 FLEXIBLE S901 MODE (CONDUCTOR SIDE) SWITCH C 1-680-434- B 11 A COM

H002 FP-302 FLEXIBLE S REEL 1 SENSOR (CONDUCTOR SIDE)

o' 1-689-290- 11 22

Q002 1-680-438- TAPE END SENSOR 11 4-67

FP-228, FP-299, FP-300, FP-301, FP-302, FP-802 4-68 Mounted parts location of the VC-345 board is not shown. Pages 4-69 and 4-70 are not shown. DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

4-3. PRINTED WIRING BOARDS

4-4. MOUNTED PARTS LOCATION no mark : side A * mark : side B PD-205 BOARD SI-041 BOARD

C6001 A-2 C758 B-4 C6002 B-2 C759 C-3 C6003 A-3 C6004 A-2 * CN751 B-1 C6005 A-2 * CN752 C-1 C6006 B-3 * CN753 D-4 C6007 A-4 * CN754 C-4 C6009 B-2 C6010 B-2 D751 C-2 C6011 A-5 D752 C-2 C6012 C-4 * D753 B-2 C6013 C-4 * D754 B-2 C6014 C-3 * D755 D-3 C6015 C-2 D756 C-2 C6017 C-2 D759 C-2 C6018 C-2 C6019 A-3 FB751 C-4 C6020 B-3 C6028 C-4 * IC751 C-2 C6029 C-2 * J751 D-2 CN6001 B-1 * J752 A-1 CN6003 D-4 CN6004 D-2 Q751 A-2 CN6005 C-1 CN6007 D-3 R752 B-2 R753 B-2 D6001 C-2 * R756 C-3 D6004 C-4 * R757 D-3 R763 B-2 IC6001 B-2 * R764 C-3 IC6002 C-2 * R765 D-3

L6001 A-3 SE751 B-3 L6002 A-4 * SE752 B-3 L6003 A-4

Q6003 A-4 Q6004 C-2 Q6005 C-2 Q6006 C-3 Q6008 C-3 Q6009 C-3

R6005 B-4 R6009 B-2 R6010 C-4 R6012 B-2 R6013 B-2 R6014 C-4 R6019 C-2 R6021 C-3 R6022 C-2 R6023 C-2 R6030 B-2 RB6001 C-4

T6001 B-4

4-71E PD-205, SI-041 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

NOTE

5. REPAIR PARTS LIST

NOTE: Characters A to L of the electrical parts list indicate location of exploded views in which the desired part is shown. Link EXPLODED VIEWS

ABCD

OVERALL ASSEMBLY FRONT PANEL BLOCK LENS BLOCK LCD BLOCK

EFGH

CABINET R BLOCK EVF BLOCK BATTERY PANEL BLOCK MD FRAME BLOCK

I JKL CASSETTE COMPARTMENT MECHANICAL CHASSIS MECHANICAL CHASSIS ASSEMBLY, DRUM ASSEMBLY LS CHASSIS BLOCK ASSEMBLY BLOCK ASSEMBLY-1 BLOCK ASSEMBLY-2

Link ELECTRICAL PARTS LIST ACCESSORIES

CD-472 BOARD C FP-302 FLEXIBLE BOARD J PD-205 BOARD D

FP-300 FLEXIBLE BOARD J FP-792 FLEXIBLE BOARD B SI-041 BOARD B

FP-301 FLEXIBLE BOARD J FP-802 FLEXIBLE BOARD J DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

NOTE: ¥ -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. ¥ Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The components identified by mark 0 or ¥The mechanical parts with no reference number in the exploded views are not dotted line with mark 0 are critical for safety. supplied. Replace only with part number specified. ¥ Due to standardization, replacements in the parts list may be different from Les composants identifiés par une marque the parts specified in the diagrams or the components used on the set. 0 sont critiques pour la sécurité. ¥ CAPACITORS: Ne les remplacer que par une pièce portant le numéro spécifié. uF: µF ¥ COILS uH: µH ¥ RESISTORS All resistors are in ohms. METAL: metal-film resistor METAL OXIDE: Metal Oxide-film resistor F: nonflammable ¥ SEMICONDUCTORS In each case, u: µ, for example: uA...: µA... , uPA... , µPA... , uPB... , µPB... , uPC... , µPC... , uPD..., µPD... ¥Abbreviation AUS: Australian model CND : Canadian model EE : East European model NE : North European model

5-1 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1. EXPLODED VIEWS 5-1-1. OVERALL ASSEMBLY

6 EVF block (See page 5-7.)

2 2 2 2

5 7 11 2 MD frame block (See page 5-9.) Battery panel block (See page 5-8.)

2 10 3 8 2 4 9 Cabinet R block (See page 5-6.)

Front panel block 11 (See page 5-3.) 2 2 11 LCD block Lens block (See page 5-5.) (See page 5-4.)

Ref. No. Part No. Description Ref. No. Part No. Description 1 X-3954-008-1 CABINET (C) (595) ASSY, P 7 3-087-810-01 LID (51), CPC 2 3-080-203-31 SREW (M2), LOCK ACE, P2 8 COUTION RETAINER (51), EVF FLEXIBLE 3 3-087-813-01 COVER (51), JACK 9 3-079-012-01 SCREW (30), TRIPOD 4 3-087-812-41 SHEET (51), JACK 10 3-087-831-21 LABEL (51) (TRV360/TRV361) 5 3-087-811-01 CABINET (UPPER) (51) 10 3-087-831-31 LABEL (51) (TRV460/TRV460E/TRV461E)

6 3-078-889-11 SCREW (M1.7) 11 3-080-204-21 SCREW, TAPPING, P2

CAUTION : For the part of 8 : RETAINER (51), EVF FLEXIBLE (3-088-616-01), cut WOVEN (T0.25), FABRIC NON (3-076-631-01) into the desired length and use it. 5-2 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1-2. FRONT PANEL BLOCK ns: not supplied 61 60

D001 D002

J752 D003 58 CN751 58 D753 ns D754

CN752 SI-041 IC751 J751

58 59 53 57 56

55 ns

54 58 ns

62 52

MIC901

51 (Note) CN751, CN752, D753, D754, IC751, J751 and J752 are not included in SI-041 complete board.

Ref. No. Part No. Description Ref. No. Part No. Description 51 3-087-738-11 RETAINER (51), MICROPHONE CN751 1-794-276-11 CONNECTOR, SQUARE TYPE 4P (DV) (Note) 52 3-087-740-01 PLATE (51), MAGNIFICATION CN752 1-794-962-11 CONNECTOR, SQUARE TYPE (USB 5P) (USB) 53 X-3954-009-1 PANEL (595) ASSY, FRONT (Note) 54 3-087-739-01 PLATE (51), NAME D001 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT) 55 3-087-743-01 SCREW (51), FILTER D002 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT) D003 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT) 56 3-087-742-01 RING (51), FRONT 57 3-087-749-01 COVER (51), S TERMINAL D753 8-719-078-24 DIODE DAC3825 (IR EMITTER) (Note) 58 3-080-204-21 SCREW, TAPPING, P2 D754 8-719-078-24 DIODE DAC3825 (IR EMITTER) (Note) 59 A-7111-982-A SI-041 BOARD, COMPLETE (Note) IC751 6-704-975-01 IC RPM7240-V4 (Note) 60 1-860-929-11 FP-792 FLEXIBLE BOARD J751 1-778-518-11 CONNECTOR, EXTERNAL (S VIDEO OUT) (Note) J752 1-778-040-11 JACK, SMALL TYPE (A/V OUT) (Note) 61 3-087-994-01 CUSHION (51), JACK 62 3-088-031-01 CUSHION (51), MICROPHONE MIC901 1-542-513-11 MICROPHONE

5-3 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1-3. LENS BLOCK

104

105 C D-472

103 102

IC951 (Note)

101

(Note) Be sure to read “Precuations for Replacement of CCD Imager” on page 4-8 when changing the CCD imager.

Ref. No. Part No. Description Ref. No. Part No. Description 101 8-848-765-01 DEVICE, LENS LSV-820A 105 3-080-204-21 SCREW, TAPPING, P2 102 1-758-554-11 FILTER BLOCK, OPTICAL IC951 A-7013-401-A CCD BLOCK ASSY (CCD IMAGER) 103 3-053-973-01 RUBBER (W), SEAL (TRV460E/TRV461E) (Note) 104 A-7111-980-A CD-472 BOARD, COMPLETE IC951 A-7016-724-A CCD BLOCK ASSY (CCD IMAGER) (TRV360/TRV361/TRV460) (Note)

5-4 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1-4. LCD BLOCK

151

156

LCD901

ND901

152 153

PD-205 154

155

The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié.

Ref. No. Part No. Description Ref. No. Part No. Description 151 X-3954-007-1 CABINET (M) (595) ASSY, P 155 3-078-889-11 SCREW (M1.7) 152 3-087-902-01 FRAME (61), PANEL 156 3-088-536-01 CUSHION (61), LCD 153 A-7111-981-A PD-205 BOARD, COMPLETE LCD901 8-753-052-10 ACX307AKM-1 154 3-080-204-21 SCREW, TAPPING, P2 0ND901 1-518-951-21 TUBE, FLUORESCENT, COLD CATHODE

5-5 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1-5. CABINET R BLOCK

202 212

203 201

211

203 204 205 203

203

206 209 207

208

210 ! : BT001 (BATTERY, LITHIUM SECONDARY) Included in the control switch block (CF-5100).

Ref. No. Part No. Description Ref. No. Part No. Description 201 1-478-416-61 KEY BLOCK, CONTROL (CF-5100) 207 3-078-889-11 SCREW (M1.7) 202 3-080-206-11 SCREW, TAPPING, P2 208 1-478-418-11 KEY BLOCK, CONTROL (PR-5100) 203 3-080-205-21 SCREW, TAPPING, P2 209 X-3953-962-1 HINGE (51) ASSY 204 1-962-648-11 HARNESS (PD-124) 210 X-3954-005-1 CABINET (R) (595) ASSY 205 3-087-826-01 COVER (M) (51), HINGE 211 CAUTION TAPE (CF) (TRV360/TRV460/TRV460E: E/TRV461E) 206 3-087-825-11 COVER (C) (51), HINGE 212 3-091-207-01 SHEET (CF), INSULATING

CAUTION : For the part of 211 : TAPE (CF) (3-090-115-01), cut WOVEN (T0.25), FABRIC NON (3-076-631-01) into the desired length and use it. 5-6 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1-6. EVF BLOCK ns: not supplied

251 253 254

255

252 254

256 ns

LCD902

257 258

Ref. No. Part No. Description Ref. No. Part No. Description 251 X-3953-982-1 CABINET (UPPER) (587) ASSY, EVF 257 3-080-203-31 SCREW (M2), LOCK ACE, P2 252 X-3951-166-1 LENS (M) ASSY, VF 258 1-860-928-11 FP-797 FLEXIBLE BOARD 253 X-3953-966-1 CABINET (LOWER) (515) ASSY, EVF LCD902 1-805-465-61 INDICATOR MODULE LIQUID CRYSTAL 254 3-080-204-21 SCREW, TAPPING, P2 (TRV360/TRV361/TRV460) 255 X-3953-967-1 BASE (51) ASSY, SLDE LCD902 1-805-465-81 INDICATOR MODULE LIQUID CRYSTAL (TRV460E/TRV461E) 256 3-087-788-01 BASE (51), SLIDE

5-7 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1-7. BATTERY PANEL BLOCK ns: not supplied

303 304

BT901 301 305

ns 302 302 302 302

306

307

Ref. No. Part No. Description Ref. No. Part No. Description 301 3-087-799-01 SHEET METAL (LOWER) (51), STRAP 305 1-816-271-21 MEMORY STICK CONNECTOR 10P 302 3-078-889-11 SCREW (M1.7) 306 1-860-931-11 FP-799 FLEXIBLE BOARD 303 X-3954-006-1 PANEL (595) ASSY, BATTERY 307 3-088-741-01 SHEET (61), SHIELD 304 3-072-305-01 LID (2500), JACK BT901 1-694-772-11 TERMINAL BOARD, BATTERY

5-8 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1-8. MD FRAME BLOCK 365 ns: not supplied 366

351

352 ns 367 364

ns 363 353 ns 362

354 365 Mechanism deck block (See page 5-10 to 5-13.) ns

355 355 355

356

355 361 355 VC-345 357

359 358 360

Ref. No. Part No. Description Ref. No. Part No. Description 351 1-478-417-41 KEY BLOCK, CONTROL (SS-5100) 361 3-089-368-01 LABEL, FUSE REPLACEMENT (51) 352 3-080-253-01 SCREW (M1.7), LOCK ACE, P2 (TRV360/TRV460) 353 X-3953-958-2 FRAME (51) ASSY, CS 362 X-3953-957-1 CABINET (L) (51) ASSY 354 3-080-204-21 SCREW, TAPPING, P2 363 3-978-765-01 SLIDER, G LOCK 355 3-078-889-11 SCREW (M1.7) 364 3-087-802-01 BELT (51), GRIP 365 3-080-203-31 SREW (M2), LOCK ACE, P2 356 3-066-169-01 SHEET (30), MD 357 3-087-809-01 FRAME (51), MD 366 3-087-833-51 LABEL (L) (56) (TRV360) 358 1-860-927-11 FP-796 FLEXIBLE BOARD 366 3-087-833-61 LABEL (L) (56) (TRV361) 359 A-7112-399-A VC-345 BOARD, COMPLETE (SERVICE) 366 3-088-539-01 LABEL (L) (61) (TRV460) (TRV360/TRV361) 366 3-088-539-11 LABEL (L) (61) (TRV460E) 359 A-7112-400-A VC-345 BOARD, COMPLETE (SERVICE) 366 3-088-539-31 LABEL (L) (61) (TRV461E) (TRV460/TRV460E/TRV461E) 367 3-080-204-11 SCREW, TAPPING, P2 360 1-827-980-11 CABLE, FLEXIBLE FLAT (FFC-005)

5-9 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1-9. CASSETTE COMPARTMENT ASSEMBLY, DRUM ASSEMBLY ns: not supplied 701 702 701

703 705

704 706 707 708 LS chassis block M901 assembly (See page 5-11.) 709

712

711

Mechanical chassis block assembly (See page 5-12 to 5-13.) 710

Ref. No. Part No. Description Ref. No. Part No. Description 701 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 708 3-065-935-01 HLC CUT 1.8X4X0.5 702 3-065-895-01 LEVER, REEL RELEASE 709 3-947-503-01 SCREW (M1.4) 703 3-065-896-01 PLATE, BLIND 710 X-3951-299-1 SCREW ASSY, DRUM FITTING 704 X-3951-298-1 CASSETTE COMPARTMENT ASSY 711 3-074-309-01 ROLLER A, LS GUIDE 705 X-3951-302-1 DAMPER ASSY 712 7-624-101-04 STOP RING 1.2 (E TYPE)

706 X-3951-297-1 GEAR ASSY, R DRIVE M901 A-7048-986-A DRUM (DKH-04B-R) (SERVICE) 707 3-065-840-01 CUT (0.98X3X0.13), LUMILER (W)

5-10 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1-10. LS CHASSIS BLOCK ASSEMBLY 767 759 S001 ns: not supplied 760 764

757 758 766 768 763 765 769

762 761 770 756 771

755 772 781 775 752 778 780 S002 Q001 776 H001 779 774

FP-802 H002 ns 773 Q002 777 FP-301 ns D001

FP-300 FP-302 ns ns

754 753

752

783 751 Ref. No. Part No. Description Ref. No. Part No. Description 751 3-065-822-02 RAIL (S), GUIDE 771 3-065-830-01 SPRING, S RATCHET 752 3-947-503-01 SCREW (M1.4) 772 X-3951-288-1 TABLE (T) ASSY, REEL 753 A-7096-416-B BASE (S) BLOCK ASSY, GUIDE 773 3-065-819-01 SPRING, TG1 ARM 754 A-7096-415-A BASE (T) BLOCK ASSY, GUIDE 774 3-065-821-01 RAIL (T), GUIDE 755 A-7096-426-A CHASSIS ASSY, LS 775 X-3951-289-1 TABLE (S) ASSY, REEL

756 3-065-802-01 SPRING, TG7 ARM 776 3-065-833-01 GUIDE, LOCK 757 A-7096-414-A ARM BLOCK ASSY, TG7 777 3-065-831-01 PLATE (SPR), RE RETURN 758 3-065-801-01 RETAINER, TG7 778 X-3951-304-1 ARM ASSY, TG1 759 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 779 3-065-835-01 GUIDE (S), CASSETTE 760 X-3951-303-1 ARM ASSY, PINCH 780 3-065-820-01 SPRING, RVS ARM

761 3-065-823-01 ARM, T RATCHET 781 X-3951-296-1 BAND (ASSY), BT 762 3-065-794-01 ROAD (SPR), PINCH ARM 783 3-067-167-01 SCREW (M1.4X2), CAMERA TAPPING 763 3-065-792-01 ROLLER, P LIM ARM D001 8-719-988-42 DIODE GL453 (TAPE LED) 764 3-065-834-01 GUIDE (T), CASSETTE H001 8-719-033-37 ELEMENT, HALL HW-105C (T REEL) 765 3-065-824-01 SPRING, T RATCHET H002 8-719-033-37 ELEMENT, HALL HW-105C (S REEL)

766 A-7096-417-A SOFT ASSY, T Q001 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE TOP) 767 3-071-650-01 SCREW (M1.7) (S) Q002 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE END) 768 3-065-832-01 PLATE, LS CAM S001 1-692-614-11 SWITCH, PUSH (3 KEY) (REC PROOF) 769 3-065-828-01 ARM, S RATCHET S002 1-572-688-11 SWITCH, PUSH LEVER (1 KEY) (C. C. LOCK) 770 3-065-829-01 PLATE, S RATCHET (RE)

5-11 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1-11. MECHANICAL CHASSIS BLOCK ASSEMBLY-1 ns: not supplied

816 815 811 819 805 824 ns 815 805 817 810 809 814 802

807 813 M902 812 815 802

821 M903 820 822 806 823

802 808 818 804

803 Mechanical chassis block assembly-2 (See page 5-13.)

801

Ref. No. Part No. Description Ref. No. Part No. Description 801 A-7096-422-A BASE ASSY, DRUM 814 3-065-881-01 SPRING, P PRESSURE PLATE 802 3-947-503-01 SCREW (M1.4) 815 3-065-934-01 HLW CUT 0.98X3X0.25 803 3-065-928-01 SPACER, GROUND 816 1-786-096-11 SWITCH, ROTARY 804 3-065-927-01 GROUND, DRUM 817 3-065-898-01 SPRING, EJECT ARM 805 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 818 3-065-870-01 ROLLER, LS GUIDE

806 3-067-154-01 SPRING, CAPSTAN 819 A-7096-421-A ARM ASSY, HCL 807 3-065-931-01 RAIL (T2), GUIDE 820 3-065-918-01 GEAR (2), CAM RELAY 808 X-3947-398-1 SCREW ASSY, M1.7 PW 821 A-7096-419-A GEAR ASSY, CHANGE 809 3-065-933-01 PAN (2 MAIN 1.4X4.5), CAMERA 822 3-065-902-01 BELT, TIMING 810 1-677-049-11 FP-228 FLEXIBLE BOARD 823 3-065-905-01 GEAR, RELAY

811 1-680-434-11 FP-299 FLEXIBLE BOARD 824 3-065-882-01 ARM, EJECT 812 3-065-877-01 PLATE (T), GUIDE LOCK M902 8-835-701-01 MOTOR, DC SCE13A/C-NP (CAPSTAN) 813 X-3951-301-1 PLATE ASSY, PINCH PRESSURE M903 A-7096-420-A MOTOR ASSY, LD (LOADING)

5-12 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E

5. REPAIR PARTS LIST

5-1-12. MECHANICAL CHASSIS BLOCK ASSEMBLY-2

860 863

861 859 862 857 864 858

865

856

855 853 866 854 852 851 867

868

Ref. No. Part No. Description Ref. No. Part No. Description 851 3-065-920-01 ARM, HC DRIVE 860 7-624-101-04 STOP RING 1.2 (E TYPE) 852 3-065-913-01 GEAR (4), LD 861 A-7096-412-A GEAR (T) ASSY, GUIDE 853 3-065-914-01 SHEET, COVER 862 X-3951-307-1 PLATE ASSY, M SLIDE 854 3-065-917-01 GEAR (1), CAM RELAY 863 X-3951-305-1 ARM ASSY, LS 855 3-065-934-01 HLW CUT 0.98X3X0.25 864 3-065-901-01 ROLLER, LS ARM

856 3-065-915-01 GEAR (1), CAM 865 3-065-916-01 GEAR (2), CAM 857 3-065-878-01 PLATE (S), GUIDE LOCK 866 3-065-919-01 ARM, T1 LIMITTER 858 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 867 X-3951-308-1 ARM ASSY, GL 859 A-7096-413-A GEAR (S) ASSY, GUIDE 868 X-3951-300-2 CHASSIS ASSY, MECHANICAL

5-13 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E CD-472 FP-300 FP-301 FP-302 FP-792 FP-802 PD-205

5-2. ELECTRICAL PARTS LIST Ref. No. Part No. Description Ref. No. Part No. Description A-7111-980-A CD-472 BOARD, COMPLETE D002 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT) ********************** D003 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT) (IC951 is not included in this complete board.)

< CAPACITOR > FP-802 FLEXIBLE BOARD (Not Supplied) ******************** C951 1-126-395-11 ELECT CHIP 22uF 20% 16V C953 1-128-994-21 ELECT CHIP 47uF 20% 10V < HOLE ELEMENT > C955 1-164-360-11 CERAMIC CHIP 0.1uF 16V H001 8-719-033-37 ELEMENT, HALL HW-105C (T REEL) < CONNECTOR > H002 8-719-033-37 ELEMENT, HALL HW-105C (S REEL)

CN951 1-815-762-11 CONNECTOR, FFC/FPC 14P < SWITCH >

< IC > S001 1-692-614-11 SWITCH, PUSH (3 KEY) (REC PROOF) S002 1-572-688-11 SWITCH, PUSH LEVER (1 KEY) (C.C. LOCK) IC951 A-7013-401-A CCD BLOCK ASSY (CCD IMAGER) (Note) (TRV460E/TRV461E) IC951 A-7016-724-A CCD BLOCK ASSY (CCD IMAGER) (Note) A-7111-981-A PD-205 BOARD, COMPLETE (TRV360/TRV361/TRV460) **********************

< COIL > < CAPACITOR >

L951 1-469-528-91 INDUCTOR 100uH C6001 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C6002 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V < TRANSISTOR > C6003 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C6004 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V Q951 8-729-117-73 TRANSISTOR 2SC4178-F14 C6005 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

< RESISTOR > C6006 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C6007 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V R952 1-218-940-11 RES-CHIP 82 5% 1/16W C6009 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V R953 1-218-959-11 RES-CHIP 3.3K 5% 1/16W C6010 1-164-739-11 CERAMIC CHIP 560PF 5% 50V R970 1-216-864-11 SHORT CHIP 0 C6011 1-164-657-11 CERAMIC CHIP 0.015uF 1% 50V

C6012 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V FP-300 FLEXIBLE BOARD (Not Supplied) C6013 1-100-371-11 CERAMIC CHIP 12PF 5% 3.15KV ******************** C6014 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V C6015 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V < PHOTO TRANSISTOR > C6017 1-165-908-11 CERAMIC CHIP 1uF 10% 10V

Q001 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE TOP) C6018 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C6019 1-104-847-11 TANTALUM CHIP 22uF 20% 4V C6020 1-100-502-11 TANTALUM CHIP 3.3uF 20% 25V FP-301 FLEXIBLE BOARD (Not Supplied) C6028 1-162-966-11 CERAMIC CHIP 0.0022uF 1% 50V ******************** C6029 1-100-252-11 CERAMIC CHIP 0.1uF 10% 6.3V

< DIODE > < CONNECTOR >

D001 8-719-988-42 DIODE GL453S (TAPE LED) CN6001 1-794-997-11 PIN, CONNECTOR 20P CN6003 1-764-709-11 FFC/CONNECTOR, FPC (LIF) 10P CN6004 1-815-031-11 CONNECTOR, FFC/FPC (ZIF) 24P FP-302 FLEXIBLE BOARD (Not Supplied) CN6005 1-816-176-11 FFC/CONNECTOR, FPC (ZIF) 6P ******************** CN6007 1-816-176-11 FFC/CONNECTOR, FPC (ZIF) 6P

< PHOTO TRANSISTOR > < DIODE >

Q002 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE END) D6001 8-719-050-42 DIODE RD3.3UM-T1B D6004 8-719-073-01 DIODE MA111-(K8).S0

1-860-929-11 FP-792 FLEXIBLE BOARD < IC > ******************** (D001, D002 and D003 are not included in this flexible board.) IC6001 8-752-115-66 IC CXA3622BR-T4 IC6002 6-704-149-01 IC TK11128CSCL-G < DIODE >

D001 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)

Note: Be sure to read “Precautions for Replacement of CCD Imager” on page 4-8 when changing the CCD imager. 5-14 DCR-TRV360/TRV361/TRV460/TRV460E/TRV461E PD-205 SI-041

Ref. No. Part No. Description Ref. No. Part No. Description < COIL > < FERRITE BEAD >

L6001 1-469-527-91 INDUCTOR 47uH FB751 1-414-760-21 INDUCTOR, FERRITE BEAD L6002 1-412-056-11 INDUCTOR 4.7uH L6003 1-428-878-11 INDUCTOR 82uH < IC >

< TRANSISTOR > IC751 6-704-975-01 IC RPM7240-V4

Q6003 6-550-083-01 TRANSISTOR TPC6C01 (TE85R) < JACK > Q6004 8-729-054-48 TRANSISTOR UP04601008S0 Q6005 8-729-054-48 TRANSISTOR UP04601008S0 J751 1-778-518-11 CONNECTOR, EXTERNAL (S VIDEO) Q6006 8-729-041-23 TRANSISTOR NDS356AP J752 1-778-040-11 JACK, SMALL TYPE (A/V) Q6008 8-729-054-89 TRANSISTOR UP04211008S0 < TRANSISTOR > Q6009 8-729-054-44 TRANSISTOR UP04111008S0 Q751 8-729-023-22 TRANSISTOR 2SD2114K < RESISTOR > < RESISTOR > R6005 1-216-824-11 METAL CHIP 1.8K 5% 1/10W R6009 1-218-975-11 RES-CHIP 68K 5% 1/16W R752 1-216-806-11 METAL CHIP 56 5% 1/10W R6010 1-218-969-11 RES-CHIP 22K 5% 1/16W R753 1-216-806-11 METAL CHIP 56 5% 1/10W R6012 1-208-707-11 METAL CHIP 10K 0.5% 1/16W R756 1-216-864-11 SHORT CHIP 0 R6013 1-208-935-11 METAL CHIP 100K 0.5% 1/16W R757 1-216-864-11 SHORT CHIP 0 R763 1-216-821-11 METAL CHIP 1K 5% 1/10W R6014 1-218-949-11 RES-CHIP 470 5% 1/16W R6019 1-218-965-11 RES-CHIP 10K 5% 1/16W R764 1-216-833-11 METAL CHIP 10K 5% 1/10W R6021 1-218-977-11 RES-CHIP 100K 5% 1/16W R765 1-216-833-11 METAL CHIP 10K 5% 1/10W R6022 1-218-965-11 RES-CHIP 10K 5% 1/16W R6023 1-216-847-11 METAL CHIP 150K 5% 1/10W < SENSOR >

R6030 1-218-949-11 RES-CHIP 470 5% 1/16W SE751 1-476-807-41 SENSOR, ANGULAR VELOCITY (YAW) SE752 1-476-807-31 SENSOR, ANGULAR VELOCITY (PITCH) < COMPOSITION CIRCUIT BLOCK >

RB6001 1-234-369-21 RES, NETWORK 10 x 4 (1005)

< TRANSFORMER > Electrical parts list of the VC-345 board is not shown. 0T6001 1-435-786-31 TRANSFORMER, INVERTER Pages 5-16 to 5-24 are not shown.

A-7111-982-A SI-041 BOARD, COMPLETE ********************** (CN751, CN752, D753, D754, IC751, J751 and J752 are not included in this complete board.)

< CAPACITOR >

C758 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V C759 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V

< CONNECTOR >

CN751 1-794-276-11 CONNECTOR, SQUARE TYPE 4P (DV) CN752 1-794-962-11 CONNECTOR, SQUARE TYPE (USB 5P) (USB) CN753 1-816-232-11 PIN, CONNECTOR (PC BOARD) 4P CN754 1-818-074-11 CONNECTOR, FFC/FPC (ZIF) 36P

< DIODE >

D751 6-500-044-01 DIODE DF6A6.8FU (TE85R) D752 6-500-044-01 DIODE DF6A6.8FU (TE85R) D753 8-719-078-24 DIODE DAC3825 (IR EMITTER) D754 8-719-078-24 DIODE DAC3825 (IR EMITTER) D755 8-719-421-27 DIODE MA728

D756 6-500-044-01 DIODE DF6A6.8FU (TE85R) D759 6-500-506-01 DIODE TLRMV1021 (T15SOY, F) (TALLY)

Checking supplied accessories.

USB cable (1) A/V connecting cable (1) 1-823-931-21 1-824-097-41

AC-L15A/L15B AC Adaptor (1) Other accessories 0 1-477-533-32 (TRV461E) Battery holder CAMERA OPERATIONS GUIDE 0 1-477-533-51 3-083-973-01 3-087-921-11 MANUAL, INSTRUCTION (ENGLISH) (EXCEPT TRV461E) (TRV360/TRV361/TRV460) Wireless Remote Commander RMT-831 (1) 3-087-921-21 MANUAL, INSTRUCTION (FRENCH) (TRV460: CND) 1-477-898-41 3-087-921-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (EXCEPT TRV461E) (TRV361/TRV460: E) 1-477-898-61 (TRV461E) 3-087-921-41 MANUAL, INSTRUCTION (TRADITIONAL CHINESE) (TRV460: E) 3-087-923-11 MANUAL, INSTRUCTION (ENGLISH) Shoulder strap (1) (TRV460E: AEP, UK, E, AUS/TRV461E) 3-987-015-01 3-087-923-21 MANUAL, INSTRUCTION (FRENCH) (TRV460E: AEP, E) Lens cap (1) 3-087-923-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) X-3952-971-1 (TRV460E: AEP) 3-087-923-41 MANUAL, INSTRUCTION (ITALIAN, GREEK) (TRV460E: AEP) 3-087-923-51 MANUAL, INSTRUCTION (GERMAN, DUTCH) (TRV460E: AEP) 3-087-923-61 MANUAL, INSTRUCTION (SWEDISH, RUSSIAN) Cap string (1) (TRV460E: NE) 3-979-194-12 3-087-923-71 MANUAL, INSTRUCTION (DANISH, FINNISH) Rechargeable battery pack (TRV460E: NE) NP-FM30 (1) 3-087-923-81 MANUAL, INSTRUCTION (POLISH, CZECH) (TRV460E: EE) 0 A-7096-387-A (US, CND) 3-087-923-91 MANUAL, INSTRUCTION (HUNGALIAN, SLOVAKIAN) 0 A-7096-388-B (TRV460E: EE) (EXCEPT US, CND) 3-087-924-11 MANUAL, INSTRUCTION (ARABIC, PERSIAN) (TRV460E: E/TRV461E) 3-087-924-31 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE) (TRV460E: E) COMPUTER APPLICATIONS GUIDE Memory Stick 8MB (1) 3-087-936-11 MANUAL (PC), INSTRUCTION (ENGLISH) (EXCEPT TRV460E: AEP, NE, EE) 3-087-936-21 MANUAL (PC), INSTRUCTION (FRENCH) (TRV460: CND/TRV460E: AEP, E) 21-pin adaptor (1) 3-087-936-31 MANUAL (PC), INSTRUCTION (GERMAN, DUTCH) 1-770-783-21 (AEP, UK, NE, EE) (TRV460E: AEP) 3-087-936-41 MANUAL (PC), INSTRUCTION (SPANISH, PORTUGUESE) (TRV361/TRV460: E/TRV460E: AEP) 3-087-936-51 MANUAL (PC), INSTRUCTION (ITALIAN, GREEK) (TRV460E: AEP) 3-087-936-61 MANUAL (PC), INSTRUCTION (SWEDISH, RUSSIAN) CD-ROM (TRV460E: NE) (SPVD-012 (V) USB Driver) (1) 3-087-936-71 MANUAL (PC), INSTRUCTION (DANISH, FINNISH) Conversion 2P adaptor (1) 3-086-790-01 (US, CND) (TRV460E: NE) 0 1-569-008-12 (SPVD-012 USB Driver) (1) 3-087-936-81 MANUAL (PC), INSTRUCTION (POLISH, CZECH) (TRV361: E, TRV460: E, 3-087-821-01 (TRV460E: EE) TRV461: E) (EXCEPT US, CND) 3-087-936-91 MANUAL (PC), INSTRUCTION (HUNGALIAN, SLOVAKIAN) (TRV460E: EE) 3-087-937-11 MANUAL (PC), INSTRUCTION (ARABIC, PERSIAN) (TRV460E: E/TRV461E) 3-087-937-21 MANUAL (PC), INSTRUCTION (TRADITIONAL CHINESE) (TRV460: E) Power cord (1) 3-087-937-31 MANUAL (PC), INSTRUCTION (SIMPLIFIED CHINESE) 0 1-696-819-21 (AUS) (TRV460E: E) 0 1-769-608-11 (AEP, NE, EE, E) 0 1-783-374-11 (UK) 0 1-790-542-12 (US, CND)

Toolbar

Printing a text Reversing the screens displayed once 1. Click the Print button . ¥To reverse the previous screens (operation) one by one, click 2. Specify a printer, print range, number of copies, and other op- the . tions, and then click [OK]. ¥To advance the reversed screens (operation) one by one, click the . Application of printing: To set a range to be printed within a page, select the graphic Application to the Service Manual: selection tool and drag on the page to enclose a range to This function allows you to go and back between circuit dia- be printed, and then click the Print button. gram and printed circuit board diagram, and accordingly it will be convenient for the voltage check.

Finding a text 1. Click the Find button . Moving with link 2. Enter a character string to be found into a text box, and click the [Find]. (Specify the find options as necessary) 1. Select either palm tool , zoom tool , text selection tool , or graphic selection tool . Application to the Service Manual: 2. Place the pointer in the position in a text where the link exists To execute “find” from current page toward the previous pages, (such as a button on cover and the table of contents page, or select the check box “Find Backward” and then click the blue characters on the removal flowchart page or drawing “Find”. page), and the pointer will change to the forefinger form . 3. Then, click the link. (You will go to the link destination.)

Moving with bookmark: Click an item (text) on the bookmark pallet, and you can move to the link destination. Also, clicking can display the hidden items. (To go back to original state, click ) 3. Open the find dialog box again, and click the [Find Again] and you can find the matched character strings displayed next. (Character strings entered previously are displayed as they are in the text box.)

Application to the Service Manual: The parts on the drawing pages (block diagrams, circuit diagrams, printed circuit boards) and parts list pages in a text can be found using this find function. For example, find a Ref. No. of IC on the block diagram, and click the [Find Again] continuously, so that you can move to the Ref. No. of IC on Zooming or rotating the screen display the circuit diagram or printed circuit board diagram succes- “Zoom in/out” sively. ¥ Click the triangle button in the zoom control box to select the Note: The find function may not be applied to the Service display magnification. Or, you may click or for zoom- Manual depending on the date of issue. ing in or out.

Switching a page ¥To move to the first page, click the . ¥To move to the last page, click the . “Rotate” ¥To move to the previous page, click the . ¥ Click rotate tool , and the page then rotates 90 degrees each. ¥To move to the next page, click the . Application to the Service Manual: The printed circuit board diagram you see now can be changed to the same direction as the set. Reverse 987629331.pdf Revision History

S.M. Rev. Ver. Date History Contents issued 1.0 2003.12 Official Release — —