DCR-TRV380/TRV480/TRV480E RMT-831

SERVICE MANUAL LEVEL 2 DCR-TRV480 Ver 1.0 2004.11 US Model Canadian Model Revision History DCR-TRV480E AEP Model UK Model How to use North European Model Acrobat Reader Australian Model DCR-TRV380/ TRV480/ TRV480E E Model

M2000 MECHANISM Photo: DCR-TRV480E

Link

SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS

SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REPAIR PARTS LIST

DISASSEMBLY SCHEMATIC DIAGRAMS

¥For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (9-876-781-51). ¥For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL1 (9-876-781-41). ¥For MECHANISM ADJUSTMENTS, refer to the “8mm Video MECHANICAL ADJUSTMENT MANUAL IX M2000 MECHANISM ” (9-929-861-11). ¥ Reference No. search on printed wiring boards is available. ¥Table for differences of function of each model. ¥TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT) ¥ HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.

On the VC-345 board This service manual provides the information that is premised The following pages are not shown. the circuit board replacement service and not intended repair Schematic diagrams ...... Pages 4-9 to 4-44 inside the VC-345 board. Printed wiring boards ...... Pages 4-59 to 4-62 Therefore, schematic diagrams, printed wiring boards, mounted Waveforms ...... Pages 4-70 to 4-75 parts location and electrical parts list of the VC-345 board are Mounted parts location ...... Pages 4-77 and 4-78 not shown. Electrical parts list ...... Pages 5-16 to 5-24 DIGITAL VIDEO CAMERA RECORDER

2004K0500-1 DCR-TRV380/TRV480/TRV480E ©2004.11 9-876-781-31 Sony EMCS Co. Published by DI Technical Support Section TM SERIES

SPECIFICATIONS

Lens Mass (Approx.) Video camera recorder Combined power zoom lens 800 g (1 lb 12 oz) main unit only Filter diameter: 37 mm (1 7/16 in.) 940 g (2 lb 1 oz) including the NP-FM30 20 × (Optical), 990 × (Digital) rechargeable battery pack, Hi8/Digital8 F = 1.6 ~ 2.4 cassette, lens cap, and shoulder strap. System Focal length Supplied accessories 2.5 - 50 mm (1/8 - 2 in.) AC Adaptor (1) Video recording system When converted to a 35 mm still camera Power cord (1) 2 rotary heads, Helical scanning system In CAMERA-TAPE: Lens cap (1) Still image recording system 42 - 840 mm (1 11/16 - 33 1/8 in.) Shoulder strap (1) Exif Ver. 2.2*1 In CAMERA-MEMORY: Wireless Remote commander RMT-831 (1) *1 “Exif” is a file format for still images, 42 - 840 mm (1 11/16 - 33 1/8 in.) A/V connecting cable (1) established by the JEITA (Japan Color temperature USB cable (1) Electronics and Information Technology Auto Rechargeable battery pack NP-FM30 (1) Industries Association). Files in this format Minimum illumination CD-ROM “Picture Package Ver.1.5” (1) can have additional information such as 4 lx (lux) (F 1.6) Camera Operations Guide (1) your camcorder’s setting information at the 0 lx (lux) (during the NightShot plus See page 5-25. time of recording. function)*2 Audio recording system *2 Objects unable to be seen due to the dark can Rotary heads, PCM system AC Adaptor AC-L15A/L15B be shot with infrared lighting. Quantization: 12 bits (Fs 32 kHz, stereo 1, Power requirements stereo 2), 16 bits (Fs 48 kHz, stereo) Input/Output connectors AC 100 - 240 V, 50/60 Hz Video signal Current consumption Audio/Video input/output DCR-TRV380/TRV480: 0.35 - 0.18 A AV MINIJACK NTSC color, EIA standards Power consumption Video signal: 1 Vp-p, 75 Ω (ohms), DCR-TRV480E: 18 W unbalanced, sync negative PAL color, CCIR standards Output voltage Audio signal: 327 mV (at output impedance Usable cassette DC 8.4 V, 1.5 A more than 47 kΩ (kilohms)), Input impedance 8 mm video format cassette Operating temperature more than 47 kΩ (kilohms), Output impedance Tape speed 0° C to 40° C (32° F to 104° F) with less than 2.2 kΩ (kilohms) DCR-TRV380/TRV480: Storage temperature Stereo minijack (φ 3.5mm) -20° C to + 60° C (-4° F to + 140° F) SP: Approx. 28.67 mm/s DV input/output Dimensions (approx.) LP: Approx. 19.11 mm/s 4-pin connector 56 × 31 × 100 mm (2 1/4 × 1 1/4 × 4 in.) (w/h/ DCR-TRV480E: USB jack d) excluding the projecting parts SP: Approx. 28.70 mm/s mini-B LP: Approx. 19.13 mm/s Mass (approx.) Recording/play back time LCD screen 190 g (6.7 oz) excluding the power cord DCR-TRV380/TRV480: Picture (using 120 min. Hi8/Digital8 video cassette) 6.2 cm (2.5 type) Rechargeable battery pack (NP-FM30) DCR-TRV480E: Total dot number Maximum output voltage (using 90 min. Hi8/Digital8 video cassette) 123 200 (560 × 220) DC 8.4 V SP: 60 min Output voltage LP: 90 min General DC 7.2 V Fast forward/rewind time Power requirements Capacity DCR-TRV380/TRV480: DC 7.2 V (battery pack) 5.0 Wh (700 mAh) (using 120 min. Hi8/Digital8 video cassette) DC 8.4 V (AC Adaptor) Dimensions (approx.) DCR-TRV480E: Average power consumption (when using the 38.2 × 20.5 × 55.6 mm (using 90 min. Hi8/Digital8 video cassette) battery pack) (1 9/16 × 1 3/16 × 2 1/4 in.) (w/h/d) Approx. 5 min During camera recording using the viewfinder Mass (approx.) Viewfinder 2.9 W 65 g (2.3 oz) Electric viewfinder (monochrome) During camera recording using the LCD Operating temperature Image device 3.8 W 0° C to 40° C (32° F to 104° F) 3.0 mm (1/6 type) CCD (Charge Coupled Operating temperature Type Device) 0° C to 40° C (32° F to 104° F) Lithium ion DCR-TRV380/TRV480: Storage temperature Design and specifications are subject to change Gross: Approx. 460 000 pixels ° ° ° ° -20 C to + 60 C (-4 F to + 140 F) without notice. Effective (still): Approx. 290 000 pixels Dimensions (approx.) Effective (movie): Approx. 290 000 pixels 85 × 98 × 151 mm (3 3/8 × 3 7/8 × 6 in.) DCR-TRV480E: (w/h/d) Gross: Approx. 540 000 pixels Effective (still): Approx. 350 000 pixels Effective (movie): Approx. 350 000 pixels

DCR-TRV380/TRV480/TRV480E — 2 — Table for differences of function Model DCR-TRV380 DCR-TRV480 DCR-TRV480E Destination E US, CND, E AEP, UK, NE, E, AUS Color system NTSC NTSC PAL Playback system Digital8 Hi8/8/Digital8 Hi8/8/Digital8 ¥Abbreviation AUS: Australian model CND : Canadian model NE : North European model

CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIéCES SONT LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIéSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer.

1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder connections. Check the entire board surface for solder splashes Boards requiring use of unleaded solder are printed with the lead- and bridges. free mark (LF) indicating the solder contains no lead. 2. Check the interboard wiring to ensure that no wires are (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) "pinched" or contact high-wattage resistors. 3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point : LEAD FREE MARK them out to the customer and recommend their replacement. Unleaded solder has the following characteristics. 4. Look for parts which, through functioning, show obvious signs • Unleaded solder melts at a temperature about 40°C higher than of deterioration. Point them out to the customer and ordinary solder. recommend their replacement. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. 5. Check the B+ voltage to see it is at the values specified. Soldering irons using a temperature regulator should be set to 6. FLEXIBLE Circuit Board Repairing about 350°C. ° ¥Keep the temperature of the soldering iron around 270 C Caution: The printed pattern (copper foil) may peel away if the during repairing. heated tip is applied for too long, so be careful! ¥ Do not touch the soldering iron on the same conductor of the • Strong viscosity circuit board (within 3 times). Unleaded solder is more viscous (sticky, less prone to flow) than ¥ Be careful not to apply force on the conductor when soldering ordinary solder so use caution not to let solder bridges occur such or unsoldering. as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. DCR-TRV380/TRV480/TRV480E — 3 — TABLE OF CONTENTS Section Title Page Section Title Page 1. SERVICE NOTE 1-1. Note for Repair áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá1-1 5. REPAIR PARTS LIST 1-2. Power Supply During Repairs ááááááááááááááááááááááááááááááááááááááááá1-1 5-1. Exploded Views áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-2 1-3. To Take Out a Cassette when not Eject (Force Eject) ááááá1-2 5-1-1. Overall Assembly áááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-2 1-4. Self-diagnosis Function ááááááááááááááááááááááááááááááááááááááááááááááááááá1-3 5-1-2. Front Panel Block ááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-3 1-4-1.Self-diagnosis Function ááááááááááááááááááááááááááááááááááááááááááááááááááá1-3 5-1-3. Lens Block áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-4 1-4-2.Self-diagnosis Display ááááááááááááááááááááááááááááááááááááááááááááááááááááá1-3 5-1-4. LCD Block áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-5 1-4-3.Self-diagnosis Code Table ááááááááááááááááááááááááááááááááááááááááááááááá1-4 5-1-5. Cabinet R Block áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-6 5-1-6. EVF Block áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-7 5-1-7. Battery Panel Block áááááááááááááááááááááááááááááááááááááááááááááááááááááá5-8 2. DISASSEMBLY 5-1-8. MD Frame Block áááááááááááááááááááááááááááááááááááááááááááááááááááááááááá5-9 2-1. Flow Chart ááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá2-1 5-1-9. Cassette Compartment Assembly, Drum Assembly ááá5-10 2-2. Mechanism Deck Service Position áááááááááááááááááááááááááááááááááá2-3 5-1-10. LS Chassis Block Assembly ááááááááááááááááááááááááááááááááááááááá5-11 2-3. LCD Service Position áááááááááááááááááááááááááááááááááááááááááááááááááááááá2-5 5-1-11. Mechanical Chassis Block Assembly-1 áááááááááááááááááááááá5-12 2-4. Circuit Boards Location áááááááááááááááááááááááááááááááááááááááááááááááááá2-6 5-1-12. Mechanical Chassis Block Assembly-2 áááááááááááááááááááááá5-13 2-5. Flexible Boards Location áááááááááááááááááááááááááááááááááááááááááááááááá2-6 5-2. Electrical Parts List ááááááááááááááááááááááááááááááááááááááááááááááááááááá5-14

3. BLOCK DIAGRAMS 3-1. Overall Block Diagram (1/6) ááááááááááááááááááááááááááááááááááááááááááá3-1 3-2. Overall Block Diagram (2/6) ááááááááááááááááááááááááááááááááááááááááááá3-3 3-3. Overall Block Diagram (3/6) ááááááááááááááááááááááááááááááááááááááááááá3-5 3-4. Overall Block Diagram (4/6) ááááááááááááááááááááááááááááááááááááááááááá3-7 3-5. Overall Block Diagram (5/6) ááááááááááááááááááááááááááááááááááááááááááá3-9 3-6. Overall Block Diagram (6/6) ááááááááááááááááááááááááááááááááááááááááá3-11 3-7. Power Block Diagram (1/3)ááááááááááááááááááááááááááááááááááááááááááá3-13 3-8. Power Block Diagram (2/3)ááááááááááááááááááááááááááááááááááááááááááá3-15 3-9. Power Block Diagram (3/3)ááááááááááááááááááááááááááááááááááááááááááá3-17

4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. Frame Schematic Diagram áááááááááááááááááááááááááááááááááááááááááááááá4-1 4-2. Schematic Diagrams áááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-5 CD-472 (CCD IMAGER)áááááááááááááááááááááááááááááááááááááááááááááááá4-7 PD-205 (LCD DRIVER, BACKLIGHT DRIVE) ááááááááá4-45 SI-041 (STEADYSHOT, JACK) ááááááááááááááááááááááááááááááááááá4-47 FP-792 FLEXIBLE ááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-47 FP-228, FP-299, FP-300, FP-301, FP-302, FP-802 FLEXIBLE áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-49 CONTROL KEY BLOCK (SS-5100, PR-5100, SB-9000) áááááááááááááááááááááááááááááááááááááá4-50 CONTROL KEY BLOCK (CF-5100)ááááááááááááááááááááááááááá4-51 4-3. Printed Wiring Boards ááááááááááááááááááááááááááááááááááááááááááááááááááá4-55 CD-472 áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-57 PD-205ááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-63 SI-041, FP-792 FLEXIBLE áááááááááááááááááááááááááááááááááááááááááá4-65 FP-228, FP-299, FP-300, FP-301, FP-302, FP-802 FLEXIBLE áááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-67 4-4. Waveforms ááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááááá4-69 4-5. Mounted Parts Location áááááááááááááááááááááááááááááááááááááááááááááááá4-79

DCR-TRV380/TRV480/TRV480E — 4 — 1. SERVICE NOTE 1-1. NOTE FOR REPAIR

Make sure that the flat cable and flexible board are not cracked of When remove a connector, don’t pull at wire of connector. bent at the terminal. It is possible that a wire is snapped. Do not insert the cable insufficiently nor crookedly.

When installing a connector, don’t press down at wire of connector. It is possible that a wire is snapped.

Cut and remove the part of gilt which comes off at the point. (Be careful or some pieces of gilt may be left inside)

1-2. POWER SUPPLY DURING REPAIRS

In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so that the unit cannot operate. The following method is available to prevent this.

Method 1. Use the AC power adaptor (AC-L10, AC-VQ800 etc.).

DCR-TRV380/TRV480/TRV480E 1-1 1-3. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)

1 Refer to “SECTION 2 DISASSEMBLY” to remove the mechanism deck block. 2 Disconnect CN2401 (2P) of VC-345 board. 3 Add +5V from the DC POWER SUPPLY and unload with a pressing the cassette compartment.

4 Pull the timing belt in the direction of arrow A with a pincette while pressing the cassette compartment (take care not to damage) to adjust the bending of a tape.

Press the cassette compartment not to rise the cassette compartment

Pincette [DC power supply] A (+5V)

Timing belt

5 Let go your hold the cassette compartment and rise the cassette compartment to take out a cassette. A

Loading motor

Disconnect CN2401 of VC-345 board.

Timing belt Adjust the bending of a tape

DCR-TRV380/TRV480/TRV480E 1-2 1-4. SELF-DIAGNOSIS FUNCTION

1-4-1. Self-diagnosis Function 1-4-2. Self-diagnosis Display When problems occur while the unit is operating, the self-diagnosis When problems occur while the unit is operating, the counter of the function starts working, and displays on the viewfinder or LCD viewfinder or LCD screen shows a 4-digit display consisting of an screen what to do. This function consists of two display; self- alphabet and numbers, which blinks at 3.2 Hz. This 5-character diagnosis display and service mode display. display indicates the “repaired by:”, “block” in which the problem Details of the self-diagnosis functions are provided in the Instruction occurred, and “detailed code” of the problem. manual. Viewfinder or LCD screen

C : 3 1 : 1 1

Blinks at 3.2Hz

C 3 1 1 1

Repaired by: Block Detailed Code C : Corrected by customer Indicates the appropriate Refer to “1-4-3. Self-diagnosis Code Table”. H : Corrected by dealer step to be taken. E : Corrected by service E.g. engineer 31 ....Reload the tape. 32 ....Turn on power again.

DCR-TRV380/TRV480/TRV480E 1-3 1-4-3. Self-diagnosis Code Table

Self-diagnosis Code

Block Detailed Symptom/State Correction Function Code

Repaired by: C 04 00Non-standard battery is used. Use the InfoLITHIUM battery. C 21 00Condensation. Remove the cassette, and insert it again after one hour. C 22 00Video head is dirty. Clean with the optional cleaning cassette. LOAD direction. Loading does not C 31 10 Load the tape again, and perform operations from the beginning. complete within specified time UNLOAD direction. Loading does not C 31 11 Load the tape again, and perform operations from the beginning. complete within specified time C 31 20T reel side tape slacking when unloading. Load the tape again, and perform operations from the beginning. C 31 21S reel side tape slacking when unloading. Load the tape again, and perform operations from the beginning. C 31 22T reel fault. Load the tape again, and perform operations from the beginning. C 31 23S reel fault. Load the tape again, and perform operations from the beginning. C 31 30FG fault when starting capstan. Load the tape again, and perform operations from the beginning. C 31 31FG fault during normal capstan operations. Load the tape again, and perform operations from the beginning. C 31 40FG fault when starting drum. Load the tape again, and perform operations from the beginning. C 31 41PG fault when starting drum. Load the tape again, and perform operations from the beginning. C 31 42FG fault during normal drum operations. Load the tape again, and perform operations from the beginning. C 31 43PG fault during normal drum operations. Load the tape again, and perform operations from the beginning. C 31 44Phase fault during normal drum operations. Load the tape again, and perform operations from the beginning. LOAD direction loading motor time- Remove the battery or power cable, connect, and perform C 32 10 out. operations from the beginning. UNLOAD direction loading motor Remove the battery or power cable, connect, and perform C 32 11 time-out. operations from the beginning. T reel side tape slacking when Remove the battery or power cable, connect, and perform C 32 20 unloading. operations from the beginning. S reel side tape slacking when Remove the battery or power cable, connect, and perform C 32 21 unloading. operations from the beginning. Remove the battery or power cable, connect, and perform C 32 22 T reel fault. operations from the beginning. Remove the battery or power cable, connect, and perform C 32 23 S reel fault. operations from the beginning. Remove the battery or power cable, connect, and perform C 32 30FG fault when starting capstan. operations from the beginning. FG fault during normal capstan Remove the battery or power cable, connect, and perform C 32 31 operations. operations from the beginning. Remove the battery or power cable, connect, and perform C 32 40FG fault when starting drum. operations from the beginning. Remove the battery or power cable, connect, and perform C 32 41PG fault when starting drum. operations from the beginning. FG fault during normal drum Remove the battery or power cable, connect, and perform C 32 42 operations. operations from the beginning. PG fault during normal drum Remove the battery or power cable, connect, and perform C 32 43 operations. operations from the beginning. Phase fault during normal drum Remove the battery or power cable, connect, and perform C 32 44 operations. operations from the beginning.

DCR-TRV380/TRV480/TRV480E 1-4 Self-diagnosis Code

Block Detailed Symptom/State Correction Function Code

Repaired by: Inspect the lens block focus reset sensor (Pin qs of CN1551 of Difficult to adjust focus VC-345 board) when focusing is performed when the control dial E 61 00 (Cannot initialize focus.) is rotated in the focus manual mode and the focus motor drive circuit (IC1554 of VC-345 board) when the focusing is not performed. Inspect the lens block zoom reset sensor (Pin qg of CN1551 of Zoom operations fault VC-345 board) when zooming is performed when the zoom switch E 61 10 (Cannot initialize zoom lens.) is operated and the zoom motor drive circuit (IC1554 of VC- 345board) when zooming is not performed. Steadyshot function does not work well. Inspect pitch angular velocity sensor (SE752 of SI-041 board) E 62 00(With pitch angular velocity sensor output peripheral circuits. stopped.) Steadyshot function does not work well. Inspect yaw angular velocity sensor (SE751 of SI-041 board) E 62 01(With yaw angular velocity sensor output peripheral circuits. stopped.)

DCR-TRV380/TRV480/TRV480E 1-5E 2. DISASSEMBLY HELP 2-1. FLOW CHART

The following flow chart shows the disassembly procedure. Note: When you remove Cabinet (R) Block, or when you assembly, please slide 8 2 1 NS knob to the position of "ON". NS knob 7 1 2 3 2 0 qa 5 1 qf qg 9 6 5 7 6 3 4 9 1 5 qs 4 HELP qd 4 1 qh qj 6 8 3 4 6 1 Tripod Screw 0 Tapping (P2) x2 2 Tapping P2 x2 qa Screw (M1.7) x1 1 Lock ace x3 6 Lock ace x3 1 Lock ace x6 3 Tapping P2 x6 qs P Cabi (M) 2 Cabi (upper) 7 Claw 2 NS knob to the position of "ON". 4 Claw qd PD-205: CN6005 3 Grip belt 8 Front panel 3 Cabi (R) 5 CF-5100 qf PD-205: CN6001 4 Lock ace x3 Note: Flexible board is connected. 4 VC-345: CN1007 6 Tapping (P2) x4 qg PD-205, LCD901, ND901 5 Cabi (L) 9 FP-796: CN754, CN1001 5 VC-345: CN1003 7 Claw x2 qh Tapping P2 x4 6 VC-345: CN1008 8 P Cabi (C) qj Hinge assy 9 PD-205: CN6006

9 4 5 1 8 4 3 5 4 3 7 8 6 1 6 7 2 6 2 3 4 2 1 1 VC-345: CN1013 6 VC-345: CN1009 2 1 5 5 Lift up the EVF. EVF Cabi (upper) 2 VC-345: CN1016 7 Tapping (P2) x1 2 6 1 VC-345: CN1501 4 Tapping (P2) x2 Tapping (P2) x4 EVF Cabi (lower) 3 VC-345: CN4001 8 Lock ace x1 3 7 2 VC-345: CN1551 5 Boss Down the EVF. FP-797: LCD902 4 Lock ace x3 9 SS-5100 4 8 3 Lens sheet 6 Lens LSV-820A EVF block EVF lens 5 EVF/Battely panel block

2 2 3 7 3 1 2

8 4 5 6 1 1 1 1 Tapping (P2) x4 1 VF blind sheet 5 Claw 2 Claw x2 2 VC-345: CN2403, CN2404, CN3201 6 Open the VC-345. 1 Screw (M1.7) x3 3 P Cabi (C) 3 VC-345: CN2401 7 VC-345: CN2402 2 CS frame 4 Screw (M1.7) x2 8 VC-345 DCR-TRV380/TRV480/TRV480E 2-1 2-2 2-2. MECHANISM DECK SERVICE POSITION Connection to Check the Mechanism deck To check the mechanism deck, set the Camera or VTR to the "Forced power ON" mode. (Or, connect the control key block (SS-5100) to the CN1009 of VC-345 board and set the power switch to the "CAMERA" or "PLAY/EDIT" mode.) Operate the Camera functions of the zoom and focus, the VTR function using the adjustment remote commander (with the HOLD switch set in the OFF position).

Setting the "Forced Camera Power ON" mode Exiting the "Forced Power ON" mode 1) Select page: 0, address: 01, and set data: 01. 1) Select page: 0, address: 01, and set data: 01. 2) Select page: A, address: 10, set data: 01 and 2) Select page: A, address: 10, data: 00, and press the PAUSE press the PAUSE button of the adjustment remote button of the adjustment remote commander. commander. 3) Select page: 0, address: 01, and set data: 00. Setting the "Forced VTR Power ON" mode 1) Select page: 0, address: 01, and set data: 01. 2) Select page: A, address: 10, set data: 02 and 2 1 press the PAUSE button of the adjustment remote commander. 1

How to move up the cassette compartment manually Mechanism deck 2 B 5 6 Press the cassette compartment 7 A 9 in the direction of the arrow A to move it up in the direction of the arrow B. 4 1 1 8 Lens block 3 4 6

3 2 2 Info lithium battery 3 (L series) 1 7 CPC jig connector (J-6082-539-A) 1 6 1 Front panel block 5 Contacting 4 8 surface 4 VC-345 board 5 6

Adjustment remote commander (RM-95) I/F unit for LANC control (J-6082-521-A) 4 9 8 5 3 Cabinet R block 4 Eject switch EVF block/ 6 Battery panel block assembly 1 6 Control key block (SS-5100) 7 1 AC IN AC adaptor 2 3 4 5 2 When exiting the "Forced Power ON" mode, connect the control key block (SS-5100) to the CN1009 of VC-345 board. Or, when ejecting the cassette, connect the control key block (SS-5100) to the CN1009 of VC-345 board. and press the Eject switch.

DCR-TRV380/TRV480/TRV480E 2-3 2-4 2-3. LCD SERVICE POSITION

2

3

1

CPC jig connector 1 CN1011 Conductor side LCD panel 16

Back light unit CPC jig connector (J-6082-539-A) PD-205 board L serices Info LITHIUM battery (7.2Vdc) AC adaptor AC IN

AC adaptor AC IN

LANC jack Adjustment remote commander (RM-95)

I/F unit for LANC control (J-6082-521-A)

DCR-TRV380/TRV480/TRV480E 2-5 2-4. CIRCUIT BOARDS LOCATION VC-345

CD-472

SI-041

PD-205

Board Name Function CD-472 CCD IMAGER VC-345 A/D CONVERTER, TIMING GENERATOR, VIDEO/AUDIO DSP, LENS CONTROL, LENS DRIVE, Hi8/Std8 VTR PROCESS, VIDEO IN/OUT , DV SIGNAL PROCESS, REC/PB AMP, DV INTERFACE, STEADYSHOT, Hi8/Std8 PB AMP, USB/MODE CONTROL, MS INTERFACE, MEMORY, HI CONTROL, CAMERA/MECHA CONTROL, SERVO, AUDIO, DC CONTROL, CONNECTOR PD-205 LCD DRIVE, BACKLIGHT DRIVE SI-041 STEADYSHOT, JACK

2-5. FLEXIBLE BOARDS LOCATION FP-797 SS-5100 FP-794

FP-799

CF-5100 FP-792

FP-796

SB-9000 PR-5100

DCR-TRV380/TRV480/TRV480E 2-6E HELP

Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.

Harness (PD-124)

Claw

Claw

Insulating sheet (CF) Tape (CF) (TRV360/TRV460/TRV460:E/TRV461E)

Note: Close the LCD panel, when you work.

DCR-TRV380/TRV480/TRV480E HELP 3. BLOCK DIAGRAMS

Link

OVERALL BLOCK DIAGRAM (1/6) OVERALL BLOCK DIAGRAM (6/6)

OVERALL BLOCK DIAGRAM (2/6) POWER BLOCK DIAGRAM (1/3)

OVERALL BLOCK DIAGRAM (3/6) POWER BLOCK DIAGRAM (2/3)

OVERALL BLOCK DIAGRAM (4/6) POWER BLOCK DIAGRAM (3/3)

OVERALL BLOCK DIAGRAM (5/6)

DCR-TRV380/TRV480/TRV480E 3. BLOCK DIAGRAMS

3-1. OVERALL BLOCK DIAGRAM (1/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

LENS BLOCK CD-472 BOARD VC-345 BOARD (1/6) Hi8/Std8 PB C RF

IRIS Q951 CN951 CN1501 36 2 Hi8/Std8 1 CCD OUT IC951 7 BUFFER 1 14 30 ı AD0 – AD9 OVERALL (3/6) CCD IC 3701 Y OUT IC1502 11 (PAGE 3-5) 34 ADCK IMAGER ZOOM MOTOR FOCUS MOTOR IRIS S/H, AGC, A/D CONVERTER VCK METER 1 – 4 12 – 14 7 NIGHT M M (1/18) ı 18 1 2 SHOT LENS V1 – V4,RG,H1,H2 8 RG, H1, H2 CLPDM, PBLK, 19 M 9 2 XSHP, XSHD XRST VTR PLUS ZOOM FOCUS ı 21 21 OVERALL (4/6) TEMP 11 6 43 SENSOR SENSOR 22 15 ı SENSOR H ı 23 20 (PAGE 3-7) 14 16 25 4647 48 16 1 26 ı V1 – V4 TRV480/ 4 28 AD0 –AD9 IC1501 XRST VTR TRV480E CN1551 31 40 5 17 15 12 10 – 7 1 – 4 22 23 21 20 19 ADCK R1510 CLPOB TIMING 9 GENERATOR VCK VCK IRIS IRIS 12 BIAS(–) DRIVE(–) X1501 (1/18) R1507 TRV380 TEMP 27 MHz 44 TG HD, TG VD 3 4 45 OVERALL (2/6) IR SWITCH HALL GAIN IRIS ZSG1 ZSG1, ZV1, TG ID

IRIS BIAS(+) (PAGE 3-3) IRIS HALL(–) IRIS HALL(+) FC SENS OUT CONTROL DRIVE 34 ZM SENS OUT ZV1 VGAT

41 CH CS, SO, SCK ZOOM A,B,XA,XB 5 FOCUS A,B,XA,XB Q1554 Q1551 TG ID CAM DD ON 48 VGAT 5 7 17 19 2 4 21 23 1 2 5 14 8 36 EN0,EN1, DIR0A,B, DIR1A,B, IC1554 IC1552 FC RST, ZM RST (4/18) (4/18) 42 ZOOM FOCUS HALL HALL HALL IRIS MOTOR MOTOR BIAS AMP GAIN DRIVE CH CS, CH SO, CH SCK DRIVE DRIVE 47 35 37 13 – 16 9 – 12 3 6 7 12 10 ı CAM SI, CAM SO, CAM SCK, CAM CS 39 EN1, DIR1A, EN0, DIR0A, HALL HALL HALL ZM RST FC RST DIR1B DIR0B REF OFFSET GAIN CK CONT

XNS SW LENS TEMP AD HALL AD, HALL AD IRIS PWM LENS TEMP AD, XNS SW IRIS PWM PITCH AD, YAW AD 4 XVIDEO IN SI-041 BOARD (1/4) XCS IC 3701 OVERALL (4/6) CN1001 (PAGE 3-7) CN754 (1/4) (1/4) SE752 LIA 1 PITCH AD VD SO, VD SCK 30 7 8 2 PITCH SENSOR IC2001 LINE Y ON SE751 STEADYSHOT LIA 2 (9/18) YAW AD VSP SI, VSP SO, XVSP SCK YAW SENSOR 29 8 12 18 XCS AU1

6 DEM 0, 1, 7 XPWAD, XPWDA 13 IC5801 IC5402 9 MIC L,R 14 MIC901 INT MIC L,R 2 MIC AMP 12 20 – 22 23 AUDIO DATA TO SFD MICROPHONE 19 (16/18) 8 CN753 2 A/D, D/A DATA FROM SFD 2 4 REC OUT L, R 9 INT MIC L 63 5 3 CONVERTER SFD BCK L 1 33 4 (16/18) 12 5 INT MIC R AUDIO L,R I/O 3 7 PB IN L, R 15 SFD LRCK 32 5 10 OVERALL (2/6) 64 8 16 SFD FCK R 3 11 (PAGE 3-3) IC5401 KASYAON Q5401, 5402 AUDIO 57 Hi8/Std8 PB RF MUTE PROCESS 26 58 (16/18) AFM FSC 14 RF SWP

XCS IC 3701 VD SO, SCK 59 24 SP+,– 49 17 1.7M DEV, 1.5M DEV 11 9 10 51 18 AU BPF 28 6 46 BPF MONI 29 OVERALL (3/6) (PAGE 3-5) IC3701 FRQ TUNE VIDEO IN/OUT 1 HALL OFFSET, HALL GAIN, HALL REF (6/18) Q8504 IC8501 15 Hi8/Std8, LINE 36 VIDEO 5 A/D ı BUFFER AD0 C – AD9 C IC 3701 CONVERTER 24 VIDEO I/O VIDEO I/O IC 3701 C OUT 15 22 42 Y OUT (3/18) 14 7 AUDIO L I/O ADCK27

18 19 CPLVO Hi8/Std8, LINE OVERALL (2/6) J752 AUDIO R I/O 34 17 20 IC 8001 Y OUT IC 8001 Y OUT (PAGE 3-3) A/V AV JACK IN AV JACK IN Q3702, 3703 46 19 18 IC 8001 C OUT IC 8001 C OUT 7 MUTE 22 IC 2201 Y OUT Hi8/Std8 IC 2201 Y OUT 44 8 IC 2201 C OUT Hi8/Std8 IC 2201 C OUT 5 OVERALL (3/6) ACC-CONT 1 (PAGE 3-5) AGC-CONT 47 BEEP OVERALL (2/6) CONTROL KEY BLOCK (CF-5100) (1/2) AV JACK IN CN1008 9 (PAGE 3-4) SP901 1 SP+, – A : VIDEO SIGNAL SPEAKER 2 A : AUDIO SIGNAL ACC-CONT, AGC-CONT, CLPVO OVERALL (2/6) 10 (PAGE 3-3) 05 DCR-TRV380/TRV480/TRV480E 3-1 3-2 3-2. OVERALL BLOCK DIAGRAM (2/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

VC-345 BOARD (2/6) OVERALL (3/6) SPCK LCKO 139 20 (PAGE 3-5) 11 VCK RECDT RECDT 143 45 OVERALL (4/6) SPCK SI-041 BOARD (2/4) 268 119 120 47 RECA1,2 RECA1,2 (PAGE 3-7) 12 224 ı RYO0 – RYO3 ı 271 162 163 48 OVERALL (3/6) RECCK RECCK AD0 – AD9 231 41 16 (PAGE 3-5) 233 IC8001 279 70 71 ı RCO0 – RCO3 234 VIDEO/AUDIO DSP, 121 122 RF IN RF IN CLPOB 282 139 221 D/A CONVERTER, VCK LENS CONTROL 287 HYO, HCO 164 CN1001 CN754 241 LCKO (2/18) 288 165 IC6001 79 (2/4) (2/4) CN751 28 9 TG HD, TG VD 219 301 ADATAIN0,1 127 TRCKO DV SIGNAL 104 47 6 29 8 1 220 302 168 IC8301 ı ZSG1, ZV1, TG ID ZSG1 PROCESS 42 TPA+, –, TPB+, – 31 6 TPA, NTPA, TPB, NTPB ı DV 216 149 150 DV INTERFACE 9 4 (7/18) LBUS0-3 ı 32 5 ZV1 186 187 45 (9/18) OVERALL (1/6) 217 CAM DD ON TG ID 264 13 14 24 – 26 (PAGE 3-2) 3 236 ı RYI0 – RYI3 27 29 – 32 VGAT 72 73 D24A00 – D31A07, ALE, WRX, RDX 222 267 34 – 37 EN0,1, DIR0A,B, DIR1A,B EN0,1 239 272 54 55 57 248 273 123 – 125 XCS IC 8301 RCI0 – RCI3 275 166 107 109 110 DIR0A,B 246 D24A00 – D31A07, DXXA08, DXXA09, ALE, WRX, RDX D24A00 – D31A07, DXXA08, DXXA09, ALE, WRX, RDX 276 152 – 155 247 189 190 192 284 HYI, HCI 12 DIR1A,B 250 XCS IC 8301 XCS IC 8301 251 285 75 188 XCS IC 6001 XCS IC 6001 158 FC RST, ZM RST 237 298 ADATAOUT0,1 126 238 299 167 3 114 VSP SI, VSP SO, XVSP SCK VSP SI, VSP SO, XVSP SCK Hi8/Std8, LINE DSCK VM 157 252 15 AD0 C – AD9 C ı 58 261 CAM SI, CAM SO. CAM SCK. CAM CS IC 3701 C OUT Hi8/Std8, LINE XSYS RST 59 FRRV, TRRV, TRRT, DRP 33 62 111 OVERALL (4/6) OVERALL (1/6) ADCK27 17 (PAGE 3-7) 245 112 (PAGE 3-2) 7 SFD BCK HI SI, HI SO. XHI SCK. XCS MECHA 21 IC 8001 Y OUT SFD LRCK 53 78 60 IC 8001 C OUT 60

DATA TO SFD 86 87 FRRV, TRRV, TRRT FRRV, TRRV, TRRT, DRP DATA FROM SFD 168 89 169 SWP USB 3.1V SFD BCK OVERALL (1/6) 82 150 Q1007 (PAGE 3-2) 5 SFD LRCK ı 83 VSP SI, VSP SO, XVSP SCK USB SFD FCK 152 85 REC PROOF PULL UP KASYAON 154 156 CAM SI, CAM SO. CAM SCK. CAM CS 91 158 159 XCS IC8001 XCS IC 8001 149 SYS V SYS V 157 CN752 USB D+ 28 35 2 2 29 USB D+, USB D– USB D+, USB D– 34 3 D+, – 3 USB XEN 80 D755 VFI OE VCC (USB) 160 REC PROOF 36 1 1 ALIGN VD 234 185 161 USB D+, USB D– OVERALL (4/6) BIRDS VD 186 162 SYS V USB DET (PAGE 3-8) 13 BIRDS FLD IC5703 221 168 163 IC5701 LINEOUT V XTAL OSC 97 164 USB CONTROL, USB D+ PULL UP CN1015 VREF (11/18) ı 256 MS LED ON 165 HI SI, HI SO. XHI SCK. XCS MECHA 99 MEMORY STICK 2 X5703 MS XIN 48 MHz 237 INTERFACE, 5 LINEOUT V USB CLK USB CLK MODE CONTROL FOR JIG OVERALL (5/6) 24 177 1 XSYS RST DSCK VM DSCK VM (11/18) (PAGE 3-9) 14 141 119 122 MS DIO, MS BS, MS SCLK 6 7 121 122 16 – 18 D0 VM – D15 VM D0 VM – D15 VM 124 – 137 21 – 24 27 – 35 CN1016 98 78 2 ı A1 VM – A19 VM 1 – 4 7 – 12 81 MS DIO, MS BS, MS SCLK 4 EVF G/BW Y 46 116 A1 VM – A22 VM 291 – 298 85 6 MEMORY 301 – 304 STICK EVF HD, EVF VD 95 XCS EEP, MS XIN MS XIN 96 2 3 5 6 DSCK VM 80 5 198 – 205 35 EEP XRDY, 8 9 11 EEP RXD3, Q8001 207 208 IC8002 MS LED ON PANEL R MDQ0 T – MDQ15 T 12 39 40 2 3 5 6 EEP SCK3. 287 OVERALL (6/6) 40 210 – 215 42 43 45 16M 8 9 11 EEP TXD3 KEY AD 6 (PAGE 3-11) 15 PANEL G 46 48 49 SDRAM BUS DATA IC5501 IC5702 145 BUFFER 39 D0 VM – D15 VM 12 39 40 1 – 3 235 236 KEY AD 5 PANEL B (3/18) 42 43 45 16M EEPROM 5 6 103 – 105 144 45 171 174 19 – 24 KEY AD 4 MA0 T – MA10 T, MA12 T 46 48 49 SDRAM (11/18) 143 PANEL HD, PANEL VD 92 176 – 185 27 – 32

ADDRESS BUS KEY AD 1 (12/18) 140 TPX, TPY, TP SEL1 93 MEMCK OUT 19 – 24 196 35 A1 VM – A11 VM, A13 VM XCS SDRAM VM KEY AD 0 KEY AD 0, 1, 4, 5, 6 MXCSO 27 – 32 18 71 139 190 18 MS LED ON ACC-CONT, AGC-CONT, 93 OVERALL (1/6) CLPVO XCS FLASH ı IC 5001 RXD0, IC 5001 TXD0, IC 5001 SCK0, IC 5001 CS 66 29 – 36 26 69 96 18 (PAGE 3-2) 10 D0 VM – D15 VM IC5502 XSYS RST 38 – 45 12 OSD V OVERALL (5/6) 64 32M 220 XDS RESET (PAGE 3-9) 62 1 – 10 13 FLASH 86 A1 VM – A22 VM 16 – 25 (12/18) XVM MAD 274 48 Q5701, 5702 MELODY BEEP 230 MODURATOR SFD LRCK MELODY ENV 9 124 253 CAM DD ON AV JACK IN AV JACK IN OVERALL (1/6) 131 238 TP X (PAGE 3-2) 137 A : VIDEO SIGNAL TP SEL1 249 A : AUDIO SIGNAL TP Y IR ON TP SELECT SWITCH 138 254 19 A : VIDEO/AUDIO SIGNAL Q5703 TP SEL2 OVERALL (5/6) A : VIDEO/AUDIO/SERVO SIGNAL 250 (PAGE 3-10) 05 DCR-TRV380/TRV480/TRV480E 3-3 3-4 3-3. OVERALL BLOCK DIAGRAM (3/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

VC-345 BOARD (3/6) M2000 MECHA DECK (1/2)

VIDEO HEAD ODD RECDT RECDT 46 CN3201 FLYING RECA1,2 RECA1,2 40 ERASE 3 ODD (SP1) 5 16 42 RECCK RECCK 4 4 44 OVERALL (2/6) IC3201 10 EVEN (SP2) 7 (PAGE 3-4) RF IN RF IN REC/PB AMP 9 8 35 DV PB RF (8/18) TRV480/TRV480E 25 Q3206 – 3209 RF MON 30 PB C RF Hi8/Std8 EVEN Hi8/Std8 PB ON SWITCH

PB FBDP XME/MP 22 13 LPF FO SW PS 1 36 37 Hi8/Std8 187 AGC EVR ALL PS OVERALL (1/6) AD0 – AD9 ı 34 43 (PAGE 3-2) 196 ADCK 38 185 IC2201 VCK 198 Hi8/Std8 VTR PROCESS IC 2201 Y OUT Hi8/Std8 (5/18) RF AGC OUT

8 4 51 9 RF SWP Q3202, 3204, 3205 IC 2201 C OUT Hi8/Std8 PB C RF 213 49 11 18 XMP/ME FE (X) OVERALL (1/6) PB RF IC3001 ERASE HAED 11 (PAGE 3-2) 14 Hi8/Std8 Q3001 OSC 95 PB AMP AGC AGC SLOW DOP 10 VD SI, VD SO, VD SCK ı 77 7 (10/18) CONTROL 97 Q2207 REC Y/MT CONT RP POWER SAVE AFC F0 3 46 VCO 53 REC L CONT RP PB MODE 48 13 RP IR JOG VD 8 83 DOC DET X1/2 SWP 12 Q3002 84 MT FO RF ENV DET SWP DIR 15 5 BUFFER 85 MT Q ATF SAMPLE 19 87 SYS V AFM FSC 88 79 DRUM 8PB MECHA HD, MECHA VD 93 XME/MP 94 SW PS 21 CK CONT 101 ALL PS XTBC V RST OVERALL (4/6) 157 XFE ON (PAGE 3-8) TBC VD AFC F0 ADJ 20 158 66 XCS IC 2201 OVERALL (4/6) 98 XRST IC 2201 (PAGE 3-7) 99 67 SPCK 81 AGC SLOW RP POWER SAVE RP PB MODE RF ENV DET CN1011 (1/3) RF MON DOP 9 RF SWP SW DIR CPC 5 PB RF (FOR CHECK) 2 BPF MONI 3 MT FO 16 5 DA STRB MT Q 15 20 AFC F0 ADJ 23 27 CAM SO, CAM SCK REC Y/MT CONT 28 IC1601 3 REC L CONT 11 EVR 4 SPCK RP IR OVERALL (2/6) (D/A CONVERTER) 24 (10/18) DOC DET (PAGE 3-3) HALL OFFSET, HALL GAIN, HALL REF 17 26 ı 19 XMP/ME FREQ TUNE 6 22 PB FBDP AU BPF 8 10 LPF FO 12 1.7M DEV, 1.5M DEV 9 AGC EVR 21 6 11 OVERALL (1/6) (PAGE 3-2) RF SWP AFM FSC A : VIDEO SIGNAL PB RF A : AUDIO SIGNAL BPF MONI A : SERVO SIGNAL A : VIDEO/SERVO SIGNAL A : VIDEO/AUDIO/SERVO SIGNAL 05

DCR-TRV380/TRV480/TRV480E 3-5 3-6 3-4. OVERALL BLOCK DIAGRAM (4/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

VC-345 BOARD (4/6) OVERALL (2/6) SPCK SPCK 35 (PAGE 3-3) 12 IC2401 (3/3) 38 VSP SO, XVSP SCK M2000 MECHA DECK (2/2) 36 (15/18) XRST VTR 34 SERIAL OVERALL (1/6) XRST VTR XCS IC 2401 INTERFACE IC2401 (1/3) M901 100 16 37 CN2402 (PAGE 3-2) 2 (15/18) DRUM MOTOR 25 IC1301 (1/2) Q1310 63 62 DRUM PWM DRUM ERROR DRUM VS 64 U, V, W 10 88 44 45 6 62 SWITCHING 65 ı CH CS, CH SO, CH SCK 73 DRUM/CAPSTAN 67 DRUM M LPF 68 5 71 CAP PWM CAP ERROR PWM DRIVE MOTOR 89 41 43 9 (17/18) 61 SWITCHING DRIVE 69 Q2402 24 Q1309 VSP SI, VSP SO, XVSP SCK 70 DRUM Hi8/Std8 DRUM FG FG 67 11 53 FG AMP 52 3 DRUM FG MODE SWITCH VSP SO, SI, XVSP SCK 78 DRUM PG PG DRUM FG 50 PG AMP 49 1 DRUM PG 77 197 CAM SI, CAM SO, CAM SCK, CAM CS DRUM PG 75 198 161 CK CONT DRUM 8PB M902 189 CN2403 ALL PS CAPSTAN MOTOR HALL AD, 28 74 LENS TEMP AD, XNS SW SW PS 21 CAP U, V, W 14 HALL AD 29 76 ı M 128 OVERALL (3/6) CAP VS 75 LENS TEMP AD XME/MP CAPSTAN 78 HU1, 2 9 127 37 (PAGE 3-6) 77 OVERALL (1/6) XNS SW XFE ON MOTOR HV1, 2 187 170 CAP FWD, CAP ON 1 10 7 (PAGE 3-2) 4 DRIVE ı HW1,2 IRIS PWM CAP FWD, CAP ON ı HU, HV, HW 94 IC4501 166 80 15 2 PITCH AD, YAW AD PITCH AD 165 129 CAMERA/ YAW AD 130 CAP FG CAP FG 7 FG1, 2 18 MECHA 190 4 CAPSTAN FG CONTROL FG AMP 8 16 XVIDEO IN 112 (14/18) XCS IC 3701 DEW AD DEW AD 99 119 22 DEW SENSOR LINE Y ON 113 106 21 S901 XCS AU1 MODE SW A – C MODE SW A-C 43 ı ı MODE SWITCH DEM 0, 1, XPWAD, XPWDA 108 19 76 IC2401 (2/3) M903 97 LOAD, LOAD, (15/18) CN2401 LOADING MOTOR UNLOAD UNLOAD VD SO, VD SCK 137 15 32 LOADING 69 LM (+) , LM (–) 2 M 139 13 33 MOTOR 72 1 LM LIM DET LM LIM DET DRIVE 138 31 D001 VD SI, VD SO, VD SCK CN2404 TAPE TAPE END TAPE END TAPE END (C) Q002 LED OVERALL (6/6) 31 21 TAPE END 20 2 TAPE END (PAGE 3-11) 22 DETECT SENSOR EVF DD ON 117 XCS LCD TAPE TOP TAPE TOP TAPE TOP (C) Q001 38 30 19 TAPE TOP 18 1 TAPE TOP DETECT SENSOR 83 82 T REEL FG T REEL FG VD SI, VD SO, VD SCK 192 29 26 T REEL (+) , (–) 9 80 T REEL T REEL H001 FG AMP 27 10 SENSOR CAM SO, CAM SCK S REEL FG S REEL FG 193 25 S REEL (+) , (–) 6 S REEL 22 S REEL H002 AFC F0 110 FG AMP 23 7 SENSOR JOG VD 168 X1/2 SWP 169 Q2401 SWP DIR VSP SO, SI, XVSP SCK 171 TAPE LED ON TAPE LED (K) ATF SAMPLE 180 LED DRIVE 3

CAM SI, SO, SCK, CS 156 S001 SYS V REC PROOF 181 13 REC PROOF ME SW ME SW MECHA HD, MECHA VD 173 109 12 ME/MP OVERALL (3/6) HI8 MP SW HI8 MP SW 202 120 14 HI8 MP (PAGE 3-5) 20 CK CONT XCC DOWN 15 TBC V RST C. C. LOCK 188 S002 TBC VD XCC DOWN 205 XCS IC 2201 ZOOM VR AD 154 135 23 XRST IC 2201 132 8 OVERALL (5/6) AGC SLOW XSYS RST (PAGE 3-9) 214 9 RP POWER SAVE 26 USB XEN RP PB MODE 195 196 VFI OE RF ENV DET 68 115 ALIGN VD RF SWP 207 172 BIRDS VD 13 DA STRB 203 59 BIRDS FLD OVERALL (2/6) DOP 185 194 LINEOUT V (PAGE 3-3) CN1011 (2/3) 201 CAP FG CAM SI, CAM SO, CAM SCK, CAM CS VREF 4 204 CPC XCS EEP (FOR CHECK) VSP SI, VSP SO, XVSP SCK 16 3 1 63 X4501 EEP SI, EEPSO, EEP SCK 14 HI SI, HI SO, XHI SCK, XCS MECHA ı 20MHz 66 15 1 45 – 52 32 33 XCS EEP D24A00 – D31A07, DXXA08, DXXA09, ALE, WRX, RDX 10 1 22 24 25 IC4502 FP-792 FLEXIBLE OVERALL (2/6) 87 2 SI-041 BOARD 17 XCS IC 8301 EEPROM (3/4) BOARD (PAGE 3-4) 18 86 EEP SI, EEPSO, EEP SCK 5 XCS IC 6001 84 6 (14/18) 215 D001 – 003 XCS IC 8001 155 CN754 (VIDEO LIGHT) FRRV, TRRV, TRRT, DRP TRRV Q1002 179 CN1001 (3/4) (3/4) SYS V TRRT VIDEO LIGHT VL+ LND754 178 VL 16V 1 36 REC PROOF FRRV DRIVE 23 DRP 163 SWP V LIGHT PWM 164 91 A : VIDEO SIGNAL 05 A : SERVO SIGNAL

DCR-TRV380/TRV480/TRV480E 3-7 3-8 3-5. OVERALL BLOCK DIAGRAM (5/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

CONTROL KEY PD-205 BOARD (1/2) VC-345 BOARD (5/6) BLOCK (SB-9000) S001 – 003 CN6006 FUNCTION 2 ı SW 4 29 X5001 10MHz 28 X5002 52 SI-041 BOARD (4/4) CONTROL KEY OVERALL (2/6) IR ON 32.768kHz BLOCK (PR-5100) 51 19 CN6001 (PAGE 3-4) S601 CN6005 D759 (1/2) CN1003 (1/2) CN1001 (4/4) CN754 (4/4) (TALLY) PANEL XF TALLY LED XF TALLY LED 1 KEY AD4 KEY AD4 16 12 25 REVERSE 20 20 D753, 754 2 SW (IR EMITTER) D1001 SIRCS PWM/ SIRCS PWM Q751 45 IR DRV EN IC5001 17 20 LED DRIVE HI CONTROL CONTROL KEY BLOCK (SS-5100) (13/18) CN1009 XPHOTO FREEZE 15 IC751 S003 KEY AD5 KEY AD5 SIRCS SIG XSIRCS SIG REMOTE PHOTO 14 41 14 23 1 COMMANDER RECEIVER D004 XCHARGE LED XCHARGE LED CHG 6 9 S001 START/STOP KEY AD6 CAMERA XS/S SW 1 SW D003 XCAM LED XCAM LED CN1011 (3/3) TAPE 7 10 LANC OUT D002 40 11 XMEM LED XMEM LED LANC IN CPC MEMORY 8 11 39 12 XLANC POWER ON (FOR CHECK) D001 7 13 XVTR LED XVTR LED PLAY/EDIT 9 12

(CHG) OFF S004 XPOWER SW XPOWER SW 4 1 POWER ON XMODE SW XMODE SW 3 2 > MODE S002 XEJECT SW XEJECT SW EJECT SW 16 4 BL CONT BL REG 14 OVERALL (6/6) RV001 24 (PAGE 3-11) ZOOM VR ZOOM VR12 ZOOM VR AD D 1.2V A 1.5V CONTROL KEY BLOCK (CF-5100) (2/2) D 1.5V RP 2.8V CN1007 A 2.8V FUNCTION KEY AD0, 1 5 KEY AD0, 1 D 2.8V SW 14 AU 2.8V Q1009 D 1.9V IC1301 (2/2) D002 XCUSTOM LED LED A 4.6V DC CONTROL, 9 17 EASY DRIVE AU 4.6V RESET, EP 4.6V LANC DRIVER Q1006 (17/18) RP 4.6V D001 XMS LED 11 LED RP 6.0V VTR UNREG (MS ACCESS) DRIVE MT 5V BATT UNREG BT901 S001 CN4001 VL 16V Q4003, 4004 Q4001, 4002 DISP/ XBATT INFO SW 4 6 6 CAM –7.5V + BATT INFO SW CAM 15V 3 – DC IN S002 XRESET EP 13.5V RESET SW 22 73 CHARGE LI 3V EVER 3.0V CONTROL 2 BT001 3 VOUT LITHIUM BATTERY 20 27 6 + HI EVER SO, HI EVER SCK BATTERY 21 28 5 S TERMINAL BATT IN 1 – 31 44 ZOOM VR AD VTR DD ON 35 38 OVERALL (4/6) XCC DOWN XCS DD 5 67 26 (PAGE 3-8) 23 XSYS RST 18 VBAT BATT/XEXT 39 77 XSYS RST FAST CHARGE D1301 OVERALL (2/6) 37 XRESET REG 3V LINEOUT V INIT CHARGE ON 45 40 (PAGE 3-3) 14 32 38 MS LED ON Q5001 23 ı IC 5001RXD0, IC 5001 TXD0, IC 5001 SCK0, IC 5001 CS 43 BATTERY BATT SIG 26 AST CHARGE

CHARGE F BATT/XEXT SIG BATT OSD V 42 INIT CHARGE ON OVERALL (2/6) 19 DETECTOR (PAGE 3-4) 18 XDS RESET 44 XVM MAD 33 KEY AD0, 1, 4, 5, 6

05 DCR-TRV380/TRV480/TRV480E 3-9 3-10 3-6. OVERALL BLOCK DIAGRAM (6/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

VC-345 BOARD (6/6) EVF BLOCK CN1013 EVF G/BW Y 6 LCD902 B/W EVF DD ON NSLEEP LCD UNIT 2 EVF HD HSYNC 4 OVERALL (4/6) XCS LCD EVF VD VSYNC 5 (PAGE 3-7) 22 VD SI, VD SO, VD SCK

OVERALL (5/6) BL CONT (PAGE 3-10) 24

PD-205 BOARD (2/2)

EVF G/BW Y

EVF HD, EVF VD LCD901 CN1003 (2/2) CN6001 (2/2) CN6004 PANEL R PANEL R VR R 10 10 40 19 4 PANEL G PANEL G VG G 9 9 39 20 5 PANEL B PANEL B VB B 8 8 38 21 3 Q6004, 6005 2.5 INCH XCS LCD D/A VP PSIG COLOR 13 13 45 25 PSIG DRIVE 6 LCD UNIT IC6001 2 RGT, HCK1,2, 2 7 REF, HST, WIDE, LCD DRIVER ı 8 PANEL HD C SYNC/XHD 4 DWN, EN, 12 12 43 11 VCK, VST PANEL HD, PANEL VD PANEL VD PANEL XVD 6 RGT, HCK1, 2, REF, HST, WIDE, DWN, EN, VCK, VST 11 11 42 14 12 15 13 OVERALL (2/6) 32 19 (PAGE 3-3) 15 Q6008, 6009 ı ı 22 35 TOUCH PANEL I/F CN6007 TP R 14 14 46 1 VD SI, VD SO, VD SCK ı ı SI, SO, SCK ı TP BOT 16 16 48 4 TOUCH TP TOP 5 PANEL TP L 2

T6001, Q6002 BL CONT 4 4 28 BL DET INVERTER 30 CN6003 29 TRANSFORMER BL HIGH BL REG BACKLIGHT 10 DRIBE

TP X, TP Y, TP SEL1 TP SEL1 TP SEL1 6 6 ND901 TP X TP X 5 5 BACKLIGHT TP Y TP Y 7 7 D6004 BL LOW 3 A : VIDEO SIGNAL

05

DCR-TRV380/TRV480/TRV480E 3-11 3-12 3-7. POWER BLOCK DIAGRAM (1/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

BT901 BATTERY VC-345 BOARD (1/2) Q4003, 4004 TERMINAL MT 5V CN4001 CHARGE Q1002 CN1001 CONTROL VIDEO BATT UNREG VL+ + 6 LIGHT 1 BATT SIG D4001 DRIVE S 5 BATT GND INIT CHARGE ON Q1316, 1318, 1320 – 1 F003 15 MT 5V 5V REG A 16 D 2.8V 13 POWER(3/3) FAST CHARGE F001 VTR UNREG (PAGE 3-17) 10 A 2.8V 11 ACV UNREG F004 + 4 BATT/XEXT Q4001, 4002 DC IN 2 V LIGHT PWM F002 D1302 55 VCC1 ACV GND BATT UNREG MT 5V – 3 56 VCC0 VTR UNREG IC1301 L1322 A 1.5V DC CONTROL, RESET Q1305 L1305 (17/18) L1309 D 1.5V IC5001 36 CDET SWITCHING HI CONTROL VIN Q1326, 1327 43 D 1.9V (13/18) OUT1 57 1.9V REG IN1 20 BATT SENSE 65 EVER 3.0V VR ACV SENSE 66 41 VRO 34 29 RST L1314 37 FAST CHARGE LI 3V D 2.8V 39 VBAT 38 Q1307 L1303 INIT CHARGE L1313 A 2.8V 40 REG 3V SWITCHING D1301 L1315 V OUT AU 2.8V 42 VOUT OUT3 59 Q5001 IN3 22 L1312 RP 2.8V BATTERY VTR DD ON BATT SIG 43 IB SI VTR DD ON 35 38 CTL1 CHARGE D1303 Q1304, 1314 42 IB SO CAM –7.5V DETECTOR XCS DD –7.5V REG XCS DD 67 26 LD HI EVER SO FR EVER SO 20 27 BATT/XEXT DIN Q1302, 1312, 1313 77 BATT/XEXT HI EVER SCK CAM 15V FR EVER SCK 21 28 CLK +15V REG BATT IN CAM DD ON BATT IN 31 44 CS B POWER(2/3) D1306 L1311 Q1301, 1303 HOTSHOE ID1 54 EP 13.5V (PAGE 3-15) HOTSHOE ID2 55 13.5V REG

Q1311 L1308 IC1302 1 RP 6.0V SWITCHING 4 CONTROL KEY 5 6V REG (17/18) BLOCK (CF-5100) CN1007 L1301 LI 3V L1319 BT001 3 EP 4.6V LITHIUM Q1308 L1304 BATTERY L1317 A 4.6V SWITCHING D002 L1318 CUSTOM LED VDD MT 5V AU 4.6V EASY 7 OUT4 60 L1320 IN4 23 RP 4.6V D 2.8V 17 Q1328 FUNCTION D 2.8V L1321 15 D 1.2V SWITCH D 2.8V 1.2V REG 4 OUT7 63 –INE7 2 D001 MS LED VDD (MS ACCESS) 13 Q1317 DC CONTROL Q1306 L1302 L1310 CN1003 SWITCHING PANEL 13.3V CONTROL KEY 19 37 VREF BLOCK (SS-5100) OUT2 58 1 DTC6 EP 4.6V PANEL 4.6V IN2 21 18 C RV001 CN1009 W (ZOOM) T RT BL CONT BL CONT POWER(3/3) D 2.8V 30 +INE2 14 4 11 (PAGE 3-17) BL REG 2 D004 CHARGE LED VDD EVER 3.0V VTR DD ON CAMERA CHG 5 D003 TAPE MODE LED VDD D 2.8V D 2.8V 10 D002 MEMORY D001 PLAY/EDIT 05

DCR-TRV380/TRV480/TRV480E 3-13 3-14 3-8. POWER BLOCK DIAGRAM (2/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

M2000 MECHA DECK EVF BLOCK H001,002 D001 LCD902 T REEL, TAPE CAPSTAN CN1013 S REEL, HU, HV, HW B/W LED FG 3.3V SENSOR 1 LCD UNIT

EP 4.6V EVF 4.6V 3 4 8 17 8 CN2404 CN2403 VC-345 BOARD (2/2) TRV480/TRV480E VH+

FG VCC IC1001 IC2401 5 3.3V REG 4 SENSOR VCC TAPE LED (A) DRUM/ (18/18) IC3201 IC3001 CAPSTAN/LOADING REC/PB Hi8/Std8 MOTOR AMP PB AMP DRIVE VMR 3 1 (8/18) (10/18) (15/18) VH 17 D 2.8V

USB 3.1V L3201 L3202 L3001 FB2401 RP 4.6V IC1552 V LIGHT PWM IRIS DRIVE, IC2001 IC1554 MT 5V MT 5V IC1502 IC1501 HALL BIAS CONTROL, STEADY VTR UNREG VTR UNREG S/H. AGC. TIMING HALL GAIN CONTROL, FOCUS/ZOOM SHOT A/D CONVERTER GENERATOR HALL AMP MOTOR DRIVE EP 13.5V (9/18) (1/18) (1/18) (4/18) (4/18) CD-472 BOARD L2001 L1501 L1552 L1553 FB1501 FB1502 MT 5V MT 5V CN1501 CN951 CAM –7.5V CAM –7.5V CAM –7.5V IC951 12 3 CAM 15V CAM 15V CAM 15V CCD 10 5 A 2.8V L951 IMAGER A 1.5V D 1.5V D 1.5V D 1.5V D1.9V D1.9V CN1551 LENS BLOCK D 2.8V D 2.8V D 2.8V D 2.8V IRIS DRIVE (+) IRIS 24 A 2.8V A 2.8V METER TEMP TEMP AU 2.8V 18 SENSOR Q1555 ZM SENS VCC ZOOM 16 B RP 2.8V A 4.6V A 4.6V SENSOR FC SENS VCC FOCUS POWER (1/3) 13 AU 2.8V SENSOR (PAGE 3-14) AU 4.6V L8301 L3701 L3705 CAM –7.5V FB8301 FB8302 CAM 15V FB1601 FB1602 FB4501

CN1016 IC5401 IC5402 IC5801 IC4502 IC1002 IC1601 IC8301 IC3701 IC4501 3 VCC 5 4 MEMORY AUDIO PROCESS AUDIO MIC AMP EVR DV INTERFACE VIDEO IN/OUT CAMERA/MECHA EEPROM 2.9V REG 7 STICK (16/18) A/D, D/A (16/18) (D/A CONVERTER) (9/18) (6/18) CONTROL (14/18) (18/18) CAM DD ON CONVERTER (10/18) (14/18) 1 (16/18) EP 13.5V ZM RST LED 55 RP 6.0V FC RST LED 57 EP 4.6V EP 4.6V A 4.6V AU 4.6V 91 RP 4.6V STROBO PWM D 1.2V D 1.2V CN1015 USB 3.1V USB 3.1V USB 3.1V 8 A 1.5V D 1.5V D 1.2V FOR JIG D 2.8V D 2.8V D 2.8V 3 A 2.8V FB5501 FB5702 FB5701 FB5703 FB5704 FB8003 L8002 FB8002 FB8001 L8003 L6003 L6001 L6004 L6007 L6008 FB8502 FB8501 FB6002 FB2205 L2202 L2208 FB2204 FB2202 L2209

IC8001 IC8002 IC8501 IC6001 IC5502 IC5501 IC5703 IC5702 IC5701 XTAL OSC EEPROM VIDEO/AUDIO DSP, 16M SDRAM A/D CONVERTER DV SIGNAL PROCESS 32M FLASH 16M SDRAM USB CONTROL, IC2201 (11/18) (11/18) D/A CONVERTER, (3/18) (3/18) (7/18) (12/18) (12/18) MEMORY STICK LENS CONTROL Hi8/Std8 VTR PROCESS INTERFACE, (2/18) (5/18) MODE CONTROL (11/18) MS VCC ON 286 CAM DD ON TRV480/TRV480E CAM DD ON 131 CAM DD ON

05

DCR-TRV380/TRV480/TRV480E 3-15 3-16 3-9. POWER BLOCK DIAGRAM (3/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

SI-041 BOARD

D753, 754 (IR EMITTER) CN754 MT 5V 21 22 IC751 D 2.8V 24 REMOTE COMMANDER RECEIVER D759 A (TALLY) POWER(1/3) (PAGE 3-14) SE751, 752 FP-792 FLEXIBLE BOARD A 2.8V 26 PITCH, YAW 27 SENSOR D001 – 003 (VIDEO LIGHT)

VL+ LND754 36

PD-205 BOARD LCD901 CN6004 CN6001 Q6006 PANEL 13.3V VDD 19 18

2.5INCH PANEL 4.6V IC6002 COLOR 18 5 4 VDOG 16 LCD UNIT 1 2.8V REG L6001 D6001

C IC6001 LCD DRIVER POWER(1/3) (PAGE 3-14) 28 EXTDA BL CONT 4 29 FBACK XPOFF 16

T6001, Q6002 CN6003 L6002 L6003 INVERTER BL REG BL HIGH ND901 2 TRANSFORMER 10 BACK BACKLIGHT LIGHT DRIVE

05

DCR-TRV380/TRV480/TRV480E 3-17 3-18E 4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS

4-1. FRAME SCHEMATIC DIAGRAM

1 2 345 6789 10 1112 1314 15 16 17 18 19 20

FRAME SCHEMATIC DIAGRAM A

CN951 14P

V4 14 V3 13 V2 12 B V1 11 GND 10 H2 9 FP-794 FP-301 FP-302 CD-472 H1 8 FLEXIBLE M2000 MECHANISM DECK LENS RG 7 FLEXIBLE FLEXIBLE EVF BLOCK BOARD GND 6 BOARD BOARD BLOCK (CCD IMAGER) CAM_15V 5 VSHT 4

CAM_-7.5V 3 FP-228 FP-299 LCD902 FP-802 FLEXIBLE B/W C GND 2 FLEXIBLE FLEXIBLE LCD BOARD UNIT CCD_OUT 1 BOARD BOARD

M901 M903 VIDEO M902 HEAD DRUM LOADING MOTOR MOTOR FP-300 FLEXIBLE CAPSTAN BOARD MOTOR D FP FP FP FP 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1 2 1 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 9 8 7 6 5 4 3 2 1 15 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 11 10 14 13 12 11 10 10 10 11 12 13 14 22 21 20 19 18 17 16 15 14 13 12 11 10 ANA_GND DIG_GND VIDEO_IN VSYNC HSYNC EVF_4.6V NSLEEP 3.3V NC NC V V U U 2P W W V1 V2 V3 V4 FG H1 H2 PG RG 15P 14P 11P VH- 22P FG1 FG2 24P 10P HV1 HV2 VH+ HU2 HU1 9 8 7 6 5 4 3 2 1 GND GND GND GND GND GND GND GND GND DEW HW1 HW2 COM FE(Y) FE(X) LM(-) 10 VSHT TEMP TEMP LM(+) CAP_V CAP_V CAP_U CAP_U ME/MP FG VCC CAP_W CAP_W HI8_MP M-SW(B) M-SW(C) M-SW(A) ZOOM_B ZOOM_A S_REEL(-) T_REEL(-) CN1013 8P FOCUS_B FOCUS_A CAM_15V REG_GND REG_GND S_REEL(+) T_REEL(+) CCD_OUT LENS_DET ZOOM_XB ZOOM_XA FOCUS_XB FOCUS_XA IR_SWITCH IR_SWITCH CAM_-7.5V CN2401 IRIS_BIAS(-) HALL_COM REC_PROOF IRIS_BIAS(+) IRIS_HALL(-) FG-PG_COM C_LOCK_SW YODD(SP1Y) XODD(SP1X) CN3201 TAPE_LED(K) IRIS_DRIVE(-) IRIS_HALL(+) XEVEN(SP2X) CN1501 CN2402 TAPE_LED(A) YEVEN(SP2Y) CN2404 TAPE_TOP(C) 3.3V 1 CN2403 SENSOR_VCC CN1551 TAPE_END(C) IRIS_DRIVE(+) FC_SENSE_VCC FC_SENSE_OUT ZM_SENSE_VCC ZM_SENSE_OUT NSLEEP 2 E EVF_4.6V 3 FP-792 HSYNC 4 FP-797 VSYNC 5 FLEXIBLE MIC901 FLEXIBLE MICROPHONE VIDEO_IN 6 R L DIG_GND 7 BOARD ANA_GND 8 CN1009 16P (VIDEO LIGHT) XS/S_SW 1 F REG_GND 2

4 3 2 1 XMODE_SW 3

VL+ XPOWER_SW 4 4P

GND GND CN754 36P CN1001 36P CHARGE_LED_VDD 5 REG_GND REG_GND VL+ 36 1 VL+ XCHARGE_LED 6 CONTROL CN753 INT_MIC_L INT_MIC_R MIC_GND 35 2 MIC_GND XCAM_LED 7 MIC_GND 34 3 MIC_GND XMEM_LED 8 KEY INT_MIC_L 33 4 INT_MIC_L VC-345 BOARD XVTR_LED 9 LND754 LND757 LND763 G INT_MIC_R 32 5 INT_MIC_R MODE_LED_VDD 10 BLOCK VREF1 31 6 VREF1 (1/18) (A/D CONVERTER, TIMING GENERATOR) D_2.8V 11 LIA1 30 7 LIA1 ZOOM_VR 12 (SS-5100) CN1011 16P LIA2 29 13 8 LIA2 16 XCS_EEP (2/18) (VIDEO/AUDIO DSP, LENS CONTROL) REG_GND VREF2 28 9 VREF2 KEY_AD5 14 15 EEP_SI (3/18) (MEMORY, A/D CONVERTER) A_2.8V 27 15 10 A_2.8V 14 EEP_SO XPHOTO_FREEZE 26 XEJECT_SW 16 A_2.8V 11 A_2.8V 13 XLANC_POWER_ON (4/18) (LENS DRIVE) XF_TALLY_LED 25 12 XF_TALLY_LED 12 LANC_IN (5/18) (Hi8/Std8 VTR PROCESS) CN1015 8P 24 H D_2.8V 13 D_2.8V 11 LANC_OUT MS_SCLK 1 23 XSIRCS_SIG 14 XSIRCS_SIG 10 REG_GND (6/18) (VIDEO IN/OUT) MS_LED_ON 2 MT_5V 22 15 MT_5V D_2.8V 3 CPC 9 RF_MON (7/18) (DV SIGNAL PROCESS) 21 MT_5V 16 MT_5V REG_GND REG_GND 4 (FOR CHECK) 8 (FOR JIG) SIRCS_PWM/IR_DRV_EN 20 17 SIRCS_PWM/IR_DRV_EN (8/18) (REC/PB AMP) MS_XIN 5 SI-041 7 N.C AV_JACK_IN 19 18 AV_JACK_IN MS_DIO 6 6 REG_GND (9/18) (DV INTERFACE, STEADYSHOT) AUDIO_L_I/O 18 AUDIO_L_I/O BOARD 19 5 SW_DIR MS_BS 7 AUDIO_R_I/O 17 AUDIO_R_I/O 20 4 CAP FG (10/18) (Hi8/Std8 PB AMP) USB_3.1V 8 I REG_GND 16 21 REG_GND CN1016 STEADYSHOT, 3 BPF MONI (11/18) (USB/MODE CONTROL, MS INTERFACE) 8P VIDEO_I/O 15 22 VIDEO_I/O VSS 1 JACK FP-796 FLEXIBLE 2 8mm PB RF REG_GND 14 23 REG_GND BS 2 1 EEP_SCK (12/18) (MEMORY) S_Y_I/O (N.C.) 13 24 S_Y_I/O (N.C.) (13/18) (HI CONTROL) VCC 3 MEMORY CN752 7P XS_JACK_IN (N.C.) 12 25 XS_JACK_IN (N.C.) DIO 4 MEMORY STICK 1 VCC S_C_I/O (N.C.) 11 26 S_C_I/O (N.C.) (14/18) (CAMERA/MECHA CONTROL) INS 5 STICK 6 FP-799 2 D- REG_GND 10 27 REG_GND (15/18) (SERVO) SCLK 6 FLEXIBLE CONNECTOR 3 D+ NTPA 9 28 NTPA VCC 7 (USB) J 4 ID TPA 8 29 TPA (16/18) (AUDIO) VSS 8 7 5 GND REG_GND 7 30 REG_GND (17/18) (DC CONTROL) CN4001 6P TPB 6 31 TPB BATT_GND 1

NTPB 5 32 NTPB (18/18) (CONNECTOR) BATT/XEXT 2 REG_GND 4 33 REG_GND ACV_GND 3 BT901 5 CN751 6P BATTERY USB_D- 3 34 USB_D- ACV_UNREG 4

1 NTPB 20P TERMINAL USB_D+ 2 35 USB_D+ BATT_SIG 5 2 TPB DV USB_DET 1 36 USB_DET BATT_UNREG 6 3 NTPA KEY_AD4 PANEL_13.3V PANEL_4.6V REG_GND VD_SI(HDO) VD_SO VD_SCK XCS_LCD_DA C-SYNC/XHD PANEL_XVD PANEL_R PANEL_G PANEL_B TP_Y TP_SEL1 TP_X BL_CONT BL_GND BL_REG SE_GND CN1003 K 4 TPA 9 8 7 6 5 4 3 2 1 6 20 19 18 17 16 15 14 13 12 11 10 LCD901

PD-124 2.5INCH COLOR

HARNESS 2P LCD UNIT 22P TOUCH PANEL SP(+) SP(-) 8 7 6 5 4 3 2 1 9 20 19 18 17 16 15 14 13 12 11 10 N.C N.C REG_GND N.C LI_3V D_2.8V KEY_AD0 BATT_INFO CUSTOM_LED_VDD XCUSTOM_LED_ON REG_GND XMS_LED MS_LED_VDD KEY_AD1 D_2.8V KEY_AD3 (N.C.) D_2.8V (N.C.) KEY_AD2 (N.C.) DIAL_A (N.C.) DIAL_B (N.C.) REG_GND (N.C.) XRESET CN1008 CN1007 ND901 1 2 3 4 5 6 7 8 9 CN6005 6P 1 2 10 11 12 13 14 15 16 17 18 19 20 21 22 L 20P BACKLIGHT TP_Y TP_X

6 SE_GND VD_SO BL_REG VD_SCK SE_GND BL_GND TP_SEL1 KEY_AD4 PANEL_R PANEL_B PANEL_G BL_CONT 5 SE_GND REG_GND VD_SI(HDO) PANEL_4.6V PANEL_XVD C-SYNC/XHD CN6001 PANEL_13.3V XCS_LCD_DA CONTROL KEY BLOCK 4 N.C. 3 N.C. 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 6 5 4 3 2 1 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 10 2 PANEL_REV B R G

(PR-5100) 6P CS EN

PANEL_REV 10P 1 N.C N.C N.C N.C N.C N.C 24P N.C. N.C. REF HST VSS VDD DWN VCK VST COM RGT TP_L TP_R

PSIG HCK1 HCK2 SOUT WIDE VDOG SP901 VVSSG TEST1 TEST2 CRext SPEAKER TP_TOP CN6006 6P TP_BOT BL_LOW CONTROL BL_HIGH LED (N.C) M 1 REG_GND CN6007 CN6003

PD-205 CN6004 2 TELE KEY CONTROL KEY BLOCK 3 WIDE BOARD LED_GND (SE_GND) 4 S/S BLOCK (SB-9000) 5 SEIDEN_GND (N.C.) LCD DRIVER, 6 SEIDEN_GND BACKLIGHT DRIVE (CF-5100) N

05

DCR-TRV380/TRV480/TRV480E 4-1 4-2 FRAME 4-2. SCHEMATIC DIAGRAMS

Link

CD-472 BOARD (CCD IMAGER) CONTROL KEY BLOCK (SS-5100)

PD-205 BOARD CONTROL KEY BLOCK (PR-5100) (LCD DRIVER, BACKLIGHT DRIVE) SI-041 BOARD (STEADYSHOT, JACK) CONTROL KEY BLOCK (SB-9000) FP-792 FLEXIBLE BOARD FP-228, FP-299, FP-300, FP-301, FP-302, CONTROL KEY BLOCK (CF-5100) FP-802 FLEXIBLE BOARD CONTROL KEY BLOCK (CF-5100)

COMMON NOTE FOR SCHEMATIC DIAGRAMS WAVEFORMS

DCR-TRV380/TRV480/TRV480E 4-2. SCHEMATIC DIAGRAMS

4-2. SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block)

(For schematic diagrams) 1. Connection ¥ All capacitors are in µF unless otherwise noted. pF : µ µF. 50 V or less are not indicated except for electrolytics Pattern box Color bar chart and tantalums. Pattern box PTB-450 For PTB-450: ¥ Chip resistors are 1/10 W unless otherwise noted. J-6082-200-A J-6020-250-A Ω Ω Ω Ω or k =1000 , M =1000 k . Small pattern box For PTB-1450: ¥ Caution when replacing chip parts. PTB-1450 J-6082-559-A New parts must be attached after removal of chip. J-6082-557-A Be careful not to heat the minus side of tantalum L = About 1m(PTB-450) Pattern box capacitor, Because it is damaged by the heat. L = About 40cm(PTB-1450) ¥ Some chip part will be indicated as follows. Example C541 L452 22U 10UH TA A 2520 L Kinds of capacitor External dimensions (mm) Case size ¥ Constants of resistors, capacitors, ICs and etc with XX indicate that they are not used. In such cases, the unused circuits may be indicated. ¥Parts with ★ differ according to the model/destination. Front of the lens Refer to the mount table for each function. ¥ All variable and adjustable resistors have characteristic curve B, unless otherwise noted. ¥ Signal name XEDIT → EDIT PB/XREC → PB/REC ¥ 2: non flammable resistor 2. Adjust the distance so that the output waveform of ¥ 5: fusible resistor Fig. a and the Fig. b can be obtain. ¥ C: panel designation H ¥ A: B+ Line

¥ B: BÐ Line ellow Y Cyan ¥ J : IN/OUT direction of (+,Ð) B LINE. White Magenta Green Red

¥ C: adjustment for repair. Blue ¥ A: not use circuit ¥ Circled numbers refer to waveforms. (Measuring conditions voltage and waveform) ¥Voltages and waveforms are measured between the measurement points and ground when camera shoots AABBA=B color bar chart of pattern box. They are reference values Fig. a (Video output terminal output waveform) and reference waveforms. Ω (VOM of DC 10 M input impedance is used) Electronic beam ¥Voltage values change depending upon input scanning frame impedance of VOM used.) CRT picture frame Precautions for Replacement of CCD Imager ¥ The CD-472 board mounted as a repair part is not equipped with a CCD imager. When replacing this board, remove the CCD imager from the old one and mount it onto the new one. Fig.b (Picture on monitor TV) ¥ If the CCD imager has been replaced, carry out all the adjustments for the camera section. When indicating parts by reference number, please ¥ As the CCD imager may be damaged by static electricity include the board name. from its structure, handle it carefully like for the MOS IC. In addition, ensure that the receiver is not covered with The components identified by mark 0 or dotted line with dusts nor exposed to strong light. mark 0 are critical for safety. Replace only with part number specified.

Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifie.

DCR-TRV380/TRV480/TRV480E 4-5 For Schematic Diagram ¥ Refer to page 4-57 for printed wiring board. 1 2 3 4 55 7 8

Note: IC951 is not included in CD-472 BOARD CD-472 complete board. LND951 A CCD IMAGER C954 XX MARK:NO MOUNT XX NO MARK:REC/PB MODE R:REC MODE P:PB MODE

B IC951 R-7.2 /P0 R-7.2/P0 R-0.3/P0 R-0.3/P0 R11.5/P0 1 2 3 4 5 67 CN951 14P CCD IMAGER IC951 V4 14 V4 V3 V2 V1 NC V3 13 GND 5 ICX219CKA-43: TRV380 /TRV480 1 V2 12 CCD_OUT ICX223CKA-43: TRV480E 2 3 4 V1 11 VC-345 GND 10 (1/18) H2 9 78 9 CN1501 6 C H1 8 RG VL

THROUGH THE SUB NC H1 H2 VDD FP-794 FLEXIBLE RG 7 R969 XX 14 13 12 11 10 9 8 GND PAGE 4-9 6 of LEVEL3 CAM_15V 5 D951 XX /P0 /P0 /P0 R1.3 R1.6 R-7.6 /P0.4 VSHT 4 R12.5

R15.0/P0 C957

CAM-7.5V 3 R10.2/P0.1 XX GND 2

CCD_OUT 1 R970 D 0

R968 XX

C955 0.1u R15/P0

L951 100uH Q951 2SC4178-F13F14-T1 BUFFER R11.5 E /P0 R952 R10.7 C951 C953 C952 82 R953 /P0 47u 22u XX 3300 16V 10V 05

DCR-TRV380/TRV480/TRV480E 4-7 4-8 CD-472 Schematic diagrams of the VC-345 board are not shown. Pages from 4-9 to 4-44 are not shown.

DCR-TRV380/TRV480/TRV480E For Schematic Diagram ¥ Refer to page 4-63 for printed wiring board.

1 2 345 6789 10 1112 1314 15 16 17 18

PD-205 BOARD A LCD DRIVER, BACKLIGHT DRIVE XX MARK:NO MOUNT 4.7

1 IC6002 NO MARK:REC/PB MODE 4.7 2.8V REG 2 IC6002 C6029 1.3 2.8 NJM2867F28(TE2) 0.1u 3 3 45 6.3V 4 CN6001 20P 2 1 Q6006 NDS356AP C6025 FB6002 KEY_AD4 20 XX VDD SWITCH XX 13.4 13.4 B PANEL_13.3V 19 FB6001 R6021 PANEL_4.6V 18 C6016 XX 100k XX REG_GND 17 SO 0.1

VD_SI(HDO) 16 EN XPOFF VST VCK

SI L6001 DWN VD_SO 15 47uH C6030 C6006 XX SCK 0.01u VD_SCK 14 25V XCS VP VC-345 XCS_LCD_DA 13 C6019 C6001 C6002 C6020 XHD 22u 0.1u 1u 3.3u

(18/18) C-SYNC/XHD 12 4V XLED

25V BLDET CN1003 XVD EXTDA PANEL_XVD 11 R6018 C THROUGH THE 6 XX C6014 PD-124 HARNESS PANEL_R 10 4.7u 10V

PAGE 4-44 PANEL_G 9 2.6 of LEVEL3

PANEL_B 8 0.1 1.4 2.5 2.8 1.9 13.4 7 TP_Y 7 36 35 34 33 32 31 30 29 28 27 26 25 CN6004 24P TP_SEL1 6 VP EN 24 TEST1 VSS VST VCK DWN PWM XLED

TP_X 5 VCC3 BLDET FBACK EXTDA 23 COM BL_CONT 4 CL6008 VST 22 VST BL_GND 3 VCK D 21 VCK 24 BL_REG 2 37 VDD 1 NC EN 2.8 20 EN SE_GND 1 C6003 0.01u 6.7 DWN 23 38 BIN COM 19 DWN 1.7 C6004 0.01u 2 13.4 CL6012 18 VDD

39 GIN VCC2 22 1.7 3 17 VSS C6005 0.01u 7 7 D6001

R6047 40 RIN VB 21 8 7 CL6004 VB RD3.3UM-T1B 16 VDOG CN6005 6P 1.7 XX 6 5 LCD901 7.1 3 CL6005 VG 15 VVSSG 4 C6017 (1/2) PANEL_REV 1 41 SCAN VG 20 2 1 1u 14 2.5INCH XVD VR CS COLOR CONTROL PANEL_REV 2 4 8 7 WIDE RB6001 LCD E KEY 42 XVD VR 19 CL6006 13 WIDE N.C. 3 10 UNIT XHD 2.8 IC6001 HST BLOCK 9 12 HST (PR-5100) N.C. 4 43 HD LCD DRIVER GND2 18 REF 2.7 IC6001 11 REF PAGE 4-50 SE_GND 5 C6018 5 CXA3622BR-T4 C6015 0.1u of LEVEL2 44 VCC1 GND1 17 0.1u 10 SOUT 6 16V SE_GND XCS 2.8 0 XPOFF R6023 9 CRext 150k

45 XCS XPOFF 16 HCK2 8 SCK 2.8 HCK2 0.2 WIDE HCK1

46 XSCK WIDE 15 7 HCK1 SI 2.7 0.1 HST 6 PSIG

F 47 SI HST 14 VG 5 SO 0.2 G R6030 470 2.8 VR 13 48 SO VDD 4 R 2.7 VB 3 B RGT 2 RGT 13.4 1 TEST2 R6044 R6022 3900 XWRT/CLKIN RGT HCK1 HCK2 HDO REF OP_OUT OP_IN XCLR Filter2 Filter VSS 10k 1 2 3 4 5 6 7 8 9 10 11 12 7.6 Q6005

R6046 R6045 0 HN1B04FE-Y/GR(TPLR3) CN6006 6P 2.8 1.4 1.4 1.4 1.4 1.3 1.2 G 27k 12k 4 6 REG_GND 1 VP 5 2

CONTROL TELE 2 R6026 7 7.6 KEY XX 3 1 BLOCK WIDE 3 CL6002 7 S/S 4 (SB-9000) C6022 R6019 XX PAGE 4-50 SEIDEN_GND (N.C.) 5 10k of LEVEL2 R6008 6.4 SEIDEN_GND 6 XX CL6011 Q6007 1 3

R6027 HCK1 HCK2 XX RGT REF C6010 5 XX 2 H 560p R6012 10k 1/16W ±0.5% 7 6.4 D6006 XX 6 4 CN6007 6P R6013 100k 13.4 C6009 R6009 1/16W ±0.5% 7 TP_R 1 0.1u 68k Q6004 HN1B04FE-Y/GR(TPLR3) Q6004,6005 TP_L 2 PSIG DRIVE LCD901 N.C. 3 (2/2) TOUCH TP_BOT 4 PANEL TP_TOP 5 EXTDA I N.C. 6

C6027 XX L6002 L6003 R6005 4.7uH 82uH 1800 C6028 1/10W Q6009 R6029 5 UP04111008S0 XX 2200p

1 2.8 2.8 R6028 XX J 1 4 2 6 2.8 2.8 C6011 0.015u 3 2 5 CN6003 10P -0.6 6 3 4 10 10 BL_HIGH 0 -0.6 C6013 9 N.C 2.8 12p 2 1 6 4 8 N.C C6007 3 5 Q6008,6009 2.8 0 4.7u 1 3 T6001 7 N.C TOUCH PANEL 10V INVERTER ND901 I/F 6 3 5.5 5.5 TRANSFORMER 6 N.C 2 5 BACKLIGHT 2 5 4 Q6003 XX 5 N.C K 0 2.8 Q6002 4 N.C CPH5504-TL-E Q6008 1 4 R6011 3 BL_LOW UP04211008S0 INVERTER DRIVE XX 2 LED (N,C)

Q6001 1 LED_GND (SE_GND) XX D6005 D6002 XX XLED D6004 XX MA111-(K8).S0 BLDET

R6001 XX R6010 C6012 R6014 22k 0.1u 470 LND605 L R6002 XX A D6003 XX

05

The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified. par une piéce portant le numéro spécifié. DCR-TRV380/TRV480/TRV480E 4-45 4-46 PD-205 For Schematic Diagram ¥ Refer to page 4-65 for printed wiring board. 1 2 3 4 567 8 9 10 11 12

A FP-792 FLEXIBLE BOARD VIDEO LIGHT Note: D001, D002 and D003 are not included in FP-792 flexible board. D002 NSPW500BS-TL2 REG_GND 1

VL+ 2 B D001 D003 D001-003 NSPW500BS-TL2 NSPW500BS-TL2 (VIDEO LIGHT)

LAND1

STATIC_GND REG_GND 3

STATIC_GND LAND2

C SI-041 BOARD LND757 REG_GND 1 STEADYSHOT, JACK LND754 XX MARK:NO MOUNT VL+ 2 NO MARK:REC/PB MODE LND763 REG_GND 3 Note: CN751, CN752, D753, D754, IC751 and J752 are D not included in SI-041 complete board. R760 XX R759 MIC901 C754 MICROPHONE XX XX 1.3 CN753 4P

2.8 1. 1 INT_MIC_L Vref1 3LIA1 R761 L GND 342.8V XX 2 GND 1 2 3 INT_MIC_R R 4 GND SE751 SE752 PITCH YAW SENSOR SENSOR CN754 36P Vref2 1 2 LIA2 E GND 342.8V 36 VL+ C Y 1.3 1.3 2.8 35 MIC_GND 4 3 C753 S1 S2 XX R762 34 MIC_GND 6 C Y 5 4V C751 C759 XX J751 S S 33 INT_MIC_L XX 4.7u XX CGND YGND S S 32 INT_MIC_R 8 G G 7 C758 C755 VDR757 XX 1 C757 S3 2 S4 4.7u XX XX 31 VREF1 4V FB751 30 LIA1

IC751 XX R754 29 LIA2 F REMOTE COMMANDER RECEIVER 28 VREF2 IC751 D759 RPM7240-V4 SML-512UWT86 27 A_2.8V R751 (TALLY) FB752 R763 26 A_2.8V 1 GND XX 470 2 L 2.8 VCC 3 J752 3 V 25 XF_TALLY_LED 4 BR GND 2 A/V 5 SW 24 D_2.8V 7 R 2.8 R OUT 1 23 XSIRCS_SIG R755 FB753 R752 22 MT_5V D754 56 XX Q751 DAC3825 2SD2114KT146 (IR EMITTER) 21 MT_5V VC-345 G LED DRIVE 1 6 1 6 1 6 20 SIRCS_PWM/IR_DRV_EN (9/18) CN1001 2 5 2 5 2 5 3 R753 19 AV_JACK_IN D753 56 C752 THROUGH THE DAC3825 XX 18 AUDIO_L_I/O 0.2 (IR EMITTER) FP-796 FLEXIBLE 3 4 3 4 3 4 17 AUDIO_R_I/O PAGE 4-25 of LEVEL3 D756 D752 D751 16 REG_GND RSE6.8XN-TR XX RSE6.8XN-TR LND765 15 VIDEO_I/O STATIC_GND 14 REG_GND H 13 S_Y_I/O (N.C.) 12 XS_JACK_IN (N.C.) 11 S_C_I/O (N.C.) 10 REG_GND

9 NTPA 8 TPA D755 1SS357-TPH3 7 REG_GND 6 TPB R756 XX R764 I 10k 5 NTPB 2 1 LF751 4 REG_GND XX 3 4 R765 C756 CN752 7P 10k XX 3 USB_D-

7 GND 5 2 USB_D+ ID 4 R766 1 USB_DET XX D+ 3 (USB) D- 2 6 VCC 1 J

LF752 6 CN751 6P XX 4 8 TPA 4 3 7 NTPA 3 DV 2 6 TPB 2 1 5 K NTPB 1 5 D760 XX 3 4

LND764 2 1 5 STATIC_GND

L

05 DCR-TRV380/TRV480/TRV480E 4-47 4-48 SI-041, FP-792 For Schematic Diagram ¥ Refer to page 4-67 for printed wiring board.

1 2 3 465 78 1 2 345 CONTROL KEY BLOCK A FP-302 A (SS-5100) FLEXIBLE XX MARK:NO MOUNT FP-802 FLEXIBLE CONTROL KEY BLOCK (SS-5100) is replaced as block, BOARD FP-300 so that PRINTED WIRING BOARD is omitted. BOARD VC-345 Q002 TAPE END (18/18) SENSOR FLEXIBLE CN1009 B B PAGE 4-43 BOARD of LEVEL3

Q001 TAPE TOP 1 SENSOR D001 1 TAPE_TOP (C) TAPE LED LND001 XEJECT_SW 2 TAPE_END (C) XS/S_SW REG_GND XMODE_SW XPOWER_SW CHARGE_LED_VDD XCHARGE_LED XCAM_LED XMEM_LED XVTR_LED MODE_LED_VDD D_2.8V ZOOM_VR REG_GND KEY_AD5 XPHOTO_FREEZE STATIC GND 1 2 3 4 5 6 7 8 9 11 14 16 10 12 13 3 TAPE_LED (K) 15 C 4 TAPE_LED (A) C 5 REG_GND 6 S REEL (-) 2 4 FP-301 VC-345 S001 7 S REEL (+) REC (15/18) S003 2 H002 3 8 SENSOR_VCC CN2404 START/STOP FLEXIBLE S REEL PAGE 4-37 PHOTO SENSOR 9 T_REEL (+) of LEVEL3 1 4 1 3 10 T_REEL (-) D002 D001 D004 D003 BOARD 1k 11 HALL_COM S001 POWER/MODE_SW D 12 ME/MP D POWER R001 ME/MP 13 REC_PROOF REC PROOF (CHG) 2 H001 3 14 Hi8_MP OFF S004 REG_GND T REEL Hi8 MP D003 D002 D001 SENSOR 15 C_LOCK_SW 1 4 15 ON XPOWER_SW CHG D004 TAPE

S002 MEMORY C.C. LOCK XMODE_SW S002 MODE PLAY/EDIT (EJECT) E CAMERA E S901 RV001 MODE SWITCH 20k

W (ZOOM) T

05

F 22 DEW 21 M-SW (A) FP-299 20 M-SW (B) 19 M-SW (C) FLEXIBLE 1 18 FG1 MR 2 17 FG VCC 1 2 34 1 2 34 SENSOR BOARD 3 16 FG2 4 15 REG_GND G 14 CAP_U CONTROL KEY BLOCK CONTROL KEY BLOCK 13 CAP_U VC-345 12 CAP_W A A DEW SENSOR (15/18) 11 CAP_W (PR-5100) (SB-9000) CN2403 10 CAP_V PAGE 4-37 XX MARK:NO MOUNT XX MARK:NO MOUNT M902 of LEVEL3 CAPSTAN MOTOR 9 CAP_V CONTROL KEY BLOCK (SB-9000) is replaced as block, CONTROL KEY BLOCK (PR-5100) is replaced as block, so that PRINTED WIRING BOARD is omitted. 8 VH+ so that PRINTED WIRING BOARD is omitted. 7 HU1 FP-228 3 2 H 6 HU2 HE 5 HV1 S003 FLEXIBLE 4 1 S601 4 HV2 B (PANEL REVERSE) B (REC) 3 HW1 (START/STOP) 3 2 LND001 6 SEIDEN_GND BOARD 1 PANEL_REV 2 HW2 HE LND002 5 SEIDEN_GND (N.C.) S002 4 1 1 VH- 2 PANEL_REV PD-205 W LND003 4 S/S 3 N.C PD-205 CN6006 CN6005 PAGE 4-45 LND004 3 WIDE 3 2 4 N.C of LEVEL2 PAGE 4-45 2 TELE (ZOOM) of LEVEL2 LND005 HE 5 SE_GND S001 I 4 1 LND006 1 REG_GND 6 SE_GND T C C 05

05 05

4-50 DCR-TRV380/TRV480/TRV480E 4-49 FP-228, FP-299, FP-300, FP-301, FP-302, FP-802, SS-5100, PR-5100, SB-9000 1 2 3 45678 9 10 1112

CONTROL KEY BLOCK (CF-5100) is replaced as block, CONTROL KEY BLOCK (CF-5100) so that PRINTED WIRING BOARD is omitted. A XX MARK:NO MOUNT S022 S023 R005 S007 R013 R017 R020 R022 S003 R009 S012 S015 EASY (PANEL_O/C_SW) XX 1200 XX 1500 XX 2200 XX 3900 8200 27k

B1 A1 B1 A1 B1 A1 B1 A1 B1 A1 B1 A1 2 1 2 1 2 1 2 1 2 1 2 1

B B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 4 3 B2 A2

D002

EASY

BT001 LITHIUM BATTERY

S016 S020 S004 R006 R010 S011 R014 R018 R023 S019 C S008 BACKLIGHT LIGHT S024 XX 1200 1500 XX 2200 3900 8200 XX XX XX 1 REG_GND 2 N.C B1 A1 B1 A1 B1 A1 B1 A1 B1 A1 B1 2 1 2 1 2 1 1 2 1 2 1 A1 3 LI_3V 2

4 D_2.8V R001 10k B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3A2 5 KEY_AD0

6 BATT_INFO

7 CUSTOM_LED_VDD B1 A1 2 1 S001 D 7 1 2 3 4 5 6 S B 8 N.C A DSPL/ S005 R007 S009 R011 S013 R015 S017 R019 S021 R021 SW2 XCUSTOM_LED_ON BATT INFO XX XX XX XX XX XX XX XX COM 4 3 XX SW1B 9 B2 A2 XX SW1A VC-345 10 REG_GND 11 XMS_LED B1 A1 B1 A1 B1 A1 B1 A1 B1 A1 (18/18) D001 2 1 2 1 2 1 2 1 2 1 CN1007 12 N.C (MS ACCESS) PAGE 4-44 4 of LEVEL3 13 MS_LED_VDD R002 10k B2 4 3 A2 B2 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 14 KEY_AD1

15 D_2.8V R003 XX E 16 KEY_AD3 (N.C.) 17 D_2.8V (N.C.)

18 KEY_AD2 (N.C.) R008 R012 R016 S006 S010 S014 S018 R004 XX XX XX 19 DIAL_A (N.C.) XX XX XX XX XX 20 DIAL_B (N.C.)

21 REG_GND (N.C.) B1 A1 B1 A1 B1 A1 B1 A1 2 1 2 1 2 1 2 1 22 XRESET

B2 4 3A2 B2 4 3 B2 4 3 A2 B2 4 3 A2 B1 A1 A2 F 2 1 S002

4 3 RESET B2 A2

G LND025 CH GND

VC-345 (16/18) 1 SP(+) CN1008 SP901 PAGE 4-39 2 SP(-) SPEAKER of LEVEL3 H

05

DCR-TRV380/TRV480/TRV480E 4-51 4-52 CF-5100 4-3. PRINTED WIRING BOARDS

Link

CD-472 BOARD FP-792 FLEXIBLE BOARD

FP-228, FP-299, FP-300, FP-301, FP-302, PD-205 BOARD FP-228, FP-299, FP-300, FP-301, FP-302, PD-205 BOARD FP-802 FLEXIBLE BOARD

SI-041 BOARD

COMMON NOTE FOR PRINTED WIRING BOARDS WAVEFORMS

MOUNTED PARTS LOCATION CIRCUIT BOARDS LOCATION FLEXIBLE BOARDS LOCATION

Board Name Function CD-472 CCD IMAGER PD-205 LCD DRIVE, BACKLIGHT DRIVE SI-041 STEADYSHOT, JACK

DCR-TRV380/TRV480/TRV480E 4-3. PRINTED WIRING BOARDS

4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS

¥ : Uses unleaded solder. ¥ Chip parts. ¥ : Circuit board Transistor Diode : Flexible board C 6 5 4 4 5 6 5 4 4 5 3 3 3 1 2 3 Pattern from the side which enables seeing. : pattern of the rear side B E 1 2 3 3 2 1 123 3 2 1 2121216 5 4 (The other layers’ patterns are not indicated) ¥ Through hole is omitted. 1 2 2 1 3 2 433 4 6 5 4 4 5 6 ¥ Circled numbers refer to waveforms. ¥ There are a few cases that the part printed on diagram 5 4 3 345 4 1 122 1 1 2 3 3 2 1 isn’t mounted in this model. 3 2 ¥ C: panel designation

4 1

BOARD INFORMATION Parts Location Pattern Board Name (Shown on Page) Total Number of Layers Layers Not Indicated CD-472 Ð 8 layers 2 to 7 layers PD-205 4-79 2 layers Ð SI-041 4-79 2 layers Ð FP-792 Flexible Ð 1 layer Ð FP-228 Flexible Ð 1 layer Ð FP-299 Flexible Ð 1 layer Ð FP-300 Flexible Ð 1 layer Ð FP-301 Flexible Ð 1 layer Ð FP-302 Flexible Ð 1 layer Ð FP-802 Flexible Ð 1 layer Ð

DCR-TRV380/TRV480/TRV480E 4-55 CD-472

Note for Printed Wiring Board (See page 4-55).

: Uses unleaded solder.

CD-472 BOARD 14 13

C953 L951 CN951

R952 C R953

2 B E C952 1 C951 C954 Q951 1 5

1 7

2 3 4 R970 R969 Note: IC951 is not included in LND951 R968 CD-472 complete board.

IC951 D951 C957

C955 7 8

14 8

6 9 1-860-937- 12

05

DCR-TRV380/TRV480/TRV480E 4-57 4-58 CD-472 Printed wiring boards of the VC-345 board are not shown. Pages from 4-59 to 4-62 are not shown.

DCR-TRV380/TRV480/TRV480E PD-205

Note for Printed Wiring Board (See page 4-55).

: Uses unleaded solder.

PD-205 BOARD

L6002

Q6007 C6007 B C E A R6027 1

R6026 + C6019 A C6011 LND605 D6006

C6022 L6003 Q6002 Note: Q6002 and Q6003 have the same mount location. C6005 C6004 C6003 C6001 2 1 5 When you replace, since either Q6002 or Q6003 L6001 3 4 R6030 5 1 Q6003 is used, please refer to schematic diagram and 6 5 4 FB6002 R6005 48 1 2 3 electrical parts list. 37 1 36

4 + + CN6001 3 2 5 1 R6008 C6030 C6020

IC6001 A A C6010 C6009 R6013 8 7 C6006 B R6009 R6012 12 9 25 T6001 13 24 R6018 C6002 FB6001 6 20 R6046 C6025 R6045 R6047 R6044 6 10 5 4 16 IC6002 CN6006 G 123 D 3 1 S Q6006

1 C6029 4 2 C6027 R6029

CL6004 R6021 C6016 R6001 C6013 1 1 CN6005 3 6 4 Q6005 6 4 6 3 6 2 8 1 1 R6028 D6002 4 3 C RB6001 3 R6019 1 7 4 6 CL6012

Q6004 Q6008Q6009 R6023 C6017 C6028 D6004 CL6006 CL6005CL6011 CL6008 C6015 C6018 D6003 D6001 R6022 C6014 1 6 R6002 C6012 CL6002 124 R6010 R6014 Q6001 E C B 1 10

CN6004 CN6007

R6011 CN6003

HF001 D

D6005 1-860-939- 12

05 1 2 3 4 5 DCR-TRV380/TRV480/TRV480E 4-63 4-64 PD-205 SI-041, FP-792 FLEXIBLE

Note for Printed Wiring Board (See page 4-55).

: Uses unleaded solder. D001 D002 (VIDEO LIGHT) (VIDEO LIGHT)

Note: D001, D002 and D003 are not included in FP-792 flexible board.

FP-792 FLEXIBLE BOARD

FP-792 1-860- 929-

1-860-929- 11

D003 (VIDEO LIGHT) 13

2

Note: CN751, CN752, D753, D754, IC751 and J752 are SI-041 BOARD (SIDE A) SI-041 BOARD (SIDE B) not included in SI-041 complete board. 5 7 4 3 LND765

A J752 A A/V LND757 LND763 2 1 E LND754 C Q751 B D753 R759 C754 D753, 754 C752 C757 R762 (IR EMITTER) 5

A 2 4 1 R753 R752 R755 4 3 R751

C751 2 CN751 B C755 B 3 DV R763 SE752 D754 (PITCH) 4 SE751 (YAW) 6 36 3

C758 1 D759

2 1 R761

(TALLY) 3 A A C753 K IC751

R760 1 6 FB751 1

6 C759 R754 1 FB753 4 3

CN754 2 5 8 LF752 3 CN752 1 4 1 6 FB752

C D751 4 C 4

3 5 D752 (USB) 1 6 7 1 2 4 3 D756 R756 R764 LF751 4 3 3 4 5 6 R766 2 135 R765 1 J751 2 7 8 C756 LND764 D755 D760 D 3 1 D VDR757 4 5

4 1

1-860-941- 12 CN753 1-860-941- 12

05 1 2 3 4 05 4 3 2 1 DCR-TRV380/TRV480/TRV480E 4-65 4-66 SI-041, FP-792 FP-228, FP-299, FP-300, FP-301, FP-302, FP-802 FLEXIBLE

Note for Printed Wiring Board (See page 4-55).

: Uses unleaded solder.

FP-300 FLEXIBLE BOARD (COMPONENT SIDE)

Q001 TAPE TOP 1-680-436- SENSOR

1 15

11 15 1 FP-299 FLEXIBLE FP-802 FLEXIBLE BOARD 15 1 BOARD S002 (CONDUCTOR SIDE) C.C. LOCK M902 D001 CAPSTAN S001 TAPE LED MOTOR REC PROOF

1 o' 4 2 3

H001 MR SENSOR T REEL 1 4 SENSOR

DEW SENSOR

11 12 1-677-049-

FP-228 FLEXIBLE 1-680-437- 11 BOARD FP-301 FLEXIBLE BOARD S901 MODE (CONDUCTOR SIDE) SWITCH C 1-680-434- B 11 A COM

H002 FP-302 FLEXIBLE BOARD S REEL 22 SENSOR (CONDUCTOR SIDE)

4 o' 3 1 2 1-689-290- 11 1

Q002 1-680-438- TAPE END SENSOR 11 DCR-TRV380/TRV480/TRV480E 4-67 4-68 FP-228, FP-299, FP-300, FP-301, FP-302, FP-802 CD-472 BOARD

4-4. WAVEFORMS

CD-472 BOARD 1 6

3.6 Vp-p 7.6 Vp-p

VH

IC951 1 REC IC951 qf REC 2 7

22 Vp-p 3.6 Vp-p

V H

IC951 2 REC IC951 qd REC 3 8

2.6 Vp-p 7.6 Vp-p

V 13.5 MHz

IC951 3 REC IC951 qs REC 4 9

22 Vp-p 22 Vp-p

V H

IC951 4 REC IC951 q; REC 5

1.9 Vp-p

H

IC951 7 REC

DCR-TRV380/TRV480/TRV480E 4-69 CD-472 Waveforms of the VC-345 board are not shown. Pages 4-70 to 4-75 are not shown.

DCR-TRV380/TRV480/TRV480E PD-205 BOARD

PD-205 BOARD 1 6

340 mVp-p 5.0 Vp-p

H2H

IC6001 ek REC/PB IC6001 wg REC/PB 2 7

360 mVp-p 7.0 Vp-p

H 2H

IC6001 el REC/PB IC6001 wa REC/PB 3 8

360 mVp-p 7.0 Vp-p

H 2H

IC6001 r; REC/PB IC6001 w; REC/PB 4 9

2.8 Vp-p 7.0 Vp-p

V 2H

IC6001 rs REC/PB IC6001 ql REC/PB 5

2.8 Vp-p

H

IC6001 rd REC/PB

DCR-TRV380/TRV480/TRV480E 4-76 PD-205 Mounted parts location of the VC-345 board is not shown. Pages 4-77 and 4-78 are not shown.

DCR-TRV380/TRV480/TRV480E 4-3. PRINTED WIRING BOARDS

4-5. MOUNTED PARTS LOCATION no mark : side A * mark : side B PD-205 BOARD SI-041 BOARD

C6001 A-2 C758 B-4 C6002 B-2 C759 C-3 C6003 A-3 C6004 A-2 * CN751 B-1 C6005 A-2 * CN752 C-1 C6006 B-3 * CN753 D-4 C6007 A-4 * CN754 C-4 C6009 B-2 C6010 B-2 D751 C-3 C6011 A-5 * D753 B-2 C6012 C-4 * D754 B-2 C6013 C-4 * D755 D-3 C6014 C-3 D756 C-3 C6015 C-2 D759 C-2 C6017 C-2 C6018 C-2 FB751 C-4 C6019 A-3 FB752 C-3 C6020 B-3 FB753 C-2 C6028 C-4 C6029 C-2 * IC751 C-2

CN6001 B-1 * J752 A-1 CN6003 D-4 CN6004 D-2 Q751 A-2 CN6005 C-1 CN6006 C-2 R752 B-2 CN6007 D-3 R753 B-2 R763 B-2 D6001 C-2 * R764 C-3 D6004 C-4 * R765 D-3

IC6001 B-2 SE751 B-3 IC6002 C-2 * SE752 B-3

L6001 A-3 L6002 A-4 L6003 A-4

Q6002 A-5 Q6004 C-2 Q6005 C-2 Q6006 C-3 Q6008 C-3 Q6009 C-3

R6005 B-4 R6009 B-2 R6010 C-4 R6012 B-2 R6013 B-2 R6014 C-4 R6019 C-3 R6021 C-3 R6022 C-2 R6023 C-2 R6030 B-2 R6044 B-2 R6045 B-2 R6046 B-2 RB6001 C-2

T6001 B-4

DCR-TRV380/TRV480/TRV480E 4-79E PD-205, SI-041 NOTE

5. REPAIR PARTS LIST

NOTE: Characters A to L of the electrical parts list indicate location of exploded views in which the desired part is shown. Link EXPLODED VIEWS

ABCD

OVERALL ASSEMBLY FRONT PANEL BLOCK LENS BLOCK LCD BLOCK

EFGH

CABINET R BLOCK EVF BLOCK BATTERY PANEL BLOCK MD FRAME BLOCK

I JKL CASSETTE COMPARTMENT MECHANICAL CHASSIS MECHANICAL CHASSIS ASSEMBLY, DRUM ASSEMBLY LS CHASSIS BLOCK ASSEMBLY BLOCK ASSEMBLY-1 BLOCK ASSEMBLY-2

Link ELECTRICAL PARTS LIST ACCESSORIES

CD-472 BOARD C FP-301 FLEXIBLE BOARD J PD-205 BOARD D

FP-228 FLEXIBLE BOARD K FP-302 FLEXIBLE BOARD J SI-041 BOARD B

FP-299 FLEXIBLE BOARD K FP-792 FLEXIBLE BOARD B

FP-300 FLEXIBLE BOARD J FP-802 FLEXIBLE BOARD J

DCR-TRV380/TRV480/TRV480E 5. REPAIR PARTS LIST

5. REPAIR PARTS LIST

NOTE: ¥ -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. ¥ Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The components identified by mark 0 or ¥The mechanical parts with no reference number in the exploded views are not dotted line with mark 0 are critical for safety. supplied. Replace only with part number specified. ¥ Due to standardization, replacements in the parts list may be different from Les composants identifiés par une marque the parts specified in the diagrams or the components used on the set. 0 sont critiques pour la sécurité. ¥ CAPACITORS: Ne les remplacer que par une pièce portant le numéro spécifié. uF: µF ¥ COILS uH: µH ¥ RESISTORS All resistors are in ohms. METAL: metal-film resistor METAL OXIDE: Metal Oxide-film resistor F: nonflammable ¥ SEMICONDUCTORS In each case, u: µ, for example: uA...: µA... , uPA... , µPA... , uPB... , µPB... , uPC... , µPC... , uPD..., µPD... ¥Abbreviation AUS: Australian model CND : Canadian model NE : North European model

DCR-TRV380/TRV480/TRV480E 5-1 5. REPAIR PARTS LIST

5-1. EXPLODED VIEWS 5-1-1. OVERALL ASSEMBLY ns: not supplied

6 EVF block (See page 5-7.)

2 2 2 2

5 7 11 2 MD frame block 8 (See page 5-9.) Battery panel block (SIZE: (See page 5-8.) 1.5cm X 3.5cm)

2 10 3 2 4 9 Cabinet R block (See page 5-6.)

2

ns

Front panel block 11 (See page 5-3.) 2 2 11 LCD block Lens block (See page 5-5.) (See page 5-4.)

1

Ref. No. Part No. Description Ref. No. Part No. Description 1 X-2024-897-1 CABINET (C (970)) ASSY, P 7 3-087-810-11 LID (51), CPC 2 3-080-203-31 SREW (M2), LOCK ACE, P2 8 COUTION RETAINER (51), EVF FLEXIBLE 3 3-087-813-11 COVER (51), JACK 9 3-079-012-11 SCREW (30), TRIPOD 4 2-548-261-31 SHEET (90), JACK 10 2-580-024-41 LABEL (90) 5 3-087-811-11 CABINET (UPPER) (51) 11 3-080-204-21 SCREW, TAPPING, P2

6 3-078-889-11 SCREW (M1.7)

CAUTION : For the part of 8 : RETAINER (51), EVF FLEXIBLE DCR-TRV380/TRV480/TRV480E (3-088-616-01), cut WOVEN (T0.25), FABRIC NON (3-076-631-01) into the desired length and use it. 5-2 5. REPAIR PARTS LIST

5-1-2. FRONT PANEL BLOCK ns: not supplied 61 60

D001 D002

J752 D003 58 CN751 58 D753 ns D754

CN752 SI-041 IC751

58 53 59 56

55 ns

54 58 ns

62 52

MIC901 Note 1: CN751, CN752, D753, D754, IC751 and J752 are not included in SI-041 complete board. 51 Note 2: D001, D002 and D003 are not included in FP-792 flex- ible board.

Ref. No. Part No. Description Ref. No. Part No. Description 51 3-087-738-31 RETAINER (51), MICROPHONE CN752 1-794-962-11 CONNECTOR, SQUARE TYPE (USB 5P) (USB) 52 3-087-740-31 PLATE (51), MAGNIFICATION (Note 1) 53 X-2024-888-1 PANEL (970) ASSY, FRONT D001 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT) 54 3-087-739-01 PLATE (51), NAME (Note 2) 55 3-087-743-01 SCREW (51), FILTER D002 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT) (Note 2) 56 3-087-742-01 RING (51), FRONT D003 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT) 58 3-080-204-21 SCREW, TAPPING, P2 (Note 2) 59 A-1082-752-A SI-041 BOARD, COMPLETE (Note 1) D753 8-719-078-24 DIODE DAC3825 (IR EMITTER) (Note 1) 60 1-860-929-11 FP-792 FLEXIBLE BOARD (Note 2) 61 3-087-994-01 CUSHION (51), JACK D754 8-719-078-24 DIODE DAC3825 (IR EMITTER) (Note 1) IC751 6-704-975-01 IC RPM7240-V4 (Note 1) 62 3-088-031-01 CUSHION (51), MICROPHONE J752 1-778-040-11 JACK, SMALL TYPE (A/V OUT) (Note 1) CN751 1-794-276-11 CONNECTOR, SQUARE TYPE 4P (DV) (Note 1) MIC901 1-542-513-11 MICROPHONE

DCR-TRV380/TRV480/TRV480E 5-3 5. REPAIR PARTS LIST

5-1-3. LENS BLOCK

104

105 CD-472

103 102

IC951 (Note1, 2)

101

Note 1: IC951 is not included in CD-472 complete board.

Note 2: Be sure to read “Precuations for Replacement of CCD Imager” on page 4-8 when changing the CCD imager.

Ref. No. Part No. Description Ref. No. Part No. Description 101 8-848-765-01 DEVICE, LENS LSV-820A 105 3-080-204-21 SCREW, TAPPING, P2 102 1-758-554-11 FILTER BLOCK, OPTICAL IC951 A-7013-401-A CCD BLOCK ASSY (CCD IMAGER) 103 3-053-973-01 RUBBER (W), SEAL (TRV480E) (Note 1, 2) 104 A-7111-980-A CD-472 BOARD, COMPLETE IC951 A-7016-724-A CCD BLOCK ASSY (CCD IMAGER) (TRV380/TRV480) (Note 1, 2)

DCR-TRV380/TRV480/TRV480E 5-4 5. REPAIR PARTS LIST

5-1-4. LCD BLOCK

157

156

LCD901

ND901

151

152 153

PD-205PD-205 154

155

The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié.

Ref. No. Part No. Description Ref. No. Part No. Description 151 X-2024-898-1 CABINET (M (970)) ASSY, P 156 3-088-536-01 CUSHION (61), LCD 152 3-087-902-01 FRAME (61), PANEL 157 1-479-063-11 KEY BLOCK, CONTROL (SB-9000) 153 A-1081-090-A PD-205 BOARD, COMPLETE LCD901 8-753-052-10 ACX307AKM-1 154 3-080-204-21 SCREW, TAPPING, P2 0ND901 1-518-951-21 TUBE, FLUORESCENT, COLD CATHODE 155 3-078-889-11 SCREW (M1.7)

DCR-TRV380/TRV480/TRV480E 5-5 5. REPAIR PARTS LIST

5-1-5. CABINET R BLOCK ns: not supplied

201 202 (including BT001)

203

211 (SIZE: 0.7cm X 2.8cm) ns (BT001)

%

203 204 205 203

203

206 209 207

208

210 ! : BT001 (BATTERY, LITHIUM SECONDARY) Included in the control switch block (CF-5100).

CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Ref. No. Part No. Description Ref. No. Part No. Description 201 1-478-416-61 KEY BLOCK, CONTROL (CF-5100) 207 3-078-889-11 SCREW (M1.7) (including BT001) 208 1-478-418-11 KEY BLOCK, CONTROL (PR-5100) 202 3-080-206-11 SCREW, TAPPING, P2 209 X-3953-962-1 HINGE (51) ASSY 203 3-080-205-21 SCREW, TAPPING, P2 210 X-2024-894-1 CABINET (R (970)) ASSY 204 1-962-648-11 HARNESS (PD-124) 211 CAUTION TAPE (CF) 205 3-087-826-11 COVER (M) (51), HINGE

206 3-087-825-31 COVER (C) (51), HINGE

CAUTION : For the part of 211 : TAPE (CF) (3-090-115-01), cut DCR-TRV380/TRV480/TRV480E WOVEN (T0.25), FABRIC NON (3-076-631-01) into the desired length and use it. 5-6 5. REPAIR PARTS LIST

5-1-6. EVF BLOCK ns: not supplied

251 253 254

255

252 254

ns ns

LCD902

ns

ns

257 258

Ref. No. Part No. Description Ref. No. Part No. Description 251 X-2025-532-1 CABINET (UPPER (955)) ASSY, EVF 258 1-860-928-12 FP-797 FLEXIBLE BOARD 252 X-3951-166-1 LENS (M) ASSY, VF LCD902 1-805-465-61 INDICATOR MODULE LIQUID CRYSTAL 253 X-2025-533-1 CABINET (LOWER (905)) ASSY, EVF (TRV380/TRV480) 254 3-080-204-21 SCREW, TAPPING, P2 LCD902 1-805-465-81 INDICATOR MODULE LIQUID CRYSTAL 255 X-2048-474-1 BASE (910) ASSY, SLIDE (TRV480E) 257 3-080-203-31 SCREW (M2), LOCK ACE, P2

DCR-TRV380/TRV480/TRV480E 5-7 5. REPAIR PARTS LIST

5-1-7. BATTERY PANEL BLOCK ns: not supplied

ns

303 304

BT901 301 305

ns 302 302 302 302

306

307

Ref. No. Part No. Description Ref. No. Part No. Description 301 3-087-799-01 SHEET METAL (LOWER) (51), STRAP 305 1-816-271-21 MEMORY STICK CONNECTOR 10P 302 3-078-889-11 SCREW (M1.7) 306 1-860-931-11 FP-799 FLEXIBLE BOARD 303 X-2024-900-1 PANEL (970) ASSY, BATTERY 307 2-583-929-01 SHEET (970), MS SHIELD 304 3-072-305-11 LID (2500), JACK BT901 1-694-772-11 TERMINAL BOARD, BATTERY

DCR-TRV380/TRV480/TRV480E 5-8 5. REPAIR PARTS LIST

5-1-8. MD FRAME BLOCK ns: not supplied 365

366

351

352 ns 367 364

ns 363 353 ns 362

354 365 Mechanism deck block (See page 5-10 to 5-13.) ns

355 355 355

356

355 361 355 VC-345 357

359 360 358

Ref. No. Part No. Description Ref. No. Part No. Description 351 1-478-417-81 KEY BLOCK, CONTROL (SS-5100) 360 1-860-930-11 FP-794 FLEXIBLE BOARD 352 3-080-253-01 SCREW (M1.7), LOCK ACE, P2 361 3-089-368-01 LABEL, FUSE REPLACEMENT (51) 353 X-3953-958-2 FRAME (51) ASSY, CS (TRV380/TRV480) 354 3-080-204-21 SCREW, TAPPING, P2 362 X-2048-472-1 CABINET (L (910)) ASSY 355 3-078-889-11 SCREW (M1.7) 363 3-978-765-01 SLIDER, G LOCK 364 3-087-802-01 BELT (51), GRIP 356 3-066-169-01 SHEET (30), MD 357 3-087-809-02 FRAME (51), MD 365 3-080-203-31 SREW (M2), LOCK ACE, P2 358 1-860-927-11 FP-796 FLEXIBLE BOARD 366 2-548-267-31 LABEL (L (95)) (TRV380) 359 A-1093-414-A VC-345 BOARD, COMPLETE (SERVICE) 366 2-548-267-41 LABEL (L (95)) (TRV480) (TRV380) 366 2-548-267-51 LABEL (L (95)) (TRV480E) 359 A-1093-415-A VC-345 BOARD, COMPLETE (SERVICE) 367 3-080-204-11 SCREW, TAPPING, P2 (TRV480/TRV480E)

DCR-TRV380/TRV480/TRV480E 5-9 5. REPAIR PARTS LIST

5-1-9. CASSETTE COMPARTMENT ASSEMBLY, DRUM ASSEMBLY ns: not supplied 701 702 701

703 705

704 706 707 708 LS chassis block M901 assembly (See page 5-11.) 709

712

711

Mechanical chassis block assembly (See page 5-12 to 5-13.) 710

Ref. No. Part No. Description Ref. No. Part No. Description 701 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 708 3-065-935-01 HLC CUT 1.8X4X0.5 702 3-065-895-01 LEVER, REEL RELEASE 709 3-947-503-01 SCREW (M1.4) 703 3-065-896-01 PLATE, BLIND 710 X-3951-299-1 SCREW ASSY, DRUM FITTING 704 X-3951-298-1 CASSETTE COMPARTMENT ASSY 711 3-074-309-01 ROLLER A, LS GUIDE 705 X-3951-302-1 DAMPER ASSY 712 7-624-101-04 STOP RING 1.2 (E TYPE)

706 X-3951-297-1 GEAR ASSY, R DRIVE M901 A-7048-986-A DRUM (DKH-04B-R) (SERVICE) 707 3-065-840-01 CUT (0.98X3X0.13), LUMILER (W)

DCR-TRV380/TRV480/TRV480E 5-10 5. REPAIR PARTS LIST

5-1-10. LS CHASSIS BLOCK ASSEMBLY 767 759 S001 ns: not supplied 760 764

757 758 766 768 763 765 769

762 761 770 756 771

755 772 781 775 752 778 780 S002 Q001 776 H001 779 774

FP-802 H002 ns 773 Q002 777 FP-301 ns D001

FP-300 FP-302 ns ns

ns

754 753

752

783 751 Ref. No. Part No. Description Ref. No. Part No. Description 751 3-065-822-02 RAIL (S), GUIDE 771 3-065-830-01 SPRING, S RATCHET 752 3-947-503-01 SCREW (M1.4) 772 X-3951-288-1 TABLE (T) ASSY, REEL 753 A-7096-416-B BASE (S) BLOCK ASSY, GUIDE 773 3-065-819-01 SPRING, TG1 ARM 754 A-7096-415-A BASE (T) BLOCK ASSY, GUIDE 774 3-065-821-01 RAIL (T), GUIDE 755 A-7096-426-A CHASSIS ASSY, LS 775 X-3951-289-1 TABLE (S) ASSY, REEL

756 3-065-802-01 SPRING, TG7 ARM 776 3-065-833-01 GUIDE, LOCK 757 A-7096-414-A ARM BLOCK ASSY, TG7 777 3-065-831-01 PLATE (SPR), RE RETURN 758 3-065-801-01 RETAINER, TG7 778 X-3951-304-1 ARM ASSY, TG1 759 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 779 3-065-835-01 GUIDE (S), CASSETTE 760 X-3951-303-1 ARM ASSY, PINCH 780 3-065-820-01 SPRING, RVS ARM

761 3-065-823-01 ARM, T RATCHET 781 X-3951-296-1 BAND (ASSY), BT 762 3-065-794-01 ROAD (SPR), PINCH ARM 783 3-067-167-01 SCREW (M1.4X2), CAMERA TAPPING 763 3-065-792-01 ROLLER, P LIM ARM D001 8-719-988-42 DIODE GL453 (TAPE LED) 764 3-065-834-01 GUIDE (T), CASSETTE H001 8-719-033-37 ELEMENT, HALL HW-105C (T REEL) 765 3-065-824-01 SPRING, T RATCHET H002 8-719-033-37 ELEMENT, HALL HW-105C (S REEL)

766 A-7096-417-A SOFT ASSY, T Q001 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE TOP) 767 3-071-650-01 SCREW (M1.7) (S) Q002 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE END) 768 3-065-832-01 PLATE, LS CAM S001 1-692-614-11 SWITCH, PUSH (3 KEY) (REC PROOF) 769 3-065-828-01 ARM, S RATCHET S002 1-572-688-11 SWITCH, PUSH LEVER (1 KEY) (C. C. LOCK) 770 3-065-829-01 PLATE, S RATCHET (RE)

DCR-TRV380/TRV480/TRV480E 5-11 5. REPAIR PARTS LIST

5-1-11. MECHANICAL CHASSIS BLOCK ASSEMBLY-1 ns: not supplied

S901 815 811 819 805 824 ns 815 805 817 810 809 814 802

807 813 M902 812 815 802

821 M903 820 822 806 823

802 808 818 804

803 Mechanical chassis block assembly-2 (See page 5-13.)

801

Ref. No. Part No. Description Ref. No. Part No. Description 801 A-7096-422-A BASE ASSY, DRUM 814 3-065-881-01 SPRING, P PRESSURE PLATE 802 3-947-503-01 SCREW (M1.4) 815 3-065-934-01 HLW CUT 0.98X3X0.25 803 3-065-928-01 SPACER, GROUND 817 3-065-898-01 SPRING, EJECT ARM 804 3-065-927-01 GROUND, DRUM 818 3-065-870-01 ROLLER, LS GUIDE 805 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 819 A-7096-421-A ARM ASSY, HCL

806 3-067-154-01 SPRING, CAPSTAN 820 3-065-918-01 GEAR (2), CAM RELAY 807 3-065-931-01 RAIL (T2), GUIDE 821 A-7096-419-A GEAR ASSY, CHANGE 808 X-3947-398-1 SCREW ASSY, M1.7 PW 822 3-065-902-01 BELT, TIMING 809 3-065-933-01 PAN (2 MAIN 1.4X4.5), CAMERA 823 3-065-905-01 GEAR, RELAY 810 1-677-049-11 FP-228 FLEXIBLE BOARD (DEW SENSOR) 824 3-065-882-01 ARM, EJECT

811 1-680-434-11 FP-299 FLEXIBLE BOARD M902 8-835-701-01 MOTOR, DC SCE13A/C-NP (CAPSTAN) 812 3-065-877-01 PLATE (T), GUIDE LOCK M903 A-7096-420-A MOTOR ASSY, LD (LOADING) 813 X-3951-301-1 PLATE ASSY, PINCH PRESSURE S901 1-786-096-11 SWITCH, ROTARY (MODE SWITCH)

DCR-TRV380/TRV480/TRV480E 5-12 5. REPAIR PARTS LIST

5-1-12. MECHANICAL CHASSIS BLOCK ASSEMBLY-2

860 863

861 859 862 857 864 858

865

856

855 853 866 854 852 851 867

868

Ref. No. Part No. Description Ref. No. Part No. Description 851 3-065-920-01 ARM, HC DRIVE 860 7-624-101-04 STOP RING 1.2 (E TYPE) 852 3-065-913-01 GEAR (4), LD 861 A-7096-412-A GEAR (T) ASSY, GUIDE 853 3-065-914-01 SHEET, COVER 862 X-3951-307-1 PLATE ASSY, M SLIDE 854 3-065-917-01 GEAR (1), CAM RELAY 863 X-3951-305-1 ARM ASSY, LS 855 3-065-934-01 HLW CUT 0.98X3X0.25 864 3-065-901-01 ROLLER, LS ARM

856 3-065-915-01 GEAR (1), CAM 865 3-065-916-01 GEAR (2), CAM 857 3-065-878-01 PLATE (S), GUIDE LOCK 866 3-065-919-01 ARM, T1 LIMITTER 858 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 867 X-3951-308-1 ARM ASSY, GL 859 A-7096-413-A GEAR (S) ASSY, GUIDE 868 X-3951-300-2 CHASSIS ASSY, MECHANICAL

DCR-TRV380/TRV480/TRV480E 5-13 CD-472 FP-228 FP-299 FP-300 FP-301 FP-302 FP-792 FP-802 PD-205 5-2. ELECTRICAL PARTS LIST Ref. No. Part No. Description Ref. No. Part No. Description A-7111-980-A CD-472 BOARD, COMPLETE (Not supplied) FP-302 FLEXIBLE BOARD (Note 2) *********************** ******************** (IC951 is not included in this complete board.) < PHOTO TRANSISTOR > < CAPACITOR > Q002 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE END) C951 1-126-395-11 ELECT CHIP 22uF 20% 16V C953 1-128-994-21 ELECT CHIP 47uF 20% 10V C955 1-164-360-11 CERAMIC CHIP 0.1uF 16V 1-860-929-11 FP-792 FLEXIBLE BOARD ******************** < CONNECTOR > (D001, D002 and D003 are not included in this flexible board.) CN951 1-815-762-11 CONNECTOR, FFC/FPC 14P < DIODE > < IC > D001 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT) IC951 A-7013-401-A CCD BLOCK ASSY (CCD IMAGER) (Note 1) D002 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT) (TRV480E) D003 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT) IC951 A-7016-724-A CCD BLOCK ASSY (CCD IMAGER) (Note 1) (TRV380/TRV480) (Not supplied) FP-802 FLEXIBLE BOARD (Note 2) < COIL > ********************

L951 1-469-528-91 INDUCTOR 100uH < HOLE ELEMENT >

< TRANSISTOR > H001 8-719-033-37 ELEMENT, HALL HW-105C (T REEL) H002 8-719-033-37 ELEMENT, HALL HW-105C (S REEL) Q951 8-729-117-73 TRANSISTOR 2SC4178-F14 < SWITCH > < RESISTOR > S001 1-692-614-11 SWITCH, PUSH (3 KEY) (REC PROOF) R952 1-218-940-11 RES-CHIP 82 5% 1/16W S002 1-572-688-11 SWITCH, PUSH LEVER (1KEY) (C.C. LOCK) R953 1-218-959-11 RES-CHIP 3.3K 5% 1/16W R970 1-216-864-11 SHORT CHIP 0 A-1081-090-A PD-205 BOARD, COMPLETE ********************** 1-677-049-11 FP-228 FLEXIBLE BOARD (DEW SENSOR) ******************** < CAPACITOR >

C6001 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C6002 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V 1-680-434-11 FP-299 FLEXIBLE BOARD C6003 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V ******************** C6004 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V (S901 is not included in this flexible board.) C6005 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V

< SWITCH > C6006 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C6007 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V S901 1-786-096-11 SWITCH, ROTARY (MODE SWITCH) C6009 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C6010 1-164-739-11 CERAMIC CHIP 560PF 5% 50V C6011 1-164-657-11 CERAMIC CHIP 0.015uF 10% 50V (Not supplied) FP-300 FLEXIBLE BOARD (Note 2) ******************** C6012 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C6013 1-100-371-11 CERAMIC CHIP 12PF 5% 3.15KV < PHOTO TRANSISTOR > C6014 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V C6015 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V Q001 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE TOP) C6017 1-165-908-11 CERAMIC CHIP 1uF 10% 10V

C6018 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V (Not supplied) FP-301 FLEXIBLE BOARD (Note 2) C6019 1-104-847-11 TANTAL. CHIP 22uF 20% 4V ******************** C6020 1-100-502-11 TANTAL. CHIP 3.3uF 20% 25V C6028 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V < DIODE > C6029 1-100-252-11 CERAMIC CHIP 0.1uF 10% 6.3V

D001 8-719-988-42 DIODE GL453S (TAPE LED)

Note 1: Be sure to read “Precautions for Replacement of CCD Imager” on page 4-5 when changing the CCD imager.

Note 2: FP-300, FP-301, FP-302 and FP-802 flexible DCR-TRV380/TRV480/TRV480E boards are included in CHASSIS ASSY, LS (A- 5-14 7096-426-A). PD-205 SI-041

Ref. No. Part No. Description Ref. No. Part No. Description < CONNECTOR > A-1082-752-A SI-041 BOARD, COMPLETE ******************** CN6001 1-794-997-11 PIN, CONNECTOR 20P (CN751, CN752, D753, D754, IC751 and J752 CN6003 1-764-709-11 CONNECTOR, FFC/FPC (LIF) 10P are not included in this complete board.) CN6004 1-815-031-11 CONNECTOR, FFC/FPC (ZIF) 24P CN6005 1-816-176-11 CONNECTOR, FFC/FPC (ZIF) 6P < CAPACITOR > CN6006 1-691-370-11 CONNECTOR, FFC/FPC 6P C758 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V CN6007 1-816-176-11 CONNECTOR, FFC/FPC (ZIF) 6P C759 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V

< DIODE > < CONNECTOR >

D6001 8-719-050-42 DIODE RD3.3UM-T1B CN751 1-794-276-11 CONNECTOR, SQUARE TYPE 4P (DV) D6004 8-719-073-01 DIODE MA111-(K8).S0 CN752 1-794-962-11 CONNECTOR, SQUARE TYPE (USB 5P) (USB) CN753 1-816-232-11 PIN, CONNECTOR (PC BOARD) 4P < IC > CN754 1-818-074-11 CONNECTOR, FFC/FPC (ZIF) 36P

IC6001 8-752-115-66 IC CXA3622BR-T4 < DIODE > IC6002 6-706-717-01 IC NJM2867F28 (TE2) D751 6-500-044-01 DIODE DF6A6.8FU (TE85R) < COIL > D753 8-719-078-24 DIODE DAC3825 (IR EMITTER) D754 8-719-078-24 DIODE DAC3825 (IR EMITTER) L6001 1-469-527-91 INDUCTOR 47uH D755 8-719-027-76 DIODE 1SS357-TPH3 L6002 1-412-056-11 INDUCTOR 4.7uH D756 6-500-044-01 DIODE DF6A6.8FU (TE85R) L6003 1-428-878-11 INDUCTOR 82uH D759 6-500-817-01 DIODE SML-512UWT86 (TALLY) < TRANSISTOR > < FERRITE BEAD > Q6002 6-550-065-01 TRANSISTOR CPH5504-TL-E Q6004 8-729-054-48 TRANSISTOR UP04601008S0 FB751 1-414-760-21 INDUCTOR, FERRITE BEAD Q6005 8-729-054-48 TRANSISTOR UP04601008S0 FB752 1-414-760-21 BEAD, FERRITE (CHIP) (1608) Q6006 8-729-041-23 TRANSISTOR NDS356AP FB753 1-414-760-21 BEAD, FERRITE (CHIP) (1608) Q6008 8-729-054-89 TRANSISTOR UP04211008S0 < IC > Q6009 8-729-054-44 TRANSISTOR UP04111008S0 IC751 6-704-975-01 IC RPM7240-V4 < RESISTOR > < JACK > R6005 1-216-824-11 METAL CHIP 1.8K 5% 1/10W R6009 1-218-975-11 RES-CHIP 68K 5% 1/16W J752 1-778-040-11 JACK, SMALL TYPE (A/V) R6010 1-218-969-11 RES-CHIP 22K 5% 1/16W R6012 1-208-911-11 METAL CHIP 10K 0.5% 1/16W < TRANSISTOR > R6013 1-208-935-11 METAL CHIP 100K 0.5% 1/16W Q751 8-729-023-22 TRANSISTOR 2SD2114K R6014 1-218-949-11 RES-CHIP 470 5% 1/16W R6019 1-218-965-11 RES-CHIP 10K 5% 1/16W < RESISTOR > R6021 1-218-977-11 RES-CHIP 100K 5% 1/16W R6022 1-218-965-11 RES-CHIP 10K 5% 1/16W R752 1-216-806-11 METAL CHIP 56 5% 1/10W R6023 1-216-847-11 METAL CHIP 150K 5% 1/10W R753 1-216-806-11 METAL CHIP 56 5% 1/10W R763 1-216-817-11 METAL CHIP 470 5% 1/10W R6030 1-218-949-11 RES-CHIP 470 5% 1/16W R764 1-216-833-11 METAL CHIP 10K 5% 1/10W R6044 1-218-960-11 RES-CHIP 3.9K 5% 1/16W R765 1-216-833-11 METAL CHIP 10K 5% 1/10W R6045 1-218-966-11 RES-CHIP 12K 5% 1/16W R6046 1-218-970-11 RES-CHIP 27K 5% 1/16W < SENSOR >

< COMPOSITION CIRCUIT BLOCK > SE751 1-476-807-41 SENSOR, ANGULAR VELOCITY (YAW) SE752 1-476-807-31 SENSOR, ANGULAR VELOCITY (PITCH) RB6001 1-234-369-21 RES, NETWORK 10 (1005 x4)

< TRANSFORMER > Electrical parts list of the VC-345 board is 0T6001 1-435-786-31 TRANSFORMER, INVERTER not shown. Pages 5-16 to 5-24 are not shown.

The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. DCR-TRV380/TRV480/TRV480E Replace only with part num- Ne les remplacer que par une pièce 5-15 ber specified. portant le numéro spécifié. Checking supplied accessories.

Power cord (1) 0 1-696-819-22 (AUS) Rechargeable battery pack AC-L15A/L15B AC Adaptor (1) 0 1-769-608-11 (AEP, NE, E) NP-FM30 (1) 0 1-477-533-51 0 1-783-374-11 (UK) 0 A-7096-387-A (US, CND) 0 1-790-542-12 (US, CND, PL) 0 A-7096-388-B (EXCEPT US, CND)

Lens cap (1) X-3952-971-1

Battery holder Shoulder strap (1) A/V connecting cable (1) 3-083-973-01 3-987-015-02 1-824-097-41 Wireless Remote Commander Cap string (1) RMT-831 (1) 3-979-194-12 1-477-898-41

Other accessories 2-515-263-11 MANUAL, INSTRUCTION (ENGLISH) (TRV480E: AEP, UK, E, AUS) 2-515-263-21 MANUAL, INSTRUCTION (FRENCH) (TRV480E: AEP, E) 2-515-263-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (TRV480E: AEP) 2-515-263-41 MANUAL, INSTRUCTION (ITALIAN, GREEK) USB cable (1) (TRV480E: AEP) 1-829-868-31 Conversion 2P adaptor (1) 2-515-263-51 MANUAL, INSTRUCTION (GERMAN, DUTCH) 0 1-569-008-12 (TRV380/TRV480: E) (TRV480E: AEP)

2-515-263-61 MANUAL, INSTRUCTION (SWEDISH, RUSSIAN) (TRV480E: NE) 2-515-263-71 MANUAL, INSTRUCTION (DANISH, FINNISH) (TRV480E: NE) 2-515-263-81 MANUAL, INSTRUCTION (ARABIC, PERSIAN) (TRV480E: E) 2-515-263-91 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE) (TRV480E: E) 2-515-265-11 MANUAL, INSTRUCTION (THAI) (TRV480E: E)

2-515-268-11 MANUAL, INSTRUCTION (ENGLISH) (TRV480: US, CND, E) 2-515-268-21 MANUAL, INSTRUCTION (FRENCH) CD-ROM (TRV480: CND) (SPVD-012 2005) (USB Driver) 2-515-268-31 MANUAL, INSTRUCTION (SPANISH) (TRV380: E) (Picture Package Ver.1.5) (1) 2-515-268-41 MANUAL, INSTRUCTION (PORTUGUESE) 2-515-350-01 (TRV380: E)

The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié.

DCR-TRV380/TRV480/TRV480E 5-25E [Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)]

Toolbar

Printing a text Reversing the screens displayed once 1. Click the Print button . ¥To reverse the previous screens (operation) one by one, click 2. Specify a printer, print range, number of copies, and other op- the . tions, and then click [OK]. ¥To advance the reversed screens (operation) one by one, click the . Application of printing: To set a range to be printed within a page, select the graphic Application to the Service Manual: selection tool and drag on the page to enclose a range to This function allows you to go and back between circuit dia- be printed, and then click the Print button. gram and printed circuit board diagram, and accordingly it will be convenient for the voltage check.

Finding a text 1. Click the Find button . Moving with link 2. Enter a character string to be found into a text box, and click the [Find]. (Specify the find options as necessary) 1. Select either palm tool , zoom tool , text selection tool , or graphic selection tool . Application to the Service Manual: 2. Place the pointer in the position in a text where the link exists To execute “find” from current page toward the previous pages, (such as a button on cover and the table of contents page, or select the check box “Find Backward” and then click the blue characters on the removal flowchart page or drawing “Find”. page), and the pointer will change to the forefinger form . 3. Then, click the link. (You will go to the link destination.)

Moving with bookmark: Click an item (text) on the bookmark pallet, and you can move to the link destination. Also, clicking can display the hidden items. (To go back to original state, click ) 3. Open the find dialog box again, and click the [Find Again] and you can find the matched character strings displayed next. (Character strings entered previously are displayed as they are in the text box.)

Application to the Service Manual: The parts on the drawing pages (block diagrams, circuit dia- grams, printed circuit boards) and parts list pages in a text can be found using this find function. For example, find a Ref. No. of IC on the block diagram, and click the [Find Again] continuously, so that you can move to the Ref. No. of IC on Zooming or rotating the screen display the circuit diagram or printed circuit board diagram succes- “Zoom in/out” sively. ¥ Click the triangle button in the zoom control box to select the Note: The find function may not be applied to the Service display magnification. Or, you may click or for zoom- Manual depending on the date of issue. ing in or out.

Switching a page ¥To move to the first page, click the . ¥To move to the last page, click the . “Rotate” ¥To move to the previous page, click the . ¥ Click rotate tool , and the page then rotates 90 degrees each. ¥To move to the next page, click the . Application to the Service Manual: The printed circuit board diagram you see now can be changed to the same direction as the set. Reverse 987678131.pdf Revision History

S.M. Rev. Ver. Date History Contents issued 1.0 2004.11 Official Release — —

DCR-TRV380/TRV480/TRV480E