VALUE + • European Engineering and Design • Supplied with Nationally Traceable Calibration Certificates • 12 + 12 Care Warranty Program

Home , Height gauge

VALUE + • European Engineering and Design • Supplied with nationally traceable calibration certificates • 12 + 12 Care Warranty Program

THE BEST OFPRECISION BOTH BRANDS TOOL SALE WEGUARANTEETOMATCHALL COMPETITORSPRICES

Distributed by: Wells Industrial Supplies Ltd Supplying Professional Products to the Customers that expect the Best

Pricing valid while quantities last or until further notice

Proudly Supporting the Canadian Metalworking Industry since 1960 VALUE + • European Engineering and Design • Supplied with nationally traceable calibration certificates • 12 + 12 Care Warranty Program

Asimeto Precision Tools were designed with you in mind. In the quest to meet your precision measurement needs, and to provide excellent price to performance value, our design team has enlisted the craftsmanship of European designers to give our tools a modern look and a great feel.

Furthermore, our tools conform to national and federal specifications, and come standard with calibration certificates, so you can be sure that your Asimeto tools are ready to perform.

If innovative design, great value, and superior quality are important to you, then choose Asimeto Precision Tools as your Please call for your complete Asimeto measurement partner. catalogue today #ASMT009

® Calibration Lab Report • European Engineering and Design • Supplied with nationally traceable calibration certificates ® Value + • 12 + 12 Care Warranty Program

67 IP COOLANT PROOF CALIPER features: IP IP 67 65 • Range: 0-6”/0-150mm SPC OUTPUT • Resolution: .0005”/0.01mm • Accuracy: ± .001”

SALE Range Resolution Accuracy Code No. Price $ 0-6” / 0-150mm .0005” / 0.01mm ±.001” 286-560 144.00

DIGIMATIC CALIPERS DIAL CALIPERS

features: • Extras large LCD readout features: • Inch - Metric conversion • .100” Range Per Rev. • Hardened stainless steel

SALE SALE Range Resolution Accuracy Code No. Price $ Range Resolution Accuracy Code No. Price $ 0-6” / 0-150mm .0005” / 0.01mm ±.001” 286-500 57.96 0-6” .001” ±.001” 286-834 59.31 0-8” / 0-200mm .0005” / 0.01mm ±.001” 286-502 105.75 0-8” .001” ±.0015” 286-838 86.49 0-12” / 0-300mm .0005” / 0.01mm ±.0015” 286-504 183.87 0-8” .001” ±.0015” 286-842 136.62

VERNIER CALIPERS

features: • Can measure OD, ID, depth and steps • Available in Plain, Thumb Clamp and Fine adjustment. • Stainless Steel

Range Vernier Resolution SALE Lower Scale Upper Scale Lower Scale Upper Scale Accuracy Code No. Price $ Plain Vernier 0-150mm 0-6” .05mm 1/128” ±0.06mm 286-902 53.73 0-150mm 0-6” .02mm .001” ±0.03mm 286-908 46.26 0-200mm 0-8” .02mm .001” ±0.03mm 286-910 85.32 Thumb Clamp 0-150mm 0-6” 0.02mm .001” ±0.03mm 286-938 58.23 0-200mm 0-8” 0.02mm .001” ±0.03mm 286-940 92.88

81 PC GAGE BLOCK SET features: • Individual serial numbers • Calibration Cert to N.I.S.T • Deluxe fitted wooden case • Mirror polished surface

Blocks Blocks SALE Per Set Included Grade Code No. Price $ 1 Block: 0.050” 10 Blocks: 0.1000”-0.1009” x 0.0001” steps 81 49 Blocks: 0.101”-0.149” x 0.001” steps 2 (B) 287-224 284.40 17 Blocks: 0.150”-0.950” x 0.050” steps 4 Blocks: 1.000”-4.000” x 1.000” steps 3 • European Engineering and Design • Supplied with nationally traceable calibration certificates ® Value + • 12 + 12 Care Warranty Program

DIAL TEST INDICATORS features: DIGIMATIC INDICATORS • Jeweled bearings • Inch units come with 5/32 & 3/8 dovetail stems features: • Metric unit comes with 6mm & 8mm dovetail stems • Lug Back (attached) / Flat Back supplied • Easy to read yellow face • Tolerance measurement feature • Inch/Metric conversion • SR44 (silver oxide cell) battery

SALE Range Resolution Accuracy Code No. Price $ Dial SALE 0-1” / 0-25mm .0005” / 0.01mm ±.0012” / ±0.03 286-612 220.23 Range Resolution Reading Accuracy Code No. Price $ .008” .0001” 0-4-0 ±.0001” 287-150 102.69 .03” .0005” 0-15-0 ±.0005” 287-154 79.29 DIAL INDICATORS SERIES 1 features: • Range Per Rev. .1” DIAL INDICATORS SERIES 2 • Stem Dia. 3/8 • Dial face dia. 1.65” features: • Lug Back • Jeweled bearings • Range Per Rev. .1” for .5 & 1” • Range Per Rev. .01” for .05” • Stem Dia. 3/8 • Dial face dia. 2.20” • Lug Back • Easy to read dial face Dial SALE Range Grad. Reading Code No. Price $ 0-.25” .001” 0-100 286-700 43.38 0-.25” 0-50-0 0-100 286-702 43.38

Dial SALE Range Grad. Reading Code No. Price $ 0-.5” .0005” 0-50 286-714 35.82 0-.5” .001” 0-100 286-718 35.82 DIAL/DIGITAL HEIGHT GAUGE 0-1” .001” 0-100 286-722 35.82 0-.05” .0001” 0-5-0 286-725 90.99 features: 0-.05” .0001” 10-0 286-727 90.99 • Dial & digital counter reading • Hand wheel for easier travel • Carbide tipped scriber

Dial Digital Counter SALE Range Graduation Graduation Accuracy Code No. Price $ 0-18” .001” .1”(Dual Reading) ±.002 287-102 476.01 MAGNETIC STANDS features: • For Indicators with 3/8 stems and or Lug backs with 1/4 hole dia. • On/Off switch • 132 lbf Magnetic pull

Pull SALE Model Action Code No. Price $ 6” Rod and Universal Clamp 132 lbf 287-200 28.89 6” Adjustable Rod / Fine Adjustment 132 lbf 287-202 30.42

4 • European Engineering and Design • Supplied with nationally traceable calibration certificates ® Value + • 12 + 12 Care Warranty Program

OUTSIDE MIC. .0001” RATCHET STOP OUTSIDE MICROMETER SETS

features: • Ratchet stop • Locking clamp • Carbide Faces • Satin Chrome finish

SALE Range Graduation Accuracy Code No. Price $ SALE Range Graduation Code No. Price $ 0-1” .0001” ±.0001” 285-100 34.83 0-3” (3 pc set) .0001” 285-150 118.26 1-2” .0001” ±.0001” 285-102 37.62 0-4” (4 pc set) .0001” 285-152 162.18 2-3” .0001” ±.0001” 285-104 41.40 0-6” (6 pc set) .0001” 285-154 272.79 3-4” .0001” ±.00015” 285-106 44.82 0-6” (6 pc set) .001” 285-254 267.30

DIGIMATIC MIC HEAD RATCHET STOP DEPTH MICROMETER

features: • Accuracy +.00015” features: • .157 Dia. interchangeable rod lengths can be adjusted after IP • Accuracy: + .0001” wear on the measuring tip 65 SPC OUTPUT • On/Off Sensor • Ratchet Stop • Extra large LCD readout • Statin Chrome finish throughout • Measurement hold button • Carbide Face • Inch - Metric conversion

SALE Base SALE Range Resolution Code No. Price $ Range Graduation Length Code No. Price $ 0-1” / 0-25mm .00005” / 0.001mm 285-090 249.75 0-6” .001” 4.0” 285-858 203.76

DIGIMATIC OUTSIDE MICROMETERS

features: • On/Off Sensor • Extra large LCD readout • Carbide Faces IP 65 SPC OUTPUT • Inch - Metric conversion

Inch Inch Metric Metric SALE Range Accuracy Range Accuracy Thimble Type SPC Code No. Price $ 0-1 .0001 0-25 .004 Ratchet No 285-002 172.80

0-1 .0001 0-25 .004 Friction No 285-020 172.80

0-1 .0001 0-25 .004 Ratchet Yes 285-040 223.83 1-2 .0002 25-50 .004 Ratchet Yes 285-042 241.56

0-1 .0001 0-25 .004 Friction Yes 285-070 223.83 1-2 .0002 25-50 .004 Friction Yes 285-072 241.56 Sets 0-3 0-3 0-75 0-75 Ratchet Yes 285-080 743.76 5 • European Engineering and Design • Supplied with nationally traceable calibration certificates ® Value + • 12 + 12 Care Warranty Program START UP KIT #2 Total value of over Includes 1 each of the following: $356.10 • 0-1” Micrometer .0001” 285-100 List $38.70 • 1-2” Micrometer .0001” 285-102 List $41.80 For only • 6” Digimatic Caliper 286-500 List $64.40 • 0-1 .001” Dial Indicator 286-722 List $39.80 • Magnetic Base 287-200 List $32.10 $299.29! • .0005” x .030” Test Ind. 287-154 List $88.10 • 6” Pocket Rule 606-180 List $5.50 order by Promo • Engineers Black Book 180-155 List $45.70 Kit Code # 500-122

12” Dial/Digital Height Gauge 18” Dial/Digital Height Gauge Combo Combo • 0-12 .001 Dial/digital height gauge 287-100 • 0-18 .001 Dial/digital height gauge 287-102 Height Gauge & • 0-15-0 .0005 Grad .03 Range Indicator 287-154 • 0-15-0 .0005 Grad .03 Range Indicator 287-154 • Holding Bar & Clamp • Holding Bar & Clamp

Indicator Combo’s Height Gauge Features: Height Gauge Features: • Dial & digital counter reading • Dial & digital counter reading • Hand wheel for easier travel • Hand wheel for easier travel • Carbide tipped scriber • Carbide tipped scriber

Test Indicator Features Test Indicator Features • Jeweled bearings • Jeweled bearings • 5/32 & 3/8 dovetail stems • 5/32 & 3/8 dovetail stems Free Black included included Book with Height Gauge Combo Purchase ! $439.03 $584.63 Code # 500-147 Code # 500-148

24” Dial/Digital Height Gauge 12”/300mm Digimatic Height 24”/600mm Digimatic Height Combo Gauge Combo Gauge Combo • 0-24 .001 Dial/digital height gauge 287-104 • 0-12”/300mm Digimatic Height Gauge 287-131 • 0-24”/600mm Digimatic Height Gauge 287-132 • 0-15-0 .0005 Grad .03 Range Indicator 287-154 • 0-15-0 .0005 Grad .03 Range Indicator 287-154 • 0-15-0 .0005 Grad .03 Range Indicator 287-154 • Holding Bar & Clamp • Holding Bar & Clamp • Holding Bar & Clamp

Height Gauge Features: Height Gauge Features: Height Gauge Features: • Dial & digital counter reading • Fine Adjustment • Fine Adjustment • Hand wheel for easier travel • Easy to read large LCD display • Easy to read large LCD display • Carbide tipped scribery • Inch/Metric conversion • Inch/Metric conversion • SR44 (silver oxide cell) battery • SR44 (silver oxide cell) battery Test Indicator Features Test Indicator Features • Jeweled bearings Test Indicator Features • Jeweled bearings • 5/32 & 3/8 dovetail stems • Jeweled bearings • 5/32 & 3/8 dovetail stems included • 5/32 & 3/8 dovetail stems included included

$628.41 $493.00 $675.75

6 Code # 500-149 Code # 500-150 Code # 500-151 • European Engineering and Design • Supplied with nationally traceable calibration certificates ® Value + • 12 + 12 Care Warranty Program START UP KIT #3 Includes 1 each of the following: • 0-6” .0001” Micrometer Set 285-154 List $303.10 • 6” Digimatic Caliper 286-500 List $64.40 • 0-1 .001” Dial Indicator 286-722 List $39.80 • Magnetic Base 287-200 List $32.10 • .0001” x .008” Test Ind. 287-150 List $114.10 • 6” Pocket Rule 606-180 List $5.50 • Engineers Black Book 180-155 List $45.70 Total value of over $604.70 For only $516.63! order by Promo Kit Code # 500-152

KIT NO. 500-153 KIT NO. 500-154

Includes: Includes: • 0-6” .001 Dial Caliper 286-834 List $65.90 • 6”/150mm Digital Caliper 286-500 List $64.40 • 0-1” .001 0-100 Dial Ind 286-722 List $39.80 • 0-1” .001 0-100 Dial Ind 286-722 List $39.80 • Mag Stand c/w 6” rod 287-200 List $32.10 • Mag Stand c/w 6” rod 287-200 List $32.10 • 0-1” .0001 Outside Mic 285-100 List $38.70 • 0-1” .0001 Outside Mic 285-100 List $38.70 Total value of $176.50 Total value of $175.00 For only $150.03 For only $147.99 KIT NO. 500-155 KIT NO. 500-156

Includes: • 8”/200mm Digital Caliper 286-502 List $117.50 • 0-1” .001 0-100 Dial Ind 286-722 List $39.80 • Mag Stand c/w 6” rod 287-200 List $32.10 Includes: • 0-1” .0001 Outside Mic 285-100 List $38.70 • 8”/200mm Digital Caliper 286-502 List $117.50 • .315-5.90 Tele/gauge set 286-812 List $40.80 • 1”-2” .0001 Outside Mic 285-102 List $41.80 • 0-1” .001 0-100 Dial Ind 286-722 List $39.80 • 28 Edition Mach Handbook 180-105 List $156.00 • 6” Pocket Rule 606-180 List $5.50 • Mag Stand c/w 6” rod 287-200 List $32.10 • 6” Pocket Rule 606-180 List $5.50 Total value of $275.40 • 0-6” .0001 Mic set 285-154 List $303.10 Total value of $782.90 • 0-15 .0005”/.03” Test Ind 287-154 List $88.10 For only $230.69 For only $662.07

7 • European Engineering and Design • Supplied with nationally traceable calibration certificates ® Value + • 12 + 12 Care Warranty Program Kit # 500-174 Kit # 500-173

Includes 1 each of the following: • 6”/150mm Digimatic Caliper 286-500 List $64.40 • 0-1” .0001” Micrometer 285-100 List $38.70 SPECIAL $87.64 KIT NO. 500-175 Includes 1 each of the following: Includes 1 each of the following: • .0005” x .030” Test Ind. • 8”/200mm Digimatic Caliper 287-154 List $88.10 286-502 List $117.50 • Magnetic Base with Fine Adj. • 0-1” .0001” Micrometer 287-202 List $33.80 285-100 List $38.70 SPECIAL $132.77 SPECIAL $103.62

NOGA TEAMED WITH ASIMETO DIAL GAUGES OFFERING EXCEPTIONAL VALUE

BUNDLE NO. 1 [Package 1] Featuring: Contents: 1pc Noga Mag Base MA61003 Code-165-425 • 25” REACH 1pc Asimeto 1” .001” Dial Indicator Code-286-722 • 292 LBS HOLDING Code No. 500-116 Special $403.84

BUNDLE NO. 2 [Package 2] Contents: 1pc Noga Mag Base DG1033 Code-165-350 Featuring: 1pc Asimeto 1” .001” Dial Indicator Code-286-722 • 11” REACH Code No. 500-114 Special $202.05 • 180 LBS HOLDING

BUNDLE NO. 5 [Package 5] Featuring: Contents: 1pc Noga Mag Base DG1033 Code-165-350 • 11” REACH 1pc Asimeto .03” .0005” Dial Test Indicator Code-287-154 • 180 LBS HOLDING Code No. 500-124 Special $243.10

BUNDLE NO. 6 [Package 6] Contents: 1pc Noga Mag Base MA61003 Code-165-425 Featuring: 1pc Asimeto .03” .0005” Dial Test Indicator Code-287-154 • 25” REACH Code No. 500-132 Special $444.89 • 292 LBS HOLDING 8 TANDING OUTS EDS HUNDR ICES ON PR UCTS ! OF PROD PRECISION TOOLS THE COST EFFECTIVE ALTERNATIVE TO ALL YOUR WE GUARANTEE TO MATCH ALL PRECISION MEASURING REQUIREMENTS COMPETITORS PRICES

ALL STM PRODUCTSAREFULLYGUARANTEEDAGAINST MANUFACTURERSDEFECTSFORAPERIODOFONEYEAR. PRICESVALIDWHILESUPPLIESLASTANDARE SUBJECTTOCHANGEWITHOUTNOTICE.

DIAL INDICATORS MICROMETER SETS DIAL CALIPERS • Reverse counter • Covered rack • Stainless steel components • Ratchet and lock nut • Accurate to .001 per 6" • Rotating bezel with clamp • Complete with standards (2" and up) • Made of stainless steel • Lugback (1/4" hole) • Carbide faces • Clamp for repetitive setting • Interchangeable point • Fitted wood case • Deluxe case • Conforms to AGD 2 standards • .100" Revolution

Travel Dial Grad. SALE (in) (in) (in) Code No. Price $ 1/4 0-50-100 .001 200-745 17.09 1/2 0-50-100 .001 200-718 17.09 1 0-50-100 .001 200-720 17.09 Inch Metric 1 0-50-100 .0005 200-755 19.47 Range Grad. SALE Range Grad. SALE 2 0-50-100 .001 200-725 41.48 (in.) (in.) Code No. Price $ (in.) (mm) Code No. Price $ 1 0-50-100 .001 200-010 21.68 0-4 .001 200-562 33.07 150 .02 200-583 31.96 0-6 .001 200-582 31.96 200 .02 200-585 57.55 0-8 .001 200-584 56.10 300 .02 200-587 76.42 0-12 .001 200-586 74.89 STM MAGNETIC BASES DIGIMATIC CALIPERS • Inch/metric conversion • Auto on, auto shutoff • .0005"/.01mm resolution • Zero button

Range Grad. SALE (in x mm) (in x mm) Code No. Price $ INCH MICROMETERS 0-3 .0001 200-578 70.98 0-4 .0001 200-094 99.54 Standard Fine Adj. Flex Stem 0-6 .0001 200-580 171.53 Range SALE Model BA-1 BA-1F BA-1X SALE 6-12 .0001 200-096 353.43 (in x mm) Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ 0-12 .0001 200-098 536.10 0-4 x 100 200-642 53.38 MADE IN TAIWAN METRIC MICROMETERS 0-6 x 150 200-645 40.38 225-001 49.56 225-002 62.48 225-003 80.73 0-75mm .01mm 201-020 70.98 0-8 X 200 200-646 73.53 MADE IN CHINA 0-150mm .01mm 201-022 171.53 0-12 x 300 200-647 113.82 225-705 17.09 225-700 18.19 150-300mm .01mm 201-024 353.43 0-24 x 600 200-648 383.44 MADE IN USA 0-300mm .01mm 201-026 536.10 0-40 x 1000 200-649 602.06 225-805 73.53 PRECISION TOOLS SAVE !

COOLANT PROOF VERNIER CALIPERS OUTSIDE MICROMETERS WITH THUMB LOCK DIGIMATIC CALIPERS • Deluxe heat insulated forged steel frame up to 4" • Coolant resistant • Chrome clad • Inside, outside, step and depth measurements • Complete with standards (2" and up) • Inch/metric conversion • Carbide faces • Auto on, auto shutoff • Ratchet stop for exact and repetitive reading • .0005"/.01mm resolution • Fitted case • Zero button Range Graduation SALE IP 65 SPC OUTPUT (in x mm) (in x mm) Code No. Price $ 0-6 x 150 1/1000 x 1/20 200-210 29.58 0-8 x 200 1/1000 x 1/20 200-215 35.02 0-12 x 300 1/1000 x 1/20 200-220 65.82

VERNIER CALIPERS WITH FINE ADJUSTMENT

Range Grad. SALE Range Graduation SALE (in x mm) (in x mm) Code No. Price $ (in x mm) (in x mm) Code No. Price $ INCH MICROMETERS 0-6 x 150 .0005 x 0.01 200-945 164.14 0 -1 .0001 200-570 21.59 0-8 X 200 .0005 x 0.01 200-950 231.03 1-2 .0001 200-572 23.55 2-3 .0001 200-574 26.10 Range Graduation SALE 3-4 .0001 200-576 28.56 (in x mm) (in x mm) Code No. Price $ 4-5 .0001 200-577 33.24 0-6 x 150 1/1000 x 1/20 200-600 24.74 5-6 .0001 200-579 38.85 LARGE DISPLAY 0-8 X 200 1/1000 x 1/20 200-605 30.86 6-7 .0001 200-082 45.48 DIGIMATIC CALIPERS 0-12 x 300 1/1000 x 1/20 200-610 55.51 7-8 .0001 200-084 51.09 • Large face for easy reading 8-9 .0001 200-086 56.19 • Inside, outside, step and depth measurements 9-10 .0001 200-088 61.80 • Inch/metric conversion H.D. EXTRA LONG 10-11 .0001 200-090 66.90 • Auto on, auto shutoff VERNIER CALIPERS 11-12 .0001 200-092 72.51 • .0005"/.01mm resolution METRIC MICROMETERS • Zero button 0-25 .01mm 201-002 21.59 25-50 .01mm 201-004 23.55 50-75 .01mm 201-006 26.10 75-100 .01mm 201-008 28.56 100-125 .01mm 201-010 33.24 125-150 .01mm 201-012 38.85 Range Graduation Jaw Depth SALE 150-175 .01mm 201-013 54.15 (in x mm) (in x mm) (in) Code No. Price $ 175-200 .01mm 201-014 62.22 200-225 .01mm 201-015 59.95 0-12 x 300 1⁄1000 x 1⁄50 3 200-588 76.08 225-250 .01mm 201-016 66.01 0-18 x 450 1⁄1000 x 1⁄50 3-1⁄2 200-590 121.72 250-275 .01mm 201-017 71.33 0-24 x 600 1⁄1000 x 1⁄50 4 200-592 152.07 275-300 .01mm 201-018 77.30 0-40 x 1000 1⁄1000 x 1⁄50 5-1⁄2 200-594 334.39 Range Graduation SALE 0-60 x 1500 1⁄1000 x 1⁄50 6-1⁄2 200-596 759.82 (in x mm) (in x mm) Code No. Price $ 0-80 x 2000 1⁄1000 x 1⁄50 7-3⁄4 200-598 1,337.31 0-6 x 150 .0005 x 0.01 200-540 40.38 0-8 X 200 .0005 x 0.01 200-541 73.53 EDGE AND CENTRE FINDERS 0-12 x 300 .0005 x 0.01 200-542 113.82 PARALLEL CLAMPS Edge and Centre Finders Manufactured from case EF/4 hardened steel, parallel clamps are are time saving positioning designed for maximum strength tools for use on jig boring, EF/9 and rigidity. milling machines etc. TOOLMAKER VISES • Equipped with spring clip These are used for EF/6 • Solid one piece body • Retaining ring accurate locating work EF/7 • Square and parallel within 0.0002" and 0.0003" edges, shoulders, grooves, • Angled centre channel provides extra jaw capacity Capacity Jaw Model SALE centre points and scribed (in.) Length (in.) No. Code No. Price $ lines. EF/8 1-1/4 2 PC/1 231-286 7.31 EF/3 1-3/4 2-1/2 PC/2 231-288 8.84 2-1/4 3 PC/3 231-290 11.31 EF/1 2-3/4 4 PC/4 231-292 16.49 3-1/2 5 PC/5 231-294 26.18 EF/5 56PC/6 231-296 36.98 68PC/8 231-298 65.79 Shank SALE Model Tip Dia. Dia. Code No. Price $ BORE GAUGE (TAPER GAUGE) CENTRE FINDER EF/3 – 1/2 231-302 11.39 Manufactured from stainless steel, these have permanently engraved graduations.Accurate taper EF/9 – 3/8 231-304 11.14 throughout the length of the gauge. Available with COMBINATION EDGE & CENTRE FINDER Jaw Jaw imperial or metric graduations. EF/6 .200 3/8 231-306 12.33 Length Width Opening Height SALE EF/5 .200 1/2 231-308 13.01 Model No. (mm) (mm) (mm) (mm) Code No. Price $ EDGE FINDER YCT-VB20 140 48 65 25 230-815 85.09 EF/1 .200 3/8 231-310 9.61 YCT-VB25 170 63 90 35 230-820 104.13 EF/4 .200 1/2 231-312 11.39 YCT-VB30 180 73 90 35 230-825 113.31 EF/11 10mm 3/8 231-314 11.39 YCT-VB35 225 88 125 45 230-830 173.74 SALE EF/8 1/2 1/2 231-316 11.14 YCT-VB40 225 98 125 45 230-835 229.25 Range Model No. Code No. Price $ DOUBLE EDGE FINDER YCT-VB50 287 125 150 50 230-836 346.63 1/32"-5/8" BG/1-15/in 231-276 14.96 EF/7 .200 1/2 231-318 12.33 1-15mm BG/1-15 231-277 14.96

10 PRECISION TOOLS

COOLANT PROOF INTERCHANGEABLE ANVIL TWIN-COLUMN ELECTRONIC DIGIMATIC MICROMETERS OUTSIDE MICROMETERS HEIGHT GAUGES • Water resistant • Rigid twin column structure • Blue enamel finish • 6 digit LCD display and minus sign • Battery powered 1 year life • Perforated frame • Clear, easy to read LCD display • Functions include: Zero setting, inch/mm • Carbide tipped spindle conversion, data hold, plus/minus processing • .00005”"/.001 mm resolution and anvils • Carbide faces • Large size feed wheel • Ratchet stop and lock nut • Lock-on measuring slider • C/W Ball attachment • Setting standards included • Carbide tipped scriber • Battery furnished • Resolution .001"/0.0/mm • Complete with fitted case Range SALE Range Graduation SALE (mm) Code No. Price $ (in x mm) (in x mm) Code No. Price $ 12/300 mm 200-675 405.71 INCH MICROMETERS 18/450 mm 200-680 584.38 0-4 .001 200-025 133.79 24/600 mm 200-690 734.15 0-6 .001 200-030 170.26 Range SALE 6-12 .001 200-035 214.37 (in x mm) Code No. Price $ 12-16 .001 200-040 305.15 0-1 x 25 200-012 134.64 16-20 .001 200-045 316.20 TWIN COLUMN DIAL 12 x 25-50 200-014 154.96 METRIC MICROMETERS HEIGHT GAUGES 2-3 x 50-75 200-016 175.44 0-150 mm .01 mm 200-050 170.26 150-300 mm .01 mm 200-055 214.37 • 0.01" dual reading digital counter 300-400 mm .01 mm 200-060 284.67 • Double digital counter can be zero-set at any 400-500 mm .01 mm 200-065 322.24 height within range by depressing zero COOLANT PROOF reset button DIGIMATIC MIC SET • Chrome plated double beams • Water resistant • Carbide tipped scriber • Battery powered 1 year life DEPTH MICROMETERS • With fine adjusting wheel and lock • Clear, easy to read LCD display • Base surface hardened ground • Supplied with fitted case • .00005”"/.001 mm resolution • Satin chrome finish • Carbide faces • .001" graduations Range Graduation SALE • C/W Ball attachment • Complete with fitted case (in) (in) Code No. Price $ 12 0.0005 200-707 193.29 18 0.0005 200-708 333.29 20 0.0005 200-709 338.13 24 0.0005 200-711 376.81

COOLANT PROOF Range Graduation Base SALE (in/mm) (in/mm) (in/mm) Code No. Price $ DIAL INDICATOR Range SALE (in x mm) Code No. Price $ INCH DEPTH MICROMETERS • Water Resistant 0-4 .001 2-1/2 200-550 74.72 • Reverse counter 0-3 x 0-75 200-018 464.95 0-4 .001 4 200-552 74.72 • Stainless steel components 0-6 .001 2-1/2 200-557 96.22 • Rotating bezel with clamp 0-6 .001 4 200-555 96.22 • Lugback (1/4" hole) METRIC DEPTH MICROMETERS • Interchangeable point DIGIMATIC MICROMETERS 0-100 mm .01 mm 64 mm 200-440 115.52 • Conforms to AGD 2 standards Basic Model Deluxe Model 0-100 mm .01 mm 100 mm 200-445 115.52 • Battery powered 1 year life Same features as 0-150 mm .01 mm 64 mm 200-450 138.55 Travel Dial Grad. SALE • basic model plus: Clear, easy to read 0-150 mm .01 mm 100 mm 200-455 96.22 (in) (in) (in) Code No. Price $ LCD display • .00005"/.001 mm 0-.4 0-50 .0005 200-075 45.90 • .0001"/.001 mm resolution resolution • Carbide faces • Friction thimble • • Min./Max. Ratchet stop GRANITE SURFACE PLATES 0-LEDGE DIAL INDICATORS • Enamel finish • Hold function Imported Precision Toolroom Black Granite Surface Plates • • Reverse counter Case included These plates are made of the highest quality – • Stainless steel components True Black – Fine Grained – Non-porous – • Rotating bezel with clamp Jewel Hardness – Granite • Lugback (1/4" hole) available to give years of long lasting service. • Interchangeable point A1-921 Specifications: • Conforms to AGD 2 standards Compressive Strength 7329 lbs. / in 2 Water Absorptivity 0.13% Range Graduation SALE Model No Grad Range SALE (in x mm) (in x mm) Code No. Price $ (in) (in) Reading Code No. Price $ 0-1 x 0-25 .00005 x 0.001 200-020 152.83 AI-911-Teclock Style .001 1/2 0-100 215-005 42.84 AI-921-Teclock .001 1 0-100 215-010 46.41 MICROMETER STAND An indispensable clamping device for 18 PI ECE WAVY precise and stable measurements, it is Size Thickness Ship. Wt. SALE most useful to speed up production (in) (in) (lb) (±) Code No. Price $ PARALLEL SET • Consists of 9 pair ranging from 1/2 and quality inspection jobs. GRADE B–TOOL ROOM–NO LEDGE to 1-1/2" in 1/8" height 9 x 12 3 40 .0001 255-100 55.76 increments 12 x 18 3 110 .0001 255-105 85.26 • Complete with fitted case 18 x 24 4 189 .00015 255-110 228.74 • Made of high quality spring 24 x 36 4 475 .0002 255-115 413.61 steel, hardened, stress relieved 36 x 48 6 1427 .0004 255-120 1,317.33 and precision ground 48 x 72 8 3300 .0007 255-125 4,108.22 • Guaranteed to size in height and GRADE A–INSPECTION parallelism ±.0002" SALE 12 x 18 3 110 .000050 255-130 98.77 Code No. Price $ 18 x 24 3 189 .000075 255-135 206.38 200-500 18.36 24 x 36 4 475 .0001 255-140 435.12 SALE Description Code No. Price $ 18 piece wavy parallel set 230-150 87.38

11 Precision Tools SAVE !

TEST INDICATORS STEEL PARALLEL SET AND SETS HALF ROUND All 10 Pairs Including Fitted Case COMBINATION HOLDER • White face • Thin style, 1/8" thick • Available in bezel or dial • Matched pairs • Two-point adjustment • Contact point adjustable through 230° • Made of high grade • 1/4" shank • Fully jeweled movement steel alloy • For dovetail and 5/32" • Extremely light contact pressure • Hardened and ground stem indicators • Clear, easy to read face • Tolerance ± 0.0003" • Dovetails on top and back for all- around positioning SALE Description Code No. Price $ SETS Half round combination holder 200-816 10.29 • Includes 5/32" and 3/8" mounting shanks and 3/8" bar SELECT-A-POINT KIT Dial Dia. Grad. Range Reading Pt. Length SALE The most useful accessory kit for all dial indicators - (in) (in) (in) (in) (in) Code No. Price $ SALE a complete set of 22 different points, increasing the Width Height Length Code No. Price $ INDIVIDUAL versatility of your indicators. 1.250 .0005 .030 0-15-0 .700 200-730 50.32 1/8” 1/2, 5/8, 3/4, 7/8, 1, 6” 230-863 74.63 • Fits all AGD 1, 2, 3, 4 drop style indicators, 4-48 threads 1.250 .0001 .008 0-4-0 .650 200-800 74.21 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8 SETS SALE 1.250 .0005 .030 0-15-0 .700 200-805 83.81 Code No. Price $ 1.250 .0001 .008 0-4-0 .650 200-810 112.46 STEEL PARALLEL PAIRS 200-820 7.99

CO-AX INDICATOR SUPER MAG High quality import version of • 5 different locations for mounting accessories: the popular Co-Ax Indicator. SALE – 3 positions 1/4-20 for lug mounts, 1 tapped hole Includes: W x H x L Hole Size Code No. Price $ 10-32, 1 reamed hole 3/8" • Retaining rod 1/8 x 1/2 x 6 13/64 230-200 7.48 • Size 4-1/2" x 1" x 1-1/4" • Centre point feeler 1/8 x 5/8 x 6 1/4 230-205 8.08 • 2", 4" and 6" straight feelers 1/8 x 3/4 x 6 5/16 230-210 8.08 • 4", 8" and 12" curved feelers 1/8 x 7/8 x 6 5/16 230-215 8.08 • .0005" graduations 1/8 x 1 x 6 5/16 230-220 8.08 SALE 1/8 x 1-1/8 x 6 3/8 230-225 8.08 Description Code No. Price $ Super Mag 200-880 9.27 SALE 1/8 x 1-1/4 x 6 3/8 230-230 8.08 Description Code No. Price $ 1/8 x 1-3/8 x 6 7/16 230-235 8.08 Co-Ax indicator 200-005 191.34 1/8 x 1-1/2 x 6 1/2 230-240 8.08 1/8 x 1-5/8 x 6 1/2 230-245 8.08 RADIUS GAUGE SETS

• Used for measuring concave MINI MAGNETIC STANDS and convex surfaces DIAL BORE GAUGE SETS This range of handy magnetic stands provide a simple & Furnished with interchangeable anvils and inexpensive way of holding dial necessary accessories to perform close indicators on any flat ferrous SALE tolerance I.D. measurements. The smallest range surface. Sizes Consisting of: Code No. Price $ measurement is .24", the largest is 16". The AGD To activate simply pull out the base .010, .015, .020, .025, .030, .040, .050, Series 2 Dial Indicator furnished from contact face. Available with or .060, .070, .080, .090, .100, .120, .140, in each kit is a rugged top-quality unit. without fine fitting. .160, .180, .200, .220, .240, .260, .280, • .0005" graduations .300, .350, .400, .450 , .500" in vinyl case • Complete with fitted case Base Base Mag SALE Model No. Dia. (in.) Height (in.) Pull kg. Code No. Price $ 26 pc. set with holder 230-005 35.28 MMS/1 1-1/8 15231-138 13.94 .5 to 13.0 mm x .5 mm increases 26 pc. set with holder 230-010 35.28 MMS/DA-4 1-1/8 15231-140 20.83 MMS/DA-5 1-3/8 1-3/16 8 231-142 22.02 RADIUS GAUGES Range Bore No. SALE SURFACE GAUGES (in) Depth Anvils Code No. Price $ Satin Finish Stainless Steel 0.24–0.4 1.56” 9 200-650 139.91 No. L300 Series 0.4–0.7 2.4” 9 200-651 121.72 0.7–1.4 4” 8 200-652 103.36 SALE 1.4–2.0 6” 6 200-653 103.36 Description Code No. Price $ SALE Model No. Specifications Code No. Price $ 2.0–6.0 6” 11 200-654 106.42 4" and 7" spindles 200-840 23.12 ” L 300 CX 1⁄64–17⁄64 x 64ths 9⁄32–1⁄2 x 32nds 225-005 106.85 6.4–10.0 16 6 200-655 130.82 9" and 12" spindles 200-845 27.46 ” L 300 MX 0.5mm–13mm x 0.5mm 225-010 192.10 10.0–16.0 16 6 200-656 149.01 12" and 18" spindles 200-850 29.24 1/64–17/64 x 64ths 9/32–1/2 x 32nds 230-015 34.17

MAG BASE INDICATOR HOLDER DIAL TEST INDICATOR HOLDER SMALL HOLE GAUGE Here is a rugged holder for indicators for use as lathe • Adapts immediately for fast and positive indicating stops, etc. Lug back • Suitable for all popular indicators with 5/32" shank Set of 4 Gauges .125" –.500" or dovetail • Reach from 0-12" diameter • 1-7/8" capacity

SALE SALE SALE Description Code No. Price $ Description Code No. Price $ Sizes Consisting of: Code No. Price $ Set of 4 Gauges .125" –.500" – Made in USA 220-940 Mag. base ind. holder 200-885 9.27 Dial test indicator holder 200-815 17.09 78.54 Set of 4 Gauges .125"–.500" – Quality Import 200-713 19.47 12 PRECISION TOOLS

TELESCOPING GAUGES 1-2-3 & 2-4-6 BLOCKS MACHINERY HANDBOOK 28 TH EDITION • Heat treated and case hardened to HRC 55-60 • Precision ground and case hardened • Squareness of all sides is within .0001" 6 Piece Set • Parallel Accuracy 0.0003" • Surface finish 6–16 micro inches • 23 holes–5 are tapped in 3/8-16 • Supplied in pairs SALE Sizes Consisting of: Code No. Price $ 5⁄16–1/2, 1⁄2–3⁄4, 3⁄4–1-1⁄4, 200-710 29.16 1-1⁄4–2-1⁄8, 2-1⁄8–3-1⁄2, 3-1⁄2–6 5⁄16–2-1⁄8 200-712 21.00 SALE Size Description Code No. Price $ RADIUS GAUGE Description Code No. Price $ 1-2-3 23 Holes 230-870 26.95 Machinery Handbook 28 180-105 156.00 2-4-6 23 Holes 230-872 220.07 Large Print Version 28 180-115 190.40 1-2-3 No Hole (Pair) 230-874 27.20 SALE CD Rom Version 28 180-120 165.30 Model No. Specifications Code No. Price $ Machinery Handbook Guide 28 180-110 23.90 272A 1/32–17/64 x 64ths 225-230 22.36 MAGNETIC VEE BLOCKS Used to hold cylindrical workpieces for DIGIMATIC SCALE UNIT grinding. Will hold both itself and the FEELER GAUGE work on any flat ferrous surface, • 26 tapered leaf thickness gauges including a permanent magnet chuck • 3" long (without energizing the chuck.) There are two vees: Range SALE • The smaller for workpieces up to (in) Code No. Price $ .750" diameter and the larger for Range Accuracy SALE .0015 to .025" 606-050 24.14 workpieces up to 2.500" diameter (in) (in) Code No. Price $ 0-150 mm/0-6 0-150 ±0.03 201-050 55.59 SALE 0-200 mm/0-8 0-200 ±0.03 201-055 70.72 Description Code No. Price $ ACME GAUGE 0-300 mm/0-12 200-300 ±0.04 201-056 109.14 Magnetic vee blocks 225-710 85.17

Range SALE (in) Code No. Price $ TOOL MAKER’S V-BLOCK & CLAMP SETS 1-10 TPI (29°) 225-450 30.35 This range of Vee blocks is made from finely selected tool steel fully hardened to 55-60 HRC. Manufactured and numbered in matched pairs, each pair has two 90° Vees of different capacities which are identical to the Vees of its matching block. The Vee’s are ground central, parallel and CENTRE GAUGE square with the ends and sides. • Satin-chrome finish SALE • American National Block Length (in.) Block Width (in.) Block Height (in.) Type Model No. Code No. Price $ Standard 1-19/32 1-1/4 1-1/4 Regular VB/SP/T-30 231-072 55.00 2 1-1/2 1-1/2 Regular VB/SP/T-35 231-074 65.88 Range Graduation SALE 2-3/4 1-3/4 1-5/8 Regular VB/SP/T-70 231-076 93.33 (in) (in) Code No. Price $ 2-3/4 2-1/2 1-3/4 Non-Protruding VB/SP/R/T-70 231-078 125.80 650 U.S. Standard, 60° 225-410 11.39 4-7/8 3-1/2 2-3/4 Non-Protruding VB/SP/R/T-125 231-080 335.16 652 Metric Standard, 60° 225-415 11.39 Model No.’s - VB/SP/T-30 & VB/SP/T-70 available as set in wooden case DUET/02 231-415 163.59

SCREW PITCH GAUGE SPECIALTY RULES • With locking devices Narrow Rules, Depth Gauge Rules

SALE Model No. Description Graduations Code No. Price $ 7305-006 6" with clip 32nds one face, 64ths other face 606-156 10.37 Model No. SALE 7305-012 12" with clip 32nds one face, 64ths other face 606-158 18.53 No. Leaves Range Code No. Price $ 7305-006 6" without clip 32nds one face, 64ths other face 606-160 7.31 472 34 4 to 84 225-315 46.67 7305-012 12" without clip 32nds one face, 64ths other face 606-162 18.28 156M 28 0.25 to 2.50 mm 225-320 24.99 7305-M06 6" with clip 32nds one face, 0.5 mm other face 606-164 10.37 5628 28 4 to 80 225-325 26.61 7305-M12 12" with clip 32nds one face, 0.5 mm other face 606-166 18.53 5617 18 .5” to 7.00” 225-330 22.95 7305-M06 6" without clip 32nds one face, 0.5 mm other face 606-168 5.61 5629 28 4 to 56 .5-6.0mm 225-335 26.61 7305-M12 12" without clip 32nds one face, 0.5 mm other face 606-170 13.69 7305-M15 150 mm with clip mm one face, 0.5 mm other face 606-172 10.37 7305-M30 300 mm with clip mm one face, 0.5 mm other face 606-174 13.01 7305-M15 150 mm without clip mm one face, 0.5 mm other face 606-176 7.31 THREAD MEASURING SETS 7305-M30 300 mm without clip mm one face, 0.5 mm other face 606-178 18.28 • 48 wires – 16 different sizes Round End Rules • Measures all threads from 3 to 48 threads per inch SALE • Laminated chart included in case Model No. Description Graduations Code No. Price $ • Furnished in vinyl case 7202-SS6 6" flex, not plated, round end rule with clip 32nds, 64ths 606-180 4.68 Decimal equivalent chart on back 7203-SS6 6" flex, not plated, round end rule with clip mm, 64ths 606-182 4.68 Metric equivalent chart on back 7202-C06 6" flex, chrome plated, round end rule with clip 32nds, 64ths 606-184 8.08 Decimal equivalent chart on back 7203-C06 6" flex, chrome plated, round end rule with clip mm, 64ths 606-186 11.39 SALE Metric equivalent chart on back Description Code No. Price $ Thread Measuring Set 200-870 14.71 13 Precision Tools

THE ENGINEERS BLACK BOOK THE FASTENER BLACK BOOK 2 ND EDITION AVAILABLE IN: • Inch / Fasteners • Imperial Version • ISO & DIN Specifications • Fastener Platings & Finishes • Tables • Standards • Pre-Loads & Tightening Torques • Grind Wheels • Conversion Factors • Thread Terminology & Classifications • Bolts & Nuts • Formulae • Standard Grades, Tolerances & Markings • Tapers • Keys and Keyways • Thread Forms, Heads, Points, Materials • Tapping Drill Sizes • Speeds and Feeds and Coatings • Tolerances • G Codes • Spur Gear Calculations • Engineering Drawing • Hardening and Tempering Standards Includes a Free • Sharpening Information • Geometrical Construction • Illustrations • Tungsten Carbide Thread Gauge! • Lubricants-Coolants • Equivalent Charts • Weights of Metals

Description Code No. Price $ Description Code No. Price $ Engineers Black Book Imperial version 180-155 45.70 Fastener Black Book 180-156 46.00

FIRM JOINT CALIPERS SINE VISES UNIVERSAL ANGLE BLOCK SET - INSIDE & OUTSIDE • Set complete in fitted case • Body is one solid piece of steel, hardened like • Size 3" long by 1/4" thick Manufactured from selected the rest of the sine vise to Rc 58-62 • Hardened steel, precision ground steel, firm joint calipers are • Dual .200" minute steps for setting small angles • Accuracy ± .0001" per inch ruggedly constructed and well with standard gauge blocks are built into the finished. Size refers to the gauge block roll length of the legs, their actual • All 7-1/2" x 3" sine vises have small horizontal measuring capacity is about and vertical vees in the moveable jaw one-third greater than the • Provides a quick and accurate means of holding given size of the legs. a workpiece at an angle for machining, drilling or grinding DK33-006 DK32-027 Inside SALE Outside SALE SALE Size (in.) Code No. Price $ Code No. Price $ Model No. Description Code No. Price $ 4 231-220 4.08 231-232 4.08 DK 33-006 1 pc. each 1°, 2°, 230-867 70.55 5 231-222 4.42 231-234 4.42 3°, 4°, 5°, 10°, 6 231-224 4.68 231-236 4.68 15°, 20°, 25°, 30° 8 231-226 6.29 231-238 6.29 DK 32-027 1 pc. each 1°, 2°, 3° 230-865 138.89 10 231-228 10.03 231-240 10.03 4°, 5°, 10°, 15°, 30° 12 231-230 12.24 231-242 12.24 SALE Model No. Size (in) Code No. Price $ CENTRE SQUARE JENNY CALIPERS - YCT-SV20 2-1/2 x 2 230-700 154.70 YCT-SV25 3-1/2 x 2-1/2 230-705 187.00 The knife edge is made HERMAPHRODITE CALIPERS YCT-SV30 3-1/2 x 2-7/8 230-710 237.75 from Spring Steel and is YCT-SV200 2-3/8 x 2 230-715 474.05 hardened and ground for Manufactured from selected steel, the YCT-SV250 2-7/8 x 2-1/2 230-720 447.02 extended life. legs are exceptionally rugged and well YCT-SC300 3-3/8 x 3 230-725 568.82 finished. The leg that holds the adjustable point is offset. The locating lug is incorporated in the straight leg. SALE BEVEL EDGE SQUARES Work Dia. Model No. Code No. Price $ • Accuracy Class H 1-1/2 CS/1 231-320 15.47 • Hardened steel squares 3 CS/2 231-322 29.41 SALE • Accurate right angles both Size (in.) Cat. No. Code No. Price $ inside and outside 6 JC/6 231-244 7.31 • Blades are beveled on both ENGINEER’S TOOL SETS edges of each side • Made from seasoned tool steel ETS/1 contains: Inside Caliper 4", Outside Caliper 4", • Beams and blades are ground Screw Cutting Gauge, Steel Rule 6", Pocket Scriber and accurately lapped for 3-1/2", and Centre Punch 5/32". PIN VISES & SET straightness and parallelism ETS/2 contains: Engineer’s Precision Square 4", • Made of alloy steel, black oxide SALE Jenny Caliper 6", Steel Rule 6", Double Ended Scriber finish Blade Size Beam Code No. Price $ 7-1/2", Centre Punch 5/32", Adjustable Tap and • Collets grip firmly when chuck is Reamer Wrench, and Spring Divider 4". tightened 2-3/8 1-3/8 230-340 20.15 3-1/8 2 230-345 23.80 • Knurled finger grip ETS/1 ETS/2 • Range of set 0 - .188" 53230-350 30.52 • Supplied in Plastic Pouch 6-1/4 4 230-355 42.59 • Ideal for holding small tools, rods, 7-7/8 5 230-360 51.68 wires, taps, etc.

SALE Model No. Description Code No. Price $ PEN SCRIBER 6000-004 4 pc. Pin Vise Set 606-228 13.60 6000-004A .000-.040 Pin Vise 606-230 3.74 6000-004B .032-.059 Pin Vise 606-232 3.74 6000-004C .052-.122 Pin Vise 606-234 3.74 SALE SALE 6000-004D .118-.188 Pin Vise 606-236 3.74 Description Code No. Price $ Model No. Code No. Price $ Pen Scriber c/w carbide point 201-060 4.00 ETS/1 231-278 39.27 Replacement carbide point 201-065 1.28 ETS/2 231-280 55.51

14 PRECISION TOOLS

STANDARD RECTANGULAR GAUGE BLOCK DEPTH GAUGE SET WORKSHOP GRADE B WITH PROTRACTOR • For those who need a competitively priced B grade set A versatile tool, the Depth Gauge with Protractor • All blocks are manufactured to the same high standards as our allows for measurement of both angles and premium sets depths. • Each set is supplied with a certificate guaranteeing that each block is • Stainless Steel manufactured to meet or exceed federal spec GGG-G-15C, and is • Graduations: 0-180° in opposite directions within the grade B tolerance (±.000050) • 6" (150 mm) steel rule • This certificate does not show the individual deviation of each block • Each set is provided in a fitted wooden case

SALE No. of Blocks Blocks Included Code No. Price $ 81 piece set 9–.1001-.1009 in .0001 steps, 49–.101-.149 in .001 steps, 200-715 158.10 19–.050-.950 in .050 steps, 4–1.000-4.000 in 1.000 steps SALE Type Code No. Price $ Round 231-270 15.56 ENGINEER’S PRECISION SQUARES PRECISION STEEL PIN GAUGE SETS Rectangular 231-272 16.83 Hardened spring steel blades are permanently fixed • Hardness: heat treated to a hardness of 60-62 to the stock by means of tapered self-locking rivets Rockwell C Drill Rod DEPTH AND ANGLE GAUGE which ensure complete rigidity. Both the blade and • All members 2" long, centreless lapped stock are precisely ground to ensure straightness • Size Electro etched in each piece The ability to measure depths and angles is and parallelism. • Finish: Each gauge inspected and has 10 micro combined in this versatile tool. The head is made finish or better from selected steel and has an attractive black finish. • Deluxe box with insert It is graduated both left and right to 15°, 30° and 45° • Tolerance: Minus -.0002"/+.0000" and the rule can be set to any of these angles. A 6" (150mm) steel rule is fitted to the head and can be locked in final position for depth or angular measurements by a knurled nut.

Gauge Set No. of Minus SALE Blade SALE Length (in.) Model No. Code No. Price $ No. Range Gauges Code No. Price $ 2 SS/A/2 231-000 14.88 P-0 .011-.060 50 255-145 41.99 3 SS/A/3 231-010 14.88 P-1 .061-.250 190 255-040 90.44 SALE P-2 .251-.500 250 255-045 173.57 Rule Length Code No. Price $ 4 SS/A/4 231-015 20.66 6 SS/A/6 231-020 26.35 P-3 .501-.625 125 255-150 173.32 6" 231-274 11.82 9 SS/A/9 231-030 65.79 P-4 .626-.750 125 255-155 176.97 12 SS/A/12 231-040 98.86 P-5 .751-.832 82 255-160 181.31 Set 1 SS/A/2-3-4-6 231-045 87.81 P-6 .833-.916 84 255-165 250.41 Set 2 SS/A/2-4-6 231-050 73.02 P-7 .917-1.000 84 255-170 264.52 DEGREE PROTRACTORS

This stainless steel protractor comes with either a semi-circular or a rectangular head. The head has UNIVERSAL BEVEL PROTRACTORS permanently deep etched graduations, 0 to 180° in opposite directions thus permitting reading an angle directly and also its supplement. The 6" (150 mm) blade has a graduation line on one end that permits accurate setting and reading of angles.

SALE Description Blade Size (in) Code No. Price $ Protractor head with magnifier lens 6 and 12 205-610 73.02

SALE Type Code No. Price $ SCRIBERS Round 231-266 13.94 MS/3-ST 3 interchangeable threaded points, short straight, short bent and long bent Rectangular 231-268 15.13 MS/4 Single ended light duty MS / MG/6 Tungsten carbide tip for marking on hard materials. Permanent magnet on the other end for picking up small metal parts WIGGLER OR CENTRE FINDER MS/P/3 Scriber point is held by a knurled chuck and can be reversed when not in use MS/ST/9 Single ended heavy duty Comes with four interchangeable attachments. MSCP/6 Double ended – combining a needle point with a chisel end They can be snapped onto the chuck without MS/7 Double ended with one straight point and one point bent at 90° MS/H/8 removing the collet. Spring tension on the ball of MS/H/8 Double ended heavy duty with one straight point and the other bent at 90° the point. MS/7 MS/3-ST MS/ST/9 SALE MSCP/6 O.A.L. Model No. Code No. Price $ MS/MG/6 9 & 12 MS/3-ST 231-250 4.25 4-1/2 MS/4 231-252 1.70 MS/4 MS/P/3 6 MS/MG/6 231-254 7.14 SALE 3-1/2 MS/P/3 231-256 4.00 Description Code No. Price $ 7 MS/ST/9 231-258 2.64 Centre Finder complete with 231-300 27.80 6-3/4 MSCP/6 231-260 3.15 4 attachments WCF/WZ-6 7-1/2 MS/7 231-262 2.64 9-3/16 MS/H/8 231-264 3.15 15 PRECISION TOOLS

TRANSFER PUNCH SET BRASS DRIVE PIN PUNCHES AND SET 5PC X-LONG PIN PUNCH • Made of brass 28 Punches in Metal • Punch section centreless ground SET - VINYL POUCH • Hexagonal body style Indexed Stand • Single piece construction with • Used in spark-free environments hexagonal shank. Single piece • Heat treated tempered • 4" length construction imparts additional steel • Set supplied in fitted pouch with durability to the punch. The pin end • Consists of one each of clear size markings punch sizes 3/32 thru is ground with the body in premium 1/2 x 64th plus 17/32 in SALE powder coated finish. metal indexed stand Description Code No. Price $ 8 pc. Brass Drive Pin Punch Set 606-268 32.90 SALE SALE 1/16" Brass Drive Pin Punch 606-270 4.68 Description Code No. Price $ Description Code No. Price $ 3/32" Brass Drive Pin Punch 606-272 4.68 1/8, 3/16, 1/4, 5/16, 3/8 606-650 41.31 3/32 thru 1/2 x 64th plus 17/32 200-750 18.36 1/8" Brass Drive Pin Punch 606-274 4.68 5/32" Brass Drive Pin Punch 606-276 4.68 8 EXTRA LONG DRIVE 3/16" Brass Drive Pin Punch 606-278 4.68 PC PIN PUNCH SET 7/32" Brass Drive Pin Punch 606-280 4.68 WOODEN CASE PIN PUNCHES AND SET 1/4" Brass Drive Pin Punch 606-282 4.68 • Made of tool steel • These round shank pin punches • Punch section centreless ground CENTRE PUNCHES have clean and well cut knurling • Handles black oxide for rust prevention which provides positive, non slip • Knurled body for better grip • Made of tool steel grip. This range of punches have a • Hardened both ends, Rc 45 to 52 • Black oxide finish for rust prevention black oxide finish. • 8" length, drive pin section 3-1/2" long • Knurled body for better grip SALE • Set supplied in fitted pouch with clear size markings • Hardened both ends, RC 45 to 52 Description Code No. Price $ • Points precision ground • 4" length, 1/16" diameter, 1/16, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8 606-630 41.06 punch 3" long • Set supplied in fitted case with clear size markings HEAVY DUTY CENTRE SALE SALE PUNCH SET Description Code No. Price $ Style Description Code No. Price $ 5 pc. X-Long Drive Pin Punch Set 606-238 24.14 5 pc. set 1/16, 5/64, 3/32, 9/64, 5/32 606-286 13.01 • Single piece construction with 1/8" X-Long Drive Pin Punch 606-240 3.83 Individual 1/16 606-288 2.30 hexagonal shank, these are one 3/16" X-Long Drive Pin Punch 606-242 4.25 Individual 5/64 606-290 2.30 of the strongest and most 1/4" X-Long Drive Pin Punch 606-244 4.51 Individual 3/32 606-292 2.30 durable of Centre Punches. The 5/16" X-Long Drive Pin Punch 606-246 4.68 Individual 9/64 606-294 2.30 punches have ground working ends, with the body in premium 3/8" X-Long Drive Pin Punch 606-248 4.85 Individual 5/32 606-296 2.30 powder coated finish.

SALE DRIVE PIN PUNCHES AND SET COMBINATION PUNCH SET Description Code No. Price $ • Made of tool steel 5pc set 5/64-3/8 606-640 28.99 • Punch section centreless ground • Made of tool steel *7pc set 5/64-3/8 606-645 39.10 • Black oxide finish for rust prevention • Handles black oxide for rust prevention * extra 5/32 & 1/4 c/w larger stock • Knurled body for better grip • Knurled body for better grip • Hardened both ends, Rc 45 to 52 • Hardened both ends, RC 45 to 52 • 4" length • 4" length 8 • Set supplied in fitted pouch with clear • Supplied in fitted case PC CENTRE PUNCH SET size markings • Set contains: 5/32" drive pin punch 5/32" centre punch and scriber • One piece construction with round SALE striking head.The knurling is clean Model No. Description Code No. Price $ and well cut to provide a positive 6304-003 3 pc. set 606-298 8.59 finger grip. This range of punches have a black oxide finish. SALE Description Code No. Price $ NUMBER STAMP SETS SALE 8 pc. Drive Pin Punch Set 606-250 20.49 Manufactured from high quality Description Code No. Price $ 1/16" Drive Pin Punch 606-252 2.38 steel, punches are through 8pc 1/16 - 7/32 606-635 37.66 3/32" Drive Pin Punch 606-254 2.38 induction hardened, which gives 1/8" Drive Pin Punch 606-256 2.38 durability and extended life even 5/32" Drive Pin Punch 606-258 2.38 after repeated use. 14 3/16" Drive Pin Punch 606-260 2.38 PC PUNCH AND CHISEL SET 7/32" Drive Pin Punch 606-262 2.38 Stamp. SALE$ Contents: 1/4" Drive Pin Punch 606-264 2.38 Description Size Code No. Price $ • 5 Octagonal Cold Chisels,3/8, 1/2, 5/8, 3/4, 7/8 • 2 Heavy Duty Centre Punches 5/32, 1/4 5/16" Drive Pin Punch 606-266 2.89 9pc, 0-9 1/8 606-600 9.95 • 3 Heavy Duty Pin Punches 1/16, 1/8. 3/16 3/16 606-605 14.11 • 2 Heavy Duty Drift Punches 1/8, 5/32 1/4 606-610 17.68 AUTOMATIC CENTRE PUNCHES • 2 Heavy Duty Starting Punches 5/16, 1/8 • Automatic, spring operated action • Adjustable for very light to heavy strokes LETTER STAMP SETS • Replaceable point ground and hardened Manufactured from high quality • Used for marking, punching, stalking and riveting steel, punches are through induction hardened, which gives durability and extended life even after repeated use. SALE Stamp SALE SALE Model No. Description Code No. Price $ Description Size Code No. Price $ Model No. Code No. Price $ P170 Standard duty 606-300 8.84 27pc, A - Z, plus “&” stamp 1/8 606-615 29.58 KIT/14 606-655 86.11 P171 Heavy duty 606-302 22.02 3/16 606-620 42.25 P171-P Replacement point 606-304 4.08 1/4 606-625 53.04

SOWA TOOL & MACHINE CO. LTD. Western Canada Branch Toll Free: 1-800-265-8221 500 Manitou Drive 9649-49th Ave Phone: (519) 748-5750 Kitchener, Ontario Edmonton, AB Fax: (519) 748-9304 N2G 4B6 T6E 5Z5 Email: [email protected] July 2010 web: www.sowatool.com Flyer No. CPRE710 *Cpre710*