sign in sign up
<<
Home , Buckle

Belt Supplies: yy creative™ 2.0 and machine yy Purple Denim 20" x 55" (50 x 140 cm) yy Purple Taffeta 4" x 55" (10 x 140 cm) yy Fusible 12" x 36" (30 x 90 cm) yy Silver buckle yy Silver metallic eyelets yy 40 wt for the embroidery yy Topstitching Thread yy Thread yy Sewing Thread yy Needle yy Tear-away stabilizer yy Chalk marker yy ® Accessories: yy Sensormatic/Embroidery Foot 820671-096 yy Invisible Foot 820676-096 yy Bi-level Topstitch Foot w/IDT™ 820676-096 yy Sewing Star Foot 820654-096 yy creative™ Master Hoop 4129685-02 yy Swarovski crystals 500000926 yy Decorative touch applicator 500000931 You can find these and many other accessories in the Pfaff® Accessory Catalogue or on our website www.Pfaff.com for purchase at your nearest Pfaff® Dealer. Cutting Instructions: yy Purple Denim 2 - 12" x 22" (30 x 56 cm) front 2 – 5 ½" x 22" (14 x 56 cm) belt back yy Taffeta 2 - 3 ¼" x 22" (8 x 56 cm) yy Interfacing 2 – 3 ¼" x 22" (8 x 56 cm) ½" (1 cm) allowance is included in the measurement. creative™ 2.0 Belt 1 illu 5 illu 1 illu 2 illu 6 illu 3

4 3/4” (12cm) Assembly Instructions: yy Slide on the embroidery unit. Thread illu 7

yy Press fusible interfacing on the wrong side illu 4 of the taffeta strips. To get a 1 3/4" (4 cm) wide strip. Fold ¾" (2 cm) on both long edges of the taffeta strips to wrong side and press. Mark a centre line on the right side of both taffeta strips with a chalk marker. illu 5 2 3/8” illu 1 (6cm)

illu 5 6 ” (15 cm) yy Place the end template in the centre of one illu 1 of the purple denim strips and mark the your Pfaff® embroidery machine with illu 2 round part of the front corners and continue embroidery thread on top the bobbin. Insert the line down on each side. Also mark the an embroidery needle and snap on the center line down the length of the strip. embroidery foot. illu 2 yy

illu 6 Choose embroidery # 79 and decrease the size down to 80%. Embroider the design as illustrated.

yy

illu 6 Remove the embroidery unit. Snap on the illu 5 illu 1 illu 5 illu 1 illu 3

4 3/4” (12cm) illu 5

Belt half with the buckle illu 1 illu 2 illu 3 illu 7 illu 2

yy Thread your machine with white rayon illu 4 thread on top and in the bobbin. Snap on the Sewing Star foot. Choose4 3/4 a” (12cm)9 mm

illu 7 decorative , we used stitch 121. Sew illu 6

illu 4 Sewing Star foot and change to white

2 rows of the decorative stitches on one of illu 2 illu 6 the taffeta strips, each 4 ¾" (12 cm) long rayon thread on top and in the bobbin and continue to sew 2 rows of the decorative and spacing the rows approximately 3/8"2 3/8” (0.75 cm) apart. (6cm) stitches on the left side of the embroidery.

yy Center the taffeta strip on the right side illu 6 6 ” (15 cm) of the purple denim strip and place the2 3/8 ”

(6cm) illu 3 illu 3

6 ” (15 cm) 4 3/4” (12cm) 4 3/4” (12cm) illu 7 illu 4 illu 7 illu 3 strip 2 3/8" (6 cm) beyond the short front illu 4 edge. Change to Bi-level Topstitch Foot and thread the machine with purple embroidery 4 3/4” (12cm)

thread. Sew the taffeta strip in place with a illu 7

3/8" (6 cm) seam on both sides of the strip Belt half without buckle illu 4 and along the top. 2 3/8” 2 3/8” yy Center the taffeta strip on the right side of (6cm) (6cm)

6 ” (15 cm) 6 ” (15 cm)

creative™ 2.0 Belt 2 2 3/8” (6cm)

6 ” (15 cm) illu 5 illu 1 illu 13 illu 8 illu 11 illu 2

the other purple denim strip. Change to Bi- and front belt pieces with the rounded ends

level Topstitch Foot and thread the machine illu 6 right side together. Fold down the extended with purple embroidery thread. Sew the taffeta strip to avoid the strip being caught illu 13 illu 8

taffeta strip in place with a 3/8" (6 cm) illu 11 in the . Sew around the seam on both sides of the strip. edges and leave open the bottom end. the seam allowance and turn right side out. yy Thread your machine with white rayon Press. thread on top and in the bobbin and illu 9

snap on the Sewing Star foot. Sew 2 rows illu 3 of stitch 121 on the taffeta strip, each 6” (15cm) long and spacing the rows approximately 3/8" (0.75 cm) apart. 4 3/4” (12cm) illu 7 illu 4 illu 12

illu 8 illu 9 yy Continue to sew the belt half without illu 9 illu 10 buckle in the same way. Change to Bi- level Topstitch foot and topstitching needle. illu 10

Thread the top of the with 2 3/8” topstitch thread and sewing thread in the (6cm) 1,5” (4cm)

illu 12 bobbin. Sew a around the edge on both belt pieces. Sew an 6 ” (15 cm) seam or use a three step zigzag on the short open ends.

yy Slide on the embroidery unit. Thread illu 10 your Pfaff® embroidery machine with embroidery thread on top and in the bobbin.

Insert an embroidery needle and attach 1,5” (4cm) the embroidery foot. Choose embroidery # 79 and decrease the size down to 80%. Embroider the design as illustrated. illu 13 illu 8 illu 11

yy Slide the taffeta strip into the buckle and fold the strip over to the backside of the denim illu 12 belt. Sew the strip end in place by hand. 1,5” (4cm) illu 11

yy Remove the embroidery unit. Snap on the

Sewing Star foot and change to white illu 9 rayon thread on top and in the bobbin and continue to sew two rows of the decorative stitch on the right side of the embroidery. Construction the belt

illu 12 yy the embellished purple denim pieces to the measure 5 ½" x 22" (14 x 56 cm). yy For the belt half with buckle the back illu 10

illu 13 creative™ 2.0 Belt 3 1,5” (4cm) illu 8 illu 9 illu 10

illu 8 illu 9 illu 10

yy Overlap the belt front ends with 1 ½" (4 cm) and mark the position of the buckle prong and place one eyelet there. Place two more eyelets to the left of the first one, each spaced ½" (12 mm) from the previous eyelet. illu 12 1,5” (4cm) illu 11 illu 12 1,5” (4cm) illu 11

illu 13 yy Pin the left and right belt pieces right sides illu 13together and sew the centre back seam together. Press the seam allowance open.

Embellishing Use the Decorative Touch Applicator to embellish the embroidery design on the belt with Swarovski Crystals. Finished!

creative™ 2.0 Belt 4