<<

Toulouse Wardrobe Important Retain for future reference: Read carefully Please read the instructions and warnings carefully before use to ensure safe and satisfactory operation of this product. Your child’s safety is your responsibility. If you have a query with this product or require replacement parts, please contact 01692 408802. Lay out the parts on a soft level surface and compare to the part/fixing checklist on pages 2 and 3. Do not discard any packaging until you are sure that you have all the parts. Keep children clear during assembly as pack contains small parts which may present a choking hazard. You will need the following tools to complete assembly: Cross-point screwdriver.

Hardware

A x 4 B x 14 C x 15 (50mm) (45mm) (25mm)

D x 32 E x 14 F x 6

G x 9 H x 12 I x 76 (25mm) (15mm) (12mm)

J x 2 K x 2 L x 6

Hexagon Key x 1

2 Wooden Parts Trim Panel

Wardrobe Side x 2 (L & R) x 2

Top Panel

Rear Crossbar (With Holes) x 2

Centre Rear Crossbar

Plain Crossbar (Wide) x 2

Clothes Rail x 2 Front Crossbar

Plain Crossbar (Narrow) x 2 Back Panel (Small) x 2

Back Panel (Large) x 2

Shelf

Drawer Brace Drawer Side x 2 (L & R)

Drawer Back Drawer Front

Drawer Base

3 Assembly 1 Rear Crossbar (With Holes) x 2

Plain Crossbar (Narrow) x 2

Plain Crossbar (Wide)

Front Crossbar

Centre Rear Crossbar

NOTE: Take care to insert the dowels D x 16 into the correct holes as indicated. Repeat for the opposite end of each part. (Total 32 x part C)

Assembly 2 Plain Crossbar (Wide) Rear Crossbar (With Holes)

Plain Crossbar (Wide) Plain Crossbar (Narrow) Plain Crossbar (Narrow) Front Crossbar Centre Rear Crossbar

Rear Crossbar (With Holes)

B E Wardrobe Side 7 locations

NOTE: Fit "Rear Crossbar (With Holes)" and "Plain Crossbar (Narrow)" with the larger recessed hole toward the feet of the wardrobe.

4 Assembly 3 Wardrobe Side

B

E

7 locations

Assembly 4 Shelf

A x 2

C x 6

5 Assembly 5

Trim Panel

C x 3

Top Panel

Assembly 6

Top Panel

A x 2

C x 6

6 Assembly 7

Back Panel (Small)

Back Panel (Large)

I x 76

Back Panel (Large)

Back Panel (Small)

NOTE: This stage is best carried out with the Wardrobe laid on its front on a soft surface. 1. Place each Back Panel into the recess on the back of the Wardrobe in the positions shown in the diagram. 2. Secure each Back Panel in place with screws I.

7 Assembly 8

G x 4

Drawer Side

Drawer Front

Drawer Side

Assembly 9

Drawer Base

Assembly 10

Drawer Back

Drawer Brace

8 Assembly 11

F x 4 J x 2

G x 5

Assembly 12

Clothes Rail

Clothes Rail

Completed Drawer

9 Assembly 13

The wardrobe is supplied with a fixing kit which will secure it and help to guard against accidental tipping. WARNING : Installation only to be carried out by a competent person. Check the suitability of the before fitting.

Washer x 2 Screw (15mm) Screw (25mm)

Plastic wall plug (for brick and masonry wall use only) Fabric strap

1. Place the wardrobe against the wall where it is to be fitted. Mark the wall at the centre of the top edge of the wardrobe. Move the wardrobe away. 2. Using the 25mm screw, washer and the appropriate wall fixing, attach the fabric strap to the marked position. 3. Re-position the wardrobe. Attach the strap to the top of the wardrobe using the 15mm screw and the washer. 4. Proceed to Assembly 14 to fit and adjust the . Before use, ensure that the strap is securely fixed to both the wall and the wardrobe.

1 2 3

The type of wall fixing you will require depends on the construction of the wall. See below for details. If in doubt, seek professional advice:

Wood: If fixing to wood make Brick or masonry: Use the Cavity wall: Special toggle sure that it isn’t chipboard as wall plug, provided you are wall plugs needed. screws can easily pull away sure that your wall is sound. Seek expert advice. the core structure.

10 Assembly 14

L (3 total)

K x 1 H x 2 (6 total)

NOTE: F x 1 Door Repeat for second Door.

Assembly 15

Screw 1

1.

2. Screw 2

NOTE: To adjust the fit of the doors in the frame, position the wardrobe where it will be used and use screws 1 and 2: Screw 1 loosens the hinge to move the door forward or backward. Screw 2 moves the door closer to, or further from the frame.

11 Care & Maintenance

Your may be cleaned by wiping with a damp cloth and drying with a soft clean cloth.

Do not use abrasives, bleach, alcohol or ammonia-based household polishes.

Take care when handling or moving the furniture. Careless handling may cause damage.

Regularly check that all fixings are tightened and that there are no broken or damaged parts.

In use

All assembly fixings should always be tightened properly.

Be aware of the risks of open fires and other such sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the wardrobe.

Do not use if any of the parts are broken, torn or missing.

Any additional or replacement parts can only be obtained from the manufacturer or the distributor.

Only use the wardrobe on a stable and level surface.

Ensure that the wall strap is used to securely attach the wardrobe to the wall to prevent tipping.

Customer Care line for this Product 01692 408802

East Coast Ltd. Robertson , North Walsham, Norfolk, NR28 0BX www.eastcoastnursery.co.uk

7840-03