DOCSLIB.ORG

How to Install Your Standard Sized Sliding Doors

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
How to Install Your Standard Sized Sliding Doors Fitting Standard Door Instructions www.hdhc.com STANDARD SIZED SLIDING DOORS UK_STD_HD06.14 Sizing the Tracks HOW TO INSTALL YOUR STANDARD Measure the width of the top of your opening. Using a 1 set square mark a straight line across the Top Track A. 4 SIZED SLIDING DOORS Measure the width of the base of your opening. Mark a Installing the Doors corresponding line across the Floor Track B. Cut Always locate the back Read carefully through these instructions before you start the tracks using a fine tooth hacksaw door/s first. Angle the door and insert the top of the PLEASE READ before starting assembly. Carefully open the packs supplied and check the contents against the parts door into the top track. and fittings check list. Do Not dispose of the packaging until you are certain that you have all the necessary parts for the Width of opening Straighten the door and assembly. The manufacturer reserves the right to alter specifications without prior notice. lower the bottom wheels into the Floor Track grooves. IMPORTANT NOTES: 1. Please ensure that the packaging is disposed of in a safe environmentally friendly way. 2. There are small components used in the construction of the door frame. These loose items should be kept away from A young children whilst assembling. A 3. Protect the high finish of the tracks by using a suitable material on the working surface during assembly. B Engaging the Top Guide B Twin pack 4. We recommend that two people carry out this assembly. (Not Applicable to Twin pack doors) 5. Make sure there are no pipes or cables where you are drilling. trackset only (1200mm) 5 Installing the Tracks Identify and, if necessary, construct the correct opening width for your doors using the table below and Push up white plastic Top Track - Position the Track into the top of the instructions A to E shown on the back page. section of the guide to 2 opening. Mark where holes need to be drilled in the track All Doors are made to fit a standard opening height of 2260mm. A higher ceiling can be reduced using Spacer Blocks engage into top track. To (we recommend a fixing at each end and centre then at or Opening Height Reducers as shown in section E on the back page. remove door from top track approx 500mm intervals in between). Drill and plug the pull down on top guide as header/ceiling in line with the holes drilled in the track and shown. The guide will then fix the top track using the long screws provided (see back disengage from top track. page for suggestions). Lift out at an angle. We provide these components with your Wardrobe A Top Track * Doors and Track-Set. Components marked with * are supplied in the Track-Set. The Top Guides and Bottom Wheels are pre-fitted to the Wardrobe Doors. Normally a minimum of 6 593mm if used as a wardrobe Adjusting the Doors Align the doors so the end Sliding Door doors are plumb to the side (either Mirror or walls. Adjust the bottom panel) complete wheels using a pozidrive with all framing screwdriver, altering the height & hardware and angle of each door. Turn the screw clockwise to raise the door and anti-clockwise to Xmm lower the door. Floor Track - Position the track on the floor of the opening. Mark where holes need to be drilled in the track (we recommend a fixing at each end and centre then at regular intervals in between). Before Engaging Anti-jump Clips permanently fitting the floor track to your floor, fit the door into place 7 Clips must be engaged to ensure doors do not and using a spirit level adjust the Floor Track so the door becomes leave tracks. B Bottom Track * vertical. Positioning the Doors (Not Applicable to Twin pack doors) You will also need: Pozidrive screwdriver, Hacksaw, 3 Tape measure, Bradawl, Spirit level, Electric drill, Drill Position your doors in the appropriate combinations bits and suitable wall plugs. shown below, to allow for overlapping. A Rotate B Push C Rotate 2 Doors anti-jump clip anti-jump clip fully anti-jump clip back into open position down into track into closed position 3 Doors To disengage anti-jump clip just reverse procedure. Note: In the unlikely event of anti-jump clip becoming detached during engagement, simply snap it back into original position 4 Doors shown on drawing A. Fitting Standard Door Instructions www.hdhc.com STANDARD SIZED SLIDING DOORS UK_STD_HD06.14 HOW TO CONSTRUCT YOUR OPENING WIDTH HOW TO CONSTRUCT YOUR OPENING HEIGHT Fitting to the wall Fitting Wall to Fitting Wall to Fitting Floor to Ceiling Fitting Floor to Ceiling A B side fillet C end panel D Height 2260mm E Height Over 2260mm Opening width Openingwidth Openingwidth Openingheight Opening height (Selected from table) (Selected from table) (Selected from table) 2260mm /89” 2260mm /89” The use of end fillets is recommended to allow To reduce your opening width from between To stop the doors short of an obstructionsuchas The Top & Bottom Tracksets can be fitted directly If your ceilingheightis between 2272 - 2399mm the doorsto slide flush where an existing skirting 127 - 457mm /5-18” on each side you can awindow or door, construct areturn endpanel to your ceiling and floor using appropriate fixing, /89 ½”- 94 ½” use Spacer Block to reduce it to board is fitted. Remove a section of the skirting use Opening Reducers fixed to the side wall. from melamine faced chipboard. Cuttofit the which you can buy from any good DIY center. 2260mm/89”. Detailed instructions are and fit an end fillet. Detailed instructions are provided with each exact ceiling height and scribe back edgetofit provided with each Spacer Block pack. Opening Reducer. rear wall and skirting. If in doubt about the strengthof the fixings, Min. of Fix return end in position with Fixing Blocks usethe methods below. Irregularities of plus 25mm (1”) equally spaced. or minus 12mm are automaticallycompensated Ceiling Opening by thetop guide. Fascia Side Reducer Wall A For tracks running at min. of 593mm right angles to the joists, Top track Min.of Floor Track make holes in the track 102mm (4”) in line with the joists to screw into the joists. B For tracks running in Fascia line with the joists, make Back holes at regular intervals in the track and screw To reduce your opening width by up to 127mm / To reduceyour opening by more than 457mm / Wall Openingheight into the joists. 5” on each side use Spacer Blocks together 18” on each side you can construct an ‘L’ 2260mm (89”) with the end fillet and appropriate infill. Detailed section using an end panel and end fillet. CFor tracks between instructions are provided with each Spacer Jointed together with Fixing Blocks and scribed For ceilings between 2399–2729mm /94 ½”– Normally amin. joists;fixnoggins Block pack. to fit thewall and skirting. of 593mm if used between thejoistsand 107 ½” use Opening Reducers.Detailedfixing as awardrobe. screw intothe noggins. instructions are provided with each Reducerpack. Fixing Any number Scribe end Blocks DFor lathe and plaster; of Spacer fix cantilever battens panelto wall Ceiling Ceiling Blocks and around directly to theceiling and maybe skirting screw intothese. OHR interlocked EFor tracks fixing to a Fascia OHR solid ceiling; drill and Infill Fixing screwdirectly to the thickness Blocks Fascia Floor Track ceiling. FFix floor trackdirectly Top track End fillet on topofthe carpet or floor covering usingthe Opening height short screws provided or 2260mm (89”) double sided tape. *Please Note: Illustrations are not to scale. Products may vary slightly to what is shown, but basic fitting instructions will apply to all..
Load more

Recommended publications
  • Product Catalog | Volume 2 | Volume Catalog Product
    Product Catalog | Volume 2 Catalog | Volume Product Hirsh® Product Catalog | Volume 2 Advantages Of Hirsh Products Hirsh Industries, LLC manufactures and supplies metal filing, storage and organizational products for personal and commercial use. We have a storage solution for any office need. Our products work together to provide a comprehensive, functional and stylish storage system. Hirsh has had an aggressive growth strategy through investment and expansion both organically as well as through acquisitions. Our expanding portfolio of value engineered products have applications in government, education and business markets. We pride ourselves on providing quality products that represent outstanding value to end users, supply chain excellence and world class customer service. Founded In 1924 A Broad Assortment Of Products Hirsh Industries has Commercial Grade File Cabinets operated continuously Hirsh’s commercial grade filing products offer premium features and unmatched value. since 1924 when it With added functionality and ergonomic design, these cabinets are welcome additions began as the W.P. to any office. All of our cabinets are built of steel and feature ball-bearing slides providing a long-lasting and durable product made for high-volume, daily use. Hirsh’s broad line of Johnson Company file cabinets include vertical, lateral and pedestal files. Affordable prices make these filing which specialized in products a great value and smart choice. Unmatched Value Quality Construction Premium Features metal fabrication. W.P. Johnson eventually Credenza Cabinets For small or large offices, the combination of our credenza cabinets offer a variety of open Practical solutions with Durable desking and Thoughtful designs narrowed its focus and closed configurations that support accessible and secured storage solutions.
    [Show full text]
  • Mughal Warfare
    1111 2 3 4 5111 Mughal Warfare 6 7 8 9 1011 1 2 3111 Mughal Warfare offers a much-needed new survey of the military history 4 of Mughal India during the age of imperial splendour from 1500 to 1700. 5 Jos Gommans looks at warfare as an integrated aspect of pre-colonial Indian 6 society. 7 Based on a vast range of primary sources from Europe and India, this 8 thorough study explores the wider geo-political, cultural and institutional 9 context of the Mughal military. Gommans also details practical and tech- 20111 nological aspects of combat, such as gunpowder technologies and the 1 animals used in battle. His comparative analysis throws new light on much- 2 contested theories of gunpowder empires and the spread of the military 3 revolution. 4 As the first original analysis of Mughal warfare for almost a century, this 5 will make essential reading for military specialists, students of military history 6 and general Asian history. 7 8 Jos Gommans teaches Indian history at the Kern Institute of Leiden 9 University in the Netherlands. His previous publications include The Rise 30111 of the Indo-Afghan Empire, 1710–1780 (1995) as well as numerous articles 1 on the medieval and early modern history of South Asia. 2 3 4 5 6 7 8 9 40111 1 2 3 44111 1111 Warfare and History 2 General Editor 3 Jeremy Black 4 Professor of History, University of Exeter 5 6 Air Power in the Age of Total War The Soviet Military Experience 7 John Buckley Roger R.
    [Show full text]
  • Asuka Wardrobe
    Asuka Wardrobe Stock numbers 803/13907 Thank you for purchasing this Asuka wardrobe, please read this instructions carefully before use to ensure safe and satisfactory operation of this product. This item is Heavy, Necessary tools Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the retailer from whom you bought this product. This product is HEAVY, it should be assembled as near as possible to the point of us e. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product. This product takes approximately 40 MINUTES to assemble with 2 PEOPLE. The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN. Fittings and parts checklist 1 Door frame x 1 C 2 Side panel left x 1 15mm Screws x 20 3 Side panel right x 1 D 4 Middle panel x 1 Hanging rail support x 6 5 Top panel x 1 E 6 Bottom panel x 1 Brackets x 2 & strap x 1 7 Back panel x 1 F 8 Shelf panel x 1 Wedges x 2 Long Hanging rail x 2 A Short Hanging rail x 1 30mm Screws x 60 G/H B Shelf upport x 4 Step by step assembly instructions 1. Using the screw C to fix the hanging rail support D to the inside of right and left panels and the middle panel as shown below.
    [Show full text]
  • OFFENHAUER TOWERS HALL FURNITURE DIMENSIONS the Dimensions Listed Below Are for the Majority of the Furniture in This Residence Hall
    OFFENHAUER TOWERS HALL FURNITURE DIMENSIONS The dimensions listed below are for the majority of the furniture in this residence hall. If furniture was damaged in the past, different furniture than described could have replaced the furniture in your room. OFFENHAUER HEIGHT DEPTH WIDTH Bed - All beds are the same size in every residence hall. Beds come fully lofted (58” under the bed) and can be lowered to the lowest setting (19.5” under the bed). See Notes 36” 80” Offenhauer Desk & Hutch (Hutch not available in Economy Triples or Quads) - Desk 30" 28" 42" - Entire Desk Drawers 30" 28" 12" - Top 2 Drawers 4.5" 16" 12" - Bottom Drawer 6" 16" 12" - The entire Hutch 30" 11" 34" - Hutch Bottom Shelf 13" 11" 34" - Hutch Top Shelf 13" 11" 34" Offenhauer Double Room Wardrobe - The entire wardrobe (floor to ceiling, width and depth) 70" 24" 35" - Wardrobe section for hanging clothes 57" 22" 34" - Side-by-side bottom drawers (2) 9" 16.5" 15" Offenhauer Single Room Closet - The entire Closet (floor to ceiling, width and depth) 90" 15" 70" - Closet section for hanging clothes (two sections to hang clothes) 70" and 56" 10" 68" - Closet shelf to top 23" 10" 68" Offenhauer Dresser - Entire Dresser 30" 19.5" 29.5" - Top 3 drawers 6" 14.5" 25" Please note: These measurements were taken by hand and could be off slightly. These dimensions are provided for planning purpose. If you are purchasing something that you need guaranteed measurements for, we recommend making your purchase after you arrive to campus. WINDOWS | We do not provide window dimensions.
    [Show full text]
  • Spring Clean YOUR LIFE
    VOL 14 NUMBER 3 HOUSE SENSE MOTIVATION OUTDOOR SPRUCE UP Spring Clean YOUR LIFE The snow and ice have melted, but this winter’s Do you want more out of life, more money, fun & adventure, a better wild storms have left yards across the country in social life, perhaps a new romantic partner, good health, career need of a major spring-cleaning. success? If you do you are going to have to make space; A BIG SPACE. 1. Remove the debris. If the winter’s seemingly Have you ever wandered into a new show house or apartment and incessant wind, rain, and snow have done lusted after the Zen like peace and tranquillity that seems to ooze a number on your trees, start your clean-up from the open spaces, clutter free surfaces, immaculate bathrooms efforts by collecting the fallen branches and and thought if you could just move in there, life would be perfect? scattered sticks. Rent a wood-chipper from any Chances are if your present home is in clutter, your life is too, garden or hardware store and turn your debris simple as that. The problem with clutter is that it’s clogging into mulch. up your life like plaque on your teeth. You might 2. Rake dead leaves and twigs. Last year’s well be aware of the need to detoxify your body leaves will make great compost, but not if they but what about your living space? keep the grass from absorbing sunlight. What exactly is clutter? It’s the physical and Thoroughly rake the yard and garden beds.
    [Show full text]
  • Wardrobe Components
    Wardrobe Components 4× Wood Supports 2× Fixed Shelves 1× Shelf 1× Wardrobe Bar Components cont. 2× Wardrobe Brackets 1× Hex Tool 16× Bolts 16× Nuts 8× Felt Pads (for bottom of wood supports) Wall Anchor Kit Components 1× Wall Anchor Bracket 2× Screws 2× Drywall Anchors 2× Velcro Tape Straps (choose black or white) Additional items you may need for installing the Wall Anchor: 1× Phillips Head Screwdriver 1× Hammer 1× Drill w/ 1/4” Drill Bit Assembly Tips: – Keep all packaging until assembly is complete to ensure you have all parts needed for assembly. – Assemble on a soft surface, like a rug or cardboard to protect the finish. – Two people are recommended for assembly. – If your floor is uneven, you can use the provided felt pads to level your Shelving System. The felt pads can be stacked on top of each other to add more height on one or more Wood Supports as needed. – WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. The Wall Anchor Kit should be installed to help prevent tip-over for the Tall Shelf, Wardrobe, and Display Shelf. a a Place one fixed shelf (a) 1with its back edge on the Position floor and have a friend hold in place. Place two wood the first supports on either side of the fixed loop with the fixed metal part facing down. The bottom end of the wood shelf supports have a notch cut in the wood. Align the holes at the bottom end of the wood support with the square holes on the fixed shelves.
    [Show full text]
  • Thebungalows Brochure.Pdf
    Welcoming, fresh and modern, The Bungalows at Terra Vista invites you to tread your own path and discover a place that’s a reflection of you. It’s charming detached bungalows and single-level flats and spaces that inspire. Where you’ll find your center poolside at the clubhouse. Take the short walk to meet up with new and longtime friends for shopping and lunch at a nearby bistro. It’s making time to get out on the trails or to take in the sunset from nearby Mt. Baldy. There’s a sense of connection to the world around you, and life here just feels more vibrant. WHY VAN DAELE? Van Daele Homes is a family-owned company that builds for YOUR Street, not Wall Street. Unlike most others, we are not a publicly owned conglomerate answering to stockholders. YOU are our stockholder. We answer to YOU. This is just one of the many reasons the Building Industry Association of Southern California has honored us as BUILDER OF THE YEAR. OUR FOUR POINT PLEDGE TO YOU OUR SALES PHILOSOPHY Van Daele sales counselors are here to counsel you and to help you in any way they can. 1 They are seasoned professionals who are committed to looking out for your best interests. They will answer all your questions, assist you with all your needs and make sure you’ll feel good about your new home. Our sales counselors consistently score 93% or higher on customer satisfaction surveys. YOUR LOAN We include the services of loanDepot as our “lender partner.” They are our “lender 2 partner” because of the proven service and value they bring to our homebuyers.
    [Show full text]
  • SCILA & Trillium Kitchens Vigo Wardrobes
    SCILA & Trillium Vigo Wardrobes Kitchens Neo Alchemy Build India LLP Neo Alchemy Build India LLP Kitchens are sure to be the most impressive highlights in your home. Not just a well-designed area that adds value to your home, but goes miles to meet your lifestyle and exudes your personality. Family living and entertaining starts & ends in the kitchen – cooking meals, sharing good times or simply catching up with friends. An ideal kitchen is one that looks, feels and absolutely belongs, a kitchen that evolves with your changing needs and lifestyle Create your ideal kitchen with Scila & Trillium Range of Kitchens from Neo Alchemy Straight kitchens Straight kitchen layout A modern residential kitchen is typically equipped with a stove, a sink with running water. A Straight Kitchen is built only on one side of the wall with all the work areas facing on one side. Compact and Stylish, Single-wall kitchen plan is an intelligent design solution with provisions for storage, cooking and washing areas along a single wall. Parallel kitchens parallel kitchen layout The parallel shape modular kitchen also recognized as the passageway style of kitchen, in this design you can have your appliances, cabinets and sink on two parallel walls to make a minute way between two sets of cabinets in your kitchen. U shape kitchens U shaped kitchen layout A u-shaped kitchen is a kitchen design that features three walls that are lined with cabinets and appliances. It is an efficient design that frees up floor space. A u-shaped kitchen is a kitchen that maximizes the wall space by using the walls for cabinets and appliances.
    [Show full text]
  • Download PDF/Brochure
    the perfect fit for your company KLOTH STUDI CONTACT Nasir Walji O CEO Kloth Distribution America, LLC Office 713-255-3143 Ext: 24 [email protected] Shabir Walji Executive V.P. Kloth Distribution America, LLC Office 713-255-3143 Ext: 22 [email protected] FACTORY CERTIFICATIONS Gold Certificate of Compliance WRAP Worldwide Responsible Accredited Production CERTIFICATE OF RECOGNITION ACCORD Fire & Building Safety bangladeshaccord.org WHY KLOTH | 1 the perfect fit for your company. Kloth Studio is a design-driven KLOTH STUDIO manufacturer of bespoke uniforms for fashion-minded organizations. We help teams realize their professional image through a collaborative design process that uncovers styles authentic to your brand and people. Distinct, thoughtful, and sophisticated. The kind of clothes that could just as easily fit into your home wardrobe. We love looks that turn heads. Teams thrive when they look and feel empowered. We’ll dress yours with the kind of confidence you simply can’t find from an “off-the-shelf” solution. Together, we’ll find the perfect fit. WHO WE ARE | 2 why kloth unlimited creative KLOTH STUDIO potential no minimums uncompromising quality outstanding service WHY KLOTH | 3 we bring your brand’s KLOTH STUDIO DNA to life. Your team is our inspiration. Whether you’re an established company looking for premium brand-aligned apparel or starting something completely new, our experienced designers & premium manufacturing experts will build a professional identity you’ll be proud to portray. WHY KLOTH | 4 how we work 01 First, we need to understand your brand. We do this through an in-depth discovery session exploring your team’s values, target market, logistical considerations, Discovery and the image you want your people to project.
    [Show full text]
  • Resident Room Casegood Collections
    Contact your Basic American representative to schedule a showroom visit so that our designers can recommend a collection that will make your project feel like home for your residents. Basic American ‑ Your complete extended care design solution RESIDENT ROOM COLLECTIONS palette Color variations may occur due to monitor or printer settings. 1.770.368.4700 Information contained herein is subject to change without notice. The most current and complete product information can be found on our website. © 2019, GF Health Products, Inc. All Rights Reserved. www.grahamfield.com Basic American Medical Products is a trademark of GF Health Products, Inc. GF Health Products, Inc. is an ISO 13485 Certified Company. is your solution! Our team is backed Totalby knowledgeable Design territory managers, accredited designers, & dedicated project managers who are there every step of the way. We take pride and specialize in assisting customers in the Senior Living space. At Basic American, we are always up to date on state and local code requirements and best of all – our resident room furnishings are proudly made in the USA. The Total Design experience enables you to maximize your investment when it comes to your facility. 3DL Thermoformed Casegood Collections When form and functionality are equally important, 3DL Thermoformed Casegoods combine pleasing aesthetics with durability. We offer 9 collections of 3DL high performance surfaces that provide greater resistance to moisture and bacterial penetration and are more resistant to denting, cracking, scuffs and chipping. Any of these collections are available in any of our standard 3DL finishes. Whether it’s special sizing or mandated requirements, all of our casegoods are customizable to meet state guidelines and regulations.
    [Show full text]
  • Living on Campus Webinar Slides
    Welcome to your virtual Residential Education Experience! We are: • Lindsay Barndt, Director of the Office of Student Transitions • Tina Tormey, Director of Residential Education And we also have some Student Orientation Leaders to answer some of your questions today. • Ellie, Junior, Elementary Education & History, Allen Hall • Rupak, Junior, Marketing, Wolfe Hall • Nicole, Senior, Marketing, Travers Hall CONTACT INFO FOR QUESTIONS AFTER TODAY: [email protected] Why Live On Campus? Multiple national studies have found that living on campus has both significant social and academic benefits. Specifically: • Residential students tend to have higher quality social interactions than commuters. It is easier for students to meet people and create new friendships. • Students are able to more easily form study groups. • Seniors who live on campus were more engaged with advisors and faculty than their off-campus peers. • High quality interactions between students and peers or students and their faculty are linked with better academic engagement and success. • Easier access to campus events and programs—and getting involved in the student organizations that run many of them— provides great co-curricular opportunities that provide an out of classroom learning experience AND can be translated into future job skills. Why Live On Campus? Where do first year students live? Travers Wolfe ABE Centennial Norsworthy Commonalities • Each student will have a bed, dresser, desk, desk chair & wardrobe (or closet) • All have WiFi • Every building has at least one lounge • All have community bathrooms • None have air conditioning • All buildings have FREE laundry facilities • All buildings have vending machines for drinks & snacks • Most rooms are doubles • Small number of singles and quads Allen, Brewster & Ely Halls (ABE) Part of our “Lakeside” complex which borders the campus loop and overlooks Lake Sylva.
    [Show full text]
  • Wardrobe Doors
    The Series 100 Frameless sliding mirror doors/ steel system Wardrobe A frameless economical answers that will be sure to beautify its surroundings. Available with 1/2” or 1“ beveled options. Safety backed mirror to Door ensure high quality, non-distorting images. A steel frameless door that maximizes its mirror surface while minimizing hardware. Experience. Series 150 Frameless sliding mirror doors/ Chaparral has the most complete and comprehensive aluminum system The aluminum frameless doors is the line of mirror doors available today. Our products can be overwhelming choice for high end projects. Unsurpassed in elegance and distinctive design. found in some of the most beautiful award winning model Non-distorting images. Available with 1/2” or 1“ beveled options. Premium grade aluminum to homes that the building industry has to offer. In addition ensure a high quality finish. to beauty, we also offer tremendous durability as the Series 150BF Frameless mirrored bifold doors/ products of choice by numerous hotels and luxury resorts aluminum system This aluminum frameless bifold gives you full around the world. advantage of your closet opening. Available with 1/2” or 1“ beveled options. A frameless bifold that maximizes its mirror surface while minimizing hardware. Series 205C Semi-Frameless 6 raised panel sliding doors/ steel system A classic look at an affordable price. Raised 6 panel door skin with 4 coat process. Well constructed doors made from the finest materials. Nylon rollers to ensure rolling performance. Series 205BF Semi-frameless bifold doors/ steel system A creative answer for the opening the doesn't accommodate a bipass system. A steel framed door that has been designed for versatility and durability.
    [Show full text]