Name of the work : Supply and Installation of Modula Kitchen & Wardrobe in faculty Housing at Permanent Ccmpus of IIM Udaipur Subject: Bill OF Quantities Sr. No Quantity Description of Item Unit Rate (Rs) Amount(Rs) 1.000 28.00 drawings. Vendor shall prepare a detailed shop drawing considering actual site dimensions with provision for all Set required services (Eg. Electrical, Plumbing, Gas, Chimney Exhaust,etc..) The Kitchen shall comprise the following items: a. Plywood: BWP Grade Architect Ply as per IS-710 (Greenply, Century) b. Laminate: Shutter: 1.0 mm High Gloss Laminate. Insife: 0.8 mm Laminate c. Cabinets - Required Cabinets as per Drawing. d. Partition covering kota stone: 6mm ply with 0.8mm laminate on outside d. Drawer System - NOVA Sleek/DWD GRASS including all accessories. e. Hardwares: Soft Close hardwares from Sleek/ Hettich / Blum. f. Drawer storage organizer:Plain Tray, Cutlery Tray, Anti Slip mat in all drawers and cabinets, Rount DustBin, Cargo Plus Thali. All items are from Hettich. g. Profile Handle for shutters and drawers: Aluminum Profile handle (G Type) from Hettich as selected by Architect

All shutters shall have PVC Edge Bands on all four sides. Finish of PVC Edge band shall as per architects selection. The modular kitchen shall have a 5 Years Warantee against Manufacturing defect. The work shall be complete including all the required accessories for fixing the kitchen at site as per drawing and to the satisfaction of Architect.

1 Name of the work : Supply and Installation of Modula Kitchen & Wardrobe in faculty Housing at Permanent Ccmpus of IIM Udaipur Subject: Bill OF Quantities Sr. No Quantity Description of Item Unit Rate (Rs) Amount(Rs) 2.000 30.00 Set Supply and Installation of Factory Made Modular kitchen (Type-2) for Staff Residences Kitchen as per schematic drawings. Vendor shall prepare a detailed shop drawing considering actual site dimensions with provision for all required services (Eg. Electrical, Plumbing, Gas, Chimney Exhaust,etc..) The Kitchen shall comprise the following items: a. Plywood: BWP Grade Architect Ply as per IS-710 (Greenply, Century) b. Laminate: Shutter: 1.0 mm High Gloss Laminate. Insife: 0.8 mm Laminate c. Cabinets - Required Cabinets as per Drawing. d. Partition covering kota stone: 6mm ply with 0.8mm laminate on outside d. Drawer System - NOVA Sleek/DWD GRASS including all accessories. e. Hardwares: Soft Close hardwares from Sleek/ Hettich / Blum. f. Drawer storage organizer:Plain Tray, Cutlery Tray, Anti Slip mat in all drawers and cabinets, Rount DustBin, Cargo Plus Thali. All items are from Hettich. g. Profile Handle for shutters and drawers: Aluminum Profile handle (G Type) from Hettich as selected by Architect

All shutters shall have PVC Edge Bands on all four sides. Finish of PVC Edge band shall as per architects selection. The modular kitchen shall have a 5 Years Warantee against Manufacturing defect. The work shall be complete including all the required accessories for fixing the kitchen at site as per drawing and to the satisfaction of Architect.

2 Name of the work : Supply and Installation of Modula Kitchen & Wardrobe in faculty Housing at Permanent Ccmpus of IIM Udaipur Subject: Bill OF Quantities Sr. No Quantity Description of Item Unit Rate (Rs) Amount(Rs) 3.000 12.00 Set Supply and Installation of Factory Made Modular kitchen (Type-3) for Visiting Faculty Residences Kitchen as per schematic drawings. Vendor shall prepare a detailed shop drawing considering actual site dimensions with provision for all required services (Eg. Electrical, Plumbing, Gas, Chimney Exhaust,etc..) The Kitchen shall comprise the following items: a. Plywood: BWP Grade Architect Ply as per IS-710 (Greenply, Century) b. Laminate: Shutter: 1.0 mm High Gloss Laminate. Insife: 0.8 mm Laminate c. Cabinets - Required Cabinets as per Drawing. d. Partition covering kota stone: 6mm ply with 0.8mm laminate on outside d. Drawer System - NOVA Sleek/DWD GRASS including all accessories. e. Hardwares: Soft Close hardwares from Sleek/ Hettich / Blum. f. Drawer storage organizer:Plain Tray, Cutlery Tray, Anti Slip mat in all drawers and cabinets, Rount DustBin, Cargo Plus Thali. All items are from Hettich. g. Profile Handle for shutters and drawers: Aluminum Profile handle (G Type) from Hettich as selected by Architect

All shutters shall have PVC Edge Bands on all four sides. Finish of PVC Edge band shall as per architects selection. The modular kitchen shall have a 5 Years Warantee against Manufacturing defect. The work shall be complete including all the required accessories for fixing the kitchen at site as per drawing and to the satisfaction of Architect.

3 Name of the work : Supply and Installation of Modula Kitchen & Wardrobe in faculty Housing at Permanent Ccmpus of IIM Udaipur Subject: Bill OF Quantities Sr. No Quantity Description of Item Unit Rate (Rs) Amount(Rs) 4.00 56.00 Set Supply and Installation of Factory Made Modular Wardrobe ready to assemble type, self-standing for Faculty Residences as per schematic drawings. Vendor shall prepare a detailed shop drawing considering actual site dimensions with provision for following items:

(a) Carcass , shelves : Made of 18 mm thick Marine plywood confirming to IS 710 with 0.8 mm balancing laminate of selected shade on both sides pressed on hot-press with approved adhesive. All the edges must be sealed with 0.8 mm PVC/ABS edgebands, glued on PC controlled automatic Edgebanding machine with pre-milling operation using hot-melt glue. For require quality, plywood must be calibrated ply for uniformity and better bonding with lamination and edgebands must be applied with pre-milling function on.

(b) Shutters: Made of 18 mm thick Marine plywood confirming to IS 710 with 1.0 mm thick high-pressure laminate sheet pressed on a hot-press with approved adhesives, of plain / wood grain in gloss / matt / suede finish with high density protective surface layer conforming to IS : 2046 .All the edges must be sealed with 0.8mm PVC/ABS edgebands, glued on PC controlled automatic Edgebanding machine with pre-milling operation using hot-melt glue. For require quality edgebands must be applied with pre-milling function on.

(c) Back Panel and drawers: Made of 12 mm thick Marine plywood confirming to IS 710 with 0.8 mm balancing laminate of selected shade on both sides pressed on hot-press with approved adhesive. Back side of cabinet in contact with wall plaster/ otta Floor/ bottom of loft slab to be applied with wood primer.

(d) Knock-down Joining System (KD fittings): 8 mm x 45 mm concealed bolt with 15 mm eccentric cranks, 8 mm jute dowels, 75 x 50 mm M.S. brackets, etc. completed with drilling and fixing. Drilling and boring work is done on CNC Multi-drill machine in KD-32 system. All mounting holes are notched in all axes simultaneously in single reference. The maximum span between two adjacent holes should not be more than 96 mm. All panels should be interchangeable to facilitate assembly at site. Panels cannot be connected by brackets or screws. (e) Hardwares: All the Hardware fittings of approved make S. S. 304 grade Satin finish/Brush Finish, drawer channels of approved make, SS hanger road with sockets,locks, magnets etc. all accessories including necessary screws, nuts bolts of matching quality. The Shutters shall be fixed with Soft Close Clip On Hinges, The Drawer Channels shall be corrossion resistant and on ball bearings.

Manufacturer shall prepare one full scale mock up sample as per the drawing and get the same approved by Engineer In Charge / Architect before doing the final istallation for other uniots. Necessary modification in the full scale mock up samples shall be made, if any required by the Engineer In charge/Architect, without any extra cost.( Cost of supplying of all hardwares fittings,channels and accessories etc. are included in the rates of relevant items ). The Rate has to be quotd for the following wardrobes: (a) WD-1 5.00 60.00 (b) WD-2 Set - 6.00 12.00 (c ) WD-3 Set - Total of Work -

4