DOCSLIB.ORG

Trade Marks Journal No: 1901 , 13/05/2019 Class 10 2683109 20

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Trade Marks Journal No: 1901 , 13/05/2019 Class 10 2683109 20 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 WAVE 2683109 20/02/2014 JKC HOLDINGS PRIVATE LIMITED C-1, SECTOR 3, NOIDA-201301, UP MANUFACTURERS AND MERCHANTS A COMPANY INCORPORATED UNDER THE LAWS OF THE REPUBLIC OF INDIA Address for service in India/Attorney address: SIM & SAN ADVOCATES 176 ASHOKA ENCLAVE PART-III, SECTOR- 35, FARIDABAD, HARYANA. Used Since :01/06/1999 DELHI SURGICAL, MEDICAL, DENTAL AND VETERINARY APPARATUS AND INSTRUMENTS, ARTIFICIAL LIMBS, EYES AND TEETH, ORTHOPEDIC ARTICLES, SUTURE MATERIALS. 1450 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 i3 2827944 15/10/2014 YUVRAJ BIOBIZ INCUBATOR INDIA [P] LTD. 1/1 [B], ANNUPARAPALAYAM POST, AVINASHI MAIN ROAD, TIRUPUR-641 652, TAMIL NADU. MANUFACTURER AND MERCHANT A COMPANY DULY REGISTERED UNDER THE COMPANIES ACT. Address for service in India/Agents address: L.R. SWAMI CO. NO. 3 PLAYGROUND VIEW STREET, NANDANAM EXTN., CHENNAI - 600 035. Used Since :01/09/2014 CHENNAI DIAGNOSTIC APPARATUS FOR MEDICAL PURPOSES; SURGICAL, MEDICAL, DENTAL AND VETERINARY APPARATUS AND INSTRUMENTS, ARTIFICIAL LIMBS, EYES AND TEETH; ORTHOPEDIC ARTICLES; SUTURE MATERIALS. 1451 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 2830345 21/10/2014 SURGIMEDIK HEALTHCARE INDIA PVT LTD 53 CD, KANDIVALI INDUSTRIAL ESTATE, CHARKOP, KANDIVALI (WEST), MUMBAI-400067 MANUFACTURER A PRIVATE LIMITED COMPANY Used Since :06/01/2009 MUMBAI SURGICAL AND MEDICAL INSTRUMENTS AND APPARATUS 1452 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 3054635 13/09/2015 MR. SAJI EAPEN trading as ;M/S. SS DENTAL & SURGICALS, DELHI-110096 46-F, POCKET, A/1, MAYUR VIHAR, PHASE-III, DELHI-110096, INDIA Manufacturer and Traders Address for service in India/Attorney address: BALAJI IP PRACTICE E-617 STREET NO- 11&12 WEST VINOD NAGAR I.P. EXTN. NEW DELHI-110092 Used Since :02/09/2015 DELHI Dental & Surgical Instruments. NO EXCLUSIVE RIGHT OVER THE "PLUS".. 1453 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 YOG GURU BABA RAMDEVJI 3112499 02/12/2015 PATANJALI AYURVED LTD D-38 INDUSTRIAL AREA HARIDWAR-249401 MANFACTURER & MERCHANT Address for service in India/Agents address: BANSAL & COMPANY 210, JOP PLAZA, { OPP.MC DONALD"S} P-2, SECTOR-18, NOIDA-201 301, NCR DELHI. {INDIA } Used Since :31/12/1996 To be associated with: 3108459, 3108513, 3108572, 3108617, 3111775, 3111820, 3112387, 3112432 DELHI SURGICAL, MEDICAL, DENTAL AND VETERINARY APPARATUS AND INSTRUMENTS, ARTIFICIAL LIMBS, EYES AND TEETH; ORTHOPEDIC ARTICLES; SUTURE MATERIALS. 1454 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 PATWASHAH 3137712 23/12/2015 DR. APEKSH PATWA trading as ;DR. APEKSH PATWA B - 31,32,KAILASH PARK DUPLEX,AKSHAR CHOWK,O.P. ROAD,VADODARA - 390007,GUJARAT,INDIA. MANUFACTURER OTHER Address for service in India/Attorney address: GAURAV SONI, ADVOCATE E-101, SHAKSHAT STUDIO APPARTMENT, NEAR NANDHISWAR MAHADEV MANDIR, MAKARBA ROAD, VEJALPUR - 380051, AHMEDABAD - GUJARAT Used Since :21/12/2015 AHMEDABAD MEDICAL DEVICE NAMELY LARYNGOSCOPE. 1455 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 3226167 02/04/2016 ZHUHAI JUHAI TECHNOLOGY CO. LTD. NO. 6, PINGGONG FIRST ROAD, NANPING TECHNOLOGY PARK, XIANGZHOU, DISTRICT ZHUHAI CITY, CHINA MANUFACTURER AND MERCHANT A company incorporated under the Chinese Act Address for service in India/Agents address: Y. J. TRIVEDI & CO. YAGNAJYOT, OPP. KASHIRAM AGRAWAL HALL, POLYTECHNIC, AHMEDABAD 380 015 Proposed to be Used AHMEDABAD SURGICAL, MEDICAL, DENTAL AND VETERINARY APPARATUS AND INSTRUMENTS, ARTIFICIAL LIMBS, EYES AND TEETH; ORTHOPEDIC ARTICLES; SUTURE MATERIALS 1456 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 3491482 25/02/2017 KALPESH KANTILAL MEHTA trading as ;E-MOULD TECHNIQUES 15/4-L-COLONY, NR. SAHAJANAND COLLEGE, AMBAWADI, AHMEDABAD, GUJARAT-INDIA MANUFACTURER AND MERCHANT Address for service in India/Attorney address: T.C.PATEL & CO., 229, GOLDEN PLAZA, OPP. ARYA SAMAJ MANDIR, OUT SIDE RAIPUR GATE, KANKARIA, AHMEDABAD - 380 022 Used Since :12/11/2003 AHMEDABAD IN RESPECT OF SURGICAL, MEDICAL, DENTAL AND VETERINARY APPARATUS AND INSTRUMENTS, ARTIFICIAL LIMBS, EYES AND TEETH, ORTHOPEDIC ARTICLES, SATURE MATERIALS INCLIDED IN CLASS - 10 1457 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 3597216 22/07/2017 PAN INDIA NETWORK LIMITED 135, CONTINENTAL BUILDING, DR. ANNIE BESANT ROAD, WORLI, MUMBAI-400018, INDIA. An Indian Company Address for service in India/Attorney address: MANISH M BHAGNARI BLOCK NO. A-168/335, NEAR GURU NANAK HIGH SCHOOL, KURLA-CAMP ROAD, ULHASNAGAR-421004, MAHARASHTRA, INDIA. Proposed to be Used To be associated with: 3582728 MUMBAI SURGICAL, MEDICAL, DENTAL AND VETERINARY APPARATUS AND INSTRUMENTS; ARTIFICIAL LIMBS, EYES AND TEETH; ORTHOPAEDIC ARTICLES; SUTURE MATERIALS; THERAPEUTIC AND ASSISTIVE DEVICES ADAPTED FOR THE DISABLED; MASSAGE APPARATUS; APPARATUS, DEVICES AND ARTICLES FOR NURSING INFANTS; SEXUAL ACTIVITY APPARATUS, DEVICES AND ARTICLES. 1458 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 3721579 08/01/2018 Amit Jain, Proprietor, Trading as Universal Biosciences 404/7, Ayushi Apartment, Rajgarh Kothi, Manorama Ganj, Indore-452 001 (M.P) India. Proprietor Address for service in India/Agents address: RAO & RAO. 12-10-651/3, ROAD NO.2, INDIRANAGAR, WARASLGUDA SECUNDERABAD - 500 061 ( A.P.). Used Since :25/02/2012 MUMBAI Condoms, contraceptives, sexual activity apparatus and devices. 1459 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 SHEKHAR 3727366 15/01/2018 CHANDRASHEKHAR CHAWAN 108, FALCON COURT, HARI OM NAGAR MULUND EAST, MUMBAI -400081 MANUFACTURER AND MERCHANT A INDIAN NATIONAL Used Since :15/10/2016 MUMBAI ARTIFICIAL EYES, SURGICAL INSTRUMENT FOR USE IN OPHTHALMIC SURGERY 1460 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 3731696 18/01/2018 BIORAD MEDISYS PVT. LTD. Survey No 48-3 & 48-7, Pashan Sus Road, Sus Village, Taluka- Mulshi, Pune-411021, Maharashtra Manufacturing of Medical Implants and Disposables Registered Used Since :01/11/2017 MUMBAI Spine Impant, Spine Cervical Implant, Spine Lumbar Implant 1461 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 3740385 30/01/2018 GENINOVA AGENCIES No - 48/79, Ground Floor, Pallithrikkovil Building, ST. Ritas Road, Ponnurunni Vyttila PO, Kochi - 682019 Registered Partnership Firm Address for service in India/Agents address: C. PRAKASH 1A, Post Office Road, 1st floor, Krishnaswamy Nagar, Ramanathapuram, Coimbatore-641045. Proposed to be Used CHENNAI Surgical, medical, dental and veterinary apparatus and instruments; Artificial limbs, eyes and teeth; Orthopedic articles; Suture materials; Therapeutic and assistive devices adapted for the disabled; Massage apparatus; Apparatus, devices and articles for nursing infants; Sexual activity apparatus, devices and articles Subject to use the mark as shown in the form of representation. 1462 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 LARAH OPAL GLASS BY BOROSIL 3786466 23/03/2018 BOROSIL GLASS WORKS LTD. Crescenzo, 1101, 11th Floor, G Block, Plot No. C 38/39, Bandra Kurla Complex, Bandra ( East ),Mumbai – 400051. Body Incorporate Address for service in India/Agents address: KAYSER AND COMPANY. RAJA BAHADUR MANSION, 20 AMBALAL DOSHI MARG, FORT, MUMBAI- 400 023. Proposed to be Used MUMBAI surgical, medical, dental, nursing and veterinary apparatus, appliances and instruments; artificial limbs, eyes, and teeth; orthopedic articles; suture materials; cupping glasses; cooling patches for medical purposes; diagnostic apparatus for medical purposes; feeding bottles; heating cushions, electric, for medical purposes / heating pads, electric, for medical purposes; ice bags for medical purposes; knives for surgical purposes; lenses [intraocular prostheses] for surgical implantation / intraocular prostheses [lenses] for surgical implantation; quartz lamps for medical purposes; spoons for administering medicine; ASSOCIATION NO.676506. 1463 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 4118773 15/03/2019 UDAY MAHADEO GHARE (KARTA), SHUBHA UDAY GHARE, SHIVAM UDAY GHARE & SAI UDAY GHARE 1-A, SANDESH BHUVAN, BAJAJ CROSS ROAD, KANDIVALI WEST, MUMBAI - 400067, MAHARASHTRA, INDIA HINDU UNDIVIDED FAMILY Address for service in India/Agents address: MAKHIJA & ASSOCIATES. OFFICE NO.1/1, 1ST FLOOR, A WING, SAI TIRTH TOWER, STATION ROAD,SIDDHARTH NAGAR,THANE (E)-400603 Proposed to be Used MUMBAI SURGICAL, MEDICAL, DENTAL AND VETERINARY APPARATUS AND INSTRUMENTS; ARTIFICIAL LIMBS, EYES AND TEETH; ORTHOPEDIC ARTICLES; SUTURE MATERIALS; THERAPEUTIC AND ASSISTIVE DEVICES ADAPTED FOR THE DISABLED; MASSAGE APPARATUS; APPARATUS, DEVICES AND ARTICLES FOR NURSING INFANTS; SEXUAL ACTIVITY APPARATUS, DEVICES AND ARTICLES. 1464 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 4123451 20/03/2019 HIGHNESS MICROELECTRONICS PRIVATE LIMITED 102, Elecon Chambers, Sakinaka MTNL Road, Andheri-E, Mumbai 400 072, Maharashtra. An Indian company. Address for service in India/Agents address: S. MAJUMDAR & CO. 5, HARISH MUKHERJEE ROAD, KOLKATA - 700 025, INDIA. Used Since :01/10/2008 MUMBAI Medical & healthcare monitors. 1465 Trade Marks Journal No: 1901 , 13/05/2019 Class 10 ALISHBACHAOBA 4124197 20/03/2019 MOHD. SHAKEEL House No-2796 , Gali Garhaiya Kucha Chelan Darya Ganj , Central Delhi , Delhi-110002 SINGLE FIRM Address for service in India/Attorney address: SUNIL KUMAR ADVOCATE F-122, GF, UTSAV APARTMENT, SECTOR-18, ROHINI, DELHI-110089 Proposed to be Used To be associated with: 3107006 DELHI BODY MASSAGER MACHINE, MASSAGING APPARATUS, HAND MASSAGER MACHINE, PHYSICAL THERAPY EQUIPMENT, VIBRATORS MASSAGERS, FACIAL MASSAGERS, FOOT MASSAGERS, BODY MASSAGERS, ELECTRICALLY
Load more

Recommended publications
  • 4 Ways to Reduce Secondary Packaging Costs by Replacing Pre-Printed Corrugated Boxes with Direct Carton Marking WHITE PAPER
    4 Ways to Reduce Secondary Packaging Costs by Replacing Pre-Printed Corrugated Boxes with Direct Carton Marking WHITE PAPER 4 Ways to Reduce Secondary Packaging Costs by Replacing Pre-Printed Corrugated Boxes with Direct Carton Marking Introduction Virtually ubiquitous as the standard for secondary Instead, most shippers attempt to analyze their outbound packaging of products around the world, boxes made of order fulfillment data and stock keeping unit (SKU) profiles corrugated fiberboard are anything but standard when it to determine the carton dimension(s) their shipments comes to the variety of styles and sizes. Although regular most commonly require. Depending on this information, slotted containers (RSCs) are the most commonly used style operations may elect to maintain a pre-printed box of box, they are offered in more than 1,300 different sizes. inventory anywhere from five to 50 (or more) different carton sizes. That broad range of available sizes makes it possible for shippers to most closely match the internal box dimensions Offered as a more cost-effective alternative to stocking to the size of its contents. For financial reasons particularly pre-printed corrugated boxes, direct carton marking with the recent movement of parcel shippers from weight- employs high-resolution inkjet printers to imprint text, based to dimension and weight (DIM Weight) charges it graphics and barcodes directly onto each box as needed. makes the most sense to package items for shipment in This white paper explains how direct carton marking a box sized to minimize empty space inside the carton. technology works and outlines the four ways a shipper can Otherwise, to protect the product(s) inside from shock, reduce costs by replacing pre-printed boxes with direct vibration, compression or other factors, the empty space carton marking.
    [Show full text]
  • Corrugated Board Structure: a Review M.C
    ISSN: 2395-3594 IJAET International Journal of Application of Engineering and Technology Vol-2 No.-3 Corrugated Board Structure: A Review M.C. Kaushal1, V.K.Sirohiya2 and R.K.Rathore3 1 2 Assistant Prof. Mechanical Engineering Department, Gwalior Institute of Information Technology,Gwalior, Assistant Prof. Mechanical Engineering 3 Departments, Gwalior Engineering College, Gwalior, M. Tech students Maharanapratap College of Technology, Gwalior, [email protected] [email protected] [email protected] ABSTRACT Corrugated board is widely used in the packing industry. The main advantages are lightness, recyclability and low cost. This makes the material the best choice to produce containers devoted to the shipping of goods. Furthermore examples of structure design based on corrugated boards can be found in different fields. Structural analysis of paperboard components is a crucial topic in the design of containers. It is required to investigate their strength properties because they have to protect the goods contained from lateral crushing and compression loads due to stacking. However in this paper complete and detailed information are presented. Keywords: - corrugated boards, recyclability, compression loads. Smaller flutes offer printability advantages as well as I. INTRODUCTION structural advantages for retail packaging. Corrugated board is essentially a paper sandwich consisting of corrugated medium layered between inside II. HISTORY and outside linerboard. On the production side, corrugated In 1856 the first known corrugated material was patented is a sub-category of the paperboard industry, which is a for sweatband lining in top hats. During the following four sub-category of the paper industry, which is a sub-category decades other forms of corrugated material were used as of the forest products industry.
    [Show full text]
  • Corrugated 101! ! !Corrugated Vs
    Corrugated 101! ! !Corrugated vs. Cardboard! • The term "cardboard box" is commonly misused when referring to a corrugated box. The correct technical term is "corrugated fiberboard carton.”! • Cardboard boxes are really chipboard boxes, and used primarily for packaging lightweight products, such as cereal or board games.! • Corrugated fiberboard boxes are widely utilized in retail packaging, shipping cartons, product displays and many other applications ! requiring lightweight, but sturdy materials.! !Corrugated Composition! Corrugated fiberboard is comprised of linerboard and heavy paper medium. Linerboard is the flat, outer surface that adheres to the medium. The medium is the wavy, fluted paper between the liners. Both are made of a special kind of heavy paper called !containerboard. Board strength will vary depending on the various linerboard and medium combinations.! • Single Face: Medium glued to 1 linerboard; flutes exposed! • Single Wall: Medium between 2 liners! • Double Wall: Varying mediums layered between 3 liners! !• Triple Wall: Varying mediums layered between 4 liners! !Flute Facts! !Corrugated board can be created with several different flute profiles. The five most common flute profiles are:! • A-Flute: Original corrugated flute design. Contains about 33 flutes per foot.! • B-Flute: Developed primarily for packaging canned goods. Contains about 47 flutes per foot and measures 1/8" thick! • C-Flute: Commonly used for shipping cartons. Contains about 39 flutes per foot and measures 5/32" thick! • E-Flute: Contains about 90 flutes per foot and measures 1/16" thick! • F-Flute: Developed for small retail packaging. Contains about 125 flutes per foot and measures 1/32" thick! • Generally, larger flute profiles deliver greater vertical compression strength and cushioning.
    [Show full text]
  • Effect of Horizontal Offset on Vertical Compression Strength of Stacked Corrugated Fiberboard Boxes
    R E S E A R C H Effect of Horizontal Offset on Vertical Compression Strength of Stacked Corrugated Fiberboard Boxes JAY SINGH1,*, S. PAUL SINGH2 and KOUSHIK SAHA3 1Professor, Packaging Program, Cal Poly State University, San Luis Obispo, CA 2Professor, School of Packaging, Michigan State University, East Lansing, MI 3Assistant Professor, Packaging Program, Cal Poly State University, San Luis Obispo, CA ABSTRACT: The purpose of this study was to evaluate the effect of horizontal offset on the compression strength of stacked box configu­ rations. Four different boxes of varying sizes and similar board com­ binations, made from similar flute but different manufacturers were studied. The single box compression strength for each type of box was determined to represent as the control for this study. The com­ pression strength of control boxes were compared to overall strength of a three-high stack and in three different offset configurations. In ad­ dition, a set of perfectly aligned boxes stacked three high were com­ pression tested for comparison with control and mis-aligned stacked boxes. The stack configurations were offset either in the length, width or diagonally (both length and width) with an offset distance of 12.7 mm, 25.4 mm or 38.1 mm (0.5, 1, and 1.5 inches). 1.0 INTRODUCTION HE compression strength of a corrugated fiberboard shipping con­ Ttainer is affected by various factors including but not limited to dimensions, flute size, basis weight of linerboards/medium, exposure to temperature and humidity, creep, stacking configuration, as well as shipping and handling. Some of these climatic and physical factors can contribute towards the natural variation and degradation in the fiber­ board and box compression strength or the box’s ability to stack and support other filled and loaded boxes during storage and shipping.
    [Show full text]
  • 1 Fibre Box Handbook Glossary Adhesive
    Fibre Box Handbook Glossary A Adhesive: Substance capable of adhering one surface to another. For fiberboard boxes, the substance is used to hold plies of solid fiberboard together, to hold linerboard to the tips of flutes of corrugated medium, or to hold overlapping flaps together to form the joint or to close a box. Anilox System: Inking system used in flexographic presses. B Bale: A shaped unit, usually containing compressible articles or materials, enclosed in a fiberboard container not conforming to the carriers’ rules for a box, or enclosed in other wrapping, and bound by strapping, rope or wire under tension. Banded Unit: A package or palletized load that has a band or bands (usually plastic) applied to it. Bar Code: An identification symbol. Alpha or alpha-numeric information is encoded in a sequence of high-contrast, rectangular bars and blank spaces. The relative widths of these bars and spaces and their sequence differentiate the individual characters that make up the encoded information. Bar codes are “read” by electronic scanners. Basis Weight (of Containerboard): Weight of linerboard or corrugating medium expressed in terms of pounds per 1,000 square feet (msf). Bending: In the expression "proper bending qualities," the ability of containerboard or combined board to be folded along score lines without rupture of the surface fibers to the point of seriously weakening the structure. Blank or Box Blank: A flat sheet of corrugated or solid fiberboard that has been cut, slotted and scored so that, when folded along the score lines and joined, it will take the form of a box.
    [Show full text]
  • Terminology on Paper & Pulp: Types of Paper and Containerboard, Containerboard Grades and Tests
    Terminology On Paper & Pulp: Types of Paper and Containerboard, Containerboard Grades and Tests Prepared for the Meeting of the Paper & Pulp Industry Project By Aselia Urmanbetova Date: September 10, 2001 1 Paper Products Chart: Containerboard Tree/Waste Paper Pulp Paper Paperboard Brown Coated Uncoated (container- board) Brown (65% White (95%- Copying Paper Newsprint hardwood and 100% 35% softwood) softwood) White Tissue (paperboard package) SBS (Solid Boxboard Bleach Sulfate) Coated Uncoated 2 Examples of Containerboard Grades/Mead Corporation: (Refer to the Glossary for the Explanation of the Terms) Standard Grades Grade Basis Weight Moisture Ring Crush Concora 26 SC 26.0 9.0 N/A 63 30 SC 30.0 9.0 50 68 33 SC 33.0 9.0 60 72 36 SC 36.0 9.0 71 79 40 SC 40.0 9.0 82 79 45 SC 45.0 9.0 102 95 Light Weights Grade Basis Weight Moisture Porosity Concora STFI 18 SC 18.0 7.5 30 33 9.5 20 SC 20.0 7.5 30 35 10.5 23 SC 23.0 9.0 30 59 12.0 Polar Chem Grade Basis Weight Moisture Ring Crush Concora Wet Mullen 30 PC 30.0 9.0 50 68 4.0 33 PC 33.0 9.0 60 72 4.0 36 PC 36.0 9.0 71 79 4.0 40 PC 40.0 9.0 82 79 4.0 45 PC 45.0 9.0 102 95 4.0 3 Paper Products and Containerboard Glossary B Flute A flute that is approximately 0.097 inches high.
    [Show full text]
  • Postharvest Storage, Packaging and Handling of Specialty Crops: a Guide for Florida Small Farm Producers 1 Jonathan Adam Watson, Danielle Treadwell, Steven A
    HS1270 Postharvest Storage, Packaging and Handling of Specialty Crops: A Guide for Florida Small Farm Producers 1 Jonathan Adam Watson, Danielle Treadwell, Steven A. Sargent, Jeffrey K. Brecht, and William Pelletier2 Introduction ensure that product quality is maintained throughout the distribution environment, guidelines regarding short-term Over 47,000 farms in the state of Florida produce nearly postharvest storage, packaging, and handling are necessary. 300 different commodities, most of which are considered specialty crops, defined as fruits and vegetables, tree nuts, For producers, the fruits of their labor culminate with a dried fruits, horticultural, and nursery crops. In Florida, specific process each season depending on the crop, culti- agriculture is a $2 billion per year industry. The state var, and various environmental conditions. This process, ranks first in the United States in total value of production known as the harvest, is the gathering of mature crops or for oranges ($1.5 billion), grapefruit ($187 million), and yield from one growing season. The harvest marks the end watermelons ($138 million). Florida also ranks first in the of the growing season and represents significant social total value of production for many vegetables such as snap importance to communities as they celebrate its arrival beans ($167 million), fresh market cucumbers ($67 mil- each year. However, harvest time also creates challenges lion), sweetcorn ($180 million), and fresh market tomatoes for producers trying to deliver fresh, high-quality produce ($268) (Florida Department of Agriculture and Consumer to market. If not dealt with correctly, these challenges Services 2013). The value of these crops is an important become barriers within the distribution chain, resulting component of the well-being of the state’s producers and in loss of revenue.
    [Show full text]
  • Postharvest Storage, Packaging and Handling of Specialty Crops: a Guide for Florida Small Farm Producers 1 Jonathan Adam Watson, Danielle Treadwell, Steven A
    Archival copy: for current recommendations see http://edis.ifas.ufl.edu or your local extension office. HS1270 Postharvest Storage, Packaging and Handling of Specialty Crops: A Guide for Florida Small Farm Producers 1 Jonathan Adam Watson, Danielle Treadwell, Steven A. Sargent, Jeffrey K. Brecht, and William Pelletier2 Introduction ensure that product quality is maintained throughout the distribution environment, guidelines regarding short-term Over 47,000 farms in the state of Florida produce nearly postharvest storage, packaging, and handling are necessary. 300 different commodities, most of which are considered specialty crops, defined as fruits and vegetables, tree nuts, For producers, the fruits of their labor culminate with a dried fruits, horticultural, and nursery crops. In Florida, specific process each season depending on the crop, culti- agriculture is a $2 billion per year industry. The state var, and various environmental conditions. This process, ranks first in the United States in total value of production known as the harvest, is the gathering of mature crops or for oranges ($1.5 billion), grapefruit ($187 million), and yield from one growing season. The harvest marks the end watermelons ($138 million). Florida also ranks first in the of the growing season and represents significant social total value of production for many vegetables such as snap importance to communities as they celebrate its arrival beans ($167 million), fresh market cucumbers ($67 mil- each year. However, harvest time also creates challenges lion), sweetcorn ($180 million), and fresh market tomatoes for producers trying to deliver fresh, high-quality produce ($268) (Florida Department of Agriculture and Consumer to market. If not dealt with correctly, these challenges Services 2013).
    [Show full text]
  • 1455189355674.Pdf
    THE STORYTeller’S THESAURUS FANTASY, HISTORY, AND HORROR JAMES M. WARD AND ANNE K. BROWN Cover by: Peter Bradley LEGAL PAGE: Every effort has been made not to make use of proprietary or copyrighted materi- al. Any mention of actual commercial products in this book does not constitute an endorsement. www.trolllord.com www.chenaultandgraypublishing.com Email:[email protected] Printed in U.S.A © 2013 Chenault & Gray Publishing, LLC. All Rights Reserved. Storyteller’s Thesaurus Trademark of Cheanult & Gray Publishing. All Rights Reserved. Chenault & Gray Publishing, Troll Lord Games logos are Trademark of Chenault & Gray Publishing. All Rights Reserved. TABLE OF CONTENTS THE STORYTeller’S THESAURUS 1 FANTASY, HISTORY, AND HORROR 1 JAMES M. WARD AND ANNE K. BROWN 1 INTRODUCTION 8 WHAT MAKES THIS BOOK DIFFERENT 8 THE STORYTeller’s RESPONSIBILITY: RESEARCH 9 WHAT THIS BOOK DOES NOT CONTAIN 9 A WHISPER OF ENCOURAGEMENT 10 CHAPTER 1: CHARACTER BUILDING 11 GENDER 11 AGE 11 PHYSICAL AttRIBUTES 11 SIZE AND BODY TYPE 11 FACIAL FEATURES 12 HAIR 13 SPECIES 13 PERSONALITY 14 PHOBIAS 15 OCCUPATIONS 17 ADVENTURERS 17 CIVILIANS 18 ORGANIZATIONS 21 CHAPTER 2: CLOTHING 22 STYLES OF DRESS 22 CLOTHING PIECES 22 CLOTHING CONSTRUCTION 24 CHAPTER 3: ARCHITECTURE AND PROPERTY 25 ARCHITECTURAL STYLES AND ELEMENTS 25 BUILDING MATERIALS 26 PROPERTY TYPES 26 SPECIALTY ANATOMY 29 CHAPTER 4: FURNISHINGS 30 CHAPTER 5: EQUIPMENT AND TOOLS 31 ADVENTurer’S GEAR 31 GENERAL EQUIPMENT AND TOOLS 31 2 THE STORYTeller’s Thesaurus KITCHEN EQUIPMENT 35 LINENS 36 MUSICAL INSTRUMENTS
    [Show full text]
  • Effect of Paperboard Stress-Strain Characteristics on Strength Of
    United States Department of Agriculture Effect of Paperboard Forest Service Stress-Strain Characteristics Forest Products Laboratory on Strength of Singlewall Research Paper FPL 401 Corrugated Fiberboard: A Theoretical Approach Abstract The stress-strain relationship for paperboard loaded in edgewise compression relates to the strength of singlewall corrugated containers. This relationship can be approximated from the paperboard characteristics of stress measured at the maximum load and the initial modulus of elasticity. Based on typical characteristics for both linerboard and corrugating medium material a design matrix is constructed for a factorial analysis. Using a computer, various stress-strain relationships are paired together like they might be on the cor- rugator, and the theoretical effects of the stress-strain characteristics are investigated. Computer drawn design curves show how these linerboard and medium characteristics affect combined board edgewise com- pressive strength and box top-to-bottom compressive strength. The interaction between the stress-strain characteristics and paperboard thickness is used to suggest new criteria for evaluating paperboard. United States Department of Agriculture Effect of Paperboard Forest Service Stress-Strain Characteristics Forest Products Laboratory1 on Strength of Singlewall Research Paper Corrugated Fiberboard: FPL 401 July 1981 A Theoretical Approach By THOMAS J. URBANIK, Engineer Introduction Koning (4) expanded on McKee, et al.'s formula to ex- amine the effects of linerboard characteristics on con- There are increasing demands on corrugated con- tainer strength. Though good correlation was obtained tainers to perform successfully in the service en- between theoretical and experimental values (5), ex- vironments. As the container’s environment is better tending the solution process which relied on an ap- defined, it becomes more rational to evaluate the con- proach by Moody (8) is inefficient for investigating the tainer based on end use performance.
    [Show full text]
  • Models and Software for Corrugated Board and Box Design
    INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED11 15 - 18 AUGUST 2011, TECHNICAL UNIVERSITY OF DENMARK MODELS AND SOFTWARE FOR CORRUGATED BOARD AND BOX DESIGN Vahid Sohrabpour1 and Daniel Hellström2 (1) Lund University, Sweden (2) Lund University, Sweden ABSTRACT To design and develop boxes which protect, and at the same time utilize fiber material efficiently, models and software for predicting corrugated board and box properties are needed. The purpose of this research is to provide propositions toward improving the use and development of models and software for corrugated board and box design. By using an abductive approach, 18 models and four software for predicting corrugated board and box properties were identified, compared, and categorized depending on the needs of different supply chain actors. Eight of the models use paper properties for predicting board properties while ten models predict corrugated box properties. In order to decrease the gap between theory and practice new insights, in the form of propositions toward improving the use and development of models and software for corrugated box design, are suggested. A holistic perspective for modeling corrugated board and box is proposed and enables practitioners and researchers to identify causes to variation in predictions by considering control and noise factors. Keywords: Prediction model, simulation, packaging design, corrugated, board, box 1 INTRODUCTION Corrugated boxes have been used for protecting products for over a century. To design and develop boxes which protect, and at the same time utilize fiber material efficiently, models and software for predicting corrugated board and box properties are needed. Without these predictive models and software the corrugated industry needs to produce a set of samples and conduct physical tests which involve high costs and require more time.
    [Show full text]
  • Corrugated Fiber Board As a Packaging Material: Experimental and Numerical Analysis of the Mechanical Behavior
    15th International LS-DYNA® Users Conference Simulation Corrugated Fiber Board as a Packaging Material: Experimental and Numerical Analysis of the Mechanical Behavior Chandra Sekhar Kattamuri, Madhukar Chatiri Affiliations CADFEM Engineering Services India Pvt.Ltd. Abstract Corrugated Fiber Board (CFB) is a sandwich structure in which several paperboard materials, linerboard is glued to a sine wave shaped core, flute/corrugated medium. CFB packaging is a versatile, economic, light, robust, recyclable, practical and dynamic form of packaging. Boxes made from CFB are commonly used for the packaging of consumer goods, where better resistances to compressive forces, higher bending stiffness, better printability and greater moisture resistance are the most important requirements. The boxes are routinely custom designed to meet specific customer requirements. CFB along with Expanded Polystyrene foam (EPS) and wooden bars form the major part of packaging for the home appliances at BSH Hausgeräte GmbH (B/S/H/). Good packaging is essential for storage and safe transportation of home appliances. To ensure better quality packaging design, transport tests at B/S/H/ are carried out which consist of clamp, compression, impact and shunt. These tests ensure fault-free or limited damage to packaging, as long as shipment is made without damage to the home appliance. Virtual product development based on finite element method is applied to variety of home appliances at B/S/H/. Especially, numerical simulation applied to transport tests at product area cookers resulted in providing good quality and cost-effective packaging for the cookers. Cooker packaging mainly consists of EPS and wooden bars and good numerical modeling knowledge is available for these materials.
    [Show full text]