Rocky Mountain Weavers' Guild Reference Library Collection
Total Page：16
File Type：pdf, Size：1020Kb
Load more
Recommended publications
-
Downloaded at : 25/09/2021 05:53 Am
Government of India Ministry of Defence Ordnance Factory Board 10A, S.K. Bose Road Kolkata - 700001 CENTRALISED VENDOR REGISTRATION CERTIFICATE This is to certify that M/s The Ruby Mills Ltd.,, Ruby House, J.K. Sawant Marg, Dadar (West), Mumbai Maharashtra is registered at Ordnance Factory Board for following Items. Sl. Factory / Unit Item Nomenclature Initial Date of No. Registration 1 Ordnance Equipment Factory CAMBRIC COTTON WHITE 91 CMS. 29-11-2012 2 CANVAS COTTON 410 GMS. KHAKI 91 CMS. 29-11-2012 3 CANVAS COTTON 410 GMS. O.G. WP 91 CMS. 29-11-2012 4 CANVAS COTTON 545 GMS. SCOURED 91 CMS. 29-11-2012 5 CANVAS COTTON 680 GM. O.G 91CM 29-11-2012 6 CANVAS COTTON 815 GMS O.G W.P. 91 CMS 29-11-2012 7 FABRIC COTTON DYED WATER REPELLENT 275 29-11-2012 GSM OG 91 CMS. WIDE 8 CANVAS NYLON 220 GRAM O.G 91 CMS 29-11-2012 9 CLOTH CALICO COTTON KHAKI 91CM 29-11-2012 10 CLOTH CALICO COTTON WHITE 91 CMS 29-11-2012 11 CLOTH CALICO COTTON WHITE BLEACHED 91 29-11-2012 CM. 12 CLOTH CANVAS COTTON 545 GMS. O.G W.P. 91 29-11-2012 CMS. WIDE 13 CLOTH CANVAS COTTON 680 GR.O.G. WP 91 29-11-2012 CMS. 14 CLOTH COTTON 375 GRM. SCOURED W.R. FOR 29-11-2012 CAPES 91 CMS. WIDE 15 CLOTH COTTON CLOSELY WOVEN 170 GM 29-11-2012 WHITE WR 91 CM Page 1/7 16 CLOTH COTTON CLOSELY WOVEN 170 GMS 29-11-2012 SAND COLOUR W.R. -
Environment Friendly Antibacterial and Uv Protective Finish on Cotton Using Syzygium Cumini (L.) Leaves Extract
International Journal of Textile and Fashion Technology (IJTFT) ISSN(P): 2250-2378; ISSN(E): 2319-4510 Vol. 7, Issue 1, Feb 2017, 53-62 © TJPRC Pvt. Ltd. ENVIRONMENT FRIENDLY ANTIBACTERIAL AND UV PROTECTIVE FINISH ON COTTON USING SYZYGIUM CUMINI (L.) LEAVES EXTRACT VANDANA GUPTA 1, DEEPIKA CHAUDHARY 2, SALONI GUPTA 3 & NIRMAL YADAV 4 1Department of Fashion & Design, Chandigarh University, Gharuan, Mohali, Punjab, India 2Department of Microbiology, CCS Haryana Agricultural University, Hisar, Haryana, India 3Department of Environmental Science and Engg, Guru Jambheshwar University of Science and Technology, Hisar, (Haryana), India 4Department of Textile and Apparel Design, CCS Haryana Agricultural University, Hisar, Haryana, India ABSTRACT The present study was conducted to develop antibacterial and UV protective cotton fabric by using plant extract. Syzygium cumini (L.) leaves extract was extracted through soxhlet method and was applied on cotton fabric by using pad dry cure process. Phytochemical analysis of S. cumini (L.) leaves extract indicated presence of tannin, flavonoids, saponin and phenols and exhibited antibacterial activity against gram-positive bacteria with zone of inhibition of (6.0 – 11.16 mm for B. subtilis and 4.83 -10.0 mm for S. aureus) and sun protective property with 23.91 – 25.01 SPF value at different Original Article Article Original concentrations. Cotton fabric finished with S. cumini (L.) leaves extract exhibited improvement in bacterial resistance with per cent reduction in the bacterial count of the finished fabric by 95.67% for S. aureus and 94.70% for B. subtilis as well as exhibited high UPF value (48.1), providing excellent protection when compared to untreated control fabric. -
Library Author List 12:2020
SDCWG LIBRARY INVENTORY December 2020 SORTED BY AUTHOR Shelf Author Title Subject Location Abel, Isabel Multiple Harness Patterns Weaving Instruction Adelson, Laurie Weaving Tradition of Highland Bolivia Ethnic Textiles Adrosko, Rita Natural Dyes and Home Dyeing Dyeing Adrosko, Rita Natural Dyes in the United States Dyeing Ahnlund, Gunnila Vava Bilder (Swedish Tapestry) Ethnic Textiles Albers, Anni On Designing Design Albers, Anni On Weaving General Weaving Albers, Josef Interaction of Color Design Alderman, Sharon D. Handwoven, Tailormade Clothing Alderman, Sharon D. Handweaver's Notebook General Weaving Alderman, Sharon D. Mastering Weave Structures Weaving Patterns Alexander, Marthann Weaving Handcraft General Weaving Allard, Mary Rug Making Techniques and Design Rug Weaving Allen, Helen Louise American & European Hand Weaving General Weaving American Craft Museum Diane Itter: A retrospective Catalog American Tapestry American Tapestry Biennial I Tapestry Alliance American Tapestry American Tapestry Today Tapestry Alliance American Tapestry Panorama of Tapestry, Catalog Tapestry Alliance American-Scandinavian The Scandinavian Touch Ethnic Textiles Foundation Amos, Alden 101 Questions for Spinners Spinning 1 SDCWG LIBRARY INVENTORY December 2020 SORTED BY AUTHOR Shelf Author Title Subject Location Amsden, Charles A. Navaho Weaving Navajo Weaving Anderson, Clarita Weave Structures Used In North Am. Coverlets Weave Structures Anderson, Marilyn Guatemalan Textiles Today Ethnic Textiles Anderson, Sarah The Spinner’s Book of Yarn Designs -
University of Huddersfield Repository
University of Huddersfield Repository Redmore, Nicola Open to change: Embracing nature and the fragility of design. An investigation into outdoor seating materials through the practice of leno weaving. Original Citation Redmore, Nicola (2014) Open to change: Embracing nature and the fragility of design. An investigation into outdoor seating materials through the practice of leno weaving. Masters thesis, University of Huddersfield. This version is available at http://eprints.hud.ac.uk/id/eprint/23669/ The University Repository is a digital collection of the research output of the University, available on Open Access. Copyright and Moral Rights for the items on this site are retained by the individual author and/or other copyright owners. Users may access full items free of charge; copies of full text items generally can be reproduced, displayed or performed and given to third parties in any format or medium for personal research or study, educational or not-for-profit purposes without prior permission or charge, provided: • The authors, title and full bibliographic details is credited in any copy; • A hyperlink and/or URL is included for the original metadata page; and • The content is not changed in any way. For more information, including our policy and submission procedure, please contact the Repository Team at: [email protected]. http://eprints.hud.ac.uk/ Open to change: Embracing nature and the fragility of design. An investigation into outdoor seating materials through the practice of leno weaving. Nicola Redmore A thesis submitted to the University of Huddersfield in partial fulfilment of the requirements for the degree of Masters by Research June 2014 Abstract The research documented in this thesis investigates the potential of leno woven fabrics to be developed for outdoor seating use, and to understand the influence that hand- weaving of these fabrics has on the design process for the commercial textile designer. -
Washington, Saturday, /Wne 2, 1945
- » *1 IITTM» I FEDERAL %REGISTER '9 3 4 ^ VOLUME 10 NUMBER 110 * Un it e d % Washington, Saturday, /wne 2, 1945 Regulations [WFO 75-2a] CONTENTS Part 1410—Livestock and Meats REGULATIONS AND NOTICES TITLE 7—AGRICULTURE SCHEDULE OF GOVERNMENT BEEF PURCHASE Alien Property Custodian : AND SET ASIDE PERCENTAGES . Vesting orders: Page Chapter XI—War Food Administration Pursuant to the provisions of War Food Bamberg, Marie___________ 6524 (Distribution Orders) Order No. 75-2, as amended (supra), and Bollerslev, Carrie E___1____ 6524 [WFO 109, as Amended, Termination] to effectuate the purposes thereof, it is Hahn, Marie______________ 6527 hereby ordered as follows: Koelsch, Louis_____________ 6525 Kuehl, Gustav_____________ 6525 Part 1490—Miscellaneous F ood § 1410.27 • Establishment of base pe Products Ludde, Robert, and Robert riod; establishment of beef purchase and Bernherd Ludde________ 6526 SOLUBLE COFFEE AND SOLUBLE COFFEE set aside, percentages—(a) Definitions. Lukitsch, Joseph___________ 6526 PRODUCTS The terms used herein shall have the Merkel, Else_______________ 6528 meaning set forth for such terms in War Miklosovitz .Elsie__________ 6528 War Food Order No. 109, as amended Food Order No. 75, as amended (10 F.R. Muller, Johann, et al______ 6526' (9 F.R. 9134; 10 F.R. 103), is terminated 4649), and War Food Order No. 75-2, as Reindl, John___________ _ 6527 as of 12:01 a.m., e.w.t., June 1, 1945, amended. Zoberbier, Carl-___________ 6528 but all soluble coffee and all soluble coffee (b) Base period; current rate of Customs Bureau: products set aside, at the effective time slaughter. The month of June 1944 is Airports of entry, redesignation. -
Novel Weaving Technology for the Manufacture of 2D Net Shape Fabrics for Cost Effective Textile Reinforced Composites
AUTEX Research Journal, Vol. 18, No 3, September 2018, DOI: 10.1515/aut-2018-0005 © AUTEX NOVEL WEAVING TECHNOLOGY FOR THE MANUFACTURE OF 2D NET SHAPE FABRICS FOR COST EFFECTIVE TEXTILE REINFORCED COMPOSITES Duy Minh Phuong Vo, Gerald Hoffmann, Chokri Cherif Institute of Textile Machinery and High Performance Material Technology (ITM), Technische Universität Dresden, 01062 Dresden, Germany, Tel: +49 351 463 34693 Corresponding author e-mail: [email protected] Abstract: Despite significant weight and performance advantages over metal parts, today’s demand for fiber-reinforced polymer composites (FRPC) has been limited mainly by their huge manufacturing cost. The combination of dry textile preforms and low-cost consolidation processes such as resin transfer molding (RTM) has been appointed as a promising approach to low-cost FRPC manufacture. This paper presents an advanced weaving technique developed with the aim to establish a more cost-effective system for the manufacture of dry textile preforms for FRPC. 2D woven fabrics with integrated net shape selvedge can be obtained using the open reed weave (ORW) technology, enabling the manufacture of 2D cut patterns with firm edge, so that oversize cutting and hand trimming after molding are no longer required. The introduction of 2D woven fabrics with net shape selvedge helps to reduce material waste, cycle time and preform manufacturing cost significantly. Furthermore, higher grade of automation in preform fabrication can be achieved. Keywords: 2D net shape weaving with firm edge; ORW technology; woven fabrics for cost effective composites 1. Introduction fibers are delivered in rolls with constant width. Depending on the composite end product, those fabrics are cut into The use of fiber-reinforced polymer composites (FRPC) patterns with particular shape that will be stacked and joined in structural components has been attractive to many into a matched preforming tool to meet the mechanical and industry sectors for decades because of their high strength- structural requirements. -
Basic of Textiles
BASIC OF TEXTILES BFA(F) 202 CC 5 Directorate of Distance Education SWAMI VIVEKANAND SUBHARTI UNIVERSITY MEERUT 250005 UTTAR PRADESH SIM MOUDLE DEVELOPED BY: Reviewed by the study Material Assessment Committed Comprising: 1. Dr. N.K.Ahuja, Vice Chancellor Copyright © Publishers Grid No part of this publication which is material protected by this copyright notice may be reproduce or transmitted or utilized or store in any form or by any means now know or here in after invented, electronic, digital or mechanical. Including, photocopying, scanning, recording or by any informa- tion storage or retrieval system, without prior permission from the publisher. Information contained in this book has been published by Publishers Grid and Publishers. and has been obtained by its author from sources believed to be reliable and are correct to the best of their knowledge. However, the publisher and author shall in no event be liable for any errors, omission or damages arising out of this information and specially disclaim and implied warranties or merchantability or fitness for any particular use. Published by: Publishers Grid 4857/24, Ansari Road, Darya ganj, New Delhi-110002. Tel: 9899459633, 7982859204 E-mail: [email protected], [email protected] Printed by: A3 Digital Press Edition : 2021 CONTENTS 1. Fiber Study 5-64 2. Fiber and its Classification 65-175 3. Yarn and its Types 176-213 4. Fabric Manufacturing Techniques 214-260 5. Knitted 261-302 UNIT Fiber Study 1 NOTES FIBER STUDY STRUCTURE 1.1 Learning Objective 1.2 Introduction 1.3 Monomer, Polymer, Degree of polymerization 1.4 Student Activity 1.5 Properties of Fiber: Primary & Secondary 1.6 Summary 1.7 Glossary 1.8 Review Questions 1.1 LEARNING OBJECTIVE After studying this unit you should be able to: ● Describe the Natural Fiber. -
Busana Pesta Malam Muslimah Dengan Sumber Ide Taj Mahal Dalam Pergelaran Busana Dimantion
BUSANA PESTA MALAM MUSLIMAH DENGAN SUMBER IDE TAJ MAHAL DALAM PERGELARAN BUSANA DIMANTION Proyek Akhir Diajukan Kepada Fakultas Teknik Universitas Negeri Yogyakarta Untuk Memenuhi Sebagian Persyaratan Guna Memperoleh Gelar Ahli Madya Oleh : Gresi Graventi NIM.14514134021 PROGRAM STUDI TEKNIK BUSANA JURUSAN PENDIDIKAN TEKNIK BOGA DAN BUSANA FAKULTAS TEKNIK UNIVERSITAS NEGERI YOGYAKARTA 2017 i HALAMAN PERSEMBAHAN Dengan ridho Allah SWT yang telah telah memberikan rahmat dan hidayahnya sehingga penulisan Proyek Akhir ini dapat selesaikan sesuai dengan rencana .Oleh karena itu karya proyek Akhir ini saya persembahkan untuk : 1. Kedua orang tua dan keluargaku tercinta yang memberi kasih sayang,semangat,doa dan dukungan motivasi serta materi yang diberikan untukku. 2. Sahabat-sahabatku yang telah berjuang bersama-sama baik suka maupun duka. 3. Almamaterku tercinta Universitas Negeri Yogyakarta yang telah memberi kesempatan untuk menimbah ilmu . v MOTTO Katakanlah ( Muhammad),“ Sesungguhnya salatku, ibadahku, hidupku, dan matiku hanyalah untuk Allah Tuhan seluruh alam.” (Q.S Al-An‟aam:162) “Bukanlah orang-orang yang paling baik dari pada kamu siapa yang meninggalkan dunianya karena akhirat, dan tidak pula meninggalkan akhiratnya karena dunianya, sehingga ia dapat kedua-duanya semua. Karena di dunia itu penyampaikan akhirat. Dan jangankah kamu jadi memberatkan atas sesama manusia“. (H.R Muslim) vi BUSANA PESTA MALAM MUSLIMAH DENGAN SUMBER IDE TAJ MAHAL DALAM PERGELARAN BUSANA DIMANTION Oleh: GRESI GRAVENTI 14514134021 ABSTRAK Proyek Akhir ini bertujuan untuk: 1) mencipta disain busana pesta malam muslimah dengan sumber ide Taj Mahal, 2) membuat busana pesta malam muslimah dengan sumber ide Taj Mahal, 3) menyelenggarakan pergelaran busana dengan tema “Dimantion” dan menampilkan busana pesta malam muslimah dengan sumber ide Taj Mahal. -
Carlhian Records, 1867-1988
http://oac.cdlib.org/findaid/ark:/13030/c8z89dsn No online items Finding aid for the Carlhian records, 1867-1988 Teresa Morales and Karen Meyer-Roux Finding aid for the Carlhian 930092 1 records, 1867-1988 Descriptive Summary Title: Carlhian records Date (inclusive): 1867-1988 Number: 930092 Creator/Collector: Carlhian (Firm) Physical Description: 1331.62 Linear Feet(837 boxes, 627 flatfile folders, 86 rolls) Repository: The Getty Research Institute Special Collections 1200 Getty Center Drive, Suite 1100 Los Angeles 90049-1688 [email protected] URL: http://hdl.handle.net/10020/askref (310) 440-7390 Abstract: Records of the Paris-based interior design firm, including ledgers, stock books, furniture designs, correspondence, photographs, fabric samples, drawings, and business records for the firms' Paris, London, New York, and Buenos Aires offices. Request Materials: Request access to the physical materials described in this inventory through the library catalog record for this collection. Click here for access policy . Language: Collection material is in French Organizational / Historical Note The Carlhian family operated a leading Paris-based interior design firm that specialized in interiors in the French eighteenth-century style. The firm's foundation is traced back to 1867, when Anatole Carlhian and his brother-in-law, Albert Dujardin-Beaumetz, founded the export commission business Carlhian & Beaumetz located in Paris at 30, rue Beaurepaire, close to the place de la République. The firm initially made purchases on behalf of its clients and later specialized in reproductions of period French furniture. The London dealer Duveen Brothers became an important client, using Carlhian & Beaumetz as an intermediary for its dealings in the French market not involving fine art and antique objects. -
MINI LOOM USING.Pdf
mini Loomall you need to do is weave Includes loom, two shuttles, weaving needle, beater, yarn & step-by-step instructions Glossary of Weaving Terms 1a 2 Pick: one weft pass. 1 1b Plain weave: the most basic weave, over, under, over, under. 3 Selvedge: the edge threads on a piece of weaving. 5 4 Shuttle: tool that holds the weft for weaving. Warp: the threads stretched taut on the loom. Weft: the threads that weave across the warp. 1—Mini Loom, 1a—warping teeth, 1b—tie-on holes, 2—2 shuttles, 3—1 weaving needle, 4—1 beater, 5—5 colors of yarn, plus warp yarn (not shown) Winding the Shuttle Balanced 1 2 3 4 5 6 plain weave: Equal number of warps and wefts. Secure the yarn in the center holes as shown in 1. Wrap around the length of the shuttle as shown in 2 and Weft-faced 3. plain weave: To wrap more yarn on the shuttle, wrap in a figure—8 The weft covers or fashion on one or both sides of the shuttle, as shown in partially covers the 4-6. warp. 2 Warping the Mini Loom The loom is warped •Securely tie the warp yarn to a tie-on hole. and ready for weaving. • Begin warping at the desired width of your project. • Wind back and forth, going around the warping teeth directly opposite each other. • Finish by securely tying the end in a tie-on hole. Weaving Weaving is the process of interlacing two sets of yarns: the warp that is stretched taut on the Begin by tying the end loom and the weft that crosses it. -
Introduction
Introduction From 15 to 17 September 2015, the British woollen mill Abraham Moon and Sons Ltd exhibited at Première Vision Paris, the prestigious juried trade fair for apparel fabrics. The mill was one of 1,924 exhibitors from fifty-seven countries that made their new ranges for Autumn/Winter 2016 available to some 62,000 visitors, three- quarters of whom were international. Held at the Parc des Expositions de Paris- Nord Villepint, a convention centre near the Charles de Gaulle Airport, Première Vision Paris is a biannual trade show for the six major industries that supply the global fashion industry with ingredients and services: yarns, fabrics, leather, designs, accessories and manufacturing. Launched as a modest silk exhibition in Lyon in 1973 to give the customers a ‘first look’ at the new luxury fabrics, over the past forty years Première Vision, nicknamed ‘PV’, has become Europe’s most important textile trade show for apparel.1 In many trade shows, exhibitors have wide-open booths that advertise the products to the passers-by, but at PV, the vendors and their fabrics are all hidden behind tall white barriers. The idea is to keep the samples away from the prying eyes of competitors. Admission to a particular stand is limited to the customers, and people from rival mills are not allowed in. The customers—the fabric merchandisers, fabric buyers, apparel designers and other creative staff from retailers and brands— are identified by their badges. Besides the manufacturers’ stalls, the exhibition halls have public spaces with curated exhibitions, including a major display that forecasts the upcoming season’s trends in colour, style and texture. -
Global Economic History: a Very Short Introduction Pdf, Epub, Ebook
GLOBAL ECONOMIC HISTORY: A VERY SHORT INTRODUCTION PDF, EPUB, EBOOK Robert C. Allen | 192 pages | 15 Nov 2011 | Oxford University Press | 9780199596652 | English | Oxford, United Kingdom Global Economic History: A Very Short Introduction - Very Short Introductions First, the bales of raw cotton were broken open and the dirt and debris removed. Wages were so high in England that competition with India was only possible in the coarsest fabrics. The stakes were considerable: in , Bengal spun about 85 million pounds of cotton per year, while Britain managed only 3 million. There were numerous attempts to mechanize production. Global Economic History Second, the cotton was carded, that is, the strands of cotton were aligned into a loose strand called a roving by dragging the cotton between cards studded with pins. Third, the roving was spun into yarn. Spinning was the crux of the problem, and inventors had worked on it since at least the s. Lewis Paul and John Wyatt were on the right track in the s and s with their system of roller spinning, but their mill in Birmingham always lost money. With roller spinning, the roving was stretched by pulling it through successive pairs of rollers, which, like mangles, dragged the cotton forward. Each pair of rollers moved faster than the previous, so they lengthened and thinned the yarn by pulling against each other. All of them reduced the hours of labour needed to produce one pound of yarn. At the same time, they increased the capital required per pound. As a result, the cost saving from mechanical spinning was higher where labour was more expensive.