DOCSLIB.ORG

Mineral Commodity Summaries 2011

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Mineral Commodity Summaries 2011 U.S. Department of the Interior U.S. Geological Survey MINERAL COMMODITY SUMMARIES 2011 Abrasives Fluorspar Mercury Silver Aluminum Gallium Mica Soda Ash Antimony Garnet Molybdenum Sodium Sulfate Arsenic Gemstones Nickel Stone Asbestos Germanium Niobium Strontium Barite Gold Nitrogen Sulfur Bauxite Graphite Peat Talc Beryllium Gypsum Perlite Tantalum Bismuth Hafnium Phosphate Rock Tellurium Boron Helium Platinum Thallium Bromine Indium Potash Thorium Cadmium Iodine Pumice Tin Cement Iron and Steel Quartz Crystal Titanium Cesium Iron Ore Rare Earths Tungsten Chromium Iron Oxide Pigments Rhenium Vanadium Clays Kyanite Rubidium Vermiculite Cobalt Lead Salt Wollastonite Copper Lime Sand and Gravel Yttrium Diamond Lithium Scandium Zeolites Diatomite Magnesium Selenium Zinc Feldspar Manganese Silicon Zirconium U.S. Department of the Interior KEN SALAZAR, Secretary U.S. Geological Survey Marcia K. McNutt, Director U.S. Geological Survey, Reston, Virginia: 2011 Manuscript approved for publication January 21, 2011. For more information on the USGS—the Federal source for science about the Earth, its natural and living resources, natural hazards, and the environment— visit http://www.usgs.gov or call 1–888–ASK–USGS. For an overview of USGS information products, including maps, imagery, and publications, visit http://www.usgs.gov/pubprod For sale by the Superintendent of Documents, U.S. Government Printing Office Mail: Stop IDCC; Washington, DC 20402–0001 Phone: (866) 512–1800 (toll-free); (202) 512–1800 (DC area) Fax: (202) 512–2104 Internet: bookstore.gpo.gov Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although this report is in the public domain, permission must be secured from the individual copyright owners to reproduce any copyrighted material contained within this report. Suggested citation: U.S. Geological Survey, 2011, Mineral commodity summaries 2011: U.S. Geological Survey, 198 p. ISBN 978–1–4113–3083–2 1 CONTENTS Page Page General: Introduction .................................................................... 3 Significant Events, Trends, and Issues .......................... 7 Growth Rates of Leading and Coincident Indexes for Appendix A—Abbreviations and Units of Measure .... 192 Mineral Products ......................................................... 4 Appendix B—Definitions of Selected Terms Used in The Role of Nonfuel Minerals in the U.S. Economy ...... 5 This Report .............................................................. 192 2010 U.S. Net Import Reliance for Selected Nonfuel Appendix C—Reserves and Resources ..................... 193 Mineral Materials ........................................................ 6 Appendix D—Country Specialists Directory ............... 197 Mineral Commodities: Abrasives (Manufactured) ............................................ 14 Mica (Natural), Scrap and Flake [See Mica (Natural)] Aluminum ..................................................................... 16 Mica (Natural), Sheet [See Mica (Natural)] Antimony ...................................................................... 18 Molybdenum ............................................................... 106 Arsenic ......................................................................... 20 Nickel .......................................................................... 108 Asbestos ...................................................................... 22 Niobium (Columbium) ................................................. 110 Barite ............................................................................ 24 Nitrogen (Fixed), Ammonia ........................................ 112 Bauxite and Alumina .................................................... 26 Peat ............................................................................ 114 Beryllium ...................................................................... 28 Perlite ......................................................................... 116 Bismuth ........................................................................ 30 Phosphate Rock ......................................................... 118 Boron ............................................................................ 32 Platinum-Group Metals ............................................... 120 Bromine ........................................................................ 34 Potash ........................................................................ 122 Cadmium ...................................................................... 36 Pumice and Pumicite .................................................. 124 Cement......................................................................... 38 Quartz Crystal (Industrial) .......................................... 126 Cesium ......................................................................... 40 Rare Earths ................................................................ 128 Chromium..................................................................... 42 Rhenium ..................................................................... 130 Clays ............................................................................ 44 Rubidium .................................................................... 132 Cobalt ........................................................................... 46 Salt ............................................................................. 134 Copper ......................................................................... 48 Sand and Gravel (Construction) ................................. 136 Diamond (Industrial) ..................................................... 50 Sand and Gravel (Industrial) ...................................... 138 Diatomite ...................................................................... 52 Scandium .................................................................... 140 Feldspar ....................................................................... 54 Selenium ..................................................................... 142 Fluorspar ...................................................................... 56 Silicon ......................................................................... 144 Gallium ......................................................................... 58 Silver ........................................................................... 146 Garnet (Industrial) ........................................................ 60 Soda Ash .................................................................... 148 Gemstones ................................................................... 62 Sodium Sulfate ........................................................... 150 Germanium .................................................................. 64 Stone (Crushed) ......................................................... 152 Gold .............................................................................. 66 Stone (Dimension) ...................................................... 154 Graphite (Natural) ........................................................ 68 Strontium .................................................................... 156 Gypsum ........................................................................ 70 Sulfur .......................................................................... 158 Helium .......................................................................... 72 Talc and Pyrophyllite .................................................. 160 Indium .......................................................................... 74 Tantalum ..................................................................... 162 Iodine ........................................................................... 76 Tellurium ..................................................................... 164 Iron and Steel ............................................................... 78 Thallium ...................................................................... 166 Iron and Steel Scrap .................................................... 80 Thorium ...................................................................... 168 Iron and Steel Slag ...................................................... 82 Tin ............................................................................... 170 Iron Ore ........................................................................ 84 Titanium and Titanium Dioxide ................................... 172 Iron Oxide Pigments .................................................... 86 Titanium Mineral Concentrates .................................. 174 Kyanite and Related Materials ..................................... 88 Tungsten ..................................................................... 176 Lead ............................................................................. 90 Vanadium ................................................................... 178 Lime ............................................................................. 92 Vermiculite .................................................................. 180 Lithium.......................................................................... 94 Wollastonite ................................................................ 182 Magnesium Compounds .............................................. 96 Yttrium ........................................................................ 184
Load more

Recommended publications
  • Brine Evolution in Qaidam Basin, Northern Tibetan Plateau, and the Formation of Playas As Mars Analogue Site
    45th Lunar and Planetary Science Conference (2014) 1228.pdf BRINE EVOLUTION IN QAIDAM BASIN, NORTHERN TIBETAN PLATEAU, AND THE FORMATION OF PLAYAS AS MARS ANALOGUE SITE. W. G. Kong1 M. P. Zheng1 and F. J. Kong1, 1 MLR Key Laboratory of Saline Lake Resources and Environments, Institute of Mineral Resources, CAGS, Beijing 100037, China. ([email protected]) Introduction: Terrestrial analogue studies have part of the basin (Kunteyi depression). The Pliocene is served much critical information for understanding the first major salt forming period for Qaidam Basin, Mars [1]. Playa sediments in Qaidam Basin have a and the salt bearing sediments formed at the southwest complete set of salt minerals, i.e. carbonates, sulfates, part are dominated by sulfates, and those formed at the and chlorides，which have been identified on Mars northwest part of basin are partially sulfates dominate [e.g. 2-4]. The geographical conditions and high eleva- and partially chlorides dominate. After Pliocene, the tion of these playas induces Mars-like environmental deposition center started to move towards southeast conditions, such as low precipitation, low relative hu- until reaching the east part of the basin at Pleistocene, midity, low temperature, large seasonal and diurnal T reaching the second major salt forming stage, and the variation, high UV radiation, etc. [5,6]. Thus the salt bearing sediments formed at this stage are mainly playas in the Qaidam Basin servers a good terrestrial chlorides dominate. The distinct change in salt mineral reference for studying the depositional and secondary assemblages among deposition centers indicates the processes of martian salts. migration and geochemical differentiation of brines From 2008, a set of analogue studies have been inside the basin.
    [Show full text]
  • Theories of Low Energy Nuclear Transmutations
    Theories of Low Energy Nuclear Transmutations Y. N. Srivastava Department of Physics & INFN, University of Perugia, Perugia, IT A. Widom and J. Swain Physics Department, Northeastern University, Boston MA, USA Employing concrete examples from nuclear physics it is shown that low energy nuclear reactions can and have been induced by all of the four fundamental interactions (i) (stellar) gravitational, (ii) strong, (iii) electromagnetic and (iv) weak. Differences are highlighted through the great diversity in the rates and similarity through the nature of the nuclear reactions initiated by each. PACS numbers: 26.65.+t, 96.60.Jw, 25.85.Ec, 29.25.Dz,24.75.+i, 25.85.-w, 28.41.Ak,24.75.+i I. INTRODUCTION We show below through physical examples that low energy nuclear reactions have been induced by all of the four fundamental interactions: gravitational, strong, electromagnetic and weak. Gravity: Gravitational interactions are well known to cause nuclear reactions and fusion in a star. Were it not for nuclear activity, a star would be dynamically unstable and undergo gravitational collapse[1, 2]. In fact, standard theory predicts the collapse of a star when the nuclear fuel is exhausted as the star can no longer counteract the inward compression due to gravitation. Nuclear: A laboratory example of low energy strong interaction fusion is provided by a fast discharge in fine deuterated polymer fibers. In such fibers, deuterons are accelerated to speeds high enough to overcome the barrier due to mutual Coulomb repulsion, giving rise to the production of 2:5 MeV neutrons through low energy reactions such as d + d ! n + 3He: (1) In the same set of experiments[3], also non deuterated fibers exhibit an \anomalous" production of neutrons, at a rate over 6 orders of magnitude larger than that expected through natural contamination of deuterons in a normal material.
    [Show full text]
  • Mirabilite Na2so4 • 10H2O C 2001-2005 Mineral Data Publishing, Version 1
    Mirabilite Na2SO4 • 10H2O c 2001-2005 Mineral Data Publishing, version 1 Crystal Data: Monoclinic. Point Group: 2/m. Crystals short to long prismatic, with complex form development, also crude, to 10 cm, in interlocking masses; crystalline, granular to compact massive, commonly as efflorescences. Twinning: Rare on {001} or {100}. Physical Properties: Cleavage: On {100}, perfect; on {010} and {001}, good to fair. Fracture: Conchoidal. Hardness = 1.5–2.5 D(meas.) = 1.464 D(calc.) = 1.467 Quickly dehydrates to th´enarditein dry air; very soluble in H2O, taste cool, then saline and bitter. Optical Properties: Transparent to opaque. Color: Colorless to white; colorless in transmitted light. Streak: White. Luster: Vitreous. Optical Class: Biaxial (–). Orientation: X = b; Z ∧ c =31◦. Dispersion: r< v,strong, crossed. α = 1.391–1.394 β = 1.394–1.396 γ = 1.396–1.398 2V(meas.) = 75◦560 Cell Data: Space Group: P 21/c (synthetic). a = 11.512(3) b = 10.370(3) c = 12.847(2) β = 107.789(10)◦ Z=4 X-ray Powder Pattern: Synthetic. (ICDD 11-647). 5.49 (100), 3.21 (75), 3.26 (60), 3.11 (60), 4.77 (45), 3.83 (40), 2.516 (35) Chemistry: (1) (2) SO3 25.16 24.85 Na2O 18.67 19.24 H2O 55.28 55.91 Total 99.11 100.00 • (1) Kirkby Thore, Westmoreland, England. (2) Na2SO4 10H2O. Occurrence: Typically in salt pans, playas, and saline lakes, where deposition may be seasonal, and bedded deposits formed therefrom; rarely in caves and lava tubes; in volcanic fumaroles; a product of hydrothermal sericitic alteration; a post-mining precipitate.
    [Show full text]
  • Damage to Monuments from the Crystallization of Mirabilite, Thenardite and Halite: Mechanisms, Environment, and Preventive Possibilities
    Eleventh Annual V. M. Goldschmidt Conference (2001) 3212.pdf DAMAGE TO MONUMENTS FROM THE CRYSTALLIZATION OF MIRABILITE, THENARDITE AND HALITE: MECHANISMS, ENVIRONMENT, AND PREVENTIVE POSSIBILITIES. E. Doehne1, C. Selwitz2, D. Carson1, and A. de Tagle1, 1The Getty Conservation Institute, 1200 Getty Center Drive, Suite 700, Los Angeles, CA 90049, USA, TEL: (310) 440 6237, FAX: 310 440 7711, Email: [email protected], 23631 Surfwood road, Malibu, CA, 90265, USA. Introduction: "In time, and with water, everything sulfate through columns of limestone. The limestones changes." ---Leonardo da Vinci were oolitic Monks Park stone where 90% of its pores The crystallization of soluble salts in porous building measured between 0.05-0.80 microns and Texas materials is a widespread weathering process that re- Creme, a fossilferous stone with 90% of its pore size sults in damage to important monuments and archaeo- distribution measuring between 0.5 and 3.0 microns. logical sites [1]. Salt weathering by thenardite (sodium In the absence of modifiers, sodium chloride passage sulfate) and mirabilite (sodium sulfate decahydrate) is through Monks Park limestone gave predominantly especially destructive, yet is still not fully understood subflorescence with mild edge erosion while sodium [2]. Halite (sodium chloride) in contrast, is one of the sulfate mainly effloresced and severely damaged the least damaging salts [3]. Previous work has also dem- stone column. With Texas Creme limestone, essen- onstrated the importance of airflow in salt weathering tially only efflorescence occurred with either salt and [4]. Here we present new data that help explain why there was little or no stone damage. sodium sulfate is so damaging and also show how Most crystallization inhibitors--used in industry to crystallization modifiers and changes in airflow can prevent scaling by promoting high supersaturation reduce salt damage in laboratory experiments.
    [Show full text]
  • Optical Properties of KTP Crystals and Their Potential for Terahertz Generation
    crystals Article Optical Properties of KTP Crystals and Their Potential for Terahertz Generation Alexander Mamrashev 1,* ID , Nazar Nikolaev 1 ID , Valery Antsygin 1, Yury Andreev 2,3, Grigory Lanskii 2,3 and Arkady Meshalkin 4 1 Institute of Automation & Electrometry, SB RAS, 1, Ac. Koptyug Ave., Novosibirsk 630090, Russia; [email protected] (N.N.); [email protected] (V.A.) 2 Institute of Monitoring of Climatic and Ecological Systems, SB RAS, 10/3, Akademicheskii Ave., Tomsk 634055, Russia; [email protected] (Y.A.); [email protected] (G.L.) 3 Siberian Physical Technical Institute of Tomsk State University, 1 Novosobornaya Sq., Tomsk 634050, Russia 4 Institute of Thermophysics, SB RAS, 1, Ac. Lavrent’ev Ave., Novosibirsk 630090, Russia; [email protected] * Correspondence: [email protected]; Tel.: +7-383-330-8378 Received: 30 June 2018; Accepted: 28 July 2018; Published: 31 July 2018 Abstract: High nonlinearity, wide transparency range and optical quality allowed potassium titanyl phosphate (KTiOPO4, KTP) crystals to be used in a wide range of nonlinear applications. The success of KTP usage in the visible and infrared (IR) ranges drives interest in applying it at longer wavelengths, that is, in the terahertz (THz) range. We use THz optical properties of KTP crystals measured by terahertz time-domain spectrometer (THz-TDS) and refractive index approximated in the form of Sellmeier equations to investigate KTP application possibilities for IR-to-THz and THz-to-THz wave conversion. As a result, phase matching for s − f ! f and s − f ! s types of difference frequency generation (DFG) of Ti:Sapphire laser (at the wavelengths of 0.65, 0.8 and 1.1 µm) is found possible, as well as second harmonic generation (SHG) of THz waves by f + s ! f type of interaction in the XZ principle plane of the crystal.
    [Show full text]
  • Zinnwald Lithium Project
    Zinnwald Lithium Project Report on the Mineral Resource Prepared for Deutsche Lithium GmbH Am St. Niclas Schacht 13 09599 Freiberg Germany Effective date: 2018-09-30 Issue date: 2018-09-30 Zinnwald Lithium Project Report on the Mineral Resource Date and signature page According to NI 43-101 requirements the „Qualified Persons“ for this report are EurGeol. Dr. Wolf-Dietrich Bock and EurGeol. Kersten Kühn. The effective date of this report is 30 September 2018. ……………………………….. Signed on 30 September 2018 EurGeol. Dr. Wolf-Dietrich Bock Consulting Geologist ……………………………….. Signed on 30 September 2018 EurGeol. Kersten Kühn Mining Geologist Date: Page: 2018-09-30 2/219 Zinnwald Lithium Project Report on the Mineral Resource TABLE OF CONTENTS Page Date and signature page .............................................................................................................. 2 1 Summary .......................................................................................................................... 14 1.1 Property Description and Ownership ........................................................................ 14 1.2 Geology and mineralization ...................................................................................... 14 1.3 Exploration status .................................................................................................... 15 1.4 Resource estimates ................................................................................................. 16 1.5 Conclusions and Recommendations .......................................................................
    [Show full text]
  • Mineral Commodity Summareis 2013
    U.S. Department of the Interior U.S. Geological Survey MINERAL COMMODITY SUMMARIES 2013 Abrasives Fluorspar Mercury Silver Aluminum Gallium Mica Soda Ash Antimony Garnet Molybdenum Sodium Sulfate Arsenic Gemstones Nickel Stone Asbestos Germanium Niobium Strontium Barite Gold Nitrogen Sulfur Bauxite Graphite Peat Talc Beryllium Gypsum Perlite Tantalum Bismuth Hafnium Phosphate Rock Tellurium Boron Helium Platinum Thallium Bromine Indium Potash Thorium Cadmium Iodine Pumice Tin Cement Iron and Steel Quartz Crystal Titanium Cesium Iron Ore Rare Earths Tungsten Chromium Iron Oxide Pigments Rhenium Vanadium Clays Kyanite Rubidium Vermiculite Cobalt Lead Salt Wollastonite Copper Lime Sand and Gravel Yttrium Diamond Lithium Scandium Zeolites Diatomite Magnesium Selenium Zinc Feldspar Manganese Silicon Zirconium U.S. Department of the Interior KEN SALAZAR, Secretary U.S. Geological Survey Marcia K. McNutt, Director U.S. Geological Survey, Reston, Virginia: 2013 Manuscript approved for publication January 24, 2013. For more information on the USGS—the Federal source for science about the Earth, its natural and living resources, natural hazards, and the environment— visit http://www.usgs.gov or call 1–888–ASK–USGS. For an overview of USGS information products, including maps, imagery, and publications, visit http://www.usgs.gov/pubprod For sale by the Superintendent of Documents, U.S. Government Printing Office Mail: Stop IDCC; Washington, DC 20402–0001 Phone: (866) 512–1800 (toll-free); (202) 512–1800 (DC area) Fax: (202) 512–2104 Internet: bookstore.gpo.gov Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although this report is in the public domain, permission must be secured from the individual copyright owners to reproduce any copyrighted material contained within this report.
    [Show full text]
  • Powder Synthesis and Properties of Litao3 Ceramics ⇑ Tao Yang, Yan-Gai Liu , Lei Zhang, Mei-Ling Hu, Qian Yang, Zhao-Hui Huang, Ming-Hao Fang
    Advanced Powder Technology 25 (2014) 933–936 Contents lists available at ScienceDirect Advanced Powder Technology journal homepage: www.elsevier.com/locate/apt Original Research Paper Powder synthesis and properties of LiTaO3 ceramics ⇑ Tao Yang, Yan-gai Liu , Lei Zhang, Mei-ling Hu, Qian Yang, Zhao-hui Huang, Ming-hao Fang School of Materials Science and Technology, China University of Geosciences (Beijing), Beijing 100083, PR China article info abstract Article history: The LiTaO3 powders with sub micrometer grade grain size have been synthesized successfully using a Received 26 April 2013 molten salt method. Lithium tantalate began to form at 400 °C reaction temperature and transformed Received in revised form 8 January 2014 to pure phase without residual reactants when it was processed at 500 °C for 4 h in static air. The Accepted 17 January 2014 undoped LiTaO ceramics with a Curie temperature about 663 °C were obtained by pressureless sintering Available online 28 January 2014 3 at 1300 °C for 3 h. The relative dielectric constant (er) increases from 50 to 375 at temperature ranging from 30 to 663 °C and then decreases quickly as the temperature increases above 663 °C. The ceramics Keywords: shows a relative dielectric constant of 49.4, a dielectric loss factor (tand) of 0.007, a coercive field (Ec) Lithium tantalite ceramics of 28.66 kV/cm and a remnant polarization (Pr) of 32.48 C/cm2 at room temperature. Molten salt method l Sintering Ó 2014 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Ferroelectric properties Technology Japan.
    [Show full text]
  • Mineralogy of the Martian Surface
    EA42CH14-Ehlmann ARI 30 April 2014 7:21 Mineralogy of the Martian Surface Bethany L. Ehlmann1,2 and Christopher S. Edwards1 1Division of Geological & Planetary Sciences, California Institute of Technology, Pasadena, California 91125; email: [email protected], [email protected] 2Jet Propulsion Laboratory, California Institute of Technology, Pasadena, California 91109 Annu. Rev. Earth Planet. Sci. 2014. 42:291–315 Keywords First published online as a Review in Advance on Mars, composition, mineralogy, infrared spectroscopy, igneous processes, February 21, 2014 aqueous alteration The Annual Review of Earth and Planetary Sciences is online at earth.annualreviews.org Abstract This article’s doi: The past fifteen years of orbital infrared spectroscopy and in situ exploration 10.1146/annurev-earth-060313-055024 have led to a new understanding of the composition and history of Mars. Copyright c 2014 by Annual Reviews. Globally, Mars has a basaltic upper crust with regionally variable quanti- by California Institute of Technology on 06/09/14. For personal use only. All rights reserved ties of plagioclase, pyroxene, and olivine associated with distinctive terrains. Enrichments in olivine (>20%) are found around the largest basins and Annu. Rev. Earth Planet. Sci. 2014.42:291-315. Downloaded from www.annualreviews.org within late Noachian–early Hesperian lavas. Alkali volcanics are also locally present, pointing to regional differences in igneous processes. Many ma- terials from ancient Mars bear the mineralogic fingerprints of interaction with water. Clay minerals, found in exposures of Noachian crust across the globe, preserve widespread evidence for early weathering, hydrothermal, and diagenetic aqueous environments. Noachian and Hesperian sediments include paleolake deposits with clays, carbonates, sulfates, and chlorides that are more localized in extent.
    [Show full text]
  • The Mineralogy of the British Permian Evaporites
    460 The mineralogy of the British Permian evaporites By F. H. STEWART Department of Geology, University of Edinburgh Summary. The occurrence of the minerals is reviewed. Consideration of their genesis leads to a tentative list of primary minerals, and of early diagenetie, later diagenetic and geothermal metamorphic, and late near-surface changes. N 1943 Professor Tilley recorded the occurrence of po]yhalite in the I rocks of the D'Arcy Exploration Company's E.2 borehole at Aislaby, near Whitby; this was the first published record of a potassium-bearing salt in British evaporites. The occurrence of rocks containing sylvine (Lees and Taitt, 1946) prompted further exploration by Imperial Chemical Industries and Fisons Ltd. after the war, and this showed the presence of large deposits of potassium ores in the Whitby region. There is now a considerable literature related to these, and it seems timely to give a short review of the mineralogy of the British Permian evaporites. The writer is most grateful to Fisons Ltd. who have kindly allowed him to use unpublished information from his study of their boreholes F.1 at Robin Hood's Bay, F.2 at Staintondale, F.3 at Little Beck, and F.4 at Hawsker, in the Whitby Scarborough district. The position of these and the other boreholes mentioned in this paper can be found in the map of Dunham (1960). Dist~'ibution of the minerals The evaporites occur in two principal areas east and west of the Pennine Hills. In the western area (the Vale of Eden, west Cumberland, and the Furness district of Lancashire), where four evaporite beds have been recognized (Hollingworth, 1942), the mineralogy is relatively simple; carbonates, anhydrite, and gypsum are the main constituents.
    [Show full text]
  • Tourmalines and Relaxor Ferroelectrics of The
    Correlations between Crystal Structure and Elastic Properties of Piezoelectric Crystals: Tourmalines and Relaxor Ferroelectrics of the type CaxBa1-xNb2O6 and Ce:CaxBa1-xNb2O6 DISSERTATION zur Erlangung des akademischen Grades eines “Doktor der Naturwissenschaften” an der Fakultät für Geowissenschaften der Ruhr-Universität Bochum Germany von Chandra Shekhar Pandey aus Bareilly (India) Bochum, 2010 1. Gutachter Prof. Dr. Jürgen Schreuer 2. Gutachter Prof. Dr. Ladislav Bohatý Datum der Vorlage 20.10.2010 Datum der Disputation 17.12.2010 “If we knew what we were doing, it wouldn't be research” Albert Einstein This thesis is dedicated to My Love Arti & My sweet ‘n’ cute loving daughter Aditi Abstract In this thesis the elastic properties of two distinct groups of piezoelectric crystals are presented: one is natural tourmaline occurring with a vast variability in chemical compositions with a stable phase over a wide temperature range and hence allowing to examine the influence of chemical composition on its physical properties; while the other is synthetically grown relaxor ferroelectric calcium barium niobate (CBN) exhibiting a ferroelectric-paraelectric phase transition and thus invoking the interest to investigate the variation of elastic properties in both phases as well as in the vicinity of the phase transition. To this end the non-destructive innovative method of resonant ultrasound spectroscopy (RUS) was employed. The full sets of elastic, piezoelectric, dielectric constants and coefficients of thermal expansion of five natural single crystal tourmalines of gem quality have been determined between 100 K and 903 K. The main influence of Li and Fe on elastic, piezoelectric and dielectric properties of tourmalines was studied.
    [Show full text]
  • Crystallization of Kainite from Solutions in Syste
    ineering ng & E P l r a o c i c e m s e s Journal of h T C e f c h o Kostiv and Basystiuk, J Chem Eng Process Technol 2016, 7:3 l ISSN: 2157-7048 n a o n l o r g u y o J Chemical Engineering & Process Technology DOI: 10.4172/2157-7048.1000298 Research Article Article OpenOpen Access Access + 2+ + - 2- Crystallization of Kainite from Solutions in System K , Mg , Na // Cl , SO4 -Н2О Kostiv IY1 and Yа І Basystiuk2* 1State Enterprise Scientific - Research Gallurgi Institute 5a, Fabrichna Str., 76000 Kalush, Ukraine 2Precarpathian National University named after V. Stephanyk 57, Shevchenko Str., 76025 Ivano-Frankivsk, Ukraine Abstract In isothermal conditions have been studied the influence of system solution sea salts during their evaporation and crystallization to composition of received liquid and solid phases. It is shown that evaporation of the solution leading 2- to its supersaturation by sulfate salts. In the liquid phase before crystallization of kainite concentration of SO4 ions increases to 10% and above. Through this probability of formation of crystals increases and the result of evaporation 2- is the formation of finely dispersed kainite. During crystallization of kainite concentration of SO4 in the liquid phase 2- 2+ decreases rapidly. Decreasing its intensity increases with increasing value k=E SO4 : E Mg of initial solution. For 2- the degree of evaporation of 20.0% and 31.0% concentration of SO4 in evaporated solution on the value of k does not change. Most forms of potassium salts in the solid phase for the value k=0.7573 and reaches a maximum value at 82% evaporation rate of 31%.
    [Show full text]