SKY Kit Installation Guide

Aquavision SKY Kit allows you to control your SKY satellite channels on you Aquavision Television*. It is compatible with all current SKY Boxes (exc SKY Q).

Parts supplied

SKY Kit

Installation

1. Connect one end of the 2. Remove the protective 3. Plug the small black plug attached to connector cable to the sticker from the PCB the SKY Kit into the top socket on the Aerial input of your TV. circuitboard at the bottom of the TV.

4. Plug your TV aerial feed into 5. The SKY signal will appear on the Analogue TV channels after you have the other end of the SKY Kit. tuned it in. Please refer to you TV instruction guide for details on how to carry this out. Please follow your SKY user guide to ensure correct set up of your SKY box.

This equipment is not compatible with Virgin or BT Vision

For further details on any other products in the Aquavision range, please contact your supplier.

Sky”, “Sky Digibox”, and “Sky Magic Eye” are registered trade marks of BSKYB Ltd. The specifications shown were accurate at time of going to press. AQUAVISION’S® policy of continuous development means some changes may take place. Please check with the office for confirmation. All screen pictures simulated. All names and trademarks acknowledged. E. & O.E. * when installed correctly. REV 5.0

HEAD OFFICE AND FACTORY AMERICAN OFFICE Aquavision Aquavision, Inc. [email protected] Unit 7 Riverpark, Billet Lane #197 [email protected] Berkhamsted, Hertfordshire 5 Southside Drive, Suite 11 HP4 1HL Clifton Park, NY 12065 www.aquavsion.tv United Kingdom America +44 [0]1442 872665 +1 800 524 1804 www.aquavision.us