EXTERIOR

DILUNETT® AND REMOVER

Product description DILUNETT® is a powerful, water washable solvent free paint stripper that will remove any oil and alkyd based paint, or woodstain. Requiring no supervision or immediate removal of the softened , DILUNETT® strips up to 8 coats of finish in one application. Suitable for virtually any surface including , metal, plastic and GRP, DILUNETT®’s consistency means it will not run, making it ideal for vertical surfaces and elaborate plaster or wood designs needing to be stripped. Easy to apply, DILUNETT® dissolves paint in the smallest recess and on the finest detail, softening all accumulated layers for simple, clean removal. VOC free and non flammable, DILUNETT® is safe to use in poorly ventilated or confined areas. Properties • Solvent free - No toxic fumes. • Easily removed with water. • DILUNETT® is safe on all surfaces except aluminium. • Does not harm plastic. Safe on gelcoat. • Removes up to 8 coats of paint in one operation. • Does not evaporate - Long active work time. • Easy to apply. Gel - Does not run. Basic uses • For exterior use only. • Removes , stains, ... • Works on metal**, wood**, plastic, gelcoat, stone, cement... • Horizontal or vertical surfaces. ** See “Restrictions” Technical data Viscosity: Gel. Specific Gravity (at + 20°C): 1.10 ± 0.05. Physical State: Viscous liquid. Flammability: Non flammable. Shelf Life: 12 months in original unopened container. Container Size: 500ml, 1L, 2.5L, 10L. Appearance & odour: Creamy, caustic soda smell. his supervision. under made not products of application the manufacturer, the of responsibility the not are and illustrative purely are set out cons information The Average working times: 1 Coat 2 Coats 3 Coats Alkyd/Oil paint, stains and varnishes 5 - 15 min. 10 - 30 min. 15 - 45 min. Test on small area Acrylic paint, stains and varnishes to determine working time Note: The above are average working times only. A test should be carried out to determine the actual contact time required to remove the requisite number of coats. VOC: Out of scope. Restrictions DILUNETT® will not remove the following types of coatings 2 pack or baked on paints. Polyurethane paint and varnish. Do not use on “weak” such as veneers. Do not use on aluminium. Application Flat blade or a brush with synthetic (nylon) “bristles”. Powerwasher. Issue date Safety General information Storage Clean-up Coverage Neutralisation Application Surface preparation practice Good application Owa trol In terna Barcelona - Spain Barcelona tional S LU March 2012. Keep outof the reach of children. Refer tothe safetydata sheet (MSDS) availableatwww.owatrol.com and text onthe packaging. the technical data sheet. All other OWATROL products named inthisdocument should beusedasperlabelinstructions and The information aboveiscorrect atthe date of issue. technical department byemail [email protected] orthe localOwatrol Agent for yourcountry under which ourproducts are applied. Forfurther advice and information pleasecontact our O Every care istaken toensure thatthe information provided inthistechnical data sheet isaccurate. Keep from freezing and awayfrom high temperatures. containers. Store unused product in atightly closedplastic orglasscontainer. DONOT store product inmetal Water. Actual coverage willvarydepending onapplication method, type, texture, age and porosity of the surface. 4 m Always useNET-TROL®* toneutralise strippedporous and wooden surfaces. . NB: Consultusfor additional information andadvicepriortousingDILUNETT®onOak still wettoneutralise the surface. After stripping and rinsing. Allporous surfaces must beimmediately treated withNET-TROL®* while Thoroughly rinse surface withfresh cleanwater. NB: The useof hot watermakes the jobeasier. flushing withwater, alternatively useapressure washer (max 60bars/870psi). Remove DILUNETT®and dissolvedpaint withastiffnylon scrubbing brushorpaint scraper while Allow product towork. work large areas inzones toavoid excessive darkening of the wood. Apply athick coatof DILUNETT®overthe whole surface tobestripped. Forwoodsrich intannins, Brush off any physical surface contamination i.e. moss, general dirtetc. Remove any looseand flaking paint. Chestnut. Consult usfor additionalinformation andadvicepriortousingDILUNETT®onOak water. Do not allowDILUNETT®to dry onthe surface. Ifdrying occursdampen withmistapplication of Apply between5°Cand 35°C. Donot applyindirect sunlight oronahot surface. Cover and protect everything youdo not wishtostrip,including plants and shrubs. Treat strippedwooden surfaces withNET-TROL®* torestore the woodsoriginal colour. Where DILUNETT®hasdarkened the woodDONOT allowittodry, prior tousing NET-TROL®*. prolonged contact withDILUNETT®. , especially those rich intannins (, ,, Chestnut…) canturndark ifin For bestresults onwood, do not letDILUNETT®worklonger thanrequired todissolvethe paint. Wear chemical resistant gloves, safetygoggles and protective clothing. Always carryoutapreliminary testtodetermine the contact time required for stripping. w atrol Internationalisunable toguarantee results aswehaveno control overthe conditions 2 perlitre. DILUNETT ® isatrademark www.owatrol.com Find allour solutions: * Same manufacturer

09/12 - RCS Tours 331 998 484 The information set out cons are purely illustrative and are not the responsibility of the manufacturer, the application of products not made under his supervision.