DOCSLIB.ORG

EG 200 053 V1.4.1 (2002-06) ETSI Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
EG 200 053 V1.4.1 (2002-06) ETSI Guide ETSI EG 200 053 V1.4.1 (2002-06) ETSI Guide Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio site engineering for radio equipment and systems 2 ETSI EG 200 053 V1.4.1 (2002-06) Reference REG/ERM-TG27-003 Keywords mobile, radio, site engineering ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [email protected] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. © European Telecommunications Standards Institute 2002. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI EG 200 053 V1.4.1 (2002-06) Contents Intellectual Property Rights................................................................................................................................9 Foreword.............................................................................................................................................................9 Introduction ........................................................................................................................................................9 1 Scope ......................................................................................................................................................11 2 References ..............................................................................................................................................11 3 Definitions, symbols and abbreviations .................................................................................................12 3.1 Definitions........................................................................................................................................................12 3.2 Symbols............................................................................................................................................................13 3.3 Abbreviations ...................................................................................................................................................13 4 Choice of site..........................................................................................................................................15 4.1 General .............................................................................................................................................................15 4.2 Radio site selection criteria ..............................................................................................................................15 4.2.1 Location chosen by propagation analysis ...................................................................................................16 4.2.2 Availability of capacity on existing sites ....................................................................................................16 4.2.3 Compatibility ..............................................................................................................................................16 4.2.4 Environmental and planning considerations ...............................................................................................17 5 System requirements ..............................................................................................................................17 5.1 Private Mobile Radio (PMR)............................................................................................................................17 5.1.1 Introduction.................................................................................................................................................17 5.1.2 Analogue PMR systems..............................................................................................................................18 5.1.2.1 Public Access Mobile Radio .................................................................................................................18 5.1.3 Digital PMR systems ..................................................................................................................................19 5.1.3.1 TETRA..................................................................................................................................................20 5.1.3.2 Other Commercial Systems...................................................................................................................20 5.1.3.3 Frequency planning - direct mode.........................................................................................................21 5.1.3.4 Introduction of Trunked Radio Base stations onto Existing Radio Sites ..............................................21 5.1.4 Potential sources of interference.................................................................................................................21 5.2 Paging...............................................................................................................................................................21 5.2.1 Introduction.................................................................................................................................................21 5.2.2 On-site radio paging system........................................................................................................................21 5.2.3 Wide area paging systems...........................................................................................................................21 5.2.4 Signalling systems ......................................................................................................................................22 5.2.5 Coverage in confined spaces.......................................................................................................................22 5.3 Public radiotelephone.......................................................................................................................................22 5.3.1 Introduction.................................................................................................................................................22 5.3.2 Public radiotelephone (analogue) ...............................................................................................................23 5.3.2.1 Frequency re-use ...................................................................................................................................23 5.3.2.2 Hand-over..............................................................................................................................................23 5.3.3 Public radiotelephone (digital) - GSM/DCS 1 800.....................................................................................23 5.3.3.1 Databases ..............................................................................................................................................23 5.3.3.2 Radio.....................................................................................................................................................24 5.3.3.3 Traffic and signalling channel...............................................................................................................24 5.3.4 Use of repeaters ..........................................................................................................................................25 5.4 Confined space engineering .............................................................................................................................25 5.4.1 Introduction.................................................................................................................................................25 5.4.2 Characteristics of radiating cable................................................................................................................25 5.4.3 Confined space radiocommunication systems ............................................................................................25 5.4.3.1 Antenna characteristics .........................................................................................................................26 5.4.3.2 Recommendations for frequency range 150 kHz to 1 000 MHz...........................................................26
Load more

Recommended publications
  • Electronic Warfare Fundamentals
    ELECTRONIC WARFARE FUNDAMENTALS NOVEMBER 2000 PREFACE Electronic Warfare Fundamentals is a student supplementary text and reference book that provides the foundation for understanding the basic concepts underlying electronic warfare (EW). This text uses a practical building-block approach to facilitate student comprehension of the essential subject matter associated with the combat applications of EW. Since radar and infrared (IR) weapons systems present the greatest threat to air operations on today's battlefield, this text emphasizes radar and IR theory and countermeasures. Although command and control (C2) systems play a vital role in modern warfare, these systems are not a direct threat to the aircrew and hence are not discussed in this book. This text does address the specific types of radar systems most likely to be associated with a modern integrated air defense system (lADS). To introduce the reader to EW, Electronic Warfare Fundamentals begins with a brief history of radar, an overview of radar capabilities, and a brief introduction to the threat systems associated with a typical lADS. The two subsequent chapters introduce the theory and characteristics of radio frequency (RF) energy as it relates to radar operations. These are followed by radar signal characteristics, radar system components, and radar target discrimination capabilities. The book continues with a discussion of antenna types and scans, target tracking, and missile guidance techniques. The next step in the building-block approach is a detailed description of countermeasures designed to defeat radar systems. The text presents the theory and employment considerations for both noise and deception jamming techniques and their impact on radar systems.
    [Show full text]
  • Noise and Frequency Modulation: Effects of Noise on Carrier—Noise Triangle
    Noise and Frequency Modulation: Frequency Modulation is much more immune to noise than amplitude modulation and is significantly more immune than phase modulation. In order to establish the reason for this and to determine the extent of the improvement, it is necessary to examine the effect of noise on a carrier. The effect of noise in FM does not remain constant but it increases with the increase in frequency of mod s/g. Assuming a single noise frequency, that will also modulate the constant carrier Vc, we get a modulation index due to noise as M = Vn/Vo. Mfn=δfn As modulating s/g frequency increases, modulating index due to mod. s/g decreases. Mfs=δfs ∴The s/g to noise ratio in FM. =SN=MfsMfn ∴ As fs ↑, Mfs ↓ ∴ S/N ↓ ∴ A plot of S/N v/s frequency is not uniform rather a triangle. this is called as Noise Triangle. Pre-emphasis & De-emphasis is performed to avoid this non-uniform S/N. Effects of Noise on Carrier—Noise Triangle: A single Noise and Frequency Modulation will affect the output of a receiver only if it falls within its bandpass. The carrier and noise voltages will mix, and if the difference is audible, it will naturally interfere with the reception of wanted signals. If such a single-noise voltage is considered vectorially, it is seen that the noise vector is superimposed on the carrier, rotating about it with a relative angular velocity ωn-ωc. This is shown in Figure 5-5. The maximum deviation in amplitude from the average value will be Vn, whereas the maximum phase -1 deviation will be Φ = sin (Vn/Vc).
    [Show full text]
  • GENERAL ACRONYMS for EMS COMMUNICATIONS BPS—Bits Per Second
    GENERAL ACRONYMS FOR EMS COMMUNICATIONS BPS—bits per second. BSC—binary synchronous communications A C AA—above average terrain C—Celsius AC—alternating current CAD—computer –aided Dispatch ACD—automatic call distributor CB—citizens band ACLS—advanced cardiac life support CCH—computerized criminal history ACSB—amplitude compandored single- CCITT—International Telegraph And sideband Telephone Consultative Committee ADP—automatic data processing CCSA—common control switching AGL—above ground level arrangement ALS—advanced life support CCTV—closed circuit television ALERT—automatic law enforcement CCU—Coronary Care Unit or Critical Care response team Unit ALI—automatic location identification CDC—Cooperative Dispatch Center AM—amplitude modulation CG—Channel Guard(R) Trademark of AMSL—above mean sea level General Electric ANI—automatic number identification CMED—Central Medical Emergency APB—all points bulletin Dispatch APCO—Associated Public-Safety CMR—Common Mode Rejection Communications Officers CMRR—Common Mode Rejection Radio ASCII—American Standard Code for CNIL—Calling Number Identification and Information Interchange Location ASTM—American Society for Testing and CO—Central Office Materials. COG—Council of Governments ASTRA—Automated Statewide COR—Coronary Observation Radio Telecommunications And Records Access CPR—cardiopulmonary resuscitation ATLS—Advanced Trauma Life Support CJIS—Criminal Justice Information System AT&T—American Telephone and CTCSS—Continuous Tone Controlled Telegraph Company Squelch System AVC—automatic volume
    [Show full text]
  • On Capture Effect of FM Demodulators
    Calhoun: The NPS Institutional Archive Theses and Dissertations Thesis Collection 1989 On capture effect of FM demodulators. Park, Soon Sang Monterey, California. Naval Postgraduate School http://hdl.handle.net/10945/26120 -^L _ .GHOOL RliY, C. j.A 9S84o-600«i NAVAL POSTGRADUATE SCHOOL Monterey, California ON CAPTURE EFFECT OF FM DEMODULATORS by Park Soon Sang * m » March 1989 Th esis Advisor Glen A. Myers Approved for public release; distribution is unlimited TPiiPP^P UNCLASSIFIED SECURiTv CLASS'FiCATlON OF THIS PAGE form Approved 1 REPORT DOCUMENTATION PAGE 0MB No 07040181 la REPORT SECUR'TY CLASSIFICATION lb RESTRICTIVE MARKINGS UNCLASSIFIED 2a SECURITY CLASSIFICATION AUTHORITY 3 DiSTRIBUTlON/AVAiLABlLiTY OF REPQP' Approved for public release; ,2b DECLASSIFICATION . DOWNGRADING SCHEDULE distribution is unlimited 4 PERFORMING ORGANIZATION REPORT NUMBER(S) 5 MONITORING ORGANIZATION REPORT r,uVB?PiS, 6a NAME OF PERFORMING ORGANIZATION 6b OFFICE SYMBOL 7a NAME OF MONITORING ORGAN ZAT ON (If applicable) Naval Postgraduate School 62 Naval Postgraduate School 6c ADDRESS {City, State, and ZIP Code) 7b ADDRESS (C/fy, State, andZiPCode) Monterey, California 93943-5000 Monterey, California 93943-5000 8a NAME OF FUNDING /SPONSORING 8b OFFICE SYMBOL 9 PROCUREMENT INSTRUMENT IDENTIFICATION NUMBER ORGANIZATION (If applicable) 8c ADDRESS fC/ty, State, a nc/ Z/P Code) 10 SOURCE OF FUNDING NUMBERS PROGRAM PROJECT TASK ,VOP- UNiT ELEMENT NO NO NO ACCESSION 1 1 TITLE (Include Security Classification) ON CAPTURE EFFECT OF FM DEMODULATORS 12 PERSONAL AUTHOR{S)
    [Show full text]
  • Fm Capture Effect
    ROHINI COLLEGE OF ENGINEERING AND TECHNOLOGY Fm Capture Effect: A phenomenon, associated with FM reception, in which only the stronger of two signals at or near the same frequency will be demodulated The complete suppression of the weaker signal occurs at the receiver limiter, where it is treated as noise and rejected. When both signals are nearly equal in strength, or are fading independently, the receiver may switch from one to the other. In the frequency modulation, the signal can be affected by another frequency modulated signal whose frequency content is close to the carrier frequency of the desired FM wave. The receiver may lock such an interference signal and suppress the desired FM wave when interference signal is stronger than the desired signal. When the strength of the desired signal and interference signal are nearly equal, the receiver fluctuates back and forth between them, i.e., receiver locks interference signal for some times and desired signal for some time and this goes on randomly· This phenomenon is known as the capture effect. Pre-Emphasis & De-Emphasis: Pre-emphasis refers to boosting the relative amplitudes of the modulating voltage for 1. Pre-Emphasis Circuit: At the transmitter, the modulating signal is passed through a simple network which amplifies the high frequency, components more than the low-frequency components. The simplest form of such a circuit is a simple high pass filter of the type shown in fig (a). Specification dictate a time constant of 75 microseconds (µs) where t = RC. Any combination of resistor and capacitor (or resistor and inductor) giving this time constant will be satisfactory.
    [Show full text]
  • FM 24-18. Tactical Single-Channel Radio Communications
    FM 24-18 TABLE OF CONTENTS RDL Document Homepage Information HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, D.C. 30 SEPTEMBER 1987 FM 24-18 TACTICAL SINGLE- CHANNEL RADIO COMMUNICATIONS TECHNIQUES TABLE OF CONTENTS I. PREFACE II. CHAPTER 1 INTRODUCTION TO SINGLE-CHANNEL RADIO COMMUNICATIONS III. CHAPTER 2 RADIO PRINCIPLES Section I. Theory and Propagation Section II. Types of Modulation and Methods of Transmission IV. CHAPTER 3 ANTENNAS http://www.adtdl.army.mil/cgi-bin/atdl.dll/fm/24-18/fm24-18.htm (1 of 3) [1/11/2002 1:54:49 PM] FM 24-18 TABLE OF CONTENTS Section I. Requirement and Function Section II. Characteristics Section III. Types of Antennas Section IV. Field Repair and Expedients V. CHAPTER 4 PRACTICAL CONSIDERATIONS IN OPERATING SINGLE-CHANNEL RADIOS Section I. Siting Considerations Section II. Transmitter Characteristics and Operator's Skills Section III. Transmission Paths Section IV. Receiver Characteristics and Operator's Skills VI. CHAPTER 5 RADIO OPERATING TECHNIQUES Section I. General Operating Instructions and SOI Section II. Radiotelegraph Procedures Section III. Radiotelephone and Radio Teletypewriter Procedures VII. CHAPTER 6 ELECTRONIC WARFARE VIII. CHAPTER 7 RADIO OPERATIONS UNDER UNUSUAL CONDITIONS Section I. Operations in Arcticlike Areas Section II. Operations in Jungle Areas Section III. Operations in Desert Areas Section IV. Operations in Mountainous Areas Section V. Operations in Special Environments IX. CHAPTER 8 SPECIAL OPERATIONS AND INTEROPERABILITY TECHNIQUES Section I. Retransmission and Remote Control Operations Section II. Secure Operations Section III. Equipment Compatibility and Netting Procedures X. APPENDIX A POWER SOURCES http://www.adtdl.army.mil/cgi-bin/atdl.dll/fm/24-18/fm24-18.htm (2 of 3) [1/11/2002 1:54:49 PM] FM 24-18 TABLE OF CONTENTS XI.
    [Show full text]
  • Lecture 28-29 FM- Frequency Modulation PM
    FM and PM Lecture 28-29 for FM: FM- Frequency Modulation PM - Phase Modulation Relationship between mf(t) and mp(t): EE445-10 1 3 FM and PM Figure 5–8 Angle modulator circuits. RFC = radio-frequency choke. Dp is the phase sensitivity or phase modulation constant 2 4 Couch, Digital and Analog Communication Systems, Seventh Edition ©2007 Pearson Education, Inc. All rights reserved. 0-13-142492-0 FM and PM FM and PM 5 7 Figure 5–9 FM with a sinusoidal baseband modulating signal. FM and PM differences PM: phase is proportional to m(t) θ (t) = Dpm(t) ⇒ FM: t θ (t) = D f m(α)dα ∫−∞ instantaneous frequency deviation from the fi (t) − fc = D f m(t) ⇒ carrier is proportional to m(t) radians Dp = K p ⇒ Modulation volt Constants Hz D f = K f ⇒ 6 volt 8 Couch, Digital and Analog Communication Systems, Seventh Edition ©2007 Pearson Education, Inc. All rights reserved. 0-13-142492-0 FM from PM FM and PM Signals PM from FM Maximum phase deviation in PM: Maximum frequency deviation in FM: 9 11 FM from PM Example PM from FM Let For PM For FM Define the modulation indices: 10 12 Example Spectrum Characteristics of FM Define the modulation indices: • FM/PM is exponential modulation Let φ(t) = β sin(2πfmt) u(t) = Ac cos(2πfct + β sin(2πfmt)) j(2πfct+β sin(2πfmt)) = Re()Ace u(t) is periodic in fm we may therefore use the Fourier series 13 15 Sine Wave Example Spectrum Characteristics of FM Then • FM/PM is exponential modulation c(t) = Ac cos(2πfct + β sin(2πfmt)) j(2πfct+β sin(2πfmt)) = Re()Ace c(t) is periodic in fm we may therefore use the Fourier series 14 16 Spectrum Characteristics with J Bessel Function Sinusoidal Modulation n u(t) is periodic in fm we may therefore use the Fourier series 17 19 Figure 5–11 Magnitude spectra for FM or PM with sinusoidal modulation for various modulation indexes.
    [Show full text]
  • About FM If You Learn Its Fundamentals, You Can Demystify FM’S Seemingly Complex Behavior
    By H. Ward Silver, NØAX About FM If you learn its fundamentals, you can demystify FM’s seemingly complex behavior. MARVIN COLLINS, W6OQI he first practical frequency modu- lation (FM) systems were devel- Toped by Major Edwin Howard Arm- strong, the prolific radio inventor, in the early 1930s. They offered immediate advantages over competing AM systems—higher fidelity and lower noise—advantages that are still true today.1 As a result, FM systems are in wide use by people around the world, not only radio amateurs, as versatile communi- cations and broadcast transmission mediums. It is the rare ham that has not used a portable or handheld transceiver on a repeater or a simplex frequency—many amateurs use it as their exclusive communications mode. Even though FM is widely used, it is often poorly understood. The basic idea is straightforward—make the RF signal’s frequency, rather than its amplitude, rise and fall with the modulating signal. One can quite easily imagine the result—as the amplitude of the message changes, the RF Modulation Index signal’s frequency changes—tracking each peak and valley as shown in Figure 1. The Just as amplitude modulation (AM) has creation of this signal requires an interesting a modulation index that measures the degree and surprising bag of tricks, as we shall see. to which the message is modulating the RF signal, so does angle modulation. For AM, Some Useful Concepts the index measures the amplitude relation- Instantaneous Frequency and Deviation ship between the single pair of sidebands and the carrier. Angle-modulated signals Let’s start by learning the appropriate have more than one set of sidebands—two, terminology so that we can be precise in three, five or more, depending on how the our discussion.
    [Show full text]
  • Receiving FM Squelch Quieting Specification Capture Effect
    FM reception specifications including the FM capture ratio and its associated capture effect, along with the FM quieting figures and facilities including squelch are of great importance to users of FM systems. Frequency modulation, FM is widely used in radio communications and broadcasting, particularly on frequencies above 30 MHz. It offers many advantages, particularly in mobile radio applications where its resistance to fading and interference is a great advantage. It is also widely used for broadcasting on VHF frequencies where it is able to provide a medium for high quality audio transmissions. Receiving FM In order to be able to receive FM a receiver must be sensitive to the frequency variations of the incoming signals which may be wide or narrow band. However the set is made insensitive to the amplitude variations. This is achieved by having a high gain IF amplifier. Here the signals are amplified to such a degree that the amplifier runs into limiting. In this way any amplitude variations are removed and this improves the signal to noise ratio after the point when the signal limits in the IF stages. However the high levels of gain associated with the limiting process mean that when no signal is present, very high levels of noise appear at the output of the FM demodulator. Squelch To overcome the problem of the high noise levels when no signal is present a circuit known as "squelch" is normally used. This detects when no signal is present and cuts the audio, thereby removing the noise under these conditions. The level for this is normally present in domestic radios, but there is often a level adjustment for PMR or handheld transceivers, or for scanners and professional receivers.
    [Show full text]
  • Fm Wireless Microphone Kit
    FM WIRELESS MICROPHONE KIT MODEL K-30/AK-710 Assembly and Instruction Manual Elenco® Electronics, Inc. Copyright © 2006, 1994 by Elenco® Electronics, Inc. All rights reserved. Revised 2006 REV-J 753016 No part of this book shall be reproduced by any means; electronic, photocopying, or otherwise without written permission from the publisher. PARTS LIST If you are a student, and any parts are missing or damaged, please see instructor or bookstore. If you purchased this kit from a distributor, catalog, etc., please contact Elenco® Electronics (address/phone/e-mail is at the back of this manual) for additional assistance, if needed. DO NOT contact your place of purchase as they will not be able to help you. RESISTORS Qty. Symbol Value Color Code Part # 1 R5 150Ω 5% 1/4W brown-green-brown-gold 131500 2 R8, R10 1kΩ 5% 1/4W brown-black-red-gold 141000 1 R7 1.5kΩ 5% 1/4W brown-green-red-gold 141500 1 R3 4.7kΩ 5% 1/4W yellow-violet-red-gold 144700 1 R1 8.2kΩ 5% 1/4W gray-red-red-gold 148200 1 R6 10kΩ 5% 1/4W brown-black-orange-gold 151000 1 R2 27kΩ 5% 1/4W red-violet-orange-gold 152700 2 R4, R9 47kΩ 5% 1/4W yellow-violet-orange-gold 154700 CAPACITORS Qty. Symbol Value Description Part # 1 C4 10pF (10) Discap 211011 1 C5 12pF (12) Discap 211210 1 C6 33pF (33) Discap 213317 2 C3, C7 .001µF (102) Discap 231035 2 C1, C2 .1µF (104) Discap 251010 SEMICONDUCTORS Qty. Symbol Value Description Part # 3 Q1 - Q3 2N3904 Transistor 323904 1 LED Light Emitting Diode (LED) 350001 1 Coil FM Mic 468751 MISCELLANEOUS Qty.
    [Show full text]
  • Radio Operator's Handbook
    MCRP 3-40.3B (Formerly MCRP 6-22C) Radio Operator's Handbook U.S. Marine Corps PCN 144 00067 00 DEPARTMENT OF THE NAVY Headquarters United States Marine Corps Washington, D.C. 20380-1775 2 June 1999 FOREWORD Marine Corps Warfighting Publication (MCWP) 6-22, Communications and Information Systems, provides the doctrine and tactics, techniques, and procedures for the conduct of communications and information sys- tems across the spectrum of Marine air-ground task force (MAGTF) operations. Marine Corps Reference Publication (MCRP) 6-22C, Radio Operator’s Handbook, complements and expands upon this information by detailing doctrine, tactics, techniques, and procedures for operating single-channel high frequency (HF), very high frequency (VHF), and ultrahigh frequency (UHF) radios. The primary target audience for this publication is Marine Corps radio operators and other users of single- channel radios. MCRP 6-22C describes— l Basic radio principles. l Single-channel radio. l Equipment sighting and grounding techniques. l Antennas. l Interference. l Radio operations under unusual conditions. l Electronic warfare. MCRP 6-22C provides the requisite information needed by Marine radio operators to understand, plan, and execute successful single-channel radio operations in support of the MAGTF. MCWP 6-22C supersedes FMFM 3-35, Radio Operator’s Handbook, dated 26 September 1991. Reviewed and approved this date. BY DIRECTION OF THE COMMANDANT OF THE MARINE CORPS J. E. RHODES Lieutenant General, U.S. Marine Corps Commanding General Marine Corps Combat Development Command DISTRIBUTION: 144 000067 00 Toc.fm Page 1 Friday, June 25, 1999 10:49 AM Radio Operator’s Handbook Table of Contents Page Chapter 1.
    [Show full text]
  • EXTRA (11) 4,087,750 Allen Et Al
    * 5-28 SR 3 f. X 3 4 O 87, 75) United States Patent (19) EXTRA (11) 4,087,750 Allen et al. 45) May 2, 1978 54) RECEIVER FOR DETECTING AND Attorney, Agent, or Firm-Nathan Edelberg; Sheldon ANALYZING AMPLITUDE OR ANGLE Kanars; Jeremiah G. Murray MODULATED WAVES IN THE PRESENCE OF INTERFERENCE 57 ABSTRACT This receiver includes in its IF channel a summing net (75) Inventors: Joseph A. Allen, Eatontown; William work by means of which the output of a calibrated R. Fuschetto, Freehold, both of N.J. reference oscillator may be added to the received sig (73) Assignee: The United States of America as nals. The frequency and amplitude of the reference represented by the Secretary of the oscillator are adjusted to match those of a desired one of Army, Washington, D.C. several co-channel signals which may be simultaneously present in the IF channel. The combined signals are 21 Appl. No.: 731,662 amplitude limited and applied to a frequency deviation 22 Filed: May 23, 1968 detector in which the wide frequency deviations caused (51) Int. Cl” ........................ H04B 1/10; H04B 17/00 by the interaction of the reference and desired signal are (52) U.S. C. .................................... 325/363; 325/346; detected. The technique can be used to demodulate 325/473; 325/476; 325/482 angle or amplitude modulated signals obscured by jam (58) Field of Search ............... 325/344, 348, 346, 472, ming signals and to measure the frequency and ampli 325/476, 481,482, 473, 363; 324/77A, 77 B tude of signals which are similarly obscured.
    [Show full text]