DOCSLIB.ORG

Summer, All-Season and Winter Tyres 2018 Passenger Car and Van

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Summer, All-Season and Winter Tyres 2018 Passenger Car and Van SUMMER, ALL-SEASON AND WINTER TYRES 2018 PASSENGER CAR AND VAN SPORTY. STRONG. SAFE! Viking. A brand of Continental. SUMMER TYRES 2018 SPORTY. STRONG. SAFE! Viking is a brand of Continental, developed in Germany and manufactured in Europe. With more than 80 years of experience ProTech HP CityTech II TransTech II as a European tyre manufacturer and the continuous further development of For middle-class vehicles For compact- and For transporter our products in state-of-the-art develop- and executive cars. middle-class cars. and vans. ment centres, Viking stands for cutting- edge technology. Convincing ALL-SEASON & WINTER TYRES 2017/18 quality features Sporty: Outstanding performance, even for powerful vehicles Strong: Durable products which deliver even in demanding conditions FourTech FourTech Van WinTech WinTech Van Safe: For compact- and For transporter For compact- and For transporter Reliable protection due to state-of-the- middle-class cars. and vans. middle-class cars. and vans. art technology 2 3 ProTech HP The UHP tyre CityTech II The compact tyre The well balanced high performance tyre The CityTech II is an economical attractive tyre with sporting capabilities. with low rolling resistance and high mileage. For middle-class vehicles and executive cars. For compact-class and middle-class vehicles. Technical highlights Technical highlights Exemplary handling in dry conditions. Improved protection against aquaplaning. The closed outer shoulder of the tyre increases the The modern lateral groove system in the tread transverse rigidity and enlarges the area in contact grooves means that water is effectively channelled with the road. This results in exemplary handling in from the contact area in the middle to the large dry conditions and improves the transfer of forces, circumferential grooves. This ensures good protec- especially on corners. tion against aquaplaning. Increased mileage thanks to even wear. Excellent handling on dry roads. Uniformly spaced wide tread ribs distribute the The outer shoulder is made up of closed shoulder pressure evenly over the ground contact area. blocks with a solid circumferential groove. This This keeps wear to a minimum, increasing the increases the rigidity and results in very good mileage. cornering stability on dry roads. The handling per- formance on corners and when driving in a straight Improved handling on wet roads. line is optimised. Inner shoulder blocks with subdepth elements Reduced noise level and improved ensure that water flows away from the ground- driving comfort. contact area effectively, enabling precise handling on wet roads. The uniform width and inclination of the shoulder grooves, in combination with the slightly offset inner and outer shoulders, reduces the road noise due to the optimised frequency overlay. The low noise level improves the driving comfort. 4 5 TransTech II The van tyre Range of dimensions Safe driving with heavy weight. ProTech HP CityTech II Size LI SI XL FR EU label values Size LI SI XL FR EU label values 185/70 R 14 88 H E C 2 70 135/80 R 13 70 T F C 2 70 For transporter and vans. 175/65 R 14 82 H E C 2 70 145/80 R 13 75 T E C 2 70 195/65 R 14 89 H E C 2 71 155/80 R 13 79 T E C 2 70 195/60 R 14 86 H E C 2 71 165/80 R 13 83 T E C 2 70 185/55 R 14 80 H E C 2 70 175/80 R 14 88 T E C 2 70 185/55 R 15 82 V E C 2 70 145/70 R 13 71 T F C 2 70 195/55 R 15 85 V E C 2 71 155/70 R 13 75 T E C 2 70 195/55 R 16 87 V E C 2 71 165/70 R 13 79 T E C 2 70 205/55 R 16 91 V E C 2 71 175/70 R 13 82 T E C 2 70 205/55 R 16 91 W E C 2 71 185/70 R 13 86 T E C 2 70 205/55 R 16 94 V XL E C 2 71 165/70 R 14 81 T E C 2 70 215/55 R 16 97 Y XL E C 2 72 165/70 R 14 85 T XL E C 2 70 225/55 R 16 99 Y XL E C 2 72 175/70 R 14 84 T E C 2 70 205/55 R 17 95 V XL FR E C 2 72 175/70 R 14 88 T XL E C 2 70 Technical highlights 215/55 R 17 94 Y FR E C 2 71 185/70 R 14 88 T E C 2 70 225/55 R 17 101 Y XL FR E C 2 72 195/70 R 14 91 T E C 2 71 255/55 R 18 109 Y XL FR E C 2 73 155/65 R 13 73 T E C 2 70 195/50 R 15 82 V E C 2 71 165/65 R 13 77 T E C 2 70 Improved handling on dry roads. 205/50 R 15 86 V F C 2 71 175/65 R 13 80 T E C 2 70 195/50 R 16 88 V XL E C 2 72 155/65 R 14 75 T E C 2 70 Optimised tread pattern stiffness and increased 205/50 R 16 87 W E C 2 71 165/65 R 14 79 T E C 2 70 stability in the circumferential lugs, plus ideally 205/50 R 17 93 W XL FR E C 2 72 175/65 R 14 82 T E C 2 70 positioned gripping edges improve the handling 215/50 R 17 95 Y XL FR E C 2 72 175/65 R 14 86 T XL E C 2 71 225/50 R 17 98 Y XL FR E C 2 72 185/65 R 14 86 T E C 2 70 characteristics on dry roads. 235/50 R 18 97 V FR E B 2 71 185/65 R 14 86 H E C 2 70 195/45 R 15 78 V FR F C 2 71 165/65 R 15 81 T E C 2 70 195/45 R 16 84 V XL FR E C 2 72 175/65 R 15 84 T E C 2 70 Highly economical due to long 215/45 R 17 91 Y XL FR E C 2 72 185/65 R 15 88 T E C 2 70 service life. 225/45 R 17 94 Y XL FR E C 2 72 185/65 R 15 92 T XL E C 2 70 225/45 R 17 91 Y FR E C 2 72 185/65 R 15 88 H E C 2 70 235/45 R 17 97 Y XL FR E C 2 72 195/65 R 15 91 T E C 2 A flat tyre contour and a low-wear compound 71 245/45 R 17 99 Y XL FR E C 2 72 195/65 R 15 95 T XL E C 2 71 increase the ground contact area and results 235/45 R 18 98 Y XL FR E B 2 72 195/65 R 15 91 V E C 2 71 in even, reduced wear. This extends the service 245/45 R 18 100 Y XL FR E C 2 72 195/65 R 15 91 H E C 2 71 life and increases the economy of the tyre. 205/40 R 17 84 W XL FR E C 2 72 205/65 R 15 94 V E C 2 71 245/40 R 17 91 Y FR E C 2 71 215/65 R 16 98 V FR E C 2 71 225/40 R 18 92 Y XL FR E C 2 72 225/65 R 17 102 H FR E C 2 71 More comfortable ride due to low 235/40 R 18 95 Y XL FR E C 2 72 235/65 R 17 108 V XL FR E C 2 72 245/40 R 18 97 Y XL FR E C 2 72 165/60 R 14 75 T E C 2 70 noise level. 255/40 R 19 100 Y XL FR E C 2 73 185/60 R 14 82 T E C 2 70 TransTech II 255/35 R 18 94 Y XL FR E B 2 73 185/60 R 14 82 H E C 2 70 Staggered shoulder grooves of uniform width 235/35 R 19 91 Y XL FR E C 2 72 185/60 R 15 88 H XL E C 2 71 eliminate frequency peaks and reduce road noise. Size LI SI PR EU label values 255/35 R 19 96 Y XL FR E C 2 73 195/60 R 15 88 H E C 2 71 The low noise level ensures a very comfortable 175/65 R 14 090/088 T E C 2 72 255/35 R 20 97 Y XL FR E C 2 73 195/60 R 15 88 V E C 2 71 165/70 R 14 089/087 R SL E C 2 72 205/60 R 15 91 H E C 2 71 ride. 195 R 14 106/104 Q E C 2 72 205/60 R 15 91 V E C 2 71 185 R 14 102/100 Q E C 2 72 205/60 R 16 92 V E C 2 71 205/65 R 15 102/100 T E C 2 72 215/60 R 16 99 V XL E C 2 72 225/70 R 15 112/110 R E C 2 72 ProTech NewGen (launch of complete range in 2019) 235/60 R 16 100 V FR E C 2 71 215/70 R 15 109/107 R E C 2 72 215/60 R 17 96 H E C 2 71 195/70 R 15 104/102 R E C 2 72 Size LI SI XL FR EU label values 235/60 R 18 107 W XL FR E C 2 72 195/60 R 16 099/097 T E C 2 72 215/70 R 16 100 H 185/55 R 14 80 T E B 2 70 235/65 R 16 115/113 R E C 2 72 205/45 R 17 88 Y XL FR E B 2 225/65 R 16 112/110 R E C 2 72 225/45 R 18 95 Y XL FR E B 2 215/65 R 16 109/107 R E C 2 72 215/40 R 17 87 Y XL FR E B 2 205/65 R 16 107/105 T E C 2 72 245/40 R 19 98 Y XL FR E B 2 195/65 R 16 104/102 T E C 2 72 225/75 R 16 121/120 R 72 215/75 R 16 113/111 R E C 2 72 205/75 R 16 110/108 R E C 2 72 205/75 R 16 110/108 R E C 2 72 195/75 R 16 107/105 R E C 2 72 185/75 R 16 104/102 R E C 2 72 6 7 FourTech The all-season tyre Whether dry summer roads or snow-covered slopes, the FourTech offers high safety for all seasons.
Load more

Recommended publications
  • Performance Analysis of Constant Speed Local Abstacle Avoidance Controller Using a MPC Algorithym on Granular Terrain Nicholas Haraus Marquette University
    Marquette University e-Publications@Marquette Master's Theses (2009 -) Dissertations, Theses, and Professional Projects Performance Analysis of Constant Speed Local Abstacle Avoidance Controller Using a MPC Algorithym on Granular Terrain Nicholas Haraus Marquette University Recommended Citation Haraus, Nicholas, "Performance Analysis of Constant Speed Local Abstacle Avoidance Controller Using a MPC Algorithym on Granular Terrain" (2017). Master's Theses (2009 -). 443. http://epublications.marquette.edu/theses_open/443 PERFORMANCE ANALYSIS OF A CONSTANT SPEED LOCAL OBSTACLE AVOIDANCE CONTROLLER USING A MPC ALGORITHM ON GRANULAR TERRAIN by Nicholas Haraus, B.S.M.E. A Thesis submitted to the Faculty of the Graduate School, Marquette University, in Partial Fulfillment of the Requirements for the Degree of Master of Science Milwaukee, Wisconsin December 2017 ABSTRACT PERFORMANCE ANALYSIS OF A CONSTANT SPEED LOCAL OBSTACLE AVOIDANCE CONTROLLER USING A MPC ALGORITHM ON GRANULAR TERRAIN Nicholas Haraus, B.S.M.E. Marquette University, 2017 A Model Predictive Control (MPC) LIDAR-based constant speed local obstacle avoidance algorithm has been implemented on rigid terrain and granular terrain in Chrono to examine the robustness of this control method. Provided LIDAR data as well as a target location, a vehicle can route itself around obstacles as it encounters them and arrive at an end goal via an optimal route. This research is one important step towards eventual implementation of autonomous vehicles capable of navigating on all terrains. Using Chrono, a multibody physics API, this controller has been tested on a complex multibody physics HMMWV model representing the plant in this study. A penalty-based DEM approach is used to model contacts on both rigid ground and granular terrain.
    [Show full text]
  • Mitas Tires – Designed to Perform in Your Fields
    AGRICULTURAL RADIAL TIRES Mitas Tires – DESIGNED TO PERFORM IN YOUR FIELDS • Product Information • Warranty Policy • Service After the Sale www.mitasag.com A TECHNOLOGY FOR TECHNOLOGY Agricultural technology is evolving rapidly, and today’s high-horsepower tractors and combines demand tires that can keep up with the pace. That’s why Mitas is committed to providing advanced radial tires to ensure your farming operation is expertly outfitted from the ground up. If your tires aren’t up to speed with your machinery, you may experience: • Subpar machine performance • Decreased productivity • Increased operating costs • Suboptimal crop yields • Lost profits EXPERTISE MEANS EVERYTHING Given the high stakes and rewards of your operation, would you rather buy your tires from a manufacturer that dabbles in agriculture or one that focuses all its resources solely on agricultural and off-road tires? At Mitas, agriculture alone accounts for 70 percent of our global business. When you purchase Mitas premium-grade agricultural radial tires, you can be confident they are engineered and manufactured to exacting standards for superior quality, durability and performance. 1 Table of Contents Tire applications .............................................................................3 List of tire sizes ...............................................................................5 SuperFlexionTire (SFT) .................................................................7 Combine drive tires: AC 70 H / G / N and SuperFlexionTire (SFT) ..................................................
    [Show full text]
  • VTI Rapport 971A Published 2021 Vti.Se/Publications
    The effect of water and snow on the road surface on rolling resistance Annelie Carlson Tiago Vieira VTI rapport 971A Published 2021 vti.se/publications VTI rapport 971 A The effect of water and snow on the road surface on rolling resistance Annelie Carlson Tiago Vieira Author: Annelie Carlson, VTI, http://orcid.org/0000-0002-8957-8727 Tiago Vieira, VTI, https://orcid.org/0000-0001-8057-6031 Reg.No.: 2016/0589-9.1 Publication: VTI rapport 971A Published by VTI, 2021 Publikationsuppgifter – Publication Information Titel/Title Effekten på rullmotstånd av vatten och snö på vägytan/The effect of water and snow on the road surface on rolling resistance Författare/Author Annelie Carlson, Linköpings Universitet, http://orcid.org/0000-0002-8957-8727 Tiago Vieira, VTI, https://orcid.org/0000-0001-8057-6031 Utgivare/Publisher VTI, Statens väg- och transportforskningsinstitut/ Swedish National Road and Transport Research Institute (VTI) www.vti.se/ Serie och nr/Publication No. VTI rapport 971A Utgivningsår/Published 2021 VTI:s diarienr/Reg. No., VTI 2016/0589-9.1 ISSN 0347–6030 Projektnamn/Project State-of-the-art om påverkan av vatten och snö på rullmotstånd/State-of-the-art om påverkan av vatten och snö på rullmotstånd Uppdragsgivare/Commissioned by Trafikverket/Swedish Transport Administration Språk/Language Engelska/English Antal sidor inkl. bilagor/No. of pages incl. appendices 43 VTI rapport 971A 3 Sammanfattning Effekten på rullmotstånd av vatten och snö på vägytan av Annelie Carlson (VTI) och Tiago Vieira (VTI) Rullmotstånd uppkommer vid interaktionen mellan vägyta och däck och utgör en del av det färdmotstånd som ett fordon behöver överkomma för att röra sig framåt.
    [Show full text]
  • The Effect of the Tractor Tires Load on the Ground Loading Pressure
    ACTA UNIVERSITATIS AGRICULTURAE ET SILVICULTURAE MENDELIANAE BRUNENSIS Volume 65 165 Number 5, 2017 https://doi.org/10.11118/actaun201765051607 THE EFFECT OF THE TRACTOR TIRES LOAD ON THE GROUND LOADING PRESSURE Lukáš Renčín1, Adam Polcar1, František Bauer1 1 Department of Technology and Automobile Transport, Faculty of AgriSciences, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic Abstract RENČÍN LUKÁŠ, POLCAR ADAM, BAUER FRANTIŠEK. 2017. The Effect of the Tractor Tires Load on the Ground Loading Pressure. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 65(5): 1607 – 1614. The contribution, based on the experimental measurement, analyses the issue of a specific pad loading pressure in relation to radial wheel load and tire inflation. Tile inflation in terms of allowed radial load, which we wish to be high as far as possible in terms of the power transmission from the wheels to the ground is important for the field tensile works, on the other hand, the pressure in the tire is closely related to the contact area and ground loading pressure. The obtained results show the following: Michelin Multibib 650/65 R38 tire, inflated to a pressure of 80 kPa has a sufficient reserve in radial load. As the measurement results show, ground loading pressure at the highest load of 36.55 kN, which was used during the measurement, is under the value of 100 kPa, which would mean on loamy soil at a humidity of 17 % that the limit of the ground pressure on the ground has not been exceeded. Keywords: stress transmission, tire inflation pressure, area of imprint, pressure in area of imprint layer.
    [Show full text]
  • Chapter 1. Tuning of Iveco Stralis Multibody Model in Adams/Car 14
    POLITECNICO DI TORINO MECHANICAL AND AEROSPACE ENGINEERING DEPARTMENT Master’s Degree Course in Automotive Engineering Master’s Degree Thesis EXPERIMENTAL-NUMERICAL COMFORT ANALYSIS OF A HEAVY-DUTY VEHICLE Academic supervisors: Prof. Mauro VELARDOCCHIA Prof. Enrico GALVAGNO Company supervisor: Dott. Vladi Massimo NOSENZO Student: Michele GALFRE’ ACADEMIC YEAR 2018–2019 Index INDEX ............................................................................................................................................. 2 ABSTRACT .................................................................................................................................... 4 PICTURE INDEX .......................................................................................................................... 5 TABLE INDEX ............................................................................................................................. 10 INTRODUCTION ........................................................................................................................ 11 THE COMPANY ..................................................................................................................... 12 IVECO STRALIS ..................................................................................................................... 12 CHAPTER 1. TUNING OF IVECO STRALIS MULTIBODY MODEL IN ADAMS/CAR 14 1.1 POSITIONING ................................................................................................................... 15 1.2
    [Show full text]
  • How to Optimize Your Tyre Pressures and Temperatures on Your Caravan
    How to Optimize your Tyre Pressures and Temperatures on your Caravan/Camperinsert image here: and your150 x 80mm vehicle www.kimberleygroup.com.au 20121126 2 Importance of Optimum Tyre Pressure and Temperature Table of Contents 1. Why is tyre pressure and temperature so crucial? 2. What is the link between Tyre Pressure and Temperature? 3. Getting the starting pressure right 4. Adjusting the pressure with the 4PSI rule 5. Adjusting the pressure to the optimum 6. TPMS 7. Suggested Pressure and Speed for conditions 8. Conversion Table 9. Is there an Optimum Tyre Size? 10. Acceleration, Braking and Load Transfer 11. Specifications of TPMS 12. TPMS Kit from Kimberley 13. Tyre Markings/ Tyre Size 14. Tyre Ageing kimberleygroup.com 3 Importance of Optimum Tyre Pressure and Temperature This eBook addresses the question: How much of Australia do you want to experience? kimberleygroup.com 4 Importance of Optimum Tyre Pressure and Temperature Why is Tyre Pressure so crucial? Your tyre’s inflation pressure is measured as pounds per square inch, (psi) or “Bar (metric). The maximum recommended psi for your tyres printed right on them. However, manufacturers may print a lower recommended psi than your tyre can truly handle because the lower inflation rate will give you a softer ride. If you over inflate your tyres, you might cause some safety hazards. You’ll definitely wear out the tyres more quickly. A tyre that is over inflated shows more wear along the center width of the tyre than along its edges. When your tyres develop uneven tread wear, it shortens the overall life expectancy of your tyre.
    [Show full text]
  • Tire & Track Pressures
    December 2014 THE LEADER IN NO-TILL SEEDING TECHNOLOGY Tire & Track Pressures: Goal-setting by Matt Hagny, consulting agronomist for no-till systems since ‘94. Thinking about upgrading tractors, combines, sprayers? The features and capacity are what everyone dreams of and drools over. The tires (or tracks) to carry that newer equipment are always an afterthought. Gee, the price to upgrade that piece of equipment is soooo much that we ran out of money in our budget and we’ll just get by with whatever tires are standard—which are always too small (just enough to roll the machine out the OEM’s door L). With upgrades, the machine weight always seems to creep up, up, up—and which now are truly of monstrous proportions. You really ought to be thinking about how the extra machine weight should be carried before you seriously contemplate an upgrade. And don’t think, “Well, it’s almost as good as my current setup,” because nearly everything I see in the field is causing major soil problems—especially in the low-OM and more highly weathered soils (more ancient geologically) that are found in the Winter wheat failed to make a stand and survive southern USA (let’s use the rough guideline of Interstate 80 again to define the winter in tractor & air cart tracks from ‘southern’), or any other soils that are degraded. seeding the previous soybean crop. The transport wheels on the wings of the drill are also visible. And the track angling across is a sprayer track. But first: How serious is this compaction anyway? You probably get a lot Sprayer had correct inflation of 22 psi (lowest of different views.
    [Show full text]
  • Airframes and Systems
    Airframes and Systems I. Fuselage II. Cockpit and Cabin Window III. Wing IV. Stabilizing surfaces V. Landing gear VI. Flight controls (construction and operation) VII. Hydraulics VIII. Air Driven System (Piston Engine) IX. Air Driven System (Turbo propeller And Jet Aircraft) X. Non-pneumatic operated de-ice and anti-ice systems XI. Fuel System Fuselage: 1.What are the most frequent used materials in a monocoque or semi-monocoque structure? A) Wood. B) Composite fibres. C) Aluminium or magnesium alloy. D) Steel. A framework of truss type fuselage is used in: A) Supersonic aircraft B) Medium range commuter type turbo-props C) Heavy wide bodied subsonic turbo-fan aircraft D) Light training aircraft mainly A semi-monocoque fuselage has... in the longitudinal direction. Together with the frames, they resist... moments and axial forces. The skin panels are loaded mainly in... A) Bars, buckling, bending. B) Stringers, bending, shear. C) Spars, torsion, shear. D) Stringers, bending, buckling. Aircraft structures consists mainly of: A) Magnesium alloy sheets with aluminium rivets and titanium or steel at points requiring high strength. B) Light alloy steel sheets with copper rivets and titanium or steel materials at points requiring high strength. C) Aluminium alloy sheets and rivets with titanium or steel materials at points requiring high strength. D) Aluminium sheets and rivets with titanium or steel materials at points requiring high strength. What is the purpose of the stringers? A) To absorb the torsional and compressive stresses. B) To support the primary control surfaces. C) To produce stress risers. D) To prevent buckling and bending by supporting and stiffening the skin.
    [Show full text]
  • Design Method Development for the Design of Traction Systems Avinash Kolla Clemson University, [email protected]
    Clemson University TigerPrints All Theses Theses 8-2010 Design Method Development for the Design of Traction Systems Avinash Kolla Clemson University, [email protected] Follow this and additional works at: https://tigerprints.clemson.edu/all_theses Part of the Engineering Mechanics Commons Recommended Citation Kolla, Avinash, "Design Method Development for the Design of Traction Systems" (2010). All Theses. 929. https://tigerprints.clemson.edu/all_theses/929 This Thesis is brought to you for free and open access by the Theses at TigerPrints. It has been accepted for inclusion in All Theses by an authorized administrator of TigerPrints. For more information, please contact [email protected]. DESIGN METHOD DEVELOPMENT FOR THE DESIGN OF TRACTION SYSTEMS A Thesis Presented to the Graduate School of Clemson University In Partial Fulfillment of the Requirements for the Degree Master of Science Mechanical Engineering by Avinash Kolla August 2010 Accepted by: Dr. Joshua D. Summers, Committee Chair Dr. Sherrill Biggers Dr. Paul Joseph ABSTRACT The objective of this research is to develop a design method for rapid exploration of traction concepts primarily for off-road vehicles. Different approaches available to achieve this objective are discussed and compared, such as computational, analytical, and physical methods. Computational approaches are based on simulations performed using Finite Element Method (FEM), Discrete Element Method (DEM), and combined Finite Element-Discrete Element (FE-DE) methods. Analytical approaches are based on closed form mathematical models developed by previous researchers based on the theory of plasticity. Physical approaches include fabrication and testing of prototypes at different levels of abstraction. This thesis compares these different approaches to design with respect to design process requirements of (1) timeliness, (2) cost, (3) required expertise, (4) accuracy of results, (5) flexibility to adapt to new designs and (6) stage of design process.
    [Show full text]
  • Michelin® Agriculture and Compact Equipment Tires Technical Data Book | 2019
    MICHELIN® AGRICULTURE AND COMPACT EQUIPMENT TIRES TECHNICAL DATA BOOK | 2019 Business.Michelinman.com Tweel.Michelinman.com Michelin Agriculture Contents TRACTOR TIRES 2-55 SPRAYER & ROW CROP TIRES 76-81 AGRIBIB® 2SPRAYBIB™ 76 AGRIBIB® 2 12 AGRIBIB® ROW CROP 79 YIELDBIB™ 17 MACHXBIB® 21 AXIOBIB® 26 AXIOBIB® 2 31 MULTIBIB™ 36 OMNIBIB™ 43 XEOBIB® 48 ROADBIB® 52 TRAILERS & IMPLEMENTS 82-93 EVOBIB® 54 CARGOXBIB® HIGH FLOTATION 82 CARGOXBIB® HEAVY DUTY 86 CARGOXBIB® 87 XP27™ 90 XS™ 92 HARVESTER & FLOATER TIRES 56-74 CEREXBIB™ 2 56 CEREXBIB™ 61 FLOATXBIB 66 MEGAXBIB® 2 68 MEGAXBIB® 71 TIRE TECHNICAL DATA BOOK | 2019 COMPACT EQUIPMENT TIRES 94-132 OPERATIONAL INFORMATION 133-153 XMCL™ 99 SIZE EQUIVALENCY CHART 134 XM27™ 104 ROLLING CIRCUMFERENCE INDEX CHART 135 BIBLOAD® HARD SURFACE 105 TIRE SIDEWALL MARKINGS 138 CROSSGRIP® 109 LOAD INDICES AND SPEED RATINGS 139 XF™ 112 OPERATING INSTRUCTIONS 140 XM47™ 114 CALCULATION OF MECHANICAL LEAD (4WD) 141 POWER CL™ 116 LOAD-BALANCING CALCULATION 142 POWER DIGGER 121 RIM AND O-RING REFERENCES 144 BIBSTEEL™ ALL TERRAIN 123 VALVE CHARACTERISTICS 145 BIBSTEEL™ HARD SURFACE 125 MICHELIN® TUBES 147 X® TWEEL® SSL 2 127 MOUNTING / DISMOUNTING 149 X® TWEEL® TURF 129 X® TWEEL® TURF CASTER 130 X® TWEEL® UTV 131 X® TWEEL® TURF – GOLF CART 132 TIRE TECHNICAL DATA BOOK | 2019 Reading the technical data Charts Specifi c markings for high technology tires • IF: Increased Flexion (Tires designed to carry 20% more load at the same pressure or 20% less pressure for the same load compared to standard radials in the same size) • VF: Very High Flexion (Tires designed to carry 40% more load at the same pressure or 40% less pressure for the same load compared to standard radials in the same size) • CFO & CFO+: Improved Flexion Cyclic Field Operation (Cyclic Field Operating parameters for IF and VF designated tires) Rim Local country diameter (TL) & international in inches Tubeless product code Rim Size (inch) Description MSPN (CAI) 38 IF 710/85 R38 178D TL 99013 (992951) Section Overall Loaded Rolling Recommended Acceptable Min.
    [Show full text]
  • Conference Program & Abstract
    40th Annual Business Meeting and Conference on Tire Science and Technology The Virtual Tire Program and Abstracts August 30th – September 3rd, 2021 Thank you to our sponsors! Gold V-Rated Sponsor Gold V-Rated Sponsor Silver H-Rated Sponsor Silver H-Rated Sponsor Bronze T-Rated Sponsor Media Partners Schedule at a Glance Time Monday Tuesday Wednesday Thursday Friday August 30 August 31 September 1 September 2 September 3 8:00 AM 8:05 AM 8:10 AM Conference Opening 8:15 AM 8:20 AM Business Meeting 8:25 AM Techical Session #3 8:30 AM 8:35 AM Keynote Address Student Papers #2 Techical Session #6 Techical Session #8 8:40 AM 8:45 AM Mike Anderson 8:50 AM Distinguished Tire-Road Interaction Tire & Vehicle System 8:55 AM General Motors 9:00 AM Achievement Award 9:05 AM 9:10 AM Break 9:15 AM 9:20 AM 9:25 AM Break Break 9:30 AM 9:35 AM Plenary Lecture Break Break 9:40 AM Panel Discussion 9:45 AM Christian Oertel 9:50 AM Plenary Lecture Techical Session #8 9:55 AM Bradenburg University "Virtual Tire Submissions: 10:00 AM Techical Session #1 10:05 AM Challenges from the Mike Stackpole Tire & Vehicle System 10:10 AM 10:15 AM Emerging Technologies Stackpole Engineering (continued) 10:20 AM Break Automotive Industry" 10:25 AM Services 10:30 AM 10:35 AM 10:40 AM Break Break 10:45 AM 10:50 AM Break 10:55 AM Break 11:00 AM 11:05 AM Panel Discussion 11:10 AM 11:15 AM Techical Session #4 "The Next Chapter in Tire 11:20 AM 11:25 AM Virtual Design Techical Session #7 Model Technology" 11:30 AM Techical Session #2 Techical Session #5 11:35 AM 11:40 AM Predictive
    [Show full text]
  • Measurement and Analysis of Truck Tire Pressures in Oregon
    100 TRANSPORTATION RESEARCH RECORD 1207 Measurement and Analysis of Truck Tire Pressures in Oregon OK-KEE KIM AND CHRIS A. BELL As axle loads have increased, the use of higher tire pressures gon's trucks, particularly levels of tire pressures and tire sizes, has become more popular in the truck market. To collect data and analyzes the survey data. on tire pressures and types of tires in use, a survey was carried out at a weigh station located near Woodburn, Oregon, on Interstate 5 during the summer of 1986. The data show that BACKGROUND 87 percent of the tires surveyed are of radial construction. The average measured pressures of radial and bias tires are 102 Economic incentives that often exceed the expected costs of psi and 82 psi, respectively. The survey results show that the overweighting to the trucker are a major reason for increasing difference between the manufacturer's maximum recom­ mended tire pressure and the measured tire pressure is very the cargo weight of trucks. The benefit to a trucker from small, particularly for radial tires. Therefore, if government increasing the load capacity of a truck is increased financial agencies wish to control tire pressures, it would be expedient returns. to control the manufacturer's maximum recommended pres­ Table 1 indicates that the cash incentive to load 80,000 lb sure rather than the inflation pressure used by truckers. This rather than 73,000 lb is $180, and the incentive increases as would ensure reasonable control, since the data collected in cargo weight increases ( 4). This results from decreasing costs this study show that measured and recommended tire pressures per ton-mile as cargo weight increases.
    [Show full text]