DOCSLIB.ORG

ISO Update Supplement to Isofocus

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
ISO Update Supplement to Isofocus ISO Update Supplement to ISOfocus August 2020 International Standards in process ISO/CD 24649 Manually and Hydraulically operated plastic valves An International Standard is the result of an agreement between ISO/CD Standardization of injection sites for differ- the member bodies of ISO. A first important step towards an Interna- 15639-2 ent animal species — Part 2: Equine (horses, tional Standard takes the form of a committee draft (CD) - this is cir- donkeys, and zebras) culated for study within an ISO technical committee. When consensus TC 27 Coal and coke has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International ISO/CD 1014 Coke — Determination of true relative density, Standard (DIS). The DIS requires approval by at least 75 % of the apparent relative density and porosity member bodies casting a vote. A confirmation vote is subsequently TC 29 Small tools carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. ISO/CD 603-14 Bonded abrasive products — Dimensions — Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder ISO/CD 603-15 Bonded abrasive products — Dimensions — Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines ISO/CD 603-16 Bonded abrasive products — Dimensions — Part 16: Grinding wheels for cutting-off on hand held power tools CD registered TC 34 Food products ISO/CD 24223 Cheese — Guidance on sample preparation for physical and chemical testing Period from 01 July to 01 August 2020 TC 35 Paints and varnishes These documents are currently under consideration in the technical committee. ISO/CD 17463 Paints and varnishes — Guidelines for the determination of anticorrosive properties of They have been registred at the Central Secretariat. organic coatings by accelerated cyclic electro- chemical technique TC 4 Rolling bearings ISO/CD Paints and varnishes — Wettability — Part 1: 19403-1 Terminology and general principles ISO/CD 199 Rolling bearings — Thrust bearings — Geo- metrical product specification (GPS) and toler- TC 37 Language and terminology ance values ISO/CD Management of terminology resources — Data TC 5 Ferrous metal pipes and metallic 12620-2 categories — Part 2: Repositories fittings ISO/CD 24019 Simultaneous interpreting delivery platforms — ISO/CD 4370 Environmental life cycle analysis and recycling Requirements and recommendations TC 20 Aircraft and space vehicles TC 39 Machine tools ISO/CD 4579 Aerospace — Drives, internal, TORX PAR- ISO/CD Test code for machine tools — Part 4: Circular ALOBE drive — Geometrical definition, gaging 230-4.2 tests for numerically controlled machine tools and technical requirements ISO/CD Test code for machine tools — Part 10: ISO/CD 4580 Aerospace — Drives, internal, TORX PAR- 230-10.3 Determination of the measuring performance ALOBE driver bit — Geometrical definition, of probing systems of numerically controlled gaging and technical requirements machine tools TC 21 Equipment for fire protection and fire ISO/CD 230-12 Test code for machine tools — Part 12: Ac- fighting curacy of finished test pieces ISO/CD TR Fire detection and alarm systems — Part 9: TC 45 Rubber and rubber products 7240-9 Test fires for fire detectors ISO/CD 24329 Low-protein natural rubber concentrate TC 22 Road vehicles — Specification ISO/CD 7141 Road vehicles — Light alloy wheels — Impact ISO/CD 23711 Elastomeric seals — Requirements for materi- test als for pipe joint seals used in water and drain- age applications — Thermoplastic elastomers ISO/CD 6627 Internal combustion engines — Piston rings — Expander/segment oil-control rings TC 46 Information and documentation ISO/CD TR Road vehicles — Prospective safety perfor- ISO/CD 13008 Information and documentation — Digital 21934-1 mance assessment of pre-crash technology records conversion and migration process by virtual simulation — Part 1: State-of-the-art ISO/PRF TS Information and documentation - Processes and general method overview 16175-2 and functional requirements for software for ISO/CD TS Road vehicles — Calibration procedure for managing records — Part 2: Guidance for se- 23521 displacement devices lecting, designing, implementing and maintain- ing software for managing records ISO/CD 6460-1 Motorcycles — Measurement method for gase- ous exhaust emissions and fuel consumption TC 54 Essential oils — Part 1: General test requirements ISO/CD 5093 Essential oil of lemon myrtle (Backhousia citrio- TC 23 Tractors and machinery for agriculture dora F.Muell.), citral type and forestry TC 59 Buildings and civil engineering works ISO Update, Supplement to ISO Focus -- August 2020 1 ISO/CD Organization and digitization of information ISO/CD Water quality — Sampling — Part 26: Guidance 19650-4 about buildings and civil engineering works, 5667-26 on sampling for the parameters of the oceanic including building information modelling (BIM) carbon dioxide system — Information management using building TC 150 Implants for surgery information modelling — Part 4: Information exchange ISO/CD 5832-6 Implants for surgery — Metallic materials — Part 6: Wrought cobalt-nickel-chromium- ISO/CD Houses — Description of performance — Part molybdenum alloy 15928-6.2 6: Contribution to sustainable development TC 156 Corrosion of metals and alloys TC 60 Gears ISO/CD 23669 Corrosion of metals and alloys — Guidelines ISO/CD TS Calculation of load capacity of bevel gears — for localised corrosion and environmentally as- 10300-20 Part 20: Calculation of scuffing load capacity; sisted cracking testing of additively manufac- Flash temperature method tured metals and alloys TC 70 Internal combustion engines TC 159 Ergonomics ISO/CD 6798-3 Reciprocating internal combustion engines ISO/CD TS Ergonomics of human-system interaction — — Measurement of sound power level using 9241-430 Part 430: Recommendations for the design of sound pressure — Part 3: Survey method for non-touch gestural input for the reduction of use in situ biomechanical stress TC 76 Transfusion, infusion and injection, and TC 163 Thermal performance and energy use blood processing equipment for medi- in the built environment cal and pharmaceutical use ISO/CD 23766 Thermal insulating products for industrial ISO/CD Infusion equipment for medical use — Part 15: installations — Determination of the coefficient 8536-15 Light-resistant infusion sets for single use of linear thermal expansion at sub-ambient TC 96 Cranes temperatures ISO/CD 12210 Cranes — Anchoring devices for in-service and TC 164 Mechanical testing of metals out-of-service conditions ISO/CD Metallic materials — Instrumented indentation TC 107 Metallic and other inorganic coatings 14577-6 test for hardness and materials parameters — Part 6: Part 6: Evaluation of stress change ISO/CD 1461 Hot dip galvanized coatings on fabricated iron using indentation force differences and steel articles — Specifications and test methods TC 172 Optics and photonics TC 108 Mechanical vibration, shock and condi- ISO/CD 12005 Lasers and laser-related equipment — tion monitoring Test methods for laser beam parameters — Polarization ISO/CD Mechanical vibration — Measurement and 20816-3 evaluation of machine vibration — Part 3: Cou- ISO/CD 13696 Optics and photonics — Test method for total pled industrial machines scattering by optical components ISO/CD Mechanical vibration — Rotor balancing — TC 181 Safety of toys 21940-21 Part 21: Description and evaluation of balanc- ISO/CD 8124-1 Safety of toys — Part 1: Safety aspects related ing machines to mechanical and physical properties ISO/CD Mechanical vibration — Torsional vibration TC 199 Safety of machinery 22266-1 of rotating machinery — Part 1: Evaluation of steam and gas turbine generator sets due to ISO/CD TR Safety of machinery — Relationship with ISO electrical excitation 22100-5 12100 — Part 5: Implications of embedded Artificial Intelligence-machine learning TC 122 Packaging TC 206 Fine ceramics ISO/CD 24259 Steel Strapping for Packaging ISO/CD 20507 Fine ceramics (advanced ceramics, advanced TC 123 Plain bearings technical ceramics) — Vocabulary ISO/CD 4821 Plain bearings — Dynamic adhesion test ISO/CD 23739 Fine ceramics (advanced ceramics, advanced method for DLC coated parts under lubricated technical ceramics) — Methods for chemical condition analysis of zirconium oxide powders TC 130 Graphic technology TC 215 Health informatics ISO/CD TS Image quality evaluation methods for printed ISO/CD TS Health informatics — Token-based health 18621-11 matter — Part 11: Colour gamut analysis 22691 information sharing TC 131 Fluid power systems TC 219 Floor coverings ISO/CD 8132 Hydraulic fluid power — Mounting dimensions ISO/CD 24338 Laminate floor coverings — Determination of for accessories for single rod cylinders, 16 MPa abrasion resistance (160 bar) medium and 25 MPa (250 bar) series TC 229 Nanotechnologies ISO/CD 8133 Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa ISO/CD TS Label-free impedance technology to assess the (160 bar) compact series 21633 toxicity of nanomaterials in Vitro ISO/CD TR Hydraulic fluid power – Interpolation method ISO/CD TR High throughput screening method for nano- 4808 for particle count and filter test data 22455 particles toxicity using 3D cells ISO/CD Hydraulic fluid power — Determination of the ISO/CD TS Nanotechnologies — Guidance on measurands 15086-3 fluid-borne noise characteristics of compo- 23302 for characterising nano-objects and materials
Load more

Recommended publications
  • Final Rule: Investment Company Reporting Modernization
    SECURITIES AND EXCHANGE COMMISSION 17 CFR Parts 200, 210, 232, 239, 240, 249, 270, 274 [Release Nos. 33-10231; 34-79095; IC-32314; File No. S7-08-15] RIN 3235-AL42 INVESTMENT COMPANY REPORTING MODERNIZATION AGENCY: Securities and Exchange Commission. ACTION: Final rule. SUMMARY: The Securities and Exchange Commission is adopting new rules and forms as well as amendments to its rules and forms to modernize the reporting and disclosure of information by registered investment companies. The Commission is adopting new Form N-PORT, which will require certain registered investment companies to report information about their monthly portfolio holdings to the Commission in a structured data format. In addition, the Commission is adopting amendments to Regulation S-X, which will require standardized, enhanced disclosure about derivatives in investment company financial statements, as well as other amendments. The Commission is adopting new Form N-CEN, which will require registered investment companies, other than face-amount certificate companies, to annually report certain census-type information to the Commission in a structured data format. The Commission is adopting amendments to Forms N-1A, N-3, and N-CSR to require certain disclosures regarding securities lending activities. Finally, the Commission is rescinding current Forms N-Q and N-SAR and amending certain other rules and forms. Collectively, these amendments will, among other things, improve the information that the Commission receives from investment companies and assist the Commission, in its role as primary regulator of investment companies, to better fulfill its mission of protecting investors, maintaining fair, orderly and efficient markets, and facilitating capital formation.
    [Show full text]
  • FIRDS Reference Data Reporting Instructions
    Reporting Instructions FIRDS Reference Data System 17 September 2020 | ESMA 65-11-1193 Date: 17 September 2020 ESMA 65-11-1193 Document control: Version Date Author Comments 1.0 26/10/2016 ESMA Version 1 for publication 1.1 12/06/2017 ESMA Version 1.1 for publication 2.0 31/10/2018 ESMA Changes applicable to the major maintenance release planned Q1 2019 – XML Schema 1.1.0 Corrections and clarifications 2.1 02/09/2019 ESMA Removal of SI’s and APA’s requirement to report Non-Working days New CFI based validations 02082019 2.2 25/08/2020 ESMA Cancellation of records New CFI based validations 02/03/2020 2.3 17/09/2020 ESMA Cancellation of records - Updated Reference documents: Ref Title Version Author Date 1 MiFIR - REGULATION (EU) No 600/2014 European 15 May 2014 600/2014 OF THE Parliament EUROPEAN PARLIAMENT Council of AND OF THE COUNCIL of 15 Europe May 2014 (Article 27) 2 MAR - REGULATION (EU) No 596/2014 European 16 April 2014 596/2014 OF THE Parliament EUROPEAN PARLIAMENT Council of Europe AND OF THE COUNCIL of 16 April 2014 (Article 4) 3 MiFIR RTS – REGULATION 600/2014 European 14 July 2016 (EU) No 600/2014 OF THE Parliament EUROPEAN PARLIAMENT Council of Europe AND OF THE COUNCIL of 14 July 2016 ESMA • CS 60747 – 201 - 203 rue de Bercy • 75012 • Paris France • Tel. +33 (0) 1 58 36 43 21 • www.esma.europa.eu 2 Date: 17 September 2020 ESMA 65-11-1193 4 MAR RTS – COMMISSION 909/2016 European 1 March 2016 DELEGATED REGULATION (EU) Parliament 2016/909 of 1 March 2016 Council of supplementing Regulation (EU) Europe No 596/2014 of the European Parliament and of the Council with regard to regulatory technical standards for the content of notifications to be submitted to competent authorities and the compilation, publication and maintenance of the list of notifications ESMA • CS 60747 – 201 - 203 rue de Bercy • 75012 • Paris France • Tel.
    [Show full text]
  • 2018-07-11 and for Information to the Iso Member Bodies and to the Tmb Members
    Sergio Mujica Secretary-General TO THE CHAIRS AND SECRETARIES OF ISO COMMITTEES 2018-07-11 AND FOR INFORMATION TO THE ISO MEMBER BODIES AND TO THE TMB MEMBERS ISO/IEC/ITU coordination – New work items Dear Sir or Madam, Please find attached the lists of IEC, ITU and ISO new work items issued in June 2018. If you wish more information about IEC technical committees and subcommittees, please access: http://www.iec.ch/. Click on the last option to the right: Advanced Search and then click on: Documents / Projects / Work Programme. In case of need, a copy of an actual IEC new work item may be obtained by contacting [email protected]. Please note for your information that in the annexed table from IEC the "document reference" 22F/188/NP means a new work item from IEC Committee 22, Subcommittee F. If you wish to look at the ISO new work items, please access: http://isotc.iso.org/pp/. On the ISO Project Portal you can find all information about the ISO projects, by committee, document number or project ID, or choose the option "Stages search" and select "Search" to obtain the annexed list of ISO new work items. Yours sincerely, Sergio Mujica Secretary-General Enclosures ISO New work items 1 of 8 2018-07-11 Alert Detailed alert Timeframe Reference Document title Developing committee VA Registration dCurrent stage Stage date Guidance for multiple organizations implementing a common Warning Warning – NP decision SDT 36 ISO/NP 50009 (ISO50001) EnMS ISO/TC 301 - - 10.60 2018-06-10 Warning Warning – NP decision SDT 36 ISO/NP 31050 Guidance for managing
    [Show full text]
  • ACDD Message Implementation Guide and Process Specifications Final Report
    ACDD Message Implementation Guide and Process Specifications Final Report Version No. 1.08 20 March 2018 March 2018 This publication was produced by Nathan Associates Inc. for review by the United States Agency for International Development. ACDD Message Implementation Guide and Process Specifications Final Report Version No. 1.08 DISCLAIMER This document is made possible by the support of the American people through the United States Agency for International Development (USAID). Its contents are the sole responsibility of the author or authors and do not necessarily reflect the views of USAID or the United States government. Page 3 of 97 ACDD Message Implementation Guide and Process Specifications Table of Contents Acronyms and Definitions ....................................................................................................... 6 1 Introduction ...................................................................................................................... 8 2 Terms of Reference ......................................................................................................... 9 2.1 Background .............................................................................................................. 9 2.2 Binding Agreements on the exchange of ACDD ...................................................... 9 2.3 Member States’ Analysis of the Consolidated ACDD (minimal data elements) ........ 9 2.4 Objective ................................................................................................................
    [Show full text]
  • THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered As a Newspaper at the G.P.O.)
    ~ I v , THE KENYA GAZETTE Published by Authority of the Republic of Kenya (Registered as a Newspaper at the G.P.O.) Vol. CXX—No. 99 NAIROBI, 17th August, 2018 Price Sh. 60 CONTENTS GAZETTE NOTICES GAZETTE NOTICE5—(Contd.) PAGE PAGE The Human Resource Management Professionals Act- I The Insolvency Act-Winding up Order and Creditors' Appointment....................................................................... 2906 2954-2955 The National Council for Law Reporting Act- The Political Parties Act-Change of Party Officials........... 2955 Appointment....................................................................... 2906 County Government Notices ................................................... 2906-2907,2953 The Physical Planning Act-Completion of Pail Development Plans, etc .................................................... 2955-2956 The Land Registration Act-issue of Provisional Certificates, etc ................................................................... 2907-2915 Disposal of Uncollected Goods .............................................. 2956 The National Treasury-Statement of Actual Revenues and Lossof Policies .......................................... ................................ 2956-2962 Net Exchequer Issues as at 31st July, 2018 ...................... 2915-2918 Change of Names ............................................................ The Civil Aviation Act-Decisions of the Kenya Civil 2962-2963 Aviation Authority on Applications for Air Service Licences ............................................................................
    [Show full text]
  • Evitalia NORMAS ISO En El Marco De La Complejidad
    No. 7 Revitalia NORMAS ISO en el marco de la complejidad ESTEQUIOMETRIA de las relaciones humanas FRACTALIDAD en los sistemas biológicos Dirección postal Calle 82 # 102 - 79 Bogotá - Colombia Revista Revitalia Publicación trimestral Contacto [email protected] Web http://revitalia.biogestion.com.co Volumen 2 / Número 7 / Noviembre-Enero de 2021 ISSN: 2711-4635 Editor líder: Juan Pablo Ramírez Galvis. Consultor en Biogestión, NBIC y Gerencia Ambiental/de la Calidad. Globuss Biogestión [email protected] ORCID: 0000-0002-1947-5589 Par evaluador: Jhon Eyber Pazos Alonso Experto en nanotecnología, biosensores y caracterización por AFM. Universidad Central / Clúster NBIC [email protected] ORCID: 0000-0002-5608-1597 Contenido en este número Editorial p. 3 Estequiometría de las relaciones humanas pp. 5-13 Catálogo de las normas ISO en el marco de la complejidad pp. 15-28 Fractalidad en los sistemas biológicos pp. 30-37 Licencia Creative Commons CC BY-NC-ND 4.0 2 Editorial: “En armonía con lo ancestral” Juan Pablo Ramírez Galvis. Consultor en Biogestión, NBIC y Gerencia Ambiental/de la Calidad. [email protected] ORCID: 0000-0002-1947-5589 La dicotomía entre ciencia y religión proviene de la edad media, en la cual, los aspectos espirituales no podían explicarse desde el método científico, y a su vez, la matematización mecánica del universo era el único argumento que convencía a los investigadores. Sin embargo, más atrás en la línea del tiempo, los egipcios, sumerios, chinos, etc., unificaban las teorías metafísicas con las ciencias básicas para dar cuenta de los fenómenos en todas las escalas desde lo micro hasta lo macro.
    [Show full text]
  • EUROPEAN COMMISSION Brussels, 17.9.2019 C(2019)
    EUROPEAN COMMISSION Brussels, 17.9.2019 C(2019) 6537 final ANNEX 1 ANNEX Accompanying the document Commission Implementing Regulation on technical specifications for electronic ship reporting in inland navigation and repealing Regulation (EU) No 164/2010 EN EN Table of Contents 1. PART I: MESSAGE IMPLEMENTATION MANUAL CONVENTION ............................ 2 1.1 Introduction .................................................................................................................... 2 1.2. UN/EDIFACT message structure .................................................................................. 2 1.3. Introduction to message types ....................................................................................... 3 1.3.1. ERINOT ..................................................................................................................... 3 1.3.2. PAXLST ..................................................................................................................... 3 1.3.3. ERIRSP ...................................................................................................................... 3 1.3.4. BERMAN ................................................................................................................... 4 2. PART II: CODES AND REFERENCES ............................................................................... 4 2.1. Introduction ................................................................................................................... 4 2.2. Definitions ....................................................................................................................
    [Show full text]
  • Guidelines on Cryptographic Algorithms Usage and Key Management
    EPC342-08 Version 7.0 4 November 2017 [X] Public – [ ] Internal Use – [ ] Confidential – [ ] Strictest Confidence Distribution: Publicly available GUIDELINES ON CRYPTOGRAPHIC ALGORITHMS USAGE AND KEY MANAGEMENT Abstract This document defines guidelines on cryptographic algorithms usage and key management. Document Reference EPC342-08 Issue Version 7.0 Date of Issue 22 November 2017 Reason for Issue Maintenance of document Produced by EPC Authorised by EPC Document History This document was first produced by ECBS as TR 406, with its latest ECBS version published in September 2005. The document has been handed over to the EPC which is responsible for its yearly maintenance. DISCLAIMER: Whilst the European Payments Council (EPC) has used its best endeavours to make sure that all the information, data, documentation (including references) and other material in the present document are accurate and complete, it does not accept liability for any errors or omissions. EPC will not be liable for any claims or losses of any nature arising directly or indirectly from use of the information, data, documentation or other material in the present document. Conseil Européen des Paiements AISBL– Cours Saint-Michel 30A – B 1040 Brussels Tel: +32 2 733 35 33 – Fax: +32 2 736 49 88 Enterprise N° 0873.268.927 – www.epc-cep.eu – [email protected] © 2016 Copyright European Payments Council (EPC) AISBL: Reproduction for non-commercial purposes is authorised, with acknowledgement of the source Table of Content MANAGEMENT SUMMARY ............................................................. 5 1 INTRODUCTION .................................................................... 7 1.1 Scope of the document ...................................................... 7 1.2 Document structure .......................................................... 7 1.3 Recommendations ............................................................ 8 1.4 Implementation best practices .........................................
    [Show full text]
  • Introducing the IBM Z15 - the Enterprise Platform for Mission-Critical Hybrid Multicloud
    IBM United States Hardware Announcement 119-027, dated September 12, 2019 Introducing the IBM z15 - The enterprise platform for mission-critical hybrid multicloud Table of contents 2 Overview 26 Product number 3 Key requirements 57 Publications 3 Planned availability date 60 Technical information 4 Description 72 Terms and conditions 22 Product positioning 74 Prices 24 Statement of general direction 117Order now 118Corrections At a glance Announcing the IBM(R) z15 Today's announcement extends the IBM Z(R) position as the industry-leading platform for mission-critical hybrid cloud, with new innovations across security, data privacy, and resilience. Data privacy and security Pervasive encryption easily encrypts all data associated with an application, database, or cloud service -- whether on premises or in the cloud, at rest or in flight. The IBM z15 extends this beyond the border of the IBM Z environment. • The new IBM Z Data Privacy Passports, in conjunction with IBM z15 and available via an IBM z15 only PID, is being designed to enforce security and privacy protections to data not only on Z, but across platforms. It provides a data-centric security solution that enables data to play an active role in its own protection. For more information about IBM Z Data Privacy Passports V1.0 beta program, see Software Announcement 219-452, dated September 12, 2019. • IBM Z Data Privacy for Diagnostics provides clients with the capability to protect sensitive data that may be included in diagnostic dumps. Now sensitive data can be tagged such that it can be identified in dumps with no impact to dump capture times.
    [Show full text]
  • 18Th ABMF Agenda
    28th ASEAN+3 Bond Market Forum (ABMF) Meeting And relevant meetings 18-21 June 2018 / Seinan Gakuin University, Fukuoka City, Japan DAY 3 – 20 June 2018 Venue: Multi-Purpose Hall, 1st Floor, Centennial Hall TIME PROGRAM ABMF Sub Forum 2 (SF2) Meeting 08:30 – 09:00 Registration 09:00 – 09:05 Opening Remarks by Mr. Seung-Kwon Lee, SF2 Chair Session 12: RegTech in US 09:05 – 09:40 by Mr. Hudson Hollister, Data Transparency Coalition (DTC) via Webex - Financial Transparency Act in US Session 13: Enhanced Supervisions and Surveillance with Technology by Mr. Lim Kok Eng, Analytics Department, Securities Commission Malaysia 09:40 – 10:20 - XBRL submission platform - Web crawling robots - Artificial Intelligence for sentiment and text mining capability 10:20 – 10:45 Coffee break Session 14: Panel Discussion: Global trends in data collection and standardization for more structured data - What are the drivers of the trends? What are benefits and costs of building structured data environment? - What needs to be standardized (ISO 20022, XBRL, LEI, ISIN, CFI, etc)? - How can we standardize? What is the role of international body? - What does Asia need to understand and prepare? 10:45 – 12:15 Panelist: Mr. Francois Laurent, European Central Bank, ISO TC68 Mr. Masayuki Tagai, JP Morgan, ISO 20022 RMG Vice Convener Mr. Yoshiaki Wada, NTT Data, Chair of XBRL Asia Round Table Mr. Beju Shah, Bank of England Ms. Meiko Morioka, SWIFT Moderator: ADB 12:15 – 12:25 Wrap-up by ADB Secretariat 12:25 – 12:30 Closing Remarks by Mr. Seung-Kwon Lee, SF2 Chair 12:30 – 13:30 Lunch Farewell Dinner, Café d' Erte, 3rd floor, Hotel Clio Court Hakata, 18:30 – 20:30 5-3 Hakataekichuogai , Hakataku, Hakata, 812-0012 Fukuoka RegTech in the United States Hudson Hollister, Executive Director, Data Coalition @hudsonhollister What is RegTech? “RegTech” refers to technological solutions that perform one of the following functions: ● Automate regulatory compliance or regulatory reporting tasks.
    [Show full text]
  • ISO Update Supplement to Isofocus
    ISO Update Supplement to ISOfocus October 2019 International Standards in process ISO/CD Agricultural and forestry tractors — Roll-over 12003-2 protective structures on narrow-track wheeled An International Standard is the result of an agreement between tractors — Part 2: Rear-mounted ROPS the member bodies of ISO. A first important step towards an Interna- TC 28 Petroleum and related products, fuels tional Standard takes the form of a committee draft (CD) - this is cir- and lubricants from natural or synthetic culated for study within an ISO technical committee. When consensus sources has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International ISO/CD 11009 Petroleum products and lubricants — Deter- Standard (DIS). The DIS requires approval by at least 75 % of the mination of water washout characteristics of member bodies casting a vote. A confirmation vote is subsequently lubricating greases carried out on a final draft International Standard (FDIS), the approval ISO/CD 13736 Determination of flash point — Abel closed-cup criteria remaining the same. method ISO/CD TR Petroleum products and other liquids — Guid- 29662 ance for flash point testing ISO/CD Lubricants, industrial oils and related prod- 12925-2 ucts (class L) — Family C (Gears) — Part 2: Specifications of categories CKH, CKJ and CKM (lubricants open and semi-enclosed gear systems) CD registered TC 29 Small tools ISO/CD 525 Bonded abrasive products — General requirements Period from 01 September to 01 October 2019 ISO/CD 5743 Pliers and nippers — General technical These documents are currently under consideration in the technical requirements committee.
    [Show full text]
  • Download Complete 2016-17 Catalog
    2016-2017 ACADEMIC CATALOG Illinois Community College District No.518 www.sandburg.edu Main Campus Branch Campus 2400 Tom L. Wilson Blvd. 305 Sandburg Dr. Galesburg, IL 61401 Carthage, IL 62321 309.344.2518 217.357.2129 IT LAN & Security Specialist .......................................................... 73 Table of Contents Legal Office Assistant ..................................................................... 74 About Sandburg ....................................................................................... 2 Locomotive Electrical ...................................................................... 76 President's Message ............................................................................... 3 Locomotive Mechanical .................................................................. 77 Board of Trustees .................................................................................... 4 Magnetic Resonance Imaging (MRI) .............................................. 78 History ...................................................................................................... 5 Medical Office Professions ............................................................. 79 District Map .............................................................................................. 6 Medical Assisting ............................................................................ 81 Academic Calendar ................................................................................. 7 Mortuary Science ...........................................................................
    [Show full text]