Standard Colours.
COLORBOND® COLORBOND®
Pearl White APO Grey Anotec Natural Pearl Custom Black Monument® Woodland Grey®
GLOSS 1004 SATIN 1001 MATT 1009 MATT 1002 MATT 1011 MATT 1008
COLORBOND® COLORBOND® COLORBOND®
Surfmist® Primrose Paperbark® Dune®
MATT 1013 GLOSS 1005 MATT 1012 MATT 1010
Selected Pearls.
Citi Ultra Silver Precious Silver Pearl Kinetic Silver Medallist Charcoal Metallic Stormfront
PEARL MATT 3002 PEARL GLOSS 3006 PEARL SATIN 3007 PEARL SATIN 3005 GLOSS 3001 PEARL MATT 3004
Popular Colours.
COLORBOND®
Rivergum Beige Magnolia Classic Cream® White Birch Doeskin Pottery
GLOSS 2018 GLOSS 2012 MATT 2004 GLOSS 2026 SATIN 2006 SATIN 2017
COLORBOND® COLORBOND® COLORBOND®
Stone Beige Silver Grey Windspray® Pale Eucalypt® Wilderness® Basalt
MATT 2031 MATT 2021 MATT 2024 MATT 2015 MATT 2030 MATT 2027
COLORBOND®
Wallaby Notre Dame Ironstone® Berry Grey Dark Grey Charcoal
MATT 2028 GLOSS 2014 MATT 2010 SATIN 2001 MATT 2005 SATIN 2003
COLORBOND® COLORBOND®
Jasper® Hammersley Brown Manor Red®
MATT 2011 SATIN 2008 MATT 2013 Colour Matched Hardware Available
ThermalHEART™ Dual Finish Technology EXTERNAL In order to achieve excellent thermal performance, INTERNAL Single Finish ThermalHEART™ systems incorporate a polyamide insulator strip. This separates the internal and external Where you desire the same finish for your windows elements of the window or door to reduce the transfer and doors inside and out, select from any of the of heat and cold. colours in our wide range of finishes.
The innovative thermal insulator joining method allows EXTERNAL INTERNAL Dual Finish you to select a different finish on the inside and outside of your ThermalHEART™ windows and doors. This allows If you would like to utilise different finishes on the your new windows and doors to complement different inside and outside, simply select the two from the colour pallettes on the inside and outside of your home. above listing that suit your requirements.
The delivery time and cost of the finishes available in this finish card will vary depending on your choice. Please obtain a comprehensive quote from your Vantage or Elevate fabricator prior to placing your order. Finishes displayed on this finish card are a guide only and have been matched as close as possible to production standards under daylight conditions. Over time performance may vary between COLORBOND® steel and powder coated Vantage or Elevate joinery due to the different paint technologies used. When selecting powder coat finishes for multiple components of your build (i.e. window frames, window hardware, roofing, screening etc.), it is important to note that even when the same powder type (supplier code) is used, the actual colour and finish may vary slightly due to application variation, type of substrate and stoving conditions. COLOUR / VOLUME 1
All Vantage®, Elevate™ and Recommended Cleaning. ThermalHEART™ windows and Like any other painted surface, powder coated aluminium performs at its best when properly cared for. The key is doors are made to order so keeping the surface free from pollutants and environmental you have complete freedom to contaminants. choose the perfect colour and A gentle clean with a soft brush and mild detergent, followed by a fresh water rinse will maintain the long-term finish for your project. performance of your powder coated products. Cleaning in shade and during cooler parts of the day is ideal. Ensure Warranties. the cloths or brushes used are soft. Wipe gently to avoid scratches and scraping. The powder coat finish on Vantage® and Elevate™ windows and doors is supplied by market leaders Cleaning should be undertaken as below: Dulux Powder Coatings and Interpon. AWS offers • Rural and urban environmants: every 12 months comprehensive warranties on the finish of your Vantage® • Industrial, coastal or high pollution areas: every 3 months and Elevate™ joinery for your peace of mind. • Heavy industrial, marine or beachfront areas: monthly
Depending on your colour choice, you will benefit from Do not use strong solvents, abrasive cleaning products or warranty cover ranging from a minimum of 10 years. any product recommended for thinning paints. To remove Please consult your AWS fabricator to obtain details of splashed paint, sealants or mastics use white spirits. the warranty terms and conditions for the powder coat We recommend that prior to using any cleaning agent, test finish you have selected. a small non-visible area of your powder coated product to Anodising warranties vary based upon supplier, a ensure that no visual colour change or damage will occur. minimum of 25um anodising must be specified in coastal Ask your fabricator for the care and maintenance environments. Please consult your AWS fabricator for information specific to your product choice. details of the warranty terms and conditions for the finish you have selected.
HEAD OFFICE HAVE QUESTIONS? 76-78 Jedda Road, Call us at 1300 026 189 or email Prestons NSW 2170 [email protected] ABN 48 067 950 903 PO BOX 311 Liverpool NSW 1871