DOCSLIB.ORG

Boats and Harbors Publication 9-06

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Boats and Harbors Publication 9-06 ® BOATSBOATS && HARBORSHARBORS $4.00 THIRD SEPTEMBER ISSUE 2020 • VOLUME 63 NO. 14 “THE” MARINE MARKETPLACE Serving The East Coast, Gulf Coast, West Coast & InlandSince 1958Waterways PH: (931) 484-6100 • FAX: (931) 456-2337 • Email: [email protected] • www.boats-and-harbors.com EST.MARINA 1991 • ON LAKE NORMAN & BUSINESS • JUST OUTSIDE CHARLOTTE, FOR NC • 524’ MILESSALE OF SHORELINE BY • ORIGINAL ESTATE OWNER DIED • PROJECTED AS NEXT FASTEST GROWING AREA IN US • Only Large Piece Of Property For Future Hotel On The Water • Beside Federal Boat Launching Site 6.5 Acres Of Waterfront Property, Can Build Dry Storage • 38 Regular Boat Slips (2) Large Vessel Slips • 93’ Yacht & 67’ Riverboat Capacities 134 PP Each • Rental Income From Dock Leases, Event Spaces, Large Vessels Gazebo & Ampitheater – Weddings, Tours, Concerts Only Floating Dock Bar On Lake Norman Two Story Large Building With Very Large Kitchen Equipped • Grill, Restaurant Event Space With Two Stages, 30 Bathroom Stalls • (2) Lakefront Patios, (7) Bars Totally Stocked • 350 Paved Parking Spaces Fully Trained Staff & US Coast Guard 100 Ton Captains Price: $10.3 Million See More…WWW.QUEENSLANDING.COM & Live At RESORTCAMS/QUEENSLANDING Queens Landing1459 RIVER HWY. MOORESVILLE, NC 28117 Contact Deborah Harwell: (704) 663-2628 Ext. 110 • [email protected] No Real Estate Agent Inquiries Please Look Captains! If you want me to pull 2021 out of my bag in 3 months, you had better get your name off the Naughty List!!! BOATS & HARBORS ® P. O. Drawer 647 Crossville, Tennessee 38557-0647 USA Warren, R.I. – On Friday, August 28th, Breaker II completed its delivery voyage to the Robert Moses Niagara Power Plant, operated by New York Power Authority, the nation’s largest state power organization. The 56-foot, twin-screw tug was designed by Bristol Harbor Group of Bristol, RI and was constructed at the Blount Boats facility in Warren, RI. The vessel was designed with a reinforced hull for breaking ice efficiently. It will operate in seasonal ice near the entrance to and within the upper Niagara River. The dual-purpose vessel will prevent ice flow from clogging the intakes to the hydroelectric power plant and facilitate the installation and removal of ice booms. The diesel powered 56’ x 18.5, shallow draft tug is powered by two Caterpillar Tier III series C-9 engines, each producing 375 HP @ 1800 RPM. Ship’s service power comes from twin Caterpillar Tier III C2.2, 27eKW @1,800 RPM marine generator sets. Steel hull plating thickness’ range from 3/4 inch, 5/8 inch and 1/2 inch with 1 inch and 2 inch thick skeg plates. Ice Belt plating and plating to 1/3 abaft of the stem is ABS Grade “D” including the 1 inch and 2 inch skeg parts. All other plating is ABS Grade “A” steel. The vessel’s hull, machinery, electrical systems and safety equipment com- plies with the new USCG Subchapter M – Towing Vessels. This is the first Subchapter M certified vessel built at the Blount shipyard. For additional information contact Marcia Blount, President/CFO of Blount Boats, Inc. (401) 245-8300 See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS PAGE 2 - THIRD SEPTEMBER ISSUE 2020 WANTVALUEFORYOURADVERTISINGDOLLAR? QUICK SALE - MEDICAL REASONS DINNER CRUISE BOAT & WEBSITES Miami, FL 136 Pax. Operating Skipperliner. USCG Cert. May 2020 Dry Dock & Inspected. Fully OIL PADS Equipped For Immediate Charter Use. 3208 CAT, Twin Disc, (2) Gens, Multi Decks & Bars Only $21.00 Per Bale For Detailed Pics & Layouts Contact: Five Stocking Locations (305) 992-6838 • [email protected] 25’ LANDING CRAFT WORK BOAT 20’, 24’ - IN STOCK 45’ SIGHTSEER PASSENGER BOAT We Have The Best Prices On Oil Absorbents, Booms, Pads 800-9-BUYNETand Socks. www.buyingnetwork.com BOATS & HARBORS IS COI for 49+2 crew. Repowered 2018 w/150HP 21’ LANDING CRAFT - Yamahas. Lightly used, summers only, great 24’ DECK BARGE - IN STOCK END OF YEAR REDUCTION PRICE “THE” MARKET PLACE condition. New upholstery, railings & canopy in FOR THE MARINE INDUSTRY 2019.$139,000 Trailer included.• (850) 814-1467 101’ Halter Marine Work Vessel - 1980 Hull #861 M/V “Miss Aubrey Ann” Length: 101’ • Beam: 28’ • Light Draft: 6.5’ • Height: 30’ Gross Tons: 99 (2) Detroit Diesel 16V-92 (1,800HP), Twin Disc Model MG 527 3.68:1 Reduction (2) 50KW AC Delco/Detroit 4-71 Diesel Generators, Large Bridge, Crew Accom. For 20 Recent Survey Available (Value $350,000) Asking: $225,000 • Location: Gulf Coast ...MUST SELL! ALL REASONABLE OFFERS CONSIDERED... 30’ LANDING CRAFT - IN STOCK 27’ DUMP BARGE - IN STOCK ~ Stock Workboats Available ~ Workboats and Landing Craft in Stock LIFETYME BOATS, INC. 14104 Hwy 84, Jonesville, LA 71343 Phone (318) 339-4007 [email protected] www.lifetymeboats.com Phone: (561) 346-1616 • Email: [email protected] JUST A SAMPLE OF THE MANY CLASSIFIED HEADINGS AVAILABLE ADMIRALTY ATTORNEYS GEARS FOR SALE AIR COMPRESSORS FOR SALE GEARS WANTED Phone: (931) 484-6100 • (931) 484-8708 • Email: [email protected] AIR CONDITIONING EQUIPMENT GENERATORS FOR SALE AIRBOATS FOR SALE GENERATORS WANTED CLASSIFIED ADVERTISING RATES AIRCRAFT TIRES FOR SALE HELP WANTED 88 cents per word, minimum 20 words for $17.60 (charge covers two consecutive issues), AMPHIBIOUS EXCAVATORS WANTED HOIST/WINCHES FOR SALE $1.32 per word, minimum 20 words for $26.40 (covers three consecutive issues), $1.76 per AMPHIBIOUS VEHICLES INSTRUCTION word, minimum 20 words for $35.20 (covers four consecutive issues). Each additional consec- ANCHORS WANTED INVITATION FOR BIDS utive issue .44 cents per word. For “Blind” ads (B&H Box No. replies) add $4.00 for 2 issues ANCHORS/CHAINS FOR SALE LIFESAVING EQUIPMENT FOR SALE or $6.00 for 3 issues. Include in count words in name, address, (phone numbers count as 2 AQUACULTURE EQUIPMENT MARINAS FOR SALE words), & count each initial or number as a separate word unless considered good style to AUCTIONS MARINE CONTRACTORS EQUIPMENT group, as P.O., H.P., 16-278A, etc. but if more than seven characters count as two words. BARGE FOR SALE OR CHARTER MARINE RAILWAYS Email & Web addresses count as 3 words. BOLD TYPE - $1.20 per word 20 word minimum BARGES AND CRANES FOR SALE for $24.00 (charge covers two consecutive issues), $1.80 per word 20 word minimum for MISCELLANEOUS FOR SALE BARGES FOR SALE MISCELLANEOUS WANTED $36.00 (covers three consecutive REDissues), BOLD $2.40 TYPE per word 20 word minimum for $48.00 (cov- ers four consecutive issues), etc. - $1.20 per word + $10.00 Color Charge, BARGES WANTED NAUTICAL ANTIQUES FOR SALE 20 word minimum for $34.00 (charge covers two consecutive issues), $1.80 per word + $15.00 BEARINGS FOR SALE OUTDRIVES FOR SALE Color Charge, 20 word minimum for $51.00 (covers three consecutive issues), $2.40 per word + BIDS WANTED PERMITS FOR LEASE $20.00 Color Charge, 20 word minimum for $68.00 (covers four consecutive issues), etc. BOAT BUILDER PERMITS FOR SALE BOAT DELIVERIES PERMITS WANTED Classified advertising, set in 8 - point, easy to read type. CLASSIFIED TERMS BOAT HANDLING EQUIPMENT FOR SALE PILE DRIVER FOR SALE BOAT HULLS FOR SALE PILE DRIVING EQUIP FOR SALE Cash with order, except to municipal, county, state or federal institutions, 5 percent BOAT MOLDS FOR SALE PILE DRIVING EQUIP WANTED discount on individual orders amounting to $160.00 or more. No agency commission. BOAT PLANS PILING FOR SALE CLOSING DATES FOR CLASSIFIED BOAT SLIPS FOR SALE PILING WANTED BOAT TRAILERS FOR SALE POSITIONS WANTED 8th,18th, 28th, 10:00AM C.S.T. • Publication Approximately One Day Later. BOATS FOR LEASE OR CHARTER POWER UNITS FOR SALE (Unless otherwise published) BOATS FOR SALE PROPELLER SHAFTING FOR SALE “The Market Place for the Marine Industry” Since 1958 BOATS WANTED PROPELLERS FOR SALE Be The First To Reach Your Prospects BOATYARDS FOR SALE PROPULSION UNITS FOR SALE BOATYARDS WANTED PUMPS FOR SALE BOW THRUSTERS FOR SALE PUSHBOATS FOR SALE Buy BUOYS FOR SALE REAL ESTATE FOR SALE BUSINESS OPPORTUNITIES REFRIGERATION EQUIP FOR SALE Sell BUSINESSES FOR SALE REQUEST FOR PROPOSALS BUSINESSES WANTED ROPE FOR SALE Trade CRANE EQUIPMENT FOR SALE SAILBOATS FOR SALE CRANES FOR SALE SALVAGE EQUIPMENT FOR SALE Rent CRANES FOR SALE OR LEASE SANITATION SYSTEMS FOR SALE CUSTOM NOZZLES FOR SALE SCHOONERS FOR SALE Lease DIESEL FUEL COMPONENTS SEMI SUBMERSIBLES FOR SALE DIVING EQUIPMENT FOR SALE SERVICES OFFERED • DOORS/HATCHES FOR SALE SHIPS FOR SALE DREDGES FOR SALE SHIPYARDS Get DRYDOCKS FOR SALE SUBMARINES FOR SALE ENGINES FOR SALE TANKERS FOR SALE The ENGINES WANTED TOWBOATS FOR SALE Results ENGINE PARTS FOR SALE TRAILERS FOR SALE FERRYBOATS FOR SALE TUGBOATS FOR SALE You FISHING EQUIPMENT FOR SALE V-DRIVES FOR SALE Use a WANTED Ad For That FLOATING DOCKS FOR SALE WATERFRONT PROPERTY Want Hard To Find Item!!! FORKLIFTS FOR SALE WIRE ROPE FOR SALE GEAR PARTS FOR SALE YACHTS FOR SALE BOATS & HARBORS Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS THIRD SEPTEMBER ISSUE 2020 - PAGE 3 WE’RE HIRING SEEKING QUALIFIED CANDIDATES FOR THE FOLLOWING POSITIONS: CAPTAIN – 200 TON INLAND OR NEAR COASTAL MATE – 200 TON INLAND OR NEAR COASTAL ENGINEER – UNLICENSED DECKHAND – ABLE BODY OR ORDINARY SEAMAN PLEASE APPLY ONLINE ON OUR WEBSITE AT WWW.ICMTUGS.COM OR SEND YOUR RESUME TO BRITTANY HOLLOMAN AT [email protected] IF YOU HAVE ANY QUESTIONS, CALL THE MAIN OFFICE AT (757) 494-8847 JJ && BB BOATBOAT RENTALRENTAL LLCLLC HasJ Crew& Boats,B MANUFACTURINGWork Boats, Tug Boats and Living Quarters for Hire J & B Manufacturing Builds Work Boats and Crew Boats to Your Specifications We also have Coast Guard Plans to choose from, tell us what you want and we can build it These are a few vessels built by J & B Manufacturing.
Load more

Recommended publications
  • The Collection
    2014 THE COLLECTION GREAT LAKES SHIPYARD Jensen Maritime Consultants is a full-service naval architecture and marine engineering firm that delivers innovative, comprehensive and high-value engineering solutions to the marine community. 1 THE COLLECTION................................................................................3 60 WORKBOAT.............................................................................5 65 Z-DRIVE TUG...........................................................................7 74 MULTI-PURPOSE TUG...........................................................9 86 Z-DRIVE TUG..........................................................................11 92 ASD TRACTOR TUG.............................................................13 94 Z-DRIVE TUG.........................................................................15 100 Z-DRIVE TUG........................................................................17 100 LNG TUG...............................................................................19 111 MULTI-PURPOSE TUG..........................................................21 150 LINEHAUL TUG...................................................................23 CONTACT US.......................................................................................25 Great Lakes Shipyard is a full-service shipyard for new vessel and barge construction, fabrication, maintenance, and repairs in a state-of-the-art facility that includes a 770-ton mobile Travelift and a 300-ton floating drydock. 2 JENSEN SERIES THE COLLECTION
    [Show full text]
  • 92 Asd Tractor
    2014 JENSEN SERIES 92 ASD TRACTOR TUG GREAT LAKES SHIPYARD Jensen Maritime Consultants is a full-service naval architecture and marine engineering firm that delivers innovative, comprehensive and high-value engineering solutions to the marine community. 1 AT-A-GLANCE.......................................................................................3 ART & SCIENCE....................................................................................5 ENGINEERING EXCELLENCE...........................................................6 PROVEN DESIGN.................................................................................7 ELECTRONICS & NAVIGATION........................................................9 MACHINERY...........................................................................................11 DECK EQUIPMENT.............................................................................12 FIRE-FIGHTING...................................................................................13 SPECIFICATIONS.................................................................................15 CONTACT US.......................................................................................18 Great Lakes Shipyard is a full-service shipyard for new vessel and barge construction, fabrication, maintenance, and repairs in a state-of-the-art facility that includes a 770-ton mobile Travelift and a 300-ton floating drydock. 2 Designed by Jensen Maritime Consultants. Proudly built by Great Lakes Shipyard. The 92’ x 38’ tugboat is built to perform
    [Show full text]
  • Download Our Apps Iphone & Android Joseph Keefe, Editor, [email protected]
    The Information Authority for the Workboat • Offshore • Inland • Coastal Marine Markets Volume 27 • Number 7 arine JULY 2016 M News www.marinelink.com Propulsion Technology Full Speed Ahead with Volvo Penta Insights Propulsion Defined by Bob Kunkel ATB Design Comes of Age Marrying the hull to the propulsion package Emissions Proactive Partnership Produces Environmental Protection MN July16 C2, C3, C4.indd 1 6/20/2016 11:36:17 AM MN July16 Layout 1-17.indd 1 6/20/2016 3:13:24 PM CONTENTS MarineNews July 2016 • Volume 27 Number 7 Credit: Volvo Penta Credit: Volvo INSIGHTS 12 Robert Kunkel LNG? Methanol as fuel? Hybrid systems? Tier 4? MarineNews readers have questions and Bob Kun- kel has answers. Features Credit: Co., Inc Bouchard Transportation REGULATORY COMPLIANCE 24 ATB Design Comes of Age Bouchard’s newest ATB units have been exceeding 20 How Watertight is Your Integrity? performance expectations. Coordination between the design A watertight boat is a beautiful thing. It keeps you team and the propulsion OEM is a major reason why. afl oat in heavy seas. Can you say the same for your By Kathy A. Smith company’s integrity? By Captain Katharine Sweeney 30 Volvo Penta Debuts New Diesel Engine and IPS Volvo Penta’s concerted push into the commercial marine market continues with the introduction of the D8 diesel INSURANCE engine and the new IPS15 propulsion system. 22 Revised PREP Guidelines By Greg Trauthwein Effective June 2016: What You Should Know By Kate Kelley 38 Partnerships Produce Proactive Environmental Protection A forward-thinking approach by environmentally con- PROPULSION: EMISSIONS scious ferry operators produces green ferries that exceed local emission standards.
    [Show full text]
  • Download Caterpillar Parts Catalog
    NEW REPLACEMENT PARTS FOR HEAVY EQUIPMENT Integrated Toolcarrier / Compactor 31 Linear Actuators 50 INDEX Wheel Loader / Integrated Toolcarrier 31 Pressure Sensors 50 All part numbers available are not Vibratory Compactors 31 Magnetic Switches 50 Digital Hour Meters 31 Kickout and Bucket Positioners 50 included. This is not a full catalog. Gauges 32 Speed Sensors 50 INDEX Mechanical Temperature Gauges 32 Solenoids 51 AIR INLET & Electrical Temperature Gauges 32 Starting Motor Solenoids 51 EXHAUST SYSTEM 8 Pressure Transducer 32 Semi Solid Solenoids 51 Electrical Pressure Gauges 32 Fuel Shutoff Solenoids 51 Air Intake/ Exhaust Clamps 8 Mechanical Pressure Gauges 32 Starter Motors 51 Manifolds 8 Ammeters 33 Single Manifolds 8 Vane Air Starter Motors 52 Gas Springs 33 Switches 52 Group Manifolds 9 Steps 33 Mufflers 9 Steps Support 33 DIESEL ENGINE COMPONENTS 53 Muffler Pipes 10 Ignition Switches 33 Engine Blocks 55 Turbochargers 11 Mirrors 33 Custom Engines 55 Turbochargers for Komatsu® 14 Fuel Caps 34 Inframe Overhaul Kits 55 BEARINGS 15 Repair Kit 34 Inframe Overhaul Kits for Composite Bearings 15 Seats 34 Backhoe Applications 56 Premium Inframe Overhaul Kits 56 Sleeve Bearings 16 COOLING SYSTEM 36 Crankshafts 57 Spherical Bearings 16 Oil Coolers 36 Crankshafts for Komatsu® 57 QUALITY WITH VALUE... Tapered Roller Bearings 17 Radiators 37 Engine Bearings 57 TM Cone Bearings 17 Folded Core Radiators 37 Cup Bearings 17 Camshafts 58 Reversible & Standard Fans 38 Lifters 59 GUARANTEED Other Tapered Bearings also Available 18 Standard Fans 38
    [Show full text]
  • AP-900B Asphalt Paver Specalog
    AP-900B Rubber Tire Asphalt Paver Operating weight: with Extend-A-Mat B Screed 17 900 kg 39,350 lb with Pavemaster B Screed 16 300 kg 35,800 lb Hopper Capacity 6,1 cu m 215 cu ft Standard Paving Width 3,05 m 10 ft Maximum Paving Range: with Extend-A-Mat B Screed 2,44 - 7,37 m 8 - 24 ft 2 in with Pavemaster B Screed 2,44 - 9,14 m 8 - 30 ft Caterpillar® Diesel Engine Model 3116T is a high-tech six cylinder diesel engine designed to provide quiet performance, high reliability, easy servicing and excellent fuel economy. Turbocharged for top performance and efficiency especially at high altitudes. Transverse-mounted engine provides better cooling performance and greater accessibility for service. Meets EPA/CARB emissions engine regulations. Low sound emission complies with major regulatory rules according to Caterpillar sound pad test results. Heavy duty unit-type fuel injection and low pressure fuel lines minimize opportunity for fuel leaks. Intake manifold heater preheats incoming air for quick cold-weather starting. Hydrostatic Drive System Efficient hydraulic drive system eliminates chains and other mechanical linkages between diesel engine and final drive components. Fully hydrostatic transmission provides Dual-Displacement efficient, low-maintenance operation. Propel Motors Anti-slip/balance propel system assures either wheel will continue to drive even if the other wheel is slipping. Separate propel circuit for each drive wheel provides positive traction. Infinite speed selection within the pave and travel speed ranges. Optional front wheel assist enhances rimpull on soft bases. Single-Speed Variable-Displacement Planetary Drive Propel Pumps 2 Operator’s Station Single operator's station designed for comfort and optimum efficiency.
    [Show full text]
  • Caterpillar Machine Fluids Recommendations
    SEBU6250-15 January 2008 Caterpillar Machine Fluids Recommendations i01658146 Important Safety Information Most accidents that involve product operation, maintenance and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills and tools to perform these functions properly. Improper operation, lubrication, maintenance or repair of this product can be dangerous and could result in injury or death. Do not operate or perform any lubrication, maintenance or repair on this product, until you have read and understood the operation, lubrication, maintenance and repair information. Safety precautions and warnings are provided in this manual and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. The hazards are identified by the “Safety Alert Symbol” and followed by a “Signal Word” such as “DANGER”, “WARNING” or “CAUTION”. The Safety Alert “WARNING” label is shown below. The meaning of this safety alert symbol is as follows: Attention! Become Alert! Your Safety is Involved. The message that appears under the warning explains the hazard and can be either written or pictorially presented. Operations that may cause product damage are identified by “NOTICE” labels on the product and in this publication. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. The warnings in this publication and on the product are, therefore, not all inclusive. If a tool, procedure, work method or operating technique that is not specifically recommended by Caterpillar is used, you must satisfy yourself that it is safe for you and for others.
    [Show full text]
  • Evaluation of Integrated Electric Plants for Great Lakes Self-Unloaders
    Integrated Electric Plants in Future Great Lakes Self-Unloaders Type of Report: Final PI: Assistant Professor David J. Singer Phone: 734-764-4509 FAX: 734-936-8820 e-mail: [email protected] Co-PI: Professor Emeritus Michael G. Parsons Phone: 734-945-2886 FAX: 734-936-8820 e-mail: [email protected] Date: March 28, 2011 University of Michigan Department of Naval Architecture and Marine Engineering 2600 Draper Drive Ann Arbor, MI 48109-2145 This report represents the results of research conducted by the authors and does not necessarily represent the views or policies of the Great Lakes Maritime Research Institute. This report does not contain a standard or specified technique. The authors and the Great Lakes Maritime Research Institute do not endorse products or manufacturers. Trade or manufacturers’ names appear herein solely because they are considered essential to this report. Research funded in part by the Great Lakes Maritime Research Institute. This study was supported by the U.S. Department of Transportation, Office of the Secretary, Grant # DTMA1-G-10001. 1 Integrated Electric Plants in Future Great Lakes Self-Unloaders Michael G. Parsons1, David J. Singer2, and Samuel J. Denomy3 _______________________________________________________________________________________________________ The feasibility and potential benefits of using Integrated Electric Plants in future Great Lakes self-unloaders are evaluated. Integrated Electric Plants, the all-electric ship, utilize electrical propulsion motors and central station power generation that powers all propulsion, thruster, self-unloading equipment and other ship service needs. Integrated Electric Plants have become the plant of choice in many recent naval vessels, cruise ships, high technology cargo vessels and special purpose vessels, such as offshore supply and service vessels and icebreakers.
    [Show full text]
  • H:\My Documents\Article.Wpd
    Vehicle Data Codes as of 1/26/2010 Press CTRL + F to prompt the search field. VEHICLE DATA CODES TABLE OF CONTENTS 1--LICENSE PLATE TYPE (LIT) FIELD CODES 1.1 LIT FIELD CODES FOR REGULAR PASSENGER AUTOMOBILE PLATES 1.2 LIT FIELD CODES FOR AIRCRAFT 1.3 LIT FIELD CODES FOR ALL-TERRAIN VEHICLES AND SNOWMOBILES 1.4 SPECIAL LICENSE PLATES 1.5 LIT FIELD CODES FOR SPECIAL LICENSE PLATES 2--VEHICLE MAKE (VMA) AND BRAND NAME (BRA) FIELD CODES 2.1 VMA AND BRA FIELD CODES 2.2 VMA, BRA, AND VMO FIELD CODES FOR AUTOMOBILES, LIGHT-DUTY VANS, LIGHT- DUTY TRUCKS, AND PARTS 2.3 VMA AND BRA FIELD CODES FOR CONSTRUCTION EQUIPMENT AND CONSTRUCTION EQUIPMENT PARTS 2.4 VMA AND BRA FIELD CODES FOR FARM AND GARDEN EQUIPMENT AND FARM EQUIPMENT PARTS 2.5 VMA AND BRA FIELD CODES FOR MOTORCYCLES AND MOTORCYCLE PARTS 2.6 VMA AND BRA FIELD CODES FOR SNOWMOBILES AND SNOWMOBILE PARTS 2.7 VMA AND BRA FIELD CODES FOR TRAILERS AND TRAILER PARTS 2.8 VMA AND BRA FIELD CODES FOR TRUCKS AND TRUCK PARTS 2.9 VMA AND BRA FIELD CODES ALPHABETICALLY BY CODE 3--VEHICLE MODEL (VMO) FIELD CODES 3.1 VMO FIELD CODES FOR AUTOMOBILES, LIGHT-DUTY VANS, AND LIGHT-DUTY TRUCKS 3.2 VMO FIELD CODES FOR ASSEMBLED VEHICLES 3.3 VMO FIELD CODES FOR AIRCRAFT 3.4 VMO FIELD CODES FOR ALL-TERRAIN VEHICLES 3.5 VMO FIELD CODES FOR CONSTRUCTION EQUIPMENT 3.6 VMO FIELD CODES FOR DUNE BUGGIES 3.7 VMO FIELD CODES FOR FARM AND GARDEN EQUIPMENT 3.8 VMO FIELD CODES FOR GO-CARTS 3.9 VMO FIELD CODES FOR GOLF CARTS 3.10 VMO FIELD CODES FOR MOTORIZED RIDE-ON TOYS 3.11 VMO FIELD CODES FOR MOTORIZED WHEELCHAIRS 3.12
    [Show full text]
  • Application to Revise Minor Source Specific Permit AQ0215MSS03 for the Project Description
    Application to Revise Minor Source Specific Permit AQ0215MSS03 for City of Unalaska Dutch Harbor Power Plant Submitted To: Alaska Department of Environmental Conservation Division of Air Quality, Air Permits Program Prepared By: 200 West 34th Avenue, PMB 253, Anchorage, AK 99503 www.hmhconsulting.org December 2019 City of Unalaska, Dutch Harbor Power Plant Application to Revise AQ0215MSS03 December 2019 Table of Contents 1.0 Introduction .......................................................................................................................... 5 1.1 Facility Operations and Permitting History ..................................................................... 5 1.2 Project Purpose and Overview ......................................................................................... 7 1.3 Application Contents ........................................................................................................ 8 1.4 Location and Description of Project Area ........................................................................ 8 2.0 Stationary Source Identification .......................................................................................... 9 3.0 Emission Unit Inventory and Description.......................................................................... 10 4.0 Stationary Source Emissions and Permitting Applicability ............................................... 10 4.1 Applicability of PSD Permitting under 40 CFR 52.21 ................................................... 11 4.1.1 Major Modification
    [Show full text]
  • Caterpillar 966 H Manual
    Caterpillar 966 H Manual If looking for a book Caterpillar 966 h manual in pdf format, in that case you come on to the correct site. We furnish the complete release of this ebook in doc, ePub, txt, DjVu, PDF forms. You can reading online Caterpillar 966 h manual or download. Withal, on our site you can reading the manuals and other artistic eBooks online, or downloading theirs. We want to attract your consideration what our site not store the eBook itself, but we give link to site whereat you may downloading or reading online. So that if have necessity to downloading Caterpillar 966 h manual pdf, then you have come on to correct site. We have Caterpillar 966 h manual ePub, doc, PDF, txt, DjVu formats. We will be happy if you return to us over. Caterpillar 966 h manual Used Caterpillar 966 for sale. 232b, 966h and more Search 214 used Caterpillar 966 listings. Click for 966 h, 920, Caterpillar bitelli sf 102-asphalt Cat 966 manual Cat 966 Manual Caterpillar 966C Wheel Loader - RitchieWiki The Caterpillar 966C wheel loader was introduced in 1967 in the USA as a replacement for the Caterpillar 966c wheel loader - ritchiespecs Caterpillar 966C Wheel Loader. View Articles on this item. Print specification. H. Reach at Max Lift and Dump: 2.6 ft in: 790 mm: Specification. Engine: Make Caterpillar 966 h stvzo 2006-2011 specifications, See manuals, technical data, specifications and documentation of Caterpillar 966 H StVZO 2006-2011 in category Wheel Loaders. Learn more about Caterpillar 966 H StVZO Caterpillar 966h wheel loader - ritchiespecs Caterpillar 966H Wheel Loader.
    [Show full text]
  • Tug Boats for Sale Priced to Sell
    BECAUSE PERFORMANCE MATTERS AN INVESTMENT IN YOUR FLEET THAT PAYS FOR ITSELF Independently tested, high-performance hydrodynamic solutions help maximize power while reducing fuel consumption. WWW.NAUTICAN.COM Only ONE Radar clearly stands above the rest! Radar Series Selected by the USCG Cutter Fleet 20.1˝ Color LCD, 23.1˝ Color LCD or Black Box 12kW, 25kW or 50kW X-Band 30kW or 60kW S-Band ➤ Ethernet interswitching of up to four Radars ➤ Display ranges in Nautical Miles (nm) or Statute Miles (sm) ➤ Easy to use menus with trackball control ➤ On-screen “Tow Icon” displays length & width of ➤ Operator selected multi-color target presentation towboat/barges ➤ Available in X-Band and S-Band ➤ Chart overlay with optional CU200 chart card reader* ➤ ARPA — Auto plotting/tracking of 100 targets ➤ Interfaces with MaxSea TimeZero Navigation Software manually or automatically ➤ Backed by Furuno’s Worldwide Service Network ➤ Displays 1,000 AIS targets* ➤ Furuno’s Radar Technology has been awarded “Best Radar” by the National Marine Electronics Association for the past 35 years * Appropriate sensors required EXCLUSIVE: World’s fi rst IMO ECDIS that directly interfaces with Furuno’s FAR2xx7 Radar Series! ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM One of the outstanding features of Furuno commercial Radars is the Ethernet-based network capability, which makes it possible to create a navigation network with other onboard equipment such as the new FMD3200 ECDIS (Electronic Chart Display and Information System). The Ethernet-based data link makes the data transfer speedy and stable, while keeping maintenance simple. For more information on the New Furuno ECDIS, scan QR Code.
    [Show full text]
  • Resolution 2017-63
    MEMORANDUM TO COUNCIL TO: MAYOR AND CITY COUNCIL MEMBERS FROM: DAN WINTERS, DIRECTOR OF PUBLIC UTILITIES THRU: NANCY PETERSON, INTERIM CITY MANAGER DATE: OCTOBER 24, 2017 RE: RESOLUTION 2017-63 – A RESOLUTION OF THE UNALASKA CITY COUNCIL AUTHORIZING THE CITY MANAGER TO ENTER INTO AN AGREEMENT WITH V3 ENERGY, LLC, TO PERFORM THE WIND POWER DEVELOPMENT & INTEGRATION ASSESSMENT PHASE II PROJECT IN THE AMOUNT OF $45,481. SUMMARY: From 2003 to 2005, a Phase 1 analysis of the feasibility for wind energy in Unalaska was conducted by Northern Power Systems. Phase II of that project was never realized due to the inability of windmills of that era to withstand Unalaska’s wind speeds. Due to recent interest by the Unalaska City Council in renewable energy, coupled with the availability of new technology, the City of Unalaska Department of Public Utilities let a Request for Qualifications (RFQ) for Phase II of the Wind Power Development and Integration Assessment Project. Resolution No. 2017-63 will award the Phase II work to V3 Energy, LLC for $45,481 PREVIOUS COUNCIL ACTION: In 2003, Unalaska City Council approved the Wind Integration Assessment Project through Ordinance 2003-11. In FY2018 Council funded the Wind Power Development and Integration Assessment Project through Capital Budget Ordinance 2017-07 by providing $200,000 from the General Fund. BACKGROUND: In 1999, a Wind Energy Feasibility Study of Unalaska was conducted for the State of Alaska’s Division of Energy. In 2000, the US Department of Energy conducted an Energy Assessment for Unalaska as potential sites for future wind turbine development, in which Unalaska was ruled out due to the potential of excessively high wind speeds.
    [Show full text]