881/882 Video Test Instrument User Guide

Total Page:16

File Type:pdf, Size:1020Kb

Load more

881/882 Video Test Instrument

User Guide

881/882 Video Test Instrument, User Guide, Revision A.35 (9/23/10) Copyright 2010 Quantum Data. All rights reserved. The information in this document is provided for use by our customers and may not be incorporated into other products or publications without the expressed written consent of Quantum Data. Quantum Data reserves the right to make changes to its products to improve performance, reliability, producibility, and (or) marketability. Information furnished by Quantum Data is believed to be accurate and reliable. However, no responsibility is assumed by Quantum Data for its use.

Updates to this manual are available at http://www.quantumdata.com/support/downloads/.

Table of Contents

Chapter 1 Getting Started

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
882D features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Video interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Computer interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front panel interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Menu selection keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
882 file system and media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
882 file system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 882 media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
882 operational modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Booting up the 882 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Basic mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Browse mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Web interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Working with the Virtual Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Working with the CMD (Command) Terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Working with the 882 FTP Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Copying files between 882s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Command line interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Working with the serial interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Working with the network interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Sending commands interactively . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Sending command files (serial interface only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Working with user profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Chapter 2 Testing Video Displays

General video display testing procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

882 Video Test Instrument User Guide (Rev A.35)

i

Making physical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Selecting interface type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Selecting video format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Selecting image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Testing analog computer (IT) CRTs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Testing digital computer (IT) FPDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Testing analog composite video SDTV (CE) CRTs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Testing analog component video SDTV (CE) CRTs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Testing digital component video HDTV (CE) FPDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Testing SDI and HD-SDI digital component video studio displays . . . . . . . . . . . . . . . . . 69 Using the Image Caching feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Using the AuxTest image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Using the ImageShift utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Using the ImageShift utility through the front panel . . . . . . . . . . . . . . . . . . . . . . . . . 76 Using the ImageShift utility through the command line interface . . . . . . . . . . . . . . . 79
Adjust Frequency Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Keypad Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Chapter 3 Administrative Tasks

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Calibrating the generator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Calibrating signal level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Calibrating frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Auto Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Auto upgrade - Network Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Auto upgrade - PCMCIA/Compact Flash Method. . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Upgrading the generator locally . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Manually upgrading using PCMCIA Compact Flash card. . . . . . . . . . . . . . . . . . . . 109 Manually upgrading the generator without using PC Card . . . . . . . . . . . . . . . . . . . 111 Connecting generator directly to a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Reconfiguring and booting a stalled generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Cloning generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Cloning a generator using the PC card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Cloning a generator using the Generator FTP Browser . . . . . . . . . . . . . . . . . . . . . 125

ii

Table of Contents

Resetting a generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Viewing generator configuration information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Chapter 4 Networking 882s

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
882 file system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Configuring a file server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
File server specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Installing an FTP server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Copying resource files to the FTP site on the file server . . . . . . . . . . . . . . . . . . . . 140
Establishing a network environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Connecting 882s to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Setting the 882’s IP address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Setting the file server IP address in the 882. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Network operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Booting a 882 from the file server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Sharing objects on a file server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Controlling a 882 remotely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Using the Virtual Front Panel to operate a 882 remotely . . . . . . . . . . . . . . . . . . . . 151 Operating the 882 remotely through the command line interface. . . . . . . . . . . . . . 151
Upgrading 882s over a network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Upgrade options and procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Backing up the current files on the file server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Copying files to the PC file server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Removing current files from the 882s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 Copying the new files to each 882 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 Reboot the 882s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Cloning 882s using the 882 FTP Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

Chapter 5 Using GPIB Interface

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Setting the GPIB port address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 Queries and commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Queries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162

882 Video Test Instrument User Guide (Rev A.35)

iii

Sending commands and queries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Status queries and control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Status byte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Bus commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167

Chapter 6 Working with Formats

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Format library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Composite television format names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Component television format names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Computer display format names. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 Aperture designators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Viewing the source list of formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 Configuring format parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Viewing and modifying format parameters through the front panel . . . . . . . . . . . . 177 Viewing and modifying format parameters via the command line . . . . . . . . . . . . . 181 Viewing and modifying format parameters by editing XML files . . . . . . . . . . . . . . . 182
Format Editor Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Format Editor - Basic Window Configuration and Operation . . . . . . . . . . . . . . . . . 184 Format Editor - Top Level Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Format Editor - Menu Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 Format Editor - New Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Format Editor - New Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Format Editor - New Source Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 Format Editor - Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 Format Editor - Save. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Creating a new format using the Format Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 Creating custom formats using the command line interface . . . . . . . . . . . . . . . . . . . . . 222 Format catalogs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Using format catalogs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Creating format catalogs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Deleting format catalogs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225

Chapter 7 Working with Images

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230

iv

Table of Contents

Viewing the Content list of images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Viewing and modifying image options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 Viewing image versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Creating custom images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 Rendering bitmap images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Setting image component values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 Creating image catalogs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
Creating an image catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 Deleting an image catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245

Chapter 8 Working with Test Sequences

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 Viewing the test sequence list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
Viewing the test sequence list using the front panel. . . . . . . . . . . . . . . . . . . . . . . . 251 Viewing the test sequence list using the command line interface. . . . . . . . . . . . . . 251
Running a test sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
Running a test sequence using the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 Running a test sequence using the command line interface . . . . . . . . . . . . . . . . . 254
Creating a test sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
Creating a test sequence using the command line interface . . . . . . . . . . . . . . . . . 256 Editing a test sequence XML file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
Deleting a test sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263

Chapter 9 Testing HDMI Sink Devices

Overview of HDMI display testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
Physical connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266 Format selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 Image selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
Setting up the 882 for HDMI testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
Selecting video format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Testing HDMI displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 Testing HDMI 1.4 displays with 3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Rendering 3D images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Testing HDMI video pixel repetition (882 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 Testing HDMI audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289

882 Video Test Instrument User Guide (Rev A.35)

v

Testing 2-channel HDMI audio output from internal SPDIF source . . . . . . . . . . . . 289 Testing 8-channel HDMI audio output from internal source . . . . . . . . . . . . . . . . . . 292 Testing multi-channel compressed HDMI audio formats . . . . . . . . . . . . . . . . . . . . 296 Testing HDMI audio using an external audio source . . . . . . . . . . . . . . . . . . . . . . . 299
Testing HDMI InfoFrames (882 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
Viewing InfoFrame contents (882 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 Testing with Active Format Description (AFD) (882 only). . . . . . . . . . . . . . . . . . . . 306

Chapter 10 Testing Lipsync

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312 Testing display (sink) devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313

Chapter 11 Testing EDID for HDMI

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 Testing with display (sink) devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Viewing EDID from a display (882 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321 Generating an EDID Information Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 Modifying EDID in a display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326 Capturing and storing EDID from display device . . . . . . . . . . . . . . . . . . . . . . . . . . 327 Creating or editing EDID contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
Testing EDID for HDMI compliance in display (sink) devices . . . . . . . . . . . . . . . . . . . . 330
Testing HDMI sink device for EDID compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . 330 Verifying pixel encoding and rate support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
Using the EDID Editor tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352
Loading EDIDs with the EDID Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352 Editing an existing EDID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 Creating a new EDID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359 Saving an EDID to a file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368 Putting (Writing) EDID to a display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369 Emulating an EDID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 Running an EDID HDMI compliance test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371 Running an EDID data report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372
Using the EDID Compare tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374
Comparing EDIDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374

Recommended publications
  • Digital Video Quality Handbook (May 2013

    Digital Video Quality Handbook (May 2013

    Digital Video Quality Handbook May 2013 This page intentionally left blank. Executive Summary Under the direction of the Department of Homeland Security (DHS) Science and Technology Directorate (S&T), First Responders Group (FRG), Office for Interoperability and Compatibility (OIC), the Johns Hopkins University Applied Physics Laboratory (JHU/APL), worked with the Security Industry Association (including Steve Surfaro) and members of the Video Quality in Public Safety (VQiPS) Working Group to develop the May 2013 Video Quality Handbook. This document provides voluntary guidance for providing levels of video quality in public safety applications for network video surveillance. Several video surveillance use cases are presented to help illustrate how to relate video component and system performance to the intended application of video surveillance, while meeting the basic requirements of federal, state, tribal and local government authorities. Characteristics of video surveillance equipment are described in terms of how they may influence the design of video surveillance systems. In order for the video surveillance system to meet the needs of the user, the technology provider must consider the following factors that impact video quality: 1) Device categories; 2) Component and system performance level; 3) Verification of intended use; 4) Component and system performance specification; and 5) Best fit and link to use case(s). An appendix is also provided that presents content related to topics not covered in the original document (especially information related to video standards) and to update the material as needed to reflect innovation and changes in the video environment. The emphasis is on the implications of digital video data being exchanged across networks with large numbers of components or participants.
  • Model 5280 Digital to Analog Composite Video Converter Data Pack

    Model 5280 Digital to Analog Composite Video Converter Data Pack

    Model 5280 Digital to Analog Composite Video Converter Data Pack ENSEMBLE DESIGNS Revision 2.1 SW v2.0 This data pack provides detailed installation, configuration and operation information for the 5280 Digital to Analog Composite Video Converter and the 5210 Genlock option submodule as part of the Avenue Signal Integration System. The module information in this data pack is organized into the following sections: • Module Overview • Applications • Installation • Cabling • Module Configuration and Control ° Front Panel Controls and Indicators ° Avenue PC Remote Control ° Avenue Touch Screen Remote Control • Troubleshooting • Software Updating • Warranty and Factory Service • Specifications 5280-1 Model 5280 Video DAC MODULE OVERVIEW The 5280 module converts serial digital component video into composite analog video. Six separate composite or two Y/C (S-video) analog video outputs are available. The following analog formats are supported: • NTSC Composite with or without setup • PAL Composite A serial output BNC is provided for applications requiring the serial digital input signal to loop-through to another device. Output timing can be adjusted relative to a reference input signal by installing the 5210 Genlock Option, a submodule that plugs onto the 5280 circuit board. Incorporating a full- frame synchronizer, the 5210 also allows the 5280 to accept serial inputs that are asyn- chronous to the reference. As shown in the block diagram on the following page, the serial digital input signal first passes through serial receiver circuitry then on to EDH processing and deserializing. The serial output signal goes to a cable driver and is then AC coupled to a loop-through output BNC on the backplane.
  • Analog to Digital Converter User Guide

    Analog to Digital Converter User Guide

    Analog to Digital Converter User Guide ENSEMBLE DESIGNS Revision 5 SW v1.0.7 This user guide provides detailed information for using the BrightEye™2 Analog to Digital Converter. The information in this user guide is organized into the following sections: • Product Overview • Functional Description • Applications • Rear Connections • Operation • Front Panel Controls and Indicators • Using The BrightEye Control Application • Warranty and Factory Service • Specifications • Glossary BrightEye-1 BrightEye 2 Analog to Digital Converter PRODUCT OVERVIEW The BrightEye 2 Converter is a self-contained unit that provides uncompromised analog to digital conversion of component and composite video. Analog inputs are digitized at 12 bits of resolution with 4x oversampling. Composite video is processed through an adaptive comb filter decoder. PAL and NTSC input detection is automatic. Signal I/O and power is supplied to the rear of the unit. It is powered by a modular style power supply. Supporting both Beta and SMPTE component, composite and Y/C formats, BrightEye 2 adapts to many conversion needs. Use BrightEye 2 to digitize analog VTR and camera outputs for example. Front panel controls permit the user to monitor input status, select input type, and adjust video gain. Control and monitoring can also be done using the BrightEye Control application from a personal computer with USB support. A glossary of commonly used video terms is provided at the end of this guide. FUNCTIONAL DESCRIPTION The BrightEye 2 converter can perform analog to digital conversion on a variety of television signal formats, in both the 525/60Hz (NTSC) and 625/50Hz (PAL) line standards. The converter supports the NTSC and PAL composite standards, Y/C, and color difference analog component formats.
  • Types of Video Signals

    Types of Video Signals

    WIKIPEDIA SOURCE TYPES OF VIDEO SIGNALS Component video is a video signal that has been split into two or more component channels. In popular use, it refers to a type of component analog video (CAV) information that is transmitted or stored as three separate signals. Component video can be contrasted with composite video (NTSC, PAL or SECAM) in which all the video information is combined into a single line-level signal that is used in analog television. Like composite, component-video cables do not carry audio and are often paired with audio cables. When used without any other qualifications the term component video generally refers to analog YPbPr component video with sync on luma. Analog component video Reproducing a video signal on a display device (for example, a Cathode ray tube) (CRT) is a straightforward process complicated by the multitude of signal sources. DVD, VHS, computers and video game consoles all store, process and transmit video signals using different methods, and often each will provide more than one signal option. One way of maintaining signal clarity is by separating the components of a video signal so that they do not interfere with each other. A signal separated in this way is called "component video". S-Video, RGB and YPbPr signals comprise two or more separate signals: hence, all are component-video signals. For most consumer-level applications, analog component video is used. Digital component video is slowly becoming popular in both computer and home-theatre applications. Component video is capable of carrying signals such as 480i, 480p, 576i, 576p, 720p, and 1080i.
  • THS8200 All-Format Oversampled Component Video/PC Graphics D/A System with Three 11-Bit Dacs, CGMS Data Insertion

    THS8200 All-Format Oversampled Component Video/PC Graphics D/A System with Three 11-Bit Dacs, CGMS Data Insertion

    Product Sample & Technical Tools & Support & Folder Buy Documents Software Community THS8200 SLES032E –JUNE 2002–REVISED SEPTEMBER 2014 THS8200 All-Format Oversampled Component Video/PC Graphics D/A System With Three 11-Bit DACs, CGMS Data Insertion 1 Device Overview 1.1 Features 1 • Overall – Fully Programmable Display Timing Generator – Three 11-Bit 205-MSPS Digital-to-Analog to Supply All SDTV and HDTV Composite Sync Converters (DACs) With Integrated Bi-Level or Timing Formats, Progressive and Interlaced Tri-Level Sync Insertion – Fully Programmable Hsync and Vsync Outputs – Support for All ATSC Video Formats (Including – Vertical Blanking Interval (VBI) Override or Data 1080P) and PC Graphics Formats (up to UXGA Pass-Through for VBI Data Transparency at 75 Hz) – Programmable CGMS Data Generation and • Input Insertion – Flexible 10-, 15-, 16-, 20-, 24-, or 30-Bit Digital • Output Video Input Interface With Support for YCbCr or – Digital RGB Data, Either 4:4:4 or 4:2:2 Sampled • ITU-R BT.656 Digital Video Output Port – Video Synchronization by Hsync or Vsync – Analog Dedicated Inputs or by Extraction of Embedded • Analog Component Output from Software- SAV and EAV Codes According to ITU-R.BT601 Switchable 700-mV or 1.3-V Compliant (SDTV) or SMPTE 274M and SMPTE 296M Output DACs at 37.5-Ω Load (HDTV) • Programmable Video/Sync Ratio (7:3 or – Glueless Interface to TI DVI 1.0 (With HDCP) 10:4) Receivers. Can Receive Video-Over-DVI • Programmable Video Pedestal Formats According to the EIA-861 Specification and Convert to YPbPr or RGB Component • General Formats With Separate Syncs or Embedded – Built-In Video Color Bar Test Pattern Generator Composite Sync.
  • Understanding HD and 3G-SDI Video Poster

    Understanding HD and 3G-SDI Video Poster

    Understanding HD & 3G-SDI Video EYE DIGITAL SIGNAL TIMING EYE DIAGRAM The eye diagram is constructed by overlaying portions of the sampled data stream until enough data amplitude is important because of its relation to noise, and because the Y', R'-Y', B'-Y', COMMONLY USED FOR ANALOG COMPONENT ANALOG VIDEO transitions produce the familiar display. A unit interval (UI) is defined as the time between two adjacent signal receiver estimates the required high-frequency compensation (equalization) based on the Format 1125/60/2:1 750/60/1:1 525/59.94/2:1, 625/50/2:1, 1250/50/2:1 transitions, which is the reciprocal of clock frequency. UI is 3.7 ns for digital component 525 / 625 (SMPTE remaining half-clock-frequency energy as the signal arrives. Incorrect amplitude at the Y’ 0.2126 R' + 0.7152 G' + 0.0722 B' 0.299 R' + 0.587 G' + 0.114 B' 259M), 673.4 ps for digital high-definition (SMPTE 292) and 336.7ps for 3G-SDI serial digital (SMPTE 424M) sending end could result in an incorrect equalization applied at the receiving end, thus causing Digital video synchronization is provided by End of Active Video (EAV) and Start of Active Video (SAV) sequences which start with a R'-Y' 0.7874 R' - 0.7152 G' - 0.0722 B' 0.701 R' - 0.587 G' - 0.114 B' as shown in Table 1. A serial receiver determines if the signal is “high” or “low” in the center of each eye, and signal distortions. Overshoot of the rising and falling edge should not exceed 10% of the waveform HORIZONTAL LINE TIMING unique three word pattern: 3FFh (all bits in the word set to 1), 000h (all 0’s), 000h (all 0’s), followed by a fourth “XYZ” word whose B'-Y' -0.2126 R' - 0.7152 G' + 0.9278 B' -0.299 R' - 0.587 G' + 0.886 B' detects the serial data.
  • Compass 3.0 Presentation Switcher Manual

    Compass 3.0 Presentation Switcher Manual

    Compass 3.0 Presentation Switcher Manual 43234 LIT1605C © FSR Inc September 7, 2018 1 COPYRIGHT This document and the software described within it are copyrighted with all rights reserved. Under copyright laws, neither the documentation nor the software may be copied, photocopied, reproduced, translated, or reduced to electronic medium or machine readable form, in whole or in part, without prior written consent of FSR Inc. ("FSR"). Failure to comply with this condition may result in prosecution. FSR does not warrant that this product package will function properly in every hardware/software environment. Although FSR has tested the hardware, firmware, software and reviewed the documentation, FSR MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS HARDWARE, FIRMWARE, SOFTWARE OR DOCUMENTATION, THEIR QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. THIS SOFTWARE AND DOCUMENTATION ARE LICENSED 'AS IS', AND YOU, THE LICENSEE, BY MAKING USE THEREOF, ARE ASSUMING THE ENTIRE RISK AS TO THEIR QUALITY AND PERFORMANCE. IN NO EVENT WILL FSR BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE OR DOCUMENTATION, even if advised of the possibility of such damages. In particular, and without prejudice to the generality of the foregoing, FSR has no liability for any programs or data stored or used with FSR software, including costs of recovering such programs or data. Copyright (c) 2017 All World-wide Rights Reserved All trademarks acknowledged FSR operates a policy of continued product improvement, therefore specifications are subject to change without notice as products are updated or revised.
  • (DVB); Subtitling Systems

    (DVB); Subtitling Systems

    Digital Video Broadcasting (DVB); Subtitling Systems DVB Document A009 Nov 2017 This page is left intentionally blank 3 Contents Intellectual Property Rights ................................................................................................................................ 5 Foreword............................................................................................................................................................. 5 1 Scope ........................................................................................................................................................ 6 2 References ................................................................................................................................................ 6 2.1 Normative references ......................................................................................................................................... 6 2.2 Informative references ....................................................................................................................................... 6 3 Definitions and abbreviations ................................................................................................................... 7 3.1 Definitions ......................................................................................................................................................... 7 3.2 Abbreviations ....................................................................................................................................................
  • PM Series Input Output Boards Specification Rev3

    PM Series Input Output Boards Specification Rev3

    PM Series Input and Output Boards Specification [ Input Boards Specification ] HDMI Input Board (PM-HIS4) HDMI Input Board (PM-HIS4) Specifications Number of Port 4 HDMI ports, 4 Stereo In/out ports Female HDMI connector, Connector Type Female 3.5mm stereo jack RGB digital Video (DVI and HDMI standards) or Signal Type YCrCb digital component Video (HDMI) Dolby Digital® Plus, Dolby® TrueHD, DTS-HD Digital Audio High Res, DTS-HD Master Audio™, up to 8ch PCM Audio Extraction Via 3.5mm stereo Audio out ports Audio Insertion Via 3.5mm stereo Audio in ports Maximum Data Rate 3.4 Gbps per color (R,G,B) Maximum Pixel Clock 165 MHz Standard DVI 1.0 , HDMI 1.4 Switching Speed Max 200ns Output DVI Re-clocking Automatic Output Peripheral Device Power 600 mA per Output Input Equalization Automatic, Max 30m 1920 x1200 @50/60Hz or 1080p; 8 bit color HDCP Compatible HDCP version 2.0 Support Hot Plug Detection Yes Single Board Weight 0.5 lbs (0.23 kg) HDMI Input Board (PM-HIS4-U) HDMI Input Board (PM-HIS4-U) Specifications Number of Port 4 HDMI ports, 4 Stereo In/out ports Connector Type Female HDMI connector, Female 3.5mm stereo jack Signal Type RGB digital Video (DVI and HDMI standards) or YCrCb digital component Video (HDMI) Digital Audio Dolby Digital® Plus, Dolby® TrueHD, DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM Audio Extraction Via 3.5mm stereo Audio out ports Audio Insertion Via 3.5mm stereo Audio in ports Maximum Data Rate 3.4 Gbps per color (R,G,B) Maximum Pixel Clock 165 MHz Standard DVI 1.0 , HDMI 1.4 Switching Speed Max 200ns Output
  • Design Guide Switchers

    Design Guide Switchers

    System Planning & Design Resource Design Guide Switchers Video Walls Multiviewers Codecs KVM SPECTRUM To Our Valued Customers and Partners, We’re here to help you select the finest equipment that solves your challenges, in an elegant, intuitive, and purpose-built manner. Since 1987, we have been designing and manufacturing innovative solutions for the display, recording and transmission of computer and video signals. With advanced capabilities, proven reliability, and flexible user interfaces, our products are preferred by discriminating customers in commercial, military, industrial, medical, security, energy, and educational markets. In creating this guide, our primary goal is to help simplify the process of choosing the right product for each system. The introductory section includes an overview of current and emerging audiovisual technologies, followed by primers on Networked AV and 4K video technologies, a directory of RGB Spectrum products, case studies, and specifications for all RGB Spectrum products, sample system diagrams, and finally, a glossary of key terms and concepts. RGB Spectrum’s products work together to provide a key part of a system solution — the AV core around which the rest is designed. The case studies illustrate methods to configure both simple and advanced systems. You can expand upon these to meet the requirements of your customers. We are happy to assist our readers to develop better, more effective, and more profitable AV solutions. If you need more assistance, our Design Services team is at the ready to help guide you through the process of determining the optimal RGB Spectrum equipment for your project. Sincerely, Bob Marcus Founder and CEO RGB Spectrum TABLE OF CONTENTS Technology Tutorial .
  • Quick Start Guide See Page 7-14

    Quick Start Guide See Page 7-14

    This product has a fluorescent lamp that contains mercury. Model No. Disposal may be regulated in your community due to environmental TC-L32U22X considerations. For disposal or recycling information, please contact your TC-L37U22X local authorities, or the Electronic Industries Alliance: TC-L42U22X http://www.eiae.org. Operating Instructions 32”/37”/42” Class 1080p LCD HDTV (31.5/37.0/42.0 inches measured diagonally) Quick Start Guide See page 7-14 Customer’s Record The model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes. TM Model Number Serial Number Web Site: http://panasonic.net/ English Thank you for purchasing this Panasonic product. © Panasonic Corporation 2010 Printed in U.S.A. Please read these instructions before operating your set and retain them for future M0110-0 reference. The images shown in this manual are for illustrative purposes only. TQB2AC0003 Experience an amazing level of Contents multimedia excitement Please read before using the unit ● Safety Precautions ·········································4 Quick Start Guide Quick Start ● Accessories/Optional Accessory ····················7 Guide ● Basic Connection ···········································9 ● Identifying Controls ······································11 ● First Time Setup ···········································12
  • Video Demystified

    Video Demystified

    Video Demystified A Handbook for the Digital Engineer Fifth Edition by Keith Jack AMSTERDAM • BOSTON • HEIDELBERG • LONDON NEW YORK • OXFORD • PARIS • SAN DIEGO SAN FRANCISCO • SINGAPORE • SYDNEY • TOKYO ELSEVIER Newnes is an imprint of Elsevier Newnes Contents About the Author xix chapteri • introduction 1 Contents 3 Standards Organizations 5 Chapter 2 • Introduction to Video 6 Analog vs. Digital 6 Video Data 6 Digital Video 7 Video Timing 7 Video Resolution 9 Standard-Definition 9 Enhanced-Definition 9 High-Definition 11 Audio and Video Compression 11 Application Block Diagrams 11 DVD Players 11 Digital Media Adapters 12 Digital Television Set-Top Boxes 12 v vi Contents chapter 3 • Color Spaces 15 RGB Color Space 15 sRGB 16 scRGB 17 YUV Color Space 17 YIQ Color Space 18 YCbCr Color Space 19 RGB-YCbCr Equations: SDTV 19 RGB-YCbCr Equations: HDTV 20 4:4:4 YCbCr Format 21 4:2:2 YCbCr Format 22 4:1:1 YCbCr Format 22 4:2:0 YCbCr Format 22 xvYCC Color Space 26 PhotoYCC Color Space 26 HSI, HLS, and HSV Color Spaces 27 Chromaticity Diagram 28 Non-RGB Color Space Considerations 32 Gamma Correction 34 Constant Luminance Problem 36 References 36 chapter 4 • Video Signals Overview 37 Digital Component Video Background 37 Coding Ranges 37 480i and 480p Systems 39 576i and 576p Systems 48 720p Systems 56 1080i and 1080p Systems 59 Other Video Systems 64 References 67 / Contents vii chapter 5 • Analog Video Interfaces 68 S-Video Interface 68 SCART Interface 69 SDTVRGB Interface 71 HDTV RGB Interface 75 Constrained Image 77 SDTV YPbPr Interface 77 VBI