DOCSLIB.ORG

Toe 9260-50 Toe 9260-100

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Toe 9260-50 Toe 9260-100 Entwickelt und produziert in Deutschland Anstiegs- und Abfallzeiten NEU! von weniger als 1 µs! MICRO INTERRUPTIONS Micro-Switch TOE 9260 Micro-Switch TOE 9260 Elektronischer Schalter für kurze Unterbrechungen / Micro Interruptions. Der Micro-Switch TOE 9260 ist die erste Wahl zur Erzeugung kurzer Unterbrechungen von Versorgungsspannungen und damit ideal geeignet für normgerechte Prüfungen gemäß LV 124 / VW 80000 in Kfz-Bordnetzen. Bis zu einer Nennspannung von 60 V können Ströme modellabhängig bis zu 100 A geschaltet werden. Besondere Merkmale Eine Spannungsquelle bis zu 60 V mit angepasster Stromergiebigkeit liefert dabei die Versorgungs- • Eingangsspannung 60 V spannung. • Ausgangsstrom 50 A / 100 A • Anstiegs- / Abfallzeit < 1 µs Mit Hilfe eines externen Signalgenerators wird • kurzschlussfest nun der Stromfluss anforderungsgemäß mit dem • Entladung des Laststromkreises Schalter S 1 unterbrochen. Die Entladung des • abschaltbare Pufferung des Eingangskreises Lastkreises ist während der Unterbrechung des • 4 Signalleitungsschalter Laststroms durch einen weiteren internen Schalter • Ansteuerung mit beliebigen (S 2) möglich. Signalgeneratoren (TTL-Pegel) Vier Signalleitungsschalter (S 3 – S 6) ermöglichen Um normgerechte Prüfungen in Kfz-Bordnetzen zudem das präzise Schalten bzw. Unterbrechen durchzuführen, ist es u. a. erforderlich, Versorgungs- von Signal- und Steuerleitungen bei beliebiger spannungen kurzzeitig zu unterbrechen. Mit Stromflussrichtung. Die Ansteuerung dieser dem Micro-Switch TOE 9260 sind Schaltvorgänge Schalter erfolgt synchron zu S 1. zwischen < 10 µs und nahezu beliebiger Dauer problemlos möglich. Technische Daten TOE 9260-50 TOE 9260-100 Eingangsspannung max. 60 V max. 60 V Ausgangsstrom, DC 50 A 100 A Einschalt-Spitzenstrom 300 A 300 A Anstiegs- / Abfallzeit (tr, tf) < 1 µs < 1 µs @ 1 Ω oder 100 Ω TTL-Pegel, TTL-Pegel, Steuerspannung (Trigger) max. ± 20 V max. ± 20 V Signalleitungsschalter ± 60 V, ± 1 A ± 60 V, ± 1 A Anstiegs- / Abfallzeit (tr, tf) @ 100 Ω < 0,5 µs < 0,5 µs @ 1 Ω oder 1000 Ω < 10 µs < 10 µs Entwickelt und produziert in Deutschland Micro-Switch TOE 9260 Allgemeine Daten Versorgungsspannung 90–264 V, 47–63 Hz Leistungsaufnahme ca. 35 VA Arbeitstemperatur 0 °C bis 40 °C Lagertemperatur -20 °C bis 70 °C Referenztemperatur 23 °C ± 1 °C Kühlung Thermostatisch geregelter Lüfter Abmessungen (BxHxT) 224 x 88 x 325 mm (BxHxT mit Gerätefüßen) 224 x 104 x 325 mm 19“-System ½ 19“, 2 HE Gewicht ca. 4 kg Gehäuse Metall Bestellangaben Micro-Switch TOE 9260-50 60 V / 50 A TOE 9260-100 60 V / 100 A Optionen / Zubehör Micro-Switch TOE 9260/22 0,50 m Anschlusskabel mit 1 Sicherheitsbuchse, rot TOE 9260/23 0,50 m Anschlusskabel mit 1 Sicherheitsbuchse, blau TOE 9260/24 1,20 m Anschlusskabel mit 1 Sicherheitsbuchse rot TOE 9260/25 1,20 m Anschlusskabel mit 1 Sicherheitsbuchse blau TOE 9521 19“-Adapter 2 HE, für Einzelmontage TOE 9522 19“-Adapter 2 HE, Parallelmontage für 2 Geräte TOE 9260/100 Referenzwiderstandskit 1 Ω, 100 Ω, 1k Ω Mitgeliefertes Zubehör • 1 Bedienungsanleitung • 1 Kurzschlussbügel • 2 Anschlussbuchsen für S 3 – S 6 Unsere Kunden AEG EADS Kabelmetal electro GmbH Rockwell Automotive A.M.S. Software GmbH ebm-papst Gruppe Kathrein-Werke KG Rohde & Schwarz Alps Electric GmbH ELMOS KES RUAG artesyn elster KMW RUB LEMS ASKON Endress+Hauser Knorr Bremse AG Atlas Elektronik e·on KOSTAL H.-J. Schleißheimer Audi Eurocopter GmbH Krupp GmbH S&K Prüftechnik KUHNKE SENNHEISER BASF AG FH Braunschweig/Wolfenbüttel SIEMENS Bayer AG Fachhochschule Dortmund Labom Skoda Behr Hella Thermocontrol Ferrari Leica Camera GmbH ST Microelectronics GmbH Beiersdorf AG FESTO Ernst Leitz Wetzlar GmbH Stocko BENDER Fiat Automobile AG Lenze Beru AG Ford-Werke AG Linde Takati Petri AG BIOMET Fraunhofer Gesellschaft Lucas Automotive GmbH TU Darmstadt Blaupunkt Karl Freudenberg Lufthansa Technik AG Tektronix GmbH Boehringer Ingelheim KG fuba theben Boambardier Fujitsu GmbH MAN technologie Thomas Robert Bosch GmbH Maserati Thyssen AG B. Braun Melsungen AG Gidemeister Automation GmbH MAXIMATOR TRW Automotive Brose Fahrzeugteile GÖPEL electronic Max-Planck-Institute TT electronics Bugatti Engineering GmbH Gossen-Metrawatt Mercedes-Benz AG TÜV-Rheinland Busch-Jaeger GmbH Gould E.Merck Tyco Electronics Bühler Motor GSI Motorola mtu Valeo GmbH CERN Haas Laser GmbH VDE Continental AG Hahn-Meitner-Institut NOKIA Vickers System GmbH HARMAN/BECKER Voith Sulzer GmbH Daimler AG Hauni Werke, Körber Opel AG Voith Turbo GmbH John Deere Hella KG Hueck & Co. Osram GmbH Volkswagen AG Degussa Hanau Heraeus Sepatech GmbH DELPHI HIMA Pepperl + Fuchs GmbH WACHENDORFF DeltaTech Controls HIRSCHMANN Philips GmbH Wacker Chemie GmbH DESY Hochschule Furtwangen Phoenix Contact WAGO Deutsche Lufthansa AG Hoechst AG PHOENIX TESTLAB Webasto Diehl Avionik Systeme Hoffmann-La Roche AG Pierburg GmbH WEBER Diehl GmbH & Co. Hüls AG Dr. Ing. h.c.F. Porsche AG Weidmüller DLR preh YAZAKI DMT IAV GmbH PTB Dornier Luftfahrt GmbH IBM Deutschland GmbH ZF Antriebs- und Dräger iC Haus RAFI Fahrwerktechnik dSpace GmbH Infineon AG Rank Xerox GmbH Carl Zeiss Du pont Iskratel Reis Robotics GmbH ZOLLNER Rexroth Bosch Group Jena-Optronik GmbH Rheinmetall GmbH TOELLNER Electronic Instrumente GmbH Gahlenfeldstraße 31 · D-58313 Herdecke · Telefon +49 (0) 23 30 97 91 91 Fax +49 (0) 23 30 97 91 97 · E-Mail: [email protected] · www.toellner.de www.toellner.de.
Load more

Recommended publications
  • Leistung in Höchster Vollendung
    Entwickelt und produziert in Unsere Kunden Deutschland AEG EADS Kabelmetal electro GmbH Rockwell Automotive A.M.S. Software GmbH ebm-papst Gruppe Kathrein-Werke KG Rohde & Schwarz Alps Electric GmbH ELMOS KES RUAG artesyn elster KMW RUB LEMS ASKON Endress+Hauser Knorr Bremse AG Atlas Elektronik e·on KOSTAL H.-J. Schleißheimer Audi Eurocopter GmbH Krupp GmbH S&K Prüftechnik KUHNKE SENNHEISER BASF AG FH Braunschweig/Wolfenbüttel SIEMENS Bayer AG Fachhochschule Dortmund Labom Skoda Behr Hella Thermocontrol Ferrari Leica Camera GmbH ST Microelectronics GmbH Power by Beiersdorf AG FESTO Ernst Leitz Wetzlar GmbH Stocko BENDER Fiat Automobile AG Lenze NEU! Beru AG Ford-Werke AG Linde Takati Petri AG BIOMET Fraunhofer Gesellschaft Lucas Automotive GmbH TU Darmstadt Blaupunkt Karl Freudenberg Lufthansa Technik AG Tektronix GmbH Boehringer Ingelheim KG fuba theben Bombardier Fujitsu GmbH MAN technologie Thomas Robert Bosch GmbH Maserati Thyssen AG B. Braun Melsungen AG Gidemeister Automation GmbH MAXIMATOR TRW Automotive Brose Fahrzeugteile GÖPEL electronic Max-Planck-Institute TT electronics Bugatti Engineering GmbH Gossen-Metrawatt Mercedes-Benz AG TÜV-Rheinland Busch-Jaeger GmbH Gould E.Merck Tyco Electronics Bühler Motor GSI Motorola mtu Valeo GmbH CERN Haas Laser GmbH VDE Continental AG Hahn-Meitner-Institut NOKIA Vickers System GmbH HARMAN/BECKER Voith Sulzer GmbH Daimler AG Hauni Werke, Körber Opel AG Voith Turbo GmbH John Deere Hella KG Hueck & Co. Osram GmbH Volkswagen AG Degussa Hanau Heraeus Sepatech GmbH DELPHI HIMA Pepperl + Fuchs GmbH WACHENDORFF DeltaTech Controls HIRSCHMANN Philips GmbH Wacker Chemie GmbH DESY Hochschule Furtwangen Phoenix Contact WAGO Deutsche Lufthansa AG Hoechst AG PHOENIX TESTLAB Webasto Diehl Avionik Systeme Hoffmann-La Roche AG Pierburg GmbH WEBER Diehl GmbH & Co.
    [Show full text]
  • Court File No. ONTARIO SUPERIOR
    Court File No. ONTARIO SUPERIOR COURT OF JUSTICE (COMMERCIAL LIST) IN THE MATTER OF THE COMPANIES’ CREDITORS ARRANGEMENT ACT, R.S.C. 1985, c. C 36, AS AMENDED AND IN THE MATTER OF TK HOLDINGS INC., AND THOSE OTHER COMPANIES LISTED ON SCHEDULE “A” HERETO (collectively, the "Chapter 11 Debtors") APPLICATION OF TK HOLDINGS INC. UNDER SECTION 46 OF THE COMPANIES’ CREDITORS ARRANGEMENT ACT APPLICATION RECORD (re: Interim Recognition Order and Supplemental Recognition Order) (Returnable June 28, 2017) June 27, 2017 McCarthy Tétrault LLP Toronto Dominion Bank Tower Toronto, ON M5K 1E6 Fax: (416) 868-0673 Heather Meredith LSUC#: 48354R Tel: (416) 601-8342 Email: [email protected] Eric S. Block LSUC#: 47479K Tel: 416-601-7792 Email: [email protected] Paul Davis LSUC#: 65471L Tel: 416-601-8125 Email: [email protected] Trevor Courtis LSUC#: 67715A Tel: (416) 601-7643 Email: [email protected] Lawyers for the U.S. Foreign Representative TO: The Service List Index Tab Court File No. ONTARIO SUPERIOR COURT OF JUSTICE (COMMERCIAL LIST) IN THE MATTER OF THE COMPANIES’ CREDITORS ARRANGEMENT ACT, R.S.C. 1985, c. C 36, AS AMENDED AND IN THE MATTER OF TK HOLDINGS INC., AND THOSE OTHER COMPANIES LISTED ON SCHEDULE “A” HERETO (collectively, the "Chapter 11 Debtors") APPLICATION OF TK HOLDINGS INC. UNDER SECTION 46 OF THE COMPANIES’ CREDITORS ARRANGEMENT ACT APPLICATION RECORD (re: Interim Recognition Order and Supplemental Recognition Order) (Returnable June 28, 2017) INDEX Tab No. Documents 1. Notice of Application 2. Affidavit of Scott E. Caudill, sworn June 27, 2017 A. First Day Declaration B. Organizational Structure of the Debtors C.
    [Show full text]
  • List of References
    List of References Calibration Systems CS18, Vibration and Shock Exciters National Laboratories and Governmental Organizations BAST – Bundesanstalt für Straßenwesen (Germany) Beijing Orient Institute of Metrology & Test (China) CEM – Centro Español de Metrologia (Spain) CENAM – Centro Nacional de Metrologia (Mexico) CESTA – Centre d‘etudes scientifiques et techniques d‘Aquitaine (France) CMI – Czech Metrology Institute (Czech Republic) Eidgenössisches Institut für Metrologie METAS (Switzerland) FTZ – Forschungs- und Technologiezentrum Deutsche Bahn AG (Germany) Guangxi Metrology (China) GUM – GŁÓWNY URZĄD MIAR (Poland) IM2 – Instituto de Innovación en Minería y Metalurgía (Chile) KEBS – Kenya Bureau of Standards (Kenya) KRISS - Korea Research Institute of Standards and Science (South Korea) National Institute of Metrology (Thailand) National Institute of Metrology (China) NPL National Physical Laboratory (INDIA) PTB Physikalisch Technische Bundesanstalt (Germany) SIMT Shanghai Institute of Measurement and Testing Technology (China) STQC – Standardisation Testing and Quality Certification (India) TSU Technicky Skusobny Ustav Piestany (Slovakia) TTAI TÜV Rheinland TNO Automotive International B.V. (Netherlands) TUEV SUED CZ Praha (Czech Republic) Page 1 of 4 SPEKTRA www.spektra-dresden.com Questi prodotti sono distribuiti e supportati in Italia da: Instrumentation Devices Srl Via Acquanera 29 - 22100 COMO (Italy) ph +39 031 525 391- fax +39 031 507 984 [email protected] - www.instrumentation.it List of References Automotive Industry
    [Show full text]
  • Schilder Systeme 01 Katalog
    Namensschilder Systeme 01 Katalog Direkt vom Hersteller Wir machen Ihren Namen sichtbar 02 Namensschilder Systeme Überall, wo Menschen sich begegnen, verbessern Namens- schilder von badgepoint® die Kommunikation ! Präsentation Beratung und Information Veranstaltung Gesundheitswesen Verkauf und Service Hotel und Tourismus Namensschilder Systeme 1 Inhalt Die Firma badgepoint® . 2 Schildertypen . 4 Produktführer . 6 Produkte Inhalt polar® . 7 polar®„metal” . 13 polar®„color” . 14 polar®„quick-print” . 15 polar®„alu-print” . 16 polar®„color-print” . 17 polar®„alu-complete” . 18 polar®„color-complete” . 19 polar®„plexi-print” . 20 office . 21 o f fi c e „ c l a s s ic ” . 26 office „quick-print” . 27 office „alu-print” . 28 office „color-print” . 29 o f fi c e „ o b je c t ” . 30 amigo® . 31 amigo®„alu-print” . 35 amigo®„doming” . 36 aluline-plus . 37 aluline-plus „system“ . 39 aluline-plus „logo-print“ . 40 Acrylglasschilder . 41 plano . 46 profil . 47 skyline . 48 Veranstaltungsschilder . 49 event . 52 public . 53 forum . 54 ID-Schilder . 55 caddy . 58 Tischschilder . 59 pult . 62 table . 62 Alle badgepoint®-Namensschilder zeichnen sich durch besondere Anwenderfreundlichkeit und attraktives Design Befestigungstechnik aus. Das patentierte Magnetsystem smag® ist durch die Befestigungstechnik . 64 neuen Funktionen „twist-proof” und „easy-lift” jetzt noch Magnetsystem smag® . 66 besser zu handhaben. Es ist absolut verdrehsicher und trotz hoher Haftkraft leicht vom Gegenmagneten abzuheben. Extras Ersatzteilservice . 70 Zubehör . 71 Flaggensticker . 72 Software . 73 badgeserver de. 74 Beschriftungsservice . 75 Logovordruck „offset” . 76 Internationale Versionen des badgepoint® Hauptkatalogs finden Sie zum Download im Internet: Bestellung English: www.badgepoint.com Abwicklung Ihrer Bestellung . 78 Français: www.badgepoint.fr Liefer- und Zahlungsbedingungen .
    [Show full text]
  • Branchenbild WZ 34 Farbig.Qxd
    Branchenbild Strukturdaten Herstellung von Kraftwagen und Kraftwagenteilen in Nordrhein-Westfalen Stand: 2000 Ministerium für Wirtschaft und Mittelstand, Energie und Verkehr des Landes Nordrhein-Westfalen Diese Broschüre wurde erstellt vom: Institut Arbeit und Technik Gelsenkirchen im Auftrag des Ministeriums für Wirtschaft und Mittelstand, Energie und Verkehr des Landes Nordrhein-Westfalen. Bildmaterial © Copyright 2001 PhotoDisc, Inc Kontakte: Ministerium für Arbeit und Soziales, Qualifizierung und Technologie des Landes Nordrhein-Westfalen Referat 422 Tel: 0211/8618-3422 oder -3274 email: [email protected] http://www.masqt.nrw.de Institut Arbeit und Technik Jürgen Nordhause-Janz Munscheidstr. 14 45886 Gelsenkirchen Tel: 0209/1707118 Fax: 0209/1707110 email: [email protected] http://iat-info.iatge.de Inhalt Inhaltsverzeichnis Seite Vorwort 2 Die Herstellung von Kraftwagen und Kraftwagenteilen in Nordrhein-Westfalen 4 Die Herstellung von Kraftwagen und Kraftwagenteilen NRW in der internationalen Arbeitsteilung 13 Schwerpunkt: Innovation und Zukunftspotenziale in der Herstellung von Kraftwagen und Kraftwagenteilen NRW 18 Wichtige Adressen 23 Abbildungen Anteile der Wirtschaftssektoren an der Wirtschaftsleistung in NRW - 1963 bis 1998 - 2 Betriebsgrößen in der Herstellung von Kraftwagen und Kraftwagenteilen NRW 1999 - Anteile in % - 6 Regionale Verteilung der Hersteller von Kraftwagen und Kraftwagenteilen und des Verarbeitenden Gewerbes in NRW 8 - Anzahl der Betriebe 1999 - Umsatzentwicklung in der Herstellung von Kraftwagen und
    [Show full text]
  • Takata International Configuration and Coordination of a Japanese Automotive Supplier
    No. 70 – November 2019 Takata International Configuration and Coordination of a Japanese Automotive Supplier Stefan Schmid Felix Roedder ESCP Europe, Working Paper No. 70 – 11/19 No. 70 – November 2019 Takata International Configuration and Coordination of a Japanese Automotive Supplier Stefan Schmid Felix Roedder AUTHORS Prof. Dr. Stefan Schmid Chair of International Management and Strategic Management ESCP Europe Business School Berlin Heubnerweg 8-10, 14059 Berlin Germany T: +49 (0) 30 / 3 20 07-136 F: +49 (0) 30 / 3 20 07-107 [email protected] Dipl.-Reg. Wiss. Felix Rödder ISSN: 1869-5426 Department of International Management and Strategic Management EDITOR ESCP Europe Business School Berlin © ESCP Europe Wirtschaftshochschule Berlin Heubnerweg 8-10, 14059 Berlin Heubnerweg 8-10, 14059 Berlin, Germany Germany T: +49 (0) 30 / 3 20 07-0 T: +49 (0) 30 / 3 20 07-191 F: +49 (0) 30 / 3 20 07-111 F: +49 (0) 30 / 3 20 07-107 [email protected] [email protected] www.escpeurope.eu ESCP Europe, Working Paper No. 70 – 11/19 ABSTRACT: In less than 30 years, Takata ascended from a local Japanese manufacturer of seat belts to the world’s second-largest supplier of safety systems within the automotive industry. Rapid international expansion was a main driver of the firm’s growth. Takata had to develop adequate strategies to keep up with this development. The result was a broad array of configuration and coordination strategies, which are at the heart of this case study. To get to the bottom of Takata’s internationalization approaches, we begin by examining general characteristics of the automotive safety industry.
    [Show full text]
  • Emissions, Activity Data, and Emission Factors of Fluorinated Greenhouse Gases (F-Gases) in Germany 1995-2002
    Texte Emissions, Activity Data, 15 and Emission Factors of Fluorinated Greenhouse Gases 05 (F-Gases) in Germany ISSN 0722-186X 1995-2002 TEXTE ENVIRONMENTAL RESEARCH OF THE FEDERAL MINISTRY OF THE ENVIRONMENT, NATURE CONSERVATION AND NUCLEAR SAFETY Research Report 201 41 261/01 UBA-FB 000811/e Texte Emissions, Activity Data, and Emission Factors of 15 Fluorinated Greenhouse Gases (F-Gases) in Germany 05 1995-2002 ISSN 0722-186X Adaptation to the Requirements of International Reporting and Implementation of Data into the Centralised System of Emissions (ZSE) by Dr. Winfried Schwarz Öko-Recherche Büro für Umweltforschung und –beratung GmbH, Frankfurt/Main On behalf of the Federal Environmental Agency UMWELTBUNDESAMT This Publication is only available as Download under http://www.umweltbundesamt.de The publisher does not accept responsibility for the correctness, accuracy or completeness of the information, or for the observance of the private rights of third parties. The contents of this publication do not necessarily reflect the official opinions. Publisher: Federal Environmental Agency (Umweltbundesamt) P.O.B. 14 06 06844 Dessau Tel.: +49-340-2103-0 Telefax: +49-340-2103 2285 Internet: http://www.umweltbundesamt.de Edited by: Section III 1.4 Katja Schwaab Berlin, June 2005 Report Cover Sheet 1. Report No. 2. 3. UBA-FB 4. Report Title Emissions, Activity Data, and Emission Factors of Fluorinated Greenhouse Gases (F-Gases) in Germany 1995-2002. Adaptation to the Requirements of International Reporting und Implementation of Data into the Centralised System of Emissions (ZSE) (In German) 5. Authors, Family Names, First Names 8. Report Date 08.06, 2004 Dr. Winfried Schwarz 9.
    [Show full text]
  • Nummer 23/11 8 Juni 2011 Nummer 23/11 1 8 Juni 2011
    Nummer 23/11 8 juni 2011 Nummer 23/11 1 8 juni 2011 Inleiding Introduction Hoofdblad Patent Bulletin Het Blad de Industriële Eigendom verschijnt op de The Patent Bulletin appears on the 3rd working derde werkdag van een week. Indien NL day of each week. If the Netherlands Patent Octrooicentrum op deze dag is gesloten, wordt de Office is closed to the public on the above verschijningsdag van het blad verschoven naar de mentioned day, the date of issue of the Bulletin is eerstvolgende werkdag, waarop Octrooicentrum the first working day thereafter, on which the Nederland is geopend. Het blad verschijnt alleen in Office is open. Each issue of the Bulletin consists electronische vorm. Elk nummer van het blad bestaat of 14 headings. uit 14 rubrieken. Bijblad Official Journal Verschijnt vier keer per jaar (januari, april, juli, Appears four times a year (January, April, July, oktober) in electronische vorm via de website van NL October) in electronic form on the website of the Octrooicentrum. Het Bijblad bevat officiële Netherlands Patent Office. The Official Journal mededelingen en andere wetenswaardigheden contains announcements and other things worth waarmee NL Octrooicentrum en zijn klanten te maken knowing for the benefit of the Netherlands Patent hebben. Office and its customers. Abonnementsprijzen per (kalender)jaar: Subscription rates per calendar year: Hoofdblad en Bijblad: verschijnt gratis in Patent Bulletin and Official Journal: free of electronische vorm op de website van NL charge in electronic form on the website of the Octrooicentrum. Netherlands Patent Office. Adres: NL Octrooicentrum Address: Netherlands Patent Office Patentlaan 2 2 Patentlaan Postbus 5820 Post Office Box: 5820 2280 HV Rijswijk 2280 HV Rijswijk Telefoon: 088-6026656 Telephone: +31(0)88 602656 Telefax: 088-6029024 Telefax: +31(0)88 6029024 Bankrekeningnummer: Account: Voor taksen en depotrekeningen: RBS 056 99 94 098 Fees, deposit accounts: RBS 056 99 94 098 Iban: NL08RBOS0569994098 Iban: NL08RBOS0569994098 BIC: RBOSNL2A BIC: RBOSNL2A Nummer 23/11 2 8 juni 2011 Page Inhoudsopgave Blz.
    [Show full text]
  • In the United States Bankruptcy Court
    UNITED STATES BANKRUPTCY COURT SOUTHERN DISTRICT OF NEW YORK ----------------------------------------------------------------x In re : : Chapter 11 Case No. MOTORS LIQUIDATION COMPANY, et al., : f/k/a General Motors Corp., et al. : 09-50026 (REG) : Debtors. : (Jointly Administered) : ----------------------------------------------------------------x CERTIFICATE OF SERVICE I, Laurie M. Thornton, certify as follows: 1. I am a Senior Bankruptcy Consultant with the Business Reorganization Department in the Seattle office of The Garden City Group, Inc. (“GCG”), the claims and noticing agent for the Debtors and Debtors-in-possession (the “Debtors”) in the above-captioned proceeding. The business address of the Seattle office of GCG is 815 Western Avenue, Suite 200, Seattle, Washington 98104. 2. On July 15, 2009, at the direction of Weil, Gotshal & Manges LLP, counsel for the Debtors, I caused a true and correct copy of the following documents: • Order Pursuant to Fed. R. Bankr. P. 2002(a)(2) and 9006(c) Shortening Notice Period with Respect to Motion of the Debtors for Entry of Order Pursuant to 11 U.S.C. § 521 and Fed. R. Bankr. P. 1007(c) Further Extending Time to File Schedules of Assets and Liabilities, Schedules of Executory Contracts and Unexpired Leases, and Statements of Financial Affairs [Docket No. 3172]; and • Motion of Debtors for Entry of Order Pursuant to 11 U.S.C. § 521 and Fed. R. Bankr. P. 1007(c) Further Extending Time to File Schedules of Assets and Liabilities, Schedules of Executory Contracts and Unexpired Leases, and Statements of Financial Affairs [Docket No. 3180] to be served by electronic mail on the parties (master service list and notice of appearance parties) identified on Exhibit A attached hereto, by facsimile on the parties (master service list and notice of appearance parties without email addresses with facsimile numbers) identified on Exhibit B attached hereto, and on the parties (master service list and notice of appearance parties) identified in Exhibit C attached hereto.
    [Show full text]
  • Making Driving Safer Content
    Annual Report 2010 Making Driving Safer Content 03 Summary 04 President's Letter 07 Autoliv's Targets 08 Autoliv in Brief 10 Safety Systems 16 Innovations 17 Responsibility 22 Global Presence 24 The Market 26 Manufacturing & Purchasing 28 Quality 30 Shareholders FINANCIALS 34 Content 35 Management’s Discussion and Analysis 51 Management’s Report 52 Consolidated Statements of Income 53 Consolidated Balance Sheets 54 Consolidated Statements of Cash Flows 55 Consolidated Statements of Total Equity 56 Notes to Consolidated Financial Statements 8 7 Auditor’s Reports 79 Glossary and Definitions 80 Corporate Governance 82 Board of Directors 83 Executive Management Team 84 Contact Information & Financial Calendar 85 Multi-Year Summary Reader’s Guide Financial Information Autoliv Inc. is incorporated in Delaware, USA, and follows Every year, Autoliv publishes an annual report and a proxy The annual and quarterly reports, the proxy statement and Generally Accepted Accounting Principles in the United States statement prior to the Annual General Meeting of sharehold- Autoliv’s filings with the SEC as well as the Company’s Cor- (U.S. GAAP). This annual report also contains certain non-U.S. ers, see page 32. porate Governance Guidelines, Charters, Codes of Ethics and GAAP measures, see page 38 and page 49. All amounts in this The proxy statement provides information not only on the other documents governing the Company can be downloaded annual report are in U.S. dollars unless otherwise indicated. agenda for the meeting, but also on the work of the Board from the Company’s corporate website. Hard copies of the “We”, “the Company” and “Autoliv” refer to “Autoliv Inc.” and its committees as well as on compensation paid to and above-mentioned documents can be obtained free of charge as defined in Note 1 “Principles of Consolidation” on page 56.
    [Show full text]
  • Participant List
    CLEPA Meeting 23 April 2009, Stuttgart Airport Participant list Account Firstname Lastname 1 3M Deutschland GmbH Gabriele Weber 2 Adam Opel GmbH Harald Schenk 3 AMOScon GmbH Armin Ott 4 Automotive Lighting Reutlingen GmbH Fred Twardon 5 Bader GmbH & Co. Steffen Erhardt 6 BASF AG Ruth Zschiesche 7 Benteler AG Beatrix Kieke 8 Benteler Automobiltechnik GmbH Karlheinz Kalenberg 9 BERU AG Ulrich Bolay 10 BMW AG Karin Oldenburg-Nazaruk 11 BorgWarner Turbo Systems GmbH Sascha Weyer 12 Brose Fahrzeugteile GmbH & Co. KG Birgit Schmidt 13 Bühler Motor GmbH Libera Notarangelo 14 Bühler Motor GmbH Michael Keidel 15 Busac+Shamban Deutschland GmbH Anita Omorac 16 CLEPA - European Association of Automotive Suppliers Louis Sylvain Ayral 17 CLEPA - European Association of Automotive Suppliers Eleri Wessmann 18 Continental Automotive GmbH Bebra Kerstin Gembus 19 Continental Teves AG + Co. OHG Niels Warburg 20 Cooper-Standard Automotive Rick Comrie 21 Daimler AG Sven Doleski 22 Delphi Deutschland GmbH Thomas Stier iPoint-systems gmbh Ludwig-Erhard-Str. 52-56 Tel. +49 (7121)1 44 89-60 Geschäftsführer Amtsgericht Stuttgart 72760 Reutlingen Fax. +49 (7121)1 44 89-89 Jörg Walden & Francisco Benito USt.-Id.Nr. DE 813135964 [email protected] Handelsregister www.ipoint-systems.de HRB 353830 CLEPA Meeting 23 April 2009, Stuttgart Airport 23 Dietz-automotive GmbH & Co. KG Betina Bornschein 24 Dometic WAECO International GmbH Ramona Bems 25 EDS Operations Services GmbH Roland Seibert 26 Edscha Cabrio-Dachsysteme GmbH Anton Müller 27 F.S. Fehrer GmbH & Co. KG
    [Show full text]
  • Developing an Eastern Cape Auto Sector Strategy
    DEVELOPING AN EASTERN CAPE AUTO SECTOR STRATEGY A REPORT FOR THE EASTERN CAPE SOCIO-ECONOMIC CONSULTATIVE COUNCIL prepared by: Ian Russell This Report has been prepared at the request of the ECSECC, and is intended only for this purpose. March 2006 1 INTRODUCTION The purpose of this report is: • To describe and analyse the historical performance of the Automotive sector of the Eastern Cape economy and to identify current trends • To identify its growth and labour absorption potential • To identify key constraints or blockages • To identify key infrastructural blockages and constraints and to make recommendations on how Government and stakeholders can address the constraints / blockages in a more systematic and pragmatic way A significant amount of space is devoted to the global industry, its relationships and the inter-relationships between vehicle manufacturers (OEMs) and component suppliers. This has been done because the investment decisions internationally, and this is equally applicable to South Africa, are increasingly being driven by global considerations. These decisions are often, in turn, motivated by OEMs, with the appropriate supplier investments following. Further, the significant rationalisation taking place globally is resulting in a reduction in the number of OEMs, suppliers and model platforms, each of which will have repercussions in all automotive-producing countries. A proper understanding of these complex global trends is essential background to any approach to OEMs or component suppliers for investment. It is important, therefore, to realise that in attracting new investment to a country or a region, it is unlikely that a component supplier will set up a manufacturing base without prior assurance of OEM business, at least in the local market or for export volumes.
    [Show full text]