Environmental Protection Agency § 712.30

Total Page:16

File Type:pdf, Size:1020Kb

Environmental Protection Agency § 712.30 Environmental Protection Agency § 712.30 (2) A confidentiality statement § 712.30 Chemical lists and reporting signed and dated by an authorized per- periods. son located at the plant site or cor- (a)(1) Persons subject to this subpart porate headquarters of the respondent B must submit a Preliminary Assess- company. ment Information Manufacturer’s Re- (3) The specific chemical name and port for each chemical substance or Chemical Abstracts Service (CAS) Reg- mixture that is listed or designated in istry Number listed in 40 CFR 712.30. this section. (4) The name, company, address, city, State, ZIP code, and telephone number (2) Unless a respondent has already of a person who is submitting the form, prepared a Manufacturer’s Report in which may be a person located at a conformity with conditions set forth in plant site or corporate headquarters paragraph (a)(3) of this section, the in- that will serve as the respondent, and formation in each Manufacturer’s Re- will be able to answer questions about port must cover the respondent’s latest the information submitted by the com- complete corporate fiscal year as of the pany to EPA. A respondent to this sub- effective date. The effective date will part must include the appropriate Dun be 30 days after the FEDERAL REGISTER and Bradstreet Number for each plant publishes a rule amendment making site reported. the substance or mixture subject to (5) The plant site activities, such as this subpart B. the manufacturing of a chemical sub- (3) Persons subject to this subpart B stance, including the total quantity of need not comply with the requirements the chemical substance (in kilograms) of paragraph (a)(2) of this section if imported in bulk during the reporting they meet either one of the following period. conditions: (6) The total number of workers and (i)(A) The respondent has previously total worker-hours in each process cat- and voluntarily provided EPA with a egory, which includes enclosed process, Manufacturer’s Report on a chemical controlled release process, and open substance or mixture subject to sub- process. part B of this part, which contains data (7) The information related to chem- for a 1-year period ending no more than ical substance processing by cus- 3 years prior to the effective date de- tomers, including customers’ use in in- scribed in paragraph (a)(2) of this sec- dustrial and consumer products, the tion. Respondents meeting this condi- market names under which the chem- tion must notify EPA by letter of their ical substance is manufactured or im- desire to have the voluntary submis- ported, and the customer’s process cat- sion used in lieu of a current data sub- egories that are sold to customers for mission and must verify the complete- further processing. ness and current accuracy of the volun- (d) Persons must use the CISS tool to tarily submitted data. Such letters, complete and submit Form 7710–35, sent in accordance with the method Manufacturer’s Report, and accom- specified in § 712.28(d) to EPA, must panying letters, via CDX. Submission contain the following language: requires registration with CDX, and I hereby certify that, to the best of my must be made only as set forth in this knowledge and belief, all information en- section. tered on this form is complete and accurate. (e) To access the CISS tool go to I agree to permit access to, and the copying https://cdx.epa.gov/ssl/CSPP/ of records by, a duly authorized representa- PrimaryAuthorizedOfficial/Home.aspx tive of the EPA Administrator, in accord- and follow the appropriate links, and ance with the Toxic Substances Control Act, to document any information reported on for further instructions to go http:// the form. www.epa.gov/oppt/chemtest/ereporting/ index.html. (B) Notification letters must be sub- mitted in accordance with the method [47 FR 26998, June 22, 1982, as amended at 52 specified in § 712.28(d) prior to the re- FR 20083, May 29, 1987; 53 FR 12523, Apr. 15, 1988; 60 FR 31921, June 19, 1995; 60 FR 34463, porting deadline. July 3, 1995; 71 FR 47126, Aug. 16, 2006; 78 FR (ii)(A) The respondent has previously 72825, Dec. 4, 2013] submitted a Manufacturer’s Report on 67 VerDate Mar<15>2010 16:56 Aug 14, 2014 Jkt 232179 PO 00000 Frm 00077 Fmt 8010 Sfmt 8010 Q:\40\40V31.TXT 31 § 712.30 40 CFR Ch. I (7–1–14 Edition) a chemical substance or mixture sub- be added to this section 30 days after ject to subpart B of this part to the EPA issues for publication in the FED- Interagency Testing Committee, but ERAL REGISTER a rule amendment list- not to EPA, and that Manufacturer’s ing these chemical substances, mix- Report contained data for a 1-year pe- tures and categories. A Preliminary riod ending less than 3 years prior to Assessment Information—Manufactur- the effective date described in para- er’s Report must be submitted for each graph (a)(2) of this section. Respond- chemical substance and mixture within ents meeting this condition must sub- 60 days after the effective date of the mit a copy of the Manufacture’s Re- listing. At the discretion of the Assist- port, in accordance with the method ant Administrator for Chemical Safety specified in § 712.28(d) to EPA, and must and Pollution Prevention, a listed sub- submit an accompanying letter, also in stance, mixture or category may be accordance with the methods specified withdrawn, for good cause, from the in § 712.28(d), notifying EPA of the re- rule’s reporting requirements prior to spondent’s intent that the submission the effective date. Any information be used in lieu of a current Manufac- submitted showing why a substance, turer’s Report. The notification letter mixture or category should be removed must verify the completeness and cur- from the rule must be received by EPA rent accuracy of the voluntarily sub- within 14 days after the date of publi- mitted data. Such a letter must con- cation of the notice under this para- tain the following language: graph. If a substance, mixture or cat- I hereby certify that, to the best of my egory is removed, a FEDERAL REGISTER knowledge and belief, all information en- notice announcing this decision will be tered on this form is complete and accurate. published no later than the effective I agree to permit access to, and the copying date of the amendment. of records by, a duly authorized representa- tive of the EPA Administrator, in accord- (2) You must submit the information ance with the Toxic Substances Control Act, using the method specified in to document any information reported on § 712.28(d). the form. (d) Manufacturers and importers of (B) The submission must be made the substances listed below must sub- prior to the reporting deadline. mit a Preliminary Assessment Infor- (b) Except as provided in paragraph mation Manufacturer’s Report for each (c) of this section, chemical substances site at which they manufacture or im- and designated mixtures will be added port each substance by the reporting after a notice of proposed amendment date shown in the table below. The sub- of this subpart is published in the FED- stances are listed in Chemical Ab- ERAL REGISTER. There will be a 30 day stracts Service Registry Number order. public comment period on each notice; Typically EPA lists the trivial or com- after consideration of the comments, a mon name first, then, following the final amendment will identify the sub- symbol ‘‘- -’’, EPA lists the substance stances and mixtures added. by its TSCA Chemical Substance In- (c)(1) Chemical substances, mixtures, ventory name. Whenever EPA lists a and categories of substances or mix- single name, the name may be either tures that have been added by the the TSCA Chemical Substance Inven- Interagency Testing Committee, estab- tory name, a trivial name, or a com- lished under section 4(e) of TSCA, to mon name. Generally, when a single the section 4(e) Priority List, for test- name is listed, it is the TSCA Chemical ing consideration by the Agency, will Substances Inventory name. Effective Reporting CAS No. Substance date date 78-10-4 Ethyl silicate............................................................................................................ 8/23/00 10/23/00 90-30-2 N-Phenyl-1-naphthylamine ...................................................................................... 9/30/91 11/27/91 100-40-3 4-Vinylcyclohexene ................................................................................................. 1/11/90 3/12/90 108-95-5 Thiophenol .............................................................................................................. 1/26/94 3/28/94 109-87-5 Methylal ................................................................................................................... 8/23/00 10/23/00 118-79-6 2,4,6-tribromophenol ............................................................................................... 1/11/90 3/12/90 133-49-3 Pentachlorothiophenol ............................................................................................ 8/27/01 10/24/01 136–35–6 1-Triazene, 1,3-diphenyl-........................................................................................ 7/11/03 9/9/03 68 VerDate Mar<15>2010 16:56 Aug 14, 2014 Jkt 232179 PO 00000 Frm 00078 Fmt 8010 Sfmt 8010 Q:\40\40V31.TXT 31 Environmental Protection Agency § 712.30 Effective Reporting CAS No. Substance date date 143-33-9 Sodium cyanide...................................................................................................... 10/29/90 12/27/90 496-46-8 Glycoluril ................................................................................................................
Recommended publications
  • Transport of Dangerous Goods
    ST/SG/AC.10/1/Rev.16 (Vol.I) Recommendations on the TRANSPORT OF DANGEROUS GOODS Model Regulations Volume I Sixteenth revised edition UNITED NATIONS New York and Geneva, 2009 NOTE The designations employed and the presentation of the material in this publication do not imply the expression of any opinion whatsoever on the part of the Secretariat of the United Nations concerning the legal status of any country, territory, city or area, or of its authorities, or concerning the delimitation of its frontiers or boundaries. ST/SG/AC.10/1/Rev.16 (Vol.I) Copyright © United Nations, 2009 All rights reserved. No part of this publication may, for sales purposes, be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, electrostatic, magnetic tape, mechanical, photocopying or otherwise, without prior permission in writing from the United Nations. UNITED NATIONS Sales No. E.09.VIII.2 ISBN 978-92-1-139136-7 (complete set of two volumes) ISSN 1014-5753 Volumes I and II not to be sold separately FOREWORD The Recommendations on the Transport of Dangerous Goods are addressed to governments and to the international organizations concerned with safety in the transport of dangerous goods. The first version, prepared by the United Nations Economic and Social Council's Committee of Experts on the Transport of Dangerous Goods, was published in 1956 (ST/ECA/43-E/CN.2/170). In response to developments in technology and the changing needs of users, they have been regularly amended and updated at succeeding sessions of the Committee of Experts pursuant to Resolution 645 G (XXIII) of 26 April 1957 of the Economic and Social Council and subsequent resolutions.
    [Show full text]
  • PROVISIONAL PEER-REVIEWED TOXICITY VALUES for VANADIUM and ITS SOLUBLE INORGANIC COMPOUNDS OTHER THAN VANADIUM PENTOXIDE (CASRN 7440-62-2 and Others)
    EPA/690/R-09/070F l Final 9-30-2009 Provisional Peer-Reviewed Toxicity Values for Vanadium and Its Soluble Inorganic Compounds Other Than Vanadium Pentoxide (CASRN 7440-62-2 and Others) Derivation of Subchronic and Chronic Oral RfDs Superfund Health Risk Technical Support Center National Center for Environmental Assessment Office of Research and Development U.S. Environmental Protection Agency Cincinnati, OH 45268 Commonly Used Abbreviations BMD Benchmark Dose IRIS Integrated Risk Information System IUR inhalation unit risk LOAEL lowest-observed-adverse-effect level LOAELADJ LOAEL adjusted to continuous exposure duration LOAELHEC LOAEL adjusted for dosimetric differences across species to a human NOAEL no-observed-adverse-effect level NOAELADJ NOAEL adjusted to continuous exposure duration NOAELHEC NOAEL adjusted for dosimetric differences across species to a human NOEL no-observed-effect level OSF oral slope factor p-IUR provisional inhalation unit risk p-OSF provisional oral slope factor p-RfC provisional inhalation reference concentration p-RfD provisional oral reference dose RfC inhalation reference concentration RfD oral reference dose UF uncertainty factor UFA animal to human uncertainty factor UFC composite uncertainty factor UFD incomplete to complete database uncertainty factor UFH interhuman uncertainty factor UFL LOAEL to NOAEL uncertainty factor UFS subchronic to chronic uncertainty factor i FINAL 9-30-2009 PROVISIONAL PEER-REVIEWED TOXICITY VALUES FOR VANADIUM AND ITS SOLUBLE INORGANIC COMPOUNDS OTHER THAN VANADIUM PENTOXIDE (CASRN 7440-62-2 and others) Background On December 5, 2003, the U.S. Environmental Protection Agency's (U.S. EPA) Office of Superfund Remediation and Technology Innovation (OSRTI) revised its hierarchy of human health toxicity values for Superfund risk assessments, establishing the following three tiers as the new hierarchy: 1) U.S.
    [Show full text]
  • WO 2016/074683 Al 19 May 2016 (19.05.2016) W P O P C T
    (12) INTERNATIONAL APPLICATION PUBLISHED UNDER THE PATENT COOPERATION TREATY (PCT) (19) World Intellectual Property Organization International Bureau (10) International Publication Number (43) International Publication Date WO 2016/074683 Al 19 May 2016 (19.05.2016) W P O P C T (51) International Patent Classification: (81) Designated States (unless otherwise indicated, for every C12N 15/10 (2006.01) kind of national protection available): AE, AG, AL, AM, AO, AT, AU, AZ, BA, BB, BG, BH, BN, BR, BW, BY, (21) International Application Number: BZ, CA, CH, CL, CN, CO, CR, CU, CZ, DE, DK, DM, PCT/DK20 15/050343 DO, DZ, EC, EE, EG, ES, FI, GB, GD, GE, GH, GM, GT, (22) International Filing Date: HN, HR, HU, ID, IL, IN, IR, IS, JP, KE, KG, KN, KP, KR, 11 November 2015 ( 11. 1 1.2015) KZ, LA, LC, LK, LR, LS, LU, LY, MA, MD, ME, MG, MK, MN, MW, MX, MY, MZ, NA, NG, NI, NO, NZ, OM, (25) Filing Language: English PA, PE, PG, PH, PL, PT, QA, RO, RS, RU, RW, SA, SC, (26) Publication Language: English SD, SE, SG, SK, SL, SM, ST, SV, SY, TH, TJ, TM, TN, TR, TT, TZ, UA, UG, US, UZ, VC, VN, ZA, ZM, ZW. (30) Priority Data: PA 2014 00655 11 November 2014 ( 11. 1 1.2014) DK (84) Designated States (unless otherwise indicated, for every 62/077,933 11 November 2014 ( 11. 11.2014) US kind of regional protection available): ARIPO (BW, GH, 62/202,3 18 7 August 2015 (07.08.2015) US GM, KE, LR, LS, MW, MZ, NA, RW, SD, SL, ST, SZ, TZ, UG, ZM, ZW), Eurasian (AM, AZ, BY, KG, KZ, RU, (71) Applicant: LUNDORF PEDERSEN MATERIALS APS TJ, TM), European (AL, AT, BE, BG, CH, CY, CZ, DE, [DK/DK]; Nordvej 16 B, Himmelev, DK-4000 Roskilde DK, EE, ES, FI, FR, GB, GR, HR, HU, IE, IS, IT, LT, LU, (DK).
    [Show full text]
  • Crude Ticl4 Purification: a Review of the Current State of the Art and Future Opportunities
    Crude TiCl4 purification: a review of the current state of the art and future opportunities L. Hockaday and A. Kale Mintek, Randburg, South Africa Raw titanium tetrachloride (TiCl4) is produced by chlorination of titania feedstock. Prior to its utilization in the manufacture of titanium dioxide pigment or titanium metal, the TiCl4 is purified by adding reagents that react with the impurities in the crude TiCl4, followed by distillation of the mixture. The current state of the art in purification of crude TiCl4 was surveyed. Tests were conducted at the laboratory scale to assess the efficiency of various additives used in the purification process to minimize the vanadium content in the distillate. The effects of various reagents, namely oleic acid, sodium oleate, potassium oleate, and copper on the purification of crude TiCl4 were compared. The purified TiCl4 was water-clear in aspect and analysed < 2 ppm vanadium for all reagents tested. Possible reactions between the impurities in the crude TiCl4 and the reagents are investigated thermodynamically with the FactSage program. INTRODUCTION Titanium tetrachloride (TiCl4) is obtained by the chlorination of a titanium-bearing mineral such as ilmenite and rutile, as well as from titanium slag. The chlorination process usually takes place in a fluidized bed in the presence of chlorine gas and a reducing agent such as petroleum coke, resulting in crude titanium tetrachloride. TiCl4 is an intermediate product in the production of titanium dioxide (TiO2) pigment and titanium metal. The pure form of titanium dioxide is used in the pigment industry for paints, food colouring etc., and titanium metal is widely used in the aerospace, medicine, sport, and semiconductor production industries.
    [Show full text]
  • Toxicological Profile for Vanadium
    VANADIUM 107 4. CHEMICAL AND PHYSICAL INFORMATION 4.1 CHEMICAL IDENTITY Vanadium is a naturally occurring element that appears in group 5(B5) of the periodic table (Lide 2008). Vanadium is widely distributed in the earth’s crust at an average concentration of 100 ppm nd (approximately 100 mg/kg), similar to that of zinc and nickel (Byerrum 1991). Vanadium is the 22 most abundant element in the earth’s crust (Baroch 2006). Vanadium is found in about 65 different minerals; carnotite, roscoelite, vanadinite, and patronite are important sources of this metal along with bravoite and davidite (Baroch 2006, Lide 2008). It is also found in phosphate rock and certain ores and is present in some crude oils as organic complexes (Lide 2008). Table 4-1 lists common synonyms and other pertinent identification information for vanadium and representative vanadium compounds. 4.2 PHYSICAL AND CHEMICAL PROPERTIES Vanadium is a gray metal with a body-centered cubic crystal system. It is a member of the first transition series. Because of its high melting point, it is referred to as a refractory metal (Baroch 2006). When highly pure, it is a bright white metal that is soft and ductile. It has good structural strength and a low- fission neutron cross section. Vanadium has good corrosion resistance to alkalis, sulfuric and hydrochloric acid, and salt water; however, the metal oxidizes readily above 660 °C (Lide 2008). The chemistry of vanadium compounds is related to the oxidation state of the vanadium (Woolery 2005). Vanadium has oxidation states of +2, +3, +4, and +5. When heated in air at different temperatures, it oxidizes to a brownish black trioxide, a blue black tetraoxide, or a reddish orange pentoxide.
    [Show full text]
  • PURIFICATION of Ticl4 TROUGH the PRODUCTION of NEW CO
    (19) TZZ _T (11) EP 2 678 276 B1 (12) EUROPEAN PATENT SPECIFICATION (45) Date of publication and mention (51) Int Cl.: of the grant of the patent: C01G 23/02 (2006.01) 26.11.2014 Bulletin 2014/48 (86) International application number: (21) Application number: 12716742.7 PCT/US2012/026196 (22) Date of filing: 22.02.2012 (87) International publication number: WO 2012/116120 (30.08.2012 Gazette 2012/35) (54) PURIFICATION OF TiCL4 TROUGH THE PRODUCTION OF NEW CO-PRODUCTS REINIGUNG VON TICL4 DURCH HERSTELLUNG NEUER NEBENPRODUKTE PURIFICATION DE TiCL4 PAR LA PRODUCTION DE NOUVEAUX CO-PRODUITS (84) Designated Contracting States: (72) Inventor: HELBERG, Lisa Edith AL AT BE BG CH CY CZ DE DK EE ES FI FR GB Middletown, Delaware 19709 (US) GR HR HU IE IS IT LI LT LU LV MC MK MT NL NO PL PT RO RS SE SI SK SM TR (74) Representative: Towler, Philip Dean Dehns (30) Priority: 23.02.2011 US 201161445792 P St Bride’s House 23.02.2011 US 201161445801 P 10 Salisbury Square London (43) Date of publication of application: EC4Y 8JD (GB) 01.01.2014 Bulletin 2014/01 (56) References cited: (73) Proprietor: E.I. Du Pont De Nemours and Company US-A- 2 416 191 US-A- 4 783 324 Wilmington, Delaware 19898 (US) US-A1- 2002 179 427 Note: Within nine months of the publication of the mention of the grant of the European patent in the European Patent Bulletin, any person may give notice to the European Patent Office of opposition to that patent, in accordance with the Implementing Regulations.
    [Show full text]
  • 2020 Emergency Response Guidebook
    2020 A guidebook intended for use by first responders A guidebook intended for use by first responders during the initial phase of a transportation incident during the initial phase of a transportation incident involving hazardous materials/dangerous goods involving hazardous materials/dangerous goods EMERGENCY RESPONSE GUIDEBOOK THIS DOCUMENT SHOULD NOT BE USED TO DETERMINE COMPLIANCE WITH THE HAZARDOUS MATERIALS/ DANGEROUS GOODS REGULATIONS OR 2020 TO CREATE WORKER SAFETY DOCUMENTS EMERGENCY RESPONSE FOR SPECIFIC CHEMICALS GUIDEBOOK NOT FOR SALE This document is intended for distribution free of charge to Public Safety Organizations by the US Department of Transportation and Transport Canada. This copy may not be resold by commercial distributors. https://www.phmsa.dot.gov/hazmat https://www.tc.gc.ca/TDG http://www.sct.gob.mx SHIPPING PAPERS (DOCUMENTS) 24-HOUR EMERGENCY RESPONSE TELEPHONE NUMBERS For the purpose of this guidebook, shipping documents and shipping papers are synonymous. CANADA Shipping papers provide vital information regarding the hazardous materials/dangerous goods to 1. CANUTEC initiate protective actions. A consolidated version of the information found on shipping papers may 1-888-CANUTEC (226-8832) or 613-996-6666 * be found as follows: *666 (STAR 666) cellular (in Canada only) • Road – kept in the cab of a motor vehicle • Rail – kept in possession of a crew member UNITED STATES • Aviation – kept in possession of the pilot or aircraft employees • Marine – kept in a holder on the bridge of a vessel 1. CHEMTREC 1-800-424-9300 Information provided: (in the U.S., Canada and the U.S. Virgin Islands) • 4-digit identification number, UN or NA (go to yellow pages) For calls originating elsewhere: 703-527-3887 * • Proper shipping name (go to blue pages) • Hazard class or division number of material 2.
    [Show full text]
  • Thin Films for Smart Windows: Synthesis of Temperature-Responsive Vanadium Oxide for Energy-Efficient Glazing Applications
    Thin films for Smart Windows: Synthesis of Temperature-Responsive Vanadium Oxide for Energy-Efficient Glazing Applications Delphine Malardé A thesis submitted to University College London in partial fulfilment of the requirements for the degree of Doctor of Philosophy Department of Chemistry University College London 2019 Declaration ‘I, Delphine Malardé, confirm that the work presented in this thesis is my own. Where information has been derived from other sources, I confirm that this has been indicated in the thesis.' Delphine Malardé 2 Abstract The material presented in this thesis highlights different ways of producing temperature-responsive monoclinic VO2 [VO2(M)] for energy-efficient glazing applications, and the improvement of their thermochromic properties. VO2(M) has been widely studied due to its specific thermochromic properties, which make it a promising material to use in home and commercial façade glazing for reducing energy consumptions. VO2(M) thin films were deposited on glass substrate using atmospheric chemical vapour deposition (APCVD) - a well-known deposition process commonly used in industry. The thermochromic properties of the films were optimised, which resulted in a doubling of the visible light transmittance (TLUM) and a fivefold increase in the solar modulation efficiency (ΔTSOL). Further improvements of the thermochromic properties were carried out by the synthesis of VO2-based multilayers. Aerosol-assisted chemical vapour deposition (AACVD) was also used to produce VO2(M) thin films from a newly produced vanadium alkoxide precursor. Furthermore, this precursor showed to be ideal for the formation of V2O3 films with bixbyite structure, which had interesting gas sensing properties. This is the first time that bixbyite-type V2O3 has been synthesised as thin films using AACVD.
    [Show full text]
  • United States Patent Office Patented Sept
    3,467,637 United States Patent Office Patented Sept. 16, 1969 1. 2 diene (hereinafter called “bicycloheptadiene'). The reac 3,467,637 tion is carried out using a transition metal catalyst of the LOW MOLECULAR WEIGHT OLEFIN INTER Ziegler type. POLYMERS PREPARED IN THE PRESENCE OF The process described and the copolymers produced in BICYCLO2.2.1]HEPTA-2,5-DIENE Paul J. Prucna, Cheswick, Pa., assignor to PPG Indus the above manner have several distinguishing and ad tries, Inc., a corporation of Pennsylvania Vantageous characteristics. These include: No Drawing. Filled June 1, 1965, Ser. No. 460,551 (a) The process produces low molecular weight co int. C. C08f 15/40, 1/42 s polymer in good yields using easily practised reaction U.S. C. 260-80,78 8 Claims conditions; (b) Varying ratios of ethylene to the other monoolefin O can be employed, permitting variation in product struc ture and properties; ABSTRACT OF THE DISCLOSURE (c) The products are essentially linear and homogene This invention relates to low molecular weight poly ous in structure; mers of ethylene and other alpha monoolefins produced 5 (d) The copolymers are readily dissolved in common by reacting said monomers in the presence of a Ziegler organic Solvents, this being true even with copolymers catalyst and small amounts of bicyclo[2.2.1]hepta-2,5- containing low proportions (e.g., below 20 percent) of diene. The copolymers are useful inter alia in coatings, propylene or other comonomer, whereas ordinarily such adhesives and as tackifying resins. copolymers are quite crystalline and insoluble; and 20 (e) The copolymers are stable and have good aging Stacteristics, attributable to their saturated linear back Oe, This invention relates to low molecular weight co The preferred comonomer with ethylene is propylene, polymers of ethylene and other monoolefins, and, more but other terminal monoolefins such as butylene or iso particularly, to such copolymers produced in the presence 25 butylene can also be utilized.
    [Show full text]
  • Toxicological Review of Vanadium Pentoxide (V2o5)
    DRAFT – DO NOT CITE OR QUOTE EPA/635/R-11/004A www.epa.gov/iris TOXICOLOGICAL REVIEW OF VANADIUM PENTOXIDE (V2O5) (CAS No. 1314-62-1) In Support of Summary Information on the Integrated Risk Information System (IRIS) September 2011 NOTICE This document is an External Review draft. This information is distributed solely for the purpose of pre-dissemination peer review under applicable information quality guidelines. It has not been formally disseminated by EPA. It does not represent and should not be construed to represent any Agency determination or policy. It is being circulated for review of its technical accuracy and science policy implications. U.S. Environmental Protection Agency Washington, DC. DISCLAIMER This document is a preliminary draft for review purposes only. This information is distributed solely for the purpose of pre-dissemination peer review under applicable information quality guidelines. It has not been formally disseminated by EPA. It does not represent and should not be construed to represent any Agency determination or policy. Mention of trade names or commercial products does not constitute endorsement or recommendation for use. This document is a draft for review purposes only and does not constitute Agency policy. ii DRAFT – DO NOT CITE OR QUOTE CONTENTS – TOXICOLOGICAL REVIEW OF VANADIUM PENTOXIDE (CAS No. 1314-62-1) LIST OF TABLES ......................................................................................................................... vi LIST OF FIGURES ....................................................................................................................
    [Show full text]
  • Dielectric Constant Chart
    Dielectric Constants of Common Materials DIELECTRIC MATERIALS DEG. F CONSTANT ABS RESIN, LUMP 2.4-4.1 ABS RESIN, PELLET 1.5-2.5 ACENAPHTHENE 70 3 ACETAL 70 3.6 ACETAL BROMIDE 16.5 ACETAL DOXIME 68 3.4 ACETALDEHYDE 41 21.8 ACETAMIDE 68 4 ACETAMIDE 180 59 ACETAMIDE 41 ACETANILIDE 71 2.9 ACETIC ACID 68 6.2 ACETIC ACID (36 DEGREES F) 36 4.1 ACETIC ANHYDRIDE 66 21 ACETONE 77 20.7 ACETONE 127 17.7 ACETONE 32 1.0159 ACETONITRILE 70 37.5 ACETOPHENONE 75 17.3 ACETOXIME 24 3 ACETYL ACETONE 68 23.1 ACETYL BROMIDE 68 16.5 ACETYL CHLORIDE 68 15.8 ACETYLE ACETONE 68 25 ACETYLENE 32 1.0217 ACETYLMETHYL HEXYL KETONE 66 27.9 ACRYLIC RESIN 2.7 - 4.5 ACTEAL 21 3.6 ACTETAMIDE 4 AIR 1 AIR (DRY) 68 1.000536 ALCOHOL, INDUSTRIAL 16-31 ALKYD RESIN 3.5-5 ALLYL ALCOHOL 58 22 ALLYL BROMIDE 66 7 ALLYL CHLORIDE 68 8.2 ALLYL IODIDE 66 6.1 ALLYL ISOTHIOCYANATE 64 17.2 ALLYL RESIN (CAST) 3.6 - 4.5 ALUMINA 9.3-11.5 ALUMINA 4.5 ALUMINA CHINA 3.1-3.9 ALUMINUM BROMIDE 212 3.4 ALUMINUM FLUORIDE 2.2 ALUMINUM HYDROXIDE 2.2 ALUMINUM OLEATE 68 2.4 1 Dielectric Constants of Common Materials DIELECTRIC MATERIALS DEG. F CONSTANT ALUMINUM PHOSPHATE 6 ALUMINUM POWDER 1.6-1.8 AMBER 2.8-2.9 AMINOALKYD RESIN 3.9-4.2 AMMONIA -74 25 AMMONIA -30 22 AMMONIA 40 18.9 AMMONIA 69 16.5 AMMONIA (GAS?) 32 1.0072 AMMONIUM BROMIDE 7.2 AMMONIUM CHLORIDE 7 AMYL ACETATE 68 5 AMYL ALCOHOL -180 35.5 AMYL ALCOHOL 68 15.8 AMYL ALCOHOL 140 11.2 AMYL BENZOATE 68 5.1 AMYL BROMIDE 50 6.3 AMYL CHLORIDE 52 6.6 AMYL ETHER 60 3.1 AMYL FORMATE 66 5.7 AMYL IODIDE 62 6.9 AMYL NITRATE 62 9.1 AMYL THIOCYANATE 68 17.4 AMYLAMINE 72 4.6 AMYLENE 70 2 AMYLENE BROMIDE 58 5.6 AMYLENETETRARARBOXYLATE 66 4.4 AMYLMERCAPTAN 68 4.7 ANILINE 32 7.8 ANILINE 68 7.3 ANILINE 212 5.5 ANILINE FORMALDEHYDE RESIN 3.5 - 3.6 ANILINE RESIN 3.4-3.8 ANISALDEHYDE 68 15.8 ANISALDOXINE 145 9.2 ANISOLE 68 4.3 ANITMONY TRICHLORIDE 5.3 ANTIMONY PENTACHLORIDE 68 3.2 ANTIMONY TRIBROMIDE 212 20.9 ANTIMONY TRICHLORIDE 166 33 ANTIMONY TRICHLORIDE 5.3 ANTIMONY TRICODIDE 347 13.9 APATITE 7.4 2 Dielectric Constants of Common Materials DIELECTRIC MATERIALS DEG.
    [Show full text]
  • Hazardous Waste List (California Code of Regulations, Title 22 Section 66261.126)
    Hazardous Waste List (California Code of Regulations, Title 22 Section 66261.126) Appendix X - List of Chemical Names and Common Names for Hazardous Wastes and Hazardous Materials (a) This subdivision sets forth a list of chemicals which create a presumption that a waste is a hazardous waste. If a waste consists of or contains a chemical listed in this subdivision, the waste is presumed to be a hazardous waste Environmental Regulations of CALIFORNIA unless it is determined that the waste is not a hazardous waste pursuant to the procedures set forth in section 66262.11. The hazardous characteristics which serve as a basis for listing the chemicals are indicated in the list as follows: (X) toxic (C) corrosive (I) ignitable (R) reactive * =Extremely Hazardous A chemical denoted with an asterisk is presumed to be an extremely hazardous waste unless it does not exhibit any of the criteria set forth in section 66261.110 and section 66261.113. Trademark chemical names are indicated by all capital letters. 1. Acetaldehyde (X,I) 2. Acetic acid (X,C,I) 3. Acetone, Propanone (I) 4. *Acetone cyanohydrin (X) 5. Acetonitrile (X,I) 6. *2-Acetylaminofluorene, 2-AAF (X) 7. Acetyl benzoyl peroxide (X,I,R) 8. *Acetyl chloride (X,C,R) 9. Acetyl peroxide (X,I,R) 10. Acridine (X) 11. *Acrolein, Aqualin (X,I) 12. *Acrylonitrile (X,I) 13. *Adiponitrile (X) 14. *Aldrin; 1,2,3,4,10,10-Hexachloro-1,4,4a,5,8,8a-hexahydro-1,4,5,8-endo-exodimethanonaphthlene (X) 15. *Alkyl aluminum chloride (C,I,R) 16. *Alkyl aluminum compounds (C,I,R) 17.
    [Show full text]