Vises

TRADITIONAL DRILL PRESS VISES These versatile drill press vises set the industry standard. • Base and bed parallel to 0.001" • All vises can be mounted on the base, either side or placed on end for general use • LIFETIME GUARANTEE Item # Description List Price SALE 9612152 Drill press vise, 1.5" $81.00 $73.00 9612251 Drill press vise, 2-7/16" $89.00 $80.00 9612253 Drill press vise, 2-7/16" $90.00 $81.00 9612301 Drill press vise, 3" $179.00 $161.00 9612401 Drill press vise, 4" $215.00 $193.00 9612602 Drill press vise, 6" $405.00 $364.00

LOW PROFILE DRILL PRESS VISES Incredibly tough, compact vises with low overall height for tight-clearance applications. • Four slots for secure mounting to machine table • Base and bed parallel to 0.001" Item # Description List Price SALE 9612403 Low profile drill press vise, 4" $65.00 $51.00 9612601 Low profile drill press vise, 6" $148.00 $115.00 9612801 Low profile vise, 8" $225.00 $174.00

QUICK RELEASE VISES Quick-action mechanism for repetitive operations where the workpiece must be secured and released rapidly.

Item # Description List Price SALE 9612321 Quick action vise, 3" $53.00 $48.00 9612421 Quick action vise, 4" $170.00 $153.00 9612621 Quick action vise, 6" $185.00 $166.00 9612821 Quick action vise, 8" $270.00 $243.00

RAPID ACTING, EXTRA CAPACITY MACHINE VISES Our unique patented rapid action nut is ideal for repetitive operations where the workpiece must be secured and released rapidly. • Rapid acting clamp and un-clamp of any size workpiece • 4” & 6” Jaw widths • 8” & 10” jaw opening • Replaceable hardened and ground steel jaws with step • Jaws have horizontal & vertical groove for holding round parts • Made from 30,000 PSI tensile strength, fine grain cast iron • Four slots for secure mounting to machine table • Base and bed parallel to 0.001”

Item # Description List Price SALE 9612428 4" x 8" rapid acting, extra capacity machine vise $205.00 $184.00 9612628 6" x 10" rapid acting, extra capacity machine vise $352.00 $317.00

2 Vises

INDUSTRIAL ANGLE VISE WITH SWIVEL BASE • Angle hinge is graduated in 1° increments from 0 to 90° • Base and bed parallel to 0.004” - Jaw surface square to 0.002” • Angle vise without the swivel base has two 5/8” mounting lugs located on the front and back end of the vise for easy mounting • Swivel base provides complete 360° calibrated rotation and 5/8” keyway and two 5/8” bolt slots for locating and mounting on the machine table • LIFETIME GUARANTEE

Item # Description List Price SALE 9611405 Industrial style angle vise w/swivel base, 4" $199.00 $179.00 9611602 Industrial style angle vise w/swivel base, 6" $402.00 $362.00

STANDARD MILLING VISES These vises can be used on your machining centers as well as you basic manual machine tools. • Equipped with Dual Force anti-lift mechanism • Friction reducing needle bearings reduce clamping friction • Hardened jaw plates • Hardened vise bed • Semi-hard steel screw • Extra-large opening • 60,000 PSI ductile iron castings Item # Description List Price SALE 9626604 Standard Milling vise $595.00 $459.00

CROSS SLIDE VISE Makes workpiece positioning fast, easy and accurate. • Dials are graduated in 0.1 mm increments • Cross slide travel is 3-1/2" x 4" Item # Description List Price SALE 9630303 Cross vise, 3" $121.00 $109.00 9630601 Cross vise, 6" $235.00 $212.00 9630801 Cross vise, 8" $320.00 $288.00

RAPID INDEXER Palmgren’s useful two directional rapid indexer is a good alternative to a machine vise for holding round, irregular or square parts for milling and drilling operations. • 5" self-centering 3-jaw chuck – with two sets of jaws • Internal or external clamping • Can be mounting either horizontally or vertically • Table scale 1° for angular indexing • Graduated 360° with 24 rapid notches at 15° each • Locking handle • Optional tailstock – Item number 9634214

Item # Description List Price SALE 9634125 Rapid indexer with 5" - 3 jaw chuck $565.00 $470.00

3 Bench Vises

COMBINATION BENCH AND PIPE VISE Practically indesctrucible and are 70% stronger than the competitive u-shaped styles. • 65,000 PSI ductile castings • Replaceable jaws • 70% stronger than the competitive • 360° swivel base with dual lock downs u-shaped styles and 4 point mounting holes • Sealed construction • LIFETIME WARRANTY • Straight line pull power tunnel design • Precision fit slide bar to 0.003"

Item # Description List Price SALE 9629744 Comb. Bench & pipe vise, 4" $245.00 $220.00 9629746 9629745 Comb. Bench & pipe vise, 5" $320.00 $288.00 9629746 Comb. Bench & pipe vise, 6" $395.00 $355.00 9629748 Comb. Bench & pipe vise, 8" $580.00 $520.00

MULTI-JAW ROTATING BENCH VISE Probably the most versatile vise you will ever own. • The jaws rotates 360° and locks in any position • Replaceable hardened steel jaws

SALE Item # Description List Price 9629503 Multi-jaw bench vise, 5" $280.00 $252.00

Bench Vises Accessories

PAN AND BOX BRAKE ATTACHMENT For box, pan and reverse bending of sheet metal applications. • Designed for use with a bench vise the bending jaw lever handle delivers safe, easy movement • The unit is equipped with easily removable fingers that permit angle, SALE channel, box and other complex bending operations • Use with any bench vise that has 4" / 5" / 6" / 8" wide jaws $220.00

Item # Description List Price 9629611 Pan & Box Brake Attachment $244.00

SLIP ROLL ATTACHMENT Slip roll machine designed for use with a bench vise will roll sheet metal and wire. • Large adjusting screws and scales for positioning and lifting the rollers to adjust for material thickness • Use with any bench vise that has 4" / 5" / 6" / 8" wide jaws

Item # Description List Price SALE 9629612 Slip Roll Attachment $260.00 $234.00

4 Regular Duty Square Throat C-Clamps

• Innovative spring tempered steel frames • Both black-oxide or anti-splatter copper • Through hardened steel spindles provide with square throat and extra throat depth plated spindles resist wear and tear while greater loading capabilities and longer designs. impeding rust service life • LIFETIME GUARANTEE

9629114 9629134

REGULAR DUTY DEEP THROAT REGULAR DUTY SQUARE THROAT C-CLAMPS C-CLAMPS Item # Description Throat Depth List Price SALE Item # Description Throat Depth List Price SALE 9629112 0-2" 2" $31.00 $28.00 9629133 0-3" 3" $38.00 $34.00 9629113 0-3" 2" $35.00 $31.00 9629134 0-4" 4" $49.00 $44.00 9629114 0-4" 2-3/8" $46.00 $41.00 9629136 0-6" 6" $82.00 $73.00 9629116 0-6" 3" $58.00 $52.00 9629138 0-8" 8" $115.00 $103.00 9629118 0-8" 3-1/2" $77.00 $69.00 9629140 0-10" 10" $141.00 $127.00 9629120 0-10" 4" $114.00 $103.00 9629122 2-12" 5" $95.00 $86.00 9629124 2-14" 6" $128.00 $115.00 9629126 2-16" 7" $155.00 $139.00

9629224

9629154

REGULAR DUTY EXTRA DEEP THROAT REGULAR DUTY EXTRA DEEP THROAT C-CLAMPS COPPER SPINDLES C-CLAMPS Item # Description Throat Depth List Price SALE Item # Description Throat Depth List Price SALE 9629222 0-2" 4" $36.00 $32.00 9629152 0-2" 2" $34.00 $30.00 9629223 0-3" 5" $41.00 $37.00 9629153 0-3" 2" $39.00 $35.00 9629224 0-4" 6-1/4" $53.00 $48.00 9629154 0-4" 2-3/8" $51.00 $46.00 9629226 0-6" 9-7/8" $99.00 $89.00 9629156 0-6" 3" $64.00 $57.00 9629228 0-8" 13-3/4" $142.00 $128.00 9629158 0-8" 3-1/2" $86.00 $77.00 9629230 0-10" 15-3/4" $174.00 $156.00 9629160 0-10" 4" $127.00 $114.00 9629162 2-12" 5" $106.00 $95.00 9629164 2-14" 6" $142.00 $128.00 9629166 2-16" 7" $172.00 $155.00

9629234 save

REGULAR DUTY EXTRA DEEP THROAT more12 Buy COPPER SPINDLES C-CLAMPS and get Item # Description Throat Depth List Price SALE 9629233 0-3" 5" $46.00 $41.00 TOOL BAG free 9629234 0-4" 6-1/4" $59.00 $53.00 a $25.00 value 9629236 0-6" 9-7/8" $110.00 $99.00 9629238 0-8" 13-3/4" $158.00 $142.00 Buy any 12 C-Clamps, L-Clamps or 9629239 0-10" 15-3/4" $193.00 Cantilever Clamps and get a free tool bag $174.00 item # 92315

5 Regular Duty Square Throat L-Clamps

• Innovative spring tempered and hardened • Through hardened steel spindles provide • Replaceable swivel pads steel frames optimizes high static stress greater loading capabilities and longer • One clamp accommodates a wide variety loadings service life of sizes and shapes of workpieces • Dropped forged sliding clamping arm for • Black-oxide and anti-splatter copper • Lifetime guarantee against breakage added strength and durability plated spindles that resist wear while impeding rust

STANDARD DUTY L-CLAMPS • Black-oxide plated save spindles that resist wear while impeding rust 9629312 more12 Buy and get Item # Description List Price SALE TOOL BAG free 9629304 0-4" $18.00 $16.00 a $25.00 value 9629306 0-6" $22.00 $20.00 9629308 0-8" $32.00 $29.00 Buy any 12 C-Clamps, L-Clamps or Cantilever Clamps and get a free tool bag 9629310 0-10" $38.00 $34.00 item # 92315 9629312 0-12" $48.00 $43.00 9629316 0-16" $54.00 $49.00

HEAVY DUTY COPPER SPINDLE L-CLAMPS • Anti-splatter copper plated SUPER DUTY spindles that resist wear L-CLAMPS while impeding rust 9629412 • Anti-splatter copper plated spindles that resist wear 9629432 while impeding rust Item # Description List Price SALE Item # Description List Price SALE 9629408 0-8" $68.00 $61.00 9629410 0-10" $73.00 $66.00 9629432 0-12" $150.00 $135.00 9629412 0-12" $80.00 $72.00 9629434 0-16" $170.00 $153.00 9629416 0-16" $98.00 $88.00 9629436 0-20" $185.00 $166.00 9629420 0-20" $112.00 $100.00 9629438 0-24" $197.00 $177.00 9629424 0-24" $140.00 $126.00

9629491 9629492 9629493 9629494 9629496

CANTILEVER CLAMPS • Provides the best features of C-clamps and parallel clamps • The clamping handle is always outside the work area Item # Description List Price SALE • Body plates are made from Chrome-Molybdenum alloy steel 9629491 1" $21.50 $19.00 • Floating jaws always stay parallel to the workpiece 9629492 2" $27.20 $24.00 • Free floating jaws adjust to unparalleled surfaces 9629493 3" $43.00 $39.00 • Will not walk off-center when pressure is applied against the jaw 9629494 4.5" $57.00 $51.00 because there is no unsupported screw or loose pad 9629496 6" $90.00 $81.00 • Black-oxide plated spindles resist wear and impede rust

6 Arbor Presses

9661301 9661401 9661201

9661051 9661101

ARBOR PRESSES Item # Description List Price SALE • Sturdy, cast-iron construction 9661051 Arbor Press, 0.5 ton $74.00 $62.00 • Rugged steel ram is driven by a machined pinion 9661101 Arbor Press, 1 ton $109.00 $91.00 • Base drilled for mounting on a bench or pedestal 9661201 Arbor Press, 2 ton $225.00 $188.00 • Includes three piece bit set - 1 pointed, 1 round and 1 square end bit, and a removable steel anvil 9661301 Arbor Press, 3 ton $351.00 $293.00 • The base is machined to hold the three bit set 9661401 Arbor Press, 4 ton $697.00 $582.00

ARBOR PRESS STAND RATCHETING ARBOR PRESS The Arbor Press Stand provides a sturdy base • Sturdy, cast-iron construction and optimal height for easy operation. It has • Rugged steel ram is driven by a a slot on the top for pieces which need to machined pinion extend below the base of the press table. • Base drilled for mounting on a bench or pedestal • Stand comes with built-in cup for catching • Includes three piece bit set - 1 pointed, expressed pieces 1 round and 1 square end bit, and a • Base and top are cast iron with a body of removable steel anvil welded steel • The base is machine to hold the three bit set • Fits all 2, 3 and 4 ton presses

Item # Description List Price SALE Item # Description List Price SALE Arbor Press 9661302 Ratcheting Arbor Press, 3 ton $805.00 $673.00 9670103 $285.00 $245.00 Heavy Duty Work Stand

AIR OPERATED BENCH PRESS AIR OVER HYDRAULIC • Easy hook-up — just attach to your shop air C FRAME BENCH PRESSES supply • Heavy duty cast iron frame ensures • Heavy duty cast iron frame and t-slotted precision work base ensure precision work • Remote pressure adjustment easily sets • Air filter / regulator ensures clean and maximum pressure desired continuous air flow to press • Manual ram operation — rapid approach, • Easily adjusted ram speed, pressure power or pressing stroke, ram return all and stroke allow accurate control of ram adjustable permitting accurate control of movement ram movement • Easy change over to different tool and part • Standard ram end utilizes coupler with heights via height adjustment crank bored hole and two locking screws for easy and secure tool mounting

Item # Description List Price SALE Item # Description List Price SALE 9661600 Air Press - 400 lbs. $1,950.00 $1,630.00 9661606 10,000 lbs. $8,550.00 $7,145.00 9661602 Air Press - 1100 lbs. $2,625.00 $2,195.00 9661608 20,000 lbs. $9,704.00 $8,110.00 9661604 Air Press - 2500 lbs. $3,490.00 $2,915.00

7 Buffer

Effectively cleans, finishes, polishes and buffs a wide variety of materials. • Large diameter armature shaft with shielded bearings for smooth operation 9682063 • CSA approved OSHA compliant

Item # Description List Price SALE 9682063 6" 1/3HP 115/230V Buffer $138.00 $124.00 9682083 8" 3/4HP 115/230V Buffer $215.00 $193.00 9682083

Finishing • Heavy duty capacitor motors that supply the extra current required during the start- up and operation under load • Extended wheel-to-wheel clearance which allows longer items to be ground easily • Dynamically balanced rotors and sealed bearings to minimize vibration and ensure smooth running • Large adjustable tool rests for safe, efficient tilt and angle grinding • Adjustable safety eye shields, and spark guards easily positioned with hurricane bolts 9682062 • Exclusive single port dust collection system, on selected models • CSA approved OSHA compliant

9682071 Item # Description List Price SALE 9682061 6" 1/3HP 115/230V grinder, no dust collection $110.00 $87.00 SALE 9682062 6" 1/3HP 115/230V grinder w/dust collection $126.00 $120.00 9682071 7" 1/2HP 115/230V grinder w/dust collection $190.00 $171.00 $229.00 9682081 8" 3/4HP 115/230V grinder w/dust collection $220.00 $198.00

9682081 9682082 8" 3/4HP 220/380V, 3PH grinder w/dust collection $220.00 $198.00 9682101 10" 1HP 115/230V grinder w/dust collection $445.00 $400.00 9682102 10" 1HP 220/380V, 3PH grinder w/dust collection $445.00 $400.00

9682101

12" HEAVY DUTY BENCH GRINDERS • 12˝ model comes standard with pedestal floor stand

Item # Description List Price SALE 9682121 12" 2HP 220V, 1PH grinder w/pedestal stand & dust collection $1,020.00 $918.00 9682077 12" 3HP 230V, 3PH grinder w/pedestal stand & dust collection $1,455.00 $1,164.00 9682121

Finishing

• Industrial grade capacitor motors that supply the extra current required during the start-up and operation under load • Dynamically balanced rotors and sealed bearings to minimize vibration and ensure smooth running • Extended wheel-to-wheel clearance which allows longer items to be ground and finished easily • Large adjustable tool rests easily adjusted with hurricane bolts for safe, accurate grinding • Comes with three tool rests – (2) standard flat top and (1) v-grooved top for sharpening drill bits 9682075 with 118 degree drill point angle • Adjustable spark guards and safety eye shields – easily positioned with hurricane bolts • 36 and 120 grit grinding wheels • Exclusive single port dust collection system with coated steel hose • 6” & 8” models come standard with wheel dresser • CSA/US approved and OSHA compliant

Item # Description List Price SALE 9682073 9682072 6" 1/2HP 115/230V grinder w/dust collection $225.00 $202.50 9682073 8" 1HP 115/230V grinder w/dust collection $415.00 $373.50 9682074 8" 1HP 230/400V, 3PH grinder w/dust collection $430.00 $387.00 9682075 10" 1HP 115/230V grinder w/dust collection $750.00 $675.00 9682076 10" 1HP 220/380V, 3PH grinder w/dust collection $780.00 $702.00 v-grooved tool rest

8 Finishing

COMBINATION BENCH & BELT GRINDER SALE Palmgren combined two machines into one. Ideal for grinding, deburring, polishing and finishing all types of parts, on any type of material. $517.00 • Adjustable work rests • Dust collection ports • Belt is adjustable in either the vertical or horizontal position or any position in-between • OSHA compliant

Item # Description List Price 9682088 Belt & Bench Grinder Combo $575.00

SALE SALE $508.00 SALE $373.00 $229.00

9682401 9682402 9682404 BELT GRINDERS These versatile machines grind, sand, finish, polish, deburr and Item # Description List Price contour all types of parts on any type of material. Built with a powerful capacitor motor for all day use. 9682401 Belt Grinder 1in. $255.00 • Belt is adjustable for use in either the vertical or horizontal position 9682402 Belt Grinder 2in. $415.00 or any position in-between 9682404 Belt Grinder 4in. $564.00 • Simple belt tensioning and adjustment • Full belt guard • Dust collection port • OSHA compliant

12˝ DISC ABRASIVE FINISHING MACHINE Palmgren’s 12˝ disc abrasive finishing machine is ideal for finishing outside radius of metal, wood, plastics and composite materials. SALE • Direct drive • 45° tilting table • Miter gauge • Dust collection port $236.00

Item # Description List Price 9681312 12" Disc sander, 120V, 1 PH $295.00

Palmgren’s direct drive combination belt and disc finishing machines grind, SALE sand, finish, polish, deburr and contour all types of materials and parts. • Belt operates in the horizontal or vertical position $198.00 • Both the belt and disc come with a tilting work table.

COMBINATION 2 X 6" BELT & DISC FINISHING MACHINE

Item # Description List Price 9681061 2" x 42" Belt, 6" Disc bench finishing machine $220.00

9 Finishing

SALE $583.00

COMBINATION 6 X 9" BELT & DISC FINISHING MACHINE • 6 x 48˝ belt with a 9˝ disc floor model with open stand Item # Description List Price 9681093 6" x 48" Belt, 9" Disc bench finishing machine $648.00

SALE COMBINATION BELT & DISC FINISHING MACHINES Palmgren’s combination belt and disc finishing machines are versatile and $815.00 economical workshop tools. Dust collection shrouds for both the belt and the disc and the unit comes complete with a fully enclosed steel floor stand to protect the motor from dust. • Belt operates in the horizontal or vertical position • Both the belt and disc come with a cast iron tilting work table

Item # Description List Price SALE 9681110 6" x 48" Belt, 10" Disc floor finishing machine $960.00 $815.00 9681112 6" x 48" Belt, 12" Disc floor finishing machine $1,650.00 $1,390.00

CUTTING YOU A GREsalesAT DE eventAL SALE $109.00 SALE $99.00 MATERIAL SUPPORT STANDS The Palmgren material support stands are made of heavy duty cast iron and steel for handling heavy loads for stock up to 2,000 pounds. A clamping mechanism on the column allows for quick and easy height adjustments. Locking screws provide added safety.

9670181 Item # Description List Price 9670141 Horizontal roller material support pedestal stand,14" $158.00 9670181 V-roller material support pedestal stand, 18" $164.00 9670141

10 Finishing Accessories

HEAVY DUTY TOOL STAND SALE Item # 9670101 - Heavy duty cast iron tool stand fits all bench grinders, buffers and belt grinders. $109.00 • Multi-hole top for easy securing of finishing tool to stand Item # Description List Price • Quench pot. 9681093 6" x 48" Belt, 9" Disc bench finishing machine $648.00 Item # Description List Price 9670101 Bench grinder pedestal stand $122.00

Top viewed from above

CUTTING YOU A GREATsales DE eventAL

SALE BENCH GRINDER PEDESTAL AND DUST COLLECTION CABINET $604.00 Item # 9686000 - Cabinet design allows for bench and belts grinders to be securely mounted while only taking up a small SALE foot print of shop floor space. The front mounted hinged door is convenient for fast clean up. $109.00 The unit effectively removes hazardous material and dust particles away from the operator while recirculating clean air back into the shop resulting in a cleaner, safer work area. • Dust collection • Quench pot • Easy access hinged door for dust & particle removal • Spark arrestor • 30 micron filter bag • Replaceable HEPA filter

Item # Description List Price Shown with grinder 9686000 Grinder pedestal with built in dust collection $650.00 (grinder not included)

11 Sawing

BENCH MITER BAND SAW Palmgren’s professional bench top band saw comes with large cutting capacities and it has the power to deliver accurate, fast cuts. Easy to move and position where needed this lightweight bench unit is loaded with quality features. The miter head swivels and locks for fast, easy miter cutting. 9683306 • Ergonomic hand grip & switch • Electronic variable speed direct drive motor • Adjustable tension feed control • Work stop SALE $929.00

Item # Description List Price SALE 9683306 Miter band saw, 6" $999.00 $929.00 9670106 Optional floor stand for bench band saw $208.00 $193.00

CUTTING YOU 9670106 A GREsalesAT DE eventAL

8 X 12" HORIZONTAL BAND SAW • 3 Jaw quick acting vise for fast miter cutting set ups. Palmgren’s 8 x 12˝ horizontal band saw is built to deliver • Hydraulic feed control fast, accurate cutting on all types of materials. Cast iron • Adjustable blade guides and rigid steel construction of the saw head and base • Chip blade brush provides full blade support and eliminates vibration and • Coolant system with adjustable coolant flow deflection. The combination of a direct drive train and • Wheels that roll easy for positioning hydraulic feed system delivers consistent accurate cuts and longer blade life. • Longer blade and larger blade wheels provide a greater radius to reduce stress on the blade SALE • Rugged direct drive gear box - no belts to set or change $1,889.00

DIRECT MOTOR DRIVE THREE JAW VISE The all gear drive power train For standard cut off applications is directly connected to the the ridged design makes square motor to deliver full power at cuts easy. When miter cuts any speed, driving the blade are required no wrenches or at nearly 100% of the available readjusting of the vise jaws are horsepower. The end result needed to set-up the vise. The is higher efficiency, consistent angle can be pre-adjusted by speed to the blade resulting in simply loosening a handle. This longer blade life. innovative vise design is simple to use and adjusts in seconds.

Item # Description List Price 9683308 8"x12" Direct drive horizontal band saw $2,099.00

12 Sawing

10 X 18" HORIZONTAL MITER BAND SAW 60° Flexibility and value describe Palmgren’s double miter band saw. The workpiece remains fixed while the saw head swivels left or right to cut any angle from 0 to 60° and locks into Swivel place with a quick acting locking lever. 45°

• Conveniently located operator control panel that can be used from either the front or back of the band saw • Variable speed drive • Top load blade for faster and easier blade changes • Adjustable blade guides with 6 contact points using cam follower bearings and carbide pads for straight, accurate cuts • Counter balanced hydraulic feed system for cutting stock at variable rates SALE • Chip blade brush • Coolant system with adjustable flow through $6,839.00 the guides • Adjustable work stop • Miters 60° to the left and 45° to the right • Rapid acting vise

Item # Description List Price 9683310 10"x18" Miter band saw $7,599.00

CUTTING YOU A GREsalesAT DE eventAL

13 X 19" HORIZONTAL MITER BAND SAW 60° Palmgren’s 13 x 19˝ horizontal miter band saw provides flexibility and value for those applications Swivel that require cut off of medium to large work pieces or parts that have many angle cuts. The work 45° piece remains fixed while the saw head swivels left or right to cut any angle from 0 to 60° fast and easily. Heavy duty cast iron and steel construction provides full blade support while eliminating vibration and deflection. This saw is ideal for short run production work as well as for shops that do a considerable amount of utility cutting.

• Conveniently located operator control panel that can be used from either the front or back of the band saw • Variable speed drive to maximize the performance of today’s bi-metal saw blades • Top load blade for faster and easier blade changes • Adjustable blade guides with 6 contact points using cam follower bearings and carbide pads for straight, accurate cuts • Counter balanced hydraulic feed system for cutting stock at variable rates while insuring straight, smooth cuts • Chip blade brush • Coolant system with adjustable flow through the guides • Adjustable work stop • Miters 60° to the left and 45° to the right • Rapid acting vise SALE $8,955.00

Item # Description List Price 9683313 13"x19" Miter band saw $9,950.00

13 Sawing

15" AND 18" VERTICAL BAND SAWS • Chip blower • Extra wide speed range • 15" comes with one 1/2" - 14 TPI metal blade, and one 1/2" - 6 TPI wood blade • 18" comes with one 3/4" - 14 TPI metal blade, and one 3/4" - 6 TPI wood blade

SALE SALE $2,195.00 $1,875.00

9683118 9683115

Item # Description List Price SALE 9683115 Vertical wood/metal band saw, 15" floor model $2,021.00 $1,875.00 9683118 Vertical wood/metal band saw, 18" floor model $2,364.00 $2,195.00

CUTTING YOU A GREsalesAT DE eventAL

14 Drilling and Tapping

UNIVERSAL- TAP Palmgren’s Universal-Tap electric tapping machine is suitable for small, medium and large size taps. It utilizes a unique single articulating arm design that permits tapping as close as eight inches to the vertical mounting bracket. This feature provides a large work envelope even in confined work areas. The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease. • Articulating arm with 8" to 55" reach • Stationary bench bracket • Quick change tooling adaptor • Two-speed gear reducer with vari speed control to adjust torque speed to optimize the treading process • 115 volt, 1 phase high torque reversible electric motor • See page 54 for optional tap holders • Refer to page 51 for how to order

Item # Description List Price SALE 9680426 Universal Tapping machine 55" reach - 400 rpm $4,995.00 $4,495.00

QUICK TAP Palmgren’s Quick Tap pneumatic tapping machine is suitable for small to medium size taps. Parallel arm reach 37˝ max. / 4˝ min. • Stationary bench bracket • Vertical motor bracket • Quick change tooling adaptor/size 1 • High torque reversible air motor • Air preparation unit with lubricator, filter, regulator and pressure gauge

Item # Description List Price SALE 9680420 Quick-Tap Pneumatic Tapping machine 37" reach - 400 rpm $2,420.00 $2,178.00 9680421 Quick-Tap Pneumatic Tapping machine 37" reach - 700 rpm $2,420.00 $2,178.00

Optional Tap Holders

CUTTING YOU A GREsalesAT DE eventAL

SHOP TAP Palmgren’s Shop Tap pneumatic tapping machine is a medium duty general purpose machine suitable for tapping small to medium size holes. • Parallel arm reach 62" max. / 22.5" min. • Air preparation unit with lubricator, filter, • Stationary bench bracket regulator and pressure gauge • Quick change tooling adaptor/size 1 • Vertical motor bracket • High torque reversible air motor

Item # Description List Price SALE Optional Tap Holders 9680400 Shop-Tap Pneumatic Tapping machine 62" reach - 400 rpm $2,625.00 $2,362.00 9680401 Shop-Tap Pneumatic Tapping machine 62" reach - 700 rpm $2,625.00 $2,362.00

15 Drilling and Tapping

PRODUCTION TAP • Refer to page 51 for how to order Palmgren’s Production-Tap pneumatic tapping machine is • Parallel arm with 8" to 55" reach suitable for a wide range of general purpose to heavy duty • Stationary bench bracket tapping applications. The arm is equipped with lubricated for • Quick change tooling adaptor life bearings at all swivel points, provides weightless operation • Air preparation unit with lubricator, filter, regulator and over a wide area and permits the operator to bring the tap to pressure gauge the hole on very large and multi-level parts with ease. • High torque reversible air motor • See page 54 for optional tap holders

Optional Tap Holders

Optional Tap Holders

Item # Description List Price SALE 9680410 Production Tap Pneumatic Tapping machine 55" reach - 400 rpm $2,550.00 $2,295.00 9680411 Production Tap Pneumatic Tapping machine 55" reach - 700 rpm $2,550.00 $2,295.00 9680412 Production Tap Pneumatic Tapping machine 55" reach - 300 rpm $3,095.00 $2,785.00

CUTTING YOU A GREsalesAT DE eventAL

PNEUMATIC HAND TAPPER • 1/8" to 7/16" capacity in mild steel The clutch built into the tap holder ratchets when • Ergonomic comfort grip the tap bottoms, hits any interference or begins • Adjustable side handle to dull. Whether you have only a few holes or • Trigger reverse many to tap the Palmgren hand tapper can save • Quick change tooling adaptor you up to 90% of time as compared to tapping • Precision machined and hardened gear by hand. reduction • Refer to page 51 for how to order • High torque reversible air motor • See page 54 for Optional Tap Holder Listing

Item # Description List Price SALE 9680451 Pneumatic Hand Tapper - 150 rpm $550.00 $495.00

16 Drilling and Tapping

TORQUE DRIVE TAP HOLDERS

Item # Description List Price SALE The torque clutch allows the tap to stop turning Size 1 Adaptors when it becomes dull or encounters any 9680500 0-6 Tap holder w/clutch $89.00 $79.00 obstruction that might cause the tap to break. 9680501 8 Tap holder w/clutch $89.00 $79.00 Adjustable for all types of materials. The quick change tap holder allows you to change from 9680502 10 Tap holder w/clutch $89.00 $79.00 one size tap to another in 3 to 5 seconds. No 9680503 12 Tap holder w/clutch $89.00 $79.00 gears, head height or stops to change. 9680504 1/4” Tap holder w/clutch $89.00 $79.00 9680505 5/16” Tap holder w/clutch $89.00 $79.00 9680506 3/8” Tap holder w/clutch $89.00 $79.00 9680507 7/16” Tap holder w/clutch $89.00 $79.00 9680508 1/2” Tap holder w/clutch $89.00 $79.00 Size 2 Adaptors 9680550 Adaptor for size 2 9680530 5/16” Tap holder w/clutch $108.00 $97.00 to 1- fits size 2 quick change 9680531 3/8” Tap holder w/clutch $108.00 $97.00 adaptor and accepts all size 9680532 7/16” Tap holder w/clutch $108.00 $97.00 1 tap holders 9680533 1/2” Tap holder w/clutch $108.00 $97.00 9680534 9/16” Tap holder w/clutch $108.00 $97.00 9680535 5/8” Tap holder w/clutch $108.00 $97.00 9680536 11/16” Tap holder w/clutch $108.00 $97.00 9680537 3/4” Tap holder w/clutch $108.00 $97.00 9680538 13/16” Tap holder w/clutch $108.00 $97.00 Torque drive Tap adaptors change easily 9680539 7/8” Tap holder w/clutch $108.00 $97.00 tap holder by sliding chuck sleeve until 9680540 1” Tap holder w/clutch $108.00 $97.00 shown with tap adaptor is free 9680541 1/4” NPT Pipe tap holder w/clutch $108.00 $97.00 9680542 3/8” NPT Pipe tap holder w/clutch $108.00 $97.00 Adaptor for size 2 to 1- fits size 9680550 2 quick change adaptor and $149.00 $134.10 accepts all size 1 tap holders 9680516 Drill chuck with size 1 Drill Chuck w/Size 1 Quick Change Adaptor quick change adaptor

5/16” Drill chuck on size 1 quick 9680515 $175.00 $158.00 change adaptor

CUTTING YOU A GREsalesAT DE eventAL

17 Drilling and Tapping

9680158 9680177 9680209

HEAVY DUTY 16-SPEED FLOOR MODEL DRILL PRESSES Palmgren’s heavy duty 16-speed drill presses are designed • Precision ground t-slotted work table with coolant trough and built for drilling a wide array of materials. • Table tilts 45° right and left and rotates 360° around the column • Fully enclosed spindle for accurate drilling operations • Quick change vertical depth stop for accurate, repeatable feed • Maximum spindle run out of 0.0005˝ length • Extended quill/spindle travel ideal for deep hole applications • Heavy cast metal 3 spoke quill feed handle with ergonomic speed • LED readout of spindle speed and quill travel feed handle • Rack and pinion table raiser • Front mounted industrial paddle-type power switch • Includes chuck with key and arbor

Item # Description List Price SALE 9680158 15" 16- Speed Floor step pulley drill press $701.00 $665.00 9680177 17" 16- Speed Floor step pulley 1PH drill press $768.00 $730.00 9680178 17" 16- Speed Floor step pulley 3PH drill press $780.00 $741.00 9680209 20" 16- Speed Floor step pulley 1PH drill press $1,129.00 $1,073.00 9680210 20" 16- Speed Floor step pulley 3PH drill press $1,140.00 $1,083.00

Item # Description List Price SALE 9615035 Multi- purpose Swing Machine Away Guard $298.00 $268.00

CUTTING YOU A GREsalesAT DE eventAL

18 Drilling and Tapping

HEAVY DUTY 16-SPEED BENCH MODEL DRILL PRESS These Drill Presses have the weight and rigidity to maintain the built-in tight tolerances required for metalworking applications. The oversized, massive drill heads have widely spaced bearing surfaces that provide full quill support throughout its travel. A wider range of operation speeds for drilling both large and small holes. • Fully enclosed spindle for accurate drilling operations • Maximum spindle run out of 0.0005" • Extended quill/spindle travel ideal for deep hole applications SALE • LED readout of spindle speed • Rack and pinion table raiser $639.00 • Precision ground t-slotted work table with coolant trough • Table tilts 45° right and left and rotates 360° around the column • Quick change vertical depth stop for accurate, repeatable feed length 9680157 • Heavy cast metal 3 spoke quill feed handle with ergonomic speed feed handle • Front mounted industrial paddle-type power switch • Includes chuck with key and arbor

Item # Description List Price 9680157 15" 16- Speed Floor step pulley drill press $672.00

CUTTING YOU A GREsalesAT DE eventAL

38.5” BENCH RADIAL DRILL PRESS This versatile drilling machine is specially designed to handle a wide range of drilling and boring applications. Equipped with a sturdy hardened quill and spindle for added strength and wear. The drilling head is mounted on a precision ground way with adjustable bearings so it is easily and accurately moved along the radial arm. • Heavy duty high tensile strength cast iron frame, base, column and table • Fully enclosed spindle with spaced bearings for maximum spindle support and accurate drilling & boring operations • Maximum spindle run out 0.0005” • Extended quill/spindle travel for deep hole applications • Arm & drill head rotates 360 degrees around the column SALE • 5 speed step pulley drive train • Rack and pinion arm raiser $3,771.00 • Head lock to securely position drill head on radial arm • Precision ground T-slot base and box table • Drill chuck, key and arbor • Box table has t-slots machined on two sides and can be easily removed for machining in the larger base work area • Manual spinidle reversing switch is mounted on the front side of the drill head for convenient use for tapping applications

Item # Description List Price SALE 9680350 Radial Arm Drill Press with Table $3,970.00 $3,771.00 9680351 Radial Arm Drill Press Stand $459.00 $414.00

19 Turning Machines

Palmgren’s bench engine lathe delivers the precision, power and versatility to handle a wide range of turning operations normally found in much larger machines. Built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance.

7 X 12" BENCH LATHE Motor 3/4 HP / 115 V / 60HZ / 1PH SALE STANDARD FEATURES: • Machine tool spindle $1,238.00 • Dual P5 tapper roller bearings on spindle • Prismatic bed of solid aged cast iron – hardened • Feed lead screw is supported and runs on two bearings • 3 Jaw lathe chuck • 4 Way tool post • Safety lathe chuck and tool post guards • Centers • Chip tray and splash guard 9684500 Shown on optional floor stand Item # Description List Price SALE 9684500 7"x12" Bench engine lathe $1,375.00 $1,238.00 * 9684501 Steel floor stand for 9684500 7" lathe $295.00 free 9684502 Follow rest for 9684500 7" lathe $35.00 $31.00 9684503 Steady rest for 9684500 7" lathe $37.00 $33.00

save *Buy BENCH LATHE more and get the FLOOR STAND Item # 9684501 - a $295.00 value. Item 9684505 - a $450.00 value. free

ITEM #9684504 9 X 20˝ BENCH LATHE SALE Motor 1 HP / 115 V / 60HZ / 1PH $1,795.00 STANDARD FEATURES: • Machine tool spindle • Dual P5 tapper roller bearings on spindle • Prismatic bed of solid aged cast iron – hardened • Feed lead screw is supported and runs on two bearings • 3 Jaw lathe chuck • 4 Way tool post • Safety lathe chuck and tool post guards • Centers • Chip tray and splash guard

Item # Description List Price SALE 9684504 9"x20" Bench engine lathe $1,995.00 $1,795.00 9684504 Shown on optional floor stand * 9484505 Steel floor stand for 9684504 & 9684520 9" and combo lathes $450.00 free 9684506 Follow rest for 9684504 9" lathe $49.00 $44.00 9684507 Steady rest for 9684504 9" lathe $52.00 $47.00

20 Turning Machines

Palmgren’s combination 11" bench engine lathe and gear head mill delivers the precision, power and versatility to handle a wide range of turning, milling and drilling operations normally found in much larger machines.

SALE COMBINATION 11 X 27˝ BENCH LATHE & MILL LATHE $3,077.00 Motor 1 HP / 115 V / 60HZ / 1PH STANDARD FEATURES: • Dual P5 tapper roller bearings on spindle • Prismatic bed of solid aged cast iron – hardened • Fast easy feed speed and direction changes with front mounted selector handles • Feed gear box is constructed of helical steel gears running in an oil bath • Feed lead screw is supported and runs on two bearings • 3 Jaw lathe chuck • 4 Way tool post • Safety lathe chuck and tool post guards • Centers • Chip tray and splash guard

MILL • Electronic variable speed • All steel gear drive train • Built-in work light • Box column with hardened, ground and hand scraped ways • 2 MT machine tools spindle with draw bar Shown - Item #9684520 • Precision machine tool spindle with guaranteed concentricity with optional floor stand of .0005˝ at the spindle nose • Drill chuck and arbor

Item # Description List Price SALE 9684520 11"x27" Bench combination engine lathe & vari speed mill $3,414.00 $3,077.00 * 9484505 Steel floor stand for 9684504 & 9684520 9" and combo lathes $450.00 free 9680170 5 piece 2MT round collet set for 9684520 mill lathe combo $95.00 $85.00

OPTIONAL ACCESSORIES: CUTTING YOU Item# 9680170 - A GREAT DEAL No. 2 MT round collet chuck set, 5 collets SALE sales event 1/8" to 7/16" with wooden storage box $85.00

save *Buy COMBINATION BENCH LATHE and get the FLOOR STAND more Item # 9484505 - a $450.00 value. free

21 Milling Machines

GEAR HEAD MILLING MACHINE MOTOR VERTICAL SPINDLE 3 HP / 230 V / 60HZ / 1PH

Palmgren’s deluxe gear head milling machine delivers the precision, power and versatility to handle a wide range of machining operations normally performed in much larger and more expensive milling machines.

The all gear drive transmission delivers full power at any speed. A rigid box column with hardened, ground and hand SALE scraped dovetail ways provide accurate head positioning. $4,185.00 Precision machine tool spindle equipped with taper roller bearings and a guaranteed spindle concentricity of .0005".

The cross slide table is precision ground with T-slots, adjustable limit stops, scale and three satin metal adjusting hand wheels.

Our gear head mill comes with an automatic tapping mode.

STANDARD FEATURES: • Tapping cycle • Depth stop • Digital speed readout • Digital readout depth gauge • Draw bar • Way cover • R8 Spindle Taper

Item # Description List Price SALE 9680165 Milling machine, variable speed, 3HP, 230V, 1PH $4,650.00 $4,185.00 9670105 Heavy duty steel floor stand for 9680165 mill $786.00 $707.00

OPTIONAL ACCESSORIES: Item # 9670105 - Heavy duty steel floor stand made of heavy gage steel for added SALE stability. Comes with shelf and chip tray, easy access door for tool $707.00 storage and 4 holes for mounting to the floor.

CUTTING YOU A GRsalesEAT DE eventAL

22 Milling Machines

MILL / DRILL MACHINE

Our Mill / Drill machine offers maximum versatility and economy for your end milling, face milling, slotting, drilling and boring applications all in a single machine designed to bring a competitive advantage to the smaller job shop, model shop, fabrication shop and maintenance departments.

STANDARD FEATURES:

• Solid cast iron construction • Large, precision ground T-slotted machine table with adjustable feed stops • Hinged belt cover for faster speed changes • Heavy-duty tapered roller bearings support the spindle • Positive easy to read internal depth stop • Fine feed mechanism with graduated dial for accurate down feed movement • Easy to read dials • 360° head swivel • Comes standard with draw bar, work light, R8/J6 arbor, face mill cutter, R8/MT3 arbor, drill chuck and key and 6 piece R8 arbor set (1/8˝, 1/4˝, 3/8˝, 1/2˝, 5/8˝ & 3/4˝)

Item # Description List Price SALE 9680161 Milling machine, variable speed, 2HP, 230V, 1PH $2,499.00 $2,249.00 * 9670104 Heavy duty steel floor stand for 9680161 mill $350.00 free

save *Buy MILL/DRILL MACHINE and get the FLOOR STAND more Item # 9670104 - a $350.00 value. free

CUTTING YOU A GRsalesEAT DE eventAL

23 Prices subject to change without notice.