AUCTION POWDERED METAL COMPACTION PRESS FACILITY CLOSING Compacting Presses, Furnace Lines, Vacuum Furnace & Misc. Furnaces, Metal Powder Inventory, CNC & Conventional Machine Tools, CNC E.D.M.s, Grinders, Metallurgy Department, Q.C. & Measuring Equipment, Precision Machine Accessories, Shop Support Tools, Air Compressor, Forklifts, More

< DORST 100 T. 1998 POWDER METAL PRESS

CNC REBUILT 1997 MAZAK SUPER QUICKTURN 200MS INSPECTION CNC LATHE THURSDAY Wednesday December 8 DECEMBER 9 9:00 A.M. to At the Premises of 10:00 A.M. 4:00 P.M. & MAJOR POWDERED METAL PRESS Morning of Sale & TOOLROOM FACILITY BUYER’S PREMIUM: 12% ONSITE • 15% VIA WEBCAST 4912 Research Dr. NW, HUNTSVILLE, ALABAMA 35805 (See Directions on Back Page)

< ABBOTT BELT-TYPE SINTERING FURNACE

> VACUUM 1995 INDUSTRIES VACUUM FURNACE Read Terms and Conditions On-Site Bidding in Huntsville, Alabama or Bid Via Webcast at on Back Page of Brochure Sale Conducted By: Headquarters: 2901 W. Sam Houston Pkwy. N., Suite A-130 Houston, TX 77043 PHONE: (713) 691-4401 FAX: (713) 672-7905 Bob Braman AL Lic. #1403 • Ron Moore AL Lic. #1404 E-MAIL: [email protected] HOUSTON • DALLAS • ST. LOUIS WEBSITE: www.pmi-auction.com REBUILT 1997

BUSSMANN 400 T. POWDER CINCINNATI 200 T. POWDER DORST 100 T. POWDER DORST 100 T. POWDER METAL PRESS METAL PRESS METAL PRESS METAL PRESS

POWDER METAL PRESSES HYDRAULIC PRESSES BUSSMANN MDL. HPM-4005 HYDRAULIC, DORST MDL. TPAN-100 MECHANICAL, 100 T. GENERAL HYDRAULICS MDL. 410-D400-36 4-POST, 400 T. 400 T. pressing cap., 200 T. return cap. (upper cap., rebuilt 10/97 by Dorst, programmable cap., 36" x 56" bed size, 20" x 41" dist. btn. posts, approx. 20" ram), 330 T. pressing cap., 220 T. return cap. controls, powder hopper, Merlin light curtain, daylight, PLC controls, unitized hyd. system, S/N 66004-400. (lower ram), 23.6" upper ram stroke, 11.8" S/N 41674. HANNIFIN MDL. OG-F50A-18-4-1-SP C-FRAME, 50 T. cap., lower ram stroke, AB programmable controls, DORST MDL. TPAN-100 MECHANICAL, 100 T. 27" x 30" T-slotted bed, 18" stroke, 4" closed height, 22" day- light curtains, 39" x 39" bed size, S/N M3014. cap., Baldor adj. spd. drive, S/N 60157Z. light, guided ram, updated hydraulics, S/N A-41368. BUSSMANN MDL. HPM-2005 HYDRAULIC, BUSSMANN MDL. HPM-100 HYDRAULIC, 100 T. SINTERING FURNACES 220 T. pressing cap., 110 T. return cap. (upper pressing cap., 60 T. cap. return, 15.75" ram ABBOTT MDL. 3ZSCR-8-144HH3-2100 BELT TYPE, new ram), 204 T. pressing cap., 143 T. return cap. stroke, 5.91" lower ram stroke, Quick Panel PLC 1995, (3) heating zones, 8" max. width, 144" heating zone, (lower ram), 19.8" upper ram stroke, 7.9" lower control, light curtains, 25-1/2" x 25-1/2" bed 113 KW, 2,100 deg. F. max. temp., Barber Coleman digital ram stroke, AB programmable controls, light size, S/N M1874. controls, variable spd. belt, S/N AB182-10583-SI-1095. curtains, 31" x 31" bed size, S/N M-2727. STOKES MDL. 640 MECHANICAL, 19" x 21" SARGENT & WILBUR/ABBOTT MDL. 5Z-12-120PH2-168HH3- bed size, light curtains, S/N E93016. 2100 BELT TYPE, rebuilt 1994 by Abbott, 12" max. width, (5) CINCINNATI MDL. 200-C2-6 MECHANICAL, STOKES MDL. 542-3 DUAL PRESSURE ME- heating zones, 2,100 deg. max. temp, Yokogawa digital con- 200 T. pressing cap., 100 T. ejector cap., 8" ram trols, S/N AB1469-10375-MT-1194. stroke, 5" ram adj., 6" depth of fill, spds.: 10–30 CHANICAL, S/N E97190. SPM, Cincinnati sequence controller, ram DORST MDL. TPA-12, new 1990, 12 T. press- HARPER MDL. MM-83132-PTKA-29-FDD PUSHER TYPE, position indicator, tonnage meter, S/N 40481. ing cap., 2.56" fill depth, S/N 83488. (9) heating zones, 1,750 deg. F. max. temp., 132 KW, 1,050 deg. preheat furnace, Honeywell digital controls, return con- veyor, auto. cycle operation, S/N AP004MOD. VACUUM FURNACE VACUUM INDUSTRIES SERIES 3500, Mdl. 181236/1400, 18"W. x 12" ht. x 36" dp. chamber, 1,400 deg. F. max. temp., Stokes vacuum pump system, handling cart, Hunterdon trans- former, 118 KW output, S/N 42086BHH. INTERNAL QUENCH FURNACE SARGENT & WILBUR MDL. PIC140824Q, 14" x 8" opening, 2,370 deg. F. max. temp., 45 KW, oil quench tank, Honeywell digital controls, S/N 7608W4-F. 1995

ABBOTT BELT TYPE SINTERING FURNACE < HARPER PUSHER TYPE SINTERING FURNACE

VACUUM INDUSTRIES VACUUM FURNACE 1998 1998

4-AXIS

CNC CNC MAZAK SUPER QUICKTURN 200MS CNC LATHE CINCINNATI MILACRON SABRE 1000 CNC VERTICAL MACHINING CENTER

ELECTRIC BOX FURNACES CNC VERTICAL AUTOMATED INDUSTRIAL FURNACES, 18" ht. x 18"W. x 36" MACHINING CENTER dp. internal dims., 1,400 deg. F. max. temp., 18 KW, S/N 344. CINCINNATI MILACRON SABRE MDL. 1000 SARGENT & WILBUR MDL. BIR140824F, 14" x 8" ht. x 24" dp. 4-AXIS, new 1998, Accramatic 2100 CNC internal dims., 1,600 deg. F. max. temp., 15 KW, S/N 7608W3-F. control, 20" x 44" table, 40" X-axis travel, 20" Y-axis travel, 22" Z-axis travel, CAT-40, TRENT DOUBLE DOOR, 36"W. x 36" ht. x 32" dp. internal dims., 8,000 RPM, 21 pos. ATC, 15 HP motor, 1,200 deg. max. temp., 18 KW, S/N 898-914. W10-8 rotary table w/tailstock, S/N 7039- METALLURGICAL POWDERS AOB-98-0946. 100'S OF POUNDS OF NEW METALLURGICAL POWDER IN BARRELS, including titanium, copper, brass and iron. VERTICAL TURRET MILL BRIDGEPORT SERIES I, 9" x 48" table, TWIN SHELL BLENDER variable spd. head, spds.: 60–4,200 RPM, PATTERSON KELLEY, 10 cu. ft. cap., 225 lb./cu. ft. max. material 3 HP, pwr. feed table, chrome ways, shaping density, on fabricated stand, S/N 233451. attach., S/N 257648. FINISHING EQUIPMENT PERISHABLE TOOLING LOCTITE-TYPE VACUUM IMPREGNATION LINE, Mdl. 2212 vac- TAPER SHANK & STRAIGHT SHANK DRILLS; uum module, S/N 9278001, Mdl. 2212 3-station rinse module, ENDMILLS; COUNTERBORES; REAMERS; S/N 9278012, w/baskets and handling system. MILLING CUTTERS; CARBIDE TURNING TOOLS. TSUKISHIMN VIBRATORY FINISHING MACHINE, approx. 5 cu. HANNIFIN 50 T. C-FRAME ft., w/large assortment of media. HYDRAULIC PRESS CNC LATHE MAZAK MDL. SUPER QUICKTURN 200MS, new 1998, Mazatrol T-Plus CNC control, 20.67" swing, 14" max. turning dia., 2" bar cap., 26.18" max. turning length, main spndl. spds.: 35–5,000 RPM, 25 HP spndl. drive motor, 12 tool turret, 8" dia. 3-jaw chuck, sub-spndl. w/6" dia. 3-jaw chuck, live tooling, pre-setter, chip conveyor, collet nose (22J), S/N 137462. LATHES MORI SEIKI 21" X 40" MDL. MR-1000G GAP BED, 12" sw. over crosslide, spds.: 28–1,350 RPM, 2-1/8" spndl. hole, inch/metric thdng., 15" dia. 4-jaw chuck, steadyrest, S/N 3219. MYFORD, 7" x 15" cabinet base, spds.: 25–2,150 RPM, 1 HP, 4" dia. 3-jaw chuck, S/N N.A. DORST 12 T. POWDER METAL PRESS VIEW OF METALLURGICAL POWDER INVENTORY

PATTERSON KELLEY TWIN SHELL BLENDER LOCTITE-TYPE VACUUM IMPREGNATION LINE < 5-AXIS OKAMOTO 12" X 24" HYDRAULIC RECIPROCATING SURFACE GRINDER

> CHARMILLES ROBOFIL 310 CNC WIRE TYPE EDM CNC AUCTION THURSDAY, DECEMBER 9 • 10:00 A.M.

INSPECTION: Wednesday, December 8, 9:00 A.M. to 4:00 P.M. & Morning of Sale

SURFACE GRINDERS JIG GRINDERS OKAMOTO MDL. ACC-1224DX HYDRAULIC, 13.6" MOORE NO. 3, 11" x 24" table, (2) grinding spndls., ht. under wheel, 12" x 1-1/2" x 5" wheel size, 5 HP, slot grinding attach., Precise rotary table, S/N G1251. servo downfeed, electromagnetic chuck and con- MOORE NO. 2, 10" x 19" table, grinding spndl., S/N trols, OTW dresser, coolant system, S/N 63278. 7111. JONES & SHIPMAN MDL. 540 HYDRAULIC, 6" x 18" grinding cap., 6" x 1/2" wheel size, 1 HP belt drive CNC WIRE TYPE EDM spndl., incremental downfeed, perm. magnetic CHARMILLES ROBOFIL MDL. 310 5-AXIS, 33" x 19" chuck, S/N BO92871. max. part size, 1,000 lb. max. load, 15.7" max. part height, 15.7" X-axis travel, 9.84" Y-axis travel, 15.7" BRIDGEPORT MDL. 815 HAND FEED, 8" x 15" grind- Z-axis travel, 15.7" U-axis travel, 9.84" V-axis travel, ing cap., 10" x 1" wheel size, 1 HP, perm. magnetic auto. wire feed, S/N 2-2240. chuck, S/N G-107. UNIVERSAL CNC RAM TYPE EDM MOORE #3 JIG GRINDER CHARMILLES ROBOFORM MDL. 200, Charmilles CYLINDRICAL GRINDER CNC control, 22" x 15.7" table, 34.6" x 21.6" max. part JONES & SHIPMAN MDL. 1300, 12" x 24" grinding size, 12.6" X-axis travel, 8.66" Y-axis travel, 12.6" cap., 12" x 1" wheel size, 4 HP, swivel wheelhead and Z-axis travel, C-axis ram, S/N 25934. headstock, internal grinding attach., steadyrest, S/N B090713. MISCELLANEOUS CLAUSING VERTICAL MILLING MACHINE. TOOL & CUTTER GRINDERS MACHINERY SUNNEN MDL. MBB-1660 HORIZONTAL HONING CLAUSING MDL. 2276 PEDESTAL DRILL CINCINNATI NO. 2 MDL. MT, new 1990, 6" x 36" MACHINE, oil base, w/accessories, S/N 81029. PRESS, variable spd., 20" swing, S/N 517962. table, dbl. swivel wheelhead, universal workhead, tailstocks, index plates, S/N 7703A01-90-0060. WELLSAW MDL. 8 HORIZONTAL BANDSAW, 8" rd. SHOP BUILT H-FRAME ARBOR PRESS. cap., S/N 20710. OPTIMA DRILL GRINDER, 5" comparator scope, ASSORTED CARBIDE & PEDESTAL GRINDERS. Web turning attach., S/N 130. DAKE MDL. 3A RATCHET TYPE ARBOR PRESS. BENCH TYPE DRILL PRESSES.

MORI SEIKI 21" X 40" ENGINE LATHE JONES & SHIPMAN 12" X 24" UNIVERSAL SUNNEN MBB-1660 HORIZONTAL HONE CYLINDRICAL GRINDER VIEW OF COORDINATE MEASURING MACHINES VIEW OF TENSILE TESTER AND VARIOUS BENCH TOP Q.C. EQUIPMENT

QUALITY CONTROL LABORATORY NUMEREX MDL. 2424-18 BRIDGE TYPE COORDINATE MEASURING MACHINE, 24" X, 24" Y and 18" Z measuring range, w/computer and accessories, S/N A26-0174-1. GIDDINGS & LEWIS SHEFFIELD MDL. 1808 DCC CANTILEVER COORDINATE MEASURING MACHINE, Renishaw Mdl. TP-2 probe w/PH-1 manual tilt holder computer, drive system and accessories, S/N C-6441-1293. GAGEMASTER SERIES 80 22" OPTICAL COMPARATOR, Mdl. 89/GMX, 8" x 23-1/2" stage, 10X, 20X and 50X lenses in 4 pos. turret, Anilam D.R.O., digital protractor ring, S/N 366649. NIKON MDL. EPIPHOT METALLOGRAPH, w/camera attach.and binocular scope. TINIUS OLSEN 60,000 LB. TENSILE TESTER, S/N N.A. WILSON ROCKWELL MICRO HARDNESS TESTER, w/Microtan stage. WILSON ROCKWELL MDL. 3TTARB HARDNESS TESTER, S/N 2436. K.J. LAW HARDNESS TESTER. TRU-STONE 48" X 48" X 8" GRANITE SURFACE PLATE, Grade A, w/fabricated stand. 36" X 48" X 6" GRANITE SURFACE PLATE, w/stand. LECO MDL. PR-10 SAMPLE MOUNTING PRESS. LECO MDL. VP-150 VARIABLE SPEED SAMPLE POLISHER. LECO IR12 CARBON DETERMINATOR, Mdl. 762-200, w/Mdl. 762100 furnace, S/N 539-14A/7A. GAGEMASTER 22" OPTICAL COMPARATOR MACHINE SHOP ACCESSORIES (2) OPTICAL DIVIDING HEADS; ENGIS PANTAGRAPH DRESSER; KURT 6" AND 8" H.D. MILLING MATERIAL HANDLING VISES; BRIDGEPORT VISES; CAT-40 TOOLHOLDERS; LATHE CHUCKS; DRILL CHUCKS; LIVE CEN- & SHOP EQUIPMENT TERS; SEVERAL 10" AND 12" ROTARY TABLES; SINE VISE; LAPPING PLATE. 400 AMP BUSS BAR (APPROX. 150'); PALLET JACKS; CHAINS; SLINGS; WRIGHT 1 CU. YD. SELF- ROTARY SCREW AIR COMPRESSOR DUMPING HOPPER FORKLIFT CAGE; DOLLIES; QUINCY, 50 HP, air cooled, air receiver, skid mtd., S/N N.A. BARREL HANDLER; FAIRBANKS PLATFORM SCALE. FORKLIFTS OFFICE FURNITURE MITSUBISHI 6,000 LB. CAP., Mdl. FG-30, LP pwrd., 185" lift ht., large cushion tires, side-shifter, S/N & EQUIPMENT AF13D-30336. CONFERENCE TABLE, DESKS, CHAIRS, FILE CABI- CLARK 3,550 LB. ELECTRIC, Mdl. EC500-40E, 188" lift ht., 36 v., w/charger, S/N E355-112-3908FA. NETS, ETC. See catalog for details.

On-Site Bidding in Huntsville, Alabama or Bid Via Webcast at

NIKON EPIPHOT METALLOGRAPH PARTIAL VIEW OF MACHINE ACCESSORIES MITSUBISHI 6,000 LB. CAP. LPG FORKLIFT Presorted PUBLIC INVITED First Class Mail P.O. Box 19100 U.S. Postage PAID Houston, TX 77224-9100 THURSDAY, DECEMBER 9 • 10:00 A.M. Eugene, Oregon Permit No. 17 DATED MATERIAL – PLEASE DELIVER

ATTENTION: PLANT MANAGER POWDERED METAL OR EQUIPMENT BUYER COMPACTION PRESS FACILITY CLOSING Compacting Presses, Furnace Lines, Vacuum Furnace & Misc. Furnaces, Metal Powder Inventory, CNC & Conventional Machine Tools, CNC E.D.M.s, Grinders, Metallurgy Department, Q.C. & Measuring Equipment, Precision Machine Accessories, Shop Support Tools, Air Compressor, Forklifts, More AUCTION HUNTSVILLE, ALABAMA

DIRECTIONS & LODGING PROXY BIDS UNABLE TO ATTEND? FROM HUNTSVILLE INT’L AIRPORT: Exit airport, follow If you cannot attend this sale we will bid on your behalf. Bid on-line in real time at signs to Interstate-565. Take I-565 East toward Huntsville. Contact Houston office at (713) 691-4401 for instructions, TO PARTICIPATE YOU MUST: Go approx. 6 miles to the exit for Research Park Blvd., or go to our website at www.pmi-auction.com. Exit 14. Go north on Research Park Blvd. NW/AL-255 N 1. Register at www.BidSpotter.com. DO IT NOW. for approx. 2 miles. Take the Bradford Dr. East exit and PLANT & MACHINERY INC. 2. Either wire transfer, or mail a cashier’s check deposit in the merge onto Bradford Dr. NW (heading east). Turn left amount of $3,000 to: (north) onto Wynn Dr. NW. Go to Research Dr. NW and APPRAISAL DIVISION Plant & Machinery, Inc. P.O. Box 19100, Houston, TX 77224-9100 turn left (west). Proceed to auction site ahead at 4912 Confidential Industrial Machinery & Equipment Appraisals If you are using FedEx or another delivery service: 2901 W. Sam Houston Pkwy. N., Suite A-130, Call 1-800-282-8466 Research Dr. NW. Watch for auction signs. Houston, TX 77043, (713) 691-4401 Comfort Inn...... 256-562-2525 You must be registered and have your deposit in the hands of Plant 4725 University Dr., Huntsville, AL FINANCE YOUR AUCTION PURCHASE & Machinery, Inc. at least 24 hours prior to the start of the auction. La Quinta Inn Huntsville...... 256-830-2070 Conserve Your Cash & Increase Your Bidding Power Failure to register and/or failure to send your deposit to Plant & 4870 University Dr. NW, Huntsville, AL AuctionLea$e Provides M&E Financing With Approvals Machinery, Inc. may disqualify you from bidding. DON’T WAIT. Hampton Inn Huntsville...... 256-830-9400 from $5,000 to $999,000 (800) 438-1470 If you need assistance, don’t hesitate to call (713) 691-4401. 4815 University Dr., Huntsville, AL Apply Online: www.AuctionLease.com ALL WEBCAST BIDS ARE SUBJECT TO A 15% BUYER’S PREMIUM. TERMS & CONDITIONS A 12% Buyer’s Premium Will Apply On-site. ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO A 15% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation. FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY Everything will be sold to the highest bidder or bidders for cash in accordance with the CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises. ANY PURPOSE WHATSOEVER. ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC. from any future claim which shall pertain to the fitness or use of that asset as being purchased. Here is an example of what your letter should be: Mr. “Customer Name” is a customer Riggers, movers, electricians and buyers performing work at the Auction Site must provide of this bank. This bank will guarantee unqualified payment to PMI on the account listed PMI with evidence of insurance. The insurance coverage must be at a level acceptable to herein up to the amount of $ . This letter is good until January 10, 2011. PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may In default of payment of bills in full within the time therein specified, the Auctioneer in addition include consignment items. to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of Although all information has been obtained from sources deemed reliable, the auctioneer the sale. and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the Lots not paid for and/or removed within the time allowed may be resold at public or private information herein contained, or contained in our catalog. It is for this reason that buyers sale without further notice, and any deficiency, together with all expenses and charge of should avail themselves of the opportunity to make inspection prior to the auction. resale, will be charged to the defaulting purchaser. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly The buyer acknowledges that he or an agent has inspected all of the assets upon which he contact auctioneer prior to attendance. will be bidding and/or does purchase. These terms and conditions may be modified or supplemented by language in the catalog Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH available at the sale site or by announcement at the start of the sale. Bidders should be REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS attentive to those announcements and to the catalog language.

QS-0006945