General Machine Products Inc., Co. | 3111 Old Lincoln Hwy | Trevose, Pa phone (215)-357-5500 | fax (215) 357-6216
GMP FACILITIES LIST
CNC Lathes (2) Okuma 1420: dia. to 14.2" and lengths to 26.4", bar feed cap.2.25". (1) Mazak M20: dia. to 8.75" and lengths to 19.7", bar feed cap.1.75" (1) Mazak SQT100: dia. to 11.0" and lengths to 17.2", bar feed cap.1.63" with sub spindle and live tooling for mill / drill operations. (1) Okuma LT10: dia. to 8.3" and lengths to 26.5", bar feed cap. 1.63" with sub spindle and live tooling for mill / drill operations.
CNC Machining Centers (1) Makino A55: horizontal, 16" (2) pallet, 22"X, 22"Y, 22"Z, full 4th axis, 60 tools, 20,000 rpm spindle. (1) Mazak H400: horizontal, 16" (2) pallet, 22"X, 20"Y, 20"Z, 1 degree indexing 4th axis, 30 tools. (1) K&T HMC1500: horizontal, 60"X, 40"Y, 20"Z, 5 degree indexing 4th axis, 20 tools. (1) K&T MM1015: horizontal, 18" (2) pallet, 24"X, 24"Y, 20"Z, full contouring 4th axis, 120 tools. (1) Milwaukee VB4: vertical, 40"X, 27"Y, 16"Z, full contouring 4th axis, 30 tools. (4) Chiron 4512: vertical, 21"X, 12"Y, 16"Z, full 4th and positioning 5th axis, 20 tools. (1) LeBlond / Makino Model KE55: vertical, 21.6"X, 12.6"Y, 13.5"Z
Press Forming (1) Pacific 250 ton hydraulic "C" frame: max. open 20", max closed 8". Lwr. Bolster 26" x 52", Upper Ram 24" x 38". (2) Pacific 110 ton hydraulic "C" frame: max. open 18.25" max. closed 8.25". Lwr. Bolster 27"x 42", Upper Ram 21" x 29". (1) Pacific 100 ton hydraulic "C" frame: max. open 16.5" max. closed 6.0". Lwr. Bolster 18"x 35", Upper Ram 18" x 30". (1) HTC 60 ton hydraulic "C" frame: max. open 18.25" max. closed 8.25". Lwr. Bolster 18"x 28", Upper Ram 14" x 17".
Saw and Shear (1) Missler Horizontal Band Saw: 11" x 11" power feed. (1) Niagara power shear: 10 ft. x .187" thick mild steel.
EDM (1) Charmilles Model 200 Wire EDM Machine: 12" x 8.6" x 5" (U and V axis 1.97") max. taper 6 degrees.
Gear Cutting (2) Gleason Bevel Gear Generator: Model 104, 2.25" dia. x 1.0" width. (1) Fellows Gear Shaper 615A: 11.25" diameter x 5.0" face width. (1) Barber Coleman Model 16-16 (1) Barber Coleman Model 12 (1) Barber Coleman Model 3 (1) Lees And Bradner 12 HO Hobbing Machine: 14"diameter (1) Lees and Bradner 7HO Hobbing Machine: 8" diameter
Broaching (1) XL50 Horizontal Broach: 25 ton, 72" stroke
1 Drill Presses (1) Walker Turner #2 Morse, 1 Spindle (1) Barnes #5 Morse, 1 Spindle (1) Barnes #4 Morse, 2 Spindle (1) Willis #3 Morse, 4 Spindle (2) Rockwell #2 Morse, 4 Spindle (1) Rockwell #2 Morse, 12 Spindle (1) Rockwell #2 Morse, 3 Spindle (1) Rockwell #2 Morse, 2 Spindle (3) Rockwell #2 Morse, 1 Spindle (1) Allen #3 Morse, 6 Spindle (2) Delta #2 Morse, 12 Spindle (1) Delta #2 Morse, 2 Spindle (2) Delta #2 Morse, 1 Spindle
Milling (1) Bridgeport Model J 9" x 42" table (1) Index Vert. Mill, 9" x 42" table (2) Simplex Horiz. Mill 10 hp 12" x 42" table (1) Milwaukee S12 Mill, 5 hp 9" x 38" table (1) Milwaukee 2H Horiz. Mill, 5 hp, 9" x 38" table (2) Nichols Horiz. Mill, 7" x 21" table
Welding (4) Lincoln Arc Welders: 3 high hat, 1 ideal arc (1) Air Products AC/DC Gas Tungsten Arc Welder (1) Airco 1 lb. Gun Alum. Wire Welder (1) Lincoln TIG Welder (3) Miller Invusion 456 Mig welders (1) Systematics 325 Amp MIG Welder (1) Miller Syncrowave 350 x L TIG Welder (1) Peer Spot Welder 50 KVA (1) Miller Hand Held Spot Welder (1) Miller 450 Amp MIG Welder (2) Oxygen MAPP cutting torches (1) Tauring Tube Bender (1) Delta Drill Press (1) 30 ton C Frame Press (3) Electric Turn Tables
Quality ISO 9001 Compliant Brown and Sharpe direct computer controlled CMM: 29.5"x 41.6"x 19.7" Starret manual controlled CMM: 28"x 28"x18". Full range of metrology equipment including CMM's, hardness testers,comparators, O.D and I.D. Micrometers, Dial bore Gages, thread gages, plug gages etc.
Lathes (1) Hardinge Super Precision: 1 1/16"cap. (1) Traub A42: 1 1/2" cap. (1) Traub A25: 1 1/16" cap. (2) Warner and Swasey 2AC: 12" chuck (1) Warner and Swasey 2AB: 12"chuck, 3" bar cap. (1) American Engine Lathe: 19" x 60", 15" chuck. (1) Monarch Engine Lathe: 22" x 96", 15" chuck (1) Brown and Sharpe PTC-42: 1 5/8" cap. (1) Bullard Vertical Lathe: 36" Chuck
2 Tool Room (1) Bridgeport Model J with EZ TRAK DX (4) Bridgeport Model J w/ digital RO. 9" x 48" table (1) Blanchard Grinder No. 18: 42" dia. table (1) Ellis Horizontal Band Saw: 12" (1) DoAll Bandsaw 16", 24' x 31" table (1) Speedmaster Radial Arm Drill Model ERA (1) Unicut Model 300 tap disintegrator (1) Rockwell Drill Press: 1/2" (1) Enerpac Hyd. Arbor Press 50 tons (1) Anderson Hyd. Arbor Press: 2 ton (1) Milwaukee Chaplit Bench Filing Machine (1) Butterfly Bench Filing Machine (1) Hardinge Tool Room Engine Lathe (1) Monarch Engine Lathe: 14" x 36" (1) Monarch Engine Lathe: 20" x 50" (1) Clausing Surface Grinder: 10" x 20" table (1) Boyer Schultz Surface Grinder: 6" x 12" table (1) K.O. Lee Surface Grinder Grinder: 6" x 12" table (1) Black Diamond Drill Grinder: #7 to 3/8". (1) D&S Tool and Cutter Grinder: 8" x 23" (1) K.O. Lee Tool and Cutter Grinder: 5" x 36" (1) Cincinnati Tool and Cutter Grinder #2: 5" x 35" table (1) Hob Cutter Grinder (1) Super Max Vert. / Horiz. Mill 10" x 50" table w/ dig. RO (1) Sunnen Hone
R & D Model Shop (1) Bridgeport Milling Machine model J w/ dig. RO, 9" x 48" table (1) Bridgeport EA Path Lathe 16.5" x 40" (2) LeBlond / Makino Model KE55 Vertical Machining Ctr. 21.6"X, 12.6"Y, 13.5"Z
Miscellaneous (1) Roll-in Band Saw: 18.5" x 30.5" table (1) Empire Blast Cabinet: 48" x 48" (2) Porter Cable 4" Belt Sander (1) Redin Gear Deburring Machine (1) UCINO Centerless Grinder: 1/4" to 2" (1) Globe Tumbler Vari-drive (1) Ultramatic Vibrator, 5 cu.ft. (1) Vibradyne Vibrator, 3 cu.ft. (1) DiAcro Hydro Bender 1" bar cap. (1) Empire Blast Cabinet: 29" x 36" (1) Nova 250 Vibrator: 1 cu.ft.
Assembly Equipment (2) Rouselle Stamping Press Model OF, 5 ton cap. (1) Loshbough Jordan #2 Mech. Press 10 ton cap. (1) Bracker Radial Riveter Model RN101, cap. .02" -.23" steel (1) Bracker Radial Riveter Model PN100, cap. .02" -.23" (1) Bracker Radial Riveter Model PN300, cap. .16" -.63" (1) VSI Spinomatic Model TM20 (1) Eyelet Tool Co. Model 650 (tubular rivet) (1) Chicago Rivet Tubular Rivet Model 555Q, cap. .05" - 1/8" dia. (1) Enerpac Hydraulic Press PEM 1541, 50 tons (2) High Speed Hammer Riveter No. 2 AHD, speed 2600 (1) High Speed Hammer Riveter No. 4A, speed 1600 (1) High Speed Hammer Riveter No. 2A, speed 2200
3