HUMIDITY THERMOSTATS & CONTROLLERS
UT8001 | p. 1367 PXR4 Series | p. 1359
VT7600 | p. 1327 Series
1F80 Series | p. 1338 to Complete your Projects. Offering Mechanical, Digital, and Communicating Thermostats Mechanical, Digital, and Communicating Thermostats Offering THERMOSTATS & CONTROLLERS & THERMOSTATS Thermostat | p. 1392 Guards Prestige IAQ | p. 1305 Prestige Series THERMOSTATS & CONTROLLERS
Products manufactured MODEL/SERIES PAGE in the United States Accessories Testing Devices and Tools — Thermostat Tools and Change-Over Thermostats...... 1390 Products that are Sensor Mounting Accessories — Thermostat Remote Sensor Accessories...... 1391 new to the catalog Thermostat Guards — Thermostat Guards...... 1393
Bulb/Aqua Stats A19, A28, A319, A419 Series — Bulb Thermostats...... 1378
Communicating Thermostats Prestige IAQ — Programmable/Wireless Thermostats ...... 1305 VT7200, VT7300 Communicating — Zone and FCU Communicating Thermostats (BACnet, LON, N2) ...... 1321 VT7600 Communicating — AHU Communicating Thermostat Single and Multistage, Programmable and Non-programmable (BACnet, LON, N2)...... 1312 T7350, W7350 Series — T7350 Series Programmable Commercial Thermostats and W7350 Controller...... 1315
Fan Coil Thermostats VT7200, VT7300 Series — Zone Thermostats and FCU Thermostats...... 1310 TB7100A100 MultiPro™ Series — MultiPro™ Multispeed and Multipurpose A19/A28/ | p. 1378 Thermostats...... 1332 A319/A419 TB6575, TB8575 SuitePro™ Series — Digital Fan Coil Thermostats...... 1346 T158, T168 Series — Floating and Proportional Thermostats...... 1370 T170 Series — Fan Coil Thermostat with ADA-Compliant Digital Display...... 1372 T180 Series — Programmable Fan Coil Thermostats ...... 1374 T155, T167 Series — Line and Low Voltage Two-Position and Proportional Thermostats . 1376
Low/High Limit Thermostats A11 Series — Low Temperature Limit Controls ...... 1380 A70 Series — Low & High Temperature Limit Controls ...... 1381 L480 Series — Low Limit Temperature Controls ...... 1382
TSA, TF142 — Low-Limit Temperature Controls...... 1384 TC-105, TC-100 — Duct High Temperature Limits...... 1385
Mechanical Thermostats T170 Series | p. 1372 ET Series, UT8001 — Two-Position Room Thermostats ...... 1367 T22, T25, T26, T46 — Line-Voltage Thermostats...... 1368 TF115, TH109, and TRF115 Series — NEMA 4X Industiral Controls Thermostats...... 1386 THERMOSTATS
& CONTROLLERS T631F/G, TW155/255 Series — NEMA 4X Rated Thermostats...... 1388 TC-1100 Series — Two Position Room Thermostats...... 1389
Programmable/Non-Programmable Thermostats 1F95, 1F95EZ and 1F97 Series Thermostats — Big Blue™ and Blue™ Universal and Single Stage Programmable/Non-programmable Thermostats ...... 1323 VT7600 Series — Single and Multistage Programmable and Non-programmable Thermostats...... 1327 T87, TH3000, and TH4000 Series — Residential Thermostats, Programmable and Non- programmable ...... 1330 TH5000, TH6000, TB7000 Series — FocusPro™ Residential and Light Commercial Zip Economizer | Thermostats...... 1334 p. 1354 TH8000 Series, TB8220 Series — VisionPro™ Programmable Thermostats...... 1336 1F80 Series — Residential and Light Commercial Thermostats ...... 1338 T4000, T8000, and T12000 Series Thermostats — Digital Display Programmable Thermostats...... 1342 1F72, 1E78 and 1F78 Series Thermostats — Residential LCD Display Programmable/Non- Programmable Thermostats...... 1344
Proportional Room Thermostats (No Fan Control) TB6980 and TB7980 Series — Floating and Proportional Zone Thermostats...... 1348 RTC-2P — Proportional Room Thermostats ...... 1365
Stand Alone Controllers and Temperature Switches T775 Series — Single or Multi-Loop Standalone Controller...... 1350 System 450 — System 450 Modular Controls...... 1352 ZIP Economizer Series — Economizer...... 1354 PXR4 — Setpoint Controllers...... 1359 kele.com R820 Series — SCR Power Controller...... 1361 UCM-420A — Setpoint Controllers...... 1363 THERMOSTATS & CONTROLLERS PROGRAMMABLE/WIRELESS THERMOSTAT PRESTIGE IAQ
DESCRIPTION The Prestige High Definition (HD) Color Touchscreen Thermostat provides control of 24 VAC of heating and cooling systems . RedLINK™ enabled to work with compatible wireless accessories . These newly updated thermostats come in a variety of colors and can be accessed via the internet or through the mobile app available from Honeywell . The new Prestige is on the leading edge of design and remote access when it comes to thermostats for both residential and light commercial applications . Check out the entire line for one that NEWfits your application . !
FEATURES • 60% smaller than Prestige 2.0 and available in 4 colors • Delta T Alerts and Diagnostics inform customers when their system is not operating as expected • Residential or light commercial use • User Interaction Log provides a searchable history of setting changes Prestige IAQ-EIM • Assignable outputs for indoor air quality and staging control • Selectable staging options • Customizable service reminders • Up to 4H/2C heat pump or 3H/2C conventional systems THERMOSTATS & CONTROLLERS
SPECIFICATIONS Suppy Voltage 24 VAC Temperature Setting Range System Type 4 heat/2 cool heat pump and up to Heating 40° to 90°F (4 .5° to 32°C) 3 heat/2 cool conventional Cooling 50° to 99°F (10° to 37°C) Sensor Type Operating Temperature Temperature Onboard 20kΩ NTC Thermostat 32° to 120°F (0° to 48 .9°C) Humidity Capacitive EIM -40° to 165°F (-40° to 73 .8°C) Communication RedLINK devices Operating Humidity Baud Rate 900 MHz frequency range Thermostat 5% to 90% condensing, Analog Input EIM EIM 5% to 95% non-condensing 2 Universal inputs, temperature or Dimensions dry contact selectable (not available Thermostat with single- piece thermostat) Prestige IAQ 4-1/2"W x 3-1/2"H x 7/8"D Output (11 .5 x 8 .9 x 2 .2 cm) EIM 7 Prestige 2.0 6-13/16"W x 3-7/8"H x 1-7/16"D Standalone 6 (USB on some models) (17 .3 x 9 .9 x 3 .6 cm) Contact Rating EIM 9 34"H. X 4 .83"W X 1 .6"D 21 EIM terminals W-O/B, Y, W3-Aux2, A-L/A (23 .7 x 12 3. x 4 1. cm) Maximum Current 1 .0A, Measurement Range Building material and content EIM terminals G, U1, U2, U3 dependent Maximum Current 0 .5A Weight 2 0. lb (maximum item) EIM terminals W2-Aux1, Y2 Approvals This device complies with Part 15 Maximum Current 0 .6A of the FCC Rules . (15 .19, 15 .21, Temperature Sensor Accuracy 15 .105) ± 1 .5° at 70°F (0 .75° at 21°C) RoHS Statement Ye s Warranty 5 years (excludes batteries)
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1305 THERMOSTATS & CONTROLLERS PROGRAMMABLE/WIRELESS THERMOSTAT PRESTIGE IAQ
WIRING - THX9321& THX9421
Typical wiring of a 3-heat / 2-cool heat pump system with one Typical wiring of a 3-heat / 2-cool heat pump system with two transformer. transformers.
Transformer 120 24 C Air Handler 120 24 C Transformer VAC VAC R VAC VAC R Thermostat Thermostat NEWO/B ! O/B CHANGEOVER VALVE C CHANGEOVER VALVE C
AUX/E BACKUP HEAT Rc AUX/E Rc 1 3 Y COMPRESSOR STAGE 1 R Y COMPRESSOR STAGE 1 R
Y2 COMPRESSOR STAGE 2 U1 Y2 COMPRESSOR STAGE 2 U1
G FAN RELAY U1 G FAN RELAY U1 1 1 L/A COMPRESSOR MONITOR U2 L/A COMPRESSOR MONITOR U2 OR ZONE PANEL OR ZONE PANEL K 2 U2 K 2 U2 6 6 Backup Heat BACKUP HEAT 120 24 R Transformer VAC VAC Prestige THX9321 and heat pump system with C one transformer Prestige THX9321 and heat pump system with two transformers Typical wiring of a 2-heat / 2-cool conventional system with one transformer. Typical wiring for geothermal radiant heat, geothermal Transformer 120 24 C VAC VAC R forced-air and backup heat with one transformer. Thermostat W HEAT STAGE 1 C Transformer 120 24 C VAC VAC R W2 HEAT STAGE 2 Rc Thermostat Y COMPRESSOR STAGE 1 5 R O/B CHANGEOVER VALVE C Y2 COMPRESSOR STAGE 2 U1 AUX/E BACKUP HEAT Rc
G FAN RELAY U1 Y COMPRESSOR STAGE 1 R 1 4 A U2 Y2 COMPRESSOR STAGE 2 U1 GEOTHERMAL K U2 G FAN RELAY RADIANT U1 6 HEAT L/A COMPRESSOR MONITOR STAGE 1 U2 OR ZONE PANEL K 2 3 U2 Prestige THX9321 and 2-heat / 2-cool 6 conventional system with one transformer Prestige THX9321 and geothermal radiant heat, geothermal forced-air and backup heat with one
THERMOSTATS & CONTROLLERS transformer 1 U1 and U2 terminals are dry contacts. 2 L/A terminal sends continuous output when thermostat is set to EM HEAT mode except when set up for Economizer or TOD. 21 See “Economizer Module Wiring Diagrams” beginning on page 151. 3 U1 or U2 terminals must be used for geothermal radiant heat (ISU 2010). Thermostat allows 2 stages of radiant heat—geothermal (stage 1) and boiler (stage 2). 4 “U” terminals are normally open dry contacts when set up for geothermal radiant heat. You must install a field jumper if radiant heat is powered by system transformer. Do NOT install a field jumper if radiant heat has its own transformer. 5 Remove jumper if using separate transformers. 6 Connect the THP9045 Wiresaver Module to the K terminal in heating/cooling applications that do not have a common wire at the thermostat. The K terminal cannot be used in heat-only applications. See THP9045 installation instructions for more information. NOTE: For additional set-up, wiring, and operation, see installation manual.
1306 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS PROGRAMMABLE/WIRELESS THERMOSTAT PRESTIGE IAQ
WIRING - EIM
Typical wiring of a heat pump system with up to Typical wiring of a conventional system with up to 4-stage heat and 2-stage cool with one transformer 3-stage heat and 2-stage cool with one transformer
FURNACE TO THERMOSTAT TO THERMOSTAT TRANSFORMER EIM R EIM 24 120 C VAC VAC O/B CHANGEOVER VALVE HEAT PUMP BACKUP HEAT CONV HEAT STAGE 1 POWER O/B W AUX1 STAGE 1 POWER NEWHEAT AUX1 ! W2 HEAT STAGE 2 AUX2 BACKUP HEAT HEAT COOL AUX2 W3 STAGE 2 COOL HEAT STAGE 3 STATUS FAN LEDS STATUS FAN U1 Y COMPRESSOR LEDs STAGE 1 U1 U2 G U2 FAN U3 L/A Y2 COMPRESSOR U3 A 4 3 STAGE 2 G FAN RELAY Y COMPRESSOR L/A STAGE 1 COMPRESSOR 3 MONITOR OR Y2 COMPRESSOR 1 ZONE PANEL STAGE 2
JUMPERS 1
A AIR HANDLER A JUMPERS 3 B TRANSFORMER B R 5 4 C 24 120 C C D VAC VAC D
S4 S4 CONNECT CONNECT CONNECT OPTIONAL CONNECT OPTIONAL S4 OPTIONAL SENSORS S4 OPTIONAL SENSORS SENSORS TO SENSORS SENSORS TO SENSORS S3 AND S4 TERMINALS S3 S1 AND S2 TERMINALS TO S3 AND S4 S3 TO S1 AND S2 S3 TERMINALS S3 TERMINALS 2 2 2 2 THERMOSTATS & CONTROLLERS
See installation instructions for additional wiring options.
NOTES The RedLINK Internet Gateway requires a physical Ethernet connection to an open port on a user-supplied router . The router must be connected to the internet via a user's Internet Provider for access to the Honeywell server . There is no need for a static IP address . To date, there have been no reported issues with port blocking or firewalls preventing access .
In order to guard against possible wireless signal overload, assure that all wireless RedLINK devices including the RedLINK Internet Gateway are spaced a minimum of 2 feet apart from each other for proper operation .
REDLINK WIRELESS GATEWAY (THM6000R1002) CONTRACTOR SETUP 21 1 . Connect power to the RedLINK Internet Gateway using the supplied 120VAC power supply wall module . 2 . Connect the supplied Ethernet cable from the RedLINK Internet Gateway to an available port on a designated Router (router supplied by others) . 3 . Using the Prestige Thermostat Contractor Installation Options Menu select Wireless Device Manager, then select Add Device . 4 . Press and release the Connect button located on the bottom of the RedLINK Internet Gateway . The device will appear on the Thermostat . Exit the menu . 5 . Note the Device MAC ID and Device CRC information on the bottom of the device (required for account assignment) .
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1307 THERMOSTATS & CONTROLLERS PROGRAMMABLE/WIRELESS THERMOSTAT PRESTIGE IAQ
GATEWAY SETUP
Connect power cord to Connect RedLINK Gateway to a an electrical outlet not router or modem with Ethernet controlled by a wall switch cable (RJ45). SuppliedNEW by Others ! THM6000R1002
ACCOUNT SETUP 1 . Visit www .mytotalconnectcomfort .com and click “Create an Account ”. There is no charge for this service . 2 . Enter required account information including email, password and security questions/answers . 3 . Account verification email will be sent to account email - log into email and validate account to return to www .mytotalconnectcomfort .com 4 . Enter New Location for RedLINK Internet Gateway including location type (commercial or residential) and alert email accounts 5 . Assign RedLINK Internet Gateway to location by entering the unique device MAC ID and device CRC information (Found on bottom of THM6000R1002)
Account is now active and may be accessed via any supported web browser or smart phone application . THERMOSTATS & CONTROLLERS
21
1308 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS PROGRAMMABLE/WIRELESS THERMOSTAT PRESTIGE IAQ
ORDERING INFORMATION
PRESTIGE KITS Kit Included in Kit Part Number Part Number Description Prestige IAQ Kit THX9421R5021WW Thermostat - White Front, White Side YTHX9421R5101WW THM5421R1021 Equipment Interface Module C7089R1013 Wireless Outdoor Sensor NEW!50062329-001 Discharge/Return Sensors (Qty. 2) Prestige IAQ Kit THX9421R5021BB Thermostat - Black Front, Black Side YTHX9421R5101BB THM5421R1021 Equipment Interface Module C7089R1013 Wireless Outdoor Sensor 50062329-001 Discharge/Return Sensors (Qty. 2) Prestige IAQ Kit THX9421R5021SG Thermostat - Silver Front, Gray Side YTHX9421R5101SG THM5421R1021 Equipment Interface Module C7089R1013 Wireless Outdoor Sensor 50062329-001 Discharge/Return Sensors (Qty. 2) Prestige IAQ Kit THX9421R5021WG Thermostat - White Front, Gray Side YTHX9421R5101WG THM5421R1021 Equipment Interface Module C7089R1013 Wireless Outdoor Sensor
50062329-001 Discharge/Return Sensors (Qty. 2) THERMOSTATS & CONTROLLERS Prestige IAQ Kit THX9421R5021WW Thermostat - White Front, White Side YTHX9421R5085WW THM5421R1021 Equipment Interface Module 50062329-001 Discharge/Return Sensors (Qty. 2) Prestige IAQ Kit THX9421R5021BB Thermostat - Black Front, Black Side YTHX9421R5085BB THM5421R1021 Equipment Interface Module 50062329-001 Discharge/Return Sensors (Qty. 2) Prestige IAQ Kit THX9421R5021SG Thermostat - Silver Front, Gray Side YTHX9421R5085SG THM5421R1021 Equipment Interface Module 50062329-001 Discharge/Return Sensors (Qty. 2) Prestige IAQ Kit THX9421R5021WG Thermostat - White Front, Gray Side YTHX9421R5085WG THM5421R1021 Equipment Interface Module 50062329-001 Discharge/Return Sensors (Qty. 2) Prestige 2.0 Kit THX9321R5030 Thermostat YTHX9321R5061 REM5000R1001 Portable Comfort Control 21 Prestige 2.0 Kit THX9321R5030 Thermostat YTHX9321R5079 C7089R1013 Wireless Outdoor Sensor Note: Part numbers can be ordered separately .
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1309 THERMOSTATS & CONTROLLERS ZONE AND FCU COMMUNICATING THERMOSTAT (BACNET, LON) VT7200, VT7300 COMMUNICATING
DESCRIPTION VT7200 Zone thermostats are digital-display, heating/cooling, with outputs for two-position, floating, and proportional terminal unit control . They are ideal for baseboard heat, unit heaters, radiant panels, reheat, or VAV box (pressure-dependent) control . VT7300 Fan Coil Unit (FCU) thermostats are digital- display, heating / cooling, with outputs for two-position, floating, or proportional control . In addition, they include multi-speed fan relays for high, medium, and low fan speed control . Both NEW! thermostats offer remote temperature sensor and remote digital inputs configured for night setback, filter alarm, motion sensor, VT7200C5031B VT7305C5031B door/window switch, or service indication . All models offer BACnet Zone BACnet FCU standard BACnet or LON open-protocol communications . Thermostat Thermostat FEATURES • BACnet or LON communication • Setpoint range limits (heating and • Heat, cool, and reheat time base models cooling) outputs are configurable • Stand-alone operation on • Three configurable inputs for night • Direct or reverse acting (proportional communication loss setback, setback override, motion models) • Two-position, floating, or proportional sensor, door or window switch, filter • Keypad lockout functions models alarm, service advisory, heat/cool • Dehumidification control models • Remote room sensor option changeover °F/°C (configurable) • Three-speed fan control (FCU model) • Adjustable deadband • Display offset • Selectable system control (FCU • Single setpoint adjustment • Adjustable temporary occupied time model) • PIR cover sensor (Optional)
SPECIFICATIONS Supply Voltage 19-30 VAC, 50/60 Hz Universal Input Dry contact or 10K Type 2 Model 24 Supply VA 2 VA thermistor Display Two line backlit LCD, ±0 .2°F (±0 .1°C) Remote Sensor Thermistor, 10K Type 2 Model 24 Control Accuracy Temperature, ±0 .9°F (±0 .5°C) Control Type Proportional plus integral (PI) VT7350C50xx, VT7350F50x Proportional Band Heating and cooling, 2°F (1 .1°C) Dehumidification, ±5% RH from 20% to Floating Time Base Adjustable, 0 .5 to 9 minutes 80% RH Cycles Per Hour Adjustable 3 to 8 Thermostat Type Zone (VT7200) or FCU (VT7300) Override Timer 0 to 24 hours, 1-hour increments, Cover Controls pushbutton reset Zone Models Up/down/override buttons Sensor Offset Adjustable ±5°F (±2 .5°C), ±15% RH Heat/Cool “on" LEDs (humidity models) FCU Models Up/down/°C-or-°F/fan/mode buttons Deadband Adjustable 2° to 5°F (1° to 2 5°C). Fan/Heat/Cool “on" LEDs Setpoint Adjusted depending on heating or Control Outputs See terminal designation table cooling mode, heating and cooling VT7200C50xx 5 triacs (H/C, 2-position or floating setpoints are changed simultaneously control) with respect to the deadband Cooling limits 54° to 100°F (12°C to 37 .7°C) VT7200F50xx 1 triac, 2 analog outputs (H/C Heating limits 40° to 90°F (4 .5° to 32°C) proportional 0 to 10 VDC) Keypad Lockout Selectable system/fan/unoccupied VT7300C50xx, VT7350C50xx System Setting O=off, H=heating, C=cooling, THERMOSTATS & CONTROLLERS 3 relays (fan), 5 triacs (H/C, 2-position A=automatic changeover or floating control) (FCU models) O/C, O/H, O/A/H/C, H/O/C VT7300F50xx, VT7350F50xx Fan Setting L=low, M=medium, H=high, A=auto 3 relays (fan), 1 triac, 2 analog outputs (FCU models) L/M/H, L/H, L/M/H/A, L/H/A, On/A 21 (H/C proportional 0 to 10 VDC) Wiring 18 AWG maximum, 22 AWG Triacs and relays 30 VAC, 1A, 3A inrush recommended Analog outputs 0-10 VDC, 2KΩ minimum impedance, Enclosure UL FR1, flame retardant plastic direct or reverse acting Color White Auxiliary Inputs 2 digital inputs, 1 universal input, 1 Mounting Standard vertical, 2" x 4" box remote sensor Operating Temperature 32° to 122°F (0° to 50°C) Configurable as Service/status reminders Operating Humidity 0 to 95% RH (non-condensing) Door/window/motion sensor switch Dimensions 4 .94"H x 3 .38"W x 1 .13"D Filter alarm (12 .5 x 8 .6 x 2 .9 cm) Central night setback clock Weight 0 .75 lb (0 .34 kg) Remote occupied override switch Approvals UL Listed File #E234137, cULus, CE, Heat/Cool changeover, contact or LonMark sensor RoHS Statement Ye s Digital Inputs Dry contact Warranty 1 year 1310 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS ZONE AND FCU COMMUNICATING THERMOSTAT (BACNET, LON) VT7200, VT7300 COMMUNICATING
WIRING
TABLE 1. TERMINAL DESIGNATIONS BY THERMOSTAT (FCU & ZONE) ZONE THERMOSTATS FAN COIL UNIT (FCU) THERMOSTATS ** Terminals and function are not present on every thermostat VT7200C-E VT7200F-E VT7300A-E VT7300C-E VT7350C-E VT7300F-E VT7350F-E < LON Thermostat Function** VT7200C-B VT7200F-B VT7300A-B VT7300C-B VT7350C-B VT7300F-B VT7350F-B < BACnet 2-position/ Proportional 2-position 2 position/ 2 position/ Proportional Proportional/ Terminal** floating floating floating/RH RH X X X X X 1 High speed fan (FCU) X X X X X 2 Medium speed fan (FCU) X X X X X 3 Low speed fan (FCU) X X X X X X X 4 24 VAC hot power for thermostat, fan and BO-(1,2,3,4) AO-(1,2) X X X X X X X 5 24 VAC common for thermostat, fan and BO-(1,2,3,4) AO-(1,2) X X X X X X X 6 BO-5, aux output, configurable (reheat, occupied/un-occupied) NEWX X X X X! X X 7 BO-5, aux output, configurable (reheat, occupied/un-occupied) X X X X 8 BO-3, open heating X X X 9 BO-4, close heating X X X 9 AO-2, heating X X X 10 BO-1, open cooling X X X 10 AO-1, cooling X X X X 11 BO-2, close cooling X X X X X X X 12 BI-1, configurable (night set back clock, motion detector, window switch) X X X X X X X 13 RS, remote sensor, 10 KΩ thermistor X X X X X X X 14 Scom, common for remote sensor, BI-(1,2), and UI-1 X X X X X X X 15 BI-2, configurable (door, filter, service, remote override) X X X X X X X 16 UI-3, configurable (change over contact or sensor, supply air sensor)
FCU & ZONE SERIES THERMOSTATS Network Relays card FCU & ZONE Internal device connection electronics (TRIAC’s except as noted)
B A A B S ** Fan Fan Fan 24 V 24 V BO-5 BO-5 BO-3 O O O O BO-2 BI-1 RS BI-2 UI-3 H M L HOT COM 4 2 1 1 COM + – Ref
Fan Fan Fan * AUX O H C Prop Prop OCC H M L H C Type 2 Sensor Type 2 To network sensor THERMOSTATS & CONTROLLERS 24 VAC24 VAC • BACnet C/O • Lon Talk 2-Pos Proportional 2-Pos Window Remote Door or or Fltg 0-10 VDC or Fltg D/N clock room filter Supply motion sensor service air T- 1 T- 2 rem. temp. override 24 VAC Transformer 2-Pos, Fltg, Proportional (provided by others) depending on model
Note: Terminals are Thermostat Dependent See Table 1. ** Common device reference on BACnet networks as needed. *One Transformer Wiring (Delete T2) Alternate Device Based on Set-up
ORDERING INFORMATION
MODEL THERMOSTAT TYPE VT7200 Zone controller VT7300 Fancoil controller commercial (override occupancy) VT7305 Fancoil controller hospitality (hotel/lodging with temp scale) VT7350 Fancoil controller commercial (override occupancy) with humidity sensor VT7355 Fancoil controller hospitality (hotel/lodging with temp scale) with humidity sensor OUTPUTS C 2 floating + 1 digital (for VT7200), 2 floating + 1 auxiliary (for VT73xx) F 2 analog + 1 digital (for VT7200), 2 analog + 1 auxiliary (for VT73xx) COVER 5000 Viconics logo 5031 Blank cover (no logo) 5500 PIR cover with Viconics logo 5531 PIR cover blank (no logo) COMMUNICATION PROTOCOL E Echelon/LONworks B BACnet 21 P Wireless/Zigbee Pro W Wireless
VT7305 C 5031 W Example: VT7305C5031W Hospitality fancoil controller with 2 floating + 1 auxiliary outputs in a blank cover case with wireless communication protocol
ACCESSORIES PAGE COV-PIR-FCU-C-5031 PIR cover for FCU thermostat COV-PIR-ZN-5031 PIR cover for Zone thermostat TG511A1000 Thermostat guard- clear-medium size 1392
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1311 THERMOSTATS & CONTROLLERS AHU COMMUNICATING THERMOSTAT SINGLE AND MULTISTAGE, PROGRAMMABLE AND NON-PROGRAMMABLE, (BACNET, LON) VT7600 COMMUNICATING
DESCRIPTION The VT7600 Communicating Thermostats are digital display, single or multistage, seven-day programmable or nonprogrammable PI thermostats (°F or °C) for use with AHU controls and heat pumps for both heating and cooling VT7600A5031B applications . The VT7600 has both system and fan switching BACnet Thermostat with internal sensor or remote sensor capabilities . Five buttons control a simplified menu for over 20 configurable parameters . A communication card is added for multiple NEW! protocols, including BACnet and LON . Other control features are listed below .
FEATURES • PIR cover available PROGRAMMABLE MODELS ALL MODELS • Permanent program retention • Two or four configurable events per • No logo on thermostat cover • Two configurable DI inputs day • 1H/1C, 2H/2C (3H/2C heat pump) • Two line LCD display (°F or °C) • Progressive recovery or none models • Proportional + Integral control • 12 or 24 hour clock • Fan switching (on/auto/smart) • Six hour clock retention • System switching (O/A/C/H) ECONOMIZER MODELS • Occ/Unocc auxiliary contact out • Two line 8 digit backlit LCD Display • Mixed-air (0-10V) control outputs • Three status LEDs (Fan, Clg, Htg) • Mixed-air sensor input COMMUNICATION MODELS • Five control keys • Mixed-air setpoint (SP) • BACnet • Remote sensor and OSA sensor • Economizer changeover S.P. • LON inputs temperature • Wireless • Adjustable deadband • OSA damper minimum position in % • Wireless/ Zigbee Pro
SPECIFICATIONS Supply Voltage 20-30 VAC, 50/60 Hz Control Output 1A relays 30 VAC, 3A surge maximum Supply VA 2 VA Auxillary Contact Output 1A relay 30 VAC, N .O ./N .C . follows Display Two-line backlit LCD occupied schedule Controls Five menu-driven push buttons – up, Mixed Air Output Proportional 0-10V DC, 2 kΩ minimum down, menu, no, yes/scroll (economizer model) Thermostat Type Seven-day programmable models, non- Control Type Proportional plus integral programmable models Deadband Adjustable 2° to 4°F (1° to 2°C) Optimal Start Progressive recovery (enable/disable) OSA Lockout Limits Heat Pump High/Low OSA lockout (emer heating/comp . Heating 15° to 120°F (26° to 49°C), 5°F heating) increments Stages (Dependent upon model) 1H/1C, Cooling -40° to 95°F (-40° to 35°C), 5°F 2H/2C, (3H/2C heat pump) 2H/2C + increments proportional mixed-air economizer Low Limit Protection Enable/disable, heating @ 47°F (5 .5°C) Memory (schedule) Permanent EEPROM Power Up Delay 10 to 120 seconds Clock (12 or 24 hour) Six-hour power fail retention Keypad Lockout Three levels (full, none, partial) System Switching Off/Auto/Cool/Heat Cycles Per Hour Adjustable, heating 3-8 CPH, cooling Fan Switching On-continuous 3-4 CPH Auto-on demand Display Offset Adjustable ±5°F (2 .5°C), 1°F Smart-on/occupied, off/unoccupied increments THERMOSTATS & CONTROLLERS Control Accuracy ±0 .9°F (±0 .5°C) @ 70°F (21°C) LED Indicators Three green on (fan, cooling, heating) Setpoint Range Wiring 18 AWG max, 22 AWG recommended Heating 40° to 90°F (4 .5° to 32°C) Operating Temperature 32° to 122°F (0° to 50°C) Cooling 54° to 100°F (12° to 37 .5°C) Operating Humidity 0% to 95% RH (non-condensing) 21 Setpoint High/Low Limits Individually adjustable, H/C Enclosure ULFR1 flame-retardant plastic Remote Sensor Color White Room Sensor Room sensor input auto-detected 10K Mounting Standard vertical 2" x 4" box Type 2 thermistors Dimensions 4 .94"H x 3 .38"W x 1 .13"D Outside Air Outside air input auto-detected 10K (12 .5 x 8 .6 x 2 .9 cm) Type 2 thermistors Weight 0 .75 lb (0 .34 kg) Mixed Air Mixed air input auto-detected Approvals UL Listed File #E234137, cUL, CE, (economizer model only) 10K Type 2 LonMark thermistors RoHS Statement Ye s Auxiliary Inputs Two dry contact digital inputs Warranty 1 year Four Types Service/status reminders Filter alarm Central night setback clock Remote occupied override timer 1312 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS AHU COMMUNICATING THERMOSTAT SINGLE AND MULTISTAGE, PROGRAMMABLE AND NON-PROGRAMMABLE, (BACNET, LON) VT7600 COMMUNICATING
WIRING
TABLE 1. TERMINAL DESIGNATION BY THERMOSTAT MODEL THERMOSTAT MODEL VT7600 Note: Terminals and functions are not present on every thermostat
VT7600A-E VT7600B-E VT7605B-E VT7600H-E VT7652A-E VT7652B-E VT7656B-E VT7652H-E Function LON VT7600A-B VT7600B-B VT7605B-B VT7600H-B VT7652A-B VT7652B-B VT7656B-B VT7652H-B BACNET Energizes on a call for first stage cooling (first stage heating HP) Energizes on a call for second stage cooling (second stage heating HP) Energizes fan in accordance with the selected fan mode 24 VAC from equipment transformer 24 VAC (common) from equipment transformer RH24 VAC for heating stages (jumper to RC for single power systems) NEW! W1E nergizes on a call for first stage heating (third stage heating HP) W2E nergizes on a call for second stage heating O/B HP reversing valve configurable (O = on or B = on) AUXConfigurable auxiliary output (follows schedule) D1C onfigurable digital input D2C onfigurable digital input EC 0 - 10 VDC economizer actuator output RSRemote room sensor ScomSensor common OSOutdoor air sensor MSMixed air sensor
VT7600 SERIES THERMOSTAT Internal relays and connections Network card VT Thermistor electronics sensor inputs 0-10V ** Y1 Y2 G RC C RH W1 W2 O/B AUX D1 D2 EC RS Scom OS MS + – Ref
* Heat 1 Heat 2 Rev. Aux ACT. Cool 1 Cool 2 Fan valve
To Network THERMOSTATS & CONTROLLERS Type 2 Type 2 Type 2 • BACnet * • LonTalk
24V 24V Note: All outputs are * If using the same power source for the thermostat and heating loads, delete 24 VAC. * transformer T-2 and install a jumper across RC and RH. Then wire W1 and W2 Note: Terminals are T-1 T-2 common to T1 ( ). thermostat-dependent. 24 VAC Thermostat Power ** Common device reference on BACnet. See Table 1. (provided by installer)
21
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1313 THERMOSTATS & CONTROLLERS AHU COMMUNICATING THERMOSTAT SINGLE AND MULTISTAGE, PROGRAMMABLE AND NON-PROGRAMMABLE, (BACNET, LON) VT7600 COMMUNICATING
ORDERING INFORMATION
MODEL THERMOSTAT TYPE VT7600 RTU controller, no local schedule VT7605 RTU + economizer controller, no local schedule VT7606 RTU + IAQ + economizer controller, no local schedule VT7607 RTU + humidity controller, no local schedule VT7652 RTU controller, local schedule VT7656 RTU + economizer controller, local scheduleNEW! VT7657 RTU + humidity controller, local schedule OUTPUTS A 1H/1C (VT7600 and VT7652 only) B 2H/2C (Not available on VT7606) E 2H/2C + IAQ + economizer controller (VT7606 and VT7656 only) F 2C + Analog heat controller (VT7600 and VT7652 only) H 3H/3C Heatpump controller (VT7600 and VT7652 only) W 2H/2C + humidity +watersource heatpump controller (VT7600 and VT7652 only) COVER 5000 Viconics logo 5031 Blank cover (no logo) 5500 PIR cover w/ Viconics logo 5531 PIR cover blank (no logo) COMMUNICATION PROTOCOL E Echelon/LONworks B BACnet P Wireless/Zigbee Pro W Wireless
VT7605 B 5031 W Example: VT7605B5031W RTU + economizer with 2 heat/2 cool, blank cover, wireless
ACCESSORIES PAGE TG511A1000 Thermostat guard- clear-medium size 1392 COV-PIR-HPUMP-5031 PIR cover for HP thermostat COV-PIR-RTU-5032 PIR cover for RTU thermostat THERMOSTATS & CONTROLLERS
21
1314 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS T7350 SERIES PROGRAMMABLE COMMERCIAL THERMOSTATS AND W7350 CONTROLLER T7350, W7350 SERIES
DESCRIPTION The T7350 Commercial Programmable Thermostat controls 24 VAC single zone heating, ventilating and air conditioning (HVAC) equipment . The T7350 consists of a thermostat and a subbase . The thermostat includes the keypad and display for 7-day programming and the subbase includes equipment control connections . T7350M models have 2 modulating outputs for heat and/or cool, and the T7350H models have LonWorks® capability .
The W7350 WebStat is a web-based building manager that allows contractors and facility managers to view and command T7350H Commercial Programmable Thermostats . It communicates over NEW® ! the LonWorks network to perform building management control of the T7350H thermostats through a web browser . It runs building management applications such as trending, scheduling and alarming . T7350 Series The WebStat Bundle (W7350A1000) includes the WebStat controller, a LON® card, and a power supply .
FEATURES • 7-day programming with two Occupied and two Not Occupied • Remote sensor capability for temperature (including outdoor air periods per day and discharge air) and humidity sensors • Individual heat and cool setpoints for Occupied and Not • T7350M provides 2 modulating heat and/or cool outputs Occupied periods • T7350H provides networking capability on LonWorks® bus • Advanced configuration using TStatSpec software or PDA using Free Topology Transceiver (FTT) • PID control minimizes temperature fluctuations • T7350H conforms to LonMark® Space Comfort Profile for • Recovery ramp control automatically optimizes equipment rooftop applications start times based on building load • W7530 web-based controller supports up to 20 W7350H • Keypad multi-level lockout available with all models thermostats THERMOSTATS & CONTROLLERS
SPECIFICATIONS T7350 Models All Relay Outputs (at 30 Vac) Mounting Means Mounts on subbase; subbase mounts Running 1 .5A maximum on wall using two 5/8” long #6-32 screws Inrush 7 .5A maximum (included) . Modulating Output 4 to 20 mA with 510 ohm maximum Throttling Range for Modulating Outputs terminating resistance Automatically adjusts based on heat/cool System Current Draw (without load) stages . 5 VA maximum at 30 Vac, 50/60 Hz Manually adjustable with TStatSpec NOTE: Relays are N .O . Single-Pole, Single-Throw (SPST) . software or PDA Outdoor Sensor Wiring Requires 18 gauge wire Clock Accuracy (at 77°F [25°C]) Humidity Ratings 5% to 90% RH, noncondensing . ±1 min ./month (30 days) Emergency Heat Indication Minimum Stage Operation Time (fixed) Display indicates when Emergency Heat Minimum On Heat: 1 minute; cool: 3 minutes is activated (Em) Minimum Off (Cool and Heat Pump) Temperature Ratings 1 minute Operating Ambient 30° to 110°F (-1° to 43°C) Power 24 VAC, 50/60 Hz .; 20 to 30 VAC, 50/60 Shipping -30° to +150°F (-34°°C to +66°C) Hz Display Accuracy ±1°F (±1°C) Input Setpoint 21 Temperature 20KΩ Range Heating: 40° to 90°F (4° to 32°C) Humidity 0-10 VDC Cooling 45° to 99°F (7° to 37°C) Outdoor 3000 PTC Deadband 2°F (1°C) Discharge Air 20KΩ Loss of Power The thermostat maintains programmed Occupancy Sensor Dry contact switching 30 VDC at times and temperatures for the life of the 1 mA product . Clock and day information is retained for a minimum of 48 hours . NOTE: To achieve the 48-hour power-loss clock retention, the T7350 must be powered for at least 5 minutes .
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1315 THERMOSTATS & CONTROLLERS T7350 SERIES PROGRAMMABLE COMMERCIAL THERMOSTATS AND W7350 CONTROLLER T7350, W7350 SERIES
SPECIFICATIONS (continued) Communicating Model T7350H: PDA System Requirements Connection Terminals for the LonWorks Palm OS® 3 .5 .x to 5 .2 .1 Bus . Dynamic Heap 256K bytes Network jack for quick access by personal Free RAM Space 1000K bytes computer based tools . Serial Communications RS-232 Communications service-pin pushbutton Approvals European Community Mark (CE) Listed . to simplify startup . UL 873 Recognized, NEC Class 2 FCC. LonMark Functional Profile NEWPart 15 subpart J Class A .cUL! . 8500_20 Space Comfort Controller . Dimensions LonMark SCC Object Type T7350 models 6-3/4"W x 4-1/2"H x 2-3/16"D 8504 Rooftop See Fig . 2 . (17 .1 x 11 .4 x 5 .6 cm) LonMark Program Identifier W7350 model 6-23/32"W x 4"H x 2-3/16"D 80:00:0C:55:04:03:04:2E . (17 .1 x 10 .2 x 5 .6 cm) LonMark Application Interoperability Weights Version 3 .3 T7350 models 1 .25 lb (0 .57 kg) Honeywell LonMark Plug-In file downloads: W7350 model 1 .25 lb (0 .57 kg) plugin .ge51 Warranty .honeywell 1 year .de/index .htm# TStat Spec System Requirements Note: For more specification data on the W7350 please see Windows XP or Windows 7 manufacturer’s specification sheet . (www kele. .com)
T7350 THERMOSTAT FEATURES Maximum Stagesa Auxiliary LONWORKS® Model Applications Heat Cool Features Relay Capability? T7350A 1b 1b Yes No b b T7350B Conventional or 2 2 Outdoor, Discharge Air Capability Yes No T7350D Heat Pump Yes No 3 (2)c 3 (4)c Humidity, Occupancy, Outdoor, Discharge Air Capability T7350H1009 Isolated Yes Normally T7350H1017 Humidity, Occupancy, Outdoor, Discharge Air Capability, Open Yes Modulating 2 modulating, 2b relay 4-20 mA output (2-10 VDC with 500 ohm resistor) T7350M Yes No a All models are down-selectable and can be configured to control fewer stages than the maximum allowed. b One extra stage (of either heat or cool) can be configured using the auxiliary relay. c Heat pump applications for these models have a maximum of two heat stages and two cool stages.
DEFAULT SETPOINTS Control Occupied Not Occupied Standby Heating 70°F (21°C) 55°F (13°C) 67°F (19°C)
THERMOSTATS & CONTROLLERS Cooling 75°F (24°C) 85°F (29°C) 78°F (26°C)
21
1316 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS T7350 SERIES PROGRAMMABLE COMMERCIAL THERMOSTATS AND W7350 CONTROLLER T7350, W7350 SERIES
WIRING
SUBBASE
X RH RC AUX W1 Y1 G
2
HEAT FAN NEW! RELAY 1 RELAY COMPRESSOR HEAT CONTACTOR 1 RELAY 2 L2 L2 1 1 L1 L1 (HOT) (HOT) HEATING COOLING TRANSFORMER TRANSFORMER
1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.
2 WHEN INSTALLED ON A SYSTEM WITH TWO TRANSFORMERS, REMOVE THE FACTORY-INSTALLED JUMPER.
Typical hookup of T7350A in two-stage heat and one-stage cool conventional system with two transformers
TR23 REMOTE SENSOR OUTDOOR AIR THERMOSTATS & CONTROLLERS PT AS S SENSOR COMPRESSOR CONTACTOR 2 GND SENSOR SET LE D BYP 1 2 3 4 5 6 7 8 9 10 11 12 DISCHARGE AIR HEAT SENSOR RELAY 2
SUBBASE T5 T6 T7 T4 T3 OS OS AS AS W2 Y2
X RH RC AUX W 1 Y1 G
2
HEAT FAN RELAY 1 RELAY
COMPRESSOR CONTACTOR 1 3 L2 L2 1 ECONOMIZER 1 L1 L1 (HOT) (HOT) HEATING COOLING TRANSFORMER TRANSFORMER 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. 21
2 WHEN INSTALLED ON A SYSTEM WITH TWO TRANSFORMERS, REMOVE THE FACTORY-INSTALLED JUMPER.
3 USE ECONOMIZER INSTRUCTIONS FOR INSTALLATION DIRECTIONS.
Typical hookup of T7350B in two-stage heat and two-stage cool conventional system with two transformers
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1317 THERMOSTATS & CONTROLLERS T7350 SERIES PROGRAMMABLE COMMERCIAL THERMOSTATS AND W7350 CONTROLLER T7350, W7350 SERIES
WIRING
TR23-H REMOTE SENSOR OUTDOOR 4 AIR COMPRESSOR PT AS S SENSOR ECONOMIZER CONTACTOR 2 GND SET SENSOR LE D BYP 1 2 3 4 5 6 7 8 9 10 11 12 DISCHARGE HEAT HEAT AIR RELAY 3 RELAY 2 SENSORNEW! SUBBASE T5 T6 T7 T4 T3 OS OS AS AS AUX W3/Y4Y3W2Y2
HS HC HP M M X RH RC AUX W1 Y1 G COMPRESSOR CONTACTOR 3
HUMIDITY MOTION 3 HEAT FAN SENSOR SENSOR RELAY 1 RELAY
COMPRESSOR L2 CONTACTOR 1 1 2 L1 (HOT)
1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.
2 ENSURE TRANSFORMER IS SIZED TO HANDLE THE LOAD.
3 HEAT/COOL SYSTEMS WITH ONE TRANSFORMER REQUIRE THE FACTORY-INSTALLED JUMPER.
4 USE ECONOMIZER INSTRUCTIONS FOR INSTALLATION DIRECTIONS.
5 NO NEED TO WIRE HC TERMINAL BECAUSE THE T3 TERMINAL IS INTERNALLY TIED TO HC, WHICH IS ALSO TIED TO TERMINAL 1 COMMON AT THE SENSOR.
Typical hookup of T7350D in three-stage heat and three-stage cool conventional system with one transformer.
TR23-H REMOTE SENSOR OUTDOOR 4 AIR COMPRESSOR PT ASS SENSOR ECONOMIZER CONTACTOR 2 GN D SENSO R SET LE D BYP 1 2 3 4 5 6 7 8 9 10 11 12 DISCHARGE HEAT HEAT AIR RELAY 3 RELAY 2 SENSOR
SUBBASE T5 T6 T7 T4 T3 OS OS AS AS AUX W3/Y4Y3W2Y2
EB EB HS HC HP M M X RH RC AUX W1 Y1 G 5 COMPRESSOR CONTACTOR 3 ® LONWORKS HUMIDITY MOTION 3 HEAT FAN BUS SENSOR SENSOR RELAY 1 RELAY THERMOSTATS & CONTROLLERS LONWORKS® BUS COMPRESSOR L2 CONTACTOR 1 1 2 L1 21 (HOT)
1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.
2 ENSURE TRANSFORMER IS SIZED TO HANDLE THE LOAD.
3 HEAT/COOL SYSTEMS WITH ONE TRANSFORMER REQUIRE THE FACTORY-INSTALLED JUMPER.
4 USE ECONOMIZER INSTRUCTIONS FOR INSTALLATION DIRECTIONS.
5 WHEN USING THE TR23-H FOR HUMIDITY SENSING THERE IS NO NEED TO WIRE HC TERMINAL BECAUSE THE T3 TERMINAL IS INTERNALLY TIED TO HC, WHICH IS ALSO TIED TO TERMINAL 1 COMMON AT THE SENSOR
Typical hookup of T7350H1009 in three-stage heat and three-stage cool conventional system with one transformer
1318 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS T7350 SERIES PROGRAMMABLE COMMERCIAL THERMOSTATS AND W7350 CONTROLLER T7350, W7350 SERIES
WIRING
TR23-H REMOTE SENSOR OUTDOOR MODULATING R AIR – COOL PT ASS SENSOR + (4-20 mA) X SENSOR SET GND LED BYP 1 2 3 4 5 6 7 8 9 10 11 12 DISCHARGE MODULATING R AIR – HEAT SENSOR + (4-20 mA) X
SUBBASE NEWT5 T6 T7 T4 T3 !OS OS AS AS MX MH MC AUX EB EB HS HC HP M M X RH RC AUX W1 Y1 G 4 2
® LONWORKS HUMIDITY MOTION HEAT FAN BUS SENSOR SENSOR RELAY 1 RELAY LONWORKS® BUS COMPRESSOR CONTACTOR 1 3 L2 L2 1 ECONOMIZER 1 L1 L1 (HOT) (HOT) HEATING COOLING TRANSFORMER TRANSFORMER
1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.
2 WHEN INSTALLED ON A SYSTEM WITH TWO TRANSFORMERS, REMOVE THE FACTORY-INSTALLED JUMPER.
3 USE ECONOMIZER INSTRUCTIONS FOR INSTALLATION DIRECTIONS.
4 WHEN USING THE TR23-H FOR HUMIDITY SENSING THERE IS NO NEED TO WIRE HC TERMINAL BECAUSE THE T3 TERMINAL IS INTERNALLY TIED TO HC, WHICH IS ALSO TIED TO TERMINAL 1 COMMON AT THE SENSOR.
Typical hookup of T7350H1017 for system with two independent heat stages (one modulating), THERMOSTATS & CONTROLLERS two independent cool stages (one modulating), and two transformers.
TR23-H REMOTE SENSOR OUTDOOR MODULATING R AIR – COOL PT 5 ASS SENSOR + (4-20 mA) X GND SENSOR SET LED BYP 1 2 3 4 5 6 7 8 9 10 11 12 DISCHARGE MODULATING R AIR – HEAT SENSOR + (4-20 mA) X
SUBBASE T5 T6 T7 T4 T3 OS OS AS AS MX MH MC
HS HC HP M M X RH RC AUX W1 Y1 G
HUMIDITY MOTION 3 HEAT FAN SENSOR SENSOR RELAY 1 RELAY
COMPRESSOR CONTACTOR 1 4 L2 1 2 ECONOMIZER L1 21 (HOT)
1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.
2 ENSURE TRANSFORMER IS SIZED TO HANDLE THE LOAD.
3 HEAT/COOL SYSTEMS WITH ONE TRANSFORMER REQUIRE THE FACTORY-INSTALLED JUMPER.
4 USE ECONOMIZER INSTRUCTIONS FOR INSTALLATION DIRECTIONS.
5 WHEN USING THE TR23-H FOR HUMIDITY SENSING THERE IS NO NEED TO WIRE HC TERMINAL BECAUSE THE T3 TERMINAL IS INTERNALLY TIED TO HC, WHICH IS ALSO TIED TO TERMINAL 1 COMMON AT THE SENSOR.
Typical hookup of T7350M for system with two independent heat stages (one modulating), two independent cool stages (one modulating), and one transformer.
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1319 THERMOSTATS & CONTROLLERS T7350 SERIES PROGRAMMABLE COMMERCIAL THERMOSTATS AND W7350 CONTROLLER T7350, W7350 SERIES
ORDERING INFORMATION MODEL DESCRIPTION T7350A1004 Single stage heat pump compatible with auxiliary T7350M1008 Modulating with 2 stage heat and 2 stage cool T7350B1002 Multi-stage heat pump compatible with auxiliary T7350D1008 Multi-stage heat pump compatible with occupancy and humidity feature and auxiliary T7350H1009 Multi-stage heat pump compatible with occupancy and humidity feature communicating LonWorks® T7350H1017 Modulating with 2 stage heat and 2 stage coolNEW with occupancy and humidity feature communicating LonWorks®! W7350A1000 Webstat controller for T7350 series thermostats
ACCESSORIES MODEL DESCRIPTION 50014064-001 Infra-red thermostat module for T7350 Series C7041B2005 Duct temperature sensor, 6 inch C7041B2013 Duct temperature sensor, 12 inch C7041C2003 Duct temperature sensor, 18 inch C7041J2007 Duct temperature averaging sensor, 12 foot C7089R2013 Wireless outdoor sensor THERMOSTATS & CONTROLLERS
21
1320 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS ZONE THERMOSTAT AND FCU THERMOSTAT VT7200, VT7300 SERIES
DESCRIPTION VT7200 Zone thermostats are digital-display, heating/cooling, with outputs for two-position, floating, and proportional terminal unit control . They are ideal for baseboard heat, unit heaters, radiant panels, reheat, or VAV box (pressure- dependent) control . VT7300 Series Fan Coil Unit (FCU) thermostats are digital-display, heating / cooling, with outputs for two-position, floating, or proportional control . In addition, they include multispeed fan relays for high, medium, and low fan speed control . Both thermostats offer remote temperature sensor and remote digital inputs configured for night setback, VT7305C50xx VT7200C50xx NEWfilter alarm, motion sensor, door/window switch,! or service FCU Thermostat indication . Zone Thermostat FEATURES • °F/°C (configurable) • Zone or FCU control models • Display offset • Two-position, floating, or proportional models • Adjustable temporary occupied time • Remote room sensor option • Heat, cool, and reheat time base outputs are • Adjustable deadband configurable • Setpoint range limits (heating and cooling) • Direct or reverse acting (proportional models) • Three configurable inputs for any of: night setback, • Keypad lockout functions setback override, motion sensor, door or window • Dehumidification control models switch, filter alarm, service advisory, heat/cool • Three-speed fan control (FCU model) changeover • Selectable system control (FCU model) SPECIFICATIONS Supply Voltage 19-30 VAC, 50/60 Hz Control Type Proportional plus integral (PI) Supply Current 2 VA Proportional Band Heating and cooling, 2°F (1 .1°C) Display Two-line backlit LCD, ±0 2°F. (0 .1°C) Floating Time Base Adjustable, 0 .5 to 9 minutes
Control Accuracy Temperature, ±0 .9°F (±0 5°C). Cycles Per Hour Adjustable 3 to 8 THERMOSTATS & CONTROLLERS VT7355C50xx, VT7355F50xx Override Timer 0 to 24 hours, 1-hour increments, Dehumidification, ±5% RH from 20 to pushbutton reset 80% Sensor Offset Adjustable ±5°F (±2 5°C),. ±15% RH Thermostat Type Zone (VT7200) or FCU (VT7300) (humidity models) Cover Controls Deadband Setpoint Adjustable 2° to 5°F (1° to 2 .5°C) Zone Models Up/down/override buttons Heat/Cool Adjusted depending on heating “on” LEDs or cooling mode, heating and FCU Models Up/down/°C-or-°F/fan/mode buttons cooling setpoints are changed Fan/Heat/Cool “on” LEDs simultaneously with respect to the Control Outputs See terminal designation table deadband VT7200C50xx 5 triacs (H/C, 2-position or floating) Cooling Limits 54° to 100°F (12° to 37 .7°C) VT7200F50xx 1 triac, 2 analog outputs (H/C Heating Limits 40° to 90°F (4 .5° to 32°C) proportional 0 to 10 VDC) Keypad Lockout Selectable system/fan/unoccupied VT73(05,55)C50xx 3 relays (fan), 5 triacs (H/C, System Setting O=off, H=heating, C=cooling, 2-position or floating control) A=automatic changeover VT73(05, 55)F50xx 3 relays (fan), 1 triac, 2 analog FCU Models O/C, O/H, O/A/H/C, H/O/C outputs (H/C proportional 0 to 10 Fan Setting L=low, M=medium, H=high, A=auto VDC) FCU Models L/M/H, L/H, L/M/H/A, L/H/A, On/A Triacs and Relays 30 VAC, 1A, 3A inrush Enclosure UL FR1, flame retardant plastic Analog Outputs 0-10 VDC, 2K minimum impedance, Mounting Standard vertical, 2" x 4" box direct or reverse acting Wiring 18 AWG maximum, 22 AWG Auxiliary Inputs 2 digital inputs, 1 universal input, recommended 21 1 remote sensor Color White Configurable as Service/status reminders Operating Temperature 32° to 122°F (-30° to 50°C) Door/window/motion sensor switch Operating Humidity 0–95% RH non-condensing Filter alarm Dimensions 4 94"H. x 3 .38"W x 1 .13"D Central night setback clock (12 .5 x 8 .6 x 2 .9 cm) Remote occupied override switch Weight 0 75. lb (0 .34 kg) Heat/Cool changeover, contact or Approvals UL, cUL, File #E234137, CE sensor RoHS Statement Ye s Digital Inputs Dry contact Warranty 1 year Universal Input Dry contact or 10K Type 2 Model 24 thermistor Remote Sensor Thermistor, 10K Type 2 Model 24 March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1321 THERMOSTATS & CONTROLLERS ZONE THERMOSTAT AND FCU THERMOSTAT VT7200, VT7300 SERIES
WIRING
TABLE 1. TERMINAL DESIGNATIONS BY THERMOSTAT MODEL ZONE THERMOSTATS FAN COIL UNIT (FCU) THERMOSTATS ** Terminals and functions are not present on every thermostat VT7200C5031 VT7305C5031 VT7355C5031 VT7200F5031 VT7305F5031 VT7355F5031 2-Position 2-Position 2-Position or Terminal** Thermostat Function** Proportional Proportional Proportional/RH or Floating or Floating Floating/RH XXXX1High speed fan XXXX2 Medium speed fan XXXXNEW3 Low speed fan ! XXXXXX4 24 VAC power for thermostat, fan and BO-(1, 2, 3, 4), AO-(1, 2) XXXXXX5 24 VAC common for thermostat, fan and BO-(1, 2, 3, 4), AO-(1, 2) XXXXXX6 BO-5, auxiliary output, configurable (reheat, occupied, or unoccupied) XXXXXX7 BO-5, auxiliary output, configurable (reheat, occupied, or unoccupied) XXX8BO-3, open heating, (VT7200C5031, VT7355C5031) XXX9BO-4, close heating (VT7200C5031, VT7355C5031) XXX9AO-2, heating (VT7305F5031, VT7355F5031) XXX10 BO-1, open cooling (VT7200C5031) XXX10 AO-1, cooling (VT7305F5031, VT7355F5031) XXX11 BO-2, close cooling, (VT7200C5031, VT7355C5031) XXXXXX12 BI-1, configurable (night setback clock, motion detector, window switch) XXXXXX13 RS, remote sensor, 10 kΩ thermistor XXXXXX14 SCOM, common for remote sensor, BI-(1, 2) and UI-1 XXXXXX15 BI-2, configurable (door, filter, service, remote override) XXXXXX16 UI-3, configurable (changeover contact or sensor, supply air sensor)
VT7200/7300 SERIES THERMOSTATS Relays VT7200/7300 Internal Device Connection Electronics (TRIACs except as noted)
Fan 24 V 24 V B A A B Fan Fan BO-5 BO-5 BO-3 O O O O BO-2 BI-1RS S BI-2 UI-3 H M L HOT COM 4 2 1 1 COM
Fan Fan Fan * AUX O H C Prop Prop OCC H M L H C Type 2 Sensor Type 2 Sensor 24 VAC 24 VAC Terminals are Thermostat Dependent C/O Note: or See Table 1. 2-Pos Proportional 2-Pos Window Remote Door or Fltg 0-10 VDC or Fltg D/N Clock Room Filter Supply *One Transformer Wiring (Delete T2) Motion Sensor Service Air Alternate Device Based on Set-up T- 1 T- 2 Rem. Temp. Override 24 VAC Transformer 2-Pos, Fltg, Proportional (provided by others) Depending on Model
ORDERING INFORMATION
MODEL THERMOSTAT TYPE VT7200 Zone Controller VT7300 Fancoil Controller Commercial (Override Occupancy) VT7305 Fancoil Controller Hospitality (Hotel/Lodging w/ Temp Scale) VT7350 Fancoil Controller Commercial (Override Occupancy) w/ Humidity Sensor VT7355 Fancoil Controller Hospitality (Hotel/Lodging w/Temp Scale) w/ Humidity Sensor OUTPUTS
THERMOSTATS & CONTROLLERS C 2 floating + 1 digital (for VT7200), 2 floating + 1 auxiliary (for VT73xx) F 2 analog + 1 digital (for VT7200), 2 analog + 1 auxiliary (for VT73xx) COVER 5000 Viconics logo 5031 Blank Cover (no logo) 5500 PIR Cover w/ Viconics logo 21 5531 PIR Cover Blank (no logo) VT7305 C 5031 Example: VT7305C5031 Hospitality fancoil controller with 2 floating and 1 auxiliary outputs with a blank cover
RELATED PRODUCTS PAGE 680-243-6 Changeover thermostat with conduit fitting COV-FCU-L Blank cover for fan coil thermostats COV-ZN Blank cover for zone thermostats KTR24 Remote room thermistor sensor 1169 KTR24-LED-MB Remote room sensor with override button and LED 1169 ST-D24 10K Type 2 duct temperature themistor 1197 ST-R24SC Strap-on pipe thermistor 1247
1322 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS BIG BLUE™ AND BLUE™ UNIVERSAL AND SINGLE STAGE PROGRAMMABLE/ NON-PROGRAMMABLE THERMOSTATS 1F95, 1F95EZ AND 1F97 SERIES THERMOSTATS DESCRIPTION The White Rodgers 1F95 Series universal model thermostats are quickly configured for single stage, multi- stage or heat pump and heat pump dual fuel systems . They can also be selected as programmable or non- programmable . The White Rodgers 1F97 Series universal model thermostats is for single stage use only, but comes with all of the other features mentioned above . The White Rodgers 1F97EZ Series universal model thermostat comes with a large “Easy Reader” display . These thermostats feature NEWthe largest display on a keypad operated thermostat,! as well as simple and logical installer setup and programming, enhanced by audio confirmation of entries . Variable keypad security prevents tampering and there is also temporary and vacation overrides for added convenience . These thermostats offer power stealing assist for maximum battery life, remote sensing, as well as the exclusive Cool Savings™ feature which adjusts the setpoint after 20 minutes to compensate for humidity loss thus providing the ultimate in comfort control and energy savings . 1F95-1277-ST
FEATURES • Large 6 inch or 12 inch display • Choice of programming options and time periods • Quick one button programming • Intuitive menu-driven set-up, programming and • Configurable as manual heat/cool, auto changeover, operation, with audio prompt to confirm entries heat only or cool only • Choice of battery powered with optional power stealing THERMOSTATS & CONTROLLERS • Exclusive battery power monitor assist or hardwired with battery backup • Indoor remote sensing averaging option
SPECIFICATIONS Supply Voltage 24 VAC Differential 1° Input Current 1 .5A per terminal Display Type LCD Temperature Range 32° to 105°F (0° to 41°C) Storage Temperature -40° to 150°F (-40° to 65°C) Setpoint Range 45° to 99°F (7° to 37°C) Operating Temperature 32° to 105°F (0° to 41°C) Schedule Type 4 (Morning, Day, Evening, Night), 2 Dimensions (Day and Night), 2 (Day and Night) 1F95-1277/1F97-1277/1F95-1280/1F95-1291 Materials Of Construction 6-2/7"L x 5-1/8"Hx 1-3/4"D ABS plastic (16 x 13 x 4 .4 cm) Mounting Any except upside down 1F95-0680/1F95-0671/1F95EZ-0671 Accuracy ±1° 6-2/5"L x 4-3/5"H x 1-3/4"D Program Options 7 day, 5+1+1 (16 .26 x 11 .7 x 4 .4 cm) Bulb and Capillary No Weight Control Type Low voltage thermostat 1F95-1277/1F97-1277/1F95-1280/1F95-1291 21 Cycles Per Hour Cool 2 .5 1 91. lb (0 .87 kg) Cycles Per Hour Heat 5 1F95-0680/1F95-0671/1F95EZ-0671 Enclosure NEMA 1 Remote Sensor Select models only 1 05. lb (0 .48 kg) Sensor Type Thermistor Warranty 5 years System Type Universal - SS, MS or HP Deadband 1°
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1323 THERMOSTATS & CONTROLLERS BIG BLUE™ AND BLUE™ UNIVERSAL AND SINGLE STAGE PROGRAMMABLE/ NON-PROGRAMMABLE THERMOSTATS 1F95, 1F95EZ AND 1F97 SERIES THERMOSTATS
WIRING
To Remote Temperature Sensor {
Jumper
B O Y G RC RH C* + S - W 6 L System
Blower/ Circula- NEW! Single Energized tor Fan Third Stage Energized Energiz- on call Energiz- 24 Volt Power Diagnostic 24 Volt 24 Volt Power Remote Energized wire for (SS) for Cool ed on Com- Remote Indicator in Heat ed in (Hot) (Hot) Temp- Temp- on call for call for mon Temp- 3-wire (See or Off Cool (Com- Heat erature erature Heat Cool (option- erature zone Note 1 ) Mode Mode pressor) Cool & Sensor Sensor for Heat al) Sensor valve (if ELE is sel- ected)
NEUTRAL 24VAC 120VAC * Common connection required for diagnostic or malfunction indication. HOT
1F97-1277 CLASS II Single Stage System with Single Transformer TRANSFORMER NOTE: For more wiring and installation information please go to www.kele.com and select the related documents for this family or call your Kele sales representative.
Jumper
L O/B Y Y2 W/E W2 G RH RC C 6 System Blower/ Single Diagnostic O Circulator Stage 1 Indicator Energized Constantly No Output No Fan Energized Optional* (SS1) Input in Heat 24 Volt 24 Volt Output on Call for 24 Volt or Cool Mode Cool Mode Mode (Hot) (Hot) Cool (and (Com- System B 1st Stage 1st Stage Heat Cool Heat if mon) Multi- Malfunction Energized Constantly Cool Heat Mode configured Stage 2 Switch in Heat, Off, Mode 2nd Stage for Electric (MS2) Input Emergency 2nd Mode Stage Heat)
Comfort Alert II Module or Similar System NEUTRAL Diagnostic Module 24VAC 120VAC HOT See Module Instructions * Common connection required for diagnostic or malfunction indication. for details CLASS II 1F95EZ-0671 TRANSFORMER Single Stage or Multi-Stage System (No Heat Pump) with Single Transformer
Jumper THERMOSTATS & CONTROLLERS L O/B Y Y2 W/E W2 G RH RC C A1 System
Single Diagnostic O Blower/ Energized Constantly Stage 1 Indicator No Output Circulator Energized in No Optional* (SS1) Input Heat Fan Energized 24 Volt 24 Volt Pre-purge, 21 Cool Mode Output 24 Volt Morning, or Cool Mode Mode on Call for (Hot) (Hot) (Com- Day, Eve, System B 1st Stage 1st Stage Cool (and Heat Cool mon) Night Multi- Malfunction Energized Constantly Cool Heat Mode Heat if Stage 2 Switch in Heat, Off, Mode 2nd Stage configured 1F95-0680 (MS2) Input Emergency 2nd for Electric only Mode Stage Heat)
Comfort Alert II Module or Similar System NEUTRAL Diagnostic Module 24VAC 120VAC See Module Instructions HOT for details * Common connection required for diagnostic or malfunction indication. CLASS II 1F95-0680 TRANSFORMER Single Stage or Multi-Stage System (No Heat Pump) with Single Transformer
1324 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS BIG BLUE™ AND BLUE™ UNIVERSAL AND SINGLE STAGE PROGRAMMABLE/ NON-PROGRAMMABLE THERMOSTATS 1F95, 1F95EZ AND 1F97 SERIES THERMOSTATS
WIRING (continued)
Jumper
L O/B Y Y2 W/E W2 G RH RC C
System
O Blower/ Single Diagnostic Energized Constantly Circulator Stage 1 Indicator No Output in No Fan Energized Optional* (SS1) Input Heat 24 Volt 24 Volt Cool Mode Output on Call for 24 Volt or Cool Mode Mode (Hot) (Hot) Cool (and (Com- System 1st Stage 1st Stage Heat Cool B Heat if mon) NEWMulti- Malfunction !Cool Heat Mode Energized Constantly configured Stage 2 Switch Mode 2nd Stage in Heat, Off, for Electric (MS2) Input 2nd Emergency Stage Heat) Mode
Comfort Alert II Module or Similar System NEUTRAL Diagnostic Module 24VAC 120VAC See Module Instructions HOT for details * Common connection required for diagnostic or malfunction indication. CLASS II TRANSFORMER 1F95-0671 Single Stage or Multi-Stage System (No Heat Pump) with Single Transformer
To Remote Temperature Sensor {
Jumper
B O Y2 Y G RC RH C + S - W2 W/E 6 L *24 VAC common connection THERMOSTATS & CONTROLLERS System optional for system operation.
Blower/ Ener- Required for fault or malfunction Single Circula- gized indication, remote temperature Stage 1 No No Power Fault Output Cool tor Fan Output on call Closed sensor, or for continuous (SS1) Energiz- 24 VAC Power Remote Power Indicator Ener- Mode Energiz- for Conn- backlight operation. ed in 24 VAC 24 VAC Com- remote Temp- Remote or gized 1st ed on Heat ection Cool & (Hot) (Hot) mon Temp- erature Temp- System in Heat Cool Stage call for for Off Cool Heat (option- erature Sensor erature Malfunc- Multi- Mode mode (Com- Cool & Heat Heat 3-wire Mode al) * Sensor signal Sensor tion Comfort Stage 2 2nd pressor) for Heat Mode Mode zone Switch Alert II module (MS2) Stage (if ELE 2nd 1st valve or similar (Com- is sel- Stage Stage malfunction pressor) ected) module NEUTRAL 24VAC 120VAC HOT
CLASS II 1F95-1277 TRANSFORMER Single Stage or Multi-Stage System (No Heat Pump) with Single Transformer
21
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1325 THERMOSTATS & CONTROLLERS BIG BLUE™ AND BLUE™ UNIVERSAL AND SINGLE STAGE PROGRAMMABLE/ NON-PROGRAMMABLE THERMOSTATS 1F95, 1F95EZ AND 1F97 SERIES THERMOSTATS
WIRING
System RC RH CY Y2 W/EW2G O/B6 L Installer Call for cool No Output Call for heat No output Configuration “Call for Service” Single Stage 1 Menu selects 24 volt (malfunction (SS1) “O” or “B” for common Blower/Circulator fan indicator) for changeover (optional energized on a call Power closed 24 volt 24 volt function. Set Heat Pumps for system for cool or Fan On connection for power for power for to “O” terminal with “L” terminal operation, (also energized in SPDT 3-wire cooling heating NEWenergized in Cool zone valve connection!. Multi Stage 2 required Cool mode-1st Cool mode-2nd Heat mode-1st Heat mode-2nd heating if configured Original production for remote & Off mode. Set (MS2) stage stage stage stage for Electric Heat) 1F95-1291’s sensor) to “B” terminal energized in do not have this Heat & emergency connection mode
NEUTRAL 24VAC 120VAC HOT 1F95-1280/1F95-1291 Single Stage or Multi-Stage System (No Heat Pump) with Single Transformer
1F95-1280 Remote Sensor Terminals Damper Terminal 1F95-1291 Humidification/De-humidification Terminals
+ S - A1 HM DHM
Humidification Terminal, Energizes on De-energizes on call for Dehumidifica- Supply voltage Remote Supply voltage Damper or call for heat if Humidity setpoint is tion to lower the fan speed. The DHM to remote temperature to remote Economizer above room humidity. Can also be used terminal is only used on systems with a temperature sensor signal temperature Operation to provide humidification independent of compatible dehumidification feature that sensor sensor (see configuration a call for heat and/or in cooling mode if have the required terminal connection menu item 31) Automatic Humidification is selected in on the contol module or have a relay Configuration Menu item #34 installed to lower the fan speed
ORDERING INFORMATION
MODEL DESCRIPTION 1F95-1277 Single or Multi-stage programmable or non-programmable thermostat with 12 inch touch screen 1F97-1277 Heat pump programmable thermostat with 12 inch touch screen 1F95-1280 Single or Multi-stage programmable or non-programmable thermostat with 12 inch touch screen 1F95-1291 Single or Multi-stage programmable or non-programmable thermostat with humidity control and 12 inch touch screen 1F95-0680 Single or Multi-stage heat pump compatible thermostat commercial style with 6 inch display 1F95-0671 Single or Multi-stage heat pump compatible thermostat universal style with 6 inch display 1F95EZ-0671 Single or Multi-stage heat pump compatible thermostat universal style with EZ read 6 inch display
THERMOSTATS & CONTROLLERS Note: All models available in a 6-pack .
ACCESSORIES 21 F145-1328 Indoor remote sensor for 1F95
RELATED PRODUCTS PAGE ATK63 Wire guard for duplex thermostats 1392 F29-0198 Thermostat guard - 8.125"H x 4.375"W x 3.375"D (20.6 x 11.1 x 8.6 cm) inside dim. 1392
1326 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS SINGLE AND MULTISTAGE PROGRAMMABLE AND NON-PROGRAMMABLE THERMOSTAT VT7600 SERIES
DESCRIPTION The VT7600 Series is a digital display single or multistage 7-day programmable or non-programmable PI thermostat (°F or °C) . It is used with AHU control and heat pump for both heating and cooling applications . The VT7600 has both system and fan switching with internal or remote sensor capabilities . Five buttons control a simple menu for setup of over 20 configurable parameters . Other control features are VT7600 NEWlisted below . ! FEATURES ALL MODELS ALL MODELS PROGRAMMABLE MODELS • Fan switching (on/auto/smart) • Screen lockout (partial/total) • Two or four events per day • System switching (off/auto/cooling/ • Power fail start up delay • Progressive recovery or none heating) • H/C changeover (manual or auto) • 12 or 24 hour clock • Two line 8 digit backlit LCD Display • Adjustable deadband • Six-hour clock retention • Three status LEDs (fan, cooling, • Individual setpoint range stops • occupied/unoccupied output contact heating) H/C ECONOMICAL MODELS • Five control keys • Extended fan run time • Mixed-air (0-10V) control output • Remote and outside air sensor • Extended occupancy time • Mixed-air sensor input inputs • Frost low limit protection • Mixed-air setpoint • Two configurable digital inputs • Outside air lockout H/C • Economizer changeover temp • Fahrenheit or Celsius operation • No logo on thermostat • Outside air damper minimum • Permanent program retention • Room sensor calibration position (percent) • Temporary setpoints • Outside air calibration HEAT PUMP MODELS • Proportional plus integral control • Configurable heat pump O/B control • Cycles per hour for heating and • OSA lockout for HP emergency/comp
cooling heating THERMOSTATS & CONTROLLERS
SPECIFICATIONS Supply Voltage 20 to 30 VAC, 50/60 Hz Night setback clock Supply VA 2 VA Remote occupied override timer Display Two-line backlit LCD Control Output 1A relays, 30 VAC, SPST, 3A surge Controls Five menu-driven buttons: up, down, maximum menu, no, yes/scroll Auxiliary Contact Output 1A relay, 30 VAC, SPDT, follows occupied Thermostat Type 7-day programmable and non- schedule programmable models Mixed Air Output Proportional 0-10 VDC, 2K Ω minimum Optimal Start Progressive recovery enable/disable impedance (economizer model only) Heat Pump High/Lo Outside air lockout (emergency heating/ Control Type Proportional plus integral compressor heating) Dead Band Adjustable 2° to 4°F (1° to 2°C) Stages Available 1H/1C, 2H/2C, (3H/2C heat pump) 2H/2C Outside Air Lockout Limits + proportional mixed air economizer Heating 15° to 120°F (26° to 49°C), 5° increments Memory (schedule) Permanent, EEPROM Cooling -40° to 95°F (-40° to 35°C), 5° increments Clock Six-hour power-fail retention Low Limit Protection Enable/disable, heating on at 47°F System Switching Off/Auto/Cool/Heat (5 .5°C) Fan Switching On-continuous Power-up Delay Adjustable 10 to 120 seconds Auto-on demand Keypad Lockout 3 levels, (full, none, partial) Smart-(on/occupied, off/unoccupied) Cycles Per Hour Adjustable, heating 3-8; cooling, 3-4 Control Accuracy ±0 .9°F, (± 0 .5°C) at 70°F (21°C) Display Offset Adjustable ± 5°F, (±2 .5C), 1°F increments Setpoint Range LED Indicators Three green “on” (fan, cooling, heating) 21 Heating 40° to 90°F (4 .5° to 32°C) Wiring 18 AWG maximum, 22 AWG Cooling 54° to 100°F (12° to 37 .5°C) recommended Setpoint High/Low Limits Individually-adjustable heating / cooling Mounting Standard vertical 2" x 4" box Remote Sensor Enclosure UL FR1 flame retardant plastic Room Sensor Room sensor input auto-detected Color White 10K Type 2 thermistors Operating Temperature 32°F to 122°F (0° to 50°C) Outside Air Outside air input auto-detected Operating Humidity 0 to 95% RH (non-condensing) 10K Type 2 thermistors Dimensions 4 .94"H x 3 .38"W x 1 .13"D Mixed Air Mixed air input auto-detected (economizer (12 .5 x 8 .6 x 2 .9 cm) model only) 10K Type 2 thermistors Weight 0 .75 lb (0 .34 kg) Ancillary Inputs Two dry-contact digital inputs, applied for: Approvals UL Listed File #E234137, cUL, CE Service/status reminders RoHS Statement Ye s Filter alarm Warranty 1 year March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1327 THERMOSTATS & CONTROLLERS SINGLE AND MULTISTAGE PROGRAMMABLE AND NON-PROGRAMMABLE THERMOSTAT VT7600 SERIES
WIRING
TABLE 1. TERMINAL DESIGNATION BY THERMOSTAT MODEL THERMOSTAT MODEL VT7600 **Terminals and functions are not present on every thermostat VT7600A VT7600B VT7600H VT7652A VT7652B VT7656B VT7652H Terminal** Function** Y1 Energizes on a call for first stage cooling (first stage heating HP) Y2 Energizes on a call for second stage cooling (second stage heating HP) G NEWEnergizes fan in accordance with the selected fan mode ! RC 24 VAC from equipment transformer C 24 VAC (common) from equipment transformer H 24 VAC for heating stages (jumper to RC for single power systems) W1 Energizes on a call for first stage heating (third stage heating HP) W2 Energizes on a call for second stage heating O/B HP reversing valve configurable (O = on or B = on) AUX Configurable auxiliary output (follows schedule) D1 Configurable digital input D2 Configurable digital input EC 0 - 10 VDC economizer actuator output RS Remote room sensor Scom Sensor common OS Outdoor air sensor MS Mixed air sensor
VT7600 SERIES THERMOSTAT Internal relays and connections
VT Thermistor Electronics Sensor Inputs 0-10V
Y1 Y2 G RC C RH W1 W2 O/B AUX D1 D2 EC RS Scom OS MS
* Heat 1 Heat 2 Rev. Aux ACT. Cool 1 Cool 2 Fan Vlv.
Type 2 Type 2 Type 2 * Model 24 Model 24 Model 24
24V 24V Note: All outputs are * If using the same power source for the thermostat and heating loads, delete 24 VAC. * transformer T-2 and install a jumper across RC and RH, then wire W1 and W2 Note: Terminals are T-1 T-2 common to T1 ( ). thermostat-dependent. 24 VAC Thermostat Power See Table 1. (provided by installer) THERMOSTATS & CONTROLLERS
21
1328 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS SINGLE AND MULTISTAGE PROGRAMMABLE AND NON-PROGRAMMABLE THERMOSTAT VT7600 SERIES
ORDERING INFORMATION
MODEL THERMOSTAT TYPE VT7600 RTU controller, no local schedule VT7605 RTU + economizer controller, no local schedule VT7606 RTU + IAQ + economizer controller, no local schedule VT7607 RTU + humidity controller, no local schedule VT7652 RTU controller, local schedule VT7656 RTU + economizer controller, local schedule VT7657 RTU + humidity controller, local schedule OUTPUTS A 1H/1C (VT7600 and VT7652 only) NEW B 2H/2C (not av!ailable on VT7606) E 2H/2C + IAQ + economizer controller (VT7606 and VT7656 only) F 2C + analog heat controller (VT7600 and VT7652 only) H 3H/3C heatpump controller (VT7600 and VT7652 only) W 2H/2C + humidity + watersource heatpump controller (VT7600 and VT7652 cover) COVER 5000 Viconics logo 5031 Blank cover (no logo) 5500 PIR cover w/ Viconics logo 5531 PIR cover blank (no logo)
VT7605 B 5031 Example: VT7605B5031
RELATED PRODUCTS PAGE KTR24 Remote room thermistor sensor 1169 KTR24-LED-MB Remote room sensor with override button and LED 1169 ST-D24 10K Type 2 duct temperature themistor 1197
ST-FZ24-8 Averaging duct thermistor sensor, Type 2, Model 24 1234 THERMOSTATS & CONTROLLERS ST-O24 OSA thermistor sensor, Type 2, model 24, ±0.36°F (0.20°C) 1217
ACCESSORIES PAGE COV-HPUMP Cover, heat pump, no logo COV-MULTI Cover, conventional, no logo COV-SEN-O Cover, no logo, sensor with override TG511A1000 Thermostat guard- clear-medium size 1392
21
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1329 THERMOSTATS & CONTROLLERS HONEYWELL RESIDENTIAL THERMOSTATS, PROGRAMMABLE AND NON-PROGRAMMABLE T87, TH3000, AND TH4000 SERIES
DESCRIPTION The T87 Series is the latest design of the most recognized thermostat in the world . The T87 is an analog- or digital- display thermostat made for typical residential use on heating and cooling systems with either conventional heat or heat pump . The TH3000 Series is a digital thermostat for typical residential systems with either conventional heat or heat pump . The TH4000 Series is a five-day-plus- NEW! two programmable digital thermostat . It is also for typical residential systems with either conventional heat or heat pump .
T87N1000 T8775C1005 Non-programmable Non-programmable FEATURES • Five-year warranty • Traditional look for existing systems • Mercury-free design • Power-stealing design (T87, T8775) • 24 VAC power (TH3110, TH4110) • °F or °C selectable (digital types only) • Standard terminal designations
TH3110D1008 TH4110D1007 Non-programmable Programmable
SPECIFICATIONS Supply Voltage 24 VAC power-stealing (T87, T8775) Control Type Proportional plus integral (PI) 20 to 30 VAC or 750 mV 50/60 Hz, Clock 12-hour, ±1 minute/month, 10-year (TH3110, TH4110) battery (TH4110) Battery 2 AA alkaline, (TH3110, TH4110) Compressor Cycle Adjustable cycles per hour System Compatibility Conventional gas/oil and electric (T8775, TH3110, TH4110) (all models) Heat pump, (T8775, Minimum Compressor Off Time TH3110, TH4110) Five minutes, fixed (T8775), Digital Display Adjustable °F or °C, backlit adjustable (TH3110, TH4110) T8775 LCD, 0 .75 sq in Wiring 18 to 22 AWG, no shield required TH3110 LCD, 1 .32 sq in Night Setback Program Times TH4110 LCD, 1 .73 sq in 5+2-day, 4 periods/day (TH4110) Controls Fan, system, setpoint (programmable Night Setback Recovery on TH4110) Adaptive intelligent recovery
THERMOSTATS & CONTROLLERS T87 Dial and slide switches Color White TH3110, TH4110 2 to 5 soft keys and slide switches Operating Temperature Accuracy ±1°F (±0 .5°C), (T8775, TH3110, TH3110, TH4110 32° to 120°F (0° to 49°C) TH4110) ±2°F (±1°C), (T87N) T8775, T87N 40° to 110°F (4° to 43°C) 21 Switch Type 1A relay, (T87N, TH3110, TH4110) Operating Humidity 5% to 90% RH (all models) Electronic, (T8775) 0 02A. to 1 .5A Dimensions triac TH4110 3 8"H. x 5 .8"W x 1 .25"D Stages 1 heat and 1 cool, manually switched (9 .6 x 14 .7 x 3 .2 cm) System Switch Heat/Off/Cool T87 Round 3 .69" diameter x 1 .75" deep Fan Switch Auto/On (1 .5 x 0 .7 cm) Set Point Range Weight 0 75. lb, (0 .34 kg) Heat and Cool 40° to 90°F (4 .5° to 32°C) , (T87N) Warranty 5 years Heating Digital 40° to 90°F (4 .5° to 32°C), (T8775, TH3110, TH4110) Cooling Digital 50° to 99°F (10° to 37°C), (T8775, TH3110, TH4110) 1330 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS HONEYWELL RESIDENTIAL THERMOSTATS, PROGRAMMABLE AND NON-PROGRAMMABLE T87, TH3000, AND TH4000 SERIES
WIRING
TABLE 1. TERMINAL DESIGNATIONS BY THERMOSTAT MODEL RESIDENTIAL ROUND RESIDENTIAL DIGITAL DISPLAY ** Terminals and functions are not present on every thermostat T87N1000 T8775 TH3110 TH4110 Terminal** Thermostat Function** 1H/1C 1H/1C 1H/1C 1H/1C, Programmable • • C 24 VAC common (must come from cooling transformer), (TH3110, TH4110) O O O O B Change-over heating valve, (energized when in heating) • • • • R 24 VAC power for heating (typically jumpered with Rc for common powered systems) • • • • Rc 24 VAC power for cooling and single transformer systems O O O O O Changeover cooling valve, (energized when in cooling) NEW• • • • ! G Fan relay • • • • Y Cooling 1st stage conventional and 1st stage heating for heat pump (B terminal energized) • • • • W Heating 1st stage (conventional heat) O = Heat pump application only • = Conventional heating application
T87 SERIES THERMOSTAT TERMINATION TH SERIES THERMOSTAT TERMINATION
Thermostat H Electronics O Thermostat ** C Electronics
WYGBO Rc R WYGORc RBC
**
Heat Cool Fan HTG CLG Heat Cool Fan CLG HTG VLV VLV * VLV * VLV Conv. Conv. HP HP Conv. Conv. HP HP HP HP
24 VAC 24 VAC THERMOSTATS & CONTROLLERS 24 VAC
**Power Stealing CKT T1 T2 T1 T2 24 VAC TRANSFORMER 24 VAC TRANSFORMER (provided by others) (provided by others)
Internal thermostat connections
Wiring if 2nd transformer needed (T2) *Install jumper if a single transformer is used (this is most of the time).
Conv. Conventional application HP Heat pump application
ORDERING INFORMATION MODEL DESCRIPTION T8775C1005 Round digital thermostat 1H/1C (conventional or heat pump), system (H/O/C), fan auto/on T87N1000 Round analog thermostat 1H/1C (conventional or heat pump), system (H/O/C), fan auto/on 21 TH3110D1008 Digital thermostat 1H/1C (conventional or heat pump), system (H/O/C), fan auto/on TH4110D1007 Programmable (5+2 day) thermostat 1H/1C (conventional or heat pump), system (H/O/C), fan auto/on
ACCESSORIES PAGE 50000066-001 Round decorative cover plate, 5.5" diameter (T87) 50002883-001 Cover goof plate, 6"H x 8.3"W (TH6000 Series, TH5000 Series) 1391 50010944-001 Range stops for T87 thermostats
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1331 COMPRESSOR CONTACTOR
3 FAN RELAY 1 C W1 L1 (HOT) G G2 Y G3 1 3 L1 C W1 24 VAC O/B S1 (HOT) G G2 L2 RC S2 Y G3 2 24 VAC R O/B S1 L2 COOLING RC S2 TRANSFORMER 2 COMPRESSOR CONTACTOR INDOOR TEMPERATURE R SENSOR/REMOTE L1 FAN RELAY SETBACK (HOT) 1 INDOOR TEMPERATURE SENSOR/REMOTE 24 VAC HEAT RELAY HEAT RELAY SETBACK L2 HEATING 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD TRANSFORMER PROTECTION AS REQUIRED. 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD 2 FACTORY INSTALLED JUMPER. PROTECTION AS REQUIRED.
3 WHEN USING BATTERIES, THE 24V COMMON CONNECTION 2 REMOVE FACTORY INSTALLED JUMPER. IS OPTIONAL. 3 WHEN USING BATTERIES, THE 24V COMMON CONNECTION IS OPTIONAL. WHEN USED, THE COMMON MUST CONNECT Typical wiring of single transformer TO THE COOLING TRANSFORMER SECONDARY. 1H/1C system. Typical hookup of dual transformer 1H/1C system.
COMPRESSOR CONTACTOR
3 FAN RELAY 1 C W1 L1 (HOT) G G2 3 3 3 Y 1 G3 C W11 C 1 C W1 L1 L1 W1 24 VAC G L1 O/B (HOT) S1 (HOT)G2 G (HOT) G G2 G2 L2 Y G3 Y G3 RC S2 Y G3 2 24 VAC O/B 24 VAC S1 24 VAC O/B S1 R O/B L2 RC S2 L2 RC S1 S2 2 L2 2 R COOLING RC R S2 TRANSFORMER 2 COMPRESSOR CONTACTOR INDOOR TEMPERATURE R SENSOR/REMOTE HEAT RELAY L1 TWO PIPE HEAT/COOL RELAY FAN RELAY SETBACK (HOT) 1 INDOOR TEMPERATURE COOLING RELAY INDOOR TEMPERATURE INDOORLOW TEMPERA FAN RELATUREY SENSOR/REMOTE SENSOR/REMOTE SENSOR/REMOTE SETBACK/CHANGEOVER LOW FAN RELAY SETBACK 24 VAC PIPE SENSOR HEAT RELAY HEAT RELAY MEDIUMSETBACK FAN RELAY L2 MEDIUM FAN RELAY HEATING AUXILIARY HEAT RELAY 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD HIGH TRANSFORMEFAN RELAY R HIGH FAN RELAY PROTECTIONTHERMOSTATS AS REQUIRED. & CONTROLLERS 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD1 POWER SUPPLY. PROVIDE DISCONNEC1 POWERT MEANS SUPPL ANDY. PROVIDE OVERLOAD DISCONNECT MEANS AND OVERLOAD 2 FACTORY INSTALLED JUMPER. PROTECTION AS REQUIRED. PROTECTION AS REQUIRED. PROTECTION AS REQUIRED. MULTIPRO™ MULTISPEED2 FACTOR ANDY INSTALLED MULTIPURPOSE JUMPER. THERMOSTAT 2 FACTORY INSTALLED JUMPER. 3 WHEN USING BATTERIES, THE 24V COMMON CONNECTION 2 REMOVE FACTORY INSTALLED JUMPER. IS OPTIONALTB7100A100. MULTIPRO™3 WHEN SERIES USING BATTERIES, THE 24V COMMON CONNECTION IS 3 WHEN USING BATTERIES, THE 24V COMMON CONNECTION IS OPTIONAL. 3 WHEN USING BATTERIES, THE 24V COMMONOPTIONAL. CONNECTION IS OPTIONAL. WHEN USED, THE COMMON MUST CONNECT Typical wiring of single transformer Typical wiring of 4 pipe fan coil. TO THE COOLING TRANSFORMERTy SECONDApical wiringRY. of 2 pipe fan coil with reheat. 1H/1C system. DESCRIPTION Typical hookup of dual transformer The TB7100A1000 MultiPRO™ Multispeed and 1H/1C system. Multipurpose Thermostat is an effortless, seven-day programmable or nonprogrammable thermostat that provides L universal system compatibility, precise comfort control(HOT) and is 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD 3 PROTECTION AS REQUIRED. easy-to-program . 24 VAC C W1 L2 G G2 2 FACTORY INSTALLED JUMPER. 1 Y G3 3 WHEN USING BATTERIES, THE 24V COMMON CONNECTION 3 4 O/B S1 IS3 OPTIONAL. FEATURES1 C W1 RC 1 S2 C W1 L1 NEW2 L1 4 "O/B" TERMINAL SET TO CONTRO!L AS EITHER "O" OR "B" R (HOT) G G2 (HOT) G IN THE INSTALLER SETUP. G2 • Large, clear backlitY display with backlightG3 Y G3 5 OPTIONAL INDOOR REMOTE SENSOR OR REMOTE SETBACK. CHANGEOVER VALVE INDOOR TEMPERATURE • Menu-driven24 VAC programmingO/B S1 24 VAC O/B WIRES MUST HAVE A CABLES1 SEPARATE FROM THE THERMOSTAT SENSOR/REMOTE COMPRESSOR CONTACTOR CABLE. • SpeedyL2 same-scheduleRC programming, noS2 need to copy L2 SETBACK 5 RC S2 2 2 multiple days R FAN RELAY R AUXILIARY HEAT RELAY Typical hookup of single-stage heat pump • Programmable or non-programmable modes TB7100A100with auxiliary heat (2H/1C). HEAT RELAY TWO PIPE HEAT/COOL RELAY • Remote setback input for occupancy sensors or INDOOR TEMPERATURE timeclocksCOOLING RELAY INDOOR TEMPERATURE TR21/TR21-A WIRINGLOW FAN RELAY SENSOR/REMOTE SENSOR/REMOTE SETBACK/CHANGEOVER • Real-time clockLOW FA Nkeeps RELAY time during powerSETBACK failures and SUBBASE PIPE SENSOR MEDIUM FAN RELAY automatically updates to daylight savings S1 S2 MEDIUM FAN RELAY AUXILIARY HEAT RELAY TR21 HIGH FAN RELAY HIGH FAN RELAY
APPLICATION1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD 1T POWERT SUPPLY.T4 PROVIDET3 DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. PROTECTION AS REQUIRED. • 1H/1C conventional 2 FACTORY INSTALLED JUMPER. 2 FACTORY INSTALLED JUMPER. • Up to 2H/1C heat pump 1 • 4-pipe3 WHEN fanUSING coil BATTERIES, (three THE fan 24V speeds)COMMON CONNECTION IS 3 WHEN USING BATTERIES,TR21-A THE 24V COMMON CONNECTION IS OPTIONAL. OPTIONAL. • 2-pipe fan coil (three fan speeds) TR21 1 THE TR21-A IS A 10K OHM SENSOR. • 2-pipeTypical fan coilwiring with of 4Auxiliary pipe fan Heatcoil. (3 fan speeds) TypiTTcal wiring of 2 pipe fan coil with reheat. • PTAC (Hi, Lo fan speed) Wiring two TR21 (20K ohm) Sensors and one TR21-A (10K ohm) Sensor to provide a temperature averaging network
WIRING - HEAT PUMP WITH AUXILIARY HEAT
L (HOT) 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD 3 PROTECTION AS REQUIRED. 24 VAC C W1 L2 G G2 2 FACTORY INSTALLED JUMPER. 1 Y G3 3 WHEN USING BATTERIES, THE 24V COMMON CONNECTION 4 O/B S1 IS OPTIONAL. RC S2 R 2 4 "O/B" TERMINAL SET TO CONTROL AS EITHER "O" OR "B" IN THE INSTALLER SETUP.
5 OPTIONAL INDOOR REMOTE SENSOR OR REMOTE SETBACK. CHANGEOVER VALVE INDOOR TEMPERATURE WIRES MUST HAVE A CABLE SEPARATE FROM THE THERMOSTAT SENSOR/REMOTE COMPRESSOR CONTACTOR CABLE. SETBACK 5 FAN RELAY AUXILIARY HEAT RELAY Typical hookup of single-stage heat pump with auxiliary heat (2H/1C). THERMOSTATS & CONTROLLERS SPECIFICATIONS
Supply Voltage 20-30 VAC, 50/60 Hz SUBBASE Display Accuracy ±1°F (±0 .5°C) 21 Battery Optional, 2-AA S1 S2 Changeover Manual or Auto changeover Contact Ratings 0 .02- 1 .0A, 0 .60A maximum current selectable for fan terminalsTR21 System Settings Heat-Off-Cool-Auto Memory 10 year Fan Setting Auto-On T T T4 T3 Remote Sensor Indoor/Setback/Changeover Fan Speeds Low, Medium, High Accuracy ±1°F (0 .5°C), system dependent Dimensions 3 75"H. x 6 .0"W x 1 .375"D Output SPST relays 1 (9 .5 x 15 .2 x 3 .5 cm) Control Proportional plus Integral (PI) TR21-A Weight 1 0. lb (0 .45kg) Deadband Adjustable, 2°/9°F,TR21 (1 5°/5°C). Warranty 2 years
Setpoint/Setback Adjustable with programmable limits 1 THE TR21-A IS A 10K OHM SENSOR. Heating 40 to 90°F (10 toTT 32°C) Cooling 50 to 99°F (10 to 37°C) Wiring two TR21 (20K ohm) Sensors and one TR21-A (10K ohm) Sensor to provide a temperature averaging network 1332 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS MULTIPRO™ MULTISPEED AND MULTIPURPOSE THERMOSTAT TB7100A100 MULTIPRO™ SERIES
WIRING - CONVENTIONAL
COMPRESSOR CONTACTOR COMPRESSOR CONTACTOR 3 FAN RELAY 1 C W1 FAN RELAY L1 3 1 GC W1 L1(HOT) G2 (HOT) GY G3G2 1 3 L1 C W1 24 VAC Y G3 1 C 3 O/B S1 L1(HOT) G W1G2 L2 24 VAC O/B S1 (HOT) G RC S2 Y G3G2 L2 RC 2 S2 24 VAC Y R O/B G3S1 R 2 24 VAL2C O/BRC S1 L2COOLIN G S2 TRANSFORMER RC 2 COMPRESSOR CONTACTOR INDOOR TEMPERATURE COOLING R S2 TRANSFORMER R 2 COMPRESSOR CONTACTOR INDOORSENSOR/REMOTE TEMPERATURE L1 1 FAN RELAY SENSOR/REMOTESETBACK L1(HOT) INDOOR TEMPERATURE NEWFAN RELAY SETBACK! (HOT) 1 INDOORSENSOR/REMOT TEMPERATUREE 24 VAC HEAT RELAY HEAT RELAY SENSOR/REMOTSETBACK E L2 24 VAC HEAT RELAY HEAT RELAY SETBACK L2HEATING 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD TRANSFORMEHEATING R 1 POWERPROTECTION SUPP LYAS. REQUIRED.PROVIDE DISCONNECT MEANS AND OVERLOAD TRANSFORMER PROTECTION AS REQUIRED. 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD 2 FACTORY INSTALLED JUMPER. 1 POWERPROTECTION SUPP LYAS. REQUIRED.PROVIDE DISCONNEC T MEANS AND OVERLOAD 2 FACTORY INSTALLED JUMPER. PROTECTION AS REQUIRED. 3 WHEN USING BATTERIES, THE 24V COMMON CONNECTION 2 REMOVE FACTORY INSTALLED JUMPER. 3 WHENIS OPTIONAL USING. BATTERIES, THE 24V COMMON CONNECTION 2 REMOVE FACTORY INSTALLED JUMPER. IS OPTIONAL. 3 WHEN USING BATTERIES, THE 24V COMMON CONNECTION 3 WHENIS OPTIONAL. USING BAWHENTTERIES, USED, THE THE 24V COMMON COMMON MUST CONNECTION CONNECT Typical wiring of single transformer ISTO OPTIONAL. THE COOLING WHEN TRANSFORMER USED, THE COMMON SECONDA MUSTRY. CONNECT 1H/1CTypical system wiring. of single transformer TO THE COOLING TRANSFORMER SECONDARY. 1H/1C system. Typical hookup of dual transformer 1H/1CTypical system hookup. of dual transformer 1H/1C system.
WIRING - FAN COIL
3 3 THERMOSTATS & CONTROLLERS 1 C 3 W1 1 C 3 W1 L1 L1 1 GC W1 1 GC W1 L1(HOT ) G2 L1(HOT ) G2 (HOT) GY G3G2 (HOT) GY G3G2 24 VAC O/YB G3S1 24 VAC O/YB G3S1 24 VAC 24 VAC L2 O/RCB S2S1 L2 O/RCB S2S1 L2 RCR 2 S2 L2 RCR 2 S2 R 2 R 2
HEAT RELAY TWO PIPE HEAT/COOL RELAY HEAT RELAY TWO PIPE HEAT/COOL RELAY INDOOR TEMPERATURE COOLING RELAY INDOOR TEMPERATURE LOW FAN RELAY INDOORSENSOR/REMOTE TEMPERATURE COOLING RELAY INDOORSENSOR/REMOTE TEMPERATURE LOW FAN RELAY SETBACK/CHANGEOVERSENSOR/REMOTE LOW FAN RELAY SENSOR/REMOTESETBACK SETBACK/CHANGEOVERPIPE SENSOR MEDIUM FAN RELAY LOW FAN RELAY SETBACK PIPE SENSOR MEDIUM FAN RELAY MEDIUM FAN RELAY AUXILIARY HEAT RELAY MEDIUM FAN RELAY HIGH FAN RELAY AUXILIARY HEAT RELAY HIGH FAN RELAY HIGH FAN RELAY HIGH FAN RELAY 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD 1 POWERPROTECTION SUPPL ASY. REQUIRED.PROVIDE DISCONNECT MEANS AND OVERLOAD 1 POWERPROTECTION SUPPL ASY. REQUIRED.PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. PROTECTION AS REQUIRED. 2 FACTORY INSTALLED JUMPER. 2 FACTORY INSTALLED JUMPER. 2 FACTORY INSTALLED JUMPER. 2 FACTORY INSTALLED JUMPER. 3 WHEN USING BATTERIES, THE 24V COMMON CONNECTION IS 3 WHEN USING BATTERIES, THE 24V COMMON CONNECTION IS 3 WHENOPTIONAL. USING BATTERIES, THE 24V COMMON CONNECTION IS 3 OPTIONAL.WHEN USING BATTERIES, THE 24V COMMON CONNECTION IS OPTIONAL. OPTIONAL. Typical wiring of 4 pipe fan coil. Typical wiring of 2 pipe fan coil with reheat. Typical wiring of 4 pipe fan coil. Typical wiring of 2 pipe fan coil with reheat. 21 ORDERING INFORMATION
MODEL DESCRIPTION L TB7100A1000 Multispeed and multipurpose thermostat L(HOT) 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD (HOT) 3 1 POWERPROTECTION SUPP LYAS. PROVIDEREQUIRED. DISCONNECT MEANS AND OVERLOAD 24 VAC C 3 W1 PROTECTION AS REQUIRED. C L2 24 VAC G W1G2ACCESSORIES 2 FACTORY INSTALLED JUMPER. L2 1 GY G2 2 FACTORY INSTALLED JUMPER. G3 3 WHEN USING BATTERIES, THE 24V COMMON CONNECTION 1 C7189U1005O/YB Remote indoor thermistor sensor: 10K ohm NTC (TB7220) 4 G3S1 3 ISWHEN OPTIONAL USING. BATTERIES, THE 24V COMMON CONNECTION O/B TR214 RC Wall mountS2S1 remote indoor sensor:IS OPTIONAL 20K ohm. NTC (Type 42) TR21-ARCR 2 Wall mountS2 remote indoor sensor:4 "O/B" 10K TERMINAL ohm NTCSET TO (use CONTRO for averagingL AS EITHER only) "O" OR "B" R 2 4 "O/B"IN THE TERMINAL INSTALLER SET SETUP TO CONTRO. L AS EITHER "O" OR "B" IN THE INSTALLER SETUP. 5 OPTIONAL INDOOR REMOTE SENSOR OR REMOTE SETBACK. CHANGEOVER VALVE INDOOR TEMPERATURE 5 WIRESOPTIONA MUSTL INDOOR HAVE AREMOTE CABLE SESENSORPARATE OR FROM REMOTE THE THERMOSSETBACK.TAT CHANGEOVER VALVE INDOORSENSOR/REMOTE TEMPERATURE COMPRESSOR CONTACTOR WIRESCABLE. MUST HAVE A CABLE SEPARATE FROM THE THERMOSTAT SENSOR/REMOTESETBACK 5 COMPRESSOR CONTACTOR 5 CABLE. March 2014 FAN RELAY SETBACK WE MAKE IT EASY. kele.com 888-397-5353 USA FAN RELAY AUXILIARY HEAT RELAY Typical hookup of single-stage heat pump 1333 AUXILIARY HEAT RELAY Tywithpical auxiliary hookup heat of single-s(2H/1C).tage heat pump with auxiliary heat (2H/1C).
SUBBASE SUBBASE S1 S2 S1 S2 TR21 TR21 T T T4 T3 T T T4 T3
1 TR21-1 A TR21-A TR21 TR21 1 THE TR21-A IS A 10K OHM SENSOR. TT 1 THE TR21-A IS A 10K OHM SENSOR. TT Wiring two TR21 (20K ohm) Sensors and one TRWiring21-A tw (10Ko TR21 ohm) (20K Sensor ohm) to Sensors provide anda temperature one averagingTR21-A (10K networ ohm)k Sensor to provide a temperature averaging network THERMOSTATS & CONTROLLERS FOCUSPRO™ RESIDENTIAL AND LIGHT COMMERCIAL THERMOSTATS TH5000, TH6000, TB7000 SERIES
DESCRIPTION The TH5000 Series is a single or multi-stage digital thermostat made for typical residential heating and cooling systems with either conventional heat or heat pump . The TH6000 Series is a five-day-plus-two programmable thermostat . It is available in single- or multi-stage models for typical residential H/C systems with either conventional heat or heat pump . The TB7220 is a seven-day programmable thermostat made for light commercial applications . The NEWTH5220D1029 ! TB7220 is multi-stage, for conventional heat or heat pump with additional algorithms to accommodate larger spaces Non-Programmable TH6220D1028 and larger equipment in commercial applications . Algorithms Programmable include configurable recovery ramp and pre-occupancy purge cycle . It also has remote sensor capability .
FEATURES • Five-year warranty • Large digital backlit display • Auto or manual heat-cool operation • Relay switch type • °F or °C selectable TB7220U1012 TH5110D1022 • Standard terminal designations Commercial Programmable Non-Programmable
SPECIFICATIONS Supply Voltage 20 to 30 VAC or 750 mV, 50/60 Hz Remote Sensor 10K thermistor, TB7220 only Battery Optional, 2-AA Clock ±1 minute/month, 10-year battery System Compatibility Conventional and heat pump TH6000, TB7220 only Display 2 .98 to 5 09. sq in, model dependent DST Auto Adjust Yes, TB7220 only (°F or °C) Compressor Cycle Adjustable cycles per hour and Display Offset -3° to +3°F (-3° to +3°C), TB7220 minimum off time only Purge Duration Adjustable, TB7220 only Controls 4 to 6 soft keys, model dependent Heat Pump Lockout Adjustable, TB7220 only Keypad Lockout Configurable, TB7220 only Remote Sensors Two, indoor and outdoor, TB7220 Sensor Type Thermistor only Accuracy ±1°F (±0 .5°C) Wiring 18 to 22 AWG, no shield required Switch Type Y1,Y2,W,E: 1A relay Night Setback Program Times W2,G,O/B,L,A: 0 .5A relay TB7220 7-day, 2 or 4 periods/day Stages & Control See terminal designation table TH6220 5+2- or 5+1+1-day, 4 periods/day Memory 10 years, then AA batteries required Color White System Switch Selectable, Heat/Off/Cool/Auto, plus Operating Temperature 32° to 120°F (0° to 49°C) THERMOSTATS & CONTROLLERS emergency heat on TH5220 and TB7220 0° to 120°F (-18° to 49°C) TH6220 Operating Humidity 0 to 90% RH non-condensing Fan Switch Auto/On Dimensions Setpoint Rrange TH5110 3 42"H. x 4 .5"W x 1 .3"D 21 Heating 40° to 90°F (4 .5° to 32°C) (8 .7 x 11 .4 x 3 .3 cm) Cooling 50° to 99°F (10° to 37°C) TH6000, TH5220 3 56"H. x 5 .81"W x 1 .5"D Setpoint Limits Full setpoint span (TH5220, TH6220, (9 .0 x 14 .7 x 3 .8 cm) TB7220 only) TB7220 3 75"H. x 6 .0"W x 1 .4"D Control Type Proportional plus integral (PI) (9 .5 x 15 .2 x 3 .6 cm) TB7220 tuned for larger spaces/ Weight 0 75. lb (0 .34 kg) equipment Warranty 5 years, all except TB7220 (2 years) Deadband 3°F (1 .7°C) fixed (all except TB7220) Adjustable 2° to 9°F (1 1°. to 5°C), TB7220 only
1334 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS FOCUSPRO™ RESIDENTIAL AND LIGHT COMMERCIAL THERMOSTATS TH5000, TH6000, TB7000 SERIES
WIRING
TABLE 1. TERMINAL DESIGNATIONS BY THERMOSTAT MODEL RESIDENTIAL RESIDENTIAL PROGRAMMABLE THERMOSTATS THERMOSTATS COMMERCIAL ** Terminals and functions are not present on every thermostat TH6110 TH6220 TB7220 TH5110 TH5220 1H/1C, 2H/2C, 3H/2C, 1H/1C 2H/2C programmable programmable programmable Terminal** Thermostat Function** •• ••• Rc 24 VAC power for cooling, for a split heating-cooling system •• ••• R 24 VAC power for heating (typically jumpered with Rc for common-powered systems) •• ••• Y1 Cooling 1st stage NEW•• ••!• C 24 VAC common (must come from cooling transformer) •• ••• W1 Heating 1st stage OO OOOO/B Changeover valve (replaces W1 for heat pump) •• ••• G Fan relay ••• W2 Heating 2nd stage (TH5220, TH6220, TB7220) OOAux 2nd stage heat for heat pump application (TH5220, TH6220, replaces W2 for HP) ••• Y2 Cooling 2nd stage (TH5220, TH6220, TB7220) OO E Emergency heat relay (TH5220, TH6220, replaces Y2 for HP) •• L Emergency heat enabled annunciate (TH5220, TH6220) • A Economizer or time-of-day output powered by the R terminal (TB7220) • S1 Remote sensor 1 set for room or OSA (TB7220) • S2 Remote sensor 2 set for room or OSA (TB7220) O = Heat pump application only • = Conventional heating application TH and TB SERIES THERMOSTAT TERMINATION
Internal Relays THERMOSTATS & CONTROLLERS and Connections Thermostat Electronics
Y A W O W S2 S1 ALE U GCY1 R Rc 2 X 2 B 1
Cool * T T ECON. EM. H. EM Cool Heat Fan Rev. Heat 1 TOD Enable Heat 2 2 VLV 1
24 VAC24 VAC
Remote Sensors HP Conv. Conv.CHP onv. T1 T2 * Factory Jumper (remove if heating transformer is used). Wiring if Separate Heating Transformer is Needed. Internal Thermostat Connections Conv. Conventional Heating HP Heat Pump Heating ECON/TOD Economizer Enable or Time of Day Output
ORDERING INFORMATION MODEL DESCRIPTION 21 TH5110D1022 Digital thermostat 1H/1C (HP), system (H/O/C/A), fan auto/on TH5220D1029 Digital thermostat 2H/2C (HP), system (H/O/C/A/Em), fan auto/on TH6110D1021 Programmable (5-2 day) thermostat 1H/1C (HP), system (H/O/C/A), fan auto/on TH6220D1028 Programmable (5-2 day) thermostat 2H/2C (2H/1C HP), system (H/O/C/A/Em), fan auto/on TB7220U1012 Programmable (7-day) thermostat 3H/2C (HP), system (H/O/C/A), fan auto/on
RELATED PRODUCTS 32003796-001 Cover goof plate, 6"H x 8.3"W (TH7220) 50002883-001 Cover goof plate, 6"H x 8.3"W (TH6000 Series, TH5000 Series) C7089U1006 Outdoor sensor with mounting clip (TB7220) C7189U1005 Remote indoor thermistor sensor: 10K ohm NTC (TB7220)
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1335 THERMOSTATS & CONTROLLERS VISIONPRO™ PROGRAMMABLE THERMOSTAT TH8000 SERIES, MODEL TB8220
DESCRIPTION The Vision Pro™ T_8000 is a 7-day programmable thermostat designed for universal system compatibility and is easy to program for precise comfort control . Programming is done using the large clear backlit display by just touching the screen and following the menu . The thermostat is configurable for system type (Conventional/Heat pump), system stages (1H/1C through 3H/2C), Fan control (electric/ gas), with some models offering humidity control features . NEW! The T_8000 is powered by 24VAC and/or 3 AAA batteries for time and program retention .
APPLICATION Designed specifically for low-voltage control requiring time scheduled occupied-unoccupied control . Ideal for roof top units (small business or retail), homes, condos, cottages, and any packaged AHU operation . TH8110U1003
FEATURES • Five-year warranty • 10-year built-in memory retention • Screen lockout (partial/total) • Scheduling or non-scheduling • Base included • Auto daylight savings time • Large backlit touch screen display • Remote sensor option (room or • Service reminders (TH) (filter, UV • Menu touch screen interaction OSA) lamp, humidity pad) • Fan switching (touch screen) • Seven-day schedule or manual • 30-day low battery indication • System switching (touch screen) • 12- or 24-hour clock • Clean screen timer • Setpoint and configuration (touch • 2 or 4 occupied/unoccupied periods • Change over (manual or auto) screen) per day • SP hold permanent or time out (TH) • 1H/1C or 2H/2C or 3H/2C HP • Adaptive intelligent recovery • Holiday and override (TB) • Heat pump O = on or B = on • Proportional + Integral control • Individual setpoint range stops H/C • Emergency heat (electric/gas) • Integral adjustment (Fast, Norm, • Extended fan run time • De-humidification control models Slow) • Temperature display offset ±3℉ • Fahrenheit or Celsius operation • Minimum compressor off timer • Installer “test function” • 24 VAC and/or 3-AAA batteries • Cycles/hour for cooling and heating • Adjustable H/C deadband • OSA heat pump compressor lockout • Economizer/scheduled contact (TB)
SPECIFICATIONS Supply Voltage 20-30 VAC, 50/60 Hz Touch Screen Controls Battery Optional, 3-AAA Setpoints Up/Down Supply Current H/C - 1 .0A, fan - 0 6A. System Heat/Off/Cool/Auto Memory 10 years, then 3-AAA batteries Fan control On/Auto/Circ (TH), On/Auto (TB) required Schedule 7 day, 2 or 4 periods Sensor Type Built-in 10K thermistor Hold (TH) Permanent or time out
THERMOSTATS & CONTROLLERS Remote Sensor Room or OSA (accessory required) Holiday (TB) Time out by days Accuracy ±1°F (0 .5°C), system dependent Clock 12-hour or 24-hour, ±1 min ./month Outputs SPST relays Screen °F/°C, backlight Control Proportional plus Integral (PI) Override Occupied time out Dead-band Adjustable, 2°/9°F, (1 5°/5°C). Menu Service set up, over 40 parameters 21 Setpoint/Setback Adjustable with programmable limits Enclosure White plastic, indoors only Heating 40 to 90°F (10 to 32°C) Color Premier white Cooling 50 to 99°F (10 to 37°C) Wiring Terminals for 18 AWG wire RH 40 to 80%, (TH8321) Operating Temperature 0° to 120°F (-18° to 49°C) Keypad Lockout Unlocked, locked completely, or Operating Humidity 0 to 90% RH (non-condensing) locked except setpoint Mounting Horizontal with base included Display 3 .5" x 2 .5" backlit touch screen, Dimensions 4 56"H. x 6 .0"W x 1 .37"D, temperature, humidity (TH8321), (11 .6 x 15 24. x 3 .5 cm) system, fan, time, day, setpoint, Weight 1 1. lb (0 .5 kg) service reminders (TH), OSA temp if Approvals UL, cUL, California Title 24 (TB), wired and ADA compliant Display Offset ±3°F (1 .5°C), in 1°F (0 .5°C) Warranty 5 years increments 1336 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS VISIONPRO™ PROGRAMMABLE THERMOSTAT TH8000 SERIES, MODEL TB8220
WIRING THERMOSTAT KEYS AND DISPLAY
Heat Pump Heating, cooling, or anti-cycle wait status Conventional Current inside temperature Current setpoint temperature SYSTEM Selects HEAT/OFF/COOL/AUTO DOWN ARROW Y2 Y2 RC RC Jumper Lowers temperature setting Supplied FAN L R R UP ARROW (remove as Selects ON/AUTO/CIRC (TH) (A) E (A) W O/B needed) Selects ON/AUTO(TB) Raises temperature setting (W1) AUX W2 Y Y Day of week Touch screen function/status S1 S1 G G LED lamp L TUE S2 S2 C C Screen Locked
FAN Screw Terminals Inside Set To NEWTB8220 only for 18 AWG ! AUTO
Cool ON SYSTEM Following Schedule TERMINAL DESIGNATIONS HEAT Outside Designator Typical connection AM Air AUX Auxiliary heat relay (heat pump TH) C Common connection E, (A) Emergency heat, (time-of-day or economizer) DONE SCHED HOLD CLOCK SCREEN MORE OVERRIDE or (TB) G Fan relay HOLIDAY L 24 VAC LED light output (externally switched) PROGRAM SCHED CLOCK MORE O/B Changeover valve (heat pump) ENTER Enters Sets the Shows additional Scheduling time forward accessory and S1, S2 Indoor or outside air sensor termination Mode or back maintenance options R 24 VAC system or heat transformer HOLIDAY (TB) HOLD (TH) SCREEN RC 24 VAC cooling transformer Sets Holiday Sets a Permanent Hold Locks out the screen W First stage heating Un-Occ Time-Out and Activities Vacation Hold to allow for cleaning W1 Second stage heating (heat pump TB) TIME FOLLOWING SCHEDULE W2 Second stage heating Display current time of day, Shows the thermostat is following
override hold time remaining, or the programmed schedule THERMOSTATS & CONTROLLERS Y First stage cooling number of vacation or holiday days remaining RECOVERY Y2 Second stage cooling During occupied warm-up or cool-down Note: Not all terminals shown are used on all models . Be sure to use the conventional OR heat pump terminals, NOT both . ORDERING INFORMATION
INSTALLATION / MOUNTING MODEL DESCRIPTION TB8220U1003 24V commercial, seven-day The base plate is mounted directly to the wall or 2" x 4" programmable 2H/2C or 3H/2C HP horizontal or vertical back box . Use 18 AWG wire and w/system and fan switch terminals shown above . Position thermostat over the base TH8110U1003 24V residential, 1H/1C or HP seven- plate and push onto pins . No leveling required . day programmable thermostat w/ system and fan switch TH8320U1008 24V residential, 2H/2C or 3H/2C HP seven-day programmable thermostat GENERAL CONTROL SEQUENCE with system and fan switch The occupied status is time programmed to change the TH8321U1006 24V residential, 2H/2C or 3H/2C HP occupied and unoccupied setpoints . The thermostat seven-day programmable thermostat control uses the setpoint as displayed using a PI control with system and fan switch and 21 of single or multiple stages of heating and cooling humidity equipment . The fan is controlled by demand in the AUTO mode for H/C, with delay fan off as programmed by the installer . In the ON mode the fan is continuous on and in RELATED PRODUCTS the CIRC mode (TH only) the fan runs by demand plus PRODUCTS an additional random circulation amount up to 35% of the 209651A Wall adaptor plate 7.37” x 5.75” scheduled occupied time . System control is selectable C7089U1006 Outdoor sensor with mounting clip for Heat/Off/Cool/Auto . Automatic engages the H/C (TB7220) automatically with an adjustable deadband between the C7189U1005 Remote indoor thermistor sensor: H/C setpoints with control status displayed on the LCD 10K Ω NTC (TB7220) as Heating On or Cooling On, and a wait indicator during anti-cycle control . March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1337 THERMOSTATS & CONTROLLERS RESIDENTIAL AND LIGHT COMMERCIAL THERMOSTATS 1F80 SERIES
DESCRIPTION The 1F80 Series thermostats come with a wide variety of options . These versatile thermostats can be used for residential and light commercial applications with both programmable and non-programmable options . There are also choices of displays including the White Rodgers Blue™ digital display as well as the classic green display . With universal, multi-stage, single stage, and heat pump options NEW! the right choice is easy to find in this family of thermostats .
1F80-0471 1F86-EZ-0251 FEATURES • 2" or 4" Blue™ or classic digital display (classic only available in 2") • Choice of battery powered, dual power or hardwired models • Fossil fuel or electric heat compatible • Permanent Program retention during power loss • Configuration menu allows keypad selection of options • Selectable Celsius or Fahrenheit temperature display • Air filter change indicator option • Keypad lockout and setpoint temperature limit options 1F86-344
SPECIFICATIONS Supply Voltage 0 to 30 VAC, 50/60 Hz or DC 0 .05 to Dimensions 1 .5 Amps (load per terminal) 1F87-361, 1F80-361, 1F86-344, 1F85-277 1 .5 Amps maximum load (all 6 1"W. x 3 .8"H x 1 .1"D terminals combined) (15 .5 x 9 .7 x 2 .8 cm) Setpoint Temperature Range 1F80-0471,1F80ST-0471, 1F86-0471, 1F86ST-0471, 45° to 90°F (7° to 32°C) 1F86EZ-0251 Rated Differential 0 .4° to 1 .7°F 4 4"W. x 3 .4"H x 1 .2"D Standard Systems Gas, oil, electric, heat pump, millivolt (11 .2 x 8 .6 x 3 .04 cm) systems, 2- or 3-wire hydronic zone 1F82-0261,1F80-0261,1F80-0224, 1F89-0211, 1F86-0244, valve 1F82-261, 1F89-211, 1F89EZ-0251 Thermal Specifications (dependent 4 8"W. x 3 .8"H x 1 .5"D on model selected) (12 .2 x 9 .7 x 3 .8 cm) Operating Ambient Temperature 1F85-0422, 1F83-0471, 1F83-0422, 1F85-0477, 32° to 105°F (0° to 40°C) 1F85ST-0422
THERMOSTATS & CONTROLLERS Operating Humidity Range 5 1"W. x 3 .9"H x 1 .2"D 90% non-condensing maximum (12 .9 x 9 .9 x 3 .05 cm) Weight 0 75. lb (0 .34 kg) approximate average 21 Warranty 1 year
1338 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS RESIDENTIAL AND LIGHT COMMERCIAL THERMOSTATS 1F80 SERIES
WIRING
Jumper
L O/B Y Y2 W/E W2 G RH RC C
System
Single O Blower/ No Circulator Stage 1 Fault Energized Constantly No Output * Common connection Output Fan Energized (SS1) Indicator in Cool Mode Optional* required for fault or Heat on Call for 24 Volt 24 Volt or Cool Mode 24 Volt Mode Cool (and (Hot) (Hot) malfunction indication. System 1st Stage (Com- B 1st Stage Heat if Heat Cool Multi- Malfunction Cool Heat Mode mon) NEWStage 2 Energized Constantly !Mode configured Switch 2nd Stage (MS2) in Heat, Off, 2nd for Electric Emergency Stage Heat) Mode
Comfort Alert II Module or Similar System NEUTRAL Malfunction Module 24VAC 120VAC HOT 1F85-471 CLASS II Single Stage or Multi-Stage System (No Heat Pump) with Two Transformers TRANSFORMER
Jumper
L O/B Y Y2 W/E W2 G RH RC C
System O Single Blower/ Energized Constantly Stage 1 Fault No Output Circulator Indicator in No * Common connection (SS1) Heat Fan Energized 24 Volt 24 Volt Optional* THERMOSTATS & CONTROLLERS or Cool Mode Cool Mode Output Mode on Call for (Hot) (Hot) 24 Volt required for fault or System 1st Stage 1st Stage Cool (and Heat Cool (Com- malfunction indication. Malfunction Multi- B Cool Heat Mode Heat if mon) Switch Energized Constantly Stage 2 Mode 2nd Stage configured (MS2) in Heat, Off, 2nd for Electric Emergency Stage Heat) Mode
Comfort Alert II Module or Similar System NEUTRAL Malfunction Module 24VAC 120VAC HOT
1F83-0422/1F85-0422 CLASS II Single Stage or Multi-Stage System (No Heat Pump) with Single Transformer TRANSFORMER
Jumper
L O/B Y Y2 W/E W2 G RH RC C
System
Single O Blower/ No Circulator Stage 1 Fault Energized Constantly No Output Output Fan Energized (SS1) Indicator in Cool Mode Optional* * Common connection 21 Heat on Call for 24 Volt 24 Volt or Cool Mode 24 Volt required for fault or Mode Cool (and (Hot) (Hot) System 1st Stage (Com- malfunction indication. B 1st Stage Heat if Heat Cool Multi- Malfunction Cool Heat Mode mon) Energized Constantly configured Stage 2 Switch Mode 2nd Stage (MS2) in Heat, Off, 2nd for Electric Emergency Stage Heat) Mode
System Malfunction Module NEUTRAL 24VAC 120VAC HOT 1F85-0477 CLASS II Single Stage or Multi-Stage System (No Heat Pump) with Single Transformer TRANSFORMER
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1339 THERMOSTATS & CONTROLLERS RESIDENTIAL AND LIGHT COMMERCIAL THERMOSTATS 1F80 SERIES
WIRING (continued)
Optional Jumper for Single Stage Heat Pump
THERMOSTAT O/B Y G W C R NEWSYSTEM! Changeover Fan Relay* Optional Compressor Relay Contactor Heat Relay Hot 24 VAC 120 VAC
* Changeover Relay is energized in COOL when O/B switch is in the “O” position Neutral Changeover Relay is energized in HEAT when O/B switch is in the “B” position TRANSFORMER (Class II Current Limited) 1F80-0224/1F86-0244, 1F80-0261/1F87-0261 Typical Wiring Diagram for Single Transformer Single Stage Systems
THERMOSTAT O/B Y G W2 C L R SYSTEM NOTE SYSTEM Changeover MONITOR If safety circuits are in Fan SWITCH only one of the systems, Relay* Aux/Emergency Optional Compressor Relay remove the transformer Contactor Heat Relay of the system with NO (Stage 2) Hot safety circuits. 24 VAC 120 VAC
* Changeover Relay is energized in COOL when O/B switch is in the “O” position Neutral Changeover Relay is energized in HEAT when O/B switch is in the “B” position TRANSFORMER (Class II Current Limited)
1F82-0261/1F89-0211 Typical Wiring Diagram for Single Transformer Systems
THERMOSTATS & CONTROLLERS O/B Y G W2 E C L R SYSTEM See Note ** SYSTEM NOTE Changeover MONITOR Fan Emergency If safety circuits are in Relay* Aux SWITCH 21 only one of the systems, Compressor Relay Relay remove the transformer Contactor Relay (Stage 2) of the system with NO Hot safety circuits. 24 VAC 120 VAC
* Changeover Relay is energized in COOL when O/B switch is in the “O” position Neutral Changeover Relay is energized in HEAT when O/B switch is in the “B” position TRANSFORMER ** Jumper required to use a single Aux Heat for both Second Stage Heat and Emergency (Class II)
1F82-261, 1F89-211 Single Transformer Systems
1340 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS RESIDENTIAL AND LIGHT COMMERCIAL THERMOSTATS 1F80 SERIES
WIRING (continued)
NOTE RED jumper wire (provided with thermostat) must be connected between thermostat RH and RC terminals JUMPER for proper thermostat operation with this system. WIRE THERMOSTAT C‡ B O Y G W RC RH SYSTEM
Cooling Fan Heating NEWSystem Relay System !Hot 24 VAC 120 VAC
Neutral TRANSFORMER 1F80-224, 1F80-361, 1F86-344 Heat/Cool, 4-wire, Single Transformer Systems
ORDERING INFORMATION MODEL DESCRIPTION 1F80-0224 Single stage dual power with 24 hour programmable option with 2 inch blue display 1F80-0261 Single stage dual power with 5-1-1 day programmable option with 2 inch blue display 1F80-0471 Single stage dual power with 5-1-1 day programmable option with 4 inch blue display 1F80-361 Single stage dual power non-programmable with classic display
1F80ST-0471 Single stage dual power with 5-1-1 day programmable option with 4 inch blue display (spanish) THERMOSTATS & CONTROLLERS 1F82-0261 Heat pump programmable dual power with 2 inch blue display 1F82-261 Heat pump programmable dual power with classic display 1F83-0422 Multi stage or single stage with heat pump (2 stage heat)option non-programmable with 4 inch blue display 1F83-0471 Multi stage or single stage with heat pump (3 stage heat)option non-programmable with 4 inch blue display 1F85-0422 Multi-stage or single-stage heat pump (2 stage heat) compatible programmable or non-programmable with 4 inch blue display 1F85-0477 Multi-stage or single-stage heat pump (3 stage heat) compatible programmable or non-programmable with 4 inch blue display 1F85-277 Multi-stage or single-stage heat pump compatible programmable or non-programmable with classic display 1F85ST-0422 Multi-stage or single-stage heat pump (2 stage heat) compatible programmable or non-programmable with 4 inch blue display (spanish) 1F86-0244 Single stage or heat pump non-programmable with 2 inch blue display 1F86-0471 Single stage or heat pump non-programmable with 4 inch blue display 1F86-344 Single stage non-programmable with classic display 1F86EZ-0251 Single stage or heat pump non-programmable with 2 inch blue display with home sleep and away options 1F86ST-0471 Single stage or heat pump non-programmable with 4 inch blue display (spanish) 1F87-361 Single stage or heat pump with 7 day programmable option with classic display 1F89-0211 Heat pump non-programmable with 2 inch blue display 1F89-211 Heat pump non-programmable with classic display 21 1F89EZ-0251 Heat pump non-programmable with EZ read screen with home, sleep, and away options
Note: All models available in a 6-Pack .
RELATED PRODUCTS PAGE MODEL DESCRIPTION ATK63 Thermostat guard (6.9"H x 4.7"W x 1.75"D - inside dim.) 1392 F29-0198 Thermostat guard (8.125"H x 4.375"W x 3.375"D - inside dim.) 1392
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1341 THERMOSTATS & CONTROLLERS DIGITAL DISPLAY PROGRAMMABLE THERMOSTATS T4000, T8000, AND T12000 SERIES THERMOSTATS
DESCRIPTION Peco offers a wide range of programmable thermostats to meet your needs . The T4500 Series thermostats offer single or multistage heating and cooling . The T4900 Series offer up to 3 stages of heating and 2 cooling . Both series come with 24vac power or battery power options . The T8000 Series offer multistage heating and cooling with a large digital display . The T12000 Series can be used in single stage or NEW! multistage heating and cooling applications and it comes with a touchscreen display .
T4000 Series
FEATURES • 7 day, 5/2 day, or non-programmable modes • Keypad lockout feature • Occupancy sensor input • Holiday scheduling T8000 Series • Remote sensor input • Outdoor air sensor input for T8000 and T12000 • SD Card programming option on T8000 and T12000 • Blue backlit display • 24 VAC or battery powered • Terminal block wiring connections
T12000 Series
SPECIFICATIONS Supply Voltage 24 VAC (20-30 VAC) 50/60Hz (±10%) Fan Cycling (Auto) or Continuous (On); Output Voltage 20-30 VAC 1 speed Output Current 0 .02 - 1 .0 A per terminal; W1 (B/O), Fan Switching Off-Heat-Cool-Auto-Emergency W2 (AUX), G, A, E, Y1, Y2 . NOTE: (Emergency not available on T4000 Total current draw must not exceed models) 2 .5A . Temperature Range 50° to 90° F (10° to 32° C) Lockout Keypad with 3 digit code capability Operating Temperature 0° to 120°F (-17° to 48°C Remote Sensor Ye s Operating Humidity 5% to 95% RH, Non-condensing Switch Type Push button (selectable) Additional Specifications System Type Conventional or Heat Pump
THERMOSTATS & CONTROLLERS AA Batteries can be used for power Dimensions 4 3"H. x 5 .7"W x 1 .3"D (recommended for back-up) (10 .92 x 14 .48 x 3 .3 cm) Compatibility SD card: T8000 and T12000 Series Weight 1 1. lb ( .49 kg) Approvals ASHRAE 90 .1 AND CA Title 24 21 Differential 1°F (0 .5°C) Building Code Compliant Display Type Digital with blue backlight Warranty 2 years
1342 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS DIGITAL DISPLAY PROGRAMMABLE THERMOSTATS T4000, T8000, AND T12000 SERIES THERMOSTATS
TERMINAL DESIGNATIONS AND SYSTEM TYPES, TERMINAL DESIGNATIONS & SYSTEM TYPES, T4000 SERIES T8000 & T12000 SERIES Conventional Terminal Letters Heat Pump Terminal Letters Conventional Terminal Letters Heat Pump Terminal Letters C Unswitched side, 24 VAC C Unswitched side, 24 VAC C Unswitched side, 24 VAC C Unswitched side, 24 VAC W1 Stage 1 Heat B/O Reversing Valve W1 Stage 1 Heat B/O Reversing Valve W2 Stage 2 Heat AUX Auxiliary (Stage 3 Heat) W2 Stage 2 Heat AUX Auxiliary (Stage 3 Heat) G Fan G Fan G Fan G Fan A A Economizer/Damper/ A A Economizer/Damper/Humidity NEWE E ! Humidity Compressor Stage 1, E Stage 3 Heat E Emergency Heat Y1 Stage 1 Cool Y1 Heat /Cool 1 Compressor Stage 1, Heat / Y1 Stage 1 Cool Y1 Compressor Stage 2, Cool 1 Y2 Stage 2 Cool (or Dehumidify) Y2 Heat /Cool 2 (or Dehumidify) Stage 2 Cool Compressor Stage 2, Heat / Y2 Y2 Power for heating, switched Power for heating, switched (or Dehumidify) Cool 2 (or Dehumidify) RH RH side, 24 VAC side, 24 VAC Power for heating, switched Power for heating, switched RH RH Power for cooling, switched Power for cooling, switched side, 24 VAC side, 24 VAC RC RC side, 24 VAC side, 24 VAC Power for cooling, switched Power for cooling, switched RC RC SC Sensor Common SC Sensor Common side, 24 VAC side, 24 VAC S1 Indoor Remote Sensor S1 Indoor Remote Sensor SC Sensor Common SC Sensor Common S1 Indoor Remote Sensor S1 Indoor Remote Sensor S2 Occupancy Setback Input* S2 Occupancy Setback Input* S3 Outdoor Remote Sensor S3 Outdoor Remote Sensor" THERMOSTATS & CONTROLLERS ORDERING INFORMATION MODEL DESCRIPTION T12511-001 Programmable 3 heat, 2 cool 24 VAC or battery powered large screen T12532-001 Non-programmable 1 heat, 1 cool 24 VAC or battery powered T12532-IAQ Programmable 3 heat, 2 cool 24 VAC or battery powered with scheduling T4011-001 Non-programmable 1 heat, 1 cool 24 VAC or battery powered T4522-001 Programmable 1 heat, 1 cool 24 VAC or battery powered T4932SCH-001 Programmable 3 heat, 2 cool 24 VAC or battery powered large screen with humidity control T4932SCH-002 Programmable 2 heat, 2 cool 24 VAC or battery powered T8532-001 Programmable 3 heat, 2 cool 24 VAC or battery powered with humidity control and scheduling T8532-IAQ Programmable 1 heat, 1 cool 24 VAC or battery powered
ACCESSORIES MODEL DESCRIPTION SP155-017 Indoor remote sensor SB200-001 Occupancy sensor 21
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1343 THERMOSTATS & CONTROLLERS RESIDENTIAL LCD DISPLAY PROGRAMMABLE/ NON-PROGRAMMABLE THERMOSTATS 1F72, 1E78 AND 1F78 SERIES THERMOSTATS
DESCRIPTION The 1F72 Series thermostats are configured for heat pump systems and have a 5-2 day programming option . The 1F78 Series thermostat is available in programmable or non-programmable . The programmable option is a 5-2 day configuration with up to 4 period settings per day . The 1E78 model numbers are vertical versions with the same features as the 1F78 models . This series offers the perfect upgrade NEW! from mechanical thermostats at an affordable cost . The large dimensional design of these thermostats covers wall marks left by most mechanical thermostats without the need for a 1F72-151-ST 1F78-144 wall plate .
FEATURES • Large LCD with backlight • Includes B/O terminals • Fossil fuel or electric heat compatible • Electronic accuracy • Selectable Celsius or Fahrenheit temperature display 1F78-151
1E78-140 1E78-151
SPECIFICATIONS Supply Voltage 24VAC Reset Ye s Display Ye s RoHS Statement No Display Type LCD Sensing Element Ye s Accuracy ±1° Sensor Type Thermistor Additional Specifications Temperature Range 32° to 105°F (0° to 41°C) 1F78-151,1F72-151,1E78-151 Operating Temperature 32° to 105°F (0° to 41°C) Program option 5/2 Day Shipping Temperature -4° to 150°F (-20° to 65°C) 1F78-144,1E78-140,1F79-111 Setpoint Range 45° to 90°F (7° to 32°C) Non-programmable Schedule Type Control Type Low Voltage Thermostat 1F78-15,1F72-151, 1E78-151 Deadband 1° 4 (Morning, Day, Evening, Night), Differential 1° Rated Differentials - Single Stage Models: Materials Of Construction Fast Slow ABS Plastic Heat (Single Stage) 0 .8°F 1 .5°F Mounting Any except upside down
THERMOSTATS & CONTROLLERS Cool (Single Stage) Fixed 1 .2°F Heat Pump 1 .2°F 1 .5°F Weight 0 58. lb (0 .26 kg) Aux./Emer. Heat 0 .8°F 1 .2°F Warranty 5 years
21 Dimensions System Type 1F78-151,1F78-144,1F72-151,1F79-111 1F78-151,1F78-144,1E78-140,1E78-151 6 .25"L x 4 .25"H x 1 75"D. Single Stage (15 .8 x 10 .8 x 4 45. cm) 1F79-111,1F72-151 Heat Pump 1E78-151,1E78-140 4 .29"L x 6 .2"Hx 6 .2"D (10 .9 x 15 .75 x 15 75. cm) Enclosure Nema 1 Wiring Terminations Input Current 1F78-151,1F78-144,1E78-151 1F78-151,1F78-144,1F72-151,1F79-111, 1E78-151 RC, RH, W, Y, G, O, B 0 .05 to 1 0. Amp (load per terminal) 1F72-151,1F79-111 R, C, Y, W2, G, O/B, L, E, E78-140 0 .05 to 1 5. Amps (load per terminal) 1E78-140 R, C, Y, W/2, G, O/B, L Fan Switching Ye s
1344 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS RESIDENTIAL LCD DISPLAY PROGRAMMABLE/ NON-PROGRAMMABLE THERMOSTATS 1F72, 1E78 AND 1F78 SERIES THERMOSTATS
WIRING
NOTE JUMPER RED jumper wire (provided with thermostat) must be WIRE THERMOSTAT connected between thermostat RH and RC terminals JUMPER for proper thermostat operation with this system. WIRE B O Y G W RC RH SYSTEM THERMOSTAT B O Y G W RC RH SYSTEM NOTE Cooling Fan Heating RED jumper wire (provided System Relay System Hot Cooling Fan Heating with thermostat) must be connected between thermo- 24 VAC 120 VAC System Relay System Hot stat's RH and RC terminals for proper thermostat oper- Neutral 24 VAC 120 VAC NEW! ation with this system. TRANSFORMER Neutral TRANSFORMER
Typical wiring diagram for heat/cool, Heat/cool, 4-wire, single transformer systems 4-wire, single transformer systems
1E78-151 1F78-144, 1F78-151
THERMOSTAT O/B Y G W2 E C L R SYSTEM See Note ** SYSTEM Changeover MONITOR Fan Emergency Relay* Aux SWITCH Compressor Relay Relay Contactor Relay (Stage 2) Hot 24 VAC 120 VAC Neutral * Changeover Relay is energized in COOL when O/B switch is in the “O” position TRANSFORMER THERMOSTATS & CONTROLLERS Changeover Relay is energized in HEAT when O/B switch is in the “B” position (Class II) ** Jumper required to use a single Aux Heat for both Second Stage Heat and Emergency
NOTE If safety circuits are in only one of the systems, remove the transformer of the system with NO safety circuits.
Typical wiring diagram for single transformer systems
1F72-151, 1F79-111
ORDERING INFORMATION MODEL DESCRIPTION 1F78-151 Thermostat; SS/programmable/classic display 1F78-144 Thermostat; SS/non-programmable/classic display 1F72-151 Thermostat; HP/programmable/classic display 1E78-151 Thermostat; SS/programmable/vertical/classic display 21 1E78-140 Thermostat; SS/non-programmable/vertical/classic display 1F79-111 Thermostat; HP/non-programmable/classic display Note: All models available in a 6-pack .
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1345 THERMOSTATS & CONTROLLERS DIGITAL FAN COIL THERMOSTAT TB6575, TB8575 SUITEPRO™ SERIES
DESCRIPTION The SuitePRO™ is a family of Digital Fan Coil thermostats for residential and commercial applications such as hotels, condominiums, school classrooms, etc . All three models are suitable for multiple applications . Changes in output wiring and external links between wiring terminals allow you to configure the thermostat for the appropriate application . Valves and auxiliary electric heaters can be controlled using a relay or contactor controlled by the system switch . NEW!
FEATURES CUS • Simple, intuitive user interface. TB6575A100 • Pre-installed lead wires for fast installation (TB6575A and TB6575B models only) • Backlit display permits easy viewing in any light. • Proportional plus Integral (P+I) control algorithm for APPLICATION precision temperature regulation. TB6575A1000 • Adjustable deadband for auto changeover using the • 2-pipe or 4-pipe with seasonal/manual/automatic heat/ Heat and Cool setpoint settings. cool changeover • Adjustable maximum heating and minimum cooling setpoint limits using range stops. TB6575B1000 • EEPROM permanently retains user settings, including • 2-pipe with seasonal or manual heat/cool changeover setpoints, during power loss (no batteries required). • Selectable °C or °F display via Installer Setup. TB8575A1000 • Optional remote indoor temperature sensor. • 2-pipe or 4-pipe with manual and seasonal heat/cool • Freeze protect algorithm turns on heat when needed. changeover
SPECIFICATIONS Supply Voltage Remote Pipe Sensor (optional) (Type 42) TB6575A1000 and TB6575B1000 Type 20K NTC 120 VAC ±10% at 50/60Hz Working Range 32° to 199°F (0° to 93°C) 240 VAC ±10% at 50/60Hz Display Range 32° to 199°F (0° to 93°C) TB8575A1000 20 to 30 VAC at 50/60Hz (using Accuracy ±5 .0°F over the temperature sensing 24 VAC Class 2 NEMA rated range transformer) Remote Setback Input Component Ratings TB6575 9 VDC, < 4 mA Fan Relay 24 VAC 1 .0A TB8575 16 VDC, < 5 mA THERMOSTATS & CONTROLLERS 120 VAC 6 .0A TB6575/TB8575 Dry contact, maximum resistance of 240 VAC 3 .0A 100Ω Heat/Cool Relay 24 VAC 1 .0A Operating Temperature 0° to 120°F (18° to 49°C) 120 VAC 1 .0A Operating Humidity 5% to 90% RH, non-condensing 21 240 VAC 1 .0A Weight 1 0. lb (0 .45kg) Onboard Temperature Sensor Approvals CSA Certified C/US for Canada and Type 10K NTC the U .S .A . Working Range 0° to 120°F (18° to 49°C) Warranty 2 years Display Range 32° to 99°F (0° to 37°C) Accuracy ±2 .0°F at 70°F Remote Temperature Sensor (optional) (Type 42) Type 20K NTC Working Range 0° to 120°F (18° to 49°C) Display Range 32° to 99°F (0° to 37°C) Accuracy ±2 .0°F at 70°F
1346 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS DIGITAL FAN COIL THERMOSTAT TB6575, TB8575 SUITEPRO™ SERIES
WIRING - 24 VAC (TB8575)
R R W/Y VALVE W/Y HEAT VALVE Y/RA Y/RA COOL VALVE W/YGI VALVE W/GIY HEAT VALVE Y/GmA FAN Y/GmA COOL VALVFANE GI L1 GI L1 Gh (HOT) Gh (HOT) Gm FAN 24 VAC Gm FAN 24 VAC C L2 C L2 L1 1 L1 1 GhRs (HOT) GhRs (HOT) 24REMOTE VAC SENSOR 24REMOTE VAC SENSOR C L2 C L2 Sc 1 Sc 1 Rs REMOTE SETBACK Rs REMOTE SETBACK SB REMOTE SENSOR SB REMOTE SENSOR NEWPsSc ! PsSc REMOTE SETBACK REMOTE SETBACK SB SB Ps1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND Ps1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. OVERLOAD PROTECTION AS REQUIRED.
1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND TwOVERLOADo pipes PROTECTION (Heat or Cool) AS REQUIRED Manual. Changeover Four pipesOVERLOAD (Heat PROTECTION and Cool) AS Man REQUIREDual/Au.to wiring diagram (24 VAC shown). Changeover wiring diagram (24 VAC shown). Two pipes (Heat or Cool) Manual Changeover Four pipes (Heat and Cool) Manual/Auto wiring diagram (24 VAC shown). Changeover wiring diagram (24 VAC shown).
1 REMOVE PRE-WIRED WIRE FROM TERMINAL 5 (MID FAN SPEED). L 2 JUMPER TERMINALS 5 AND 6 (MID AND HIGH FAN SPEEDS). FAN W/Y HEAT VALVE 1 MEDIUMREMOVE SETTING PRE-WIRED WILL WIRE OPER FROMATE ONTERMINAL HIGH SPEED 5 (MID. FAN SPEED). L 3 CONNECT TERMINAL 7 TO THE MID FAN SPEED WIRE FROM Y/A COOL VALVE 2 JUMPER TERMINALS 5 AND 6 (MID AND HIGH FAN SPEEDS). FAN MEDIUMPREVIOUS SETTING SYSTEM. WILL OPERATE ON HIGH SPEED. W/GIY HEAT VALVE 34 CONNECTREWIRE THE TERMINAL PREVIOUS 7 TO MID THE FA MIDN SPEED FAN SPEED WIRE TO WIRE THE FROM NEUTRAL Y/GmA COOL VALVEFAN 1 6 PREVIOUSCIRCUIT IN SYSTEM.THE SYSTEM. GI L1 5 Gh 5 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD 2 3 (HOT) 4 REWIRE THE PREVIOUS MID FAN SPEED WIRE TO THE NEUTRAL Gm 6 FAN 24 VAC PROTECTION AS REQUIRED. 1 C L2 CIRCUIT IN THE SYSTEM. L1 5 Gh 4 65 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD 2 Rs 3 (HOT) CHANGE INSTALLER SETUP IS CODE 9 TO 2 FOR REMOTE SENSO24R VAC 2PROTECTION SPEED FAN CONTROL.AS REQUIRED. ScC L2
REMOTE SETBACK 4 6 CHANGE INSTALLER SETUP IS CODE 9 TO 2 FOR THERMOSTATS & CONTROLLERS SBRs REMOTE SENSOR Wiring2 SPEED diagram FAN CONTROL.when missing a wire for PsSc electromechanical retro t (24 VAC shown). REMOTE SETBACK SB Wiring diagram when missing a wire for Ps electromechanical retro t (24 VAC shown). WIRING - 120/240/277 VAC (TB6575A/B)
L L (HOT) L L (HOT) W/Y HEAT VALVE W/Y VALVE L L (HOT) Y/A COOL VALVE Y/AL L (HOT) W/Y HEAT VALVE GI W/GIY VALVE Y/A COOL VALVE Gm FAN Y/GmA FAN GI Gh GhGI Gm FAN FAN N N GmN N GhRs Gh REMOTE SENSOR Rs REMOTE SENSOR N N N Sc ScN Rs REMOTE SETBACK REMOTE SETBACK SB REMOTE SENSOR SBRs REMOTE SENSOR Sc Ps PsSc REMOTE SETBACK REMOTE SETBACK SB SB Four pipesPs (Heat and Cool) Manual/Auto Two pipesPs (Heat or Cool) Manual Changeover changeover wiring diagram (120/240/277 VAC shown). wiring diagram (120/240/277 VAC shown). Four pipes (Heat and Cool) Manual/Auto Two pipes (Heat or Cool) Manual Changeover changeover wiring diagram (120/240/277 VAC shown). wiring diagram (120/240/277 VAC shown). 21
ORDERING INFORMATION
MODEL DESCRIPTION TB6575A1000 Universal 120/240 VAC line voltage (2 or 4 pipe) TB6575B1000 120/240 VAC line voltage (2 pipe only) TB8575A1000 Universal 24 VAC low voltage (2 or 4 pipe)
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1347 THERMOSTATS & CONTROLLERS FLOATING AND PROPORTIONAL ZONE THERMOSTAT TB6980 AND TB7980 SERIES
DESCRIPTION Model T6980 is a floating-control zone thermostat . Model T7980 is a proportional-control zone thermostat . Both have PI control algorithms and models with dual outputs are available . The digital display can be °F or °C, and will also display bar graphs and pushbuttons for setpoint and override functions . The microprocessor-based thermostat is dipswitch configurable for application, including night setback value and minimum / maximum setpoint limits . NEW! TB6980B1006
FEATURES • Floating control output (T6980) DIMENSIONS • Proportional control outputs (T7980) in Configuration and status display Side 2.7 • Digital display (°F or °C and output bar graph) (cm) view (6.9) • PI control algorithms • Single or dual-output models • Vertical mounting Cooling mode Heating mode • Night setback override (2-hour) Temperature display Output display • Remote sensor capable mode Temperature 4.6 • Room or discharge air control adjustment (11.8) button • Minimum and maximum setpoint limits Override • Minimum damper open % button Override • 12-second backlighting • Two-year warranty
in 1 (cm) (2.54)
SPECIFICATIONS Supply Voltage 24 VAC Damper Minimum 0-50% Supply Current 25 mA Actuator Timing 80-160 seconds (Tx6980 only) Control Proportional + integral (PI) Output 2 Heating, floating control, on/off, or Display 1” x 1’’ LCD with 0 5’’. high proportional temperature digits Output 3 Minimum on time (1 second, 10 Readout Backlighting 32° to 140°F (0° to 60°C) with 1°F minutes, 15 minutes) or signal (0 .5°C) resolution 12-second dwell, percent of output 1 button-activated Setback Value 2° to 18°F (1° to 9°C), in 2°F (1°C) Outputs Triac, 24 VAC, 0-10 VDC, or 2-10 increments VDC Setpoint Limits Minimum 50° to 94°F (10° to 34°C) TB6980A #1 Floating control, heating (reverse Maximum 51° to 95°F (11° to 35°C) acting) or cooling (direct acting) Internal Switch Settings (Switches 1, 2, and 6 only) TB6980B #1 Floating control, heating (reverse SW1 °F or °C acting) or cooling (direct acting) SW2 Normal or configuration mode #2 0 or 2-10 VDC or on/off, heating SW6 Output 2 (proportional or triac THERMOSTATS & CONTROLLERS (reverse acting) control) #3 On/off, following output 1 Memory Protection Configuration and setpoint TB7980A #1 0 or 2-10 VDC heating (reverse Setpoint Buttons Range 50° to 90°F (10 to 35°C) acting) or cooling (direct acting) Override Button 2-hour night setback override 21 TB7980B #1 0 or 2-10 VDC heating (reverse (Pushing twice cancels override) acting) or cooling (direct acting) Operating Temperature 32° to 140°F (0° to 60°C) #2 0 or 2-10 VDC or on/off, heating Operating Humidity 0-95% RH, non-condensing (reverse acting) Sensor Changeover Deadband = 9°F (5°C), or contact #3 On/off, following output 1 Wiring 22 to 18 AWG Inputs Night setback, open = occupied Mounting Direct or to 2” x 4” box Cover secured Changeover, digital input or sensor with set screw Remote sensor, 500141xx-xxx Dimensions 4 6”H. x 2 7”W. x 1 .0”D Configuration Parameters (11 .8 x 6 .9 x 2 .7 cm) Weight 0 3. lb (0 .14 kg) Application Room, supply air, changeover Warranty 2 years Output 1 Cooling or heating
1348 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS FLOATING AND PROPORTIONAL ZONE THERMOSTAT TB6980 AND TB7980 SERIES
WIRING
REMOTE MAIN RELAY OR RELAY OR RELAY OR TRANSFORMER REMOTE TRANSFORMER ACTUATOR ACTUATORACTUATOR ACTUATOR SENSOR TRANSFORMER ACTUATOR ACTUATOR ACTUATOR * SENSOR
TRI-STATE TRI-STATE PROP/ 2-POS PROP. PROP/ 2 POS (0, 2) - 10V 2 POS 2-POS 24V TB6980B L C R L C R + - TB7980B 24V + - + - 24V 1 24Vac 1 24Vac 2 COM 2 COM 3 OPEN 3 AN 1 4 CLOSED 4 COM 5 T2/ AN 2 5 T2/ AN 2 6 T2/COM 6 T2/COM 7 T3 7 T3 8 T3 8 T3 9 COM 9 COM 10 Sensor 10 Sensor NEWPIPE OR! DUCT STAT PIPE OR DUCT STAT 11 c/over (OPEN = H/C DEFAULT OUTPUT 1) 11 c/over (OPEN = H/C DEFAULT OUTPUT 1) 12 NSB 12 NSB TM TIME CLOCK (NSB=CLOSED) TM TIME CLOCK (NSB=CLOSED)
Internally connected. T2/COM is internally connected if SW6=analog. Internally connected. T2/COM is internally connected if SW6=analog. Alternative 2 POS/Proportional hookup. *Can be a different power source or the same as main transformer. Only terminals 1, 2, 3, 4, 9, 10, 11, 12 are used on TB6980A thermostats. Only terminals 1, 2, 3, 4, 9, 10, 11, 12 are used on TB7980A thermostats. CONFIGURATION
TB7980B 88888888 88888888 88888888 88888888 88888888 88888888 88888888 SP HI SP LO Application Output 1 type Output 2 typea Output 3 type Output 3 NSB value Output 1 Maximum Minimum (Htg only) (follows Output 1) activation min. opening setpoint setpoint
0 Internal sensor 0 Cool / 0-10V 0 Not used 0 Not used 0 100% 1 1°C (2°F) 0 0% 1 Room 1 Heat / 0-10 V 1 SSR 24 VAC 1 SSR 24 VAC 1 10% 2 2°C (4°F) 1 10% Can be set Can be set 2 Return 2 Cool / 2-10 V 2 N.C. Valve 2 N.C. Valve 2 20% 3 3°C (6°F) 2 20% between between 3 Supply 3 Heat / 2-10 V 3 N.O. Valve 3 N.O. Valve 3 30% 4 4°C (8°F) 3 30% 35°C (95°F) 10°C (50°F) 4 Auto changeover 4 Mech. relay 4 Mech. relay 4 40% 5 5°C (10°F) 4 40% and ’’minimum and ’’maximum Shading = 5 Limited cooling 5 SSR 3-32 V 5 Contact 5 50% 6 6°C (12°F) 5 50% setpoint + 1’’ setpoint - 1’’ Factory Setting 6 SCR 0-10 V 6 60% 7 7°C (14°F) 7 Act. 0-10 V 7 70% 8 8°C (16°F) Default value Default value 8 Act. / 2-10 V 8 80% 9 9°C (18°F) is 35°C (95°F) is 10°C (50°F) 9 90% THERMOSTATS & CONTROLLERS a. If Output 2 type is set to 0-4, set the SW6 switch to Triac. If the output type is set to 5-8, set the switch to Analog.
TB6980B 88888888 88888888 88888888 88888888 88888888 88888888 8888888888888888 SP HI SP LO
Application Output 1 type Output 2 typea Output 3 type Output 3 NSB value Output 1 Output 1 Maximum Minimum (Htg only) (follows Output 1) activation min. opening opening time setpoint setpoint
0 Internal sensor 0 Cool 0 Not used 0 Not used 0 100% 1 1°C (2°F) 0 0% 0 80 1 Room 1 Heat 1 SSR 24 VAC 1 SSR 24 VAC 1 10% 2 2°C (4°F) 1 10% 1 90 Can be set Can be set 2 Return 2 N.C. Valve 2 N.C. Valve 2 20% 3 3°C (6°F) 2 20% 2 100 between between 3 Supply 3 N.O. Valve 3 N.O. Valve 3 30% 4 4°C (8°F) 3 30% 3 110 35°C (95°F) 10°C (50°F) 4 Auto changeover 4 Mech. relay 4 Mech. relay 4 40% 5 5°C (10°F) 4 40% 4 120 and ’’minimum and ’’maximum 5 Limited cooling 5 SSR 3-32 V 5 Contact 5 50% 6 6°C (12°F) 5 50% 5 130 setpoint + 1’’ setpoint - 1’’ 6 SCR 0-10 V 6 60% 7 7°C (14°F) 6 140 7 Act. 0-10 V 7 70% 8 8°C (16°F) 7 150 Default value Default value 8 Act. / 2-10 V 8 80% 9 9°C (18°F) 8 160 is 35°C (95°F) is 10°C (50°F) 9 90% a. If Output 2 type is set to 0-4, set the SW6 switch to Triac. If the output type is set to 5-8, set the switch to Analog. ORDERING INFORMATION Model Description Output 1 Output 2 Output 3 TB6980A1007 Floating (tri-state) Floating, heating and None None cooling TB6980B1006 Floating (tri-state) Floating, heating and Proportional Two-position, cooling or two-position, heating or cooling, heating as determined by 21 output 1 TB7980A1006 Proportional Proportional, heating None None (0 or 2-10 VDC) and cooling TB7980B1005 Proportional Proportional, heating Proportional Two-position, heating (0 or 2-10 VDC) and cooling or two-position, and cooling, as heating determined by output 1
RELATED PRODUCTS 50014156-002 Remote room temperature sensor 50014157-001 Remote duct temperature sensor
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1349 THERMOSTATS & CONTROLLERS HONEYWELL SINGLE- OR MULTI-LOOP STANDALONE CONTROLLER T775 SERIES
DESCRIPTION Model T775 is a standalone multi-point and multi-loop controller designed for a wide range of applications . The I/O point mix is unit-specific with temperature, humidity, and pressure input models available . Relay or analog output models may be selected as well . Single-loop, two-loop, and reset controllers may be selected, all including a seven-day time clock for output disable or night setback . The relay output controllers have adjustable differential control algorithms . NEW! Analog output controllers have adjustable throttling range, proportional plus integral (PI), or proportional, integral, and derivative (PID) control . The backlit display is easy to read, and the menu-driven setup is simple . The T775 is available in NEMA 1 or NEMA 4X enclosures for the most demanding environments . T775M2048 T775M2078 open door FEATURES closed door with wiring • Standalone controller • Multiple power input (24, 120, or 240 VAC) • Single- or dual-loop models • Throttling range, PI and PID tunable modulating models • Integral seven-day time clock for night setback or • Adjustable differential two-position models shutdown • Humidity, pressure, and universal input models • Remote night setback or shutdown input • Two-position 10A relay model • °F or °C temperature display • Analog output 0 or 2 to 10 VDC, 4-20 mA, and 135Ω • Daylight savings time compensation models SPECIFICATIONS Supply Voltage 24, 120, or 240 VAC, 50/60 Hz Modulating 0 or 2-10 VDC, 2 kΩ minimum Supply VA 8 VA maximum at 60 Hz, impedance 10 VA maximum at 50 Hz 4-20 mA, 600Ω maximum impedance Display Backlit digital 2 .5" x 1 .5", Series 90, 135Ω configurable °F or °C Temperature Sensor Included in all T775-A,B,L,M,P,R Operation 6-key, menu-driven, with simple versions programming lock Probe 50021579-001, 8" leads Memory Program is non-volatile; time is retained Range -60°F to 270°F (-51° to 132°C) for 24 hours Accuracy ±1°F at 77°F Clock 12 hour (AM/PM) for night setback/ Control Type Model-specific (see I/O configuration shutdown, daylight savings time table) enable/disable Relay on/off Differential control, adjustable ±1° to Scheduling 7-day, two events per day ±150°F Setpoint Model specific (see I/O configuration Modulating PI or PID, with adjustable tuning table) Throttling range ±1° to ±150°F Temperature -40° to 248°F (-40° to 120°C) Derivative and integral times 0 to 3600 Humidity (T775U) 0-100% seconds Pressure (T775U) -500 to 500 psi -30 to 30 inches W .C . Multiple loops depending on model THERMOSTATS & CONTROLLERS -3000 to 3000 Pa or kPa Wiring Terminal blocks separated by function Signal Input Model-specific (see I/O configuration Enclosure Plenum rated plastic, UL94V NEMA 1, table) NEMA 4X versions Hinged cover with Temperature RTD 1 .1 k at 77°F, PTC, 2 .1 /°F, Platinum LCD window Five (1/2") knockouts on 21 1 kΩ at 32°F, 385 curve four sides Digital input Dry contact, all models (Used for Color Two-tone gray system shutdown or night setback) Mounting Surface screw tabs or DIN rail Analog (T775U) 0-10 VDC, 4-20 mA Operating Temperature -40° to 140°F (-40° to 60°C) Input Calibration Temperature offset ±10°F Operating Humidity 5% to 95% RH (non-condensing) Universal offset ±10% of scale Dimensions 8 .2"H x 4 .9"W x 3"D Signal Output Model-specific (see I/O configuration (20 .7 x 12 .5 x 7 .4 cm) Door opens out table) 4" (10 .2 cm) Relays/tri-state 10A at 24 VAC (resistive), 1/2 hp at 120 Weight 2 .2 lb (1 kg) VAC Approvals UL Listed File #E4436, File #XAPX . 125 VA pilot duty E4436 cULus, CE, C-tick, FCC Warranty 1 year
1350 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS HONEYWELL SINGLE- OR MULTI-LOOP STANDALONE CONTROLLER T775 SERIES
WIRING
T775A200 2-Position 1 Temp 1 SPDT 1 Clock NSB NEMA 1 1 2-Pos Two-position control T775B20 2 2-Position or Floating* 2 Temp 2 SPDT 2 (1 if Floating) Clock NSB NEMA 1 1 Float Floating (tri-state) control T775B20 0 2-Position or Floating* 2 Temp 4 SPDT 2 Clock NSB NEMA 1 1 Prop Proportional control T775B202 2-Position or Floating* 2 Temp 4 SPDT 2 Clock NSB NEMA 4X 1 Temp Temperature input, RTD T775M200 Proportional 2 Temp 2 Analog 2 Clock NSB NEMA 1 1 Univ Universal input T775M20 Proportional 2 Temp 2 Analog, 2 SPDT 2 Clock NSB NEMA 1 1 Reset OSA Reset control T775M2022 Proportional 2 Temp 2 Analog, 2 SPDT 2 Clock NSB NEMA 4X 1 BLR Boiler special T775R20 5 2-Position or Floating* 2 Temp 2 SPDT 1 with Reset Clock with Reset NEMA 1 2 Seq Sequencer control T775R20 Proportional, Reset 2 Temp 2 Analog 1 with Reset Clock with Reset NEMA 1 2 ALM Alarm relay SPDT NEW!Proportional, 2-Position, Reset 2 Temp 2 Analog, 2 SPDT 1 with Reset Clock with Reset NEMA 1 2 T775R2027 Staging Boiler or pump staging T775R200 2-Position or Floating* 2 Temp 4 SPDT 1 with Reset Clock with Reset NEMA 1 2 NSB Night setback function T775P200 2-Position, Reset, BLR 3 Temp 4 SPDT, 1 ALM 1 with Reset Staging NEMA 1 3 T775L2007 2-Position, Reset, Sequential 2 Temp 4 SPDT 2, 1 with Reset Multi-stage and Seq NEMA 1 1 T775U20 2-Position & Proportional** 1 Temp,1 Univ 2 Analog, 2 SPDT 2, 1 with Reset RH,PSI,in W.C. NEMA 1 None T775S200 2-Position N/A 4 SPDT for sequence expansion on T775(L,P) NEMA 1 N/A T775R20 Proportional, 2-Position, Reset 2 Temp 2 Analog, 4SPDT 1 with Reset Clock with Reset NEMA 1 2 *Each Floating (tri-state) output has two SPDT relays. **Sensor B can only be used for reset.
Knockout A Knockout A Knockout A
T T C – T Sensor A Sensor A Sensor A B T T B S + T Mod 1 Mod 1 – R – 1 1 R V 1 + W+ 2 W T T 2 T NOTES FOR ALL DIAGRAMS B Sensor B Sensor B B Sensor B Mod 2 T T Mod 2 T R – R – 1 T When used for temperature or 4-20 mA 4 + Sensor C 4 + W T W – sensing, sensors A and B use the two TT T775 Bus + connections and are polarity insensitive. – – – Digital + Digital + Digital + Input Input Input 2 For Mod 1 and Mod 2 current (mA) or NO Digital C voltage (VDC) output, use signal (+) and Output NC Knockout B Alarm Knockout B common (–). For Mod 1 and Mod 2 Series 90 output, use W, R, and B. Knockout B 3 Power Power Power A separate earth ground is required for any C + 3 C + 3 C + 3 24 VAC 24 VAC 24 VAC Output Output power source (24, 120, or 240 VAC). Relay 3 Relay 3 4 Power Power Power For Series 90 connections, you must insert Output NC NC Output NC NC Relay 4 120/240 VAC 5 Relay 4 120/240 VAC 120/240 VAC C C C C a 340 resistor across terminals R and W. 120 240 120 240 120 240 Ω
NO NO COM NO NO COM COM Output Output Output The resistor is included with the controller. Output NO NO Output NO NO Output NO NO Relay 2 Relay 2 Relay 2 Relay 1 C C Relay 1 C C Relay 1 C C 5 Relay 4 can be used for pump output. The THERMOSTATS & CONTROLLERS NC NC NC NC NC NC pump output is always the last relay output. Knockout C Knockout D Knockout C Knockout D Knockout C Knockout D
Knockout E Knockout E Knockout E
T775A/B/M/R Series 2000 Controller T775P Series 2000 Controller T775U Series 2000 Controller ORDERING INFORMATION MODEL DESCRIPTION T775A2009 Single loop SPDT controller with one RTD T775B2016 Single loop floating or twin SPDT controller, NEMA 4 T775B2024 Two-output floating or four SPDT controller, NEMA 4, with one RTD T775B2032 Single loop floating or two SPDT controller, with one RTD T775B2040 Two-output floating or four SPDT controller, with one RTD T775M2006 Two-analog-output proportional controller, with one RTD T775M2014 Two-output proportional controller with 4 SPDT NEMA 4 T775M2022 Two-output proportional and two-output SPDT controller, NEMA 4, with one RTD T775M2030 Two-output proportional controller with 4 SPDT T775M2048 Two-analog-output proportional controller with two SPDT outputs and one RTD T775R2001 Two-output floating or four-output SPDT reset controller, with two RTDs T775R2019 Two-output proportional reset controller with four SPDT outputs and two RTDs T775R2027 Two-output proportional reset controller with two SPDT outputs and two RTDs T775R2035 One-output floating or two-output SPDT reset controller, with two RTDs T775R2043 Two-output proportional reset controller, with two RTDs T775P2003 Four on/off boiler control outputs with reset and three RTDs 21 T775L2007 Dual loop, Four on/off sequence control outputs (1 loop with reset) and one RTD T775U2016 Dual loop, Universal input, two proportional outputs, and two SPDT outputs( 1 loop with reset) T775S2008 T775(P,L), four-relay expansion module
RELATED PRODUCTS 50021579-001 Replacement temperature sensor (typically supplied with T775) C7031D2003 5-inch immersion temperature sensor w/box C7031J2009 12-foot averaging temperature sensor with wiring box C7046D1008 8-inch duct temperature sensor w/box C7130B1009 Room temperature sensor T775-SENS-WR Temperature sensor with water-resistant 5-foot leads T775-SENS-WT Temperature sensor with water-tight 6-foot leads
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1351 THERMOSTATS & CONTROLLERS MODULAR ELECTRONIC CONTROL SYSTEM SYSTEM 450
DESCRIPTION The System 450 from Johnson Controls/PENN is a family of modular digital electronic controllers that is easily assembled and configured to provide reliable temperature, pressure, and humidity control for a wide variety of commercial HVAC and industrial process applications . The System 450 is designed to replace the System 350 and System 27, and provide many additional features and benefits with a small number of model variations . All of the modules are field configurable out-of-the- NEW! box and can monitor and control temperature, pressure and humidity simultaneously .
FEATURES • Plug-together connectors and DIN rail or direct wall- • Up to 3 inputs and up to 10 outputs allow flexibility in mount capability configuring systems from simple to complex • Multi-purpose, field-configurable, and designed for • Versatile all-in-one stand-alone control modules global use provide for scalable digital and/or analog control for • Backlit LCD and 4-button touch pad user interface temperature, pressure, and humidity
SPECIFICATIONS Supply Voltage Relay Outputs 1/2 HP at 120/240 VAC, SPDT Power Module 110/120 VAC or 220/240 VAC at 50/60 AC Motor Ratings 120 VAC 208/240 VAC Hz (100 mA maximum) 24 VAC, 10 VA AC Full-load Amperes: 9 .8A 4 .9A secondary AC Locked-Rotor Amperes: 58 .8A 29 4A. Control Modules C450YNN-1 Power Supply Module or 24 10A AC Non-inductive at 24/240 VAC (20-30) VAC Safety Extra-Low Voltage Pilot Duty: 125 VA at 24/240 VAC (SELV)(Europe) or Class 2 (North Mounting Lexan 950 enclosure suitable for DIN rail America) 50/60 Hz, 10 VA minimum mounting or direct surface mount Supply VA Operating Temperature -40° to 150°F (-40° to 66°C) for 0-10 VDC C450CPN-1C 1 .3 VA maximum using 0-10V out outputs and relay outputs 1 .5 VA maximum using 4-20 mA out -40 to 104°F (-40° to 40°C) for 4-20 mA C450CQN-1C 2 .0 VA maximum using 0-10V out outputs 2 .4 VA maximum using 4-20 mA out Operating Humidity 0 to 95% RH (non-condensing); C450CBN-1C 0 .9 VA maximum Maximum Dew Point 29°C (85°F) C450RBN-1C 0 .9 VA maximum Dimensions 5 .0”H x 2 .4”W x 2 .4”D C450CCN-1C 1 .3 VA maximum (12 .7 x 6 .1 x 6 .1 cm) C450RCN-1C 1 .3 VA maximum Weight C450SPN-1C 1 .1 VA maximum using 0-10V out C450CPN-1C 0 .43 lb (0 .19 kg) 1 .3 VA maximum using 4-20 mA out C450CQN-1C 0 .43 lb (0 .19 kg) C450SQN-1C 1 .8 VA maximum using 0-10V out C450CBN-1C 0 .46 lb (0 .21kg) 2 .2 VA maximum using 4-20 mA out C450RBN-1C 0 .46 lb (0 .21kg) C450SBN-1C 0 .8 VA maximum C450CCN-1C 0 .49 lb (0 .22kg) C450SCN-1C 1 .2 VA maximum C450RCN-1C 0 .49 lb (0 .22kg) Input Signal 0-5 VDC for humidity sensors and static C450SPN-1C 0 .33 lb (0 .15 kg) pressure transducers; 0 .5 to 4 .5 VDC for C450SQN-1C 0 .33 lb (0 .15 kg) pressure transducers;1,035Ω at 25°C C450SBN-1C 0 .38 lb (0 .17 kg) THERMOSTATS & CONTROLLERS (77°F) for A99 PTC temperature sensors C450SCN-1C 0 .41 lb (0 .18 kg) Analog Output Voltage Mode (0-10 VDC) C450YNN-1C 0 .86 lb (0 .39 kg) 10 VDC maximum output voltage, 10 Approvals mA maximum output current requires North America cULus Listed; UL 60730, File E27734, 21 an external load of 1,000Ω or more . Vol . 1; FCC Compliant to CFR47, Part 15, The AO operates in Voltage Mode when Subpart B, Class B Industry Canada (IC) connected to devices with impedance Compliant to Canadian ICES-003, Class greater than 1,000Ω . Devices that fall B limits below 1,000Ω may not operate as Europe CE Compliant; Low Voltage Directive intended with Voltage Mode applications . (2006/95/EC); EMC Directive (2004/108/ Current Mode (4-20 mA) ED); RoHS Directive (2002/95/EC); WEEE Requires an external load between Directive (2002/96/EC) Australia C-Tick 0-300Ω The AO operates in Current Compliant (N1813) Mode when connected to devices with Warranty 3 years impedance less than 300Ω . Devices that rise above 300Ω may not operate as intended with Current Mode applications .
1352 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS MODULAR ELECTRONIC CONTROL SYSTEM SYSTEM 450
WIRING - EXAMPLE FOR ROOM HEATING AND COOLING WITH CONDENSER FAN SPEED CONTROL (SEE JCI BULLETINS FOR OTHER EXAMPLES)
C450CCN-1C C450YNN-1C C450SPN-1C A99 Temperature Sensor Relay Relay Power Analog Output 1 Output 2 Module Output 3 Sn-2 Control Sensor in UI Display (°F Sensor Type) S2 C Wht S1 Red 5V Blk C 0-10 VDC or Sn-1 P499 Pressure Transducer Sn-2 4-20 mA Sn-1 Control Sensor in UI Display Sn-3 Analog Output LNO2 LNO1 LNC2 LNC1 LC 2 NEW! LC 1 Signal (P500 Sensor Type)
Active/Passive COM AO AO Sensor Jumpers 240 120 2 (See Jumper Settings) VAC VAC 1
Cooling Equipment Control Circuit L1 (24 to 240 VAC) L2 L1 L2 Condenser Fan Heating Equipment 240 VAC Control Circuit Speed Control Supply Power Analog Input L1 (24 to 240 VAC) to Power Module Circuit L2 Jumper Settings Sensor 1: Jumper positioned on one pin Sn-1 (or removed) sets Sn-1 to Active (Pressure). Sn-2 Sn-3 Sensors 2 and 3: Jumper positioned across two pins sets Sn-2 and Sn-3 to Passive (Temperature).
ORDERING INFORMATION THERMOSTATS & CONTROLLERS MODEL DESCRIPTION C450CBN-1C Control module with LCD, 1xSPDT output C450CCN-1C Control module with LCD, 2xSPDT outputs C450CPN-1C Control module with LCD, 1 analog output C450CQN-1C Control module with LCD, 2 analog outputs C450RBN-1C Reset control module with LCD, 1xSPDT output C450RCN-1C Reset control module with LCD, 2xSPDT outputs C450SBN-1C Relay expansion module with 1xSPDT output C450SCN-1C Relay expansion module with 2xSPDT outputs C450SPN-1C Analog expansion module with 1 analog output C450SQN-1C Analog expansion module with 2 analog outputs C450YNN-1C Power module, 120 or 240 VAC input Note: Sensor not included
ACCESSORIES PAGE A99-CLP-1 Mounting clip for A99 temperature sensor A99BA-200C PTC Sensor with 6.5 ft (2m) shielded cable A99BB-200C PTC Sensor with 6.5 ft (2m) PVC cable A99BB-25C PTC Sensor with 9.75 in (0.25m) PVC cable A99BB-600C PTC Sensor with 19.5 ft (6m) PVC cable A99BC-1500C PTC Sensor with high temperature 49 ft (15m) sillcon cable A99BC-25C PTC Sensor with high temperature 9.75 in (0.25m) sillcon cable 21 A99BC-300C PTC Sensor with high temperature 9.75 ft (3m) sillcon cable BOX10A-600R PVC enclosure for A99 temperature sensor for outdoors DPT2650-0R5D-AB Low differential pressure transducer 0 to 0.5 in WC DPT2650-10D-AB Differential pressure transducer 0 to 10 in WC HE-67S3-0N00P Duct mount humidity sensor with A99B type temperature sensor HE-67S3-0N0BT Wall mount humidity sensor with A99B type temperature sensor P499RCP-101K Electronic pressure transducer 0-100 psi P499RCP-105K Electronic pressure transducer 0-500 psi P499RCP-107K Electronic pressure transducer 0-750 psi SHL10A-603R Sun shield for A99 sensor for outdoor sunny locations TE-6001-1 Duct temperature element holder with box 1391 WEL11A-601R Immersion well for A99 sensor for fluid temperature liquid sensing
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1353 THERMOSTATS & CONTROLLERS ECONOMIZER ZIP ECONOMIZER SERIES
DESCRIPTION The ZIP Economizer saves energy in buildings by using cool outside air as a means of cooling the indoor space . This application can drastically reduce HVAC energy costs while also improving air quality . The ZIP has easy plug and play features and by adding the different modules available in the series you can conveniently control many aspects of the space including temperature and humidity as well as remote alarm indication .The ZIP base unit offers an extended temperature transflective LCD display, with on board help, providing information throughout the entire set up . The base unit is designed to NEW! provide most common economizer functions such as two stages of mechanical cooling, intergrated cooling, four chage over strategies for free cooling and damper position feedback . One of the unique features on the ZIP Economizer is the patented ZIP code set up function which will automatically find your location once entered to maximize energy savings for your location and also make you compliant with the local energy codes .
FEATURES • Plug and play self-configuring • Patented zip code recognition • Easy to read LCD display • Alarm notification • Expandable modules available ECON-ZIP-BASE • Onboard help and troubleshooting • TH module CE 2004/108/EC
SPECIFICATIONS Supply Voltage 24 VAC ±20%, 50/60Hz, Class 2 power Software Class source ECON-ZIP-TH A Operating Temperature Control Pollution Degree ECON-ZIP-TH Only -40° to 140°F (-40° to 60°C) ECON-ZIP-TH 3 All Other Models -40° to 158°F (-40° to 70°C) Temperature Sensor Type Operating Humidity ECON-ZIP-TH NTC 10kOhm ECON-ZIP-TH Only 0 to 100% RH Humidity Sensor Type All Other Models 5 to 95% RH non-condensing ECON-ZIP-TH 0-10 VDC (0 to 100% RH) max load Connectors 1/4” male spade connectors 10kOhm, Class 2 limited energy Power Consumption Rating* Accuracy ECON-ZIP-BASE Shown on next page with full technical ECON-ZIP-TH ±3% 35-65% rH @ 75°F (23 .9°C) specifications ±5% 0-34%, 66-100% rH @ 75°F ECON-ZIP-COM 2 .5 VA (ECON-ZIP-COM), 6 .5 VA (ECON- (23 .9°C) ZIP-BASE + ECON-ZIP-COM) Response Time: Less than 45 seconds @ ECON-ZIP-EM 1 .5 VA (ECON-ZIP-EM), 5 .5 VA (ECON- 40 FPM, 75°F (23 .9°C) ZIP-BASE + ECON-ZIP-EM) Hysterisis: Less than 2 .5% rH Communication Interface Long Term Stability: Less than 1% rH/year ECON-ZIP-COM RS485 Interface, Optical Isolation max . 1k Approvals VDC (for max .1 min), Pin 4: RS485 Com ECON-ZIP-TH Only UL60730-1, -2-9 and -2-13 . UL2043 Gnd, Pin 7: RS485 Com A, Pin 8: RS485 compliant, CE Com B 2004/108/EC “Electromagnetic
THERMOSTATS & CONTROLLERS Supported Remote Alarm compatibility (EMC)”, EN60730-1, -2-9 ECON-ZIP-COM Normal Current: 0 .5A, Inrush Current: 1A and-2-13 Indoor Fan Speed Selection All Other Models cULus acc . to UL873, CAN/CSA C22 2,. ECON-ZIP-EM 100,000 cycles @ inrush current of 3A, No . 24-93 normal current 1 .5A Suitable Actuators 21 Exhaust Fan Selection ECON-ZIP-BASE AFB24-SR, NFB24-SR, LF24-SR, TFB24- ECON-ZIP-EM 100,000 cycles @ inrush current of 3A, SR normal current 1 .5A Housing NEMA 1 Supported CO2 Sensor Housing Material UL94-5VA ECON-ZIP-EM 0-10 VDC, Sensor auto-detection RoHS Conformally coated Auxiliary Input -Purge Contact Weight ECON-ZIP-EM On/Off - 24 VAC, 50/60HZ - Current Load ECON-ZIP-BASE 1 lb (0 .45 kg) min 10mA All Others 8 oz (0 .22 kg) Auxiliary Input -Remote Potentiometer Warranty 5 years ECON-ZIP-EM 2-10 VDC Current Consumption *The power consumption is for the control only and does not include ECON-ZIP-TH Max . 5mA connected loads such as actuator, compressors, fans, and sensors . Rated Impulse Voltage For transformer sizing, the power consumption of these attached ECON-ZIP-TH 800V components must be included . 1354 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS ECONOMIZER ZIP ECONOMIZER SERIES
DIMENSIONS - ECON-ZIP-BASE I/O SPECIFICATIONS - ECON-ZIP-BASE Type Name Description Electrical Specification Input R Supply Hot 24 VAC, ± 20%, 50/60Hz Input G Fan Signal (occupied) On/Off, 24 VAC, ± 20%, 50/60Hz Input C Supply Common Common Input Y Cooling requirement On/Off, 24 VAC, ± 20%, 50/60Hz Stage 1 Input Y2 Cooling requirement On/Off, 24 VAC, ± 20%, 50/60Hz Stage 2 Input W Heating requirement On/Off, 24 VAC, ± 20%, 50/60Hz NEW! Stage 1
Input SAT ± Supply Air Temperature Type: 10K NTC (Type II thermistor) Sensor Input OAT ± Outdoor Air Temperature Type: 10K NTC (Type II thermistor) Input OAH ± Outdoor Air Humidity 0-10 VDC Auto Detection: Sensor present if voltage 0.5V-10V Input RAT ± Return Air Temperature Type: 10K NTC (Type II thermistor) ZIP Economizer™ Base Unit Input RAH ± Return Air Humidity 0-10 VDC Auto Detection: Sensor present if voltage 0.5V-10V Output CC1 Compressor 1 100,000 cycles @ inrush current of 3A, TECHNICAL DATA - ECON-ZIP-BASE RTU Stage 1 normal current 1.5A Mechanical Cooling Impedance for Auto detection @ 24 V: Power Supply 24 VAC ± 20%, 50/60 Hz; Class 2 power source Circuitry <60O Ohm @ 60Hz 4 VA Base Control (ECON-ZIP-BASE)" <80O Ohm @ 50Hz Output CC2 Compressor 2 100,000 cycles @ inrush current of 3A, 5.5 VA Base Control with Energy Module THERMOSTATS & CONTROLLERS (ECON-ZIP-BASE + ECON-ZIP-EM) RTU Stage 2 normal current 1.5A Mechanical Cooling Impedance for Auto detection @ 24 V: Power Consumption Rating* 5 VA Base Control with Communication Module Circuitry <60O Ohm @ 60Hz (ECON-ZIP-BASE + ECON-ZIP-COM)" <80O Ohm @ 50Hz 6.5 VA Base with Energy Module and Communica- Output Act 1 Actuator supply common Common tion Module Output Act 2 Actuator supply hot 24 VAC, 50/60Hz Rated Impulse Voltage 330V Output Act 3 Actuator control output 2-10 VDC Connectors 1/4" male spade connectozrs Input Act 5 Actuator feedback signal 2-10 VDC Environmental RoHS, Conformally Coated The power consumption is for the control only and does not include connected loads Software Class A such as actuator, compressors, fans, and sensors. For transformer sizing, the power Control Pollution Degree 3 consumption of these attached components must be included. Temperature Input Signal NTC 10kOhm *At low temperature, the display has decreased response time, below -22°F (-30°C) it will not function." Humidity 5 to 95% RH non-condensing Humidity Input Signal 0-10 VDC; corresponds to 0 to 100% Housing NEMA 1 Housing Material UL94-5VA Ambient Temperature Range -40°F to +158°F (-40°C to +70°C) Storage Temperature Range -40°F to +176°F (-40°C to +80°C) Display 2x16 character LCD; LED backlight; transflective 21 Display Op. Range** -22°F to +176°F (-30°C to +80°C) Agency Listing cULus acc. to UL873, CAN/CSA C22.2, No. 24-93 Energy Code Compliant ASHRAE 90.1, CA Title 24, NECB
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1355 THERMOSTATS & CONTROLLERS ECONOMIZER ZIP ECONOMIZER SERIES
WIRING - ECON-ZIP-BASE
R
C Rooftop Unit Terminal
G
Thermostat 3 Y1 Y2 NEW! 4 W1
W2 3 Occ
Purge
-SR Actuator
Supply Air Temperature
Return Air Temperature
1 2
Outdoor Air Temperature
CC1 1 RTU Stage 1 Mechanical Cooling Circuitry 5
1 When Temperature and Humidity sensors are used for enthalpy, respective temperature only sensors are not used and OAT and RAT and wiring shall terminate at ECON-ZIP-TH CC2 2 Return Air Temperature and Humidity sensors are only required when differential temperature or differential enthalpy high limit changeover strategy is used RTU Stage 2 ECON-ZIP-TH ECON-ZIP-TH Mechanical Cooling When the thermostat is not equipped with occupancy control, ”Fan On” output “G” shall Return Outdoor 3 Circuitry be wired to ECON-ZIP-BASE Enthalpy 2 Enthalpy W1 must be wired to ECON-ZIP-BASE when unit is a Heat Pump, using 2 speed fan, 4 and when it is desired to record operational hours in heating 5 Existing refrigeration safety devices may exist, consult RTU wiring diagram THERMOSTATS & CONTROLLERS
21
1356 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS ECONOMIZER ZIP ECONOMIZER SERIES
DIMENSIONS - ECON-ZIP-EM I/O SPECIFICATIONS - ECON-ZIP-EM Type Name Description Electrical Specification Input CO2 ± CO2 sensor input 0-10 VDC (0-2000 ppm) Sensor auto-detection
Output IF Indoor fan low speed 100,000 cycles @ inrush current of 3A, enable normal current 1.5A Impedance for Auto detection @24 V: <600 Ohm @ 60Hz <800 Ohm @ 50Hz Output EF Exhaust fan enable 100'000 cycles @ inrush current of NEW! 3A, normal current 1.5A Impedance for Auto detection @ 24 V: <600 Ohm @ 60Hz <800 Ohm @ 50Hz Input AUX1 ± Auxiliary input Purge On/Off, 24 VAC, 50/60 Hz contact input Current load min. 10mA ZIP Economizer™ Communication Module Input AUX2 ± Auxiliary input Remote 2-10 VDC Potentiometer Input
WIRING - ECON-ZIP-EM
1
Purge Contact Thermostat
24Vac THERMOSTATS & CONTROLLERS
2
24Vac Power
0-10Vdc Signal
EFCLSF CO2 Sensor
Indoor Fan Low Speed Relay / VFD Enable 2 CO2 Sensor ECON-ZIP-EM EFC
Power Exhaust Fan Relay 24Vac Power 21 2-10Vdc Signal 1 Power Source should be same as ECON-ZIP-BASE
2 Not Supplied by Belimo
3 Sold Separately by Belimo 3 Remote Potentiometer 4 If the RTU has a 2 speed fan (IF wired), then W1 on the ECON-ZIP-BASE needs to be wired as well, since the fan shall not run in part load when heating.
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1357 THERMOSTATS & CONTROLLERS ECONOMIZER ZIP ECONOMIZER SERIES DIMENSIONS - ECON-ZIP-COM NEWWIRING - ECON-ZIP-COM !
ZIP Economizer™ Communication Module
DIMENSIONS - ECON-ZIP-TH WIRING - ECON-ZIP-TH THERMOSTATS & CONTROLLERS
ZIP Economizer™ Temperature & Humidity Sensor 21
ORDERING INFORMATION MODEL DESCRIPTION ECON-ZIP-BASE Economizer module ECON-ZIP-COM Economizer communication module (plug-in) ECON-ZIP-EM Economizer energy module (plug-in) ECON-ZIP-10K Economizer temperature sensor (plug-in) ECON-ZIP-TH Economizer temperature and humidity sensor module (plug-in)
1358 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS SETPOINT CONTROLLER PXR4
DESCRIPTION The new Model PXR4 Set Point Controller is one of the most technically advanced instruments in the industrial and commercial markets today . It is also one of the least expensive controllers of its kind . Through the use of a specially designed Fuji microprocessor, the Model PXR4 incorporates the latest technology for controlling applications . With simple, finger-tip programming from the front panel, the operator can tailor the operation of the controller quickly and easily . By automatically setting proportional band, integral (reset) time, and derivative (rate) time by means NEWof the autotuning function, control parameter guesswork! is eliminated . In addition, this controller employs Fuji's patented fuzzy logic algorithms . The Model PXR4 can learn processes, using the PID parameters as a starting point . This intelligence allows your process to reach its set point in the shortest time possible while virtually eliminating overshoot . PXR4 PXR4 Controls
FEATURES • Any type single-loop control application • Input 4-20 mA, 1-5 VDC; Output 4-20 mA • PID control or fuzzy logic control • Selectable indication resolution • Manual or autotuning • Digital filtering to suppress electrical noise • Programmable control action, reverse or direct • Easily programmed with two-level, menu-driven format • LED indication of the process variable and setpoint • Nonvolatile memory, no battery required • Output status indication • 1/16 DIN package • Fault indication of input sensor • NEMA 4X faceplate THERMOSTATS & CONTROLLERS
SPECIFICATIONS Supply Voltage 100-240 VAC, 50/60 Hz Noise Reduction Supply VA 10 VA at 120 VAC Normal Mode (50/60 Hz), 50 dB or more Input Common Mode (50/60 Hz), 140 dB or more Current 4-20 mA DC, impedance: 250Ω with Termination 8-pin socket external resistor Enclosure ABS plastic, black, 1/16 DIN NEMA Voltage 1-5 VDC, impedance: 450 kΩ 4X front panel minimum Mounting Flush panel or surface mount Input Scaling Range -1999 to 9999 Operating Temperature 14° to 122°F (-10° to 50°C) Input Sampling Cycle 0 .5 seconds Operating Humidity 0 to 90% RH (non-condensing) Input Filter 0-900 .0 seconds in 0 5. second step Dimensions Output SR2P-056 1 89". x 1 .89" x 3 .33" Current 4-20 mA DC, 600Ω maximum (4 .8 × 4 .8 × 8 .47 cm) Control Type PID control or fuzzy logic control, Weight 0 5. lb (0 .23 kg) manual or autotuning Approvals UL Listed File #E131280, CE Proportional Band 0% to 999 .9% in 0 1%. steps certified Integral Time 0-3200 seconds in 1-second steps Warranty 1 year Derivative Time 0-999 .9 seconds in 1-second steps 21 Action Direct or reverse, programmable Indication Accuracy ±0 .5% full scale ±1 digit at 73°F Memory Nonvolatile, no battery required Diagnostics Monitored by watchdog timer
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1359 THERMOSTATS & CONTROLLERS SETPOINT CONTROLLER PXR4
APPLICATION WIRING INPUT OUTPUT 4-20 mA Scalable 4-20 mA/1-5 VDC 4-20 mA output allows Control Output input allows monitoring of control of the following: + – 24 VDC the following: • Valve actuators Power Terminals 2 and 5 • Temperature • Damper actuators Supply 45 are internally + – common • Humidity • Variable speed drives + – 3 6 • Pressure • Resistance transducers NEW! – • Air flow • I/P transducers 4-20 mA + 2 7 Transmitter + • Water flow • Step controllers – 1 8 • Any 4-20 mA/1-5 VDC 250 Resistor (included) Power Supply Install for 4-20 mA transmitter; 100-240 VAC transmitter within a remove for 1-5 VDC transmitter . 50/60 HZ range of -1999 to 9999
INSTALLATION The controller should be installed as far away as possible from any device generating high frequency noise . Input signal and power cables connected to the instrument should be wired away from power line and load line to minimize inductive noise . Preferably, the instrument power cable should be twisted to avoid noise . The following guidelines for location should also be observed: 1 . Do not install in a location with corrosive gases (sulfuric gas, ammonia, etc .) 2 . Do not install in a location subject to vibration, impact, water, or high temperatures .
DIMENSIONS
3 .66 in (9 .30) 1 .89 2 .8 (cm) (4 .80) 0 .28 Panel Cutout Dimensions (0 .71) (7 .15) 1 .77" square (4 .50)
Note: Bracket for flush panel mounting is 1 .76 included . Order 1 .89 (4 .48) (4 .80) socket separately . THERMOSTATS & CONTROLLERS
ORDERING INFORMATION 21 MODEL DESCRIPTION PXR4 Setpoint controller, 100 to 240 VAC power SR2P-06 Relay socket, DPDT pin type, DIN/surface mount ATXINS Hooded solder-type socket for flush panel mount
1360 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS SCR POWER CONTROLLER R820 SERIES
DESCRIPTION The R820 Series SCR (Silicon Control Rectifier) controllers provide cost effective modulation of electric loads using industry standard proportional control signals from thermostats or building automation systems . The R820 Series incorporates a compact control board mounted to a multi-fin, anodized heat sink with an exceptionally high heat dissipation rate . Models are available in single phase or 3-phase and can control loads up to 600V . NEWFEATURES ! • Compact, microprocessor-based controller saves space in control panels • Integrated, self-resetting thermostatic protection increases safety • Multi-input control signal maximizes application and R820 system flexibility • Integral heat sink minimizes installation time and wiring costs • Status LED confirms proper operation
SPECIFICATIONS DIMENSIONS Supply Voltage 24 VAC, +10%/-15%, 50/60 Hz; Supply VA 2 VA Use Class 1 (properly fused) R820 Single Phase A Weight (LBS) or Class 2, CSA or UL recognized transformer R820-211 4.5” 1.80 Input Signal 0-10 VDC (2-10 VDC control range), R820-321 4.5” 1.80 4-20 mA, 0-135 Ω, R820-341 6.5” 2.40 dip switch selectable R820-421 4.5” 1.80 THERMOSTATS & CONTROLLERS low signal = no heat R820-441 6.5” 2.40 high signal = full heat R820-471 10.0” 3.50 Input Impedance R820-621 4.5” 1.80 Voltage 10K Ω R820-641 6.5” 2.40 Current 250 Ω R820-671 10.0” 3.50 Thermostatic Protection Cuts off at rise to 180°F (82°C), self- R820 Three Phase A Weight (LBS) resetting R820-213 6.5” 2.60 Operating R820-323 10.0” 3.70 Temperature 32° to 95°F (0° to 35°C), full rating, R820-343 10.0” 3.70 amperage de-rated up to 175°F R820-423 6.5” 2.65 (80°C) R820-443 10.0” 3.70 Operating Humidity 0 to 95% RH (non-condensing) R820-623 6.5” 2.65 Approvals CSA; UL, File #E191074 10.0” Warranty 1 year R820-643 3.70
DIMENSIONS Amp Calculation SINGLE PHASE Single Phase kW x 1000/E x PF 21 Three Phase kW x 1000/1 .73 x E x PF 5.25" 5.25" 3.00" E = Voltage 3.00" PF = Power factor
Cutout Template 5.75" A Cutout A template 3.75"
2.00" 2.00" March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1361 THERMOSTATS & CONTROLLERS SCR POWER CONTROLLER R820 SERIES
WIRING
INPUT SIGNAL SWITCH #1 SWITCH #2 SWITCH #3 SWITCH #4 0 to 10 VDC control signal (2 to 10 VDC control range) Off Off Off On 4 to 20 mA control signal Off Off On Off 0 to 135 Ω control signal NEWOn On Off Off ! To load (controlled leg) 2 VDC = 0% capacity 0 VDC = 0% capacity 4 mA = 0% capacity 0 Ohms = 0% capacity 10 VDC = 100% capacity 20 mA = 100% capacity 135 Ohms = 100% capacity 10 VDC = 100% capacity
Common
24 VAC
Input Common W
24 VAC R 0 to 10 VDC B output
0-10 VDC 2-10 VDC or 0-135 Ω To load Thermostat Control 4-20 mA from BAS Thermostat Control (controlled leg) 2nd SSR on 3 phase models only To load (uncontrolled leg)
CAUTION: HIGH VOLTAGE WIRING - High voltages are present at the terminals of these devices; follow the installation instructions carefully. All wiring must conform with national and local electrical codes.
ORDERING INFORMATION MODEL DESCRIPTION 021-0474 Replacement circuit board R820-211 SCR power controller 240V, 10A, single phase R820-213 SCR power controller, 240V, 10A, 3 phase R820-321 SCR power controller 347V, 25A, single phase R820-323 SCR power controller 347V, 25A, 3 phase
THERMOSTATS & CONTROLLERS R820-341 SCR power controller 347V, 45A, single phase R820-343 SCR power controller 347V, 45A, 3 phase R820-421 SCR power controller 480V, 25A, single phase R820-423 SCR power controller 480V, 25A, 3 phase 21 R820-441 SCR power controller 480V, 45A, single phase R820-443 SCR power controller 480V, 45A, 3 phase R820-471 SCR power controller 480V, 75A, single phase R820-621 SCR power controller 600V, 25A, single phase R820-623 SCR power controller 600V, 25A, 3 phase R820-641 SCR power controller 600V, 45A, single phase R820-643 SCR power controller 600V, 45A, 3 phase R820-671 SCR power controller 600V, 75A, single phase
ACCESSORIES 021-0474 Replacement circuit board
1362 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS SETPOINT CONTROLLER UCM-420A
DESCRIPTION The Model UCM-420A is a low cost microprocessor- based Proportional plus Integral (PI) controller that may be used for a wide variety of control applications . All setup and programming is done by DIP switches and bottle plug jumpers on the Model UCM-420A . Set points may be local and/or remote . The output may be direct- or reverse-acting .
FEATURES • PI control NEW• DIP switch/jumper programming ! • Selectable throttling range • Selectable integral reset rate • Direct or reverse-acting • Setpoint potentiometer on unit • Optional DIN rail mounting UCM-SPA-50-90F • Optional setpoint potentiometer with stainless steel UCM-420A wall plate (UCM-SPA)
MODES OF OPERATION Setpoint Controller #1, may be used to adjust the setpoint . The local setpoint The UCM-420A input monitors the process being controlled . will have authority to adjust the setpoint ±12 .5% of the input This input may be a 4-20 mA or 1-5 VDC signal from a pressure range . If the local setpoint is from a Precon ST-S3E-XA, it will sensor, flow transmitter, temperature sensor, etc ., or an input have authority to adjust the setpoint ±9 4%. of the input range . from a Precon Type III temperature thermistor . Then, the UCM- Sample and Hold 420A provides a 4-20 mA PI output signal to control a valve, The UCM-420A may be used to monitor a 4-20 mA or 1-5V THERMOSTATS & CONTROLLERS VFD, damper, etc ., based on a setpoint as described below . control signal . If the signal being monitored is lost, the UCM- 1. Local setpoint controller- The potentiometer mounted 420A will hold the last valid value for the signal until the signal on the unit may be used to control the setpoint . The local returns . setpoint may also be a UCM-SPA setpoint potentiometer, the Pulse Width to 4-20 mA Converter setpoint option of a Precon Model ST-S3EXA temperature sensor, a 4-20 mA signal, or a 1-5 VDC signal . The UCM-420A may be used to convert a time-based pulse- width AC or DC signal to a 4-20 mA output . 2. Remote setpoint controller- In this mode, the setpoint signal may be a 4-20 mA, 1-5 VDC, or time-based pulse- 4-20 mA Signal Generator width signal from a BAS controller . If the device to be controlled by the UCM-420A needs to be 3. Remote setpoint controller with local adjustment- The calibrated before the system is started up, the UCM-420A may UCM-420A accepts a remote setpoint signal as described be used to generate a 4-20 mA output in one mA increments . above in #2 . Then, a local setpoint signal, as described in
SPECIFICATIONS Supply Voltage 24 VAC/VDC ±10% LED Status Supply Current 130 mA maximum @ 24 VAC, 65 mA Green Power maximum @ 24 VDC Red PWM output Remote Setpoint Input 4-20 mA, 1-5 VDC, PWM Accuracy ±1% Local Setpoint Input 4-20 mA, 1-5 VDC, three-wire Remote Setpoint Potentiometer 21 potentiometer or PreCon two-wire UCM-SPA 0-10kΩ potentiometer (ST-S3E-XA) Enclosure UL94V-0 PWM Time Base 0 .1-2 .65, 5 .2, 12 85,. 25 .6, or 0 .59- Operating Temperature 32° to 158°F (0° to 70°C) 2 .93 sec Operating Humidity 5 to 95% (non-condensing) Analog Output 4-20 mA sourcing Weight Output Resolution 255 steps UCM-420A 1 3. lb (0 .61 kg) Output Burden 650Ω maximum UCM-SPA 0 75. lb (0 .34 kg) Input 4-20 mA, 1-5 VDC or PreCon RoHS Statement Yes Type III thermistor (thermistor range Warranty 18 months 50° to 90°F) Input Impedance 250Ω (mA signal), 10 k (voltage signal)
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1363 THERMOSTATS & CONTROLLERS SETPOINT CONTROLLER UCM-420A
WIRING
UCM-420A DIP SWITCH SETTINGS 123456 78 MUX TIME PROP A B3 B4 B5 ADDR B6 B7 B8 BASE A6 A7 A8 T.R. 0 0 0 1 0 0 0 2.65 0 0 0 10% 123456 78 0 0 1 2 0 0 1 5.2 0 0 1 20% 0 1 0 3 0 1 0 12.85 0 1 0 35% B BAS Controller 0 1 1 0 1 1 25.6 0 1 1 4 50% PWM Contacts 1 0 0 5 1 X X .59-2.93 1 0 0 65% 1 0 1 6 1 0 1 80% STATUS RESET LED 1 1 0 7 A4 A5 PER MIN 1 1 0 90% 1 1 1 1 1 1 8 0 0 OFF 100% TE NEW! PWM 1 INPUT + 24 VAC/VDC PWM signal from BAS 0 1 0.5 2 PWM Remote “1” MEANS “0” MEANS REMO SETPOINT – (only if remote setpoint is PWM) 1 0 1 INPUT TURN SWITCH ON TURN SWITCH OFF 3 REM SPT Setpoint INPUT 1 1 2 SEE + 4-20 mA or 1-5V remote setpoint signal 4 LOC SPT (if used) 5 POT + LOCAL – SWITCH OFF SWITCH ON (only if remote setpoint is analog signal) 6 LOC SPT SETPOINT
LOCAL SETPOINT INPUT A3 REVERSE ACTING DIRECT ACTING LOC SPT WIRING 7 POT – BELOW
A2 CK BOTH OFF >> REMOTE SETPT LOCAL SETPT ENABLE 8 FEEDBK INPUT + A1 SAMPLE AND HOLD MODE REMOTE SETPT ENABLE 9 4-20 mA, 1-5V or Thermistor input signal 10 24 PWR –
B1 BOTH OFF >> ANALOG PWM REM SETPT SGLE UNIT FEEDBA COMMON B2 REMOTE SET POINT PWM REM SETPT MUX MODE 11 – 4-20 mA sourcing output signal to 12 MA SIG OUTPUT + controlled device + – 24 VAC/VDC power
LOCAL SET POINT WIRING OPTIONS DIMENSIONS
0.7 in (1.78) LOCAL SETPOINT WIRING OPTIONS (cm) Increase setpoint (black) Local setpoint potentiometer + Three-wire potentiometer 3.4 (green) Local setpoint input (5K to 50K MAX) local setpoint Optional (8.64) (red) (10K factory installed) DIN rail Local setpoint potentiometer – adapter 4.0 (10.16)
Local setpoint potentiometer + + Local setpoint input Local setpoint (Factory setting) 4.6 4-20 MA or 1-5V Local setpoint potentiometer – – (11.68)
4.8 Common (12.19)
Setpoint knob Local setpoint potentiometer + Local setpoint input Two-wire potentiometer local Local setpoint potentiometer – setpoint 2.0 (XA option on Precon ST-S3E-XA (5.08) Increase setpoint thermistor) Common 2.75 (6.99)
ORDERING INFORMATION THERMOSTATS & CONTROLLERS
MODEL DESCRIPTION UCM-420A Setpoint controller with local setpoint potentiometer 21 OPTIONS 47 DIN rail mount (must be factory installed)
UCM-420A 47 Example: UCM-420A-47 Setpoint controller with DIN rail mounting
RELATED PRODUCTS UCM-SPA Setpoint potentiometer, 0-10 kΩ, three-wire potentiometer on stainless steel plate for remote mounting, 0-100% setpoint UCM-SPA-50-90F Setpoint potentiometer for 50° to 90°F UCM-SPA-C Custom range setpoint potentiometer (specify at time of order, must match range of device wired to feedback input)
1364 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS PROPORTIONAL ROOM THERMOSTAT RTC-2P
DESCRIPTION The Model RTC-2P Room Thermostat Proportional Controller features two proportional outputs (heating and cooling) . The proportional plus Integral (PI) control is suitable for pressure dependent VAV box control, as well as fan coil, baseboard, or air handler applications . The occupant controls include a digital display and buttons for setpoint adjustment and night setback/setup override . The Model RTC-2P comes with a remote setback input for use with BAS systems and a changeover input for one-pipe system applications . Field NEWsetup is through push buttons with adjustments! for setback temperatures, deadband, and °F or °C display .
FEATURES • Digital display for °F or °C • Set point adjustment buttons • Night setback manual button or clock input • Remote sensor input • Changeover input RTC-2P • Two proportional outputs heating and cooling • PI control algorithm • 0-10V or 2-10V outputs THERMOSTATS & CONTROLLERS APPLICATION The stand-alone Model RTC-2P is ideal for use when a central temperature control system may not be possible . Applications include any pressure-dependent VAV box control . The H/C output can also be used for modulating control of room-based discharge air, fan coil valves, or baseboard heat .
SPECIFICATIONS Supply Voltage 24 VAC ±20%, 50/60 Hz Display 0 35". (0 .89 cm), two-digit LCD Supply VA 3 VA Proportional Band Outputs Proportional, 2-10V standard, 0-10V Cooling 1 8°F. (1 .0°C) configurable (install 42K resistor in Heating 2 7°F. (1 .5°C) R14/R15) Reset Integral Time 15 minutes Control PI algorithm Changeover Contact or 80°F (26 6°C). with a Inputs Type III thermistor Remote sensor 10K Type III thermistor Deadband -1 .8° to 9 .0°F (-1 .0° to 5 .0°C) Changeover Contact or thermistor, Type III Dimensions 4 0"H. x 4 .9"W x 1 .2"D Setback Isolated 24V contact (12 .45 x 10 .16 x 3 .05 cm) 21 Shutdown Isolated 24V contact Weight 0 45. lb (0 .2 kg) Controls Setpoint buttons up/down, Setback- RoHS Statement Ye s enable button or 30 minute override Warranty 1 year Range 40° to 90°F (4° to 32°C)
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1365 120 VAC 24 VAC TB1 TB2 1 17 C Remote Shutoff TB1-1 = Common TB2-17 = Common Contact Cooling 2 16 L1 TB1-2 = 24 VAC TB2-16 = Remote Shutoff Actuator Yc Remote Sensor 3 15 Type III TB1-3 = Cooling 0-10V* TB2-15 = Remote Space Sensor 10 kΩ Thermistor TB1-5 = N/C TB2-14 = Remote Space Sensor Heating 5 14 Actuator Yh 8 13 Changeover TB1-8 = Heating 0-10V* TB2-13 = Heat/Cool Changeover Contact or TB1-9 = Setback, remote TB2-12 = Heat/Cool Changeover Type III Night L1 9 12 10 kΩ Thermistor (TB1-1 and TB2-17 are connected internally.) Setback (closed for heating) Contact C * 0-10V or 2-10V selectable by 42.2K resistor installation; (openTHERMOSTATS for NSB) RTC-2P & CONTROLLERS resistor provided PROPORTIONAL ROOM THERMOSTAT RTC-2P
WIRING
** 120 VAC 24 VAC TB1 TB2 Separate C Remote * 0-10 VDC or 2-10 VDC selectable. transformer 1 17 shut-down contact Install 42 kΩ resistor across R14/R15 for 0-10 VDC output. recommended Cooling 2 16 L1 Actuator Yc Remote sensor assumes ** If one common transformer is used, the actuators ** 3 15 J4 open, must use 1/2 wave rectified power, and polarity type III J5 closed 5 14 10 kΩ thermistor must be observed. Heating Yh NEW! Actuator 8 13 Changeover contact TERMINALS 9 (closed for heating) External Clock Input L1 12 or TB1-1 = Common TB2-17 = Common assumes Night Type III thermistor TB1-2 = Hot 24 VAC** TB2-16 = Remote shut off C above 80°F heating J2 closed setback below 65°F cooling TB1-3 = Cooling 0-10V* TB2-15 = Remote space sensor contact TB1-5 = N/C TB2-14 = Remote space sensor (open for night setback) TB1-8 = Heating 0-10V* TB2-13 = Heat/Cool changeover TB1-9 = Setback, remote TB2-12 = Heat/Cool changeover (TB1-1 and TB2-17 are connected internally) (42 kΩ Resistor provided)
BOARD LAYOUT
Resistor Sockets for R14, R15 (42 .2K 1%) Q1 R14 R15
Vmax Vmin SETBACK
S1 S2 S3
VALUEVALUE UP DOWN SPACE T USER S4 S5 UP STBCK TB1 TB2 J1J2J3 S6 S6 F/C PRO ADJ 1 17 EXT SPACE T OVRD DEADBD 2 16 DOWN ADJ LED S10 SETBACK S8 3 15 GREEN Vhtg J4J5 5 14 24 VAC S9 8 13 COM FPM 0-10V J4/5 SELECT Yc 0-10v INT/EXT 9 12 SPACE SNSR
SPACE TEMP SENSOR THERMOSTATS & CONTROLLERS
21 ORDERING INFORMATION
MODEL DESCRIPTION RTC-2P Room temperature controller, two-output H/C proportional thermostat
RELATED PRODUCTS PAGE ST-R3S Pipe strap-on sensor 10K Ω Type III thermistor 1253 ST-S3E Room sensor 10K Ω Type III thermistor 1171 ST-U3 Universal duct and immersion sensor 10K Ω Type III thermistor 1228
1366 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS TWO-POSITION ROOM THERMOSTATS ET SERIES, UT8001
DESCRIPTION The ET Series Two-Position Room Thermostat are designed for on/off control with set points from 50° to 90°F . The ET5-S-1S Series is a heating-only thermostat and uses a snap-acting switch for line or low voltage applications . The ETD5-S-1S Series is a heating/cooling thermostat and uses a snap-acting switch for line or low voltage application . Model UT8001 Two-Position Room Thermostat are designed for low voltage on/off control of a manually selected heating or cooling applications . It operates with set points from 50° to 90°F from a bi-metal and magnetic reed switch . Fan switching NEWincludes manual On/Auto control . ! FEATURES • Line or low voltage ET5 heating ETD5-S-1S UT8001 • Line or low voltage ETD5 heating/cooling • Low voltage UT8001 with fan and system switch has Conventional single or dual transformer with adjustable anticipator Two position or mV operation, thermometer, and vertical or Line or Low Voltage horizontal mounting
SPECIFICATIONS
Model Supply Voltage Supply Current Switch Contact Type Differential Dimensions 4.75"H x 2.75"W x 2.75"D ET5-S-1S 24-277 VAC 22A None SPST, snap acting Heating 2°F (12.1 x 7.0 x 7.0 cm) Heating 2°F, Cooling 4.75"H x 2.75"W x 2.75"D ETD5-S-1S 24-277 VAC 22A None SPDT, snap acting 4°F (12.1 x 7.0 x 7.0 cm) Heating 3°F, Cooling 4.75"H x 2.75"W x 1.5"D UT8001 24 VAC 1A Fan and system Magnetic reed 3°F (12.1 x 7.0 x 3.8 cm)
Setpoint range 50° to 90°F (10° to 32°C) Weight 0 .5 lb (0 .23 kg) THERMOSTATS & CONTROLLERS Anticipator UT8001 only (0 .1A to 1A) Approvals UL Listed File #E46315; CSA (ET5), cUL Control type Two-position, on/off (UT8001) Mounting 2" x 4" (5 .1 x 10 .2 cm) vertical switch box Warranty 2 years
WIRING Fan control (set up J1) Cooling control Transformer (cool if used remove J2) Heat control Transformer (heat) NC NC 4W NO C G YRC W RH J2 C G/O E J1 G/O = gas or oil (fan delay) J2 off = two transformers E = electric (immediate fan) J2 on = one transformer UT8001 C-N.C. open on temperature rise Open on temperature rise AUTO 21 ET5-S-1S C-N.O. close on temperature rise COOL ETD5-S-1S OFF OFF HEAT ON
ORDERING INFORMATION MODEL DESCRIPTION ET5-S-1S Line or low-voltage heating thermostat ETD5-S-1S Line or low-voltage heating or cooling thermostat UT8001 Low-voltage thermostat with fan and system switch
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1367 THERMOSTATS & CONTROLLERS LINE-VOLTAGE THERMOSTAT T22, T25, T26, T46
DESCRIPTION These thermostats are designed for line-voltage control of residential, commercial, or industrial heating or year-round air conditioning . A liquid-charged temperature sensing element, highly efficient diaphragm, and lever provide precise temperature control . Anticipators are not required . Model T26 is a line-voltage thermostat for heating or cooling and includes horizontal mounting faceplate kit . NEW! Model T25 is a line-voltage two-stage thermostat . Applications include two stages of heating or cooling or auto changeover control of heating and cooling . Model T22 is a line-voltage thermostat with a system selector switch for off/auto or heat/off/cool operation . T46 T26 Model T46 is a line-voltage, heating, cooling or heating/ cooling thermostat with integral system and fan switching . It is designed to control line-voltage fan coils or zone valves .
FEATURES • Knob or concealed set point adjustment • Line- or low-voltage control • UL listing • Mounts on standard single- or double-gang box • Bimetal thermometer • Ideal for fan coil applications T22 T25
SPECIFICATIONS Thermostat Range 40° to 90°F (5° to 30°C) Approvals UL Listed File #E6688/XAPX Mounting Separate mounting plate Weight 1 30. lb (0 .59 kg) Sensing Element Liquid filled for positive trouble-free Warranty 1 year operation (anticipator not required) Thermometer 50° to 90°F (10° to 30°C), bimetal type may be field calibrated
THERMOSTATS & CONTROLLERS ELECTRICAL RATINGS T22, T25, T26, T46 Thermostats, (T26T-3, T22T) Heavy Duty Thermostat 21 Pilot Duty and Motor Ratings 120V 208V 240V 277V AC full load amp 6 (8) 3.4 (8) 3 (8) T25-125 VA pilot duty AC locked rotor amp 36 (48) 21 (48) 18 (48) - AC non-inductive amp 6.5 (10) 6.5 (10) 6.5 (10) 6.5 (10) not T46 or T25 T46 System and Fan Swith Rating Only Switch Rating 120V 208V 240V 277V AC full load amp 12 6.9 6 5.2 AC locked rotor amp 34.8 19.1 17.4 14.4
1368 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS LINE-VOLTAGE THERMOSTAT T22, T25, T26, T46
WIRING Action on Relay or increase in Manual or Switch T22AAA Action on increase Automatic Cool temperature Heat Changeover h H C H C AUTO in temperature Switch DPDT High Stage Low Stage (red) To Heating OFF 3 3 3 Cool To Heating Y Y lue) H L (black) (black) (red) Heating 2 1 (b y) system L1 (hot) (lt blue) L 1 (hot) y) (blue) To Cooling To Cooling (gra (gra 2 2 2 high (orange) high (orange) BH B L (violet) T22JAA Heat med (yellow) med (yellow) h To Fan AUTO 1 1 1 To Fan RH R L low (brown) low (brown) OFF Common neutral neutral Cooling 1 2 system T26 Heat/off/cool selector switch Off/auto selector switch with fan speed Comes with jumper T22SFB with fan speed control, control and manual or automatic changeover OFF OFF (remove as needed) switch, heating and cooling T22TFB h heating and cooling NEWT25 ! T46SDA H/C T46SAA system 3 1 2
DIMENSIONS
2.81 2.96 2.96 1.86 0.41 1.88 0.91 0.25 1.5 1.16 in (7.14) (7.52) (7.52) (4.72) (1.0) (4.8) (2.3) (0.64) (3.81) (2.95) 0.60 0.60 (cm) (1.52) (1.52)
1.2 (3.05) 1.2 (3.05)
5.21 4.71 4.71 (13.23) (11.96) (11.96) 2.34 3.27 2.34 3.27 (5.94) (8.31) (5.94) (8.31) T22, T25 T26 T46
4.84 T22 T25, T26, T46 (12.29) Single-gang box Double-gang box Front ViewFront View Side View THERMOSTATS & CONTROLLERS
ORDERING INFORMATION
MODEL ADJUSTMENT SELECTOR DIFFERENTIAL ˚F (˚C) WEIGHT APPLICATION TYPE SWITCH lb (kg) HEATING COOLING T46SDA-1 Knob Heating or cooling Off/Auto 0.7 (0.4) 0.7 (0.4) 1.3 SPDT Low/Med/High (0.59) T46SAA-1 Knob Heating and cooling Heat/Off/Cool 0.7 (0.4) 0.7 (0.4) 1.3 SPDT Low/Med/High (0.59) T26S-18* Knob Heating or cooling None 1.75 (1.0) 2.25 (1.3) 1.0 SPDT (0.45) T26T-3* Knob Heating or cooling None 3 (1.7) 3 to 4 1.0 SPDT, heavy-duty (1.7 to 2.2) (0.45) T25A-1 Knob Two-stage 2 SPDT switches, 1.75 (1.0) 2.25 (1.3) 1.5 two-stage heating, cooling, or one- None (0.68) T25A-16 Concealed stage heating and one-stage 3 between stages (1.7) 1.5 cooling (0.68) T22AAA Knob Heating Only Off/Auto 0.7 (1) N/A 1.3 SPST (0.59) T22JAA Knob Cooling Only Off/Auto N/A 2.25 (1.3) 1.3 SPST (0.59) 21 T22SFB Knob Heating and cooling Heat/Off/Cool 1.75 (1) 2.25 (1.3) 1.3 SPDT (0.59) T22TFB Knob Heating and cooling Heat/Off/Cool 3 (1.7) 3 to 4 1.3 SPDT (1.7 to 2.2) (0.59) *Includes faceplate for horizontal mounting. The plate is for on-the-job installation over a vertical plate. Field convert to other configurations.
ACCESSORIES PLT333-12R T26 and T46 vertical plate with no adjust knob and no thermometer PLT333-3R T26 and T46 vertical plate with thermometer and no adjust knob PLT333-9R T26 and T46 horizontal plate with no adjust knob and no thermometer
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1369 THERMOSTATS & CONTROLLERS PECO FLOATING AND PROPORTIONAL THERMOSTATS T158, T168 SERIES
DESCRIPTION The T158 Series is a microprocessor-based floating or two-position low voltage thermostat . The T168 Series is a microprocessor-based proportional 4-20 mA or 0-10V thermostat . Both series are designed for fan coil and air handler applications for both two- and four-pipe systems . The processor provides control algorithms for precise stable control under varying capacity and load conditions without the need for field calibration or tuning . These versatile thermostats have options for a variety of high voltage fan NEW! and system switching . Models are also available with an TB-158-100 unoccupied setback input . Terminations are provided for remote sensors for both air and water temperature . DIMENSIONS
FEATURES in 1.0 (cm) (2.54) • Electronic Proportional plus Integral (PI) control Two Mounting Slots • Two-position, floating, and proportional control models 0.16 x 0.36 • Remote sensor capability (0.41 x 0.91) 2.75 0.5 (1.27) • Optional unoccupied control inputs (6.99) • Fan and system switching models Opening for Wiring • °F or °C digital display • Built-in start up diagnostics 0.34 (0.86) • Seasonal changeover models 2.1 (5.33) • Four selection service menu 3.3 (8.38) 4.5 (11.43)
SPECIFICATIONS T158 T168 Supply Voltage 20-28 VAC 20-28 VAC Supply Current 25 mA @ 24 VAC 25 mA @ 24 VAC Control Type Two-position or floating Proportional 4-20 mA, 600Ω load, 0-10 VDC, 1000Ω min Output Capacity 10 VA @ 24 VAC (Triac) 10 VA @ 24 VAC (Triac) , (Heating/Damper/Demand) Stroke Time 30-300 sec (120 sec default) 30-300 sec (120 sec default) Temperature Offset ±5°F (0° default) ±5°F (0° default) Fan Demand Delay 0-10 min. (0 default) 2-10 min. (2 default) Cooling Minimum Off 30-600 sec (120 sec default) 30-600 sec (120 sec default) Fan Switching 24 VA @ 24 VAC , 125 VA @ 120 VAC 24 VA @ 24 VAC, 125 VA @ 120 VAC Setpoint With Setback 50° to 90°F (10° to 32°C) 50° to 90°F (10° to 32°C) Proportional Band 2°F (1°C) 2°F (1°C) Heat/Cool Deadband 3°F (1.6°C) 3°F (1.6°C) Material Of Construction Flame-retardant PVC, UV stabilized Flame-retardant PVC, UV stabilized Color Cool gray Cool gray Display 0.36" (0.9) LCD (°F or °C) 0.36" (0.9) LCD (°F or °C) Weight 0.28 lb (0.13 kg) 0.28 lb (0.13 kg) Approvals UL-recognized component File# E50023, CE UL-recognized component File# E50023, CE Warranty 5 year 5 year THERMOSTATS & CONTROLLERS T168 WIRING TA168 T168 Program Jumpers and Switch Settings L1 (hot) 1 Off On 2 Lo Line Voltage Med L2 or Neutral Dip Switch Switch Open Switch Closed
Connections 3 Fan 123456 21 Hi #1: Not used Not used 4 #2: Electric heat (on at setpoint) Staged heat (on at maximum output plus 1°F) 5 #3: °C display °F display 6 #4: 4-20 mA output 0-10 VDC output Setback Input Normal operation 7 24 VAC #5: Must be “ON” 8 Transformer #6: Setback Setback OFF ON 9 Clg (DA) Heating 60°F (15°C) Heating 50°F (10°C) Low Voltage 0-10 VDC Cooling 90°F (32°C) 10 Htg (RA) Cooling 85°F (29°C) Connections or 4-20 mA 0-10 VDC 11 or 4-20 mA Notes: 1. Units have a three-minute warm up. Jumpers 12 Demand Output External Relay 2. Cycle power after dip switches are Jumpered I.D. Unjumpered 13 Aux changed. Heat 14 On/Off Local sensor JP1 Remote sensor Damper Remove JP1 Two pipe JP2 Four pipe 15 for Remote Sensor Optional Remote Probe Not used JP3 Not used 16 * If the changeover probe is used Cooling 0-10 VDC JP4 Cooling 4-20 mA 17 * Optional Remote Changeover Probe on a cold pipe, the control is as Heating 0-10 VDC JP5 Heating 4-20 mA shown above on the outputs. If the Typical Wiring for Proportional Control changeover probe is on a hot pipe, Notes: JP 4 and 5 must both be the same. it reverses the action of the cooling Two pipe disables terminal 11. output above. Heating is disabled. 1370 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS PECO FLOATING AND PROPORTIONAL THERMOSTATS T158, T168 SERIES
T158 WIRING
L1 (hot) TA158 (1H/1C) TH158 (Heat Pump) 1 Lo N/C 2 1 Line-voltage Med L2 or Neutral N/C *HI fan speed required connections 3 Fan 2 Fan HI* Hi 3 acc. cover C158FAOH 4 Auto/ON Tr iac 4 Fan Low-voltage 5 Low voltage connections 6 Setback input All low voltage 5 7 24 VAC connections Cool 6 Setback input 10 transformer 7 24 VAC Heat output O-Cooling Tr iac 11 External relay or Tr iac 10 transformer N/C output B-Heating reversing vlv control 12 spring return actuator control 11 N/C reversing vlv Y1-Cooling External relay 13 12 N/C W1-2nd heat comp. output 14 Remove JP1 13 15 for remote sensor N/C output Type 24 14 16 Optional remote probe 15 Remove JP1 17 *JP4 Installed = Two pipe for remote sensor Optional remote changeover probe 16 Optional remote probe Type 24 Uninstalled = Four pipe 17 N/C Type 24 NEWTypical Wiring for On/Off Control! Typical Wiring for On/Off Control
TB158 (Floating) L1 (hot) L1 (hot) TB158 (Two-Position) 1 1 Lo Lo Line-voltage 2 2 Med L2 or Neutral Line-voltage Med L2 or Neutral connections 3 Fan connections 3 Fan Hi Hi 4 4 Low-voltage 5 Low-voltage 5 connections 6 connections Setback input 6 7 24 VAC 7 Setback input Open 24 VAC 10 Cool transformer 10 Cool Open ^ output transformer 11 output Tr i-state actuator 11 1st heat Tr iac Close ^ Tr iac 12 12 output Demand External relay or control Close Heat External relay or control spring return actuator 13 output^ spring return actuator 13 2nd heat output On/Off only output 14 Remove JP1 14 On/Off Remove JP1 damper damper 15 for remote sensor 15 for remote sensor Type 24 Type 24 16 Optional remote probe 16 Optional remote probe *JP4 Installed = Two pipe 17 17 *JP4 Installed = Two pipe Optional pipe changeover probe Uninstalled = Four pipe Optional remote changeover probe Type 24 Uninstalled = Four pipe Type 24 Typical Wiring for Three-Wire Floating Control Typical Wiring for On/Off Control TC158 (2H/1C) T158 Program Switch Settings 1 N/C N/C *HI fan speed required 2 Control Off On Fan HI* acc. cover C158FAOH Dip Switch 3 Function Switch Open Switch Closed
Auto/ON 123456 Tr iac 4 Fan #1: Heating action DA (N.O.)** RA (N.C.)** (only used when #4 is off) Low voltage #2: Cooling action RA (N.O.)** DA (N.C.)** (only used when #5 is off) All low voltage 5 #3: Temp display °C °F connections 6 Setback input #4: Heating signal ON/OFF Modulating 3-Wire 7 1st cool 24 VAC #5: Cooling signal ON/OFF Modulating 3-Wire Tr iac 10 transformer OFFON THERMOSTATS & CONTROLLERS 1st heat output #6: Unocc setpoints 60/85°F 50/90°F control 11 output Demand External relay or (15/29°C) (10/32°C) 12 output spring return actuator 2nd heat Notes: 1. Units have a three-minute warm up. * If the changeover probe is used 13 output 14 N/C 2. Cycle power after dip switches are on a cold pipe, the control is as Remove JP1 changed. shown above on the outputs. If the 15 for remote sensor 16 Optional remote probe Type 24 changeover probe is on a hot pipe, 17 N/C it reverses the action of the cooling output above. Heating is disabled. ** Refers to valve or damper position Typical Wiring for On/Off Control N/C = no connection
ORDERING INFORMATION PART NUMBER CONTROL OUTPUTS USER CONTROL 2 PIPE / 4 PIPE NEW OLD PROPORTIONAL FLOATING ON/OFF HEAT PUMP DAMPER DEMAND FAN^ SYSTEM MODE CHANGE OVER MODEL MODEL 4-20 mA/0-10V TRIAC TRIAC TRIAC OCC/UNOCC OUTPUT SWITCHING SWITCHING PROBE INPUT TA158-100^ ------1H/1C ------O/H/M/L* Heating/Cooling/Auto/Off Ye s, 2 or 4 pipe TB158-100^ ALL TB158 -- 1H/1C [2H]/(1C)*** -- 1-Triac (1-Triac)*** O/H/M/L* Heating/Cooling/Auto/Off Ye s, 2 or 4 pipe TC158-100^ ------2H/1C -- -- 1-Triac Auto/On** Heating/Cooling/Auto/Off No, 4 pipe only TH158-100^ ------1H/1C 1O/1B -- 1-Triac Auto/On** Heating/Cooling/Auto/Off No, 4 pipe only TA168-100^ ALL TA168 1H/1C -- 2nd Heating 1-Triac 1-Triac O/H/M/L* Heating/Cooling/Auto/Off Ye s, 2 or 4 pipe ^ Changing the cover on T158 and T168 thermostats may change or eliminate the fan switching (See accessories C158-_ _). (New models only) * O/H/M/L = Off/High/Medium/Low, 24-277V fan contacts, Off shuts down the thermostat with no display. ** Auto/On = Fan is automatically on during equipment demand or On always, 24 VAC low-voltage control. No O/H/M/L operation. *** Alternate outputs based on DIP switch [4 heating] and (5 cooling). Switches 4 and 5 are independent. See TB158 wiring diagrams above depending on switch settings. Note: All Tr iac outputs are 24 VAC with 24 VAC potential on disconnected terminals (open circuit condition). RELATED PRODUCTS 21 65345 Thermostat base plate, 4.75” x 4.75” CA158 Thermostat cover for TA158-100 without fan switch CA158-FFN Thermostat cover for TA158-100 with fan off/on switch CA168 Thermostat cover for TB168-100 with fan switch CA168-FFN Thermostat cover for TB168-100 with fan off/on switch CB158 Thermostat cover for TB158-100 without fan switch CB158-FFN Thermostat cover for TB158-100 with fan off/on switch CC158 Thermostat cover for TC158-100 with fan switch CC158-FAOH Thermostat cover for TC158-100 with fan auto/on/high switch CH158 Thermostat cover for TH158-100 without fan switch CH158-FAO Thermostat cover for TH158-100 with fan auto/on switch CH158-FHLA Thermostat cover for TH158-100 with fan high/low/auto switch
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1371 THERMOSTATS & CONTROLLERS FAN COIL THERMOSTAT WITH ADA-COMPLIANT DIGITAL DISPLAY T170
DESCRIPTION The T170 is specifically designed for 1H, 1C, on/off vent damper and multi speed fan control applications . The large ADA compliant backlit display shows temperature °F or °C with a simple push of a button and indicates fan and system status . The T170 is powered from 24-277 volts with direct-wired manual fan or auto-staging fan models . Remote temperature sensor, pipe change over sensor, setback input and occupancy sensor inputs are all standard . NEW!
APPLICATION Designed specifically for direct line-voltage or low voltage wiring of fan coils used for heating and cooling, with fan and T170-001 damper controls . Ideal for hotels, dormitories, retirement centers, resorts, condos, cottages, schools, vestibule entrances, and so on .
SE200-001 SA200-001 SB200-001
FEATURES • 1H/1C and On-Off vent damper • Keypad lockout • H/C/A/O system switching • 2-pipe auto purge cycle • Fan switch Auto/On/Off • 2-pipe or 4-pipe operation • L/M/H manual fan speed or fan auto staging models • Setback from occupancy or clock • 24-277 VAC power • Temperature or continuous set point display • Large backlit ADA compliant display/buttons • Temperature offset display • Occupancy motion detector inputs • Setpoint limits, H and C • Door switch or setback input • Fan off delay • Remote sensor and service alert input • H/C setback selection • Change over sensor input • Easy occupant switched °F or °C display
SPECIFICATIONS Supply Voltage 24-277 VAC, ±10%, 50/60 Hz Display 1" x 1 .5" backlit digital display room Supply Current 45 mA temp ., setpoint, system and fan Sensor Type Built-in 10K thermistor Type II status Remote Sensor 10K thermistor Type II, acc . required Display Offset ±9°F (5°C), in 1°F (0 .5°C) increments Output Control 6-SPST relays Button Controls H/C/Damper, Fan-L/M/H Up, Down Temperature select Output Amps System Heat/Cool/Auto/Off Fan Control On/Off/Auto Voltage RES LRA FLA HP
THERMOSTATS & CONTROLLERS Fan Speed Hi/Medium/Low, hold for °F/°C 120 VAC 6.0 34.8 5.8 1/4 Adjustments Service menu set up, 9 parameters Enclosure Vinyl plastic for indoor use only 240 VAC 5.0 17.4 2.9 1/4 Switch Cycles 100,000 cycles 21 Termination 6" flying leads 18-14 AWG 277 VAC 4.2 14.4 2.4 1/4 Color White Note: Combined load not to exceed Mounting Horizontal on wall . Screw direct or 20A 4" x 4" back box Operating Temperature 130°F (54°C) Maximum Control Proportional plus Integral (PI) Operating Humidity 98% RH non-condensing Dead-band 3°F (1 .6°C) Dimensions 4 4"H. x 5 .8"W x 1 .4"D Setpoint 50° to 90°F (10° to 32°C), adjustable (11 .2 x 14 7. x 3 5. cm) Setback (H/C) 55° to 90°F (13° to 32°C), adjustable Weight 0 7. lb (0 .32 kg) 8°F (4 .4°C) minimum separation Approvals UL, ULC, File# E50023 and ADA Keypad Lockout All buttons disabled except setpoint compliant Warranty 5 years
1372 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS FAN COIL THERMOSTAT WITH ADA-COMPLIANT DIGITAL DISPLAY T170
DIMENSIONS / MOUNTING
5.8 3.28 (14.73) (8.33)
F SETPOINT C SYSTEM AUTO COOL FAN ON SETBACK HEAT AUTO LOWMEDHI OFF 4.4 Wire 1.25 (11.17) Way (3.175)
1.50 SYSTEM FAN SPEED (3.81) NEWHOLD F/C !
Note: The cover snaps into place firmly, making occupant tampering difficult. Be sure to install jumpers, select voltage, and wire properly before snapping cover into place.
INSTALLATION / JUMPERS
JP4 JUMPER SELECTION CAUTION: HIGH VOLTAGE - REMOVE POWER BEFORE SERVICING OUTPUT OPERATION This jumper selects between 2-pipe (jumper ON) and 4-pipe (jumper OFF) 2/4 PIPE WATER MAIN SECONDARY operation. (Shipped OFF) SELECTION TEMP OUTPUT OUTPUT Cooling Only - DA JP3 JUMPER SELECTION Cold The fan will not cycle on Disabled This jumper is shipped normally open. with a heat demand. JP4 Placement of a jumper allows for 2-PIPE JP3 Occupancy Detection and Door Switch JP4 ON Heating Only - RA Only Operation. (Shipped OFF) Hot The fan will not cycle on Disabled * with a cool demand. JP1 JUMPER SELECTION Cold Cooling - DA Heating - RA SWITCH Removal of this jumper allows the 4-PIPE Heating Only - RA JP1 sensor to be located in a remote 24V 110- location, or N.C. service alarm. JP4 OFF Hot The fan will not cycle on Disabled 277V with a cool demand. (Shipped ON) THERMOSTATS & CONTROLLERS VOLTAGE SELECTION SWITCH* CIRCUIT BOARD This switch must be placed in the In Cover appropriate position prior to application *Switch selection is as follows: of power. (Shipped at 110-277V) 24V = 24 VAC; 110-277 V = 120, 240, or 277 VAC
WIRING ORDERING INFORMATIONT
Setback Input, JP3 removed. MODEL DESCRIPTION Open = occupied, closed = unoccupied T170 Door Switch, JP3 installed. TA170-001 24-277V, H/C/Dpr thermostat with system, fan, and Open when door is open. three-speed manual fan switch White/Black T Remote sensor probe, JP1 removed. TB170-001 24-277V, H/C/Dpr thermostat with system, and fan White/Yellow Service Alarm (Open = Normal), switch off/auto with three-speed auto staging fan JP1 installed. Circuit common oltage White/Violet on demand every 2° (2° differential)
w v T Pipe sensor WG (6" pigtails) Lo White/Blue Occupancy detector
18 A (Open = Occupied) RELATED PRODUCTS PAGE White/Gray THERMOS TAT CONNECTIONS 680-243-6 Changeover thermostat with conduit fitting Yellow L2 / NEUTRAL AQS00661 24 VAC/VDC water sensor/switch 572 Cool Blue (Main output) SA200-001 Ceiling 360-degree occupancy motion sensor, 21 Heat Note: Unused wires must Red (Secondary output) 24 VAC/VDC, form C contacts have their ends
G White/Brown Fan low taped, as they may SB200-001 Wall occupancy/motion sensor, 110-degree view,
oltage have live voltage on them from the 24 VAC/VDC, form C contacts White/Red Fan medium 14 AW thermostat. Plunger style door switch Line v SE200-001 White/Orange Fan high SE200-002 Magnetic door/window switch, N.C.-SPST Brown Outside air ST-R24S Changeover temperature sensor 1254 damper Black,14 AWG L1 ST-S24E Remote room temperature sensor 1171 T - Type 24 thermistor sensor
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1373 THERMOSTATS & CONTROLLERS PROGRAMMABLE FAN COIL THERMOSTAT T180 SERIES
DESCRIPTION The T180 Series is a 7-day, 4-event programmable FCU thermostat . The large ADA compliant backlit display shows temperature °F or °C with a simple push of a button and indicates fan and system status . The T180 is powered from 24-277 volts with direct-wired manual fan or auto-staging fan models . Remote temperature sensor, pipe changeover sensor, setback input and occupancy sensor inputs are all NEW! standard .
APPLICATION T180-001 Designed specifically for direct high voltage or low voltage wiring of fan coils used for heating and cooling, with fan and damper controls . Ideal for hotels, dormitories, retirement centers, resorts, condos, cottages, schools, vestibule entrances, and so on .
FEATURES SE200-001 SA200-001 SB200-001 • 7-day, 4-event schedule • 1H/1C and On-Off vent damper • Keypad lockout • H/C/A/O system switching • 2-pipe or 4-pipe operation • Fan switch Auto/On/Off • Setback from occupancy or clock • L/M/H manual fan speed or fan staging models • Temperature or continuous set point display • 24-277 VAC power • Temperature offset display • Large backlit ADA compliant display/buttons • Setpoint limits, H and C • Occupancy motion detector inputs • Fan off delay • Door switch or setback input • H/C setback selection • Remote sensor and service alert input • Easy occupant switched F or C display • Change over sensor input
SPECIFICATIONS Supply Voltage 24-277 VAC, ±10%, 50/60 Hz Button Controls Supply Current 45 mA Up, Down Temperature select Sensor Type Built-in 10K thermistor Type II System Heat/Cool/Auto/Off Remote Sensor 10K thermistor Type II, acc . required Fan Control On Hi-Med-Lo/Auto Hi-Med-Lo Output Control 6-SPST relays Program Clock-°F/°C-Set-Copy-Hold H/C/Damper, Fan-L/M/H Adjustments Service menu set up, 9 parameters Output Loads Enclosure Vinyl plastic for indoor use only Switch Cycles 100,000 cycles Voltage RES LRA FLA HP Termination 6" flying leads 18-14 AWG Color White 120 VAC 6.0 34.8 5.8 1/4
THERMOSTATS & CONTROLLERS Mounting Horizontal on wall . Screw direct or 240 VAC 5.0 17.4 2.9 1/4 4" x 4" back box Operating Temperature 130°F (54°C) 277 VAC 4.2 14.4 2.4 1/4 Operating Humidity 98% RH non-condensing Dimensions 4 4"H. x 5 .8"W x 1 .4"D 21 Note: Combined load not to exceed 20A (11 .2 x 14 7. x 3 5. cm) Approvals UL Listed File #E50023, ULC, Control Proportional plus Integral (PI) and ADA compliant Dead-band 3°F, (1 6°C). Warranty 5 years Setpoint 50° to 90°F (10° to 32°C), adjustable Setback (H/C) 55° to 90°F (13° to 32°C), adjustable 8°F (4 .4°C) minimum separation Keypad Lockout All buttons disabled except setpoint Display 1" x 1 .5" backlit digital display Room temp ., setpoint, system and fan status Display Offset ±9°F (5°C), in 1°F (0 .5°C) increments 1374 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS PROGRAMMABLE FAN COIL THERMOSTAT T180 SERIES NEWDIMENSIONS ! SYSTEM FAN PROGRAM
INSTALLATION / JUMPERS
JP4 JUMPER SELECTION CAUTION: HIGH VOLTAGE - REMOVE POWER BEFORE SERVICING OUTPUT OPERATION This jumper selects between 2-pipe (jumper ON) and 4-pipe (jumper OFF) 2/4 PIPE WATER MAIN SECONDARY operation. (Shipped OFF) SELECTION TEMP OUTPUT OUTPUT Cooling Only - DA JP3 JUMPER SELECTION Cold The fan will not cycle on Disabled This jumper is shipped normally open. with a heat demand. JP4 Placement of a jumper allows for 2-PIPE JP3 Occupancy Detection and Door Switch JP4 ON Heating Only - RA Only Operation. (Shipped OFF) Hot The fan will not cycle on Disabled * with a cool demand. JP1 JUMPER SELECTION THERMOSTATS & CONTROLLERS Cold Cooling - DA Heating - RA SWITCH Removal of this jumper allows the 4-PIPE Heating Only - RA JP1 sensor to be located in a remote 24V 110- JP4 OFF Hot The fan will not cycle on Disabled 277V location, or N.C. service alarm. (Shipped ON) with a cool demand. VOLTAGE SELECTION SWITCH* CIRCUIT BOARD This switch must be placed in the In Cover appropriate position prior to application *Switch selection is as follows: of power. (Shipped at 110-277V) 24V = 24 VAC; 110-277 V = 120, 240, or 277 VAC
WIRING ORDERING INFORMATION
Setback Input, JP3 removed. MODEL DESCRIPTION Open = occupied, closed = unoccupied T170 Door Switch, JP3 installed. TA180-001 24-277V, H/C/Dpr thermostat with system, fan, and Open when door is open. White/Black three-speed manual fan switch T Remote sensor probe, JP1 removed. TB180-001 24-277V, H/C/Dpr thermostat with system, and fan White/Yellow Service Alarm (Open = Normal), switch off/auto with three-speed auto staging fan on JP1 installed. Circuit common oltage White/Violet demand every 2° (2° differential)
w v T Pipe sensor WG (6" pigtails) Lo White/Blue Occupancy detector
18 A (Open = Occupied) White/Gray THERMOS TAT CONNECTIONS Yellow L2 / NEUTRAL RELATED PRODUCTS PAGE 21 Cool 680-243-6 Changeover thermostat with conduit fitting Blue (Main output) SA200-001 Ceiling 360-degree occupancy motion Heat Note: Unused wires must Red (Secondary output) have their ends sensor, 24 VAC/VDC, form C contacts
G White/Brown Fan low taped, as they may SB200-001 Wall occupancy/motion sensor, 110-degree
oltage have live voltage on them from the White/Red Fan medium view, 24 VAC/VDC, form C contacts 14 AW thermostat.
Line v SE200-001 Plunger style door switch White/Orange Fan high SE200-002 Magnetic door/window switch, N.C.-SPST Brown Outside air ST-R24S Changeover temperature sensor 1253 damper ST-S24E Remote room temperature sensor 1171 Black,14 AWG L1 T - Type 24 thermistor sensor
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1375 THERMOSTATS & CONTROLLERS PECO LINE AND LOW VOLTAGE TWO-POSITION AND PROPORTIONAL THERMOSTATS T155 AND T167 SERIES
DESCRIPTION The T155 Series is a general-purpose, electronic, two- position line-voltage and low-voltage thermostat . The T167 Series is a 0 to 10 VDC proportional heating/cooling low voltage thermostat . Both are designed for a variety of two- and four-pipe, heating, and cooling applications . Both manual and automatic changeover models include a provision for a remote thermistor temperature sensor . NEW! FEATURES • Electronic design performance • Two-position and Proportional models • Remote sensor capability • Fan and system switching models • °F scale standard • °C or warmer/cooler dials available • Setpoint stops available DIMENSIONS TB155-048 TA167-007 Two-position Proportional in 1.0 (cm) Two Mounting Slots (2.54) 0.16 x 0.36 (0.41 x 0.91)
2.75 0.5 (1.27) (6.99)
Opening for Wiring SEQUENCE GRAPHS
0.34 (0.86) 2.1 (5.33) Setpoint Heat Heat 3.3 (8.38) On Off 4.5 (11.43) Temp Inc Heating { Temp Dec SPECIFICATIONS 1°F 1°F Temp Dec T155 Cooling { Supply Voltage 24-277 VAC Temp Inc 25 mA @ 24 VAC Cool Cool Supply Current Off On Output Capacity 10 VA @ 24 VAC Manual switchover 20 VA @ 120-277 VAC TA155-047 Control Type Two position Setpoint Differential 1°F (0 .5°C) Heat Cool Deadband 4°F (2 .2°C) (TB155 only) Off On Temp Inc T167 1°F 2°F 1°F Supply Voltage 24 VAC Temp Dec Supply Current 25 mA Control Type Proportional
THERMOSTATS & CONTROLLERS Proportional Band 2°F (1°C) Heat Cool On Control Output 0-10 VDC, 1 kΩ min Off Deadband 4°F Deadband 0-10V actuator 0°F (possible H and C output ON) Auto switchover 21 2-10V actuator 0 .8°F (0 .44°C) TB155-048 10 VDC General 9 Setpoint Fan/System Switch Rating 8 24 VA @ 24 VAC 7 125 VA @ 120-277 VAC 6 Setpoint 50° to 90°F (10° to 32°C) 5 Operating Temperature 32° to 130°F (0° to 55°C) 4 Heating Cooling Construction Flame-retardant PVC 3 TB3-1 TB3-2 Color Cool gray 2 1 Weight 0 .28 lb (0 .13 kg) 0 VDC 0°F -3° -2° -1° 0.8°F 1° 2° 3° Approvals UL Listed File #E50023, CE °F Temperature Increase Warranty 5 years TA167
1376 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS PECO LINE AND LOW VOLTAGE TWO-POSITION AND PROPORTIONAL THERMOSTATS T155 AND T167 SERIES
T155 WIRING T167 WIRING
All connections potentially High voltage CONNECTIONS (Low voltage) CONNECTIONS (High voltage) CONNECTIONS CONNECTIONS TB1 TB3 TB2 4 24 VAC, Hot TB2 1 High 1 Heat TB3 1 Stat & VLV L1 (Hot) 3 24 VAC, Common 2 Cool 2 High 2 Remote Probe 2 Med 3 System Switched Output 3 Med 1 Remote Probe 3 Low 4 Low 4 L1 CONNECTIONS TB1 TB1 5 Fan L1 (Hot) CONNECTIONS (Low voltage) 4 L2 or Neutral TB2 TB3 (System and Fan) 2 Cool * Remove JP1 3 No Connection * Remove JP1 1 Heat for remote 2 Remote Sensor JP1* for remote sensor 1 Remote Sensor sensor JP1* T155 Terminal Identification T167 Terminal Identification NEW** Stat L1 voltage present on wiring ! HTG 1 VLV 24 VAC CLG **Remote 2 TB1 VLV 3 N.C. valves 0-10 VDC *sensor 4 CLG N.C. valves Shown TB3 3 sys. VLV *Remote HTG sensor 2 0-10 VDC VLV off L2 or 1 TB2 System switch not off^ Neutral TB1 25' 1 Stat and Valve L1 (24-277 VAC) 25' (7.6m) 4 2 TB2 3 Hi (7.6m) max JP1 3 Med Fan L2 1 2 * 4 max Hi 1 5 Low Fan L1 TB3 2 Med Fan L2 (24-277 VAC) 3 * Remove JP1 C 2 JP1 Low for remote ^Connect TB3-3 to TB2-5 for fan on during system on H 1 * 4 Fan L1 (24-277 VAC) sensor * Remove JP1 T155 for remote TA167-007, H or C sensor ** Stat L1 voltage present on wiring 680-243-6 TA167-006 w/o TB2, H and C Changeover stat **Remote (pipe mount) 680-243-6 sensor Changeover stat Htg 1 Htg/Clg 24 VAC 0-10 VDC (C) Clg 2 Vlv TB1 HTG/CLG 3 0-10 VDC (H) 4 VLV TB3 25' Shown *Remote 3 (7.6m) sys. N.C. valve sensor 2 max off 1 TB2 System switch not off^ N.C. valve TB1 1 Stat and Valve L1(24-277 VAC) 4 25' 2 Hi THERMOSTATS & CONTROLLERS 3 (7.6m) JP1 3 Med L2 2 * 4 max 1 5 Low Fan L1 TB3
Remove JP1 C 2 JP1* * Remove JP1 L2 or Neutral * H 1 for remote ^Connect TB3-3 to TB2-5 for fan on during system on for remote sensor sensor TB155 (changeover) TA167-006 (changeover)
ORDERING INFORMATION PART NUMBER CONTROL OUTPUTS USER CONTROL OPTIONAL SENSORS COVERS NEW OLD KELE ON/OFF PROPORTIONAL FAN ^ SYSTEM MODE ^ TWO PIPE MODEL MODEL TRIAC 0-10 VDC SWITCHING SWITCHING CHANGEOVER TA155-047^ All TA155-043 1H or 1C -- H/M/L* Htg/Off/Clg** None, manual only horz. & vert. TB155-048^ All TB155-047 1H and 1C -- H/M/L* On/Off** Ye s, requires C/O^^ stat horz. & vert. TA167-006^ -- -- 1H and 1C None None Ye s, requires C/O^^ stat vertical TA167-007^ -- -- 1H or 1C H/M/L* Htg/Off/Clg** None, manual only vertical ^ Changing the cover on T155 and T167 thermostats may eliminate the fan and system switching (See accessories C155-_ _). (New models only) ^^ Must use a changeover thermostat such as the 680-243-6. * H/M/L = High/Medium/Low, 24-277 VAC fan contacts, Off is wired through the system switch and shuts down the thermostat. ** Fan is off when system switch is Off, 24-277 VAC fan control. Note: All Tr iac outputs are 24-277 VAC with voltage potential in an open circuit.
RELATED PRODUCTS PAGE 65170 Warmer/cooler setpoint dial 65345 Thermostat base plate, 4.75" x 4.75" 21 65410 10°-34°C setpoint dial 65860 Setpoint range stop tabs, 2°F increments 680-243-6 Changeover thermostat with conduit fitting 68671 Remote sensor for T155 CA155 Thermostat cover for TA155-047, without fan or system switch, vertical only CA155-HOC Thermostat cover for TA155-047, with system H/O/C switch and no fan switch, vertical only CA167 Thermostat cover for TA167, without fan or system switch CA167-HOC Thermostat cover for TA167-007, with system H/O/C switch and no fan switch CB155 Thermostat cover for TB155-048, without fan or system switch, vertical only CB155-SNF Thermostat cover for TB155-048, with system On/Off switch and no fan switch, vertical only KTR24 Remote room thermistor sensor 1169 ST-U24 10K Ω Universal sensor with box 1228
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1377 THERMOSTATS & CONTROLLERS BULB THERMOSTATS A19, A28, A319, A419 SERIES
DESCRIPTION The A19 Series is a single stage, heating or cooling, SPDT temperature control that uses a liquid-filled sensing element and capillary . The unit has an exposed or concealed set point dial with adjustable differential, and it will switch line voltages . The A28 Series is a two stage, heating or cooling, w/2-SPDT temperature control that uses a liquid-filled sensing element and capillary . The unit has an exposed or concealed set point NEW! dial with adjustable differential, and it will switch line voltages . A319 A19DAC-1 (with The A319 Series is a single stage, heating or cooling, SPDT convertible knob) temperature control that uses a Type 21 thermistor sensor . The unit uses a set point dial and operates on 120 VAC or 240 VAC with a wide adjustable differential . A separate LED indicates relay operation .The A419 Series is a single stage, heating or cooling, SPDT temperature control that uses a A19BAC-1 PTC sensor . This unit features a digital display and buttons (with convertible to adjust the set point differential, setback temperature, anti- concealed plug) short cycle delay, and failsafe control . The unit operates on A19ABC-24 120 or 240 VAC and a 3/8" (0 .95 cm) display with H/C, °F /°C and setback indication . A separate LED indicates relay operation . A419
SPECIFICATIONS A19/A28 A319 A419 Voltage None required 120/208/240 VAC 50/60 Hz Power None required 1.8 VA 1.8 VA Setpoint Adjust Screwdriver slot or knob (concealed available) Dial Buttons and 3/8" display Sensor Liquid-filled bulb and capillary Thermistor PTC Ambient Temp Typical 140°F (60°C), strap-on 290°F (143°C) -30° to 140°F (-34° to 60°C) Differential x2, x3, x4 multiplier from min differential 1° to 30°F (0.5° to 17°C) Dimensions 4.5"H x 2.2"W x 2.0"D (11.43 x 5.59 x 5.08 cm) 5.0"H x 2.4"W x 2.4"D (12.70 x 6.10 x 6.10 cm) Approvals UL Listed File #E6688, CSA UL Listed File #E27734, CSA Weight 1.2 lb (0.55 kg) 1.75 lb (0.75 kg) Warranty 1 year 1 year 1 year
WIRING
2 Y FUNCTION JUMPER SETTING JUMPER LABEL POSITION * heat Cooling/ P4-Heat Cooling* Removed Differential Potentiometer Heating Heating Installed 3 B Setpoint P4-Cut-out Cut-in* Removed THERMOSTATS & CONTROLLERS Cut-out Installed Keypad Lock P5-Unlock Locked Removed 1 R Unlocked* Installed *Factory settings 21 Action on increase of temperature Keypad Heat/Cool Unlock Cut In/Out Setpoint shaft P5 P4 Cutout with slot for knob (+) BIN C Relay Energized (–) COM 240 120 NC or concealed NO (+) SEN adjust COM LED Indicator with plug screw (All other settings are 1/2" Knockout through the keyboard) Differential AC
3 Y X4 adjustment C
X3 Jumper Block 240 120 NC multiplier NO 2 B X2 Probe Position COM Min (if min, diff = 3) included 1/2" Knockout 1 R (if X2, diff = 6) Heating Cooling Probe included A28 has two sets of contacts A319 A419 1378 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS BULB THERMOSTATS A19, A28, A319, A419 SERIES
ORDERING INFORMATION
SINGLE-STAGE SPACE AND REMOTE BULB THERMOSTAT Model Switch Range Diff °F (°C) Bulb and Bulb Range Electrical Ranges Action °F (°C) Adjustable Capillary Well # * Adjuster Motor Ratings VAC 120 208 240 30 to 110 3.5 fixed 1.4" x 2.25" Space A19BAC-1C SPDT Convertible AC full load amp 16.0 9.2 8.0 (-1 to 43) (1.9) coil Thermostat
1 -30 to 100 3 to 12 3/8" x 4" Screwdriver *A19ABA-40 SPST WEL14A-602R AC locked rotor amp 96.0 55.2 48.0 (-34 to 38) (1.7 to 6.7) 6' cap slot 50 to 130 3.5 to 14 3/8" x 5" A19ABC-4C SPDT (10 to 55) (1.9 to 8.0) 8' cap WEL14A-603R Knob Noninductive or -30 to 100 3 to 12 3/8" x 4" 22A SPDT WEL14A-602R Convertible resistance load amp A19ABC-24 (-34 to 38) (1.7 to 6.7) 8' cap 120-277 VAC NEW! (not lamp loads) -30 to 100 3 to 12 A19ABC-36 SPDT 3/8" x 4" WEL14A-602R Convertible (-34 to 38) (1.7 to 6.7) 20' cap *A19ABA-40 contacts open on temperature decrease. MANUAL RESET - REMOTE LIQUID BULB THERMOSTAT Model Switch Range Diff °F (°C) Bulb and Bulb Range Electrical Ranges Action °F (°C) Adjustable Capillary Well # * Adjuster Motor Ratings VAC 120 208 240 SPST Manual AC full load amp 16.0 9.2 8.0 A19ACA-14 -30 to 100 3/8" x 4" WEL14A-602R Screwdriver Open (-34 to 38) reset 6' cap slot AC locked rotor amp 96.0 55.2 48.0 Low
SPST Manual AC full load amp 10.0 — 6.0 A19ADB-1C 100 to 240 3/8" x 3.5" WEL14A-602R Knob Open (38 to 116) reset 6' cap High AC locked rotor amp 60.0 — 36.0 CHANGEOVER STRAP-ON LIQUID BULB THERMOSTAT (AQUASTAT) Model Switch Range Diff °F (°C) Range Electrical Ranges Mounting to Coil Action °F (°C) Fixed Adjuster Motor Ratings VAC 120 240 10 AC full load amp 10.0 6.0 A19DAC-1 SPDT 100 to 240 Direct clamp-on strap Knob (38 to 116) (5.6) AC locked rotor amp 60.0 36.0
Note: A19DAC-1 not for use as a limit control Pilot duty - 125 VA, 24-600 VAC THERMOSTATS & CONTROLLERS TWO-STAGE SPACE AND REMOTE BULB THERMOSTAT Model Switch Range Diff °F (°C) Bulb and Bulb Range Electrical Ranges Action °F (°C) Adjustable Capillary Well # * Adjuster Motor Ratings VAC 120 208 240 30 to 110 Space A28AA-4C 2-SPDT 3.5 (1.9) 1.4" x 2.25" Convertible AC full load amp 16.0 9.2 8.0 (-1 to 43) 3 interstage 2' coil Thermostat -30 to 100 5 (2.8) 3/8" x 4" A28AA-29C 2-SPDT 2 to 7 adj WEL14A-602R Convertible AC locked rotor amp 96.0 55.2 48.0 (-34 to 38) interstage 8' cap Noninductive or 40 to 120 5 (2.8) 3/8" x 4" NEMA 3R 22A A28MA-2C Screwdriver resistance load amp 2-SPDT (4 to 49) 8 interstage 6' cap 120-277 VAC WEL14A603R slot (not lamp loads) Noninductive or 20 to 80 1.5 (0.8) A28AJ18C 2-SPDT 2 to 7 adj 3/8" x 5" WEL14A-603R Convertible resistance load amp 10.0 9.2 8.0 (-7 to 28) interstage 10' cap (not lamp loads)
SOLID STATE SENSOR THERMOSTAT
Model Switch Range Diff °F (°C) Range Electrical Ranges Bulb and Capillary Action °F (°C) Adjustable Adjuster Motor Ratings VAC 120 208 240 1 to 30 AC full load amp 16.0 9.2 8.0 -20 to 100 Type 21 thermistor included Knob A319ABC24-1 SPST (0.5 to 17.0) (-30 to 38) 8' (2.4 m) Lead AC locked rotor amp 96.0 55.0 48.0 1 to 30 A319ABC12-1 SPST 100 to 220 Type 21 thermistor included Knob Noninductive 15.0 10.0 10.0 (38 to 105) (0.5 to 17.0) 8' (2.4 m) Lead 21 PTC sensor included Buttons A419ABC-1C SPDT -30 to 212 1 to 30 1.0 1.0 0.5 (-34 to 100) (1.0 to 30.0) 6.6' (2m) Lead with digital Horsepower 0.25 diameter display * Bulb well not supplied
ACCESSORIES PAGE PLT344-1R DIN rail end clips SHL10A-603R Sun shield for A99 sensor for outdoor sunny locations TE-6001-1 Holder for duct sensor 1391 TE-6001-2 Holder for OSA sensor 1391 WEL14A-602R 4-15/16 COPPER BULB WELL WEL14A-603R 5-13/16 COPPER BULB WELL
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1379 THERMOSTATS & CONTROLLERS JOHNSON CONTROLS LOW TEMPERATURE LIMIT CONTROL A11 SERIES
DESCRIPTION The A11 Series Low-Temperature Limit Controls incorporate a 20' (6 m), vapor-charged sensing element . The A11 Series reacts to the coldest 16" (40 .6 cm) section of the control's sensing element . It is suitable for monitoring the trailing face of a coil for freeze protection .
FEATURES NEW! • Snap-acting contacts • External temperature scale • Easy set point adjustment • Unaffected by ambient temperature at the control and 4' (1.2m) capillary
APPLICATION A11A-1 • Low temperature limit for coils and/or liquid pipes
SPECIFICATIONS Sensing Element 20' (6 m) of 1/8" copper tube Sensor R-134A vapor filled Capillary 4' (1 .2 m) Operating Temperature 0° to 140°F (-18° to 60°C) Switch SPST, N .C . Element 250°F (121°C) maximum Action N .C . opens on decrease in temp Dimensions 3"H x 5 .4"W x 2 .4"D Switch Rating 16A @ 120 VAC, 9 2A. @ 208 VAC, (7 .6 x 13 .7 x 6 cm) 8A @ 240 VAC Weight 1 75. lb (0 .79 kg) Pilot Duty 125 VA @ 24-277 VAC Approvals UL listed, File#SA516; CSA certified, Range (Cut Out) 35° to 45°F (2° to 7°C) File#LR948 Setpoint Adjust Slot screwdriver Warranty 1 year Differential A11A 12°F (6 7°C). manual reset A11B 12°F (6 7°C). auto reset
WIRING INSTALLATION
2 Top of Duct A11 Series
SPST - Normally closed 1 THERMOSTATS & CONTROLLERS opens on decrease Mount sensing element horizontally for proper measurement. in temperature Typically mounted downstream of a coil with capillary A11 Series exposed to all areas likely to encounter low temperatures 21 ORDERING INFORMATION
MODEL DESCRIPTION A11A-1 Manual reset low-temperature limit control A11B-1 Auto reset low-temperature limit control
RELATED PRODUCTS PAGE CC-1G-K Plastic capillary and sensor holder mounting clip 1391 ES1051 Freeze spray, 8 fl oz 1390 M-648K Copper-clad capillary mounting clip 1391 N March 2014 1380 888-397-5353CO USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. TS & N TA CO TS & TA HERMOS HERMOS THERMOSTATS & CONTROLLERS LOW & HIGH TEMPERATURE LIMIT CONTROLS A70 SERIES
DESCRIPTION The A70 Series heavy-duty temperature-limit controls incorporate a vapor charged sensing element . A70G, A70H, and A70K have a four-wire, two-circuit contact block that contains two isolated sets of contacts . The contacts are designed to transfer at set point so that when the main contact opens, the auxiliary contact closes simultaneously . Typical applications include shutdown of a ventilation system and BAS alarm indication upon low or high temperature .
NEWFEATURES ! • Automatic or manual reset models • Long-life, snap-acting contacts • Easy set point adjust A70HA-1 • M-648-KOne-year warranty Capillary Supports (orderSPECIFICATIONS separately) Mount sensor horizontally for proper measurement .Typically mounted downstreamSWITCH of a coil with capillary exposed to all MAX ELECTRICAL RATING TEMP areas likely to encounterACTION low or high temperatures as requiredBULB/ . BULB MODEL RANGE RESET RANGE MOTOR LINE-M2 (Main) LINE-M1 (Auxiliary) (Main contacts) CAPILLARY TEMP °F (°C) °F (°C) ADJUSTER RATINGS LINE-M2 °F (°C) (VAC) 120 208 240 277 120 208 240 277 20' of 1/8" A70GA-1* Open Low 15 to 55* Auto (6m of 0.32 cm) 400 Screwdriver AC Full Load 16.0 9.2 8.0 – 6.0 3.3 3.0 – Low Limit (-10 to 13) 5 (2.8) OD tubing (260) Slot Amp 20' of 1/8" A70HA-1* Open Low 15 to 55* Manual 400 Screwdriver AC Non- 16.0 9.2 8.0 7.2 6.0 6.0 6.0 6.0 Low Limit (-10 to 13) Reset (6m of 0.32 cm) (260) Slot Inductive Amp OD tubing 3/8" x 3"
A70HA-2 35 to 80 Manual 250 Screwdriver Pilot Duty 125 VA, 24-600 VAC THERMOSTATS & CONTROLLERS Open Low (0.95 x 7.6 cm) 57.5 VA, 120-300 VDC Low Limit (1.7 to 27) Reset 6' (1.9m)cap (121) Slot 3/8" x 10" A70KA-1 100 to 170 Manual 240 Screwdriver Approvals UL Listed File #SA516 Open High (38 to 77) Reset (0.95 x 25.4 cm) (116) Slot High Limit 6' (1.9m) cap *The low cut-out stop is set and sealed at 35°F (1.6°C). The control responds to the lowest temperature along any 1' (30.5 cm) section of the 20' (6m) element.
WIRING INSTALLATION
Line Line
Control Auxiliary Circuit Contacts M-648-K Capillary Supports M2 M1 (order separately)
A70 Series Mount sensor horizontally for proper measurement .Typically Low Limit - Action on temperature decrease mounted downstream of a coil with capillary exposed to all High Limit - Action on temperature increase areas likely to encounter low or high temperatures as required . 21 ORDERING INFORMATION MODEL DESCRIPTION A70GA-1 Low-limit temperature control, automatic reset, 20' (6m) element A70HA-1 Low-limit temperature control, manual reset, 20' (6m) element A70HA-2 Low-limit temperature control, manual reset, 3" (7.6 cm) element, 6' (1.9m) capillary A70KA-1 High-limit temperature control, manual reset, 10" (25.4 cm) element, 6' (1.9m) capillary
RELATED PRODUCTS PAGE Max Bulb CC-1G-K Temp Plastic capillary and sensor holder mounting clip 1391 ES1051 ˚F (˚C) Freeze spray, 8 fl oz 1390 M-648-K Copper-clad capillary mounting clip 1391
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA Line Line 1381
Control Auxiliary Circuit Contacts
M2 M1 A70 Series Low Limit - Action on temperature decrease High Limit - Action on temperature increase
Max Bulb Temp ˚F (˚C) THERMOSTATS & CONTROLLERS LOW LIMIT TEMPERATURE CONTROLLERS L480 SERIES
DESCRIPTION The L480 Series low limit controllers operate electric dampers, valves and compressor or fan motors to provide temperature or limit control of air conditioning systems and refrigeration units . The L480B has an SPDT switch and automatically resets; the L480G has an SPST switch that opens on a fall in temperature and requires manual reset . The L482A has two SPST switches and manual reset; the NEW! main switch opens, and the auxiliary switch closes, on a fall in temperature .
FEATURES L482A1004 L480B1239 • Dual temperature scale plate provides both Fahrenheit and Celsius readings • No sensing bulb, the controller operates at the coldest point (1 foot section) of the 20 ft. element for complete APPLICATION coverage • Dustproof and moisture proof enclosed switch for • Air handling unit coil freeze protection trouble-free operation • Freezer cabinets • Horizontal or vertical mounting for installation • Display cases flexibility • Beverage coolers • Frost alarm for storehouses, orchards
SPECIFICATIONS Sensing Element 20' (6m) element, 1/8" dia ,. no bulb, Operating Temperature controller operates at coldest point L480B, G -20° to 125°F (-11° to 52°C) Switch action L482A 20° to 140°F (-7° to 60°C) L480B SPDT, automatic reset, makes R-B, Maximum Element Temperature breaks R-W on temperature fall L480B, G 225°F (107°C) L480G SPST, manual reset, breaks circuit L482A 250°F (121°C) on temperature fall Dimensions L482A 2 SPST, manual reset, main switch L480B, G 3 3"H. x 3 .7"W x 2 .3"D (M2) opens, aux . switch (M1) closes (8 .4 x 9 .4 x 5 .9 cm) on temperature fall L482A 4 7"H. x 3 .9"W x 2 .1"D Switch Ratings See Table 1 and Table 2 (11 .9 x 10 1. x 5 3. cm) Conduit Connection 7/8" (22mm) hole for 1/2" conduit Weight
THERMOSTATS & CONTROLLERS with 1-3/32" (28mm) knockout ring for L480B 1 5. lb (0 .68 kg) 3/4" conduit L480G 1 6. lb (0 .73 kg) Setpoint Range L482A 2 3. lb (1 .04 kg) L480B, G 20° to 60°F (-5° to 15°C) Approvals UL Listed File #E49725, Vol . No . 2, 21 L482A 15° to 55°F (-9 .4° to 13°C), with dated 02-09-66; Guide No . SDFY2 setpoint stops minimum 34°F CSA Certified Listing G, File No . Setpoint Adjustment Slotted screwdriver LR1620; Guide No . 400-E-0 Differential Warranty 1 year L480B, G Non-adjustable, additive, fixed at 10°F (6°C) L482A Non-adjustable, additive, fixed at 5°F (3°C)
1382 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS LOW LIMIT TEMPERATURE CONTROLLERS L480 SERIES
WIRING
L1 (HOT) R LINE 2 LINE 1
L1 (HOT) L2 Alarm B M2 M1 L2 Load Load W L1 NEW! (HOT) L2 Load
TO BAS INPUT OR ALARM DEVISE L480B L480G L482A
TABLE 1: AMPERE RATINGS L480B, G 120 VAC 240 VAC
Full Load 10 .2 6 5.
Locked Rotor 61 .2 39 .0 DC Rating: 0 .2A @ 120 VDC, 0 .1 A @ 240 VDC Pilot Duty: 125 VA THERMOSTATS & CONTROLLERS TABLE 2: AMPERE RATINGS L482A 120 VAC 208 VAC 240 VAC 277 VAC Switch M2 (Main) Full Load 16.0 9.2 8.0 - Locked Rotor 96.0 55.2 48.0 - Non-inductive 16.0 9.2 8.0 7.2 Switch M1 (Auxillary) Full Load 6.0 3.3 3.0 - Locked Rotor 36.0 19.8 18.0 - Non-inductive 6.0 6.0 6.0 6.0 Pilot Duty (both poles): 125 VA @ 24 to 600 VAC; 57.5 VA @ 120 to 300 VDC
ORDERING INFORMATION 21 MODEL DESCRIPTION L480B1239 Auto reset, SPDT, 20 ft L480G1044 Manual reset, SPST, 20 ft L482A1004 Manual reset, 2 SPST, 20 ft
RELATED PRODUCTS PAGE CC-1G-K Plastic capillary and sensor holder mounting clip 1391 ES1051 Freeze spray, 8 fl oz 1390 M-648-K Copper-clad capillary mounting clip 1391
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1383 THERMOSTATS & CONTROLLERS LOW-LIMIT TEMPERATURE CONTROL TSA, TF142
DESCRIPTION Models TSA and TF142 provide low-limit temperature control in operating dampers, valves, compressors, or fan motors in HVAC systems . Manual and automatic reset models are available with SPDT or DPDT switching action . Models TSA and TF142 respond to the lowest temperature sensed along any 1' (0 .3m) section of the capillary element . FEATURES NEW! • SPDT and DPDT models • Manual and automatic reset models • Easy set point adjustment • Manual test lever TF142 • One year warranty TSA SPECIFICATIONS Model TSA-DOP TSA-COP TF142-SODP20/SODP06 TF142-SOAP20/SOAP06 Reset Manual Automatic Manual Automatic Setpoint Range 35° to 68°F (2° to 20°C) 34° to 70°F (1° to 21°C) Differential 4.5°F (2.5°C) fixed 4.5°F (2.5°C) fixed Switch Type SPDT, snap acting DPDT, snap acting Inductive 24 FLA, 144 LRA @ 120-240 VAC 2 hp @ 120 Inductive 14 FLA, 84 LRA @ 120 VAC; 12 FLA, 72 LRA @ 240 VAC 3/4 Contact Rating VAC; 3 hp @ 240 VAC Pilot duty 720 VA max @ 120-600 hp @ 120 VAC; 2 hp @ 240 VAC Pilot duty 720 VA max @ 120-600 VAC 144 VA max @ 24 VAC VAC 144 VA max @ 24 VAC Sensing Element Vapor-filled copper capillary, tin-plated 5/64” (0.2 cm) x 20’ (609.6 cm), or 6’ (182.9 cm)TF Models 3/32” (0.2cm) -60° to 160°F (-51° to 71°C) Sensing Element -60° to 160°F (-51° to 71°C) Sensing Element Operating Temperature 300°F (149°C) max 300°F (149°C) max Dimensions 2.94”H x 3.34”W x 1.56”D (7.47 x 8.48 x 3.56 cm) 3.63”H x 5.5”W x 2.63”D (9.21 x 13.97 x 6.67 cm) Weight 1 lb (0.45 kg) 2.8 lb (1.3 kg) Approvals UL and ULC listed, CE, File # E85974, E300881 Warranty 1 year M-648-K capillary mounting clip Accessories Mounting clips supplied with each control (order separately) WIRING INSTALLATION
22 2 4 24 12 14 Low Capillary Limit Duct Install capillary element in a horizontal serpentine pattern across the duct on the downstream side of the coil so it is 1 21 11 exposed to areas where low tempera- tures will occur. Do not kink or apply TSA TF142 excessive force to the capillary element.
THERMOSTATS & CONTROLLERS Switch action on Switch action on decrease in temperature decrease in temperature (Contact 1 to 4 Opens; (Contacts 11-14 and 21-24 Open; Contact 1 to 2 Closes) Contacts 11-12 and 21-22 Close)
ORDERING INFORMATION 21 MODEL DESCRIPTION TSA-DOP Low-limit temperature control, SPDT, manual reset TSA-COP Low-limit temperature control, SPDT, automatic reset TF142-SODP20 Low-limit temperature control, DPDT, manual reset TF142-SODP06 Low-limit temperature control, DPDT, manual reset, 6 ft cap TF142-SOAP20 Low-limit temperature control, DPDT, automatic reset TF142-SOAP06 Low-limit temperature control, DPDT, automatic reset, 6 ft cap
RELATED PRODUCTS PAGE CC-1G-K Plastic capillary and sensor holder mounting clip 1391 ES1051 Freeze spray, 8 fl oz 1390 M-648-K Copper-clad capillary mounting clip 1391
1384 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS DUCT HIGH TEMPERATURE LIMIT TC-105, TC-100
DESCRIPTION Models TC-105 and TC-100 feature a helix bimetal element that senses rapid increases in duct temperature, such as in a fire, and operate an SPST switch that opens with a rise in temperature . A manual reset button will reactivate the TC-105 and TC-100 after the high-temperature condition has cleared .
SPECIFICATIONS NEWContacts SPST N .C . mechanical! latching Electrical Capacity 9 .8 full load amps @ 115 VAC 4 .9 full load amps @ 230 VAC Element Length 5” (12 .7 cm) or 11” (27 9. cm) TC-105-1A-3C Manual Reset Button External access Setpoint Range 100° to 250°F (38° to 122°C) field FEATURES adjustable, factory set @125°F (51 .6°C) • Low-cost duct high-temperature limit control Differential 25°F (13 8°C). fixed • Adjustable set point • Manual reset Weight • UL listed TC100 1 lb (0 .48 kg) TC105 0 .75 lb (0 36. kg) Approvals UL listed, File #MH7076 Warranty 1 year THERMOSTATS & CONTROLLERS WIRING DIMENSIONS
in 1 .9 (4 .83) (cm) 0 .95 (2 .42) 0 .23 (0 .58) Mounting 250 hole 4 .0 (10 .16) Factory Set 200 @ 125 F ° 0 .75 (1 .91) 150 Duct cut-out 3 .16 hole (8 .03) 100 2 .19 (5 .56)
0 .42 N .C . Contact (1 .07) Screw Terminals 21 (opens on 0 .5 (1 .27) 0 .5 (1 .27) temp rise) Knockout Knockout 2 .75 (6 .99)
ORDERING INFORMATION
MODEL DESCRIPTION TC-100-1A-3C Duct high-temperature limit with 11" (27.9 cm) element and adjustable setpoint TC-105-1A-3C Duct high-temperature limit with 5" (12.7 cm) element and adjustable setpoint
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1385 THERMOSTATS & CONTROLLERS NEMA 4X INDUSTRIAL CONTROL THERMOSTATS TF115, TH109, AND TRF115 SERIES
DESCRIPTION Peco’s TF115-023, TH109-009, TRF115-005, and TRF115- 007 industrial control thermostats offer reliable control in industrial, agricultural, and commercial applications . The TH109-009 has 40-100°F range with a molded plastic enclosure and stainless steel hardware . The TF115-023 has a low mass, high surface area stainless steel coiled sensor which provides rapid temperature response . Both the NEW! TRF115-005 and TRF115-007 both have remote bulbs with capillary tubes . All of these thermostats come with SPDT switches and are NEMA 4X, UL listed, and are suitable for use under NEC article 547 .
FEATURES • Good for both heating and cooling • Rugged, weather resistant NEMA 4X enclosure TH109-009 TF115 • Tolerates moist conditions • One SPDT switch on T115 models • Two SPDT switches on TH109 models
RATINGS Voltage Rating FLA LR Non-Inductive Pilot Duty 120 VAC 16.0 VA 80.0 A 25.0 A 125 VA 208 VAC 13.2 VA 66.0 A 25.0 A 125 VA 240 VAC 12.0 VA 60.0 A 25.0 A 125 VA 277 VAC 10.0 VA 50.0 A 22.0 A 125 VA
TRF115-005
ORDERING INFORMATION AND SPECIFICATIONS Model Temperature Differential Switch Action Bulb Enclosure Warranty Dimensions Weight, Approvals Number Range Rating Standard TF115-001 40° to 110°F Fixed 3°F Single pole/Double Coiled Air- NEMA 4X 2 Years 3.1"W x 6.5"H x 2.5"D 2.1 lb UL, CSA (4° to 43°C) (-16°C) throw (SPDT) Stainless Steel (7.9 x 16.5 x 6.4 cm) (.49 kg) TF115-023 -30° to 100°F Fixed 6°F Single pole/Double Coiled Air- NEMA 4X 3 Years 3.1"W x 6.5"H x 2.5"D 2.1 lb UL, CSA (-34° to 38°C) (-14°C) throw (SPDT) Stainless Steel (7.9 x 16.5 x 6.4 cm) (0.49 kg)
THERMOSTATS & CONTROLLERS TRF115-005 0° to 120°F Fixed 3°F Single pole/Double 5 foot Stainless NEMA 4X 4 Years 3.1"W x 6.5"H x 2.5"D 2.1 lb UL, CSA (-17° to 49°C) (-16°C) throw (SPDT) Remote (7.9 x 16.5 x 6.4 cm) (0.49 kg) TRF115-007 -30° to 100°F Fixed 6°F Single pole/Double 8 foot Copper NEMA 4X 5 Years 3.1"W x 6.5"H x 2.5"D 2.1 lb UL, CSA (-34° to 38°C) (-14°C) throw (SPDT) Remote (7.9 x 16.5 x 6.4 cm) (0.49 kg) 21 TH109-009 40° to 100°F 3°F (-16°C)/ 2-Single pole/Double Coiled Air- NEMA 4X 6 Years 3.5"W x 7.3"H x 4.9"D 2.1 lb UL, CSA (4° to 38°C) Stage throw (SPDT) Stainless Steel (8.9 x 18.5 x 12.4 cm) (0.49 kg)
1386 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS NEMA 4X INDUSTRIAL CONTROL THERMOSTATS TF115, TH109, AND TRF115 SERIES
WIRING
Wiring Connections Two Speed Cooling L1 CAN BE TIED TO A LOUVER OR CURTAIN CONTROL BROWN
TF115-001 BLACK
TF115-023 TEMP RISE TRF115-005 L2 OR NEUTRAL VIOLET TRF115-007 PINK NEW! HIGH COOL RED BLUE LOW COOL
TH109-009 Two Speed Heating L1 Double pole, double throw contacts BROWN BLACK
operate sequentially L2 OR NEUTRAL TEMP RISE with 3°F (1.7°C) nominal separation on temperature rise or fall. VIOLET RED
BLUE LOW HEAT
PINK HIGH HEAT
Two Stage Cooling Two Stage Heating Auto Changeover Control
L1 L1 1 Heat/1 Cool with 3°F dead band THERMOSTATS & CONTROLLERS L1 L1 L1 L1 BROWN BLACK BROWN BLACK BROWN BLACK L2 OR NEUTRAL L2 OR NEUTRAL TEMP RISE L2 OR NEUTRAL TEMP RISE TEMP RISE
VIOLET PINK PINK RED VIOLET PINK VIOLET BLUE BLUE RED RED
BLUE SECOND STAGE COOL FIRST STAGE HEAT COOLING LOAD
FIRST STAGE COOL SECOND STAGE HEAT HEATING LOAD
21
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1387 THERMOSTATS & CONTROLLERS NEMA 4X RATED THERMOSTATS T631F/G, TW155/255 SERIES
DESCRIPTION The T631F/G Series and the TW155/255 Series thermostats have NEMA 4X enclosure ratings and provide line voltage control of heating, cooling and ventilation systems in areas that are subject to washdown such as barns, poultry and hog houses, pump buildings and crop storage areas . NEWT631F TW155 ! SPECIFICATIONS Contact Rating (A) Dimensions in (cm) Range Differential °F 120 240 277 Model Setpoint Ouput 24 VAC TW155/255 6 .87"H x 3 .125"W x 3 .375"D °F (°C) (°C) VAC VAC VAC (Not including knob) 40 to 110 22 FLA 22 FLA 22 FLA (17 .4 x 7 .9 x 8 .6 cm) TW155 External FIXED 1 SPDT - (4 to 43) (3/4 HP) (1.5HP) (1.5HP) T631F/G 5"H x 6 .5"W x 3"D 40 to 110 22 FLA 22 FLA 22 FLA (12 .7 x 16 .5 x 7 .6 cm) TW255 External FIXED DPDT - (4 to 43) (3/4 HP) (1.5 HP) (1.5HP) Approvals TW155/255 ETL Canada/USA 35 to 100 FIXED 2 (1.1) 7.4 FLA 3.7 FLA 3 FLA T631F1068 Internal 1 SPDT 2 FLA T631F/G UL listed File No . E4436 Vol . 1 Sec (2 to 38) 44 LRA 22 LRA 18 LRA UL Guide XAPX; CSA Certified File 35 to 100 FIXED 2 (1.1) 7.4 FLA 3.7 FLA 3 FLA T631F1084 External 1 SPDT 2 FLA No . LR1620 Guide No . 400-E-O; (2 to 38) 44 LRA 22 LRA 18 LRA Meets NEC Article 547-4 35 to 100 FIXED 3.5 (1.9) 1 SPDT 16 FLA 8 FLA T631F1092 External - - Maximum Operating Temperature (2 to 38) (1 HP) 96 LRA 48 LRA TW155/255 110°F (43°C) 35 to 100 FIXED 2 (1.1) 2 SPDT 16 FLA 8 FLA T631F/G 145°F (63°C) T631G1059 External - - (2 to 38) Interstage 0 to 7 (0 to 4) (1 HP) 96 LRA 48 LRA
WIRING
T631F T631G Fan Switch
2 Cooling or RBW Ventilating R B Load W Add Jumper Wire Speed Change Power L1 R B W Supply (HOT) Switch Power Heating L2 Supply L1 1 (HOT) Equipment Heating System 1 L2 1 Provide Disconnect Means And Overload Provide Disconnect Means And Overload Protection As Required. 1 Protection As Required. 2 Switch Makes R To B On Temperature Fall. T631G Hookup For Heating And Cooling T631F Hookup For Heating Control (Or Ventilating) Control.
TW155 TW255 TW155 TW255 Heating Heating Cooling Cooling L1 L1 L2 L1 L1 L2 Black Black Black Black Black Black
L2 L2 Blue Blue Red Red
THERMOSTATS & CONTROLLERS Red Red Red Blue Blue Blue
Load Load Load Load Switch makes black to Switch makes black to Switch makes black to Switch makes black to 21 red on temperature fall. red on temperature fall. blue on temperature rise. blue on temperature rise.
ORDERING INFORMATION
MODEL DESCRIPTION TW155 SPDT, NEMA 4 Thermostat, external setpoint, 120 to 277 VAC rating TW255 DPDT, NEMA 4 Thermostat, external setpoint, 120 to 277 VAC rating T631F1068 SPDT, NEMA 4 Thermostat, internal setpoint, 24 to 240 VAC rating T631F1084 SPDT, NEMA 4 Thermostat, external setpoint, 24 to 240 VAC rating T631F1092 SPDT, NEMA 4 Thermostat, external setpoint, 120 to 240 VAC rating T631G1059 SPDT (2), NEMA 4 Thermostat, external setpoint, 120 to 240 VAC rating
1388 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS TWO POSITION ROOM THERMOSTATS TC-1100 SERIES
DESCRIPTION The TC-1100 Series two-position, single-pole double-throw room thermostat is for single-stage heating or single-stage cooling . The TC-1100 Series comes in three setpoint spans to cover most any application: 55° to 85°F, 45° to 75°F, and 75° to 105°F . The TC-1100 Series comes standard with thermometer and set point as shown . It is also packaged with cover plates for set point only or for blank cover .
NEWFEATURES ! • High and low voltage • Thumbwheel set point • UL listing • Plates with set point or blank cover • Fits standard single-gang switch box TC-1101
SPECIFICATIONS Supply Voltage 24-240 VAC Differential 2°F (1°C) Contacts Connections 6 0". (15 .24 cm) leads, 14 AWG Cooling SPDT 3 .0A @ 24/120V, Mounting Vertical, 2" x 4" (5 .1 x 10 .2 cm) 1 .5A @ 240V switch box Heating SPDT 4 .4A @ 24/120V, Dimensions 4 38"H. x 2 .86"W x 1 .63"D 2 .2A @ 240V (11 .13 x 7 26. x 4 .14 cm) THERMOSTATS & CONTROLLERS Pilot Duty 40 VA @ 24V, 210 VA @ 120/240V Weight 0 8. lb (0 .36 kg) Control Type Two-position, on/off Approvals UL File #XAPX .E9429 Sensor Bimetal snap acting Warranty 2 years Range Limits Dial stop pins
WIRING Orange-Brown makes on temperature drop Red Brown
Temp L1 Drop Orange 21 TC-1100 Series
ORDERING INFORMATION
MODEL DESCRIPTION TC-1101 Two-position SPDT H/C thermostat, setpoint 55° to 85°F TC-1102 Two-position SPDT H/C thermostat, setpoint 45° to 75°F TC-1103 Two-position SPDT H/C thermostat, setpoint 75° to 105°F TC-1101-116 Two-position SPDT H/C thermostat, setpoint 13° to 29°C
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1389 THERMOSTATS & CONTROLLERS THERMOSTAT TOOLS AND CHANGE-OVER THERMOSTAT ZS002, KT-1, JC5309, ES-1051, 680243-6
DESCRIPTION Model ZS002 is a handheld thermostat substitution tool and an air conditioning system testing tool for up to two stages of heating and cooling in conventional or heat pump systems . SPECIFICATIONS Supply Voltage 24 VAC from the air conditioning system Connections Eight 30" leads, 18 AWG, with alligator clips Red R - Power NEW! Blue C - Common White W1 – Heat 1 Gray W2 – Heat 2 Yellow Y1 – Cool 1 Violet Y2 – Cool 2 Orange O/B – Heat pump reversing valve ZS002 Green G – Fan control Enclosure 5" x 8" plastic with hook (for hanging) and magnetic holding strip Mode Three modes, continuity/analyze/activate ORDERING INFORMATION LED Indication 19 LEDs, Power/Mode/Control Switching Capability Six 2-position controls and one 3-position MODEL DESCRIPTION mode switch ZS002 Air conditioning system testing tool
DESCRIPTION Thermostat Screwdrivers allow removal of sensor and thermostat covers for service . ORDERING INFORMATION
MODEL DESCRIPTION KT1 Mounting screwdriver 1/16" allen key JC-5309 Flexible 1/16" Allen key pocket screwdriver KT-1 JC5309
DESCRIPTION Freeze Spray is for testing sensors and thermostats . Cool down the elements to test thermostat operation or point-to- point wiring verification . This non-corrosive and contaminant- free aerosol has no CFCs and saves checkout time .
Ingredients: Chemical Name CAS# Wt .% Range Tetrafluoroethane 811-97-2 94 .0-99 .0% Methanol 67-56-1 0 .1-1 .5 ORDERING INFORMATION
THERMOSTATS & CONTROLLERS MODEL DESCRIPTION ES1051 Freeze spray, 8 fl oz ES-1051
DESCRIPTION 21 Model 680243-6 changeover switch is snap-acting SPDT and made to strap onto water pipes . It is used for heating/cooling changeover inputs to room thermostats . It has a fixed setpoint of 85°F and a 20°F lowside differential (off at 65°F) . The maximum fluid temperature is 220°F and maximum ambient is 125°F .
ORDERING INFORMATION Circuit Made Switch Makes MODEL DESCRIPTION 680243-6 Pipe-mounted thermostat change-over switch with White- Blue (Cold) Below 60°F conduit fitting 680243-6 White-Black (Hot) Above 88°F 1390 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014 THERMOSTATS & CONTROLLERS THERMOSTAT REMOTE SENSOR ACCESSORIES 356-90K, APB-28, CC-1G, M645K, M-2500, PN-46, TE6001
DESCRIPTION DESCRIPTION Models TE6001, CG-1G, M645K, 356-90K, M-2500, APB-28, Wall adaptor plates (goof plates) offer concealment of and PN-46 are all sensor mounting brackets for averaging, plaster irregularities, and are ideal to cover up old thermostat duct, and outside air probe applications . They have a 1/4" mounting holes or paint ridges . Foam backing pads offer clip or guide to firmly hold a temperature sensor for the wall insulation for better temperature readings . Switch plate application . displays offer readouts for temperature at every light switch .
TE6001-1 Duct temperature element holder with box 10-531 White adapter plate 7" x 5 .25" (KTR, KHR) NEW! Hole Dimensions: 2" x 1 .5"
TE6001-8 Duct temperature element holder without box 50002883-001 White wall plate 6" x 8 .3" (TH5000, TH6000) Hole Dimensions: 2 25". x 2"
M-648K Copper-clad capillary and sensor holder mounting clip 65345 White wall plate 4" x 4" (PECO) Hole Diameter: 1 .5" THERMOSTATS & CONTROLLERS
CC-1G-K Plastic capillary and sensor holder mounting clip BA/ADP-525-7-WMW Warm white adaptor plate 7" x 5 .25" BA/ADP-525-7-OFW Off white adaptor plate 7" x 5 .25" BA/ADP-525-7-CPW Copla white adaptor plate 7" x 5 .25" BA/FOAMBACK White foam back insulator, 4 .4" x 2 .6" BA/FOAMBACK-GREY Grey foam back insulator, 4 .4" x 2 .6"
Hole Diameter: 1 .65"
APB-28 Adjustable pipe bracket 2"-8" diameter
21
PN-46 Aluminum sensor holder with adhesive backing
March 2014 WE MAKE IT EASY. kele.com 888-397-5353 USA 1391 THERMOSTATS & CONTROLLERS THERMOSTAT GUARDS ATK, BA, TG, TG500 SERIES
DESCRIPTION The TG, ATK and BAPI-Guard Thermostat Guards are used to enclose and protect wall thermostats and sensors against tampering, damage, and unauthorized adjustment of thermostat settings .
FEATURES TG500 Series Vented Guards NEW! • Patented, double-wall construction • Available in various sizes • Opaque plastic, clear plastic or painted steel BAPI-GUARD • Includes ring base, cover, lock and two keys BAPI-Guard Series Vented Guards TG510A • Clear low profile design • All mounting and hardware included • Key lock for vertical or horizontal mounting • Two sizes to fit most applications • Hammer tough ATK Series • Available in wire and cast aluminum TG-1 • Vertical and horizontal mounting TG Series Vented Guards • One piece U.V. stabilized high impact molded polycarbonate housing • Ring base is 16 gauge steel with white finish and four mounting holes • Stainless steel fastners secure housing to base • Ventilation holes allow air to circulate freely ATK03 ATK04
ORDERING INFORMATION Solid Inside Dimensions Outside Dimensions Ring Wall Height Width Depth Height Width Depth Model Size Cover Base Plate in (cm) in (cm) in (cm) in (cm) in (cm) in (cm) TG510A1001 Small Clear Clear Opaque 4.38 (11.13) 4.38 (11.13) 2.25 (5.72) 5.88 (14.94) 5.88 (14.94) 2.5 (6.35) TG510D1005 Painted Steel (off-white) Opaque 4.38 (11.13) 4.38 (11.13) 2.25 (5.72) 5.88 (14.94) 5.88 (14.94) 2.5 (6.35) BA/BG2 Clear Clear — 4.8 (12.3) 2.9 (7.4) 1.43 (3.65) 6.75 (17) 4.75 (12) 2.1 (5.4) ATK03 Wire — 4.25 (10.80) 2.63 (6.66) 1.63 (4.12) — — — ATK04 Cast Aluminum 4.25 (10.80) 2.75 (6.98) 1.63 (4.12) F229-0225 Clear 3.88 (9.86) 3.5 (8.89) 2.5 (6.35) TG511A1000 Medium Clear Clear Opaque 5.06 (12.85) 6.06 (15.39) 2.63 (6.68) 6.5 (16.51) 7.5 (19.05) 2.94 (7.47) TG511D1004 Painted Steel (off-white) Opaque 5.06 (12.85) 6.06 (15.39) 2.63 (6.68) 6.5 (16.51) 7.5 (19.05) 2.94 (7.47) F29-0227 Clear — — 5.25 (13.34) 4.63 (11.76) 3.25 (8.26) THERMOSTATS & CONTROLLERS TG-1 Large Pearlescent White — 2.8 (7.1) 5.0 (12.7) 3.1 (7.9) 5.375 (13.7) 7.75 (19.7) 4.25 (10.8) TG-2 Clear White 2.8 (7.1) 5.0 (12.7) 3.1 (7.9) 5.375 (13.7) 7.75 (19.7) 4.25 (10.8) TG-37 Prismatic White 3.0 (7.6) 5.5 (14.0) 3.1 (7.9) 5.875 (14.9) 8.5 (21.6) 4.125 (10.5) 21 TG512A1009 Clear Clear Opaque 5.88 (14.94) 8.38 (21.29) 3.0 (7.62) 7.25 (18.42) 9.75 (24.77) 3.38 (8.59) TG512D1003 Painted Steel (off-white) Opaque 5.88 (14.94) 8.38 (21.29) 3.0 (7.62) 7.25 (18.42) 9.75 (24.77) BA/BG Clear Clear — 6.9 (17.5) 4.7 (11.8) 1.75 (4.43) 9.45 (24) 9.45 (24) 3.0 (7.6) ATK63 Wire — — 6.50 (16.51) 6.38 (16.21) 3.0 (7.62) — — — F29-0231 Clear 7.06 (17.93) 4.13 (10.49) 2.25 (5.72) F29-0413 6.36 (16.15) 3.5 (8.89) 3.25 (8.26) F29-0198 8.13 (20.65) 4.63 (11.76) 3.63 (9.22) F29-0220 Painted Steel (beige) 7.13 (18.11) 4.63 (11.76) 3.25 (8.26) F29-0222 Mounted 6.63 (16.84) 4.50 (11.43) 338 (8.58) F29-0192 Hinged 6.25 (15.88) 4.75 (12.07) 3.0 (7.62) F29-0193 Hinged 6.0 (15.24) 3.82 (9.7) 3.13 (7.95
1392 888-397-5353 USA kele.com WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE. March 2014