Optimized Handling. The new generation of wet stone grinders. Wet stone grinder

FLEX and natural stone. A special relationship.

Natural stone has its own laws. That call for special experts. Specialists who know how to read the stone. Who by the nuances and shades of the colours in the stone can recognise the unique masterpiece that a completely sculptured piece of work can evolve, but to realize this vision good tools are needed.

For over 80 years FLEX is the competent and innovative partner for working with natural stone. Over this course of time a comprehensive range of machines has been developed in close co-operation with experienced stone masons. A product range that sets the industry standards for robustness and reliability also with handling and maintenance but especially by working safety when using water.

The long-time competence of FLEX also includes the knowledge that FLEX engineers have gained about the nature of stone, its characteristics, and its sensitivities. That is why a FLEX machine of course does not damage or soil the valuable “natural stone”, but professionally processes and preserves it. As in every perfect relationship allows you to work to perfection. Wet stone grinder

The FLEX PRCD safety switch ensures electrical safety when undertaking wet sanding. Is released practi- cally immediately (< 15 milliseconds)at the required response sensitivity. Complete with accidental restart safeguard on the power being interrupted.

The contour plug is standard equipment on many wet grinders. It can be plugged only into the isolation transformer and not into the power outlet.

The extensive FLEX natural stone range provides everything - from pressurized water tank, isolating transformers and safety vacuum cleaners to grinding discs, abrasive rings and diamond tools.

You don‘t have to search long when selecting the required grain with the Velcro diamond discs. Thanks to the colour-coded system you can identify the dif- ferent grains just by their colour. And the practical Velcro attachment allows for speedy replacement.

3 4 Wet stone grinder L/LE 12-3 100 WET

The new generation of wet stone grinders from FLEX. Building on the successful design of the long-proven LW 1703 and LW 1503 grinders, the wet stone grinders L 12-3 100 WET and LE 12-3 100 WET are the next step forward. In future the L 12-3 100 WET will replace the familiar LW 1503 and LW 1703 machines. With integral electronic control the LE 12-3 100 WET brings something new to this class. Both machines are available in two versions “Transformer” (with connector cable and a 12 h contour plug for connection to an isolating transformer) and “PRCD” (portable residual current device integrated in the cable).

The grip hood and the bail handle Easy tool change with the integra- Both types feature a powerful The brass water connection for the ensure comfortable handling and ted spindle stop. 1150 watt motor and built-in ½” water hose is not attached allow the machine to be guided with electronics with soft start, overload directly to the device but to an precision. Even when working on protection and constant speed extremely flexible 2 m long special vertical surfaces, the machine can control. The LE 12-3 100 WET also hose. always be held securely. features stepless speed adjustment from 1200-3700 rpm.

Tool fixture: M 14 The water supply and control are Simple and easily accessible The special hose does not require situated below the housing. This operation of the water control. additional hose safety devices. This provides an unobstructed grip area prevents injuries from hose clips. directly above the sanding pad 5 6 Wet stone grinder L/LE 12-3 100 WET

Optimized handling for top quality surfaces.

The L 12-3 100 WET, LE 12-3 100 WET wet stone grinders and the FLEX Dia-Jet velcro diamond discs are ideally suited for polishing cut edges. The water connection is located below the housing. The machines can now be guided precisely and safely in any position and without obstructing the view of the workpiece. Thanks to the high torque, the wet stone grinders perform reliably in almost any position and at almost any pressure.

The superb handling and the unobstructed grip area allow edges to be Working on vertical surfaces is now easier thanks to the grip hood and the worked exactly and precisely. ergonomically shaped bail handle. The machines can always be guided safely.

7 Wet stone grinder

L 12-3 100 WET LE 12-3 100 WET

1150 watt wet stone grinder, 115 mm 1150 watt variable-speed wet stone grinder, 115 mm • Powerful 1150 watt motor see L 12-3 100 WET, additional with • FR full-wave electronic control: tachogenerator constant speed • VR full-wave electronic control: tachogenerator constant speed control, soft start, overload protection control, soft start, overload protection and speed selection • High torque for maximum material removal and optimum surface quality • Powder-coated and varnished magnetic pad for a long service life, thanks to the additional protection against wear and abrasive dust • Grip hood for easy handling and precise working • Bail handle: Secure grip, even when working on vertical surfaces • The new water feed and control system is located below the housing, which makes operation and precise dosing easy. An unobstructed grip area is provided directly above the backing pad • 2 m special hose: No additional hose safety devices required. Increases flexibility, reduces weight and prevents risk of injury from hose clips • Quick-fit brass coupling: for 1/2“ water hose • Contour plug: can be connected only to an isolating transformer. For safety reasons, operation is permitted only connected to the FLEX TT 2000 isolating transformer • Spindle lock

Available with PRCD portable residual Available with PRCD portable residual current device (integrated in the ca- current device (integrated in the ca- ble) or contour plug (for safety reasons ble) or contour plug (for safety reasons operated via isolating transformer FLEX operated via isolating transformer FLEX TT 2000 only). TT 2000 only).

SPECIFICATIONS SPECIFICATIONS Max. disc diameter 115 mm Max. disc diameter 115 mm No load speed 3700 rpm No load speed 1200-3700 /min Power input 1150 watt Power input 1150 watt Power output 700 watt Power output 700 watt Tool fixture M 14 Tool fixture M 14 Size (L x H) 340 x 140 mm Size (L x H) 340 x 140 mm Connecting hose with quick Connecting hose with quick 2 m 2 m coupling coupling Weight 2,4 kg Weight 2,4 kg

Type Order No. Type Order No. Standard Equipment: Standard Equipment: L 12-3 100 WET 375.675 LE 12-3 100 WET, contour plug 368.660 1 bail handle 1 bail handle L 12-3 100 WET, PRCD 378.488 1 hook-and-loop cable ties LE 12-3 100 WET, PRCD 378.461 1 hook-and-loop cable ties

8 Wet stone grinder

LW 802 VR LW 1202/LW 1202 S

1800 watt wet stone grinder with plug 1600 watt wet stone grinder, 130 mm for isolating transformer, 130 mm • Central water supply through gear shaft: for wet grinding of • VR full-wave electronic control: tachogenerator constant speed granite and marble control, soft start, overload protection and speed selection • Quick-fit brass coupling: for 1/2“ water hose • Central water supply through gear shaft: for wet grinding of • Rugged metal composite housing for optimum heat dissipation granite and marble • GFCI operator protector circuit breaker: integrated in cord • Quick-fit brass coupling: for 1/2“ water hose • Tool fixture: M 14 • Contour plug: can be connected only to an isolating transformer. For safety reasons, operation is permitted only connected to the FLEX TT 2000 isolating transformer • Tool fixture: M 14

Available with PRCD portable residual current device (integrated in the ca- ble) or contour plug (for safety reasons operated via isolating transformer FLEX TT 2000 only).

SPECIFICATIONS SPECIFICATIONS Max. disc diameter 130 mm Max. disc diameter 130 mm No load speed 1750 rpm No load speed 800-2400 rpm Power input 1600 watt Power input 1800 watt Power output 1040 watt Power output 1200 watt Weight 5,1 kg Weight 4,3 kg Type Order No. Standard Equipment: Standard Equipment: LW 1202, contour plug 276.375 Type Order No. 1 bail handle 1 bail handle LW 802 VR 258.597 1 open-ended wrench, SW 17 LW 1202 S, PRCD 289.000 1 open-ended wrench, SW 17

9 Wet stone grinder

LWW 2106 VR WD 10

2200 watt edge milling tool for granite Pressurized water tank 10 l with GFCI circuit breaker • Working pressure 6 bar • VR full-wave electronic control: tachogenerator constant speed • Ideal for mobile working control, soft start, overload protection and speed selection • Fits all machines with a quick-fit coupling for a ½“ water hose • Central water supply through gear shaft: for wet grinding of granite and marble • Aluminum guide carriage: with plastic balls for easy control, corrosion-protected • GFCI operator protector circuit breaker: integrated in cord • Quick-fit brass coupling: for 1/2“ water hose • Rugged metal composite housing for optimum heat dissipation • Tool fixture: G 1/2“ • Ideal for profiling granite slabs

SPECIFICATIONS No load speed 1800-5500 rpm For slab thickness 20-40 mm Power input 2200 watt SPECIFICATIONS Power output 1540 watt Capacity 10 l Weight 13,7 kg Standard Equipment: Weight 4,5 kg 1 hexagon socket screw key, special tool 8 Type Order No. Type Order No. 1 open-ended wrench SW 32 Standard Equipment: LWW 2106 VR 253.705 1 splash guard WD 10 251.622 4 m pressure hose

10 Wet stone grinder

Accessories wet grinding

Rubber coupling

For all applications where a smooth grinding is required. Adapts itself together with the Velcro backing pad flexibly to the surface of the workpiece. Is screwed on as an adapter bet- ween the M14 machine connection and the velcro backing pad.

QP Order No. 1 240.338

Velcro pad, soft

For secure attachment of the velcro diamond discs. M 14 connection. TT 2000 Dimensions QP Order in mm No. Isolating transformer 100 Ø 1 253.814 • With contour socket for all FLEX machines with contour plug. Earth contact in 12 o‘clock position Dia-Jet velcro diamond discs wet (single) • Including one socket without earthing contact For grinding and polishing: Suitable for artificial stone, natural stone, stoneware and ceramics. The grinding output of the diamond discs is higher than that of traditional abrasives, they have a very long service live and high mechanical resilience.

Dimensions Grit Colour QP Order in mm No. 100 Ø grit 60 dark green 1 253.815 100 Ø grit 100 blue 1 253.816 100 Ø grit 200 light green 1 253.817 100 Ø grit 400 yellow 1 253.818 100 Ø grit 800 orange 1 253.819 100 Ø grit 1500 red 1 253.820 100 Ø grit 3000 brown 1 253.821 100 Ø grit 10000 black 1 253.822

Dia-Jet Velcro diamond discs wet in a set

Set with 5 grains. For grinding and polishing.

Dimensions Grit QP Order in mm No. 100 Ø grit 100 -1500 5 253.823

Adapter plate

For grinding rings with quick-action coupling. Thread M14.

Dimensions QP Order in mm No. 100 Ø 1 126.098

SPECIFICATIONS Grinding rings Max. performance up to 45 2000 VA For plastic quick-action coupling backing pads, Order no. min. non-stop operation 126.098 Size (W x L x H) 200 x 200 x 270 mm Primary voltage 230 V Dimensions Grit QP Order in mm No. Secondary voltage 230 V 100 Ø F 30 1 126.144 Weight 15,8 kg 100 Ø F 60 1 126.152 100 Ø F 120 1 126.160 Type Order No. TT 2000 373.370

11 Blind hole drils

BHW 1549 VR BED 18

Blind hole drill with integrated water feed and GFCI Anchor drilling unit with integrated water feed and circuit breaker GFCI circuit breaker • VR electronic control: with tachogenerator constant speed • VR electronic control: with tachogenerator constant speed control, overload protection, and speed selector wheel control, overload protection, and speed selector wheel • Quick-fit brass coupling: for ½” water hose • Suction cup and vacuum: for fixing to smooth surfaces • Integral water feed through the drive shaft ensures optimum • Precise drill centring by accurate positioning with cross-hair cooling of diamond bits registration marks • For hand operation or for use on our BD 6 and BD 18 drill stands • Quick-fit brass coupling: for ½” water hose • Can also be used with FLEX pressurized water tanks • Adapter for vacuum extraction • GFCI operator protector circuit breaker: integrated in cord • Ideal for hard, fragile materials, including porcelain stoneware tiles, concrete, stone and masonry • When using FLEX industrial vacuums to extract drilling sludge, an additional vacuum is created to allow vacuum fastening of the drill stand • Integrated water feed through the drive shaft

SPECIFICATIONS Power input 1200 watt SPECIFICATIONS Power output 700 watt Power input 1200 watt Speed under load 3000-9000 rpm Power output 700 watt

No load speed 3500-10000 /min No load speed 3500-10000 rpm Standard Equipment: Tool fixture M 14 Tool fixture M 14 1 suction cup Diamond drill Ø 5-10 mm Diamond drill Ø 6-14 mm 1 bail handle Weight 3,3 kg Standard Equipment: Weight 4,1 kg 1 stationary drill stand with column 1 bail handle guide, BD 18 1 open-ended wrench SW 17 1 vacuum hose connection Type Order No. 1 splash guard Type Order No. 1 sharpening stone BHW 1549 VR 299.197 1 metal carrying BED 18 290.300 1 metal carrying case

12 Core drilling machines

BED 55 BED 69

Core drilling unit with integrated water feed and GFCI Core drilling unit for drilling edges in facing slabs and circuit breaker GFCI circuit breaker • VR electronic control: with tachogenerator constant speed • VR electronic control: with tachogenerator constant speed con- control, overload protection, and speed selector wheel trol, overload protection, and speed selector wheel • Stationary drill stand: with precision column guide, drill stroke • Clamping device: for slab thickness from 20 to 50 mm, with up to 300 mm 2 adjustable stops (60/60 cm) • Water collector with suction cup: for collecting water, even on • Integrated water feed through the drive shaft stairs • Drilling unit works torsion-free and at an exact right angle • Safety slip clutch: offers protection if the core drill is jammed • Quick-fit brass coupling: for ½” water hose • Quick-fit brass coupling: for ½” water hose • GFCI operator protector circuit breaker: integrated in cord • Sturdy drill stand with side support and long spindle travel • The spindle drive unit swings, making corners and recesses on parapets, gravestones and in baths accessible • Integrated water feed through the drive shaft • GFCI operator protector circuit breaker: integrated in cord

SPECIFICATIONS Power input 1200 watt Power output 700 watt SPECIFICATIONS 350-1000 / Speed under load Power input 800-2300 / 1200 watt 1st/2nd/3rd gear 1600-4600 rpm Power output 700 watt Tool fixture G ½“ No load speed 3500-10000 rpm Diamond drill bit Ø 12-85 mm Tool fixture M 14 Surface area occupied by stand 420 x 120 mm Diamond drill bit Ø 5-14 mm Weight (complete unit) 17,2 kg Weight (complete unit) 15,5 kg

Standard Equipment: Type Order No. Water collection up to 50 mm Ø Type Order No. Standard Equipment: BED 55 257.081 Stationary drill stand BD 05 BED 69 254.175 Stationary drill stand BD 06

13 Core drilling machines

Wet drill bit

Diamond hollow hole drill bits

The hollow hole drill bits are suitable for use on machines with integrated water supply and M 14 spindle thread. Vibrationfree drilling in tiles (all hardnesses), fine stoneware (up to hardness 5), natural stone, granite.

Designation Diameter Length QP Order in mm in mm No. DD-WET D5x30 M14 5 30 1 386.359 DD-WET D6x30 M14 6 30 1 386.367 DD-WET D8x30 M14 8 30 1 386.375 DD-WET D10x30 M14 10 30 1 386.383 BHW 812 VV

Core drilling machine for wet drilling and GFCI circuit breaker • VV electronic control: constant speed control, soft start with continuous speed control trigger, overload protection, temperature monitoring and speed selection • Long additional handle: turns and latches in pre-set positions to absorb high torque in freehand operation • Safety slip clutch: offers protection if the core drill is jammed • Clamping neck: 53 mm, suitable for application in drilling stands • Quick-fit brass coupling: for ½” water hose • Integrated water feed through the drive shaft • GFCI operator protector circuit breaker: integrated in cord Diamant-Hohlbohrer • Mechanical 2-speed gear unit and variable, electric speed setting provide optimum speeds for a wide range of drilling diameters M 14, wet, for natural stone and fine stoneware tiles. • Suitable for hammer-free drilling of concrete, flush fitting of Diameter T in mm L in mm QP Order junction flue connections and cutting breakthroughs in mm No. • Also ideal for precise drilling holes to fix heavy-duty anchors 6 Ø 58 88 1 315.052 8 Ø 73 103 1 315.060 10 Ø 88 118 1 315.079 12 Ø 98 128 1 315.087 14 Ø 113 143 1 315.095

Accessories BED 18

Suction hose

Vacuum hose, consisting of: 1 vacuum hose (255.505) and 1 vacuum hose connection (255.507).

QP Order No. SPECIFICATIONS 1 255.506 Power input 1800 watt Power output 1200 watt Vacuum hose Speed under load 1st/2nd 0-1000 / gear 0-3800 rpm Standard Equipment: QP Order 1 handle No. Tool fixture G ½“ 1 open-ended wrench SW 22 1 255.505 Clamping neck Ø 53 mm 1 open-ended wrench SW 32 Max. drill hole Ø in concrete 85 mm 1 wrench case Vacuum hose connection Max. drilling Ø masonry 185 mm 1 drill depth stop Weight 4,7 kg 1 clamp fitting with ratchet clip QP Order and centering aid No. 1 GFCI operator protection circuit 1 255.507 Type Order No. breaker in cord BHW 812 VV 277.940 1 plastic carry case

14 Bushhammers

LST 803 VR LST 1503 VR

Bushhammer for stairs and large surfaces Bushhammer for stairs • VR full-wave electronic control: with speed selection and • VR full-wave electronic control: with speed selection and constant speed control, soft start, overload protection. constant speed control, soft start, overload protection. • Working width adjustable: 7 stages from approx. 55 mm to • Working width adjustable: 3 stages from approx. 40 mm up to 130 mm 92 mm • Guide: continuously adjustable for precise work along stone • Guide: continuously adjustable for precise work along stone edges edges • Dust extraction: for use even in occupied buildings • Dust extraction: for use even in occupied buildings • Fitted with 80 aggressive carbide tips, the power tool rapidly and • Fitted with 60 aggressive carbide tips, the power tool rapidly and precisely copes with all roughening work precisely copes with all roughening work • Sits comfortably in the hand and has a grip guard and a shaft • Rotating tool head on rubber bearings, reducing noise and handle, making it easy to guide vibration and increases the life of the drive unit • Rotating tool head on rubber bearings, reducing noise and • The grip guard directly over the tool enables precise guidance of vibration and increasing the life of the drive unit the power tool

SPECIFICATIONS SPECIFICATIONS No load speed 800-2400 rpm No load speed 800-2400 rpm Power input 1800 watt Power input 1200 watt Power output 1200 watt Standard Equipment: Power output 700 watt Standard Equipment: Working width 55-130 mm 1 grip cover Working width 40-92 mm 1 grip cover Weight 7,2 kg 1 stop, complete Weight 5,9 kg 1 stop, complete 1 carbide tipped complete 140 Ø 1 carbide tipped complete 100 Ø 1 hexagon socket screw key, 1 hexagon socket screw key, Type Order No. special tool 5 Type Order No. special tool 5 LST 803 VR 259.639 1 pin wrench LST 1503 VR 259.229 1 pin wrench

15 Dry grinders

LG 1704 VR LK 602 VR

1500 watt for heavy-duty grinding jobs, 178 mm Polisher with grip hood for natural stone work • Highly efficient and resilient motor for more power output • VR electronic control: tachogenerator-controlled constant speed, • VR full-wave electronic control: with speed selection and soft-start, overload protection and speed selection constant speed control, soft start, overload protection. • Integrated air deflection: protects against direct air flow • Spindle lock: for easy disc changes • Perfect cooling for heavy-duty use. • Ideally suited to low and medium-speed use with various • Plastic grip guard allows extremely sensitive guiding grinding mediums • Grip hood: detachable • Rubber rest bar protects machine and surface of workpiece • Spindle lock: for easy disc changes • Ideal for cleaning, conserving, polishing and care of natural stone flooring

SPECIFICATIONS Max. polishing pad diameter 220 mm SPECIFICATIONS Max. back-up pad diameter 175 mm Max. disc diameter 178 mm No load speed 800-2400 rpm No load speed 1400-4200 rpm Power input 1500 watt Power input 1500 watt Power output 1000 watt Power output 1000 watt Tool fixture M 14 Weight 2,7 kg Weight 3,5 kg

Type Order No. Standard Equipment: Type Order No. Standard Equipment: LG 1704 VR 293.768 1 side handle LK 602 VR 258.580 1 side handle

16 Dry grinders

Accessories LST 803 VR, LST 1503 VR

Replacement carbide wheels Velcro backing pad Ø 115, Bowl

for LST 1503 VR Backing pad Bowl with velcro face for securing abrasives with velcro system. 12 mm cellular rubber damping element ensures QP Order uniform pressure distribution. No. 6 259.833 Dimensions QP Order in mm No. 115 Ø 1 366.609 for LST 803 VR

QP Order Diamond grinding pad No. 8 259.834 For use with velcro grinding disc 115 Ø. Grinding pads for dry grinding, a great advantage in the repair and renovation areas. Suitable for grinding and polishing granite worktops, fine sto- Replacement bearing block with 2 carbide wheels neware tiles, floor tiles, concrete surfaces in the field of vision, natural stone on windowsills, cover panels, sculptures, steps. for LST 1503 VR und LST 803 VR

QP Order Designation Dimensions Grit QP Order No. in mm No. 1 260.576 DP 50 DRY D115 115 Ø 50 1 386.197 DP 100 DRY D115 115 Ø 100 1 386.200 DP 200 DRY D115 115 Ø 200 1 386.219 Accessories dry grinding DP 400 DRY D115 115 Ø 400 1 386.227 DP 800 DRY D115 115 Ø 800 1 386.235 Rubber coupling DP 1500 DRY D115 115 Ø 1500 1 386.243 DP 3000 DRY D115 115 Ø 3000 1 386.251 For all applications where a smooth grinding is required. Adapts itself together with the Velcro backing pad flexibly to DP 10000 DRY D115 115 Ø 10000 1 386.278 the surface of the workpiece. Is screwed on as an adapter bet- ween the M14 machine connection and the Velcro backing pad. Cutting guards QP Order No. 125 mm cutting guard 1 240.338 With guide block and 32 mm Ø extraction nozzle for cutting discs with 125 mm Ø for flange without groove. Velcro backing pad (soft) Dimensions QP Order For secure attachment of the velcro diamond discs. M 14 in mm No. connection. 125 Ø 1 254.797 Dimensions QP Order in mm No. With guide block and 32 mm Ø extraction nozzle for cutting discs with 125 mm Ø for flange with groove. 100 Ø 1 253.814

Dimensions QP Order in mm No. 125 Ø 1 283.533

230 mm cutting guard

For push and pull cuts with vacuum set and adjustable support, extraction nozzle with 32 mm outer Ø, collar Ø 62 mm, cut depth 65 mm max.

Dimensions QP Order in mm No. 230 Ø 1 252.963

17 Diamond stone saw

CS 60 WET

Diamond stone cutter for wet cuts, mitre cuts up to 45°, with GFCI circuit breaker • High-performance motor: extra powerful for stone cutting and joint milling • Continuous cut depth setting from 0-60 mm, with rail guide up to 54 mm. In the mitre cut from 0-44 mm, with guide rail up to 38 mm • Continuous angle adjustment for mitre cuts from 0-45° • Cut marking at the base plate from 0°/30°/45° for rapid orientation • High-quality magnesium die-castings for protective cover and base plates • Motor protection made of rubber prevents the direct intake of spray water • Water supply: for an effective cooling of the diamond blade • Quick-fit brass coupling: for 1/2“ water hose • GFCI operator protector circuit breaker: integrated in cord • Ideal for: Inserting water grooves in window sills or steps, work tops, facade slabs, terazzo slabs in garden design & landscaping, joint renovation in the floor • Spindle lock

SPECIFICATIONS Diamond cutting disc Ø / 170 / 22,2 mm arbor (inside Ø) Cutting depth / with guide 60 / 54 mm rail Mitre cuttings 0-45°

Depth of cut - mitre cut 5-44 mm

Depth of cut - mitre cut 0-38 mm with guide rail

No load speed 6200 rpm Power input 1400 watt Standard Equipment: Power output 840 watt 1 diamond cutting disc with Weight 4,5 kg segmented cutting edge 1 wrench for saw blade change 1 parallel guide fence Type Order No. 1 plastic system case CS 60 WET 374.016 1 case insert

18 Diamond stone saw

Accessories CSW 4161, CS 60 WET

Diamond cutting disc Connector for guide fence GRS

With turbo segments for a clean wet cut; suitable Precise metal connector for connecting two guide rails GRS. for tiles and fine stoneware of any thickness up to hardness 5, When not in use, the connector can be parked in the guide rail marble, slate, granite and natural stone. with the included tool wrench SW 5 - screw driver.

Designation Dimensions QP Order in mm No. Turbo-F-Jet D170x22,2 170 Ø x 22,2 1 386.189 QP Order No. 1 353.272

End caps

Replacement parts for GRS 80/160 guide rails.

QP Order No. 2 364.967

Antislip profile

Replacement parts for GRS 80/160 guide rails.

With segmented cutting edge, vibration-dampened. QP Order For granite, marble, sandstone, concrete. No.

Dimensions QP Order 6,8 m 366.854 in mm No. 170 Ø x 22,2 1 347.515 Anti-splinter guard Replacement parts for GRS 80/160 guide rails. With closed cutting edge for a clean wet-cut, suitable for tiles, marble plates and ceramics. QP Order No. Dimensions QP Order 3,4 m 366.846 in mm No. 170 Ø x 22,2 1 367.214 Plastic system case

Systainer for machine and accessories. Guide rail GRS QP Order Precise aluminium profile with anodized sliding and No. guide rib.. Plugged rubber lip as contact edge at the marking, 1 353.302 anti slip protection on the bottom. Connector 353.272 can be used to extend the guide rails as required. Insert for

Designation Länge QP Order Insert for CSW 4161 or CS 60 WET and accessories, in mm No. fits systainer 353.302. GRS 80 800 1 353.280 GRS 160 1600 1 359.351 QP Order No. 1 353.310

19 www.flex-tools.com FLEX-Elektrowerkzeuge GmbH, FLEX-Elektrowerkzeuge For more,seewww.flex-tools.com long servicelife,performanceandhighfunctionalityinmanyindustries. with therequirementsofcraftsmen.Thisresultsinproductsthatarefamousfortheir quality powertools.Thisisoneofthesecretsoursuccess:Wearecloselyaligned Since 90years,Stuttgart-basedFLEXhasbeenknownasamanufacturerofhigh- original. The FLEX. Your specialistretailer angle grinder–aFLEXinvention This meansperformance:thehigh-speed Bahnhofstraße 15, 71711 Steinheim, Germany. Phone Phone Germany. Steinheim, 71711 15, Bahnhofstraße + 49 (0) 7144 828-0, Fax Fax 828-0, 7144 (0) 49 or byemail:[email protected] per phone+49(0)7144828-0 For exactdirections,contactus www.flex-tools.com! or FLEX retailer competent your contact please a grinders and a information more For + 49 (0) 7144 258-99, www.flex-tools.com 258-99, 7144 (0) 49 ll other FLEX products products FLEX other ll bout bout wet stone

02-2012 / The fittings of the machines correspond to the usual standard equipment. Technical specifications are subject to change without prior notice. FLEX accepts no responsibility for mistakes and errors.