DOCSLIB.ORG

Floorcare / Cleanup

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Floorcare / Cleanup Combo Packs: Buckets and Wringers 6000 / 2635-3 color 6000 Plastic Squeeze Wringer/2635-3 6B/2635-3B blue. 6G/2635-3G gray. 6O/2635-3O Plastic Bucket orange. 6Y/2635-3Y yellow. 6/2635-3GN green Plastic Squeeze Wringer 4G/2635-3G gray. 4Y/2635-3Y yellow • splash guard water vents to eliminate squirting and 2/2635-3G gray. 2/2635-3Y yellow 6000 / 2635-3 splashing • reinforced nylon bearings for smooth operation and 2000 / 260 metal one piece welded steel handle for durability • structurally foamed polyethylene wringer PRO-Y yellow Plastic Bucket w/ 3” Casters PRO-G gray Floorcare/Cleanup • provides large mop target area 460 / 4000G gray • molded from high density polyethylene for durability and corrosion resistance 460 / 6000G gray • single bail allows heavy loads to be lifted • unique inboard caster configuration keeps bucket capacity from marring walls or collecting dirt in and around side struts 6000 / 2635-3 – 26-35-qt. 4000 / 2635-3 – 26-35-qt. 4000 / 2635-3 2000 / 2635-3 – 26-35-qt. 4000 / 2635-3 4000 Plastic Down Pressure Wringer/2635-3 Plastic Bucket 2000 / 260 – 26-qt. • same features as 6000 / 2635-3 but with 4000 down PRO-Y – 26-35-qt. pressure wringer • 3” casters PRO-G – 26-35-qt. 460 /4000 – 46-qt. 2000 / 2635-3 (not shown) 460 / 6000 – 46-qt. 2000 Metal Squeeze Wringer/2635-3 Plastic Bucket packaging • same features as 6000/2635-3, but with 2000 metal squeeze wringer 6000 / 2635-3 – 1/cs. • 3” casters 4000 / 2635-3 – 1/cs. 2000 / 260 2000 / 260 2000 / 2635-3 – 1/cs. 2000 Metal Squeeze Wringer/26-Qt. 2000 / 260 – 1/cs. Metal Bucket PRO-Y – 1/cs. • bucket and wringer packed in one carton • 2” casters PRO-G – 1/cs. 460 / 4000 – 1/cs. PRO-Y 460 / 6000 – 1/cs. Pro-Pac 2000 Metal Squeeze Wringer/2635-3 Plastic Bucket • 5-yr. guarantee • foam grip handle • strong, long-lasting combo pack • designed for professionals • 3” casters PRO-G (not shown) PRO-Y Pro-Pac 2000 Metal Squeeze Wringer/2635-3 Plastic Bucket • same features as PRO-Y Pro-Pac • 3” casters 460 / 4000 46-Qt. “Never-Lift” Bucket/4000 Down Pressure Wringer • bucket and wringer packed in one carton • 3” casters 460 / 6000 (not shown) 460 / 4000 46-Qt. “Never-Lift” Bucket/6000 Squeeze Wringer • same features as 460/4000, but with WH6000 squeeze wringer • 3” casters 4 Wringers Floorcare/Cleanup color WH6000 WH6000B blue. WH6000G gray. WH6000O orange. Plastic Squeeze Wringer WH6000Y yellow • splash guard water vents to eliminate squirting and 4000G gray; 4000Y yellow splashing • unique hopper design accommodates full range of WH2000 metal mop sizes WH6000 716 metal • reinforced nylon bearings for smooth operation and one piece welded steel handle for durability 726 metal • structurally foamed polyethylene wringer 736 metal • accommodates 12-32 oz. mops 165 galvanized steel 166 galvanized steel 4000 Plastic Down Pressure Wringer dimensions/capacity • fiberglass reinforced nylon gear and rack drive for increased wringing strength WH6000 – 9-3¼4” H x 14-1¼2” L x 10-7¼8” W • unique gate configuration allows all types of mop 4000 – 12-7¼8” H x 16-3¼4” L x 10” W handles to be used • structurally foamed polyethylene wringer 4000 WH2000 – 15” H x 8-7¼8” L x 9-3¼8” W • accommodates 16-40 oz. mops 716 – 13” H x 6” L x 8-1¼8” W 726 – 18-3¼4” H x 7” L x 9-1¼2” W WH2000 736 – 18-3¼4” H x 8” L x 10-3¼8” W Metal Squeeze Wringer • two-piece tubular steel handle and solid 5¼8” 165 – 16-qt. square steel shaft 166 – 16-qt. • fully vented with large drain openings on all sides, allowing water released by wringing force to flow WH2000 packaging quickly into bucket • superior, large angle linkage system allows WH6000 – 1/cs. maximum force throughout the wringing cycle 4000 – 1/cs. • constructed from the highest quality, heavy electroplated cold rolled steel WH2000 – 1/cs. • accommodates 8-16 oz. mops 716 – 1/cs. 726 – 1/cs. 716 Metal Gear Down Pressure Wringer 736 – 1/cs. 716 / 726 / 736 • eccentric gearing system forces pressure pads 165 – 2/cs. straight down on the mop for easy, no-splash 166 – 1/cs. wringing • accommodates 8-16 oz. mops 726 Metal Gear Down Pressure Wringer • same features as the 716 wringer • accommodates 16-24 oz. mops 736 Metal Gear Down Pressure Wringer 165 • same features as the 716 wringer • accommodates 24-40 oz. mops 165 16-Qt. Oval Pull-Thru Wringer • constructed of durable mill galvanized steel • hand soldered seams • hardwood rollers • excellent for mopping and clean up needs 166 166 16-Qt. Oval Pull-Thru Wringer w/ 2” Casters • constructed of durable mill galvanized steel • hand soldered seams • hardwood rollers • excellent for mopping and clean up needs 5 Wringers – cont. 266 color 26-Qt. Oval Pull-Thru Wringer w/ 2” 266 galvanized steel Casters 1500X2 galvanized steel • constructed of durable mill-galvanized steel • hand soldered seams 266 capacity • hardwood rollers • 2” casters 266 – 26-qt. 1500X2 – 14-qt. 1500X2 14-Qt. Econo Oval Pull-Thru Wringer packaging Floorcare/Cleanup • constructed of durable mill-galvanized steel 266 – 1/cs. • hand soldered seams • hardwood rollers 1500X2 – 2/cs. • excellent for mopping and clean up needs 1500X2 Buckets 2635-3 color 26/35-Qt. Bucket w/ 3” Casters 2635-3B blue. 2635-3G gray. 2635-3O orange. • provides large mop target area 2635-3Y yellow • molded from high density polyethylene for durability 460 gray 2635-3 and corrosion resistance • single bail allows heavy loads to be lifted 16X2 galvanized steel • unique inboard caster configuration keeps bucket 160 galvanized steel from marring walls or collecting dirt in and around side struts • 3” casters dimensions/capacity 2635-3 – 18-3¼8” L x 15-5¼16” W x 14” D 460 460 – 46-qt. 46-Qt. “Never-Lift” Bucket 16X2 – 16-qt. • patented adjustable drain valve allows “Never-Lift” to adjust to any drain flow 160 – 16-qt. • removable strainer to collect large debris • largest capacity size in the industry packaging • eliminates back injuries 2635-3 – 1/cs. 460 • reduces related Workman’s Comp. claims • self-cleaning design 460 – 1/cs. • 3” casters 16X2 – 2/cs. 16X2 160 – 1/cs. 16-Qt. Oval Galvanized Steel Bucket • constructed of .024 in. mill-galvanized steel and hand soldered for extra strength and leak resistance • top reinforced with 1¼4” steel wire rim 16X2 • heavy corrugations give bucket extra strength • embossed, permanent graduations for easy measuring of water and solution 160 16-Qt. Oval Galvanized Steel Bucket w/ 2” Casters • same features as 16X2 bucket • 2” casters 160 6 Floorcare/Cleanup Buckets – cont. color 260 260 galvanized steel 26-Qt. Oval Galvanized Steel Bucket 26SS stainless steel w/ 2” Casters 260SS stainless steel • constructed of .024 in. mill-galvanized steel and 260 hand soldered for extra strength and leak resistance WH350 galvanized steel • top reinforced with 1¼4” steel wire rim 324 galvanized steel • embossed, permanent graduations for easy measuring of water and solution 332 galvanized steel • high quality, double ball bearing casters for easy 3320 galvanized steel mobility 332SS stainless steel • 2” casters 344 galvanized steel 26SS 26SS 3440 galvanized steel 26-Qt. Oval Stainless Steel Bucket • constructed from .024 in. type 430 stainless steel capacity • top reinforced with 1¼4” steel wire rim 260 – 26-qt. • heavy corrugations give bucket extra strength • embossed, permanent graduations for easy 26SS – 26-qt. measuring of water and solution 260SS – 26-qt. 260SS WH350 – 35-qt. 260SS 324 – 24-qt. 26-Qt. Oval Stainless Steel Bucket 332 – 32-qt. w/ 2” Casters 3320 – 32-qt. • same great features as 26SS bucket • 2” casters 332SS – 32-qt. 344 – 44-qt. WH350 3440 – 44-qt. 35-Qt. Oval Galvanized Steel Bucket WH350 w/ 2” Casters packaging • same great features as 260 bucket 260 – 1/cs. • 2” casters 26SS – 1/cs. 324 260SS – 1/cs. 24-Qt. Round Galvanized Steel Bucket WH350 – 1/cs. • same great features as 260 bucket, but round 324 – 1/cs. 324 / 332 332 – 1/cs. 332 3320 – 1/cs. 32-Qt. Round Galvanized Steel Bucket • same great features as 260 bucket, but round 332SS – 1/cs. 344 – 1/cs. 3320 3440 – 1/cs. 32-Qt. Round Galvanized Steel Bucket w/ 2” Casters 3320 • same great features as 260 bucket, but round • 2” casters 332SS 32-Qt. Round Stainless Steel Bucket • same great features as 26SS bucket, but round 332SS 344 44-Qt. Round Galvanized Steel Bucket • same great features as 260 bucket, but round 3440 44-Qt. Round Galvanized Steel Bucket w/ 2” Casters 344 • same great features as 260 bucket, but round • 2” casters 3440 7 Buckets – cont. 142 color 15-Qt. Plastic Divided Pail w/Wringer 142 gray • features a divided bucket with heavy-duty snap-on 145 gray cone wringer 410 galvanized steel • wringer slides from side to side accessing both compartments 414 galvanized steel 415 galvanized steel 142 145 5502 gray 5-Gal. Plastic Rectangular Pail • features a dirt screen to trap dirt in the bottom of 5505 translucent bucket 5510 gray. 5510R red Floorcare/Cleanup • heavy-duty metal handle is mounted lengthwise to ensure stability of bucket while carrying dimensions/capacity • handy, multi-purpose wet and dry caddy can be hooked inside or outside the bucket for easy access 142 – 14-qt. to cleaning supplies 145 145 – 5-gal. 410 410 – 10-qt. 414 – 14-qt. 10-Qt. Galvanized Utility Pail • mill-galvanized 24 gauge steel 415 – 15-qt. • hand soldered seams 5502 – 10-1/4” H x 10-5/8” D • heavy corrugations for strength • embossed graduations and a 1¼4” steel rod 5505 – 8-1/2” Dia.
Load more

Recommended publications
  • Optimized Handling. the New Generation of Wet Stone Grinders
    Optimized Handling. The new generation of wet stone grinders. Wet stone grinder FLEX and natural stone. A special relationship. Natural stone has its own laws. That call for special experts. Specialists who know how to read the stone. Who by the nuances and shades of the colours in the stone can recognise the unique masterpiece that a completely sculptured piece of work can evolve, but to realize this vision good tools are needed. For over 80 years FLEX is the competent and innovative partner for working with natural stone. Over this course of time a comprehensive range of machines has been developed in close co-operation with experienced stone masons. A product range that sets the industry standards for robustness and reliability also with handling and maintenance but especially by working safety when using water. The long-time competence of FLEX also includes the knowledge that FLEX engineers have gained about the nature of stone, its characteristics, and its sensitivities. That is why a FLEX machine of course does not damage or soil the valuable “natural stone”, but professionally processes and preserves it. As in every perfect relationship allows you to work to perfection. Wet stone grinder The FLEX PRCD safety switch ensures electrical safety when undertaking wet sanding. Is released practi- cally immediately (< 15 milliseconds)at the required response sensitivity. Complete with accidental restart safeguard on the power being interrupted. The contour plug is standard equipment on many wet grinders. It can be plugged only into the isolation transformer and not into the power outlet. The extensive FLEX natural stone range provides everything - from pressurized water tank, isolating transformers and safety vacuum cleaners to grinding discs, abrasive rings and diamond tools.
    [Show full text]
  • Service Parts List 54-32-2700 Specify Catalog No
    BULLETIN NO. SERVICE PARTS LIST 54-32-2700 SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS REVISED BULLETIN DATE M18™ FUEL™ 7" Polisher Apr. 2016 WIRING INSTRUCTION STARTING CATALOG NO. 2738-20 SERIAL NO. H15A SEE REVERSE SIDE EXAMPLE: 00 0 Component Parts (Small #) Are Included When Ordering 14 15 The Assembly (Large #). 30 19 21 20 16 24 17 18 19 22 23 (2x) 9a 14 (8x) 21 9b 15 13 11 10 9f 5 2 25 8 3 2 7 (2x) 7 3 6 6 (2x) 1 12 4 Recommended screw fastening sequence 8 when installing housing cover onto housing support (4x) 9c 9a 9b 9c FIG. PART NO. DESCRIPTION OF PART NO. REQ. 9 9d 9e 9f 1 49-36-2792 7" Hook and Loop Backing Plate 1 4g 9d 2 06-82-2380 8-32 x 12mm Pan Hd. Tapt. T-20 Screw 6 3 05-90-0225 Spring Washer 6 4 14-73-0022 Spindle Hub Assembly 1 9e 5 4a --------------- 5/8"-11 Output Shaft 1 (2x) 4b --------------- Dust Proof Cover 1 4c 34-80-0210 Retaining Ring 1 4f 4d --------------- Ball Bearing 1 4a 4b 4c 4d 4e 4e --------------- Spindle Hub 1 4 4e 4f 4g 4f --------------- Bevel Gear 1 3 4g 34-40-0097 O-Ring 1 (4x) 4d 5 06-82-3007 M4 x 0.7 x 8mm Pan Hd. T-20 Screw 2 6 05-88-1210 M4 x 0.7 x 14mm Pan Hd. T-20 Screw 1 7 31-55-0022 Gear Case Shroud 1 2 4c 8 05-88-1300 M4 x 1.4 x 28mm Pan Hd.
    [Show full text]
  • Kleenex Tissues
    THE PRESS Wednesday, August 30, 1961 Pag* A-8 SHASTA IN CANS w> **ir W* SOFT DRINKS KLEENEX TISSUES 12 IL Cm -II Flavors ASSORTED SPRUCE 19 CANS i nn ARDEN OR COLORS \L FOR I.UU CARNATION BOX OF 400 Men's T-Shirts Rich, creamy ice Flat-knit full combed cot­ cream in a wide var­ ton. Reinforced "non- iety of flavors. FREE! stretch" collar. Smart, Insulated Freezer medium, large. For* California KLEENEX Men's Briefs STRAWBERRY HERSHEY'S 1x1 rib full combed cot­ Chocolate TOWELS ton. Helanca stretch PRESERVES Asserted Colors. Ion tapes and fly. Rein­ tlMt2H.-12n.Jir Red ef 250. forced cuffs. Sizes 28 to 44 CRAYCLA HANOI CREST MAXWEll Colored WRAP Tooth Paste HOUSE Strained Crayon 1OO It. roll wrapt family Six* BABY FOODS Box of 64 lOOsandwicho*. Imtont Coffe* BIG BOY SPORTSWEAR Girls' & Misses' Sorters CharKoler Assorted styles and colors, braid site trim, rope belt with self loops. Girtf Cotton Drip Dri Dresses MOTORIZED BRAZIER 7 to 14 -Missel, 10 to ?(L Colorful prints, vivid plaids, checks and solids, includes SAVE *2.00 Big 22" Fire Bowl (5&" deep) 1 Shirtmakers, Bolero, Jumper Complete with hood rilfiter Flavor llf. 2.91 I. end other styles. Sizes 4 to i ON SQUIBB Screw Type Grill Adjustment TheragranlOO's 3 1" Tubular legs braced Capri Pants Therapeutic Formula Vita­ 2 -5^4" wheels, rubber tires 100% wash 'a wear fottot IB w* Glamour Bands min Tablets. Bottle of 100. eral styles ant) colors. Girls, 7 to Smartly styled knitted UL Approved Misses, 10 to 20.
    [Show full text]
  • A Reconsideration of Pictish Mirror and Comb Symbols Traci N
    University of Wisconsin Milwaukee UWM Digital Commons Theses and Dissertations December 2016 Gender Reflections: a Reconsideration of Pictish Mirror and Comb Symbols Traci N. Billings University of Wisconsin-Milwaukee Follow this and additional works at: https://dc.uwm.edu/etd Part of the Archaeological Anthropology Commons, European History Commons, and the Medieval History Commons Recommended Citation Billings, Traci N., "Gender Reflections: a Reconsideration of Pictish Mirror and Comb Symbols" (2016). Theses and Dissertations. 1351. https://dc.uwm.edu/etd/1351 This Thesis is brought to you for free and open access by UWM Digital Commons. It has been accepted for inclusion in Theses and Dissertations by an authorized administrator of UWM Digital Commons. For more information, please contact [email protected]. GENDER REFLECTIONS: A RECONSIDERATION OF PICTISH MIRROR AND COMB SYMBOLS by Traci N. Billings A Thesis Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Science in Anthropology at The University of Wisconsin-Milwaukee December 2016 ABSTRACT GENDER REFLECTIONS: A RECONSIDERATION OF PICTISH MIRROR AND COMB SYMBOLS by Traci N. Billings The University of Wisconsin-Milwaukee, 2016 Under the Supervision of Professor Bettina Arnold, PhD. The interpretation of prehistoric iconography is complicated by the tendency to project contemporary male/female gender dichotomies into the past. Pictish monumental stone sculpture in Scotland has been studied over the last 100 years. Traditionally, mirror and comb symbols found on some stones produced in Scotland between AD 400 and AD 900 have been interpreted as being associated exclusively with women and/or the female gender. This thesis re-examines this assumption in light of more recent work to offer a new interpretation of Pictish mirror and comb symbols and to suggest a larger context for their possible meaning.
    [Show full text]
  • Laboratory Supplies and Equipment
    Laboratory Supplies and Equipment Beakers: 9 - 12 • Beakers with Handles • Printed Square Ratio Beakers • Griffin Style Molded Beakers • Tapered PP, PMP & PTFE Beakers • Heatable PTFE Beakers Bottles: 17 - 32 • Plastic Laboratory Bottles • Rectangular & Square Bottles Heatable PTFE Beakers Page 12 • Tamper Evident Plastic Bottles • Concertina Collapsible Bottle • Plastic Dispensing Bottles NEW Straight-Side Containers • Plastic Wash Bottles PETE with White PP Closures • PTFE Bottle Pourers Page 39 Containers: 38 - 42 • Screw Cap Plastic Jars & Containers • Snap Cap Plastic Jars & Containers • Hinged Lid Plastic Containers • Dispensing Plastic Containers • Graduated Plastic Containers • Disposable Plastic Containers Cylinders: 45 - 48 • Clear Plastic Cylinder, PMP • Translucent Plastic Cylinder, PP • Short Form Plastic Cylinder, PP • Four Liter Plastic Cylinder, PP NEW Polycarbonate Graduated Bottles with PP Closures Page 21 • Certified Plastic Cylinder, PMP • Hydrometer Jar, PP • Conical Shape Plastic Cylinder, PP Disposal Boxes: 54 - 55 • Bio-bin Waste Disposal Containers • Glass Disposal Boxes • Burn-upTM Bins • Plastic Recycling Boxes • Non-Hazardous Disposal Boxes Printed Cylinders Page 47 Drying Racks: 55 - 56 • Kartell Plastic Drying Rack, High Impact PS • Dynalon Mega-Peg Plastic Drying Rack • Azlon Epoxy Coated Drying Rack • Plastic Draining Baskets • Custom Size Drying Racks Available Burn-upTM Bins Page 54 Dynalon® Labware Table of Contents and Introduction ® Dynalon Labware, a leading wholesaler of plastic lab supplies throughout
    [Show full text]
  • Capilo Institute
    catalog/handbook capilo.com Aveda Institute Maine a Capilo School Handbook Vol. 13 – 09/09/16 43 Bridge Street, Augusta ME 04330 207-621-9941 Fax 207-623-9462 1 Table of Contents Mission Statement Mission Statement/Introduction 2 To provide an education to future Career Opportunities 2 professionals in the arts and science of General Information 3 Educational Objectives 3 Cosmetology, Barbering, Esthetics and Financial Aid 3 Facility 3 Nail Technology. Our training will Admission Requirements 4 prepare our students to successfully Statement of Non-Discrimination 4 pass the state exam and help our Registration 4 Enrolment Agreement 4 graduates reach their career and life Credit for Previous Training Policy 4 Class Starting Dates 2016 5 goals through knowledge, skills and hard Constitution Day 5 work. Vaccinations 5 Physical Demands 5 US Voter Registration 5 Privacy Rights and Student Access Policy 6 This catalog is to help prospective students Student Services 6 make an informed decision regarding the Teacher Advisor Program TAP 6 Housing 6 training opportunities that Aveda Institute Maine School Closures 6 a Capilo School offers. This school Re-Entry Policy 6 catalog/handbook is designed to state the Tuition, Fees and Costs 2016 7 Clock Procedure 7 responsibilities and obligations of both the Breaks & Lunches 7 school and the student. Student Books and Kits 7 Personal Property 7 Maine State Exam 8 Materials Purchased by Students 8 Outcome Information 8 CAREER OPPORTUNITIES Exit Interview 8 Job Placement 8 If you're creative and enjoy fashion and Compensation 8 beauty, this could be a career choice for you.
    [Show full text]
  • Smart Floor Cleaning Robot
    Smart Floor Cleaning Robot (CLEAR) Uman Khalid1, Muhammad Faizan Baloch1, Haseeb Haider1, Muhammad Usman Sardar1, Muhammad Faisal Khan1,2, Abdul Basit Zia1 and Tahseen Amin Khan Qasuria1 1Faculty of Electronic Engineering, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Pakistan 2Hamdard Institute of Engineering & Technology, Hamdard University, Karachi, Pakistan [email protected], [email protected], [email protected], [email protected] [email protected], [email protected], [email protected] Abstract—With the advancement of technology, robots are the mechanical design of robotincluding chassis design, brushing, getting more attention of researchers to make life of mankind vacuum cleaning mechanism and auto-dirt disposal comfortable. This paper presents the design, development and mechanism.Electronic circuitry (including motor controllers, vacuum fabrication of prototype Smart Floor Cleaning Robot (CLEAR) cleaner controller, battery status meters and brushing motor controller using IEEE Standard 1621 (IEEE Standard for User Interface along with safety circuit for power supply to sensors, arduino Elements in Power Control of Electronic Devices employed in controller as well as precautionary circuit) is discussed in Section Office/Consumer Environments). Subject robot operates V.Graphical User Interface (GUI) of the project and robot operation inautonomous mode as well as in manual mode along with are discussed in Section VI and VII respectively. All these sections additional features like scheduling for specific time and bagless describe their relevance to the application of IEEE Standard 1621. dirt container withauto-dirt disposal mechanism. This work can Conclusions of the project are summarized in Section VIII. be very useful in improving life style of mankind.
    [Show full text]
  • Farm Products-Livestock Fencing-Parmak Electric Fence
    TOOLS Brooms-Street Broom Plastic Street Push Broom Floor Broom, Warehouse Broom, Wisk Broom BROOMS WIDE FLARE ON ENDS ALLOWS CLOSE SWEEPING TO CURBS. FOR WET OR DRY SWEEPING IN DAIRY BARNS, STREET SWEEPING, HIGHWAY WORK, ETC. STREET BROOM PALMYRA STALK STREET PUSH BROOMS. SPECIALLY TREATED PALMYRA STALK. STAPLE SET IN SMOOTH SANDED HARD-WOOD BLOCK. LENGTH OF TRIM: 6 1/4 INCHES. PACKED 6 PER CARTON. PART NO. DESCRIPTION SIZE 452-1027 BROOM (LESS HANDLE) 16" WIDE 452-1304 THREADED HANDLE 15/16" X 5' PLASTIC STREET PUSH BROOM BROWN POLYPROPYLENE PLASTIC. STAPLE SET IN SMOOTH SANDED HARDWOOD BLOCK. LENGTH OF TRIM: 5 1/2 INCHES. PACKED 6 PER CARTON. PART NO. DESCRIPTION SIZE 452-1032 BROOM (LESS HANDLE) 16" WIDE 452-1728 TAPERED HANDLE 1-1/8" X 5' FLOOR BROOM BLACK PLASTIC BRISTLES. STAPLE SET IN CLEAR LACQUERED HALF-ROUND HARDWOOD BLOCK. FOR WET OR DRY SWEEPING ROUGH OR SEMI-SMOOTH CONCRETE, WOOD, ASPHALT, ETC. LENGTH OF TRIM: 3 1/8 INCHES. PART NO. DESCRIPTION SIZE INDIVIDUALLY PACKED 452-1053 FLOOR BROOM W/ HANDLE 24" WIDE WAREHOUSE BROOM MADE OF BEST QUALITY SELECTED BROOM CORN. REINFORCED WITH COARSE FIBRE. SEWED 4 TIMES. REINFORCED WITH A WIRE BAND. MADE ON A HEAVY DUTY HANDLE. THIS BROOM WAS DESIGNED FOR T SWEEPING SMOOTH AND ROUGH SURFACES HAVING MODERATE AND OOLS HEAVY DIRT ACCUMULATIONS. PACKED 12 PER BUNDLE. PART NO. DESCRIPTION 452-1101 WAREHOUSE BROOM WISK BROOM MADE OF SELECTED FINE BROOM CORN. SEWED TWO TIMES. CADMIUM PLATED RING CAP. THIS IS BEST QUALITY WHISK BROOM FOR HOME, OFFICE AND AUTOMOBILE.
    [Show full text]
  • S2700 Mega Mixtm
    OPERATING MANUAL TM Model: S2700 Mega Mix 5 Gallon High Speed Multi Can Paint Shaker WARNING: DO NOT OPERATE THIS EQUIPMENT WITHOUT READING AND UNDERSTANDING ALL SAFETY AND OPERATING INSTRUCTIONS Part #: OM-S2700 © Copyright 2011 of ICTC Holdings Corp. Version Oct. 2013 I.C.T.C. Holdings Corporation / HERO Products Group Factory located at: 720 Eaton Way Delta, B.C. Canada V3M 6J9 TOLL FREE: (800) 494-4376 Ph: (604) 522-6543 Fax: (604) 522-8735 Email: [email protected] Web: www.hero.ca U.S.A.S2700 OPERATINGAddress: P.O. MANUAL Box 75 Custer, Washington 98240-0075 Jan 6, 2011 PRECAUTIONS AND GENERAL INFORMATION This machine is NOT EXPLOSION PROOF. Shaking or cleaning with a FLAMMABLE SUBSTANCE can cause an EXPLOSION. BE SURE TO REMOVE SHIPPING BOLTS/BRACKETS BEFORE OPERATING THE SHAKER. In the event of spillage, CONSULT PAINT CAN SPILL CLEAN UP SECTION. ALWAYS make sure the lids to any can or pail being mixed are on tight before placing them into the Shaker. When mixing multiple cans at the same time, verify that all cans are of the same height. Small variances in height may cause cans and/or the shaker to be damaged due to incomplete clamping action. ALWAYS be sure to use the rubber spacer pads (provided) on metal and plastic pails to minimize "oil canning". ALWAYS be sure to use the bail hold down strap (provided) on cans or pails with bail handles. The Shaker is designed to operate only when the door is closed. DO NOT ATTEMPT TO ALTER ELECTRI- CAL INTERLOCK MECHANISM.
    [Show full text]
  • NEW MEXICO MILITARY INSTITUTE Invitation for Bid No
    1 NMMI IFB 2020/21-07 Page 1 of 10 NEW MEXICO MILITARY INSTITUTE Invitation for Bid No. 2020/21-07 Proposals for: Kitchen Equipment MAIL SEALED PROPOSALS TO: Office of the Chief Procurement Officer New Mexico Military Institute 101 West College Blvd. Roswell, NM 88201 BID OPENING DATE: Tuesday, May 4, 2021 TIME 2:00 PM/MT (Mountain Time) At the above date and time, bids will be opened with at least one witness present. Bids will be opened publicly via Zoom. Any bid received after the stated date and time will not be considered and will be returned unopened. Note any questions are to be addressed to the Chief Procurement Officer, Cole Collins, email:[email protected] Offeror agrees to comply with all conditions that are stated in this IFB. Items to be delivered to: New Mexico Military Institute - Bates Hall – 101 West College Blvd., Roswell, NM 88201 By the signature hereon affixed, the Offeror hereby certifies that neither the Offeror nor the firm, corporation, partnership or institution represented by the Offeror, or anyone acting for such firm, corporation, or institution has violated the antitrust laws of this state, or the Federal antitrust laws, nor communicated directly or indirectly the bid made, to any competitor or any other person engaged in such line of business. OFFEROR MUST FILL IN AND SIGN: NAME OF FIRM, COMPANY ______________________________________________________ ADDRESS______________________________________________________________________________________ (Street) (City) (State) (Zip) AUTHORIZED SIGNATURE ____________________________________________________ ______________________________________________________________________ (Title) ____________________________________________ DATE _____________ TELEPHONE NO. ______________________ EIN #______________________ This requirement is assigned Commodity Code # 16507 – Cafeteria and Kitchen Equipment (Not Otherwise Classified) In submitting their bid, Offerors represent that they have examined and acknowledge receipt of addendum(s) (if any have been issued) identified below: No.
    [Show full text]
  • Beesupplies2017.Pdf
    Hive Bodies and Components Item Price 5 frame wooden nuc box $37.50 assembled nuc $37.50 Plastic Nuc Box $10.95 9-5/8'' unassembled ponderosa pine hive body $15.00 6-5/8'' unassembled pine super $11.50 5-3/4'' unassembled pine super $10.50 9-5/8'' unassembled cypress hive body $22.00 6-5/8'' unassembled cypress super $17.00 5-3/4'' unassembled cypress super $14.75 9-5/8'' assembled & painted pine hive body $26.50 6-5/8'' assembled & painted pine super $22.50 5-3/4'' assembled & painted pine super $21.50 hive stand cypress (8 & 10 frame) $19.75 cypress screened bottom board (8 & 10 frame) $25.00 cypress solid reversible bottom board (8 & 10 frame) $19.75 Unassembled cypress telescoping cover $23.00 assembled cypress telescoping cover (8 & 10 frame) $28.50 assembled painted pine telescoping cover $26.75 assembled unpainted pine telescoping cover $24.50 cypress inner cover (8 or 10 frame) $14.00 migratory flat cover $13.50 Painted Migratory Cover $15.00 Nails for Hives $3.50 25 hive staples $2.00 plastic bound queen excluder $4.85 metal bound queen excluder (8 or 10 frame) $8.25 entrance reducer (8 or 10 frame) $1.50 propolis trap $8.50 bottom pollen trap $63.40 Hive bodies and Components cont. cypress double screen $19.00 cypress top moving screen $11.00 plastic 9 frame spacer $13.95 8 frame spacer for 10 frame equipment $0.60 9 frame spacer for 10 frame equipment $0.60 deep drone frames $2.75 medium drone frames $2.75 10 frame starter kit $189.50 Observation Hive (bees not included) $899.00 Observation Hive with Bees $1,099.00 Frame Assembly
    [Show full text]
  • Museum Collections Totaled 142.1 Million
    National Collections Program Staff William G. Tompkins, National Collections Coordinator Lauri A. Swann, Assistant National Collections Coordinator Cover Photo: Smithsonian Institution Building towers from the Arts and Industries Building showing both roofs. This image first appeared in the 1931 United States National Museum Report. For additional information or copies of this report contact: National Collections Program, Arts & Industries Building, Room 3101, 900 Jefferson Drive, SW, Smithsonian Institution, Washington, DC 20560 - 0404 tel. (202) 357-3125 fax (202) 633-9214 e-mail [email protected]. 2000 Collection Statistics National Collections Program Smithsonian Institution Archives Director’s Statement I am pleased to present to the Board of Regents, the Secretary, and Smithsonian staff the annual statistical report on the collections of the Smithsonian. This report contains a wealth of information on Institutional trends in the acquisition, loan, and management of the National Collections. First published in 1987, the statistics have become an important indicator of both progress and problems in collections management, informing resource allocators and the Institution’s personnel of events occurring in a given year, and trends reflected over time. This year’s Collection Statistics marks a departure from previous years. More important, it marks the beginning of changes that will occur as the National Collections Program (NCP) of Smithsonian Institution Archives reviews the needs and wishes of its multiple audiences. In the coming year, NCP will seek to identify new and expanded methods to communicate findings on the growth, care, and use of the National Collections. This year’s change moves the publication toward increased uniformity and comparability of data.
    [Show full text]