New Holland Baler BC 5060

New Holland Agriculture balers are recognised as the most reliable and dependable in the market and with good reasons too. They have a heavy-duty draw bar, big drive lines, tough plungers, gear driven knotters and heavy duty feeding system, all designed to give you years of reliable service. New Holland balers are best compatible with New Holland tractors.

Bale Dimensions Cross Section 14x18 in. (36x46 cm) Length Adjustable,12 to 52 in. (31 to 132 cm) Super-Sweep Pickup Width inside 1.65 m Width on flare 1.80 m Number of teeth 110, on 5 Tooth Bars Floating windguard 8 rods Protection V-belt roller chain to lost motion reel drive Gauge wheel 3.00 x 12, Semi Pneumatic Type Hydraulically operated from tractor seat (standard) Feeding System Type Packer form in combination with 2 paired rotors Drive Chain from main drive shaft, sealed ball bearing on all shafts Feeder opening 1826 cm2, Plunger Stroke length 76.2 cm Speed (540 rpm) 93 spm Construction High-strength steel throughout, modified extension is built into the plunger face eliminating the need for bolt-on extension Tying Mechanism Type Heavy-duty knotter (standard) Protection Shearbolt Capacity (twine) 6 balls Capacity (wire) 4 coils Adjustable Bale Density Type Hydroformatic (standard) System Independent oil pump, pressure gauge, hydraulic pump Adjustments easy to adjust with a knob Main drive Flywheel diameter 56 cm PTO driveline Standard: 3 joint, Category 6, W/Power – Pivot bearing Protection Shearbolt, Overrunning & slip clutches Gearbox Hypoid with tapered roller bearings, heat-treated alloy steel running in oil Tyres Floating (right) 27 x 9.5-15, 6PR Floating (left) 31 x 13.50-15, 6PR Dimensions Height (max.) 178 cm Width 279 cm Length 626 cm (with 3 joint PTO & quarter-turn bale chute) Weight (approximate) With 3-joint PTO Twin Version 1542 kg Recommended transport speed 32 km/h Tractor requirement 55-75 HP Features:

• New Holland baler's heavy-duty drawbar, attached directly to the axle, keeps towing stresses away from the bale chamber. It has one transport position and two field positions for use with various tractor widths. • The large 56 cm flywheel of the New Holland baler allows smooth power transfer. • The baler's heavy-duty clutch is protected by a shear bolt arrangement. It ensures gentle load engagement, long life and greater load capacity. • The wide pick-up arrangement of the New Holland baler has multiple rows of curved teeth that can handle even a short file crop. The pick-up can be raised or lowered according to different terrain and crop density, either manually or through hydraulics. • The floating windguard of the New Holland baler gets the windrow under control and forms it into a smooth hay for positive feeding. • The baler's chain-driven pick-up incorporates a slip clutch to prevent overload. • The pick-up gauge wheel of the New Holland baler compensates for uneven field conditions as it protects pick-up teeth. • The New Holland baler's high capacity feeding system is equipped with six tines, which provide a positive feed action into the baler chamber. • The baler's large feed opening handles the big capacity pick-up and feeder. • The sturdy plunger of the New Holland baler with high speed and large stroke ensures optimum bale shape and density. A sharp blade mounted on the plunger cuts the crop evenly.