Safety Data Sheet

Total Page:16

File Type:pdf, Size:1020Kb

Safety Data Sheet SAFETY DATA SHEET Revision Date 27-Dec-2020 Revision Number 2 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product Description: Rubidium hydroxide, 50% w/w aqueous solution Cat No. : 10565 Molecular Formula HORb Unique Formula Identifier (UFI) M2DN-X6KP-8X0G-J1MV 1.2. Relevant identified uses of the substance or mixture and uses advised against Recommended Use Laboratory chemicals. Uses advised against No Information available 1.3. Details of the supplier of the safety data sheet Company Alfa Aesar . Avocado Research Chemicals, Ltd. Shore Road Port of Heysham Industrial Park Heysham, Lancashire LA3 2XY United Kingdom Office Tel: +44 (0) 1524 850506 Office Fax: +44 (0) 1524 850608 E-mail address [email protected] www.alfa.com Product Safety Department 1.4. Emergency telephone number Call Carechem 24 at +44 (0) 1865 407333 (English only); +44 (0) 1235 239670 (Multi-language) Poison Centre - Emergency Ireland : National Poisons Information Centre (NPIC) - information services 01 809 2166 (8am-10pm, 7 days a week) Malta : +356 2395 2000 Cyprus : +357 2240 5611 SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the substance or mixture CLP Classification - Regulation (EC) No 1272/2008 Physical hazards Based on available data, the classification criteria are not met ______________________________________________________________________________________________ ALFAA10565 Page 1 / 10 SAFETY DATA SHEET Rubidium hydroxide, 50% w/w aqueous solution Revision Date 27-Dec-2020 ______________________________________________________________________________________________ Health hazards Acute oral toxicity Category 4 (H302) Skin Corrosion/Irritation Category 1 B (H314) Serious Eye Damage/Eye Irritation Category 1 (H318) Environmental hazards Based on available data, the classification criteria are not met Full text of Hazard Statements: see section 16 2.2. Label elements Signal Word Danger Hazard Statements H302 - Harmful if swallowed H314 - Causes severe skin burns and eye damage Precautionary Statements P280 - Wear protective gloves/protective clothing/eye protection/face protection P301 + P330 + P331 - IF SWALLOWED: Rinse mouth. Do NOT induce vomiting P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P310 - Immediately call a POISON CENTER or doctor/physician P303 + P361 + P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower 2.3. Other hazards SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.2. Mixtures Component CAS-No EC-No. Weight % CLP Classification - Regulation (EC) No 1272/2008 Water 7732-18-5 231-791-2 50.00 - Rubidium hydroxide 1310-82-3 EEC No. 215-186-0 50.00 Skin Corr. 1B (H314) Acute Tox. 4 (H302) ______________________________________________________________________________________________ ALFAA10565 Page 2 / 10 SAFETY DATA SHEET Rubidium hydroxide, 50% w/w aqueous solution Revision Date 27-Dec-2020 ______________________________________________________________________________________________ Full text of Hazard Statements: see section 16 SECTION 4: FIRST AID MEASURES 4.1. Description of first aid measures General Advice Show this safety data sheet to the doctor in attendance. Immediate medical attention is required. Eye Contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required. Skin Contact Wash off immediately with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Call a physician immediately. Ingestion Do NOT induce vomiting. Clean mouth with water. Never give anything by mouth to an unconscious person. Call a physician immediately. Inhalation If not breathing, give artificial respiration. Remove from exposure, lie down. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Call a physician immediately. Self-Protection of the First Aider Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. 4.2. Most important symptoms and effects, both acute and delayed Causes burns by all exposure routes. Product is a corrosive material. Use of gastric lavage or emesis is contraindicated. Possible perforation of stomach or esophagus should be investigated: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation 4.3. Indication of any immediate medical attention and special treatment needed Notes to Physician Treat symptomatically. SECTION 5: FIREFIGHTING MEASURES 5.1. Extinguishing media Suitable Extinguishing Media Not combustible. CO 2, dry chemical, dry sand, alcohol-resistant foam. Extinguishing media which must not be used for safety reasons No information available. 5.2. Special hazards arising from the substance or mixture Thermal decomposition can lead to release of irritating gases and vapors. The product causes burns of eyes, skin and mucous membranes. Hazardous Combustion Products Rubidium oxide. 5.3. Advice for firefighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full ______________________________________________________________________________________________ ALFAA10565 Page 3 / 10 SAFETY DATA SHEET Rubidium hydroxide, 50% w/w aqueous solution Revision Date 27-Dec-2020 ______________________________________________________________________________________________ protective gear. Thermal decomposition can lead to release of irritating gases and vapors. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Ensure adequate ventilation. Use personal protective equipment as required. Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. 6.2. Environmental precautions Should not be released into the environment. See Section 12 for additional Ecological Information. Do not allow material to contaminate ground water system. Do not flush into surface water or sanitary sewer system. 6.3. Methods and material for containment and cleaning up Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. 6.4. Reference to other sections Refer to protective measures listed in Sections 8 and 13. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for safe handling Wear personal protective equipment/face protection. Do not get in eyes, on skin, or on clothing. Use only under a chemical fume hood. Do not breathe mist/vapors/spray. Do not ingest. If swallowed then seek immediate medical assistance. Hygiene Measures Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and after work. 7.2. Conditions for safe storage, including any incompatibilities Keep refrigerated. Corrosives area. Keep containers tightly closed in a dry, cool and well-ventilated place. Technical Rules for Hazardous Substances (TRGS) 510 Storage Class (LGK) Class 8B (Germany) 7.3. Specific end use(s) Use in laboratories SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control parameters Exposure limits List source(s): Biological limit values This product, as supplied, does not contain any hazardous materials with biological limits established by the region specific regulatory bodies ______________________________________________________________________________________________ ALFAA10565 Page 4 / 10 SAFETY DATA SHEET Rubidium hydroxide, 50% w/w aqueous solution Revision Date 27-Dec-2020 ______________________________________________________________________________________________ Monitoring methods MDHS 91 Metals and metalloids in workplace air by X-ray fluorescence spectrometry MDHS 99 Metals in air by ICP-AES Derived No Effect Level (DNEL) No information available Route of exposure Acute effects (local) Acute effects Chronic effects Chronic effects (systemic) (local) (systemic) Oral Dermal Inhalation Predicted No Effect Concentration No information available. (PNEC) 8.2. Exposure controls Engineering Measures Ensure that eyewash stations and safety showers are close to the workstation location. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source Personal protective equipment Eye Protection Goggles (European standard - EN 166) Hand Protection Protective gloves Glove material Breakthrough time Glove thickness EU standard Glove comments Natural rubber See manufacturers - EN 374 (minimum requirement) Nitrile rubber recommendations Neoprene PVC Skin and body protection Long sleeved clothing Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information) Ensure gloves are suitable for the task: Chemical compatability, Dexterity,
Recommended publications
  • Everything Chemistry Poster
    Common Polyatomic Ions by Charge and Ion Family Functional Groups +1 Charge -1 Charge -2 Charge -3 Charge H + - 2- 3- | Ammonium NH4 Dihydrogen phosphite H2PO3 Hydrogen phosphite HPO3 Phosphite PO3 R—OH Alcohol 1° H—C—R + - 2- 3- Hydronium H3O Dihydrogen phosphate H2PO4 Hydrogen phosphate HPO4 Phosphate PO4 | - 2- 3- H Hydrogen carbonate HCO Carbonate CO Hypophosphite PO 3 3 2 - 2- 3- H Ammonia NH3 Hydrogen sulfite HSO3 Sulfite SO3 Arsenite AsO3 R | - 2- 3- | Hydrogen sulfate HSO Sulfate SO Arsenate AsO Amine 2° H—C—R 4 4 4 R—N—R - 2- | Nitrite NO2 Thiosulfate S2O3 - 2- R’ Nitrate NO3 Silicate SIO3 -4 Charge H - 2- 4- Hydroxide OH Carbide C2 Pyrophosphate P2O7 | R—O—R C - 2- Ether 3° R”—C—R Acetate CH3COO Oxalate C2O4 - 2- | Chromite CrO2 Chromate CrO4 R’ - 2- Cyanide CN Dichromate Cr2O7 H R’” - 2- O Cyanate CNO Tartrate C4H4O6 || | - 2- Aldehyde 4° R”—C—R Thiocyanate CNS Molybdate MoO R—C—H 4 | E - 2- Superoxide O2 Peroxide O2 R’ - 2- Permanganate MnO Disulfide S 4 2 O R - 2- Amide n-butyl M Hypochlorite ClO Oxalate C2O4 || | - R—C—N—R R Chlorite ClO2 - Chlorate ClO3 Strong Acids and Bases O I - Carboxylic Acid iso-butyl Perchlorate ClO4 Acids Bases || R Hypobromite BrO- Hydrochloric Acid HCl Lithium Hydroxide LiOH R—C—OH S - Bromite BrO2 Hydrobromic Acid HBr Sodium Hydroxide NaOH O - Ester || sec-butyl Bromate BrO3 Hydroiodic Acid HI Potassium Hydroxide KOH R—C—O—R R Perbromate BrO - Nitric Acid HNO Rubidium Hydroxide RbOH T 4 3 - Hypoiodite IO Sulfuric Acid H2SO4 Cesium Hydroxide CsOH O - Ketone || tert-butyl Iodite IO2 Perchloric
    [Show full text]
  • Chemical List
    1 EXHIBIT 1 2 CHEMICAL CLASSIFICATION LIST 3 4 1. Pyrophoric Chemicals 5 1.1. Aluminum alkyls: R3Al, R2AlCl, RAlCl2 6 Examples: Et3Al, Et2AlCl, EtAlCl2, Me3Al, Diethylethoxyaluminium 7 1.2. Grignard Reagents: RMgX (R=alkyl, aryl, vinyl X=halogen) 8 1.3. Lithium Reagents: RLi (R = alkyls, aryls, vinyls) 9 Examples: Butyllithium, Isobutyllithium, sec-Butyllithium, tert-Butyllithium, 10 Ethyllithium, Isopropyllithium, Methyllithium, (Trimethylsilyl)methyllithium, 11 Phenyllithium, 2-Thienyllithium, Vinyllithium, Lithium acetylide ethylenediamine 12 complex, Lithium (trimethylsilyl)acetylide, Lithium phenylacetylide 13 1.4. Zinc Alkyl Reagents: RZnX, R2Zn 14 Examples: Et2Zn 15 1.5. Metal carbonyls: Lithium carbonyl, Nickel tetracarbonyl, Dicobalt octacarbonyl 16 1.6. Metal powders (finely divided): Bismuth, Calcium, Cobalt, Hafnium, Iron, 17 Magnesium, Titanium, Uranium, Zinc, Zirconium 18 1.7. Low Valent Metals: Titanium dichloride 19 1.8. Metal hydrides: Potassium Hydride, Sodium hydride, Lithium Aluminum Hydride, 20 Diethylaluminium hydride, Diisobutylaluminum hydride 21 1.9. Nonmetal hydrides: Arsine, Boranes, Diethylarsine, diethylphosphine, Germane, 22 Phosphine, phenylphosphine, Silane, Methanetellurol (CH3TeH) 23 1.10. Non-metal alkyls: R3B, R3P, R3As; Tributylphosphine, Dichloro(methyl)silane 24 1.11. Used hydrogenation catalysts: Raney nickel, Palladium, Platinum 25 1.12. Activated Copper fuel cell catalysts, e.g. Cu/ZnO/Al2O3 26 1.13. Finely Divided Sulfides: Iron Sulfides (FeS, FeS2, Fe3S4), and Potassium Sulfide 27 (K2S) 28 REFERRAL
    [Show full text]
  • The Preparation and Identification of Rubidium
    THE PREPARATION AND IDENTIFICATION OF RUBIDIUM TELLURO-MOLYBDATE AND OF CESIIDl TELLURO- MOLYBDA.TE SEP ZI 193B THE PREPARATION AlJD IDENTIFICATION or :RUBIDIUM TELLURO-MOLYBDATE AND OF CESIUM '?ELLURO-MOLYBDATE By HENRY ARTHUR CARLSON \ \ Bachelor of Science Drury College Springfield. Missouri 1936 Submitted to the Department of Chemistry Oklahoma Agricultural and Meohanica.l College In Partial Fulfillment of the Requirements For the degree of MASTER OF SCIENCE 1938 . ... ... .. .. .. ... .. ' :· ·. : : . .. .. ii S£p C"·J"··} ;.;:{ I' ' """"''· APPROVED:- \ Head~~stry 108627 iii ACKNOWLEDGMENT The author wishes to acknowledge the valuabl e advice and assistance of Dr. Sylvan R~ Wood, under whose direction this work was done. Acknowledgment is also made of the many help­ ful suggestions and cordial cooperation of Dr. H. M. Trimble. The author wishes to express his sincere appreciation to the Oklahoma Agricultural and Mechanical College for financial assistance in the fonn of a graduate assistantship in the Depart­ ment of Chemistry during the school years 1936-37 and 1937-38. iv TABLE OF CONTENTS I. Introduction------------------------------ 1 II. Materials Used-------------"--------------- 3 III. Preparation of Rubidium Telluro-molybdate---- 5 IV. Methods of Analysis------------------------ 6 Telluriur a-"---------"----------------------- 6 Molybdenum•----------------------------- 8 Rubi di um------------------"-------------... 10 \Yater of Hydration---------------------- 11 v. Calculation of: Formula---------------------- 12 VI. Preparation
    [Show full text]
  • Chemical Names and CAS Numbers Final
    Chemical Abstract Chemical Formula Chemical Name Service (CAS) Number C3H8O 1‐propanol C4H7BrO2 2‐bromobutyric acid 80‐58‐0 GeH3COOH 2‐germaacetic acid C4H10 2‐methylpropane 75‐28‐5 C3H8O 2‐propanol 67‐63‐0 C6H10O3 4‐acetylbutyric acid 448671 C4H7BrO2 4‐bromobutyric acid 2623‐87‐2 CH3CHO acetaldehyde CH3CONH2 acetamide C8H9NO2 acetaminophen 103‐90‐2 − C2H3O2 acetate ion − CH3COO acetate ion C2H4O2 acetic acid 64‐19‐7 CH3COOH acetic acid (CH3)2CO acetone CH3COCl acetyl chloride C2H2 acetylene 74‐86‐2 HCCH acetylene C9H8O4 acetylsalicylic acid 50‐78‐2 H2C(CH)CN acrylonitrile C3H7NO2 Ala C3H7NO2 alanine 56‐41‐7 NaAlSi3O3 albite AlSb aluminium antimonide 25152‐52‐7 AlAs aluminium arsenide 22831‐42‐1 AlBO2 aluminium borate 61279‐70‐7 AlBO aluminium boron oxide 12041‐48‐4 AlBr3 aluminium bromide 7727‐15‐3 AlBr3•6H2O aluminium bromide hexahydrate 2149397 AlCl4Cs aluminium caesium tetrachloride 17992‐03‐9 AlCl3 aluminium chloride (anhydrous) 7446‐70‐0 AlCl3•6H2O aluminium chloride hexahydrate 7784‐13‐6 AlClO aluminium chloride oxide 13596‐11‐7 AlB2 aluminium diboride 12041‐50‐8 AlF2 aluminium difluoride 13569‐23‐8 AlF2O aluminium difluoride oxide 38344‐66‐0 AlB12 aluminium dodecaboride 12041‐54‐2 Al2F6 aluminium fluoride 17949‐86‐9 AlF3 aluminium fluoride 7784‐18‐1 Al(CHO2)3 aluminium formate 7360‐53‐4 1 of 75 Chemical Abstract Chemical Formula Chemical Name Service (CAS) Number Al(OH)3 aluminium hydroxide 21645‐51‐2 Al2I6 aluminium iodide 18898‐35‐6 AlI3 aluminium iodide 7784‐23‐8 AlBr aluminium monobromide 22359‐97‐3 AlCl aluminium monochloride
    [Show full text]
  • UNITED STATES PATENT OFFICE 2,683,102 ELECTROLYTE for ALKALINE STORAGE BATTERIES Roger S
    Patented July 6, 1954 2,683,102 UNITED STATES PATENT OFFICE 2,683,102 ELECTROLYTE FOR ALKALINE STORAGE BATTERIES Roger S. Coolidge, New York, N. Y. No Drawing. Application March 23, 1951, Serial No. 217,291 13 Claims. (C. 136-154) 1. 2 This invention relates to a novel structure of NaOH, KOH, RbCH, CSOH, and consist in part an electrical battery and to an improved elec of increasing conductance; decreasing degree of trolyte for this battery. More in particular, the ionic hydration, ionic heat of hydration, and invention relates to a battery which functions ionic viscosity resulting in greater percentage ca successfully at sub-zero temperatures, and es 5 pacity at lower temperatures; also lowering eu pecially the invention relates to an improved al tectic freezing point; increasing activity coeffi kaline electrolyte for Such batteries for Operat cients; and other advantageous features. These ing at relatively low temperatures. increasingly advantageous qualities are also de It is well known that many of the present elec sirable for ordinary use of electrolytes in electric tric batteries which include sodium hydroxide or 10 batteries, because they provide the means for a, potassium hydroxide as one of the ingredients of more active performance and efficiency of the the electrolyte does not efficiently operate at rela battery. tively cold temperatures, and especially in sub In view of these particular advantages of the Zero temperatures. various alkali hydroxides in the order of their It is the desire of this invention to provide a magnitude, the preferred amount of rubidium battery which operates successfully at relatively or cesium hydroxide employed in this invention cold temperatures, and at any selected Sub-Zero is a complete substitution of cesium hydroxide temperature.
    [Show full text]
  • Provisional Peer-Reviewed Toxicity Values for Rubidium Compounds
    EPA/690/R-16/012F l Final 9-02-2016 Provisional Peer-Reviewed Toxicity Values for Rubidium Compounds (CASRN 7440-17-7, Rubidium) (CASRN 7791-11-9, Rubidium Chloride) (CASRN 1310-82-3, Rubidium Hydroxide) (CASRN 7790-29-6, Rubidium Iodide) Superfund Health Risk Technical Support Center National Center for Environmental Assessment Office of Research and Development U.S. Environmental Protection Agency Cincinnati, OH 45268 AUTHORS, CONTRIBUTORS, AND REVIEWERS CHEMICAL MANAGERS Puttappa R. Dodmane, BVSc&AH, MVSc, PhD National Center for Environmental Assessment, Cincinnati, OH Scott C. Wesselkamper, PhD National Center for Environmental Assessment, Cincinnati, OH DRAFT DOCUMENT PREPARED BY SRC, Inc. 7502 Round Pond Road North Syracuse, NY 13212 PRIMARY INTERNAL REVIEWER Paul G. Reinhart, PhD, DABT National Center for Environmental Assessment, Research Triangle Park, NC This document was externally peer reviewed under contract to: Eastern Research Group, Inc. 110 Hartwell Avenue Lexington, MA 02421-3136 Questions regarding the contents of this PPRTV assessment should be directed to the EPA Office of Research and Development’s National Center for Environmental Assessment, Superfund Health Risk Technical Support Center (513-569-7300). ii Rubidium Compounds TABLE OF CONTENTS COMMONLY USED ABBREVIATIONS AND ACRONYMS .................................................. iv BACKGROUND .............................................................................................................................1 DISCLAIMERS ...............................................................................................................................1
    [Show full text]
  • Fedex Ground Hazardous Materials Shipping Guide Is Intended to Simplify Title 49 CFR
    FedEx Ground Package Systems Inc. is committed to the safe transportation of hazardous materials. It is very important that each person engaged in the transportation of hazardous materials has the proper training and is thoroughly familiar with the Title 49CFR (Code of Federal Regulations) and/or USPS Publication 52. This guide is intended only to assist you in your preparation of hazardous materials shipped via FedEx Ground Package Systems Inc. It is the shipper’s responsibility to ensure each hazardous material package is in compliance with applicable Department of Transportation (D.O.T.) regulations and FedEx Ground Package Systems Inc. requirements. Failure to comply with these regulations and requirements may subject the shipper and carrier to fines and penalties. Improperly prepared hazmat packages or documentation may be subject to an additional charge(s) due to the unexpected hanlding associated with these shipments. Due to the changing nature of D.O.T. regulations and other information, it is impossible to guarantee absolute accuracy of the material contained in this guide. FedEx Ground Package Systems Inc., therefore, cannot assume any responsibility for omissions, errors, misprinting, or ambiguity contained within this guide and shall not be held liable in any degree for any loss or injury caused by such omission or error presented in this publication. Shippers should consult the most current version of the hazardous material regulations. Training is mandatory for those shipping hazardous materials, including limited quantity and other exceptions. The www.shipsafeshipsmart.com battery and hazmat training programs offer shippers an economical source of basic ground battery and/or hazardous materials shipping as well as addressing FedEx Ground specific issues.
    [Show full text]
  • Chemical Compatibility Storage Codes1
    CHEMICAL COMPATIBILITY STORAGE CODES1 Storage Group A: Compatible Organic Bases Identifier Name 100‐46‐9 Benzylamine 100‐85‐6 Benzyltrimethylammonium hydroxide 108‐91‐8 Cyclohexylamine 111‐42‐2 Diethanolamine 109‐89‐7 Diethylamine 75‐04‐7 Ethylamine 107‐15‐3 Ethylenediamine 110‐89‐4 Piperidine 102‐71‐6 Triethanolamine 121‐44‐8 Triethylamine Storage Group B: Compatible Pyrophoric And Water Reactive Materials Identifier Name 7783‐70‐2 Antimony pentafluoride 98‐88‐4 Benzoyl chloride 353‐42‐4 Boron triflouride compound with methyl ether (1:1) 594‐19‐4 Tert‐Butyllithium 156‐62‐7 Calcium cyanamide 16853‐85‐3 Lithium aluminum hydride 4111‐54‐0 Lithium diisopropylamide 7580‐67‐8 Lithium hydride 7439‐93‐2 Lithium metal (e.g., in THF) 124‐63‐0 Methanesulfonyl chloride 917‐54‐4 Methyllithium solution (and other alkyls) 7440‐09‐7 Potassium metal 17242‐52‐3 Potassium amide 16940‐66‐2 Sodium borohydride 7646‐69‐7 Sodium hydride 7440‐66‐6 Zinc (fume or dust) Storage Group C: Compatible Inorganic Bases Identifier Name 1336‐21‐6 Ammonium hydroxide 17194‐00‐2 Barium hydroxide 1305‐62‐0 Calcium hydroxide 21351‐79‐1 Cesium hydroxide 1310‐65‐2 Lithium hydroxide 1 Adapted from Stanford University’s ChemTracker Storage System. Used with permission from Lawrence M. Gibbs, Stanford University. 1310‐58‐3 Potassium hydroxide 1310‐82‐3 Rubidium hydroxide 1310‐73‐2 Sodium hydroxide 18480‐07‐4 Strontium hydroxide Storage Group D: Compatible Organic Acids Identifier Name 64‐19‐7 Acetic acid 79‐10‐7 Acrylic acid 65‐85‐0 Benzoic acid 98‐07‐7 Benzotrichloride 98‐88‐4
    [Show full text]
  • United States Patent Office Patented Sept
    2,852,363 United States Patent Office Patented Sept. 16, 1958 2 The fact that the above reactions do proceed as written has been confirmed by experimentation. However, these 2,852,363 reactions require a much higher temperature than was indicated by our previous experiments and calculations. PREPARATION OF ALKALIMETALS Comparable reactions occur when the oxides of rubidi Roy M. Adams, Darlington, and Stuart G. McGriff, Gib um and cesium are used. sonia, Pa., assignors to Callery Chemical Company, In carrying out the reaction disclosed, separation of the Pittsburgh, Pa., a corporation of Pennsylvania. alkali metal is accomplished by boiling the metal out of the reaction mixture. Thus, a reaction temperature No Drawing. Application October 20, 1955 10 above the boiling point of the alkali metal is preferred. Serial No. 541,859 To prepare potassium the reaction temperature should 6 Claims. (CI. 75-66) be about 800° C. at atmospheric pressure to permit sep aration of the potassium from the zinc by distillation and to improve the reaction kinetics. Since cesium and This invention relates to a new and improved method 15 rubidium boil at 670° C. and 700° C. at atmospheric for the preparation of certain alkali metals and in par pressure, respectively, the reaction temperature for the ticular it relates to a new and improved method for pre preparation of these metals can be somewhat lower than paring potassium, rubidium and cesium by the reaction that required to prepare potassium. The reaction will of an alkali metal oxide with zinc. take place at lower temperatures if vacuum is used to In general, the alkali metals can be made by the elec 20 remove the metal from the reaction zone.
    [Show full text]
  • Department of Transportation Pipeline and Hazardous Materials Safety Administration
    Thursday, August 31, 2006 Part II Department of Transportation Pipeline and Hazardous Materials Safety Administration 49 CFR Parts 171, 172, 173, et al. Hazardous Materials: Harmonization With the United Nations Recommendations, International Maritime Dangerous Goods Code, and International Civil Aviation Organization’s Technical Instructions; Proposed Rule VerDate Aug<31>2005 15:31 Aug 30, 2006 Jkt 208001 PO 00000 Frm 00001 Fmt 4717 Sfmt 4717 E:\FR\FM\31AUP2.SGM 31AUP2 erjones on PROD1PC72 with PROPOSALS2 51894 Federal Register / Vol. 71, No. 169 / Thursday, August 31, 2006 / Proposed Rules DEPARTMENT OF TRANSPORTATION number or Regulatory Identification HM–215A, 59 FR 67390; HM–215B, 62 Number (RIN) for this notice. For FR 24690; HM–215C, 64 FR 10742; HM– Pipeline and Hazardous Materials detailed instructions on submitting 215D, 66 FR 33316; HM–215E, 68 FR Safety Administration comments and additional information 44992; and HM–215G, 69 FR 76044). on the rulemaking process, see the The rules provided additional 49 CFR Parts 171, 172, 173, 175, 176, Public Participation heading of the harmonization with international 178 and 180 Supplementary Information section of transportation requirements by more [Docket No. PHMSA–06–25476 (HM–215I)] this document. Note that all comments fully aligning the HMR with the received will be posted, without change, corresponding biennial updates of the RIN 2137–AE16 to http://dms.dot.gov including any UN Recommendations, the IMDG Code personal information provided. Please and the ICAO Technical Instructions. Hazardous Materials: Harmonization With the United Nations see the Privacy Act heading under The UN Recommendations are not Recommendations, International Regulatory Analyses and Notices.
    [Show full text]
  • Corrosive Chemicals
    Corrosive Chemicals Chemical Name/Description Class CAS Number Acetic acid solution, not less than 50 percent but 8 64-19-7 not more than 80 percent acid, by mass Acetic acid solution, with more than 10 percent 8 64-19-7 and less than 50 percent acid, by mass Acetic acid, glacial or Acetic acid solution, with 8 64-19-7 more than 80 percent acid, by mass Acetic anhydride 8 108-24-7 Acetyl bromide 8 506-96-7 Acetyl iodide 8 507-02-8 Acrylic acid, stabilized 8 79-10-7 Alkyl sulfonic acids, liquid or Aryl sulfonic acids, liquid with more than 5 percent free 8 42615-29-2 sulfuric acid Alkyl sulfonic acids, liquid or Aryl sulfonic acids, liquid with not more than 5 percent free 8 42615-29-2 sulfuric acid Alkyl sulfonic acids, solid or Aryl sulfonic acids, solid with not more than 5 percent free 8 42615-29-2 sulfuric acid Alkyl sulfonic acids, solid or Aryl sulfonic acids, solid, with more than 5 percent free 8 42615-29-2 sulfuric acid Alkylphenols, liquid, n.o.s. (including C2-C12 8 99-89-8 homologues) Alkylphenols, solid, n.o.s. (including C2-C12 8 99-89-8 homologues) Alkylsulfuric acids 8 540-82-9 Allyltrichlorosilane, stabilized 8 107-37-9 Aluminum bromide, anhydrous 8 7727-15-3 Aluminum bromide, solution 8 7727-15-3 Aluminum chloride, anhydrous 8 7446-70-0 Aluminum chloride, solution 8 7784-13-6 Amines, liquid, corrosive, flammable, n.o.s. or 8 Polyamines, liquid, corrosive, flammable, n.o.s.
    [Show full text]
  • Salt Formation
    Salt formation FeBr3 Iron (III) bromide Fe(3+) + Br(-) => FeBr3 Fe3Br1 Some acids Formula Name HF hydrofluoric acid HCl hydrochloric acid HBr hydrobromic acid HI hydroiodic acid HNO3 nitric acid HNO2 nitrous acid H2SO4 sulfuric acid H2SO3 Sulfurous acid Some acids and their anions z Acid Anion Name HF F- fluoride anion HCl Cl- chloride anion HBr Br- bromide anion HII- iodide anion - HNO3 NO3 nitrate anion - HNO2 NO2 nitrite anion 2- H2SO4 SO4 sulfate anion 2- H2SO3 SO3 Sulfite anion Naming salts of acids z Higher oxidation state is named (stem)ic acid. z Lower oxidation state is named (stem)ous acid z Salts are named based on the acids. • Anions of -ic acids make “ate” salts. • Anions of -ous acids make “ite” salts. acid salt ic ate ous ite Some acids Formula Name HCN hydrocyanic acid H3PO4 phosphoric acid H2CO3 carbonic acid CH3COOH acetic acid Some acids and their anions z Acid Anion Name HCN CN- cyanide anion 3- H3PO4 PO4 phosphate anion 2- H2CO3 CO3 carbonate anion - CH3COOH CH3COO acetate anion Common bases Formula Name LiOH lithium hydroxide NaOH sodium hydroxide KOH potassium hydroxide RbOH rubidium hydroxide CsOH cesium hydroxide Ca(OH)2 calcium hydroxide Sr(OH)2 strontium hydroxide Ba(OH)2 barium hydroxide More bases z Formula Name Cu(OH)2 copper (II) hydroxide Fe(OH)2 iron (II) hydroxide Fe(OH)3 iron (III) hydroxide Zn(OH)2 zinc (II) hydroxide Mg(OH)2 magnesium (II) hydroxide Naming some oxides Formula Name z CO carbon monoxide z CO2 carbon dioxide z SO3 sulfur trioxide Naming some inorganic compounds Cation named first Anion
    [Show full text]