DOCSLIB.ORG

Department of Yarn Manufacturing Theses

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Department of Yarn Manufacturing Theses Theses (BS Program: NTU) Department of Yarn Manufacturing Accession No. Author Title Year Study of working conditions of Kohinoor textile mills (unit # SPI 001 Shahid Iqbal 03) Faisalabad 1990 Study of working conditions at crescent textile mills (unit# SPI 002 Tariq Nazir 03), Faisalabad 1989 " Thorough study of working conditions of unit no5 of SPI 003 Tahir Mehmood 1989 Nishat textile mills, Faisalabad Muhammad Iqbal A study of working conditions at the Crescent textile mills SPI 004 1991 Khan unit # 01, Faisalabad A study of working conditions at the Zainab Textile Mills, SPI 005 Nadeem Shahzad 1993 (Unit # 02),Faisalabad A study of working conditions at the Crescent textile mills SPI 006 Muhammad Ayub 1994 (unit # 03) , Faisalabad A study of working conditions for preparation of running Kolachi Ghulam SPI 007 count 36's pc yarn from national & natural fibers at the AA 1994 Qadir A Baloch Textile mills Ltd, Faisalabad Unit #02 Study of working conditions at Kohinoor textile mills (unit# SPI 008 M Akmal Riaz 1990 01), Faisalabad Study of working conditions at Kohinoor textile mills Unit # SPI 009 Muhammad Anwar 1994 023 , Faisalabad Study of working conditions in Unit # 02 Kohinoor textile SPI 010 Irfan Hanif 1994 mills , Faisalabad Study of working conditioning and spin plant at Nishat SPI 011 Malik Asadullah 1994 Textile mills Ltd, Unit # 05, Faisalabad Study of working conditioning of 20 ss carded yarn at SPI 012 Badar-Us- Samee 1994 Nishat Textile Mills, Unit # 03 , Faisalabd A study of working conditions at Nishat textile mills unit # SPI 013 Kh Nisar Ahmed 1991 03, Faisalabad Study of Unit # 04, Nishat Textile mills for the preparation SPI 014 Najam Riaz 1992 of 30's carded yarn Muhammad Waqar Study of working conditions at Nishat textile mills (unit # SPI 015 1992 Niamat 03), Faisalabad for 20s carded yarn A study of working conditions at Nishat textile mills (unit# SPI 016 Adnan Aslam 1997 03), Faisalabad Study of working conditions at Ibrahim textile mills ltd, unit SPI 017 M Saddique Wazir 1997 # 02, Faisalabad for manufacturing 65 's pv (80 : 20) Study of running count at Kohinoor textile mills, Faisalabad SPI 018 S Arif Hussain 1993 unit # 01 Study of working conditions for the preparation of 20s SPI 019 Amir Hassan Khan cotton carded yarn in unit # 6 at the crescent textile mills 1997 ltd, Faisalabad A study of working conditions at the Kohi-Noor Textile SPI 020 Muhammad Naeem 1997 Industries (Unit # 02) Faisalabad Study of working conditions for 20s combed yarn at Nishat SPI 021 Faraz Nadeem 1998 textile mills, unit # 04, Faisalabad Study of working conditions for 40s combed yarn at Nishat SPI 022 Awais Bashir 1994 Textile Mills (Unit # 04) Faisalabad Ghulam Hyder SPI 023 Study of 66s PV yarn at The Zainab Textile Mills Ltd 1997 Bhangar SPI 024 Kashif Irshad Study of PV-34s yarn at Ibrahim Textile mills Unit #01 1998 M Rizwan Saleem A study of working conditions for the preparation of 36s PC SPI 025 1998 Sheikh yarn at the A A Textile Mills Ltd, Faisalabad Ahmad Siddique Study of working conditions for the processing of 30$ pc SPI 026 1995 Bhatti yarn in Z T M Unit # 02 Zulfiqar Ali A study of working conditions for the preparation of 36s pc SPI 027 1995 Chaudhary yarn at the A A Textile Ltd, Faisalabad unit # 02 Study of 30s carded cotton yarn in unit # 04 at the Crescent SPI 028 M Shoaib Allam Ch 1994 Textile Mills Ltd, Study of working condition for 20s carded at yarn SPI 029 Muhammad Hanif 2003 manufacturing lab of National Textile University, Faisalabad SPI 030 Tahir Mehmood 2003 Study of 20s combed hosiery cotton yarn at Nishat Textile SPI 031 Barkaat Ali Mills Unit # 07 2003 Cotton changing for 52's cm count at Crescent textile mills, SPI 032 Zahid Gujjar Faisalabad unit # 05 2003 Study of working conditions for 18s combed hosiery yarn at SPI 033 Muhammad Umar Masood Textile mills Ltd, Faisalabad 2004 Study of 40s combed warp cotton yarn at Amtex spinning SPI 034 Imran Maroof Mills 2004 Muhammad Arif A study of working conditions for the preparation of 40s pc SPI 035 Razaq combed yarn 2004 Study of 40s carded yarn at unit 3 2 J K Fibers Ltd, SPI 036 Muhammad Anees Faisalabad 2003 1 Study of working conditions of running at Nishat Textile SPI 037 Rabia Murriam Mills unit # 1, Faisalabd 2004 Study of 16s carded yarn in Nishat Textile Mills no 7 SPI 038 Shahid Hussain Faisalabad 2004 Study of working conditions of 161 carded yarn at Nishat SPI 039 Javed Iqbal mills Faisalabad unit no 3 2005 A study of combed compact 40s yarn and comparison between compact and conventional yarn at the unit no5 SPI 040 Ayesha Arshad Crestex Faisalabad 2005 Muhammad Bilal Study of 40s combed and compact yarn at ms Shamas SPI 041 Khan textile Shahkot 2005 SPI 042 Sikandar Riaz Study of 501 cm hosiery yarn in JK fibers unit no2 2005 Study of 40s pc combed yarn at Ibrahim textile mills limited SPI 043 Asif Husain (tp-2) 2005 Study of 80s carded yarn at the unit # 5 Kohinoor Industries SPI 044 Aqeel Hussain Limited, Faisalabad 2006 A study of working conditions for the preparation of 201 SPI 045 Zubair Abdul Khaliq carded yarn at Best Export (Pvt) Ltd, Faisalabad 2006 Study of spinning process of 30s PC combed yarn at A A SPI 046 Naeem Aslam Spinning Mills Ltd, Khurrianwala, Faisalabad 2006 A study of process and working conditions for the preparation of combed, compact 401 yarn at the Crestex SPI 047 Zahoor-ul-Haq unit # 5, Faisalabad 2006 Study of combed hosier yarn in Nishat Textile Mills unit # SPI 048 M Arif Mukhtar 07 2006 Study of preparation of 40's combed yarn at Ittehad Textile SPI 049 M Habib-Ur-Rehman Mills, Khurrianwala 2006 SPI 050 Umair Khalid Study of 201 cotton combed yarn at MIMA Cotton Mills Ltd 2006 SPI 051 Aamir Masood Study of 401 combed yarn at JK Spinning Mills Khurianwala 2007 SPI 052 Abeer Sharif Study of 201 carded in Nishat Spinning Mill, unit # 3 2007 SPI 053 Abrar-ul-Haq Study of 401 CVC Bilal Textile Mills 2007 The study of 30s PC 52 : 48 hosiery yarn in Amtex Spinning SPI 054 M Rehan Asghar Mills 2007 A study of spinning process of 20s carded hosiery yarn at the Zahid Gee Textile Mills Ltd 32 km Sheikhupura road SPI 055 Sami Ullah Faisalabad 2007 A study of process and working conditions for the preparation of 80s carded yarn at Kohinoor Textile Mills Ltd SPI 056 Rameez Afzal unit no 5 Faisalabad 2007 Study the effect of different hank roving on quality of 36s SPI 057 Asif Ramzan PC combed at A A Spinning Mills Ltd, Khurrianwala 2007 Study of spinning process of 36s PC combed yarn at A A SPI 058 Asif Ramzan Spinning Mills Ltd, Khurrianwala 2007 A study of carded 40,s cotton yarn at the unit # 3 Crestex SPI 059 M Usman Faisalabad 2007 Study of preparation 211 carded yarn at Best Exports (Pvt) SPI 060 Ather Nadeem Ltd, Fsd 2007 Study of spinning process of 20s carded hosiery yarn at SPI 061 Hafiz Qaiser Mima Cotton Mills Ltd 2007 Research & case study Nishat Textile Mills Ltd unit no 3 SPI 062 Fakhar Zaman Shah Faisalabad 2008 Study of effect of different lap weights on properties of Malik Muhammad card sliver and study of spinning processes of 401 combed SPI 063 Asif Raza yarn at MIMA Cotton Mills, Faisalabad 2008 Muhammad Zahid Project & case study Amtex Spinning Mills (Pvt) Ltd, SPI 064 Bashir Khurrianwala 2008 Study of energy management & audit and study of spinning Muhammad processes of 201 combed yarn at Nishat Textile Mills unit # SPI 065 Shafique 7 Fsd 2008 SPI 066 M Jawad Anwar Project & case study Crescent Textile Mills Ltd, Faisalabad 2008 Study of spinning process of 20th PC combed yarn at A A SPI 067 Muhammad Azeem Spinning Mills Ltd, 20th Km Sheikhupura road, Faisalabad 2008 Study of energy management & audit and case study of Malik Waqas Ali 211 carded yarn production at Best Exports Pvt Ldt, SPI 068 Awan Faisalabad 2008 Research project & case study JK Spinning Mills Ltd SPI 069 Jawad Ali Sheikhupura road Faisalabad 2008 Executive summary of study of spinning process of 16s SPI 070 Aamer Abbas Khan carded yarn at best exports pvt, ltd faisalabad : 2009 SPI 071 Aamer Abbas Khan Study of spinning process of 16s carded yarn : 2009 SPI 072 Atif Mahmood Effect of break draft on yarn evenness on ring frame 2009 Study of spinning process of 40s combed yarn at JK SPI 073 Atif Mahmood spinning mills faisalabad 2009 SPI 074 Faiq Sattar Study of effect of twist on yarn contraction percentage : 2009 SPI 075 Faiq Sattar A case study of spinning process of ne 30 cvc yarn : 2009 Manufacturing of 10's yarn on autocoro at different twist SPI 076 Ehsan ul Haq levels 2009 Study of spinning process of 16s carded yarn at nishat SPI 077 Ehsan ul Haq textile mills ltd unit no3 faisalabad 2009 A research project on maintaining cleaning efficiency of a blow room at three different levels ie 50%, 55%, 60% at SPI 078 Sadat Khan national textile university's lab, faisalabad 2009 A case study of manufacturing of ne 201 combed hosiery SPI 079 Sadat Khan yarn at arshad textile mills faisalabad 2009 Research project on control of cleaning efficiency of card SPI 080 Abdur Rehman with optimal fiber parameters : 2009 SPI 081 Abdur Rehman Study of spinning process of 24s pc (52:48) carded yarn : 2009 Executive summary of study of spinning process of 201 cm hosiery yarn & research project study of effect of different break draft on draw frame silver's evenness at total draft SPI 082 Murad Ali level 8,9,10 2009 SPI 083 Murad Ali Study of spinning process of 201 cm hosiery yarn : 2009 Muhammad Qaisar Effect of break draft on roving evenness at different total SPI 084 Abbas draft levels 2009 Muhammad Qaisar Study
Load more

Recommended publications
  • Heat Setting, Yarn Cone, Cotton Yarn, Unevenness, Yarn Strength
    Frontiers in Science 2017, 7(3): 46-49 DOI: 10.5923/j.fs.20170703.03 Effect of Heat Setting Conditions on the Quality of Yarn Md. Rokonuzzaman, Md. Abdullah Al Mamun, A. K. M. Ayatullah Hosne Asif* Department of Textile Engineering, Mawlana Bhashani Science and Technology University, Tangail, Bangladesh Abstract In order to study the effects of heat setting conditions on the properties of 100% cotton yarn, 30/1 Ne combed ring yarn cones were heat setting in a XORELLA CONTEXXOR (yarn conditioning and steaming system). The quality parameters such as unevenness (Um% and CVm%), imperfections/km (thick places/km, thin places/km and neps/km), yarn hairiness, yarn strength (count strength product), moisture% and yarn cone weight were measured before heat setting and after heat setting (after 2 hours, 8 hours, 16 hours and 24 hours of heat setting) by using Uster evenness tester, yarn strength tester, moisture regain tester and electronics balance. Yarn quality was deteriorated after 2 hours, 8 hours, 16 hours and 24 hours of heat setting compared to before heat setting yarn. But count strength product, moisture% and yarn cone weight was found satisfactory level after 2 hours, 8 hours, 16 hours and 24 hours of heat setting compared to before heat setting yarn. As a result finished yarn should be delivered to the knitting and woven industry after 8 hours of heat setting due to better yarn quality. Keywords Heat setting, Yarn cone, Cotton yarn, Unevenness, Yarn strength Kinking and snarling during the unwinding process lead to 1. Introduction yarn breaks and loss of quality.
    [Show full text]
  • Textile Technology
    Textile Technology DIPLOMA STANDARD UNIT I General Study of Textile fibres - Desirable properties for an ideal textile fibre - classification of fibres - vegetable fibres - cotton, jute, flax - animal fibres - wool and silk - regenerated fibres - viscose rayon, polynosic rayon, acetate rayon - synthetic fibres - polyster, nylon, acrylic fibres - physical and chemical properties and uses of textile fibres - identification of textile fibres. UNIT II Yarn formation - ginning and mixing - modern opening and cleaning machiens in blowroom - scutchers and lap formers - chute feeding system - objects, principles and working of carding, drawing,combing, speed frame, ring spinning and doubling machines - salient features of modern high production cards , draw frames, speed frames, comber preparatory machines and combers, ring frames and doubling frames - yarn conditioning, reeling, bundling and baling - waste shinning and open end spinning calculations of speed, draft, hank, production and effieiency of machineries in spinning mill - maintenance of machineries in spinning mill. UNIT III Fabric formation: objects, principles and working of weaving preparatory machines - salient features of modern warp winding, weft winding, warping, sizing and drawing - in and denting mechines. sizing ingredients and preparation of recipe for cotton, synthetic and blends - primary motions, secondary motions and auxiliary motion in a plain loom - principles and working of Drop box, Jacquard and Terry motions - principles and working of modern automatic looms and shuttleless
    [Show full text]
  • Textile Engineering Bachelor of Engineering Program 2020
    Curriculum for Textile Engineering Bachelor of Engineering Program 2020 Pakistan Engineering Council & Higher Education Commission Islamabad CURRICULUM OF TEXTILE ENGINEERING Bachelor of Engineering Program 2020 Pakistan Engineering Council & Higher Education Commission Islamabad Curriculum of Textile Engineering Contents PREFACE ................................................................................................................ iii 1. Engineering Curriculum Review & Development Committee (ECRDC) ......... 1 2. ECRDC Agenda ................................................................................................ 2 3. OBE-Based Curriculum Development Framework .......................................... 3 4. PDCA Approach to Curriculum Design and Development .............................. 4 5. ECRDC for Chemical, Polymer, Textile and Allied Engineering ..................... 5 5.1 Sub Group Textile Engineering ................................................................ 9 6. Agenda of ECRDC for Chemical, Polymer, Textile and Allied Engineering Disciplines ...................................................................................................... 10 7. Program Educational Objectives (PEOs) and Learning Outcomes (PLOs) .... 12 7.1 Program Educational Objectives (PEOs) ............................................... 12 7.2 Program Learning Outcomes (PLOs) ..................................................... 12 8. Program Salient Features ...............................................................................
    [Show full text]
  • DKTE Society's TEXTILE & ENGINEERING INSTITUTE B. Tech
    DKTE Society’s TEXTILE & ENGINEERING INSTITUTE Rajwada, Ichalkaranji 416115 (An Autonomous Institute) DEPARTMENT: TEXTILES CURRICULUM B. Tech. Man Made Textile Technology Program Second Year With Effect From 2017 - 2018 B. Tech. Man Made Textile Technology - 2017 Second Year B. Tech. Man Made Textile Technology Semester-I Teaching Scheme Sr. Course Name of the Course Group Theory Practical Credits No. Code DrawingHrs/ Hrs/ Hrs/ Total Week Week Week 1 TML201 THERMAL ENGINEERING B 3 3 3 2 TML202 TEXTILE MATHEMATICS-III A 3 3 3 3 TML203 POLYMER SCIENCE B 3 3 3 4 TML204 MANMADE FIBRE MFG.-I D 3 3 3 MANMADE STAPLE YARN 5 TML205 D 3 3 3 MFG.-III MANMADE FABRIC FORMING 6 TML206 D 3 3 3 TECH- III 7 TMP207 MANMADE FIBRE MFG.-I LAB D 2 2 1 MANMADE STAPLE YARN 8 TTMP208 D 2 2 1 MFG.-III LAB MANMADE FABRIC FORMING 9 TMP209 D 2 2 1 TECH- III LAB TEXTILE DESIGN AND 10 TMP210 D 2 2 2 COLOUR LAB 11 TML211 ENVIRONMENTAL STUDIES-I L 2 2 2 Units Total 20 2 6 28 23 Group Details A: Basic Science B: Engineering Science C: Humanities Social Science & Management D: Professional Courses & Professional Elective E: Free Elective F Seminar/Training/ Project D.K.T.E. Society’s Textile and Engineering Institute, Ichalkaranji. Page 2 B. Tech. Man Made Textile Technology - 2017 Second Year B. Tech. TML201: THERMAL ENGINEERING Teaching Scheme Evaluation Scheme Lectures 3 Hrs. /Week SE-I 25 Total Credits 3 SE-II 25 SEE 50 Total 100 Course Objectives 1.
    [Show full text]
  • The Effects of Heat-Setting on the Properties of Polyester/Viscose
    Sıbel Sardag, Ozcan Ozdemır, The Effects of Heat-Setting *Ismaıl Kara on the Properties of Polyester/Viscose Department of Textile Engineering, Uludag University, Blended Yarns Görükle, Bursa 16059, Turkey E-mail: [email protected] Abstract 30 tex and 20 tex yarn bobbins consisting of 67% PES - 33% viscose were subjected to heat- *Can Textile, setting at 90 °C & 110 °C, and under a pressure of 630 mmHg in order to investigate the Corlu, Tekirdag, Turkey effects of heat-setting conditions on the properties of twisted yarns. Both heat-set and unset yarns were dyed. The tensile strength properties (tenacity and elongation at break) of each yarns were measured before heat-setting, after heat-setting and after dyeing. The inner, middle and outer sections of the yarn bobbins were measured with a spectrophotometer to find differences in color. As a result, heat-setting and dyeing processes were found to be effective in the tenacity and elasticity of yarns. Key words: heat setting, twist setting, twisting, temperature, polyester (PES), viscose, tenacity, work of rupture. ventional systems and operate under ral qualities, brightness and comfortable vacuum with saturated steam are used wearing property of viskose fiber. In ad- in conditioning and heat-setting. With dition, viscose fiber has a high elasticity the aid of steaming in these systems, when compared with cotton fibres. When yarns are conditioned or heat-set with used together with PES fibers, viscose saturated steam under vacuum [3]. fiber gives a more hormonious blend as regards elongation at break [8]. The Heat-setting process, a treatment n Introduction with steam under vacuum, improves Since the tenacity of the wet cotton yarn efficiency and quality in weaving and is higher than that of dry ones, cotton Moisture in the atmosphere has a great knitting plants by reducing yarn ten- yarns have a higher tenacity under high impact on the physical properties of tex- sion, softening yarns, moisturising them moisture [9].
    [Show full text]
  • Experience with Superior Energy Performance Implementation Projects
    Energy Efficiency Technologies and Comparing the Energy Intensity in the Textile Industry Ali Hasanbeigi, Lawrence Berkeley National Laboratory Abdollah Hasanabadi, Isfahan University of Technology Mohamad Abdorrazaghi, Amirkabir University of Technology (Tehran Polytechnic) ABSTRACT The textile industry is a complicated manufacturing industry because it is a fragmented and heterogeneous sector dominated by small and medium enterprises (SMEs). Energy is one of the main cost factors in the textile industry. In this study, thirteen textile plants from five major sub-sectors of the textile industry in Iran, i.e. spinning, weaving, wet- processing, worsted fabric manufacturing, and carpet manufacturing, were visited. The energy intensity of each plant was calculated and compared against other plants within the same sub-sector. The results showed the range of energy intensities for plants in each sub- sector. It also showed that energy saving/management efforts should be focused on motor- driven systems in spinning plants, whereas in other textile sub-sectors thermal energy is the dominant type of energy used and should be focused on. For conducting a fair and proper comparison/ benchmarking studies, factors that significantly influence the energy intensity across plants within each textile sub-sector (explanatory variables) are explained. Finally, a list of energy efficiency improvement measures observed during this study are presented. Introduction Although being an important industry sector with significant energy consumption, there are not many scientific papers published to address the energy issues in the textile industry, especially when compared to the energy-intensive industries. Ozturk (2005) reports on energy use and energy cost in the Turkish textile industry based on conducted surveys.
    [Show full text]
  • Energy-Efficiency Improvement Opportunities for the Textile Industry
    LBNL-3970E ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY Energy-Efficiency Improvement Opportunities for the Textile Industry Ali Hasanbeigi China Energy Group Energy Analysis Department Environmental Energy Technologies Division September 2010 This work was supported by the China Sustainable Energy Program of the Energy Foundation through the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. The U.S. Government retains, and the publisher, by accepting the article for publication, acknowledges, that the U.S. Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for U.S. Government purposes. Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by its trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or The Regents of the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof, or The Regents of the University of California.
    [Show full text]
  • 'United' States
    Patented 7, I ‘2,199,989 ‘UNITED’ STATES PATENT orrlca ' " 2.19am YARN CONDITIONING PROCESS AND‘ COMPOSITION THEREFOR Joseph B. Dickey and James G. McNally, Roch ester, N. Y., assignors to Eastman Kodak Com ' pany, Rochester, N; Y., a corporation of New ' Jersey No Drawing.‘ Application December 17, 1938,‘ I Serial No. 246,522 ‘ I . ‘7 Claims. (Cl. 28-1) _ This invention relates to the conditioning of to such yarns. A still further object is to" pro textile yarns and more particularly to the con vide yarn softening and lubricating formulas ditioning of ?laments and yarns composed of which can be readily removed vfrom the yarns organic derivatives of cellulose such asv cellulose by the usual scour baths. A still further object in acetate, cellulose propionate, cellulose acetate is to provide an improved method for the con propionate, and cellulose acetate butyrate, to ren ditioning of yarns, particularly those composed der them more amenable to textile operations of or containing organic derivatives of cellulose such as knitting and the like. a ‘such as cellulose acetate, whereby the yarn is , As is well known in the manufacture of yarns, rendered softand pliable and capable of employ 10 particularly those composed of or containing cel ment, in a variety of textile operations where lulose organic derivatives, it is necessary to treat _ complicated designs or stitches are employed. v the yarn in order to reduce the tendency toward Another object “is to provide an improved type breakage of the individual ?laments or "?bers of yarn which is especially amenable to textile when they are subjected to various mechanical operations including circular knitting, weaving, 15 strains and to lubricate the yarn in order to fa ‘spinning the manufacture of cut staple ?berand cilitate handling in such' operations as spinning, the like.
    [Show full text]
  • Rahdhakrishnaiah Parachuru (Krishna)
    RADHAKRISHNAIAH PARACHURU (KRISHNA) Principal Research Scientist/Senior Academic Professional School of Materials Science and Engineering [email protected]; 404-894-0029 I. EARNED DEGREES MS - Decision Sciences with a major in Applied Statistics, Georgia State University, Atlanta, GA 1993-95. PhD - Textile Engineering, Indian Institute of Technology, New Delhi, India, 1976-80. MS - Textile Technology, University of Madras, India, 1973-75. BS - Textile Technology, University of Madras, India, 1968-73. II. EMPLOYMENT HISTORY 12/88 - 11/94 Research Scientist - I 11/94 - 07/02 Research Scientist - II 07/02 - 09/11 Senior Research Scientist 09/11 - 11/10 Principal Research Scientist 11/10 - Present Senior Academic Professional/Principal Research Scientist School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA. Teaching at the undergraduate level has been one of the major responsibilities since Jan ‘92. Taught both theory and lab courses in the areas of yarn formation, weaving, knitting, fiber science, nonwovens, physical testing and quality control. Academic responsibility shifted from full-time research to teaching & research as a result of achieving consistently high teaching evaluations. After the School of Polymer & Fiber Engineering merged with the School of Materials Science and Engineering in 2010, I have been serving as one of the main instructors for two laboratory based MSE core courses (MSE 3021-Materails Laboratory-I, which focuses on materials characterization, and MSE 4022-Materials Laboratory-II, which focuses on materials fabrication). Two other non-laboratory courses I began to teach in recent semesters are MSE 3720-Introduction to Polymer and Fiber Enterprise and MSE 2001-Principles and Applications of Engineering Materials.
    [Show full text]
  • UNITED STATES PATENT OFFICE 2,153,13 YARN CONDITIONING PEROCESSES and COMPOST ONS THERFOR, Joseph B
    Patented Apr. 4, 1939 2,153,137 UNITED STATES PATENT OFFICE 2,153,13 YARN CONDITIONING PEROCESSES AND COMPOST ONS THERFOR, Joseph B. Dickey and James G. McNally, Roches ter, N. Y., assignors to Eastman Kodak Com pany, Rochester, N. Y., a corporation of New Jersey No Drawing. Application November 26, 193, Serial No. 176,687 8 Claims. (C. 28-1) This invention relates to the conditioning of various lubricants when applied to such yarns. A textile yarns and more particularly to the condi still further object is to provide yarn softening tioning of filaments and yarns composed of or and lubricating formulae which can be readily ganic derivatives of cellulose such as cellulose removed from the yarns by the usual Scour baths. 5 acetate, cellulose acetate propionate, cellulose A still further object is to provide an improved 5 acetate butyrate, etc., to render them more method for the conditioning of yarns, particus amenable to textile operations such as knitting larly those composed of or containing organic and the like. derivatives of cellulose such as cellulose acetate, As is well-known in the manufacture of yarns, whereby the yarn is rendered Soft and pliable and O particularly those composed of or containing cel capable of employment in a variety of textile O lulose organic derivatives, it is necessary to treat operations where complicated designs or stitches the yarn in order to reduce the tendency toward are employed. Other objects will appear herein breakage of the individual flaments or fibers after. ... m. When they are subjected to various mechanical These objects are accomplished by the follow 5 strains and to lubricate the yarn in order to facili ing invention which, in its broader aspects, com- s tate handling in such operations as spinning, prises the discovery that alkyl carbonates having twisting, winding and reeling.
    [Show full text]
  • Heat-Setting for Carpet Yarn - Overheated Steam
    Heat-Setting for Carpet Yarn - Overheated Steam - New Generation – GVA 5009 eco up to 72 ends +++ more production +++ less energy consumption 2 General Information BCF carpet production process chain Ideal BCF Process 200 critical point 180 accelerated 100 fluid 160 drying an cooling 140 condensing heating up 120 100 1 steam solid 80 Acrylic overheated steam overheated steam 60 140 - 150°C 180 - 185°C 190 - 200°C 40 (polyamid) PA PES (polyester) 0,1 130 - 140°C ca. triple point 20 PP (polypropylene) pressuere (bar) Heatsetting Temp. in °C Temp. Heatsetting 0 1 sec 5 sec 10 sec 15 sec 20 sec 25 sec 30 sec 35 sec 40 sec 50 sec 55 sec 60 sec 65 sec temperature in °C 100 200 300 Overheated Steam Curve of boiling Point (Water Vapour) Overheated Steam emerges from saturated steam, pillary oxide film causes the complete carpet later which is further heated under constant pressure. to be more stain resistant. Dirt particles adhere Overheated steam is not saturated any more. less to the fibers. Steam heated to a temperature higher than the boiling point corresponding to its pressure. It can Not against each other, but with each other not exist in contact with water, nor contain water, and equally in rights (example for PA) and resembles a perfect gas; called also surchar- ged steam, anhydrous steam and steam gas and overheated steam saturated steam sometimes also applied to dry steam. › less shrinkage › more shrinkage › more bulk › less bulk The process itself was revolutionary in that it was › no moisture expansion › strong moisture the first, system not operated with saturated steam › resistance against expansion and pressure, but with a superheated steam/air- stain, microbes, fungi, › less resistance mix at atmospheric pressure.
    [Show full text]
  • ABSTRACT MUKAI, YUSUKE. Dielectric
    ABSTRACT MUKAI, YUSUKE. Dielectric Properties of Cotton Fabrics and Their Applications. (Under the direction of Drs. Minyoung Suh and Stephen Michielsen). Uncovering relationships between the structural parameters and the dielectric properties of cotton fabrics brings two consequential benefits: development of a structural analysis method for cotton fabrics and establishment of a reference point to engineer the dielectric properties of cotton fabrics for development of high-performance textile-based electronics. In this context, the goal of this research was to explore the structure-dielectric property relationships in cotton fabrics in a wide range of frequencies and their applications in developing a wearable medical apparatus on a cotton fabric platform. In order to achieve this goal, three experiments were designed and conducted. In the first experiment (Experiment I), the dielectric properties of cotton fabrics were investigated in relation to the fabric construction (either plain-woven or plain-knit), thread count (picks per inch (PPI), ends per inch (EPI), courses per inch (CPI) and wales per inch (WPI)) and solid volume fraction (SVF) in a low-frequency domain (20 Hz – 1 MHz). By manipulating the relative humidity (RH), three major dielectric relaxations were identified in cotton fabrics and those were of electrode polarization, interfacial polarization, and dipolar polarization of bound water. Also, at an elevated RH, both electrode and interfacial polarizations were enhanced due to an increased ionic conductivity in absorbed free water. At 1 MHz, the real part of the relative permittivity of both woven and knitted cotton fabrics reasonably increased with thread count, and this was primarily elucidated with associated increase in the SVF as substantiated by the dielectric mixture theory.
    [Show full text]