Prosthetics Lower Limb IMPRINT

Home , Lamination

ortho production

Publisher Streifeneder ortho.production GmbH

Project Manager Verena Dallmayer

Content Verena Seitz / Wolfgang Weber

Typography / Graphic Arts Carola Kerber

Photography Peter Czajka

Translation Sabine Knobloch / Monika Jones

Print Gotteswinter und Aumaier GmbH

This catalogue is protected by copyright.

Reproduction of the complete catalogue, even in abstracts, in any form or by any means, is only permitted with explicit written authorisation of the Streifeneder ortho.production GmbH. The indicated measurements and weights are guide values without obligation. Slight deviations in construction, shape, colour or scope of supply may occur. Products are subject to change without prior notice after press date of this catalogue, 2015-04-20.

Our general terms and conditions apply; they can be viewed anytime at www.streifeneder.com/op.

Page 119 – 160: Licensed from WillowWood Content

• History...... 4 – 5 • Quality is our Claim...... 6 – 7 • Contacting us...... 7 • Development & Production...... 8 – 9 • Training Centre Streifeneder ortho.training...... 10 – 11 • PRO.create – the Prosthesis Configurator...... 12 • Walky System by Streifeneder ortho.production...... 13 • Prostheses for Children...... 15 – 24 • Prosthetic Feet...... 25 – 54 • Modular Structural Parts...... 55 – 82 • Knee Joints...... 83 – 114 • Hip Joints...... 115 – 118 • Socket Comfort...... 119 – 182 Silicone Liners...... 126 – 140 Gel Liners...... 141 – 148 Application Aids...... 149 – 156 Care Products & Accessories...... 157 – 160 Stump Socks...... 161 – 182

• Locking Systems...... 183 – 214 • Accessories...... 215 – 243 • Little ABC‘s of Orthopaedics...... 244 – 250 • Explanation of Symbols...... 253 • Index...... 254 – 256 • Directory...... 258 – 260 History

1928 The Streifeneder firm is set up by Lilli and Friedrich Georg Streifeneder in Mannheim.

1929 The first patent is applied for.

1931 The property in Schöngeisinger Straße in Fürstenfeldbruck is purchased.

1932 The first orthopaedic workshop is fitted out in Fürstenfeldbruck near Munich.

1945 Further orthopaedic workshops are set up to cater for war invalids.

1949 The orthopaedic workshop starts up at the Bad Tölz Hospital.

1953 The Munich site is opened. The wholesale business is expanded.

1968 The plastics, Streifylen and Streifylast, are launched along with the requisite heat sources.

1992 A production site is set up in Hungary to manufacture plastic products in small series.

1993 The production and distribution division expands further. Move to the new company premises in Emmering, just outside Munich.

1995 Export activities are stepped up.

1997 Takeover of Maschinen-Schmid, the world market leader in socket router machinery.

1998 The product range is extended by the prosthetics product division.

1999 Traditional in-house production is extended and the product spectrum expanded by modular components. “Everything from a single source“ – with our very own department for workshop planning we can now help to realize our clients´ wishes even better.

2001 The new site in Emmering is extended by further storage space to 6,000 qm.

2004 Establishment of distribution structure in China.

2007 Streifeneder ortho.production GmbH is set up as an independent subsidiary.

2009 Streifeneder ortho.production GmbH exports to more than 100 countries.

Streifeneder ortho.production GmbH wins the “red dot design award“ for the knee joint KINEGEN.stream. 2010 A new building is purchased for Streifeneder ortho.production GmbH in Emmering.

2011 Opening of the branch Streifeneder India, located in Gurgaon/Haryana. Establishment of distribution structures in Latin America.

Relocation of Streifeneder ortho.production to the new building with modern training and education-, logistics- and administration centre.

Foundation of Streifeneder Training Centre in Emmering.

2012 Grand opening of Streifeneder Training Centre, with focus on national and international markets. Streifeneder ortho.production GmbH wins the “red dot design award“ for the therapeutic shoe Pluto.

2013 The US-American distribution partner Euro International, located in Tampa/Florida, is integrated in the company as Streifeneder USA.

2014 Streifeneder group receives a new corporate design with new company logo. Quality is our Claim

We are convinced that only constant technical inno- Despite the rapid development of the export va-tion and development is the key to a steady impro- business within the last years and the opening up vement of products and optimal patient care. We apply of new markets such as China, we still value high standards to be able to offer each of our clients Germany as our location to do business. exactly those high-quality products he requires. Each of We are proud of the quality standard “Made in our products is subject to a continuous quality planning, Germany” and even in times of a continuously quality control, quality monitoring and quality im- increasing cost pressure and growing competition provement. In order to be able to satisfy even most indi- due to globalization, we still produce predomi- vidual customer requirements and also in order to close nantly in Germany. product-related gaps in the market, it is essential to have our own production series with large lot sizes, but to also offer products with very individual unit numbers.

Quality management More than eighty years of experience, as well as the certified quality management system we introduced in 1998 according to EN ISO 13485; ensure highest quality level. This quality management system is applied to all business divisions. Especially our product development division makes sure that the high level of quality is not only maintained but steadily increased. Thus, we ensure that we always meet the raising demands of our clients in terms of product development, manufacturing and safety.

Increasing globalisation and changing international security and safety conditions have motivated the World Customs Organisation (WCO) to draft a „Framework of Standards to Secure and Facilitate Global Trade“ (SAFE) to establish a global framework for modern and effective risk management of customs compliances. The aim is to guarantee the security and safety of a continual international supply chain from the product manufacturer to the end consumer. The concept of European Authorised Economic Operator is an EU Customs security programme that started in 2007 and recognises companies as reliable trade partners as they met the following common criteria: customs compliance, appropriate record-keeping, financial solvency and, where relevant, appropriate security and safety standards. Streifeneder ortho.production GmbH, as a globally operating company, has met the challenge and is proud to announce that it has been granted Authorised Economic Operator (AEO-F) certification by German customs in January, 2013, which officially regards the company as a reliable trade partner. The certificate number is DE AEO-F 115235.

On the basis of the EC Regulation 300/2008, we received the status of a known consignor by the LBA (Federal Office of Civil Aviation) in November 2013. We are listed in the EC database with approval number DE/KC01882-01/1118. Because of this we obtain a valuable time savings when processing our air freight. Due to the high standards in our factory at Emmering the consignments do not have to be subject to further security checks at the airport. Because of this we can do even better at achieving our goal that you receive our products as quickly as possible. An important part of our delivery time concept and a valuable time saver. Part of our comprehensive safety concept is that our company is protected against entry by unauthorized persons and keep our shipments to you received the highest security and packaging standards. With this we contribute our share in building a secure supply chain.

Declaration of conformity As manufacturer with sole responsibility, Streifeneder ortho.production GmbH declares that the products referred to in this catalog conform to the requirements of the 93/42 EEC Guidelines concerning medical devices. In order to comply with your documentation requirements, please paste the removable item labels of the products used onto the Streifeneder patient certifi cate and completely fi ll out the patient data. In case of a comp- laint, by means of this customer-/ patient documentation the compliance with all applicable technical guidelines for the alignment of a prostheses as well as the conformity with legal obligations due to the medical devices legislation can be documented.

Please use the detachable article labels to document the products used on the Streifeneder patient certifi cate. Please send the completely fi lled out certifi cate to Streifeneder ortho.production GmbH in case of complaints and a possible use Patient weight of warranty or guarantee claims for used goods.

Certifi cation of Serial number EU guidelines conformity

Contacting us

Communication is a must in a working relationship. Your personal contact to our staff members in the internal sales department as well as our fi eld service is the base of our successful collaboration. It is our goal to react swiftly and effi ciently to all of your wishes, to answer all of your questions and to keep all of the promises we make for our products. Please contact us, we are looking forward to hearing from you!

Via our general offi ce switchboard at +49 8141 6106-0 your call will be directed to the staff member in charge. Of course, you can also send your request by email to [email protected]. Development & Production

Experience technology, create technology, utilize technology - keep track of development and concentrate synergies. It is a vital part of our companys‘ philosophy to continually optimize our operational procedures and production processes. This is why we define the economic growth of our company by our perpetual increase in production efficiency. The creativity, the commitment and the special professional skills of each of our members of staff, as well as our state-of-the-art production facilities are our guarantor for satisfied customers.

Our equipment in terms of up-to-date drawing programs (3D-CAD), simulation software (FEM-calculation) to the point of multi-axial machining centers helps our engineers and orthopaedic technicians to assure and further expand our market position. We subject ourselves and our products to highest quality standards. Therefore our products undergo constant internal quality testing in our own test stands and gait analysis systems. Therefore our customers receive exactly what they can expect from us – best quality and long-lasting products. See the quality of our products and the comprehensive service that we have to offer for yourself! Training Centre Streifeneder ortho.training

In order to stay competitive and in order to meet the growing requirements of the patients, it is no longer enough to just use high quality orthopaedic products. Profound practical skills on the basis of current scientific research and findings creates optimal conditions to always react competently and confidently in daily practice. In order to convey valuable expertise as well as detailed knowledge to specialists in orthopaedic and orthopaedic shoe technology as well as physiotherapy and podiatry, we have originated the Training Centre Streifeneder ortho.training in Emmering. A spacious auditorium (AudiMax) with 160 seats and a fully equipped workshop with 15 work stations, a machine room as well as a patient fitting room and a plaster room on approx. 1.000 sqm offer more than optimal conditions for a qualified advanced and continuous education on the highest level. Modern tools such as multimedia equipment, a fully equipped gait analysis laboratory, course materials and teaching aids that meet the demands of our clients are also part of our standards. Our meticulously elaborated seminar program You can download our current seminar calendar comprehends more than 50 events per year centered with further information about all of our around topics such as silicone processing, pre-preg seminars from our website at processing, synthetic materials or gait analysis. With a www.streifeneder.com/training. flexible program planning on our part, we are also able Of course, we will also gladly send it to you by to react to individual customer´s wishes and to offer post or email. Please feel free to contact us at: seminars about special subjects upon request. [email protected] or In order to guarantee an array of seminars that is as by telephone +49 8141 6106-200. broad as possible we regularly invite high-carat We are looking forward to hearing from you! external guest lecturers to our training centre Streifeneder ortho.training. PRO.create – the Prosthesis Configurator

The PRO.create system enables the virtual composition of a prosthesis directly on your computer screen. After entering predefined measurements for a prosthesis, the software will generate a list with all possible components from our range of products. Starting with the data of the amputee to the choice of components up to placing the order, this system efficiently supports the orthopaedic technician in his work. You can download PRO.create in english using the following link: www.streifeneder.com/op

The first window is used for entering the amputee´s data. You can also create notes with regard to the amputee here. If needed, you can simply call up any already configured prosthesis again.

In the next window you can enter the data with regard to the amputation. Based on these facts (kind of amputation, activity level, overall heights), you will automatically be asked to choose from the matching components.

Now you can choose the respective components. The prostheses will be aligned simultaneously in a window on the side.

At the end of the configuration an order form will be automatically created, that you can directly sent to Streifeneder ortho.production via email to receive a corresponding offer. Walky System by Streifeneder ortho.production

Walky – Includes weight categories. Walky – Describes the degree of mobility in connection with the weight category of functional parts such as Prosthetic Feet, knee- and hip joints. Walky – Simplifies the professional composition of functional parts in connection with structure fitting parts. The degree of mobility and weight category are easily recognizable for the orthopaedic technician and therefore guarantee an adequate patient fitting. Walky – Corresponds to the profile survey sheet of the German Medical Service of Leading Associations of Healthcare Insurance Providers (MDS).

Walky 1 Walky 2

The patient has the capability to use a prostheses in order The patient has the capability to overcome low environmental to walk on level ﬂoors at a steady step rhythm. He or she is the obstacles such as curbstones, single steps or uneven ﬂoors. typical “indoor walker”. He or she is the “outdoor walker”

Therapy goal: Therapy goal: Restoration of the standing and of the walking Restoration of the standing capability and of the walking capability limited to indoor areas. capability, which is unlimited indoors and limited outdoors.

Walky 3 Walky 4

The patient has the capability to move with a prosthesis at The patient has the capability to move with high or variable different walking speeds and to overcome almost all of the speed regularly. He or she is very active and lively. The use of environmental obstacles. In addition, he or she carries out the prostheses clearly exceeds the basic walking capability. professional or therapeutic activities, which demand a use of Due to the high demands, the prostheses is put under increased the prostheses for more than just simple locomotion. impact load, stress exposure and deformation load. He or she is the “unlimited outdoor walker”. He or she is the “unlimited outdoor walker with particularly high demands”. Therapy goal. Restoration of the standing capability as well as the walking Therapy goal: capability, which is not limited indoors and only insigniﬁcantly Restoration of the standing capability and of the walking/ mobility limited outdoors. capability, which is unlimited indoors as well as outdoors.

Weight category The component with the lowest maximum (body) weight The body weight as well as the weight of regularly in the construction of a prostheses is decisive for the maximum load of the entire prosthesis. max. or frequently carried loads determines in which 75 kg weight category the patient should be placed.

Prostheses for Children Prostheses for Children Prostheses for Children Prostheses for Children

Streifeneder ortho.production has made it its business to help children whose leg has been amputated or who have to cope with a congenital malformation with prosthetic care. An individual modular system has therefore been included into the product range. The diminishment of the components allows for a proportionally suitable prosthetic supply for small children up to adolescents. Finally, a smooth conversion to the modular system for adults is possible. The specific requirements of childrens‘ prostheses have been taken into consideration by designing the joints in a special manner. A polycentric knee joint with a large angle of declination and three different proximal connecting options that partially allow additional rotation adjustments, offers the best possible freedom to move and an individual ad- aptation to the requirements of the child. A childs‘ desire for powerful hues was also met with the selection of the product colour. The use is restricted to a body weight of 45 kg, a Foot size of 21 cm and a body height of 145 cm. Joints and adapters are made of light metal/titanium to reduce the weight of the system even further. In order to allow for the use of Prosthetic Feet from the adult program we included the adapter 100K23/S in our program, which connects the pyramid adapter for 30- and 34-mm-systems to the modular system for children.

Every component of the childrens‘ prosthetics range follows the strict ISO 10328 guideline for lower limbs and takes into account the reduced wearing time which is due to the growth of the children.

We recommend verifying the components every third month because the system is subjected to extreme stresses. These inspections should be carried out with regard to functional performance, tubular adapters, possible distortions and damages.

Structured and functional parts made of aluminum and titanium coming from the adults’ product range are preferably used for larger children. Prostheses for Children

S.A.C.H. Foot for Children with Split Toe

• thread M8 • heel height: 10 mm • with split toe • with enclosed heel wedge • recommended S.A.C.H. foot adapter 16AK1/M8

Size / weight Side Height max.2kg Item-No. 14 cm / 80 g left 46 mm 35 kg 30A26/14L 14 cm / 80 g right 46 mm 35 kg 30A26/14R 16 cm / 110 g left 51 mm 35 kg 30A26/16L 16 cm / 110 g right 51 mm 35 kg 30A26/16R 18 cm / 150 g left 57 mm 45 kg 30A26/18L 18 cm / 150 g right 57 mm 45 kg 30A26/18R 20 cm / 210 g left 63 mm 45 kg 30A26/20L 20 cm / 210 g right 63 mm 45 kg 30A26/20R

S.A.C.H. Foot Adapter -Aluminum-

• complete with bolted connection • thread M8

Bolt Weight Eff. height max.2kg Item-No. Steel 68 g 5 mm 45 kg 160K1/M8

For bonding we recommend item 118P32!

www.streifeneder.com/op 17 Prostheses for Children Prostheses for Children

Tube Adapter -Aluminum-, Ø 22 mm

• with aluminum tube Ø 22 x 2 mm • yellow/green anodised • with 4 adjustment set screws 22A2/M6x12, zinc-plated • tube length: 300 mm

Tube ø Weight Eff. height max.2kg Item-No. 22 mm 186 g min. 85 mm 45 kg 15K2/A300 max. 335 mm

Tube -Aluminum-, Ø 22 mm

• sanded and true to size • yellow anodised • Ø 22 x 2 mm

Length Weight Tube ø max.2kg Item-No. 320 mm 144 g 22 mm 45 kg 15K2/A320

18 www.streifeneder.com/op Prostheses for Children Prostheses for Children

Tube Clamp Adapter -Aluminum-, Ø 22 mm

• total height: 55 mm • for tubes Ø 22 mm • with 4 adjustment set screws 22A2/M6x12, zinc-plated • green anodised

Material Weight Eff. height max.2kg Item-No. Aluminum 62 g 15 mm 45 kg 110K11/A

Tube Clamp Adapter 10° tilt -Aluminum-, Ø 22 mm

• total height: 60 mm • for tubes Ø 22 mm • with 4 adjustment set screws 22A2/M6x12, zinc-plated • green anodised

Material Weight Eff. height max.2kg Item-No. Aluminum 62 g 19 mm 45 kg 110K12/A

Tube Clamp Adapter with Adjustment Core -Aluminum-, Ø 22 mm

• total height: 42 mm • for tubes Ø 22 mm • green anodised

Material Weight Eff. height max.2kg Item-No. Aluminum 50 g 4 mm 45 kg 110K15/A

Socket Adapter -Aluminum-

• with adjustment core • with center bore Ø 6,1 mm • for connection of different modular parts or distal socket ends • green anodised

Material Weight Eff. height max.2kg Item-No. Aluminum 44 g 4 mm 45 kg 100K90/A

www.streifeneder.com/op 19 Prostheses for Children Prostheses for Children

Socket Adapter -Aluminum-

• with 4 adjustment set screws 22A2/M6x12, zinc-plated • for connection of different modular parts or distal socket ends

Material Weight Eff. height max.2kg Item-No. Aluminum 49 g 18 mm 45 kg 100K92/A

Connection Adapter for Children with Adjustment Core -Stainless Steel-

• for tube adapter Ø 22 mm • connection between pyramide acceptance with Ø 30 mm to children tube adapter Ø 22 mm • low clearance: 23 mm

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 85 g 18 mm 60 kg 100K23/S

Socket Attachment Block -Plastic-

• with 4 countersink screws 22A5/M5x16 • with lamination dummy • length x width: 80 x 80 mm

Material Weight Eff. height max.2kg Item-No. Plastic 110 g 32 mm 45 kg 120K7

Socket Adapter -Aluminum-

• with adjustment core and lamination anchor • for direct lamination

Material Weight Eff. height max.2kg Item-No. Aluminum 36 g 6 mm 45 kg 100K3/A

20 www.streifeneder.com/op Prostheses for Children Prostheses for Children

Socket Adapter -Aluminum-

• rotational adjustment with adjustment screws • with adjustment screws 22A2/M6x12 and clamping screw • to be directly laminated in • delivered with lamination aid

Material Weight Eff. height max.2kg Item-No. Aluminum 60 g 20 mm 45 kg 100K4/A

Double Adapter -Titanium-

• connections with 4 adjustment set screws 22A2/M6x12 each • for connection between 2 adjustment cores

Material Weight Eff. height max.2kg Item-No. Titanium 88 g 32 mm 45 kg 100K50/T32 Titanium 94 g 45 mm 45 kg 100K50/T45 Titanium 101 g 60 mm 45 kg 100K50/T60

3K51 Modular Hip Joint

• proximal: lamination disc • distal: clamp for tube with Ø 22 mm • incl. counter sunk screw 22A5/M5x16

Material Weight Eff. height max.2kg Item-No. Aluminum 228 g 15 mm 45 kg 3K51

Counter-Sunk Screw

• allen screw for hip joint 3K51

Material Weight Dimensions Item-No. Steel, zinc-plated 3,8 g M5 x 16 mm 22A5/M5x16

www.streifeneder.com/op 21 Prostheses for Children Prostheses for Children

3K31 Modular Knee Joint

• total height: 82 mm • monocentric • light weight / highly durable aluminum • proximal: adjustment core / stainless steel • distal: tube clamp Ø 22 mm • with integrated inner extension assist • knee ﬂexion range: 145°

Accessories • cosmetic soft foam cover 600K32

Material Weight Eff. height max.2kg Item-No. Aluminum 169 g 41 mm 45 kg 3K31

3K41 Modular Knee Joint with Lock

• total height: 82 mm • monocentric • light weight / highly durable aluminum • proximal: adjustment core / stainless steel • distal: tube clamp Ø 22 mm • knee ﬂexion range: 145°

Accessories • cosmetic soft foam cover 600K32

Material Weight Eff. height max.2kg Item-No. Aluminum 152 g 41 mm 45 kg 3K41

3K61 Modular Knee Joint

• total height: 101 mm • polycentric • adjustable axis lock • integrated inner extension assist • with 3 selectable proximal connections: adjustment core adapter: 3K61/ E1 (with rotation adjustment), socket adapter: 3K61/E2, lamination anchor: 3K61/E3 • distal connection: tube clamp Ø 22 mm • knee ﬂexion range: 150°

Accessories • cosmetic soft foam cover 600K32

Material Weight Eff. height max.2kg Item-No. Aluminum 334 g 70 mm 45 kg 3K61

22 www.streifeneder.com/op Prostheses for Children Prostheses for Children

Adjustment Core Adapter -Stainless Steel-

• for modular knee joint 3K61 • with additional rotation adjustment

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 40 g 2 mm 45 kg 3K61/E1

Socket Adapter -Stainless Steel-

• for modular knee joint 3K61

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 55 g 4 mm 45 kg 3K61/E2

Lamination Anchor -Stainless Steel-

• for modular knee joint 3K61 • for knee disarticulation

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 55 g 6 mm 45 kg 3K61/E3

www.streifeneder.com/op 23 Prostheses for Children Prostheses for Children

Cosmetic Soft Foam Cover

• made of PUR soft foam • for modular trans-tibial and knee-disarticulation prostheses • colour: peach • applicable for left and right side • with Ø 19 mm bore

Length Upper ø Lower ø Item-No. 50 cm 18 cm 15 cm 600K7

Cosmetic Soft Foam Cover

• made of PUR soft foam • for modular trans-femoral and hip-disarticulation prostheses • 30° knee ﬂexion • colour: peach • very distinctive pre-shaped calf • matching nylon cosmetic stocking 200K15 • with Ø 19 mm bore

Side Calf circumference Item-No. left 32 cm 600K32/L right 32 cm 600K32/R

Nylon Cosmetic Stocking for Children

• material: 100 % polyamid (nylon) • for above knee (AK) prostheses for children • colour: peach

PU = 1 piece

Leg length Foot length Item-No. 34 cm 10 cm 200K15/1 37 cm 11 cm 200K15/2 44 cm 12 cm 200K15/3

24 www.streifeneder.com/op Prostheses for Children Prostheses for Children

Plastic Valve

• without automatic air outlet • outer valve diameter 26 mm

Weight Item-No. 20 g 6K26

www.streifeneder.com/op 25

Prosthetic Feet Prosthetic Feet Prosthetic Feet

In the course of human evolution from quadruped to biped, the healthy foot has decisively changed in its function and complexity. It is the load-bearing element of the body.

A high number of receptors inside the sole tissue of the foot transmit important information about the composition of the floor to the walking person – information, which has to be compensated by the teamwork of bones and muscles. Diverse forces are to be kept away from the body and are to be reduced with an astonishing possibility of movement into any direction. The upper ankle joint allows dorsal and plantar flexions. The pro- and supination movement comes from the lower ankle joint as well as from the small joints of the middle foot. Torsional forces acting on the sound foot are damped, cushioned and consequently not transmitted to the body.

All these various tasks have to be accomplished by a prosthetic foot in order to ensure the greatest possible use for the amputee and his or her individual activity level. Therefore the correct selection of the prosthetic foot is of utmost importance with regard to a successful fitting of the amputee.

Selection criteria of the orthopaedic technician are • Activity level • Weight of the patient • Function • Height of the prosthetic foot • Weight of the prosthetic foot • Fit inside the shoe The individual fitting of each patient is our primary objective at Streifeneder. In order to meet our clients´ demands, we rely on top quality products and unfailing service.

The prosthetic foot is subjected to high dynamic loads to which it must resist over a very long period of time without larger symptoms of wear or any change in its characteristics. Depending on the alignment of the prosthesis, the forefoot lever helps to increase the stability during stance phase or simplifies the toe rollover process. An energy-efficient walking is expected that includes safety, comfort and dynamic. The requirements for a prosthetic foot, which are additionally influenced by the individual demands and feelings of the patient, eventually determine the selection of the foot. Prosthetic Feet – S.A.C.H.-Feet Prosthetic Feet

S.A.C.H. stands for “Solid Ankle Cushioned Heel”. This essentially describes the mode of operation of the time-tested prosthetic foot. The classic S.A.C.H.-foot consists of a hard wooden core, a flexible foot-shaped part and a solidly foamed soft heel wedge. The combination of these components primarily results in a soft and comfortable heel strike.

The S.A.C.H.-foot is used in the endoskeletal as well as in the exoskeletal construction and represents in practice a reasonably priced supply possibility for amputees up to activity level 2.

Besides the very realistic form of the toes, our S.A.C.H.-feet are especially esteemed by patients and orthopaedic technicians for their robustness. The “allrounder” among prosthetic feet can also partially be used in swimming and wet areas and is therefore suitable for the construction of bathing prostheses. S.A.C.H.-feet are hardly susceptible to sand and dirt and can easily and rapidly be cleaned. Prosthetic Feet

DYNA-base Foot max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 to 2 • heel height: 10 mm • stability • comfortable heel features • energy efﬁcient roll over by carbon ﬁber compound spring • incl. foot shell • split toe allows free choice of shoes • maintenance free • warranty: 12 months

Size Side Eff. height Weight Item-No. 21 cm left 60 mm 400 g 55A1/21L 21 cm right 60 mm 400 g 55A1/21R 22 cm left 60 mm 400 g 55A1/22L 22 cm right 60 mm 400 g 55A1/22R 23 cm left 60 mm 430 g 55A1/23L 23 cm right 60 mm 430 g 55A1/23R 24 cm left 60 mm 445 g 55A1/24L 24 cm right 60 mm 445 g 55A1/24R 25 cm left 63 mm 525 g 55A1/25L 25 cm right 63 mm 525 g 55A1/25R 26 cm left 63 mm 570 g 55A1/26L 26 cm right 63 mm 570 g 55A1/26R 27 cm left 68 mm 625 g 55A1/27L 27 cm right 68 mm 625 g 55A1/27R 28 cm left 68 mm 640 g 55A1/28L 28 cm right 68 mm 640 g 55A1/28R 29 cm left 68 mm 675 g 55A1/29L 29 cm right 68 mm 675 g 55A1/29R 30 cm left 68 mm 695 g 55A1/30L 30 cm right 68 mm 695 g 55A1/30R

www.streifeneder.com/op 31 Prosthetic Feet Prosthetic Feet

Geriatric S.A.C.H. Foot, light max. 85 kg • max. patient weight: 85 kg • activity level (walky): 1 • heel height 10 mm: ± 2 mm • with toes • foot made of polyurethane • core made of alder wood with bushing • carbon-kevlar forefoot spring • ﬂat forefoot and ﬂat heel for simple alignment

Size / weight Side Thread Height Item-No. 22 cm / 250 g left M10 70 mm 30A20/22L 22 cm / 250 g right M10 70 mm 30A20/22R 23 cm / 280 g left M10 70 mm 30A20/23L 23 cm / 280 g right M10 70 mm 30A20/23R 24 cm / 300 g left M10 70 mm 30A20/24L 24 cm / 300 g right M10 70 mm 30A20/24R 25 cm / 350 g left M10 75 mm 30A20/25L 25 cm / 350 g right M10 75 mm 30A20/25R 26 cm / 380 g left M10 75 mm 30A20/26L 26 cm / 380 g right M10 75 mm 30A20/26R 27 cm / 420 g left M10 75 mm 30A20/27L 27 cm / 420 g right M10 75 mm 30A20/27R 28 cm / 460 g left M10 80 mm 30A20/28L 28 cm / 460 g right M10 80 mm 30A20/28R 29 cm / 520 g left M10 85 mm 30A20/29L 29 cm / 520 g right M10 85 mm 30A20/29R

Geriatric S.A.C.H. Foot, light, high heel max. 85 kg • max. patient weight: 85 kg • activity level (walky): 1 • heel height: 18 mm ± 2 mm • with toes • foot made of polyurethane • core made of alder wood with bushing • carbon-kevlar forefoot spring • heel is ﬂat-convex • ﬂat forefoot for simple alignment

Size / weight Side Thread Height Item-No. 22 cm / 240 g left M10 70 mm 30A9/22L 22 cm / 240 g right M10 70 mm 30A9/22R 23 cm / 260 g left M10 70 mm 30A9/23L 23 cm / 260 g right M10 70 mm 30A9/23R 24 cm / 280 g left M10 70 mm 30A9/24L 24 cm / 280 g right M10 70 mm 30A9/24R 25 cm / 330 g left M10 75 mm 30A9/25L 25 cm / 330 g right M10 75 mm 30A9/25R 26 cm / 360 g left M10 75 mm 30A9/26L 26 cm / 360 g right M10 75 mm 30A9/26R 27 cm / 400 g left M10 75 mm 30A9/27L 27 cm / 400 g right M10 75 mm 30A9/27R 28 cm / 440 g left M10 80 mm 30A9/28L 28 cm / 440 g right M10 80 mm 30A9/28R 29 cm / 500 g left M10 85 mm 30A9/29L 32 www.streifeneder.com/op 29 cm / 500 g right M10 85 mm 30A9/29R Prosthetic Feet Prosthetic Feet

S.A.C.H. Foot for Women, high heel max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 to 2 • heel height: 35 mm ± 2 mm • with enclosed heel wedge • foot made of polyurethane • core made of alder wood with bushing • heel is ﬂat-convex • ﬂat forefoot for simple alignment

Size / weight Side Thread Height Item-No. 23 cm / 360 g left M8 70 mm 30A4/23L 23 cm / 360 g right M8 70 mm 30A4/23R 24 cm / 395 g left M8 70 mm 30A4/24L 24 cm / 395 g right M8 70 mm 30A4/24R 25 cm / 440 g left M8 75 mm 30A4/25L 25 cm / 440 g right M8 75 mm 30A4/25R

S.A.C.H. Foot for Women, high heel, integrated max. 100 kg heel wedge

• max. patient weight: 100 kg • activity level (walky): 1 to 2 • heel height: 35 mm ± 2 mm • with integrated heel wedge • foot made of polyurethane • core made of alder wood with bushing • heel is ﬂat-convex • ﬂat forefoot for simple alignment

Size / weight Side Thread Height Item-No. 23 cm / 350 g left M8 70 mm 30A2/23L 23 cm / 350 g right M8 70 mm 30A2/23R 24 cm / 380 g left M8 70 mm 30A2/24L 24 cm / 380 g right M8 70 mm 30A2/24R 25 cm / 420 g left M8 75 mm 30A2/25L 25 cm / 420 g right M8 75 mm 30A2/25R

www.streifeneder.com/op 33 Prosthetic Feet Prosthetic Feet

S.A.C.H. Foot for Men max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 to 2 • heel height: 10 mm ± 2 mm • with enclosed heel wedge • foot made of polyurethane • core made of alder wood with bushing • ﬂat forefoot and ﬂat heel for simple alignment

Size / weight Side Thread Height Item-No. 22 cm / 300 g left M10 70 mm 30A21/22L 22 cm / 300 g right M10 70 mm 30A21/22R 23 cm / 365 g left M10 70 mm 30A21/23L 23 cm / 365 g right M10 70 mm 30A21/23R 24 cm / 400 g left M10 70 mm 30A21/24L 24 cm / 400 g right M10 70 mm 30A21/24R 25 cm / 445 g left M10 75 mm 30A21/25L 25 cm / 445 g right M10 75 mm 30A21/25R 26 cm / 500 g left M10 75 mm 30A21/26L 26 cm / 500 g right M10 75 mm 30A21/26R 27 cm / 535 g left M10 75 mm 30A21/27L 27 cm / 535 g right M10 75 mm 30A21/27R 28 cm / 600 g left M10 80 mm 30A21/28L 28 cm / 600 g right M10 80 mm 30A21/28R 29 cm / 670 g left M10 85 mm 30A21/29L 29 cm / 670 g right M10 85 mm 30A21/29R

S.A.C.H. Foot for Men, high heel max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 to 2 • heel height: 18 mm ± 2 mm • with enclosed heel wedge • foot made of polyurethane • core made of alder wood with bushing • heel is ﬂat-convex • ﬂat forefoot for simple alignment

Size / weight Side Thread Height Item-No. 22 cm / 295 g left M10 70 mm 30A5/22L 22 cm / 295 g right M10 70 mm 30A5/22R 23 cm / 360 g left M10 70 mm 30A5/23L 23 cm / 360 g right M10 70 mm 30A5/23R 24 cm / 395 g left M10 70 mm 30A5/24L 24 cm / 395 g right M10 70 mm 30A5/24R 25 cm / 440 g left M10 75 mm 30A5/25L 25 cm / 440 g right M10 75 mm 30A5/25R 26 cm / 495 g left M10 75 mm 30A5/26L 26 cm / 495 g right M10 75 mm 30A5/26R 27 cm / 530 g left M10 75 mm 30A5/27L 27 cm / 530 g right M10 75 mm 30A5/27R 28 cm / 595 g left M10 80 mm 30A5/28L 28 cm / 595 g right M10 80 mm 30A5/28R 29 cm / 660 g left M10 85 mm 30A5/29L 29 cm / 660 g right M10 85 mm 30A5/29R

34 www.streifeneder.com/op Prosthetic Feet Prosthetic Feet

S.A.C.H. Foot for Men, integrated heel wedge max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 to 2 • heel height: 18 mm ± 2 mm • with integrated heel wedge • foot made of polyurethane • core made of alder wood with bushing • heel is ﬂat-convex • ﬂat forefoot for simple alignment

Size / weight Side Thread Height Item-No. 22 cm / 290 g left M8 70 mm 30A3/22L 22 cm / 290 g right M8 70 mm 30A3/22R 23 cm / 350 g left M10 70 mm 30A3/23L 23 cm / 350 g right M10 70 mm 30A3/23R 24 cm / 380 g left M10 70 mm 30A3/24L 24 cm / 380 g right M10 70 mm 30A3/24R 25 cm / 420 g left M10 75 mm 30A3/25L 25 cm / 420 g right M10 75 mm 30A3/25R 26 cm / 480 g left M10 75 mm 30A3/26L 26 cm / 480 g right M10 75 mm 30A3/26R 27 cm / 520 g left M10 75 mm 30A3/27L 27 cm / 520 g right M10 75 mm 30A3/27R 28 cm / 580 g left M10 80 mm 30A3/28L 28 cm / 580 g right M10 80 mm 30A3/28R 29 cm / 640 g left M10 85 mm 30A3/29L 29 cm / 640 g right M10 85 mm 30A3/29R

S.A.C.H. Foot for Men, up to 150 kg max. 150 kg • max. patient weight: 150 kg • activity level (walky): 1 to 2 • heel height: 18 mm ± 2 mm • carbon-frame with internal spring • foot made of polyurethane • with dorsal plastic insert • heel is ﬂat-convex • ﬂat forefoot for simple alignment • use only in combination with SACH-Foot-Adapter 16A9/M10

Size / weight Side Thread Height Item-No. 23 cm / 520 g left M10 70 mm 30A150/23L 23 cm / 520 g right M10 70 mm 30A150/23R 24 cm / 550 g left M10 70 mm 30A150/24L 24 cm / 550 g right M10 70 mm 30A150/24R 25 cm / 585 g left M10 75 mm 30A150/25L 25 cm / 585 g right M10 75 mm 30A150/25R 26 cm / 630 g left M10 75 mm 30A150/26L 26 cm / 630 g right M10 75 mm 30A150/26R 27 cm / 680 g left M10 75 mm 30A150/27L 27 cm / 680 g right M10 75 mm 30A150/27R 28 cm / 730 g left M10 80 mm 30A150/28L 28 cm / 730 g right M10 80 mm 30A150/28R 29 cm / 790 g left M10 85 mm 30A150/29L 29 cm / 790 g right M10 85 mm 30A150/29R

www.streifeneder.com/op 35 Prosthetic Feet Prosthetic Feet

S.A.C.H. Foot for Men up to 150 kg with max. 150 kg Adapter

• max. patient weight: 150 kg • activity level (walky): 1 to 2 • heel height: 18 mm ± 2 mm • with glued S.A.C.H. Foot Adapter 16A9/M10 • carbon-frame with internal spring • foot made of polyurethane • with dorsal plastic insert • heel is ﬂat-convex • ﬂat forefoot for simple alignment

Size / weight Side Thread Height Item-No. 23 cm / 520 g left M10 70 mm 30A151/23L 23 cm / 520 g right M10 70 mm 30A151/23R 24 cm / 550 g left M10 70 mm 30A151/24L 24 cm / 550 g right M10 70 mm 30A151/24R 25 cm / 585 g left M10 75 mm 30A151/25L 25 cm / 585 g right M10 75 mm 30A151/25R 26 cm / 630 g left M10 75 mm 30A151/26L 26 cm / 630 g right M10 75 mm 30A151/26R 27 cm / 680 g left M10 75 mm 30A151/27L 27 cm / 680 g right M10 75 mm 30A151/27R 28 cm / 730 g left M10 80 mm 30A151/28L 28 cm / 730 g right M10 80 mm 30A151/28R 29 cm / 790 g left M10 85 mm 30A151/29L 29 cm / 790 g right M10 85 mm 30A151/29R

S.A.C.H. Foot for Men up to 175 kg with Adapter

• max. patient weight: 175 kg • activity level (walky): 1 to 2 • heel height: 18 mm ± 2 mm • with glued S.A.C.H. Foot Adapter 16A6/M10 • carbon-frame with internal spring • foot made of polyurethane • heel is ﬂat-convex • ﬂat forefoot for simple alignment

Size Side Thread Height Item-No. 25 cm left M10 80 mm 30A175/25L 25 cm right M10 80 mm 30A175/25R 26 cm left M10 80 mm 30A175/26L 26 cm right M10 80 mm 30A175/26R 27 cm left M10 85 mm 30A175/27L 27 cm right M10 85 mm 30A175/27R 28 cm left M10 85 mm 30A175/28L 28 cm right M10 85 mm 30A175/28R 29 cm left M10 90 mm 30A175/29L 29 cm right M10 90 mm 30A175/29R

36 www.streifeneder.com/op Prosthetic Feet Prosthetic Feet

S.A.C.H. Foot for Men up to 225 kg, with glued max. 225 kg S.A.C.H. Foot Adapter

• max. patient weight: 225 kg • activity level (walky): 1 • heel height: 18 mm ± 2 mm • with glued S.A.C.H. Foot Adapter 16A7/M14 • carbon-frame with internal spring • foot made of polyurethane • heel is ﬂat-convex • ﬂat forefoot for simple alignment

Size Side Thread Height Item-No. 25 cm left M14 80 mm 30A225/25L 25 cm right M14 80 mm 30A225/25R 26 cm left M14 80 mm 30A225/26L 26 cm right M14 80 mm 30A225/26R 27 cm left M14 85 mm 30A225/27L 27 cm right M14 85 mm 30A225/27R 28 cm left M14 85 mm 30A225/28L 28 cm right M14 85 mm 30A225/28R 29 cm left M14 90 mm 30A225/29L 29 cm right M14 90 mm 30A225/29R 30 cm left M14 90 mm 30A225/30L 30 cm right M14 90 mm 30A225/30R

Dynamic S.A.C.H. Foot with Split Toe max. 125 kg • max. patient weight: 125 kg • activity level (walky): 1 to 2 • heel height: 10 mm ± 5 mm • with split toe • foot made of polyurethane • core made of alder wood with bushing • comfortable heel strike • toe roll-over smoother than ordinary Streifeneder-S.A.C.H.-feet • dynamic return of the fore foot through innovative foam technology

Size / weight Side Thread Height Item-No. 22 cm / 290 g left M10 70 mm 30A27/22L 22 cm / 290 g right M10 70 mm 30A27/22R 23 cm / 310 g left M10 70 mm 30A27/23L 23 cm / 310 g right M10 70 mm 30A27/23R 24 cm / 350 g left M10 70 mm 30A27/24L 24 cm / 350 g right M10 70 mm 30A27/24R 25 cm / 385 g left M10 75 mm 30A27/25L 25 cm / 385 g right M10 75 mm 30A27/25R 26 cm / 480 g left M10 75 mm 30A27/26L 26 cm / 480 g right M10 75 mm 30A27/26R 27 cm / 500 g left M10 75 mm 30A27/27L 27 cm / 500 g right M10 75 mm 30A27/27R 28 cm / 560 g left M10 80 mm 30A27/28L 28 cm / 560 g right M10 80 mm 30A27/28R 29 cm / 600 g left M10 80 mm 30A27/29L 29 cm / 600 g right M10 80 mm 30A27/29R 30 cm / 680 g left M10 80 mm 30A27/30L 30 cm / 680 g right M10 80 mm 30A27/30R www.streifeneder.com/op 37 Prosthetic Feet Prosthetic Feet

S.A.C.H. Foot for Bathing max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 to 2 • heel height: 10 mm ± 2 mm • suitable for bathing/swimming prostheses • foot made of PUR with waterproof coating of wooden surface • core made of alder wood with bushing • and pressure-cast heel wedge • heel is ﬂat-convex

Size / weight Side Thread Height Item-No. 22 cm / 310 g left M10 70 mm 30A6/22L 22 cm / 310 g right M10 70 mm 30A6/22R 23 cm / 370 g left M10 70 mm 30A6/23L 23 cm / 370 g right M10 70 mm 30A6/23R 24 cm / 420 g left M10 70 mm 30A6/24L 24 cm / 420 g right M10 70 mm 30A6/24R 25 cm / 450 g left M10 75 mm 30A6/25L 25 cm / 450 g right M10 75 mm 30A6/25R 26 cm / 500 g left M10 75 mm 30A6/26L 26 cm / 500 g right M10 75 mm 30A6/26R 27 cm / 540 g left M10 75 mm 30A6/27L 27 cm / 540 g right M10 75 mm 30A6/27R 28 cm / 620 g left M10 80 mm 30A6/28L 28 cm / 620 g right M10 80 mm 30A6/28R 29 cm / 650 g left M10 85 mm 30A6/29L 29 cm / 650 g right M10 85 mm 30A6/29R

Single-Axis-Foot for Women, high heel max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 • heel height: 25-35 mm • foot made of polyurethane • core made of alder wood • forefoot is ﬂat-convex • recommended Single-Axis-Foot Adapter: 32A1, 32A2, 32A3, 32A4

Size / weight Side Adapter Height Item-No. 23 cm / 310 g left 22-25 36 mm 30A16/23L 23 cm / 310 g right 22-25 36 mm 30A16/23R 24 cm / 330 g left 22-25 38 mm 30A16/24L 24 cm / 330 g right 22-25 38 mm 30A16/24R 25 cm / 370 g left 22-25 40 mm 30A16/25L 25 cm / 370 g right 22-25 40 mm 30A16/25R

38 www.streifeneder.com/op Prosthetic Feet Prosthetic Feet

Geriatric-Single-Axis-Foot, light, high heel max. 75 kg • max. patient weight: 75 kg • activity level (walky): 1 • heel height: 15-25 mm • foot made of polyurethane • core made of alder wood • carbon-kevlar forefoot spring • forefoot is ﬂat-convex • recommended Single-Axis-Foot Adapter 32A2 and 32A3

Size / weight Side Adapter Height Item-No. 22 cm / 195 g left 22-25 36 mm 30A13/22L 22 cm / 195 g right 22-25 36 mm 30A13/22R 23 cm / 225 g left 22-25 36 mm 30A13/23L 23 cm / 225 g right 22-25 36 mm 30A13/23R 24 cm / 275 g left 22-25 38 mm 30A13/24L 24 cm / 275 g right 22-25 38 mm 30A13/24R 25 cm / 300 g left 22-25 40 mm 30A13/25L 25 cm / 300 g right 22-25 40 mm 30A13/25R 26 cm / 365 g left 26-30 40 mm 30A13/26L 26 cm / 365 g right 26-30 40 mm 30A13/26R 27 cm / 390 g left 26-30 40 mm 30A13/27L 27 cm / 390 g right 26-30 40 mm 30A13/27R 28 cm / 450 g left 26-30 42 mm 30A13/28L 28 cm / 450 g right 26-30 42 mm 30A13/28R 29 cm / 490 g left 26-30 42 mm 30A13/29L 29 cm / 490 g right 26-30 42 mm 30A13/29R

Single-Axis-Foot for Men, high heel max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 • heel height: 15-25 mm • foot made of polyurethane • core made of alder wood • forefoot is ﬂat-convex • recommended Single-Axis-Foot Adapter: 32A1, 32A2, 32A3, 32A4

Size / weight Side Adapter Height Item-No. 23 cm / 310 g left 22-25 36 mm 30A15/23L 23 cm / 310 g right 22-25 36 mm 30A15/23R 24 cm / 330 g left 22-25 38 mm 30A15/24L 24 cm / 330 g right 22-25 38 mm 30A15/24R 25 cm / 370 g left 22-25 40 mm 30A15/25L 25 cm / 370 g right 22-25 40 mm 30A15/25R 26 cm / 430 g left 26-30 40 mm 30A15/26L 26 cm / 430 g right 26-30 40 mm 30A15/26R 27 cm / 470 g left 26-30 40 mm 30A15/27L 27 cm / 470 g right 26-30 40 mm 30A15/27R 28 cm / 500 g left 26-30 42 mm 30A15/28L 28 cm / 500 g right 26-30 42 mm 30A15/28R 29 cm / 520 g left 26-30 42 mm 30A15/29L 29 cm / 520 g right 26-30 42 mm 30A15/29R

www.streifeneder.com/op 39 Prosthetic Feet Prosthetic Feet

Single-Axis-Foot for Men max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 • heel height: 10 mm • foot made of polyurethane • core made of alder wood • forefoot is ﬂat-convex • recommended Single-Axis-Foot Adapter: 32A1, 32A2, 32A3, 32A4

Size / weight Side Adapter Height Item-No. 22 cm / 260 g left 22-25 36 mm 30A14/22L 22 cm / 260 g right 22-25 36 mm 30A14/22R 23 cm / 310 g left 22-25 36 mm 30A14/23L 23 cm / 310 g right 22-25 36 mm 30A14/23R 24 cm / 330 g left 22-25 38 mm 30A14/24L 24 cm / 330 g right 22-25 38 mm 30A14/24R 25 cm / 370 g left 22-25 40 mm 30A14/25L 25 cm / 370 g right 22-25 40 mm 30A14/25R 26 cm / 430 g left 26-30 40 mm 30A14/26L 26 cm / 430 g right 26-30 40 mm 30A14/26R 27 cm / 470 g left 26-30 40 mm 30A14/27L 27 cm / 470 g right 26-30 40 mm 30A14/27R 28 cm / 500 g left 26-30 42 mm 30A14/28L 28 cm / 500 g right 26-30 42 mm 30A14/28R 29 cm / 550 g left 26-30 42 mm 30A14/29L 29 cm / 550 g right 26-30 42 mm 30A14/29R

Foot without Joint max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 • heel height: 18 mm • foot made of polyurethane • separate alder wood ankle block, bondable • and separate soft heel wedge, bondable

Size Side Item-No. 22 cm left 30A19/22L 22 cm right 30A19/22R 23 cm left 30A19/23L 23 cm right 30A19/23R 24 cm left 30A19/24L 24 cm right 30A19/24R 25 cm left 30A19/25L 25 cm right 30A19/25R 26 cm left 30A19/26L 26 cm right 30A19/26R 27 cm left 30A19/27L 27 cm right 30A19/27R 28 cm left 30A19/28L 28 cm right 30A19/28R 29 cm left 30A19/29L 29 cm right 30A19/29R

For bonding, we recommend item 118P11/T with cross linker/ hardener 118P23. 40 www.streifeneder.com/op Prosthetic Feet Prosthetic Feet

Pirogoff-Foot max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 • heel height 15 mm • foot made of polyurethane • separate alder wood ankle block, bondable

Size Side Item-No. 22 cm left 30A18/22L 22 cm right 30A18/22R 23 cm left 30A18/23L 23 cm right 30A18/23R 24 cm left 30A18/24L 24 cm right 30A18/24R

25 cm left 30A18/25L 25 cm right 30A18/25R 26 cm left 30A18/26L 26 cm right 30A18/26R 27 cm left 30A18/27L 27 cm right 30A18/27R 28 cm left 30A18/28L 28 cm right 30A18/28R 29 cm left 30A18/29L 29 cm right 30A18/29R

For bonding, we recommend item 118P11/T with cross linker/ hardener 118P23.

www.streifeneder.com/op 41 Prosthetic Feet Prosthetic Feet

S.A.C.H. Foot for Men with Split Toe, integrated max. 95 kg heel wedge

• max. patient weight: 80 kg = size 22-25 • max. patient weight: 95 kg = size 26-30 • activity level (walky): 1 to 2 • heel height: 10 mm ± 2 mm • with split toe • with integrated heel wedge • foot made of polyurethane • core made of alder wood with bushing • heel is ﬂat-convex • ﬂat forefoot for simple alignment

Size / weight Side Thread Height Item-No. 22 cm / 290 g left M10 70 mm 30A23/22L 22 cm / 290 g right M10 70 mm 30A23/22R 23 cm / 350 g left M10 70 mm 30A23/23L 23 cm / 350 g right M10 70 mm 30A23/23R 24 cm / 380 g left M10 70 mm 30A23/24L 24 cm / 380 g right M10 70 mm 30A23/24R 25 cm / 420 g left M10 75 mm 30A23/25L 25 cm / 420 g right M10 75 mm 30A23/25R 26 cm / 480 g left M10 75 mm 30A23/26L 26 cm / 480 g right M10 75 mm 30A23/26R 27 cm / 520 g left M10 75 mm 30A23/27L 27 cm / 520 g right M10 75 mm 30A23/27R 28 cm / 580 g left M10 80 mm 30A23/28L 28 cm / 580 g right M10 80 mm 30A23/28R 29 cm / 640 g left M10 80 mm 30A23/29L 29 cm / 640 g right M10 80 mm 30A23/29R 30 cm / 700 g left M10 80 mm 30A23/30L 30 cm / 700 g right M10 80 mm 30A23/30R

42 www.streifeneder.com/op Prosthetic Feet Prosthetic Feet

S.A.C.H. Foot for Men with Split Toe max. 95 kg • max. patient weight: 80 kg = size 22-25 • max. patient weight: 95 kg = size 26-30 • activity level (walky): 1 to 2 • heel height: 10 mm ± 2 mm • with split toe • foot made of polyurethane • core made of alder wood with bushing • ﬂat forefoot for simple alignment

Size / weight Side Thread Height Item-No. 22 cm / 300 g left M10 70 mm 30A24/22L 22 cm / 300 g right M10 70 mm 30A24/22R 23 cm / 365 g left M10 70 mm 30A24/23L 23 cm / 365 g right M10 70 mm 30A24/23R 24 cm / 400 g left M10 70 mm 30A24/24L 24 cm / 400 g right M10 70 mm 30A24/24R 25 cm / 445 g left M10 75 mm 30A24/25L 25 cm / 445 g right M10 75 mm 30A24/25R 26 cm / 500 g left M10 75 mm 30A24/26L 26 cm / 500 g right M10 75 mm 30A24/26R 27 cm / 535 g left M10 75 mm 30A24/27L 27 cm / 535 g right M10 75 mm 30A24/27R 28 cm / 600 g left M10 80 mm 30A24/28L 28 cm / 600 g right M10 80 mm 30A24/28R 29 cm / 670 g left M10 80 mm 30A24/29L 29 cm / 670 g right M10 80 mm 30A24/29R 30 cm / 730 g left M10 80 mm 30A24/30L 30 cm / 730 g right M10 80 mm 30A24/30R

www.streifeneder.com/op 43 Prosthetic Feet Prosthetic Feet

S.A.C.H. Foot for Men with Split Toe max. 95 kg • max. patient weight: 80 kg = size 22-25 • max. patient weight: 95 kg = size 26-30 • activity level (walky): 1 to 2 • colour: dark brown • heel height: 10 mm ± 2 mm • with split toe • foot made of polyurethane • core made of alder wood with bushing • ﬂat forefoot for simple alignment

Size / weight Side Thread Height Item-No. 22 cm / 300 g left M10 70 mm 30A25/22L 22 cm / 300 g right M10 70 mm 30A25/22R 23 cm / 365 g left M10 70 mm 30A25/23L 23 cm / 365 g right M10 70 mm 30A25/23R 24 cm / 400 g left M10 70 mm 30A25/24L 24 cm / 400 g right M10 70 mm 30A25/24R 25 cm / 445 g left M10 75 mm 30A25/25L 25 cm / 445 g right M10 75 mm 30A25/25R 26 cm / 500 g left M10 75 mm 30A25/26L 26 cm / 500 g right M10 75 mm 30A25/26R 27 cm / 535 g left M10 75 mm 30A25/27L 27 cm / 535 g right M10 75 mm 30A25/27R 28 cm / 600 g left M10 80 mm 30A25/28L 28 cm / 600 g right M10 80 mm 30A25/28R 29 cm / 670 g left M10 80 mm 30A25/29L 29 cm / 670 g right M10 80 mm 30A25/29R 30 cm / 730 g left M10 80 mm 30A25/30L 30 cm / 730 g right M10 80 mm 30A25/30R

44 www.streifeneder.com/op Prosthetic Feet Prosthetic Feet

S.A.C.H.-Foot for Men with ultra-reinforced max. 100 kg technical polymer core

• max. patient weight 100 kg • activity level (walky): 1 to 2 • with split toe, with ultra-reinforced technical polymer core • foot made of polyurethane • ﬂat forefoot with heel for simple alignment • suitable for bathing/swimming prostheses

Size / weight Side Thread Height Item-No. 22 / 360 g left M10 70 mm 30A30/22L 22 / 360 g right M10 70 mm 30A30/22R 23 / 390 g left M10 70 mm 30A30/23L 23 / 390 g right M10 70 mm 30A30/23R 24 / 440 g left M10 70 mm 30A30/24L 24 / 440 g right M10 70 mm 30A30/24R 25 / 500 g left M10 75 mm 30A30/25L 25 / 500 g right M10 75 mm 30A30/25R 26 / 540 g left M10 75 mm 30A30/26L 26 / 540 g right M10 75 mm 30A30/26R 27 / 570 g left M10 75 mm 30A30/27L 27 / 570 g right M10 75 mm 30A30/27R 28 / 670 g left M10 80 mm 30A30/28L 28 / 670 g right M10 80 mm 30A30/28R 29 / 700 g left M10 80 mm 30A30/29L 29 / 700 g right M10 80 mm 30A30/29R

S.A.C.H.-Foot for Men with ultra-reinforced max. 100 kg technical polymer core

• max. patient weight 100 kg • activity level (walky): 1 to 2 • with ultra-reinforced technical polymer core • foot made of polyurethane • ﬂat forefoot with heel for simple alignment • suitable for bathing/swimming prostheses

Size / weight Side Thread Height Item-No. 23 / 400 g left M10 70 mm 30A31/23L 23 / 400 g right M10 70 mm 30A31/23R 24 / 450 g left M10 70 mm 30A31/24L 24 / 450 g right M10 70 mm 30A31/24R 25 / 500 g left M10 75 mm 30A31/25L 25 / 500 g right M10 75 mm 30A31/25R 26 / 550 g left M10 75 mm 30A31/26L 26 / 550 g right M10 75 mm 30A31/26R 27 / 600 g left M10 75 mm 30A31/27L 27 / 600 g right M10 75 mm 30A31/27R 28 / 650 g left M10 80 mm 30A31/28L 28 / 650 g right M10 80 mm 30A31/28R

www.streifeneder.com/op 45 Prosthetic Feet Prosthetic Feet

S.A.C.H. Foot Adapter -Aluminum-

• complete with bolted connection • steel screw

Weight Thread Eff. height max.2kg Item-No. 78 g M8 9 mm 100 kg 16A1/M8 92 g M10 9 mm 100 kg 16A1/M10

For bonding the adapter we recommend item 118P32.

S.A.C.H. Foot Adapter -Titanium-

• complete with bolted connection • screw M8/titanium • screw M8/steel

Weight Thread Eff. height max.2kg Item-No. 64 g M8 9 mm 100 kg 16A6/M8 71 g M10 9 mm 175 kg 16A6/M10

For bonding the adapter we recommend item 118P32.

S.A.C.H. Foot Adapter -Stainless Steel-

• complete with bolted connection • stainless steel • steel screw • S.A.C.H foot adapter 16A9/M10 is exclusively for the S.A.C.H. foot 30A150 for men

Weight Thread Eff. height max.2kg Item-No. 118 g M8 9 mm 100 kg 16A2/M8 128 g M10 9 mm 125 kg 16A2/M10 133 g M10 9 mm 150 kg 16A9/M10

For bonding the adapter we recommend item 118P23.

S.A.C.H. Foot Adapter -Titanium-

• modular system oversize for 225 kg • for adapter with large adjustment core • complete with screwing • steel screw with ﬁne thread M14x1,5 • usage only in combination with screw adapter 11A225/T

Material Weight Eff. height max.2kg Item-No. Titanium 194 kg 9 mm 225 kg 16A7/M14

Modular system for 225 kg! For bonding the adapter we recommend article 118P32.

46 www.streifeneder.com/op Prosthetic Feet Prosthetic Feet

Bolted Connection for S.A.C.H. Foot

• consists of: 1 socket cap screw, 1 washer, 1 serrated lock washer

For adapter Material Thread Item-No. 16A2/M8 Steel M8 16A2/E8 16A2/M10 Steel M10 16A2/E10

S.A.C.H. Foot Connection Disc

• made of plastic • to be bonded to cosmetic soft foam cover and afﬁxed onto the S.A.C.H. foot adapter

S.a.c.h. foot adapter Weight Item-No. 16A1/M8 12 g 29A1 16A1/M10 12 g 16A2/M8 12 g 16A2/M10 12 g 16A6/M8 12 g 16A6/M10 12 g

For bonding we recommend 118P12.

Single-Axis-Foot Adapter -Aluminum-

• with lower bearing shell, plantar ﬂexion bumper and including a dorsal ﬂexion bumper 32A6/D10

Foot size Weight Eff. height max.2kg Item-No. 22-25 cm 207 g 33 mm 100 kg 32A2/22-25 26-30 cm 218 g 33 mm 100 kg 32A2/26-30

The adjustment of the heel height and of the dorsal ﬂexion can be varied with different dorsal ﬂexion bumpers like 32A1/D12 and 32A1/D14.

Single-Axis-Foot Adapter -Titanium-

• with lower bearing shell, plantar ﬂexion bumper and including a dorsal ﬂexion bumper 32A6/D5

Foot size Weight Eff. height max.2kg Item-No. 22-25 cm 199 g 27 mm 100 kg 32A3/22-25 26-30 cm 208 g 27 mm 100 kg 32A3/26-30

The adjustment of the heel height and of the dorsal ﬂexion can be varied with different dorsal ﬂexion bumpers like 32A1/D10 and 32A1/D12.

www.streifeneder.com/op 47 Prosthetic Feet Prosthetic Feet

Single-Axis-Foot Adapter -Steel-

• with lower bearing shell, plantar ﬂexion bumper and including a dorsal ﬂexion bumper 32A6/D5

Foot size Weight Eff. height max.2kg Item-No. 22-25 cm 305 g 27 mm 100 kg 32A4/22-25 26-30 cm 320 g 27 mm 100 kg 32A4/26-30

The adjustment of the heel height and of the dorsal ﬂexion can be varied with different dorsal ﬂexion bumpers like 32A1/D10 and 32A1/D12.

Dorsal Flexion Bumper

• for single-axis-foot adapter 32A2, 32A3 and 32A4 • for adjustment of heel height and dorsal ﬂexion • each size 1 soft and 1 hard bumper

Foot size Height Flexion Item-No. 22-30 cm 5 mm soft + hard 32A6/D5 22-30 cm 10 mm soft + hard 32A6/D10

Connection Cap

• for single-axis-foot adapter • made of plastic with slot for easier insertion • suitable for 32A2, 32A3 and 32A4

Foot size Weight Item-No. 22 cm 10 g 32A5/22 23 cm 11 g 32A5/23 24 cm 12 g 32A5/24 25 cm 13 g 32A5/25 26 cm 14 g 32A5/26 27 cm 15 g 32A5/27 28 cm 16 g 32A5/28 29 cm 17 g 32A5/29

Bond to cosmetic soft foam cover with Listra Fix Adhesive 118P12 and clip on foot.

Service Parts Set

• for single-axis-foot adapter 32A2, 32A3 and 32A4

Set consists of Item-No. 1 x two-hole steel washer, oval 32A6/E 1 x lower bearing shell 1 x plantar flexion bumper - soft, green 1 x plantar flexion bumper - medium, red 1 x plantar flexion bumper - hard, blue

48 www.streifeneder.com/op Prosthetic Feet Prosthetic Feet

Bearing Seat

• for single-axis-foot adapter 32A2, 32A3 and 32A4

Item-No. 32A2/E4

Universal Foot Adapter -Steel-

• complete for single-axis feet • effective height (EH) incl. thread length • use in connection with ankle block 31A3 and 31A4 • maintenance-free

Foot size Weight Eff. height max.2kg Item-No. 23 - 30 cm 195 g 97 mm 100 kg 32A1

Please order the dorsal ﬂexion bumper 32A1/D and the plantar ﬂexion bumper 32A1/F separately.

Connection Cap

• for single-axis-feet • consisting of polyurethane • ﬁts snugly onto the standard joint

Foot size Item-No. 23 - 24 cm 32A11/2-3 25 - 26 cm 32A11/4-5 27 - 28 cm 32A11/6-7

Dorsal Flexion Bumper

• for single-axis-foot adapter 32A1/23-30 • and for universal foot adapter 32A1 • in connection with ankle block 31A3 and 31A4 for adjustment of heel height and dorsal ﬂexion

Flexion Height Item-No. less 10 mm 32A1/D10 standard 12 mm 32A1/D12 more 14 mm 32A1/D14

www.streifeneder.com/op 49 Prosthetic Feet Prosthetic Feet

Plantar Flexion Bumper

• for single-axis-foot adapter 32A1/23-30 • and for universal foot adapter 32A1 • made of rubber

Foot size Diameter Item-No. 22 - 25 cm 23 mm 32A1/F23 26 - 30 cm 27 mm 32A1/F27

50 www.streifeneder.com/op Prosthetic Feet Prosthetic Feet

Ankle Block -Wood-

• complete with bolted connection in steel • suitable for left and right side • spare socket cap screw M8 x 90 mm, steel 22A2/M8 • spare socket cap screw M10 x 90 mm, steel 22A2/M10

Foot size Thread Height max.2kg Item-No. up to 25 cm M8 x 90 mm 118 mm 100 kg 31A2/M8 with M8 up to 28 cm M10 x 90 mm 118 mm 100 kg 31A2/M10 with M10

Suitable for all S.A.C.H. feet and all dynamic feet.

Ankle Block -PUR- light

• max. patient weight: 100 kg • complete with bolted connection in steel • suitable for left and right side • spare socket cap screw M8, zinc-plated 90 mm 22A2/M8 • spare socket cap screw M10, zinc-plated 90 mm 22A2/M10

Foot size Thread Height max.2kg Item-No. up to 25 cm M8 x 90 mm 116 mm 100 kg 31A1/M8 with M8 up to 28 cm M10 x 90 mm 116 mm 100 kg 31A1/M10 with M10 up to 30 cm M10 x 90 mm 116 mm 100 kg 31A1/M10L with M10

Suitable for all S.A.C..H. feet and for all dynamic feet.

Bolted Connection Set

• for ankle block 31A1 and 31A2 • consists of: 1 drive-in nut, 1 hex socket cap screw (22A2/M8 or 22A2/M10), 1 x washer

Material Weight Thread x length Item-No. Steel 45 g M8 x 85 mm 31A1/E8 Steel 65 g M10 x 90 mm 31A1/E10

Socket Cap Screw -Titanium-

• suitable for 31A1 and 31A2 • for weight reduction

Material Weight Thread x length Item-No. Titanium 25 g M8 x 85 mm 22A3/8x85 Titanium 35 g M10 x 90 mm 22A3/10x90

www.streifeneder.com/op 51 Prosthetic Feet Prosthetic Feet

Ankle Block -PUR- Light

• for all single-axis feet • use in connection with a universal foot adapter 32A1

Foot size Side Height max.2kg Item-No. 22 cm left 155 mm 100 kg 31A4/22L 22 cm right 155 mm 100 kg 31A4/22R 23 cm left 155 mm 100 kg 31A4/23L 23 cm right 155 mm 100 kg 31A4/23R 24 cm left 155 mm 100 kg 31A4/24L 24 cm right 155 mm 100 kg 31A4/24R 25 cm left 155 mm 100 kg 31A4/25L 25 cm right 155 mm 100 kg 31A4/25R 26 cm left 155 mm 100 kg 31A4/26L 26 cm right 155 mm 100 kg 31A4/26R 27 cm left 155 mm 100 kg 31A4/27L 27 cm right 155 mm 100 kg 31A4/27R 28 cm left 155 mm 100 kg 31A4/28L 28 cm right 155 mm 100 kg 31A4/28R

Ankle Block -Wood-

• with enclosed nylon bushing • for all single-axis feet • use in connection with a universal foot adapter 32A1

Foot size Side Height max.2kg Item-No. 22 cm left 152 mm 100 kg 31A3/22L 22 cm right 152 mm 100 kg 31A3/22R 23 cm left 152 mm 100 kg 31A3/23L 23 cm right 152 mm 100 kg 31A3/23R

24 cm left 152 mm 100 kg 31A3/24L 24 cm right 152 mm 100 kg 31A3/24R 25 cm left 152 mm 100 kg 31A3/25L 25 cm right 152 mm 100 kg 31A3/25R 26 cm left 152 mm 100 kg 31A3/26L 26 cm right 152 mm 100 kg 31A3/26R 27 cm left 152 mm 100 kg 31A3/27L 27 cm right 152 mm 100 kg 31A3/27R 28 cm left 152 mm 100 kg 31A3/28L 28 cm right 152 mm 100 kg 31A3/28R

Ankle Block -Wood-

• for all S.A.C.H. and dynamic feet • without bolted connection • suitable for right and left side

Foot size Height max.2kg Item-No. 22 - 25 cm 136 mm 100 kg 31A5/22-25 26 - 30 cm 136 mm 100 kg 31A5/26-30

52 www.streifeneder.com/op Prosthetic Feet Prosthetic Feet

Bolted Connection Set, M8

• for all dynamic and S.A.C.H. feet with M8 thread • for ankle block 31A5/22-25 • consisting of 1 hex socket cap screw 22A2/M8, 1 thread bushing, 1 washer, 1 lockwasher 16A8/M8F

Material Weight Thread x length Item-No. Steel 70 g M8 x 90 mm 31A6/M8

Bolted Connection Set, M10

• for all dynamic and S.A.C.H. feet with M10 thread • for ankle block 31A5 • consisting of 1 hex socket cap screw 22A2/M10, 1 thread bushing, 1 washer, 1 lockwasher 16A8/M10F

Material Weight Thread x length Item-No. Steel 90 g M10 x 90 mm 31A6/M10

www.streifeneder.com/op 53

Modular Structural Parts Modular Structural Parts Modular Structural Modular Structural Parts

Even complicated residual limb positions are easy to supply, moreover there are manifold options to do so. We offer a wide variety of elaborate modular structural parts that enable you to align functional and modern prostheses.

For many years now, our staff members have been developing parts that are 100 % made by Streifeneder. The realization of the initial idea up to the finished product takes place in our own production facilities and of course correspondes to current ISO-standards. Our modular structural parts are made of different top quality material alloys. Depending on the individual requirements, they are able to offer a maximum amount of safety to the amputee. This fact and continuing further development of the geometrics with state-of-the-art technical equipment enabled us to manufacture modular structural components even for heavy-weight patients. Through adjusting screws and pyramid connections the alignment and the statics of a prosthesis can be individually determined. The great variety of different adapters and their combination potential offers the orthopaedic technician a maximum of flexibility when aligning a prosthesis.

Please do not allow the torque wrench to click more Each structural part of the Streifeneder than once – further tightening will increase the torque, which may result in damaging the modular ortho.production is marked with a serial number. component. Release the torque wrench after tightening. Please bear in mind that once a year the This facilitates the quality management of our torque wrench has to be recalibrated according to ISO certification standards. We would be glad to customers and allows for a comprehensible and offer you this service. continuous documentation. Modular Structural Parts

Prosthetic care for heavy-weight users The Heavy-Duty-Line by Streifeneder ortho.production GmbH contains components for bodyweight of up to max. 225 kg and helps heavy-weight people to regain their mobility. With these structural parts, the orthopaedic technician can effect even difficult prosthetic care while trusting in excellent quality in all aspects.

Features • Prosthetic care for users with body weight of up to 225 kg (496 lbs) • Low construction weight plus maximum rigidness due to high quality titanium and aluminium • Consistently excellent quality “made by Streifeneder ortho.production” • Approved according to ISO 10328 standards

We offer useful product solutions even for difficult prosthetic cases. Due to a special titanium alloy, we are able to provide a complete range of structural components for weight load of up to 175 kg. This enables the orthopaedic technician to provide all necessary components to patients with higher body weight. The components are compatible with all structural components by Streifeneder ortho.production GmbH. • Up to max. body weight of 175 kg, including carried and supported loads • Made from titanium • Especially sturdy by special surface treatment • Prosthetic care even for complicated cases Modular Structural Parts

In order to support the orthopaedic technician when determining the effective system height of a prosthesis, Streifeneder ortho.production has developed a simple system to establish the assembly height. For this purpose, you will ﬁnd the assembly height of each individual component on the following pages.

In order to make the system as simple as possible, the assembly height of most components corresponds to the visible height when installed. An exception to this general rule are components with tube clamp adapters, where the assembly height is the total height of the component minus the depth of penetration of the tube.

If a component equipped with pyramidal connector plunges into an adapter, the assembly height is calculated up to the visible middle of the calotte.

5 mm 9 mm

When using components with adjusting core, the total height is equal to the assembly height because the component is entirely visible when installed.

60 mm

In the case of tubes, the total length is taken to calculate the assembly height.

500 mm

For screw adapters with tube clamp adapters, where the assembly height is the total height of the adapter minus the depth of penetration of the tube.

14 mm

Adding up the individual assembly heights results in the system height of the prosthesis (as depicted in the example on the opposite page). 10A21 Try our free tool for the composition of a prosthesis, the PRO.create software. 8 mm For more information, please visit www.streifeneder.com/op

10A23

5 mm

10A50/S60

60 mm

3A810

120 mm

28A2/500

500 mm

11A11

14 mm

16A2

9 mm

30A27

80 mm

Total height: 796 mm Modular Structural Parts Modular Structural Parts

Tube Adapter -Stainless Steel-, Ø 34 mm

• with light metal tube Ø 34 x 2 mm • silver anodised • with 4 set screws 22A2/M8x14 zinc-plated

Tube ø Weight Eff. height max.2kg Item-No. 34 mm 250 g min. 100 mm 150 kg 150A3/S200 max. 215 mm 34 mm 360 g min. 100 mm 150 kg 150A3/S400 max. 415 mm

Tube Adapter -Titanium-, Ø 34 mm

• with light alloy tube Ø 34 x 2 mm • silver anodised • with 4 set screws 22A2/M8x14 zinc-plated

Tube ø Weight Eff. height max.2kg Item-No. 34 mm 215 g min. 100 mm 150 kg 150A4/T225 max. 215 mm 34 mm 330 g min. 100 mm 150 kg 150A4/T445 max. 415 mm

Light Alloy Tube, Ø 34 mm

• light alloy tube Ø 34 x 6 mm • silver anodised • suitable for adapters with tube holder Ø 34 mm

Material Length Weight max.2kg Item-No. Aluminum 300 mm 460 g 225 kg 28A3/A300

Modular system for 225 kg!

www.streifeneder.com/op 61 Modular Structural Parts Modular Structural Parts

Tube Adapter -Aluminium-, Ø 30 mm

• with light alloy tube Ø 30 x 2 mm • grey anodised • with 4 adjustment set screws 22A2/M8x14, zinc-plated

Tube ø Weight Eff. height max.2kg Item-No. 30 mm 140 g min. 78 mm 100 kg 15A2/A200 max. 213 mm 30 mm 230 g min. 78 mm 100 kg 15A2/A400 max. 413 mm

Tube Adapter -Titanium-, Ø 30 mm

• with light alloy tube Ø 30 x 2 mm • grey anodised • with 4 adjustment set screws 22A2/M8x12, zinc-plated • * only for activity level 1 to 3, 150 kg for all activity levels

Tube ø Weight Eff. height max.2kg Item-No. 30 mm 160 g min. 78 mm 175 kg 15A4/T225 max. 213 mm 30 mm 260 g min. 78 mm 175 kg* 15A4/T445 max. 413 mm

Tube Adapter -Stainless Steel-, Ø 30 mm

• with light alloy tube Ø 30 x 2 mm • grey anodised • with 4 adjustment set screws 22A2/M8x14, zinc-plated

Tube ø Weight Eff. height max.2kg Item-No. 30 mm 190 g min. 78 mm 125 kg 15A3/S200 max. 213 mm 30 mm 310 g min. 78 mm 125 kg 15A3/S400 max. 413 mm

62 www.streifeneder.com/op Modular Structural Parts Modular Structural Parts

Light Alloy Tube, Ø 30 mm

• grinded surface • Ø 30 x 2 mm • grey anodised

Length Weight max.2kg Item-No. 500 mm 250 g 100 kg 28A2/A500

Rotary Adapter

• guarantees permanent backlash-freedom due to its new locking mechanism - even under continuously high and changing loads • with the rotary adapter, rotating of the lower leg is possible in ﬂexed as well as in extended position • additional comfort for the patient • rotation: 360° • automatically re-locks into place • the rotary adapter 10A16/S is not approved for use in hip disarticulation prostheses

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 193 g 25 mm 125 kg 10A16/S

Frequently repeated every-day motions such as putting on shoes or getting into a car are therefore considerably easier.

Tube Adapter, short, Ø 30 mm

• with 4 adjustment set screws 22A2/M8x14, zinc-plated • connection Ø 30 mm • for high stress • for very short below knee prostheses, reduceable to 57 mm

Material Weight Eff. height max.2kg Item-No. Aluminum 93 g min. 57 mm 100 kg 15A5/A100 Titanium 138 g min. 57 mm 125 kg 15A5/T100 Stainl. Steel 230 g min. 57 mm 150 kg 15A5/S100

Tube Adapter, rotatable, Ø 30 mm

• with 4 adjustment set screws 22A2/M8x12, zinc-plated • connection: Ø 30 mm • in combination with 11A11, 10A42 or 3A40 • for minimal length compensation of 7 mm • for rotation adjustment

Material Weight Eff. height max.2kg Item-No. Aluminum 52 g 46 mm 100 kg 11A13/A Titanium 70 g 46 mm 125 kg 11A13/T Stainl. Steel 98 g 46 mm 150 kg 11A13/S

www.streifeneder.com/op 63 Modular Structural Parts Modular Structural Parts

Tube Clamp Adapter-Titanium-, Ø 34 mm

• total height 55 mm • for tubes with Ø 34 mm • adjustment core adapter suitable for standard modular system • with 4 adjusting screws 22A2/M8x12mm, zinc-plated

Material Weight Eff. height max.2kg Item-No. Titanium 131 g 16 mm 225 kg 11A250/T

Modular system up to max. 225 kg - with straight, non-adjustable construction!

Tube Clamp Adapter -Titanium-, Ø 34 mm

• total height 55 mm • tube clamp Ø 34 mm and large adjustment core adapter • adjustment core adapter exclusively suitable for S.A.C.H. foot adapter 16A7/M14 and socket adapter 10A7/T • with 4 adjustment set screws 22A2/M10x16

Material Weight Eff. height max.2kg Item-No. Titanium 167 g 21 mm 225 kg 11A225/T

Modular system for 225 kg!

Tube Clamp Adapter, Ø 34 mm

• total height 53 mm • for tubes with Ø 34 mm • with 4 set screws 22A2/M8x12 zinc-plated • complete with clamping unit 11A125/E

Material Weight Eff. height max.2kg Item-No. Titanium 88 g 14 mm 125 kg 11A125/T Stainl. Steel 136 g 14 mm 125 kg 11A125/S

Service Parts Set for Clamping Unit, Ø 34 mm

• complete for all tube adapters with clamping unit Ø 34 mm • consisting of: clamp pin, clamp pin with thread, socket cap screw

For adapter Colour Item-No. Titanium black 11A125/E1 Stainl. Steel white 11A125/E2

64 www.streifeneder.com/op Modular Structural Parts Modular Structural Parts

Tube Clamp Adapter, Ø 30 mm

• total height 47 mm • for tubes Ø 30 mm • with 4 adjustment set screws 22A2/M8x14, zinc-plated for 11A11/A • with 4 adjustment set screws 22A2/M8x12, zinc-plated for 11A11/T and 11A11/S • and complete clamping unit 11A11/E1

Material Weight Eff. height max.2kg Item-No. Aluminum 62 g 14 mm 100 kg 11A11/A

Titanium 70 g 14 mm 175 kg 11A11/T Stainl. Steel 120 g 14 mm 125 kg 11A11/S

Tube Clamp Adapter, Ø 30 mm

• total height 47 mm • for tubes with Ø 30 mm • with 4 adjustment set screws 22A2/M8x12, zinc-plated

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 135 g 14 mm 125 kg 11A17/S Titanium 82 g 14 mm 175 kg 11A17/T

Tube Clamp Adapter,10° tilt, Ø 30 mm

• total height 55 mm • for tubes Ø 30 mm • in connection with modular hip joint 7A4 and 7A5 • with 4 adjustment set screws 22A2/M8x12, zinc-plated • and complete clamping unit 11A11/E

Material Weight Eff. height max.2kg Item-No. Aluminum 63 g 21 mm 75 kg 11A12/A Titanium 75 g 21 mm 100 kg 11A12/T Stainl. Steel 125 g 21 mm 125 kg 11A12/S

Tube Clamp Adapter, 20° tilt, Ø 30 mm

• destined exclusively for prosthetic supplies of the lower extremities • recommended for larger pelvic baskets • total height 58 mm • for tubes Ø 30 mm • in connection with modular hip joint 7A5 • with 4 adjustment set screws 22A2/M8x12, zinc-plated • and complete clamping unit 11A11/E

Material Weight Eff. height max.2kg Item-No. Titanium 80 g 24 mm 100 kg 11A20/T

www.streifeneder.com/op 65 Modular Structural Parts Modular Structural Parts

Tube Clamp Adapter with Adjustment Core, Ø 30 mm

• total height 55 mm • tube clamp adapter Ø 30 mm • and complete clamping unit 11A11/E

Material Weight Eff. height max.2kg Item-No. Aluminum 70 g 6 mm 100 kg 11A15/A Titanium 72 g 6 mm 100 kg 11A15/T Stainl. Steel 115 g 6 mm 125 kg 11A15/S

Service Parts Set for Clamping Unit Ø 30 mm

• complete for all tube adapters with clamping unit Ø 30 mm • consists of: clamp pin, clamp pin with thread, socket cap screw

For adapter Colour Item-No. Aluminum or Titanium black 11A11/E1 Stainl. Steel white 11A11/E2

Slide Adapter with Lamination Anchor

• for direct lamination into below knee prostheses for connection with S.A.C.H. feet adapter • for additional translational adjustment • with 4 adjustment set screws 22A2/M8x12, zinc-plated • with tensioning screw 22A2/M6x30 (for aluminum adapter) • adjustment range: aluminum +/- 9 mm, titanium +/- 11mm

Material Weight Eff. height max.2kg Item-No. Aluminum 135 g 49 mm 75 kg 10A41/A

Titanium 183 g 49 mm 100 kg 10A41/T

Silicone Dummy

• for adapters 10A41/A and 10A41/T • protects the dovetail guide when laminating • no plastiline necessary

Item-No. 10A41/AE3 10A41/TE3

66 www.streifeneder.com/op Modular Structural Parts Modular Structural Parts

Slide Adapter with Adjustment Core -Titanium-

• to be directly laminated in for tibial prostheses • for additional translamination adjustments • adjustment range: +/- 11 mm • silicone dummy 10A41/TE3 not included

Material Weight Eff. height max.2kg Item-No. Titanium 189 g 32 mm 100 kg 10A46/T

Slide Adapter, Ø 30 mm

• total height 10A42/A = 72 mm • total height 10A42/T = 68 mm • for direct mount on tube adapter • for additional translational adjustment • 10A42/A: with 4 adjustment set screws 22A2/M8x14, zinc-plated • 10A42/T: with 4 adjustment set screws 22A2/M8x12, zinc-plated; activity level (walky): 3 • with tensioning screw 22A2/M6x30 (for aluminum adapter) • adjustment range: aluminum +/- 9 mm, titanium +/- 11mm

Material Weight Eff. height max.2kg Item-No. Aluminum 137 g 39 mm 75 kg 10A42/A Titanium 185 g 35 mm 175 kg 10A42/T

Slide Adapter -Titanium-, Ø 34 mm

• total height 76 mm • for direct mount on tube adapter • for additional translational adjustment • with clamping unit 11A125/E1 • with 4 adjustment set screws 22A2/M8x12, zinc-plated • with 2 tensioning screws 22A3/M6x8 • adjustment range +/-11 mm

Material Weight Eff. height max.2kg Item-No. Titanium 168 g 34 mm 125 g 100A42/T

Slide Adapter -Aluminum-

• above and below with 4 adjustment set screws 22A2/M8x12 zinc-plated • for connection between two adjustment cores • for distal and proximal change of angle • with additional translation adjustment • adjustment range: +/-9 mm

Material Weight Eff. height max.2kg Item-No. Aluminum 155 g 60 mm 75 kg 10A43/A60 Aluminum 165 g 75 mm 75 kg 10A43/A75

www.streifeneder.com/op 67 Modular Structural Parts Modular Structural Parts

Slide Adapter -Titanium-

Material Weight Eff. height max.2kg Item-No. Titanium 214 g 60 mm 100 kg 10A43/T60 Titanium 224 g 75 mm 100 kg 10A43/T75

Slide Adapter with two Adjustment Cores

• for connection between two tube clamp adapters • for distal and proximal change of angle • with additional translation adjustment • adjustment range: aluminum +/- 9 mm, titanium +/- 11 mm

Material Weight Eff. height max.2kg Item-No. Aluminum 158 g 36 mm 75 kg 10A45/A Titanium 150 g 22 mm 100 kg 10A45/T

68 www.streifeneder.com/op Modular Structural Parts Modular Structural Parts

Double Adapter -Aluminum-

• above and below with 4 adjustment set screws 22A2/M8x12 zinc-plated • connection between two adjustment cores • for distal and proximal change of angle

Material Weight Eff. height max.2kg Item-No. Aluminum 60 g 32 mm 100 kg 10A50/A32 Aluminum 63 g 36 mm 100 kg 10A50/A36 Aluminum 66 g 40 mm 100 kg 10A50/A40 Aluminum 70 g 45 mm 100 kg 10A50/A45 Aluminum 73 g 50 mm 100 kg 10A50/A50 Aluminum 76 g 55 mm 100 kg 10A50/A55 Aluminum 79 g 60 mm 100 kg 10A50/A60 Aluminum 82 g 65 mm 100 kg 10A50/A65 Aluminum 85 g 70 mm 100 kg 10A50/A70 Aluminum 90 g 75 mm 100 kg 10A50/A75

Double Adapter -Titanium-

• above and below with 4 adjustment set screws 22A2/M8x12 zinc-plated • connection between two adjustment cores • for distal and proximal change of angle

Material Weight Eff. height max.2kg Item-No. Titanium 82 g 32 mm 125 kg 10A50/T32 Titanium 96 g 45 mm 125 kg 10A50/T45 Titanium 108 g 60 mm 125 kg 10A50/T60 Titanium 122 g 75 mm 125 kg 10A50/T75

Double Adapter -Stainless Steel-

• above and below with 4 adjustment set screws 22A2/M8x12 zinc-plated • connection between two adjustment cores • for distal and proximal change of angle

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 114 g 32 mm 150 kg 10A50/S32 Stainl. Steel 139 g 45 mm 150 kg 10A50/S45 Stainl. Steel 162 g 60 mm 150 kg 10A50/S60 Stainl. Steel 194 g 75 mm 150 kg 10A50/S75

www.streifeneder.com/op 69 Modular Structural Parts Modular Structural Parts

Sliding Plate -Aluminum-

• use only during test runs within the orthopaedic workshop • application into the ﬁnal prosthesis is not permitted • the sliding plate can be used up to a maximum body weight of 100 kg • the moving parts of the sliding plate feature Euro connections, adapters with a bolt circle of approx. 51 mm can be screwed in • the threaded holes allow adjustment ranges of 9, 18, 27 or 36 mm • these are possible lateral, medial, as well as anterior and posterior • when using socket adapters with adjusting ring please apply adapter discs (10A96/SE1) for balancing (counter sink screws of various lengths can be chosen; torque of all counter sink screws is 12 Nm)

Material Weight Eff. height max.2kg Item-No. Aluminum 120 g 8 mm 100 kg 10A30/A

Adjusting Device for Modular Prostheses -Aluminum-

• use only during test runs within the orthopaedic workshop • serves as an adjustment aid during ﬁttings • slide possibility in sagital and frontal level • adjustment range: +/- 25 mm with calibration

Material Weight Eff. height max.2kg Item-No. Alum./Steel 260 g 20 mm 100 kg 10A40/A

Vario Test Tube -Aluminum-

• use only during test runs within the orthopaedic workshop • allows continuous height adjustment of the prosthesis during the trial phase • due to its many adapting possibilities, it can be mounted in lots of varieties • adjustable height: 65 mm • proximal outer diameter: Ø 34 mm • distal inner diameter: Ø 30 mm

Material Weight Eff. height max.2kg Item-No. Aluminum 134 g variable 125 kg 10A100/A

70 www.streifeneder.com/op Modular Structural Parts Modular Structural Parts

Double Adapter with Adjustment Core

• 4 adjustment set screws 22A2/M8x12 zinc-plated • for extension of a socket adapter with adjustment core • for distal and proximal change of angle

Material Weight Eff. height max.2kg Item-No. Aluminum 74 g 36 mm 100 kg 11A14/A Titanium 112 g 36 mm 125 kg 11A14/T Stainl. Steel 169 g 36 mm 150 kg 11A14/S

Double Adapter with Two Adjustment Cores

• for connection between two tube clamp adapters • for distal and proximal change of angle

Material Weight Eff. height max.2kg Item-No. Aluminum 78 g 15 mm 100 kg 10A60/A41 Aluminum 92 g 23 mm 100 kg 10A60/A50

Socket Adapter, rotatable, Ø 30 mm

• proximal with adjustment core • distal with connection Ø 30 mm • in combination with 11A11, 10A42 or 3A40 • for length compensation up to 7 mm • for rotation adjustment

Material Weight Eff. height max.2kg Item-No. Titanium 65 g 37 mm 125 kg 11A16/T Stainl. Steel 91 g 37 mm 150 kg 11A16/S

Socket Adapter

• with adjustment core • with center bore Ø 8,5 mm • for connections to different modular components or socket attachments

Material Weight Eff. height max.2kg Item-No. Aluminum 50 g 8 mm 100 kg 10A90/A Titanium 50 g 8 mm 175 kg 10A90/T Stainl. Steel 87 g 8 mm 150 kg 10A90/S

www.streifeneder.com/op 71 Modular Structural Parts Modular Structural Parts

Socket Adapter without Seat Ring -Titanium-

• with adjustment core • with center bore Ø 8,5 mm • use for even connection surfaces

Material Weight Eff. height max.2kg Item-No. Titanium 48 g 8 mm 100 kg 10A90/TF

Socket Adapter, rotatable

• with adjustment core • with center bore Ø 8,5 mm • for connections to different modular components or socket attachments • with additional rotation adjustment (raster adjustment) • replacement pressure plate 10A96/SE1

Material Weight Eff. height max.2kg Item-No. Titanium 70 g 10 mm 100 kg 10A96/T Stainl. Steel 125 g 10 mm 125 kg 10A96/S

Socket Adapter, rotatable

• with adjustment core • with center bore Ø 8,5 mm • for connections to different modular components or socket attachments • continuous rotation adjustment via thread

Material Weight Eff. height max.2kg Item-No. Alum./Titan. 65 g 12 mm 100 kg 10A91/T3 Alum./Steel 98 g 12 mm 100 kg 10A91/S3

Socket Adapter, excentric

• with center bore Ø 8,5 mm • for connections to different modular components or socket attachments • 7 mm axial offset

Material Weight Eff. height max.2kg Item-No. Aluminum 50 g 8 mm 75 kg 10A94/A Titanium 58 g 8 mm 100 kg 10A94/T Stainl. Steel 100 g 8 mm 125 kg 10A94/S

72 www.streifeneder.com/op Modular Structural Parts Modular Structural Parts

Socket Adapter, excentric

• with center bore Ø 8,5 mm • for connections to different modular components or socket attachments • 5 mm diagonal offset

Material Weight Eff. height max.2kg Item-No. Aluminum 50 g 8 mm 75 kg 10A93/A Titanium 62 g 8 mm 100 kg 10A93/T Stainl. Steel 102 g 8 mm 125 kg 10A93/S

Socket Adapter

• with adjustment core support • with 4 adjustment set screws 22A2/M8x12, zinc-plated • for connections to different modular components or socket attachments

Material Weight Eff. height max.2kg Item-No. Aluminum 44 g 16 mm 100 kg 10A92/A Titanium 55 g 16 mm 100 kg 10A92/T Stainl. Steel 88 g 16 mm 125 kg 10A92/S

www.streifeneder.com/op 73 Modular Structural Parts Modular Structural Parts

Socket Adapter with Rotation Adjustment

• with adjustment core support • with 4 adjustment set screws 22A2/M8x12 zinc-plated • for connection of different modular parts or distal socket ends • with additional rotation adjustment (raster adjustment) • replacement pressure plate 10A96/SE1

Material Weight Eff. height max.2kg Item-No. Titanium 76 g 18 mm 175 kg 10A95/T Stainl. Steel 125 g 18 mm 125 kg 10A95/S

Pressure Plate

• replacement for socket adapter 10A96 • 1 mm distance compensation to other modular parts

Material Weight Height Item-No. Stainl. Steel 10 g 1 mm 10A96/SE1

Socket Adapter, rotatable

• with adjustment core support • with 4 adjustment set screws • for connection of different modular parts or distal socket ends • continuous rotation adjustment via M36 inner thread

Material Weight Eff. height max.2kg Item-No. Alum./Titan. 77 g 22 mm 100 kg 10A91/T2 Alum./Steel 106 g 22 mm 100 kg 10A91/S2

Socket Adapter, excentric

• activity level (walky): 1 to 3 • with adjustment core support • with 4 adjustment set screws 22A2/M8x12 zinc-plated • for connection of different modular parts or distal socket ends • 7 mm axial offset

Material Weight Eff. height max.2kg Item-No. Aluminum 42 g 16 mm 75 kg 10A89/A Titanium 55 g 16 mm 100 kg 10A89/T Stainl. Steel 90 g 16 mm 100 kg 10A89/S

74 www.streifeneder.com/op Modular Structural Parts Modular Structural Parts

Socket Adapter

• with adjustment core • for trans-tibial sockets • with wide groove • for direct lamination • with lamination dummy 22A8 • with center bore Ø 8,5 mm

Material Weight Eff. height max.2kg Item-No. Aluminum 57 g 14 mm 100 kg 10A3/A Titanium 48 g 14 mm 175 kg 10A3/T Stainl. Steel 85 g 14 mm 100 kg 10A3/S

Socket Adapter

• with adjustment core support • with adjustment set screws 22A2/M8x12 • with lamination anchor • for trans-tibial sockets • for direct lamination • including of lamination dummy 22A10

Material Weight Eff. height max.2kg Item-No. Aluminum 53 g 24 mm 100 kg 10A6/A Titanium 85 g 24 mm 100 kg 10A6/T Stainl. Steel 130 g 24 mm 100 kg 10A6/S

Lamination Dummy

• for socket adapter 10A6 • for protection of the adjustment core support during the lamination process • with adjustment core marking • no need for plasticine

Material Item-No. Silicone 22A10

Socket Adapter with Adjustment Core -Titanium-

• with adjustment core • overall height: 52 mm • for BK socket • extra wide notch • for direct lamination • adjustment core exclusively suitable for screw adapter 11A225/T

Material Weight Eff. height max.2kg Item-No. Titanium 213 kg 23 mm 225 kg 10A7/T

Modular system for 225 kg!

www.streifeneder.com/op 75 Modular Structural Parts Modular Structural Parts

Socket Adapter

• with adjustment core • max. 10 mm offset • for AK and BK sockets • quick interim socket

Material Weight Eff. height max.2kg Item-No. Aluminum 155 g 14 mm 100 kg 10A44/A

Lamination Dummy

• accessory • for socket adapter 10A44/A • used as deep-drawing or lamination aid

Material Item-No. POM 10A44/D

76 www.streifeneder.com/op Modular Structural Parts Modular Structural Parts

Socket Adapter -Stainless Steel-

• with adjustment core and lamination anchor • for direct lamination into trans-femoral sockets • with lamination dummy 22A8

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 118 g 12 mm 150 kg 10A5/S

Socket Adapter, rotatable

• with adjustment core and lamination anchor • for direct lamination into trans-femoral sockets • with center bore Ø 8,5 mm • continuous rotation adjustment possible • including socket cap screw 22A2/M5x30

Material Weight Eff. height max.2kg Item-No. Titanium/Steel 147 g 13 mm 100 kg 10A1/TS Stainl. Steel 170 g 13 mm 125 kg 10A1/S

Please order our Lamination Dummy 22A9 separately!

Socket Adapter, rotatable

• with adjustment core support • with adjustment set screws 22A2/M8x12, zinc-plated • with lamination anchor • for direct lamination into trans-femoral sockets • continuous rotation adjustment possible • including socket cap screw 22A2/M5x30

Material Weight Eff. height max.2kg Item-No. Titanium/Steel 159 g 21 mm 100 kg 10A2/TS Stainl. Steel 169 g 21 mm 125 kg 10A2/S

Please order our Lamination Dummy 22A9 separately!

www.streifeneder.com/op 77 Modular Structural Parts Modular Structural Parts

Socket Adapter -Stainless Steel-

• with M36 inner thread • for combination with rotatable adapters Titanium or Stainless Steel • for direct lamination into trans-femoral sockets • continuous rotation adjustment possible • including socket cap screw 22A2/M5x30

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 92 g 8 mm 125 kg 10A21/S

Please order our Lamination Dummy 22A9 separately!

Socket Adapter, 4-Arm -Stainless Steel-

• rotation adjustment with adjustment core • for wet laminations to AK-sockets • also suitable for direct connections to check sockets • continuous rotation adjustment possible • including socket cap screw 22A2/M5x20

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 180 g 23 mm 150 kg 10A8/S

Please order our Lamination Dummy 22A9 separately!

Socket Adapter, 4-Arm -Stainless Steel-

• rotation adjustment with adjustment core support • for wet laminations to AK-sockets • also suitable for direct connections to check sockets • continuous rotation adjustment possible • including socket cap screw 22A2/M5x20

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 170 g 28 mm 150 kg 10A9/S

Please order our Lamination Dummy 22A9 separately!

Socket Adapter, 4-Arm -Stainless Steel-

• with M36 internal thread • for combinations with titanium or stainless steel rotation adapter • for wet laminations to AK- and BK-sockets • also suitable for direct connections to check sockets • continuous rotation adjustment possible • including socket cap screw 22A2/M5x20

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 90 g 15 mm 150 kg 10A25/S

Please order our Lamination Dummy 22A9 separately!

78 www.streifeneder.com/op Modular Structural Parts Modular Structural Parts

Socket Adapter, rotatable

• with 4 adjustment set screws 22A2/M8x12, zinc-plated • with M36 outer thread • for combination with M36 inner thread and socket adapter 10A21/S and 10A25/S

Material Weight Eff. height max.2kg Item-No. Titanium 53 g 13 mm 175 kg 10A22/T Stainl. Steel 77 g 13 mm 125 kg 10A22/S

Socket Adapter, rotatable

• with adjustment core • with M36 outer thread • with center bore Ø 8,5 mm • for combination with M36 thread and socket adapter 10A21/S and 10A25/S

Material Weight Eff. height max.2kg Item-No. Titanium 38 g 5 mm 175 kg 10A23/T Stainl. Steel 63 g 5 mm 125 kg 10A23/S

Socket Adapter, rotatable -Stainless Steel-

• max. patient weight 125 kg in combination with 10A21/S • max. patient weight 150 kg in combination with 10A25/S • can be combined with M36 thread • with adjustment core • with M36 outer thread

Material Weight Eff. height Item-No. Stainl. Steel 89 g 8 mm 10A24/S

Lamination Dummy

• for adapter with adjustment core • for protection of the adjustment core during the lamination process • without bore

Material Item-No. Silicone 22A8

www.streifeneder.com/op 79 Modular Structural Parts Modular Structural Parts

Lamination Dummy

• for positioning of the lamination anchor onto the plaster positive • for socket adapter 10A1, 10A2, 10A8, 10A9, 10A21 and 10A25 with M36 inner thread

Material Item-No. POM 22A9

Socket Attachment Block

• with poplar wood • 4 countersink head bolts 22A5/M6x20 • incl. lamination dummy 12A3/E2 and sealing grease 22A100 • with plastic for optimal sanding • for better connection with laminate and for easier sanding

Block Height max.2kg Item-No. Ø 148 mm 65 mm 125 kg 12A5 Ø 120 mm 65 mm 125 kg 12A3 Ø 120 mm 30 mm 125 kg 12A7

Socket Attachment Block -Aluminum-

• for thermoplastic socket • for transfemoral and transtibial sockets • quick interims-socket • incl. countersink screws M6x30

DS = distal stump-circumference

Material DS Eff. height max.2kg Item-No. Aluminum 400 mm 25 mm 100 kg 12A1/1 Aluminum 320 mm 20 mm 100 kg 12A1/2 Aluminum 250 mm 20 mm 100 kg 12A1/3

80 www.streifeneder.com/op Modular Structural Parts Modular Structural Parts

Lamination Dummy for socket attachment block

• for 12A3, 12A5, 12A7 • for safe sealing during the lamination process • use of plasticine clay is not necessary any more

Item-No. 12A3/E2

Socket Adapter with Tube Clamp -Aluminum-, Ø 30 mm

• for adjustable connection between trans-tibial socket and distal modular parts • with lamination or deep drawing pan • setting range adjustable with center bolt • adjustable in frontal level +/- 8 mm • adjustable in sagital level +/- 6 mm • including lamination dummy -silicone- (12A8/E5L) • including deep drawing dummy -silicone- (12A8/E5T)

T. height = total height Eff. height = indicated value + socket material thickness

Socket T. height Eff. height max.2kg Item-No. Resin 68 mm 30 mm 100 kg 12A8/L Thermoplastic 56 mm 22 mm 100 kg 12A8/T

Socket Adapter with Adjustment Core -Aluminum-

T. height = total height Eff. height = indicated value + socket material thickness

Socket T. height Eff. height max.2kg Item-No. Resin 50 mm 29 mm 100 kg 12A9/L Thermoplastic 40 mm 27 mm 100 kg 12A9/T

www.streifeneder.com/op 81

Knee Joints Knee Joints Knee Joints

Prosthetic knee joint systems are used to replace the missing healthy knee joint. Their design must therefore meet very high technical demands in order to enable the amputee to live a carefree life again. Which knee joint is used for which patient is first and foremost depending on the activity level of the patient. Therefore, it is crucial to diligently and correctly determine the activity level in order to achieve the best possible provisioning for the patient.

Prosthetic knee joints must not only replace the biological knee joint but also partly take over the function of the missing muscular system as well. As a result, the prosthetic knee joint must meet numerous requirements – it has to provide the patient with a high degree of safety, meet the dynamic of the amputees and must be adjustable to his gait pattern.

Especially geriatric patients need a very good stability from heel strike to toe push-off. This can be achieved by different technical solutions such as a lock, a load-dependent brake, or by means of a polycentric knee joint as well. In order to achieve this stability, locked joints are primarily used for geriatric patients. They will allow for a bending of the lower limb (e. g. to sit down) only after the patient has manually unlo- cked them.

These needs are perfectly met by our knee joint KINEGEN.guard, which not only offers a load- dependant brake, but also a lock which can be deactivated and is backlash free.

If the patient becomes more active, it is essential to make his swing phase, which is now longer due to the increased walking speed, as comfortable as possible. Joints with adjustable load-dependent braking functions and knee-extending elastic elements such as the KINEGEN.basic provide the patient with an optimum mobility at low walking speeds. The complete development process takes place here at Streifeneder, starting from the first conceptual idea until the product is finished.

Swing-phase controlled joints for medium walking speeds such as the KINEGEN.air are equipped with a load-dependent brake, a knee-extending spring element and a pneumatic system. The pneumatic system of the KINEGEN.air allows both independent and continuous adjustments of the kinetic resistance for flexion (bending) and extension (stretching) and the continuous adjustment of the final extension impact damping. Thus, the extension impact is comfortably damped prior to the full extension of the joint.

The KINEGEN.air-active 3A1800 is a polycentric knee joint with pneumatic swing phase control and integrated extension assist. The development of the KINEGEN.air-active has been focussed especially on the balance between standing safety and joint dynamics, was well as on simple use and a sturdy mechanism. Due to the polycentric technology, an especially large flexion angle is achieved. Furthermore, the alignment of the multiple axes causes the prosthetic leg to shorten during swing phase; thus gaining safety in regards to stumbling. The pneumatic swing phase control in combination with the dynamics of the multiple joint chain helps the prosthetic wearer to maintain a harmonious and natural gait pattern.

For highly active patients, the polycentric knee joint KINEGEN.stream 3A2000 has proven its values. The prosthetic knee joint is very sturdy and is approved for up to 150 kg body weight. The axis configuration allows a maximum degree of dynamics, while a high-performance hydraulic unit with precise adjustment options allows an optimal, individual customisation of the joint to the prosthetic user. The continuously adjustable end position damping provides even more wearing comfort. Furthermore, the KINEGEN.stream features a free run mode; which enables the prosthesis user to limit the resistance in the joint to a minimum by simply switching over; during activities such as riding a bicycle.

Would you like to try out one of our KINEGEN Knee Joints for 14 days? Please give us a call. KINEGEN Knee Joints by Streifeneder

With the KINEGEN series developed by Streifeneder ortho.production and made in Germany we are able to offer an excellent choice of technically advanced prosthetic knee joints that answer to every requirement.

3A850 KINEGEN.guard Brake Knee Joint with Lock • Locking mechanism connects the upper and the lower part backlash-free, in order to offer a rigid joint with high safety level • After deactivating the lock, the joint can be used as a knee joint with constant friction • Both the braking force as well as the spring-loaded mechanism that supports the joint during extension can be individually adjusted to the patient

max. 125 kg

3A810 KINEGEN.basic Brake Knee Joint • Like 3A850, but without locking mechanism • High stance phase stability through load-dependant brake and a joint axis shifted to the back • Knee stability even when walking on an inclined plane • Very smooth-running, therefore low expenditure of energy for the patient • Interior, steplessly adjustable spring-loaded mechanism

max. 125 kg 3A1000 KINEGEN.air Brake Knee Joint with Pneumatic Swing Phase Control • Adjustable pneumatic final extension impact damping for optimum wearing comfort • Pneumatic swing-phase control through adjustable dual-chamber pneumatics • Easy adjustment of the pneumatics through flexion and extension damping which both can be independently configured • High stance phase stability through load-dependant brake and a joint axis shifted to the back • Knee stability even when walking on an inclined plane

max. 125 kg

3A1800 KINEGEN.air-active Polycentric Knee Joint with Pneumatic Swing Pha- se Control and Integrated Extension Assist Spring • Due to the polycentric technology, an especially large flexion angle is achieved, furthermore, the alignment of the multiple axes provides a shortening of the prosthetic leg during swing phase adding to an increased safety against stumbling • The pneumatic swing phase control in combination with the dynamic performance of the joint linkage • Ensures a harmonic and natural gait pattern of the prosthesis wearer • Pneumatic swing phase control by means of the adjustable pneumatic twin-chamber • Steplessly variable adjustment of the pneumatic extension- and flexion resistance • Extension support using an integrated extension assist • Mechanical stance phase safety provided by max. 125 kg polycentric technology • Simple cosmetic covering KINEGEN Knee Joints by Streifeneder Knee Joints

3A2000 3A2100 3A2200 KINEGEN.stream Polycentric Knee Joint with Hydraulic Swing Phase Control • Adjustable hydraulic final extension impact damping for optimum wearing comfort • Stepless adjustment possibilities for hydraulic extension and flexion resistance • Extension support via integrated pneumatic chamber • Very good adaption to changing different speeds • Selectable free run mode / bicycle mode • Mechanical stance phase control through poly- centricity • Shortening of the leg during swing phase through polycentric knee contruction • Proximal connection movable in A-P direction for up to 10 mm

3A2000 max. 150 kg 3A2100

3A2200 max. 125 kg Knee Joints

3A850 KINEGEN.guard Brake Knee Joint with max. 125 kg Lock

• with lock for maximum stance phase stability • lock may be deactivated for more mobile users • high stance stability through load-dependant brake and posterior positioned joint axis • interior, steplessly adjustable extension assist spring • all settings may be made wearing the prostheses and in a sitting position

Technical data • max. patient weight: 125 kg • activity level (walky): 1 to 2 • connection proximal: adjustment core • connection distal: tube clamp: Ø 30 mm • knee flexion angle: 145° • overall height: 175 mm • proximal height: 53 mm • distal height: 122 mm • effective height: 120 mm • effective proximal height: 35 mm • effective distal height: 85 mm

Accessories • cosmetic soft foam cover 63A47

Material Weight Item-No. Aluminum 850 g 3A850

After deactivating the lock, the KINEGEN.guard may also be used as a knee joint with friction brake. The friction as well as the extension assist spring may be individually adjusted to the patients´ needs.

Release Cord for 3A850 KINEGEN.guard

• complete

Item-No. 3A850/E95

www.streifeneder.com/op 89 Knee Joints Knee Joints

3A810 KINEGEN.basic Brake Knee Joint max. 125 kg • high stance stability through load-dependant brake and posterior positioned joint axis • interior, steplessly adjustable extension assist spring • all settings may be made wearing the prostheses and in a sitting position

Technical data • max. patient weight: 125 kg • activity level (walky): 1 to 2 • connection proximal: adjustment core • connection distal: tube clamp Ø 30 mm • knee flexion angle: approx. 145° • overall height: 175 mm • proximal height: 53 mm • distal height: 122 mm • effective height: 120 mm • effective proximal height: 35 mm • effective distal height: 85 mm

Accessories • cosmetic soft foam cover 63A47

Material Weight Item-No. Aluminum 830 g 3A810

Cover for 3A810 KINEGEN.basic and 3A850 KINEGEN.guard

Components • cover upper part and cover base part

Item-No. 3A850/E80

Elastomer Bumper Set for 3A810 KINEGEN.basic and 3A850 KINEGEN.guard

• suitable for knee joints KINEGEN.basic and KINEGEN.guard • 3-pc.-set • optional for softer end stop

Item-No. 3A850/E90

90 www.streifeneder.com/op Knee Joints Knee Joints

3A1000 KINEGEN.air Brake Knee Joint with max. 125 kg Pneumatic Swing Phase Control

• wide activity range • pneumatic extension impact absorbtion for optimal wearing comfort • high stance stability through load dependent brake and back shifted joint axes • knee certitude even when walking at angular levels • easy adjustment via screws and brakes • very smooth-running and therefore minimal expenditure of energy for the patient • light weight (820 g without tube) • incl. tube adapter 150A3/S400

Technical Data • max. patient weight: 125 kg • activity level (walky): 1,5 to 3 • connection proximal: adjustment core • connection distal: tube clamp Ø 34 mm • knee flexion angle: 145° • overall height: 249 mm • proximal height: 53 mm • distal height: 196 mm • effective height: 185 mm • effective proximal height: 39 mm • effective distal height: 146 mm

Accessories • cosmetic soft foam cover 61A47/36-44

Material Weight Item-No. Aluminum 820 g 3A1000

A fundamental beneﬁt of the KINEGEN.air is the precisely adjustable shock absorbing action which damps the extension impact comfortably shortly before complete extension. Therefore the patient will not experience exposure to heavy or unnecessary forces on the stump and the gait pattern will be considerably smoother. Depending on the desired adjustment it is possible to achieve a completely impactfree feeling in the stump during knee- joint extension.

Spare Parts Set for 3A1000 KINEGEN.air

Item-No. 3A1000/E75

Cover with Logo for 3A1000 KINEGEN.air

Item-No. 3A1000/E80

www.streifeneder.com/op 91 Knee Joints Knee Joints

3A1800 KINEGEN.air-active Polycentric Knee max. 125 kg Joint with Pneumatic Swing Phase Control and Integrated Extension Assist Spring

• pneumatic swing phase control by means of the adjustable pneumatic twin- chamber • steplessly variable adjustment of the pneumatic extension- and ﬂexion resistance for a natural gait pattern • extension support using an integrated extension assist spring • mechanical stance phase safety provided by polycentric technology • shortened leg during the swing phase by means of polycentric knee joint construction • large ﬂexion angle • low in maintenance • intuitive operation • simple cosmetic covering

Technical data • max. body weight: 125 kg • activity level (walky): 2 to 3 • proximal connection: pyramid adapter; distal connection: tube clamp Ø 30 mm • knee flexion angle: 150° • overall height: 228 mm • overall height joint head: 28 mm • effective height: 178 mm • effective proximal height: 14 mm • effective distal height: 164 mm

Accessories • cosmetic soft foam cover 61A147

Material Weight Item-No. Aluminum/stainless steel approx. 960 g 3A1800

The pneumatic swing phase control in combination with the dynamic performance of the joint linkage ensures a harmonic and natural gait pattern of the prosthesis wearer.

92 www.streifeneder.com/op Knee Joints Knee Joints

3A2000 KINEGEN.stream Polycentric Knee Joint max. 150 kg with Hydraulic Swing Phase Control

• controllable hydraulic extension-end-damping • automatic gait-speed-adaption • proximal slide option in the A-P dimension with a range of 10 mm • length reduction of the lower leg during swing phase through polycentric linkage • hydraulic double chamber system with inﬁnitely adjustable extension and ﬂexion resistances • integrated pneumatic extension assist • easily switchable into freewheel mode (cycling mode) • various proximal connection options (pyramide and M36 threaded connection) • energy saving initialization of swing phase • polycentric provides mechanic stance control (posterior position of the pivot) • high-capacity hydraulics due to bigger cylinder volume • running smoothness due to high-quality needle bearings

Technical data • max. patient weight: 150 kg • activity level (walky): 3 to 4 • connection proximal: adjustment core • connection distal: adjustment core • knee flexion angle: 136° • overall height: 240 mm • overall height of joint head: 38 mm • effective height: 212 mm • effective proximal height: 26 mm • effective distal height: 186 mm

Accessories • cosmetic soft foam cover 62A52 and 62A152

Material Weight Item-No. Aluminum 1120 g 3A2000

The extension movement of the KINEGEN.stream is supported by a progressive spring and thereby causes a good adaption to walking speed. With the hydraulic swing phase control and the hydraulic shock absorption action we are able to create a harmonic gait pattern.

www.streifeneder.com/op 93 Knee Joints Knee Joints

3A2100 KINEGEN.stream Polycentric Knee Joint max. 150 kg with Hydraulic Swing Phase Control

• for knee disarticulation

Technical data • max. patient weight: 150 kg • activity level (walky): 3 to 4 • connection proximal: M36 for 4 prong socket adapter • connection distal: adjustment core • knee flexion angle: 136° • overall height: 240 mm • overall height of joint head: 38 mm • effective height: 213 mm • effective proximal height: 27 mm • effective distal height: 186 mm

Accessories • cosmetic soft foam cover 62A52 and 62A152

Material Weight Item-No. Aluminum 1175 g 3A2100

Please order the 4 prong socket adapter 10A25/S separately!

94 www.streifeneder.com/op Knee Joints Knee Joints

3A2200 KINEGEN.stream Polycentric Knee Joint max. 125 kg with Hydraulic Swing Phase Control

• for knee disarticulation

Technical data • max. patient weight: 125 kg (since the 3 prong socket adapter has a maximum weight limit of 125 kg) • activity level (walky): 3 to 4 • connection proximal: M36 for 3 prong socket adapter • connection distal: adjustment core • knee flexion angle: 136° • overall height: 235 mm • overall height of joint head: 33 mm • effective height: 213 mm • effective proximal height: 27 mm • effective distal height: 186 mm

Accessories • cosmetic soft foam cover 62A52 and 62A152

Material Weight Item-No. Aluminum 1140 g 3A2200

Please order the 3 prong socket adapter 10A21/S separately!

Pyramid Connection for KINEGEN.stream

• suitable for all KINEGEN.stream knee joints • connection proximal • incl. screw, nut and adjustment core

Material Weight Eff. height Item-No. Stainl. Steel 100 g 6 mm 3A2000/E50

4-Arm-Anchor Connection M36 for KINEGEN.stream

• suitable for all KINEGEN.stream knee joints • connection proximal: M36 for 4-arm-anchor (10A25/S) • incl. screw, nut and M36 adapter

Material Weight Eff. height Item-No. Stainl. Steel 160 g 20 mm 3A2100/E50

www.streifeneder.com/op 95 Knee Joints Knee Joints

3-Arm-Anchor Connection M36 for KINEGEN.stream

• suitable for all KINEGEN.stream knee joints • connection proximal: M36 for 3-arm-anchor (10A21/S) • incl. screw, nut and M36 adapter

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 120 g 15 mm 125 kg 3A2200/E50

Rubber-Cover-Set for KINEGEN.stream

• suitable for knee joint KINEGEN.stream 3A2000, 3A2100 and 3A2200 • 1 x forepart • 2 x sidepart

Item-No. 3A2000/E70

Elastomer Damper for KINEGEN.stream

• suitable for knee joint KINEGEN.stream 3A2000, 3A2100 and 3A2200 • set including 3 pcs.

Item-No. 3A2000/E80

96 www.streifeneder.com/op Knee Joints Knee Joints

3A16 Modular Single Axis Knee Joint max. 100 kg -Stainless Steel-

• monocentric with receiver plate for socket attachment block

Recommendation • for trans-femoral amputees • with moderate functional level • medium stance phase stability • medium swing phase control • very suitable for longer stump lengths

Description The knee axis connects the upper and lower joint sections with bushings. Stance phase stability is achieved by placing the knee axis posterior to the weight bearing line. Control of the swing phase is independently provided by the 21A30 Extension Assist and by adjustment of the axis friction.

Technical data • max. patient weight: 100 kg • activity level (walky): 1 • knee flexion angle: approx. 155° • height (knee center - upper edge): 25 mm

Accessories • modular extension assist 21A30, cosmetic soft foam cover 61A47/36-44

Material Weight Eff. height Item-No. Stainl. Steel 342 g 42 mm 3A16/S

www.streifeneder.com/op 97 Knee Joints Knee Joints

3A18 Modular Single Axis Knee Joint max. 100 kg -Stainless Steel-

• monocentric

Recommendation • for trans-femoral amputees • with moderate functional level • medium stance phase stability • medium swing phase control

Technical data • max. patient weight: 100 kg • activity level (walky): 1 • knee flexion angle: approx. 155° • height (knee center – upper edge): 32 mm

Accessories • modular extension assist 21A30, cosmetic soft foam cover 61A47/36-44

Material Weight Eff. height Item-No. Stainl. Steel 358 g 42 mm 3A18/S

Modular Extension Assist for 3A16 and 3A18

Components 1 flexible plastic cover, 1 adjustment ring, 2 compression springs, 1 distal anchor shell, 1 wire bow

Item-No. 21A30

98 www.streifeneder.com/op Knee Joints Knee Joints

3A40 Modular Knee Joint -Light Metal- max. 100 kg • monocentric with manual lock

Recommendation • for trans-femoral amputees • with lower functional level • high stance phase stability • no swing phase control

Description The lower joint section with tube clamp is connected through the knee axis to the upper joint section with adjustment core. The adjustable manual lock in the lower joint section secures the joint in the extension position. Lock is released using the lock cable.

Technical data • max. patient weight: 100 kg • activity level (walky): 1 • knee flexion angle: approx. 140° • head height (knee center – upper edge): 35 mm

Accessories • cosmetic soft foam cover 60A42/36-44, 60A47/36-44 or 60A52/36-44

Material Weight Eff. height Item-No. Aluminum/Stainl. 290 g 42 mm 3A40/A Steel

Service Parts Set for 3A40

Components 1 plastic knee cap, 2 adjustment set screws, 1 lock bale with cable guide and perlon cord, 1 threaded fitting, short, 1 lock control slider, 1 plastic ring, 2 extension stops

Item-No. 3A40/E2

Perlon Cable

• for lock handle • and lock control unit 4A46

Length Item-No. 2 m 21E18

www.streifeneder.com/op 99 Knee Joints Knee Joints

3A33 Modular Single Axis Knee Joint -Titanium- max. 125 kg • monocentric • with lock and spring extension assist

Recommendation • for trans-femoral amputees • with lower functional level • high stance phase stability • no swing phase control

Description The knee axis connects the upper and lower joint section with bushings and ball bearings. The adjustable lock secures the knee in extension. Release of flexion via lock cable. Self-acting lock at full extension with the help of the extension assist.

Technical data • max. patient weight: 125 kg • activity level (walky): 1 • knee flexion angle: approx. 120° • head height (knee axis center – upper edge): 37 mm

Accessories • cosmetic soft foam cover 60A42/36-44, 60A47/36-44 or 60A52/36-44

Material Weight Eff. height Item-No. Titanium 407 g 82 mm 3A33/T

3A17 Modular Single Axis Knee Joint max. 150 kg -Stainless Steel-

• monocentric • with lock and spring extension assist

Recommendation / Function • identical in construction to 3A33

Technical data • max. patient weight: 150 kg • activity level (walky): 1 • knee flexion angle: approx. 120° • head height (knee center – upper edge): 37 mm

Accessories • cosmetic soft foam cover 60A42/36-44, 60A47/36-44 or 60A52/36-44

Material Weight Eff. height Item-No. Stainl. Steel 562 g 82 mm 3A17/S

100 www.streifeneder.com/op Knee Joints Knee Joints

Locking Unit for 3A17 and 3A33

• assembled • applicable for left and right side

Item-No. 4A40

Service Parts Set for 3A17 and 3A33

Components 1 plastic knee cap, 1 socket head bolt, 1 plantar flexion bumper, 2 ball thrust bearings, 2 compression springs, 2 spring guide pins, 2 bushings, 1 spring housing, 1 countersink screw, 2 extension assist axis, 1 allen screw M3

Item-No. 3A17/E

www.streifeneder.com/op 101 Knee Joints Knee Joints

3A34 Modular Single Axis Knee Joint -Titanium- max. 125 kg • monocentric • with mechanical extension assist

Recommendation • for AK-amputees • with medium functional level • medium stance phase stability • medium swing phase control • not suitable for unsecure users

Description The knee axis connects the upper and lower joint section with bushings and ball bearings. Stance phase stability is achieved by placing the knee axis posterior to the weight bearing line in alignment. Swing phase is controlled by axis friction and exchangeable extension assist springs.

Technical data • max. patient weight: 125 kg • activity level (walky): 1 to 2 • knee flexion angle: approx. 120° • head height (knee center – upper edge): 37 mm

Accessories • cosmetic soft foam cover 60A47

Material Weight Eff. height Item-No. Titanium 377 g 82 mm 3A34/T

3A22 Modular Single Axis Knee Joint max. 150 kg -Stainless Steel-

• monocentric • with mechanical extension assist

Recommendation / Function • identical in construction to 3A34

Technical data • max. patient weight: 150 kg • activity level (walky): 1 to 2 • knee flexion angle: approx. 120° • head height (knee center – upper edge): 37 mm

Accessories • cosmetic soft foam cover 60A47

Material Weight Eff. height Item-No. Stainl. Steel 532 g 82 mm 3A22/S

102 www.streifeneder.com/op Knee Joints Knee Joints

Service Parts Set for 3A22 and 3A34

Components 1 plastic knee cap, 1 threaded pin, 2 pressure ball bearings, 2 soft springs for ext. assist, 2 hard springs for ext. assist, 2 spring bolts, 1 bumper, 2 bushings, 2 spring sleeves, 1 pan screw, 1 allen screw M3 and 1 extension assist axis

Item-No. 3A22/E

www.streifeneder.com/op 103 Knee Joints Knee Joints

3A49 Modular Brake Knee Joint -Titanium- max. 100 kg • monocentric • including extension assist 21A40

Recommendation • for trans-femoral amputees • with medium functional level • high stance phase stability • moderate swing phase control

Description The connection between upper and lower joint section is generated by the swing-and-friction axis and operates as a load dependent brake. This secures, in combination with the posterior positioning, the stance phase. The adjustment of the axis friction and spring load controls the swing phase.

Technical data • max. patient weight: 100 kg • activity level (walky): 1 to 2 • knee flexion angle: approx. 150° • head height (knee center – upper edge): 40 mm

Accessories • cosmetic soft foam cover 61A47/36-44

Material Weight Eff. height Item-No. Titanium 356 g 47 mm 3A49/T

3A15 Modular Brake Knee Joint max. 100 kg -Stainless Steel-

• monocentric • including extension assist 21A40

Recommendation / Function • identical in construction to 3A49

Technical data • max. patient weight: 100 kg • activity level (walky): 1 to 2

Material Weight Eff. height Item-No. Stainl. Steel 534 g 47 mm 3A15/S

104 www.streifeneder.com/op Knee Joints Knee Joints

Extension Assist for 3A15 and 3A49

Components 1 flexible plastic cover, 1 adjustment ring, 2 compression springs, 1 distal anchor shell, 1 extension assist cable 304 mm

Item-No. 21A40

Service Parts Set for 3A15 and 3A49

Components 1 brake bushing, 1 extension stop, 1 bumper, 2 bearing washers (big), 2 bearing washers (small), 2 locking rings, 2 extension stops, 1 brake bushing circlip, 1 knee axis bolt and 1 knee axis

Item-No. 3A15/E1

www.streifeneder.com/op 105 Knee Joints Knee Joints

3A36 Modular 4-Bar Linkage Knee Joint max. 100 kg -Titanium-

• polycentric • with integrated extension assist

Recommendation • for trans-femoral amputees • with medium functional level • medium stance phase stability • medium swing phase control • suitable also for hip disarticulation amputees

Description Upper and lower joint section are connected with linkage bars. The stance phase stability is achieved with the polycentric kinematic (adjustment of the instant center of rotation by adjustment of the stop). The stepless adjustment of the axis friction and of the extension assist spring controls the swing phase.

Technical data • max. patient weight: 100 kg • activity level (walky): 1 to 2 • knee flexion angle: approx. 120° • head height (knee center – upper edge): 37 mm

Accessories • cosmetic soft foam cover 61A47/36-44

Material Weight Eff. height Item-No. Titanium 447 g 82 mm 3A36/T

106 www.streifeneder.com/op Knee Joints Knee Joints

3A20 Modular 4-Bar Linkage Knee Joint max. 100 kg -Stainless Steel-

• polycentric • with integrated extension assist

Recommendation / Function • identical in construction to 3A36

Technical data • max. patient weight: 100 kg • activity level (walky): 1 to 2 • knee flexion angle: approx. 120° • head height (knee center – upper edge): 37 mm

Accessories • cosmetic soft foam cover 61A47/36-44

Material Weight Eff. height Item-No. Stainl. Steel 680 g 82 mm 3A20/S

Service Parts Set for 3A20 and 3A36

Components 1 plastic knee cap, 1 socket cap screw, 1 extension stop - complete, 1 extension bumper, 1 pin for extension assist, 1 spring for extension assist, 1 adjustment screw for extension assist, 1 ball - stainless steel, 2 lock nuts, 2 posterior axis pins, 4 bearing washers - brass, 4 washers

Item-No. 3A20/E

www.streifeneder.com/op 107 Knee Joints Knee Joints

3A32 Modular 4-Bar Linkage Knee Joint max. 125 kg -Titanium-

• for knee disarticulation • polycentric

Recommendation • for knee disarticulation amputees • with lower functional level • high stance phase stability • no swing phase control • not suitable for amputees with moderate activity levels

Description The upper joint section with adjustment core and the lower joint section with pyramide are connected to each other with anterior and posterior linkage bars. The lamination anchor is the detachable connection to the socket. The adjustable lock secures the knee in extension. Lock is released using the lock cable.

Technical data • with lock • max. patient weight: 125 kg • activity level (walky): 1 • knee flexion angle: approx. 110° • head height (knee center – upper edge): 18 mm

Accessories • cosmetic soft foam cover 60A47

Material Weight Eff. height Item-No. Titanium 658 g 120 mm 3A32/T

108 www.streifeneder.com/op Knee Joints Knee Joints

3A23 Modular 4-Bar Linkage Knee Joint max. 125 kg -Stainless Steel-

• for knee disarticulation • polycentric

Recommendation / Function • identical in construction to 3A32

Technical data • with lock • max. patient weight: 125 kg • activity level (walky): 1 • knee flexion angle: approx. 110° • head height (knee center – upper edge): 18 mm

Accessories • cosmetic soft foam cover 60A47

Material Weight Eff. height Item-No. Stainless Steel 878 g 120 mm 3A23/S

Service Parts Set for 3A23 and 3A32

Components 4 axis bushings, 4 slotted bushings, 2 bumpers, 4 plate washers, 2 circlips, 2 counter nuts, 1 treaded bolt, 4 round-head screws and 4 two-hole nuts

Item-No. 3A23/E

Lock Control Unit

• accessory • big lever for simple installation, useable for left and right • adjustable for push and pull, replaces the factory-made lock handle

Material Item-No. Plastic 4A34

www.streifeneder.com/op 109 Knee Joints Knee Joints

Lock Control Unit with Lock Mechanism

• service part for 3A23 and 3A32 • can be exchanged as a complete unit

Item-No. 4A46

110 www.streifeneder.com/op Knee Joints Knee Joints

3A30 Modular 4-Bar Linkage Knee Joint max. 125 kg -Titanium-

• for knee exarticulation • polycentric • with mechanical extension assist

Recommendation • for knee disarticulation amputees • with medium functional level • normal stability

Description The upper joint section with adjustment core and the lower joint section with pyramid are connected to each other with anterior and posterior linkage bars. The lamination anchor is the detachable connection to the socket. The stance phase stability is achieved through polycentric kinematics. Extension assist and axial friction are both adjustable.

Technical data • max. patient weight: 125 kg • activity level (walky): 1 to 2 • knee flexion angle: approx. 110° • head height (knee center – upper edge): 18 mm

Accessories • cosmetic soft foam cover 60A47

Material Weight Eff. height Item-No. Titanium 657 g 120 mm 3A30/T

www.streifeneder.com/op 111 Knee Joints Knee Joints

3A21 Modular 4-Bar Linkage Knee Joint max. 125 kg -Stainless Steel-

• for knee exarticulation • polycentric • with mechanical extension assist

Recommendation / Function • identical in construction to 3A30

Technical data • max. patient weight: 125 kg • activity level (walky): 1 to 2 • knee flexion angle: approx. 110° • head height (knee center – upper edge): 18 mm

Accessories • cosmetic soft foam cover 60A47

Material Weight Eff. height Item-No. Stainl. Steel 870 g 120 mm 3A21/S

Lamination Anchor

• Replacement Part for 3A21, 3A23, 3A30 and 3A32

Material Weight max.2kg Item-No. Stainl. Steel 130 g 125 kg 3A21/E1

112 www.streifeneder.com/op Knee Joints Knee Joints

3A54 Modular 4-Bar Linkage Knee Joint max. 125 kg -Titanium-

• with adjustment core on both sides • polycentric • with mechanical extension assist

Recommendation • for knee disarticulation amputees • with medium functional level • normal stability

Description The upper and lower joint section is connected to each other with anterior and posterior linkage bars. The lamination anchor is the detachable connection to the socket. The stance phase stability is achieved through polycentric kinematics. Extension assist and axial friction are both adjustable.

Technical data • max. patient weight: 125 kg • activity level (walky): 1 to 2 • knee flexion angle: approx. 110° • head height (knee center – upper edge): 28 mm

Accessories • cosmetic soft foam cover 60A47

Material Weight Eff. height Item-No. Titanium 567 g 116 mm 3A54/T

www.streifeneder.com/op 113 Knee Joints

3A25 Modular 4-Bar Linkage Knee Joint max. 125 kg -Stainless Steel-

• with adjustment core on both sides • polycentric • with mechanical extension assist

Recommendation / Function • identical in construction to 3A54

Technical data • max. patient weight: 125 kg • activity level (walky): 1 to 2 • knee flexion angle: approx. 110° • head height (knee center – upper edge): 28 mm

Accessories • cosmetic soft foam cover 60A47

Material Weight Eff. height Item-No. Stainl. Steel 768 g 116 mm 3A25/S

Service Parts Set for 3A21, 3A25, 3A30 and 3A54

Components 4 slotted bushings, 4 spring washers, 1 adjustment set screw, 2 locking rings, 2 lock nuts, 2 bumpers, 1 extension assist spring, 1 bearing for extension assist, 1 guide for extension assist, 1 plastic guide, 1 nut for extension assist, 4 round-head screws and 4 two-hole nuts

Item-No. 3A21/E

114 www.streifeneder.com/op Hip Joints Hip Joints Hip Joints Hip Joints

Hip prostheses are used for the following indications • Introtrochanderic amputation • Hip disarticulation • Hemipelvectomy

During alignment of the prosthetic components, it is crucial to pay special attention to the correct position of the joint. Please always make sure that the joint flexes properly in walking direction. Since a hip joint is always attached to the pelvic cavity in front of the load line, the subsequent run of the tube towards the knee joint must have a posterior direction. This guarantees a backwards inclination of the knee joint axis according to the construction guidelines and a safe standing position of the patient. A tube clamp adapter (11A12/A or 11A20/T) having an inclination of 10° to 20° is inevitably required in most cases to connect the knee joint with the femoral tube.

To ensure stance control, it is always recommendable to use a polycentric knee joint e. g. 3A36 / 3A20 together with a hip prostheses. Hip Joints

7A4 Modular Hip Joint -Aluminum- max. 100 kg • max. patient weight: 100 kg • activity level (walky): 1 to 2 • monocentric • with extension assist

Recommendation • for hip disarticulation and hemipelvectomy amputees • with medium functional level • medium stance phase stability • medium swing phase control

Description The hip joint must be bolted through the double hinch to the socket lamination plate inside the hip containment. The extension assist with adjustable stop ring and laterally attached rubber elastics secures the joint in extension position. The extension assist limits the range of movement during ambulation.

Material Weight Eff. height Item-No. Aluminum 862 g 150 mm 7A4/A

Service Parts Set for 7A4

Components 1 distal slide control anchor, 1 wire bow with plastic roller, 1 proximal slide control anchor, 1 extension bumper, 2 rubber elastics, 4 countersink head bolts, 1 complete posterior strut

Item-No. 7A4/E

Spare Hip Extension Assist for 7A4

Item-No. 7A4/E1

Lamination Plate for 7A4

• lamination plate for modular hip joint 7A4 with screw connection

Item-No. 7A4/E2

www.streifeneder.com/op 117 Hip Joints

7A5 Modular Hip Joint -Titanium- max. 100 kg • max. patient weight: 100 kg = activity level (walky): 1 to 2 max. • max. patient weight: 75 kg = activity level (walky): 3 75 kg • moreover, it is also suitable for more active patients, up to 75 kg body weight • is to be used exclusively for the prosthetic ﬁtting • in a sitting position, the low construction height (thickness of laminate) of the joint, reduces the pelvic tilt to a minimum • continuous adjustment of ﬂexion extension as well as abduction-adduction is possible • an additional laminating aid facilitates production and mounting of the prosthesis • the hip joint in relation to the knee axis can be adjusted by rotation of the thigh tube • the tension of the integrated hip extension bias spring is also continuously adjustable • remove the thigh tube to access the spring

Material Weight Eff. height Item-No. Titanium 805 g 60 mm 7A5

Service Parts Set for 7A5

Components 1 tappet, 1 guide sleeve, 1 extension assist spring,1 hexagon socket head screw M3, 1 extension stop bumper 2 cap screw M8x25, 1 cap screw M5x30, 1 lock ring, 1 protective sleeve

Item-No. 7A5/E

Lamination Plate for 7A5

• lamination plate for modular hip joint 7A5 with screw connection

Item-No. 7A5/E2

118 www.streifeneder.com/op Socket Comfort Socket Comfort Socket Socket Comfort – at one glance

ClearSil. ClearSil.basic ClearSil.stabil ClearSil.cushion compression

Walky System

Pear-shaped BK stump (trans-tibial stump) post-operative

Normal cylindrical‚ BK stump (trans-tibial stump) post-operative

Bony conical BK stump for pressure-sensitive (trans-tibial stump) residual limb ends

Cylindrical AK-stump (trans-femoral stump) post-operative

Conical AK-stump (trans-femoral stump) post-operative

= optimal = good suitable Please see the introductory pages of this catalogue for more information about our Walky-system. DuoSil.basic ComfortSil.basic ClassicSil.basic AK-Control.Sil ContexGel.basic ComfortSil.soft ClassicSil.soft ContexGel.soft ContecGel.soft+

3 mm basic 3 mm basic

for large 3 mm basic 3 mm basic BK-stumps

6 mm soft 6 mm soft

use 3 mm version only

use 3 mm version only Socket Comfort

In orthopaedic technology, prosthetic care with silicone and polymer-gel-liners has been modern standard since approx. 20 years.

Accordingly, the term “polymer” means that the cushioning material has been made of “many identical particles”. Silicone is a polymer material as well, excellently suitable for cushioning purposes in orthopaedic technology. The softer and thicker the polymer layer is; the less suitable it is for higher activities resp. the shorter the lifespan of the polymer. Polymer-liners target the user group with level 1 or 3 in our walky-system or with very sensitive, bony residual limbs.

The thinner and more solid the polymer layer is, the more control of the prosthetic socket is provided and therefore it is suitable for patients with higher activity. The more solid material is usually silicone and therefore it is more durable than softer polymer. The user group for these liners usually are classified 2 to 4 in our walky-system. Benefits of Liners by Streifeneder ortho.production GmbH for the user • Maximum wearing comfort of the prosthetic socket • Punctual and surface cushioning for bony, scarred and difficult residual limbs • Shape stability for excess soft tissue • Targeted stump compression for reduction and prevention of oedema; post operative and preventative • Reduction of stump volume changes (stump fluctuations) • Reduced elongation due to integrated, textile reinforcement • Skin caring ingredients such as medical white oil provide protection and care • Safe adaption between user’s stump and prosthesis by means of proven pin- or cord lock or vacuum socket technology (VST) • Simple handling, easy cleaning and guaranteed longevity • Easy rolling up and down of the liner due to smooth fabric cover • Less restraining prosthetic care possible (renouncement of high condylar guard or upper thigh cuff with lateral splint guard)

Features • Additives with aseptic surface effects • Improved polymer features • Distal rotation control for more stability • Anti-rotation strips for above-knee liners AK-Control.Sil 60L1 • New functional cover fabric Socket Comfort – FAQs

Skin irritations in the area of the liner edge (little blisters on the skin)? Skin irritations sometimes appear at the liner edge upon first use of polymer-liners. Usually, cutting the liner edge into shape with a pair of scissors helps. When cutting, the cutting edge can be broken with a small pair of half-round scissors. Another reason is putting on the liner under tension. Especially for problems in the rear, upper thigh area, a thinner liner is recommendable. Additionally, in order to minimize friction, the skin in the edge area can be coated with skin cream (e.g. Skin Protection Cream 10H3).

Skin irritations on the entire residual limb skin? Generally, the inside of all silicone and polymer-gel-liners must be washed prior to first use with lots of warm water and pH-neutral soap (e.g. with Skin-Care-Washing Lotion 10H2) and then dried with a paper towel. A new prosthesis always creates a new skin situation in the liner and every user may react in a different way. At the beginning, excessive sweating in the liner may lead to allergic reactions and therefore, hygiene is very important. The solution for this is also very careful washing of the liner with neutral sop (10H2) and lots of water. Another reason for allergic reactions in connection with damage of the liner material may be caused by medica- tion, which releases substances through the skin pores due to natural metabolic processes and lead to a chemical reaction with sweat. If this is the cause, a medical doctor or dermatologist must be consulted.

Excessive sweating in the liner does not stop. What could be the cause? If excessive and permanent sweating in the liner continues, size and fit of the liner in the prosthetic socket must be checked. Air locked in between residual limb skin and liner may lead to excessive sweating.

The BK-prosthesis wearer complains about red skin above and on the knee cap? Usually, it already helps to unroll the liner over a slightly bent knee, in order to reduce the skin tension in this area.

The pin is never positioned straight in the socket? Possible causes are either the stump position in the phase of putting the liner on with the result of an unfortu- nate flexion angle during entering the prosthetic socket. Or, a very distinctive socket shape, which squeezes the residual limb together with the liner into a certain direction when entering. Both will lead to unilateral friction spots in the hopper area of the locking system. Putting the liner cup transversally onto the stump end may solve the problem. Generally, already during plaster casting, the centered pin position at the liner must be considered, in order to avoid the above mentioned problems later. How do I care for the liner? All liners must be carefully cleaned with Skin-Care-Washing Lotion 10H2 prior to first use, in order to remove possible residues from manufacturing and to avoid skin irritations. Daily cleaning of the liner with Skin-Care-Washing Lotion 10H2 prevents skin irritations and extends the life time of the liner. For heavy-duty use, the liner may be put on each day in a position turned by a few centime- ters, this will provide even wear. Socket Comfort – Silicone Liners

Features of Silicone Liners by Streifeneder ortho.production GmbH Liners with quality seal To improve the hygienic conditions for liner wearers, we use special additives which produce an aseptic surface effect. One of our additives is “Sterione” and is supplied by a company with the same name, SteriOne GmbH. This patented technology grants that the treated liner material permanently inhibits infestation of bacteria and micro-organisms. The liners sold by Streifeneder ortho.production GmbH have been awarded a quality seal and are approved as “antibacterial”. The symbol shown below indicates the use of Sterione for antibacterial effect. This effect has also been approved by one more, independent testing institute

The quality seal grants • Effectiveness period of at least five years • Elimination of 5 million germs per hour and square-centimeter

The application of Sterione effectively prevents • bacteria growth (e.g. pneumococco-bacilli and multi-resistant micro-organisms such as MRSA) • Test strains Staphylococcus areus and Escherichia coli

Rotation control of Comfort.Sil Liner, Classic.Sil Liner and AK-Control.Sil Liner • More rotation stability between liner and prosthetic socket • Better guidance and control of the BK-prosthesis

AK-Control.Sil Liner 60L1 with anti rotation strips • More rotation stability between liner and prosthetic socket • Better guidance and control of the BK-prosthesis

Silver-grey fabric coating with improved features (rolling characteristics, longevity) of the silicone liners • Recognition value for all Silicone Liners with fabric cover Benefits of Silicone Liners by Streifeneder ortho.production GmbH • Excellent cleaning properties by closed-pore surface • Outstanding skin comfort, as silicone is physiologically safe • Oils contained in the silicone moisturise the residual limb skin • Thin liner wall provides at the same time good shape stability • Good circular elasticity for stump fluctuations • Low longitudinal tension of silicone liners with fabric cover • Positive compression benefits the stump • Excellently suited for early care (interim care) • Resistant against body fluids, chlorine and UV-light; sterilisable at approx. 120 °C (248 °F) • Special sizes with matrix length of up to 18 cm available upon request

How to choose the correct liner 1. Step Size determination for a silicone liner – Measure the distal circumference approx. 4 cm above the tip of the stump. The first two numbers indicate the basic size, e. g. measured circumference 28 cm = size 28 Please order the silicone liner without fabric cover as follows • For the initial supply two to three sizes smaller • For the follow-up supply one to two sizes smaller Please order the silicone liner with fabric cover as follows • For the initial supply one to two sizes smaller • For the follow-up supply zero to one size smaller Please take these calculated values only as a guideline, since each patient has his or her individual requirements.

2. Step Finding the correct matrix length for a silicone liner – The precise length of the stump as well as the structure of the bones is decisive for selecting the correct interior laminate. We recommend • A minimum of 6 cm into the bony structure • Ending below the fibula head (distally) at the most Customized model: We can manufacture special design liners with a matrix of 5 cm for very short stumps and liners up to 18 cm for long stumps.

3. Step Trimming the silicone liner • Easily cut the rim of the liner as desired using a pair of scissors. • The reversal-safe intermeshing of the jersey fabric allows for a problem-free and individual trimming of the liner. Socket Comfort – Silicone Liners Socket Comfort – Silicone Liners

ClearSil.compression Post surgical compression liner without internal matrix and without distal connection

Designated use • targeted stump compression after leg amputation • early accomodation to silicone liner use • early forming of the stump

Characteristics • silicone liner without internal matrix and without distal connection • controlled compression • bandaging not necessary, therefore no restriction due to wrong bandaging • enhances blood circulation and reduces edema accumulation • heat resistent, therefore suitable for steam sterilisation at 120 °C

Material • wall thickness: see sketch • Clear-Sil-Silicone, firm, antibacterially fitted • approx. 53 Shore 00 • without textile cover • colour: translucent

Warranty • 12 months

Size Item-No. 23,5, 25, 26,5, 28, 30, 32, 34, 36, 38, 40, 42, 45 1S22/..

Ordering example 1S22/23,5 = size 23,5

For application of silicone liners without textile lining, skin care spray 10H5 must be used. Please use the supplied compression chart for documentation of the residual limb volume.

Total length: approx. 370 mm

ClearSil.compression Sets without picture Post surgical compression liner sets in various sizes • application, characteristics and material like item 1S22

Set Content Item-No. 1 sizes 23,5, 25, 26,5 1S22/1 2 sizes 28, 30, 32, 34 1S22/2 3 sizes 36, 38, 40 1S22/3

www.streifeneder.com/op 129 Socket Comfort – Silicone Liners Socket Comfort – Silicone Liners

ClearSil.basic Silicone liner without internal matrix, with and without distal connection

Designated use • activity level (walky): 2 to 4 • well-suited for short residual limbs • interim prostheses and early applications

Characteristics • silicone liner without internal matrix • with and without distal connection • distally very elastic • due to the high stability, very suitable for medium active wearers of prostheses • compresses the stump heat resistent, therefore suitable for steam sterilisation at 120 °C

Material • wall thickness: see sketch • Clear-Sil-Silicone, firm, antibacterially fitted • approx. 53 Shore 00 • without textile cover • colour: translucent

Warranty • 12 months

Size Distal Item-No. connection 12, 14, 16, 18, 20, 21, 22, 23,5, 25, 26,5, 28, with 1S3/.. 30, 32, 34, 36, 38, 40, 42, 45 12, 14, 16, 18, 20, 21, 22, 23,5, 25, 26,5, 28, without 1S4/.. 30, 32, 34, 36, 38, 40, 42, 45

Ordering example: 1S3/12 = with distal connection, size 12

Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner in the same size or one size smaller. For application of silicone liners without textile lining skin care spray 10H5 must be used.

Total length: 370 mm

130 www.streifeneder.com/op Socket Comfort – Silicone Liners Socket Comfort – Silicone Liners

ClearSil.stabil 5, ClearSil.stabil 10, ClearSil.stabil 15 Silicone liner with 5 cm, 10 cm, 15 cm internal matrix, with distal connection

Designated use • activity level (walky): 2 to 4 • suitable for all prostheses wearers for basic care

Characteristics • silicone liner with internal matrix and with distal connection • elongation reduction in the lower socket area due to matrix of 5, 10 or 15 cm length • high stability and high wearing comfort • good fitting • only minor influence on radial expansion

Material • wall thickness: see sketch • Clear-Sil-Silicone, firm, antibacterially fitted • approx. 53 Shore 00 • without textile cover • colour: translucent

Warranty • 12 months

Custom-made liners All sizes of liners with different internal laminate of 5 - 18 cm length can be manufactured within 3 - 5 working days at no extra costs. All customized liners are reduced to a 3 months warranty.

Size Internal Item-No. matrix 14, 16, 18, 20, 21, 22, 23,5, 25, 26,5, 28, 5 cm 51S1/.. 30, 32, 34, 36, 38, 40, 42, 45 12, 14, 16, 18, 20, 21, 22, 23,5, 25, 26,5, 10 cm 1S1/.. 28, 30, 32, 34, 36, 38, 40, 42, 45 18, 20, 21, 22, 23,5, 25, 26,5, 28, 30, 32, 15 cm 151S1/.. 34, 36, 38, 40, 42, 45

Ordering example: 1S1/12 = with 10 cm internal matrix, size 12

Total length: approx. 370 mm

www.streifeneder.com/op 131 Socket Comfort – Silicone Liners Socket Comfort – Silicone Liners

ClearSil.cushion Silicone liner with internal matrix and soft cushioning spot, with distal connection

Designated use • activity level (walky): 2 to 4 • suitable for stumps with extensive scars and pressure sensitive stump ends

Characteristics • silicone liner with distal connections • 10 cm internal matrix reduces axial expansion (elongation reduction) • especially thick and soft cushioning (residual limb end cushion) in liner cup, see sketch • the expansion in radial direction is only slightly affected • gives users with difficult stump end conditions a pleasant wearing comfort.

Material • wall thickness: see draft • Clear-Sil-Silicone, firm, antibacterially fitted • approx. 53 Shore 00, at stump end load cushion approx. 25 Shore 00 • without textile cover • colour: translucent

Warranty • 12 months

Custom-made liners All sizes of liners with different internal matrix of 5 - 18 cm length can be manufactured within 3 - 5 working days at no extra costs. All customized liners are reduced to a 3 months warranty.

Size Internal Item-No. matrix 14, 16, 18, 20, 21, 22, 23,5, 25, 26,5, 28, 10 cm 1S2/.. 30, 32, 34, 36, 38, 40, 42, 45

Ordering example: 1S2/14 = size 14

Total length: approx. 370 mm

132 www.streifeneder.com/op Socket Comfort – Silicone Liners Socket Comfort – Silicone Liners

DuoSil.basic Two layer silicone liner with 10 cm internal matrix, with distal connection, made of DuoSil-Silicone

Designated use • activity level (walky): 1 to 3 • suitable as a basic fitting for medium active patients • suitable for difficult stump conditions

Characteristics • two layer silicone liner • with very soft internal silicone layer for high wearing comfort and optimal damping • harder silicone layer on the outside gives the liner stability and tear resistance • 10 cm inner matrix reduces axial expansion • with distal connection

Material • wall thickness: see sketch • DuoSil-Silicone, antibacterially fitted • internal layer: approx. 40 Shore 00 • external layer: approx. 50 Shore 00 • without textile cover • colour: peach

Warranty • 12 months

Custom-made liners • All sizes of liners with different internal matrix of 5 - 18 cm length can be manufactured within 3 - 5 working days at no extra costs.

Size Internal matrix Item-No. 16, 18, 20, 21, 22, 23,5, 25, 26,5, 28, 10 cm 1S18/.. 30, 32, 34, 36, 38, 40, 42, 45

Ordering example: 1S18/16 = size 16

Total length: approx. 370 mm

www.streifeneder.com/op 133 Socket Comfort – Silicone Liners Socket Comfort – Silicone Liners

ComfortSil.basic Silicone Liner made of soft 3 mm Comfort-Sil-Silicone

Designated use • activity level (walky): 1 to 3 • suitable as a basic fitting for geriatric patients • for pressure sensitive patients

Characteristics • optimal wearing comfort and damping • especially soft functional textile cover for easily rolling the liner up or down • functional textile cover minimises longitudinal expansion • excellent circular expansion adjusts to volume changes of the residual limb • item 40L110: integrated 10 cm long matrix reduces the distal elongation at the residual limb • distal rotation control supports guidance of prosthesis • available with distal connection for all Streifeneder pin-types and locking systems • available without distal connection and rotation control for vacuum-socket- technology (VST)

Material • wall thickness: 3 mm, see sketch • Comfort-Sil-Silicone, soft, antibacterially fitted • approx. 26 Shore 00 • abrasion-proof textile cover made of polyamide / elastane • item 40L110 with PUR-rotation control • colour: silver grey

Warranty • 6 months

Size Wall Internal Distal Item-No. thickness matrix connection 16, 18, 20, 21, 22, 3 mm 10 cm with 40L110/.. 23,5, 25, 26,5, 28, 30, 32, 34, 36, 38, 40, 42, 45 16, 18, 20, 21, 22, 3 mm without without 40L200/.. 23,5, 25, 26,5, 28, 30, 32, 34, 36, 38, 40, 42, 45

Ordering example: 40L110/16 = with distal connection, size 16. Scope of supply includes stand.

Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner in the same size or one size smaller.

Total length: approx. 370 mm

134 www.streifeneder.com/op Socket Comfort – Silicone Liners Socket Comfort – Silicone Liners

ComfortSil.soft Silicone liner made of soft 6 mm Comfort-Sil-Silicone

Designated use • activity level (walky): 1 to 3 • suitable as a basic fitting for geriatric patients • for pressure sensitive patients • for bony residual limbs with low soft tissue coverage

Characteristics • optimal wearing comfort and damping • especially soft functional textile cover for easily rolling the liner up or down • functional textile cover minimises longitudinal expansion • excellent circular expansion adjusts to volume changes of the residual limb • item 41L110: integrated 10 cm long matrix reduces the distal elongation at the residual limb • distal rotation control supports guidance of prosthesis • available with or without distal connection • suitable for all Streifeneder pin types and locking systems

Material • wall thickness: 6 mm, see sketch • Comfort-Sil-Silicone, soft, antibacterially fitted • approx. 26 Shore 00 • abrasion-proof textile cover made of polyamide / elastane • item 41L110 with PUR-rotation control • colour: silver grey

Warranty • 6 months

Size Wall Internal Distal Item-No. thickness matrix connection 16, 18, 20, 21, 22, 6 mm 10 cm with 41L110/.. 23,5, 25, 26,5, 28, 30, 32, 34, 36, 38, 40, 42, 45 16, 18, 20, 21, 22, 6 mm without without 41L200/.. 23,5, 25, 26,5, 28, 30, 32, 34, 36, 38, 40, 42, 45

Ordering example: 41L110/16 = with distal connection, size 16. Scope of supplyincludes stand.

Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner in the same size or one size smaller.

Total length: approx. 370 mm

www.streifeneder.com/op 135 Socket Comfort – Silicone Liners Socket Comfort – Silicone Liners

ClassicSil.basic Silicone Liner made of 3 mm stable two layer Duo-Sil-Silicone

Designated use • activity level (walky): 2 to 4 • excellently suitable for standard care • for normal pressure-sensitive users with sufficient soft tissue coverage • „allrounder“

Characteristics • for optimal wearing comfort and damping • especially soft functional textile cover for easily rolling the liner up or down • functional textile cover minimises longitudinal expansion • excellent circular expansion adjusts to volume changes of the residual limb • item 50L110: integrated 10 cm long matrix reduces the distal elongation at the residual limb • distal rotation control supports guidance of prosthesis • available with and without distal connection • suitable for all Streifeneder pin types and locking systems

Material • wall thickness: 3 mm, see sketch • two layer Duo-Sil-Silicone, stable, antibacterially fitted • internal layer (upon skin): 26 Shore 00 • middle layer: 53 Shore 00 • abrasion-proof textile cover made of polyamide / elastane • item 50L110 with PUR-rotation control • colour: silver grey

Warranty • 12 months

Size Wall Internal Distal Item-No. thickness matrix connection 16, 18, 20, 21, 22, 3 mm 10 cm with 50L110/.. 23,5, 25, 26,5, 28, 30, 32, 34, 36, 38, 40, 42, 45 16, 18, 20, 21, 22, 3 mm without without 50L200/.. 23,5, 25, 26,5, 28, 30, 32, 34, 36, 38, 40, 42, 45

Ordering example: 50L110/16 = with distal connection, size 16. Scope of supply includes stand.

Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner in the same size or one size smaller.

Total length: approx. 370 mm

136 www.streifeneder.com/op Socket Comfort – Silicone Liners Socket Comfort – Silicone Liners

ClassicSil.soft Silicone liner made of 6 mm two layer stable Duo-Sil-Silicone

Designated use • activity level (walky): 2 to 4 • excellently suitable for standardard care • for pressure-sensitive users with low soft tissue coverage

Characteristics • optimal wearing comfort and damping • especially soft functional textile cover for easily rolling the liner up or down • functional textile cover minimises longitudinal expansion • excellent circular expansion adjusts to volume changes of the residual limb • item 51L110: integrated 10 cm long matrix reduces the distal elongation at the residual limb • distal rotation control supports guidance of prosthesis • available with and without distal connection • suitable for all Streifeneder pin types and locking systems

Material • wall thickness: 6 mm, see sketch • two layer Duo-Sil-Silicone, stable, antibacterially fitted • internal layer (on the skin): 26 Shore 00 • middle layer: 53 Shore 00 • abrasion-proof textile cover made of polyamide / elastane • item 51L110 with PUR-rotation control • colour: silver grey

Warranty • 12 months

Size Wall Internal Distal Item-No. thickness matrix connection 16, 18, 20, 21, 22, 6 mm 10 cm with 51L110/.. 23,5, 25, 26,5, 28, 30, 32, 34, 36, 38, 40, 42, 45 16, 18, 20, 21, 22, 6 mm without without 51L200/.. 23,5, 25, 26,5, 28, 30, 32, 34, 36, 38, 40, 42, 45

Ordering example: 51L110/16 = with distal connection, size 16. Scope of supplyincludes stand.

Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner in the same size or one size smaller.

Total length: approx. 370 mm

www.streifeneder.com/op 137 Socket Comfort – Silicone Liners Socket Comfort – Silicone Liners

AK-Control.Sil Trans-femoral silicone liner made of medium stable Control-Sil-Silicone, with distal connection and anti-rotation strips

Designated use • activity level (walky): 1 to 4 • ideal for liner-care of above-knee amputations and for care of voluminous below-knee amputations

Characteristics • 2 mm wall thickness for controlled expansion in the socket entry zone • outer matrix (sewed-on strip) for reduction of longitudinal expansion (inhibited longitudinal expansion) • anti-rotation strips on the outer matrix prevent twisting between liner and prosthetic socket • especially soft functional textile lining for easily rolling the liner up or down • very good radial expansion adjusts to volume changes of the residual limb • rotation control to improve guidance of prosthesis • with distal connection for all Streifeneder pin types and locking systems

Material • wall thickness: 2 mm, see sketch • Control-Sil-Silicone, medium stable, antibacterially fitted • approx. 40 Shore 00 • abrasion-proof textile lining made of polyamide / elastane • three rows of silicone stripes on the textile strip in vertical direction • with PUR-rotation control • colour: silver grey / black

Warranty • 6 months

Size Wall Item-No. thickness 25, 26,5, 28, 30, 32, 34, 36, 38, 40, 42, 45, 2 mm 60L1/.. 50, 55

Width of textile strip: 38 mm Ordering example: 60L1/25 = size 25. Scope of supply does include stand.

Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner in the same size or one size smaller.

Total length: approx. 370 mm

138 www.streifeneder.com/op Socket Comfort – Silicone Liners Socket Comfort – Silicone Liners

AK-Control.Sil Trans-femoral silicone liner made of medium stable Control-Sil-Silicone, with distal connection, without anti-rotation strips

Designated use • activity level (walky): 1 to 4 • ideal for liner-care of above-knee amputations and for care of voluminous below-knee amputations

Characteristics • 2 mm wall thickness for controlled expansion in the socket entry zone • outer matrix (sewed-on strip) for reduction of longitudinal expansion (inhibited longitudinal expansion) • especially soft functional textile lining for easily rolling the liner up or down • very good radial expansion adjusts to volume changes of the residual limb • rotation control to improve guidance of prosthesis • with distal connection for all Streifeneder pin types and locking systems

Material • wall thickness: 2 mm, see sketch • Control-Sil-Silicone, medium stable, antibacterially fitted • approx. 40 Shore 00 • abrasion-proof textile lining made of polyamide / elastane • crosswise elastic textile strip to limit longitudinal stroke • with PUR-rotation control • colour: silver grey / black

Warranty • 6 months

Size Wall Item-No. thickness 25, 26,5, 28, 30, 32, 34, 36, 38, 40, 42, 45, 2 mm 60L5/.. 50, 55

Ordering example: 60L5/25 = size 25. Scope of supply does include stand. Wiidth of textile strip: 20 mm Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner in the same size or one size smaller.

Total length: approx. 370 mm

www.streifeneder.com/op 139

Socket Comfort – Gel Liners

Benefits of Gel-Liners • „Flow characteristics“ (viscoelasticity) of the polymer gel provide even pressure distribution in the socket; e.g. significantly reduce pressure- and shear forces • Medical white oils in the polymer gel provide care for the stressed stump skin and maintain the natural skin moisture • Contex-Gel Liners are mouldable at 60 °C – for optimal adaption to unusual stump shapes • Various ventral wall thicknesses (3, 6, 9 mm) with constant thin dorsal wall thickness (3 mm); e.g. additional cushioning for soft tissue substitution especially in pressure sensitive areas • Conical liner shape for better adaption to most stump conditions • Available with distal connection for all pin types and lock series sold by Streifeneder ortho.production • Available without distal connection for targeted stump moulding and for vacuum socket technology (VST) • Excellently suited for prosthetic care of below-knee residual limbs, knee-ex articulations and above-knee residual limbs • For users with difficult stumps and low to medium activity Socket Comfort – Gel Liners Socket Comfort – Gel Liners

Benefits of Gel-Liners Hints for the technician / user Streifeneder Polymer Gel has been dermatologically tested, inhibits bacteria and is hydro allergenic. It absorbs pressure, is protective and has a skin-care effect and therefore makes the Contex-Gel-Liner very comfortable.

Gel-Liner require softly moulded prosthetic sockets! Edgy moulded socket shapes create possible pressure points at small surfaces, which may lead to premature material fatigue. Sharp prosthetic socket edges also cause premature tear of the ContexGel products. Please consider this when manufacturing the prosthetic socket and construct rounded edges. Do not select a liner too small, as this may reduce the shock absorption characteristics (see Contex-Gel-Liner measuring chart).

The liner should not be shortened more than 10 cm circular above the socket edge. Before first use, all Contex-Gel products must be cleaned with Skin-Care-Washing Lotion 10H2 and lots of warm water. Generally, daily cleaning of the Contex-Gel-Liner resp. the Contex-Gel-Knee Sleeve is mandatory.

Please sensitize the users for these recommendations.

All products made of Streifeneder polymer gel are easy to clean. Cleaning does not affect their features. For cleaning, we recommend our pH-neutral washing lotion 10H2 and lots of warm water to rinse off the soap. After washing, the Contex-Gel-Liner is dried on the supplied liner stand. Usually, washing is done every evening / day, so enable the liner to dry at night. Socket Comfort – Gel Liners

ContexGel.basic ContexGel-Liner, 3 mm, made of soft ContexGel

Designated use • activity level (walky): 1 to 3 • for above-knee and below-knee amputees • suitable to substitute soft tissue at the residual limb end • for bony, pressure sensitive or difficult leg stumps

Characteristics • thermoplastic mouldable at 60 °C (140 °F) • optimal wearing comfort and good shock absorption in the entire stump area • especially soft functional textile cover for easily rolling the liner up or down • functional textile cover minimises longitudinal expansion • excellent circular expansion adjusts to volume changes at the residual limb • distal rotation control supports guidance of prosthesis • available with distal connections for all Streifeneder pin types and locking systems • available without distal connections for vacuum system technology (VST)

Material • wall thickness: 3 mm, conical shape • soft ContexGel with medical white oil, antibacterially fitted • approx. 25 – 30 Shore 00 • abrasion-proof textile cover made of polyamide / elastane • item 20L100 with PUR-rotation control • colour: anthracite

Warranty • 6 months

Size Distal Proximal Distal Item-No. connection S 16 - 23 cm 25 - 36 cm with 20L100/S M 19 - 30 cm 30 - 43 cm with 20L100/M L 24 - 34 cm 38 - 58 cm with 20L100/L XL 28 - 39 cm 41 - 63 cm with 20L100/XL XXL 32 - 44 cm 43 - 69 cm with 20L100/XXL S 16 - 23 cm 25 - 36 cm without 20L200/S M 19 - 30 cm 30 - 43 cm without 20L200/M L 24 - 34 cm 38 - 58 cm without 20L200/L XL 28 - 39 cm 41 - 63 cm without 20L200/XL XXL 32 - 44 cm 43 - 69 cm without 20L200/XXL

Scope of supply does include stand.

Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner size in the area of the distal and Total length: approx. 420 mm proximal stump circumference according to the chart. The care of transtibial stumps with ContexGel-Liners without distal connection require the ContexGel Knee Sleeve (item-no. 30L1).

www.streifeneder.com/op 143 Socket Comfort – Gel Liners Socket Comfort – Gel Liners

ContexGel.basic ContexGel-Liner, 3 mm, made of soft ContexGel, with outer matrix

Characteristics • thermoplastic mouldable at 60 °C (140 °F) • optimal wearing comfort and good shock absorption in the entire stump area • especially soft functional textile cover for easily rolling the liner up or down • outer matrix limits longitudinal stroke in the distal area • functional textile cover minimises longitudinal expansion • excellent circular expansion adjusts to volume changes at the residual limb • distal rotation control supports guidance of prosthesis • available with distal connections for all Streifeneder pin types and locking systems • available without distal connections for vacuum system technology (VST)

Material • wall thickness: 3 mm, conical shape • soft ContexGel with medical white oil, antibacterially fitted • approx. 25 – 30 Shore 00 • abrasion-proof textile cover made of polyamide / elastane • item 25L100 with PUR-rotation control • colour: anthracite

Warranty • 6 months

Size Distal Proximal Distal Item-No. connection S 16 - 23 cm 25 - 36 cm with 25L100/S M 19 - 30 cm 30 - 43 cm with 25L100/M L 24 - 34 cm 38 - 58 cm with 25L100/L XL 28 - 39 cm 41 - 63 cm with 25L100/XL XXL 32 - 44 cm 43 - 69 cm with 25L100/XXL S 16 - 23 cm 25 - 36 cm without 25L200/S M 19 - 30 cm 30 - 43 cm without 25L200/M L 24 - 34 cm 38 - 58 cm without 25L200/L XL 28 - 39 cm 41 - 63 cm without 25L200/XL XXL 32 - 44 cm 43 - 69 cm without 25L200/XXL

Scope of supply does include stand.

Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner size in the area of the distal and proximal stump circumference according to the chart. The care of transtibial stumps with ContexGel-Liners without distal connection require the ContexGel Knee Sleeve (item-no. 30L1). approx. 80

Total length: approx. 420 mm

144 www.streifeneder.com/op Socket Comfort – Gel Liners Socket Comfort – Gel Liners

ContexGel.soft ContexGel-Liner, anterior wall thickness 6 mm, posterior wall thickness 3 mm, made of soft ContexGel

Designated use • activity level (walky): 1 to 3 • for above-knee and below-knee amputees • suitable to substitute soft tissue at the tibia edge and stump end • for bony and difficult leg stumps

Characteristics • thermoplastic mouldable at 60 °C (140 °F) • optimal wearing comfort and very good shock absorption in the anterior stump area • especially soft functional textile cover for easily rolling the liner up or down • thinner wall thickness in the posterior dorsal area improves knee flexion at prosthetic socket • functional textile cover minimises longitudinal expansion • excellent circular expansion adjusts to volume changes at the residual limb • distal rotation control supports guidance of prosthesis • available with distal connection for all Streifeneder pin types and locking systems • available without distal connection for vacuum system technology (VST)

Material • anterior wall thickness 6 mm, posterior wall thickness 3 mm, conical shape • soft ContexGel with medical white oil, antibacterially fitted • approx. 25 – 30 Shore 00 • abrasion-proof textile cover made of polyamide / elastane • item 21L100 with PUR-rotation control • colour: anthracite

Warranty • 6 months

Size Distal Proximal Distal Item-No. connection S 16 - 23 cm 25 - 36 cm with 21L100/S M 19 - 30 cm 30 - 43 cm with 21L100/M L 24 - 34 cm 38 - 58 cm with 21L100/L XL 28 - 39 cm 41 - 63 cm with 21L100/XL XXL 32 - 44 cm 43 - 69 cm with 21L100/XXL S 16 - 23 cm 25 - 36 cm without 21L200/S M 19 - 30 cm 30 - 43 cm without 21L200/M L 24 - 34 cm 38 - 58 cm without 21L200/L XL 28 - 39 cm 41 - 63 cm without 21L200/XL XXL 32 - 44 cm 43 - 69 cm without 21L200/XXL

Scope of supply does include stand. Total length: approx. 420 mm Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner size in the area of the distal and proximal stump circumference according to the chart. The care of transtibial stumps with ContexGel-Liners without distal connection require the ContexGel Knee Sleeve (item-no. 30L1).

www.streifeneder.com/op 145 Socket Comfort – Gel Liners Socket Comfort – Gel Liners

ContexGel.soft ContexGel-Liner, anterior wall thickness 6 mm, posterior wall thickness 3 mm, made of soft ContexGel, with outer matrix

Characteristics • thermoplastic mouldable at 60 °C (140 °F) • optimal wearing comfort and very good shock absorption in the anterior stump area • especially soft functional textile cover for easily rolling the liner up or down • outer matrix limits longitudinal stroke in the distal area • thinner wall thickness in the posterior dorsal area improves knee flexion at prosthetic socket • functional textile cover minimises longitudinal expansion • excellent circular expansion adjusts to volume changes at the residual limb • distal rotation control supports guidance of prosthesis • available with distal connection for all Streifeneder pin types and locking systems • available without distal connection for vacuum system technology (VST)

Material • anterior wall thickness 6 mm, posterior wall thickness 3 mm, conical shape • soft ContexGel with medical white oil, antibacterially fitted • approx. 25 – 30 Shore 00 • abrasion-proof textile cover made of polyamide / elastane • item 26L100 with PUR-rotation control • colour: anthracite

Warranty • 6 months

Size Distal Proximal Distal Item-No. connection S 16 - 23 cm 25 - 36 cm with 26L100/S M 19 - 30 cm 30 - 43 cm with 26L100/M L 24 - 34 cm 38 - 58 cm with 26L100/L XL 28 - 39 cm 41 - 63 cm with 26L100/XL XXL 32 - 44 cm 43 - 69 cm with 26L100/XXL S 16 - 23 cm 25 - 36 cm without 26L200/S M 19 - 30 cm 30 - 43 cm without 26L200/M L 24 - 34 cm 38 - 58 cm without 26L200/L XL 28 - 39 cm 41 - 63 cm without 26L200/XL XXL 32 - 44 cm 43 - 69 cm without 26L200/XXL

Scope of supply does include stand.

Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner size in the area of the distal and proximal stump circumference according to the chart. The care of

approx. 80 transtibial stumps with ContexGel-Liners without distal connection require the ContexGel Knee Sleeve (item-no. 30L1).

Total length: approx. 420 mm

146 www.streifeneder.com/op Socket Comfort – Gel Liners Socket Comfort – Gel Liners

ContexGel.soft+ ContexGel-Liner, anterior wall thickness 9 mm, posterior wall thickness 3 mm, made of soft ContexGel

Designated use • activity level (walky): 1 to 3 • for above-knee and below-knee amputees • suitable to substitute soft tissue at the tibia edge and stump end • for bony, very pressure sensitive or difficult leg stumps

Characteristics • thermoplastic mouldable at 60 °C (140 °F) • optimal wearing comfort and excellent shock absorption in the anterior stump area • especially soft functional textile lining for easily rolling the liner up or down • thinner wall thickness in the posterior dorsal area improves knee flexion at prosthetic socket • functional textile lining minimises longitudinal expansion • excellent circular expansion adjusts to volume changes at the residual limb • distal rotation control supports guidance of prosthesis • available with distal connections for all Streifeneder pin types and locking systems • available without distal connections for vacuum system technology (VST)

Material • wall thickness: anterior wall thickness 9 mm, posterior wall thickness 3 mm, conical shape • soft ContexGel with medical white oil, antibacterially fitted • approx. 25 – 30 Shore 00 • abrasion-proof textile cover made of polyamide / elastane • item 22L100 with PUR-rotation control • colour: anthracite

Warranty • 6 months

Size Distal Proximal Distal Item-No. connection S 16 - 23 cm 25 - 36 cm with 22L100/S M 19 - 30 cm 30 - 43 cm with 22L100/M L 24 - 34 cm 38 - 58 cm with 22L100/L XL 28 - 39 cm 41 - 63 cm with 22L100/XL XXL 32 - 44 cm 43 - 69 cm with 22L100/XXL S 16 - 23 cm 25 - 36 cm without 22L200/S M 19 - 30 cm 30 - 43 cm without 22L200/M L 24 - 34 cm 38 - 58 cm without 22L200/L XL 28 - 39 cm 41 - 63 cm without 22L200/XL XXL 32 - 44 cm 43 - 69 cm without 22L200/XXL

Total length: approx. 420 mm Scope of supply does include stand. Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner size in the area of the distal and proximal stump circumference according to the chart. The care of transtibial stumps with ContexGel-Liners without distal connection require the ContexGel Knee Sleeve (item-no. 30L1).

www.streifeneder.com/op 147 Socket Comfort – Gel Liners

ContexGel.soft+ ContexGel-Liner, anterior wall thickness 9 mm, posterior wall thickness 3 mm, made of soft ContexGel, with outer matrix

Characteristics • thermoplastic mouldable at 60 °C (140 °F) • optimal wearing comfort and excellent shock absorption in the anterior stump area • especially soft functional textile lining for easily rolling the liner up or down • thinner wall thickness in the posterior dorsal area improves knee flexion at prosthetic socket • functional textile lining minimises longitudinal expansion • outer matrix limits longitudinal stroke in the distal area • excellent circular expansion adjusts to volume changes at the residual limb • distal rotation control supports guidance of prosthesis • available with distal connections for all Streifeneder pin types and locking systems • available without distal connections for vacuum system technology (VST)

Warranty • 6 months

Size Distal Proximal Distal Item-No. connection S 16 - 23 cm 25 - 36 cm with 27L100/S M 19 - 30 cm 30 - 43 cm with 27L100/M L 24 - 34 cm 38 - 58 cm with 27L100/L XL 28 - 39 cm 41 - 63 cm with 27L100/XL XXL 32 - 44 cm 43 - 69 cm with 27L100/XXL S 16 - 23 cm 25 - 36 cm without 27L200/S M 19 - 30 cm 30 - 43 cm without 27L200/M L 24 - 34 cm 38 - 58 cm without 27L200/L XL 28 - 39 cm 41 - 63 cm without 27L200/XL XXL 32 - 44 cm 43 - 69 cm without 27L200/XXL

Scope of supply does include stand.

Sizing: Measure the distal circumference approx. 4 cm above the stump end and select the liner size in the area of the distal and

approx. 80 proximal stump circumference according to the chart. The care of transtibial stumps with ContexGel-Liners without distal connection require the ContexGel Knee Sleeve (item-no. 30L1).

Total length: approx. 420 mm

148 www.streifeneder.com/op Socket Comfort – Application Aids

The application aids ContexGel.Knee Sleeve (30L1 and 30L5), AK- and BK-Suspenders (300A1 and 23A1) by Streifeneder ortho.production provide correct support and position of leg prostheses. Especially in vacuum socket technology (VST) for below-knee short prostheses, a closed system without air intrusion is very important. The ContexGel.Knee Sleeve works like a knee- resp. sealing cap; and prevents intrusion of air and together with the exhaust valve (6P50, Active.valve) safely holds the leg prosthesis at the residual limb of the user.

exhaust phase – the compressed air is released through the valve

comfort phase – the vacuum can be regulated by pressing the button

When standing up and in stance phase, the exhaust valve provides a continuous vacuum, which prevents the leg prosthesis from slipping away and therefore minimizes uncomfortable shear- and friction forces on the residual limb. Defined pressure balance can be achieved by using the easy-to-reach pressure button; to take load off the prosthesis user‘s residual limb, e.g. while sitting.

Traditional varieties of prosthetic applications can be found in a modern version in our AK-Suspenders and BK-Suspenders. These so-called holding supports for above-knee and below-knee prostheses also provide correct connections and at the same time support the guidance of leg prostheses.

Benefits for the user • Easier putting the prosthesis on and better wearing guidance of the prosthesis with our without exhaust valve or liner system • Slip resistant materials at the inside prevent slipping of the prosthetic socket • Stable and reinforced transversely elastic fabrics optimally adapt to the stump shape • W ide range of size variety covers individual user conditions Socket Comfort – Application Aids Socket Comfort – Application Aids

ContexGel.sleeve ContexGel knee sleeve, 3 mm uniform

Designated use • ContexGel-Knee Sleeves are suitable for below-knee amputees as knee holding support or as sealing cap for vacuum-socket technology (VST) • additional guidance for the knee and stabilisation for short prostheses • smaller sizes are used as holding supports in arm prosthetics

Characteristics • thermoplastic mouldable at 60 °C • satined knee area prevents tension sensations in the knee joint area • for optimal hold in the distal and proximal area • especially soft functional textile cover for easily rolling the liner up or down • functional textile cover minimises elongation • excellent circular expansion adjusts to the socket- and stump-anatomy • product recommendation additionally for vacuum-socket technology (VST)

Material • wall thickness: 3 mm, conical form • soft ContexGel with medical white oil, antibacterially fitted • approx. 25 – 30 Shore 00 • abrasion-proof textile cover made of polyamide / elastane • colour: anthracite 30L1 / sand 30L5

Warranty • 3 months

Colour: Anthracite Size Distal Proximal Length Item-No. S 15 - 23 cm 23 - 35 cm 37 cm 30L1/S M 21 - 31 cm 29 - 44 cm 37 cm 30L1/M L 28 - 43 cm 36 - 52 cm 38,5 cm 30L1/L XL 34 - 48 cm 42 - 58 cm 38,5 cm 30L1/XL XXL 38 - 52 cm 43 - 64 cm 38,5 cm 30L1/XXL

Colour: Sand Size Distal Proximal Length Item-No. S 15 - 23 cm 23 - 35 cm 37 cm 30L5/S M 21 - 31 cm 29 - 44 cm 37 cm 30L5/M Satined knee area of the inner surface L 28 - 43 cm 36 - 52 cm 38,5 cm 30L5/L XL 34 - 48 cm 42 - 58 cm 38,5 cm 30L5/XL XXL 38 - 52 cm 43 - 64 cm 38,5 cm 30L5/XXL

Sizing: ContexGel Knee Sleeves are available in 6 sizes. If possible, please position the sleeve with its middle at the MTP. Also taking measurements for the thigh circumference should start at this point 15 cm towards proximal. This will determine the optimal size of the knee sleeve for the patient.

www.streifeneder.com/op 151 Socket Comfort – Application Aids Socket Comfort – Application Aids

ContexGel.protect Protective cover for ContexGel.sleeve

Designated use • protective cover for sharp-edged prosthetic sockets

Characteristics • expandable protective cover prevents premature tear of the ContexGel knee sleeves • the protective cover is worn underneath the ContexGel knee sleeve • the distal inner side is equipped with a silicone edge, which prevents slipping at the prosthetic socket • additional adhering not necessary

Material • durable and expandable funtional fabric, made of polyurethane / polyamide / elastane • colour: black

Warranty • 6 months

Size Side For knee Length Item-No. sleeve S universal size S 19 cm 3S50/S M universal size M 19 cm 3S50/M L universal size L 22 cm 3S50/L XL universal size XL + 22 cm 3S50/XL XXL

152 www.streifeneder.com/op Socket Comfort – Application Aids Socket Comfort – Application Aids

AK-Suspender AK-Prosthesis Support

Designated use • fixes a prosthesis at the user‘s pelvis and prevents slipping of the prosthesis from the residual limb • the suspender is used to support above-knee (AK-) suspension sockets, if sufficient vacuum cannot be achieved

Characteristics • facilitates putting the prosthesis on and improves guidance during wearing the AK-prosthesis without rubber valve or liner system • slip resistant, elastic neoprene at the inside of the leg section adheres to the socket • stable, reinforced transversely elastic material in the pelvic / hip area optimally adjusts to the body shape • individual adjustment options by two frontal hook- and loop fasteners

Material • leg section: 100 % neoprene (cellular rubber), outer textile lining: 100 % polyamide (PA) • pelvic section: 46 % polyamide (PA), 30 % viscose (CV), 24 % elasthane (EL) • colour: silver/anthracite • machine washable at 30 °C

Size Hip circ. Circ. Side Item-No. medial/ socket edge S 60 - 74 cm 36 - 40 cm right 300A1/RS M 66 - 80 cm 40 - 44 cm right 300A1/RM L 76 - 90 cm 44 - 48 cm right 300A1/RL Scope of supply does not include components. XL 86 - 100 cm 48 - 52 cm right 300A1/RXL XXL 96 - 110 cm 52 - 56 cm right 300A1/RXXL S 60 - 74 cm 36 - 40 cm left 300A1/LS M 66 - 80 cm 40 - 44 cm left 300A1/LM L 76 - 90 cm 44 - 48 cm left 300A1/LL XL 86 - 100 cm 48 - 52 cm left 300A1/LXL XXL 96 - 110 cm 52 - 56 cm left 300A1/LXXL

www.streifeneder.com/op 153 Socket Comfort – Application Aids Socket Comfort – Application Aids

BK-Suspender Knitted Holding Aid for BK-prostheses

Designated use • additional fixation of the BK-prosthesis at the leg; prevents slipping of the prosthesis of the residual limb • supports the prosthesis guidance • supports and takes load off the knee joint capsule when wearing a short prosthesis

Characteristics • maximum vertical elasticity, nearly no horizontal elasticity • anatomical, flectional shape

Material • 75 % PA polyamid, 25 % EL elastan (without latex) • colour: silver/anthracite

Warranty • 3 months

PU = 2 pcs.

Size Circ. distal Circ. Length Item-No. Scope of supply does not include components. proximal S 26 - 30 cm 34 - 38 cm 35 cm 23A1/S M 29 - 33 cm 38 - 42 cm 35 cm 23A1/M L 32 - 36 cm 42 - 46 cm 35 cm 23A1/L XL 35 - 39 cm 46 - 50 cm 35 cm 23A1/XL

For right and left side.

Suspension Sleeve -double stretch-

• for additional ﬁxation of trans-tibial prostheses • extra elastic in the knee area • skin colour

Below Circumf. Above Item-No. 280 mm 310 mm 410 mm 20A1/S 295 mm 325 mm 425 mm 20A1/M 310 mm 340 mm 440 mm 20A1/L 325 mm 355 mm 455 mm 20A1/XL

Rubber Suspension Sleeve

• for swimming/bathing prostheses • with reinforcement at top and bottom

Length Proximal Distal Item-No. 450 mm 360 mm 200 mm 4P70/K 450 mm 380 mm 230 mm 4P70/M 450 mm 400 mm 230 mm 4P70/G

154 www.streifeneder.com/op Socket Comfort – Application Aids Socket Comfort – Application Aids

Slide.ﬁt Slip-on aid for above knee prostheses

Designated use • slip-on aid for above knee prostheses (for suspension sockets)

Characteristics • the gliding material surface of the slip-on aid simplifies putting on the above-knee prosthesis • long and stiffened sliding aid simplifies application through valve opening of the prosthetic socket • due to the large grip-tongue, pulling out through the valve opening becomes more energy-saving • contrast colour stitching for size identification

Material • fabric: 100 % PA polyamide • coating: 100 % PUR polyurethane

Warranty • 3 months

PU = 1 pc. with storage bag

Stump circ. Stump circ. Length of Colour Item-No. distal up to proximal up donning (B) to (A) aid 24 cm 40 cm 43 cm yellow 17A1/XS 26 cm 44 cm 50 cm red 17A1/S 28 cm 56 cm 50 cm dark blue 17A1/M 30 cm 68 cm 50 cm green 17A1/L 36 cm 76 cm 52 cm light blue 17A1/XL 38 cm 88 cm 60 cm orange 17A1/XXL

DAW-Slipper Slip-on aid for above knee prostheses

Designated use • slip-on aid for above knee prostheses (for suspension sockets)

Characteristics • the soft inside feels comfortable on the skin • the smooth outside helps sliding into the prosthesis easier • loop approx. 80 cm long, reinforced distal end with seam • original DAW product

Material • 100 % PA (nylon), colour: white • very fine, thin quality, open knitted • the knitting technique prevents ladders • machine washable at 30 °C

AK-circumference Length Item-No. 26 - 32 cm 50 cm 13A2/1 33 - 40 cm 50 cm 13A2/2 41 - 50 cm 50 cm 13A2/3 51 - 60 cm 50 cm 13A2/4 61 - 70 cm 50 cm 13A2/5

AK-circumference must be measured at the height of the upper prosthesis socket.

www.streifeneder.com/op 155 Socket Comfort – Application Aids

Streifycone for Soft-Socket

Designated use • pre-fabricated conus with distal end cap for time-saving production of soft- sockets • the material Streifyfoam (expanded soft-polyethylene) is optimally thermoplastic mouldable at 130 °C

Characteristics • does not shrink, features excellent restoring force and is easily cleaned with ph-neutral soapy water • closed-cell foam material and therefore very hygienic and non-irritant to the skin

Material • thickness: 5 mm, Shore A 35 – 40 • height: 425 mm for all sizes

Distal Proximal Ø distal end Size Item-No. circumference circumference cap 190 mm 390 mm 116 mm S 6S1/S 230 mm 420 mm 136 mm M 6S1/M 260 mm 470 mm 136 mm L 6S1/L

Heat lying ﬂat in the infrared-oven 50M25 or standing upright in the heating cabinet 50M2 at 130 °C for approx. 3 – 5 minutes, then pull it over the dry cast model. For bonding the distal end cap, it is best to use our forte contact glue 118P13.

156 www.streifeneder.com/op Socket Comfort – Care Products & Accessories

In addition to the right liner, stump sock or sheath the gentle care and cleaning is important for high wearing comfort and skin protection. The care products from Streifeneder help the user to protect liner and skin, offer maximum hygiene and are easy to use. Socket Comfort – Care Products & Accessories Socket Comfort – Care Products & Accessories

Stump Care Agent PC30V

• stump care cream for external application, for the wearers of prostheses, as well as of other orthopaedic appliances and accessories • prevents pressure and rubbing zones • also conditions and strengthens the skin • applicable for decubitus prophylaxis • free of skin irritating substances

Volume Item-No. 100 ml 10H1/100 250 ml 10H1/250

Skin Care Washing Lotion

• cleans skin, prostheses, orthoses and liners with gentle care • prevents skin irritations • pH-neutral • prevents body odour

Volume Item-No. 250 ml 10H2

Skin Care Skin Protection Cream

Material • silicoderm F, based on silicone-oil

Application • skin protection especially prior to and after casting works

Characteristics • develops an efficient protective film • protects the physiological acid film • economical use

PU = 1 tube

Content Item-No. 35 ml 10H3

Skin Care Moisturising Lotion

• conditions and regenerates dry and stressed skin • protects against pressure and rubbing • soothes skin irritations • reduces sweat and odour

Volume Item-No. 250 ml 10H4

www.streifeneder.com/op 159 Socket Comfort – Care Products & Accessories

Skin Care Spray

• for easier putting on silicone liners without textile covers • the silicone liner receives a slide-on layer with the spray • optimal grip by rapid vaporescence

Volume Item-No. 200 ml 10H5 Reﬁll bottle for Skin Care Spray 1000 ml 10H5/1

Disinfection Gel for Hands

• cleans hands without water • active ingredient concentrated ethanol, which grants the elimination of bacteria on the skin surface by its disinfecting effect • glycerol provides necessary moisture to the skin

Volume Item-No. 100 ml 10H7/100

Rotary Cutter

• cuts textile and liner material without difﬁculty • the rotary blade faciliates contouring accuracy • blade diameter 45 mm

Item-No. 166P55

Replacement Blade for Rotary Cutter

• for item 166P55

Cut of blade Diameter Item-No. straight 45 mm 166P55/1

160 www.streifeneder.com/op Socket Comfort – Stump Care

The demands on a stump sock are very high and manifold. The outer surface should be as smooth as possible, yet hard-wearing; while the collar should be elastic and prevent incisions of the skin. When directly worn on the skin, breathability, anti-allergic properties, rapid drying, good adherence and close meshed textiles are desirable to protect against friction. Stump socks from Streifeneder are available in various designs depending on the desired use – e.g. made of terrycloth, cotton or nylon, or suitable for ak-, bk- or arm-stumps.

With our exclusive selection of DAW protection covers, we offer protective covers with appraised quality and reliability. The exceptionally thin seam – a special trademark- distinguishes the nylon DAW protection cover. The use of new manufacturing machines allows for a yet improved and even more regular knitting pattern.

Sharp-edged socket trim lines result in premature wear of the stump sock. Therefore, please make sure to manufacture round edges. Please take into account that the hem of the DAW nylon protective cover (10 cm) is not to be measured when determining the length. This hem is turned back over the rim of the socket to prevent the sock from sliding into the socket. At the same time, it covers the socket trim line and thereby protects the clothing.

• Available with or without pin hole, in different thicknesses, materials and colours • Large selection of stump socks for above-knee, below-knee and arm stumps • Increases durability life of gel liners • Postoperative compression therapy • Compensates stump volume changes • Additional cushioning towards liner or inner socket • Thermoactive • Long-lasting Socket Comfort – Streifyderm

Streifyderm refers to our cushioning stump socks with integrated polymer gel. With the Streifyderm stump socks, Streifeneder ortho.production is able to offer additional high-quality products for a below the knee prosthetic fitting. Streifeneder stump socks stand out due to their excellent combination of elastic nylon fabric (“Spandex”) and softly cushioning polymer gel.

Please wash all socks with mild, pH-neutral soap and lukewarm water.

The polymer-gel contains medical mineral oils, that offer the following advantages • Nurturing the skin through constant release of mineral oils during wearing. • Reduction of mechanical stress (shearing forces) on the already particularly stressed stump skin. • Cushions and protects particularly delicate stump areas such as the edge of the shinbone, fibula head and the end of the residual limb. • Has a pressure discharging effect on the above mentioned stump areas. • Adaption of the Streifyderm stump socks to the stump shape in the course of wear. Socket Comfort – Compression Stump Socks

In order to reduce the post-operative oedema after an amputation, the attending physician will prescribe a compressing stump sock therapy. The compression stump socks (shrinkers) are used to reduce the post-operative swelling and to bring the residual limb into proper shape and constant volume. Depending on the size of the oedema and the pressure sensitivity of the user, two different compression classes are available (compression class Ccl. 1 = light compression; compression class Ccl. 2 = medium compression). Regular use of the compression stump sock provides correct modelling of the residual limb and preparation of the limb for the prosthesis. Mainly, the goal is to achieve a cylindrical or conical shape of the residual limb; which will simplify putting on the leg prosthesis; resp. the compression socks will prevent development of new oedemas after taking the leg prosthesis off.

Please use our chart „compression therapy“ in the instruction manual to note the daily volume of the residual limb. Users sensitive to pressure can also wear two compression socks of compression class Ccl. 1 (light) over each other to increase the effect. To simplify putting on the compression stump socks, please wear rubber gloves. Please inform your customer that long fingernails or sharp-edged rings may damage the compression stump sock. Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Stump Sock StreifyDerm 2 mm polymer gel

• stump sock for the prosthetic provisioning of the lower extremities • stump sock consisting of nylon textures and coated with 2 mm polymer gel

Gel length/ Stump Circ. distal Circ. Item-No. size length proximal 20 cm / 1 25 - 34 cm 17 - 24 cm 17 - 26 cm 26A10/1 25 cm / 2 38 - 44 cm 18 - 28 cm 18 - 32 cm 26A10/2 25 cm / 3 38 - 44 cm 20 - 34 cm 20 - 38 cm 26A10/3 33 cm / 4 43 - 49 cm 20 - 34 cm 20 - 38 cm 26A10/4 25 cm / 5 43 - 49 cm 23 - 37 cm 23 - 43 cm 26A10/5 33 cm / 6 46 - 54 cm 23 - 37 cm 23 - 43 cm 26A10/6 33 cm / 7 46 - 54 cm 28 - 42 cm 28 - 49 cm 26A10/7 33 cm / 8 46 - 54 cm 31 - 50 cm 31 - 56 cm 26A10/8

Stump Sock StreifyDerm Cushion 3 mm polymer gel

• for the prosthetic provisioning of the lower extremities • consisting of nylon texture and coated with 3 mm polymer gel

Gel length / Stump Circ. distal Circ. Item-No. size length proximal 20 cm / 1 25 - 34 cm 17 - 24 cm 17 - 26 cm 26A20/1 25 cm / 2 38 - 44 cm 18 - 28 cm 18 - 32 cm 26A20/2 25 cm / 3 38 - 44 cm 20 - 34 cm 20 - 38 cm 26A20/3 33 cm / 4 43 - 49 cm 20 - 34 cm 20 - 38 cm 26A20/4 25 cm / 5 43 - 49 cm 23 - 37 cm 23 - 43 cm 26A20/5 33 cm / 6 46 - 54 cm 23 - 37 cm 23 - 43 cm 26A20/6 33 cm / 7 46 - 54 cm 28 - 42 cm 28 - 49 cm 26A20/7 33 cm / 8 46 - 54 cm 31 - 50 cm 31 - 56 cm 26A20/8

Stump Sock StreifyDerm Endurance two nylon textures and 2 mm polymer gel

• for the prosthetic provisioning of the lower extremities • consisting of two nylon textures and with 2 mm polymer gel in between

Gel length / Stump Circ. distal Circ. Item-No. size length proximal 20 cm / 1 25 - 34 cm 17 - 24 cm 17 - 26 cm 26A30/1 25 cm / 2 38 - 44 cm 18 - 28 cm 18 - 32 cm 26A30/2 25 cm / 3 38 - 44 cm 20 - 34 cm 20 - 38 cm 26A30/3 33 cm / 4 43 - 49 cm 20 - 34 cm 20 - 38 cm 26A30/4 25 cm / 5 43 - 49 cm 23 - 37 cm 23 - 43 cm 26A30/5 33 cm / 6 46 - 54 cm 23 - 37 cm 23 - 43 cm 26A30/6 33 cm / 7 46 - 54 cm 28 - 42 cm 28 - 49 cm 26A30/7 33 cm / 8 46 - 54 cm 31 - 50 cm 31 - 56 cm 26A30/8

www.streifeneder.com/op 165 Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Below-Knee Compression Stocking with silicone-knops grip top, antibacterially ﬁtted

Mode of action • compression therapy; the respective compression class is determined by the responsible medical doctor. Standard-compression pressure for compression class 1 (light) is 18 - 21 mm Hg, (2,4 - 2,8 hPa); for compression class 2 (medium) it is 23 - 32 mm Hg, (3,1 - 4,3 hPa)

Indication • for reduction of post-surgical oedema after below-knee amputation • for preparation and plaster-casting of the residual limb for the prosthesis • for oedemata prevention after taking the leg prosthesis off

Contraindication • open wounds • non-reducible oedemata • stasis dermatitits (dermatitis varicosa) • peripheral artery occlusive disease (PAOD) • thrombophlebitis acuta • decompensated heart insufficience

Material • 78 % polyamide • 22 % elastane • with silicone-knobs grip top

Size Circ. f Circ. e Circ. c Length L XS 41 cm 31 cm 29 cm 30, 38, 46 cm S 44 cm 34 cm 32 cm 30, 38, 46 cm M 47 cm 37 cm 35 cm 30, 38, 46 cm L 50 cm 40 cm 38 cm 30, 38, 46 cm XL 53 cm 43 cm 41 cm 30, 38, 46 cm XXL 56 cm 46 cm 44 cm 30, 38, 46 cm

Compression class 1: 452A1 + size + length / Compression class 2: 452A2 + size + length Ordering example: 452A1/XS30 = compression class 1, size XS, length 30 cm

f For documentation of the volume, use the chart in the instruction L manual.

166 www.streifeneder.com/op Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Above-Knee Compression Stocking with hip attachment, antibacterially ﬁtted

Mode af action • compression therapy; the respective compression class is determined by the responsible medical doctor. Standard-compression pressure for compression class 1 (light) is 18 - 21 mm Hg, (2,4 - 2,8 hPa); for compression class 2 (medium) it is 23 - 32 mm Hg, (3,1 - 4,3 hPa)

Indication • for reduction of post-surgical oedema after above-knee amputation • for preparation and plaster-casting of the residual limb for the prosthesis • for oedemata prevention after taking the leg prosthesis off

Material • 78 % polyamide • 22 % elastane • with hip attachment

Size Circ. g Circ. e Length L XS 44 cm 31 cm 20, 25, 30, 35 cm S 48 cm 34 cm 20, 25, 30, 35 cm M 52 cm 37 cm 20, 25, 30, 35 cm L 56 cm 40 cm 20, 25, 30, 35 cm XL 60 cm 43 cm 20, 25, 30, 35 cm XXL 64 cm 46 cm 20, 25, 30, 35 g cm L

Compression class 1: 451A1 + size + length / Compression class 2: e 451A2 + size + length Ordering example: 451A1/XS20 = compression class 1, size XS, length 20 cm

For documentation of the volume, use the chart in the instruction manual.

www.streifeneder.com/op 167 Socket Comfort – Stump Socks Socket Comfort – Stump Socks

DAW-Nylon-Sheath standard type, conical universal shape

Designated use • the DAW nylon sheath is worn directly on the skin to keep the skin dry and to prevent irritation by reducing friction, which provides better adhesion between skin and prosthesis • optimal compression of the tissue, therefore ideal support of blood reflux and stimulation of the capillary vessels

Material • 100 % PA (nylon) • colour: white • fine, smooth and openly knitted quality • the knitting technique prevents ladders • machine washable at 30 °C

Form Length in cm Item-No. A 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75 25A50/A.. B 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 25A50/B.. C 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75 25A50/C.. D 20, 25, 30, 35, 40, 45, 50, 55, 60, 65 25A50/D.. E 20, 25, 30, 35, 40, 45, 50 25A50/E..

Forms Form Stump circ.* Approx. width above x below sheath A 40-50 cm 15 x 9 cm, 20 x 10 cm Dimension sketch: B 50-60 cm 20 x 10 cm C more than 60 cm 25 x 17 cm folding rim of approx. D 30-40 cm 15 x 9 cm 10 cm ﬂattened E up to 30 cm arm stump sock width above

stump Ordering example: 25A50/A20 = form A, length20 cm circumference Size determination: *The circumference of the stump resp. upper thigh must be measured at the upper edge of the prosthesis. The measured circumference determines the sheath form (A, B, C, D). length of The length of the sheath must also be measured from the upper sheath edge of the prosthesis, to the tip of the sheath. The sheath has a folding rim of approx. 10 cm. The rim must not be considered in the dimensions!

ﬂattened width below 5 – 6 cm

Forms:

AB C ED

168 www.streifeneder.com/op Socket Comfort – Stump Socks Socket Comfort – Stump Socks

DAW-Nylon-Sheath for knee disarticulation

Characteristics • the soft inner surface is comfortable on the skin • the whipped seam of the cuff marks the outside • the smooth outside facilitates getting into the prosthesis resp. makes it easier to put on additional sock • the special contour at the distal end optimally adapts to the anatomical shape of the knee disarticulation residual limb

Material • 100 % PA (nylon) • colour: white • very fine, smooth and openly knitted quality • machine washable at 30 °C

Form Thigh circ. Knee circ. Length in cm Item-No. A up to 50 cm up to 35 cm 40, 45, 50, 55 25A51/A.. B up to 60 cm up to 35 cm 40, 45, 50, 55 25A51/B..

Ordering example: 25A51/A40 = form A,length 40 cm

Size determination: The circumference of the stump resp. upper thigh must be measured at the upper edge of the prosthesis. The measured circumference determines the sheath form (A, B). The length of the sheath must also be measured from the upper edge of the prosthesis, to the tip of the sheath. The sheath has a folding rim of approx. 10 cm. The rim must not be considered in Dimension sketch: the dimensions!

folding rim of approx. 10 cm ﬂattened width above stump circumference

length of sheath

ﬂattened width below 5 – 6 cm

Forms:

www.streifeneder.com/op 169 Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Terrycloth Stump Sock for BK-amputees thick quality, straight shape

Designated use • very effective to even out differing volume, due to voluminous inside with terry-cloth loops • item-no. 25A10 with vulcanised rubber opening for pin, to be worn over any liner • item-no. 25A11 without opening for pin, may be worn directly on the skin or over any sheath, e.g. item-no. 25A50

Characteristics • very comfortable wear due to high cotton content • the terry-cloth loops on the inside provide excellent cushioning effect and climate management, since this voluminous type may store abundant moisture • very stretchable and yet dimensionally stable knitting technique

Material • 85 % (CO) cotton, 15 % (PA) textured (crinkled) polyamide silk • machine washable up to 60 °C

Length in cm Colour Item-No. Item-No. with hole without hole for pin for pin 20, 25, 30, 35, 40, 45, 50, 55, 60 blue 25A10/..B 25A11/..B 20, 25, 30, 35, 40, 45, 50, 55, 60 peach 25A10/..H 25A11/..H 20, 25, 30, 35, 40, 45, 50, 55, 60 black 25A10/..S 25A11/..S 20, 25, 30, 35, 40, 45, 50, 55, 60 turquois 25A10/..T 25A11/..T 20, 25, 30, 35, 40, 45, 50, 55, 60 white 25A10/..W 25A11/..W

Ordering example: 25A11/20B = without hole for pin, length 20 cm, colour blue. In colours green, yellow, purple or red available upon request.

If a cuff is desired, its length must be added to the stocking length. Dimension sketch: Size is determined by sock length only. For bigger circumferences stretched width of the residual limb, the sock length becomes shorter due to from... to...cm stretching.

The sock stretches from approx. 10 cm up to 20 cm.

desired folding rim

length of stump sock

170 www.streifeneder.com/op Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Terrycloth Stump Sock for BK-amputees thick quality, straight shape, with wool content

Designated use • very effective to even out differing volume, voluminous knit ware due to crinkled fibre • item-no. 25A12 with vulcanised rubber opening for pin, to be worn over any liner • item-no. 25A13 without opening for pin, may be worn directly on the skin or over any sheath e.g. item-no. 25A50

Characteristics • the terry-cloth loops on the inside provide excellent cushioning effect and climate management, since this voluminous type may store abundant moisture • very comfortable wear and warming effect due to wool content • during wearing, the stocking shape adapts to the individual shape of the residual limb

Material • 50 % (WO) wool, 25 % PA (acryl), 10 % PA (polyamid), 15 % (PA) textured (crinkled) polyamide silk • colour: off-white • machine washable up to 60 °C

Length in cm Type Item-No. 25, 35, 40, 45, 55, 65 with hole for pin 25A12/.. 25, 30, 35, 40, 45, 50, 55, 60, 65 without hole for pin 25A13/..

Ordering example: 25A12/25 = with hole for pin, length 25 cm

If a cuff is desired, its length must be added to the stocking length. Size is determined by sock length only. For bigger circumferences of the residual limb, the sock length becomes shorter due to stretching.

The sock stretches from approx. 10 cm up to 20 cm. Dimension sketch: stretched width from... to...cm

desired folding rim

length of stump sock

www.streifeneder.com/op 171 Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Terrycloth Stump Sock for BK-amputees extra thick quality, straight shape, with Lycra content

Designated use • very effective to even out differing volume, due to voluminous inside with terry-cloth loops • this type without opening for pin may be worn over any liner or directly on the skin • light compression effect, due to Lycra content • an additional sheath, e.g. item-no. 25A50 may be worn directly on the skin in order to keep the skin dry

Characteristics • extremely stretchable (more than double of unstretched width) due to Lycra content • very high dimensional stability by Lycra content, i.e. the material always retightens to its original shape • very comfortable wear due to high cotton content • the terry-cloth loops on the inside provide excellent cushioning effect and climate management, since this voluminous type may store abundant moisture

Material • 95 % (CO) cotton, 5 % (EL) elastane (Lycra) • colour: white • machine washable up to 60 °C

Length in cm Type Item-No. 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 75 without hole for pin 25A14/..

Ordering example: 25A14/20 = length 20 cm

Dimension sketch: The sock stretches from approx. 7,5 cm up to 19 cm. stretched width from... to...cm

desired folding rim

length of stump sock

172 www.streifeneder.com/op Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Cotton Stump Sock for BK-amputees thin, smooth quality, straight shape, with high elastane content

Designated use • item-no. 25A20 with vulcanised rubber opening for pin, to be worn over any liner • item-no. 25A21 without opening for pin, may be worn directly on the skin • effective to even out differing volume • light compression effect, due to high elastane content

Characteristics • very high stretching ability and shape stability due to high elastane content, i.e. the material always retightens to its original shape • very comfortable wear and skin tolerance due to high cotton content

Material • 85 % (CO) cotton, 15 % (EL) elastane • colour: white • machine washable up to 60 °C

Length in cm Type Item-No. 20, 25, 30, 35, 40, 45, 50, 55, 60 with hole for pin 25A20/.. 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 75 without hole 25A21/.. for pin

Ordering example: 25A20/20 = with hole for pin, length 20 cm

The sock stretches from approx. 8 cm up to 16 cm.

Dimension sketch: stretched width from... to...cm

desired folding rim

length of stump sock

www.streifeneder.com/op 173 Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Cotton Stump Sock for BK-amputees thin, smooth quality, straight shape, with elastane content

Designated use • item-no. 25A23 with vulcanised rubber opening for pin, to be worn over any liner • item-no. 25A24 without opening for pin, may be worn directly on the skin • effective to even out differing volume • light compression effect, due to elastane content

Characteristics • extremely stretchable and dimensional stability by high elastane content, i.e. the material always retightens to its original shape • very comfortable wear and skin tolerance due to high cotton content • flat, single layer cuff

Material • 95 % (CO) cotton, 5 % (EL) elastane • colour: off-white • machine washable up to 60 °C

Length in cm Type Item-No. 20, 25, 30, 35, 40, 45, 50, 55 with hole for pin 25A23/.. 20, 25, 30, 35, 40, 45, 50, 55, 60 without hole for pin 25A24/..

Ordering example: 25A23/20 = with hole for pin, length 20 cm

The sock stretches from approx. 8 cm up to 16 cm.

Dimension sketch: stretched width from... to...cm

desired folding rim

length of stump sock

174 www.streifeneder.com/op Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Nylon Stump Sock for BK-amputees very ﬁne-knit, thin quality, straight shape

Designated use • to be worn over the liner to effectively protect the liner

Characteristics • item-no. 25A30 features twisted, double material layer, which itself forms a pin opening • item-no. 25A31 with vulcanised rubber opening for pin • the whipped seam of the cuff marks the inside; the smooth side of the knitted fabric must face outwards

Material • 100 % PA (nylon), knitted fabric, similar to opaque tights • colour: white • machine washable up to 60 °C

Length in cm Type Item-No. 25, 30, 35, 40, 45, 50, 55 with hole for pin 25A30/.. 20, 25, 30, 35, 40, 45, 50, 55 with rubber vulcanised pin hole 25A31/..

Ordering example: 25A30/25 = with twisted, double material layer forming a pin opening, length 25 cm

The sock stretches from approx. 11 cm up to 20 cm.

Dimension sketch: stretched width from... to...cm

desired folding rim

length of stump sock

www.streifeneder.com/op 175 Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Nylon Stump Sock for BK-amputees thin, ﬁne-knit quality, straight shape, large pin opening

Designated use • to be worn over the liner to effectively protect the liner

Characteristics • the pin opening, diam. approx. 4 cm, is formed by a knitted cuff (e.g. suitable for a KISS® Lanyard system) • the whipped seam of the cuff marks the inside; the smooth side of the knitted fabric must face outwards

Material • 100 % PA (nylon), open knitted fabric, similar to opaque tights • colour: white • machine washable up to 60 °C

Length in cm Type Item-No. 25, 35, 45 with knitted hole for pin 20A61/..

Ordering example: 20A61/25 = length 25 cm

If a cuff is desired, its length must be added to the sock length. Size is determined by sock length only. For bigger circumferences of the residual limb, the sock length becomes shorter due to stretching.

The sock stretches from approx. 10 cm up to 20 cm.

Dimension sketch: stretched width from... to...cm

desired folding rim

length of stump sock

176 www.streifeneder.com/op Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Terrycloth Stump Sock for AK-amputees thick quality, conical form

Designated use • very effective to even out differing volume, due to voluminous inside with terry-cloth loops • item-no. 25A15 with vulcanised rubber opening for pin, to be worn over any liner • item-no. 25A16 without opening for pin, may be worn directly on the skin or over any sheath e.g. item-no. 25A50

Characteristics • conical shape, therefore with lateral flat cover seam • very comfortable wear due to high cotton content • the terry-cloth loops on the inside provide excellent cushioning effect and climate management, since this voluminous type may store abundant moisture • very stretchable and yet dimensionally stable knitting technique

Material • 85 % (CO) cotton, 15 % (PA) textured (crinkled) polyamide silk • colour: white • machine washable up to 60 °C

Length in cm Type Item-No. 20, 25, 30, 35, 40, 45, 50, with hole for pin 25A15/.. 55, 60 20, 25, 30, 35, 40, 45, 50, without hole for pin 25A16/.. 55, 60

Ordering example: 25A15/20 = with hole for pin, length 20 cm

Dimension sketch: The sock stretches from approx. 16 cm up to 27 cm. stretched width from... to...cm

desired folding rim

length of stump sock

www.streifeneder.com/op 177 Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Cotton Stump Sock for AK-amputees thin, smooth quality, conical shape, with elastane content

Designated use • with vulcanised rubber opening for pin for ak-amputees • to be worn over any liner and effective to even out differing volume

Characteristics • extremely stretchable and dimensional stability by elastane content, i.e. the material always retightens to its original shape • very comfortable wear and skin tolerance due to high cotton content • flat, single-layer cuff • conical shape, with flat lateral cover seam

Material • 95 % (CO) cotton, 5 % (EL) elastane • colour: off-white • machine washable up to 60 °C

Length in cm Type Item-No. 25, 30, 35, 40, 45, 50, 55 with hole for pin 25A25/..

Ordering example: 25A25/25 = length 25 cm

The sock stretches from approx. 14 cm up to 28 cm.

Dimension sketch: stretched width from... to...cm

desired folding rim

length of stump sock

178 www.streifeneder.com/op Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Nylon Stump Sock for AK-amputees very ﬁne-knit, thin quality, conical shape

Designated use • with vulcanised rubber opening for pin for ak-amputees • to be worn over the liner to effectively protect the liner

Characteristics • the whipped seam of the cuff marks the inside; the smooth side of the knitted fabric must face outwards • conical shape, therefore with lateral flat cover seam

Material • 100 % PA (nylon), knitted fabric, similar to opaque tights • colour: white • machine washable up to 60 °C

Length Type Item-No. 25, 30, 35, 40, 45, 50, 55 with hole for pin 25A35/..

Ordering example: 25A35/25 = length 25 cm

The sock stretches from approx. 19 cm up to 32 cm.

Dimension sketch: stretched width from... to...cm

desired folding rim

length of stump sock

www.streifeneder.com/op 179 Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Wool Stump Sock for AK- and BK-amputees strong quality, 3 threads, conical shape

Designated use • effective to even out differing volume • strong fabric (pink seam) • this type without opening for pin may be worn directly on the skin • between skin and stump sock a sheath, e.g. item-no. 25A50 must be worn

Characteristics • very comfortable wear and warming effect due to wool content • during wearing, the stocking shape adapts to the individual shape of the residual limb • provides excellent cushioning effect and climate management, since wool may absorb abundant moisture, without feeling damp

Material • 70 % (WO) wool, 30% (CV) rayon • colour: off-white • machine washable up to 30 °C

Wool stump sock with hole for pin available on request.

Length in cm Form in cm Item-No. 30, 35, 40, 45, 50, 55, 60, 65, 70, 75 20 x 10 unstretched, 20A74/.. 25 x 13 stretched

Ordering example: 20A74/30 = length 30 cm

If a cuff is desired, its length must be added to the length of the sock.

Dimension sketch:

ﬂattened width above

length of stump sock

ﬂattened width below 5 – 6 cm

180 www.streifeneder.com/op Socket Comfort – Stump Socks Socket Comfort – Stump Socks

Wool Stump Sock for AK- and BK-amputees medium strong quality, 2 threads, conical form

Designated use • effective to even out differing volume • medium strong fabric (white seam) • this type without opening for pin may be worn directly in the skin • between skin and stump sock a sheath, e.g. item-no. 25A50 must be worn

Characteristics • very comfortable wear and warming effect due to wool content • during wearing, the stocking shape adapts to the individual shape of the residual limb • provide excellent cushioning effect and climate management, since wool may absorb abundant moisture, without feeling damp

Material • 70 % (WO) wool, 30 % (CV) rayon • colour: off-white • machine washable up to 30 °C

Wool stumpsock with hole for pin available upon request.

Length in cm Form in cm Item-No. 25, 30, 35, 40, 45, 50 15 x 9 unstretched, 20A57/.. 19 x 12 stretched 25, 30, 35, 40, 45, 50, 55, 60, 65, 70 20 x 10 unstretched, 20A58/.. 25 x 13 stretched

Ordering example: 20A57/25 = length 25 cm, form 15 x 9 cm (unstretched) resp. 19 x 12 cm (stretched)

If a cuff is desired, its length must be added to the length of the sock.

Dimension sketch:

ﬂattened width above

length of stump sock

ﬂattened width below 5 – 6 cm

www.streifeneder.com/op 181

Locking Systems Locking Systems Locking Systems

In order to create a safe connection between liner and prosthesis, Streifeneder offers locking systems, which are optimally tailored to the users‘ needs. The large choice of locking systems enables the technician to create a socket connection that is adapted to the patients‘ requirements.

Every Streifeneder lock system unlocks under tensile load, which enables the patient to easily unlock the prosthesis even under tension, e. g. in a sitting position. A lockable mechanism is offered as an accessory for our clutch locks, which makes it easier for geriatric patients in particular to take off the prosthesis. The Locking Systems differ on the one hand by the type of locking and on the other hand by the design of the housing.

Various types of locking systems provide the technician with the necessary freedom to design an individual prosthetic alignment. Each Streifeneder locking system can be combined with any type of liner.

Streifeneder locking units stand out due to a high service life and a flexible scope of functions. A well-thought housing design offers a maximum amount of flexibility with regard to the alignment possibilities of a prosthesis. The locking systems are delivered with all necessary dummies and laminating aids. Detailed and illustrated operating instructions simplify the alignment of the prosthesis. For every use, Streifeneder offers a matching system. Three Different Pin Systems

Serie S1 – Clutch Lock Serie S2 – Shuttle Lock Serie S3 – Easy Lock

The Streifeneder lock series S1 is a con- The Streifeneder lock series S2 is locked The Streifeneder lock series S3 is a tinuous pin fastening system with worm under pressure with an indented pin. continuous pin fastening system with thread. This prevents any movement and The shuttle pin generates an audible a smooth pin. The Easy-Pin is silently generates a user-friendly connection. clicking noise when engaging and locked under pressure. This gives The pin pulls downwards and the patient thereby gives the user the security to the user a safe locking for the entire additionally also has the possibility to be safely connected to the prosthesis. length of the pin. draw himself manually downwards and This is a benefit especially for geriatric The high-quality material of the pin therefore does not have to carry out the users. ensures a very long lifespan even connection under pressure. The simple design of the system en- under extreme stress. The locking mechanism developed by sures an easy and rapid maintenance. The fine structuring of the pin at the Streifeneder always ensures a simple Due to the design of the pin, it is easy same time allows for a stepless and unlocking of the locking system – even to put on the prosthesis without safe locking. under severe tensile stress by the pros- getting jammed. thesis. The precision retaining bearing ensures a long lifetime even for highly active patients. Assembly Height of the Locking Systems

Series 100

The lock series 100 is made of synthetic material, which makes it light as a screw thread feather and very small. It is suitable for users of any weight category. The alig-

installation height 23 mm nment can easily be corrected in connection with a socket adapter if it deviates distal connection surface from the plumb line.

Series 150

screw thread The lock series 150 is characterized by its small construction and its high- strength aluminum housing. The alignment can easily be corrected in connection installation height 23 mm with a socket adapter if it deviates from the plumb line. distal connection surface

Series 200

screw thread The lock series 200 is made of aluminum and stands out due to its light and ﬂat design. Distally, various socket adapters can be used. installation height 30 mm distal connection surface

Series 300

screw thread The lock series 300 is made of weight-optimized synthetic material. It is suitable for both laminated and thermoplastic sockets and can entirely be replaced by means of installation height 30 mm working with deep-drawing dummy. Various mold inserted discs and socket adap- tors can be installed at the distal end. Series 400

screw thread The lock series 400 is made of aluminum and is ﬁxed by means of a three-prong socket adaptor. Special advantages of this lock series is the pyramid adapter, installation height which is already integrated into the lock and the rotational adjustment 33 mm distal connection surface possibility.

Series 500

screw thread The lock series 500 is made of aluminum and has a distal pyramid adapter. It is especially suited for a rapid and easy manufacture of laminated or thermo- installation height plastic prosthetic sockets for stumps without distinct contractures and plumb 37 mm distal connection surface line deviations.

Series 600

The lock series 600 is made of synthetic material. It is lightweight and equipped screw thread with an integrated four-hole connector and has a low assembly height. It is installation height 17 mm particularly recommended for trans-femoral supplies and long stumps of the distal connection surface lower leg. VST Modular System

What does the patient expect from a prosthesis? This is clearly deﬁ ned in modern orthopaedics. The artiﬁ cial limb must be functional and safe and must offer maximum quality. However, the economic aspects will play an even more important role in the future. Therefore, it is our task to implement the increased requirements in an appropriate manner. The result is a special vacuum system – the possibility to switch between the pin system and the vacuum system.

10S1 10S2 10S3 15S1 15S2 15S3 All components are exclusively made of high-quality and corrosion-resistant materials. To switch from the pin system to the vacuum system you need a maximum of ﬁ ve components (depending on the series). Thus, up to 12 different locking systems (with pin) can be converted. Depending on the condition of the stump, you can always switch between the systems especially during the interim phase. Long-term tests have shown that the vacuum technology has a positive impact on the gait pattern of the patient because rotation and pistoning – as a rule – will not occur or only to a small extent.

30S1 30S2 30S3 50S1 50S2 50S3 Locking Systems Locking Systems

Cord Locking System -Modular-

• installation height: 26 mm • very light construction • suitable for thermoplastic sockets • easy to put on • very suitable for geriatric and insecure patients • with plastic cover for external socket ﬁxation • with latching clamp • weight: 24 g

Install. height of disc Item-No. 26 mm 8S1

Protective Covering

• for lanyard lock 8S1

Item-No. 8S1/E4

Cord Locking System -Lamination-

• installation height: 18 mm • very light construction • easy to put on • very suitable for geriatric and insecure patients • with lamination dummy made of silicone for direct lamination of the cord channel into the socket • with latching clamp • weight: 30 g

Install. height of disc Item-No. 18 mm 9S1

Lamination Disc for Cord Locking System

• lamination disc, 18 mm for cord locking system 9S1

Install. height Item-No. 18 mm 9S1/E1

www.streifeneder.com/op 191 Locking Systems Locking Systems

Lanyard with Liner Connection Screw

• for lanyard lock 8S1 and 9S1 • easy pulling into the socket

Item-No. 8S1/E2

Latching Clamp

• for lanyard lock 8S1 and 9S1

Item-No. 8S1/E3

Lanyard

• for lanyard lock 8S1 and 9S1

PU = 5 m

Item-No. 8S1/E200

Winding Button Set

• for lanyard lock 8S1 and 9S1 • complete winding button • one-handed ﬁxation of laces

PU = 1 set

Item-No. 8S1/E5

192 www.streifeneder.com/op Locking Systems Locking Systems

Lock Series 100

• no body weight restriction because the lock is not a weight bearing component • activity level (walky): 1 to 4 for 10S1 and 10S2 • activity level (walky): 1 to 3 for 10S3 • effective height: approx. 23 mm • suitable for laminated sockets • plastic housing is temperature resistant up to 200 °C

The locks of the series 100 distinguish themselves by a very small construction and a shock-resistant plastic housing. Inserted into an AK or BK socket with common lamination techniques, they serve as liner locks. In connection with a socket attachment block 12A7 you can easily correct the deviation of the socket gradient and the plumb line.

• very small construction • very light • rotation secured pin guide made of stainless steel • locking unit is completely exchangeable • with lamination dummy 10S1/E6L (for 10S1), 10S1/E6 (for 10S2 and 10S3) • including sealing grease 22A100 • please order press button extensions for geriatric patients or big sockets separately • the individual casing varieties can also be ordered separately with the following item numbers: 10S1/E1 for 10S1, 10S2/E1 for 10S2, 10S3/E1 for 10S3

All necessary lamination adapters for the locking unit are included in the delivery!

Lock type With pin Weight Item-No. Clutch-Lock 101 geared 58 g 10S1 Shuttle-Lock 102 rastered 56 g 10S2 Easy-Lock 103 plain 60 g 10S3

www.streifeneder.com/op 193 Locking Systems Locking Systems

Lamination Dummy for Series 100

• replacement part • helps during adjustments on the plaster positive

Application Item-No. Shuttle- and Easy-Lock 10S1/E6 Clutch-Lock (left-handed thread) 10S1/E6L

194 www.streifeneder.com/op Locking Systems Locking Systems

Lock Series 150

• no body weight restriction because the lock is not a weight bearing component • activity level (walky): 1 to 4 at 15S1 and 15S2 • activity level (walky): 1 to 3 at 15S3 • effective height: approx. 23 mm • suitable for thermoplastic and laminated sockets • aluminum housing

The locks of the series 150 distinguishes itself by a very small construction and a high-strength aluminum housing. The aluminum housing can be taken out of the thermoplastic socket and can be utilised for the laminated socket. Processing follows according to common thermoplastic resp. lamination techniques. In connection with a socket attachment block 12A3, 12A5 or 12A7 you can easily correct the deviation of the socket gradient and the plumb line.

• very small construction • rotation secured pin guide made of stainless steel • locking unit is completely exchangeable • with lamination dummy 10S1/E6L (for 15S1), 10S1/E6 (for 15S2 and 15S3) • including sealing grease 22A100 • please order press button extensions for geriatric patients or big sockets separately

Lock With pin Weight Item-No. Clutch-Lock 151 geared 95 g 15S1 Shuttle-Lock 152 rastered 90 g 15S2 Easy-Lock 153 plain 85 g 15S3

www.streifeneder.com/op 195 Locking Systems Locking Systems

Vacuum-Clutch-Lock

• there is no load restriction because the lock is not a weight-bearing component • effective height approx. 23 mm • extremely good adhesion of the residual limb in the prosthesis • precisely adjustable vacuum by simple use of the press button • valve unit 10S4/L completely exchangeable • with lamination dummy 10S1/E6L • quickly convertible into pin system

Material Weight Item-No.

Aluminum 70 g 15S4

Lamination Dummy for Series 100

• replacement part • helps during adjustments on the plaster positive

Application Item-No. Clutch-Lock (left-handed thread) 10S1/E6L Shuttle- and Easy-Lock 10S1/E6

196 www.streifeneder.com/op Locking Systems Locking Systems

Lock Series 200 max. 125 kg • max. patient weight: 125 kg max. • activity level (walky): 1 to 4 at 20S1 and 20S2 125 kg • activity level (walky): 1 to 3 at 20S3 • effective height approx. 30 mm • suitable for thermoplastic and laminated sockets • aluminum housing

For the modular construction of prostheses, the ﬂat locking systems of the series 200 offer a variety of combination possibilities.

• light, ﬂat construction • rotation secured lamination disc • continuous guide bushing made of stainless steel • distally with channel for planar connection of all socket adapters with 4-hole connection • easy cleaning and replacing of complete locking unit is possible without dismantling the prosthesis • including lamination disc with dummy 20S1/E5 • please order press button extensions for geriatric patients or big sockets separately

All necessary lamination adapters for the locking unit are included in the delivery!

Lock type With pin Weight Item-No. Clutch-Lock 201 geared 188 g 20S1 Shuttle-Lock 202 rastered 172 g 20S2 Easy-Lock 203 plain 178 g 20S3

www.streifeneder.com/op 197 Locking Systems Locking Systems

Lamination Disc for Series 200

• replacement part for 20S1, 20S2 and 20S3 • with lamination dummy 20S1/E51 • and 4 hexagonal socket head bolts 22A2/M6x8

Diameter Item-No. 64 mm 20S1/E5

Dummy for Lamination Disc Series 200

• replacement part for 20S1/E5 • consists of taper and bolt

Item-No. 20S1/E51

Countersink Bolt

• replacement part • M6 x 40 mm • for direct load transmission from lamination disc to different adapters

Length Item-No. 40 mm 22A5/M6x40

Deep-Drawing Adapter Ring

• accessory • necessary for the production of thermoplastic sockets • proximal connection to the lamination disc 20S1/E5 of this ring improves the pin guidance in the socket

Material Item-No. Plastic 20S1/E53

198 www.streifeneder.com/op Locking Systems Locking Systems

Lock Series 300 max. 100 kg • max. patient weight: 100 kg max. • activity level (walky): 1 to 4 at 30S1 and 30S2 100 kg • activity level (walky): 1 to 3 at 30S3 • effective height: approx. 30 mm • 33 mm with hopper • suitable for thermoplastic and laminated sockets • plastic housing is temperature resistant up to 200 °C

The new weight-optimised lock series 300 made of wear-resistant plastic is very suitable for direct lamination or for complete exchange, if you utilise a lamination dummy 30S1/D56 - 30S1/D76. You can attach different lamination discs and socket adapters with 6 screws in the distal end of the socket.

• including of hopper Ø 66 mm • including of sealing grease 22A100 • very light construction made of plastic • multifunctionally applicable • continuous guide bushing, rotation secured, made of stainless steel • completely exchangeable locking unit • for direct lamination in connection with: lamination disc, round -aluminum- 16A3 / lamination disc, angular -aluminum- 16A5 / socket adapter with adjustment core and lamination anchor -titanium- 16A10 or 16A30 (please order separately) • suitable for lamination dummy 30S1/D56, D66 and D76 • easy cleaning and replacing of complete locking unit is possible without dismantling the prostheses • with lamination dummy 30S1/E6L (for 30S1), 30S1/E6 (for 30S2 and 30S3) • please order press button extensions geriatric patients or big sockets separately • the individual casing varieties can also be ordered separately with the following article numbers: 30S1/E1 for 30S1, 30S2/E1 for 30S2, 30S3/E1 for 30S3

All necessary lamination adapters for the locking unit are included in the delivery!

Lock type With pin Weight Item-No. Clutch-Lock 301 geared 77 g 30S1 Shuttle-Lock 302 rastered 82 g 30S2 Easy-Lock 303 plain 80 g 30S3

www.streifeneder.com/op 199 Locking Systems Locking Systems

Lamination Disc, round or square -Aluminum-

• accessory • with lamination dummy 22A13 for sealing • rotation secured • for direct lamination please use countersink screws 22A6/M6x14 • with 4 countersink screws 22A5/M6x14 (zinc-plated) for attaching of socket adapters • and 6 mounting screws 22A4/29x95 for attachment to the lock series 300

Material Shape / Eff. height max.2kg Item-No. weight Aluminum Ø 64 mm / 9 mm 150 kg 16A3 45 g Aluminum [ ] 52 mm / 9 mm 150 kg 16A5 32 g

Lamination Dummy

• replacement part • for lamination disc 16A3 and 16A5 • for optimal sealing of the holes and threads without plasticine • simple and safe handling

Item-No. 22A13

Mini Lamination Disc -Titanium-

• accessory • with adjustment core • rotation secured, for direct lamination • with 6 mounting screws 22A4/29x95 for attachment to the lock series 300

Material Shape / Eff. height max.2kg Item-No. weight Titanium Ø 47 mm / 6 mm 75 kg 16A10 48 g

200 www.streifeneder.com/op Locking Systems Locking Systems

Lamination Anchor -Titanium-

• accessory • with adjustment core • with 6 mounting screws 22A4/29x95 for attachment to the lock series 300

Material Shape / Eff. height max.2kg Item-No. weight Titanium 4-prong / 6 mm 100 kg 16A30 52 g

Hopper

• accessory • suitable for all locks of the lock series 300 • for attaching and clamping

For lock Diameter Item-No. 30S2, 30S3 56 mm 30S1/E56 30S1, 30S2, 30S3 66 mm 30S1/E66 30S1, 30S2, 30S3 76 mm 30S1/E76

Lamination Dummy

• accessory • for all locks of the lock series 300 with hopper • available in plastic or aluminum • with retainer • for transfer of the lock unit into the socket we recommend our lock unit milling cutter 150P1 with Ø 22 mm

For lock Ø / material Item-No. 30S2, 30S3 56 mm / POM 30S1/D56 30S2, 30S3 56 mm / Aluminum 30S1/AD56 30S1, 30S2, 30S3 66 mm / POM 30S1/D66 30S1, 30S2, 30S3 66 mm / Aluminum 30S1/AD66 30S1, 30S2, 30S3 76 mm / POM 30S1/D76 30S1, 30S2, 30S3 76 mm / Aluminum 30S1/AD76

www.streifeneder.com/op 201 Locking Systems Locking Systems

Lamination Dummy for Lock Series 300

• replacement part • helps during adjustments on the plaster positive • seals up the lock unit

Application Item-No. Clutch-Lock (left-handed thread) 30S1/E6L Shuttle- and Easy-Lock 30S1/E6

202 www.streifeneder.com/op Locking Systems Locking Systems

Lock Series 400 max. 125 kg • max. patient weight: 125 kg max. • activity level (walky): 1 to 4 at 40S1 and 40S2 125 kg • activity level (walky): 1 to 3 at 40S3 • effective height: approx. 33 mm • suitable for thermoplastic and laminated sockets • aluminum housing

With the big lamination anchor, the series 400 is specially applicable for BK and AK sockets with very big distal circumferences. The housing, made of a high quality aluminum alloy, is distally ﬁtted with an adjustment core for a compact construction.

• with lamination anchor 10A21/S (110 g) for direct lamination into the socket • with distal adjustment core • easy cleaning and exchange of complete lock unit • with lamination dummy 22A9 • including of sealing grease 22A100 • please order press button extensions for geriatric patients or big sockets separately

All necessary lamination adapters for the locking unit are included in the delivery.

Lock type With pin Weight Item-No. Clutch-Lock 401 geared 158 g 40S1 Shuttle-Lock 402 rastered 147 g 40S2 Easy-Lock 403 plain 136 g 40S3

www.streifeneder.com/op 203 Locking Systems Locking Systems

Socket Adapter -Stainless Steel-

• accessory • for lock series 400 • with M36 inner thread • for combination with rotatable adapters titanium or stainless steel • for direct lamination into trans-femoral sockets • continuous rotation adjustment possible • including socket cap screw 22A2/M5x30

Material Weight Eff. height max.2kg Item-No. Stainl. Steel 92 g 8 mm 125 kg 10A21/S

Please order 22A9 separately!

Lamination Dummy for Lock Series 400

• accessory • for positioning of the socket adapter onto the plaster positive

Item-No. 22A9

204 www.streifeneder.com/op Locking Systems Locking Systems

Lock Series 500 max. 125 kg • max. patient weight: 125 kg max. • activity level (walky): 1 to 4 for 50S1 and 50S2 125 kg • activity level (walky): 1 to 3 for 50S3 • effective height: approx. 37 mm • suitable for thermoplastic and laminated sockets • aluminum housing

The advantage of the lock series 500 is the time-saving manufacturing of thermoplastic sockets. Through the simple construction the housing will be completely enclosed by the socket material. The integrated cutting protection allows a fast and safe uncovering of the adjustment core.

• housing with pull-in channel • continuous guide bushing made of stainless steel • easy cleaning and exchange of complete lock unit without dismantling the prostheses • including of lamination dummy 50S1/E5L (for 50S1), 50S1/E5 (for 50S2 and 50S3) • including of sealing grease 22A100 • please order press button extensions for geriatric patients or big sockets separately

All necessary lamination adapters for the locking unit are included in the delivery.

Lock type With pin Weight Item-No. Clutch-Lock 501 geared 170 g 50S1 Shuttle-Lock 502 rastered 162 g 50S2 Easy-Lock 503 plain 160 g 50S3

Lamination Dummy for Lock Series 500

• accessory • for deep-drawing or lamination

Application Item-No. Clutch-Lock (left-handed thread) 50S1/E5L Shuttle-Lock and Easy-Lock 50S1/E5

www.streifeneder.com/op 205 Locking Systems Locking Systems

Lock Series 600 max. 136 kg • max. patient weight: 136 kg • activity level (walky): 1 to 3 • effective height: approx. 17 mm • suitable for thermoplastic and laminated sockets as well as for exoskeletal construction • advantageous for CAD socket technique • plastic housing is temperature resistant up to 200 °C

The lock series 600 distinguishes itself by an extremely low installation height with integrated 4-hole connection. Thus even long BK- and AK-stumps can be ﬁtted. With the reusable lamination dummy you may manufacture thermoplastic as well as laminated sockets. For an exoskeletal construction a lamination disc allows an attachment of the lock in the inside of the socket. With the CAD socket technique it is possible to mould the place holder for the lock on the stump positive already on the computer. This saves costs and time for an optimal pin progression.

• very ﬂat construction • integrated 4-hole connection • highly resistant plastic housing • simple installation and dismantling • with lamination disc 16A40 suitable for exoskeletal construction • mountable without spacer through socket adapter 10A90/T • ideal for CAD socket technique • simple and time-saving manufacturing of thermoplastic sockets with one lamination dummy • demountable housing for cleaning purposes

Lock type With pin Weight Item-No. Shuttle-Lock rastered 78 g 60S2

Lamination Dummy

• accessory • for 600 series lock • suitable for thermoplastic and laminated sockets • reusable

Material Diameter Item-No. Aluminum 65 mm 60S2/D

Lamination Disc

• accessory • for 600 series lock

Material Weight max.2kg Item-No. Plastic 45 g 136 kg 16A40

206 www.streifeneder.com/op Locking Systems Locking Systems

Service Parts Kit for Shuttle Lock 60S2

• incl. press button extension • POM disc for extended pin guidance

Item-No. 60S2/E

Spare Pin for Shuttle Lock 60S2

Length Item-No. 270 mm 60S2/E270 650 mm 60S2/E650

Vacuum Lock 30S4

• effective height: 25 mm • offers a high level of safety and comfort • special mufﬂer reduces noise • suitable for deep drawing and lamination sockets • heat resistant plastic up to 200 °C • no elongation in the socket • exactly adjustable regulation of the valve • incl. lamination dummy 30S4/E6 (separately available) and o-ring set 30S4/ E9 (separately available as spare part set)

Weight max.2kg Item-No. 75 g 150 kg 30S4

Dummy for Vacuum-Lock 30S4

This dummy is especially made for the production of check sockets with Vacuum-Lock-System. It allows for the application of all liner sizes and kinds of liners. The dummy is reusable.

• sealing ring included • with fastener • and spare sealing ring

Material Diameter Item-No. Aluminum 50 mm 30S4/AD50

www.streifeneder.com/op 207 Locking Systems Locking Systems

Vacuum-Valve

• for lock series 100, 150, 300 and 500 • low maintenance valve due to filter screen • vacuum can be regulated precisely • compatible to nearly all streifeneder pin lock-systems • quick and easy installation and retrofitting without any special tools • special muffler for noise reduction

Thread Item-No. left-handed 10S4/L right-handed 10S4/R

Sealing Disc

• for sealing kit, to seal the lock series 300

Material Weight Item-No. Silicone 10 g 30S4/D

Sealing Plunger, Series 500

• for sealing kit, to seal the lock series 500 • o-ring set 30S4/E8 available as spare part set (PU = 10 pcs.)

Material Weight Item-No. POM black 30 g 50S4/P

Sealing Plunger, Series 300

• for sealing kit, to seal the lock series 300 in combination with 16A10 and 16A30 • o-ring set 30S4/E8 available as spare part set (PU = 10 pcs.)

Material Weight Item-No. POM black 24 g 30S4/P

Silencer

• for vacuum valve 10S4/L and 10S4/R

PU Item-No. 1 pc. 10S4/E6

208 www.streifeneder.com/op Locking Systems Locking Systems

O-Ring

• for vacuum valve 10S4/L and 10S4/R • separately available or as set

PU Item-No. 1 pc. 10S4/E7 5 pcs. 30S4/E7

Replacement Lock Unit

• for locking systems • complete • for simple exchange

Application For pin Item-No. Clutch-Lock geared 10S1/E2 Shuttle-Lock rastered 10S2/E2 Easy-Lock plain 10S3/E2

Replacement Push Button

• accessory • gold anodized • suitable for all clutch-lock locking systems

Application Material Item-No. Clutch-Lock Aluminum 10S1/E21

Clutch Lock Block Unit, lockable

• through pressing and smooth distortion of the press button the lock unit is permanently blocked • thus the patient can use both hands for taking off the prostheses • the re-engineered lock mechanism allows an easy deblocking of the pin under load • suitable for all clutch lock housings • replace present lock unit with the blockable one

Application For pin Item-No. Clutch-Lock geared 10S1/E2V

www.streifeneder.com/op 209 Locking Systems Locking Systems

Integrated Patient Key

• for clutch lock • directly drawing in through the ring is possible

Item-No. 10S1/40

Push Button Extension

• suitable for all lock types • for geriatric patients or big socket diameters • big button with ﬁnger dent • easy reduction, ﬁnger dent remains in place

Material Length Diameter Item-No. Plastic 45 mm 21 mm 10S1/45

Push Button Extension

• suitable for all lock types • for geriatric patients or big socket diameters • pre-grooved button extension eases cutting • turn button helps to pull the PIN-Liner into the socket

Material Length Diameter Item-No. Aluminum 70 mm 16 mm 10S1/70

Push Button Extension extra long

• ﬁts all locking units • extra long extension

Material Length Diameter Item-No. Aluminum 85 mm 16 mm 10S1/85

Push Button Extension with slot

• suitable for all lock types • pre-grooved button extension eases cutting

Material Length Diameter Item-No. Aluminum 50 mm 13 mm 10S1/50

210 www.streifeneder.com/op Locking Systems Locking Systems

Patient Key

• accessory • for readjustment of a clutch-lock-locking unit • for installation of the liner pin • suitable for all lamination dummies of the lock

Material Item-No. Stainl. Steel 10S1/E4

Socket Head Spanner

• accessory • for exchange of the lock mechanisms of the lock systems • with span 16 mm • with handle

Length Span Item-No. 200 mm 16 mm 173P15/16

Replacement Lock Washer

• for all easy-lock systems • including spring • for exchange inside the lock body

Item-No. 10S3/E

Service-Set for Easy Locks 10S3, 15S3, 30S3, 50S3

• for easy-locks • components: guide bushing, closing lit

Item-No. 10S3/E30

Mounting Key

• accessory • for the exchange of the easy-lock lock washer

Item-No. 10S300

www.streifeneder.com/op 211 Locking Systems Locking Systems

Easy-Lock Pin -with Drill Hole-

• usable especially for lock system 10S3 and 15S3 • for direct screw into the distal connection of the liner • drawstring as a pulling in aid for more voluminous residual limbs • cord (8S1/E200) not included in scope of delivery

Length Item-No. 50 mm 10S3/E450

Replacement Pin

• accessory • for lock systems • for direct screwing into the liners‘ distal connection • comes in various lengths

Length For Pin type Item-No. 35 mm Clutch-Lock geared pin 10S1/E335 50 mm Clutch-Lock geared pin 10S1/E350 65 mm Clutch-Lock geared pin 10S1/E365 85 mm Clutch-Lock geard pin long 10S1/E385 35 mm Shuttle-Lock rastered pin 10S2/E335 50 mm Shuttle-Lock rastered pin 10S2/E350 65 mm Shuttle-Lock rastered pin 10S2/E365 35 mm Easy-Lock plain pin 10S3/E335 50 mm Easy-Lock plain pin 10S3/E350 65 mm Easy-Lock plain pin 10S3/E365

Pin Cover

Item-No. 22A11

Lock Unit Milling Cutter

• accessory • for milling of the push button if you utilise a lamination dummy of the series 300

Diameter Item-No. 22 mm 150P1

212 www.streifeneder.com/op Locking Systems Locking Systems

High Performance Maintenance Spray

• accessory • recommendable for all lock systems • full-synthetic lubricant, no bonding or resinating of surfaces • abrasion reducing • cleaning • protective against corrosion • suppresses dampness

Volume Item-No. 500 ml 117P22

Sealing Grease (Stickwax)

Material • stickwax • colour: yellowish

Application • for tight sealing during the lamination process of locking systems

Characteristics • sticky • highly temperature resistant

PU = 1 tin

Content Item-No. 5 ml 22A100

www.streifeneder.com/op 213

Accessories Accessories Accessories

To provide the most natural look of leg prostheses, various types of foam coverings are available. Some of our foam coverings have been pre-moulded in circumference and knee height. Our foam coverings are available and suitable for all of our Knee Joints. They are equipped with drill holes of 30 and 34 mm. We offer different slipover knee-highs to finish a well-adapted cosmetic leg and to achieve a look as natural as possible. In case of prosthetic feet which require foot adapters, it is very important that the screw shows a particularly high strength. Furthermore, the correct torque has to be observed and the screw connection has to be secured with Loctite if necessary. We offer several types of screws, which match thread and insert well. The torque wrench is an important tool to reach the required torques, which are an elemental part of quality assurance during the final assembly of a prostheses. Please remember to verify its exactness by regular calibra- tions, which should be carried out in fixed intervals if possible. We would be pleased to carry out this service for you. A prosthetic construction also includes valves, which ensure a safe and optimum connection between socket and stump. We offer you various designs within the range of flat and screw valves. Screw valves are integrated into special plastic sockets, which are made of different materials depending on the requirement. Screw valves can be used in a transparent „PET-Check-sockets“ as well as in flexible inner sockets for above-knee prosthesis. They allow the patient to handle the valves in a simple and safe way by means of a valve body that can be screwed in via a flappable handle. Accessories Accessories

Tube Carrier for Clamping Table

• safe clamping of prostheses components with tube clamping into the clamping table • hard-wearing tool made of nickel plated steel • suitable for all clamping tables

Tube ø Weight Item-No. 30 mm 930 g 76M11/30 34 mm 870 g 76M11/34

Replacement Tube for Tube Carrier 76M11

• replacement tube for tube carrier 76M11

Material Diameter Item-No. Steel 30 mm 76M11/30E2 Steel 34 mm 76M11/34E2

Adjustment Core Clamping Jaws

• safe clamping of prostheses components with pyramid adapter into the clamping table • magnets facilitate the use of the clamping jaws • hard-wearing tool made of nickel plated steel • suitable for all clamping tables

Weight Item-No. 820 g 76M10

In case of socket adapters that have been laminated in (e .g. 10A1/S) the rotational adjustment with the pyramid adapter may be sluggish. This can be remedied by using the pyramid adapter clamping jaws. Fixate the pyramid adapter in the clamping table using the clamping jaws and turn the socket.

Magnetic Felt Jaws

• with magnetic adhesive strip

PU = 1 pair

Width Item-No. 125 mm 165P23

www.streifeneder.com/op 219 Accessories Accessories

Derma-Flex Cosmetic Skin

Foot size Item-No. 22 - 27 cm 3P42/S 25 - 33 cm 3P42/L

For glueing the Derma-Flex Cosmetic Skin to the upper edge of the laminated socket, use our super glue / atomic glue ﬂexible, item- no. 118P31.

Cosmetic Soft Foam Cover

• made of PUR soft foam • for modular trans-tibial and knee-disarticulation prostheses • not pre-shaped • colour: peach • with Ø 30 mm bore • for left- and right-side application • please order the adequate nylon stockings 20A19 separately

Length Ø above Ø below Item-No. 50 cm 18,5 cm 16 cm 60A7

Cosmetic Soft Foam Cover

• made of PE-foam • for modular and trans-tibial prostheses • not pre-shaped • cuboid colour peach • with Ø 30 mm bore • for left- and right-side application • mouldable at 100 - 130 °C

Length Width Depth Item-No. 50 cm 16 cm 16 cm 60A8

220 www.streifeneder.com/op Accessories Accessories

Cosmetic Soft Foam Cover

• PE-foam harder than 60A8 • for modular BK-prostheses • not pre-shaped • cuboid colour peach • with Ø 34 mm bore • applicable for left and right side • mouldable at 100 - 130 °C

Length Width Depth Item-No. 50 cm 16 cm 16 cm 60A9

www.streifeneder.com/op 221 Accessories Accessories

Cosmetic Soft Foam Cover

• made of PUR soft foam • for modular trans-femoral and hip-disarticulation prostheses, for universal use • very distinctive pre-shaped calf • 30° knee flexion • colour: peach • with step bore (Ø 60 mm / Ø 32 mm) • choose between different knee heights and calf circumferences • the knee height signifies the distance, floor to knee center • please order the adequate nylon cosmetic stockings 20A17 separately • please order the adequate nylon connection 20A18 separately

Side Knee height Calf circ. Item-No. left 42 cm 36 cm 60A42/36L right 42 cm 36 cm 60A42/36R left 42 cm 40 cm 60A42/40L right 42 cm 40 cm 60A42/40R left 42 cm 44 cm 60A42/44L

right 42 cm 44 cm 60A42/44R left 47 cm 36 cm 60A47/36L right 47 cm 36 cm 60A47/36R left 47 cm 40 cm 60A47/40L right 47 cm 40 cm 60A47/40R left 47 cm 44 cm 60A47/44L right 47 cm 44 cm 60A47/44R left 52 cm 36 cm 60A52/36L right 52 cm 36 cm 60A52/36R left 52 cm 40 cm 60A52/40L right 52 cm 40 cm 60A52/40R left 52 cm 44 cm 60A52/44L right 52 cm 44 cm 60A52/44R

Cosmetic Soft Foam Cover

• same version like 60A47 • but with step-bore extra-long • especially for knee joint 3A15 and 3A49

Side Knee height Calf circ. Item-No. left 47 cm 36 cm 61A47/36L right 47 cm 36 cm 61A47/36R left 47 cm 40 cm 61A47/40L right 47 cm 40 cm 61A47/40R left 47 cm 44 cm 61A47/44L right 47 cm 44 cm 61A47/44R

222 www.streifeneder.com/op Accessories Accessories

Cosmetic Soft Foam Cover

• for modular trans-femoral prostheses, for universal use • 35° knee ﬂexion • colour: peach • identical to item 60A42, but with conical pre-drilling • cosmetic moulded ankle and knee area

Side Knee height Calf circ. Item-No. left 47 cm 36 cm 60A147/36L right 47 cm 36 cm 60A147/36R left 47 cm 40 cm 60A147/40L right 47 cm 40 cm 60A147/40R left 47 cm 44 cm 60A147/44L right 47 cm 44 cm 60A147/44R

Cosmetic Soft Foam Cover

• identical to item 60A147, but with step-bore extra-long • especially for knee joint KINEGEN.air-active 3A1800

Side Knee height Calf circ. Item-No. left 47 cm 36 cm 61A147/36L right 47 cm 36 cm 61A147/36R left 47 cm 40 cm 61A147/40L right 47 cm 40 cm 61A147/40R left 47 cm 44 cm 61A147/44L right 47 cm 44 cm 61A147/44R

www.streifeneder.com/op 223 Accessories Accessories

Cosmetic Soft Foam Cover

• for modular trans-femoral prosthesis • especially for knee joint KINEGEN.guard 3A850 and KINEGEN.basic 3A810 • 30° knee ﬂexion • with 3-step-bore ( Ø 80 mm / Ø 60 mm / Ø 32 mm)

Side Knee height Calf circ. Item-No. left 47 cm 40 cm 63A47/40L right 47 cm 40 cm 63A47/40R left 47 cm 44 cm 63A47/44L right 47 cm 44 cm 63A47/44L

Cosmetic Soft Foam Cover

• for modular trans-femoral prosthesis • especially for knee joint KINEGEN.stream 3A2000, 3A2100, 3A2200 • 30° knee ﬂexion • with step-bore extra-long (Ø 75 mm / Ø 32 mm)

Side Knee height Calf circ. Item-No. left 52 cm 40 cm 62A52/40L right 52 cm 40 cm 62A52/40R left 52 cm 44 cm 62A52/44L right 52 cm 44 cm 62A52/44R

224 www.streifeneder.com/op Accessories Accessories

Cosmetic Soft Foam Cover

• for femoral prosthesis • especially for knee joint KINEGEN.stream 3A2000, 3A2100, 3A2200 • 30° knee ﬂexion • with conical pre-bore and with step-bore extra-long (Ø 75 mm / Ø 32 mm)

Side Knee height Calf circ. Item-No. left 52 cm 40 cm 62A152/40L right 52 cm 40 cm 62A152/40R left 52 cm 44 cm 62A152/44L right 52 cm 44 cm 62A152/44R

AK Cosmetic Soft Foam Cover

• for large circumferences, for universal use • with 2-step-bore (Ø 60 mm / Ø 32 mm) • for left- and right-side application

Side Knee height Calf circ. Item-No. both sides 52 cm 52 cm 65A10

www.streifeneder.com/op 225 Accessories Accessories

Cosmetic Soft Foam Cover

• for modular trans-femoral prosthesis, universal application • with 2-step-bore (Ø 60 mm / Ø 32 mm)

Side Knee height Calf circ. Item-No. left 52 cm 44 cm 65A11/44L right 52 cm 44 cm 65A11/44R

Cosmetic Soft Foam Cover

• for modular trans-femoral prosthesis, universal application • with conical 3-step-bore (Ø 70 mm / Ø 50 mm / Ø 32 mm)

Side Calf circ. Item-No. left 40 cm 65A12/40L right 40 cm 65A12/40R left 44 cm 65A12/44L right 44 cm 65A12/44R

226 www.streifeneder.com/op Accessories Accessories

Cosmetic Soft Foam Cover

• for modular trans-femoral prosthesis, universal application • with 3-step-bore (Ø 60 mm / Ø 50 mm / Ø 32 mm)

Side Knee height Calf circ. Item-No. left 52 cm 40 cm 65A13/40L right 52 cm 40 cm 65A13/40R left 52 cm 44 cm 65A13/44L right 52 cm 44 cm 65A13/44R

Cosmetic Soft Foam Cover

• for modular trans-femoral prosthesis • with conical 3-step-bore (Ø 70 mm / Ø 60 mm / Ø 32 mm)

Side Knee height Calf circ. Item-No. left 52 cm 44 cm 65A14/44L right 52 cm 44 cm 65A14/44R

www.streifeneder.com/op 227 Accessories Accessories

Nylon Stockings

• for below knee (BK) prostheses • with knitted, elastic cuff • colour: peach • material: 100 % polyamid (nylon)

PU = 1 pair

Leg length Foot length Cuff circ. Item-No. 36 cm 20 cm 25 cm 20A19/1 41 cm 21 cm 25 cm 20A19/2 46 cm 21 cm 27 cm 20A19/3

Nylon Cosmetic Stockings

• for modular above knee (AK), knee-disarticulation (KD) and hip- disarticulation (HD) prostheses • colour: peach • with siliconised topband, stitched on the socking • material: 100 % polyamid (nylon)

PU = 1 pair

Leg length Foot length Cuff circ. Item-No. 59 cm 20 cm 36 cm 20A17/0 62 cm 20 cm 36 cm 20A17/1 66 cm 21 cm 38 cm 20A17/2 72 cm 21 cm 40 cm 20A17/3 84 cm 22 cm 40 cm 20A17/4

228 www.streifeneder.com/op Accessories Accessories

Nylon-Connection

• connects the cosmetic soft foam with the above knee (AK) socket • colour: peach • with siliconised topband, stitched on the socking • material: 100 % polyamid (nylon)

PU = 1 piece

Length Cuff width Item-No. 22 cm 34 cm 20A18/1 22 cm 35 cm 20A18/2 22 cm 36 cm 20A18/3

Rubber Cover for S.A.C.H. Foot

• for water proof walking aids (prostheses) • protective cover for bathing prostheses

Side Size Item-No. left universal 1P24/L right universal 1P24/R

For processing the rubber cover for the SACH-Foot in a swimming prosthesis (exo-skeletal construction), please use our super glue / atomic glue ﬂexible, item-no. 118P31.

www.streifeneder.com/op 229 Accessories Accessories

Exhaust Valve for BK Amputations Active.valve

• applicable for BK-amputations in PET-check-sockets and ﬁnal prostheses • secures the prosthesis in the socket by vacuum • produces vacuum during stance phase • pressure equalization by means of large push button • very light weight, low construction height and simple mounting with laminating dummy • fully assembled upon delivery • suitable for thermoplastic and laminated prosthesis sockets • only in connection with knee sleeve ContexGel.Knee Sleeve (30L1) • suitable only for silicone- or polymer-gel-liners without distal connection

Material Weight Item-No. Aluminum 5 g 6P50

Service Parts Kit for Exhaust Valve 6P50

Components • 1 lid • 1 wave spring • 1 flat seal Ø 14 mm, transparent, 40 shore A • 1 flat seal Ø 15 mm, transparent, 40 shore A • 1 flat seal Ø 15 mm, black, 80 shore A

Weight Item-No. 5 g 6P50/E13

Replacement Dummy Set for Exhaust Valve 6P50

Components • 1 dummy • 1 fixing screw

Weight Item-No. 1,5 g 6P50/E15

230 www.streifeneder.com/op Accessories Accessories

Screw Valve for Thermoforming Technique

• due to a specially designed thread a quick and easy fastening and loosening of the valve body is guaranteed • laterally ﬁxable lever via elastomer • easy to handle because of a large surface of the pushbutton • incl. lamination dummy • aluminum

Accessories (please order separately): • 2 two-hole keys 6P22 are needed for tightening the upper and lower screw ring

Material Item-No. Aluminum 6P20/T

The screw valve 6P20/T is to apply solely for ﬁttings of AK-sockets and only with vacuum forming techniques.

Screw Valve for Lamination Technique

Material Item-No. Aluminum 6P25/L

The screw valve 6P25/L is to apply solely for ﬁttings of AK-sockets and only with lamination techniques.

Valve Body for Screw Valves

• for items 6P20/T and 6P25/L

Material Item-No. Aluminum 6P20/TE2

Two Hole Key

• for Screw Valve 6P20/T

Item-No. 6P22

www.streifeneder.com/op 231 Accessories Accessories

Flat Rubber Valve -Automatic-

• with seat ring, automatic air outlet and thumb ﬂap, Ø 40 mm

Description Item-No. Flat rubber valve 6P36 Replacement valve core for 6P36 6P30

Flat Rubber Valve -Plastic Pin-

• with seat ring, tapered valve pin made of plastic and thumb ﬂap, Ø 40 mm

Description Item-No. Flat rubber valve 6P38 Replacement valve core for 6P38 6P32

Flat Rubber Valve -Stainless Steel Pin-

• with seat ring, tapered valve pin made of stainl. steel and thumb ﬂap • Ø 40 mm

Description Item-No. Flat rubber valve 6P27

Tube With Seat Ring

• for valves with outer Ø 40 mm

Inner ø x outer ø Item-No. 24 x 28 mm 28A1

Seat Ring

• for items 6P27, 6P34, 6P36 and 6P38

Diameter Item-No. 40 mm 6P29

Valve Body for Flat Rubber Valves

• for items 6P27, 6P36 and 6P38

Diameter Item-No. outer 35 mm / inner 25 mm 6P39

232 www.streifeneder.com/op Accessories Accessories

Rubber Valve with Seat Ring

• with thumb ﬂap

Diameter Item-No. 40 mm 6P34

Rubber Housing

• replacement for ﬂat rubber valve 6P36 and 6P38, with thumb ﬂap

Diameter Item-No. 40 mm 6P35

www.streifeneder.com/op 233 Accessories Accessories

Storing Bag for Prostheses made of PE (LD-PE)

• made of PE (LD-PE) • PU = 10 pieces

Length x Width Colour Item-No. 120 x 40 cm blue 164P25

Carrying Bag for Prostheses made of Cotton

• for AK-prostheses • wear-resistant • made of cotton • with adjustable shoulder belt • with inner pocket and handle belt • PU = 1 pc.

Length x Width Colour Item-No. 110 x 34 cm blue 164P11

Upon request, the bags are also available with your company logo. Minimum order quantity: 100 pcs..

Nylon-Carrying Bag for Prostheses

• for AK-prostheses • wear-resistant nylon • with adjustable shoulder belt • with handle belt • PU = 1 pc.

Length x Width Colour Item-No. 110 x 42 cm black 164P11/N

Upon request, the bags are also available with your company logo. Minimum order quantity: 100 pcs..

Nylon-Carrying Bag short for Prostheses

• for BK-prostheses • wear-resistant nylon • with adjustable shoulder belt • with handle belt • PU = 1 pc.

Length x Width Colour Item-No. 75 x 38 cm black 164P11/K

Upon request, the bags are also available with your company logo. Minimum order quantity: 100 pcs..

234 www.streifeneder.com/op Accessories Accessories

M.A.S. Tool Kit

• for simple measuring of the muscular and bony structure for manufacturing of anatomical AK (above knee)-sockets

in aluminum case, contains: • 163P31 Tuber-M-L-Gauge • 163P32/S Diagometer • 163P33 Ramus Angle Gauge • 163P34 Plurimeter-V • 163P35 M.A.S. Compressive Measuring Tape • 163P36 Digital Camera

Item-No. 163P30

M.A.S.-Tool Kit

• like item 163P30 but without digital camera

Item-No. 163P29

Tuber-M-L-Gauge

• scale in two measurement ranges • measurement range 1: determination of distances in BK and AK areas (A-P and M-L) • measurement range 2: determination of stump lengths

Item-No. 163P31

Diagometer

• concave and ﬂat contact face • diagonal measuring • measurement range 70-125 mm

Item-No. 163P32

www.streifeneder.com/op 235 Accessories Accessories

Ramus Angle Gauge

• measurement range +/- 60° • for measuring the ramus angle • for measuring extension and ﬂexion as well as ab- and adduction in BK and AK ranges

Item-No. 163P33

Plurimeter-V

• automatic raster for each quarter rotation • easy ﬁnding of the 0-preliminary setting

Item-No. 163P34

M.A.S. Compressive Measuring Tape

• tension control via springs • adjustable tension on 2 kg and 4 kg • this allows a uniform reproducible way of measuring

Item-No. 163P35

Digital Camera

• brand name camera (depending on offer)

Item-No. 163P36

Picture similar

236 www.streifeneder.com/op Accessories Accessories

Above-Knee Socket

• uncopied, poplar wood • circum. = stump circumference

Size Circum. Depth x width x Item-No. height 1 35 - 49 cm 215 x 190 x 365 5P6/1 mm 2 44 - 57 cm 220 x 215 x 365 5P6/2 mm 3 47 - 60 cm 240 x 210 x 365 5P6/3 mm

Wooden Tongue

• for connections of wooden pieces of exoskeletal prosthetics

PU = 20 pieces

Length x Height x Thickness Item-No. 80 x 40 x 4 mm 6P13

Plantar Flexion Bumper

• tapered 15/22 mm, for universal use with single axis feet

Version Item-No. soft 2P36

Trouser Protector, ﬂat

Length Side Item-No. 20,5 cm left 6P16/L 20,5 cm right 6P16/R

www.streifeneder.com/op 237 Accessories Accessories

Knee Protector

• with channel for a webbing strap 65T1/45BW (45 mm) • big incised ﬂaps

Item-No. 4P14/P

Clamp for Webbing Strap

• oval, stainless steel, stainless nickel-plated, for 35 mm limiting strap 55T8/35W

Item-No. 4P11

Lateral Belt Retainer Plate with Screw

Material • steel • nickel-plated

Application • for attachment of so-called „Schlesier’s bandage“ at the laterial socket wall of above knee prostheses

Characteristics • trochanter plate with three drill-holes for direct attachment to the lateral socket wall

PU = 1 piece

Neck height Ø Base plate Item-No. 8 mm 35 mm 8P14

Suspension Nut

Diameter Thread Item-No. 21,5 mm M4 8P10

238 www.streifeneder.com/op Accessories Accessories

Lamination Disk

Material • stainless steel

Application • to anchor in silicone (HTV), pre-preg and laminating resins

Characteristics • with 3 slots • corrosion-resistant

PU = 1 piece

Thread diameter x Head diameter x Length Item-No. M4 x 15 x 4,8 mm 34P9

Suspension Stud Screw

• nickel-plated and polished

Head diameter Thread Item-No. 11 mm M4 8P7/1

Transtibial Prosthetic Leg Splints

• with ball bearing • upper bar length: 270 mm • lower bar length: 125 mm • bar width: 20 mm • bar thickness: 3 mm • milled head: 20 x 4 mm • ball bearing: 4 x 13 x 5 mm • weight: 310 g

PU = 1 pair

Item-No. 21P44

Ball Bearing

• ball bearing for transtibial prosthetic leg splint 21P44

Material Size Item-No. Stainl. steel 4 x 13 x 5 mm 32P7

www.streifeneder.com/op 239 Accessories Accessories

Prosthetic Knee Joint

• for plastic and wooden prostheses, stainless steel, forged, elegant light version with concealed extension stop and 3-part joint • upper bar length: 345 mm • lower bar length: 150 mm • bar width: 22 mm • bar thickness: 3 mm • milled head: 24 x 4 mm • ball bearing: 4 x 16 x 5 mm • weight: 450 g

PU = 1 pair

Side Item-No. right 21P48/R left 21P48/L

Prosthetic Knee Joint

• for plastic and wooden prostheses, like item 21P48, but joint head offset on both sides • upper bar length: 345 mm • lower bar length: 150 mm • bar width: 22 mm • bar thickness: 3 mm • milled head: 24 x 4 mm • ball bearing: 4 x 16 x 5 mm • weight: 450 g

PU = 1 pair

Item-No. 21P49

Ball Bearing

• complete

Size Item-No. 4 x 16 x 5 mm 32P5 4,5 x 18 x 5 mm 32P6 5 x 16 x 5 mm 32P1 6 x 19 x 6 mm 32P3

240 www.streifeneder.com/op Accessories Accessories

Binding Head Screw

• joint screw

A = total length, B = head diameter, C = for ball bearing size, D = thread size

A B C D Item-No. 13 mm 12 mm 4 x 16 x 5 M5 32P21 mm 16 mm 12 mm 5 x 16 x 5 M5 32P11/12 mm 16 mm 14 mm 5 x 16 x 5 M5 32P11/14 mm 18 mm 14 mm 6 x 19 x 6 M6 32P13 mm

Truss Head Screw

• nickel-plated

Thread Head ø Length Item-No. M3 8 mm 5 mm 30P4/2 M3,5 8 mm 5 mm 30P4/5

www.streifeneder.com/op 241 Accessories Accessories

Socket Cap Screw

Material Size Weight Item-No. Steel zinc-plated M4 x 15 mm 2,4 g 22A2/M4x15 Steel 12.9 black M4 x 22 mm 3,0 g 22A2/M4x22 Steel 10.9 zinc-plated M5 x 10 mm 3,0 g 22A2/M5x10 Steel zinc-plated M5 x 14 mm 3,2 g 22A2/M5x14 Steel 12.9 black M5 x 20 mm 4,0 g 22A2/M5x20 Steel 12.9 black M5 x 30 mm 5,4 g 22A2/M5x30 Steel zinc-plated M6 x 8 mm 4,2 g 22A2/M6x8 Steel 12.9 black M6 x 10 mm 5,0 g 22A2/M6x10 Steel zinc-plated M6 x 16 mm 5,2 g 22A2/M6x16 Steel zinc-plated M6 x 30 mm 7,9 g 22A2/M6x30 Steel 12.9 zinc-plated M6 x 35 mm 8,5 g 22A2/M6x35 Titanium M6 x 50 mm 8 g 16A60/M6 Steel 12.9 zinc-plated M8 x 60 mm 24 g 16A22/M8 Titanium M8 x 60 mm 18 g 16A60/M8 Titanium M8 x 85 mm 25 g 22A3/8x85 Steel 12.9 zinc-plated M10 x 60 mm 44 g 16A22/M10 Titanium M10 x 60 mm 24 g 16A60/M10 Titanium M10 x 90 mm 35 g 22A3/10x90 Steel 12.9 zinc-plated M10 x 90 mm 55 g 22A2/M10 Steel 12.9 zinc-plated M8 x 90mm 27 g 22A2/M8

Socket Cap Screw

Material Size Weight Item-No. Steel M6 x 8 mm 4,0 g 22A3/M6x8

Washer, steel

Thread Ø size Weight Item-No. M8 18 x 2 mm 2,8 g 16A7/M8U M10 22 x 2,5 mm 5,2 g 16A7/M10U

Lock Washer, steel

Thread Ø size Weight Item-No. M10 18 mm 1,2 g 16A8/M10F M8 15 mm 0,7 g 16A8/M8F

242 www.streifeneder.com/op Accessories Accessories

Countersunk Screw

Material Size Weight Item-No. Steel 10.9 zinc-plated M5 x 16 mm 3,8 g 22A5/M5x16 Steel zinc-plated M6 x 10 mm 3,0 g 22A5/M6x10 Steel 10.9 zinc-plated M6 x 12 mm 3,4 g 22A5/M6x12

Steel 10.9 zinc-plated M6 x 14 mm 3,6 g 22A5/M6x14 Steel 12.9 black M6 x 20 mm 4,3 g 22A5/M6x20 Steel 12.9 zinc-plated M6 x 25 mm 5,0 g 22A5/M6x25 Steel M6 x 35 mm 7,0 g 22A5/M6x35 Steel 10.9 M6 x 40 mm 8,0 g 22A5/M6x40 Steel 10.9 M6 x 14 mm 3,5 g 22A6/M5x14 Steel 10.9 M6 x 16 mm 5,5 g 22A6/M6x14 Steell 10.9 zinc-plated M6 x 14 mm 4,0 g 22A6/M6x16

Adjustment Set Screw/Hexagon Threaded Pin

Material Size Weight Item-No. Steel black M5 x 8 mm 2,0 g 22A2/M5x8 Steel zinc-plated M6 x 12 mm 2,4 g 22A2/M6x12

Steel black M8 x 12 mm 2,9 g 22A1/M8x12 Steel zinc-plated M8 x 12 mm 2,9 g 22A2/M8x12 Steel zinc-plated M8 x 14 mm 3,0 g 22A2/M8x14 Steel black M8 x 16 mm 3,2 g 22A1/M8x16 Steel zinc-plated M8 x 16 mm 3,2 g 22A2/M8x16

Rounded Head Screw

Material Size Weight Item-No. Steel zinc-plated M2,9 x 9,5 mm 1,5 g 22A4/29x95

Steel zinc-plated M2,9 x 13 mm 1,8 g 22A4/29x13

www.streifeneder.com/op 243

Little ABC’s of Orthopaedics

A Abdomen – area of the body between chest and pelvis Abdominal – relating to the abdomen Abduction – movement of a body part away from the midline of the body Acetabulum – concave pelvic component of the hip joint receiving the femoral head Adduction – movement of a body part towards the midline of the body Alternating – exchanging, altering Amelia – complete absence of one or several extremities Anatomy – science of structure of organisms Anesthesia – loss of feeling or sensation/narcosis Anterior – front Anteversion – forward tilt of a body part Antivarus – against varus malalignment Aponeurosis – a ﬁbrous sheet of tissue by which certain muscles are attached to bones Articulation, articulating – a joint, concerning a joint Atrophy, to atrophy – shrinkage, wastage of biological tissue (e. g. muscle atrophy) Axilla, axillary – the armpit, relating to the armpit

B Bandage, to bandage – wrapping, dressing; sense of: elastic support, applying bandages, taping Biceps – two headed (e. g. biceps muscle) Bow-leg – varus malalignment of the longitudinal axis of the leg

C Calcaneus – heel bone Capsular – retaining to an articular capsule Catalyser – chemical agent causing a chemical reaction (e. g. hardening powder, -paste) Caudal – towards the tail, below, backside Cerebrum, cerebral – the major part of the brain, occupying the upper part of the cranium, pertaining to the cerebrum Cervical (cervical–region) – pertaining to the neck area Chronic – long term (disease; opposite of acute) Condyle, condylar – joint head, pertaining to the joint head Congruence, congruent – match, matching, identical Concave – hollow, curved inwards Conservative – conciliatory, maintaining, in the sense of non-surgical Constitution – physical shape Contraction, to contract – tightening, shortening of soft tissue with joint malposition Contralateral – reciprocal, located on the other side of the body Contusion – bruise Convex – curved to the front or outside Little ABC’s of Orthopaedics

C Claw foot – flexion contraction of the toes Cranial – head, above Cyst – abnormal, closed sac-like structure within a tissue that contains a liquid, gaseous, or semisolid substance (e. g. Baker‘s-cyst in the back of the knee)

D Decubitus, decubital – pressure damage, pressure sore Derotation – correctional rotation Detorsion – back rotation, correctional rotation (e. g. detorsion insole) Dexter – right Diagnosis, to diagnose – searching and finding a cause and details of disease Digital – pertaining to finger or toe Digitus – finger or toe Dislocation, dislocate – shift, to shift Distal – away, away from body Distorsion – sprained, twisted (e. g. joints) Dorsal – back side Duroplast – synthetic material, which is, once it has hardened, not mouldable anymore by heat

E Endogenous – caused by inner reasons Et – and Exogenous – caused by outer reasons Extension – stretching, extension of a body part Extra – beyond Extremities – limbs

F Fascia – covering around muscles and tendons Femur – bone that extends from the pelvis to the knee Fixation, fixed – position that cannot be altered passively Flexion – bending a joint (opposite of extension) Fracture – break in a bone Frontal – to the front (front surface)

G Gibbus – curve in the spine causing a bump or hump on the back, strong kyphotic spine deformation Gluteus, gluteal – buttocks muscle, pertaining to buttocks Gocht manoeuvre – special technique to mold the plaster–cast for the ischium bar Gonarthrosis, gonitis – inflammation of the knee joint Little ABC’s of Orthopaedics

H Haematoma – bruise Hallux – big toe Hammer toe – flexed contraction position of a toe in the middle or end joint during dorsal tilting of the metacarpophalangeal joint Heidelberg angle – AFO (ankle foot orthosis to lift the forefoot) Hemi – half Heterogenous – mixed combination, disparate Hinge joint (Articulatio ginglymus) – single-axle joint (e. g. finger joint) Hyper lordosis – lumbar lordosis, hollow back Homogenous – uniform, congeneric Hyper – prefix: more than the norm Hypo – prefix: less than the norm

I Idiopathic – spontaneous, independent, starting without known reason (e. g. idiopathic scoliosis) Immobilization, to immobilize – to prevent motion of a joint or segment Incongruity, incongruent – mismatch, mismatched Incontinence – inability to control urination or defecation Indication, to indicate – advice, necessity, to advise, make something necessary Infra – under or below Initial – beginning Insert – orthopaedic foot support, foot cushion for customized shoes Instability, instable – missing stability, loose Insufficiency, insufficient – functional weakness, inadequate Interim treatment – temporary, tentative treatment before the final treatment Irreversible – final, permanently Ischium, ischial – seat bone, pertaining to the seat bone Ischium bar – support point of the seat bone in prostheses or ortheses

K KBM (abbreviation) – Kondylen Bettung Münster Knee cap – molded knee brace made of textile rubberlike fabric Kyphosis – rather ﬂat backward bent scoliosis

L Lesion – injury Level Pelvis – aligned pelvis Lateral – away from the center Ligament, ligamentary – band of ﬁbrous tissue connecting bones, concerning the ligaments Longuette – oblong reinforcing material, usually several layers (e. g. plaster bandage) Luxation, to luxate – sprain, to sprain Little ABC’s of Orthopaedics

M Medial – inside, center, toward the mid-line Metatarsal – long bones between the tarsal bones and the toes Modular system – orthopaedic aid or prosthesis construction with various ﬁnished components (modular concept) Morbus – disease, ailment

N Naviculare – short term for os naviculare = navicular bone of foot (or hand – scaphoid bone) Necrosis – necrotic – dead tissue, mortiﬁed Neuropathy, neuropathic – nervous disorder, nervous affection

O Oedema, oedematic – swelling, swollen Orthosis – splint, brace device, corset, support Orthopaedics – science of recognition and treatment of inherent or acquired defects of the musculoskeletal system (orthos = straight, right and paedia = childhood) Orthoprosthesis – construction of a proximal orthotic element and a distal prosthetic element Ossiﬁcation, osseous – bone formation, bony Osteomyelitis – infection of bone and bone marrow Osteosynthesis – connection of two or more bones by means of metal plates, screws, nails or wires

P Pad – upholstering device in an orthosis or shoe Palma, palmar – inner hand surface, pertaining to the inner hand surface Palpation, to palpate – examination by touching with the hand Paralysis, paralytic – loss of motor function, lame (only in the sense of limpness) Paresis, paretic – loss of motor function (limp or spastic) Patella – kneecap Pathological – unnatural, abnormal, morbid Pelvic obliquity – misaligned pelvis, asymmetrical pelvis height (e. g. caused by unequal leg length) Periphery, peripheral – outer region, outside (e. g. peripheral arterial disease = PAD) Peroneus, peroneal – retaining to the calf–bone (e. g. nervus peronaeus communis) Peroneus–spring – ankle–foot orthosis to lift and guide the foot in case of limpness/loss of control Pes – foot Pes adductus – forefoot inverted, adducted, medially misaligned forefoot–position Pes calcaneus – walking on the heel (steep slope position of the forefoot) Pes cavus – contracted foot (excessive longitudinal arch of the foot) Pes equinus – pointed foot (excessive plantar flexion of the whole foot) Pes equinus varus adductus – club foot (combined malposition of the foot) Pes planus – flat foot (collapsed medial arch) Pes planus valgus – knock-flat foot (collapsed medial arch with kinked lower ankle joint) Little ABC’s of Orthopaedics

P Plantar – pertaining to the foot sole Poliomyelitis – paralysis caused by the polio virus infecting the anterior horn cells of the spinal cord Pollex – thumb Poly – prefix: multi, several Post – prefix: after, behind Posterior – behind, toward the back of… Postoperative post op – after surgery Pre – prefix: before, prior to Pressure lesion – surface damage of skin and tissue due to extensive pressure exposure Prevention – precaution Prognosis, prognostic – preview, expected Progredience, progredient – progression (of disease), advancing progressive – advancing Prominence, prominent – protrusion, protruding Pronation – rotation of hand or foot in long axis facing outwards or dorsally Prophylaxis, prophylactic – prevention, preventive Prosthesis – externally applied device used to replace wholly, or in part, an absent or deficient limb segment Proximal – nearest to the trunk; towards the trunk Pseudo arthrosis – non-union of a fractured bone PTB – (abbrevation) – patella tendon bearing = patella tendon – load principle PTS – (abbrevation) – PTB–supracondylar prosthesis = lower leg prosthesis, reaching over femurcondyles

Q Quadriceps – short for Musculus quadriceps = four headed muscle in the anterior thigh Quengel Hinged Brace – joint bending or stretching brace with hinges

R Radius – spoke bone, one of the forearm bones Recidivism, recidiving – relapse, recurrence (of a disease), relapsing Reclination, to reclinate – backward tilt, to tilt backwards Redression, to redress – to force or bend back Rehabilitation, to rehabilitate – enabling persons with disabilities to reach and maintain their optimal sensory, intellectual, psychiatric and/or social functional levels Retroversion – backward turn Reversible – convertible Rotation, to rotate – turn, turning Little ABC’s of Orthopaedics

S Sagittal – following the arrow, straight direction Saddle joint (articulatio sellaris) – double-axis joint (e. g. thumb saddle joint Carpometacarpal-l-joint) Shore-hardness – measuring unit for the degree of hardness of elastic materials Sinister – left Scoliosis, scoliotic – lateral deviation of the spine and rotation of the vertebrae around the long axis of the spine Spasticity, spastic – cramping, cramped Spina, spinal – referring to the spine (vertebral column) Spondyle – retaining to the spine (e. g. spondyle arthrosis = arthrosis of the vertebral joints) Subductus – laying underneath (e. g. digitus subductus = toe, laying crossed underneath) Subluxation – partial dislocation of a joint Superductus – laying over (e. g. digitus sperductus = toe, laying over dorsally) Supination – rotation of hand or foot around long axis with palm forward or foot inward Supination wedge – medial or inner elevation of an orthopaedic insole Supra – preﬁx: upper, above Swiss cam lock / Swiss lock system – detention of a splint joint (e. g. of an orthotic brace) Symphysis – pubic symphysis, midline cartilaginous pubic bone connection (synchondrosis) Symptom, symptomatic – sign, Indication of a disease, indicating a disease Syndesmosis – slightly movable articulation where the contiguous bony surfaces are united by an interosseous ligament Syndrome – disease pattern Synostosis – bony fusion between two bones

T Talus – bone that articulates with the tibia and ﬁbula to form the ankle joint Tarsus, tarsal – heel part of the foot, pertaining to the heel part of the foot Thermoplast – plastic material re-shapeable under heat application Three-point-correction principle – correctional therapy by leverage effect with surface pressure- application at three contact points Thomas splint – a long leg relief splint that extends from a ring at the hip to beyond the foot, e. g. for aseptic hip joint necrosis Tonus – tension condition of muscles Torsion – twisting Trochanter – muscle insertion point, bony protrusion lateral-proximally at the femur Tuber – hunch, knob (e. g. tuber ischiadicum) Tuberosity – bony protrusion, muscle insertion/ﬁxation point

U Ulna – inner and longer of the two bones of the forearm Little ABC’s of Orthopaedics

V Valgus – X-shaped joint alignment Varicosis – disease of the veins, varication Varices – distended veins Varus – O-shaped joint alignment Ventral – relating to or situated on or close to the abdomen; abdominal, front Vertex – centre of a curve, maximum of a curve Volar – relating to the palm of the hand V2A-steel – stainless steel

W Walking – milling, softening, staking e. g. orthopaedic leather

Source: “Children‘s orthopaedic techniques by R. Bernbeck, J. Pramschiefer, H. D. Stolle“, published by Thieme, Stuttgart

Explanation of Symbols

Textile Care Symbols

Hand wash

30 °C normal wash

40 °C normal wash

60 °C normal wash

Do not iron

Do not bleach

No dry cleaning

Do not tumble dry

Spray disinfection

Danger Symbols

Flame

Exclamation mark Index Index

1P24...... 229 10A21...... 78, 204 1S1...... 131 10A22...... 79 1S18...... 133 10A23...... 79 1S2...... 132 10A24...... 79 1S22...... 129 10A25...... 78 1S3...... 130 10A3...... 75 1S4...... 130 10A30...... 70 2P36...... 237 10A40...... 70 3A1000...... 91 10A41...... 66 3A15...... 104-105 10A42...... 67 3A16...... 97 10A43...... 67-68 3A17...... 100-101 10A44...... 76 3A18...... 98 10A45...... 68 3A1800...... 92 10A46...... 67 3A20...... 107 10A5...... 77 3A2000...... 93, 95-96 10A50...... 69 3A21...... 112, 114 10A6...... 75 3A2100...... 94-95 10A60...... 71 3A22...... 102-103 10A7...... 75 3A2200...... 95-96 10A8...... 78 3A23...... 109 10A89...... 74 3A25...... 114 10A9...... 78 3A30...... 111 10A90...... 71-72 3A32...... 108 10A91...... 72, 74 3A33...... 100 10A92...... 73 3A34...... 102 10A93...... 73 3A36...... 106 10A94...... 72 3A40...... 99 10A95...... 74 3A49...... 104 10A96...... 72, 74 3A54...... 113 10H1...... 159 3A810...... 90 10H2...... 159 3A850...... 89-90 10H3...... 159 3K31...... 22 10H4...... 159 3K41...... 22 10H5...... 160 3K51...... 21 10H7...... 160 3K61...... 22-23 10S1...... 193-194, 196, 209-212 3P42...... 220 10S2...... 193, 209 3S50...... 152 10S3...... 193, 209, 211-212 4A34...... 109 10S300...... 211 4A40...... 101 10S4...... 208-209 4A46...... 110 11A11...... 65-66 4P11...... 238 11A12...... 65 4P14...... 238 11A125...... 64 4P70...... 154 11A13...... 63 5P6...... 237 11A14...... 71 6K26...... 25 11A15...... 66 6P13...... 237 11A16...... 71 6P16...... 237 11A17...... 65 6P20...... 231 11A20...... 65 6P22...... 231 11A225...... 64 6P25...... 231 11A250...... 64 6P27...... 232 12A1...... 80 6P29...... 232 12A3...... 80-81 6P30...... 232 12A5...... 80 6P32...... 232 12A7...... 80 6P34...... 233 12A8...... 81 6P35...... 233 12A9...... 81 6P36...... 232 13A2...... 155 6P38...... 232 15A2...... 62 6P39...... 232 15A3...... 62 6P50...... 230 15A4...... 62 6S1...... 156 15A5...... 63 7A4...... 117 15K2...... 18 7A5...... 118 15S1...... 195 8P10...... 238 15S2...... 195 8P14...... 238 15S3...... 195, 211 8P7...... 239 15S4...... 196 8S1...... 191-192 16A1...... 46 9S1...... 191 16A10...... 200 10A1...... 77 16A2...... 46-47 10A100...... 70 16A22...... 242 10A16...... 63 16A3...... 200 10A2...... 77 16A30...... 201

254 www.streifeneder.com/op Index Index

10A21...... 78, 204 16A40...... 206 30A13...... 39 10A22...... 79 16A5...... 200 30A14...... 40 10A23...... 79 16A6...... 46 30A15...... 39 10A24...... 79 16A60...... 242 30A150...... 35 10A25...... 78 16A7...... 46, 242 30A151...... 36 10A3...... 75 16A8...... 242 30A16...... 38 10A30...... 70 17A1...... 155 30A175...... 36 10A40...... 70 20A1...... 154 30A18...... 41 10A41...... 66 20A17...... 228 30A19...... 40 10A42...... 67 20A18...... 229 30A2...... 33 10A43...... 67-68 20A19...... 228 30A20...... 32 10A44...... 76 20A57...... 181 30A21...... 34 10A45...... 68 20A58...... 181 30A225...... 37 10A46...... 67 20A61...... 176 30A23...... 42 10A5...... 77 20A74...... 180 30A24...... 43 10A50...... 69 20L100...... 143 30A25...... 44 10A6...... 75 20L200...... 143 30A26...... 17 10A60...... 71 20S1...... 197-198 30A27...... 37 10A7...... 75 20S2...... 197 30A3...... 35 10A8...... 78 20S3...... 197 30A30...... 45 10A89...... 74 21A30...... 98 30A31...... 45 10A9...... 78 21A40...... 105 30A4...... 33 10A90...... 71-72 21E18...... 99 30A40...... 99 10A91...... 72, 74 21L100...... 145 30A5...... 34 10A92...... 73 21L200...... 145 30A6...... 38 10A93...... 73 21P44...... 239 30A9...... 32 10A94...... 72 21P48...... 240 30L1...... 151 10A95...... 74 21P49...... 240 30L5...... 151 10A96...... 72, 74 22A1...... 243 30P4...... 241 10H1...... 159 22A10...... 75 30S1...... 199, 201-202 10H2...... 159 22A100...... 213 30S2...... 199 10H3...... 159 22A11...... 212 30S3...... 199, 211 10H4...... 159 22A13...... 200 30S4...... 207-209 10H5...... 160 22A2...... 242-243 31A1...... 51 10H7...... 160 22A3...... 51, 242 31A2...... 51 10S1...... 193-194, 196, 209-212 22A4...... 243 31A3...... 52 10S2...... 193, 209 22A5...... 198 31A4...... 52 10S3...... 193, 209, 211-212 22A5/M5x16...... 21, 243 31A5...... 52 10S300...... 211 22A8...... 79 31A6...... 53 10S4...... 208-209 22A9...... 80, 204 32A1...... 49-50 11A11...... 65-66 22L100...... 147 32A11...... 49 11A12...... 65 22L200...... 147 32A2...... 47, 49 11A125...... 64 23A1...... 154 32A3...... 47 11A13...... 63 25A10...... 170 32A4...... 48 11A14...... 71 25A11...... 170 32A5...... 48 11A15...... 66 25A12...... 171 32A6...... 48 11A16...... 71 25A13...... 171 32P1...... 240 11A17...... 65 25A14...... 172 32P11...... 241 11A20...... 65 25A15...... 177 32P13...... 241 11A225...... 64 25A16...... 177 32P21...... 241 11A250...... 64 25A20...... 173 32P3...... 240 12A1...... 80 25A21...... 173 32P5...... 240 12A3...... 80-81 25A23...... 174 32P6...... 240 12A5...... 80 25A24...... 174 32P7...... 239 12A7...... 80 25A25...... 178 34P9...... 239 12A8...... 81 25A30...... 175 40L110...... 134 12A9...... 81 25A31...... 175 40L200...... 134 13A2...... 155 25A35...... 179 40S1...... 203 15A2...... 62 25A50...... 168 40S2...... 203 15A3...... 62 25A51...... 169 40S3...... 203 15A4...... 62 25L100...... 144 41L110...... 135 15A5...... 63 25L200...... 144 41L200...... 135 15K2...... 18 26A10...... 165 50L110...... 136 15S1...... 195 26A20...... 165 50L200...... 136 15S2...... 195 26A30...... 165 50S1...... 205 15S3...... 195, 211 26L100...... 146 50S2...... 205 15S4...... 196 26L200...... 146 50S3...... 205, 211 16A1...... 46 27L100...... 148 50S4...... 208 16A10...... 200 27L200...... 148 51L110...... 137 16A2...... 46-47 28A1...... 232 51L200...... 137 16A22...... 242 28A2...... 63 51S1...... 131 16A3...... 200 28A3...... 61 55A1...... 31 16A30...... 201 29A1...... 47 60A147...... 223

www.streifeneder.com/op 255 Index

60A42...... 222 60A47...... 222 60A52...... 222 60A7...... 220 60A8...... 220 60A9...... 221 60L1...... 138 60L5...... 139 60S2...... 206-207 61A147...... 223 61A47...... 222 62A152...... 225 62A52...... 224 63A47...... 224 65A10...... 225 65A11...... 226 65A12...... 226 65A13...... 227 65A14...... 227 76M10...... 219 76M11...... 219 100A42...... 67 100K23...... 20 100K3...... 20 100K4...... 21 100K50...... 21 100K90...... 19 100K92...... 20 110K11...... 19 110K12...... 19 110K15...... 19 117P22...... 213 120K7...... 20 150A3...... 61 150A4...... 61 150P1...... 212 151S1...... 131 160K1...... 17 163P29...... 235 163P30...... 235 163P31...... 235 163P32...... 235 163P33...... 236 163P34...... 236 163P35...... 236 163P36...... 236 164P11...... 234 164P25...... 234 165P23...... 219 166P55...... 160 173P15...... 211 200K15...... 24 300A1...... 153 451A1...... 167 451A2...... 167 452A1...... 166 452A2...... 166 600K32...... 24 600K7...... 24

256 www.streifeneder.com/op Index Directory Directory

Cord Locking System -Modular-...... 191 3 Cosmetic Soft Foam Cover...... 24, 220-227 3-Arm-Anchor Connection M36 for KINEGEN.stream..... 96 Cotton Stump Sock for AK-amputees...... 178 3A1000 KINEGEN.air Brake Knee Joint...... 91 Cotton Stump Sock for BK-amputees...... 173-174 3A15 Modular Brake Knee Joint Stainl. Steel...... 104 Counter-Sunk Screw...... 21 3A16 Modular Single Axis Knee Joint Stainless Steel..... 97 Countersink Bolt...... 198 3A17 Modular Single Axis Knee Joint Stainless Steel... 100 Countersunk Screw...... 243 3A18 Modular Single Axis Knee Joint Stainless Steel..... 98 Cover for KINEGEN.basic and KINEGEN.guard...... 90 3A1800 KINEGEN.air-active Polycentr. Knee Joint...... 92 Cover with Logo for 3A1000 KINEGEN.air...... 91 3A20 Modular 4-Bar Linkage Knee Joint Stainl. Steel.. 107 D 3A2000 KINEGEN.stream Polycentr. Knee Joint...... 93 3A21 Modular 4-Bar Linkage Knee Joint Stainl. Steel.. 112 DAW-Nylon Sheath, standard...... 168 3A2100 KINEGEN.stream Polycentr. Knee Joint...... 94 DAW-Nylon-Sheath, knee ex...... 169 3A22 Modular Single Axis Knee Joint Stainl. Steel...... 102 Deep-Drawing Adapter Ring...... 198 3A2200 KINEGEN.stream Polycentr. Knee Joint...... 95 Derma-Flex Cosmetic Skin...... 220 3A23 Modular 4-Bar Linkage Knee Joint Stainl. Steel.. 109 Diagometer...... 235 3A25 Modular 4-Bar Linkage Knee Joint Stainl. Steel.. 114 Digital Camera...... 236 3A30 Modular 4-Bar Linkage Knee Joint Titanium...... 111 Disinfection Gel for Hands...... 160 3A32 Modular 4-Bar Linkage Knee Joint Titanium...... 108 Dorsal Flexion Bumper...... 48-49 3A33 Modular Single Axis Knee Joint Titanium...... 100 Double Adapter -Aluminum-...... 69 3A34 Modular Single Axis Knee Joint Titanium...... 102 Double Adapter -Stainless Steel-...... 69 3A36 Modular 4-Bar Linkage Knee Joint Titanium...... 106 Double Adapter -Titanium-...... 21, 69 3A40 Modular Knee Joint -Light Metal-...... 99 Double Adapter with Adjustment Core...... 71 3A49 Modular Brake Knee Joint -Titanium-...... 104 Double Adapter with Two Adjustment Cores...... 71 3A54 Modular 4-Bar Linkage Knee Joint Titanium...... 113 Dummy for Lamination Disc Series 200...... 198 3A810 KINEGEN.basic Brake Knee Joint...... 90 Dummy for Vacuum-Lock 30S4...... 207 3A850 KINEGEN.guard Brake Knee Joint with Lock...... 89 DYNA-base Foot...... 31 3K31 Modular Knee Joint...... 22 Dynamic S.A.C.H. Foot with Split Toe...... 37 3K41 Modular Knee Joint with Lock...... 22 E 3K51 Modular Hip Joint...... 21 Easy-Lock Pin -with Drill Hole-...... 212 3K61 Modular Knee Joint...... 22 Elastomer Bumper Set for 3A810 and 3A850...... 90 4 Elastomer Damper for KINEGEN.stream...... 96 4-Arm-Anchor Connection M36 for KINEGEN.stream..... 95 Exhaust Valve for BK Amputations...... 230 Extension Assist for 3A15 and 3A49...... 105 7 F 7A4 Modular Hip Joint -Aluminum-...... 117 7A5 Modular Hip Joint -Titanium-...... 118 Flat Rubber Valve -Automatic-...... 232 Flat Rubber Valve -Plastic Pin-...... 232 A Flat Rubber Valve -Stainless Steel Pin-...... 232 Above-Knee Compression Stocking...... 167 Foot without Joint...... 40 Above-Knee Socket...... 237 G Adjusting Device for Modular Prostheses -Aluminum-... 70 Adjustment Core Adapter -Stainless Steel-...... 23 Geriatric S.A.C.H. Foot, light...... 32 Adjustment Core Clamping Jaws...... 219 Geriatric S.A.C.H. Foot, light, high heel...... 32 Adjustment Set Screw/Hexagon Threaded Pin...... 243 Geriatric-Single-Axis-Foot, light, high heel...... 39 AK Cosmetic Soft Foam Cover...... 225 H AK silicone liner...... 138-139 High Performance Maintenance Spray...... 213 AK-Suspender...... 153 Hopper...... 201 Ankle Block -PUR- light...... 51 Ankle Block -Wood-...... 51-52 I B Integrated Patient Key...... 210 Ball Bearing...... 239-240 K Bearing Seat...... 49 Knee Protector...... 238 Below-Knee Compression Stocking...... 166 Knee sleeve...... 151 Binding Head Screw...... 241 BK-Suspender...... 154 L Bolted Connection for S.A.C.H. Foot...... 47 Lamination Anchor...... 112 Bolted Connection Set...... 51 Lamination Anchor -Stainless Steel-...... 23 Bolted Connection Set, M10...... 53 Lamination Anchor -Titanium-...... 201 Bolted Connection Set, M8...... 53 Lamination Disc...... 206 C Lamination Disc for Cord Locking System...... 191 Lamination Disc for Series 200...... 198 Carrying Bag for Prostheses made of Cotton...... 234 Lamination Disc, round or square -Aluminum-...... 200 Clamp for Webbing Strap...... 238 Lamination Disk...... 239 Clutch Lock Block Unit...... 209 Lamination Dummy...... 75-76, 79-81, 200-201, 206 Connection Adapter f. Children with Adj. Core...... 20 Lamination Dummy for Lock Series 300...... 202 Connection Cap...... 48-49 Lamination Dummy for Lock Series 400...... 204 ContexGel-Liner 6 mm...... 145 Lamination Dummy for Lock Series 500...... 205 ContexGel-Liner, 3 mm...... 143-144 Lamination Dummy for Series 100...... 194, 196 ContexGel-Liner, 6 mm...... 146 Lamination Plate for 7A4...... 117 ContexGel-Liner, 9 mm...... 147-148 Lamination Plate for 7A5...... 118 Cord Locking System -Lamination-...... 191 Lanyard...... 192

258 www.streifeneder.com/op Directory Directory

Cord Locking System -Modular-...... 191 Lanyard with Liner Connection Screw...... 192 Rubber Suspension Sleeve...... 154 Cosmetic Soft Foam Cover...... 24, 220-227 Latching Clamp...... 192 Rubber Valve with Seat Ring...... 233 Cotton Stump Sock for AK-amputees...... 178 Lateral Belt Retainer Plate with Screw...... 238 Rubber-Cover-Set for KINEGEN.stream...... 96 Cotton Stump Sock for BK-amputees...... 173-174 Light Alloy Tube, Ø 30 mm...... 63 S Counter-Sunk Screw...... 21 Light Alloy Tube, Ø 34 mm...... 61 Countersink Bolt...... 198 Lock Control Unit...... 109 S.A.C.H. Foot Adapter -Aluminum-...... 17, 46 Countersunk Screw...... 243 Lock Control Unit with Lock Mechanism...... 110 S.A.C.H. Foot Adapter -Stainless Steel-...... 46 Cover for KINEGEN.basic and KINEGEN.guard...... 90 Lock Series 100...... 193 S.A.C.H. Foot Adapter -Titanium-...... 46 Cover with Logo for 3A1000 KINEGEN.air...... 91 Lock Series 150...... 195 S.A.C.H. Foot Connection Disc...... 47 S.A.C.H. Foot for Bathing...... 38 D Lock Series 200...... 197 Lock Series 300...... 199 S.A.C.H. Foot for Children with Split Toe...... 17 DAW-Nylon Sheath, standard...... 168 Lock Series 400...... 203 S.A.C.H. Foot for Men...... 34 DAW-Nylon-Sheath, knee ex...... 169 Lock Series 500...... 205 S.A.C.H. Foot for Men up to 150 kg with Adapter...... 36 Deep-Drawing Adapter Ring...... 198 Lock Series 600...... 206 S.A.C.H. Foot for Men up to 175 kg with Adapter...... 36 S.A.C.H. Foot for Men up to 225 kg, with glued Derma-Flex Cosmetic Skin...... 220 Lock Unit Milling Cutter...... 212 S.A.C.H. Foot Adapter...... 37 Diagometer...... 235 Lock Washer, steel...... 242 S.A.C.H. Foot for Men with Split Toe...... 43-44 Digital Camera...... 236 Locking Unit for 3A17 and 3A33...... 101 Disinfection Gel for Hands...... 160 S.A.C.H. Foot for Men with Split Toe, int. heel wedge... 42 Dorsal Flexion Bumper...... 48-49 M S.A.C.H. Foot for Men, high heel...... 34 Double Adapter -Aluminum-...... 69 M.A.S. Compressive Measuring Tape...... 236 S.A.C.H. Foot for Men, integrated heel wedge...... 35 Double Adapter -Stainless Steel-...... 69 M.A.S. Tool Kit...... 235 S.A.C.H. Foot for Men, up to 150 kg...... 35 Double Adapter -Titanium-...... 21, 69 M.A.S.-Tool Kit...... 235 S.A.C.H. Foot for Women, high heel...... 33 Double Adapter with Adjustment Core...... 71 Magnetic Felt Jaws...... 219 S.A.C.H. Foot for Women, high heel, int. heel wedge.... 33 Double Adapter with Two Adjustment Cores...... 71 Mini Lamination Disc -Titanium-...... 200 S.A.C.H.-Foot for Men with polymer core...... 45 Dummy for Lamination Disc Series 200...... 198 Modular Extension Assist for 3A16 and 3A18...... 98 Screw Adapter -Titanium-, Ø 34 mm...... 64 Dummy for Vacuum-Lock 30S4...... 207 Mounting Key...... 211 Screw Valve for Lamination Technique...... 231 Screw Valve for Thermoforming Technique...... 231 DYNA-base Foot...... 31 N Dynamic S.A.C.H. Foot with Split Toe...... 37 Sealing Disc...... 208 Nylon Cosmetic Stocking for Children...... 24 Sealing Grease (Stickwax)...... 213 E Nylon Cosmetic Stockings...... 228 Sealing Plunger, Series 300...... 208 Easy-Lock Pin -with Drill Hole-...... 212 Nylon Stockings...... 228 Sealing Plunger, Series 500...... 208 Elastomer Bumper Set for 3A810 and 3A850...... 90 Nylon Stump Sock for AK-amputees...... 179 Seat Ring...... 232 Elastomer Damper for KINEGEN.stream...... 96 Nylon Stump Sock for BK-amputees...... 175-176 Service Parts Kit for 6P50...... 230 Exhaust Valve for BK Amputations...... 230 Nylon-Carrying Bag for Prostheses...... 234 Service Parts Kit for Shuttle Lock 60S2...... 207 Extension Assist for 3A15 and 3A49...... 105 Nylon-Carrying Bag short for Prostheses...... 234 Service Parts Set...... 48 F Nylon-Connection...... 229 Service Parts Set for 3A15 and 3A49...... 105 O Service Parts Set for 3A17 and 3A33...... 101 Flat Rubber Valve -Automatic-...... 232 Service Parts Set for 3A20 and 3A36...... 107 Flat Rubber Valve -Plastic Pin-...... 232 O-Ring...... 209 Service Parts Set for 3A21, 3A25, 3A30 and 3A54...... 114 Flat Rubber Valve -Stainless Steel Pin-...... 232 P Service Parts Set for 3A22 and 3A34...... 103 Foot without Joint...... 40 Service Parts Set for 3A23 and 3A32...... 109 Patient Key...... 211 Service Parts Set for 3A40...... 99 G Perlon Cable...... 99 Service Parts Set for 7A4...... 117 Geriatric S.A.C.H. Foot, light...... 32 Pin Cover...... 212 Service Parts Set for 7A5...... 118 Geriatric S.A.C.H. Foot, light, high heel...... 32 Pirogoff-Foot...... 41 Service Parts Set for Clamping Unit Ø 30 mm...... 66 Geriatric-Single-Axis-Foot, light, high heel...... 39 Plantar Flexion Bumper...... 50, 237 Service Parts Set for Clamping Unit, Ø 34 mm...... 64 Plastic Valve...... 25 H Service-Set for Easy Locks 10S3, 15S3, 30S3, 50S3...... 211 Plurimeter-V...... 236 Silencer...... 208 High Performance Maintenance Spray...... 213 Post Surgical Compression Liner...... 129 Silicone Dummy...... 66 Hopper...... 201 Post Surgical Compression Liner Sets...... 129 Silicone Liner 3 mm Comfort-Sil-Silicone...... 134 I Pressure Plate...... 74 Silicone Liner 3 mm Duo-Sil-Silicone...... 136 Prosthetic Knee Joint...... 240 Integrated Patient Key...... 210 Silicone liner 6 mm Comfort-Sil-Silicone...... 135 Protective Cover for Knee Sleeve...... 152 Silicone liner 6 mm Duo-Sil-Silicone...... 137 K Protective Covering...... 191 Silicone liner with internal matrix...... 131, 133 Push Button Extension...... 210 Knee Protector...... 238 Silicone liner with soft cushioning spot...... 132 Push Button Extension extra long...... 210 Knee sleeve...... 151 Silicone liner without internal matrix...... 130 Push Button Extension with slot...... 210 L Single-Axis-Foot Adapter -Aluminum-...... 47 Pyramid Connection for KINEGEN.stream...... 95 Single-Axis-Foot Adapter -Steel-...... 48 Lamination Anchor...... 112 R Lamination Anchor -Stainless Steel-...... 23 Single-Axis-Foot Adapter -Titanium-...... 47 Lamination Anchor -Titanium-...... 201 Ramus Angle Gauge...... 236 Single-Axis-Foot for Men...... 40 Lamination Disc...... 206 Release Cord for 3A850 KINEGEN.guard...... 89 Single-Axis-Foot for Men, high heel...... 39 Lamination Disc for Cord Locking System...... 191 Replacement Blade for Rotary Cutter...... 160 Single-Axis-Foot for Women, high heel...... 38 Lamination Disc for Series 200...... 198 Replacement Dummy Set for 6P50...... 230 Skin Care Moisturising Lotion...... 159 Lamination Disc, round or square -Aluminum-...... 200 Replacement Lock Unit...... 209 Skin Care Skin Protection Cream...... 159 Lamination Disk...... 239 Replacement Lock Washer...... 211 Skin Care Spray...... 160 Lamination Dummy...... 75-76, 79-81, 200-201, 206 Replacement Pin...... 212 Skin Care Washing Lotion...... 159 Lamination Dummy for Lock Series 300...... 202 Replacement Push Button...... 209 Slide Adapter -Aluminum-...... 67 Lamination Dummy for Lock Series 400...... 204 Replacement Tube for Tube Carrier 76M11...... 219 Slide Adapter -Titanium-...... 68 Lamination Dummy for Lock Series 500...... 205 Rotary Adapter...... 63 Slide Adapter -Titanium-, Ø 34 mm...... 67 Lamination Dummy for Series 100...... 194, 196 Rotary Cutter...... 160 Slide Adapter with Adjustment Core -Titanium-...... 67 Lamination Plate for 7A4...... 117 Rounded Head Screw...... 243 Slide Adapter with Lamination Anchor...... 66 Lamination Plate for 7A5...... 118 Rubber Cover for S.A.C.H. Foot...... 229 Slide Adapter, Ø 30 mm...... 67 Lanyard...... 192 Rubber Housing...... 233 Slide Adapter, two adjustment cores...... 68 Sliding Plate -Aluminum-...... 70

www.streifeneder.com/op 259 Directory

Slip-on aid...... 155 Winding Button Set...... 192 Socket Adapter...... 71, 73, 75-76 Wooden Tongue...... 237 Socket Adapter -Aluminum-...... 19-21 Wool Stump Sock, AK- and BK...... 180-181 Socket Adapter -Stainless Steel-...... 23, 77-78, 204 Socket Adapter with Adjustment Core -Aluminum-...... 81 Socket Adapter with Adjustment Core -Titanium-...... 75 Socket Adapter with Rotation Adjustment...... 74 Socket Adapter with Tube Clamp -Aluminum-, Ø 30 mm.81 Socket Adapter without Seat Ring -Titanium-...... 72 Socket Adapter, 4-Arm -Stainless Steel-...... 78 Socket Adapter, excentric...... 72-74 Socket Adapter, rotatable...... 72, 74, 77, 79 Socket Adapter, rotatable -Stainless Steel-...... 79 Socket Adapter, rotatable, Ø 30 mm...... 71 Socket Attachment Block...... 80 Socket Attachment Block -Aluminum-...... 80 Socket Attachment Block -Plastic-...... 20 Socket Cap Screw...... 242 Socket Cap Screw -Titanium-...... 51 Socket Head Spanner...... 211 Spare Hip Extension Assist for 7A4...... 117 Spare Parts Set for 3A1000 KINEGEN.air...... 91 Spare Pin for Shuttle Lock 60S2...... 207 Storing Bag for Prostheses made of PE (LD-PE)...... 234 Streifycone for Soft-Socket...... 156 Stump Care Agent PC30V...... 159 Stump Sock StreifyDerm...... 165 Stump Sock StreifyDerm Cushion...... 165 Stump Sock StreifyDerm Endurance...... 165 Suspension Nut...... 238 Suspension Sleeve -double stretch-...... 154 Suspension Stud Screw...... 239 T Terrycloth Stump Sock for AK-amputees...... 177 Terrycloth Stump Sock for BK-amputees...... 170-172 Transtibial Prosthetic Leg Splints...... 239 Trouser Protector, flat...... 237 Truss Head Screw...... 241 Tube -Aluminum-, Ø 22 mm...... 18 Tube Adapter -Aluminium-, Ø 30 mm...... 62 Tube Adapter -Aluminum-, Ø 22 mm...... 18 Tube Adapter -Stainless Steel-, Ø 30 mm...... 62 Tube Adapter -Stainless Steel-, Ø 34 mm...... 61 Tube Adapter -Titanium-, Ø 30 mm...... 62 Tube Adapter -Titanium-, Ø 34 mm...... 61 Tube Adapter, rotatable, Ø 30 mm...... 63 Tube Adapter, short, Ø 30 mm...... 63 Tube Carrier for Clamping Table...... 219 Tube Clamp Adapter -Aluminum-, Ø 22 mm...... 19 Tube Clamp Adapter 10° tilt, Ø 22 mm...... 19 Tube Clamp Adapter with Adj. Core -Alum.-, Ø 22 mm.19 Tube Clamp Adapter with Adjustment Core, Ø 30 mm.. 66 Tube Clamp Adapter, 20° tilt, Ø 30 mm...... 65 Tube Clamp Adapter, Ø 30 mm...... 65 Tube Clamp Adapter, Ø 34 mm...... 64 Tube Clamp Adapter,10° tilt, Ø 30 mm...... 65 Tube With Seat Ring...... 232 Tuber-M-L-Gauge...... 235 Two Hole Key...... 231 U Universal Foot Adapter -Steel-...... 49 V Vacuum Lock 30S4...... 207 Vacuum-Clutch-Lock...... 196 Vacuum-Valve...... 208 Valve Body for Flat Rubber Valves...... 232 Valve Body for Screw Valves...... 231 Vario Test Tube -Aluminum-...... 70 W Washer, steel...... 242

260 www.streifeneder.com/op Directory

Winding Button Set...... 192 Wooden Tongue...... 237 Wool Stump Sock, AK- and BK...... 180-181 Streifeneder ortho.production GmbH Moosfeldstrasse 10 82275 Emmering Germany T +49 8141 6106-0 F +49 8141 6106-70 [email protected] www.streifeneder.com/op

5W/E 2016-03