DOCSLIB.ORG

Download the Final Program

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Download the Final Program FINAL PROGRAM Opening Session OPENING SESSION Chairs: Terese Lovas, Fabrizio Scala 14|04 08:50|09:00 Oxyflame - scientific achievements from Plenary 1 Kneer Reinhold RWTH Aachen University, Germany Chair: Fabrizio Scala 14|04 09:00|10:00 fundamental research on solid oxyfuel combustion Bundeswehr University Munich, Institute for Thermodynamics, Searching the Principal Combustion Parameters Shin Junsu, Hansinger Maximilian, Pfitzner Laminar and turbulent flames 1 Shin Junsu 14|04 10:00|10:30 Munich, Germany using Deep Neural Network Michael, Klein Markus Investigation of the structure of DME cool flames Panaget Thomas, Mokrani Nabil, Batut Univerisité de Lille, PC2A - PhysicoChimie des Processus de Laminar and turbulent flames 1 Panaget Thomas enhanced by ozone-seeding in a stagnation plate Sesbastien, Fenard Yann, Pillier Laure, 14|04 10:00|10:30 Combustion et de l'Atmosphère, Villeneuve d'Ascq, France burner Vanhove Guillaume University of Magdeburg, Lab. of Fluid Dynamics and Pre-chamber turbulent hot jet ignition by DNS: Chi Cheng, Abdelsamie Abouelmagd, Laminar and turbulent flames 1 Chi Cheng 14|04 10:00|10:30 Technical Flows, Magdeburg, Germany impact of turbulence Thévenin Dominique Experimental and Numerical Investigations on TU Bergakademie Freiberg, Institute of Thermal Engineering, Extinction Strain Rates and Laminar Burning Eckart Sven, Yu Chunkan, Maas Ulrich, Laminar and turbulent flames 1 Eckart Sven 14|04 10:00|10:30 Freiberg, Germany Velocities in C2 Hydrocarbon Flames in Laminar Krause Hartmut Flat Flames Methane flames with a substitution of 50 to 100 Fritsche Chris, Eckart Sven, Shrestha TU Bergakademie Freiberg, Institute of Thermal Engineering, percent hydrogen: Experimental and numerical Laminar and turbulent flames 1 Fritsche Chris Krishna Prasad, Mauss Fabian, Krause 14|04 10:00|10:30 Freiberg, Germany investigation of the temperature and pressure Hartmut dependence of the laminar burning velocities Machine learning assisted development of a Bundeswehr University Munich, Institute for Thermodynamics, Hansinger Maximilian, Shin Junsu, Pfitzner Laminar and turbulent flames 1 Hansinger Maximilian premixed combustion model using deep residual 14|04 10:00|10:30 Munich, Germany Michael, Klein M. networks Comparison of Characteristics between the TU Bergakademie Freiberg, Institute of Thermal Engineering, Hefele Martin, Blanas Marinos, Chaves Laminar and turbulent flames 1 Hefele Martin Premixed and Non-Premixed case of CH4-H2-Air 14|04 10:00|10:30 Freiberg, Germany Humberto, Krause Hartmut Flames on a Swirl Burner System LES of a turbulent CH4/air multi-regime burner Bundeswehr University Munich, Institute of Thermodynamics, Lampmann Arne, Hansinger Maximilian, Laminar and turbulent flames 1 Lampmann Arne configuration using an artificially thickened flame 14|04 10:00|10:30 Neubiberg, Germany Pfitzner Michael model with reduced finite-rate chemistry The Influence of Flame-Wall Interaction on CO RWTH Aachen University, Institute for Combustion Niemietz Kai, Denker Dominik, Kleinheinz Laminar and turbulent flames 1 Niemietz Kai Emissions in Gas Turbine Combustors: A DNS 14|04 10:00|10:30 Technology, Aachen, Germany Konstantin, Attili Antonio, Pitsch Heinz Study RWTH Aachen University, Institute for Combustion Laminar burning velocity prediction based on vom Lehn Florian, Copa Cáceres Bruno, Laminar and turbulent flames 1 vom Lehn Florian 14|04 10:00|10:30 Technology, Aachen, Germany group contributions and artificial neural network Cai Liming, Pitsch Heinz Characteristics of bluff-body stabilized, turbulent, University of Patras, Mechanical Engineering & Aeronautics Mitsopoulos Evangelos Panagiotis, Souflas Laminar and turbulent flames 1 Mitsopoulos Evangelos Panagiotis pre-vaporized n-heptane-air flames under the 14|04 10:00|10:30 Department, Patra, Greece Konstantinos, Koutmos Panagiotis impact of inlet mixture stratification. ENEA, Department of Energy Technologies and Renewable Direct Numerical Simulation of Turbulent Lean Cecere Donato, Giacomazzi Eugenio, Laminar and turbulent flames 1 Cecere Donato 14|04 10:00|10:30 Sources, Rome, Italy Premixed CH4/H2 - Air Slot Flames at 25 bar Arcidiacono Nunzio Maria Theoretical and experimental investigation on the Eindhoven University of Technology, Mechanical Engineering Kojourimanesh Mohammad, Kornilov Viktor, Laminar and turbulent flames 1 Kojourimanesh Mohammad linear growth rate of the thermo-acoustic 14|04 10:00|10:30 Department, Eindhoven, The Netherlands Lopez Arteaga Ines, de Goey Philip combustion instability FINAL PROGRAM Budapest University of Technology and Economics, Energy Numerical modeling of waste cooking oil biodiesel Füzesi Dániel, Csemány Dávid, Cheng Laminar and turbulent flames 1 Füzesi Dániel 14|04 10:00|10:30 Engineering, Budapest, Hungary combustion in a turbulent swirl burner Tung Chong, Józsa Viktor Development of a Background Suppression Division of Combustion Physics, Lund University, Lund, Kim Haisol, Aldén Marcus, Brackmann Combustion diagnostics 1 Kim Haisol Technique for Raman Spectroscopy using 14|04 10:30|11:00 Sweden Christian Temporal Polarization Lock-in Filtering Femtosecond Rovibrational Chirped-Probe-Pulse Legros Sylvain, Barviau Benoit, Idlahcen Combustion diagnostics 1 Barviau Benoit CORIA, Reactive flows, Saint Etienne du Rouvray, France CARS for Single-Shot Thermometry in High- Saïd, Puggelli Stefano, Zurbach Stéphan, 14|04 10:30|11:00 Pressure Kerosene Spray Flames Grisch Frédéric Rajamanickam Kuppuraj, Lefebvre Frank, Insights into the dynamics of local flame extinction Gobin Carole, Godard Gilles, Lacour Combustion diagnostics 1 Rajamanickam Kuppuraj CORIA - CNRS UMR 6614, Reactive Flows, Rouen, France 14|04 10:30|11:00 events in CH4 – H2 turbulent flames Corine, Lecordier Bertrand, Cessou Armelle, Honore David CNRS-CORIA / INSA Rouen Normandie, Reactive Flows, Optimization of the temperature precision with the Xavier Pradip, Petit Sylvain, Godard Gilles, Combustion diagnostics 1 Xavier Pradip 14|04 10:30|11:00 Saint Etienne du Rouvray, France ratiometric phosphor thermometry Grisch Frédéric Université Paris-Saclay, CNRS, CentraleSupélec, Laboratoire On the feasibility of Laser-Induced Incandescence YI Junghwa, Betrancourt Christopher, Combustion diagnostics 1 YI Junghwa 14|04 10:30|11:00 EM2C, Gif-sur-Yvette, France technique for TiO2 nanoparticles analysis Darabiha Nasser, Franzelli Benedetta Laser-induced fluorescence spectra of tracer Diethelm Rebecca, Horstmann Jaqueline, Physikalisch-Technische Bundesanstalt, 3.5, Braunschweig, Combustion diagnostics 1 Diethelm Rebecca gases and investigation of temperature Brunzendorf Jens, Essmann Stefan, Markus 14|04 10:30|11:00 Germany dependencies Detlev El Moussawi Abbas, Endres Torsten, Multi-line SiO fluorescence imaging in the flame Combustion diagnostics 1 El Moussawi Abbas Universtity of Duisburg Essen, IVG-RF, Duisburg, Germany Peukert Sebastian, Dreier Thomas, Schulz 14|04 10:30|11:00 synthesis of silica nanoparticles from SiCl4 Christof RWTH Aachen University, Institute for Combustion Impact factors on ion current for premixed laminar Hellmuth Maximilian, Langer Raymond, Combustion diagnostics 1 Hellmuth Maximilian 14|04 10:30|11:00 Technology, Aachen, Germany CH4-fuel blends Chen Bingjie, Plümke Marco, Pitsch Heinz Temperature and mixing ratio fields in turbulent jet Horstmann Jacqueline, Diethelm Rebecca, Combustion diagnostics 1 Horstmann Jacqueline Universität Bielefeld, Fakultät für Chemie, Bielefeld, Germany ignition derived from Rayleigh and laser-induced Brunzendorf Jens, Essmann Stefan, Markus 14|04 10:30|11:00 fluorescence measurements Detlev Sunkavalli Viswa Ratnasri, Grosshans Measurement of the temperature field induced by Combustion diagnostics 1 Sunkavalli Viswa Holger, Brunzendorf Jens, Markus Detlev, 14|04 10:30|11:00 an electric discharge using BOS Essmann Stefan Karlsruhe Institute of Technology, Institute of Technical Investigation of a multi-phase turbulent Combustion diagnostics 1 Zenk Martin Zenk Martin, Schießl Robert 14|04 10:30|11:00 Thermodynamics, Karlsruhe, Germany combustion system by Raman spectroscopy CNR-STEMS, Istituto di Scienze e Tecnologie per l'Energia e In-Flow optical characterization of carbon De Iuliis Silvana, Migliorini Francesca, Combustion diagnostics 1 Belmuso Silvia 14|04 10:30|11:00 la Mobilità Sostenibili, Napoli, Italy nanoparticles probed from a premixed flame Belmuso Silvia, Dondè Roberto 1D HRCARS and phosphor thermometry to study The University of Edinburgh, Institute of Multiscale Escofet-Martin David, Ojo Anthony, Collins Combustion diagnostics 1 Escofet-Martin David unsteady thermal boundary layer development 14|04 10:30|11:00 Thermofluids, Edinburgh, United Kingdom Joshua, Peterson Brian with a transient pressure-temperature environment Hoang Quynh N., Vanierschot Maarten, Solid fuels combustion, pyrolysis and KU Leuven, Department of Materials Engineering, Leuven, CFD-based Simulation of the Combustion of Low- Hoang Quynh N. Croymans Tom, Pittoors Rudi, Van 14|04 11:00|11:30 gasification 1 Belgium Rank Solid Fuels in Packed Beds Caneghem Jo FINAL PROGRAM Solid fuels combustion, pyrolysis and Technical University of Darmstadt, Mechanical Engineering, Particle motion and swelling during the volatile Li Tao Li Tao, Li B., Dreizel A., Böhm B. 14|04 11:00|11:30 gasification 1 Darmstadt, Germany combustion in a laminar flow condition Cerciello Francesca, Allouis Christophe, Solid fuels combustion, pyrolysis and Morphological changes of different carbon Russo Carmela, Cortese Luciano, Apicella Senneca
Load more

Recommended publications
  • Water in Islamic Architecture: Study of the Water
    مجلة العمارة والفنون العدد الثاني عشر – الجزء اﻷول WATER IN ISLAMIC ARCHITECTURE: STUDY OF THE WATER DISPENSARY (SABIL) Assist. Prof. Dr/ Ahmed El Shakhs Assistant Professor, Architecture and Design Department, College of Engineering, Abu Dhabi University, UAE Assist. Prof. Dr/ Dalia Mohammed Ezzat Assistant Professor, Interior Design and Furniture Department, Faculty of Applied Arts, Helwan University, Egypt. ABSTRACT Water is essential to life and survival, it is not only a functional addition to Islamic architecture but also an integral part of the Islamic religion and beliefs, The Holy Quran states that "Every living thing is made of water", and the importance of this thought is visible in Islam since its used for Ablution five times daily; however, its mentioned in the Sunnah that water conservation is embedded in Islam even if you are living on a shore. The role played by water in Islamic architecture is both symbolic (representing spiritual purity) and practical (weather adjustment). Sabil is one of the emerged Islamic architectures that was used as a water dispenser, where water has been harnessed to serve and provide passers-by, it flourished under the rule of the Mamluks in Egypt where they constructed a standalone Sabil Kuttab, usually inflicted a Kuttab (Quranic School for boys) on top. This paper investigates the aesthetic, functional, and symbolic values of water in Islamic architecture, and highlights the value of Sabil as an important element in the Islamic city fall under the charity facilities, through analytical description of its architectural as well as the functional, aesthetic, and symbolic aspects which serve the concept of heritage revival by being a source of inspiration.The research problem can be framed in a set of questions; What is the importance of water as an essential element of life in Islamic architecture? What is the impact of muslim beliefs on design ? Did the formation of Islamic architecture only consider the functionality of the building and the aesthetic sides, or were hidden religeous beliefs conveyed?.
    [Show full text]
  • Environmental Impact Assessment Study Report for Proposed Serviced Apartments on Plot L.R
    ENVIRONMENTAL IMPACT ASSESSMENT STUDY REPORT FOR PROPOSED SERVICED APARTMENTS ON PLOT L.R. NO. 209/21520 LOCATED ALONG SUSWA ROAD IN PARKLANDS AREA OF NAIROBI CITY COUNTY. This Environmental Impact Assessment (EIA) Study Report is submitted to the National Environment Management Authority (NEMA) in conformity with the requirements of the Environmental Management and Coordination Act, Cap 387 and the Environmental (Impact Assessment and Audit) Regulations, 2003 Project Proponent: Salsabil Heights Limited, P.O Box 25107 – 00603, Nairobi. The following expert(s) conducted the assessment and prepared this EIA Study Report Name of the Expert Designation Reg. No. Signature Solomon Kyeni Lead Expert 3081 Aaron Mumo Associate Expert 9047 Expert’s contacts: P.O. Box 157 - 00600, Nairobi. Tel: 0724043970 For and on behalf of: Salsabil Heights Limited, P.O Box 25107 – 00603, Nairobi. Signed: Date: Name………………................………………………………........................…………… Designation…………........................……………………….................…..............… i EIA Study Report for the Proposed Serviced Apartments in Parklands Area of Nairobi City County. TABLE OF CONTENTS Executive Summary ...................................................................................................................... vii Acronyms ...................................................................................................................................... xii CHAPTER ONE: INTRODUCTION ............................................................................................
    [Show full text]
  • International Conference on Mechanical Engineering Proceedings of the 11Th International Conference on Mechanical Engineering (ICME2015)
    @ Conference collection International Conference on Mechanical Engineering Proceedings of the 11th International Conference on Mechanical Engineering (ICME2015) Dhaka, Bangladesh 18-20 December 2015 Editors Mohammad Ali Md.Abdus Salam Akanda A K M Monjur Morshed Bangladesh University of Engineering and Technology, Dhaka, Bangladesh Sponsoring Organizations Bangla Trac Ltd. Khulna Power Company Ltd. NoorTrade Electronics Aridod Tech Serve Limited All papers have been peer reviewed. Melville, New York, 2016 AIP Conference Proceedings Volume 1754 To learn more about AIP Conference Proceedings visit http://proceedings.aip.org AIP Conference Proceedings, Volume 1754 International Conference on Mechanical Engineering Proceedings of the 11th International Conference on Mechanical Engineering (ICME 2015) Table of Contents Preface: 11th International Conference on Mechanical Engineering, ICME 2015 010001 KEYNOTE PAPERS Heat transfer in completely and partially filled spherical phase change thermal energy storage modules Muhammad Mustafizur Rahman 020001 Engineering education in 21st century Firoz Alam, Rashid Sarkar, Roger La Brooy, and Harun Chowdhury 020002 MECHANICS AND MATERIALS ENGINEERING Effect of variable physical properties on the thermal behavior of thin metallic wires under a DC field Avishek Kumar Dey, Abhishek Kumar Ghosh, and S. Reaz Ahmed 030001 Performance & stability analysis of a three lobe journal bearing with varying parameters: Experiments and analysis Nabarun Biswas, Prasun Chakraborti, Ankuran Saha, and Srijit Biswas 030002 Investigation of displacement, strain and stress in single step transversely isotropic elastic bonded joint Md. Jakaria Apu and Md. Shahidul Islam 030003 Temperature rise and wear of sliding contact of alloy steels Arindam Roy Goswami, Santanu Sardar, and Santanu Kumar Karmakar 030004 Properties of micro-nano particle size admixtures of alumina at different sintering condition Rahin Sifat, Manira Akter, and A.
    [Show full text]
  • Sludge Disintegration Techniques - Assessment of Their Impacts on the Solubilization of Organic Carbon and Methane Production
    Band 68 Schriftenreihe des Lehrstuhls für Wasserchemie und Wassertechnologie und der DVGW-Forschungsstelle am Engler-Bunte-Institut des Karlsruher Instituts für Technologie (KIT) Sludge disintegration techniques - assessment of their impacts on the solubilization of organic carbon and methane production Elham Fatoorehchi Herausgeber Harald Horn Karlsruhe 2016 Elham Fatoorehchi Sludge disintegration techniques - assessment of their impacts on solubilization of organic carbon and methane production Herausgeber: Harald Horn Band 68 Schriftenreihe des Lehrstuhls für Wasserchemie und Wassertechnologie und der DVGW- Forschungsstelle am Engler-Bunte-Institut des Karlsruher Instituts für Technologie (KIT) Karlsruhe 2016 ISSN: 2195-2973 Lehrstuhl für Wasserchemie und Wassertechnologie und DVGW-Forschungsstelle am Engler-Bunte-Institut des Karlsruher Instituts für Technologie (KIT) Engler-Bunte-Ring 9 D-76131 Karlsruhe Tel.: +49-(0)721-608-42581 Fax: +49-(0)721-608-46497 E-mail: [email protected] http://wasserchemie.ebi.kit.edu/ Titelbild: DOC chromatograms of sludge acquired with size exclusion chromatography Dieses Werk wird durch das deutsche Urheberrechtsgesetz und internationale Verträge urheberrechtlich geschützt. © 2016 Prof. Dr. H. Horn. Alle Rechte vorbehalten. All rights reserved. Sludge disintegration techniques - assessment of their impacts on solubilization of organic carbon and methane production zur Erlangung des akademischen Grades eines DOKTORS DER INGENIEURWISSENSCHAFTEN (Dr.-Ing.) der Fakultät für Chemieingenieurwesen und Verfahrenstechnik des Karlsruher Instituts für Technologie (KIT) genehmigte DISSERTATION von M. Sc. Elham Fatoorehchi aus Tehran, Iran Referent: Prof. Dr. Harald Horn Korreferent: Prof. Dr. Marc Wichern Tag der mündlichen Prüfung: 27.09.2016 Abstract Anaerobic stabilization of excess sludge is the favored biological process in wastewater treatment with a capacity of more than 50000 people.
    [Show full text]
  • New Gourna Village Conservation and Communıty New Gourna Village: Conservation and Communıty
    New Gourna Village Conservation and Communıty New Gourna Village: Conservation and Communıty March 2011 Acknowledgements This assessment was undertaken by World Monuments Fund (WMF) with the support of the Robert W. Wilson Challenge to Conserve our Heritage, and in collaboration with the UNESCO World Heritage Centre and the Luxor Governorate of Egypt. The WMF Project Team that carried out the survey and compiled the assessment report included Erica Avrami (WMF Project Manager); Jeff Allen, Gina Haney, Heba Hosny, Eta’ El Hosseiny, and Sarah Badea (all of Community Consortium); and William Raynolds (WMF Consultant). An accompanying film was produced by WMF in collaboration with Community Consortium, directed by Oliver Wilkins and with interviews and translations by Mostafa Naguib. The film, Hassan Fathy’s New Gourna Village: Past, Present and Future, is available at http://www.wmf.org/project/new-gourna-village The UNESCO physical survey team (Mahmoud Qutb, Nevine George, Heba Hosny, and Dalia Magdy) kindly provided the base plan used in this report. The Aga Khan Trust for Culture kindly provided historic images for the assessment and the film. Photography for the report was by Community Consortium, with additional images provided by Mostafa Naguib, Erica Avrami/WMF, and Hubert Guillaud/CRAterre-ENSAG. Graphic design of this report was by Ken Feisel, WMF Art Director. Editorial assistance was provided by Maria Golia. Special thanks go to the residents of New Gourna, who opened their homes to the assessment team and shared their stories. Their interest and cooperation are a testament to Hassan Fathy’s vision for a thriving community and to the shared hope for its future.
    [Show full text]
  • The Academic Research Community Publication
    http://www.press.ierek.com ISSN (Print: 2537-0154, online: 2537-0162) International Journal on: The Academic Research Community Publication DOI: 10.21625/archive.v2i2.485 Scenic and Scientific Representation of Water in Mughal Architecture: A case study of ShahJahan’s Quadrangle Lahore Fort, Pakistan Saira Iqbal1 1Quaid e Azam University Islamabad, Pakistan Abstract Nothing is useless in this world. Everything has its specific purpose and objectives with respect to its importance. The present-day hardware and materials utilized as a part of building swallow noteworthy measure of our national vitality. Ancient monumental buildings and palaces are still a place to relax without fans, coolers and air con- ditioners. There is a need to study the traditional buildings because they are time-tested. Mughal Architects are legendary for their creativity. Without beauty, architecture would just be the combination and amalgamation of some material. Hence, art is the soul and spirit of architecture. Mughal Architecture is the example of “Feeling of Wonder” that is the source of aesthetic experience. Mughals showed the great skills in infusing the Islamic idea with local tradition. Water has had been an important element in Asian culture and architecture. Water is an architectural element that is extensively used in our ancient buildings and in the garden of the Mughals. Water not only pleases the eye on a hot summer day, but also provides passive cooling. This paper deals with the utilization of water not only for the purpose of beautification of the site but also for studying the scientific utility of water. This study is a mixture of basic and applied methods according to architectural research methods.
    [Show full text]
  • Epoxide Functional Γ-Al2o3/Fe3o4/Sio2 Ceramic Nanocomposite Particles As Adsorbent for Reactive Azo
    Preprints (www.preprints.org) | NOT PEER-REVIEWED | Posted: 11 July 2018 doi:10.20944/preprints201807.0205.v1 Epoxide Functional γ-Al2O3/Fe3O4/SiO2 Ceramic Nanocomposite Particles as Adsorbent for Reactive Azo Dye: Understanding Surface Property Sadia Salsabil Bristy1, Mohammad Mostafizar Rahman2, Mohammad Mahbubor Rahman1, Mohammad Ashraful Alam1, Mohammad Rabiul Karim1 and Hasan Ahmad1,* 1 Department of Chemistry, Rajshahi University, Rajshahi 6205, Bangladesh 2 Berger Paints Bangladesh Ltd., Dhaka Factory, Nabinagar, Savar, Dhaka 1340, Bangladesh Correspondence: [email protected]; Tel: +88-0721-711107 ORCID Hasan Ahmad: 0000-0003-1499-167X 1 © 2018 by the author(s). Distributed under a Creative Commons CC BY license. Preprints (www.preprints.org) | NOT PEER-REVIEWED | Posted: 11 July 2018 doi:10.20944/preprints201807.0205.v1 Abstract: In this investigation magnetic γ-Al2O3 ceramic nanocomposite particles bearing epoxide functionality are prepared following a multistep process. The ultimate nanocomposite particles are named as γ-Al2O3/Fe3O4/SiO2/poly(glycidyl methacrylate (PGMA). The surface property is evaluated by carrying out the adsorption study of Remazol navy (RN), a model reactive azo dye, on both γ-Al2O3/Fe3O4/SiO2 and γ-Al2O3/Fe3O4/SiO2/PGMA nanocomposite particles. The adsorption is carried out at the point of zero charge (PZC) to neutralize the effect of particle surface charge. The adsorption rate is very fast, reached equilibrium (qe) value within five min. Due to mesoporous structure of silica layer γ-Al2O3/Fe3O4/SiO2 nanocomposite particles possessed relatively higher specific surface area and magnitude of adsorption is dependent on the total specific surface area. The introduction of epoxide functionality favored high adsorption capacity in mass per unit surface area.
    [Show full text]
  • Cfd Evaluation of the Pottery Water Wall in Hot Arid Climate of Luxor, Egypt
    CFD EVALUATION OF THE POTTERY WATER WALL IN HOT ARID CLIMATE OF LUXOR, EGYPT BY MOUSTAFA ANWAR MOUSTAFA MOHAMED ISMAIL A thesis submitted in fulfilment of the requirement for the degree of Master of Science in Built Environment Kulliyyah of Architecture and Environmental Design International Islamic University Malaysia JULY 2013 ABSTRACT The research is an attempt to improve the existing water wall by means of experimenting the humidity and temperature levels improvement caused by the pottery water wall. This study aims to evaluate the pottery water wall in hot arid climate specifically Luxor, Egypt using ANSYS Fluent for Computational Fluid Dynamics CFD simulation. The pottery water wall is a passive system in which the concept has been patented by the author at the Egyptian Patent Office. The pottery water wall is a combination of a water wall and porous ceramic pipes for evaporative cooling. It is regarded as an improvised version of the water wall. The study evaluates the efficiency of the pottery water wall in cooling and heating. The study compares between its designs, aiming to decipher the most efficient design of the pottery water wall, by simulating four different models on a room with a volume of 75m3 with three different opening sizes, porous ceramic pipes and surface areas as variances. The most efficient model of the pottery water wall derived from the first simulation will be evaluated for thermal comfort in the worst climatic conditions in Luxor, Egypt. The findings showed that the highest efficiency of the pottery water wall was achieved while using a moderate sized opening (900mm x 900mm), while its efficiency decreases if the opening size of 900mm by 900mm is made smaller or bigger.
    [Show full text]
  • Simulation Influence of Compressor 3 Pressure and Cyclone Pressure on Specific Energy Consumption and Cooling Heat in Renewable Desalination
    Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 81, Issue 2 (2021) 59-66 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences Journal homepage: www.akademiabaru.com/arfmts.html ISSN: 2289-7879 Simulation Influence of Compressor 3 Pressure and Cyclone Pressure on Specific Energy Consumption and Cooling Heat In Renewable Desalination Engkos Achmad Kosasih1,*, Muhammad Irfan Dzaky1, Ahmad Zikri1, Ahmad Fadhil Nugraha1 1 Department of Mechanical Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok 16424, West Java, Indonesia ARTICLE INFO ABSTRACT Article history: The problem of freshwater is an issue that has been hot for discussion for decades. The Received 13 December 2020 number of industries and the increasing population in the world has caused the need Received in revised form 10 March 2021 for clean water to increase drastically. This scarcity occurs because 97.7% of the water Accepted 15 March 2021 available on earth contains salt. Only 2.3% contains no salt, and 99.5% of the amount Available online 22 March 2021 is ice, groundwater, and the atmosphere. With a large percentage of seawater, water needs for human survival can be met by using the desalination method. In this study using a throttling valve and utilizing cold water (secondary product) as a refrigerant to cool the room. This research will also discuss how specific energy consumption and cooling heat are affected by compressor pressure and cyclone pressure to prove how capable and efficient the renewable desalination method is in producing aquadest water, which is expected to help water availability to meet water needs.
    [Show full text]
  • Download 1 File
    ARCHITECTURE: COMFORT AND ENERGY This Page Intentionally Left Blank ARCHITECTURE: COMFORT AND ENERGY Editors C. Gallo, M. Sala, A.A.M. Sayigh 1988 ELSEVIER Amsterdam - Lausanne - New York - Oxford - Shannon - Singapore - Tokyo Published originally as a special issue (Volume 2:1/2) of the journal Renewable and Sustainable Energy Reviews and also available in hard-bound edition (ISBN 0-080-43004-X) ELSEVIER SCIENCE Ltd The Boulevard, Langford Lane Kidlington, Oxford OX5 1GB, UK © 1998 Elsevier Science Ltd. All rights reserved. This work and the individual contributions contained in it are protected under copyright by Elsevier Science Ltd, and the follow- ing terms and conditions apply to their use: Photocopying Single photocopies of single chapters may be made for personal use as allowed by national copyright laws. Permission of the publisher and payment of a fee is required for all other photocopying, including multiple or systematic copying, copying for advertising or promotional purposes, resale, and all forms of document delivery. Special rates are available for educational institutions that wish to make photocopies for non-profit educational classroom use. Permissions may be sought directly from Elsevier Science Rights & Permissions Department, PO Box 800, Oxford OX5 1DX, UK; phone: (+44) 1865 843830, fax: (+44) 1865 853333, e-mail: [email protected]. You may also contact Rights & Permissions directly through Elsevier's home page (http://www.elsevier.nl), selecting first 'Customer Support', then 'General Information', then 'Permissions Query Form'. In the USA, users may clear permissions and make payments through the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, USA; phone: (978) 7508400, fax: (978) 7504744, and in the UK through the Copyright Licensing Agency Rapid Clearance Service (CLARCS), 90 Tottenham Court Road, London WIP OLP, UK; phone: (+44) 171 436 5931; fax: (+44) 171 436 3986.
    [Show full text]
  • Assessment of Passive Downdraft Evaporative Cooling Technique for Environmental Sustainability in Buildings
    Int'l Journal of Research in Chemical, Metallurgical and Civil Engg. (IJRCMCE) Vol. 3, Issue 2 (2016) ISSN 2349-1442 EISSN 2349-1450 Assessment of Passive Downdraft Evaporative Cooling Technique for Environmental Sustainability in Buildings Mohammad Arif Kamal microscopic water droplets into hot, dry ambient air, thereby Abstract—There has been a drastic increase in the use of air causing it to cool and descend into a required capture zone conditioning system for cooling the buildings all around the world. within a building. From here the cool air enters the adjacent Interest on reducing emission of greenhouse gases, caused by fossil occupied spaces through carefully sized and controlled fuels to power the cooling requirements of the buildings has openings. With PDEC cooling process, the air temperature stimulated the interest towards adoption of passive cooling techniques for buildings. Passive downdraught evaporative cooling may be reduced by 70-80% of the wet-bulb temperature (PDEC) is a passive cooling technique which involves spraying of depression, providing the potential for very significant controlled volumes of microscopic water droplets into hot, dry cooling in hot dry climatic regions. ambient air, thereby causing it to cool and descend into a required capture zone within a building. This paper provides a study of II. COOLING NEEDS OF BUILDINGS AND SUSTAINABILITY IN Passive Downdraught Evaporative Cooling (PDEC) as a passive ARCHITECTURE cooling technique for providing thermal comfort and its significance in energy conservation in buildings has been done. The According to the International Institute of Refrigeration interrelationship between sustainability and cooling needs of (IIR), there are more than 240 million air conditioning units buildings has also been discussed.
    [Show full text]
  • When and Why Is Pre-Treatment of Substrates for Anaerobic Digestion Useful?
    DOCTORAL T H E SIS Department of Civil, Environmental and Natural Resources Engineering My Carlsson Waste Science and Technology When and why is Pre-Treatment of ISSN 1402-1544 ISBN 978-91-7583-376-7 (print) Substrates for Anaerobic Digestion Useful? ISBN 978-91-7583-377-4 (pdf) Digestion Useful? Anaerobic of Substrates for is Pre-Treatment When and why Luleå University of Technology 2015 My Carlsson When and why is Pre-Treatment of Substrates for Anaerobic Digestion Useful? My Carlsson Luleå University of Technology Department of Civil, Environmental and Natural Resources Engineering Waste Science and Technology Printed by Luleå University of Technology, Graphic Production 2015 ISSN 1402-1544 ISBN 978-91-7583-376-7 (print) ISBN 978-91-7583-377-4 (pdf) Luleå 2015 www.ltu.se Ingenting försvinner, allt finns kvar! Tippen, SVT, 1993 Abstract Anaerobic digestion (AD) plays a key role in the recovery of renewable energy, in the form of biogas, and nutrients from waste materials. Pre-treatment of AD substrates has the potential to improve process performance in terms of increased methane yield and solids reduction, but pre- treatments are not yet widely implemented into full-scale AD systems. The aims of this thesis were to identify conditions that determine when pre-treatment has a positive impact on an AD system and ways to improve the practical utility of pre-treatment impact assessment. Key steps towards meeting these aims were to determine and critically analyse effects of pre-treatments on AD, and current evaluation schemes at three levels: AD substrate level – Direct effects on the substrate’s chemical and physical characteristics and its biodegradability/bioavailability; Local AD system level – Effects of pre-treatment on the AD process and its outputs, required inputs and (local) upstream and downstream processes.
    [Show full text]