International Conference on Mechanical Engineering Proceedings of the 11Th International Conference on Mechanical Engineering (ICME2015)

@ Conference collection

International Conference on Mechanical Engineering Proceedings of the 11th International Conference on Mechanical Engineering (ICME2015)

Dhaka, Bangladesh 18-20 December 2015

Editors

Mohammad Ali

Md.Abdus Salam Akanda A K M Monjur Morshed Bangladesh University of Engineering and Technology, Dhaka, Bangladesh

Sponsoring Organizations Bangla Trac Ltd. Khulna Power Company Ltd. NoorTrade Electronics Aridod Tech Serve Limited

All papers have been peer reviewed.

Melville, New York, 2016 AIP Conference Proceedings Volume 1754

To learn more about AIP Conference Proceedings visit http://proceedings.aip.org AIP Conference Proceedings, Volume 1754 International Conference on Mechanical Engineering Proceedings of the 11th International Conference on Mechanical Engineering (ICME 2015)

Table of Contents

Preface: 11th International Conference on Mechanical Engineering, ICME 2015 010001

KEYNOTE PAPERS

Heat transfer in completely and partially filled spherical phase change thermal energy storage modules Muhammad Mustafizur Rahman 020001

Engineering education in 21st century Firoz Alam, Rashid Sarkar, Roger La Brooy, and Harun Chowdhury 020002

MECHANICS AND MATERIALS ENGINEERING

Effect of variable physical properties on the thermal behavior of thin metallic wires

under a DC field Avishek Kumar Dey, Abhishek Kumar Ghosh, and S. Reaz Ahmed 030001

Performance & stability analysis of a three lobe journal bearing with varying parameters: Experiments and analysis Nabarun Biswas, Prasun Chakraborti, Ankuran Saha, and Srijit Biswas 030002

Investigation of displacement, strain and stress in single step transversely isotropic elastic bonded joint Md. Jakaria Apu and Md. Shahidul Islam 030003

Temperature rise and wear of sliding contact of alloy steels Arindam Roy Goswami, Santanu Sardar, and Santanu Kumar Karmakar 030004

Properties of micro-nano particle size admixtures of alumina at different sintering condition Rahin Sifat, Manira Akter, and A. K. M. Bazlur Rashid 030005

Microstructure evolution and electrical characterization of Lanthanum doped Barium Titanate (BaTi03) ceramics Masum Billah, A. Ahmed, Md. Miftaur Rahman, Rubbayat Mahbub, M. A. Gafur, and M. Shahriar Bashar 030006

An approximate solution to the stress and deformation states of functionally graded rotating disks Lakshman Sondhi, Shubhashis Sanyal, Kashi Nath Saha, and Shubhankar Bhowmick 030007

Studies on tensile properties and fracture behavior of Al-6Si-0.5Mg (-Cu or/and Ni) alloys

at various strain rates A. Hossain, F. Gulshan, and A. S. W. Kurny 030008 Effect of temperature and geometric parameters on elastic properties of tungsten nanowire: A molecular dynamics study Sourav Saha, Satyajit Mojumder, Monon Mahboob, and M. Zahabul Islam 030009

In vivo measurement of mechanical properties of human long bone by using sonic sound M. Jayed Hossain, M. Moshiur Rahman, and Morshed Alam 030010

Micromechanics model for predicting anisotropic electrical conductivity of carbon fiber composite materials Mohammad Faisal Haider, Md. Mushfique Haider, and Farzana Yasmeen 030011

Analysis of a hybrid balanced laminate as a structural material for thick composite beams with axial stiffeners

Partha Modak, M. Jamil Hossain, and S. Reaz Ahmed 030012

Score-stove Performance with modified resonating tube shape and layouts Md. M. Hossain, M. I. Malek, Md. Ehsan, and R H. Riley 030013

Constitutive modeling of the human Anterior Cruciate Ligament (ACL) under uniaxial loading

using viscoelastic prony series and hyperelastic five parameter Mooney-Rivlin model Souvik Chakraborty, Debabrata Mondal, and Mohammad Motalab 030014

Antiloosening ability of 5/8 inch stainless steel BSW threaded fasteners Bikash Panja and Santanu Das 030015

Analysis of an off road 4WD vehicle's suspension system modification - Case study of aftermarket suspension lift and modification of wheel track size J. Ross, M. A. Hazrat, and M. G. Rasul 030016

FLUIDS ENGINEERING Physiological non-Newtonian blood flow through single stenosed artery Khairuzzaman Mamun, Mohammad Matiur Rahman, Most. Nasrin Akhter, and Mohammad Ali 040001

Unsteady laminar flow with convective heat transfer through a rotating curved square duct

with small curvature

Rabindra Nath Mondal, Titob Roy, Poly Rani Shaha, and Shinichiro Yanase 040002

On the onset of secondary flow and unsteady solutions through a loosely coiled rectangular duct for large aspect ratio Poly Rani Shaha, Sajal Kanti Rudro, Nayan Kumar Poddar, and Rabindra Nath Mondal 040003

Enhanced heat sink with geometry induced wall-jet Md. Mahamudul Hossain, Amitav Tikadar, Fazlul Bari, and A. K. M. M. Morshed 040004

Analysis of pressure distributions on combinations of cylinders due to the effect of wind loading Kapil Ghosh, Anup Saha, Md. Quamrul Islam, and Mohammad Ali 040005 MHD Couette flow of viscous incompressible fluid with Hall current and suction Afroja Parvin, Tanni Alam Dola, and Md. Mahmud Alam

Soret and Dufour effects on MHD viscoelastic fluid flow through a vertical flat plate with constant suction

Sheikh Imamul Hossain and Md. Mahmud Alam

Effect of angle of attack on an optimized vortex induced vibrated energy harvester: A numerical approach Md. Rejaul Haque, M. Arshad Zahangir Chowdhury, and Anjan Goswami

Study the effect of chemical reaction and variable viscosity on free convection MHD radiating flow over an inclined plate bounded by porous medium M. Ali, M. A. Alim, R. Nasrin, and M. S. Alam

Experimental and computational analysis of pressure response in a multiphase flow loop Munzarin Morshed, Al Amin, Mohammad Azizur Rahman, and Syed Imtiaz

Prediction of ship resistance in head waves using RANS based solver Hafizul Islam and Hiromichi Akimoto

The effect of solidity on the performance of H-rotor Darrieus turbine S. M. Rakibul Hassan, Mohammad Ali, and Md. Quamrul Islam

Effects of non Newtonian spiral blood flow through arterial stenosis Md. Mahmudul Hasan, Mahbub Alam Maruf, and Mohammad Ali

Investigation of drag reduction through a flapping mechanism on circular cylinder Md. Asafuddoula Asif, Avijit Das Gupta, M. D. Juwel Rana, and Dewan Hasan Ahmed

Mixed convection analysis in lid-driven cavity with sinusoidally curved bottom wall using CNT-water nanofluid

Mohieminul Islam Khan, Khan Md. Rabbi, Saadbin Khan, and M. A. H. Mamun

Numerical analysis of mixed convection in lid-driven cavity using non-Newtonian ferrofluid with rotating cylinder inside Khan Md. Rabbi, Moinuddin Shuvo, Rabiul Hasan Kabir, Satyajit Mojumder, and Sourav Saha

Comparison of aerodynamic characteristics of pentagonal and hexagonal shaped bridge decks Md. Naimul Haque, Hiroshi Katsuchi, Hitoshi Yamada, and Mayuko Nishio

An experimental investigation of wind flow over tall towers in staggered form Proma Anwar, Md. Quamrul Islam, and Mohammad Ali

Molecular dynamics study on the effect of boundary heating rate on the phase change characteristics of thin film liquid Mohammad Nasim Hasan, A. K. M. Monjur Morshed, Kazi Fazle Rabbi, and Mominul Haque Turbulent flow analysis on bend and downstream of the bend for different curvature ratio Rana Roy Chowdhury, Suranjan Biswas, Md. Mahbubul Alam, and A. K. M. Sadrul Islam

Natural convection of non-Newtonian fluid along a vertical thin cylinder using modified power-law model Sharaban Thohura, Md. Mamun Molla, and M. M. A. Sarker

A numerical study of magneto-hydrodynamic free convection in a square cavity with heated elliptic block M. Jahirul Haque Munshi, M. A. Alim, and A. H. Bhuiyan

Natural convection inside a porous trapezoidal enclosure with wavy top surface Sehrina Muzahid Eshon, Rakib Mustafa, and Mohammad Nasim Hasan

A computational study on oblique shock wave-turbulent boundary layer interaction Md. Saddam Hossain Joy, Saeedur Rahman, A. B. M. Toufique Hasan, M. Ali, Y. Mitsutake, S. Matsuo, and T. Setoguchi

Effect of cavity on shock oscillation in transonic flow over RAE2822 supercritical airfoil M. Rizwanur Rahman, Md. Itmam Labib, A. B. M. Toufique Hasan, M. Ali, Y. Mitsutake, and T. Setoguchi

Analysis of viscous micropump with single rotating cylinder Md. Nur Alam Mondal, Md. Shafiqul Islam, A. B. M. Toufique Hasan, and Y. Mitsutake

Effects of flow properties on the performance of a diffuser-nozzle element of a valveless micropump Partha Kumar Das and A. B. M. Toufique Hasan

Numerical analysis of bio-inspired corrugated airfoil at low Reynolds number Partha Protim Mondal, Md. Masudur Rahman, and A. B. M. Toufique Hasan

CFD modeling of pulsatile hemodynamics in the total cavopulmonary connection S. M. Tareq Zobaer and A. B. M. Toufique Hasan

Simulation of sliding of liquid droplets Saif Khan Alen, Nazia Farhat, and Md. Ashiqur Rahman

Computational analysis of asymmetric water entry of wedge and ship section at constant velocity Md. Mashiur Rahaman, Al Habib Ullah, Laboni Afroz, Sharmin Shabnam, and M. A. Rashid Sarkar

HEAT TRANSFER AND THERMAL ENGINEERING

Heat line analysis for MHD mixed convection flow of nanofluid within a driven cavity containing heat generating block Salma Parvin and Ayesha Siddiqua

Experimental study on the performance characteristics and emission analysis of a diesel engine using vegetable oils Anup Saha, Ekramul Haque Ehite, and M. M. Alam A computational study of radiation and gravity effect on temperature and soot formation in a methane air co-flow diffusion flame Arup Jyoti Bhowal and Bijan Kumar Mandal

Natural convective heat and mass transfer in a porous triangular enclosure filled with nanofluid in presence of heat generation Raju Chowdhury, Salma Parvin, and Md. Abdul Hakim Khan

Effect of compression ratio on the performance, combustion and emission from a diesel engine using palm biodiesel Ambarish Datta and Bijan Kumar Mandal

Numerical investigation on the effects of EGR on CI engine characteristics using soyabean biodiesel Ambarish Datta and Bijan Kumar Mandal

Numerical investigation of thermal performance of a water-cooled mini-channel heat sink for different chip arrangement Amitav Tikadar, Md. Mahamudul Hossain, and A. K. M. M. Morshed

Simulated performance of biomass gasification based combined power and refrigeration plant for community scale application S. Chattopadhyay, P. Mondal, and S. Ghosh

Performance analysis of a bio-gasification based combined cycle power plant employing indirectly heated humid air turbine S. Mukherjee, P. Mondal, and S. Ghosh

3-Dimensional numerical study of cooling performance of a heat sink with air-water flow through mini-channel Sambit Majumder, Abhik Majumder, and Swapan Bhaumik

Effect of filling ratio and orientation on the thermal performance of closed loop pulsating heat pipe using ethanol Md. Lutfor Rahman, Mehrin Chowdhury, Nawshad Arslan Islam, Sayed Muhammad Mufti, and Mohammad AH

An experimental study on the performance of closed loop pulsating heat pipe (CLPHP) with methanol as a working fluid Md. Lutfor Rahman, Farah Nazifa Nourin, Zaimaa Salsabil, Nusrat Yasmin, and Mohammad Ali

Experimental investigation on thermal performance of a closed loop pulsating heat pipe (CLPHP) using methanol and distilled water at different filling ratios Md. Lutfor Rahman, Anindita Dhar Swarna, Syed Nasif Uddin Ahmed, Sanjida Perven, and Mohammad Ali

Effect of using ethanol and methanol on thermal performance of a closed loop pulsating heat pipe (CLPHP) with different filling ratios Md. Lutfor Rahman, Zaimaa Salsabil, Nusrat Yasmin, Farah Nazifa Nourin, and Mohammad Ali Effect of using acetone and distilled water on the performance of open loop pulsating heat pipe (OLPHP) with different filling ratios Md. Lutfor Rahman, Tonima Afrose, Halima Khatun Tahmina, Rumana Parvin Rinky, and Mohammad Ali

Natural convection flow in porous enclosure with localized heating from below with heat flux Md. Noor-A-Alam Siddiki, Md. Mamun Molla, and Suvash C. Saha

Mixed convection flow of nanofluid in a square enclosure with an intruded rectangular fin Ran Cong, Xuanyu Zhou, Bruno De Souza Machado, and Prodip K. Das

Natural convection flow of Cu-H20 nanofluid along a vertical wavy surface with uniform heat flux Farjana Habiba, Md. Mamun Molla, and M. A. Hakim Khan

Numerical investigation of natural convection of nanoparticle enhanced ionic liquids (NEILs) in enclosure heated from below

Titan C. Paul, A. K. M. M. Morshed, and Jamil A. Khan

MHD mixed convection flow through a diverging channel with heated circular obstacle Md. S. Alam, J. Shaha, M. A. H. Khan, and R. Nasrin

A molecular dynamics study of thermal transport in nanoparticle doped Argon like solid Muhammad Rubayat Bin Shahadat, Shafkat Ahmed, and A. K. M. M. Morshed

Large-eddy simulation of airflow and heat transfer in a general ward of hospital Md. Farhad Hasan, Taasnim Ahmed Himika, and Md. Mamun Molla

Turbulent combined-convection boundary layer with aiding flows along a heated vertical flat plate at higher freestream velocity Mohammad Zoynal Abedina, Mohammed Moinul Islam, Md. Abu Hanif, and Md. Jahangir Alam

Reduced thermal conductivity of a nanoparticle decorated nanowire: A non-equilibrium molecular dynamics study Ahmed Shafkat Masnoon, Ferdaushi Alam Bipasha, and A. K. M. M. Morshed

Thermal comfort analysis: A case study of LIG housing in Chhattisgarh Nisha Netam, Shubhashis Sanyal, and Shubhankar Bhowmick

A CFD model for biomass combustion in a packed bed furnace Md. Rezwanul Karim, Ifat Rabbil Qudrat Ovi, and Jamal Naser

The effect of mass recovery adsorption cooling cycle to optimize the collector number and time allocation

K. M. Ariful Kabir, K. C. Amanul Alam, Rifat A. Rouf, and M. M. A. Sarker

Effect of swirl flow on heat transfer characteristics in a circular pipe Hossain Siddique, Md. Shafkat Bin Hoque, and Mohammad Ali

Transient natural convection in a valley shaped triangular cavity initially filled with stratified water Sidhartha Bhowmick, Feng Xu, and Suvash C. Saha MHD mixed convection analysis in an open channel by obstructed Poiseuille flow of non-Newtonian power law fluid Khan Md. Rabbi, Tawfiqur Rakib, Sourav Das, Satyajit Mojumder, and Sourav Saha

Effect of first and second generation biodiesel blends on engine performance and emission A. K. Azad, M. G. Rasul, M. M. K. Bhuiya, and Rubayat Islam

MHD natural convection flow along a vertical wavy surface with heat generation and pressure work M. A. Alim, K. H. Kabir, and L. S. Andallah

Atomistic modelling of evaporation and explosive boiling of thin film liquid argon over internally recessed nanostructured surface Mohammad Nasim Hasan, Sheikh Mohammad Shavik, Kazi Fazle Rabbi, and Mominul Haque

Evaporation characteristics of thin film liquid argon in nano-scale confinement: A molecular dynamics study Mohammad Nasim Hasan, Sheikh Mohammad Shavik, Kazi Fazle Rabbi, and Mominul Haque

Mixed convection heat transfer inside a differentially heated square enclosure in presence of a rotating heat conducting cylinder Muntasir Alam, Kamruzzaman, Faraz Ahsan, and Mohammad Nasim Hasan

Numerical study of mixed convection heat transfer from a rotating cylinder inside a trapezoidal enclosure

Mohammed Khan, Arham Amin Khan, and Mohammad Nasim Hasan

Prediction of condensation heat transfer of low GWP refrigerants inside smooth horizontal tube Md. Anowar Hossain, Hasan M. M. Afroz, Shaon Talukder, and Akio Miyara

Study of combustion and emission characteristics of fuel derived from waste plastics by various waste to energy (W-t-E) conversion processes M. A. Hazrat, M. G. Rasul, and M. M. K. Khan

Numerical study of mixed convection heat transfer in an inclined rectangular channel with extruding discrete multiple heaters Araf Al Rafi, Md. Tanvir Akhtar Tonmoy, and Mohammad Nasim Hasan

A concentrated solar cavity absorber with direct heat transfer through recirculating metallic particles M. R. I. Sarker, Manabendra Saha, and R. A. Beg

Vibration energy harvesting in a small channel fluid flow using piezoelectric transducer Md. Mehedi Hassan, Md. Yearn Hossain, Rakib Mazumder, Roussel Rahman, and Md. Ashiqur Rahman

Modelling of frost formation and growth on microstuctured surface Md. Ali Muntaha, Md. Mushfique Haider, and Md. Ashiqur Rahman Analytical modeling of wetting states and simulation of drop shape on microstructured surfaces Saif Khan Alen, Nazia Farhat, and Md. Ashiqur Rahman

Fuel properties and engine performance of biodiesel from waste cooking oil collected in Dhaka city R. B. Islam, R. Islam, M. N. Uddin, and Md. Ehsan

Simulation of reflooding on two parallel heated channel by TRACE Md. Ghulam Zakir

Effect of process parameters on hardness, temperature profile and solidification of different layers processed by direct metal laser sintering (DMLS) Sazzad Hossain Ahmed, Ahsan Mian, and Raghavan Srinivasan

Analysis of entropy generation for double diffusive MHD convection in a square cavity with isothermal hollow cylinder Satyajit Mojumder, Sourav Saha, and Sumon Saha

Regulation of flow through a 7-Shaped open cavity by temperature dependent P, PI, and PID controllers Sourav Saha, Satyajit Mojumder, and Sumon Saha

Onset of transition from laminar to chaos in MHD mixed convection of a lid-driven trapezoidal cavity filled with Cw-water nanofluid Mohammad Azam, Md. Hasanuzzaman, and Sumon Saha

Effect of Reynolds and Grashof numbers on mixed convection inside a lid-driven square cavity filled with water-/4/203 nanofluid Md. Shah Jaman, Showmic Islam, Sumon Saha, Mohammad Nasim Hasan, and Md. Quamrul Islam