News Release September 27, 2018 No
Total Page:16
File Type:pdf, Size:1020Kb
News Release September 27, 2018 No. 70/18 World premiere: Exclusive new edition of the Porsche 935 Clubsport race car with 700 horsepower unveiled at Rennsport Reunion VI in California Atlanta, Georgia. Porsche has unveiled the new 935 race car on the occasion of “Rennsport Reunion VI” at WeatherTech Raceway Laguna Seca in California. Featuring a body reminiscent of the legendary Porsche 935/78, the 700-horsepower competition vehicle will be produced in a limited number of 77 units. “This spectacular car is a birthday present from Porsche Motorsport to fans all over the world,” says Dr. Frank-Steffen Walliser, Vice President Motorsport and GT Cars for Porsche AG. “Because the car isn’t homologated for any series, engineers and designers didn’t have to follow the usual rules and thus had freedom in the development.” The race car’s technology is geared towards clubsport events and private training on racetracks. It is based on the street-legal 911 GT2 RS high-performance sports car. Like its historic predecessor, most of the body has been replaced or supplemented by carbon- fiber reinforced polymer (CFRP) parts. With its streamlined extended rear, the new Porsche 935 measures 191.5 inches (4.87 meters) in length. The width of the exclusive clubsport race car is 80.1 inches (2.03 meters). The spectacular aerodynamics are a completely new development, and pay tribute to the Porsche 935/78 Le Mans race car, which fans dubbed “Moby Dick” due to its elongated shape, massive fairings, and white base color. The distinctive wheel arch air vents on the front fenders, which also are a feature of the Porsche 911 GT3 R customer racing vehicle, increase downforce at the front axle. Measuring 75.2 inches (1909 millimeters) in width by 15.8 inches (400 millimeters) in depth, the rear wing promotes aerodynamic balance. 1 of 7 Public Relations Department Brand Heritage Dave Engelman Phone +1.404.386.4665 [email protected] News Release September 27, 2018 No. 70/18 Many exterior details are a salute to successful vehicles from the company’s motor racing history: The aerodynamically enhanced rims echo those of the 935/78, with the LED rear lights on the rear wing endplates adopted from the 919 Hybrid LMP1 race car. The side mirrors come from the current Le Mans-winning 911 RSR, with the exposed titanium tailpipes modelled on those from the Porsche 908 from 1968. These historical references are also visible in the cockpit. The knob on the gearshift lever has a laminated wood design and is reminiscent of historic Porsche race cars such as the 917 and the 909 Bergspyder as well as the street-legal Carrera GT super sports car. The carbon fiber steering wheel and the color display behind it have been taken from the 2019 911 GT3 R. A massive safety cage combined with a racing bucket seat and a six-point safety harness help ensure maximum safety. A second seat for a passenger is available as an optional extra. Air conditioning keeps the interior cool. The new 935 is powered by a state-of-the-art 3.8-liter flat-six-twin-turbo engine, which is largely identical to the high-performance standard unit mounted in the road-legal 911 GT2 RS. Power is transferred to the 310 millimeter wide rear wheels via a seven-speed Porsche Doppelkupplung (PDK) dual-clutch transmission with rigid mounts. Just as in production models such as the 911 GT2 RS and GT3 RS, the driver changes gears via conveniently positioned shift paddles located on the steering wheel. Typical of the 911, the weight distribution ensures excellent traction and braking performance. Six-piston aluminum monobloc racing calipers on the front axle, in combination with internally ventilated and grooved iron brake discs with a 390-millimeter diameter, provide excellent braking performance. The rear axle is fitted with four-piston calipers and 355-millimeter discs. 2 of 7 Public Relations Department Brand Heritage Dave Engelman Phone +1.404.386.4665 [email protected] News Release September 27, 2018 No. 70/18 Like the road-legal 911 GT2 RS, the 3,042 pound (1,380 kilogram) 935 is equipped with PSM (Porsche Stability Management) including traction control as well as an anti-lock braking system (ABS). Thanks to a so-called map switch, these assistance systems can be adjusted separately or switched off completely, depending upon the track situation. The new Porsche 935 can be ordered now from 701,948 Euro plus country-specific VAT. In the U.S., this non-street-legal vehicle will be imported and sold by Porsche Motorsport North America of Carson, California. U.S. specific pricing will be announced at a later date. Customers will receive their vehicles from June 2019 at exclusive delivery events. Technical description Porsche 935 (Type 991, Gen. 2) Overview: Single-seater non-homologated, non-street-legal race car Basis: Porsche 911 GT2 RS (991.2) Weight/dimensions: Weight: ca. 3,042 pounds (1380 kg) Length: 191.5 inches (4865 mm) Width: 80 inches (2034 mm incl. side mirrors) Total height: 53.5 inches (1359 mm) Wheelbase: 96.7 inches (2457 mm) 3 of 7 Public Relations Department Brand Heritage Dave Engelman Phone +1.404.386.4665 [email protected] News Release September 27, 2018 No. 70/18 Engine: Water-cooled 6-cylinder aluminium twin-turbo rear-mounted boxer engine with rigid mounting; 3,800 cc; stroke 77.5 mm; bore 102 mm; ca. 700 horsepower 4- valve technology with VarioCam Plus camshaft adjustment and valve lift control Electronic engine management (Continental SDI 9) DMSB-approved 100-cell metal catalytic converter Rear muffler with twin tailpipes mounted centrally, Heritage Design Transmission: 7-speed PDK gearbox with rigid mounts and short paddle throws Dual mass flywheel Internal pressurized oil lubrication with active oil cooling Limited slip differential optimized for racing Bodywork: Weight-optimized bodyshell in aluminium-steel composite design with carbon-fiber Kevlar® add-on parts to improve aerodynamics and stability Rear wing with lights integrated in endplates Enlarged air inlets with integrated LED headlights in 4-point design Removable escape hatch in roof complying with FIA Art. 275a Aerodynamically optimized side mirrors 115-liter FT3 safety fuel cell with fuel cut-off safety valve in compliance with FIA Art. 253 in the front, optional with fast-fill coupling Welded-in safety cage Recaro® racing bucket seat with longitudinal seat adjustment and padding system in accordance with FIA Standard 8862/2009 4 of 7 Public Relations Department Brand Heritage Dave Engelman Phone +1.404.386.4665 [email protected] News Release September 27, 2018 No. 70/18 6-point safety harness Air jack system (three jacks) Fire extinguishing system with electronic release unit Suspension: Front axle: MacPherson suspension strut; forged suspension links, optimized stiffness with high-performance spherical bearings, center-lock wheel nuts; 3-way racing dampers, reinforced tie-rods; Electro-mechanical power steering with variable steering ratio; anti-roll bar Rear axle: Multi-link suspension; forged suspension links, optimized stiffness with high-performance spherical bearings, center-lock wheel nuts; 3-way racing dampers; anti-roll bar Brakes: Brake system: Two separate brake circuits for front and rear axles; adjustable via brake balance bar system Front axle: Six-piston aluminum monobloc racing brake calipers with anti-knock-back piston springs; iron brake discs, internally ventilated with 390 mm diameter, racing brake pads, optimized brake cooling ducts 5 of 7 Public Relations Department Brand Heritage Dave Engelman Phone +1.404.386.4665 [email protected] News Release September 27, 2018 No. 70/18 Rear axle: Four-piston aluminium monobloc racing brake calipers with anti-knock-back piston springs; iron brake discs, internally ventilated with 355 mm diameter, racing brake pads, optimized brake cooling ducts Electrical system: Instrument cluster consisting of COSWORTH™ ICD with integrated data logger, Sport Chrono watch and boost gauge in a vintage finish CFK multifunction steering wheel with pit speed limiter and quick-release coupling PSM (Porsche Stability Management) with ABS, Traction Control and Electronic Stability Control (can be completely switched off) Center console with map switch to adjust the ABS, ESC, TC and switch between preset tire circumferences Porsche Track Precision Race App Integrated lap trigger Lightweight 60 Ah lithium-ion (LiFePo) battery, leakproof, mounted in passenger footwell Emergency cut-off switch in cockpit and outside left of the windscreen Tire pressure monitoring system (TPMS) Air conditioning 6 of 7 Public Relations Department Brand Heritage Dave Engelman Phone +1.404.386.4665 [email protected] News Release September 27, 2018 No. 70/18 Rims/Tires: Front axle: One-piece light-alloy forged wheels 11.5J x 18 offset 15.3 with center-lock nut; Michelin® transport tires 29/65- R18 Rear axle: One-piece light-alloy forged wheels 13.0J x 18 offset -10 with center-lock nut; Michelin transport tires 31/71-R18 Color: Agate gray water-based paint; optional: Martini livery Vehicle price: 701,948 Euro plus country-specific VAT U.S.-specific pricing TBD Delivery from June 2019 ### About Porsche Motorsports North America, Inc. | 19800 South Main St., Carson, CA 90745 Porsche Motorsport North America (PMNA), founded in 1985, is the only authorized sales, parts and service provider in the United States and Canada for all purpose-built Porsche race cars such as the 911 GT3 R, 911 GT3 Cup and the Cayman GT4 Clubsport MR. PMNA also provides engine and transmission servicing, on-site race support and restoration services for historic Porsche race cars. PMNA’s nearly 30 employees are headquartered in 15,000 square feet of the Porsche Experience Center Los Angeles. Follow us: twitter.com/porsche | facebook.com/porsche Photos and video footage are available to accredited journalists on the Porsche Press Database at http://press.porsche.com/ 7 of 7 Public Relations Department Brand Heritage Dave Engelman Phone +1.404.386.4665 [email protected] .