Architecture in Steel Thermally-Broken Performance with Narrow Sight Lines

ARCHITECTURE IN STEEL THERMALLY-BROKEN PERFORMANCE WITH NARROW SIGHT LINES

Whether it’s the conversion of an industrial warehouse, a wide range of glass specification flexibility without a landmark building in a historic district or a tightly the need of special setup costs or profiles. Whether controlled University specification the combination of it is triple glazed, double glazed or combinations of glazing flexibility, energy performance and narrow thicker laminated glass & high performance glasses, thermally broken profiles is a unique combination. the flexibility is unique in the steel window industry.

The profile face features widths from 1” to 1 9/16”. Steel-Arte is also a superior solution for luxury The new cold rolled steel in combination with the glass residential applications. The strength of the Steel-Arte fibre-reinforced high performance composite thermal- coupled with the narrow profile design is a natural break results in minimal heat loss with superior strength for window walls where the mullions are small and and stability when compared to traditional hot rolled the minimal glass to glass dimension are critical profiles. The 2 3/8ths inch deep frame accommodates to the clean, crisp geometric look of the aesthetic.

www.dynamicwindows.com INDEX

Page OVERVIEW Steel-Arte Introduction 2 Why Choose Dynamic Steel? 4 Steel-Arte Glazing Flexibility 4 High Performance Dual or Triple Insulating Glass 4 Historic Authenticity with Lead Glass Overlay 5 NFRC Certified Glazing Performance 5 AAMA & ASTM Testing: Proven Window & Door Performance 5

WINDOW DETAILS OUTSWING Casement - Venting or fixed configurations 7 French Casement 8 Awning 10 Awning in Typical Window Wall 11 INSWING Casement - Venting or fixed configurations 13 French Casement 14 Hopper 16 Direct Glazed 17

DOOR DETAILS OUTSWING Steel-Arte Door 19 Stile & Rail Door 21 INSWING Steel-Arte Door 24 Stile & Rail Door 26

OPTIONS & ACCESSORIES Traditional Casement Profile - for Historic Appplications 29 Mullion Reinforcement Options 30 Radius Profiles 31 Drip Cap Options 32 Window Hardware Options 33 Glazing Stop Options 36

WINDOW WALL EXAMPLES S1 Glazing Stop Details 38 S3 Glazing Stop Details 50 Steel “L” Glazing Stop Details 56 Typical Installation Details 64

www.dynamicwindows.com WHY CHOOSE DYNAMIC STEEL?

Over the last 20 years Dynamic Architectural Windows & Doors has manufactured custom windows and doors for hundreds of the finest architecturally designed luxury homes and historical restorations in North America. It was only after repeated requests from our best architect and builder customers that Dynamic made the decision to add steel windows and doors to the manufacturing line up. Our customers provided us with a detailed wish list of what was needed in the steel window industry in North America.

Their steel wish list included the following:

· Narrow profiles that would meet the aesthetic · Third party tested window designs that meet design criteria of both the luxury residential and the evolving energy codes, complete with NFRC historical replacements markets. and AMMA testing.

· Thermally broken frames and sash that would · Optional third party structural engineering reduce the potential for room-side condensation services to provide an extra level of confidence (a repetitive problem with conventional non- in project specific design performance. thermally broken steel windows). · An industry leading business model with depend- · Window and door designs that accommodate a able & accurate lead time estimates, concise wide range of double and triple glazed options, communication, timely turnaround of shop to meet each unique project requirement. drawings and clearly defined expectations in all aspects of the window designing and manufacturing process. Dynamic is known for the ability to meet the expectations of this demanding niche.

STEEL-ARTE GLAZING FLEXIBILITY HIGH PERFORMANCE DUAL OR TRIPLE INSULATING GLASS Narrow sightlines, superior strength and unmatched durability have long been the attractive design components of using steel windows & doors, but these The 1 3/4” overall glazing cavity accommodates an unlim- attributes have been often overshadowed by the ited combination of high performance glass types, thick- potential of condensation and poor thermal efficiency. nesses and spacer bar materials. Whether it’s thermal performance, sound abatement, security or a combination Dynamic Steel-Arte introduces a unique solution to these of performance objectives the flexibility is available to design concerns with thermally broken frame & sash meet the most stringent performance specifications. components coupled with unmatched glazing flexibility.

The glazing flexibility is an important component of a steel window or doors overall performance. The oversized glazing cavity of the Steel-Arte thermally broken frame & sash allows facilitates glass thicknesses up to 1 3⁄4 inches.

www.dynamicwindows.com Back to Index - 4 HISTORIC AUTHENTICITY WITH LEAD GLASS OVERLAY

The use of applied lead or zinc overlays is a proven technique for replicating the appearance of true leaded glass without the expense and performance issues associated with traditional metal caming or leaded glass.

Dynamic takes Lead Glass Overlay to a higher level by applying the lead or zinc to the exterior and room side of the insulating glass and includes a metal spacer between the two insulating glass surfaces. The internal grid appearance is authentic and when coupled with warm edge spacer bars, argon gas, and a variety of low E coatings; the final performance will meet any of today’s stringent NFRC CERTIFIED GLAZING energy codes. PERFORMANCE Available in a selection of widths and patina colors, the use of Lead or Zinc Glass Overlay with an internal grid is an excellent solution for both historical replacements Dynamic Steel-Arte is one of the few steel windows or luxury residential homes where a narrow muntin is & doors on the market today that are tested and important. certified to the NFRC (National Fenestration Rating Council) performance standards. In many areas of the country the state and local building codes are requiring verifiable glazing performance using the NFRC certified labels on each product.

AAMA & ASTM TESTING: PROVEN WINDOW & DOOR PERFORMANCE

In addition to the complete range of European performance testing completed by our Swiss partner at the time of initial design, Dynamic Steel-Arte windows and doors have also independently lab tested for Air, Water, and Structural performance using the recognized North American standard AAMA / WDMA / CSA / 101 / IS2 / A440.

www.dynamicwindows.com Back to Index - 5 WINDOW ELEVATIONS

Outswing Casement Outswing French Casement Outswing Awning

Venting or fixed configurations

Inswing Casement Inswing French Casement

Venting or fixed configurations

Outswing Awning in Window Wall

SECTIONAL DETAILS FOR EACH DESIGN IS INCLUDED IN THIS OVERVIEW. THESE ARE THE STANDARD DETAILS. FOR ADDITIONAL DESIGN FLEXIBILITY QUESTIONS CALL THE DYNAMIC SALES TEAM AT 1.800.661.8111

Direct Glazed Inswing Hopper

www.dynamicwindows.com Back to Index - 6 1

OUTSWING CASEMENT 3 MAX. VENTING DIMENSIONS: 31 1/2 “ X 63” CONFIGURATION: VENTING OR FIXED 2

OUTSWING CASEMENT L profile Z profile h profile 1 HEAD DETAILS

2 SILL DETAILS

3 JAMB DETAILS

www.dynamicwindows.com Back to Index - 7 1

4 OUTSWING FRENCH CASEMENT MAX. DIMENSIONS: 63“ X 63” 3 2

OUTSWING FRENCH CASEMENT L profile Z profile h profile 1 HEAD DETAILS

2 SILL DETAILS

3 JAMB DETAILS

www.dynamicwindows.com Back to Index - 8 1

4 OUTSWING FRENCH CASEMENT MAX. DIMENSIONS: 63“ X 63” 3 2

OUTSWING FRENCH CASEMENT L profile Z profile h profile 4 MEETING STILE DETAILS

www.dynamicwindows.com Back to Index - 9 1

OUTSWING AWNING 3 MAX. DIMENSIONS: 63” x 31 1/2“ 2

OUTSWING AWNING L profile Z profile h profile 1 HEAD DETAILS

2 SILL DETAILS

3 JAMB DETAILS

www.dynamicwindows.com Back to Index - 10 1 4 OUTSWING AWNING IN WINDOW WALL 3 MAX. DIMENSIONS (AWNING): 63” x 31 1/2“ 2

OUTSWING AWNING IN WINDOW WALL L profile Z profile h profile 1 AWNING HEAD DETAIL

2 AWNING SILL DETAIL

3 AWNING JAMB DETAIL

www.dynamicwindows.com Back to Index - 11 1 4 OUTSWING AWNING IN WINDOW WALL 3 MAX. DIMENSIONS (AWNING): 63” x 31 1/2“ 2

OUTSWING AWNING IN WINDOW WALL L profile Z profile h profile 4 OUTSIDE JAMB DETAILS

www.dynamicwindows.com Back to Index - 12 1

INSWING CASEMENT MAX. VENTING DIMENSIONS: 31 1/2 “ X 63” 3 CONFIGURATION: VENTING OR FIXED 2

INSWING CASEMENT L profile Z profile h profile 1 HEAD DETAILS

2 SILL DETAILS

3 JAMB DETAILS

www.dynamicwindows.com Back to Index - 13 1

4 INSWING FRENCH CASEMENT MAX. DIMENSIONS: 63“ X 63” 3 2

INSWING FRENCH CASEMENT L profile Z profile h profile 1 HEAD DETAILS

2 SILL DETAILS

3 JAMB DETAILS

www.dynamicwindows.com Back to Index - 14 1

4 INSWING FRENCH CASEMENT MAX. DIMENSIONS: 63“ X 63” 3 2

INSWING FRENCH CASEMENT L profile Z profile h profile 4 MEETING STILE DETAILS

www.dynamicwindows.com Back to Index - 15 1

INSWING HOPPER MAX. DIMENSIONS: 63“ X 31 1/2” 3 2

INSWING HOPPER L profile Z profile h profile 1 HEAD DETAILS

2 SILL DETAILS

3 JAMB DETAILS

www.dynamicwindows.com Back to Index - 16 1

DIRECT GLAZED 3 2

DIRECT GLAZED L profile Z profile h profile 1 HEAD DETAILS

2 SILL DETAILS

3 JAMB DETAILS

www.dynamicwindows.com Back to Index - 17 DOOR ELEVATIONS

STEEL-ARTE DOOR SERIES MAX. DOOR HEIGHT: 108” MAX. DOOR WIDTH: 36” (PER SLAB)

Inswing steel-arte Inswing steel-arte Outswing steel-arte Outswing steel-arte Door Double Door Door Double Door

STILE & RAIL DOOR SERIES MAX. DOOR HEIGHT: 120” MAX. DOOR WIDTH: 48” (PER SLAB)

Inswing Stile Inswing Stile & Rail Outswing Stile Outswing Stile & Rail & Rail Door Double Door & Rail Door Double Door

www.dynamicwindows.com Back to Index - 18 1

OUTSWING STEEL-ARTE DOOR MAX. DOOR HEIGHT: 108” MAX. DOOR WIDTH: 36” 3 2

OUTSWING STEEL-ARTE DOOR 1 HEAD DETAILS

2 SILL DETAILS

3 JAMB DETAILS

www.dynamicwindows.com Back to Index - 19 1

OUTSWING STEEL-ARTE DOUBLE DOOR MAX. DOOR HEIGHT: 108” MAX. DOOR WIDTH: 36” (PER SLAB) 3 2

OUTSWING STEEL-ARTE DOUBLE DOOR 1 HEAD DETAILS

2 SILL DETAILS

3 JAMB DETAILS

www.dynamicwindows.com Back to Index - 20 1

OUTSWING STILE & RAIL DOOR MAX. DOOR HEIGHT: 120” 3 MAX. DOOR WIDTH: 50” 2

OUTSWING STILE & RAIL DOOR 1 HEAD DETAILS 2 3/8" 9/16" 1 9/16" 3 7/16" 1 9/16" 13/16" 1 3/16"

2 SILL DETAILS 7/8" 1 3/16" 13/16" 1 9/16" thresholds available in 3 7/16" aluminum, bronze or medium exposure threshold assorted hardwoods 1/4"

varies

check valve for drainage varies under positive pressure 1 1/8"

3 7/8" 3 JAMB DETAILS 1 9/16" 1 9/16" 13/16" 13/16" 1 9/16" 1 9/16" 1 3/16" 2 3/8" 2 3/8"

3 7/16" 3 7/16"

www.dynamicwindows.com Back to Index - 21 1

OUTSWING STILE & RAIL DOUBLE DOOR 4 MAX. DOOR HEIGHT: 120” MAX. DOOR WIDTH: 48” (PER SLAB) 3 2

OUTSWING STILE & RAIL DOUBLE DOOR 1 HEAD DETAILS 2 3/8" 9/16" 1 9/16" 3 7/16" 1 9/16" 13/16" 1 3/16"

2 SILL DETAILS 7/8" 1 3/16" 13/16" 1 9/16" thresholds available in 3 7/16" aluminum, bronze or medium exposure threshold assorted hardwoods 1/4"

varies

check valve for drainage varies under positive pressure 1 1/8"

3 7/8" 3 JAMB DETAILS

1 9/16" 1 9/16" 13/16" 13/16" 2 9/16" 1 9/16" 13/16" 13/16" 1 9/16" 1 9/16" 1 3/16" 1 3/16" 2 3/8" 2 3/8"

3 7/16" 2 7/16" 3 7/16" 3 7/16"

www.dynamicwindows.com Back to Index - 22 1

OUTSWING STILE & RAIL DOUBLE DOOR 4 MAX. DOOR HEIGHT: 120” MAX. DOOR WIDTH: 48” (PER SLAB) 3 2

OUTSWING STILE & RAIL DOUBLE DOOR 4 LOCKSET DETAILS

2 7/16" 3 7/16" 3 7/16"

www.dynamicwindows.com Back to Index - 23 1

INSWING STEEL-ARTE DOOR MAX. DOOR HEIGHT: 108” MAX. DOOR WIDTH: 36” 3 2

INSWING STEEL-ARTE DOOR 1 HEAD DETAILS

2 SILL DETAILS saddle secured to floor sill with drop down sweep

3 JAMB DETAILS

www.dynamicwindows.com Back to Index - 24 1

INSWING STEEL-ARTE DOUBLE DOOR MAX. DOOR HEIGHT: 108” MAX. DOOR WIDTH: 36” (PER SLAB) 3 2

INSWING STEEL-ARTE DOUBLE DOOR 1 HEAD DETAILS

2 SILL DETAILS saddle secured to floor sill with drop down sweep

3 JAMB DETAILS

www.dynamicwindows.com Back to Index - 25 1

INSWING STILE & RAIL DOOR MAX. DOOR HEIGHT: 120” MAX. DOOR WIDTH: 50” 3 2

INSWING STILE & RAIL DOOR 1 HEAD DETAILS 2 3/8" 9/16" 1 9/16" 2 9/16" 2 7/16" 13/16"

1 3/16"

2 SILL DETAILS

7/8" 1 3/16" 13/16" 2 7/8"

thresholds available in

aluminum, bronze or 2 9/16" assorted hardwoods 4 3/4" medium exposure threshold 3/16" 1 1/8" 1 9/16"

7 1/8" 3 JAMB DETAILS

9/16" 2 9/16" 13/16" 13/16" 2 9/16" 9/16" 1 13/16" 2 3/8" 2 3/8"

1 9/16" 2 7/16" 2 7/16" 1 9/16"

www.dynamicwindows.com Back to Index - 26 1

INSWING STILE & RAIL DOUBLE DOOR 4 MAX. DOOR HEIGHT: 120” MAX. DOOR WIDTH: 48” (PER SLAB) 3 2

INSWING STILE & RAIL DOUBLE DOOR 1 HEAD DETAILS 2 3/8" 9/16" 1 9/16" 2 9/16" 2 7/16" 13/16"

1 3/16"

2 SILL DETAILS

7/8" 1 3/16" 13/16" 2 7/8"

thresholds available in

aluminum, bronze or 2 9/16" assorted hardwoods 4 3/4" medium exposure threshold 3/16" 1 1/8" 1 9/16"

7 1/8" 3 JAMB DETAILS

9/16" 2 9/16" 13/16" 13/16" 2 9/16" 1 9/16" 13/16" 13/16" 2 9/16" 1 3/16" 2 3/8" 2 3/8"

1 9/16" 2 7/16" 2 7/16" 3 7/16" 2 7/16" 1 9/16"

www.dynamicwindows.com Back to Index - 27 1

INSWING STILE & RAIL DOUBLE DOOR 4 MAX. DOOR HEIGHT: 120” MAX. DOOR WIDTH: 48” (PER SLAB) 3 2

INSWING STILE & RAIL DOUBLE DOOR 4 LOCKSET DETAILS

3 7/16" 2 7/16" 2 7/16"

www.dynamicwindows.com Back to Index - 28 TRADITIONAL CASEMENT PROFILE FOR HISTORIC APPLICATIONS

For over 20 years Dynamic Architectural Windows & Doors has worked closely with landmark associations and numerous historic preservation authorities to develop unique solutions for historically significant buildings across North America.

With the introduction of the Steel-Arte line of products that commitment continues with the new Traditional Casement Profile. This traditional profile delivers the same tested performance and thermally-broken benefits of the other Steel-Arte designs and adds the exterior shadow lines of the historic putty profiles of yesterday.

www.dynamicwindows.com Back to Index - 29 MULLION REINFORCEMENT OPTIONS FACTORY -APPLIED, LASER WELDED

1 2 3 varies varies 1/16” varies

≥ 3/16” ≥ 3/16” 3/8”

4 5 6

2”

1/16” 1” 1” 1” 1/8” 1”

varies 2” 2 1/8”

1 9/16” laser welded "L" profile mechanically fastened "L" profile

7 8 9 3/8” ≥ 3/16” 3/8”

1/16” 1/16” varies varies varies

www.dynamicwindows.com Back to Index - 30 RADIUS PROFILES

1 2 3

frame only inswing designs outswing designs

Minimum Glazing Minimum Type R Stop R

R R 16” 16” R 16”

R 16” * NOTE: MINIMUM RADIUS IS THE SAME ON THE "L", "Z" AND "H" THERMALLY BROKEN PROFILES

R 16”

www.dynamicwindows.com Back to Index - 31 DRIP CAP OPTIONS

L profile Z profile h profile

DRIP CAPS ARE OPTIONAL ON OUTSWING PROFILES

DRIP CAPS ARE REQUIRED ON INSWING PROFILES

www.dynamicwindows.com Back to Index - 32 WINDOW HARDWARE OPTIONS TYPE 1 HANDLE - STEEL-ARTE TRADITIONAL CAM HANDLE

TYPE 2 HANDLE - STEEL-ARTE CONTEMPORARY CAM HANDLE

www.dynamicwindows.com Back to Index - 33 WINDOW HARDWARE OPTIONS TYPE 3 HANDLE - STEEL-ARTE EURO CAM HANDLE

www.dynamicwindows.com Back to Index - 34 WINDOW HARDWARE OPTIONS CASEMENT HINGE OPTIONS

STEEL-ARTE CASEMENT WELDED HINGE

STEEL-ARTE CASEMENT SCREW-ON HINGE

STEEL-ARTE CASEMENT EXTENDED HINGE

www.dynamicwindows.com Back to Index - 35 ALUMINUM GLAZING STOP OPTIONS

TYPE TYPE TYPE TYPE S1 S2 S3 S4

9/16” 13/16” 1” 1 3/16” 1/8” 1/8” 1/8” 9/16” 9/16” 9/16” 9/16”

www.dynamicwindows.com Back to Index - 36 STEEL GLAZING STOP OPTION

“L” STOP REGLETS WITH DIFFERENT CONTOURS & GLASS THICKNESSES

9/16” varies

5/32”

Steel-Arte “L” glass stop creates interesting reglets & contours for a unique contemporary or industrial appearance

www.dynamicwindows.com Back to Index - 37 S1 GLAZING STOP DETAILS OUTSWING WINDOW WALL

1 1

3 1 1 3 6 6

2 3 3 5 4 2 4

2 2 2 2 5

7 7 1 7 1

1 - H FRAME PROFILE 1 - L FRAME PROFILE

5/32” 5/32”

9/16” 3/8” 9/16” 3/8” 9/16”

1 9/16” 1”

www.dynamicwindows.com Back to Index - 38 S1 GLAZING STOP DETAILS OUTSWING WINDOW WALL 2 3 3/8” 5/32” 5/32” 5/32”

9/16” 3/8” 9/16” 13/16” 9/16” 3/8” 9/16”

1 9/16” 2 3/8”

4 5 5/32” 3/8” 5/32” 5/32” 3/8” 5/32”

13/16” 9/16” 3/8” 9/16” 13/16” 45/64” 17/64” 9/16”

2 3/8” 2 3/8”

www.dynamicwindows.com Back to Index - 39 S1 GLAZING STOP DETAILS OUTSWING WINDOW WALL 6 13/16” 5/32” 9/16” 3/8” 2 3/8” 3/8” 5/32” 9/16”

7 9/16” 5/32” 3/8” 3/8 ” 2 3/8” 9/16” 13/16”

www.dynamicwindows.com Back to Index - 40 S1 GLAZING STOP DETAILS INSWING WINDOW WALL

1 1

2 2 5 1 5

3 4 2 2 1 4

6 6 1 6 1

1 - H FRAME PROFILE 1 - L FRAME PROFILE

5/32” 5/32”

9/16” 3/8” 9/16” 3/8” 9/16”

1 9/16” 1”

www.dynamicwindows.com Back to Index - 41 S1 GLAZING STOP DETAILS INSWING WINDOW WALL 1 - T FRAME PROFILE 2 - H FRAME PROFILE 3/8” 5/32” 5/32”

9/16” 3/8” 9/16” 9/16” 3/8” 9/16” 13/16”

1 9/16” 2 3/8”

3 - T FRAME WITH SASH 4 5/32” 3/8” 5/32” 5/32” 3/8” 5/32”

9/16” 3/8” 9/16” 13/16” 13/16” 45/64” 17/64” 9/16”

2 3/8” 2 3/8”

www.dynamicwindows.com Back to Index - 42 S1 GLAZING STOP DETAILS INSWING WINDOW WALL 5 9/16” 5/32” 3/8” 2 3/8” 3/8” 9/16” 5/32” 13/16”

6 13/16” 5/32” 9/16” 3/8” 2 3/8” 3/8” 9/16”

www.dynamicwindows.com Back to Index - 43 S1 GLAZING STOP DETAILS INSWING CASEMENT A - A

5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 1 9/16” 1 9/16” 1 9/16” 1 9/16” 1 9/16”

B - B

3/16”

5/32” 5/32” 5/32” 5/32”

5/32” 5/32” 5/32” 5/32” 1 9/16” 1 9/16” 13/16” 1 9/16” 13/16” 1 9/16” 1 9/16” 2 3/8” 2 3/8”

C D

A A

B B

C D

www.dynamicwindows.com Back to Index - 44 S1 GLAZING STOP DETAILS INSWING CASEMENT C - C D - D 1 9/16” 1 9/16” 5/32” 5/32” 5/32” 5/32” 3/16” 1 9/16” 1 9/16” 5/32” 2 3/8” 5/32” 13/16” 5/32” 5/32” 1 9/16” 1 9/16” 5/32” 5/32” 13/16” 2 3/8” 5/32” 1 9/16” 1 9/16” 3/16” 5/32” 5/32” 5/32” 1 9/16” 1 9/16”

www.dynamicwindows.com Back to Index - 45 S1 GLAZING STOP DETAILS OUTSWING CASEMENT A - A

5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 1 9/16” 1 9/16” 1 9/16” 1 9/16” 1 9/16”

B - B

5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 1 9/16” 5/32” 5/32” 1 9/16” 1 9/16” 13/16” 1 9/16” 13/16” 1 9/16” 2 3/8” 2 3/8”

C D

A A

B B

C D

www.dynamicwindows.com Back to Index - 46 S1 GLAZING STOP DETAILS OUTSWING CASEMENT C - C D - D 1 916” 1 916” 5/32” 5/32” 13/16” 5/32” 1 916” 5/32” 2 3/8” 1 916” 3/16” 5/32” 5/32” 5/32” 1 916” 1 916” 5/32” 5/32” 5/32” 3/16” 1 916” 2 3/8” 5/32” 1 916” 5/32” 5/32” 13/16” 5/32” 5/32” 1 916” 1 916”

www.dynamicwindows.com Back to Index - 47 S1 GLAZING STOP DETAILS OUTSWING AWNING

A - A

5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 1 9/16” 1 9/16” 1 9/16” 1 9/16” 1 9/16”

B - B 3/16” 3/16”

5/32” 9/16” 3/8” 9/16” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 1 9/16” 13/16” 1 9/16” 1 9/16” 1 9/16” 13/16” 1 9/16”

C D

A A

B B

C D

www.dynamicwindows.com Back to Index - 48 S1 GLAZING STOP DETAILS OUTSWING AWNING C - C D - D 1 9/16” 1 9/16” 5/32” 5/32” 13/16” 5/32” 1 9/16” 5/32” 2 3/8” 1 9/16” 3/16” 5/32” 5/32” 5/32” 1 9/16” 1 9/16” 5/32” 5/32” 5/32” 1 9/16” 2 3/8” 5/32” 1 9/16” 5/32” 5/32” 13/16” 5/32” 5/32” 1 9/16” 1 9/16”

www.dynamicwindows.com Back to Index - 49 S3 GLAZING STOP DETAILS OUTSWING WINDOW WALL

1 1

3 1 1 3 6 6

2 3 3 5 4 2 4

2 2 2 2 5

7 7 1 7 1

1 - H FRAME PROFILE 1 - L FRAME PROFILE 5/32” 5/32”

9/16” 3/8” 9/16” 3/8” 9/16” 1 9/16” 1”

www.dynamicwindows.com Back to Index - 50 S3 GLAZING STOP DETAILS OUTSWING WINDOW WALL 2 3 5/32” 5/32” 3/8” 5/32”

9/16” 3/8” 9/16” 13/16” 9/16” 3/8” 9/16” 1 9/16”

2 3/8”

4 5 5/32” 3/8” 5/32” 5/32” 3/8” 5/32”

13/16” 9/16” 3/8” 9/16” 13/16” 45/64” 17/64” 9/16”

2 3/8” 2 3/8”

www.dynamicwindows.com Back to Index - 51 S3 GLAZING STOP DETAILS OUTSWING WINDOW WALL 6 13/16” 5/32” 13/16” 2 3/8” 3/8 ” 13/16” 5/32” 13/16”

7 9/16” 5/32” 3/8” 2 3/8” 3/8” 9/16” 13/16”

www.dynamicwindows.com Back to Index - 52 S3 GLAZING STOP DETAILS INSWING WINDOW WALL

1 1

2 2 5 1 5

3 4 2 2 1 4

6 6 1 6 1

1 - H FRAME PROFILE 1 - L FRAME PROFILE

9/16” 3/8” 9/16” 3/8” 9/16” 1 9/16” 1”

www.dynamicwindows.com Back to Index - 53 S3 GLAZING STOP DETAILS INSWING WINDOW WALL 1 - T FRAME PROFILE 2 3/8” 5/32”

5/32”

9/16” 3/8” 9/16” 9/16” 3/8” 9/16” 13/16”

1 9/16” 2 3/8”

3 - T FRAME WITH SASH 4 5/32” 3/8” 5/32” 5/32” 3/8” 5/32”

9/16” 3/8” 9/16” 13/16” 13/16” 45/64” 17/64” 9/16”

2 3/8” 2 3/8”

www.dynamicwindows.com Back to Index - 54 S3 GLAZING STOP DETAILS INSWING WINDOW WALL 5 9/16” 5/32” 3/8” 3/8” 2 3/8” 9/16 ” 5/32” 13/16”

6 13/16” 5/32” 9/16” 3/8” 2 3/8” 3/8” 9/16”

www.dynamicwindows.com Back to Index - 55 L GLAZING STOP DETAILS OUTSWING WINDOW WALL

1 1

3 1 1 3 6 6

2 3 3 5 4 2 4

2 2 2 2 5

7 7 1 7 1

1 - H FRAME PROFILE 1 - L FRAME PROFILE

5/23” 5/23”

9/16” 3/8” 9/16” 3/8” 9/16” 1 9/16” 1”

www.dynamicwindows.com Back to Index - 56 L GLAZING STOP DETAILS OUTSWING WINDOW WALL

2 3 3/8” 5/32” 5/32” 5/32”

13/16” 9/16” 3/8” 9/16” 9/16” 3/8” 9/16”

2 3/8” 1 9/16”

4 5 5/32” 3/8” 5/32” 5/32” 3/8” 5/32”

13/16” 9/16” 3/8” 9/16” 13/16” 45/64” 17/64” 9/16”

2 3/8” 2 3/8”

www.dynamicwindows.com Back to Index - 57 L GLAZING STOP DETAILS OUTSWING WINDOW WALL 6 13/16” 5/32” 9/16” 3/8 ” 2 3/8” 3/8” 5/32 ” 9/16”

7 9/16” 5/32” 3/8” 3/8” 2 3/8” 9/16” 13/16”

www.dynamicwindows.com Back to Index - 58 L GLAZING STOP DETAILS INSWING WINDOW WALL

1 1

2 2 5 1 5

3 4 2 2 1 4

6 6 1 6 1

1 - H FRAME PROFILE 1 - L FRAME PROFILE

5/32” 5/32”

9/16” 3/8” 9/16” 3/8” 9/16” 1 9/16” 1”

www.dynamicwindows.com Back to Index - 59 L GLAZING STOP DETAILS INSWING WINDOW WALL 1 - T FRAME PROFILE 2 - H FRAME PROFILE 3/8” 5/32” 5/32”

9/16” 3/8” 9/16” 9/16” 3/8” 9/16” 13/16”

1 9/16” 2 3/8”

3 - T FRAME WITH SASH 4 5/32” 3/8” 5/32” 5/32” 3/8” 5/32”

9/16” 3/8” 9/16” 13/16” 13/16” 45/64” 17/64” 9/16”

2 3/8” 2 3/8”

www.dynamicwindows.com Back to Index - 60 L GLAZING STOP DETAILS INSWING WINDOW WALL 5 9/16” 5/32” 3/8” 2 3/8” 3/8” 9/16” 5/32” 13/16”

6 13/16” 5/32” 9/16” 3/8” 2 3/8” 3/8” 9/16”

www.dynamicwindows.com Back to Index - 61 L GLAZING STOP DETAILS INSWING CASEMENT

A - A

5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 1 9/16” 1 9/16” 1 9/16” 1 9/16” 1 9/16”

B - B

3/16”

5/32” 5/32” 5/32” 5/32”

5/32” 5/32” 45/64” 5/32” 5/32” 1 9/16” 1 9/16” 13/16” 13/16” 17/64” 9/16” 13/16” 1 9/16” 1 9/16” 2 3/8” 2 3/8”

C D

A A

B B

C D

www.dynamicwindows.com Back to Index - 62 L GLAZING STOP DETAILS INSWING CASEMENT

C - C D - D 1 9/16” 1 9/16” 5/32” 5/32” 5/32” 5/32” 1 9/16” 3/16” 5/32” 1 9/16” 2 3/8” 5/32” 13/16” 5/32” 5/32” 1 9/16” 1 9/16” 5/32” 5/32” 13/16” 5/32” 2 3/8” 1 9/16” 5/32” 1 9/16” 3/16” 5/32” 5/32” 5/32” 1 9/16” 1 9/16”

www.dynamicwindows.com Back to Index - 63 TYPICAL INSTALLATION DETAILS

1” 3/16” 1” 2 3/16”

Direct Glazed Mullion

3/64” 3/64” 9/16” 9/16” 1” 3/8” 3/8” 1 9/16”

9/16” 9/16” x 9/16”

3/64” 3/64”

9/16” 3/8” 9/16” 3/8” 9/16” 1 9/16” 1”

Direct Glazed Corner Mulling Options

DISCLAIMER: THESE INSTRUCTIONS AND METHODS MAY NOT BE APPROPRIATE FOR A SPECIFIC INSTALLATION DUE TO DESIGN OF THE BUILDING, CONSTRUCTION METHODS USED, BUILDING CONDITIONS OR SITE CONDITIONS, ANY OF WHICH MAY REQUIRE DIFFERENT METHODS OR PROCEDURES. THE ARCHITECT, BUILDING ENVELOPE SPECIALIST OR INSTALLATION CONTRACTOR IS RESPONSIBLE FOR DETERMINING THE INSTALLATION METHOD AND PROCEDURE FOR PROJECT SPECIFIC INSTALLATIONS. THESE DRAWINGS ARE NOT TO BE USED FOR CONSTRUCTION PURPOSES.

www.dynamicwindows.com Back to Index - 64 TYPICAL INSTALLATION DETAILS

www.dynamicwindows.com Back to Index - 65 TYPICAL INSTALLATION DETAILS

www.dynamicwindows.com Back to Index - 66 TYPICAL INSTALLATION DETAILS

www.dynamicwindows.com Back to Index - 67 TYPICAL INSTALLATION DETAILS

1 3/16” x 1 3/16”

www.dynamicwindows.com Back to Index - 68 ®

Dynamic Architectural Windows & Doors 30440 Progressive Way Abbotsford, BC Canada V2T 6W3 Toll Free 1.800.661.8111 or email [email protected] Fax (604) 864.6072 www.dynamicwindows.com © Copyright 2012 Dynamic Architectural Windows & Doors. All rights reserved.