Lockwood Plate Door Furniture

Plate Door Furniture Door Furniture and General Hardware

Plate Door Furniture

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.79 Plate Door Furniture 1800 Series Square End Plate Furniture

For a smart look choose this rectangular plate with bevelled edges and corners. It features concealed fixing on the outside plate. Application Designed for use with Lockwood Synergy Mortice Locks and Latches. Features and Specifications Handing Plates are not handed; lever may be For compatility chart reversed by removing stop screw, except 00 20 32 40 41* 42* 43 44 45 48* 49 50* 51* 52* for handed levers as shown in the ordering

procedure. 53* 54* 56* 57 59 60 61* 69 70 80 83 87 90 97 Dimensions 166 x 48 x 12mm Fixing 2800 2801 2802 2803 2804 2805 2806 2807 28082809 2810 2813 Plates are designed to fit back to back. 32 41 44 45 53 55 55A 59 If outside plate is specified with concealed Symphony only 00 1801/90CP fixing, then the inside plate must be visible fixed. 60 61 65 66 67 70 71 74 28142815 2816 2820 2821 2822 2823 2878 61* Door Thickness 76 77 78 79 79B 80 83 85 External plates are supplied with fixing screws to

suit door thickness between 32 and 50mm. Levers90 and92 Knobs to97 Suit For thicker doors, please refer to the brass 2900 2901 2904 2905 29062907 2908 2909 2920 2921 2922 2939 furniture thicker doors page at the end of this Other brass only 40 50* 20 32 41 44 45 53 55 55A catalogue section.

Turn Functions 62 59 60 61 65 66 67 70 71 Turn functions feature a unique mechanism that automatically adjusts the length of the91 tail bar 94* 74 76 77 78 79 79B 80 83 to suit a particular door thickness. Finishes 85 90 92 97 Standard Satin Chrome Brushed SC Plates and Functions Short backset brass Non Standard 180000 180132 1802 180341* 1804 180542* 180645 1807 180848* 1809 49 1810 181351* 1814 52* 53* 54* 56* Polished Brass PB 57 59 60 61* 70 71 80 87 90 97 Chrome Plate CP 83 Polished Brass Unlaqured BU For compatility chart 00 20 32 40 41* 42* 43 44 45 48* 49 50* 51* 52* Polyester Powdercoat PC 1815 1816 1820 1821 1822 1823 1878 Satin Brass SB 53* 54* Architectural56* Bronze57 59 60 AZ 61* 69 70 80 83 87 90 97 Architectural Bronze Unlaqured AU Antique Copper AC 1900 1901 1904 1905 19061907 1908 1909 1920 1921 1922Symphony1938 1939 only 00 32 Oil Rubbed41* Bronze44 45 48* ORB53* 55

59 61* For the62 powdercoat70 color71 range,74 please78 see 79 the Dulux Powdercoat Range at the end of this

79B 80 catalogue90 section.91 94* 97 Plates and Functions Legend

Cylinder Hole Fixed Lever Indicating TurnknobOther brass only 00 20 32 40 41* 44 45 48* FIRE RATED DURABILITY Turnknob Disabled Indicating Slotted Turn 53* 55 59 61* 62 70 71 74 Slotted Turn LED Lever S3 HIGH SECURITY ANTI-CORROSION

78 79 79B 80 90 91 94* 97 5800 5801 5802 5803 5805 5807 5820 5822 5823 Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.80 Short backset brass 00 32 41* 42* 45 48* 49 51* 52* 53* 54* 56*

5900 5901 5904 5905 5906 5907 5917 5918 5920 5922 57 59 60 61* 70 71 80 83 87 90 97

4800 4801 4802 4803 4805 4807 4820 4822 4823

4900 4901 4904 4905 4906 4907 4917 4918 4920 4922

4600 4601 4602 4603 4605 4607 4620 4622 4623

4700 4701 4704 4705 4706 4707 4717 4718 4720 4722 Plate Door Furniture 2800 Series Round End Plate Furniture

A beautifully curved brass plate with bevelled edges and the benefit of concealed fixing on the external plate. Application Designed for use with Lockwood Synergy Mortice Locks and Latches. Features and Specifications Handing Plates are not handed, lever may be reversed by removing stop screw, except for handed levers For compatility chart 00 20 32 40 41* 42* 43 44 45 48* 49 50* 51* 52* as shown in the ordering procedure. Dimensions 53* 54* 56* 57 59 60 61* 69 70 80 83 87 90 97 166 x 48 x 12mm Fixing Plates are designed to fit back to back. If outside plate is specified with concealed 32 41 44 45 53 55 55A 59 fixing, then the inside plate must be visible fixed. 2801/90CP Symphony only 00 Door Thickness 60 61 65 66 67 70 71 74 External plates are supplied with fixing screws to 61* suit door thickness between 32 and 50mm. 76 77 78 79 79B 80 83 85 For thicker doors, please refer to the brass Levers and Knobs to Suit 90 92 97 furniture thicker doors page at the end of this For detailed information regarding brass levers refer to page 3.100 catalogue section. Other brass only 40 50* 20 32 41 44 45 53 55 55A Turn Functions Turn functions feature a unique mechanism that 62 59 60 61 65 66 67 70 71 automatically adjusts the length of the tail bar to suit a particular door thickness. 91 94* 74 76 77 78 79 79B 80 83 Finishes

Standard 85 90 92 97 Satin Chrome Brushed SC Plates and Functions Non Standard Short backset brass Polished Brass PB 280000 280132 2802 280341* 2804 280542* 280645 2807 280848* 280949 2810 281351* 52* 53* 54* 56* Chrome Plate CP Door Furniture and General Hardware Polished Brass Unlaqured BU 57 59 60 61* 70 71 80 83 87 90 97 Polyester Powdercoat PC Satin Brass SB 28142815 2816 2820 2821 2822 2823 2878 Architectural Bronze AZ Architectural Bronze Unlaqured AU Antique Copper AC Oil Rubbed Bronze ORB 2900 2901 2904 2905 29062907 2908 2909 2920 2921 2922 2939 For the powdercoat color range, please see the Dulux Powdercoat Range at the end of this catalogue section.

Plates and Functions Legend

Cylinder Hole Fixed Lever Indicating Turnknob

FIRE RATED DURABILITY Turnknob Disabled Indicating Slotted Turn Slotted Turn LED Lever S3 HIGH SECURITY ANTI-CORROSION

1800 1801 1802 1803 1804 1805 1806 1807 18081809 1810 1813 1814 Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.81

1815 1816 1820 1821 1822 1823 1878

1900 1901 1904 1905 19061907 1908 1909 1920 1921 1922 1938 1939

5800 5801 5802 5803 5805 5807 5820 5822 5823

5900 5901 5904 5905 5906 5907 5917 5918 5920 5922

4800 4801 4802 4803 4805 4807 4820 4822 4823

4900 4901 4904 4905 4906 4907 4917 4918 4920 4922

4600 4601 4602 4603 4605 4607 4620 4622 4623

4700 4701 4704 4705 4706 4707 4717 4718 4720 4722 Plate Door Furniture 1800 and 2800 Series Ordering Procedure

Ordering Procedure Sample part number 1801/41LCP is made up of several sections. Choose your product by selecting an option from each section. For example: Lockwood 1800 and 2800 Series Plate Furniture

Plate Type Plate Lever/ Handing Finish Function Knob 18 01 / 41 L CP

Plate Type Plate Function Lever/Knob Type Handing

Exterior Square End 18 Cylinder Only 00 20 60 79 Right Handed R Interior Square End 19 Cylinder & Lever 01 32 65 79B Left Handed L Exterior Round End 28 Emergency Turn Only 02 44 66 83 NB: Omit if non-handed Interior Round End 29 Emergency Turn & Lever 03 45 67 97

Turnknob & Lever 04 55 71 Finish Lever Only 05 55A 78 Satin Chrome SC Turnknob Only 06 Polished Brass PB Plain Plate 07 AS1428.1 Compliant Levers Chrome Plate CP Cylinder & Fixed Lever 08 59 76 85 Polished Brass Unlaqured BU Fixed Lever Only 09 70 77 90 Polyester Powdercoat PC* Two Cylinders 10 74 80 92 Satin Brass SB Privacy Indicator Handed Levers Architectural Bronze AZ Emergency Turn Only 13 Architectural Bronze Privacy Indicator 41 53 61 Unlaqured AU Emergency Turn & Lever 14 Antique Copper AC Privacy Indicator Turnknob Only 15 Oil Rubbed Bronze ORB Privacy Indicator * For the powdercoat color range, please see the Dulux Powdercoat Range Turnknob & Lever 16 at the end of this catalogue section.

Privacy Indicator Emergency

Turn & Lower Cylinder 19

Cylinder, Lever & LED 20

Cylinder, Fixed Lever & LED 21 Lever & LED 22

Cylinder & LED 23

Proximity Cylinder & Lever 78

Plate Function - Handed

Disabled Accessible Turnknob Only – Synergy 38

Disabled Accessible Turnknob

& Lever – Synergy 39

Privacy Indicating Disabled

Turn Only - Synergy 40

Privacy Indicating Disabled Turn & Lever - Synergy 41

Lockwood Product Catalogue Module (Version 1.4) 3.82 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture Proximity Furniture

Easy to install and operate, Lockwood Proximity Furniture is available in a wide range of stylish levers and finishes to enhance any contemporary building design, bringing a new dimension to commercial security locking solutions. Proximity Mortice Lock Specifications • Multivoltage 12-24VDC • Field selectable fail safe/fail secure • 60mm backset only

Monitoring The following monitoring features are standard: • Dual key override • Deadlatched and locked • Door closed • Request to exit

Proximity Reader Specifications • HID 125KHz proximity reader • Wiegand data output • Supply voltage: 5-12VDC • Current requirements (stand by/peak) 25/90mA @ 5VDC, 15/125mA @ 12VDC • Beeper activated when presenting proximity card 2878/70CP • Red/green led indication of reader/lock status

For details refer to 5.44 Door Furniture and General Hardware

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.83 Plate Door Furniture 4800 Series Narrow Stile Plate Furniture

185

For compatility chart 00 20 32 40 41* 42* 43 44 45 48* 49 50* 51* 52* 26 11.5

53* 54* 56* 57 59 60 61* 69 70 80 83 87 90 97 Levers to Suit For detailed information regarding brass levers refer to page 3.100

32 41 44 45 53 55 55A 59 Symphony only 00 60 61 65 66 67 70 71 74

61* 76 77 78 79 79B 80 83 85

4801/32CP 90 92 97

4800/4900 Plates and Functions (3580 Series) Other brass only A slimline, rectangular brass plate that adds40 50* 20 32 41 44 45 53 55 55A style to your choice of lever. 4800 4801 4802 4803 4805 4807 4808 4809 48104820 4822 4823 Application 62 59 60 61 65 66 67 70 71 Designed for use with Lockwood 3570 91 94* 74 76 77 78 79 79B 80 83 Synergy Series and 3P70 Pentagon Series Mortice Latches (4600/4700) and 3580 Series 4900 4901 4904 4905 4906 4907 4908 49094910 4938 4939 4920 4922 92 Synergy and 3P80 Pentagon Mortice Latches 85 90 97 (4800/4900) Note: certain lever designs are not compatible on short backset Short backset brass assemblies due to interference with the door stop. Refer to the 00 32 41* 42* 45 48* 49 51* 52* 53* 54* 56* Back Set Suitability page at the end of this section. 4600/470057 59 Plates and60 Functions61* (357070 Series) 71 FIRE80 RATED 83 87 90 97 Features and Specifications 4600 4601 4602 4603 4805 4807 4608 4809 4620 4622 4623 Dimensions 185 x 26 x 11.5mm Fixing Plates are designed to fit back to back. If outside plate is specified with concealed 4700 4701 4704 4905 4706 4907 4708 4909 4738 4739 4720 4722 fixing, then the inside plate must be visible fixed. All lever handles are reversible, except those shown in the ordering procedure.

Door Thickness Lever and plain plate version use 4800/4900 equivalent External plates are supplied with fixing screws to suit door thickness between 32 and 50mm. Plates and Functions Legend For thicker doors, please refer to the brass Cylinder Hole Fixed Lever Indicating Turnknob furniture thicker doors page at the end of this catalogue section. Turnknob Disabled Accessible Indicating Slotted Turn Slotted Turn LED Lever FIRE RATED DURABILITY * 3570 Series only S3 HIGH SECURITY ANTI-CORROSION

Lockwood Product Catalogue Module (Version 1.4) 3.84 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture 5800 Series Narrow Stile Plate Furniture

185

For compatility chart 00 20 32 40 41* 42* 43 44 45 48* 49 50* 51* 52* 26 11.5

53* 54* 56* 57 59 60 61* 69 70 80 83 87 90 97 Levers to Suit For detailed information regarding brass levers refer to page 3.100

32 41 44 45 53 55 55A 59 Symphony only 00 60 61 65 66 67 70 71 74

61* 76 77 78 79 79B 80 83 85

5801/71CP 90 92 97

5800/5900 Plates and Functions (3580 Series) Other brass only Functional, yet elegant, the soft lines of this40 50* 20 32 41 44 45 53 55 55A round ended brass plate complement a wide 5800 5801 5802 5803 5805 5807 5808 5809 5810 5820 5822 5823 range of levers. 62 59 60 61 65 66 67 70 71

Application 91 94* 74 76 77 78 79 79B 80 83 Designed for use with Lockwood 3570 5900 5901 5904 5905 5906 5907 5908 5909 5910 5938 5939 5920 5922 Synergy Series and 3P70 Pentagon Series 85 90 92 97 Mortice Latches (4600/4700) and 3580 Series Synergy and 3P80 Pentagon Mortice Latches (4800/4900) Short backset brass 00 32 41* 42* 45 48* 49 51* 52* 53* 54* 56* Note: certain lever designs are not compatible on short backset assemblies due to interference with the door stop. Refer to the 57 59 60 61* 70 71 80 87 90 97 backset suitability chart on page 3.87. 5600/5700 Plates and Functions (3570 Series) FIRE RATED 83 Features and Specifications 5600 5601 5602 5603 5805 5807 5608 5809 5620 5622 5623

Dimensions Door Furniture and General Hardware 185 x 26 x 11.5mm Fixing Plates are designed to fit back to back. 5700 5701 5704 5905 5706 5907 5708 5909 5738 5739 5720 5722 If outside plate is specified with concealed fixing, then the inside plate must be visible fixed. All lever handles are reversible, except those shown in the ordering procedure. Lever and plain plate version use 5800/5900 equivalent Door Thickness External plates are supplied with fixing screws Plates and Functions Legend to suit door thickness between 32 and 50mm. Cylinder Hole Fixed Lever Indicating Turnknob For thicker doors, please refer to the brass furniture thicker doors page at the end of this Turnknob Disabled Accessible Indicating Slotted Turn catalogue section. Slotted Turn LED Lever

FIRE RATED DURABILITY * 3570 Series only S3 HIGH SECURITY ANTI-CORROSION Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.85 Rose Door Furniture 4800 and 5800 Series Ordering Procedure

Ordering Procedure Sample part number 4801/53LCP is made up of several sections. Choose your product by selecting an option from each section. For example: Lockwood 4800/5800, 4600/5600 Series Plate Furniture

Plate Type Plate Lever Handing Finish Function Type 48 01 / 53 L CP

Plate Type Lever Type Finish

3570 32 60 78 Satin Chrome SC Exterior Square End 46 44 65 79 Polished Brass PB Interior Square End 47 45 66 79B Chrome Plate CP Exterior Round End 56 55 67 83 Polished Brass Unlaqured BU Interior Round End 57 55A 71 97 Polyester Powdercoat PC* Satin Brass SB 3580 AS1428.1 Compliant Levers Exterior Square End 48 Architectural Bronze AZ 59 76 85 Interior Square End 49 Architectural Bronze 70 77 90 Unlaqured AU Exterior Round End 58 74 80 92 Antique Copper AC Interior Round End 59 Oil Rubbed Bronze ORB Handed Levers * For the powdercoat color range, Plate Function 41 53 61 please see the Dulux Powdercoat Range at the end of this catalogue Cylinder Only 00 section.

Cylinder & Lever 01 Handing Emergency Turn Only 02 Right Handed R Emergency Turn & Lever 03 Left Handed L Turnknob & Lever 04 NB: Omit if non-handed Lever Only 05 Turnknob Only 06 Plain Plate 07

Two Cylinders 10 Cylinder, Lever & LED 20 Lever & LED 22

Cylinder & LED 23

Plate Function - Handed Fixed Lever & Cylinder 08

Fixed Lever Only 09

Disabled Accessible Turnknob Only – Synergy 38S Disabled Accessible Turnknob & Lever – Synergy 39S

Lockwood Product Catalogue Module (Version 1.3) 3.86 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture Lockwood 4800/5800 Series Plate Furniture

Application All narrow style door furniture will be closer to the door frame. Lever handles with 90 degree angles can cause the lever stem to hit the door frame and prevent the door from opening. The table below provides a guide to lever compatibility and each model of short back set lock from 3582 to 6580.

Backset Suitability Chart Based on 12mm doorstop

Lever 3580 4580 5580 6580 Number 23mm 25.4mm 30mm 38mm 32 7 7 3 3

41 7 7 3 3

44 7 7 7 7

45 7 7 3 3

53 7 7 3 3

55 7 7 7 7

55A 7 7 3 3

59 7 7 3 3

60 7 7 3 3

61 7 3 3 3

65 7 7 3 3

66 7 7 3 3

67 3 3 3 3

70 3 3 3 3

71 7 7 3 3

74 7 7 3 3

76 7 7 3 3 Door Furniture and General Hardware

77 3 3 3 3

78 7 7 3 3

79 7 7 7 7

79B 7 7 3 3

80 7 3 3 3

83 7 7 3 3

85 7 7 3 3

90 7 7 3 3

92 7 7 3 3

97 3 3 3 3

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.87 Plate Door Furniture 200 Series Artefact Square Corner Plates

The 200 Series Door Furniture is 162mm square with square corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Series Mortice Locks; Latches and Push and Pull doors. Features and Specifications Dimensions 162 x 162 x 3mm – aluminium 162 x 162 x 2mm – stainless steel and brass Materials Aluminium, brass and stainless steel Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. 20001NA/96LSS Note: When using flush pulls back to back the minimum door thickness is 40mm.

Finishes Levers and Knob to Suit Brass levers and knobs also available on stainless steel and brass plates Standard refer page 3.100 20 8*8 69 89 Natural Anodised Aluminium NT *Aluminium Only Satin Stainless Steel SS Pull Handle to Suit Non Standard

Polished Stainless Steel PS 11 1257 P1*58 Powdercoat PC Aluminium Stainless Steel Marine Grade MG Plates Polished Brass PB

20000NA 20100NA NN20002 20006NN 20106NN2AN01002 0013NN 20138NN

16223 20007AN 20007CN NE70002 20007FN 20007NN NN70102

162

48.7 20001NA 20101NA NN30002 20004NN 20104NN NN41002 20020NA 20120NA

28.6 SS/Brass Aluminium

20005NN 20105NN 20022NN 20122NN 20139NN

20024NN/75* 20124NN/75* 20025NA/75* 20125NA/75* 20027NN/75* 20127NN/75* 20028NN/75* 20142NN/75*

20024AN/75* 20024CN/75* 20024EN/75* 20024GN/75* 20031NN 20131NN 20032NA 20132NA 20035NN 20134NN

Legend FIRE RATED DURABILITY Cylinder Hole Slotted Button LED S3 HIGH SECURITY ANTI-CORROSION Turn-Snib Disabled Indicating Slotted Button

Lockwood Product Catalogue Module (Version 1.4) 3.88 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture 202 Series Artefact 10mm Radius Corner Plates

The 202 Series Door Furniture is 162mm square with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Series Mortice Locks; Latches and Push and Pull doors. Features and Specifications Dimensions 162 x 162 x 3mm – aluminium 162 x 162 x 2mm – stainless steel and brass Materials Aluminium, stainless steel and brass. Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. 20201NA/98LSS Note: When using flush pulls back to back the minimum door thickness is 40mm.

Polished Stainless Steel PS 11 1257 P1*58 Powdercoat PC Aluminium Stainless Steel Marine Grade MG Plates Polished Brass PB

AN00302AN00202 20202NN 20206NN NN60302 20210NA NN83302NN31202

16223

20207AN 20207CN 20207EN 20207FN 20207NN 20307NN 162 Door Furniture and General Hardware

48.7 20201NA 20301NA NN30202 20204NN 20304NN NN41202 20220NA 20320NA 28.6 SS/Brass Aluminium

20205NN 20305NN 20222NN 20322NN 20339NN

20224NN/16* 20324NN/16* 20225NA/16*20325NA/16* 20227NN/16* 20327NN/16* 20228NN/16* 20342NN/16*

16 16 16 16 NN13202*/NG42202*/NE42202*/NC42202*/NA42202 NN13302 20232NA AN23302 NN43202NN53202

Legend FIRE RATED DURABILITY Cylinder Hole Slotted Button LED S3 HIGH SECURITY ANTI-CORROSION Turn-Snib Disabled Indicating Slotted Button

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.89 Plate Door Furniture 200/202 Series Artefact Ordering Procedure

Ordering Procedure Sample part number 20001NA/96LSS is made up of several sections. Choose your product by selecting an option from each section. For example: 200 Series

Plate Type Plate Engraving Cylinder Lever/Knob/ Handing Finish Function Shape Pull Handle 200 01 N A / 96 L SS

Plate Type Plate Function Engraving Lever/ Knob Type Exterior Plate (162 x 162) Plain Plate 07 A – G Outlined Infill 20 65 80 – Square Corners 200 R – X Full Infill Pull Handle Only 24 20*2 66 83 Interior Plate (162 x 162) Male symbol A R 32 67 90 – Square Corners 201 Plate Function - Handed Male text B S 44 71 92 Exterior Plate (162 x 162) Cylinder Only 00 Female symbol C T – Radius Corners 202 45 74 97 Cylinder & Lever 01 Female text D U Interior Plate (162 x 162) 55 78 98*1 – Radius Corners 203 Emergency Turn Only 02 Disabled symbol E V 55A 79 98*2 Emergency Turn & Lever 03 Push text F W 60 79B Turn Knob & Lever 04 Pull text G X Lever Only 05 Unisex symbol H Y AS1428.1 Compliant Levers 2 Turn Knob Only 06 No option N 59 85 96* 2 Cylinder & Fixed Lever 08 Miscellaneous text* P 76 88* 1 Fixed Lever Only 09 Corporate Engraving** Q 77 96* Dual Cylinder 10 *Separate charge per letter ** Separate charge per logo Handed Levers Privacy Indicator For all in-filled engraving, black gloss 41 53 61 Emergency Turn Only 13 is the standard. Privacy Indicator Pull Handles Emergency Turn & Lever 14 Cylinder Shape P1 P1*1 75*2 Privacy Indicator Oval Cylinder – Handles are brass unless indicated Turn Knob Only 15 32mm (H) x 18mm (W) otherwise 1 Privacy Indicator Lockwood 570 Cylinders A * = Stainless Steel *2 = Aluminium Turn Knob & Lever 16 Guarded Oval Cylinder – Cylinder, Lever & LED 20 32mm (H) x 18mm (W) Lockwood 570 Cylinders B Handing Cylinder, Fixed Lever & LED 21 No Cylinder Function N Left Handed L Lever & LED 22 Disabled Accessible Turn – Right Handed R Cylinder & LED 23 Pentagon P Pull Handle & Cylinder 25 Finish Pull Handle & Emergency Turn 26 Stainless Steel Finishes Pull Handle & Turn Knob 27 Satin Stainless Steel SS Pull Handle & Privacy Polished Stainless Steel PS Indicator Emergency Turn 28 Powdercoat PC Pull Handle & Privacy Indicator Turn Knob 29 Marine Grade MG Pull Handle & Dual Cylinder 30 Aluminium Finishes Flush Pull Only 31 Natural Anodised NT Flush Pull & Cylinder 32 Brass Finishes Flush Pull & Emergency Turn 33 Polished Brass PB Flush Pull & Turn Knob 34 Flush Pull & Privacy Indicator Emergency Turn 35 Flush Pull & Privacy Indicator Turn Knob 36 Flush Pull & Dual Cylinder 37 Disabled Turn Only 38 Disabled Turn & Lever 39 Pull Handle & Disabled Turn 42

Lockwood Product Catalogue Module (Version 1.4) 3.90 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture 212 Series Artefact Oval Plates

The 212 Series Door Furniture is 162mm long x 50mm wide with radius ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Series Mortice Latches. Features and Specifications Dimensions 162 x 50 x 3mm – aluminium 162 x 50 x 2mm – stainless steel and brass Materials Aluminium, stainless steel or brass. Door Thickness 35 to 45mm standard. For doors 45 to 55mm 21201NA/50LSS thick, specify long fixing screws SP2000-208. *Obsolete lever Finishes Standard Natural Anodised Aluminium NT Levers and Knob to Suit Brass levers and knobs also available on stainless steel and brass plates Stainless Steel SS refer page 3.100 Non Standard 20 8*8 69 89 *Aluminium Only Polished Stainless Steel PS Pull Handle to Suit Powdercoat PC

Marine Grade MG 11 1257 P1*58 Polished Brass PB Aluminium Stainless Steel Plates

50 2 3

21200NA 21300NA 21202NN 21206NN 21306NN 21207NN21307NN 21210NA 21213NN 21338NN 162

2 NN40312NN40212NN30212AN10312AN1021 21205NN 21305NN 21214NN 21339NN

SS/Brass Aluminium Door Furniture and General Hardware

21220NA 21320NA 21222NN 21322NN

Legend Cylinder Hole Slotted Button LED

Turn-Snib Disabled Indicating Slotted Button

FIRE RATED DURABILITY

S3 HIGH SECURITY ANTI-CORROSION

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.91 Plate Door Furniture 224 Series Artefact Rectangular Plates

The 224 Series Door Furniture is 162mm long x 50mm wide with square ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door. Application Designed for use with Lockwood 3570 Series Mortice Latches. Features and Specifications Dimensions 162 x 50 x 2mm – stainless steel Materials Stainless Steel only. Door Thickness 35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208. 22401NA/70LSS Standard Finishes Stainless Steel SS

Levers and Knob to Suit 50 2 3 Brass levers and knobs also available refer page 3.100 20 69 89

162 Pull Handle to Suit

11 12 P1 Stainless Steel Stainless Steel Plates

22400NA 22500NA 22402NN 22406NN 22506NN 22407NN22507NN 22410NA 22413NN 22538NN

2 2AN1024 24 24 25 NN402NN402NN302AN1025 22405NN 22505NN 22414NN 22539NN

22420NA 22520NA 22422NN 22522NN

Legend Cylinder Hole Slotted Button LED

Turn-Snib Disabled Indicating Slotted Button

FIRE RATED DURABILITY

S3 HIGH SECURITY ANTI-CORROSION

Lockwood Product Catalogue Module (Version 1.4) 3.92 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture 212/224 Series Artefact Ordering Procedure

Ordering Procedure Sample part number 21201NA/96LSS is made up of several sections. Choose your product by selecting an option from each section. For example: 212 Series

Plate Type Plate Engraving Cylinder Lever/Knob/ Handing Finish Function Shape Pull Handle 212 01 N A / 96 L SS

Plate Type Plate Function Engraving Lever/ Knob Type Exterior Plate (162 x 50) Cylinder Only 00 A – G Outlined Infill 20 65 80 – Oval 212 R – X Full Infill Cylinder & Lever 01 20*2 66 83 Interior Plate (162 x 50) Male symbol A R Emergency Turn Only 02 32 67 90 – Oval 213 Male text B S Emergency Turn & Lever 03 44 71 92 Exterior Plate (162 x 50) Female symbol C T – Rectangular 224 Turn Knob & Lever 04 45 74 97 Female text D U Interior Plate (162 x 50) Lever Only 05 55 78 98*1 – Rectangular 225 Disabled symbol E V Turn Knob Only 06 55A 79 98*2 Push text F W Plain Plate 07 60 79B Pull text G X Dual Cylinder 10 Unisex symbol H Y AS1428.1 Compliant Levers Privacy Indicator 2 Emergency Turn Only 13 No option N 59 85 96* 2 Privacy Indicator Miscellaneous text* P 76 88* Emergency Turn & Lever 14 1 Corporate Engraving** Q 77 96* Privacy Indicator *Separate charge per letter Turn Knob Only 15 ** Separate charge per logo Handed Levers For all in-filled engraving, black gloss Privacy Indicator 41 53 61 Turn Knob & Lever 16 is the standard. Angled Levers Cylinder, Lever & LED 20 Cylinder Shape Cylinder, Fixed Lever & LED 21 98A Oval Cylinder – Lever & LED 22 32mm (H) x 18mm (W) Pull Handles Cylinder & LED 23 Lockwood 570 Cylinders A P1 P1*1 75*2 Pull Handle Only 24 Guarded Oval Cylinder – 32mm (H) x 18mm (W) Handles are brass unless indicated Pull Handle & Cylinder 25 Lockwood 570 Cylinders B otherwise *1 = Stainless Steel Pull Handle & No Cylinder Function N *2 = Aluminium Emergency Turn 26 Disabled Accessible Turn – Pull Handle & Turn Knob 27 Pentagon P Handing Pull Handle & Privacy Left Handed L Indicator Emergency Turn 28 Right Handed R Pull Handle & Privacy Door Furniture and General Hardware Indicator Turn Knob 29

Pull Handle & Dual Cylinder 30 Finish Flush Pull Only 31 Stainless Steel Finishes Flush Pull & Cylinder 32 Satin Stainless Steel SS Flush Pull & Emergency Turn 33 Polished Stainless Steel PS Flush Pull & Turn Knob 34 Powdercoat PC Flush Pull & Privacy Marine Grade MG Indicator Emergency Turn 35 Flush Pull & Privacy Aluminium Finishes Indicator Turn Knob 36 Natural Anodised NT Flush Pull & Dual Cylinder 37 Brass Finishes Plate Function - Handed Polished Brass PB Cylinder & Fixed Lever 08 Fixed Lever Only 09 Disabled Turn Only 38 Disabled Turn & Lever 39 Pull Handle & Disabled Turn 42

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.93 Plate Door Furniture Detention Series Furniture – Square Plate

Description A heavy duty plate designed for use in hospitals and detention facilities. Styled for institutional use, this plate has six fixing points to ensure that it is well secured to the door. Plates are designed to be free of ligature points. Application Lockwood 3570 Series Mortice Locks and Lockwood 3579 Secure Area Rated Locks. Features and Specifications • Anti-ligature • Covers fixing holes from existing Artefact 200 Series Furniture • Detention furniture turns feature a clutching mechanism that allows the cylinder to retract the bolt even if the turn knob is held from the inside. Dimensions 162mm x 180mm x 2mm: base plate 161mm x 75mm x 3mm: bevelled top plate Handing All plates are handed except 220D07 and Lever and Knob Selection 220D31, which are non-handed when ordered Standard Knob 21 Webbed Knob 22 Lever 23 without engraving. Materials Stainless steel Fixing • Six fixing points • 220D series plates have concealed fixings 25 3 33 • 221D series plates have visible fixings 25 33 3 Door Thickness 61 61 35 Ø60 35mm minimum, 45mm maximum ø60 35

For thicker doors, longer screws are required. Ø60 ø60

Note: A minimum door thickness of 50mm 120 120 is required to fit flush pulls back to back. Standard Finish Satin Stainless Steel SS

FIRE RATED DURABILITY

S3 HIGH SECURITY ANTI-CORROSION

Lockwood Product Catalogue Module (Version 1.4) 3.94 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture Detention Series Furniture – Square Plate Functions

220D00 220D01 220D02 220D03 220D04 220D05 220D06

220D07 220D08 220D09 220D13 220D14 220D15 220D16

220D20 220D21 220D22 220D23 220D24 220D25 220D26

220D27 220D28 220D29 220D31 220D32 220D33 220D34

220D35 220D36 220D56 220D57 220D58 220D59 220D60

220D61 220D62 220D63 220D64 220D65 220D66 220D67

Legend: Cylinder Hole Knob/Lever Fixed Knob/Lever Turn Snib Emergency Turn

Privacy Indicator Privacy Indicator LED Pull Handle Flush Pull Turn Snib Emergency Turn

Cylinder guards must be ordered separately. Only the plate functions shown above in red are Door Furniture and General Hardware available with engraving.

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.95 Plate Door Furniture Detention Series Furniture – Rectangular Plate

Description This smaller plate range has been designed for use in detention facilities such as hospitals where domestic aesthetics are preferred over institutional type styling. Plates are designed to be free of ligature points. Application Lockwood 3570 Series Mortice Locks and Lockwood 3579 Secure Area Rated Locks. Features and Specifications • Anti-ligature • Covers fixing holes from existing 212 Series Artefact Plates • Detention furniture turns feature a clutching mechanism that allows the cylinder to retract the bolt even if the turn knob is held from the inside. Dimensions 162mm x 76mm x 2mm: base plate 161mm x 75mm x 3mm: bevelled top plate Handing Only plates with levers and/or turn knobs Lever and Knob Selection are handed. Standard Knob 21 Webbed Knob 22 Lever 23 Materials Stainless steel Fixing • Four fixing points

25 • 222D series plates have concealed fixings 33 3 • 223D series plates have visible fixings 61 Door Thickness 35 35mm minimum, 45mm maximum Ø60 ø60 For thicker doors, longer screws are required. 120 Standard Finishes Satin Stainless Steel SS

FIRE RATED DURABILITY

S3 HIGH SECURITY ANTI-CORROSION

Lockwood Product Catalogue Module (Version 1.4) 3.96 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture Detention Series Furniture – Rectangular Plate Functions

222D00 222D01 222D02 222D03 222D04 222D05 222D06 222D07 222D08 222D09 222D13

222D14 222D15 222D16 222D20 222D21 222D22 222D23 222D24

Legend: Cylinder Hole Knob/Lever Fixed Knob/Lever Turn Snib Emergency Turn

Privacy Indicator Privacy Indicator LED Pull Handle Flush Pull Turn Snib Emergency Turn

Note: Only plates with levers and/or turn knobs are handed. 223D Series have visible fixings. Door Furniture and General Hardware

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.97 Plate Door Furniture Detention Series Furniture – Accessories

25 Knobs and Lever 3 Standard Knob 21 Simple yet functional, this knob has soft edges to minimise impact injuries and anti-ligature Ø60 features that make it suitable for use in detention facilities. 25 3

Webbed Knob 22 Ø60 33 The webbed knob combines pleasing aesthetics, comfortable grip and anti-ligature features to ø60 provide a solution for any environment.

Detention Lever 23 Ergonomically designed to maximise ø60 grip, the detention lever is suitable for use in hospitals and minimum security applications. It caters especially for the elderly or people with arthritic conditions.

61 35

120120 Turns Emergency Turn Turn Knob 3

42 42

Indicating Emergency Turn Indicating Turn Knob

42 42

Lockwood Product Catalogue Module (Version 1.4) 3.98 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture Detention Series Furniture – Accessories

Pulls 121 Flush Pull The detention flush pull has been designed to maximise grip and eliminate the possibility of hiding objects in the cavity. 35

Standard Pull The detention pull allows for a firm grip and can be used to open heavy doors. Also designed to 40 be free of hanging points.

R10 161 30

Cylinder Guards Part Number Door Thickness Suitability

Description 220D00/40SS Suit doors 35-40mm Cylinder guards must be fitted with any cylinder 220D00/45SS Suit doors 40-45mm plate function. Guards are available to suit different door thicknesses. 220D00/50SS Suit doors 45-50mm 220D00/55SS Suit doors 50-55mm

220D00/60SS Suit doors 55-60mm

Fixing Screws Torx anti-tamper, snake-eye and standard Part Number Description Door Thickness Suitability screws are available in accessory packs to 220D11/45 Torx Anti-tamper Screws 35 - 45mm suit different door thicknesses. Only standard 220D11/55 Torx Anti-tamper Screws 45 - 55mm

screws to suit doors 35mm – 45mm thick Door Furniture and General Hardware 220D11/65 Torx Anti-tamper Screws 55 - 65mm are supplied with furniture. Other variations need to be ordered separately using part 220D12/45 Standard Screws 35 - 45mm numbers specified. 220D12/55 Standard Screws 45 - 55mm

220D12/65 Standard Screws 55 - 65mm All accessory packs contain six screws. 220D13/50 Snake-eye Screws 35 - 50mm

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.99 Plate Door Furniture Detention Series Furniture Ordering Procedure

Ordering Procedure Sample part number 220D01NA/21LSS is made up of several sections. Choose your product by selecting an option from each section. For example:

Plate Function Engraving Cylinder Lever/ Handing Finish Options Options Knob 220 D 01 N A / 21 L SS

Plate Flush Pull and Privacy Lever/Knob Finish Indicator Emergency Turn 35 Concealed Fix Flush Pull and Standard Knob 21 Satin Stainless Steel SS 162mm x 180mm 220 Privacy Indicator Turn Snib 36 Webbed Knob 22 Visible Fix Pull Handle and Lever 23 Note: Cylinder guards must 162mm x 180mm 221 Knob/Lever 56 be ordered with all cylinder Concealed Fix Pull Handle, Cylinder and Handing function plates. All turn 162mm x 76mm 222 Knob/Lever 57 snib functions are supplied Left Handed L Visible Fix Pull Handle, Emergency Turn with tailbars and clutching mechanisms as standard. 162mm x 76mm 223 and Knob/Lever 58 Right Handed R For no tailbar and clutching Pull Handle, Turn Snib and insert ‘N’ after function number Function Knob/Lever 59 e.g. 220D06NNNLSS Cylinder Only 00 Pull Handle, Privacy Indicator Cylinder and Lever/Knob 01 Emergency Turn and Knob/Lever 60 Emergency Turn Only 02 Pull Handle, Privacy Indicator Emergency Turn and Lever 03 Turn Snib and Knob/Lever 61 Turn Snib and Lever/Knob 04 Flush Pull and Lever/Knob 62 Lever/Knob Only 05 Flush Pull and Cylinder and Turn Snib Only 06 Lever/Knob 63 Plain Plate 07 Flush Pull and Emergency Turn Cylinder and Fixed and Lever/Knob 64

Lever/Knob 08 Flush Pull and Turn Snib and

Lever/Knob 65 Fixed Lever/Knob Only 09 Privacy Indicator Flush Pull and Privacy Emergency Turn Only 13 Indicator Emergency Turn Privacy Indicator Emergency and Lever/Knob 66 Turn and Lever/Knob 14 Flush Pull and Privacy Indicator

Privacy Indicator Turn Snib and Knob/Lever 67

Turn Snib Only 15 Engraving Options Privacy Indicator Turn Snib and Lever/Knob 16 Male Symbol A R Cylinder, Lever/Knob and LED20 Male Text B S Female Symbol C T Cylinder, Fixed Lever/Knob Female Text D U and LED 21 Disabled Symbol E V Lever/Knob and LED 22 Push Text F W Cylinder and LED 23 Pull Text G X Unisex Symbol H Y Pull Handle Only 24 No Option N Pull Handle and Cylinder 25 Miscellaneous Text* P Pull Handle and Corporate Engraving** Q

Emergency Turn 26 *Separate charge per letter

Pull Handle and Turn Snib 27 **Separate charge per logo

For all in-filled engraving, black Pull Handle and Privacy Indicator Emergency Turn 28 gloss is the standard. A-G Outlined Infill Pull Handle and Privacy R-X Full Infill Indicator Turn Snib 29 Flush Pull Only 31 Cylinder Options

Flush Pull and Cylinder 32 Australian Oval A Flush Pull and No Cylinder N Emergency Turn 33 Flush Pull and Turn Snib 34

Lockwood Product Catalogue Module (Version 1.4) 3.100 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture Palladium® Series Overview

The exceptional range of Palladium Door Furniture offers builders, specifiers and interior designers an array of levers that can be used in any residential environment. The Palladium Series of door furniture reflects the best in quality, blended with sophisticated designs. The Palladium Series was produced to meet the rigorous aesthetic requirements of residential markets, while conforming to the ever increasing need for quality semi-commercial building segments. Available in Palladium and Palladium Xtra versions to suit a wide range of applications.

Summit® L1 Spire® L2 Element™ L3 Glide™ L4 Aria® #27 Door Furniture and General Hardware

Hakea® #28 Acacia® #29 Saltbush® #34 Mulga® #36 Gidgee® #37

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.101 Plate Door Furniture Palladium® Series Door Furniture

The Palladium Series represents the highest standard in residential and semi-commercial door hardware and is brought to you through modern innovative designs, combined with quality manufacturing. A wide range of lever options is available to enable a common style throughout the home. Features and Specifications Dimensions 222 x 30 x 9mm Handing Easy, field selectable handing. Materials All plates and levers in the Palladium Series are constructed from solid zinc die-cast. Fixing Lockwood Palladium Series Door Furniture is a complete set, supplied with both the internal and external plates. Plates are designed to fit back to back to be fully concealed externally. Door Thickness Minimum 32mm – maximum 45mm door thickness. 85mm Plates and Functions Keying For use with Optimum Mortice Locks. Use with Euro profile cylinder. Finishes 85 Satin Chrome Pearl SP Chrome Plate CP Gold Plate GLD Black BLK PL2/85/## PL3/85/## PL4/85/## Polyester Powdercoat PPC Note: The internal single cylinder configuration is also used in the Palladium French Door 2/85 3/85 4/85 (Specify Dulux Color) kits (PLFD/85/##) only in this configuration the external lever is fixed.

No Pitch Plates

30 For use with passage functions.

222

PL1/00/## PL5/00/##

## Represents lever style number. 1/00 4/00

2/85

Lockwood Product Catalogue Module (Version 1.4) 3.102 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture Palladium® Xtra Furniture

The Palladium Xtra Series is designed specifically for the Optimum range of mortice locks to increase functionality enabling both internal snibbing for safety mode and lock status indication. Palladium Xtra is suitable for use in residential buildings, apartments and semi-commercial applications. Features and Specifications Dimensions 222 x 30 x 9mm Handing Easy, field selectable handing. Materials All plates and levers in the Palladium Series are constructed from solid zinc die-cast. Fixing Lockwood Palladium Xtra door furniture is a complete set, supplied with both the internal and external plates. Plates are designed to fit back to back to be fully concealed externally. Door Thickness 85mm Plates and Functions Minimum 32mm – maximum 45mm door thickness. Keying Use with Euro profile cylinder. Finishes

Satin Chrome Pearl SP PX4/85/## Black BLK 4/85 Chrome Plate CP ## Represents lever style number. Polyester Powder Coat PPC Door Furniture and General Hardware

222

2/85

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.103 Plate Door Furniture Palladium® Series Door Furniture

Summit® L1 Hakea® #28

32-45 32-45 30 61 61 30 66 66

222 222

113 110 Spire® L2 Acacia® #29

32-45 32-45 30 61 61 30 60 60

222 222

115 111 Element™ L3 Saltbush® #34

32-45 32-45 30 58 58 30 68 68

222 222

110 109 Glide™ L4 Mulga® #36

32-45 30 60 60 32-45 30 67 67

222 222

109 113 Aria® #27 Gidgee® #37

32-45 32-45 30 52 52 30 57 57

222 222

112 113

Lockwood Product Catalogue Module (Version 1.4) 3.104 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture Palladium® Series Ordering Procedure

Ordering Procedure Sample part number PL4/85/34SC is made up of several sections. Choose your product by selecting an option from each section. For example: Palladium

Platform Function Pitch Lever Finish Name PL 4 / 85 / 34 SP

Platform Name Pitch Finish

Palladium PL Lever Only 00 Chrome Plate CP 85mm Pitch 85 Gold Plate GLD Function Satin Chrome Pearl SP Lever Passage Set 1 Black BLK External Single Cylinder 2 Summit L1 Polyester Powder Coat PPC Internal Single Cylinder 3 Spire L2 Double Cylinder 4 Element L3 Fixed Dummy 5 Glide L4 French Door FD Aria 27 Hakea 28 Acacia 29 Saltbush 34 Mulga 36 Gidgee 37

Palladium Xtra

Platform Function Pitch Lever Finish Name PX 4 / 85 / 34 SP

Platform Name Pitch Finish

Palladium Xtra PX 85mm Pitch 85 Satin Chrome Pearl SP Black BLK Door Furniture and General Hardware Function Lever Chrome Plate CP Double Cylinder 4 Summit L1 Polyester Powder Coat PPC Spire L2 Element L3 Glide L4 Aria 27 Hakea 28 Acacia 29 Saltbush 34 Mulga 36 Gidgee 37

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.105 Plate Door Furniture Brass Furniture Thicker Door Accessories

Lockwood brass door furniture is suitable use across a wide range of door thicknesses. In certain applications longer screws, spindles and turnsnib tailbars may be required. Screws

Part Pack Length Threaded Door Thickness Number Size (A) Length (B) Min Max

SPA20-V3 NSS 20 65mm 40mm 32mm 50mm

SP0655MBK 10 75mm 40mm 42mm 60mm

SP1800-608ZP 10 120mm 75mm 52mm 105mm

SP1800-208SS 10 215mm 125mm 97mm 200mm

Note: Item shown is red is the standard screw that is supplied with furniture. Consideration should be given to screw finish on furniture platforms featuring visible fixing. Mortice Lock Spindles

Part Number Pack Length Door Thickness Size (A) Min Max

SP3570-5018 10 33mm 35mm 50mm

SP3570-5228 10 45mm 50mm 75mm

SP3570-5238 1 58mm 75mm 100mm

Note: Item shown is red is the standard screw that is supplied with furniture. In thicker door scenarios when Lockwood Brass Door Furniture is used with Lockwood Synergy Series Mortice Locks longer spindles may be required. Turnsnib Tailbars The door thickness range for a turnsnib tailbar will depend on whether the turn is in a cylinder and turn configuration or a privacy (turn and turn) configuration

Part Number Pack Size Length

SP571-38ZP 10 47mm

SP571-138ZP 1 98mm

Note: Item shown is red is the standard tailbar that is supplied with furniture.

Lockwood Product Catalogue Module (Version 1.4) 3.106 1300 LOCK UP (1300 562 587) lockweb.com.au Plate Door Furniture Dulux Powdercoat Range

Colour Swatches

50279 33344 36603 32786 81880 Dulux Wedgewood Satin Dulux Horizon Blue Gloss Dulux Azure Grey Satin Dulux APO Grey Satin Dulux Pearl White Gloss

36858 33704 33662 32774* 32999* Dulux Oyster Matt Dulux Tropics Gloss Dulux Pottery Satin Dulux Claret Satin Dulux Charcoal Gloss

33149 51032 32694* 19319* 19930* Dulux Red Earth Gloss Dulux Old Mauve Satin Dulux Black Gloss Dulux Black Matt Dulux Anodic Bronze Satin

50068* 52052* 18796* 51275 32538 Dulux Deep Brunswick Dulux Precious Pearl Dulux Charcoal Dulux Anotec Dark Dulux Stone Beige Matt Green Gloss Gloss Met Pearl Gloss Grey Matt

The colours represented on this chart are as close to the actual colours as modern printing processes allow.

* Technical advice should be sought, where severe ultraviolet exposure conditions exist.

Note: Consideration should be given to match cylinder finish. Dulux Lock Bronze Powdercoat recommended as an alternative to the discontinued Florentine Bronze Plated Finish. Door Furniture and General Hardware

Lockwood Product Catalogue Module (Version 1.4) 1300 LOCK UP (1300 562 587) lockweb.com.au 3.107 Plate Door Furniture Combination Finish Selection Guide

The following door furniture series are available When selecting a colour option from the in combinations finishes: Symphony finish combination table, please • 1220 Series refer to the following code to establish your • 1420 Series preferred finish selection. • 1800 Series Retainer/ Lever/ Rose Plate Turn • 2800 Series 1 2 3 Lever Handle Set Lever Handle Set F03 = CP / PB / CP 1 Rose 2 Retainer Plate Furniture F03 = N/A / PB / CP

3 Lever Escutcheon F03 = CP / PB / N/A

Round Escutcheon F03 = CP / PB / CP

Blank Rose F03 = CP / PB / CP

Mortice Lock and Latch Set Turnknob F03 = CP / PB / CP Plate Furniture* Emergency Release F03 = CP / PB / CP

1 Trim

2 Plate 2 Plate Finish Options Finish Combinations Where PC indicated, nominate colour selected.

F02 PC / PB / PC 3 Lever 3 Lever F03 CP / PB / CP F04 PC / CP / PC F05 PB / CP / PB Escutcheons F07 PB / PC / PB Round Escutcheon* F08 CP / PC / CP 1 Rose F09 SB / SC / SB F10 SC / SB / SC 2 Retainer F15 SC / PB / SC F16 SC / PC / SC F19 CP / PC / CP Blank Rose F22 PB / SC / PB 1 Rose F23 PB / SB / PB F25 PC / SC / PC 2 Retainer F27 PC / SB / PC F30 SB / PB / SB

Turnknob F31 SB / PC / SB F32 SB / CP / SB 1 Rose F38 CP / SC /CP 2 Retainer 3 Turnknob F40 CP / SB / CP F64 SC / CP / SC F65 PC / SC / SC Emergency Release F67 PC / PB / PB F70 CP / PB / PB 1 Rose F71 CP / CP / SC 2 Retainer 3 Emergency Turnknob F72 CP / PB / SC F73 PB / PB / CP F74 PB / CP / CP F75 SC / PB / PB 1 Rose * Consideration should be given to cylinder colour. F83 PB / SC / SC 2 Retainer 3 Turnknob Lockwood Product Catalogue Module (Version 1.4) 3.108 1300 LOCK UP (1300 562 587) lockweb.com.au ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience

Lockwood is the leading brand in the Australian locking industry. With an established reputation for high quality products, this iconic brand provides a wide range of locking solutions to residential housing, commercial building and industrial application markets. Lockwood is supported by an extensive distribution and after-sales support network. Our customers include retailers, architects, trade and industrial personnel, locksmiths and security dealers.

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America. As the world’s leading lock group, ASSA ABLOY offers a more complete product range of door opening solutions than any other company in the market.

Australia 1300 LOCK UP (1300 562 587) lockweb.com.au New Zealand Telephone +64 9415 7111 assaabloy.co.nz

ASSA ABLOY Australia Pty Ltd ASSA ABLOY New Zealand Ltd 235 Huntingdale Road 6 Armstrong Road Oakleigh, Victoria, 3166 Albany, North Shore City, 0632 Australia New Zealand [email protected] [email protected] assaabloy.com.au assaabloy.co.nz Levers and Knobs Door Furniture and General Hardware

Levers and Knobs

Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au 3.110 Levers and Knobs Brass Levers and Knobs

Finger clearance is defined as the clearance For use on the following door furniture series: between the lever and the base of the rose or • 1220 Series plate at the centre of the lever. The tables below • 1420 Series are calculated using an assembled plate/rose • 1360 Series thickness of 12.5mm. Due to different bearing • 1370 Series bush, the projection and finger clearance of • 1800 Series levers in the 4800/5800 Series is 2.5mm larger • 2800 Series than the value shown (except Lever 90). • 4800 Series • 5800 Series • Artefact Series II Furniture

Knob 20

Dimensions

Diameter 50mm 50 Projection 73mm

Not compatible with Symphony roses 60.5

Lever 32 17.5 Dimensions 40.5

Length 107.5mm

Projection 53mm

Finger clearance 35.5mm 95.3

107.5

Knob 40

Dimensions 48 Diameter 48mm

Projection 54.5mm 42 Not compatible with Symphony roses

21 Intermezzo 41 49

Dimensions

Length 130mm

Projection 61.5mm 40

Finger clearance 40.5mm

120 *Lever is an asymmetrical design and

therefore must be handed. 130

Lockwood Product Catalogue 3.111 1300 LOCK UP (1300 562 587) lockweb.com.au Levers and Knobs Brass Levers and Knobs

Arpeggio 44 17.5 Dimensions 47

Length 125mm

Projection 59.5mm

Finger clearance 42mm

104

125

Sonata 45

Dimensions 44.5

Length 117.5mm

Projection 57mm

Finger clearance 40mm 107

117.5

Nocturne 48

28 Dimensions 17.2 52.5

Length 125mm

Projection 65mm

Finger clearance 37mm 44

*Lever is an asymmetrical design and therefore must be handed. 114

125

Capella 50

Dimensions 22.2 50

Length 124mm Door Furniture and General Hardware

Projection 62.5mm

Finger clearance 40.3mm

*Lever is an asymmetrical design and 102.5 therefore must be handed. 124

Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au 3.112 Levers and Knobs Brass Levers and Knobs

Veloce 53

28.5 Dimensions 61 Length 123mm

Projection 73.5mm

Finger clearance 45mm

*Lever is an asymmetrical design and 112.5 therefore must be handed. 123

Lever 55

Dimensions 22.2 50 Length 124mm

Projection 62.5mm

Finger clearance 40.3mm

103

124

Overture 59

6.5 Dimensions 45

Length 121mm

Projection 57.5mm

Finger clearance 51mm 22

110

121

Lever 62 25

Dimensions 55

Length 127.5mm

Projection 67mm 13

Finger clearance 42mm 115

127. 5

Lockwood Product Catalogue 3.113 1300 LOCK UP (1300 562 587) lockweb.com.au Levers and Knobs Brass Levers and Knobs

Lever 70

Dimensions 36

Length 121mm

Projection 53.6mm 15.9

Finger clearance 37.7mm 113

121

Tempo 71

Dimensions 50 Length 118mm

Projection 62mm

Finger clearance 44.5mm 17

110

118

DAINTREE - dimensionals BRASS - dimensionals Ving 74 Dimensions 10 33.538 Length 120mm

Projection 56mm

Finger clearance 48mm 26

116109 120 124

Cadenza® 78 22

Dimensions 52

Length 118mm Door Furniture and General Hardware Projection 52mm 11 Finger clearance 30mm

105

116

DAINTREE - price book style BRASS - price book style

Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au 3.114 Levers and Knobs Brass Levers and Knobs

DAINTREE - dimensionals BRASS - dimensionals Tenor 79® 10 Dimensions 38

Length 124mm

Projection 50.5mm 26

Finger clearance 40.5mm 116

124

22 Lever 79B 52 10 Dimensions 38

Length 118mm 11 Projection 50.5mm 105 26 Finger clearance 40.5mm 116 108

118

Lever 80 9 DAINTREEDimensions - price book style BRASS - price book style 34

Length 121mm

Projection 46.5mm

Finger clearance 37.5mm 114.3

123

Lever 83

Dimensions 28.5 49.5 Length 112mm

Projection 62mm

Finger clearance 33.5mm

101.5 112

Lockwood Product Catalogue 3.115 1300 LOCK UP (1300 562 587) lockweb.com.au Levers and Knobs Brass Levers and Knobs

Lever 90

6.8 Dimensions 39.5

Length 118.5mm

Projection 52mm 25 Finger clearance 45.2mm 106

118.5

Lever 91

6.8 Dimensions 39.5

Length 115mm

Projection 52mm 25 Finger clearance 45.2mm 103

115

Lever 94

Dimensions 38

Length 120mm 17 Projection 50.5mm 15.9 Finger clearance 34.6mm 112 *Lever is an asymmetrical design and 120 therefore must be handed.

Chorus Line 97

Dimensions 38

Length 120mm 17 Door Furniture and General Hardware Projection 50.5mm 15.9 Finger clearance 34.6mm 112

120

Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au 3.116 Levers and Knobs Diecast Levers

For use on the following door furniture series: • Daintree Series • Palladium • Velocity (Levers L1, L2, L3 and L4 only) • Nexion Locksets

Hakea® #28 121 Dimensions 110

Length 121mm 13

Projection 62mm

Finger clearance 42mm 22 50 *Design Registered Australia/New Zealand

Acacia® #29 122 Dimensions 111

Length 122mm 18

Projection 56mm

Finger clearance 41mm 15 44 *Design Registered Australia/New Zealand

Saltbush® #34 120 Dimensions 109 7 Length 120mm

Projection 64mm

30 Finger clearance 41mm 52 *Design Registered Australia/New Zealand

Lockwood Product Catalogue 3.117 1300 LOCK UP (1300 562 587) lockweb.com.au Levers and Knobs Diecast Levers

® Aria #S27 123 112 Dimensions 18 Length 123mm

Projection 48mm

Finger clearance 36mm 10 36 *Design Registered Australia/New Zealand 36 12

Mulga® #36 123 114 Dimensions

Length 123mm 16

Projection 63mm

Finger clearance 47mm 30 51 *Design Registered Australia/New Zealand

Gidgee® #37 122 113 Dimensions 16 Length 122mm

Projection 53mm

Finger clearance 37mm 35 41 *Design Registered Australia/New Zealand

Summit® #L1 124 Dimensions 114

Length 124mm 11

Projection 57mm Door Furniture and General Hardware

Finger clearance 37mm 24 45 *Design Registered Australia/New Zealand

Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au 3.118 Levers and Knobs Diecast Levers

® Spire #L2 126 115 Dimensions 19 Length 126mm

Projection 57mm

Finger clearance 41mm 21 45 *Design Registered Australia/New Zealand

Element™ #L3 122 110 Dimensions

Length 122mm 23

Projection 54mm

Finger clearance 47mm 7 *Design Registered Australia/New Zealand 42

Glide™ #L4 121 Dimensions 110

Length 121mm 8

Projection 56mm

Finger clearance 34mm 23 *Design Registered Australia/New Zealand 44

Lockwood Product Catalogue 3.119 1300 LOCK UP (1300 562 587) lockweb.com.au ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience

Australia 1300 LOCK UP (1300 562 587) lockweb.com.au

New Zealand +64 9415 7111 assaabloy.co.nz

ASSA ABLOY Australia Pty Ltd ASSA ABLOY New Zealand Ltd 235 Huntingdale Road 6 Armstrong Road Oakleigh, Victoria, 3166 Albany, North Shore City, 0632 Australia New Zealand

[email protected] [email protected] assaabloy.com.au assaabloy.co.nz