Planning Guide

Home , Door

PERLICK CR24 COLUMN REFRIGERATION PLANNING GUIDE ALL THE DELICIOUS DETAILS OF THE NEW PERLICK CR24 COLUMN REFRIGERATION Enjoy the flexibility of Perlick column refrigeration by mixing and matching units to create custom storage for food, wine and beverages. Columns can be installed individually or installed side-by-side in a pair or more to serve any sized kitchen.

The following provides installation guidance for planning your space. For complete installation instructions, please refer to the column installation guide on perlick.com/residential.

3 CR24 MODEL LIST

3 CR24 ACCESSORY LIST

4 DOOR OVERLAY TEMPLATES

4 OVERLAY, SOLID DOOR

5 OVERLAY, GLASS DOOR

6 INSTALLATION

7 OPENING DIMENSIONS, SINGLE INSTALL

7 OPENING DIMENSIONS, DUAL INSTALL

8 OPENING DIMENSIONS, TRIPLE INSTALL CR24 COLUMN REFRIGERATION ACCESSORIES A B CR24 COLUMN REFRIGERATION ACCESSORIES A CR-PRO-HANDLE CR-SG-24PDL/R CR-SS-24PDL/R CR-ACC-TRIM CR-ACC-D2N CR-ACC-D1N CR-ACC-D1 CR-ACC-24SEPR/L SINGLE ZONE CR24W COLUMN WINERESERVE, CR24R COLUMN REFRIGERATOR CR24W-1-4R CR24W-1-4L CR24R-1-2R CR24R-1-2L

CR24R COLUMN REFRIGERATOR customer-supplied doorpanel) Two Tone Perlick Pro Handle(whensoldseparately for usewith (left orright hinge - available for 4"or6" toe kicks) Stainless Steel Glass DoorPanel w/Two Tone Perlick Pro Handle (left orright hinge - available for 4"or6" toe kicks) Stainless Steel SolidDoorPanel w/Two Tone Perlick Pro Handle columns) Built-in Trim Kit(left andright finishtrimkit forbuilt-in No Heater, Column Dual Installation Kit,Hinge To Handle,2Inch Trim, No Heater, Column Dual Installation Kit,Handle-To-Handle OrHinge-To-Hinge, With Heater, Column Dual Installation Kit,Handle-To-Handle OrHinge-To-Hinge, exposed column) Stainless Steel Exterior FinishingPanels (for left orright sideof Hinged Right Wine Reserve, SingleZone, GlassOverlay Door, Hinged Left Wine Reserve, SingleZone, GlassOverlay Door, All Refrigerator, SolidOverlay Door, Hinged Right All Refrigerator, SolidOverlay Door, Hinged Left

A CR24F COLUMN FREEZER FACTORY INSTALLED

FIELD INSTALLED CR24D COLUMN WINERESERVE, CR24F COLUMN FREEZER DUAL ZONE CR24F-1-2R CR24F-1-2L CR24D-1-4R CR24D-1-4L •

CR24W

• • • • • • • COLUMN SINGLE-ZONE WINE RESERVE All Freezer, SolidOverlay Door, Hinged Right All Freezer, SolidOverlay Door, Hinged Left Hinged Right Wine Reserve, DualZone, GlassOverlay Door, Hinged Left Wine Reserve, DualZone, GlassOverlay Door, require adedicated outlet. condensation anddoesnot the unitsto prevent The heat mat isinstalled between (CR-ACC-D1) isrequired. column, adualinstallation kit with arefrigerator orwine If installing afreezer side-by-side INSTALLATIONS FOR MULTI-UNIT HEAT MAT REQUIREMENTS

CR24D COLUMN DUAL-ZONE WINE RESERVE 3 DOOR OVERLAY PANELS Perlick CR24 column refrigeration comes ready to accept a customer-supplied door overlay panel and customer-supplied handle. A minimum 5/8" thick panel is required, however, the thickness can increase provided the panel does not exceed a weight of 65 lbs. The depth of each model is 24" without a finished overlay, so be sure to allow for panel thickness when planning the finished opening depth.

This guide includes solid and glass door templates with 4" and 6" toe kicks. Please note that when installing a panel thicker than 3/4", a 90° stop may be required to prevent damage to both the unit and surrounding cabinetry.

SOLID DOOR OVERLAY TEMPLATE SOLID DOOR OVERLAY TEMPLATE

FOR 4" TOE KICK FOR 6" TOE KICK Measurements shown in inches (") Measurements shown in inches (")

16-1/8" 16-1/8" 14-3/8" 14-3/8" 1-3/4" 9-3/8" 9-3/8" 2-1/4" Ø 1/8" 1/2" (4X) 1-3/4" Ø 1/8" 1/2" (4X) 7-5/8" 2-1/4" 7-5/8"

12-1/2" 12-1/2" A B

36-1/2" 3/8" 36-1/2" 3/8"

60-1/2" 60-1/2"

77-7/8" 3/8" 79-7/8" 3/8"

Ø 3/16" 1/4" (12X)

3/8" 3/8"

Ø 1/8" 1/4" (2X) Ø 1/8" 1/4" (2X)

6-3/4" 4-7/8"

1-3/4" 11-7/8" 1-11/16" 11-7/8" 3/4" 3/4" 2-1/16" 19-5/8" 2-1/16" 2-1/16" 19-5/8" 2-1/16" 23-3/4" 23-3/4"

OVERLAY CLIP Ø 1/8" 1/2" (6X) DETAIL A& B

REVEALS Reveals between panels can vary — 1/8" is the minimum. As reveals between cabinetry and the unit decrease, severe finger pinching can occur while the Ø 3/16" 1/2" (6X) door is closing.

4 GLASS DOOR OVERLAY TEMPLATE GLASS DOOR OVERLAY TEMPLATE FOR 4" TOE KICK FOR 6" TOE KICK Measurements shown in inches (") Measurements shown in inches (")

16-1/8" Ø 1/8" 1/2" (4X) 14-3/8" 16-1/8" Ø 1/8" 1/2" (4X) 9-3/8" 14-3/8" 1-3/4" 2-1/4" 7-5/8" 1-3/4" 9-3/8" 3/4" 2-1/4" 7-5/8" 3/4" 6-5/8" 6-5/8" 12-1/2" 12-1/2" A B 3/8" 3/8" 36-1/2" Ø 1/8" 36-1/2" Ø 1/8" 1/2" 1/2" (12X) (12X)

60-1/2" 60-1/2"

60" 60" 79-7/8" 3/8" CUTOUT CUTOUT 77-7/8" 3/8"

3/8" 3/8" 3-3/8" 17" CUTOUT 3-3/8" 17" CUTOUT

6-3/4" Ø 1/8" 1/2" (4X) 4-7/8"

1-11/16" 11-7/8" 1-3/4" 11-7/8” Ø 1/8" 1/2" (2X) 2-1/16" 19-5/8" 2-1/16" 19-5/8" 23-3/4" 23-3/4"

23-3/4"

3-1/16" 3-1/16" 3/4" 3-1/4"

SCREW ZONE FOR DOOR OVERLAY TEMPLATES Shaded areas (shown right) should provide enough thickness for wood screws for overlay attachment bracket. 66" 69-1/2"

Door handle must be attached to overlay panel prior to installing panel onto the unit. Mounting screws for the handle should be recessed or countersunk into the back side of the overlay panel. 3"

C L CL

11-3/8" 1" Measurements shown in inches (")

5 INSTALLING PERLICK COLUMN REFRIGERATION Designed specifically to be integrated into cabinetry, Perlick column refrigeration brings commercial-grade performance and preservation to any style of kitchen. Columns can be installed separately, or in side-by-side installations to create custom modular refrigeration.

The following diagrams show various ways to install Perlick column refrigeration and provide information on producing custom overlay panels.

ADJACENT WALL MINIMUM CLEARANCE REQUIREMENTS

If installing column next to adjacent wall, 48" take care to observe minimum required clearances to avoid inteference when

opening the door. Regardless of handle, a 2" 15" clearance is required if door opens towards 4-1/8" a wall. Please note the clearances indicated ADJACENT WALL OR STRUCTURE are based on a standard 3/4" thick door panel and Perlick Two Tone Pro Handle 27-13/16" 27-3/4" (CR-PRO-HANDLE). Varying door depths STRUCTURE STRUCTURE CLEARANCE and dimensions of customer-provided CLEARANCE 115° FULLY OPEN handle may change the required dimensions. 90° OPEN

Measurements shown in inches (") A 90° hinge stop pin (included with unit) can be installed to prevent the door from opening beyond 90°. Pin must be installed prior to full integration. See installation manual for instructions.

6 OPENING DIMENSIONS FOR A SINGLE UNIT Perlick columns allow you the

freedom to install refrigeration 24-3/4" OVERALL separately anywhere in the kitchen. 24" TO FRONT OF DOOR FRAME

Columns are designed to be

integrated into cabinetry, however, 23-3/4" factory installed stainless steel side OVERALL 3/4" OVERLAY 25" panels are available for installations where the side of the column is exposed. 84"

24"

83-7/8" TO 22-1/8" TO TOP OF OVERLAY SIDE CABINET WALL 4" - 6" TOE KICK CABINET

21-9/16" TO 4" DOOR GRILL

24" FRAME FACE Measurements shown in inches (")

OPENING DIMENSIONS FOR INSTALLING TWO UNITS SIDE-BY-SIDE Perlick columns can be installed side-by-side in a variety of configurations provided the following installation specifications are met. Hinge/handle locations and adjacency to walls/structure must be taken into consideration during the planning process. Choose your desired column configuration on the left and match to the opening (blue label) drawing on the right for the proper cutout dimensions (applies to units installed both with or without dual installation kit.)

47-3/4" 48" 49-3/4" 1/4" 47-3/4"

1/4" A. HANDLE TO HANDLE B. HINGE TO HINGE (A & B) (C) 84" 84" 49-1/2" OPENING OPENING

90°

*90° HINGE PIN Doors open to 105°. The 2" 90° hinge pin stop can be installed. If hinge pin is 12" 10" 12" 12" 10" 12" C. HANDLE TO HINGE* installed, all gaps between cabinets can be 1/2".

If using hinge pins on all Measurements shown in inches (") units, refer to Opening Dimensions A & B.

7 OPENING DIMENSIONS FOR INSTALLING THREE UNITS SIDE-BY-SIDE As with dual installations, choose your desired column configuration below and match to the opening (blue label) drawing for the proper cutout dimensions (applies to units installed both with or without dual installation kit.)

For installations involving more than three cabinets, combine the opening dimensions for the openings which correspond to the combined Hinge and Handle combinations shown in this guide.

75-1/4" 71-3/4" 49-1/2" 48" 2" 2" 1/4" 1/4"

90° D. HINGE CONFIGURATIONS No cabinets physically joined E. HINGE CONFIGURATIONS All cabinets physically joined together in this configuration together in this configuration LEFT - LEFT- LEFT LEFT - RIGHT- LEFT RIGHT - RIGHT - RIGHT RIGHT - LEFT - RIGHT *90° HINGE PIN Doors open to 105°. The 90° hinge pin stop can be installed. If hinge pin is 73-1/2" 73-1/2" installed, all gaps between 2" 1/4" 1/4" 2" cabinets can be 1/2". If using hinge pins on all units, refer to Opening Dimensions E.

F. HINGE CONFIGURATIONS (2) cabinets physically joined G. HINGE CONFIGURATIONS (2) cabinets physically joined together in this configuration together in this configuration LEFT - LEFT - RIGHT RIGHT - LEFT - LEFT RIGHT - RIGHT - LEFT LEFT - RIGHT - RIGHT

74" 75-3/4" 72-1/4"

(D) (E) (F & G) OPENING OPENING OPENING 84" 84" 84"

36-1/2" 37-1/4" 38"

12" 10" 12" 12" 10" 12" 12" 10" 12"

Measurements shown in inches (")

Visit perlick.com/residential for the latest information on how to install Perlick CR24 column refrigeration. To purchase Perlick accessories, contact your local Perlick Residential dealer.