Wallcovering Conversions

Total Page：16

File Type：pdf, Size：1020Kb

Wallcovering Conversions COMMERCIAL GOODS (52”/54”) WIDTH Linear yard = 13.5sf (4.5’ x 3’) HEIGHT Square yard = 9 sf (3’ x 3’) Roll = 30 linear yards Coverage per 30 yard roll = 405sf HOW TO CALCULATE THE DIMENSIONS OF YOUR WALLS CONVERSIONS (52”/54”) Calculation for Square Feet to Linear Yards (52”/54” Wide) 1. Multiply Width by Height of Wall = Total Square Feet (per wall) Figuring Square Footage: Length of Wall multiplied by Height of Wall. 2. Repeat Step 1 per Wall Needing Wallcovering Convert Square Feet to Linear Yards: 3. Add Together Total Square Feet of ALL Wall Measurements = Total Square Feet of Project Divide total square footage by 13.5 = number of yards Divide by 12 to include waste or 9 for patterns with large repeats. 4. Total Square Feet of Project and Divide by factor: 13.5 = NO Waste/Overage Convert Square Yards to Linear Yards: 12 = Waste/Overage Added Multiply square yard quantity by 9, then divide the result by 13.5. 9 = Large Repeat (18” or Larger) Divide by 12 to include waste or 9 for patterns with large repeats. 5. Calculation in Step 4 = Total Linear Yards for Project Convert to Square Yards: Divide number of linear yards by 13.5 then multiply result by 9. Dividing Factors for Wallcovering (52”/54” Wide) Convert Linear Feet to Linear Yards: 1. 13.5 = Total of wallcovering (No overage or waste) Divide number of linear feet by 3 = number of linear yards. 2. 12 = Total of wallcovering (Includes waste) Convert Square Meters to Square Yards: 3. 9 = Total of wallcovering with large repeat (18” or more) 1 Square meter = 1.19599 Square Yards. Calculation for Square Meter to Linear Yards (52”/54” Wide) Price per square foot conversions: 1. Square Meter multiplied by 1.19599 = Total Square Yards Divide the price per linear yard by 13.5 = price per SF 2. Total Square Yards multiplied by 9 then divide by factor 12 (Use to compare costs to paint or tile that is priced by the square foot.) = Total Linear Yards (Dividing by factor 12 includes waste).

Copy Link

Recommended publications

Estimating Highway Maintenance Work Indiana LTAP Center
Estimating Highway Maintenance Work July 2011 SP-1-2011 compiled by The Ohio Department of Transportation updated by The Indiana LTAP Center Indiana LTAP Center Purdue University School of Civil Engineering Indiana LTAP Center 3000 Kent Avenue West Lafayette, Indiana 47906 Telephone: 765.494.2164 Toll Free in Indiana: 1.800.428.7639 Facsimile: 765.496.1176 This document is disseminated under the sponsorship of the Indiana LTAP Center at Purdue University in the interest of information exchange. Purdue University and the Indiana LTAP Center assume no liability for its contents or use thereof. Purdue University and the Indiana LTAP Center do not endorse products or manufacturers. Trademarks or manufacturers names may appear herein only because they are considered essential to the objective of this document. The contents of this report reflect the views of the authors, who are responsible for the facts and accuracy of the data presented herein. The contents do not necessarily reflect the official policy of Purdue University or the Indiana LTAP Center. This report does not constitute a standard, specification, or regulation. Estimating Highway Maintenance Work Estimating amounts of materials, work done, size of crews, or number of trucks needed for road maintenance requires the skill of working with NUMBERS and MEASUREMENTS . By using addition, subtraction, multiplication, division and some basic rules, you can do some figuring ahead of time and make your crews look better. People feel better about themselves when they’re doing a good job, their friends do too, and so does the motoring public. NUMBERS play an important part in the everyday affairs of everybody.
[Show full text]
Guide for the Use of the International System of Units (SI)
Guide for the Use of the International System of Units (SI) m kg s cd SI mol K A NIST Special Publication 811 2008 Edition Ambler Thompson and Barry N. Taylor NIST Special Publication 811 2008 Edition Guide for the Use of the International System of Units (SI) Ambler Thompson Technology Services and Barry N. Taylor Physics Laboratory National Institute of Standards and Technology Gaithersburg, MD 20899 (Supersedes NIST Special Publication 811, 1995 Edition, April 1995) March 2008 U.S. Department of Commerce Carlos M. Gutierrez, Secretary National Institute of Standards and Technology James M. Turner, Acting Director National Institute of Standards and Technology Special Publication 811, 2008 Edition (Supersedes NIST Special Publication 811, April 1995 Edition) Natl. Inst. Stand. Technol. Spec. Publ. 811, 2008 Ed., 85 pages (March 2008; 2nd printing November 2008) CODEN: NSPUE3 Note on 2nd printing: This 2nd printing dated November 2008 of NIST SP811 corrects a number of minor typographical errors present in the 1st printing dated March 2008. Guide for the Use of the International System of Units (SI) Preface The International System of Units, universally abbreviated SI (from the French Le Système International d’Unités), is the modern metric system of measurement. Long the dominant measurement system used in science, the SI is becoming the dominant measurement system used in international commerce. The Omnibus Trade and Competitiveness Act of August 1988 [Public Law (PL) 100-418] changed the name of the National Bureau of Standards (NBS) to the National Institute of Standards and Technology (NIST) and gave to NIST the added task of helping U.S.
[Show full text]
Metric System Conversion Factors1 J
AGR39 Metric System Conversion Factors1 J. Bryan Unruh, Barry J. Brecke, and Ramon G. Leon-Gonzalez2 Area Equivalents 1 Hectare (ha) 2 1 Acre (A) = 10,000 square meters (m ) 2 = 100 are (a) = 43,560 square feet (ft ) = 2.471 acres (A) = 4,840 square yards (yd2) = 0.405 hectares (ha) 1 Square Foot (ft) = 160 square rods (rd2) 2 = 4,047 square meters (m2) = 144 square inches (in ) = 929.03 square centimeters (cm2) 2 1 Acre-inch (ac-in) = 0.0929 square meters (m ) 3 = 102.8 cubic meters (m ) 1 Square Mile (mi) = 27,154 gallons, US (gal) 2 = 3,630 cubic feet (ft3) = 27,878,400 square feet (ft ) = 3,097,600 square yards (yd2) 2 1 Are (a) = 640 square acres (A ) = 2,589,988.11 square meters (m2) = 100 square meters (m2) 2 = 119.6 square yards (yd ) 1 Square Rod (rd) = 0.025 acre (A) = 39,204 square inches (in2) = 272.25 square feet (ft2) 1 Cubic Foot (ft) 2 3 = 30.25 square yards (yds ) = 1,728 cubic inches (in ) = 25.3 square meters (m2) = 0.037 cubic yards (yds3) 3 = 0.02832 cubic meters (cm ) 1 Square Yard (yd) = 28,320 cubic centimeters (cm3) = 9 square feet (ft2) 2 1 Cubic Yard (yd) = 0.836 square meters (m ) = 27 cubic feet (ft3) = 0.764 cubic meters (m3) 1. This document is AGR39, one of a series of the Environmental Horticulture Department, UF/IFAS Extension. Original publication date November 1993. Revised December 2014. Reviewed December 2017. Visit the EDIS website at http://edis.ifas.ufl.edu.
[Show full text]
Calculating the Surface Area of Your Landscape
Tips for Calculating Surface Area Area is defined in terms of square measures. The most commonly used area measurements are square feet and acres. Areas of : rectangle or square = length x width trapezoid = parallel sides A + B / 2 x height triangle = base x height / 2 circle = radius (1/2 diameter) squared x 3.14 oval = length x width x 0.8 The offset method is used to measure the area (square feet) of irregularly shaped areas. It reduces large areas to a series of smaller trapezoids that are equally spaced along a measured line. This method will determine the area to within 5%. The four steps in determining area by the offset method are as follows: Step 1: Determine the length line. This is the longest axis of the figure. Its endpoints should be labeled A and B. A B Step 2: Mark offset lines at right angles to the length line. Choose how many offset lines to use so that they divide line AB into equal segments and define regions amenable to calculation. For example, if the length line is 40 feet, a logical distance between offset lines would be 10 feet, which would end up with 4 measurements. If the shape of the area is uniform, fewer offset lines are needed. However, if the shape is irregular, more offset lines are needed. A B 10 ft. Step 3: Measure the length of each offset line. These are measured from one edge of the area to the other. A B 10 ft. 15 ft. 12 ft. 5 ft. Step 4: Add up the lengths of all offset lines and multiply by the distance between offset lines on the length line.
[Show full text]
The International System of Units (SI) - Conversion Factors For
NIST Special Publication 1038 The International System of Units (SI) – Conversion Factors for General Use Kenneth Butcher Linda Crown Elizabeth J. Gentry Weights and Measures Division Technology Services NIST Special Publication 1038 The International System of Units (SI) - Conversion Factors for General Use Editors: Kenneth S. Butcher Linda D. Crown Elizabeth J. Gentry Weights and Measures Division Carol Hockert, Chief Weights and Measures Division Technology Services National Institute of Standards and Technology May 2006 U.S. Department of Commerce Carlo M. Gutierrez, Secretary Technology Administration Robert Cresanti, Under Secretary of Commerce for Technology National Institute of Standards and Technology William Jeffrey, Director Certain commercial entities, equipment, or materials may be identified in this document in order to describe an experimental procedure or concept adequately. Such identification is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that the entities, materials, or equipment are necessarily the best available for the purpose. National Institute of Standards and Technology Special Publications 1038 Natl. Inst. Stand. Technol. Spec. Pub. 1038, 24 pages (May 2006) Available through NIST Weights and Measures Division STOP 2600 Gaithersburg, MD 20899-2600 Phone: (301) 975-4004 — Fax: (301) 926-0647 Internet: www.nist.gov/owm or www.nist.gov/metric TABLE OF CONTENTS FOREWORD.................................................................................................................................................................v
[Show full text]
Converter Markets Conversion Tool Fill in Only the Information You Have Or That You Want Converted Using Those Fields Outlined in BLACK in the “INPUT” Section Below
Converter Markets Conversion Tool Fill in only the information you have or that you want converted using those fields outlined in BLACK in the “INPUT” section below. The corresponding fields in the “OUTPUT” section will update accordingly. Input Rolls (Select only one width and one length.) Output Clear Form Dimensions Unit Width Millimeters Width Inches Millimeters Length Meters Length Inches Feet Yards Area Square Meters Input Sheets (Select only one width and one length.) Output Dimensions Unit Width Millimeters Width Inches Millimeters Length Millimeters Length Inches Feet Yards Area Square Meters Price (for calculations, click the button next to the unit after entering price) Clear Form Input (Select unit below) Output MSI $ Conversion Notes Price Square Meter Input price here $ FORMULA Per Roll/Sheet FROM TO FOR AREA $ $ Comparison MSI Price Inches Millimeter Inches * 25.4 Feet Meter Feet * 0.3048 Square Yard $ Yards Meter Yards * 0.9144 Price Square Meter Square MSI MSI * 0.645 Input price here Meter $ Per Roll/Sheet Square Square $ $ Square Foot * 0.093 Comparison MSI Price Foot Meter Square Square Square Yards * 0.836 Yard Meter Square Meter $ Price Square Meter Input price here $ Per Roll/Sheet FROM TO FORMULA FOR PRICE Square $ $ MSI $/MSI * 1.55 Comparison MSI Price Meter Square Square $/SqFt * 10.764 Square Foot $ Foot Meter Price Square Meter Square Square $/SqYd * 1.196 Input price here Yard Meter $ Per Roll/Sheet $ $ Comparison MSI Price Roll $ Price Square Meter Input price here $ Per Roll $ $ Comparison MSI Price Sheet $ Price Square Meter Tools Input price here $ Per Sheet $ $ Clear Form Comparison MSI Price Save Form 3M is a trademark of 3M Company.
[Show full text]
Metric Guide for Federal Construction (4-93)
METRIC GUIDE FOR FEDERAL CONSTRUCTION First Edition The Construction Subcommittee of the Metrication Operating Committee of the Interagency on Metric Policy Published by the NATIONAL INSTITUTE OF BUILDING SCIENCES 1201 L Street N.W. Washington, D.C. 20005 Call 202-289-7800 for ordering information. Copyright © 1991, 1992, 1993, National Institute of Building Sciences. First printing, December 1991 Second printing, March 1992 Third printing, August 1992 Fourth printing, April 1993 METRIC GUIDE FOR FEDERAL CONSTRUCTION First Edition The Construction Subcommittee of the Metrication Operating Committee of the Interagency Council on Metric Policy ACKNOWLEDGEMENTS The Construction Subcommittee of the Interagency Council on Metric Policy's Metrication Operating Committee has prepared this guide to aid the federal agencies in implementing the metric system of measurement in the federal construction process. I would like to express my appreciation to Arnold Prima of the Office of the Secretary of Defense, who first voiced a need for the guide and initiated its development; to William Brenner of the National Institute of Building Scienc- es, who wrote it; to Claret Heider, its editor; and to reviewers William Aird of the State Department, Valerie Antoine and Louis Sokol of the U.S. Metric Association, Bruce Barrow of the Defense Information Systems Agency, Maria Grazi Bruschi of the American Society of Civil Engineers, Ronald Clevenger of the Tennessee Valley Authority, Amitabha Datta of the General Services Admin- istration, Troy Estes of the National Aeronautics and Space Administration, Luther Flouton of the Public Health Service, James Gross of the National Institute of Standards and Technology, Leslie Hegyi, Stan Jakuba of S.I.
[Show full text]
Metrication Problems in the Construction Codes and Standards Sector
Lef©r©nce NBS Pubii - cations i vt NBS TECHNICAL NOTE 915 v ^&^ J 0ffBM Of NATIONAL BUREAU OF STANDARDS 1 The National Bureau of Standards was established by an act of Congress March 3, 1901. The Bureau's overall goal is to strengthen and advance the Nation's science and technology and facilitate their effective application for public benefit. To this end, the Bureau conducts research and provides: (1) a basis for the Nation's physical measurement system, (2) scientific and technological services for industry and government, (3) a technical basis for equity in trade, and (4) technical services to promote public safety. The Bureau consists of the Institute for Basic Standards, the Institute for Materials Research, the Institute for Applied Technology, the Institute for Computer Sciences and Technology, and the Office for Information Programs. THE INSTITUTE FOR BASIC STANDARDS provides the central basis within the United States of a complete and consistent system of physical measurement; coordinates that system with measurement systems of other nations; and furnishes essential services leading to accurate and uniform physical measurements throughout the Nation's scientific community, industry, and commerce. The Institute consists of the Office of Measurement Services, the Office of Radiation Measurement and the following Center and divisions: Applied Mathematics — Electricity — Mechanics — Heat — Optical Physics — Center for Radiation Research: Nuclear Sciences; Applied Radiation — Laboratory Astrophysics - — Cryogenics ~ — Electromagnetics " — Time and Frequency ". THE INSTITUTE FOR MATERIALS RESEARCH conducts materials research leading to improved methods of measurement, standards, and data on the properties of well-characterized materials needed by industry, commerce, educational institutions, and Government: provides advisory and research services to other Government agencies; and develops, produces, and distributes standard reference materials.
[Show full text]
Units of Measure and Conversions Factors
UNITS OF MEASURE AND CONVERSIONS FACTORS Bert T. Swanson Abbreviations Abbreviation Definition Abbreviation Definition ppt Parts per Thousand ac Acre pt Pint(s) Bu Bushel(s) qt Quart(s) C or c Cup(s) S Siemen(s) cc Cubic Centimeter(s) rd Rod(s) cm Centimeter(s) Sec. Section(s) cm2 Square Centimeter(s) Tbsp Tablespoon(s) cm3 Cubic Centimeter(s) T Ton(s) C:N Carbon Nitrogen Ratio tsp Teaspoon(s) dm Decimeter(s) Twns Township dr Dram µl Microliter(s) dS/m DeciSiemens µgm Microgram(s) EC Electroconductivity (Salinity) µmho Micromho(s) ft Foot/Feet yd Yard(s) ft2 Square Foot/Feet yd2 Square Yard(s) ft3 Cubic Foot/Feet yd3 Cubic Yard(s) gal Gallon(s) gm Gram(s) gn Grain(s) Equivalent Measures ha Hectare(s) Area Measures: in Inch(es) 1 ac = 43,560 ft2 in2 Square Inch(es) 1 ac = 0.4 ha in3 Cubic Inch(es) 640 ac = 1 mi2 kg Kilogram(s) 1 cm2 = 0.16 in2 kl Kiloliter(s) 10,000 cm2 = 1 m2 km Kilometer(s) 1 ft2 = 0.111 yd2 l Liter(s) 1 ft2 = 144 in2 lb Pound 1 ft2 = 0.09 m2 lbs Pounds 9 ft2 = 1 yd2 m Meter(s) 43,560 ft2 = 1 ac m2 Square Meter(s) 1 ha = 2.47 ac m3 Cubic Meter(s) 1 in2 = 6.5 cm2 meg Milliequivalents 1 in2 = 0.0069 ft2 mg Milligrams(s) 144 in2 = 1 ft2 mi Mile(s) 1 m2 = 1.1 yd2 mi2 Square Mile(s) 1 m2 = 11.1 ft2 ml Milliliter(s) 1mi2 = 640 ac mm Millimeter(s) 1 km2 = 0.36 mi2 mmho Millimhos 1 mi2 = 2.8 km2 mS MilliSiemen(s) 1 mi2 = 1 Sec.
[Show full text]
Checking the Net Contents of Packaged Goods
Handbook 133 – 2020 Appendix E. General Tables of Units of Measurement Appendix E. General Tables of Units of Measurement These tables have been prepared for the benefit of those requiring tables of units for occasional ready reference. In Section 4. Tables of Units of Measurement of this Appendix, the tables are carried out to a large number of decimal places and exact values are indicated by underlining. In most of the other tables, only a limited number of decimal places are given, therefore making the tables better adapted to the average user. Section 1. Tables of Metric Units of Measurement In the metric system of measurement, designations of multiples and subdivisions of any unit may be arrived at by combining with the name of the unit the prefixes deka, hecto, and kilo meaning, respectively, 10, 100, and 1000, and deci, centi, and milli, meaning, respectively, one-tenth, one-hundredth, and one-thousandth. In some of the following metric tables, some such multiples and subdivisions have not been included for the reason that these have little, if any currency in actual usage. In certain cases, particularly in scientific usage, it becomes convenient to provide for multiples larger than 1000 and for subdivisions smaller than one-thousandth. Accordingly, the following prefixes have been introduced and these are now generally recognized: yotta, (Y) meaning 1024 deci, (d), meaning 10-1 zetta, (Z), meaning 1021 centi, (c), meaning 10-2 exa, (E), meaning 1018 milli, (m), meaning 10-3 peta, (P), meaning 1015 micro, (µ), meaning 10-6 tera, (T), meaning 1012 nano, (n), meaning 10-9 giga, (G), meaning 109 pico, (p), meaning 10-12 mega, (M), meaning 106 femto, (f), meaning 10-15 kilo, (k), meaning 103 atto, (a), meaning 10-18 hecto, (h), meaning 102 zepto, (z), meaning 10-21 deka, (da), meaning 101 yocto, (y), meaning 10-24 Thus a kilometer is 1000 meters and a millimeter is 0.001 meter.
[Show full text]
Measuring and Figuring for Gardeners Before Purchasing Plants, Compost and Mulch, It Is Good to Have Some Idea About the Quantities That Will Be Needed
Measuring and Figuring for Gardeners Before purchasing plants, compost and mulch, it is good to have some idea about the quantities that will be needed. A visual estimate will usually work, but when time or money is limited and a large project is in the works, it is best to come to Bowood prepared. how to measure your garden Lawns, vegetable plots and garden beds are measured in square feet. You will need to know your square footage when seeding lawns, figuring vegetable production, buying annual flowers or when spacing out your perennials, shrubs and trees. o It is easy to measure areas that are shaped like a square or rectangle: Area = Length x Width. o Measure one side of a square plot and multiply that number by itself to get the square footage. o Measure the length and the width of a rectangular plot and multiply those two numbers to get the square footage. 5’ 10’ 20’ These two plots have the same square footage because 10’ 10’ x 10’ = 100 square feet & 5’ x 20’ = 100 square feet o Think of triangular plots as half-squares or half-rectangles. Measure each side and divide by two and you will have the square footage. o Another way to visualize this is to imagine a 10’ x 10’ square extended from a triangular plot and divide that in half. Your imaginary plot is 50 square feet. o This works with most triangular shapes. Sometimes you’ll just have to estimate. 10’ (Err on the side of EXTRA when doing your figuring so you won’t have to make a return trip to Bowood in the middle of your project!) o Irregular shapes and circles can be roughly figured by combining squares, 10’ rectangles, and triangles.
[Show full text]
CHAPTER 6: MEASUREMENTS Contents
College Prep Essential Math Chapter 6: Measurements CHAPTER 6: MEASUREMENTS Chapter Objectives By the end of this chapter, students should be able to: Identify terms used in measurement in both metric and U.S. customary systems Distinguish between 1, 2, and 3 dimensional measures. Convert U.S. customary unit measures. Convert between U.S. and metric systems. Solve applications of unit measurements. Contents CHAPTER 6: MEASUREMENTS .................................................................................... 1 SECTION 6.1 MEASUREMENT .................................................................................. 2 A. U.S. CUSTOMARY SYSTEM ......................................................................... 2 I. Weight ............................................................................................................. 2 II. Length.......................................................................................................... 3 III. Area ............................................................................................................. 5 IV. Volume ........................................................................................................ 6 B. METRIC SYSTEM .......................................................................................... 9 I. Weight ............................................................................................................. 9 II. Length.........................................................................................................
[Show full text]