DOCSLIB.ORG

T-Slot Nuts • Material: Low Carbon Steel, 303 Stainless • Heat Treat: Case Hardened • Finish: Black Oxide • Available in Metric Sizes

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
T-Slot Nuts • Material: Low Carbon Steel, 303 Stainless • Heat Treat: Case Hardened • Finish: Black Oxide • Available in Metric Sizes WORKHOLDING COMPONENTS 6 www.jergensinc.com Adjustable Clamp Heels ................... 6.45 Nuts, Spherical Flange ..................... 6.31 Adjustable Clamp Rests ................... 6.44 Nuts, Spinner-Grip ............................ 6.31 Adjustable Step Blocks ..................... 6.55 Nuts, Stainless Steel ........................ 6.33 Assemblies, Spherical Flange .......... 6.30 Nuts, T-Slot ....................................... 6.35 Bolts, Dovetail ................................... 6.28 Plastic Pad Covers ........................... 6.16 Bolts, Swing ...................................... 6.11 Revolving Clamp Assemblies, Long Bolts, T .............................................. 6.28 Bushing Type ................................... 6.8 Bolts, T-Slot ....................................... 6.27 Revolving Clamp Assemblies, Bolts, T-Strap .................................... 6.23 Short Bushing Type ......................... 6.8 Clamp Assemblies, Double Cam ........ 6.4 Revolving Clamp Base ....................... 6.8 Clamp Assemblies, Flange Nut .......... 6.3 Rod Ends .......................................... 6.12 Clamp Assembly, Heel Pad ................ 6.2 Screw, Half Turn ................................ 6.13 Clamp Assemblies, Hook ................... 6.9 Screws, Hand Knob ............................ 6.6 Clamp Assemblies, Knob ................... 6.5 Screws, Quarter Turn ........................ 6.13 Clamp Assemblies, Miniature Flat ...... 6.2 Screws, Socket Shoulder ..........6.10-6.11 Clamp Assemblies, Miniature Radius ... 6.2 Screws, Thumb ................................. 6.14 Clamp Assemblies, Set-Up Kits, Die ................................ 6.57 Radius End Flange Nut ................... 6.3 Set-Up Kits ...............................6.56-6.57 Clamp Assemblies, Radius Swing ...... 6.3 Single Cams ....................................... 6.7 Clamp Assemblies ...........6.2-6.5, 6.8-6.9 Step Blocks ....................................... 6.55 Clamp Rests ....................................... 6.6 Strap Pads .......................................... 6.7 Clamping Kits ................................... 6.57 Straps, Heel ...................................... 6.54 Clevis Pins ........................................ 6.22 Straps, Miniature Flat ....................... 6.44 Collars, Steel Shaft ........................... 6.23 Straps, Miniature Radius .................. 6.43 Double Cams ...................................... 6.7 Straps, Padded ................................. 6.46 Finger Handles ................................... 6.6 Straps, Plain ..................................... 6.45 Forged Adjustable Clamp ................. 6.53 Straps, Radius .................................. 6.48 Forged Straps, U Clamp ................... 6.52 Straps, Slotted Radius ...................... 6.48 Forged Straps, Finger Clamp ........... 6.52 Straps, Taper Nose Stainless Steel ...... 6.44 Forged Straps, Gooseneck Clamp ... 6.51 Straps, Taper Nose ........................... 6.50 Forged Straps, Heel Clamp .............. 6.51 Straps, Tapped Radius ..................... 6.43 Guide Blocks ...................................... 6.6 Straps, Tapped .................................. 6.49 Replaceable Grippers ...............6.41-6.42 Studs, Alloy Steel......................6.24-6.25 Tapered Hardened Steel ........6.41-6.42 Studs, Fixture ................................... 6.26 Tapered Carbide Steel ................... 6.42 Studs, Set-Up ................................... 6.26 I.D. Expansion Clamp ....................... 6.62 Studs ........................................6.24-6.26 Leveling Mounts ................................ 6.20 Tee Strap Bolts ................................. 6.23 Leveling Pads ...........................6.18-6.19 Toe Clamp, Kits.........................6.58-6.59 Machine Vise ............................6.70-6.71 Toe Clamps, Large ........................... 6.59 Micro Clamps, Adjustable ................. 6.61 Toe Clamps, Small ............................ 6.58 Micro Clamps, Edge ......................... 6.67 Toggle Pads ...................................... 6.17 Micro Clamps, Expanding ................. 6.64 Toggle Screws, Adjustable Torque .... 6.15 Micro Clamp, Knife Edge .................. 6.63 Toggle Screws, Hand Knob .............. 6.15 Micro Clamp, Low Profile .................. 6.60 Toggle Screws, Socket Toggle .......... 6.16 Micro Clamps, Machinable Expanding .. 6.65 Toggle Screws, Thumb ..................... 6.16 Micro Clamps .................................... 6.63 U-Straps, Long Slot .......................... 6.47 Micro Clamps, T-Slot ......................... 6.66 Washers, “C” ..................................... 6.37 Micro Clamps, Toe ............................ 6.66 Washers, Equalizing “C” ................... 6.37 Modular Mini Vise ............................. 6.68 Washers, Equalizing Swing “C” Nuts, Acorn ....................................... 6.33 Assembly ...................................... 6.38 Nuts, Check ...................................... 6.32 Washers, Equalizing Swing “C” ........ 6.37 Nuts, Coupling .................................. 6.32 Washers, Flat .................................... 6.36 Nuts, Equalizing Hex Head ............... 6.30 Washers, Heavy Duty Flat ................ 6.36 Nuts, Flange ..................................... 6.29 Washers, Heavy Duty Square .......... 6.38 Nuts, Heavy Duty Hex ...................... 6.30 Washers, Self Aligning ...................... 6.39 Nuts, Knurled Equalizing .................. 6.33 Washer, USAE .................................. 6.40 Nuts, Knurled Lock ........................... 6.32 Yokes ........................................6.21-6.22 Nuts, Kwik-Thread ............................ 6.34 6.1 6 WORKHOLDING COMPONENTS www.jergensinc.com Clamp Assemblies Miniature Flat Fast-acting clamp for light-duty hold- ing. Includes strap, knurled thumb screw, spherical washer, stud, plain flat washer, three hex jam nuts and spring. Features free swinging adjustments for positioning the assembly without interference. Part Thread Wt. Number A B C D E F Size (lbs) 12901 5/8 1/4 1/8 1 1/2 1 9/16 11/16 10-24 .19 12902 5/8 1/4 1/8 2 1 9/16 15/16 1/4-20 .22 12903 9/16 1/4 1/8 2 1/2 1 9/16 1 3/16 1/4-20 .25 Miniature Radius A light-duty clamp assembly for clamping close to the edge. Complete with radius strap, double jam nuts with spherical washers, finger tip, quick-action knurled thumb screw heel rest, stud, spring and washer. The latter allows free swinging and lateral adjustments for easier set-ups. Part Thread Wt. Number A B C D E F G Size (lbs) 13101 1/2 1/2 1/4 1 1/2 7/16 1 9/16 9/16 10-24 .20 13102 1/2 1/2 1/4 1 3/4 9/16 1 9/16 11/16 10-24 .22 13103 1/2 1/2 1/4 2 11/16 1 9/16 13/16 10-24 .24 Heel Pad In one movement this clamp assembly can be moved into place and tightened; recommended where hand pressure clamping is suitable for the application. Part Thread Wt. Number A B C D E F G H Heel Pad J Size (lbs) 13301 5/8 5/8 1/2 2 5/8 1 15/16 25/32 3/4 13701 1/2 1/4-20 .38 13312 9/16 7/8 11/16 2 1/2 3/4 2 9/16 15/16 1 13703 5/8 5/16-18 .69 13306 13/16 1 1/4 7/8 3 1/2 1 2 7/8 1 7/16 1 13703 1/2 3/8-16 1.38 13308 13/16 1 1/4 7/8 4 1/2 1 5/8 2 7/8 1 13/16 1 13703 1/2 3/8-16 1.68 13313 1 1/4 1 1/2 1 4 1/2 1 1/4 3 7/8 1 15/16 1 1/2 13705 1 1/8 1/2-13 2.20 6.2 Jergens, Inc. • Jergens Way • 15700 S. Waterloo Road • Cleveland, Ohio 44110-3898 USA WORKHOLDING COMPONENTS 6 www.jergensinc.com www.jergensinc.com Heavy-duty clamping with spherical flange nut and spherical washer for greater flex- Clamp Assemblies ibility. Extra long, true milled slot allows more clearance for placing and removing work. Flange Nut Brass and plastic pads are available, see page 6.7. Part Thread Wt. Number A B C D E F G* Size (lbs) 12701† 3/4 5/8 1/2 2 5/8 1 5/8 7/8 1/4-20 .27 12703 1 1/2 1 1/4 7/8 3 1/2 1 1/8 2 15/16 1 7/16 3/8-16 1.12 12705 1 1/2 1 1/4 7/8 4 1/2 1 5/8 2 15/16 1 15/16 3/8-16 1.38 12707 1 1/8 1 1/2 1 1/8 4 1/2 1 1/4 3 2 1/8 1/2-13 2.12 12710 1 1/8 1 1/2 1 1/8 6 2 3 2 7/8 1/2-13 2.62 12711 2 5/8 1 3/4 1 3/8 5 1 1/2 5 1/16 2 1/8 5/8-11 3.50 12713 2 5/8 1 3/4 1 3/8 7 2 1/2 5 1/16 3 1/8 5/8-11 4.12 12714 1 3/4 1 3/4 1 1/2 5 1 1/2 4 3/8 2 1/8 3/4-10 4.12 12716 1 3/4 1 3/4 1 1/2 7 2 1/2 4 3/8 3 1/8 3/4-10 4.87 *G dimension represents an optimum dimension. Use where great clamping pressures are † Does not include finger handle. See page 6.6. needed and vibration is a problem. Radius End Flange Nut Heavy-duty clamping of plain surfaces with spherical flange nut and spherical washer for angular flexibility. Long, true milled slot allows greater clearance for placing and removing work. Spring-loaded stud for quick release. Part Thread Wt. Number A B C D E F G* Size (lbs) 1410 3† 7/8 5/8 3/8 2 5/8 1 5/8 7/8 1/4-20 .25 1410 4† 7/8 5/8 3/8 2 1/2 1 1 5/8 7/8 1/4-20 .28 14117 † 1 1/8 7/8 1/2 2 1/2 3/4 2 1/4 15/16 5/16-18 .75 14118† 1 1/8 7/8 1/2 3 1/2 1 1/4 2 1/4 15/16 5/16-18 .85 1410 5 1 3/4 1 1/4 5/8 3 1/2 1 1/8 2 15/16 1 7/16 3/8-16 1.10 14119 1 3/4 1 1/4 5/8 4 1/2 1 5/8 2 15/16 1 7/16 3/8-16 1.20 1410 8 1 1/2 1 1/2 3/4 4 1/2 1 1/4 3 1 7/8 1/2-13 2.00 14110 1 1/2 1 1/2 3/4 6 1 1/2 3 1 7/8 1/2-13 2.44 14111 3 1/8 1 3/4 7/8 5 1 1/2 5 1/16 2 5/8-11 3.25 14113 3 1/8 1 3/4 7/8 7 2 1/2 5 1/16 2 5/8-11 3.88 14114 2 1/4 1 3/4 1 5 1 1/2 4 3/8 2 1/8 3/4-10 3.88 14116 2 1/4 1 3/4 1 7 2 1/2 4 3/8 2 1/8 3/4-10 4.85 *G dimension represents an optimum dimension.
Load more

Recommended publications
  • Threaded Insert Systems
    Threaded Insert Systems Edition 04 2012 Expertise in Fastening Solutions With over 100 years experience in the design and manufacture of assembly technology, Emhart has the expertise to provide fastening solutions to a wide range of industries from Automotive, Construction, and Electronics through to sheet metal assembly and general industry. We offer consulting, technical advice, a wide range of volume parts and high quality setting equipment to meet the varying needs of our customers. 2 Emhart in Europe Emhart has experienced technical experts and application engineers available throughout Europe ready to support customers with application and assembly processes and fastener specifications. We service our European customers directly through our manufacturing and warehousing facilities around Europe or through our network of highly experienced distributors. Emhart Facilities and Distribution Network Distribution Network 3 4 Threaded Insert Systems www.emhart.eu Introduction 6 Materials 8 Finishes 9 Geometry 10 Design Solutions 11 Joint Design 12 Torque Strength 13 Product Index 14 POPNut® Aluminium 16 POPNut® Steel 19 POPNut® Stainless Steel 27 POPNut® Setting Tools 32 Power Tools 34 POP® Counter System 37 Hand Tools 38 WellNut® 39 Jack Nut® 42 Glossary & Technical Advice 45 5 POPNut® POPNut® Threaded Inserts can be installed into sheet-metal, tubing, extrusions, plastics and other materials to provide an internal thread for subsequent component assembly. POPNut® is the perfect solution for providing high quality, load bearing threads even in single thin sheets down to 0.5mm. POPNut® can be used in a variety of materials where alternative methods cannot maintain torque and pull out loads. They enable components which are assembled later in the production cycle to be adjusted and are ideally suited to applications where access is only available from one side of the workpiece.
    [Show full text]
  • LIO-360-B1G6 Engine Maintenance Manual Lycoming Part Number: MM-LIO-360-B1G6
    Engine Maintenance Manual (Principal Manual) LIO-360-B1G6 Engine September 2017 Part No. MM-LIO-360-B1G6 © 2017 Avco Corporation. All Rights Reserved. LIO-360-B1G6 Engine Maintenance Manual Lycoming Part Number: MM-LIO-360-B1G6 Contact Us: Mailing Address: Lycoming Engines 652 Oliver Street Williamsport, PA 17701 USA Phone: U.S. and Canada Toll Free: +1 (800) 258-3279 Factory Direct: +1 (570) 323-6181 Technical Support Hotline • +1 (877) 839-7878 (Toll Free) • +1 (570) 327-7222 Lycoming’s regular business hours are Monday through Friday from 8:00AM through 5:00PM Eastern Time (-5 GMT). Visit us Online: www.Lycoming.com LIO-360-B1G6 Engine Maintenance Manual RECORD OF REVISIONS Revision Revised Revision Date By Revision Description Original Original Release of Maintenance Manual - Part No. MM-LIO-360-B1G6 © 2017 Avco Corporation. All Rights Reserved Record of Revisions September 2017 Page i LIO-360-B1G6 Engine Maintenance Manual This page intentionally left blank. Record of Revisions © 2017 Avco Corporation. All Rights Reserved Page ii September 2017 LIO-360-B1G6 Engine Maintenance Manual SERVICE DOCUMENT LIST NOTICE: The following is a list of service documents referenced in or incorporated into the information in this manual. Always refer to the latest revision of any service document (including any supplements) for changes or additional information. Number Incorporation Subject Date S.B. 201 09/17 Inspection of Crankshaft Flange S.B. 240 09/17 Mandatory Parts Replacement at Overhaul and During Repair or Maintenance S.B. 342 09/17 Fuel Line (Stainless Steel Tube Assy.) and Support Clamp Inspection and Installation S.B.
    [Show full text]
  • PDF Product List
    STRUCTURAL BOLTS MACHINE BOLTS NUTS A325 Screw Only, A193 B7 Heavy Hex Head Bolt Acorn (Cap) Nut Domestic & Import A307A Breakaway Bolt Allen Nut A325 Bolt with Nut A307B Heavy Head Bolt Cap (Acorn) Nut A325 Type 3 Bolt, Domestic F1554 Hex Machine Bolt Castle Nut A325 Interference Body Bolt (Grades 36, 55, & 105) Coupling Nut Canadian A325 Bolt w/DH Nut, Square Head Machine Bolt Coupling Nut, Reducer Hot Dip Galvanized Coupling Nut, Heavy Duty A490 Screw Only, BOLTS & SCREWS Hex Nut Domestic & Import Carriage Bolt Hex Nut, Left Hand TC A325 Assembly, Countersunk Bolt Hex Nut, Heavy Grade 4 Domestic& Import Counterbore Screw, 12 Point Hex Nut, Heavy, Grade 7 TC A490 Assembly, Elevator Bolt Hvy Double Recess Guardrail Nut Domestic & Import Flange Bolt Jack Nut Flat Head Bolt, Slotted Jam Nut STRUCTURAL NUTS Guardrail Bolt Jam Nut, Left Hand A194 2H Nut, Domestic Hanger Bolt Flange Nut A194 2H Nut, Import Lag Screw High Nut A563 Grade DH Heavy Nut, Lag Screw, 1-Way Truss Head Knurled Nut Domestic Lag Screw, Indented HWH Machine Screw Nut, Hex A563 DH Type 3 Nut Full Thread Machine Screw Nut, Small Pattern ANCO Heavy Hex Locknut Lag Screw, Square Head Machine Screw Nut, Square ANCO Finished Locknut Penta Head Bolt Palnut ANCO 2H Heavy Locknut Place Bolt Panel Nut ANCO A325 Locknut Plow Bolt, Grade 2 Slotted Nut Plow Bolt, Grade 5 Slotted Nut, Heavy STRUCTURAL WASHERS Plow Bolt, Grade 8 Square Nut F436 Hardened Washer Shaker Screen Bolt, Grade 5 Square Nut, Heavy Domestic & Import Shackle Bolt Tee Nut F436 Type 3 Washer Security Bolt Wing
    [Show full text]
  • Requirements for Threaded Fastening Systems in Spaceflight Hardware
    METRIC/SI (ENGLISH) NASA TECHNICAL STANDARD NASA-STD-5020A w/CHANGE 1: Office of the NASA Chief Engineer ADMINISTRATIVE/ EDITORIAL CHANGE 2019-02-11 Approved: 2018-09-04 Superseding NASA-STD-5020 (Baseline) REQUIREMENTS FOR THREADED FASTENING SYSTEMS IN SPACEFLIGHT HARDWARE APPROVED FOR PUBLIC RELEASE – DISTRIBUTION IS UNLIMITED NASA-STD-5020A w/CHANGE 1 DOCUMENT HISTORY LOG Status Document Change Approval Date Description Revision Number Baseline 2012-03-12 Initial Release Revision A 2018-09-04 Significant changes were made to this NASA Technical Standard. It is recommended that it be reviewed in its entirety before implementation. Key changes were: The format of the baseline version has been modified to provide better flow of the requirements language. This includes the order of the requirements from the baseline version. Some requirements have been merged due to redundancy or deleted. 1 2019-02-11 Editorial Changes—Corrected decision box No. 2 in Appendix A.5, Figure 8, Determining Whether a Joint Separates before Rupture When Loaded Solely in Tension, to state Pp-max ≤ 0.75*Ptu-allow (vs. “0.85”), which aligns with the previous revision and the justification in the text. Corrected the symbol for phi to ϕ (vs. (φ) in equation 47. Unbolded two equations in Appendix A.12.3. APPROVED FOR PUBLIC RELEASE – DISTRIBUTION IS UNLIMITED 2 of 114 NASA-STD-5020A w/CHANGE 1 FOREWORD This NASA Technical Standard is published by the National Aeronautics and Space Administration (NASA) to provide uniform engineering and technical requirements for processes, procedures, practices, and methods that have been endorsed as standard for NASA programs and projects, including requirements for selection, application, and design criteria of an item.
    [Show full text]
  • Bus and Coach Rear Drive Axles Revised 06-16
    Maintenance Manual 23A Bus and Coach Rear Drive Axles Revised 06-16 59000 Series 61000 Series 71000 and 79000 Series RC-26-700 Series Service Notes About This Manual How to Obtain Additional Maintenance, This manual provides maintenance and service information for the Service and Product Information Meritor 59000, 61000, 71000, 79000, RC-23-160 and Visit Literature on Demand at meritor.com to access and order RC-26-700 Series bus and coach rear drive and center axles and T additional information. Series parking brake. Contact the Meritor OnTrac™ Customer Call Center at Before You Begin 866-668-7221 (United States and Canada); 001-800-889-1834 (Mexico); or email [email protected]. 1. Read and understand all instructions and procedures before you begin to service components. If Tools and Supplies are Specified in 2. Read and observe all Warning and Caution hazard alert This Manual messages in this publication. They provide information that can Contact Meritor’s Commercial Vehicle Aftermarket at help prevent serious personal injury, damage to components, 888-725-9355. or both. 3. Follow your company’s maintenance and service, installation, Kiene Diesel Accessories, Inc., 325 S. Fairbanks Street, Addison, IL 60101. Call the company’s customer service center at and diagnostics guidelines. 800-264-5950, or visit their website at kienediesel.com. 4. Use special tools when required to help avoid serious personal injury and damage to components. SPX/OTC Service Solutions, 655 Eisenhower Drive, Owatonna, MN 55060. Call the company’s customer service center at Hazard Alert Messages and Torque 800-533-6128, or visit their website at otctools.com.
    [Show full text]
  • AVK Inserts & Tools
    1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français AVK® Industrial Products Table of Contents Table des matières des produits industriels AVKMD Page No. The A-H Series™ features a hex body design that when ™ used in a hex hole produces the ultimate in spin-out A-H INSERT torque resistance. This feature is important when SPC SERIES THREADED HEX INSERTS and/or a prevailing torque thread lock is required. The C128-C129 A-H Series can be installed after finish. The A-K Series™, similar to the A-L, features a ™ minimized head profile that allows for nearly flush A-K INSERT installations without the need for special hole C130-C131 SERIES KNURLED THREADED INSERTS preparations such as countersinking or dimpling. The A-K Series can be installed after finish. C The A-L Series™ features a large diameter, low profile ™ head, making it ideal for use in punched or even hand A-L INSERT drilled out-of-round holes. The A-L Series offers the C132-C133 highest all around strength characteristics and is by SERIES KNURLED THREADED INSERTS far AVK’s most versatile product. The A-L Series can be installed after finish. The A-O Series™ provides very high pull-out loads ™ particularly effective in thin metal. May be used where A-O INSERT the AT Series insert will not generate enough pull-out C134 SERIES THREADED INSERTS in very thin materials and a hole size change cannot be made to accommodate the A-K or A-L Series inserts.
    [Show full text]
  • Draft Standard
    PHILIPPINE AGRICULTURAL ENGINEERING STANDARD PAES 311: 2001 Engineering Materials – Bolts and Nuts for Agricultural Machines – Specifications and Applications Foreword The formulation of this National Standard was initiated by the Agricultural Machinery Testing and Evaluation Center (AMTEC) under the project entitled "Enhancing the Implementation of AFMA Through Improved Agricultural Engineering Standards" which was funded by the Bureau of Agricultural Research (BAR) of the Department of Agriculture (DA). This standard has been technically prepared in accordance with PNS 01-4:1998 (ISO/IEC Directives Part 3:1997) – Rules for the Structure and Drafting of International Standards. It provides specifications and proper application of bolts and nuts for agricultural machines. The word “shall” is used to indicate requirements strictly to be followed in order to conform to the standard and from which no deviation is permitted. The word “should” is used to indicate that among several possibilities one is recommended as particularly suitable, without mentioning or excluding others, or that certain course of action is preferred but not necessarily required. In the preparation of this standard, the following references were considered: Hummel, B. L. (Ed.) 1967. Machine design, Fastening and joining, Vol. 39 No. 34. Penton Publishing Co., Cleveland, Ohio. ISO 262:1998, ISO general purpose metric screw threads – Selected sizes for screws, bolts, and nuts ISO 273:1979, Fasteners – Clearance holes for bolts and screws ISO 888:1976, Bolts, screws, and studs – Nominal lengths and thread lengths for general purpose bolts JIS B 1052:1998, Mechanical properties of steel nuts JIS B 1057:1994, Mechanical properties of non-ferrous metal fasteners C-69 PHILIPPINE AGRICULTURAL ENGINEERING STANDARD PAES 311:2001 Engineering Materials – Bolts and Nuts for Agricultural Machines – Specifications and Applications 1 Scope This standard establishes specifications and provides technical information for the proper application of bolts and nuts for agricultural machinery.
    [Show full text]
  • ABS Fastener Catalog
    ABS FASTENERS OFFERS A COMPLETE LINE OF COMMERCIAL STANDARDS AND SPECIALS. We are your premier source for commercial grade fasteners, nuts, bolts, screws, and hard- ware. For more than 60 years, ABS has set the standard for quality, value-added services, and superior customer service. From our seven ABS warehouses strategically located across the USA and Mexico stocking several million in inventory, we are uniquely poised to serve your fastener and hardware needs for manufacturing and assembly. 4 ...........Anchors 20 .........Custom Fasteners & Hardware 5 ...........Bits 21 .........Value Added Services 6-7 ........Bolts 22 .........Quick Fastener Reference 8-9 ........Nuts 23 .........Heads, Threads, and Drive Styles 10 .........Washers 24 .........Thread Pitch Guide 11 .........Socket Products 25 .........Material Reference 12 .........Machine Screws 26 .........Plating Reference 13 .........Wood Screws 27 .........Painting Services 14 .........Construction Screws 28 .........Staple Reference 15 .........Self Drilling Screws 29 .........Nail Reference 16-17 ...Sheet Metal Screws 30 .........Hardware Off ering 18 .........Nails & Rivets 29 .........ABS Locations & Contact Info 19 .........Pins & Miscellaneous Items © 2017 American Bolt & Screw. All Rights Reserved. Reproducing or copying any part of this catalog without permission is unlawful under the United States Copyright Act. Violaters are subject to full prosecution under federal law. We hold industry together... You are not anchored to other suppliers! We have the anchors you need for light or heavy jobs. Conical Plastic Anchors E-Z Anchors Toggle Bolts Light-duty wall anchor used with a sheet metal or wood Pre-drills own hole in gympsum wallboard.Replaces A machine screw and toggle wing anchoring system screw in drywall,concrete or hollow brick.
    [Show full text]
  • EML2322L Fastener Reference Guide
    EML2322L Fastener Reference Guide Introduction Common Fastener Head, Nut, and Washer Types Fasteners are connective hardware that can easily Fastener Name Tighten With be installed and removed with common hand tools. Bolts, screws, nuts, and rivets are typical examples flat head slotted head of fasteners. The difference between a bolt, screw, (slotted) screwdriver and a stud is determined by its use. pan head Phillips head (Phillips) screwdriver wrench, socket hex head wrench button Allen/hex head cap wrench screw Allen/hex set screw Bolts are headed fasteners with external threads wrench that meet an exacting, uniform thread specification such that they can accept a standardized nut. In the Allen/hex socket head most general sense, screws are headed, externally- wrench threaded fasteners that can cut their own internal threads when installed. In mechanical and aero- shoulder Allen/hex space design applications (which are what we care screw wrench about as design engineers), screws are identical to wrench, socket bolts, but do not require nuts, as they instead screw stud wrench into threaded holes previously created in work- pieces. Studs are externally threaded headless fasteners with which one end usually mates with a rivet rivet gun threated component and the other end typically wrench, socket mates with a standardized nut. hex nut wrench Purpose wrench, socket Nyloc nut wrench The ONLY purpose of fasteners is to clamp parts together. Standard fasteners are NOT intended to serrated wrench, socket be used to for positioning or pivoting; that is the flange nut wrench function of dowel pins, locating shoulders, and flat washer - piloting diameters.
    [Show full text]
  • Avk Em-3 Catalog 20011151
    ♦ ➧ PRODUCT INDEX NEXT PAGE ® Engineering Manual MARKET LEADERS IN BLIND THREADED INSERTS AND STUDS AVK’s Quality Management System is registered to ISO/TS16949:2002 and ISO9001:2000 AVK’s Environmental Management System is registered to ISO14001:1996 ➧ ♦ ➧ PREVIOUS PAGE PRODUCT INDEX NEXT PAGE WELCOME TO THE WORLD OF AVK AVK INDUSTRIAL PRODUCTS, located in Valencia, CA, is a member of SPS Fastener Division Group, a Precision Castparts Company. AVK manufactures blind installed threaded fasteners for transportation and general industrial markets worldwide. We feature product lines of both unified (INCH) and metric fasteners along with numerous special designs that meet customer application requirements. At AVK, we are dedicated to… “IMPROVING THE WAY WE ASSEMBLE THE WORLD™” BLIND INSTALLED THREADED INSERTS AND STUDS A blind installed threaded fastener is defined as a fastener with internal or external threads that can be installed into a panel, tube or other structure from the front side without need to see or access the backside, or “blind” side to complete the installation. Once installed the fastener remains captive to which a mating component can be attached using standard hardware. This engineering manual contains technical information on all AVK standardized product lines including sales drawings and information on installation tooling. WARRANTY LIMITED WARRANTY AND EXCLUSIVE REMEDY AVK Industrial Products division of Avibank Mfg., Inc. – which is a subsidiary of Precision Castparts (“Seller”). Seller warrants that products sold hereunder conform to industry standards specified herein and will be free from defects in materials and workmanship. THIS WARRANTY IS EXPRESSLY GIVEN IN LIEU OF ANY AND ALL OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND IN LIEU OF ANY OTHER OBLIGATION ON THE PART OR THE SELLER.
    [Show full text]
  • Workholding Components
    WORKHOLDING COMPONENTS Workholding Components Adjustable Clamp Heels............................................................268 Nuts, Spinner-Grip™...................................................................255 Adjustable Clamp Rests ............................................................267 Nuts, Stainless Steel...................................................................257 Adjustable Step Blocks .............................................................278 Nuts, T-Slot ..................................................................................258 Assemblies, Spherical Flange ..................................................254 Plastic Pad Covers ......................................................................240 Bolts, Dovetail .............................................................................252 Revolving Clamp Assemblies, Long Bushing Type .............232 Bolts, Swing .................................................................................235 Revolving Clamp Assemblies, Short Bushing Type.............232 Bolts, T ..........................................................................................252 Revolving Clamp Base ...............................................................232 Bolts, T-Slot ..................................................................................251 Rod Ends ......................................................................................236 Bolts, T-Strap ...............................................................................247
    [Show full text]
  • UNITED's Nuts! Acorn, Lock - Spherical Flange Coupling, Lock and Flange Nuts GET MORE for LESS at UNITED! ACORN NUTS See Section G for Stainless
    Nuts: Acorn-Coupling- UNITED's Nuts! Acorn, Lock - Spherical Flange Coupling, Lock and Flange Nuts GET MORE FOR LESS AT UNITED! ACORN NUTS See Section G for Stainless. Closed end ACORN NUT A B C protects stud UDB-925000 1/4-20 1/2 1/2 threads from UDB-925005 5/16-18 5/8 9/16 damage. Heat UDB-925010 3/8 – 16 3/4 11/16 treated black UDB-925015 1/2-13 15/16 7/8 B oxide finish. UDB-925020 5/8-11 1-3/16 1-1/16 UDB-925025 3/4 – 10 1-3/8 1-1/4 C12L15 STEEL — HEAT TREATED WITH BLACK OXIDE FINISH. UDB-925030 7/8 – 9 1-7/16 1-7/16 KNURLED LOCK NUTS See Section G for Stainless. Quick thread 1018 STEEL — HEAT TREATED — BLACK OXIDE locking on jigs STEEL STAINLESS A THD B O. D. C STEP D E F DIA PART NO. PART NO. I. D. SIZE DIA DIA WIDTH LIP +.005 and fixtures. 1/4 -.000 detents permit UDB-925110 UDB-925110S 1/4 – 20 1-1/8 1" 7/16 1/16 .250 additional UDB-925115 UDB-925115S 3/8 – 16 1-1/8 1" 7/16 1/16 .250 tightening with UDB-925120 UDB-925120S 1/2 – 13 1-1/8 1" 7/16 1/16 .250 1/4" pin. UDB-925125 UDB-925125S 5/8 – 11 1-3/8 1" 7/16 1/16 .250 COUPLING NUTS Makes unlimited COUPLING NUT A B C stud length UDB-925050 3/8 – 16 1 11/16 combinations UDB-925055 1/2-13 1-1/4 7/8 available.
    [Show full text]