AVK Inserts & Tools

C MD C125 Français C137 C134 C138 C139 22 MAR 2018 MAR 22 Page No. C130-C131 C132-C133 C135-C136 C140-C141 C142-C153 C154-C156 C128-C129 m co . Contact Us Contact

hole hole

spin-out

. tant when SPC w ww “true metric” “true metric”

impor

is 0

Full Spaenaur Catalog Spaenaur Full Insert product line offers Insert product line offers Industrial Products Table of Contents of Table Products Industrial ™ ™ ® feature

Table des matières des produits industriels AVK matières des produits Table des insert is ideal for use in “SOFT provides very high pull-out loads

, similar to the A-L, features a AVK features a hex body design that when will work in “any” thickness over features a large diameter, low profile rivet nut features a thicker head ® This

™ ™ ® ™ Series ™ ™ Series 1-888-252-638

: F

Metric Spaenaur Home Spaenaur Metric 2 AVK Technical and Test Data. resistance.

A-H Series A-W Series A-K Series A-T Series E-L E-H R-N Series A-L Series A-O Series All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous in a rivet nut. The R-N Series can be installed after finish. The The The The used in a hex hole produces the ultimate in The The The sizes. Closed end product and a variety of head configurations are also available. Please contact Sales Desk for details. insert designs to accommodate The insert designs to accommodate head sizes. Closed end product and a variety of configurations are also available. Please contact Sales Desk for details. The MATERIALS” structural such as plastics,foam, can aluminum,be fiberglass, used insertin etc.thinner wood, protrusionThe materials A-W Series on wherethe insert backside the shallowest is desired. .030", even in to buried pull a holes.“cone” it into An shaped installationthe parent nut into material. tool the is sleeve used expanding minimized head installations profile that preparationswithout allows the for needThe nearlysuch A-K for as flush specialSeries countersinking can hole be installed or dimpling. after finish. torque particularly effectivethe AT Series in thin in insert verymetal. thinwill May materialsnot be be madegenerate used toand where accommodate enough a hole size pull-out change the A-K cannot or A-L Series inserts. profile ideal forManufactured use in leg-leveling heading on high equipment, applications.speed, state the of R-N the Series art cold guarantees quality head, making drilled it ideal out-of-round for use in punched holes. The or evenA-L Series hand offers the and/or a prevailing A-H Series torque can thread be installed lock is required.after finish. The highest all around strength characteristics and is by far AVK’s most versatile product. The A-L Series can be installed after finish. 1-800-265-877

Power and Hand Tools for AVK Series Inserts. [email protected] THREADED INSERTS THREADED THREADED HEX INSERTS INSERT INSERT INSERT INSERT INSERT INSERT INSERT INSERT THREADED HEX THREADED THREADED INSERTS THREADED KNURLED THREADED INSERTS KNURLED THREADED INSERTS THREADED KNURLED KNURLED THREADED INSERTS THREADED KNURLED KNURLED THREADED INSERTS THREADED KNURLED KNURLED THREADED INSERTS THREADED KNURLED ™ ® ™ ™ ™ ™ ™ ™ RIVET NUT ® SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES E-L A-T E-H A-L A-O A-K A-H A-W R-N SERIES 1-800-265-8772 CVI, Hi-Torquer, and Spinwall Technology are Trademarks of Avibank Mfg., Inc. A-W Series, AVK and are Registered Trademarks of Avibank Mfg., Inc. A-L Series, A-K Series, A-H Series, A-R Series, A-S Series, A-T Series, A-O Series, R-N Series, E-L Series, E-H Series, One-Set, OST, PreSet, SPP2 Tool, SPP3 Tool Data Master, NEW NEW

CCATALOGATALOG 1144 C 182017Jan Introduction auxproduitsAVK AVK C126 INSTALLATION TOOLTYPES brass and302stainlesssteel. resistance. Availableinsteel, exceptional spinout punched holesprovides Hex Bodythreadedinsertfor SPINWALL TECHNOLOGY™PRODUCTDESIGN Here ishowtheAVKproductinstalled“blind.” INSTALLATION SEQUENCE threaded mandrel. fastener ontothetool’s 1/4 turntheAVK field installations. for lowerconsumercostor your productwhicheliminatestheneedforthreadmasking. parent materialvariesinthickness.Ourproductscanbeinstalledafterpaintorotherfinishesisappliedto operated orpneumatichandheldtoolsrightonyourassemblylinewithoutadjustmentevenifthe threaded studs.Bothproductscanbeinstalledintoaflat,tubularorothershapedmaterialsusinghand Technology™ blindinstalledfastenersconsistoftwotypes.Internallythreadedinsertsandexternally blind installedfastenermanufacturers.Theyrefertothisas“SpinwallTechnology™.”AVK’sSpinwall AVK hasdevelopedspecificmanufacturingtechnologythatsetsourproductsapartfromother The expendabletoolisused ® ProductIntroduction L’utilisation est soumise aux Conditions d’utilisation disponibles duCatalogue sur Spaenaur.com etàla page et TC4 àla inTC5 de ce catalogue. Inc. © 2018Spaenaur Subject toCatalog Terms andConditions available ofUse atSpaenaur.com and onpage and TC2 atthebackTC3 ofthis catalog. Inc. © 2018Spaenaur P :

monel. steel, aluminum,brass,and punched holes.Availablein resistance indrilledor insert forexcellentspinout Round serratedbodythreaded F :

1- [email protected] 888-252-638 properly. fastener isinstalled depressed andthe The forwardtriggeris 0

ww w . SpaenaurHome line work. tool isusedforproduction The pneumaticandbattery

tions. Availableinsteel. and thinsheetmetalapplica- holes inplastics,composites resistance indrilledorpunched for exceptionalpullout Pre-Bulbed slottedbodydesign

.co the installedfastener. tool unthreadsfrom depressed andthe The reversetriggeris m FullSpaenaur Catalog used forinstallations Automation systemcanbe conventional hardware. is thenattachedusing The matingcomponent AVK ContactUs ® isaregisteredtrademark of AVIBANK MFG., INC. Français

CCATALOGATALOG 1144 C MC C127 Français 23 Jan 2018 23 m co . Contact Us Contact

SPINWALL TECHNOLOGY SPINWALL

SPINWALL TECHNOLOGY™ SPINWALL Depress the lower trigger and the tool unthreads from the installed part. . Depress the tool reverse trigger and the tool spins out of the installed fastener. w ww

0 Full Spaenaur Catalog Spaenaur Full 1-888-252-638

: F

Spaenaur Home Spaenaur 2 All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous Labor savings Single or multi-simultaneous insert installation Maximum up-time providing optimal production output Multiple work station configurations are available Robotic arm with hole locating vision system is available Insert collapse load can be verified Automation benefits are as follows: Depress the top trigger until the tool stalls and the AVK fastener is collapsed. Depress the tool trigger and the tool spins into the fastener and automatically exerts a pressure controlled pull installing the fastener. 1-800-265-877

: P Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation [email protected] Spinwall Technology™ ...Sets AVK apart ...Sets AVK Technology™ Spinwall three different types of installation tooling... three different . 1-800-265-8772 Our Spinwall Technology™ products can be installed using Technology™ products can Our Spinwall utilizes an ARO pneumatic stall torque tool and incorporates an integrated hydraulic cylinder utilizes an ARO pneumatic stall torque ™ mandrel and place the ™ 1/4 turn the fastener onto the ARO tool mandrel and place the fastener into the hole. 1/4 turn the fastener onto the SPP Tool fastener into the hole is a registered trademark ® You will notice throughout these pages references to the phrase Spinwall Technology™. This phrase This phrase Spinwall Technology™. to the phrase these pages references throughout You will notice systems. and installation design, manufacturing AVK’s product’s the philosophy of describes forming equipment high-speed, state-of-the-art cold products are manufactured on Spinwall Technology™ with unique allows AVK to produce products tolerances are achieved. This capability on which very precise to backside flange the AVK product filling the hole prior properties that result in mechanical and installation on the separate of Spinwall Technology™ about hole fill and the other advantages formation. Read more product profile pages. 1 2 3 1 2 3 powered by a remote hydraulic power pack system. powered by a remote hydraulic power The SPP Tool AUTOMATION AVK SPP TOOL™ - SPIN PULL TO PRESSURE AVK SPP TOOL™ - SPIN ARO PNEUMATIC STALL TORQUE TOOL ARO PNEUMATIC STALL The ARO pneumatic stall torque type tool installs AVK as follows… The ARO pneumatic stall torque type AVIBANK MFG., INC. AVK of CCATALOGATALOG 1144 C 182018Jan C128 Inserts Inserts DESIGN BENEFITS ADDITIONAL DESIGNTYPES CLOSED END C129. tion. Seepage side oftheapplica- threads fromeither leakage pastthe enclosed eliminating Thread areais internal rolledthreadmanufacturingprocess. SUPERIOR THREADSTRENGTHisprovidedduetothe tools andourpneumatic/hydraulicSPP2Tool™. materials areassuredbyAVK’sspin/spinAROpneumatic QUALITY INSTALLATIONSeveninvariablethickness radius hexbodyinsert. hex hole.ThisispossiblewhenusingtheA-HSeries punch anddielifebyspecifyingaradiuscornerinyour AVOID STRESSFRACTURESofyourmaterialandprolong THE HOLE. achieved astheA-HSeries’hexbodyexpandsFILLING EXCEPTIONAL resistancetospinninginthepanelis L’utilisation est soumise aux Conditions d’utilisation disponibles duCatalogue sur Spaenaur.com etàla page et TC4 àla inTC5 de ce catalogue. Inc. © 2018Spaenaur Subject toCatalog Terms andConditions available ofUse atSpaenaur.com and onpage and TC2 atthebackTC3 ofthis catalog. Inc. © 2018Spaenaur P :

1- 800 Tousécrite Inc. deSpaenaur l’autorisationne peut êtrereproduit, entoutoupartie, sans droitsLe catalogue réservés. 1-800-265-8772 Inc.of Spaenaur permissionthe written part, without orinwhole in be reproduced, not may Catalog reserved. All rights - 265-877 A-H SERIES Grade 5or exceptional resistancetospinninginthepanel.TheA-HSeriesisdesignedbeusedwith hex hole,theradiuscornersofA-HSeriesInsertexpandandfillholeproviding The line. TheA-HSeriesInsertcanbeinstalledeitherbeforeorafterfinish. pneumatic/hydraulic tooling.Thesetoolscanbelocatedatanypositiononyourassembly The A-HSeriesInsertcanbeinstalledusingAVK’sARObrandpneumatictoolsorSPP™ THE HOLE. resistance. and vibration torque strength exceptional feature provides expands hex body radius cornered is installed, the As theA-HSeries A-H SeriesInsert 2

F Metric Class8.8/9.8 : FILLING

1- This [email protected] 888-252-638 closed endversion.) seal. (Alsoavailableinthe provides aweathertight head andwheninstalled to theundersideof A PVCfoamsealisbonded ELDHA OPENEND SEALED HEAD ™ SPINWALL TECHNOLOGY™ featuresaradiuscornerhexbody.Wheninstalledintocorresponding INSERTPROFILE HOW HOLEFILL WORKS FOR YOU 0

ww matingscrews. w . SpaenaurHome

order. ContactSpaenaurSalesDeskfordetails. aluminum, brassandmonelareavailablebyspecial AVAILABLE insteel.Additionalmaterialssuchas protection weofferatrivalenttin/zincalloyfinish. spray towhitecorrosion).Forexceptionalcorrosion standard zinc/yellowtrivalentfinish(120hours.salt SUPERIOR CORROSIONRESISTANCEisprovidedbyAVK’s than conventionalrivetnuts. Series’ widegriprangecapacity.Itis2.5timesgreater INVENTORY REDUCTIONispossiblebecauseoftheA-H area. Threaddilationisprevented. the increasedcross-sectionalthicknessofthread THREADS GAUGEbeforeandafterinstallationdueto

.co m FullSpaenaur Catalog details. Sales Deskfor contact Spaenaur ranges only.Please in specificthread body insertavailable Stainless SteelHex AVK ContactUs ® isaregisteredtrademark ADJUSTMENT. WITHOUT materials thickness or variable even inmultiple backside flange forming a install theinsert continues to tool then The installation of Pouce et AVIBANK MFG., INC. Inch and Français Métrique Metric

CATALOGCATALOG 1144 1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français

Inch and Metric Inserts Pouce et Métrique Inserts UNIFIED (INCH) AND METRIC THREAD SIZES

OPEN END TYPE HOLE DETAIL HH HD D

IL L GRIP RANGE NOTE: FOR C RADIUS CORNER, SEE R DIM. Thread Specifications: Unified 2B/21 per ASME B1.1 Metric 6H/21 per ASME B1.13M

STEEL ZINC TRIVALENT HOLE SIZE HD SPAENAUR MANUFACTURER THREAD THREAD GRIP GRIP HH L D IL LB ILB IATD** R PKG ACROSS FLATS ±.010 No. No. SIZE CALL OUT RANGE CALL OUT +.004 / .000 ±.025* ±.003 ±.015 MAX. MAX. MAX. MAX. MAX. MAX. QTY. 215A911N AHS3T-632-80 6-32 UNC 632 .020 - .080 80 .250 .375 .027 .385 .249 .295 .755 .640 .575 .015 100 215A081X AHS3T-832-80 8-32 UNC 832 .020 - .080 80 .250 .375 .027 .385 .249 .295 .755 .640 .575 .015 100 215A921T AHS3T-1024-130 10-24 UNC 1024 .020 - .130 130 .281 .390 .027 .435 .280 .275 1.045 .845 .695 .020 100 215A931K AHS3T-1032-130 10-32 UNF 1032 .020 - .130 130 .281 .390 .027 .435 .280 .275 1.045 .845 .695 .020 100 215A361P AHS3T-420-165 1/4-20 UNC 420 .027 - .165 165 .375 .510 .030 .585 .374 .400 1.205 1.015 .945 .040 100 215A951M AHS3T-518-150 5/16-18 UNC 518 .027 - .150 150 .500 .655* .035 .685 .499 .530 1.460 1.235 1.045 .040 100 215A961X AHS3T-518-312 5/16-18 UNC 518 .150 - .312 312 .500 .655* .035 .845 .499 .515 1.460 1.220 1.170 .040 100 215A011Y AHS3T-616-150 3/8-16 UNC 616 .027 - .150 150 .500 .655* .035 .685 .499 .530 1.460 1.235 1.045 .040 100

HOLE SIZE HD SPAENAUR MANUFACTURER THREAD THREAD GRIP GRIP HH L D IL LB ILB IATD** R PKG ACROSS FLATS ±0.25 No. No. SIZE CALL OUT RANGE CALL OUT +0.10 / 0.00 ±0.64* ±0.08 ±0.38 MAX. MAX. MAX. MAX. MAX. MAX. QTY. 216K411C AHS3T-470-2.0 M4 x 0.7 ISO 470 0.50 - 2.00 2.0 6.35 9.53 0.68 9.78 6.35 7.49 19.18 16.26 14.61 0.38 100 216K421N AHS3T-610-4.2 M6 x 1.0 ISO 610 0.70 - 4.20 4.2 9.53 12.96 0.76 14.86 9.50 10.16 30.61 25.78 24.00 1.00 100 216K431T AHS3T-8125-3.8 M8 x 1.25 ISO 8125 0.70 - 3.80 3.8 12.70 16.64* 0.89 17.40 12.70 13.46 37.08 31.37 26.54 1.00 100 216K232X AHS3T-1015-3.8 M10 x 1.5 ISO 1015 0.70 - 3.80 3.8 12.70 16.64* 0.89 17.40 12.70 13.46 37.08 31.37 26.54 1.00 100

NOTE 1: Grip range can be affected by parent material density and actual hole size. AVK suggests trial installations to determine optimum grip. NOTE 2: Additional UNF fine threads are available. Contact Spaenaur Sales Desk for details. NOTE 3: Additional grip lengths are available in certain thread sizes. Contact Spaenaur Sales Desk for details. **Dimensions in minimum grip condition. NOTE 4: Additional materials are available – Aluminum 5056, Brass 270/260, Monel 400 & CRES 302. NOTE 5: Additional finishes are available – Yellow Zinc Trivalent & Tin Zinc Trivalent. NOTE 6: Also available in Closed End Type.

CLOSED END TYPE HH

IATD LB ILB C CATALOG 14 AT ALOG 1 4

For air tool selection see pages C144-C146

® AVK is a registered trademark © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. SubjectP: 1-800-265-877 to Catalog Terms and Conditions2 ofF :Use 1-888-252-638 available at Spaenaur.com and0 on pageww TC2w and. TC3 at the back of this catalog. .com of AVIBANK MFG., INC. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. C129 L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue. 18 Jan 2018 C 182018Jan Inserts C130 Inserts ADDITIONAL DESIGNTYPES DESIGN BENEFITS CLOSED END application. SeepageC131. threads fromeithersideofthe eliminating leakagepastthe Thread areaisenclosed Thread dilationisprevented. increased cross-sectionalthicknessofthethreadarea. THREADS GAUGEbeforeandafterinstallationduetothe internal rolledthreadmanufacturingprocess. SUPERIOR THREADSTRENGTHisprovidedduetothe tools andourpneumatic/hydraulicSPP2Tool™. materials areassuredbyAVK’sspin/spinAROpneumatic QUALITY INSTALLATIONSeveninvariablethickness insert’s knurledbodyexpands EXCEPTIONAL TORQUESTRENGTHisachievedasthe head profile. special holepreparationduetotheA-KSeriesminimal VIRTUALLY FLUSHINSTALLATIONSareachievedwithout L’utilisation est soumise aux Conditions d’utilisation disponibles duCatalogue sur Spaenaur.com etàla page et TC4 àla inTC5 de ce catalogue. Inc. © 2018Spaenaur Subject toCatalog Terms andConditions available ofUse atSpaenaur.com and onpage and TC2 atthebackTC3 ofthis catalog. Inc. © 2018Spaenaur P :

1- 800 Tousécrite Inc. deSpaenaur l’autorisationne peut êtrereproduit, entoutoupartie, sans droitsLe catalogue réservés. 1-800-265-8772 Inc.of Spaenaur permissionthe written part, without orinwhole in be reproduced, not may Catalog reserved. All rights - 265-877 The A-KSeriesisdesignedtobeusedwithGrade5or flush installation.Countersinkdrillingordimplingoftheparentmaterialcanbeeliminated. The line. TheA-KSeriesInsertcanbeinstalledeitherbeforeorafterfinish. pneumatic/hydraulic tooling.Thesetoolscanbelocatedatanypositiononyourassembly The A-KSeriesInsertcanbeinstalledusingAVK’sARObrandpneumatictoolsorSPP™ A-K SERIES resistance. and vibration torque strength exceptional feature provides HOLE. This FILLING THE expands 360° body knurled is installed, the As theA-KSeries A-K Series 2

FILLING THEHOLE. F :

1- [email protected] 888-252-638 Insertfeaturesaknurledbodyandreducedprofileheadtoallowforvirtually SPINWALL TECHNOLOGY™ ™ INSERTPROFILE HOW HOLEFILL WORKS FOR YOU 0

ww w . SpaenaurHome

order. ContactSpaenaurSalesDeskfordetails. aluminum, brassandmonelareavailablebyspecial AVAILABLE insteel.Additionalmaterialssuchas protection weofferatrivalenttin/zincalloyfinish. spray towhitecorrosion).Forexceptionalcorrosion standard zinc/yellowtrivalentfinish(120hours.Salt SUPERIOR CORROSIONRESISTANCEisprovidedbyAVK’s than conventionalrivetnuts. Series’ widegriprangecapacity.Itis2.5timesgreater INVENTORY REDUCTIONispossiblebecauseoftheA-K

.co m FullSpaenaur Catalog Metric Class8.8/9.8 AVK matingscrews. ContactUs ® isaregisteredtrademark of ADJUSTMENT. WITHOUT materials thickness or variable even inmultiple backside flange forming a install theinsert continues to tool then The installation Pouce et AVIBANK MFG., INC. Inch and Français Métrique Metric

CCATALOGATALOG 1144 1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français

Inch and Metric Inserts Pouce et Métrique Inserts UNIFIED (INCH) AND METRIC THREAD SIZES

EPYT DNE NEPO DNE EPYT DESOLC DNE EPYT HH HD HH

IATD L D IL GRIP D RANGE LB ILB C Thread Specifications: Unified 2B/21 per ASME B1.1 Metric 6H/21 per ASME B1.13M STEEL ZINC TRIVALENT

SPAENAUR MANUFACTURER THREAD GRIP HOLE SIZE HD HH L D IL LB ILB IATD* PKG No. No. SIZE RANGE +.006 / .000 ±.015 ±.003 ±.015 MAX. MAX. MAX. MAX. MAX. QTY.

215-A26-1C AKS3T-632-130 6-32 UNC .020 - .080 17/64 (.2656) .310 .019 .420 .265 .305 .755 .640 .610 100 215-A72-1X AKS3T-632-80 6-32 UNC .080 - .130 17/64 (.2656) .310 .019 .470 .265 .305 .755 .580 .670 100 215-A23-1A AKS3T-832-130 8-32 UNC .080 - .130 17/64 (.2656) .310 .019 .470 .265 .305 .755 .580 .670 100 215-A43-1K AKS3T-1024-130 10-24 UNC .020 - .130 19/64 (.2969) .340 .019 .475 .296 .315 1.005 .845 .730 100 215-A04-1T AKS3T-1032-130 10-32 UNF .020 - .130 19/64 (.2969) .340 .019 .475 .296 .315 1.005 .845 .730 100 215-A13-1Y AKS3T-1032-225 10-32 UNF .130 - .225 19/64 (.2969) .340 .019 .585 .296 .315 1.005 .735 .840 100 215-A34-1X AKS3T420-165 1/4-20 UNC .027 - .165 25/64 (.3906) .455 .023 .580 .390 .380 1.205 1.005 .895 100 215-A38-1C AKS3T-420-260 1/4-20 UNC .165 - .260 25/64 (.3906) .455 .023 .680 .390 .380 1.205 .905 1.035 100 215-A29-1K AKS3T-428-165 1/4-28 UNF .027 - .165 25/64 (.3906) .455 .023 .580 .390 .380 1.205 1.005 .895 100 215-A51-1Y AKS3T-428-260 1/4-28 UNF .165 - .260 25/64 (.3906) .455 .023 .680 .390 .380 1.205 .905 1.035 100 215-A31-1Y AKS3T-518-150 5/16-18 UNC .027 - .150 17/32 (.5312) .595 .023 .690 .530 .470 1.405 1.175 .995 100 215-A57-1M AKS3T-524-312 5/16-24 UNF .150 - .312 17/32 (.5312) .595 .023 .805 .530 .425 1.405 1.025 1.120 100 215-A41-1N AKS3T-616-150 3/8-16 UNC .027 - .150 17/32 (.5312) .595 .023 .690 .530 .470 1.405 1.175 .995 100 215-A09-1A AKS3T-616-312 3/8-16 UNC .150 - .312 17/32 (.5312) .595 .023 .805 .530 .425 1.405 1.025 1.120 100

SPAENAUR MANUFACTURER THREAD GRIP HOLE SIZE HD HH L D IL LB ILB IATD* PKG No. No. SIZE RANGE +0,15 / 0.00 ±0.38 ±0.08 ±0.38 MAX. MAX. MAX. MAX. MAX. QTY. 216-K11-1X AKS3T-470-2.0 M4 x 0.7 ISO 0.50 - 2.00 6.75 7.87 0.48 10.67 6.73 7.75 19.18 16.26 15.49 100 216-K07-1W AKS3T-470-3.3 M4 x 0.7 ISO 2.00 - 3.30 6.75 7.87 0.48 11.94 6.73 7.75 19.18 14.73 17.02 100 216-K01-1P AKS3T-580-3.3 M5 x 0.8 ISO 0.50 - 3.30 7.60 8.64 0.48 12.07 7.52 8.00 25.53 21.46 18.54 100 216-K13-1P AKS3T-610-4.2 M6 x 1.0 ISO 0.70 - 4.20 10.00 11.56 0.58 14.73 9.91 9.65 30.61 25.53 22.73 100 216-K09-1X AKS3T-8125-3.8 M8 x 1.25 ISO 0.70 - 3.80 13.50 15.11 0.58 17.53 13.46 11.94 35.69 29.85 25.27 100 216-K35-1X AKS3T-1015-3.8 M10 x 1.5 ISO 0.70 - 3.80 13.50 15.11 0.58 17.53 13.46 11.94 35.69 29.85 25.27 100 216-K36-1A AKS3T-1015-7.9 M10 x 1.5 ISO 3.80 - 7.90 13.50 15.11 0.58 20.45 13.46 10.80 35.69 26.04 28.45 100

NOTE 1: Grip range can be affected by parent material density and actual hole size. AVK suggests trial installations to determine optimum grip. NOTE 2: Additional UNF fine threads are available. Contact Spaenaur Sales Desk for details. NOTE 3: Additional grip lengths are available. Contact Spaenaur Sales Desk for details. *Dimensions in minimum grip condition. NOTE 4: Additional materials are available – Aluminum 5056, Brass 270/260, Monel 400. NOTE 5: Additional finishes are available – Yellow Zinc Trivalent & Tin Zinc Trivalent. For air tool selection NOTE 6: Also available in Closed End Type. see pages C144-C146

ASSORTMENT ASSORTIMENT 805-663A C CATALOG 14 AT ALOG 1 A-K™ SERIES INSERTS Furnished in LARGE SIZE Steel drawer which will fit into Slide 4 16 SIZES - 331 PIECES Racks shown on page A3 Shipping Weight: 2.6 kg (5.75 lbs.)

For the complete assortment contents turn to A67

1- 800 Tousécrite Inc. deSpaenaur l’autorisationne peut êtrereproduit, entoutoupartie, sans droitsLe catalogue réservés. 1-800-265-8772 Inc.of Spaenaur permissionthe written part, without orinwhole in be reproduced, not may Catalog reserved. All rights - 265-877 A-L SERIES line. TheA-LSeriescanbeinstalledeitherbeforeorafterfinish. pneumatic/hydraulic tooling.Thesetoolscanbelocatedatanypositiononyourassembly The A-LSeriesInsertcanbeinstalledusingAVK’sARObrandpneumatictoolsorSPP™ Series isAVK’smostversatileperformer. istics andhasbeendesignedtobeusedwithGrade5or it idealforuseinpunchedordrilledholes.Itoffersthehighestallaroundstrengthcharacter- The expands 360° body knurled is installed, the As theA-LSeries HOLE. FILLING THE resistance. and vibration torque strength exceptional feature provides A-L SeriesInsert This 2

FILLING THEHOLE. F :

1- [email protected] 888-252-638 closed endversion.) seal. (Alsoavailableinthe provides aweathertight head andwheninstalled to theundersideof A PVCfoamsealisbonded SPINWALL TECHNOLOGY™ ™ featuresaknurledbodyandlargediameter—lowprofileheadmaking INSERTPROFILE HOW HOLEFILL WORKS FOR YOU 0 D A E H D EL A ES

ww w . SpaenaurHome

.co m FullSpaenaur Catalog Metric 8.8/9.8 Desk fordetails. Spaenaur Sales applications. Contact electrical grounding and isexcellentfor soft orthinmaterials capability, especiallyin even greatertorque under theheadprovides The additionofwedges DAEH EGDEW matingscrews.TheA-L AVK ContactUs ® isaregisteredtrademark of ADJUSTMENT. WITHOUT materials thickness or variable even inmultiple backside flange forming a install theinsert continues to tool then The installation Pouce et AVIBANK MFG., INC. Inch and Français Métrique Metric

CCATALOGATALOG 1144 1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français

Inch and Metric Inserts Pouce et Métrique Inserts UNIFIED (INCH) AND METRIC THREAD SIZES EPYT DNE NEPO DNE EPYT DESOLC DNE EPYT SERIES HH HD HH

IATD L D IL GRIP D RANGE LB ILB

Thread Specifications: Unified 2B/21 per ASME B1.1 C Metric 6H/21 per ASME B1.13M STEEL ZINC TRIVALENT HD SPAENAUR SUPPLIER THREAD THREAD GRIP GRIP HOLE SIZE PKG ±.010 HH L D IL LB ILB IATD** No. No. SIZE CALL OUT RANGE CALL OUT +.006 / .000 ±.025* ±.003 ±.015 MAX. MAX. MAX. MAX. MAX. QTY. 215-A49-1Y ALS3T-632-80 6-32 UNC 632 .020 - .080 80 17/64 (.2656) .390 .030 .420 .265 .305 .755 .640 .610 100 215-A07-1M ALS3T-632-130 6-32 UNC 632 .080 - .130 130 17/64 (.2656) .390 .030 .470 .265 .305 .755 .580 .670 100 215-A10-1X ALS3T-832-80 8-32 UNC 832 .020 - .080 80 17/64 (.2656) .390 .030 .420 .265 .305 .755 .640 .610 100 215-A17-1K ALS3T-832-130 8-32 UNC 832 .080 - .130 130 17/64 (.2656) .390 .030 .470 .265 .305 .755 .580 .670 100 215-A21-1M ALS3T-1024-130 10-24 UNC 1024 .020 - .130 130 19/64 (.2969) .415 .030 .475 .296 .315 1.005 .845 .730 100 215-A03-1N ALS3T-1024-225 10-24 UNC 1024 .130 - .225 225 19/64 (.2969) .415 .030 .585 .296 .315 1.005 .735 .840 100 215-A22-1X ALS3T-1032-130 10-32 UNF 1032 .020 - .130 130 19/64 (.2969) .415 .030 .475 .296 .315 1.005 .845 .730 100 215-A35-1A ALS3T-1032-225 10-32 UNF 1032 .130 - .225 225 19/64 (.2969) .415 .030 .585 .296 .315 1.005 .735 .840 100 215-A32-1W ALS3T-420-165 1/4-20 UNC 420 .027 - .165 165 25/64 (.3906) .500 .030 .580 .390 .380 1.205 1.005 .895 100 215-A50-1P ALS3T-420-260 1/4-20 UNC 420 .165 - .260 260 25/64 (.3906) .500 .030 .680 .390 .380 1.205 .905 1.035 100 215-A48-1P ALS3T-428-165 1/4-28 UNC 428 .027 - .165 165 25/64 (.3906) .500 .030 .580 .390 .380 1.205 1.005 .895 100 215-A60-1X ALS3T-428-260 1/4-28 UNF 428 .165 - .260 260 25/64 (.3906) .500 .030 .680 .390 .380 1.205 .905 1.035 100 215-A40-1C ALS3T-518-150 5/16-18 UNC 518 .027 - .150 150 17/32 (.5312) .685* .035 .690 .530 .470 1.405 1.175 .995 100 215-A02-1C ALS3T-518-312 5/16-18 UNC 518 .150 - .312 312 17/32 (.5312) .685* .035 .805 .530 .425 1.405 1.025 1.120 100 215-A68-1W ALS3T-524-150 5/16-24 UNF 518 .027 - .150 150 17/32 (.5312) .685* .035 .690 .530 .470 1.405 1.175 .995 100 215-A69-1M ALS3T-524-312 5/16-24 UNF 518 .150 - .312 312 17/32 (.5312) .685* .035 .805 .530 .425 1.405 1.025 1.120 100 215-A52-2C ALS3T-616-150 3/8-16 UNC 616 .027 - .150 150 17/32 (.5312) .685* .035 .690 .530 .470 1.405 1.175 .995 100 215-A05-1K ALS3T-616-312 3/8-16 UNC 616 .150 - .312 312 17/32 (.5312) .685* .035 .805 .530 .425 1.405 1.025 1.120 100 215-A70-1W ALS3T-624-150 3/8-24 UNF 624 .027- .150 150 17/32 (.5312) .685* .035 .690 .530 .470 1.405 1.175 .995 100 215-A58-1X ALS3T-624-312 3/8-24 UNC 624 .150 - .312 312 17/32 (.5312) .685* .035 .805 .530 .425 1.405 1.025 1.120 100

HD SPAENAUR SUPPLIER THREAD THREAD GRIP GRIP HOLE SIZE PKG ±0.25 HH L D IL LB ILB IATD** No. No. SIZE CALL OUT RANGE CALL OUT +0.15 / 0.00 ±0.64* ±0.08 ±0.38 MAX. MAX. MAX. MAX. MAX. QTY. 216-K25-1P ALS3T-470-2.0 M4 x 0.7 ISO 470 0.50 - 2.00 2.0 6.75 9.91 0.76 10.67 6.73 7.75 19.18 16.26 15.49 100 216-K26-1Y ALS3T-470-3.3 M4 x 0.7 ISO 470 2.00 - 3.30 3.3 6.75 9.91 0.76 11.94 6.73 7.75 19.18 14.73 17.02 100 216-K27-1C ALS3T-580-3.3 M5 x 0.8 ISO 580 0.50 - 3.30 3.3 7.60 10.54 0.76 12.07 7.52 8.00 25.53 21.46 18.54 100 216-K16-1N ALS3T-580-5.7 M5 x 0.8 ISO 580 3.30 - 5.70 5.7 7.60 10.54 0.76 14.86 7.52 8.00 25.53 18.67 21.34 100 216-K03-1C ALS3T-610-4.2 M6 x 1.0 ISO 610 0.70 - 4.20 4.2 10.00 12.70 0.76 14.73 9.91 9.65 30.61 25.53 22.73 100 216-K02-1Y ALS4-610-6.6 M6 x 1.0 ISO 6104.20 - 6.60 6.6 10.00 12.700.76 17.27 9.91 9.65 30.23 22.99 26.29 100 216-K04-1N ALS3T-8125-3.8 M8 x 1.25 ISO 8125 0.70 - 3.80 3.8 13.50 17.40* 0.89 17.53 13.46 11.94 35.69 29.85 25.27 100 216-K28-1N ALS3T-8125-7.9 M8 x 1.25 ISO 8125 3.80 - 7.90 7.9 13.50 17.40* 0.89 20.45 13.46 10.80 35.69 26.04 28.45 100 216-K05-1T ALS3T-1015-3.8 M10 x 1.5 ISO 1015 0.70 - 3.80 3.8 13.50 17.40* 0.89 17.53 13.46 11.94 35.69 29.85 25.27 100 216-K15-1C ALS3T-1015-7.9 M10 x 1.5 ISO 1015 3.80 - 7.90 7.9 13.50 17.40* 0.89 20.45 13.46 10.80 35.69 26.04 28.45 100 NOTE 1: Grip range can be affected by parent material density and actual hole size. AVK suggests trial installations to determine optimum grip. NOTE 2: Additional UNF fine threads are available. Contact Spaenaur Sales Desk for details. NOTE 3: Additional grip lengths are available. Contact Spaenaur Sales Desk for details. **Dimensions in minimum grip condition. NOTE 4: Additional materials are available – Aluminum 5056, Brass 270/260, Monel 400 & CRES 302. For air tool selection NOTE 5: Additional finishes are available – Yellow Zinc Trivalent & Tin Zinc Trivalent. NOTE 6: Also available in Closed End Type. see pages C144-C146 C CATALOG 14 AT

ALOG 1 ASSORTMENT ASSORTIMENT 805-664B Furnished in LARGE SIZE Steel

4 drawer which will fit into Slide A-L™ SERIES INSERTS Racks shown on page A3 Shipping Weight: 5.5 kg (12.1 lbs.) 16 SIZES — 331 PIECES

For the complete assortment contents turn to A67

Inserts Inch and Metric Inserts Pouce et Métrique A-O SERIES™ PROFILE The A-O Series Insert features a reduced profile head design which is similar to the superior A-K Series Insert. It also has a smaller body diameter than the A-K Series Insert. The A-O Series Insert can be specified when the application design parameters require a smaller hole or closer hole to edge tolerances. The A-O Series can be installed with AVK’s ARO brand pneumatic tools or AVK’s pneumatic/hydraulic SPP2 Tool™. These tools can be located at any position on your C assembly line. The A-O Series can be installed either prior to or after finish further enhancing its flexibility in your manufacturing environment.

UNIFIED (INCH) AND METRIC THREAD HH HD

IL GRIP L RANGE

Thread Specifications: Unified 2B/21 per ASME B1.1 D Metric 6H/21 per ASME B1.13M

STEEL ZINC TRIVALENT

SPAENAUR MANUFACTURER THREAD THREAD GRIP HOLE SIZE HD HH L D IL PKG GRIP RANGE No. No. SIZE CALL OUT CALL OUT +.006 / .000 ±.010 ±.003 ±.015 MAX. MAX. QTY.

215-A88-1C AOS3T-632-80 6-32 UNC 632 .020 - .080 80 1/4 (.250) .295 .018 .385 .249 .315 100 215-A53-1N AOS3T-832-80 8-32 UNC 832 .020 - .080 80 1/4 (.250) .295 .018 .385 .249 .315 100 215-A71-1M AOS3T-1032-130 10-24 UNC 1024 .020 - .130 130 9/32 (.2812) .320 .020 .440 .280 .330 100 215-A39-1N AOS3T-420-165 1/4-20 UNC 1032.030 - .165 130 9/32 (.2812) .320 .020 .440 .280 .330 100 215-A59-1A AOS3T-428-165 1/4-20 UNF 420 .030 - .165 165 3/8 (.375) .425 .022 .580 .374 .440 100 215-A89-1N AOS3T-524-200 5/16-24 UNC 518 .040 - .200 200 1/2 (.500) .560 .022 .690 .499 .540 100 215-A25-1Y AOS3T-616-200 3/8-16 UNC 616 .040 - .200 200 1/2 (.500) .560 .022 .690 .499 .540 100

SPAENAUR MANUFACTURER THREAD THREAD GRIP HOLE SIZE HD HD L D IL PKG GRIP RANGE No. No. SIZE CALL OUT CALL OUT +0.15 / 0.00 ±0.25 ±0.08 ±0.38 MAX. MAX. QTY.

216-K08-1M AOS3T-470-2.0 M4 x 0.7 ISO 470 0.50 - 2.00 2.0 6.4 7.49 0.46 9.78 6.32 8.00 100 216-K10-1M AOS3T-580-3.3 M5 x 0.8 ISO 580 0.50 - 3.30 3.3 7.2 8.13 0.51 11.18 7.11 8.38 100 216-K21-1W AOS3T-610-4.2 M6 x 1.0 ISO 610 0.76 - 4.20 4.2 9.6 10.80 0.56 14.73 9.50 11.18 100 216-K39-1C AOS3T-8125-5.1 M8 x 1.25 ISO 8125 1.02 - 5.10 5.1 12.7 14.22 0.56 17.53 12.67 13.72 100 216-K40-1Y AOS3T-1015-5.10 M10 x 1.5 ISO 1015 1.02 - 5.10 5.1 12.7 14.22 0.56 17.53 12.67 13.72 100

NOTE 1: Grip range can be affected by parent material density and actual hole size. AVK suggests trial installations to determine optimum grip.

NOTE 2: Additional UNF fine threads are available. Contact Spaenaur Sales Desk for details. 4 NOTE 3: Additional finishes are available – Yellow Zinc Trivalent & Tin Zinc Trivalent. ALOG 1 AT CATALOG 14 C CATALOG

For air tool selection see pages C144-C146

® © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. AVK is a registered trademark Subject to CatalogP: 1- Terms800 and- Conditions265-877 of Use 2available F: at1- Spaenaur.com888-252-638 and on page TC20 and ww TC3 wat the. back of this catalog. .com C134 © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. of AVIBANK MFG., INC. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue. 23 Jan 2018 C Inserts Inserts C135 Français 18 Jan 2018 18 m co . Contact Us Contact

. w swaging ° ww

As this occurs a As 360 action takes anchoring place A-T Series Insert in the parent material.

. 0 Full Spaenaur Catalog Spaenaur Full .76 mm NOT RECOMMENDED RECOMMENDED 1-888-252-638

: INSTALLS INTO MOST ANY MATERIAL with a thickness INSTALLS INTO MOST ANY MATERIAL with over .030/ 12.9 SCREWS CAN BE USED WITH GRADE 8/METRIC CLASS due to the A-T Series high shear load capability. Series 304 AVAILABLE in Steel, Aluminum, Brass and Contact Stainless Steel are available by special order. Spaenaur Sales Desk for details. F

Spaenaur Home Spaenaur AVK recommends that the mating part comes in contact with the head of the A-T Series Insert. If a gap or clearance hole exists between the mating part and the A-T Series Insert, the threaded nut portion may rotate or pull through the parent material. 2 All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous 1-800-265-877 mating screws.

: SWAGING P Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation ). ° PROFILE [email protected] ™ Metric 12.9 360 HOW IT WORKS FOR YOU WORKS FOR HOW IT C143 and C145 is unique in that it can be installed into most any material above into most any in that it can be installed is unique 1-800-265-8772 in thickness. As the A-T Series is installed, the threaded portion is is installed, the threaded As the A-T Series in thickness. Metric INVENTORY REDUCTION is possible because one A-T INVENTORY REDUCTION is possible because Series Insert will work in any thickness. REDUCED OVERALL LENGTH of the installed A-T REDUCED OVERALL LENGTH of the installed clearance Series Insert allows it to be used in limited applications. thickness QUALITY INSTALLATIONS even in variable stall materials are assured by our spin/spin torque tools (featured on page Métrique Thread area is enclosed eliminating leakage past the threads from either side of the application. .76 mm CLOSED END DESIGN BENEFITS A-T Series Insert A-T Series ADDITIONAL DESIGN TYPES DESIGN PRACTICES JOINT is a registered trademark ® As the A-T As Series Insert is the installed, nut threaded portion is the into drawn upper sleeve portion. A-T SERIES INSERT A-T SERIES completely swaged 360° into the sleeve portion and the hole. This permits the A-T 360° into the sleeve portion and the completely swaged Grade 8/ Series to be used with The A-T Series Insert is installed using lightweight, handheld pneumatic ARO tools that is installed using lightweight, handheld The A-T Series Insert sequence. The A-T Series position in your product’s assembly can be located at any either prior to or after finish. Insert can be installed .030/ The AVIBANK MFG., INC. Pouce et Inch and Inch and AVK of CCATALOGATALOG 1144 1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français

Inserts Inch and Metric Inserts Pouce et Métrique UNIFIED (INCH) AND METRIC THREAD SIZES

EPYT DNE NEPO DNE EPYT DESOLC DNE EPYT HD HD

HOLE IL IATD DEPTH ILB L D D GRIP LB RANGE BLIND HOLE C STEEL TIN ZINC TRIVALENT SPAENAUR MANUFACTURER THREAD HD L D IL HOLE DEPTH PKG MATERIAL TYPE No. No. SIZE ±.005 ±.015 MAX. REF. MIN. QTY. IDENTIFICATION GROOVES 215-A27-1N ATS9T-440 4-40 UNC .211 .370 .1875 .205 .400 100 All materials for the A-T Series 215-A45-2M ATS9T-632 6-32 UNC .240 .370 .2185 .205 .400 100 when plated look similar. Radial 215-A42-2T ATS9T-832 8-32 UNC .269 .370 .2495 .205 .400 100 grooves are machined into the 215-A63-1T ATS9T-1024 10-24 UNC .306 .370 .2805 .205 .400 100 part for material identification. 215-A64-1C ATS9T-1032 10-32 UNF .306 .370 .2805 .205 .400 100 215-A20-2W ATS9T-420 1/4-20 UNC .400 .515 .3745 .275 .540 100 215-A14-2C ATS9T-518 5/16-18 UNC .528 .615 .4995 .325 .640 100 215-A06-1W ATS9T-616 3/8-16 UNC .588 .745 .5615 .390 .770 100 215-A33-2M ATS9T-813 1/2-13 UNC .800 .935 .7485 .485 .960 100 215-A67-1K ATS9T-820 1/2-20 UNF .800 .935 .7485 .485.960 100

SPAENAUR MANUFACTURER THREAD HD L D IL HOLE DEPTH PKG No. No. SIZE ±0.13 ±0.38 MAX. MAX. MIN. QTY. NONE STEEL 1 STAINLESS 216-K17-1T ATS9T-350 M3 x 0.5 ISO 5.36 9.40 4.76 5.21 10.16 100 2 BRASS 216-K29-1T ATS9T-470 M4 x 0.7 ISO 6.83 9.40 6.34 5.21 10.16 100 3 ALUMINUM 216-K14-1Y ATS9T-580 M5 x 0.8 ISO 7.77 9.40 7.12 5.21 10.16 100 216-K19-1W ATS9T-610 M6 x 1.0 ISO 10.16 13.08 9.51 6.99 13.72 100 216-K30-1N ATS9T-8125 M8 x 1.25 ISO 13.41 15.62 12.69 8.26 16.26 100 216-K18-1K ATS9T-1015 M10 x 1.5 ISO 14.94 18.92 14.26 9.91 19.56 100 216-K31-1T ATS9T-12175 M12 x 1.75 ISO 20.32 23.75 19.01 12.32 24.38 100

FINISH:The standard specified finish for the A-T Series Insert is tin. Alteration to this finish will reduce performance.*THREAD CLASS:The A-T Series Insert’s internal threads are manufactured oversized to compensate for resulting thread portion shrinkage during the installation swaging process. They are not gaugeable prior to or after installation but will be compatible with Class 2A/3A or 6g screws after installation. NOTE 1: Additional materials are available – Aluminum 6061-T6, Brass 360/464 & CRES 304. NOTE 2: Additional finishes are available – CAD Plate, Plain Zinc & Dull Tin. For air tool selection NOTE 3: Also available in Closed End Type. see pages C144-C146

Assortment also contains 8 Conversion Kits from 6-32 to 3/8-16 thread size, & 1 ASSORTMENT installation tool TAA170. ASSORTIMENT 805-665 Furnished in LARGE SIZE Steel drawer which A-O™, A-T™ & A-W® will fit into Slide Racks SERIES INSERTS shown on page A3. 399 PIECES, 29 SIZES Shipping Weight: 5.3 kg (11.6 lbs.) 4 ALOG 1 AT CATALOG 14 CATALOG C

For the complete assortment contents turn to A68

® © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. AVK is a registered trademark Subject to CatalogP: 1- Terms800 and- Conditions265-877 of Use 2available F: at1- Spaenaur.com888-252-638 and on page TC20 and ww TC3 atw the. back of this catalog. .com C136 © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. of AVIBANK MFG., INC. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue. 18 Jan 2018 C Inserts Inserts C137 Français 18 Jan 2018 18 m co . For air tool selection see pages C144-C146 Contact Us Contact

100 100 100 100 100 100 100 100 100 100 100 PKG PKG QTY. QTY. . w ww

.400 .400 .400 .400 .540 .640 .770 MIN. MIN. 10.16 10.16 13.72 19.56 0 HOLE DEPTH HOLE DEPTH Full Spaenaur Catalog Spaenaur Full IL IL .205 .205 .205 .205 .275 .325 .390 5.21 5.21 6.99 9.91 MAX. MAX. D D .233 .264 .295 .295 .389 .528 .590 6.71 7.50 9.88 MAX. MAX. 14.99 1-888-252-638

: L L F .370 .370 .370 .370 .515 .615 .740 9.40 9.40 13.08 18.80 ±0.38 ±.015

Spaenaur Home Spaenaur 2 THREAD HD HD .255 .285 .320 .320 .415 .550 .615 7.24 8.13 10.54 15.62 HOLE ±0.13 ±.005 DEPTH All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous BLIND HOLE 6.75 7.54 9.92 15.00 HOLE SIZE HOLE SIZE 15/64 (.234) 17/64 (.266) 19/64 (.297) 19/64 (.297) 25/64 (.391) 17/32 (.531) 19/32 (.594) +.005 / .000 +0.13 / 0.00 1-800-265-877

METRIC : P Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation 1.57 632 832 420 518 616 470 580 610 1024 1032 1015 THREAD THREAD MIN. CALL OUT CALL OUT [email protected] .062/ MATERIAL THICKNESS NONE 2 STEEL BRASS SIZE SIZE THREAD THREAD 6-32 UNC 8-32 UNC 10-32 UNF 10-24 UNC 1/4-20 UNC 3/8-16 UNC M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO 5/16-18 UNC M10 x 1.5 ISO INSERT PROFILE INSERT can be installed into most any material softer than itself that is thicker itself that is thicker material softer than into most any can be installed IL ® 1-800-265-8772 No. No. . The A-W Series provides exceptional shear strength and pull out in fiberglass and pull out shear strength Series provides exceptional . The A-W D AWS9T-832 AWS9T-420 AWS9T-518 AWS9T-616 AWS9T-470 AWS9T-580 AWS9T-610 AWS9T-632 AWS9T-1024 AWS9T-1032 AWS9T-8125 MANUFACTURER MANUFACTURER 1.57 HD Additional UNF threads are available. Contact Spaenaur Sales Desk for details. MATERIAL TYPE MATERIAL No. No. A-W Series Insert A-W Series Metric Métrique SPAENAUR SPAENAUR 215-A28-1T 215-A30-2T 216-K38-1Y 216-K20-2K 215-A12-2P 215-A24-2P 215-A79-1K 216-K12-2A 215-A15-1N 215-A19-1M 216-K33-1W All materials for the A-W Series when plated look similar. Radial grooves are machined into the part for material identification. L IDENTIFICATION GROOVES IDENTIFICATION THREAD CLASS: The A-W Series Insert’s internal threads are manufactured oversized to compensate for resulting thread portion shrinkage THREAD CLASS: The A-W Series Insert’s internal threads are manufactured oversized to compensate will be compatible with Class 2A/3A or 6g during the installation swaging process. They are not gaugeable prior to or after installation but screws after installation. STEEL TIN ZINC TRIVALENT UNIFIED (INCH) AND UNIFIED (INCH) NOTE 1: NOTE 2: NOTE 3: FINISH: The standard specified finish for the A-W Series Insert is tin. Alteration to this finish will reduce performance. NOTE 3: FINISH: The standard specified finish for the A-W Series Insert is tin. Alteration to this finish NOTE 4: Additional finishes are available – Zinc Trivalent & Yellow Zinc Trivalent. A-W SERIES HOLE SIZE: The A-W Series Insert hole size will be dependent on parent material density. Experimentation is required for optimum HOLE SIZE: The A-W Series Insert hole size will be dependent on parent material density. performance. The than .062/ and plywoods. The brass A-W Series Insert is particularly useful for the fiberglass boat industry. useful for the fiberglass boat industry. brass A-W Series Insert is particularly and plywoods. The pneumatic tools that can be is installed using lightweight, handheld The A-W Series Insert The A-W Series Insert can in your product’s assembly sequence. located at any position to or after finish. be installed either prior is a registered trademark ® AVIBANK MFG., INC. Pouce et Inch and Inch and AVK of CCATALOGATALOG 1144 C Inserts C138 Inserts NEW NOTE 2: NOTE 1:Griprangecanbeaffectedbyparent materialdensityandactualholesize.AVKsuggeststrialinstallationstodetermine optimumgrip. MONEL ZINCTRIVALENT BRASS ZINCTRIVALENT ALUMINUM ZINCTRIVALENT STEEL ZINCTRIVALENT NOTE 3:NotofferedinanyotherFinishes. 216-K57-1W 216-K45-1W 216-K60-1M 216-K58-1M 216-K46-1M 216-K54-1N 216-K66-1N 216-K48-1A 216-K50-1A 216-K62-1A 216-K56-1K 216-K44-1K 216-K49-1P 216-K51-1P 216-K63-1P 216-K52-1Y 216-K64-1Y 216-K61-1X 216-K59-1X 216-K47-1X 216-K53-1C 216-K65-1C 216-K55-1T 216-K67-1T SPAENAUR SPAENAUR SPAENAUR SPAENAUR No. No. No. No. Closed EndTypeandspecialheadconfigurations available.ContactSpaenaurSalesDeskfordetails. L’utilisation est soumise aux Conditions d’utilisation disponibles duCatalogue sur Spaenaur.com etàla page et TC4 àla inTC5 de ce catalogue. Inc. © 2018Spaenaur Subject toCatalog Terms andConditions available ofUse atSpaenaur.com and onpage and TC2 atthebackTC3 ofthis catalog. Inc. © 2018Spaenaur EHM3T-8125-5.5 EHM3T-8125-3.0 MANUFACTURER MANUFACTURER MANUFACTURER MANUFACTURER EHA3T-8125-5.5 EHA3T-8125-3.0 EHB3T-8125-5.5 EHB3T-8125-3.0 EHS3T-8125-5.5 EHS3T-8125-3.0 EHM3T-610-5.5 EHM3T-610-3.0 EHM3T-580-3.0 EHM3T-470-3.0 EHA3T-610-5.5 EHA3T-610-3.0 EHA3T-580-3.0 EHA3T-470-3.0 EHB3T-610-5.5 EHB3T-610-3.0 EHB3T-580-3.0 EHB3T-470-3.0 EHS3T-610-5.5 EHS3T-610-3.0 EHS3T-580-3.0 EHS3T-470-3.0 P :

1- No. No. No. No. 800 Tousécrite Inc. deSpaenaur l’autorisationne peut êtrereproduit, entoutoupartie, sans droitsLe catalogue réservés. 1-800-265-8772 Inc.of Spaenaur permissionthe written part, without orinwhole in be reproduced, not may Catalog reserved. All rights E-H INSERT PROFILE modate line offersinsertdesignstoaccom- Sales Deskfordetails. available. PleasecontactSpaenaur of headconfigurationsarealso Closed endproductandavariety The - 265-877 M8 x1.25ISO M8 x1.25ISO M8 x1.25ISO M8 x1.25ISO M8 x1.25ISO M8 x1.25ISO M8 x1.25ISO M8 x1.25ISO M6 x1.0ISO M6 x1.0ISO M5 x0.8ISO M4 x0.7ISO M6 x1.0ISO M6 x1.0ISO M5 x0.8ISO M4 x0.7ISO M6 x1.0ISO M6 x1.0ISO M5 x0.8ISO M4 x0.7ISO M6 x1.0ISO M6 x1.0ISO M5 x0.8ISO M4 x0.7ISO E-H THREAD THREAD THREAD THREAD SIZE SIZE SIZE SIZE METRIC “true metric” Metric 2

F : CALL OUT CALL OUT CALL OUT CALL OUT

THREAD THREAD THREAD THREAD 1- 8125 8125 8125 8125 8125 8125 8125 8125 [email protected] 610 610 580 470 610 610 580 470 610 610 580 470 610 610 580 470 888-252-638 SeriesInsert 3.00 -5.50 0.50 -3.00 3.00 -5.50 0.50 -3.00 0.50 -3.00 0.50 -3.00 3.00 -5.50 0.50 -3.00 3.00 -5.50 0.50 -3.00 0.50 -3.00 0.50 -3.00 3.00 -5.50 0.50 -3.00 3.00 -5.50 0.50 -3.00 0.50 -3.00 0.50 -3.00 3.00 -5.50 0.50 -3.00 3.00 -5.50 0.50 -3.00 0.50 -3.00 0.50 -3.00 RANGE RANGE RANGE RANGE SERIES GRIP GRIP GRIP GRIP holesizes. 0 CALL OUT CALL OUT CALL OUT CALL OUT

GRIP GRIP GRIP GRIP 5.5 3.0 5.5 3.0 3.0 3.0 5.5 3.0 5.5 3,0 3.0 3.0 5.5 3.0 5.5 3.0 3.0 3.0 5.5 3.0 5.5 3.0 3.0 3.0

ww product w ™ +0.15 /0.00 +0.15 /0.00 +0.15 /0.00 +0.15 /0.00 . HOLE SIZE HOLE SIZE HOLE SIZE HOLE SIZE SpaenaurHome

11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0

A/F A/F A/F A/F 9.0 9.0 7.0 6.0 9.0 9.0 7.0 6.0 9.0 9.0 7.0 6.0 9.0 9.0 7.0 6.0

METRIC ±0.64* ±0.64* ±0.64* ±0.64* ±0.25 ±0.25 ±0.25 ±0.25 16.0* 16.0* 16.0* 16.0* 16.0* 16.0* 16.0* 16.0* 13.0 13.0 10.0 13.0 13.0 10.0 13.0 13.0 10.0 13.0 13.0 10.0

9.0 9.0 9.0 9.0 HD HD HD HD .co A/F D OPEN ENDTYPE ±0.08 ±0.08 ±0.08 ±0.08 1.5 1.5 1.5 1.5 1.0 1.0 1.5 1.5 1.5 1.5 1.0 1.0 1.5 1.5 1.5 1.5 1.0 1.0 1.5 1.5 1.5 1.5 1.0 1.0 HH HH HH HH m FullSpaenaur Catalog HH LIA T E D EL O H ±0.38 ±0.38 ±0.38 ±0.38 L 19.2 16.5 15.7 13.0 12.0 10.3 19.2 16.5 15.7 13.0 12.0 10.3 19.2 16.5 15.7 13.0 12.0 10.3 19.2 16.5 15.7 13.0 12.0 10.3 Metric 6H/21 Thread Specifications: L L L L THREADSIZES HD MAX. MAX. MAX. MAX. 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 9.0 9.0 7.0 6.0 9.0 9.0 7.0 6.0 9.0 9.0 7.0 6.0 9.0 9.0 7.0 6.0 D D D D MAX. MAX. MAX. MAX. 11.2 11.2 11.2 11.2 11.2 11.2 11.2 11.2 8.2 8.0 7.3 5.8 8.2 8.0 7.3 5.8 8.2 8.0 7.3 5.8 8.2 8.0 7.3 5.8 IL IL IL IL per ASME B1.13M ASME per IL QTY. QTY. QTY. QTY. PKG PKG PKG PKG 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 AVK see pagesC144-C146 ContactUs For airtoolselection ® isaregisteredtrademark of AVIBANK MFG., INC. RANGE GRIP Français Métrique Metric

CCATALOGATALOG 1144 C Inserts Inserts C139 Français 22 MAR 2018 MAR 22 m co . For air tool selection see pages C144-C146 Contact Us Contact

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 PKG PKG PKG PKG QTY. QTY. QTY. QTY.

A/H IL IL IL IL

5.8 7.3 8.0 8.2 5.8 7.3 8.0 8.2 5.8 7.3 8.0 8.2 5.8 7.3 8.0 8.2 11.0 11.1 13.9 11.0 11.1 13.9 11.0 11.1 13.9 11.0 11.1 13.9 MAX. MAX. MAX. MAX.

D D D D 6.0 7.0 9.0 9.0 6.0 7.0 9.0 9.0 6.0 7.0 9.0 9.0 6.0 7.0 9.0 9.0 11.0 11.0 13.0 11.0 11.0 13.0 11.0 11.0 13.0 11.0 11.0 13.0 . MAX. MAX. MAX. MAX. w L L L L ww 10.3 12.0 13.0 15.7 16.5 19.2 20.0 10.3 12.0 13.0 15.7 16.5 19.2 20.0 10.3 12.0 13.0 15.7 16.5 19.2 20.0 10.3 12.0 13.0 15.7 16.5 19.2 20.0

±0.38 ±0.38 ±0.38 ±0.38 GRIP

RANGE 0 Full Spaenaur Catalog Spaenaur Full HH HH HH HH 1.0 1.0 1.5 1.5 1.5 1.5 2.0 1.0 1.0 1.5 1.5 1.5 1.5 2.0 1.0 1.0 1.5 1.5 1.5 1.5 2.0 1.0 1.0 1.5 1.5 1.5 1.5 2.0 ±0.08 ±0.08 ±0.08 ±0.08 EPYT DNE NEPO NEPO DNE HOLE DETAIL EPYT per ASME B1.13M HD HD HD HD 9.0 9.0 9.0 9.0 10.0 13.0 13.0 10.0 13.0 13.0 10.0 13.0 13.0 10.0 13.0 13.0 16.0* 16.0* 19.0* 16.0* 16.0* 19.0* 16.0* 16.0* 19.0* 16.0* 16.0* 19.0* ±0.25 ±0.25 ±0.25 ±0.25 ±0.64* ±0.64* ±0.64* ±0.64* THREAD SIZES THREAD IL 1-888-252-638

: F 6.0 7.0 9.0 9.0 6.0 7.0 9.0 9.0 6.0 7.0 9.0 9.0 6.0 7.0 9.0 9.0 11.0 11.0 13.0 11.0 11.0 13.0 11.0 11.0 13.0 11.0 11.0 13.0 Metric 6H/21 A/H A/H A/H A/H

D Spaenaur Home Spaenaur HOLE SIZE HOLE SIZE HOLE SIZE HOLE SIZE 2 +0.15 / 0.00 +0.15 / 0.00 +0.15 / 0.00 +0.15 / 0.00 All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous 3.0 3.0 3.0 5.5 3.0 5.5 3.5 3.0 3.0 3.0 5.5 3.0 5.5 3.5 3.0 3.0 3.0 5.5 3.0 5.5 3.5 3.0 3.0 3.0 5.5 3.0 5.5 3.5 HD GRIP GRIP GRIP GRIP CALL OUT CALL OUT CALL OUT CALL OUT METRIC ™ L Thread Specifications: GRIP GRIP GRIP GRIP 1-800-265-877 RANGE RANGE RANGE RANGE

: 0.50 - 3.00 0.50 - 3.00 0.50 - 3.00 3.00 - 5.50 0.50 - 3.00 3.00 - 5.50 0.70 - 3.50 0.50 - 3.00 0.50 - 3.00 0.50 - 3.00 3.00 - 5.50 0.50 - 3.00 3.00 - 5.50 0.70 - 3.50 0.50 - 3.00 0.50 - 3.00 0.50 - 3.00 3.00 - 5.50 0.50 - 3.00 3.00 - 5.50 0.70 - 3.50 0.50 - 3.00 0.50 - 3.00 0.50 - 3.00 3.00 - 5.50 0.50 - 3.00 3.00 - 5.50 0.70 - 3.50 HH P Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation

470 580 610 610 470 580 610 610 470 580 610 610 470 580 610 610 8125 8125 1015 8125 8125 1015 8125 8125 1015 8125 8125 1015 [email protected] THREAD THREAD THREAD THREAD CALL OUT CALL OUT CALL OUT CALL OUT SERIES SIZE SIZE SIZE SIZE THREAD THREAD THREAD THREAD M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO M6 x 1.0 ISO M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO M6 x 1.0 ISO M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO M6 x 1.0 ISO M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO M6 x 1.0 ISO M8 x 1.25 ISO M8 x 1.25 ISO M10 x 1.5 ISO M8 x 1.25 ISO M8 x 1.25 ISO M10 x 1.5 ISO M8 x 1.25 ISO M8 x 1.25 ISO M10 x 1.5 ISO M8 x 1.25 ISO M8 x 1.25 ISO M10 x 1.5 ISO “true metric” Series Insert 1-800-265-8772 No. No. No. No. METRIC ELS3T-470-3.0 ELS3T-580-3.0 ELS3T-610-3.0 ELS3T-610-5.5 ELB3T-470-3.0 ELB3T-580-3.0 ELB3T-610-3.0 ELB3T-610-5.5 ELA3T-470-3.0 ELA3T-580-3.0 ELA3T-610-3.0 ELA3T-610-5.5 ELM3T-470-3.0 ELM3T-580-3.0 ELM3T-610-3.0 ELM3T-610-5.5 ELS3T-8125-3.0 ELS3T-8125-5.5 ELS3T-1015-3.5 ELB3T-8125-3.0 ELB3T-8125-5.5 ELB3T-1015-3.5 ELA3T-8125-3.0 ELA3T-8125-5.5 ELA3T-1015-3.5 ELM3T-8125-3.0 ELM3T-8125-5.5 ELM3T-1015-3.5 MANUFACTURER MANUFACTURER MANUFACTURER MANUFACTURER Metric INSERT PROFILE INSERT E-L Closed End Type and special head configurations available. Contact Spaenaur Sales Desk for details. E-L No. No. No. No. SPAENAUR SPAENAUR SPAENAUR SPAENAUR 216-K93-1T 216-K97-1X 216-K99-1P 216-K94-1K 216-K98-1A 216-K92-1N 216-M05-1T 216-M17-1T 216-M03-1C 216-M15-1C 216-M02-1Y 216-M14-1Y 216-M09-1X 216-M11-1X 216-M01-1P 216-M20-1P 216-M13-1P 216-M06-1K 216-M18-1K 216-K96-1M 216-M12-1A 216-K95-1W 216-M04-1N 216-M16-1N 216-M08-1M 216-M10-1M 216-M07-1W 216-M19-1W MONEL ZINC TRIVALENT BRASS ZINC TRIVALENT ALUMINUM ZINC TRIVALENT STEEL ZINC TRIVALENT NOTE 1: Grip range can be affected by parent material density and actual hole size. AVK suggests trial installations to determine optimum grip. NOTE 1: Grip range can be affected by parent material density and actual hole size. AVK suggests trial installations NOTE 2: NOTE 3: Not offered in any other Finishes. product line offers insert designs product line offers to accommodate The hole sizes. Closed end product and hole sizes. Closed configurations a variety of head Please contact are also available. for details. Spaenaur Sales Desk is a registered trademark ® AVIBANK MFG., INC. NEW Metric Métrique AVK of CCATALOGATALOG 1144 1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français

Rivet Nuts Inch and Metric Écrous-rivets Pouce et Métrique R-N SERIES™ RIVET NUT PROFILE The R-N Series Rivet Nut features a heavy duty head profile and increased wall thickness in the collapse area. This makes the R-N Series ideal for leg leveling applications. The R-N Series Rivet Nut can be installed using AVK’s pneumatic/ hydraulic SPP2 Tool™ or the specific rivet nut tools shown on page C152. The R-N Series Rivet Nut’s heavier wall thickness and resulting upset load requires this type of tool be used for installation. The R-N Series can be installed either prior to or after finish. C COLD FORMING TECHNOLOGY™ The R-N Series Rivet Nuts are HOW IT WORKS FOR YOU The internal thread of manufactured using the R-N Series Rivet state-of-the-art cold forming Nut is roll FORMED technology. This provides not machined. This very precise tolerances. All provides excellent surfaces of the R-N Series are thread strength. FORMED, not machined. This provides excellent quality.

DESIGN BENEFITS INCREASED PUSH-OUT LOADS are achievable in leg UNIFORM INSTALLATION is guaranteed because of the leveling applications when using the R-N Series due dimensional tolerances and concentricity tolerances built to its heavy duty head profile and thick wall into our product made possible by our cold forming construction. technology.

SUPERIOR THREAD STRENGTH is provided due to AVK’s AVAILABLE in steel and aluminum. For additional materi- internal rolled thread manufacturing process. als, contact Spaenaur Sales Desk for availability.

SUPERIOR CORROSION RESISTANCE is provided by NAS1329 and NAS1330 with “DFAR” material is available our “9T” finish (500 hours plus) see page C156. upon request.

ADDITIONAL DESIGN TYPES

CLOSED END KEYED HEAD 100° COUNTERSUNK HEAD 4

Thread area is enclosed An underside of the head A 100° countersunk head ALOG 1

eliminating leakage past “key” projection when placed profile when installed into a AT CATALOG 14 C CATALOG the threads from either into a matching “keyed” hole matching countersunk hole side of the application. design provides additional provides a flush installation. torque resistance.

Contact Spaenaur Sales Desk for details.

® © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. AVK is a registered trademark Subject to CatalogP: 1- Terms800 and- Conditions265-877 of Use 2available F: at1- Spaenaur.com888-252-638 and on page TC20 and ww TC3 wat the. back of this catalog. .com C140 © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. of AVIBANK MFG., INC. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue. 18 Jan 2018 C C141 Français

p. 21 FEB 21 2018 Rivet Nuts Rivet Écrous-rivets ri g um 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 m PKG PKG PKG PKG QTY. QTY. QTY. QTY. m Aluminum co ti * . For air tool selection see pages C144-C146 Contact Us Contact op IL IL IL IL

.380 .380 .230 .230 .315 .390 .450 .555 .595 .630 .650 5.61 5.61 7.08 7.08 7.08 REF. REF. REF. REF. e 11.83 13.20 13.20 13.20 16.45 16.45 16.45 10.09 10.09 10.09 10.58 10.58 10.58 11.83 11.83

rmin D D D D

.155 .155 .189 .250 .332 .413 .490 .625 .625 3.93 3.93 5.61 5.61 5.61 7.13 7.13 7.13 8.43 8.43 8.43 0.10 .004 .004 .004 10.48 10.48 10.48 12.44 12.44 12.44 15.46 15.46 15.46

ete +0.00 +.000 +.000 +.000 o d

L L L L ns .687 .332 .450 .450 .155 .230 .937 .413 .540 .450 .155 .230 .500 .221 .270 .345 .400 .500 .641 .687 .875 .938 8.75 9.50 . 1.031 1.141 11.00 12.00 13.00 14.50 16.00 17.50 15.50 17.00 18.50 18.00 20.00 22.00 20.00 22.50 25.00 24.00 26.50 29.00 ±0.38 ±.015 ±.015 ±.015 io w at ll HH HH HH HH ta ww .025 .025 .032 .038 .058 .062 .088 .085 .085 0.63 0.63 0.81 0.81 0.81 1.22 1.22 1.22 1.47 1.47 1.47 1.57 1.57 1.57 2.23 2.23 2.23 2.23 2.23 2.23 NOM. NOM. NOM. NOM.

0 Full Spaenaur Catalog Spaenaur Full HD HD HD HD trial i .406 .038 .531 .250 .270 .270 .325 .406 .475 .665 .781 .906 .906 6.68 6.68 9.01 9.01 9.01 .406 .038 .531 .250 11.17 11.17 11.17 13.43 13.43 13.43 16.65 16.65 16.65 19.50 19.50 19.50 22.79 22.79 22.79 ±0.38 ±.015 ±.015 ±.015 ts s THREAD SIZES THREAD gge (.490) (.490) (.155) (.155) (.189) (.250) (.332) (.413) (.490) (.625) (.625) su 3.94 3.94 5.60 5.60 5.60 7.20 7.20 7.20 8.50 8.50 8.50 10.50 10.50 10.50 12.50 12.50 12.50 15.50 15.50 15.50 VK Z (.413) Z (.413) Z Q (.332) Q (.332) Q Q (.332) #2 HOLE SIZE HOLE SIZE HOLE SIZE HOLE SIZE 1/4 (.250) 5/8 5/8 1/4 1/4 (.250) #12 (.189) #12 A 5/32 (.155) 5/32 (.155) 5/32 (.155) 5/32 5/32 +0.08 / 0.00 +.003 / .000 +.003 / .000 +.003 / .000 1-888-252-638 12.5 mm 12.5 mm 12.5 mm

ze. : i GRIP F RANGE

METRIC Spaenaur Home Spaenaur 2 I.D. I.D. I.D. I.D. ole s

5 RAD MARK MARK MARK MARK 2-RAD 1-RAD 2-RAD 3-RAD 3-RAD 4-RAD 1-RAD 2-RAD 1-RAD 2-RAD 1-RAD 2-RAD 1-RAD 2-RAD 1-RAD 2-RAD 1-RAD 2-RAD 1-RAD 2-RAD 1-RAD 2-RAD 1-RAD 1-RAD 1-RAD 2-RAD 5-RAD 3-RAD 3-RAD 5-RAD 1-RAD 1-RAD BLANK BLANK BLANK BLANK BLANK BLANK BLANK BLANK BLANK BLANK al h rder. Contact Spaenaur Sales Desk for details. l o All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous actu

60 1.8 2.5 2.0 3.0 4.0 2.0 3.5 5.0 2.0 3.5 5.0 3.0 5.0 7.0 3.0 5.5 8.0 3.0 5.5 8.0 160 .270 .025 350 .665 .062 160 .270 .025 321 .357 .032 110 120 330 200 200 200 250 350 GRIP GRIP GRIP GRIP nd CALL OUT CALL OUT CALL OUT CALL OUT a . IL ity tion ns a 1-800-265-877 ll GRIP GRIP GRIP GRIP

RANGE RANGE RANGE RANGE a de : e. Contact Spaenaur Sales Desk for details. .010 - .060 .085 - .110 .075 - .120 .280 - .330 .140 - .200 .125 - .200 .115 - .200 .150 - .250 .250 - .350 1.00 - 1.75 1.75 - 2.50 0.25 - 2.00 2.00 - 3.00 3.00 - 4.00 0.25 - 2.00 2.00 - 3.50 3.50 - 5.00 0.75 - 2.00 2.00 - 3.50 3.50 - 5.00 1.00 - 3.00 3.00 - 5.00 5.00 - 7.00 1.00 - 3.00 3.00 - 5.50 5.50 - 8.00 1.00 - 3.00 3.00 - 5.50 5.50 - 8.00 P ilable by specia Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation ial bl inst er la ava D OPEN END TYPE OPEN END re HD avai after mat [email protected] 350 350 470 470 470 580 580 580 610 610 610 428 518 616 820 820 440 440 632 8125 8125 8125 1015 1015 1015 1024 s a 12175 12175 12175 e e THREAD THREAD THREAD THREAD nt CALL OUT CALL OUT CALL OUT CALL OUT le e ar abl s ar sty 6H/21 per ASME B1.13M L p ge ad d y e a au HH SIZE SIZE SIZE SIZE thr g ed b THREAD THREAD THREAD THREAD 4-40 UNC 440 .135 - .160 6-32 UNC 632 .240 - .280 280 .325 .032 .500 .189 .270 4-40 UNC 440 .010 - .060 60 .270 .025 .345 .155 .230 4-40 UNC 4-40 UNC 6-32 UNC 4-40 UNC 440 .135 - .160 8-32 UNC 832 .281 - .321 t 10-24 UNC 1024 .010 - .080 80 10-24 UNC 10-24 UNC 1024 .010 - .080 80 1/4-28 UNF 428 .260 - .320 320 .475 .058 1/2-13 UNF 1/2-20 UNF 1/4-28 UNF 3/8-24 UNF 624 .370 - .455 455 .781 .088 1.218 .490 .630 1/4-20 UNC 420 .080 - .140 140 .475 .058 .687 .332 .450 3/8-16 UNC 616 .200 - .285 285 .781 .088 1.031 .490 .605 3/8-16 UNC 1/4-20 UNC 420 .140 .080 - 140 .475 .058 .687 .332 .450 M3 x 0.5 ISO M3 x 0.5 ISO M4 x 0.7 ISO M4 x 0.7 ISO M4 x 0.7 ISO M5 x 0.8 ISO M5 x 0.8 ISO M5 x 0.8 ISO M6 x 1.0 ISO M6 x 1.0 ISO M6 x 1.0 ISO 5/16-24 UNF 524- .350 .275 5/16-24 UNF 524 .425 - .500 500 .665 .062 .937 .413 .540 5/16-18 UNC M8 x 1.25 ISO M8 x 1.25 ISO M8 x 1.25 ISO M10 x 1.5 ISO M10 x 1.5 ISO M10 x 1.5 ISO not M12 x 1.75 ISO M12 x 1.75 ISO M12 x 1.75 ISO Metric and he e UNC ffec s r a a ze and si ds RADIAL GRIP I.D. MARK 1-800-265-8772 n be ip ea r ca No. No. No. No. hr M l g l UNF t a a s RNS440-60 RNS420-140 RNS832-321 RNS440-160 RNS1024-80 RNA624-285 RNS3T440-60 RNS3T428-320 RNS3T632-280 RNS3T440-160 RNS3T624-455 RNS3T440-110 RNS3T632-120 RNS3T428-200 RNS3T524-200 RNS3T624-115 RNS3T820-250 RNS3T820-350 RNS3T524-350 RNS3T524-500 RNS3T1024-80 RNS3T420-140 RNS3T-350-2.5 RNS3T-470-3.0 RNS3T-470-4.0 RNS3T-580-2.0 RNS3T-580-3.5 RNS3T-580-5.0 RNS3T-610-2.0 RNS3T-610-3.5 RNS3T-610-5.0 RNS3T-470 -2.0 RNS3T1024-330 RNS3T-8125-3.0 RNS3T-8125-5.0 RNS3T-8125-7.0 RNS3T-1015-3.0 RNS3T-1015-5.5 RNS3T-1015-8.0 RNS3T-350-1.75 MANUFACTURER MANUFACTURER MANUFACTURER MANUFACTURER RNS3T-12175-3.0 RNS3T-12175-5.5 RNS3T-12175-8.0 dition dition ip range r d d THREAD MFG. I.D. MARK Thread Specifications: Unified MIL-S-7742/ASME-B1.1 No. No. No. No. Metric Métrique E 4: A E 3: RN Serie E 2: A E 1: G T T T T 196-030 197-092 196-061 196-121 196-034 196-048 SPAENAUR SPAENAUR SPAENAUR SPAENAUR * 196-F17-1T 196-F55-1T 196-F15-1C 196-F53-1C 196-F14-1Y 196-F38-1Y 196-F26-1Y 196-F23-1X 196-F09-1X 196-F11-1X 196-F40-1Y 196-F25-1P 196-F13-1P 196-F51-1P 196-F44-1K 196-F18-1K 196-F20-1K 196-F56-1K 196-F06-1K 196-F32-1K 196-F24-1A 196-F12-1A 196-F48-1A 196-F50-1A 196-F36-1A 196-F16-1N 196-F30-1N 196-F42-1N 196-F28-1N 196-F22-1M 196-F08-1M 196-F10-1M 196-F34-1M 196-F46-1M 196-F19-1W 196-F21-1W 196-F07-1W "M" INDICATES METRIC NO NO NO NOTE 5: Additional materials are available – Aluminum 6053/5056, Alloy Steel 4037 & CRES 430. NOTE 6: Additional finishes are available – Yellow Zinc Trivalent & Tin Zinc Trivalent. details. NOTE 7: Also available in Closed End Type – available by special order. Contact Spaenaur Sales Desk for NO STEEL ZINC TRIVALENT STEEL CADMIUM PLATED FLATHEAD UNIFIED (INCH) AND (INCH) UNIFIED FLATHEAD ALUMINUM is a registered trademark ® AVIBANK MFG., INC. Pouce et Inch and Inch and AVK of CCATALOGATALOG 1144 C 182018Jan C142 Pneumatic Tools Outils pneumatiques SPECIAL DESIGNS particular applicationneeds. kit noseassemblytofityour AVK candesignathreadadaption ADDITIONAL DESIGNTYPES the mandrelspinsoutofinstalledpart. The operatorthenpressesthelowerreversetriggerand AVK’s productsinvariablethicknessmaterials. in thickness.Thetoolneedsnoadjustmenttoinstall stall torque.Thisoccurseveniftheparentmaterialvaries The toolthenstallswhenitreachesitspredetermined material. the knurlingtobiteintobacksideedgeofparent The toolcontinuestotorquetheinsert’sthreadscausing flange againstthebacksideofparentmaterial. wall providingholefillandthenformsasecondary As thisoccurs,theAVKinsertexpandswithinhole the threadedareaofinsert“walks”upmandrel. knurling atthenosepiecepreventingitfromspinningas The headofthethreadedinsertisgrippedby into theinsert. The toptriggerisdepressedandthetoolmandrelspins mandrel andplacesitintotheholeinparentmaterial. The operatorquarterturnsanAVKthreadedinsertontothetool HOW THEAVKTOOLWORKS L’utilisation est soumise aux Conditions d’utilisation disponibles duCatalogue sur Spaenaur.com etàla page et TC4 àla inTC5 de ce catalogue. Inc. © 2018Spaenaur Subject toCatalog Terms andConditions available ofUse atSpaenaur.com and onpage and TC2 atthebackTC3 ofthis catalog. Inc. © 2018Spaenaur P :

1- AVK PNEUMATICTOOLSPROFILE AVK hasselectedthe highest RPMforthethreadsizeselectedresultinginoptimuminstallationspeed. allows foreasyaccesstothethreadsizecomponentparts.AVK’sPneumatictoolsprovide The AVKpneumatictoolfeaturesaQuick-Changethreadadaptionkit.Thispatented*feature dependability. Therockerstyleforwardandreversetriggeriseasycomfortabletouse. 800 THR Tousécrite Inc. deSpaenaur l’autorisationne peut êtrereproduit, entoutoupartie, sans droitsLe catalogue réservés. 1-800-265-8772 Inc.of Spaenaur permissionthe written part, without orinwhole in be reproduced, not may Catalog reserved. All rights - 265-877 EAD ADA 2 PTIO

F :

N KIT N 1- HEAD FORMINGTHREADADAPTIONKIT RIGHT ANGLEDESIGN [email protected] to increasetorquecapability. the AVKinsert’sheadtoradius of atube A HeadFormingT.A.K.isavailableto contour access applications. Tool isdesignedforlimited The RightAngleInlineStyle 888-252-638 ARO BrandPneumaticTool 0

ww w . SpaenaurHome *P

able totheoperatorandweighsinat3lbs. The ergonomicdesignoftheAVKAROtoolmakesitfeelcomfort- no adjustmenttoinstalltheproductinvariablethicknessmaterial. The AVKAROtoolusestorquetoinstalltheproduct.Itneeds thread adaptionkitprovidesyouwithreliability. The ruggeddesignofthetoolcasing,itscomponentsandAVK quick-change threadadaptionkit.Notoolsarerequired. Preventative maintenanceisquickandeasywithAVK’spatented* installation. The knurlednoseassemblyeliminatesanytorque“kick”during The rockerstyletriggeriseasytouse&minimizesoperatorfatigue. at en

t No.4,121,44 foritsergonomicdesignandoutstanding

.co DESIGN BENEFITS 4 m FullSpaenaur Catalog INLINE DESIGN vertical installations. is designedfor The InlineStyleTool ( AVK 1.36 kg ContactUs ® isaregisteredtrademark of ) . AVIBANK MFG., INC. Français Pouce Inch

CATALOGCATALOG 1144 C C143 Français 18 Jan 2018 18 m co . 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PKG QTY. Contact Us Contact

1 1 1 1 1 PKG QTY.

T77NPT4 T77NPT6 T77NPT8 T77NPT10 T77NPT10 NOSE CONE T77NPTM5 T77NPTM6 T77NPTM8 T77NPTM3 T77NPTM4 T77NPT250 T77NPT375 T77NPT500 T77NPTM12 CONE ONLY T77NPT1015 T77NPT3125 1.3 1.3 1.3 1.3 1.3 SPAENAUR No. SPAENAUR

. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PKG QTY. w F MAX 0.35 0.64 0.50 0.40 0.40 DIAMETER ww

0 Full Spaenaur Catalog Spaenaur Full T32PT10 T30NPT4 T30NPT6 T30NPT8 T30NPT10 T30NPT10 SET ONLY T30NPTM5 T30NPTM6 T30NPTM8 T30NPTM3 T30NPTM4 E T30NPT250 T30NPT375 T30NPT500 T30NPTM12 BEARING SET T30NPT3125 1.00 1.00 1.00 1.00 1.00 Installation Tools / Data / Spare Parts / Spare / Data Tools Installation DIAMETER 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PKG QTY. D Outils d'installation / Données / Pièces de rechange / Données Outils d'installation 1.57 1.57 1.57 1.57 1.57 DIAMETER G 1-888-252-638

: F MANDREL

TA518-175 TA616-175 TA813-200 TA440-075 TA632-087 TA832-087 TA420-125 TA1024-150 TA1032-150 TM5-45 mm TM6-30 mm TM8-45 mm TM3-20 mm TM4-40 mm Spaenaur Home Spaenaur TM10-45 mm TM12-50 mm 7.75 9.00 9.00 7.75 7.75 2 MANDREL ONLY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PKG QTY. 4.75 6.00 6.00 4.75 4.75 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PKG QTY. All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous 1.86 1.86 1.86 1.86 1.86 PSI 36-40 70-80 60-85 60-85 60-85 70-95 80-100 90-110 95-110 4.8-6.5 5.5-6.8 6.2-7.5 6.2-7.5 2.4-2.7 4.1-5.5 4.1-5.5 SETTING T29NPT6 T29NPT7 T29NPT8 T29NPT9 T29NPT1 T29NPT2 T29NPT3 T29NPT4 T29NPT4 T29NPT5 1-800-265-877 HEX DRIVE T29NPT10 T29NPT11 T29NPT12 T29NPT25 T29NPT27 T29NPT26 3.25 3.18 3.18 2.58 2.58 (lbs) A B C

: DRIVE ONLY WEIGHT P Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation SIZE 4-40 6-32 8-32 10-24 10-32 1/4"-20 3/8"-16 1/2"-13 THREAD 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5/16"-18 PKG QTY. M6 x 1.0 ISO M3 x 0.5 ISO M4 x 0.7 ISO M5 x 0.8 ISO 350 600 900 RPM M8 x 1.25 ISO M10 x 1.5 ISO 1500 3000 M12 x 1.75 ISO [email protected] No. No. THREAD KIT ONLY TNPT813CTA AA912-3P AA912-6P AA912-9P TNPT580TAK TNPT610TAK TNPT518TAK TNPT616TAK TNPT350TAK TNPT470TAK TNPT440TAK TNPT632TAK TNPT832TAK TNPT 420TAK TNPT8125TAK TNPT1015TAK TNPT1024TAK TNPT1032TAK AA912-9P AA912-6P AA912-6P AA912-3P AA912-9P AA912-6P AA912-6P AA912-3P ADAPTION KIT SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. TNPT12175CTA AA912-1500P AA912-3000P AA912-3000P AA912-3000P AA912-3000P AA912-1500P AA912-1500P AA912-3000P AA912-3000P AA912-1500P MANUFACTURER MANUFACTURER SIZE 4-40 6-32 8-32 10-24 10-32 1-800-265-8772 3/8"-16 1/4"-20 1/2"x13 THREAD No. No. 5/16"-18 M5 x 0.8 ISO M6 x 1.0 ISO M3 x 0.5 ISO M4 x 0.7 ISO M8 x 1.25 ISO M10 x 1.5 ISO M12 x 1.75 ISO SPAENAUR SPAENAUR TAA912-6P TAA912-9P TAA912-9P TAA912-9P TAA912-6P TAA912-6P TAA912-6P TAA912-6P 880-A03-1X TAA912-15P TAA912-30P 888-A03-1X 880-A03-1X TAA912-30P TAA912-30P TAA912-30P TAA912-15P TAA912-15P TAA912-30P TAA912-30P TAA912-15P POWER TOOL SPARE PARTS POWER TOOL INSTALLATION DATA POWER TOOL INSTALLATION POWER INSTALLATION TOOLS FOR INSTALLATION POWER E-L SERIES INSERTS A-T, A-W, E-H, Metric Métrique is a registered trademark ® AVIBANK MFG., INC. Pouce et Inch and Inch and AVK of CCATALOGATALOG 1144 C 182018Jan Outils d'installation/DonnéesPiècesderechange C144 Installation Tools/DataSpareParts and monelproduct. settings foraluminum,brass for toolRPMandairpressure a SpaenaurSalesRepresentative popular steelproduct.Contact requirements forourmost running) airpressure spare partsanddynamic(tool This chartdesignatesthetool, TAA912-15P TAA912-30P DIMENSIONAL DATA/TOOLSET-UPREQUIREMENTS AVK PNEUMATICTOOLSPECIFICATIONS- Spaenaur 880-A03-1X TAA912-6P TAA912-9P No. A L’utilisation est soumise aux Conditions d’utilisation disponibles duCatalogue sur Spaenaur.com etàla page et TC4 àla inTC5 de ce catalogue. Inc. © 2018Spaenaur Subject toCatalog Terms andConditions available ofUse atSpaenaur.com and onpage and TC2 atthebackTC3 ofthis catalog. Inc. © 2018Spaenaur 1,500 3,000 P C B A RPM 350 600 900 P :

1- LBS WEIGHT 800 Tousécrite Inc. deSpaenaur l’autorisationne peut êtrereproduit, entoutoupartie, sans droitsLe catalogue réservés. 1-800-265-8772 Inc.of Spaenaur permissionthe written part, without orinwhole in be reproduced, not may Catalog reserved. All rights (1.46) (1.44) (1.44) (1.17) (1.15) 3.25 3.18 3.18 2.58 2.55 . (Kg) - 265-877 (47.24) (47.24) (47.24) (47.24) (47.24) AIR TOOLSELECTION/SPAREPARTS 1.86 1.86 1.86 1.86 1.86 M10 x1.50 M8 x1.25 M6 x1.0 M5 x0.8 M4 x0.7 THREAD 5/16-18 5/16-24 3/8-16 1/4-20 3/8-24 1/4-28 10-32 10-24 8-32 6-32 SIZE 2

(136.3) (152.4) (152.4) (120.6) (120.6) F 5.37 6.00 6.00 4.75 4.75 :

1- [email protected] TAKPT1015TAK TAKPT8125TAK TAKPT1032TAK TAKPT1024TAK C 888-252-638 TAKPT610TAK TAKPT580TAK TAKPT470TAK TAKPT616TAK TAKPT518TAK TAKPT420TAK TAKPT832TAK TAKPT632TAK TAKPT624TAK TAKPT524TAK TAKPT428TAK ADAPTION THREAD (212.5) (228.6) (228.6) (196.8) (196.8) 8.37 9.00 9.00 7.75 7.75 KIT B (38.10) (39.87) (39.87) (39.87) (39.87) DIA. 1.50 1.57 1.57 1.57 1.57 T29NPT25 T29NPT12 T29NPT11 T29NPT10 T29NPT24 T29NPT23 T29NPT22 D T29NPT7 T29NPT6 T29NPT5 T29NPT4 T29NPT4 T29NPT7 T29NPT6 T29NPT5 DRIVE HEX D DIA. G 0 A

E DIA.

ww (36.06) (25.40) (25.40) (25.40) (25.40) DIA. F DIA. 1.00 1.42 1.00 1.00 1.00 TM10-50 mm TM8-50 mm TM6-40 mm TM5-40 mm TM4-40 mm TA1032-175 TA1024-175 10 PERBAG E TA616-200 TA518-200 TA420-150 TA832-150 TA632-150 TA624-200 TA524-200 TA428-150 MANDREL w . B SpaenaurHome D C B A

DIA. MAX. (22.86) (16.25) (10.16) (10.16)

(12.7)

.400 .900 .640 .500 .400 from thechartbelow. select theappropriateRPMtool required foryourapplication, type ofinsertandthreadsize Once youhaveselectedthe and A-OSeriesInserts. to installtheA-L,A-K,A-H,A-P has beenspecificallydesigned The toolshownonthispage BEARING F T32PT10 T32PT7 T32PT6 T32PT4 T32PT3 T32PT8 T32PT7 T32PT5 T32PT4 T32PT4 T32PT2 T32PT1 T32PT8 T32PT7 T32PT5 SET C

.co (33.0) (33.0) (33.0) (33.0) (NA) T77AKPT3125 T77AKPT1015 T77AKPT8125 T77AKPT3125 T77AKPT375 T77AKPT250 T77AKPT610 T77AKPT580 T77AKPT470 T77AKPT375 T77AKPT250 NA 1.3 1.3 1.3 1.3 T77AKPT10 T77AKPT10 G T77AKPT8 T77AKPT6 CONE NOSE m D FullSpaenaur Catalog THREADAD PROPER AIRSUPPLY SET-UP REQUIRES: part numberdesignatesthisfeature to properinsert incorporates aspecialpilot/serratedtipthatisessential SPECIAL FEATURE—TheAKPTnoseconedesign 90-110 PSI( 5/16 or Air pressuregaugeandregulator Inline oiler/separator running) airpressureat25S.C.F.M. Spaenaur No.122262N PREVENTATIVE MAINTENANCEREQUIREMENTS: AVAILABLE. NOTE: UNFFINETHREADCOMPONENTSARE APT cap screw. replace themandrelwithanewsockethead touches thepilot.Ifanydragisstillfelt, insert ontothemandrelbackwardsuntil it the conditionofmandrel,threadanAVK thread wearordamageandreplaced.Totest The toolmandrelshouldbeinspectedfor BRAND 930AA. temperature greasesuchasLUBRIPLATE® operation. AVKsuggeststheuseofhigh lubricated conditiontoassurepropertool The bearingsetmustbekeptinaWET ION KIT ION 7.92 mm 7.92 mm 6.2-7.5 BARS AVK minimumhoseID ContactUs ® isaregisteredtrademark of ) dynamic(tool Pouce et AVIBANK MFG., INC. Inch and Français Métrique Metric

CCATALOGATALOG 1144 C G 1.3 1.3 1.3 NA (NA) (33.0) (33.0) (33.0) C145 Français 18 Jan 2018 18 BARS F .600 .625 .900 .350 70 - 80 60 - 85 60 - 85 60 - 85 70 - 95 SETTINGS (8.89) PRESSURE PSI 80 - 100 90 - 110 95 - 110 2.4 - 2.7 4.1 - 5.5 4.1 - 5.5 4.8 - 6.5 5.5 - 6.8 6.2 - 7.5 6.2 - 7.5 (15.24) (15.87) (22.86) m DYNAMIC AIR DIA. MAX. co . Contact Us Contact

E NOSE CONE 1.00 1.00 1.43 1.00 T77NPT6 T77NPT8 DIA. T77NPT10 T77NPT10 T77NPTM3 T77NPTM4 T77NPTM5 T77NPTM6 T77NPTM8 T77NPT250 T77NPT375 T77NPT500 (25.40) (25.40) (25.40) (36.32) T77NPTM12 T77NPT3125 T77NPT1015

C SET D ION ION KIT . 1.57 1.57 1.50 1.57 DIA. T32PT10 T30NPT6 T30NPT8 BEARING T30NPT10 T30NPT10 (39.87) (39.87) (39.87) (38.10) T30NPTM3 T30NPTM4 T30NPTM5 T30NPTM6 T30NPTM8 T30NPT250 T30NPT375 T30NPT500 T30NPT500 w T30NPT3125 APT ww

7.75 9.00 8.37 7.75 0 B (196.8) (196.8) (228.6) (212.5) Full Spaenaur Catalog Spaenaur Full MANDREL TA632-087 TA832-087 TA420-125 TA518-175 TA616-175 TA813-200 10 PER BAG TA1024-150 TA1032-150 TM3-20 mm TM4-20 mm TM5-25 mm TM6-30 mm TM8-40 mm THREAD AD THREAD TM10-45 mm TM12-50 mm Installation Tools / Data / Spare Parts / Spare / Data Tools Installation 4.75 6.00 6.00 4.75 (120.6) (120.6) (152.4) (152.4) A HEX DRIVE T29NPT2 T29NPT3 T29NPT4 T29NPT4 T29NPT5 T29NPT6 T29NPT7 T29NPT8 T29NPT9 T29NPT26 T29NPT10 T29NPT11 T29NPT12 T29NPT25 T29NPT27 Outils d'installation / Données / Pièces de rechange / Données Outils d'installation 1-888-252-638 1.86 1.86 1.86 1.86 The tool shown on this page has on this page The tool shown designed to been specifically E-L and E-H install the A-T, A-W, Series Inserts. the type Once you have selected size of insert and thread required for your application, RPM tool select the appropriate from the chart below.

: (47.24) (47.24) (47.24) (47.24) F ABCD

KIT Spaenaur Home Spaenaur 2 THREAD ADAPTION TNPT813CTA TNPT632TAK TNPT832TAK TNPT420TAK TNPT518TAK TNPT616TAK TNPT350TAK TNPT470TAK TNPT580TAK TNPT610TAK TNPT1024TAK TNPT1032TAK TNPT8125TAK TNPT1015TAK TNPT12175CTA (Kg) . 2.58 3.18 3.25 2.55 (1.15) (1.17) (1.44) (1.46) F DIA. All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous WEIGHT LBS E DIA. SPECIAL FEATURE—The NPT nose cone design incorporates a special serrated tip that is essential SPECIAL FEATURE—The NPT nose cone design incorporates to proper insert installation. T G D DIA. NUMBER COMPLETE TOOL PART TNPT6P518 TNPT6P616 TNPT3P813 TNPT30P632 TNPT30P832 TNPT15P420 TNPT30P350 TNPT30P470 TNPT15P580 TNPT15P610 TNPT6P8125 TNPT6P1015 TNPT15P1024 TNPT15P1032 TNPT3P12175 600 350 RPM A B C 3,000 1,500 1-800-265-877

: B 600 600 350 600 600 350 P Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation 3000 3000 1500 1500 1500 3000 3000 1500 1500 TOOL R.P.M [email protected] C SIZE THREAD 6-32 UNC 8-32 UNC 10-32 UNF 10-24 UNC 3/8-16 UNC 1/2-13 UNC 1/4-20 UNC M3 x 0.5 ISO M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO 5/16-18 UNC M8 x 1.25 ISO M10 x 1.50 ISO M12 x 1.75 ISO dynamic AIR TOOL SELECTION / SPARE PARTS AIR TOOL SELECTION minimum hose ID 1-800-265-8772 (6.2-7.5 BARS) 7.92 mm 7.92 mm A Metric Métrique 90-110 PSI (tool running) air pressure at 25 S.C.F.M. Inline oiler/separator Air pressure gauge and regulator 5/16 or The bearing set must be kept in a WET lubricated condition to assure proper tool operation. AVK suggests the use of high temperature grease such as The bearing set must be kept in a WET lubricated condition to assure proper tool operation. AVK suggests the LUBRIPLATE® BRAND 930 AA. mandrel, thread an AVK insert onto the The tool mandrel should be inspected for thread wear or damage and replaced. To test the condition of the new socket head cap screw. mandrel backwards until it touches the knurled nose cone. If any drag is still felt, replace the mandrel with a PROPER AIR SUPPLY SET-UP REQUIRES: SET-UP PROPER AIR SUPPLY AVK PNEUMATIC TOOL SPECIFICATIONS AVK PNEUMATIC NOTE: UNF FINE THREAD COMPONENTS ARE AVAILABLE. PREVENTATIVE MAINTENANCE REQUIREMENTS: DIMENSIONAL DATA / TOOL SET-UP REQUIREMENTS DIMENSIONAL DATA is a registered trademark ® This chart designates the tool, spare parts and dynamic (tool running) air pressure requirements for our most popular steel product. Contact a Spaenaur Sales Representative for tool RPM and air pressure settings for aluminum, brass and stainless product. AVIBANK MFG., INC. Pouce et Inch and Inch and AVK of CCATALOGATALOG 1144 C 182018Jan Outils d'installation/DonnéesPiècesderechange C146 Installation Tools/DataSpareParts AT *Note: A 5.7 Bars utilize astandardsocketheadcapscrew. Specified Mandrels,orwithadapter, Dual mandrelsystems-usetheAVK to Pressure)&Stroke(Setstrokelength). Dual Installationsystem-Traction(Pull Will set ment. way ofour And ofcourse,rapidinsertinstallationby Single triggerinstallationsequence. depressing theinsertontomandrel. Automatic insertmandrelfeedby body reinforcedwithsteelframe. Durable impactresistancecomposite balanced at Ergonomic, lightweightandwell inserts*. AV your productassembly. this toolwillofferanewstandardinfastandeasyinsertinstallationfor AVK’s insertauto-feedthreadingsystem,andsingletriggerinstallation, you toselectyourPlacementMethod,StrokeorPressure.Combinedwith OST™ issalightweight4.4poundergonomicinstallationtoolallowing pull topressureinserttooldesignedmeetanyinstallationcriteria. to introducetheAVKOne-Set™Tool(OST™)insertinstallationsystem.AVK’sOST™isamulti-strokeand Time ismoney;andtoreduceyourinstallationcostwitharapidsureshottool,AVKpleased FEATURES V K’s 122262N Ser K M3-M12 L’utilisation est soumise aux Conditions d’utilisation disponibles duCatalogue sur Spaenaur.com etàla page et TC4 àla inTC5 de ce catalogue. Inc. © 2018Spaenaur Subject toCatalog Terms andConditions available ofUse atSpaenaur.com and onpage and TC2 atthebackTC3 ofthis catalog. Inc. © 2018Spaenaur

On ie or 82PSIairpressurerequire- s 10 mm e-Set™ in OST™ 2.2kg the1/2-13a P and6-32to1/2-13 : To or4.4pounds. /.390 stroke.

1- ol w 800 Tousécrite Inc. deSpaenaur l’autorisationne peut êtrereproduit, entoutoupartie, sans droitsLe catalogue réservés. 1-800-265-8772 Inc.of Spaenaur permissionthe written part, without orinwhole in be reproduced, not may Catalog reserved. All rights il nd l n

ot - M12 x1.75 265-877 PNE set t h e R N or si UMATIC RAPIDIN z 2 es

. F :

1- M12 x1.75ISO M10 x1.50ISO [email protected] M8 x1.25ISO M8 x1.25ISO 5/16-24 UNC 5/16-18 UNC 5/16-24 UNC 5/16-18 UNC M6 x1.0ISO M5 x0.8ISO M4 x0.7ISO M6 x1.0ISO M5 x0.8ISO M4 x0.7ISO 1/2-13 UNC 3/8-16 UNC 1/4-20 UNC 1/4-20 UNC 1/4-28 UNF 1/4-28 UNF 3/8-24 UNF 10-24 UNC 10-24 UNC 10-32 UNF 10-32 UNF 8-32 UNC 6-32 UNC 8-32 UNC 6-32 UNC 888-252-638 THREAD THREAD SIZE SIZE NON STOCKAVAILABLEUPONREQUEST AIR TOOLSELECTION/SPAREPARTS 5500-AL8125SHTAK 5500-AL1032SHTAK 5500-AL1024SHTAK 5500-AL610SHTAK 5500-AL580SHTAK 5500-AL470SHTAK 5500-AL524SHTAK 5500-AL518SHTAK 5500-AL428SHTAK 5500-AL420SHTAK 5500-AL832SHTAK 5500-AL632SHTAK 5500-AL12175TAK 5500-AL1015TAK 5500-AL8125TAK 5500-AL1032TAK 5500-AL1024TAK CONVERSION KIT CONVERSION KIT 5500-AL610TAK 5500-AL580TAK 5500-AL470TAK 5500-AL813TAK 5500-AL624TAK 5500-AL616TAK 5500-AL524TAK 5500-AL518TAK 5500-AL428TAK 5500-AL420TAK 5500-AL832TAK 5500-AL632TAK AL, AK,AH,AO AL, AK,AH,AO STANDARD STANDARD 0

ww w . SpaenaurHome 5500-RN8125SHTAK 5500-RN1032SHTAK 5500-RN1024SHTAK

5500-RN610SHTAK 5500-RN580SHTAK 5500-RN470SHTAK 5500-RN524SHTAK 5500-RN518SHTAK 5500-RN428SHTAK 5500-RN420SHTAK 5500-RN832SHTAK 5500-RN632SHTAK 5500-RN1015TAK 5500-RN8125TAK 5500-RN1032TAK 5500-RN1024TAK

See NoteBelow* See NoteBelow* 5500-RN610TAK 5500-RN580TAK 5500-RN470TAK 5500-RN624TAK 5500-RN616TAK 5500-RN524TAK 5500-RN518TAK 5500-RN428TAK 5500-RN420TAK 5500-RN832TAK 5500-RN632TAK CONVERSION KITUSINGASOCKETHEADCAPSCREW CONVERSION CONVERSION SE AT*, RN*

AT, RN

KIT KIT AVK5500 THREADCONVERSIONKITS RT TO

.co THREAD DRIVE HEX S82-MandrelLength 3SH8125- MandrelLength 3SH1032- MandrelLength 3SH1024- S60 MandrelLength 3SH610- MandrelLength 3SH580- MandrelLength 3SH470- MandrelLength 3SH524- MandrelLength 3SH518- MandrelLength 3SH428- MandrelLength 3SH420- MandrelLength 3SH832- MandrelLength 3SH632- m 18AVK5500-AL12175 18AVK5500-AL1015 18AVK5500-AL8125 18AVK5500-AL1032 18AVK5500-AL1024 18AVK5500-AL610 18AVK5500-AL580 18AVK5500-AL470 18AVK5500-AL813 18AVK5500-AL624 18AVK5500-AL616 18AVK5500-AL524 18AVK5500-AL518 18AVK5500-AL428 18AVK5500-AL420 18AVK5500-AL832 18AVK5500-AL632

CONVERSION FullSpaenaur Catalog O HEAD SCREW STA STANDARD MANDREL SOCKET L - NDA FACTORY MANDREL SOCKET HEAD STANDARD CAP SCREW R

D T Spaenaur No.122262N

KIT HR

EAD USING 77AVK5500-AL8125SH 77AVK5500-AL1032SH 77AVK5500-AL1024SH 77AVK5500-AL610SH 77AVK5500-AL580SH 77AVK5500-AL470SH 77AVK5500-AL524SH 77AVK5500-AL518SH 77AVK5500-AL428SH 77AVK5500-AL420SH 77AVK5500-AL832SH 77AVK5500-AL632SH 77AVK5500-AL12175 77AVK5500-AL1015 77AVK5500-AL8125 77AVK5500-AL1032 77AVK5500-AL1024 77AVK5500-AL610 77AVK5500-AL580 77AVK5500-AL470 77AVK5500-AL813 77AVK5500-AL624 77AVK5500-AL616 77AVK5500-AL524 77AVK5500-AL518 77AVK5500-AL428 77AVK5500-AL420 77AVK5500-AL832 77AVK5500-AL632

AL, AK,AH,AO AL, AK,AH,AO CON NOSE PIECE NOSE PIECE A

NOSE PIECE CAP SCREW SOC VE HOLDER AVK RSIO ContactUs KET HEADCAPSCREW ® isaregisteredtrademark N of KI T 77AVK5500-RN8125SH 77AVK5500-RN1032SH 77AVK5500-RN1024SH Pouce et AVIBANK MFG., INC. 77AVK5500-RN610SH 77AVK5500-RN580SH 77AVK5500-RN470SH 77AVK5500-RN524SH 77AVK5500-RN518SH 77AVK5500-RN428SH 77AVK5500-RN420SH 77AVK5500-RN832SH 77AVK5500-RN632SH 77AVK5500-RN1015 77AVK5500-RN8125 77AVK5500-RN1032 77AVK5500-RN1024 77AVK5500-RN610 77AVK5500-RN580 77AVK5500-RN470 77AVK5500-RN624 77AVK5500-RN616 77AVK5500-RN524 77AVK5500-RN518 77AVK5500-RN428 77AVK5500-RN420 77AVK5500-RN832 77AVK5500-RN632 NOSE PIECE See NoteBelow* See NoteBelow* Inch and NOSE PIECE NOSE PIECE AT*, RN* AT, RN Français Métrique Metric

CCATALOGATALOG 1144 C C147 Français 18 jan18 2018 has m . Combined co . Contact Us Contact

M12

Installation Tools / Data Tools Installation Outils d'installation / Données Outils d'installation

SPP2 Tool™ System . w ww

0 Full Spaenaur Catalog Spaenaur Full been designed exclusively to install AVK’s been designed exclusively installed fasteners. The complete line of blind for Spin Pull to Pressure. term SPP2 Tool™stands into the AVK fastener, The SPP2 Tool™ spins the fasteners into a proper automatically pulling pressure as the upset installation utilizing to pressure insures the control method. Pulling installed correctly into AVK fastener will be thickness materials single, multiple or variable without adjustment. The New Modularized 1-888-252-638

: F

: P Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation [email protected] NEW SPP2 TOOL™ SYSTEM INTRODUCTION INTRODUCTION SYSTEM TOOL™ NEW SPP2 NON STOCK AVAILABLE UPON REQUEST AVAILABLE NON STOCK 1-800-265-8772 Metric Métrique AVK is committed to superior quality, reducing rework cost, and providing AVK is committed to superior quality, optimal joint integrity for our customer’s assemblies. With joint integrity in mind, AVK is pleased to introduce our SPP3 Tool™ Data Master PLC Linked Installation Tool System. AVK’s Data Master will analyze every insert installation by virtue of the on board PLC. The Data Master Pistol sets the insert and transmits air pressure signals to the PLC and converts that into usable installation verification information. This data appears on the systems computer screen as a good or faulty installation. The data is stored and collected for current and future evaluation to substantiate proper insert placement, indicating correct product assembly installation. AVK’s Data Master houses a redesigned space saving SPP3 Tool™ Power pack which is connected to the SPP3 Tool™ Pistol and linked to the on pertaining to your installation board PLC. The Data Master collects data for SPC Analysis that you have set program. For installation requirements and captures that data by using a standard spreadsheet software AVK SPP3 Tool™ Data Master verification for your company or customer’s assemblies, please consider the for secure joint integrity! NEW SPP3 TOOL™ DATA MASTER NEW SPP3 TOOL™ DATA THE TOOL SYSTEM FEATURES The Power Pack contains the air over hydraulic power system.The Power Pack is capable of providing 7,500 lbs. The Power Pack contains the air over hydraulic any AVK product in any thread size up to 1/2” and of pulling force enabling the tool to install with a NEW Pneumatic-Hydraulic Boost System providing a 15% to 20% faster cycle time for rapid installation. with a NEW Pneumatic-Hydraulic Boost with attached tool hangers, casters and durable air and hydraulic The all new SPP2 Tool™ comes furnished to pull the unit along the work floor. quick release fittings allowing the operator any AVK fastener with the simple adjustment of an air pressure regula- The Power Pack can be adjusted to pull a see through glass hydraulic fluid reservoir for visual inspection of the tor. AVK’s new robust design features easy adjustments. hydraulic fluid level, enabling quick and designed. It features a rocker style trigger and a high speed The SPP2 Tool™ is lightweight and ergonomically / spin-out of any tool on the market. The tool also has a patented motor that provides the quickest spin-in makes thread size changes quick and easy with no wrenches required. quick release thread adaptation kit that is a registered trademark ® AVIBANK MFG., INC. Pouce et Inch and Inch and AVK of CCATALOGATALOG 1144 C 182018Jan SPP2 TOOL C148 OUTIL SPP2 2.800” MIN. 2.800” The (71.1 mm) (71.1 3.71 LBS 3.71 APPROXIMATE WEIGHT (WITHTAK): The hydraulic pull force capability of the of forcecapability hydraulicpull The system is 90 psi dynamic psi 90 is system POWER CONTROLSYSTEMDIMENSIONS NOTE: See AVK SPP2TOOL™TOOLSPECIFICATIONS Pro grip f PRODUCT /TOOLSELECTION SPP2 Tool™ RDC EISTHREADSIZE PRODUCT SERIES (1.68 kg) (1.68 duct a PISTOLSTYLE TOOL stener R-N A-O A-W A-T A-R A-S A-H A-K, A-L L’utilisation est soumise aux Conditions d’utilisation disponibles duCatalogue sur Spaenaur.com etàla page et TC4 àla inTC5 de ce catalogue. Inc. © 2018Spaenaur Subject toCatalog Terms andConditions available ofUse atSpaenaur.com and onpage and TC2 atthebackTC3 ofthis catalog. Inc. © 2018Spaenaur 19.750” MIN. 19.750” MC tool SPP2 16.750” MIN. 16.750” 10.750” MAX. 10.750” ™ (273.1 mm) (273.1 s.

Tool hose assembly is available in 6', 8', 10', and 15' lengths. Hose weight 6'= 1.1 lbs., 8'= 1.32 lbs., 10'= 1.51 lbs., 15’= 2.0 lbs. 2.0 15’= lbs., 1.51 10'= lbs., 1.32 8'= lbs., 1.1 6'= weight Hose lengths. 15' and 10', 8', available6', is assemblyin hose section 9.380” MAX. 9.380” P (238.3 mm) (238.3 If :

(501.7 mm) (501.7

1- longer ™ (425.5 mm) (425.5 800 manualforsetup,sparepartsandpreventative maintenance. Tousécrite Inc. deSpaenaur l’autorisationne peut êtrereproduit, entoutoupartie, sans droitsLe catalogue réservés. 1-800-265-8772 Inc.of Spaenaur permissionthe written part, without orinwhole in be reproduced, not may Catalog reserved. All rights 1/4-3/8 #4-1/2 #6-3/8 #6-3/8 #4-1/2 #6-3/8 #6-1/2 #6-1/2

added (6.2 bars) (6.2 - gr 265-877 ip M3-M12 M4-M10 M4-M10 M3-M12 M4-M10 M4-M12 M4-M12 7.000” MAX. 7.000” M6-M10 (177.8 mm) (177.8 f

note asteners (495.3 mm) (495.3 . 2 19.500” :

SPP2 F 24.000” MAX. 24.000” SPP2 : (609.6 mm) (609.6

are 1- [email protected] Tool APPROXIMATELBS 4.29 (WITH WEIGHT TAK): 888-252-638

Tool bei IN-LINE STYLE POWERSTYLE IN-LINE TOOL STEE ™ 2.800” REF. 2.800” (71.1 mm) (71.1 ngus L

™ per i ,0 b.max lbs. 7,500 is

ed the 16.750” MAX. 16.750” (425.5 mm) (425.5 15.000” MAX. 15.000” con (381.00 mm) (381.00

pa 0

rt num rt ta

ww ct BRAS N/A N/A N/A N/A Spaenaur w S . ber (35.6 kN) (35.6 SpaenaurHome

s (1.95 kg) (1.95 be

or low a (129.54 mm) (129.54 5.100” MAX. 5.100” at 80 psi. Air pressure requirement to the power control power the to pressure requirement Air psi. 80 at pp wi ALUMINU

.co ro ll N/A N/A N/A N/A

be pr 0.700” 0.500” HANGER DIAMETER: iat

su m M 2600 RPM AIR M AIR RPM 2600 2.95 LBS 2.95 APPROXIMATE WEIGHT: .5’MAX. 0.250’ STROKE: PULLING e FullSpaenaur Catalog 5.810” MAX. 5.810” pp (147.6 mm) (147.6 MINI PISTOLSTYLE MINI TOOL (17.8 mm) (12.7 mm) ma (292.1 mm) (292.1 li 11.500” ed ndrel (1.34 kg) (1.34 with 1.700” MAX. 1.700” (6.4 MAX. MIN. (43.2 mm) (43.2 OT mm part n MONE OR ) N/A N/A N/A N/A ma 7.970” MAX. 7.970” (202.4 mm) (202.4 7.160” MAX. 7.160” (181.9 mm) (181.9 n L umber dr elsto instal AVK s. ContactUs ® (upto3/8& STAINLESS STEEL isaregisteredtrademark of l 1s Pouce et AVIBANK MFG., INC. N/A N/A N/A N/A N/A t an Inch and d 2nd M10 Français Métrique ) Metric

CCATALOGATALOG 1144 C C149 . Français 18 Jan 2018 18 Metric Outils portatifs Portable Tools Portable m co . Contact Us Contact /#6 - 1/4”. NOSE CONE

THREAD

TAKPT632TAK TAKPT832TAK TAKPT1032TAK TAKPT420TAK TAKPT518TAK TAKPT616TAK TAKPT470TAK TAKPT580TAK TAKPT610TAK TAKPT8125TAK TAKPT1015TAK ADAPTION KIT

M4 - M6

KIT

. ON w PTI /#6 - 1/4” studs. ww BEARING SET

Spaenaur No. 122255N Spaenaur

0 Full Spaenaur Catalog Spaenaur Full M4 - M6 THREAD ADA THREAD THREAD TNPT632TAK TNPT832TAK TNPT1032TAK TNPT420TAK TNPT518TAK TNPT616TAK TNPT470TAK TNPT580TAK TNPT610TAK TNPT8125TAK TNPT1015TAK /#6 - 3/8” and Studs /#6 - 3/8” and Studs ADAPTION KIT SPECIAL FEATURE—This tool nose cone design incorporates SPECIAL FEATURE—This tool is essential to proper installation. a special serrated tip that 1-888-252-638

: F

M4 - M10 Spaenaur Home Spaenaur

2 /#6 - 3/8” inserts, and All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous HEX DRIVE MANDREL SIZE THREAD 6-32 UNC 8-32 UNC 10-32 UNF 1/4-20 UNC 5/16-18 UNC 3/8-16 UNC M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO M8 x 1.25 ISO M10 x 1.50 ISO M4 - M10 1-800-265-877

: P Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation Ergonomics better than typical installation tools - no wrist torque, balanced better. Quieter than air tools. Process security- audible and visual verification. Bright LED to illuminate installation hole. Incrementally adjustable (90 settings) within five sizes either English or Good (I0)/No Good (NO) electric readout after each install. Battery "Brain"- RFID chip prevents overcharging and monitors energy level stopping any action at 20% of battery life - No dropping off of power- No loose inserts. Installation is controlled electrically- not mechanically. After 1.5 million cycles tested no drop in Torque readings. One charge sets from 200 to 400 inserts depending on material. Single trigger operation. Highly portable. No air lines. Existing AVK TAK's easily installed/removed. Sets THREAD ADAPTION KIT SELECTION THREAD ADAPTION POWER TOOL FEATURES - BENEFITS [email protected] Electronic Process Control ensures a stable and consistent installation. ensures a stable and consistent Electronic Process Control Easy to handle, simple adjustment. Easy to handle, simple High Process Security. Steel Inserts Suitable for High-Torque 1-800-265-8772 Portable Battery Power at your finger tips for Ease of Installation and Ergonomic comfort! of Installation and finger tips for Ease Power at your Portable Battery tool for the installation of Electronic Power controlled Battery Worldwide first completely Rivet Nuts and Blind Rivet Studs High-Torque Blind 122255N Spaenaur No. Metric Métrique is a registered trademark ® AVK PORTABLE BATTERY POWER TOOL - POWER TOOL BATTERY AVK PORTABLE AVIBANK MFG., INC. Pouce et Inch and Inch and AVK of CCATALOGATALOG 1144 C 182018Jan Outils portatifs C150 Portable Tools NON STOCKAVAILABLEUPONREQUEST AVK CVI TOOL FEATURES-BENEFITS durability. TheAVKCVI™toolistheperfectblendofcloudtechnologyandaprecisioninstallationbatterytool. battery. Ergonomic’sisassuredbyalightweight4.35poundtoolwithhighimpactcompositebodyfor Rest assuredthatyourCVI™toolwillhaveplentyofpowerforinstallationwiththeonboard20volt you tomonitorandadjustup10toolsfromyourworkstationorlaptopwithdigitalaccuracy. CVI™ CloudVerificationInstallationTooltoresolveyourassemblyconcerns.TheAVKSystemwillallow Concerned aboutpropertorqueinstallationandconfirmationofdatatoyourcustomer,trytheAVK of wirelessconnectivelinksareatAVKforyou! Cloud datacollection,torqueinstallation,tooladjustmentandprogrammabilityofyourbyway Two 20Vbatteryoptionprovidesmaximumruntime. Super brightLEDheadlightwithprogrammableon/off. Brushless motortestedbeyondamillioncycles. Programmable torque,angleandspeedsettings. installation dataviayourworkstationorlaptop. Control 10tools,verifytorqueinstallationandgather Module (PCM). real-time dataarchivingviaProcessCommunication with I/O,automaticconfigurationswitchingand Wireless communicationoptiondeliversprocesscontrol Well balancedforeaseofhandling. Ergonomic, 4.35pounds Stores cycledataforupto1,200rundowns. fastening configurations. Up to8user-programmable programming inputs. displays resultsandaccepts User friendlydisplaymodule exception ofR-NRivetNuts. Will setallAVKproductswiththe Contact aSpaenaurSalesRepresentative. adaption kitsareavailableaswell. CVI™ usesstandardAVK/TAK’sandspecial set-up programming inputs. displays resultsandoffersquick Digital backlitdisplaymodule L’utilisation est soumise aux Conditions d’utilisation disponibles duCatalogue sur Spaenaur.com etàla page et TC4 àla inTC5 de ce catalogue. Inc. © 2018Spaenaur Subject toCatalog Terms andConditions available ofUse atSpaenaur.com and onpage and TC2 atthebackTC3 ofthis catalog. Inc. © 2018Spaenaur P ™ :

- 265-877 ud Verific

(2kg.) 2

F : a

1- your laptop. can programordownloaddatafromthe toolwith Using ICSsoftwareandaUSBcableconnection you tion Inst [email protected] 888-252-638 a llation 0

ww ) INSERT TOOL w

. SpaenaurHome

NOSE CONE

.co m FullSpaenaur Catalog BEARING SET THREADADA collection andconfiguration programming. 10 toolstobeconnectedonePCMfor data Wireless communicationoptionallows up to PTI ON KIT AVK MANDREL ContactUs ® isaregisteredtrademark of AVIBANK MFG., INC. Pouce et Inch and HEX DRIVE Français Métrique Metric

CCATALOGATALOG 1144 C

C151 Français 20 FEB 20 2018 4-40 UNC 6-32 UNC 8-32 UNC 10-32 UNF 10-24 UNC m 3/8-16 UNC 1/4-20 UNV M3 x 0.5 ISO M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO 5/16-18 UNC THREAD SIZE M8 x 1.25 ISO M10 x 1.5 ISO TAAT916 co . : Contact Us Contact

No. TION A

1 - #10-32 Conversion Kit 1 - 1/4"-20 Conversion Kit 1 - 5/16"-18 Conversion Kit AAT202-440 AAT202-632 AAT202-832 AAT202-420 AAT202-518 AAT202-616 AAT202-350 AAT202-470 AAT202-580 AAT202-610

AAT202-1024 AAT202-1032 AAT202-8125 AAT202-1015 MANUFACTURER ALL

Rivet Nut Installation Tools Nut Installation Rivet Thread insert fully onto mandrel. Place into hole. Hold grip bar while turning the “T” handle clockwise until insert is installed. Turn “T” handle counter clockwise to remove from insert. . INS Outils d'installation d'écrous-rivets Outils d'installation w No. TAA184 ww SPAENAUR

TAAT202-440 TAAT202-632 TAAT202-832 TAAT202-420 TAAT202-518 TAAT202-616 TAAT202-350 TAAT202-470 TAAT202-580 TAAT202-610 TAAT202-1024 TAAT202-1032 TAAT202-8125 TAAT202-1015

0 Full Spaenaur Catalog Spaenaur Full KIT CONTAINS: 1 - Hand tool 1 - #6-32 Conversion Kit 1 - #8-32 Conversion Kit 1 - #10-24 Conversion Kit ’s… VK 4-40 UNC 6-32 UNC 8-32 UNC 10-32 UNF 10-24 UNC 3/8-16 UNC 1/4-20 UNV 1-888-252-638 M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO 5/16-18 UNC THREAD SIZE M8 x 1.25 ISO M10 x 1.5 ISO

A The TAA112 is ideal for prototyping or making repairs The TAA112 is ideal for prototyping or making with the A-T and A-W Series threaded inserts. It features with the A-T and A-W Series threaded inserts. assembly. a patented Quick Change thread size nose : F all

Spaenaur Home Spaenaur 2 inst No. to All rights rights All reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc.

Tous droits réservés. réservés. Le catalogue droits sans en tout ou en partie, ne peut être reproduit, l’autorisation de Spaenaur Inc. écrite Tous AAT916-440 AAT916-632 AAT916-832 AAT916-420 AAT916-518 AAT916-616 AAT916-470 AAT916-580 AAT916-610 AAT916-1024 AAT916-1032 AAT916-8125 AAT916-1015 MANUFACTURER AT AND AW SERIES STANDARD PRODUCT ed r MODEL TAAT916 AAT916 ee : in 1-800-265-877

No. : P Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. of this TC3 at the back TC2 and and on page at Spaenaur.com of Use available and Conditions Terms to Catalog Subject © 2018 Spaenaur Inc. © 2018 Spaenaur Inc. catalogue. de ce TC5 in à la TC4 et page et à la Spaenaur.com sur du Catalogue disponibles d’utilisation Conditions aux soumise est L’utilisation SPAENAUR ION TAAT916-440 TAAT916-632 TAAT916-832 TAAT916-420 TAAT916-518 TAAT916-616 TAAT916-470 TAAT916-580 TAAT916-610 eng TAAT916-1024 TAAT916-1032 TAAT916-8125 TAAT916-1015 AT [email protected] 6-32 UNC 8-32 UNC 10-32 UNF 10-24 UNC 3/8-16 UNC 1/4-20 UNV M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO are are 5/16-18 UNC THREAD SIZE M8 x 1.25 ISO M10 x 1.5 ISO ALL Thread AVK part onto tool. Hole into Place Squeeze handles. ST TAA571-G TOOL KIT IN PLASTIC BOX This tool kit is designed to set the A-H, A-K, A-L and A-O Series inserts and other similar types of threaded inserts. The enclosed tool, TAA170 is designed for quick installation with simple change over from one thread size to another. IN page s s 6-32 UNC 8-32 UNC No. 10-32 UNF 10-24 UNC 3/8-16 UNC 1/4-20 UNV M4 x 0.7 ISO M5 x 0.8 ISO M6 x 1.0 ISO 5/16-18 UNC THREAD SIZE M8 x 1.25 ISO M10 x 1.5 ISO AA271-420 AA271-470 AA271-580 AA271-610 AA271-632 AA271-832 thi AA271-518* AA271-616* AA271-1024 AA271-1032 AA271-8125* AA271-1015* MANUFACTURER 1-800-265-8772 No. AA184-632 AA184-832 AA184-420 AA184-518 AA184-616 AA184-470 AA184-580 AA184-610 AA184-1024 AA184-1032 AA184-8125 AA184-1015 own on own No. MANUFACTURER sh SPAENAUR TAA271-632 TAA271-832 TAA271-420 TAA271-518 TAA271-616 TAA271-470 TAA271-580 TAA271-610

MODEL TAA184 AA184 TAA271-1024 TAA271-1032 TAA271-8125 TAA271-1015 1ST AND 2ND GRIP PRODUCT ls AK, AL, AP, AND AO SERIES *These sizes cannot be used with 2nd grip AVK fasteners cannot be used with 2nd grip AVK sizes *These o to No. Metric Métrique SPAENAUR TAA184-632 TAA184-832 TAA184-420 TAA184-518 TAA184-616 TAA184-470 TAA184-580 TAA184-610 TAA184-1024 TAA184-1032 TAA184-8125 TAA184-1015 AVK HAND TOOL SPECIFICATIONS TOOL AVK HAND EXPENDABLE TOOLS EXPENDABLE The following expendable tools are ideal for field repairs or consumer installation of AVK’s products. Thread the AVK fastener installation of AVK’s products. Thread tools are ideal for field repairs or consumer The following expendable box wrench or wrench and turn the mandrel with another all the way up. Hold the tool with a box onto the tool mandrel ratchet wrench until the AVK fastener is installed. ratchet wrench until The The The TAA170 tool is ideal for prototyping or making repairs The TAA170 tool is ideal for prototyping or with the A-K, A-L, A-H, A-P, A-O, E-L and E-H Series with the A-K, A-L, A-H, A-P, A-O, E-L and E-H threaded inserts. TAA170 (AA170) PLIER TOOL HI-TORQUER™ TAA112 (AA112) is a registered trademark ® AVIBANK MFG., INC. Pouce et Inch and Inch and AVK of CCATALOGATALOG 1144 1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français

Hand Tools Inch and Metric Outils manuels Pouce et Métrique AVK HAND TOOL SPECIFICATIONS The hand tools shown on this page are used to install AVK’s... *

AA480 & AA510 NEW “WRENCH-LESS” QUICK-RELEASE CONVERSION KIT To provide a more user friendly manual tool for our marketplace, AVK’s AA480 and AA510 installation hand tools now incorporate a new “Wrench-Less” quick-release conversion kit. AVK will continue to support pre-existing tools not utilizing this new conversion C kit. When ordering conversion kits and mandrels for pre-existing tools, remove the “N” from the New part number shown in the chart below. Please contact Spaenaur Sales Desk for additional Mandrel design change clarification.

Spaenaur No. 880-A04-1A DOUBLE ACTION LEVER TOOL The AA480 tool features a visual stroke indicator and a convenient spin-off removal knob. This tool installs the full range of AVK’s spinwall technology product in steel and aluminum and limited sizes of steel and aluminum rivet nuts. See chart below. INSTALLATION: Set the appropriate stroke per the AVK tool instruction Squeeze tool handles together until product sheet. is fully collapsed. Thread product fully onto tool mandrel. Spin center knob counter-clockwise unthreading Place into the hole in your parent material. tool mandrel from installed product.

Spaenaur No. 880-A05-1P PLUNGER-DOUBLE ACTION LEVER TOOL The AA510 tool features a visual stroke indicator and a quick acting pull to remove plunger. Due to its larger size, this tool installs the full range of AVK’s Spinwall Technology™ Threaded Insert Product in all materials and various steel and aluminum rivet nuts. See chart below. INSTALLATION: Set the appropriate stroke per the AVK tool instruction Place into hole in your parent material. sheet. Squeeze tool handles together until product is Withdraw plunger from tool. fully collapsed. Hold product over tool mandrel while pushing plunger Pull plunger from tool unthreading mandrel into tool fully threading product onto the tool mandrel. from installed product.

•฀Denotes฀the฀product฀can฀be฀installed฀with฀the฀AA480฀tool.฀+฀Denotes฀the฀product฀can฀be฀installed฀with฀the฀AA510฀tool.

INSERT A-L, A-K, A-H, A-P, A-O INSERT R-N, E-L, E-H, A-R* STUD MATERIAL SERIES INSERTS MATERIAL SERIES RIVET NUTS MATERIAL A-S SERIES STUDS THREAD SIZE CONVERSION REPLACEMENT CONVERSION REPLACEMENT CONVERSION REPLACEMENT STEEL ALUM STEEL KIT# MANDREL# STEEL ALUM KIT# MANDREL# KIT# MANDREL# 4-40 UNC N/A N/A •฀฀+ •฀฀+ AA483-440N 18AA481-440N N/A N/A 6-32 UNC •฀฀+ •฀฀+ AA481-632N 18AA481-632N •฀฀+ •฀฀+ AA483-632N 18AA481-632N •฀ AA485-632N 18AA485-632N 8-32 UNC •฀฀+ •฀฀+ AA481-832N 18AA481-832N •฀฀+ •฀฀+ AA483-832N 18AA481-832N •฀ AA485-832N 18AA485-832N 10-24 UNC •฀฀+ •฀฀+ AA481-1024N 18AA481-1024N •฀฀+ •฀฀+ AA483-1024N 18AA481-1024N •฀ AA485-1024N 18AA485-1024N 10-32 UNF •฀฀+ •฀฀+ AA481-1032N 18AA481-1032N •฀฀+ •฀฀+ AA483-1032N 18AA481-1032N •฀ AA485-1032N 18AA485-1032N 1/4-20 UNC •฀฀+ •฀฀+ AA481-420N 18AA481-420N •฀฀+ •฀฀+ AA483-420N 18AA481-420N •฀ AA485-420N 18AA485-420N 5/16-18 UNC •฀฀+ •฀฀+ AA481-518N 18AA481-518N ฀฀฀+ •฀฀+ AA483-518N 18AA481-518N •฀ AA485-518N 18AA485-518N 3/8-16 UNC •฀฀+ •฀฀+ AA481-616N 18AA481-616N ฀฀฀+ AA483-616N 18AA481-616N •฀฀ AA485-616N 18AA485-616N 1/2-13 UNC ฀฀฀+ •฀฀+ AA481-813N 18AA481-813N N/A N/A N/A N/A

M3 x 0.5 ISO N/A N/A •฀฀+ •฀฀+ AA483-350N 18AA481-350N N/A N/A 4 M4 x 0.7 ISO •฀฀+ •฀฀+ AA481-470N 18AA481-470N •฀฀+ •฀฀+ AA483-470N 18AA481-470N •฀ AA485-470N 18AA485-470N M5 x 0.8 ISO •฀฀+ •฀฀+ AA481-580N 18AA481-580N •฀฀+ •฀฀+ AA483-580N 18AA481-580N AA485-580N 18AA485-580N

•฀ ALOG 1

M6 x 1.0 ISO •฀฀+ •฀฀+ AA481-610N 18AA481-610N •฀฀+ •฀฀+ AA483-610N 18AA481-610N •฀ AA485-610N 18AA485-610N AT M8 x 1.25 ISO •฀฀+ •฀฀+ AA481-8125N 18AA481-8125N ฀฀฀+ •฀฀+ AA483-8125N 18AA481-8125N •฀ AA485-8125N 18AA485-8125N 14 C CATALOG M10 x 1.5 ISO •฀฀+ •฀฀+ AA481-1015N 18AA481-1015N ฀฀฀+ AA483-1015N 18AA481-1015N •฀ AA485-1015N 18AA485-1015N M12 x 1.75 ISO ฀฀฀+ •฀฀+ AA481-12175N 18AA481-12175N N/A N/A N/A N/A NOTE: Additional UNF fine thread sizes are available. Contact Spaenaur Sales Desk for details. WARNING: Failure to adjust the approprioate stroke setting per the AVK tool instruction sheet may damage the tool. *Contact Spaenaur Sales Desk for A-R Series Installation Tool Data

® © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. AVK is a registered trademark Subject to CatalogP: 1- Terms800 and- Conditions265-877 of Use 2available F: at1- Spaenaur.com888-252-638 and on page TC20 and ww TC3 wat the. back of this catalog. .com C152 © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. of AVIBANK MFG., INC. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue. 18 Jan 2018 1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français

Inch and Metric Product Information Pouce et Métrique Information sur les produits DESIGN CONSIDERATIONS/APPLICATION CHECKLIST The following BEST PRACTICE information should be considered to insure proper application design when using AVK fasteners. If you have any application questions, please contact a Spaenaur Sales Representative.

PARENT MATERIAL The parent material should be dense enough to support the hole fill and clamp load applied by the AVK fastener during installation. Its thickness should be within the grip range of the AVK fastener. Experimen- tation is suggested to determine optimum fastener selection for plastics. C

HOLE SIZE The hole produced in the parent material should be per the AVK specifications. Tolerance for paint or coating buildup should be included to avoid an undersized hole condition. The hole should be 90° square to the parent material.

AVK PART ACCESS The AVK fastener head should sit flat on the parent material. An obstruction to the tail of the AVK product or to the access of the power tool can be corrected by contacting Spaenaur for alternative fastener designs and tooling configurations. The AVK tool should be held perpendicular to the application to avoid excess mandrel wear.

BACKSIDE SURFACE The backside surface of the parent material should not contain a punch slug or excessive burr that BURR or exceeds the grip range of the AVK fastener. Such large obstructions may prohibit the AVK fastener from TAB installing properly.

AIR SUPPLY AVK's Spinwall Technology™ ARO brand installation tools require a pressure range of 60-110 PSI (4.1-7,5 BARS) at 25 S.C.F.M. of volume. Hose and fitting inside diameters need to be a minimum of 5/16 (7.92). An inline oiler and pressure regulator is required. Pressure should be measured as dynamic with the tool running.

MATING PART HOLE SIZE/ALIGNMENT The mating part being attached should be non-rotational and contact the head of the AVK fastener. Its hole size should be .040 (1.0) smaller than the head diameter of the AVK fastener. The alignment of the mating part must provide perpendicular entry of the mating fastener into the AVK fastener.

MATING FASTENER For the A-K, A-L, A-T, A-W and A-O Series the mating fastener should be of a "free-spinning” design and of the grade or class as indicated in this catalog. If a mechanical, chemical locking or prevailing torque element is required, AVK recommends the design selection of the A-H Series in a hex punched hole. Specification of a dog point screw will minimize cross threading and speed the assembly process in any AVK application. Mating screws should be hand started and then power driven to minimize cross threading. C CATALOG 14 AT ALOG 1 ASSEMBLY TORQUE

4 For appropriate assembly torques, see the suggested assembly torque data contained on page C154. AVK’s products, when used per the data provided in this catalog, have been designed to be compatible with the torque requirements of Grade 5 or Metric Class 8.8/9.8 screws. AVK suggests customer testing to determine the optimum torque due to mating component fit and mating fastener lubrication/finish variations.

® AVK is a registered trademark © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. SubjectP: 1-800-265-877 to Catalog Terms and Conditions2 ofF :Use 1-888-252-638 available at Spaenaur.com and0 on pageww TC2w and. TC3 at the back of this catalog. .com of AVIBANK MFG., INC. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. C153 L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue. 18 Jan 2018 C 182018Jan Données detest C154 Test Data the AVKpart“D”dim. is restrainedbyaholddownring3x parent material.Thematerial pull theAVKproductfrom PULL-OUT kilonewtons (kN) Unified (Inch)threadsizedataisprovidedinpounds(lbs.)forforceandinch(in-lbs.)torque. the loadtobeappliedcomesclosepublisheddata. factors mayaffectAVKproductperformance.Werecommendtestingyourapplicationwhenanexactstrengthfigureisrequiredor The figuresshownareaveragesofmultipletests.AVKrecommendsthatthisdatabeusedonlyasaguidesincevariousapplication The testdataonthispageisintendedtoprovidethedesignerwithapproximatestrengthvaluesinvariousmaterialsandthicknesses. NOTE 1:Ultimatetorquetestingshouldbedone usingactualcustomercomponentsandmatinghardwareduetoplating/lubrication *NOTE 3:R-NSeriesSpin-out. Testdropvaluesarekeyedsteelrivetnuts testedinsteelplatesandkeyedaluminum rivetnut NOTE 2:FortestdataonotherAVKproducts, contact SpaenaurSalesDeskfordetails. exceed theultimatetorquestrengthofappropriate grade/classofmatinghardware. AVK TESTDATA R-N SERIES A-S SERIES A-H SERIES A-L / A-K SERIES THREAD L’utilisation est soumise aux Conditions d’utilisation disponibles duCatalogue sur Spaenaur.com etàla page et TC4 àla inTC5 de ce catalogue. Inc. © 2018Spaenaur Subject toCatalog Terms andConditions available ofUse atSpaenaur.com and onpage and TC2 atthebackTC3 ofthis catalog. Inc. © 2018Spaenaur 5/16-18 5/16-18 5/16-18 5/16-18 istheforcerequiredto 1/2-13 3/8-16 1/4-20 3/8-16 1/4-20 1/2-13 3/8-16 1/4-20 3/8-16 1/4-20 10-32 10-24 10-32 10-24 10-32 10-24 SIZE 8-32 6-32 8-32 6-32 8-32 6-32 M12 M10 M10 M12 M10 M10 M8 M6 M5 M4 M8 M6 M5 M4 M8 M6 M8 M6 M5 M4 PULL-OUT P :

1- forforceand A-L .6m .7m 2.28mm 1.57mm 0.76 mm 800 00i..6 n .090in. .062in. .030 in. Tousécrite Inc. deSpaenaur l’autorisationne peut êtrereproduit, entoutoupartie, sans droitsLe catalogue réservés. 1-800-265-8772 Inc.of Spaenaur permissionthe written part, without orinwhole in be reproduced, not may Catalog reserved. All rights 520 520 510 460 460 310 310 480 480 460 420 420 270 270 620 630 580 350 520 520 510 460 460 310 310 2.3 2.3 2.3 2.0 1.4 2.3 2.3 2.3 2.0 1.4 2.1 2.1 2.0 1.9 1.2 2.7 2.7 2.5 1.5 , A-K - 265-877 , A-H 2000 1370 1370 1270 1020 1020 1370 1370 1270 1020 1020 1110 1110 1150 1320 1230 1210 850 850 850 850 990 990 660 660 860 8.9 6.1 4.9 6.1 6.1 5.7 4.5 3.8 6.1 5.7 4.5 3.8 4.9 5.1 4.4 2.9 5.8 5.4 5.3 3.7

newton meters(Nm) , 2 A-S the AVKpart“D”dim. is supportedbyaholddownring3x parent material.Thematerial push theAVKproductthrough PUSH-OUT

F : S

1- 3040 2380 2380 2090 1730 1730 1570 1570 2380 2380 2090 1730 1730 1570 1570 2240 2050 2010 1770 1870 1870 1780 1670 1670 13.5 10.6 10.6 10.6 10.6 eries p 990 990 [email protected] 9.3 7.7 7.0 9.3 7.7 7.0 9.9 9.0 8.9 7.8 8.3 8.3 7.9 7.4 4.4 T E E H S L E E T S NI 888-252-638 istheforcerequiredto PUSH-OUT r .7m 0.76mm 3.17 mm 15i..030in. .125 in. odu 4480 3810 3810 3250 2670 2670 1830 1830 3810 3810 3250 2670 2670 1830 1830 2280 2280 2690 2520 2520 19.9 17.0 17.0 14.5 11.9 17.0 17.0 14.5 11.9 10.1 10.1 12.0 11.2 860 860 8.1 8.1 3.8 c t fortorque. w 0 as

TUO-LLUP 500 500 490 440 440 320 320 500 500 490 440 440 320 320 780 590 540 400 460 460 430 380 380 270 270 2.2 2.2 2.2 2.0 1.4 2.2 2.2 2.2 2.0 1.4 3.4 2.6 2.6 1.7 2.0 2.0 1.9 1.7 1.2

ww tested withthe w IN ALUMINUMSHEET

. .7m .8m .7m .7m 1.57mm 3.17mm 3.17mm 2.28mm 1.57 mm 02i..9 n 15i..2 n .062in. .125in. .125in. .090in. .062 in. SpaenaurHome 1830 1350 1350 1180 1000 1000 1350 1350 1180 1000 1000 1390 1180 1110 1050 1050 1530 830 830 830 830 850 880 880 660 660

8.1 6.0 6.0 5.3 4.5 3.7 6.0 6.0 5.3 4.5 3.7 6.1 5.2 2.9 3.7 4.7 4.7 6.8 3.9 2.9

product. influencing clamploadontheAVK material afterinstallationwithout turn theAVKproductinparent SPIN-OUT

2940 2230 2230 1920 1700 1700 1450 1450 2230 2230 1920 1700 1700 1450 1450 2643 2110 2244 2100 1680 1680 2240 1550 1550 13.1 11.7 10.0 830 830

9.9 9.9 8.5 7.6 6.5 9.9 9.9 8.5 7.6 6.5 9.3 9.9 9.3 7.5 7.5 6.9 3.7 -4 finish

isthetorquerequiredto .co SPIN-OUT m 4350 3670 3670 3020 2380 2380 1580 1580 3670 3670 3020 2380 2380 1580 1580 2890 2890 3210 2050 2050 19.4 16.3 16.3 13.4 10.6 16.3 16.3 13.4 10.6 12.9 12.9 14.3 840 840 7.0 4.4 9.1 3.7 . R-N FullSpaenaur Catalog t ested Se ries

3880 3700 2690 2000 1160 1140 17.2 16.4 11.9 in 880 580 580 630 630 8.8 5.1 5.0 3.8 2.5 2.7

2024-T4 variables. wa LEETS NI TUO-HSUP s

based onindustrystandards. of torquesuggestedforGrade5or ASSEMBLY TORQUE Metric Class8.8/9.8 aluminum Metric C 1.57 mm

AVK’s .062 in. admium pl 53.3 40.2 30.3 16.8 27.1 27.1 14.7 450 320 180 100 240 240 130 9.0 4.5 80 80 40 40

fasteners AVK NON-ROTATIONAL MATING PART LEETS NI ASSEMBLY TORQUE data isprovidedin

plates ContactUs ® IN ALUM isaregisteredtrademark 48.8 13.5 12.7 10.6 25.5 25.5 10.2 220 120 110 230 230 7.9 4.5

60 90 70 70 40 40 . have *TUO-NIPS of ated. Pouce et AVIBANK MFG., INC.

been matinghardware istheamount Inch and ASSEMBLY TORQUE

designed 72.0 42.0 21.0 42.0 21.0 72.0 42.0 21.0 42.0 21.0 660 276 156 276 156 660 276 156 276 156 8.6 5.0 2.5 8.6 5.0 2.5 8.6 8.6 5.0 2.5 75 36 32 22 12 75 36 32 22 12 75 75 36 32 22 12 Français Métrique

Metric to

CCATALOGATALOG 1144 1-800-265-8772 [email protected] Spaenaur Home Full Spaenaur Catalog Contact Us Français

Inch and Metric Technical Data Pouce et Métrique Données techniques

DECIMAL EQUIVALENTS & DRILL SIZE CHART DRILL INCH METRIC DRILL INCH METRIC DRILL INCH METRIC DRILL INCH METRIC DRILL INCH METRIC SIZE (Dec.) (mm) SIZE (Dec.) (mm) SIZE (Dec.) (mm) SIZE (Dec.) (mm) SIZE (Dec.) (mm) 80 .0135 .343 50 .0700 1.778 22 .1570 3.988 G .2610 6.630 31/64 .4844 12.304 79 .0145 .368 49 .0730 1.854 21 .1590 4.039 17/64 .2656 6.746 1/2 .5000 12.700 1/64 .0156 .396 48 .0760 1.930 20 .1610 4.089 H .2660 6.756 33/64 .5156 13.096 78 .0160 .406 5/64 .0781 1.984 19 .1660 4.216 I .2720 6.909 17/32 .5312 13.492 77 .0180 .457 47 .0785 1.994 18 .1695 4.305 J .2770 7.036 35/64 .5469 13.891 76 .0200 .508 46 .0810 2.057 11/64 .1719 4.366 K .2810 7.137 9/16 .5625 14.288 75 .0210 .533 45 .0820 2.083 17 .1730 4.394 9/32 .2812 7.142 37/64 .5781 14.684 74 .0225 .572 44 .0860 2.184 16 .1770 4.496 L .2900 7.366 19/32 .5938 15.083 73 .0240 .609 43 .0890 2.261 15 .1800 4.572 M .2950 7.493 39/64 .6094 15.479 C 72 .0250 .635 42 .0935 2.375 14 .1820 4.623 19/64 .2969 7.541 5/8 .6250 15.875 71 .0260 .660 3/32 .0938 2.383 13 .1850 4.700 N .3020 7.671 41/64 .6406 16.271 70 .0280 .711 41 .0960 2.438 3/16 .1875 4.763 5/16 .3125 7.938 21/32 .6562 16.667 69 .0292 .742 40 .0980 2.489 12 .1890 4.801 O .3160 8.026 43/64 .6719 17.066 68 .0310 .787 39 .0995 2.527 11 .1910 4.851 P .3230 8.204 11/16 .6875 17.463 1/32 .0312 .792 38 .1015 2.578 10 .1935 4.915 21/64 .3281 8.334 45/64 .7031 17.859 67 .0320 .813 37 .1040 2.642 9 .1960 4.978 Q .3320 8.433 23/32 .7188 18.258 66 .0330 .838 36 .1065 2.705 8 .1990 5.055 R .3390 8.611 47/64 .7344 18.654 65 .0350 .889 7/64 .1094 2.779 7 .2010 5.105 11/32 .3438 8.733 3/4 .7500 19.050 64 .0360 .914 35 .1100 2.794 13/64 .2031 5.159 S .3480 8.839 49/64 .7656 19.446 63 .0370 .940 34 .1110 2.819 6 .2040 5.182 T .3580 9.093 25/32 .7812 19.842 62 .0380 .965 33 .1130 2.870 5 .2055 5.220 23/64 .3594 9.129 51/64 .7969 20.241 61 .0390 .991 32 .1160 2.946 4 .2090 5.309 U .3680 9.347 13/16 .8125 20.638 60 .0400 1.016 31 .1200 3.048 3 .2130 5.410 3/8 .3750 9.525 53/64 .8281 21.034 59 .0410 1.041 1/8 .1250 3.175 7/32 .2188 5.558 V .3770 9.576 27/32 .8438 21.433 58 .0420 1.067 30 .1285 3.264 2 .2210 5.613 W .3860 9.804 55/64 .8594 23.829 57 .0430 1.092 29 .1360 3.454 1 .2280 5.791 25/64 .3906 9.921 7/8 .8750 22.225 56 .0465 1.181 28 .1405 3.569 A .2340 5.944 X .3970 10.084 57/64 .8906 22.621 3/64 .0469 1.191 9/64 .1406 3.571 15/64 .2344 5.954 Y .4040 10.262 29/32 .9062 23.017 55 .0520 1.321 27 .1440 3.658 B .2380 6.045 13/32 .4062 10.317 59/64 .9219 23.416 54 .0550 1.397 26 .1470 3.734 C .2420 6.147 Z .4130 10.490 15/16 .9375 23.813 53 .0595 1.511 25 .1495 3.797 D .2460 6.248 27/64 .4219 10.716 61/64 .9531 24.209 1/16 .0625 1.588 24 .1520 3.861 1/4 .2500 6.350 7/16 .4375 11.113 31/32 .9688 24.608 52 .0635 1.613 23 .1540 3.912 E .2500 6.350 29/64 .4531 11.509 63/64 .9844 25.004 51 .0670 1.702 5/32 .1562 3.967 F .2570 6.528 15/32 .4688 11.908 1 1.000 25.400 DECIMAL EQUIVALENT OF STANDARD GAUGE SUGGESTED ASSEMBLY TORQUE VALUES TO SHEET ALUMINUM & SHEET METAL PRODUCE CORRESPONDING BOLT LOADS

GAUGE GAUGE GAUGE SAE GRADE 5 BOLTS NO. NO. NO. THREAD SIZE OF OF OF CLAMP LOAD ASSY TORQUE - DRY ASSY TORQUE - PLATED GAUGE ALUM STEEL GAUGE ALUM STEEL GAUGE ALUM STEEL (B&S) (US STD.) (B&S) (US STD.) (B&S) (US STD.) #4-40 380 lbs. 8 in.- lbs. 6 in.- lbs. #6-32 580 lbs. 16 in.- lbs. 12 in.- lbs. 10 .1019 .1345 17 .0453 .0538 24 .0201 .0239 #8-32 900 lbs. 30 in.- lbs. 22 in.- lbs. 11 .0907 .1196 18 .0403 .0478 25 .0179 .0209 #10-24 1120 lbs. 43 in.- lbs. 32 in.- lbs. #10-32 1285 lbs. 49 in.- lbs. 36 in.- lbs. 12 .0808 .1046 19 .0359 .0418 26 .0159 .0179 1/4-20 2000 lbs. 96 in.- lbs. 75 in.- lbs. 13 .0720 .0897 20 .0320 .0359 27 .0142 .0164 1/4-28 2300 lbs. 120 in.- lbs. 86 in.- lbs. 14 .0641 .0747 21 .0285 .0329 28 .0126 .0149 5/16-18 3350 lbs. 204 in.- lbs. 156 in.- lbs. 15 .0571 .0673 22 .0253 .0299 29 .0113 .0135 5/16-24 3700 lbs. 228 in.- lbs. 168 in.- lbs. 16 .0508 .0598 23 .0226 .0269 30 .0100 .0120 3/8-16 4950 lbs. 360 in.- lbs. 276 in.- lbs. 3/8-24 5600 lbs. 420 in.- lbs. 300 in.- lbs. METRIC CONVERSIONS LINEAR Multiply INCHES by 25.4 to get MILLIMETERS (mm) Multiply MILLIMETERS (mm) by .03937 to get INCHES Multiply FEET by 0.3048 to get METERS (m) Multiply METERS (m) by 3.281 to get FEET Multiply INCHES by 2.54 to get CENTIMETERS (cm) Multiply CENTIMETERS (cm) by .3937 to get INCHES TORQUE Multiply INCH-POUNDS by 0.11298 to get NEWTON-METERS (Nm) Multiply NEWTON-METERS (Nm) by 8.851 to get INCH-PONDS Multiply FOOT-POUNDS by 1.3558 to get NEWTON-METERS (Nm) Multiply NEWTON-METERS (Nm) by 0.7376 to get FOOT-POUNDS FORCE Multiply POUNDS by .00445 to get KILONEWTONS (kN) Multiply KILONEWTONS (kN) by 224.72 to get PONDS

C CATALOG 14 PRESSURE Multiply PSI by .069 to get BARS Multiply BARS by 14.5 to get PSI AT ALOG 1 TROUBLE SHOOTING Contact Sales Desk for additional help and solutions 4 MOTPMYS KCEHC TSIL

1. Tool does not operate. Air lines clear? Tool inlet clear? Tool exhaust clear? Motor Lubrication? 2. Tool runs but stalls before product is installed. Proper tool RPM for thread size being used? Adequate air pressure with tool running? TAK bearing in place and lubricated? Damaged mandrel? Wrong grip part?

3. Tool strips product threads. Proper tool RPM for thread size being used? Too much air pressure? Has the mandrel worn too small? 4. Mandrels wear/break. Is there too much air pressure? Is the tool being held perpendicular during installation?

Plating Data Données sur le placage PLATING CHART

AK, AL, AH, AS, AO, AT, AW, RN, EL, & EH SERIES PRODUCT FINISHES

WHITE RED AVK# TYPE SPECIFICATION THICKNESS COLOR CORROSION CORROSION

1 Plain Finish Plain with clear protective coating Clear No Req. No Req.

AMS-QQ-P-416, TY I Class 3, clear and 2* Cad Plate/Clear .0002 min Silver No Req. No Req. C clear protective coating

ASTM-B-633, Fe/Zn 8µ, with clear .0003 min Silver 12 hrs No Req. 3 Zinc protective coating AVK SPEC ESP-P-006 .0003 min Silver 12 hrs No Req.

ASTM-B-633, Fe/Zn 8µ .0003 min Silver 12 hrs No Req. 3R Zinc AVK SPEC ESP-P-006 .0003 min Silver 12 hrs No Req.

ASTM-B-633, Fe/Zn 8µ, with clear .0003 min Silver 72 hrs No Req. 3T Zinc Trivalent protective coating AVK SPEC ESP-P-003 .0003 min Silver 120 hrs 384 hrs

ASTM-B-633, Fe/Zn 8µ, with clear Yellow Zinc .0005 min Yellow 96 hrs No Req. 4 protective coating

ASTM-B-633, Fe/Zn 8µ, with clear .0003 min Yellow 120 hrs No Req. Yellow Zinc 4T protective coating Trivalent AVK SPEC ESP-P-002 .0003 min Yellow 120 hrs 458 - 800 hrs

MIL-T-10727 TY I with clear Dull Tin .0003 min Gray No Req. 24 hrs 5* protective coating

QQ-S-365 TY III, Grade A with clear Silver Plate .0003 min Silver 96 hrs No Req. 6* protective coating

AMS-QQ-P-416 TY II, class 2 yellow 7 Cadmium dichromate with clear protective .0003 min Gold 96 hrs No Req. coating

MIL-C 5541 with clear protective No Color Chemical Film Film 120 hrs No Req. 8 coating Specified

BPS-TZ-327 8µ, with clear .0003 min Dull Gold 120 hrs 300 hrs 9 Yellow Tin Zinc protective coating AVK SPEC ESP-P-007 .0003 min Dull Gold 120 hrs 300 hrs BPS-TZ-327 10µ, with clear .0004 min Dull Gold 120 hrs 400 hrs 9A Yellow Tin Zinc protective coating AVK SPEC ESP-P-007 (9A) .0004 min Dull Gold 120 hrs 400 hrs

BPS-TZ-327 12µ, with clear .0005 min Dull Gold 120 hrs 500 hrs 9B Yellow Tin Zinc protective coating AVK SPEC ESP-P-007 (9B) .0005 min Dull Gold 120 hrs 500 hrs

ESP-P-004 8µ, with clear 4 Tin Zinc Trivalent .0003 min Silver 120 hrs 500 - 800 hrs 9T* protective coating ALOG 1 AT CATALOG 14 C CATALOG BPS-TZ-427 8µ, with clear Zinc Nickel .0003 min Silver 240 hrs 1000 hrs 10 protective coating

Note 1: All of these finishes may be applied to any of the products listed at the top of the above chart. Note 2: *These finishes minus the clear protective coating can be applied to our AT and AW series products. Note 3: AVK reserves the right to substitute Trivalent ("T") finishes as an alternative on orders placed under non ROHS compliant platings. Example: ALS9T-420-165 may substitute ALS9-420-165 Note 4: All Trivalent plating meets or exceeds Hexavalent plating requirements.

® © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. AVK is a registered trademark Subject to CatalogP: 1- Terms800 and- Conditions265-877 of Use 2available F: at1- Spaenaur.com888-252-638 and on page TC20 and ww TC3 wat the. back of this catalog. .com C156 © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. of AVIBANK MFG., INC. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue. 18 Jan 2018