Finishing Systems for High Speed and Flexibility

Total Page：16

File Type：pdf, Size：1020Kb

FINISHING EQUIPMENT FINISHING SYSTEMS FOR HIGH SPEED AND FLEXIBILITY Ever since the acquisition of the JETWEB product portfolio in 2012, Contiweb offers high quality finishing systems with the Contiweb CG, Contiweb DP and PF for use in web-fed printing applications. Based on the experience with over 1.000 systems worldwide, Contiweb finishing applications stand for a concept which is technologically geared to high-speed production, quality and flexibility so that they can provide specific solutions for every application. Contiweb finishing systems are flexible and offer expand products and opportunities for web-fed presses. The Contiweb CG is a coating and gluing unit for applying aqueous coating, aqueous glue, scratch-off ink and micro- fragrances to the top side of the web (with an optional bottom-side supply). The Contiweb DP series consists of 3 different models: • DP-S: single circumference perforator and die-cutter with magnetic cylinders for die cutting and cross-running perforation in any pattern. Both die-cuts and perforations are made against a hard-chromed impression cylinder resp. blanket cylinder. • DP-D: as the DP-S but with a double circumference. • DP-C: combination of a double die-cutter and perforator where both die-cuts and perforations are made against a blanket cylinder in the lower unit and against a hard-chromed impression cylinder in the upper unit. Thanks to the position of the pairs of cylinders it is possible to work with perforating plates and die cutting plates simultaneously. The Contiweb PF is a prefolder consisting of web shifting device, folding stations with folding bars, register compensator, infeed and exit section. ADVANTAGES • More than 1.000 installations worldwide • High speed, flexibility, quality and innovation • Expand products and opportunities for web-fed presses • Specific solutions for every application • Flexible, modular systems FINISHING EQUIPMENT CONTIWEB CG CONTIWEB DP CONTIWEB PF Cut-off 452 – 630 mm Cut-off 452 – 630 mm Web width max. 1.600 mm Web width 508 – 1.460 mm Web width 508 – 1.460 mm Production speed 14 m/s Mechanical Web infeed From the bottom speed 12,1 m/s Side Mechanical speed 15 m/s Glue application 5,5 – 7 m/s Magnetic and impression Equipped with Paper 42 – 170 g/m 2 Varnish 5,5 – 7 m/s cylinder bearers application Rub-off ink 3,5 – 4,2 m/s Circumferential application (Quality depending register 360˚ on paper grade) Web travel Horizontal Side lay register perforator +/-5 mm Side lay register plate cylinder +/-5 mm Perforation Up to 10 m/s Circumferential Die cuts Up to 7 m/s register 360˚ (depending on layout and paper Plate cylinder With double lock- weight; special die up system or forms available) magnetic cylinder .

Copy Link

Recommended publications

FAQ About Recycling Cartons
FREQUENTLY ASKED QUESTIONS ABOUT CARTONS WHAT IS A CARTON? » Cartons are a type of packaging for food and beverage products you can purchase at the store. They are easy to recognize and are available in two types—shelf-stable and refrigerated. Shelf-stable cartons (types of products) Refrigerated (types of products) » Juice » Milk » Milk » Juice » Soy Milk » Cream » Soup and broth » Egg substitutes » Wine You will find these You will find these products in the chilled products on the shelves sections of grocery stores. in grocery stores. WHAT ARE CARTONS MADE FROM? » Cartons are mainly made from paper in the form of paperboard, as well as thin layers of polyethylene (plastic) and/or aluminum. Shelf-stable cartons contain on average 74% paper, 22% polyethylene and 4% aluminum. Refrigerated cartons contain about 80% paper and 20% polyethylene. ARE CARTONS RECYCLABLE? » Yes! Cartons are recyclable. In fact, the paper fiber contained in cartons is extremely valuable and useful to make new products. WHERE CAN I RECYCLE CARTONS? » To learn if your community accepts cartons for recycling, please visit RecycleCartons.com or check with your local recycling program. HOW DO I RECYCLE CARTONS? » Simply place the cartons in your recycle bin. If your recycling program collects materials as “single- stream,” you may place your cartons in your bin with all the other recyclables. If your recycling program collects materials as “dual-stream” (paper items together and plastic, metal and glass together), please place cartons with your plastic, metal and glass containers. WAIT, YOU JUST SAID CARTONS ARE MADE MAINLY FROM PAPER. Don’t I WANT TO PUT THEM WITH OTHER PAPER RECYCLABLES? » Good question.
[Show full text]
Different Perspectives for Assigning Weights to Determinants of Health
COUNTY HEALTH RANKINGS WORKING PAPER DIFFERENT PERSPECTIVES FOR ASSIGNING WEIGHTS TO DETERMINANTS OF HEALTH Bridget C. Booske Jessica K. Athens David A. Kindig Hyojun Park Patrick L. Remington FEBRUARY 2010 Table of Contents Summary .............................................................................................................................................................. 1 Historical Perspective ........................................................................................................................................ 2 Review of the Literature ................................................................................................................................... 4 Weighting Schemes Used by Other Rankings ............................................................................................... 5 Analytic Approach ............................................................................................................................................. 6 Pragmatic Approach .......................................................................................................................................... 8 References ........................................................................................................................................................... 9 Appendix 1: Weighting in Other Rankings .................................................................................................. 11 Appendix 2: Analysis of 2010 County Health Rankings Dataset ............................................................
[Show full text]
Corrugated Board Structure: a Review M.C
ISSN: 2395-3594 IJAET International Journal of Application of Engineering and Technology Vol-2 No.-3 Corrugated Board Structure: A Review M.C. Kaushal1, V.K.Sirohiya2 and R.K.Rathore3 1 2 Assistant Prof. Mechanical Engineering Department, Gwalior Institute of Information Technology,Gwalior, Assistant Prof. Mechanical Engineering 3 Departments, Gwalior Engineering College, Gwalior, M. Tech students Maharanapratap College of Technology, Gwalior, [email protected] [email protected] [email protected] ABSTRACT Corrugated board is widely used in the packing industry. The main advantages are lightness, recyclability and low cost. This makes the material the best choice to produce containers devoted to the shipping of goods. Furthermore examples of structure design based on corrugated boards can be found in different fields. Structural analysis of paperboard components is a crucial topic in the design of containers. It is required to investigate their strength properties because they have to protect the goods contained from lateral crushing and compression loads due to stacking. However in this paper complete and detailed information are presented. Keywords: - corrugated boards, recyclability, compression loads. Smaller flutes offer printability advantages as well as I. INTRODUCTION structural advantages for retail packaging. Corrugated board is essentially a paper sandwich consisting of corrugated medium layered between inside II. HISTORY and outside linerboard. On the production side, corrugated In 1856 the first known corrugated material was patented is a sub-category of the paperboard industry, which is a for sweatband lining in top hats. During the following four sub-category of the paper industry, which is a sub-category decades other forms of corrugated material were used as of the forest products industry.
[Show full text]
Tyvek Graphics Technical Data Sheet
DuPont ™ Tyvek ® for Graphics DURABLE – ECO-FRIENDLY – RECYCLABLE Available in sheets or rolls; usable for nearly all print technolo gies DuPont Tyvek a is a tough, durable, eco-friendly and 100% recyclable material available in sheets and rolls for all print technologies. DuPont Tyvek ® products are used for long-lasting signs, banners, ﬂags, displays, visual merchandising, map and book printing, packaging, credit card sleeves, envelopes, shopping bags, wallets, wall coverings, drapery, and promotional apparel. Tyvek ® is also gaining use as a template material for signs because it is lightweight, durable, and is unaffected by moisture. Conventional laser printing is not recommended on Tyvek ® because of the temperatures involved in the printing units. For the same reason, Tyvek ® should not be used in electrostatic copiers. PRODUCT TYPE OF PRINTING USED FOR COATED MILS OZ. [GSM] CORE NOTES IDEAL USES STOCK WIDTHS Black Tyvek Flexography, Gravure, Offset Uncoated 5 mil 1.25 oz 2” Paper-like. Banners & Signs 36", 45" Lithography, Screen Process, UV-cure [42 gsm] Hard Structure Custom sizes available Inkjet (w/ testing due to lighter weight) Available in 10-yard rolls 1085D Digital on Demand, Flexography, Uncoated 10.3 mil 3.2 oz 3” Paper-like. Banners & Signs. Extra body 48.25", 57.125", 114.25" Gravure, Offset Lithography, Screen [109 gsm] Hard Structure for shape development. Custom sizes available Process, UV-cure Inkjet Available in 10-yard rolls 1079 Digital on Demand, Flexography, Uncoated 7.9 mil 2.85 oz 3” Paper-like. Tags & Labels 48" Gravure, Offset Lithography, Screen [97 gsm] Hard Structure Custom sizes available Process, Thermal Transfer, UV-cure Available in 10-yard rolls Inkjet 1073D Digital on Demand, Flexography, Uncoated 7.5 mil 2.2 oz 3” Paper-like.
[Show full text]
Qualification of Test Method for Package Perforation Evaluation
Rochester Institute of Technology RIT Scholar Works Theses 4-8-2016 Qualification of estT Method for Package Perforation Evaluation Di Wang Follow this and additional works at: https://scholarworks.rit.edu/theses Recommended Citation Wang, Di, "Qualification of estT Method for Package Perforation Evaluation" (2016). Thesis. Rochester Institute of Technology. Accessed from This Thesis is brought to you for free and open access by RIT Scholar Works. It has been accepted for inclusion in Theses by an authorized administrator of RIT Scholar Works. For more information, please contact [email protected]. Qualification of Test Method for Package Perforation Evaluation By DI WANG A Thesis Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Science in Packaging Science Department of Packaging Science College of Applied Science and Technology Rochester Institute of Technology Date of Submission: 04/08/2016 Committee Approval: Deanna Jacobs Date Thesis Advisor Changfeng Ge Date Thesis Advisor Kathy Myers Date Committee Member Carol Herring Date Committee Member Abstract The purpose of this paper was to develop a new test method for packaging perforation evaluation to replace the current test method due to the human variables during test and the inconsistency of test results. First, an end user survey was conducted to find out a typical opening pattern which was used by most of the consumers when opening the packaging perforation. Second, the typical opening pattern was further analyzed by an experiment. The opening process was recorded as videos and the relationship between displacement and time was analyzed in Matlab. It was found that the opening process of typical opening pattern was consist of horizontal direction movement and vertical direction movement.
[Show full text]
Label Liners: Meeting the Sustainability Challenge
Label liners: meeting the sustainability challenge By Mariya Nedelcheva, Product Manager Film & With ever-greater emphasis placed on packaging and waste reduction, Jenny Wassenaar, Compliance & Sustainability brand owners are looking for solutions that secure their sustainability Director, Avery Dennison credentials. Consumers pay particularly close attention to packaging, where there are significant environmental gains to be made. For example, waste from labelling can create useful by-products and circular economies. Waste is not always visible on the final packaging, but its impact on brand reputation is no less real. Consumers’ perceptions of a brand can be enhanced when sustainability is improved. label.averydennison.com Matrix Liner Final White paper waste waste label 16% 35% 37% Start-up waste plus Challenge printed End-user The challenge of recycling waste from the labelling process in error scrap - and ideally creating useful by-products - is complex. Many 10% 1% different elements must be addressed in order to move towards the ultimate goal of zero waste. For example, the word ‘recyclable’ can mean many things, and should not be viewed in isolation. Today there is a chance that recyclable products will still end up in landfill, so what matters is establishing genuinely viable end-to-end recycling solutions. That means considering every component within packaging, including where it comes from, how much material has been used, and what happens at every stage of the package’s journey through the value chain. This paper discusses how the sustainability of labelling laminates can be improved, with a particular focus on the label release liners that are left behind once labels have been dispensed.
[Show full text]
U.S. Postal Service Mail Addressing Guidelines
U.S. Postal Service Mail Addressing Guidelines Address Placement Placement of the address on the face of an envelope should conform to the following U. S. Postal Service specifications. • The address should be in an area, one inch from each side of the envelope. • The top of the address should be no more than 2 3/4 inches from the bottom of the envelope and the bottom no more than 5/8's of an inch from the bottom of the envelope. • The area 4 1/2 inches by 5/8 's of an inch in the lower right hand corner of the envelope MUST remain empty for bar code placement for any maul that is processed by the Mail Center. Enclosures Correspondence Mail of any kind for transport by the U. S. Postal Service must be enclosed in an appropriate envelope or parcel and sealed. The type of enclosures determine the mailing classification. Non-mailables Several items are listed by the U. S. Postal Service as non-mailable in envelopes: • paper clips • metal pieces • glass, chips • sand. These can jam or damage the mailing machines and can cause serious injury to Mail Center and Postal employees. The following are also classified as non-mailables and subject to return to sender: envelopes and cards less than 3 1/2 inches in height or 5 inches in length. It is recommended that when mailing questionable items to U. S. or foreign destinations, the mailer should contact the Mail Center for assistance. All foreign countries also impose various restrictions. Brochures, letters and newsletters being mailed without an envelope must be folded consistently and must be tabbed with the recommended number of tabs.
[Show full text]
Estimation of the Compressive Strength of Corrugated Cardboard Boxes with Various Perforations
energies Article Estimation of the Compressive Strength of Corrugated Cardboard Boxes with Various Perforations Tomasz Garbowski 1 , Tomasz Gajewski 2 and Jakub Krzysztof Grabski 3,* 1 Department of Biosystems Engineering, Poznan University of Life Sciences, Wojska Polskiego 50, 60-627 Poznań,Poland; [email protected] 2 Institute of Structural Analysis, Poznan University of Technology, Piotrowo Street 5, 60-965 Poznań,Poland; [email protected] 3 Institute of Applied Mechanics, Poznan University of Technology, Jana Pawła II Street 24, 60-965 Poznań,Poland * Correspondence: [email protected] Abstract: This paper presents a modified analytical formula for estimating the static top-to-bottom compressive strength of corrugated board packaging with different perforations. The analytical framework is based here on Heimerl’s assumption with an extension from a single panel to a full box, enhanced with a numerically calculated critical load. In the proposed method, the torsional and shear stiffness of corrugated cardboard, as well as the panel depth-to-width ratio is implemented in the finite element model used for buckling analysis. The new approach is compared with the successful though the simplified McKee formula and is also verified with the experimental results of various packaging designs made of corrugated cardboard. The obtained results indicate that for boxes containing specific perforations, simplified methods give much larger estimation error than the analytical– numerical approach proposed in the article. To the best knowledge of the authors, the influence of the perforations has never been considered before in the analytical or analytical–numerical approach for estimation of the compressive strength of boxes made of corrugated paperboard.
[Show full text]
The HP Molded Fiber Advanced Tooling Solution White Paper | the HP Molded Fiber Advanced Tooling Solution
White paper The HP Molded Fiber Advanced Tooling Solution White paper | The HP Molded Fiber Advanced Tooling Solution Macrotrends driving the packaging market The packaging market is transitioning from foam/plastic to molded fiber (also known as molded pulp) packaging for sustainability reasons, with environmental packaging (i.e., replacing foam with paper) favoring the growth of this segment. The molded fiber packaging market is a worldwide industry, valued at $8 billion, and is the fastest-growing segment in the packaging market, with growth being fueled by growing consumer demand for sustainable and environmentally friendly packaging solutions, as well as the increase in take-out food and e-commerce.1 Asia-Pacific countries (APAC) are the biggest geographical market, especially China, Hong Kong, and Taiwan. The region is experiencing the highest growth and is expected to be the largest market by 2024. This growth can be attributed to the rising importance of disposable packaging,2 as well as the lower cost of tooling production in these areas, which presents a significant price advantage over other regions. The primary segments currently are food and beverage and electronics, which are estimated to have the highest growth. The increasing use of molded pulp products for the packaging of various electronic products (including mobile phones and accessories, computers, printers, modems, trimmers, and projectors, among others) due to its convenience, improved sustainability, and low cost are some of the factors contributing to the growth of this segment.2 Molded fiber manufacturing The thermoformed tooling segment is expected to outgrow other segments, propelled by increased consumer demand for high-quality molded fiber packaging and ongoing innovation driving down thermoforming-packaging manufacturing costs.
[Show full text]
Dupont™ Tyvek® Water-Resistive Barriers Installation Guidelines
DuPont™ Tyvek® Water-Resistive Barriers Installation Guidelines HELPING YOU GET THE JOB DONE RIGHT VERSION 2 Table of Contents Applicable Products ..................................................................................................................................................................2 Recommended Materials .........................................................................................................................................................2 Code Requirements ..................................................................................................................................................................3 General Instructions .................................................................................................................................................................3 Special Considerations .............................................................................................................................................................3 Installation Instructions .............................................................................................................................................................4 Continuity Terminations ........................................................................................................................................................................6 Gable Ends ...........................................................................................................................................................................6
[Show full text]
Pfass and Alternatives in Food Packaging (Paper and Paperboard): Report on the Commercial Availability and Current Uses
PFASs and alternatives in food packaging (paper and paperboard): Report on the commercial availability and current uses Series on Risk Management No. 58 1 Series on Risk Management 0 No. 58 PFASs and Alternatives in Food Packaging (Paper and Paperboard) Report on the Commercial Availability and Current Uses PUBE Please cite this publication as: OECD (2020), PFASs and Alternatives in Food Packaging (Paper and Paperboard) Report on the Commercial Availability and Current Uses, OECD Series on Risk Management, No. 58, Environment, Health and Safety, Environment Directorate, OECD. Acknowledgements: The OECD would like to acknowledge the drafting of a consultancy report by Steve Hollins of Exponent International Ltd. upon which this report is based. It was prepared under the framework of the OECD/UNEP Global PFC Group and included the contribution of information by several organisations (see Annex A). The report is published under the responsibility of the OECD Joint Meeting of the Chemicals Committee and the Working Party on Chemicals, Pesticides and Biotechnology. © Photo credits: Cover: Yuriy Golub/Shutterstock.com © OECD 2020 Applications for permission to reproduce or translate all or part of this material should be made to: Head of Publications Service, [email protected], OECD, 2 rue André-Pascal, 75775 Paris Cedex 16, France ABOUT THE OECD 3 About the OECD The Organisation for Economic Co-operation and Development (OECD) is an intergovernmental organisation in which representatives of 36 industrialised countries in North and South America, Europe and the Asia and Pacific region, as well as the European Commission, meet to co-ordinate and harmonise policies, discuss issues of mutual concern, and work together to respond to international problems.
[Show full text]
Envelopes and Paper Sizes Envelopes
Envelopes and Paper Sizes Envelopes #10 Envelope - 4.125 x 9.5 inches. Standard envelope for a folded letter size paper to fit. #10 Window Envelope - Standard envelope for a folded letter size paper to fit with front window to allow a mailing address to show. 9 x 12 - Fits an unfolded letter size paper. 10 x 13 - Fits letter size paper or a 9 x 12 folder. Both envelopes are brown in color and open at the short end. Paper Sizes 8.5 x 11 Letter - Smallest page size we print on. If we are printing smaller items, they are printed in multiples on a larger sheet. 8.5 x 11 Legal - Slightly longer than a letter paper. Used commonly for exams and legal documents. 11 x 17 Tabloid - Equivalent of two 8.5 x 11 letter paper side by side. Used commonly for posters and 4 page folded documents. Some posters are not printed on this size since they require an image edge to edge (*bleed). 12 x 18 - One inch larger on both sides than 11x17. This is the paper that some posters are printed on and then trimmed to size to allow for bleed. 14 x 20 - We can print this size paper on our high volume printer. It is not a standard size paper, but allows for us to print at a slightly larger size. Larger than 14 x 20 would be printed on our large format printer. Anything larger than a 12 x 18 page cannot be printed by our front desk staff and needs to go to our designer so it can be printed on the appropriate device.
[Show full text]