3-In-1 Heater - Humidifier - Air Cleaner Instruction Manual Model No

3-in-1 Heater - Humidifier - Air Cleaner Instruction Manual Model No. CZHHAP CZHHAPCN

IMPORTANT Read this manual carefully before using or servicing this unit. Keep this instruction manual for future reference. If you have questions about the use, operation servicing or repair please call Comfort Zone® 800-523-1268.

PLEASE READ MANUAL CAREFULLY BEFORE RUNNING THIS HEATER AND SAVE IT FOR FUTURE REFERENCE Model No. CZHHAP

Safety Warnings ...... 2-3 Technical Specifications ...... 4 Parts and Features ...... 5 Safety Features ...... 6 Operate Your Heater ...... 7-8 Care and Cleaning ...... 9-10 Troubleshooting ...... 11-12 able of C ontents

T Warranty ...... 12

This manual contains important information about the Extra safety precautions are essential when using assembly, operation and maintenance of this indoor any type of heater These precautions are required appliance. General safety information is presented when using, storing and servicing. Using this throughout this manual. Please read it thoroughly and equipment with the caution and respect that this carefully. Particular attention should be paid to the product demands will reduce the possibilities of information accompanied by safety alert symbols: personal injuries or property damage.

arnings ! DANGER, ! WARNING, ! CAUTION The symbols shown below are used often throughout Save this manual for future reference and to educate these instructions. Always follow the precautions new users of this product. This instruction manual as they are essential for the safe operation of this should be read in conjunction with the labeling on the device. product. S afety W ! DANGER ! CAUTION

DANGER indicates an imminently hazardous CAUTION indicates a potentially hazardous situation which, if not avoided, will result in death situation which, if not avoided, may result in minor or serious injury. or moderate personal injury, or property damage.

! WARNING ! DANGER

WARNING indicates a potentially hazardous Failure to comply with all precautions and situation which, if not avoided, could result in instructions provided with this appliance can death or serious injury. result in death, serious bodily injury and property loss or damage. Only persons who can understand and follow these instructions should use or service this appliance. If you need assistance or information such as an instruction manual or safety labels, contact Comfort Zone®.

2 Model No. CZHHAP

IMPORTANT INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions before using this appliance. • Do not run power cord under carpeting. Do not cover safety warnings • Use only for intended household use as described in cord with throw rugs, runners or similar coverings. Do not this manual. Any other use not recommended by the route cord under furniture or appliances. Arrange cord manufacturer may cause fire, electric shock, or injury to away from traffic area where it will not be tripped over. persons. The use of attachments not recommended or • Check your appliance cord and plug connections. sold by unauthorized dealers may cause hazards. 1. Faulty wall outlet connections or loose plugs can • This heater is hot when in use. To avoid burns, Keep cause the outlet or plug to overheat. Be sure the plug combustible materials, such as furniture, pillows, fits tight in to the outlet. bedding, paper, clothes, and curtains at least 3 ft. from 2. Heaters draw more current than small other the front of the heater and keep them away from the appliances. Overheating of the outlet may occur sides, top, and rear when the heater is plugged in. even if it has not occurred with the use of other small • Extreme caution should be taken when using any appliances. appliance around children, elderly, disabled persons 3. During use, check frequently to determine if your plug or whenever the heater is left operating unattended. outlet or faceplate is HOT! Children under 14 years of age should not be allowed to 4. If so, discontinue use of the unit and have a qualified operate this heater. This product is for adult use only and electrician check and/or replace faulty outlet. all children must be supervised when using or near this product. • Do not locate unit against walls or behind drapes or furniture. • Always unplug the appliance when not in use or before moving or cleaning it. • DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an • Do not operate the appliance with a damaged cord or electric shock or fire, or damage the appliance. plug, after the unit malfunctions, or if the unit has been dropped or damaged in any manner. Discard unit or • To prevent a possible fire, DO NOT block the air intakes return to a qualified service dealer for examination and/ or exhaust in any manner. DO NOT use on soft surfaces, or repair. like a bed, where openings may become blocked. • DO NOT use outdoors. • A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, explosive and/or • This appliance is not intended for use in bathrooms, flammable liquids are used or stored. laundry areas and similar indoor locations. NEVER locate the unit where it may fall into a bathtub or other water • Use this appliance only as described in this manual. Any container. To protect against electrical hazards, DO NOT use not recommended by the manufacturer may cause immerse in water or other liquids. fire, electric shock or injury to persons. • To disconnect heater, turn controls to OFF, wait for heater • Do not use an extension cord or relocatable power tap to cool down and shut off. After shut-down, remove plug (outlet/power strip) because the it may overheat and from outlet. Pull firmly on the plug, DO NOT unplug by cause a risk of fire. To avoid fire or shock hazard, plug pulling on the cord. the unit directly into a 120V AC electrical outlet. • Connect to properly grounded outlets only. Do not modify • To prevent overload and blown fuses, be sure that no the plug provided. If plug will not in the outlet, have a other appliance is plugged into an outlet on the same proper outlet installed by a qualified electrician. circuit. • Be sure the plug is fully inserted into an appropriate • Do not cover the unit while it is functioning in order to receptacle. Please remember that receptacles also avoid overheating and/or risk of fire. deteriorate due to aging and continuous use: check • Do not place the unit near a bed because objects such outlet and cord periodically for signs of overheating as pillows or blankets can fall off the bed and be ignited or deformations of the plug. If any overheating or by the heater. deformation is present, immediately discontinue using • Clean the outer air filter in the rear of the heater every 30 the receptacle and contact a qualified electrician. days by vacuuming it and/or washing it to remove dust • It is normal for the appliance's plug and cord to feel warm particles. Be certain to dry the filter completely prior to to the touch. A plug or cord which becomes hot to the re-inserting in to its position on the heater and prior to touch or becomes distorted in shape may be a result re-starting the heater. of a worn electrical outlet (receptacle). Worn outlets • Keep your appliance original packaging. It is required or receptacles should be replaced prior to further use in case you need to return the unit and for off-season of the heater. Plugging this heater in to a worn outlet storage and for any transportation needs. (receptacle) may result in overheating of the power cord • PET OWNERS NOTE: The health of birds and some small or fire. pets are extremely sensitive to the fumes given off during • DO NOT attempt to repair or adjust any electrical or the initial use of many appliances. Although these fumes mechanical functions on this unit. Doing so will void are not harmful to humans, it is recommended that this your warranty. The inside of the unit contains no user heater not be used around birds and small pets during serviceable parts. Qualified personnel should perform all its initial use until the manufacturing corrosion coatings servicing only. burn off. • Always use on a dry, level surface. Use on floor only. • SAVE THESE INSTRUCTIONS. • Do not operate this heater unattended or while sleeping. 3 Model No. CZHHAP

Model: CZHHAP Output: (Max Power)1500 Watts (5120 BTU's) (Med. Power)1000 Watts (3412 BTU's) (Low Power) 500 Watts (1706 BTU's) Power: 120 Volts AC, 60 Hz - 12.5 AMPS Heating Element: PTC Ceramic Thermostat Range: 60° - 90° F. (15° - 32° C.) Humidifier: Ultrasonic Cool Mist, filterless Capacity: 1.1 Liters (0.29 Gal.) Remote Battery: 1ea. CR2025 3V Object Clearance: 3 feet (0.9 Meters) from front, sides and rear TECHNICAL SPECIFICATIONS

Fig. 1 Fig. 2

Reservoir Compartment Room Temperature Sensor Master Power Switch

Control Panel PARTS and features PARTS

Air Output Vent

Humidifier Mist Vent Air Intake Power Cord Holder Filter Cover 4 4 Model No. CZHHAP

LCD CONTROL PANEL

Model: CZHHAP parts and features Output: (Max Power)1500 Watts (5120 BTU's) Fig. 3 14 13 11 12 (Med. Power)1000 Watts (3412 BTU's) (Low Power) 500 Watts (1706 BTU's) ° Power: 120 Volts AC, 60 Hz - 12.5 AMPS °F F Heating Element: PTC Ceramic 8 LOW POWER Thermostat Range: 60° - 90° F. (15° - 32° C.) HUMIDIFIER Humidifier: Ultrasonic Cool Mist, filterless ACTUAL HEATING UP Capacity: 1.1 Liters (0.29 Gal.) MED POWER Remote Battery: 1ea. CR2025 3V 10 PURIFIER TEMPERATURE COOLING DOWN Object Clearance: 3 feet (0.9 Meters) from front, sides and rear h MAX POWER 9 ADD WATER HIGH LOW DELAY TIMER 16 TEMP 15 1 RS POWER HEATER ROOM FAN HUMIDIFIER DELAY UP DOWN SETTING TIMER 2 3 4 5 6 7

1 Power ON/OFF: Press to turn the unit power on or off Fig. 3A 2 1 2 Heater ON/OFF: Press to turn heater function on or off Press to set room for maximum efficiency Max Power for large room (1500 Watts) 3 Room Setting: Med Power for medium room (1000 Watts) 4 Low Power for small size room (500 Watts) FAN POWER 4 Fan Adjust: Press to set fan speed from low to high Humidifier ON/Off: Press to turn humidifier function on or off 5 HEATER 6 Delay Timer Setting: Press to turn on and set countdown timer's time value 3 5 Press corresponding button to raise or lower the 7 Temp Up/Down: ROOM HUMIDIFIER temperature SETTING 8 Humidifier Indicator: Shows the humidifier function is operating 6 DELAY 9 Add Water Indicator: Illuminates when humidifier requires water TIMER 10 Air Cleaner Indicator: Illuminates showing the air cleaner is operating

11 Heating Up Indicator: Illuminates when the heating elements are warming up UP DOWN

12 Cooling Down Indicator: Illuminates when the heating elements are cooling down TEMP 13 Target Temp. Indicator: Shows set temperature 7 Shows approximate room temperature at sensor on rear Actual Temperature: 14 of heater 15 Delay Timer Indicator: Shows time value of delay timer 16 Fan Speed Indicator: Shows chosen fan speed

REMOTE CONTROL This heater is equipped with a full function remote control. Use the remote control just as you would use the buttons on the control panel. Simply aim the remote control towards the power button of the control panel. 5 Model No. CZHHAP

Remote Control (Cont.) When using remote control, please pull out the clear insulating film to activate the battery as shown below. The remote control uses 1 ea. CR2025. 3V battery.

Remote Control Clear Insulating Film Battery Cover and features parts

Overheat Safety Feature This heater is equipped with an overheat safety feature. When the heater’s internal components reach a certain temperature that could cause overheating and possible fire, the heater will automatically shut off. To reset, turn the master power switch on the rear of the unit to off position. Unplug the heater and let it cool down for 20 minutes. Plug the heater back into the wall outlet and restart the heater. Tip-Over Safety Feature This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the unit off. Once the unit is restored to an upright position it will reset. Restart the heater.

Grounded Cordset This appliance has a three prong grounded plug that must be inserted into a matching properly grounded outlet to reduce the risk of electrical shock. Do not attempt to defeat this safety feature. If the plug does not fit contact a qualified electrician. Never use with an extension cord or relocatable power tap (outlet/power strip).

! WARNING SAFETY FEATURES WARNING: This heater has a voltage rating of 120 volts. The cord has a plug as shown in (A). An adapter as shown in (C) is available for connecting three-blade grounding-type plugs to two-slot receptacles (B). The grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.

DO NOT DEFEAT THE SAFETY PURPOSE OF THE GROUNDED PLUG.

WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet and the plug may cause overheating of the plug. If the plug is loose, do not use this outlet. If the plug is loose, try inserting the plug into a different outlet. Contact a qualified electrician to inspect the original outlet. 6 Model No. CZHHAP

Fig. 4 How to Operate your Heater ° Unpack and prepare your unit F Note: Upon first use, this heater may emit a slight ACTUAL

smoke odor. This smoke odor is a normal condition O perateH eater your of the initial use of the PTC element. It will occur only PURIFIER TEMPERATURE briefly and is not harmful. 1. Remove product from packaging by opening the unit from the top. Fold top box flaps and gently turn the HIGH

box over till upside-down. Lift box from styrofoam TEMP packaging. Remove styrofoam and turn heater upright. Keep packaging for off-season storage and RS

any transportation requirements. POWER HEATER ROOM FAN HUMIDIFIER DELAY UP DOWN 2. Place heater on a stable, unobstructed location. SETTING TIMER 3. Plug the power cord directly into an unused grounded 120V AC, 15A or higher circuit receptacle. 4. Turn master control switch (located on the back of Fig. 5 the heater) to ON position. The switch will illuminate. ° ° 5. Power the heater on using the control panel or F F remote control. The base default setting for this heater is the Air Cleaner mode. The air cleaner will ACTUAL HEATING UP work to purify the room. The control panel will show PURIFIER TEMPERATURE the room temperature. See Fig. 4 MAX POWER

Turn Heater ON/OFF HIGH

With unit plugged in and powered on, press the TEMP HEATER power button to turn the heater function on or off. The heater fan will not operate until the element RS has warmed up enough to generate heat. An indicator POWER HEATER ROOM FAN HUMIDIFIER DELAY UP DOWN "HEATING UP" will illuminate on the control panel. SETTING TIMER See Fig. 5

When the user presses the HEATER button on the Fig. 6 control panel, if the actual room temperature is higher ° ° than the default setting of 70° F (21° C.) or the user F F set temperature, the heater will not start heating at this time and simply maintain the set temperature when ACTUAL the actual temperature falls below the set temperature. PURIFIER TEMPERATURE See Fig. 6 MAX POWER

Room Setting HIGH Press ROOM SETTING button on control panel to TEMP adjust the power level based on room size. This RS heater has 3 power settings and can be used for POWER HEATER ROOM FAN HUMIDIFIER DELAY UP DOWN Small, Medium and Large sized rooms. LOW POWER SETTING TIMER for Small room - 500 Watts, MED POWER for Medium room - 1000 Watts, MAX POWER for Large room - 1500 Watts. Fig. 7 ° Temperature Setting °F F Press TEMP UP or TEMP DOWN to set the desired HUMIDIFIER temperature. The temperature range is 60° - 90° F ACTUAL HEATING UP MED POWER (15° - 32° C). The default setting is 70° F (21° C) when TEMPERATURE initially powered up. See Fig. 7 PURIFIER

The unit will remember the last setting if simply ADD WATER HIGH powered off on the control panel. To change from TEMP Fahrenheit (F.) scale to Celsius (C.) press and hold TEMP UP and TEMP DOWN at the same time while the RS unit is running in any mode. POWER HEATER ROOM FAN HUMIDIFIER DELAY UP DOWN SETTING TIMER 7 Model No. CZHHAP

Fig. 8 Humidifier Setting ° ° CAUTION: Do not attempt to run humidifier without F F water as this will damage the unit and void your HUMIDIFIER warranty. Before setting/turning ON humidifier function, ACTUAL HEATING UP MED POWER make sure water tank is full. See "How to Fill the TEMPERATURE PURIFIER Humidifier" section. Press the HUMIDIFIER button to turn on/off the humidifier. Press the humidifier button

our H eater once to start this function and produce humidity mist. If ADD WATER HIGH left on, it will run till empty. When empty and requiring TEMP water in the bottle, you will hear an audible tone from the unit and the ADD WATER indicator will illuminate. RS See Fig. 8. Press the HUMIDIFIER button again to turn POWER HEATER ROOM FAN HUMIDIFIER DELAY UP DOWN the function off. SETTING TIMER

Note: If you do not plan to use the humidifier for a long Y O perate period of time, empty the water bottle and dry out the reservoir to avoid mold build-up Fig. 9 ° Delay Timer Setting °F F Press DELAY TIMER button to set the desired amount HUMIDIFIER of time (in hours up to 23) for the unit to run before the it turns itself off. Do not leave heater unattended. ACTUAL MED POWER See Fig. 9. This feature works while the unit is in any PURIFIER TEMPERATURE mode. To cancel the delay timer setting, simply press the DELAY TIMER button repeatedly until it cycles h through the time choices and the time value on the ADD WATER HIGH DELAY TIMER control panel is gone. TEMP RS

Fan Adjust POWER HEATER ROOM FAN HUMIDIFIER DELAY UP DOWN Press the FAN button to change fan speed from LOW SETTING TIMER to HIGH or from HIGH to LOW.

Turn OFF Heater Press the POWER button on control panel to turn off all functions. Please note; when powering down the heater, the fan will continue to run for up to 3 minutes to remove any residual heat built up inside the heater and to cool down the element. You will see "COOLING DOWN" indicator illuminated on the control panel. The fan will turn off by itself. Please leave master power switch located on the back of the unit ON during this process.

Overheat Safety Feature This heater is equipped with an overheat safety feature. When the heater’s internal components reach a certain temperature that could cause overheating and possible fire, the heater will automatically shut off and an indicator light will illuminate next to the power button on the control panel. To reset, turn the master power switch on the rear of the unit to off position. Unplug the heater and let it cool down for 20 minutes. Plug the heater back into the wall outlet and restart the heater.

Tip-Over Safety Feature This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the unit off. Once the unit is restored to an upright position it will reset. Restart the heater.

8 Care and cleaning 9 CAUTION ! See Fig. 11. filter cover in place. See Fig. holding rear activated foam and honeycomb remove Carefully See Fig.12. filter. Run the dust. or run warm water over it to remove of the air flow until the water in the opposite direction water runs clear. residue, be cautious not to drip on any filtered can stainable surfaces such as carpeting. You also soak the filter in water mixed with a small to rinse out filters amount of mild dish soap. Be sure completely. Clean the air cleaner filter every 30 days or when the to maintain performance.filter appears dirty in order and allow it to drip dry allowing completely removed filter back into reinstalling up to 24 hours before the filter to dry using any Do not force the heater. alternative methods. the cover back in place. CAUTION: Disconnect power before servicing. CAUTION: Disconnect power before DO NOT USE VINEGAR TO CLEAN THIS HUMIDIFIER. DO NOT USE VINEGAR TO CLEAN for a long period If you do not plan to use the humidifier dryof time, empty the water bottle and out the reservoir Do completely dry. to avoid mold build-up. Allow unit to water as this not attempt to run the humidifier without will damage the unit and void the warranty. to Clean the Air Cleaner How heater comes with a PCO (Photo-Catalytic Your high-intensity UV Oxidation) air cleaner that combines honeycomb filter light with superior activated carbon technology. to be cleaned on The lifetime washable air filter needs maximum performance basis to ensure of a regular clean the air the air cleaner and of the heater itself. To these simple steps: follow cleaner filter, two screws 1. Remove filter cover by unscrewing 2. Clean the filter by vacuuming it with an attachment some the filter may excrete 3. During this process, 4. 5. Shake the filter over a sink until excess water is rear of the unit and screw 6. Reinstall the filter in to the CARE AND CLEANING Humidifier to Clean your How How to Fill the Humidifier to Fill the Humidifier How reservoir compartment bottle and The humidifier water on the top of the unit. located under the door are the bottle simply pull the water refill 10. To See Fig. fill cap. For best results, Unscrew bottle out of the unit. water to avoid mineral build water bottle with distilled place water cap and carefully up in the unit. Tighten cap side down. Do not reservoir, bottle back in to the humidifier without water as this will attempt to run the void the warranty. damage the unit and plan to use the humidifier for a long Note: If you do not the water bottle and dryperiod of time, empty out the to avoid mold build-up. reservoir Fig. 10B Fig. Fig. 10A Fig. Model No. CZHHAP Model No. Fig. 12 Fig. Fig. 11 Fig. Fig. 10 Fig. Model No. CZHHAP

! CAUTION

CAUTION: Disconnect power before servicing.

Care and Cleaning Tips • Ensure that the heater is turned off, the master switch located on the back of the heater should be in the off position. Unplug the power cord from the wall outlet before cleaning. • Carefully wipe the exterior of the heater with a soft, damp (not wet) cloth and dry thoroughly with a soft dry cloth. • Over time, dust may accumulate on the output vent of the heater. This can be removed by wiping with a damp cloth or carefully cleaning using a vacuum cleaner with a brush attachment. • Do not use harsh or abrasive cleaners to clean your heater, these will damage the surface. • Clean the filter on the back of the heater every 30 days or when dirty to maintain performance. • Do not run the humidifier without water. This will void the warranty.

care and cleaning ! WARNING ! WARNING

WARNING: Any other service should be WARNING: The manufacturer shall not be liable in performed by a certified electrician specialist or the event that the instructions in this manual are by an authorized service representative. not observed and followed. Cautions and Reminders • The heater grill is hot when in use. To avoid burns, do not let bare skin touch the hot surface. Keep combustible materials such as pillows, bedding, papers, clothes and curtains at least three feet (0.9 meters) from the front of the heater and keep them away from the sides and rear. • Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended. • To disconnect the heater, turn power off, allow the heater to cool down and fan to stop. Turn master power switch to OFF position and remove plug from outlet. Always unplug the heater when not in use.

Performance Suggestions To assure maximum performance of the heater, please note the following recommendations:

1. For best results, do not locate the heater in an area with a high rate of air filtration and movement as it will effect the unit's thermostat 2. Try placing the heater near a warmer inside wall and direct the output towards a cooler outside wall. The cooler outside wall will tend to draw the generated heat towards itself, which will allow for more efficient heating. 3. Placing the heater next to a cold air return will draw the heat away from area to be heated. Try closing or covering the cold air return. This will allow for more efficient heating. Experiment with the placement of the heater to see what works best for you. 4. To ensure maximum efficiency, a 40% (minimum) relative humidity should be maintained in the heating environment. 5. This heater is designed to operate for maximum efficiency up to 80-82° F. (26.7-27.7° C.) range. Soft heat concept makes temperatures of 68° F. (20° C.) feel as though it were 72° F. (22° C.). This is due to the heat mixing with the humidity evenly for full body comfort. 6. When the heater is placed in an isolated area such as a basement or recreation area, the delivery registers and air return grills of the existing heating system should be closed during heater use in that area if possible. 7. Try placing the heater a few feet above the floor in rooms with large areas of bare concrete. Make sure the heater is secure and will not fall. This will allow for more efficient heating since concrete acts like a heat sink and will tend to draw the heat in its direction. 8. Try lowering your central heating system to a lower temperature and placing the heater in the area that you spend a majority of your time. Now set the heater to your comfort level. This will help reduce your overall energy consumption. 9. When heating larger areas, place the heater in a central location. If a ceiling fan is nearby, try using it at low speed at the same time to help distribute the heat evenly. 10. If used in an extremely dirty or dusty area, the filter must be cleaned more frequently as the filter can clog and cause the heater to stop working. Please refer to "How To Clean the Air Cleaner" section of this manual for instructions. 10 troubleshooting 11 Solution The heater fan will not work until the heating element not work until the heating element The heater fan will heat the air as it passes by is hot enough to effectively will turnthe element. The fan on automatically. continue to run for a few minutes The heater fan will and air filtration system has until the heating element automatically. fan will shut off cooled down. The air intake is not blocked and be the rear Make sure the filter is clean. Follow the filter maintenance sure to clean the filter. procedure mode. protection The heater has gone into overheat of the This happens when the internal temperature turn level. Simply the heater exceeds a pre-defined of the unit to off master power switch on the rear it cool down for 20 position. Unplug the heater and let the wall outlet and minutes. Plug the heater back into restart the heater. Please remember it takes less than an hour. Generally, many are there that with any type of heating process, insulated, size, how well the space is variables: room concrete bare how many doors/windows, how much type of heating), (which acts as a heat sink with any the outside door, the opening and closing of exterior etc. temperature, keep in mind that heating will vary based on how Yes, rooms of the open your floor plan is and the sizes ceiling fan will help involved. In some cases running a simultaneously by placing in heating multiple rooms the unit in a central room. little longer to heat the room but it will take a Yes, will also have an initially and the outside temperature has reached impact on heating time. Once the room it will cycle on and off temperature, the desired accordingly. due to the high level of No, it is NOT recommended and similar locations. in a bathroom moisture with little insulation that rooms but keep in mind Yes, concrete Bare the heat as efficiently. will not retain floors which act as a heat sink with any type of heating will absorb some of the heat. Placing the heater a few feet above the floor will allow for more heating. efficient that each heater is on make sure but you should Yes, not servicing other electrical needs. its own circuit The This heater is designed for household use only. heater was not designed to be used in high dust Using the heater for this construction environments. purpose will void the warranty. Model No. CZHHAP Model No. Question Why does the heater fan not work after I have Why does the heater turned the heater power button on the control on panel? fan continue to run after I have Why does the heater panel? on the control turned the heater off The heater's airflow seems to have diminished. by itself. The heater has shut off Once I initially plug the unit in and turn it on, how long will it take to heat my room? at the rooms Can I use the heater to heat multiple same time? My home is not insulated very well, will this heater help me? Can the heater be used in a bathroom? Will I be able to use this heater in a basement? than one heater at a time? Can I use more Can I use the heater on a job/construction site? Troubleshooting Model No. CZHHAP

Question Solution Can I use the heater and another appliance at the Yes, as long as they are not on the same circuit. Zone same time? heaters are considered an appliance. You should not run more than one large appliance on a single circuit breaker. Your freezer, refrigerator, microwave oven, washing machine, dryer and other such appliances should not share a circuit breaker. Can I use an extension cord, surge protector or It is NOT recommended. It is designed to be plugged power strip with my heater? directly in to a grounded 120V AC, 15 Amp or higher circuit receptacle.

I don't have a grounded outlet, can I use a cord NO. If you don't have a grounded outlet, contact a adapter or remove the grounding plug?

T roubleshooting licensed electrician in your area for advice. Removing or altering any part of the heater is unsafe and also will void the warranty.

Can I move the heater around while it is operating? It is NOT recommended to move any portable heater while it is operating. We recommend moving the heater only once the fan has completely turned off.

What is zone heating? Zone heating is about focusing heat where people spend a majority of time, while keeping the rest of the home cooler.

LIMITED WARRANTY Products manufactured by Comfort Zone® are warranted to the original consumer to be free of defects in material and workmanship for twelve (12) months from the original date of purchase. The warranty does not cover products modified outside our factory, damage or failure caused by acts of God, abuse, misuse, abnormal usage, faulty installation, failure to follow suggested maintenance procedures enclosed with this product (as defined by Magnuson-Moss Warranty-Federal Trade Commission Improvement Act) This unit is guaranteed to the original retail purchaser against defects in quality or workmanship for a period of one year from the date of original purchase. If this unit fails because of a manufacturing defect within 30 days of purchase, return the unit, with your receipt, to the retailer. After 30 days, but within the warranty period, if the unit was purchased within the continental united States, return it, freight prepaid, to Comfort Zone® for repair or replacement. If the unit was purchased outside the continental united States, return the unit to the place of

arranty purchase. This warranty does not cover damage caused by misuse, abuse, overheating and alteration. Repairs made by anyone other than Comfort Zone® are not covered in this warranty. Manufacturer will not be held liable for any losses W due to neglectful operation. All implied warranties, including the warranties of merchantability and of fitness of purpose, if applicable, are hereby limited in duration to the period of one year from the date of original retail purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Incidental or consequential damages arising from a breach of either express or implied warranties are hereby disclaimed and excluded. Some states do not allow the exclusion of limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you. Upon the expiration of this warranty all such liability will terminate. No other warranties are expressed or implied.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. No informal dispute settlement mechanisms are available. This limited warranty is given in lieu of all other warranties.

Manufactured for: Howard Berger Co. LLC 324A Half Acre Rd. Cranbury, NJ 08512 USA 800-221-6895 www.comfortzone-us.com