DOCSLIB.ORG

"Lessons in Electric Circuits, Volume III -- Semiconductors"

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fifth Edition, last update March 29, 2009 2 Lessons In Electric Circuits, Volume III – Semiconductors By Tony R. Kuphaldt Fifth Edition, last update March 29, 2009 i °c 2000-2015, Tony R. Kuphaldt This book is published under the terms and conditions of the Design Science License. These terms and conditions allow for free copying, distribution, and/or modification of this document by the general public. The full Design Science License text is included in the last chapter. As an open and collaboratively developed text, this book is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the Design Science License for more details. Available in its entirety as part of the Open Book Project collection at: openbookproject.net/electricCircuits PRINTING HISTORY • First Edition: Printed in June of 2000. Plain-ASCII illustrations for universal computer readability. • Second Edition: Printed in September of 2000. Illustrations reworked in standard graphic (eps and jpeg) format. Source files translated to Texinfo format for easy online and printed publication. • Third Edition: Printed in January 2002. Source files translated to SubML format. SubML is a simple markup language designed to easily convert to other markups like LATEX, HTML, or DocBook using nothing but search-and-replace substitutions. • Fourth Edition: Printed in December 2002. New sections added, and error corrections made, since third edition. • Fith Edition: Printed in July 2007. New sections added, and error corrections made, format change. ii Contents 1 AMPLIFIERS AND ACTIVE DEVICES 1 1.1 From electric to electronic ................................ 1 1.2 Active versus passive devices .............................. 3 1.3 Amplifiers ......................................... 3 1.4 Amplifier gain ....................................... 6 1.5 Decibels .......................................... 8 1.6 Absolute dB scales .................................... 14 1.7 Attenuators ........................................ 16 2 SOLID-STATE DEVICE THEORY 27 2.1 Introduction ........................................ 27 2.2 Quantum physics ..................................... 28 2.3 Valence and Crystal structure ............................. 41 2.4 Band theory of solids ................................... 47 2.5 Electrons and “holes” ................................... 50 2.6 The P-N junction ..................................... 55 2.7 Junction diodes ...................................... 58 2.8 Bipolar junction transistors ............................... 60 2.9 Junction field-effect transistors ............................. 65 2.10 Insulated-gate field-effect transistors (MOSFET) .................. 70 2.11 Thyristors ......................................... 73 2.12 Semiconductor manufacturing techniques ...................... 75 2.13 Superconducting devices ................................. 80 2.14 Quantum devices ..................................... 83 2.15 Semiconductor devices in SPICE ............................ 91 Bibliography ........................................... 93 3 DIODES AND RECTIFIERS 97 3.1 Introduction ........................................ 98 3.2 Meter check of a diode .................................. 103 3.3 Diode ratings ....................................... 107 3.4 Rectifier circuits ..................................... 108 3.5 Peak detector ....................................... 115 3.6 Clipper circuits ...................................... 117 iii iv CONTENTS 3.7 Clamper circuits ..................................... 121 3.8 Voltage multipliers .................................... 123 3.9 Inductor commutating circuits ............................. 130 3.10 Diode switching circuits ................................. 132 3.11 Zener diodes ........................................ 135 3.12 Special-purpose diodes .................................. 143 3.13 Other diode technologies ................................. 163 3.14 SPICE models ....................................... 163 Bibliography ........................................... 172 4 BIPOLAR JUNCTION TRANSISTORS 175 4.1 Introduction ........................................ 176 4.2 The transistor as a switch ................................ 178 4.3 Meter check of a transistor ............................... 181 4.4 Active mode operation .................................. 185 4.5 The common-emitter amplifier ............................. 191 4.6 The common-collector amplifier ............................. 204 4.7 The common-base amplifier ............................... 212 4.8 The cascode amplifier .................................. 220 4.9 Biasing techniques .................................... 224 4.10 Biasing calculations ................................... 237 4.11 Input and output coupling ................................ 249 4.12 Feedback .......................................... 258 4.13 Amplifier impedances .................................. 265 4.14 Current mirrors ...................................... 266 4.15 Transistor ratings and packages ............................ 271 4.16 BJT quirks ......................................... 273 Bibliography ........................................... 280 5 JUNCTION FIELD-EFFECT TRANSISTORS 283 5.1 Introduction ........................................ 283 5.2 The transistor as a switch ................................ 285 5.3 Meter check of a transistor ............................... 288 5.4 Active-mode operation .................................. 290 5.5 The common-source amplifier – PENDING ...................... 299 5.6 The common-drain amplifier – PENDING ...................... 300 5.7 The common-gate amplifier – PENDING ....................... 300 5.8 Biasing techniques – PENDING ............................ 300 5.9 Transistor ratings and packages – PENDING .................... 301 5.10 JFET quirks – PENDING ................................ 301 6 INSULATED-GATE FIELD-EFFECT TRANSISTORS 303 6.1 Introduction ........................................ 303 6.2 Depletion-type IGFETs ................................. 304 6.3 Enhancement-type IGFETs – PENDING ....................... 313 6.4 Active-mode operation – PENDING .......................... 313 CONTENTS v 6.5 The common-source amplifier – PENDING ...................... 314 6.6 The common-drain amplifier – PENDING ...................... 314 6.7 The common-gate amplifier – PENDING ....................... 314 6.8 Biasing techniques – PENDING ............................ 314 6.9 Transistor ratings and packages – PENDING .................... 314 6.10 IGFET quirks – PENDING ............................... 315 6.11 MESFETs – PENDING ................................. 315 6.12 IGBTs ........................................... 315 7 THYRISTORS 319 7.1 Hysteresis ......................................... 319 7.2 Gas discharge tubes ................................... 320 7.3 The Shockley Diode .................................... 324 7.4 The DIAC ......................................... 331 7.5 The Silicon-Controlled Rectifier (SCR) ......................... 331 7.6 The TRIAC ........................................ 343 7.7 Optothyristors ....................................... 346 7.8 The Unijunction Transistor (UJT) ........................... 346 7.9 The Silicon-Controlled Switch (SCS) .......................... 352 7.10 Field-effect-controlled thyristors ............................ 354 Bibliography ........................................... 356 8 OPERATIONAL AMPLIFIERS 357 8.1 Introduction ........................................ 357 8.2 Single-ended and differential amplifiers ........................ 358 8.3 The ”operational” amplifier ............................... 362 8.4 Negative feedback .................................... 368 8.5 Divided feedback ..................................... 371 8.6 An analogy for divided feedback ............................ 374 8.7 Voltage-to-current signal conversion .......................... 380 8.8 Averager and summer circuits ............................. 382 8.9 Building a differential amplifier ............................ 384 8.10 The instrumentation amplifier ............................. 386 8.11 Differentiator and integrator circuits ......................... 387 8.12 Positive feedback ..................................... 390 8.13 Practical considerations ................................. 394 8.14 Operational amplifier models .............................. 410 8.15 Data ............................................ 415 9 PRACTICAL ANALOG SEMICONDUCTOR CIRCUITS 417 9.1 ElectroStatic Discharge ................................. 417 9.2 Power supply circuits – INCOMPLETE ........................ 422 9.3 Amplifier circuits – PENDING ............................. 424 9.4 Oscillator circuits – INCOMPLETE .......................... 424 9.5 Phase-locked loops – PENDING ............................ 426 9.6 Radio circuits – INCOMPLETE ............................. 426 vi CONTENTS 9.7 Computational circuits .................................. 435 9.8 Measurement circuits – INCOMPLETE ........................ 457 9.9 Control circuits – PENDING .............................. 458 Bibliography ........................................... 458 10 ACTIVE FILTERS 461 11 DC MOTOR DRIVES 463 11.1 Pulse Width Modulation ................................. 463 12 INVERTERS AND AC MOTOR DRIVES 467 13 ELECTRON TUBES 469 13.1 Introduction ........................................ 469 13.2
Load more

Recommended publications
  • Amateur Radio Software Distributed with (X)Ubuntu LTS Serge Stroobandt, ON4AA
    Amateur Radio Software Distributed with (X)Ubuntu LTS Serge Stroobandt, ON4AA Copyright 2014–2018, licensed under Creative Commons BY-NC-SA Introduction Amateur radio (also called “ham radio”), is a technical hobby Many ham radio stations are highly integrated with computers. Radios are interfaced with com- puters to aid with contact logging, propagation prediction, station spotting, antenna steering, signal (de)modulation and filtering. For many years, amateur radio software has been a bastion of Windows™ ap- plications developed by However, with the advent of the Rasperry Pi, amateur radio hobbyists are slowly but surely discovering GNU/Linux. Most of the software for GNU/Linux is available through package repositories. Such package repositories come by default with the GNU/Linux distribution of your choice. Package management systems offer many benefits in the form of security (you know what you are getting from whom) and ease-of-use (packages are upgraded automatically). No longer does one need to wander the back corners of the internet to find wne or updated software, exposing oneself to the risk of catching a computer virus. A number of GNU/Linux distributions offer freely installable ham-related packages under the “Amateur Radio” section of their main repository. The largest collection of ham radio packages is offeredy b OpenSuse and De- bian-derived distributions like Xubuntu LTS and Linux Mint, to name but a few. Arch Linux may also have whole bunch of ham related software in the Arch User Repository (AUR). 1 Synaptic One way to find and tallins ham radio packages on Debian-derived distros is by using the Synaptic graphical package manager (see Figure 1).
    [Show full text]
  • Basic Electronics
    14 Basic Electronics In this chapter, we lead you through a study of the basics of electronics. After completing the chapter, you should be able to Understand the physical structure of semiconductors. Understand the essence of the diode function. Understand the operation of diodes. Realize the applications of diodes and their use in the design of rectifiers. Understand the physical operation of bipolar junction transistors. Realize the applications of bipolar junction transistors. Understand the physical operation of field-effect transistors. Realize the application of field-effect transistors. Perform rapid analysis of transistor circuits. REFERENCES 1. Giorgio Rizzoni, Principles and Applications of Electrical Engineering, McGraw Hill, 2003. 2. J. R. Cogdel, Foundations of Electronics, Prentice Hall, 1999. 3. Donald A., Neaman, Electronic Circuit Analysis and Design, McGraw Hill, 2001. 4. Sedra/Smith, Microelectronic Circuits, Oxford, 1998. 1 Basic Electronics 2 14.1 INTRODUCTION Electronics is one of the most important fields in existence today. It has greatly influenced everything since early 1900s. Everyone nowadays realize the impact of electronics on our daily life. Table 14-1 shows many important areas with tremendous impact of electronics. Table 14-1 Various Application Areas of Electronics Area Examples of Applications Automotives Electronic ignition system, antiskid braking system, automatic suspension adjustment, performance optimization. Aerospace Airplane controls, spacecrafts, space missiles. Telecommunications Radio, television, telephones, mobile and cellular communications, satellite communications, military communications. Computers Personal computers, mainframe computers, supercomputers, calculators, microprocessors. Instrumentation Measurement equipment such as meters and oscilloscopes, medical equipment such as MRI, X- ray machines, etc. Microelectronics Microelectronic circuits, microelectromechanical systems. Power electronics Converters, Radar Air traffic control, security systems, military systems, police traffic radars.
    [Show full text]
  • 1999-2017 INDEX This Index Covers Tube Collector Through August 2017, the TCA "Data Cache" DVD- ROM Set, and the TCA Special Publications: No
    1999-2017 INDEX This index covers Tube Collector through August 2017, the TCA "Data Cache" DVD- ROM set, and the TCA Special Publications: No. 1 Manhattan College Vacuum Tube Museum - List of Displays .........................1999 No. 2 Triodes in Radar: The Early VHF Era ...............................................................2000 No. 3 Auction Results ....................................................................................................2001 No. 4 A Tribute to George Clark, with audio CD ........................................................2002 No. 5 J. B. Johnson and the 224A CRT.........................................................................2003 No. 6 McCandless and the Audion, with audio CD......................................................2003 No. 7 AWA Tube Collector Group Fact Sheet, Vols. 1-6 ...........................................2004 No. 8 Vacuum Tubes in Telephone Work.....................................................................2004 No. 9 Origins of the Vacuum Tube, with audio CD.....................................................2005 No. 10 Early Tube Development at GE...........................................................................2005 No. 11 Thermionic Miscellany.........................................................................................2006 No. 12 RCA Master Tube Sales Plan, 1950....................................................................2006 No. 13 GE Tungar Bulb Data Manual.................................................................
    [Show full text]
  • Elementary Filter Circuits
    Modular Electronics Learning (ModEL) project * SPICE ckt v1 1 0 dc 12 v2 2 1 dc 15 r1 2 3 4700 r2 3 0 7100 .dc v1 12 12 1 .print dc v(2,3) .print dc i(v2) .end V = I R Elementary Filter Circuits c 2018-2021 by Tony R. Kuphaldt – under the terms and conditions of the Creative Commons Attribution 4.0 International Public License Last update = 13 September 2021 This is a copyrighted work, but licensed under the Creative Commons Attribution 4.0 International Public License. A copy of this license is found in the last Appendix of this document. Alternatively, you may visit http://creativecommons.org/licenses/by/4.0/ or send a letter to Creative Commons: 171 Second Street, Suite 300, San Francisco, California, 94105, USA. The terms and conditions of this license allow for free copying, distribution, and/or modification of all licensed works by the general public. ii Contents 1 Introduction 3 2 Case Tutorial 5 2.1 Example: RC filter design ................................. 6 3 Tutorial 9 3.1 Signal separation ...................................... 9 3.2 Reactive filtering ...................................... 10 3.3 Bode plots .......................................... 14 3.4 LC resonant filters ..................................... 15 3.5 Roll-off ........................................... 17 3.6 Mechanical-electrical filters ................................ 18 3.7 Summary .......................................... 20 4 Historical References 25 4.1 Wave screens ........................................ 26 5 Derivations and Technical References 29 5.1 Decibels ........................................... 30 6 Programming References 41 6.1 Programming in C++ ................................... 42 6.2 Programming in Python .................................. 46 6.3 Modeling low-pass filters using C++ ........................... 51 7 Questions 63 7.1 Conceptual reasoning ...................................
    [Show full text]
  • Getting Started in High Performance Electronic Design
    Getting started in high performance electronic design Wojtek Skulski Department of Physics and Astronomy University of Rochester Rochester, NY 14627-0171 skulski _at_ pas.rochester.edu First presented May/23/2002 Updated for the web July/03/2004 Wojtek Skulski May/2002 Department of Physics and Astronomy, University of Rochester Getting started with High performance electronic design • 3-hour class • Designing high performance surface mount and multilayer boards. • What tools and resources are available? • How to get my design manufactured and assembled? • Board design with OrCAD Capture and Layout. • When and where: • Thursday, May/23/2002, 9-12am, Bausch&Lomb room 106 (1st floor). • Slides updated for the web July/03/2004. • Reserve your handout. • Send e-mail to [email protected] if you plan to attend. • Walk-ins are invited, but there may be no handouts if you do not register. • See you there! Wojtek Skulski May/2002 Department of Physics and Astronomy, University of Rochester The goal and outline of this class • Goal: • Describe the tools available to us for designing high performance electronic instruments. • Outline • Why do we need surface mount and multilayer boards? • What tools and resources are available? • How to get my PCB manufactured? • How to get my board assembled? • Designing with OrCAD Capture and OrCAD Layout. • The audience • You know the basics of electronics. • … and you need to get going quickly with your design. Wojtek Skulski May/2002 Department of Physics and Astronomy, University of Rochester Disclaimer • I am describing tools and methods which work for me. • I do not claim that this information is complete.
    [Show full text]
  • Lee De Forest Claimet\He Got the Idea for His Triode ''Audion" From
    Lee de Forest claimet\he got the idea for his triode h ''audion" from wntching a gas flame bum. John Ambrose Flen#ng thought that story ·~just so much hot air. lreJess telegraphy held excit­ m WIng promise at the beginning of the twentieth century. Peo­ ~With Imagination could seethe po.. tentlal thot 'the rematkoble new technology offered forworlct1Nk:le com­ munfcotion. However, no one could hove predicted the impact that the soon-to-be-developed "osdllotlon volve" ond "oudlon" Wireless-telegra­ phy detector& wauid have on elec­ tronics technology. Backpouncl. Shortly before 1900, · Guglielmo Morconl had formed his own company to develop wireless­ telegraphy technology. He demon­ strated that wireless set-ups on ships eot~ld~messageswlth nearby stations on other ships or on land. t The Marconi Company hOd also j transmitted messages across the EhQ­ Jish Channel. By the end of 1901. Mar­ coni extended the range of his equipmenttospantheAtlan1tcOcean. It was obvlgus. 1hot ~raph ~MeS with subrhatlrie cables and ihelr lnber­ ent flmltations woUld soon disappear, Ships· at sea would no longer be iso­ la1ed. No locatlon on Eorth would. be too remote to send and receive mes­ sages. Clear1y; the opportunity existed tor enormous tiOOnciql gain once Jelio­ ble equlprrient was avoltable. To that end, 1Uned electrical circuits were developed to reduce the band­ width of the signals produced by ,the spark transrnlf'tirs. The resonont clfcults were also used in a receiver to select one signal from omong several trans­ missions. Slm~deslgn principles for resonont ontennas were also being explored and applied, However, the senstflvlty and reUabltlty of the devices used to ctetectthe Wireless signals were still hln­ cterlng the development of commer­ () cial wireless-telegraph nefWorks.
    [Show full text]
  • Nanoelectronic Mixed-Signal System Design
    Nanoelectronic Mixed-Signal System Design Saraju P. Mohanty Saraju P. Mohanty University of North Texas, Denton. e-mail: [email protected] 1 Contents Nanoelectronic Mixed-Signal System Design ............................................... 1 Saraju P. Mohanty 1 Opportunities and Challenges of Nanoscale Technology and Systems ........................ 1 1 Introduction ..................................................................... 1 2 Mixed-Signal Circuits and Systems . .............................................. 3 2.1 Different Processors: Electrical to Mechanical ................................ 3 2.2 Analog Versus Digital Processors . .......................................... 4 2.3 Analog, Digital, Mixed-Signal Circuits and Systems . ........................ 4 2.4 Two Types of Mixed-Signal Systems . ..................................... 4 3 Nanoscale CMOS Circuit Technology . .............................................. 6 3.1 Developmental Trend . ................................................... 6 3.2 Nanoscale CMOS Alternative Device Options ................................ 6 3.3 Advantage and Disadvantages of Technology Scaling . ........................ 9 3.4 Challenges in Nanoscale Design . .......................................... 9 4 Power Consumption and Leakage Dissipation Issues in AMS-SoCs . ................... 10 4.1 Power Consumption in Various Components in AMS-SoCs . ................... 10 4.2 Power and Leakage Trend in Nanoscale Technology . ........................ 10 4.3 The Impact of Power Consumption
    [Show full text]
  • History of Thethermionic Tube / Valve / Vacuum
    History of theThermionic Tube / Valve / Vacuum Tube – Page 1 The following notes have been assembled by Phil (VK5SRP) from original material and material from several web sites, including Wikipedia for a class run at the North East Radio Club, South Australia January 2016. In electronics, a vacuum tube, an electron tube, or just a tube (North America), or valve (Britain and some other regions) is a device that controls electric current between electrodes in an evacuated container. Vacuum tubes mostly rely on thermionic emission of electrons from a hot filament or a cathode heated by the filament/heater. This type is called a thermionic tube or thermionic valve. A Photo-tube, however, achieves electron emission through the photoelectric effect. Not all electronic circuit valves/electron tubes are vacuum tubes (evacuated). Gas-filled tubes are similar devices containing a gas, typically at low pressure, which exploit phenomena related to electric discharge in gases, usually without a heater. Although thermionic emission was originally reported in 1873 by Frederick Guthrie, it was Thomas Edison's 1883 investigation that spurred future research, the phenomenon thus becoming known as the "Edison effect". Edison patented what he found, but he did not understand the underlying physics, nor did he have an inkling of the potential value of the discovery. It wasn't until the early 20th century that the rectifying property of such a device was utilised, most notably by John Ambrose Fleming, who used the Diode tube to detect (demodulate) radio signals. Lee De Forest's 1906 "Audion" was also developed as a radio detector, and soon led to the development of the Triode tube.
    [Show full text]
  • The Venerable Triode
    The Venerable Triode The very first gain device, the vacuum tube Triode, is still made after more than a hundred years, and while it has been largely replaced by other tubes and the many transistor types, it still remains popular in special industry and audio applications. I have some thoughts on why the Triode remains special for audio amplifiers (apart from sentimental value) that I would like to share. But first, a quick tutorial about Triodes: The earliest Triode was Lee De Forest's 1906 “Audion”. Over a hundred years development has resulted in many Triodes, large and small. The basic design has remained much the same. An evacuated container, usually glass, holds three signal connections, seen in the drawing as the Cathode, Grid and Plate (the Plate is also referred to as the Anode). In addition you see an internal heater, similar to a light bulb filament, which is used to heat the Cathode. Triode operation is simple. Electrons have what's known as “negative electrostatic charge”, and it is understood that “like” charges physically repel each other while opposite charges attract. The Plate is positively charged relative to the Cathode by a battery or other voltage source, and the electrons in the Cathode are attracted to the Plate, but are prevented by a natural tendency to hang out inside the Cathode and avoid the vacuum. This is where the heater comes in. When you make the Cathode very hot, these electrons start jumping around, and many of them have enough energy to leave the surface of the Cathode.
    [Show full text]
  • Pcb-20050609 an Interactive Printed Circuit Board Layout System for X11
    1 Pcb-20050609 an interactive printed circuit board layout system for X11 harry eaton i Table of Contents Copying ...................................... 1 History ....................................... 2 1 Overview .................................. 4 2 Introduction ............................... 5 2.1 Symbols .................................................... 5 2.2 Vias........................................................ 5 2.3 Elements ................................................... 5 2.4 Layers ...................................................... 7 2.5 Lines ....................................................... 8 2.6 Arcs........................................................ 9 2.7 Polygons ................................................... 9 2.8 Text ...................................................... 10 2.9 Nets....................................................... 10 3 Getting Started........................... 11 3.1 The Application Window ................................... 11 3.1.1 Menus ................................................ 11 3.1.2 The Status-line and Input-field ......................... 14 3.1.3 The Panner Control.................................... 14 3.1.4 The Layer Controls .................................... 15 3.1.5 The Tool Selectors ..................................... 16 3.1.6 Layout Area........................................... 18 3.2 Log Window ............................................... 18 3.3 Library Window ........................................... 18 3.4 Netlist Window
    [Show full text]
  • Ngspice User Manual
    Ngspice User’s Manual Version 35 plus (ngspice development version) Holger Vogt, Marcel Hendrix, Paolo Nenzi, Dietmar Warning September 27, 2021 2 Locations The project and download pages of ngspice may be found at Ngspice home page http://ngspice.sourceforge.net/ Project page at SourceForge http://sourceforge.net/projects/ngspice/ Download page at SourceForge https://sourceforge.net/projects/ngspice/files/ng-spice- rework/ Git source download https://sourceforge.net/p/ngspice/ngspice/ci/master/tree/ Status This manual is a work in progress. Some to-dos are listed in Chapt. 24.3. More is surely needed. You are invited to report bugs, missing items, wrongly described items, bad English style, etc. How to use this Manual The manual is a “work in progress.” It may accompany a specific ngspice release, e.g. ngspice-35 as manual version 35. If its name contains ‘Version xxplus’, it describes the actual code status, found at the date of issue in the Git Source Code Management (SCM) tool. This manual is intended to provide a complete description of ngspice’s functionality, features, commands, and procedures. This manual is not a book about learning SPICE usage, however the novice user may find some hints how to start using ngspice. Chapter 21.1 gives a short introduction how to set up and simulate a small circuit. Chapter 32 is about compiling and installing ngspice from a tarball or the actual Git source code, which you may find on the ngspice web pages. If you are running a specific Linux distribution, you may check if it provides ngspice as part of the package.
    [Show full text]
  • Silver Service ORIGIN Driver Tubes Have Coloured Stickers, Path
    AUDION SILVER NIGHT SPECIAL EDITION AUDION SILVER NIGHT SPECIAL EDITION EXOTICA INTEGRATED VALVE AMPLIFIER £4,150 INTEGRATED VALVE AMPLIFIER £4,150 EXOTICA The Silver Night warmth somehow feels more natural to mean-spiritedness and is overcome Special Edition and is accompanied with masses of by using better and thicker silver has attractive airy detail that is highly extended wiring – as I suspect is the case here. designer lines yet very sweet and free from grain, My appetite is whetted so I play the all placed in a wonderfully inky black Bass With Chorus Aria – Eilt, Ihr and silent backdrop. Angefochtnen Seelen from JS Bach’s St Playing Lorde’s Royals on vinyl via my John Passion conducted by Karl Richter Timestep T-01 MC phono stage (HFC on HDCD. 371) is surprising. This track has really I am now better prepared for my deep bass and I’m expecting the Special expectations to be exceeded. Large Edition Silver Night to stumble, but I’m flowing introductory sweeps of the actually the one that’s wrong-footed. orchestra have excellent breadth Bass is deep and far faster than this and tone and the bass vocal rises design has any right to deliver. A single- majestically with real authority and ended 300B amplifier should, by rights luscious body and weight. The struggle here, but this performance has orchestra doesn’t have massive weight, rasp and plenty of taut bass front-to-back depth, but this criticism detail that doesn’t slouch behind the seems churlish, as this rendition is way higher octaves.
    [Show full text]