DOCSLIB.ORG

Refrigerated Incubator Reliable Performance for Universal Applications Welcome to Esco

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Refrigerated Incubator Reliable Performance for Universal Applications Welcome to Esco Refrigerated Incubator Reliable Performance For Universal Applications WELCOME TO ESCO Esco’s Vision is to provide enabling technologies for scientific discoveries to make human lives healthier and safer. • A leader in the development of controlled environment, • Group total of more than 600 employees. laboratory and pharmaceutical equipment solutions. • Distributors in more than 100 countries. • A world leader in biological safety cabinets. • Products independently tested to international standards. • Esco has established offices in 13 countries such as • Large R&D investments, world leading technologies. Bahrain, China, India, Japan, Korea, Malaysia, Philippines, • State-of-the-art production; vertically integrated Singapore, UK, US, Vietnam, South Africa and Indonesia manufacturing floor space. and is continually expanding. • Worldwide service played out over a geographic expanse • North American facilities in Pennsylvania; sales, service, so broad that the sun never sets on what we do. logistics for US & Canada. GLOBAL NETWORK Global Offices Distributors PRODUCTS AND APPLICATION Esco Life Science Tools Laboratory Equipment Medical Pharmaceutical Equipment Equipment Assisted Containment / Biosafety and Incubators and Fume Hoods Reproductive Compounding Laminar Flow Ovens Technology Pharmacy Class II Type A2 Biological Laboratory Fume Hoods Forced Convection ART Workstations Downflow Booths Safety Cabinets Laboratory Ovens Ductless Fume Hoods CO2 Incubators with Powder Weighing Class II Type B2 Biological Forced Convection Suppressed O2 Balance Enclosures Safety Cabinets Fume Scrubbers Laboratory Incubators Multi-room Incubators Pharmacy Isolators Class III Biological Safety Refrigerated Incubators Cabinets Exhaust Blowers Cytotoxic Safety Cabinets CO2 Incubators Horizontal Laminar Flow Fume Hood Airflow Remote Monitoring, Soft Capsule Clean Benches Monitors Data Logging, and Vertical Laminar Flow Programming Software Air Showers Clean Benches Straddle Units PCR Laboratory Animal Garment Storage Research Workstations Cold Storage Cabinets PCR Thermal Cyclers PCR Cabinets Pass Boxes Not Available in North Laboratory Refrigerators America Transfer Hatches Laboratory Freezers Laboratory Combination Freezers Ultra-low Temperature Freezers 4 Refrigerated Incubator Refrigerated Incubator INTRODUCTION Esco Isotherm Refrigerated Incubators are widely used in applications such as B.O.D. Determinations, Environmental Research, Plant and Insect Studies, Fermentation Studies, and Bacterial Culturing among many others. Intuitive interfaces, microprocessor PID controls with pre-heat chamber technology, dual auto-defrosting system, UV disinfection, precisely tuned and tested ventilation and insulation package, all supported by Esco’s solutions - based sales and service representatives worldwide. KEY FeatURES PRE-heat CHAMBER TECHNOLOGY • No exposed heating elements located inside the chamber to ensure maximum user safety. • Stable heating and maximum temperature uniformity in the chamber. ISOTHERM® REFRIGERATED INCUBATOR • Standard temp setting range 0°C up to 100°C for maximum application flexibility. • Secure 2-point door seal and eccentric hinge ensure maximum gasket compression for stable chamber temperature. AUTO-DEFROSTING SYSTEM • Auto-heating activates and continues for a predetermined time during opration. • Auto-defrosting during operation • Auto-defrosting activates regularly. Influence on temperature fluctuation and uniformity is minimal. SIDE ACCESS port For temperature validation & mapping. Isotherm® Refrigerated Incubator available in EASY TO SERVICE 3 sizes,110L, 170L, 240L. • Diagnostic functions in the microprocessor include historical read- out of temperatures. • Diagnostic menu provides read-out of all sensor inputs and controller settings. • Service can be carried out from the front. • All electronics components are isolated from the work chamber and easily accessible for replacement. • Low service costs. 5 Refrigerated Incubator UV DISINFECTION GERMAN-MADE EBM PAPST FAN Auto-running disinfection after startup and during testing process as well, is adjustable to meet different requirements. UV light function stops when door is opened and resumes after it is closed. GLASS DOOR For observing samples inside the chamber during operation Water RESEVOIR to collect water during defrosting Isotherm® Refrigerated Incubator, Model IFC-110-8 lds) 8 fo 6 4 opulation (10 VENtillatioN SYSTEM 2 erial P ct • Forced convection design allows rapid temperature Ba 04 hours 8 hours112 hours 6 hours20 hours24 hours response rates, improves uniformity, and reduces fluctuation. ContactTime in Hours • Low noise during operation. Built-In Protection • Ventilated stainless steel shelves contribute to uniform air External surfaces are powder coated with circulation. Esco to eliminate 99.9% of surface bacteria within 24 hours of exposure. 6 Refrigerated Incubator CONTROLLER TYPE SmartSENSE™ MICROPROCESSOR PID CONTROL TECHNOLOGY “Actual” and “Set Point” Displays LED Indicators Show actual temperature and Indicate condition of equipment temperature set point at the same time. during operation. Function Keys Program Key For temperature, alarm and Over Temperature other settings. Indicator • Instrument-grade precision platinum temperature probe. • Audible confirmation of all settings. • Tuned PID control ensures fast ramp time, prevents overshoot, • Diagnostic functions provide access to chamber historical and ensures stable temperature once setpoint is achieved. temperatures and sensor read-outs to simplify service. • Twin temperature displays for easy monitoring. • Diagnostic LEDs on electronics PCB simplify service. • Built-in menu is intuitive, easy to operate; left display shows • Defrost setting function parameter being set, and right display shows preset value. • UV setting function WIDE RANGE OF PROGRAM OPTIONS oC oC 100 100 80 80 60 60 40 40 20 20 0 0 Sample Program 1 Sample Program 2 Repeats of identical processes based on user’s setting of ‘start Running different processes sequentially based on user’s setting of temp’, ‘arrival temp’, and running time after arrival. All settings ‘start temp’, ‘arrival temp’, and running time after arrival. Different can be done in a single program. For example, repeat a process programs may be linked to extend the total number of sequences, from 50°C to 70°C and back. thus creating virtually unlimited programming options. 7 Refrigerated Incubator OTHER SUPERB FEATURES FORCED CONVECTION LaboratorY REFRIGERATED INCUBATOR ApplicatioNS APPLICATION APPLICATION a. Biochemical Oxygen Demand (BOD) determinations of waste water and sewage e. Bacterial culturing b. Plant cell growth f. Mycology studies c. Fish and Insect studies g. Drug stability tests d. Fermentation studies SAFE, SUPERIOR PROTECTION FOR SAMPLE, USER AND THE ENVIRONMENT • Electronic over-temperature protection built into the microprocessor. • Controller will control temperature at the over temperature setpoint. • All electrical components are UL recognized. • Electrical circuit protection in accordance with UL requirements. • Over Temperature LED illuminates if the chamber encounters temperature above the set-point. 7 7 Refrigerated IncubatorRefrigerated Incubator ERGONOMIC DESIGN AERGONOMICCCESS FORERGONOMIC TemperatURE DESIGN VALID atioDESIGNN AND MAPPING ACCESS ACCESSFOR TEMPERATURE FOR TEMPERATURE VALIDATION VALIDATION AND MAPPING AND MAPPING Access port Access port Access port insideAccess chamber port inside chamber SAFE, SUPERIORSAFE, SUPERIOR PROTECTION PROTECTION FOR SAMPLE, FOR SAMPLE, USER AND USER THE AND ENVIRONMENT THE ENVIRONMENT • Multiple redundant• Multiple over-temperature redundant over-temperature protection systems protection to guarantee systems to guarantee• Red LED illuminates• Red LED if external illuminates mechanical if external temperature mechanical protection temperature is protection is maximum samplemaximum and user sample protection. and user protection. engaged. engaged. • Electronic over-temperature• Electronic over-temperature protection built protection into the microprocessor. built into the microprocessor.• Controller will• Controllercontrol temperature will control at temperature the over-temperature at the over-temperature setpoint. setpoint. • Redundant mechanical• Redundant over-temperature mechanical over-temperature protection, adjustable protection, from adjustable • fromAll electrical •components All electrical are components UL recognized. are UL recognized. the front, independentthe front, from independent the microprocessor. from the microprocessor. • Electrical circuit• Electrical protection circuit in accordance protection within accordance UL requirements. with UL requirements. • Overall temperature• Overall protection temperature meets protection DIN 12880 meets Class DIN 3.1. 12880 Class 3.1. ERGONOMICERGONOMIC DOOR HANDLE DOOR HANDLE WITH KEYLOCK WITH KEYLOCK RS485 COMMUNICATIONRS485 COMMUNICATION PORT PORT Ergonomic door handle,Ergonomic operation door handle, is operationDoor is keylock preventsDoor keylockunauthorized prevents unauthorized The RS485 providesThe serial RS485 communication provides serial portcommunication for PC. It can port for PC. It can gravity assisted. gravity assisted. access to sensitiveaccess samples. to sensitive samples. be daisy chained befrom daisy product chained to productfrom product and connected to product and connected to a PC. to a PC. EASY-TO-CLEANEASY-TO-CLEAN • “Cleanroom”• design“Cleanroom” with minimal design joints with andminimal crevices
Load more

Recommended publications
  • Exploring Small-Scale Chemostats to Scale up Microbial Processes: 3-Hydroxypropionic Acid Production in S
    Lawrence Berkeley National Laboratory Recent Work Title Exploring small-scale chemostats to scale up microbial processes: 3-hydroxypropionic acid production in S. cerevisiae. Permalink https://escholarship.org/uc/item/43h8866j Journal Microbial cell factories, 18(1) ISSN 1475-2859 Authors Lis, Alicia V Schneider, Konstantin Weber, Jost et al. Publication Date 2019-03-11 DOI 10.1186/s12934-019-1101-5 Peer reviewed eScholarship.org Powered by the California Digital Library University of California Lis et al. Microb Cell Fact (2019) 18:50 https://doi.org/10.1186/s12934-019-1101-5 Microbial Cell Factories RESEARCH Open Access Exploring small-scale chemostats to scale up microbial processes: 3-hydroxypropionic acid production in S. cerevisiae Alicia V. Lis1, Konstantin Schneider1,2, Jost Weber1,3, Jay D. Keasling1,4,5,6,7, Michael Krogh Jensen1 and Tobias Klein1,2* Abstract Background: The physiological characterization of microorganisms provides valuable information for bioprocess development. Chemostat cultivations are a powerful tool for this purpose, as they allow defned changes to one single parameter at a time, which is most commonly the growth rate. The subsequent establishment of a steady state then permits constant variables enabling the acquisition of reproducible data sets for comparing microbial perfor- mance under diferent conditions. We performed physiological characterizations of a 3-hydroxypropionic acid (3-HP) producing Saccharomyces cerevisiae strain in a miniaturized and parallelized chemostat cultivation system. The physi- ological conditions under investigation were various growth rates controlled by diferent nutrient limitations (C, N, P). Based on the cultivation parameters obtained subsequent fed-batch cultivations were designed. Results: We report technical advancements of a small-scale chemostat cultivation system and its applicability for reliable strain screening under diferent physiological conditions, i.e.
    [Show full text]
  • Microscope Compatible Cell-Culture Incubator
    Microscope Compatible Cell-Culture Incubator BME 400 December 14th, 2016 Client: Dr. John Puccinelli, UW-Madison Dept. of Biomedical Engineering Advisor: Dr. Mitchell Tyler, UW-Madison Dept. of Biomedical Engineering Team Members: Trevor Zarecki - Team Leader Jenny Westlund - Communicator Peter Hartig - BPAG Jack McGinnity - BWIG Steve Gock - BSAC Abstract Live cell imaging experiments are difficult to perform over long periods of time on normal lab microscopes without incubation capabilities. Current commercial microscope-stage incubators are expensive, not compatible with multiple microscopes and ineffective at evenly controlling the environment. The client desires an inexpensive incubation chamber compatible with cell microscopy that is capable of maintaining desired temperature, CO2, and humidity evenly throughout the chamber. The device should not alter image quality, and should be accessible for changing media or cell culture dishes. An initial prototype has been developed that involves a small, cohesive system to regulate temperature, CO2, and humidity. Testing of the current prototype has demonstrated regulation of these three systems, through an automated feedback system capable of maintaining the system near a physiological set point. Further development of the design will ensure that it performs efficiently according to all specifications, and ultimately help bridge the gap in the market between high-cost, functional incubation systems and cheaper, less effective designs. 1 Table of Contents Introduction 3 Motivation 3 Existing
    [Show full text]
  • Effective Contamination Control with CO2 Incubators
    WHITE PAPER No. 30 Effective Contamination Control with CO2 Incubators Ines Kristina Hartmann¹, James Jarvis² ¹Eppendorf AG, ²Eppendorf, Inc. Executive Summary CO2 incubators provide an optimal cell growth environ- ment by maintaining a humidified atmosphere with temperature and carbon dioxide control. These conditions not only promote cell growth, but also the growth of contaminants, like bacteria, yeast, molds and other fungi. The contamination-reducing features of an incubator’s functional design and the effectiveness of its self-decon- tamination system must be considered in choosing an instrument. In this paper, we compare various strategies for preventing contamination in CO2 incubators, from the functional design of the device to self-disinfection programs. We also give some useful tips to prevent contamination when using CO2 incubators. Introduction Sources of contamination How do contaminants get into a CO2 incubator? Contamination is a major cause of frustration when culturing The CO2 incubator may become an indirect source of con- cells. There are many sources of contamination, either direct tamination. Unlike a biological safety cabinet, an incubator or indirect. Direct sources are contaminated reagents, media cannot prevent the influx of airborne contaminants, as the or seed culture. Media and reagents from reputable suppliers door must be opened during routine use. The incubator are rarely delivered contaminated nowadays. New cell lines chamber can also be contaminated by carelessness in aseptic can introduce contaminants into the lab, especially when techniques, and unnoticed splashes from cell culture vessels. they are given from lab to lab. They should be quarantined Some CO2 incubators use a HEPA filter to remove microor- before culturing with the rest of the cells.
    [Show full text]
  • Microbiology Laboratory Exercises Third Edition 2020
    MICROBIOLOGY Laboratory Exercises Third Edition Keddis & Rauschenbach 2020 Photo Credits (in order of contribution): Diane Davis, Ines Rauschenbach & Ramaydalis Keddis Acknowledgements: Many thanks to those in the Department of Biochemistry and Microbiology, Rutgers University, who have through the years inspired our enthusiasm for the science and teaching of microbiology, with special thanks to Diane Davis, Douglas Eveleigh and Max Häggblom. Safety: The experiments included in this manual have been deemed safe by the authors when all necessary safety precautions are met. The authors recommend maintaining biosafety level 2 in the laboratory setting and using risk level 1 organisms for all exercises. License: This work is licensed under a Creative Commons Attribution- NonCommercial-NoDerivatives 4.0 International License Microbiology Laboratory Exercises Third Edition 2020 Ramaydalis Keddis, Ph.D. Ines Rauschenbach, Ph.D. Department of Biochemistry and Microbiology Rutgers, The State University of New Jersey CONTENTS PAGE Introduction Schedule ii Best Laboratory Practices Iii Working in a Microbiology Laboratory iv Exercises Preparation of a Culture Medium 1 Culturing and Handling Microorganisms 3 Isolation of a Pure Culture 5 Counting Bacterial Populations 8 Controlling Microorganisms 10 Disinfectants 10 Antimicrobial Agents: Susceptibility Testing 12 Hand Washing 14 The Lethal Effects of Ultraviolet Light 15 Selection of Fungi from Air 17 Microscopy 21 Morphology and Staining of Bacteria 26 Microbial Metabolism 30 Enzyme Assay 32 Metabolic
    [Show full text]
  • Technical Guidance for Microbiology Incubators
    DRAFT – FOR DISCUSSION PURPOSES ONLY DEPARTMENT OF ENVIRONMENTAL PROTECTION Laboratory Accreditation Program Document Number: # Title: Microbiology Incubator Guidance Effective Date: Date Authority: 27 Pa.C.S. §§ 4101 – 4113 (relating to environmental laboratory accreditation), Environmental Laboratory Accreditation Regulations, 25 Pa. Code Chapter 252 Policy: It is the policy of the Department of Environmental Protection (DEP) to provide laboratory management personnel with the information necessary to either obtain or maintain accreditation to perform and report environmental analyses in Pennsylvania. Purpose: This technical guidance will provide laboratory management with the tools to develop procedures for maintenance and verification of incubation units used for microbiological testing that meet the requirements for laboratory accreditation. Applicability: This guidance will apply to all laboratories desiring to obtain and/or maintain accreditation under 25 Pa. Code Chapter 252. Disclaimer: The policies and procedures outlined in this guidance document are intended to supplement existing requirements. Nothing in the policies or procedures will affect regulatory requirements. The policies and procedures herein are not an adjudication or a regulation. There is no intent on the part of the Department to give these rules that weight or deference. This document establishes the framework within which DEP will exercise its administrative discretion in the future. DEP reserves the discretion to deviate from this policy statement if circumstances
    [Show full text]
  • Microlab® STAR™
    Microlab ® STAR™ Microlab ® STAR ™ AUTOMATED WORKFLOW SOLUTIONS CENTERED AROUND YOUR ASSAY The STAR combines Hamilton's patented pipetting technology including precise lock-and-key tip attachment, unrivaled liquid level detection, and comprehensive volume ranges to create flexible liquid handling workstations. Available in three base platform sizes, the STAR portfolio incorporates countless options to automate your workflows. Hamilton Robotics has also partnered with top leaders in the biotechnology industry to provide Standard Solutions based on commonly automated applications. Offering ready-to-start protocols for a variety of applications such as NGS, ELISA, and forensic assays, our Standard Solutions provide a faster way to automate your processes. 2 1 PATENTED TECHNOLOGY The STAR utilizes Hamilton’s proprietary Compressed O-Ring Expansion (CO-RE®) technology. CO-RE minimizes the production of aerosols and allows disposable tips or washable, steel needles to be used on channels in the same run. 2 MULTI-FUNCTIONAL ARM Our technology offers high pipetting accuracy and precision, from sub-microliter to large volumes, using Independent Channels and/or the Multi-Probe Head (MPH). Labware transportation is possible with the iSWAP® or CO-RE Grippers. The STAR can incorporate a camera, tube transportation, and other channel tools on a single arm. Comprehensive pipetting range: ■■■0.5 μL to 1 mL using the 1 mL Independent Channel ■■■50 μL to 5 mL using the 5 mL Independent Channel ■■■1 μL to 1 mL using the CO-RE 96 MPH ■■■0.1 μL to 50 μL using the CO-RE 384 MPH 3 FLEXIBLE SETUP The high-capacity deck is customized specific to your workflow, accommodating a wide range of labware and automated devices that can easily be exchanged to support multiple assays on one platform.
    [Show full text]
  • Thermo Scientific Solutions Automated Liquid Handling, Detection Model Cat
    THERMO SCIENTIFIC AUTOMATED LIQUID HANDLING, DETECTION AND SAMPLE PURIFICATION SOLUTIONS Versette™ RapidStak™ Also available: 96-and 384-channel Automated Microplate • A complete range of 96- and 384-well solid and strip microplates. Automated Liquid Handler Stacker • A complete line of sample storage tubes and equipment. • Total volume range 0.5-300 µl • Works seamlessly with • A complete range of Thermo Scientific manual and electronic • 96- and 384-channel interchangeable the entire Multidrop line of single and multichannel pipettes and tips. pipetting heads dispensers • Laboratory automation solutions for microplate instrument systems. • Compatible with D.A.R.T.sTM tips with • Schedule and automate any unique sealing properties two instruments with the • 6-position stage with compact dual level Thermo ScientificTM PolaraTM RS deck structure software For additional information contact your ™ • User-friendly programming options • Capacity from 30 to 150 plates Thermo Fisher Scientific sales representative or visit: with onboard touch screen or Thermo • Quick and easy setup www.thermoscientific.com/kingfisherinfo ScientificTM ControlMateTM PC software Model Cat. No. www.thermoscientific.com/versette RapidStak F01350 www.thermoscientific.com/multidrop RapidStak 2x F01351 Model Cat. No. www.thermoscientific.com/platereaders 30-Plate Stak Versette F01436 www.thermoscientific.com/wellwash Reference Guide Versette base unit 650-01-BS 50-Plate Stak F01437 www.thermoscientifc.com/ELISAsolutions 96- and 384-channel pipetting module for use with 650-02-NTC Polara RS Inquire 96- and 384-channel pipetting head 6-position stage 650-03-SPS Versette Pipetting Heads Orbitor RS™ 96-channel air displacement pipetting head. 650-06-9630 Volume 0.5-30 µl Automated Microplate Mover • Dedicated plate mover providing 96-channel air displacement pipetting head.
    [Show full text]
  • Kjeldahl Distillation Unit
    Terms of Business v There are frequent fluctuations in the cost of input. So we may not be able to give prior intimation regarding changes in the price structure. v Packing, Forwarding, Freight and Insurance will be Charged Extra. v Sales Tax and Excise Duty will be extra as per Central or State Government Rules. v Every possible care is taken in packing, but it is difficult to undertake responsibility of loss, breakage or damage during transit. v R/R and our bill be sent though V. P. P. or any scheduled bank. New customers are requested to advance 25% of the estimated value. v While placing the order, please give clear despatch instructions indicating C. S. T. Number, Name of Railway Station, Your Banker and Our Catalogue Number. v All problems shall be solved amicably subject to Ambala Jurisdiction. GUPTA SCIENTIFIC INDUSTRIES Ambala Cantt. THIS CANCELS OUR ALL PREVIOUS PRICE LISTS PPPrice List 2017-18 CATALOGUE CONTENTS Product Range Pages Interchangeable Standard Joints, Adapters, Stirrers, Condensers, 1 to 49 Laboratory Flasks, Columns, Separating Funnels, Assemblies, Glasswares Water Distillation, Essential Oil, Soxhlet Apparatus. Volumetric Burettes, Pipettes, Micro Pipettes, Measuring Cylinders, 50 to 74 Glasswares Measuring Flasks, Culture Tubes, Centrifuge Tube & Test Tubes. Sintered Sintered Crucibles, Funnels, Chromatography Columns and 75 to 84 Glasswares Filter Assembly. Gas Estimation Impinger, Gas Burettes, Tubes, Gas Wash Bottles, 85 to 90 Apparatus Oxygen Purity and Orsat Apparatus. Special Semi Micro Ware, Clinical Laboratory Apparatus, 91 to 97 Glasswares Electrodes and Milk Testing Apparatus. Supplementary Stopcocks, Rotaflow Screw Type Stopcocks, Teflon Key 98 to 123 Glasswares Stopcocks, Manometers, Weighing Bottles, S.
    [Show full text]
  • List of Equipments in the Department (Chemical Engineering) Mechanical
    List of Equipments in the Department (Chemical Engineering) Mechanical Operation lab Fluid Mechanics Lab Heat transfer Lab Mass Transfer lab • Cyclone Separator • Reynold’s Apparatus • Double Pipe Heat Exchanger • Tray Dryer • Plate & Frame Filter Press • Bernoulli’s Theorem Apparatus • Shell & Tube Heat Exchanger • Sieve Plate Distillation Column • Vibrating Screen • Pitot Tube Apparatus • Vertical Condenser • Liquid-Liquid Extraction • Jaw Crusher • Calibration of Orifice meter, • Computerized Control Shell & • Adsorption of CO 2 • Ball Mill Venturi meter and Rota meter Tube Heat Exchanger • Steam Distillation • Roll Crusher • Coefficient of Discharge of • Thermal Conductivity of Metal • Bubble Cap Distillation Column • Rotary Vacuum filter Orifice and Mouthpiece Bar • Cooling Tower • Fluidized Bed • Film & Drop Wise Condensation • Diffusivity Apparatus • Single Effect Evaporator • Fluidized Bed Dryer • Simple Steam Distillation • Simple Distillation • VLE Apparatus • Equilibrium Flash Distillation • Humidification & Dehumidification • Refractometer Process Control Lab Chemical Reaction Engg. Lab Fuel Combustion Energy Technology Lab Environmental Lab • Process Training Simulator with • Plug Flow Reactor • Flash & Fire Point Apparatus • BOD Incubator Modules (Software) • Isothermal Batch Reactor • Aniline Point Apparatus • pH Meter • Pressure Control System • Single Tube Packed Bed Reactor • Orsat Gas Analysis Apparatus • Sedimentation Apparatus • Flow Control System • RTD in CSTR / Mixed flow • Redwood Viscometer • UV-VIS Spectrophotometer • pH control System Reactor • Bomb Calorimeter • DO Meter • Real Time Simulator Trainer • RTD in Tubular Reactor • Smoke Point Apparatus • Digital Conductivity Meter • Level Control System • Adiabatic Batch Reactor • Temperature Control System • Distillation Column • Two Tank Interacting system • Two Tank Non-Interacting System • CSTR Control System Research Equipments • UV-Spectrophotometer • Gas Chomatography .
    [Show full text]
  • 3M™ Petrifilm™ Aerobic Count Plates Introduction SCIENTIFIC Petrifilm™ Plates Are Designed to Determine Total Aerobic Bacterial Populations
    3M™ Petrifilm™ Aerobic Count Plates Introduction SCIENTIFIC Petrifilm™ plates are designed to determine total aerobic bacterial populations. The easy-to-use BIO FAX! Petrifilm plates contain a film coated with nutrients and gelling agents. You will be able to monitor environmental bacterial counts using a variety of methods. Three environmental sampling methods are described as well as the standard inoculation procedure. Concepts • Microbiology • Plate counting Materials Petrifilm Aerobic Count Plates Incubator Petrifilm Spreader Pipet Chip clips Tape, double-sided Cotton swab, sterile Test tube, screwtop Safety Precautions Wear chemical-resistant gloves while working with microbial organisms. After use, Petrifilm Aerobic Count Plates will contain viable cultures. Do NOT reopen the Petrifilm plates or handle unnecessarily. Wash hands thoroughly with soap and water before leaving the laboratory. Extreme caution should be exercised when handling culture materials, and students should be trained in aseptic techniques. Always clean work areas and wash hands after working with microbiological materials. Procedures Standard Inoculation 1. Place the Petrifilm Aerobic Count Plate on a flat surface. Carefully peel open the Petrifilm plate being careful not to touch the nutrient gel with your fingers. (See Figure 1.) 2. With a pipet perpendicular to the Petrifilm plate, place 1 mL of sample (inoculum) onto the center of the bottom film. (See Figure 2.) 3. Release the top film; allow it to drop. Do not roll top film down. (See Figure 3.) Figure 1. Figure 2. Figure 3. FLAT side RIDGE side Figure 4. Figure 5. Figure 6. © 2016 Flinn Scientific, Inc. All Rights Reserved. Publication No. 10163 1 061616 3M™ Petrifilm™ Aerobic Count Plates continued 4.
    [Show full text]
  • DIVAS) to Determine Influence of Growth Rate on Invasion of Respiratory Epithelial Cells by Group B Streptococcus
    Use of a dynamic in vitro attachment and invasion system (DIVAS) to determine influence of growth rate on invasion of respiratory epithelial cells by group B Streptococcus Gennady Malin and Lawrence C. Paoletti* Channing Laboratory, Brigham and Women’s Hospital, Harvard Medical School, Boston, MA 02115 Edited by John J. Mekalanos, Harvard Medical School, Boston, MA, and approved September 20, 2001 (received for review February 16, 2001) Expression of capsular polysaccharide (CPS) and some surface Although harmless as a member of the normal human gut proteins by group B Streptococcus (GBS) is regulated by growth microflora, group B Streptococcus (GBS) can be life threatening rate. We hypothesized that precise control of GBS growth, and thus when vertically transmitted from a colonized mother to her surface-expressed components, could modulate the ability of GBS newborn during birth (8). Human isolates of GBS are sur- to invade eukaryotic cells. To test this hypothesis, a dynamic in rounded by capsular polysaccharide antigens (CPS), major vir- vitro attachment and invasion system (DIVAS) was developed that ulence factors that serve to protect GBS from host defense combines the advantages of bacterial growth in continuous culture mechanisms (9). Of the nine known GBS serotypes, type III is with tissue culture. Tissue culture flasks were modified with inlet the best studied because of its prevalence in cases of early-onset and outlet ports to permit perfusion of GBS. Encapsulated type III neonatal GBS disease. GBS strains M781 and COH1 and strains COH1-11 and COH1-13 Expression of several surface antigens of GBS, including type (transposon mutants of COH1 that express an asialo CPS or are III CPS and some important proteins, has been shown to be acapsular, respectively) were grown in continuous culture in a regulated by the rate of cell growth (10, 11).
    [Show full text]
  • CO2 INCUBATOR BUYING GUIDE Key Considerations When Purchasing a CO2 Incubator
    CO2 INCUBATORS CO2 INCUBATOR BUYING GUIDE Key Considerations When Purchasing a CO2 Incubator ® The Safer Choice for Your Laboratory NUAIRE.COM CO2 INCUBATORS A CRITICAL RESEARCH TOOL CO2 incubators provide an optimum environment for tissue cell culture growth in clinical and life science research laboratories. The parameters that contribute to optimum growth conditions are humidity, temperature control, sterility, CO2 gas control, and/or O2 control. Operated effectively, these incubators can maintain cells for extended periods of time, allowing for research and other necessary activities related to the cell and tissue culture contained within. Yet to assure that the cells are maintained in an environment in which they are protected requires purchasing the right incubator for your specific needs. To achieve that requires a strong awareness of the different aspects and features of today’s incubators. This buying guide covers the key considerations when making a purchase decision for a CO2 incubator. WATER JACKETED CO2 INCUBATORS Water has a greater specific heat capacity than air, so it is to maintain internal temperature four to five times longer frequently to used to regulate the interior temperature of lab than a direct heat incubator. incubators. The growth chamber is surrounded by a jacket of water [A] that is warmed by heating elements [B], which in Water-jacketed incubators, when filled, are very heavy and turn warms the growth chamber. must be emptied before being moved. Once moved and refilled, it can take as long as long as 24 hours to achieve Water circulates via convection, exchanging heat with the a stable operating temperature.
    [Show full text]