124 Mortise Turn Lever Cylinders Rosettes and Blocking Rings Cylinders and Components
124 Series Turn Lever
• Used in mortise locks in lieu of cylinders when keyed cylinders are not required No. 124-41 124-42 124-43 124-44 124-46 Length Including • Furnished standard with No . 97 cylinder 1-1⁄8" (29mm) 1-1⁄4" (32mm) 1-3⁄8" (35mm) 1-1⁄2" (38mm) 1-3⁄4" (44mm) rosette when ordered separately Cam (Dim. x) • Optional Collars/Spacers available and ordered separately, refer to product Cam No. Suffix Description catalogs for additional information None Sizes 41, 42, 43, 44 & 46 for standard offset SARGENT cam • Cylinder: Brass -101 Sizes 41, 42, 43, 44 & 46 x cam for Adams Rite 1850 lock • Turn lever: Brass or bronze -104 Sizes 41, 42, 43, 44 & 46 x cam for Adams Rite 4050, 4150, 4070, Cap: Brass, bronze, 4250 and 4350 locks stainless steel -105 Sizes 41, 42, 43, 44 & 46 x cam for inside of 16 and 92 mortise lock -106 Sizes 41, 42, 43, 44 & 46 x cam for Open Schlage L • Finishes: -112 Sizes 41, 42, 43, 44 & 46 x cam for Open Misc . 4, 10B, 10BE, 32D -113 Sizes 41, 42, 43, 44 & 46 x cam for 4370 Series Keyswitches
No. 1KB Rosette No. 97 Rosette No. 90 Blocking Ring
• Used with 8200 Series mortise locks and No . 90 blocking rings when • Standard for cylinders ordered • Used with rosettes as spacer when cylinders project from door separately from hardware mortise cylinder projects from face of • Free spinning to protect cylinder • Standard for 4800 dead bolts and 7900 door as shown above from vandalism and 7800 series mortise locks • Consult 8200 series catalog for Blocking • Consult 8200 series catalog for Rosette • Brass, bronze or stainless steel ring application details
application details • 1-11/16" diameter (43mm), 9/32" (7mm) • Brass, bronze or stainless steel • Furnished standard with 8200 LN projection, includes compression • 1-3/8" (35mm) diameter; available in and L rose design mortise trim spring thickness of 1/16", 1/8", 3/16", 1/4" • Cast brass, bronze or stainless steel • Finishes: 3, 4, 10, 10B, 10BE, 10BL, 20D, and 3/8" • 1-1/2" (38mm) diameter, includes 32, 32D • Specify thickness when ordering: Order compression spring as a #90 x 3/16" for the thickness needed • Projection from door: No. 1SB Cylinder Collar • Finishes: 3, 4, 10, 10B, 10BE, 10BL, 20D, 1KB-1 5/16" (8mm) 26, 26D, 32, 32D 1KB-2 7/16" (11mm) 1KB-3 9/16" (14mm) 1KB-4 11/16" (16mm) • Finishes: 3, 4, 10, 10B, 10BE, 10BL, 20D, 26, 26D, 32, 32D Rosette
Door Surface Cylinder Nut Wrench • Standard for 7800 BHD, 8200 BHL & BHW mortise locks • Stainless steel Cam • 1-29/32" diameter Cylinder • Finishes: 32, 32D • Available in 4 sizes. See 8200 Mortise Catalog for specifics on collar sizes and measurements
Note: Hardware ordered less cylinder will
Copyright © 2006, 2008-2017, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Copyright © 2006, 2008-2017, Sargent Manufacturing Company, an ASSA ABLOY Group Reproduction in whole or part without the express written permission of Sargent Manufacturing Company is prohibited. be provided with the standard collar and/or This wrench simplifies the installation and blocking rings for the standard 1-1/8" mortise removal of mortise cylinders nuts used on Blocking cylinders 700 Series Auxiliary Control (80 Series Ring Spring ET Trim) . When using cylinders that are longer consult Crosscut illustration of rosette application • Part number 97-0568 individual catalogs to order proper size collars and/or spacers .
1-800-727-5477 • www.sargentlock.com 90622:L 04/01/17 12 90143:N 04/01/17 Copyright © 2009, 2012-2017, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. • Standard SARGENT ConventionalCylinders 7900 MortiseLocks Cylinder RosettesandCams Cylinder CamsForMortiseLocks 97 RosetteCylinderCollar No. 90BlockingRing
Note: NOTE: See8200MortiseLockcatalog(page25)fordetailsoncylinderrequirements. function locks cam for16 and theInside except for50 all functions (13-0664) for Std Cam
14 For cylindersother thanconventionalandLFIC(removable core),seeCylindercatalogs foradditionalinformation 1-800-727-5477 Inside Cylinder for 16Function (13-0665) -105 Cam • • •
• • • • • • • 26, 26D,32,32D Finishes: 3,4,10,10B,10BE,10BL,20D, Specify sizewhenordering. in 1/16"(1.6mm)increments (1 .6mm)to3/8"(9mm)projection 1-3/8" (35mm)diameter;1/16" Brass, bronzeorstainlesssteel from faceofdoor when mortisecylinderprojects Used with1KBrosettesasspacer Standard for7900MortiseLocks Finishes: 3,4,10,10B,10BE,32,32D compression spring (7mm) 1-11/16" diameter(43mm),9/32" separately fromhardware Standard forcylindersordered Brass, bronzeorstainlesssteel cylinders andvariousdoorconditions 1KB Cylindercollarisusedforlonger projection, includes • cylinders 50 function supplied with Hotel Cam, 50 Function (13-2045) -115 Cam www.sargentlock.com • • • • SARGENT RemovableCoreCylinders function locks cam for16 and theInside except for50 for allfunctions Std 6300Cam 1KA RosetteCylinderCollar 1 KBRosetteCylinderCollar
For StandardCam:NoSuffixisrequired Specify requiredCamasasuffix:63-44-105cam 6300 Camsarenotsoldseparately removable 6300 Camsarefactoryinstalledandnot Inside Cylinder 16 Function for 6300Series -105 Cam • • • • • • • • • • 20D, 26,26D,32,32D Finishes: 3,4,10,10B,10BE,10BL, 1KA-4 11/16"(16mm) 1KA-3 9/16"(14mm) 1KA-2 7/16"(11mm) 1KA-1 5/16"(8mm)-Standard Projection fromdoor: includes compressionspring 1-1/2" (38mm)Square, Brass, bronzeorstainlesssteel E4 roses Furnished standardwiththeE2,E3and Used withmortisecylinders 1KB-3 :9/16"(14mm) 1KB-2 :7/16"(11mm) 1KB-1 :5/16"(8mm)-Standard Projection fromdoor: compression spring 1-1/2" (38mm)diameter,includes Brass, bronzeorstainlesssteel (ex .60-&70-) conditions andcylinders be usedasrequiredforvariousdoor The KBseriesofcylinderrosetteswill cylinders 50 function supplied with Hotel Cam, 50 Function for 6300Series -115 Cam
Overview, Features and ElectricalCylinders Specifications& Rosettes 8200/R8200/7800 Mortise Locks
51- Option Old Style Removable Core 21- Option Lost Ball Construction System • Available for existing systems only • The SARGENT construction keying system protects the building owner Permanent Removable Cores by providing temporary masterkeying during the construction period • Control key used to remove core, must request control key separately 1KB Rosette with 8200 & R8200 sectional trim • Used with mortise cylinders and No. 90 blocking rings when cylinders project from door 60- or 70- Option Plastic Construction Core • Furnished standard with L, O, LN, CO, CR, TO and TR roses • For doors that do not require key locking during the construction period • Brass, bronze or stainless steel • Operate with coin or flat screw driver • 1-1/2" (38mm) diameter, includes compression spring • For use with LFIC (removable) (60- Option) or SFIC (70- Option) core • Finishes: 3, 4, 10, 10B, 10BE, 10BL, 20D, 26, 26D, 32, 32D • Projection from door: 63- Option Large Format Interchangeable 1KB-1 5/16" (8mm) — Standard (Removable) Core 1KB-2 7/16" (11mm) • Allows immediate removal of the core. 1KB-3 9/16" (14mm) Virtually unlimited key changes • Available 10-63-, 11-60-, 11-63- & 11-64- IKA Rosette with 8200 sectional trim • For disposable core, see 60- Option • Used with mortise cylinders • 64- Option- LFIC 6-Pin construction core • Furnished standard with the E, E2, E3 and E4 roses • Control key used to remove core, must • Brass, bronze or stainless steel request control key separately • 1-1/2" (38mm) Square, includes compression spring • Projection from door: 7300B Interchangeable Core 1KA-1 5/16" (8mm) — Standard • Small Format Interchangeable Core 1KA-2 7/16" (11mm) 1KA-3 9/16" (14mm) • SARGENT Interchangeable Core cylinders and 1KA-4 11/16" (16mm) MasterKey Systems are available for increased security through quick change of keying. It is • Finishes: 3, 4, 10, 10B, 10BE, 10BL, 20D, 26, 26D, unnecessary to remove a cylinder 32, 32D • SARGENT 7300B Interchangeable Cores are available in SARGENT 4A and 4B keyways, as No. 97 Rosette well as the following standard competitor • Standard for cylinders ordered separately keyways: A, B, C, D, E, F, G, H, J, K, L, M from hardware • For disposable core, see 70- Option • Standard for 7800 knob mortise & 4870 • 65-73 Option — 6-Pin Small Format Interchangeable Cores- deadbolt uncombinated • Brass, bronze or stainless steel • 65-73-7P Option — 7-Pin Small Format Interchangeable Cores- • 1-11/16" diameter (43mm), 9/32" uncombinated (7mm) projection, includes compression • 70- Option — Small Format Interchangeable disposable core spring • 72- Option — Small Format Interchangeable construction core • Finishes: 3, 4, 10, 10B, 10BE, 10BL, 20D, • 11-72- Construction core provided for use with 11-7300 cylinder 32, 32D housing 11-70- temporary plastic core prepared to accept 11-7300 core No. 90 Blocking Ring • 73- Option — 6-Pin Small Format Interchangeable core, SARGENT • Used with 1KB rosettes as spacer when 4A, 4B keyways mortise cylinder projects from face of door • 73-7P Option — 7-Pin Small Format Interchangeable core, SARGENT • Brass, bronze or stainless steel 4A, 4B keyways • Finishes: 3, 4, 10, 10B, 10BE, 10BL, 20D, 26, • Control key used to remove core (provided separately) 26D, 32, 32D
1SB Cylinder Collar 1KB-5 Cylinder Retaining Cap • Standard for 7800 BHD, 8200 BHL & BHW • Required for double cylinder functions on KS mortise locks and LS Escutcheon only • Stainless steel • Steel or stainless steel Copyright © 2004-2017, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or part without the express written permission of Sargent Manufacturing Company is prohibited. • 1-29/32" diameter • 1-15/32" (37mm) diameter • Finishes: 32, 32D • 9/16" (14mm) projection • Finishes: 3, 4, 9, 10, 10B, 10BE, 10BL, 20D, 26, • Available in 4 sizes. See page 28 for specifics 26D, 32, 32D on collar sizes and measurements
1-800-727-5477 • www.sargentlock.com 29 90115:W 05/16/17 CylindersOverview, RequirementsFeatures and &Electrical Cams Specifications 8200/R8200/7800 Mortise Locks
Single Cylinder Double Cylinder Sectional Trim (CO, CR, L, LN, O, PT, SL, SN, TO, TR) Cylinder Door Thickness Cylinder Door Thickness Size 1-3/8" 1-3/4" 2" 2-1/4" Size 1-3/8" 1-3/4" 2" 2-1/4" 41 1KB-2 1KB-1 1KB-1 1KB-1 41 1KB-3 1KB-2 1KB-1 1KB-1 42 1KB-3 1KB-2 1KB-2 1KB-1 42 1KB-4 1KB-3 1KB-2 1KB-1 43 1KB-4 1KB-3 1KB-3 1KB-3 43 97-0352 1KB-4 1KB-3 1KB-2
Sectional Trim (E, E2, E3, E4) Cylinder Door Thickness Cylinder Door Thickness Size 1-3/8" 1-3/4" 2" 2-1/4" Size 1-3/8" 1-3/4" 2" 2-1/4" 41 1KA-2 1KA-1 1KA-1 1KA-1 41 1KA-3 1KA-2 1KA-1 1KA-1 42 1KA-3 1KA-2 1KA-2 1KA-1 42 1KA-4 1KA-3 1KA-2 1KA-1 43 1KA-4 1KA-3 1KA-3 1KA-3 43 1KA-4 1KA-3 1KA-2
Escutcheon Trim (CE, KE1, KE2, KW1, LE1, LE2, LW1, TE) Cylinder Door Thickness Cylinder Door Thickness Size 1-3/8" 1-3/4" 2" 2-1/4" Size 1-3/8" 1-3/4" 2" 2-1/4" Cylinder Cylinder Cylinder 41 1KB-1 Cylinder Only 41 1KB-2 90 1/8 Cylinder Only Only Only Only Cylinder Cylinder 42 1KB-2 1KB-1 Cylinder Only 42 1KB-3 1KB-2 1KB-1 Only Only
43 1KB-3 1KB-1 1KB-1 Cylinder Only 43 1KB-4 1KB-3 1KB-2 90 1/8
Escutcheon Trim (WT) Cylinder Door Thickness Cylinder Door Thickness Size 1-3/8" 1-3/4" 2" 2-1/4" Size 1-3/8" 1-3/4" 2" 2-1/4" Cylinder Cylinder Cylinder 41 97 Cylinder Only 41 1SB-2 97 Cylinder Only Only Only Only Cylinder 42 1SB-2 97 Cylinder Only 42 1SB-3 1SB-2 97 Cylinder Only Only Cylinder 43 1SB-3 97 97 43 1SB-4 1SB-2 1SB-2 97 Only
Specialty Hardware (BHW, BHL, BHD, ALP)
Cylinder Door Thickness Cylinder Door Thickness Size 1-3/8" 1-3/4" 2" 2-1/4" Size 1-3/8" 1-3/4" 2" 2-1/4" 41 1SB-2 1SB-1 1SB-1 1SB-1 41 1SB-3 1SB-2 1SB-1 1SB-1 42 1SB-3 1SB-2 1SB-2 1SB-1 42 1SB-4 1SB-3 1SB-2 1SB-1 43 1SB-4 1SB-3 1SB-3 1SB-3 43 1SB-4 1SB-4 1SB-3 1SB-2
Cylinder Cams For Mortise Locks SARGENT Conventional Cylinders SARGENT Large Format Interchangeable Core Cylinders • Standard • 6300 Cams are factory installed and are not removable • 6300 Cams are not sold separately • Specify required Cam as a suffix: 63-44-105 cam • For Standard Cam: no suffix is required
Std Cam -105 Cam -115 Cam (13-0664) (13-0665) (13-2045) for all 16 & 92 50 Function functions Function Hotel Cam, except for 50 Inside supplied with and the Inside Cylinder 50 function cam for 16 & Cam cylinders Std 6300 Cam -105 Cam -115 Cam 92 function for all functions for 6300 Series for 6300 Series Copyright © 2004-2017, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or part without the express written permission of Sargent Manufacturing Company is prohibited. locks except for 50 16 & 92 function 50 (Hotel) and the Inside I/S Cylinder function, cam for 16 & supplied with 92 function 50 function See Cylinder catalogs for additional information locks cylinders
1-800-727-5477 • www.sargentlock.com 90115:W 05/16/17 30 Multi-Functional Lockbody 8200/R8200/7800 Mortise Locks
How to Change Lock Function: The Green Catch Screw must be located in the designated location as specified on the lock case to produce the desired function. There are three locations: one location for 05, 37 & 38 functions; one location for 04, 06, 13, & 31 functions; and one location for 36 function. Note: To change to functions 04, 06, 13, & 31, the hub must be at the 45° position as specified on the case before screwing in the green catch screw.
Function & Part Listing for the Multifunction Lockbody
Function #41 Cylinder Cyl. Collars Lever/Knob Requirements Thumb turn ** Inside Trim Set & 04 Store Room / Closet (F07) 1 * 1 - 1KB Not used *** Outside Trim Set ** Inside Trim Set & 05 Office / Entry (F04) 1 * 1 - 1KB ++ 1 *** Outside Trim Set + Trim One Side Kit, Inside Lever/ 06 Store Room / Service 1 * 1 - 1KB Not used Knob & Rose/Escutcheon + Trim One Side Kit, Inside Lever/ 13 Communicating / Exit Not used Not used Not used Knob & Rose/Escutcheon + Trim One Side Kit, Inside Lever/ 31 Utility 1 * 1 - 1KB Not used Knob & Rose/Escutcheon + Trim One Side Kit, Inside Lever/ 36 Closet 1 * 1 - 1KB Not used Knob & Rose/Escutcheon ** Inside Trim Set & 37 Classroom (F05) 1 * 1 - 1KB Not used *** Outside Trim Set ** Inside Trim Set & 38 Classroom Security (F32) 2 * 2 - 1KB-2 Not used *** Outside Trim Set
*Cylinder Collars: Noted are based on 1-3/4" Thick Doors with standard #41 size cylinders. Other sized doors and cylinders will required different collar sizes and possibly blocking rings - see chart on page 30 of this catalog for details ** Inside trim sets include: Inside lever/knob, inside rose or escutcheon, trim pack (spindles, through-bolt screws, set screw, inside adapter plate assembly), trim finish screws (for escutcheons) *** Outside trim sets include: Outside lever/knob, outside rose or escutcheon, outside mounting plate, two through-bolt studs, washers, retaining nut, and cylinder rosettes (for cylinder functions only) + Trim One-Side Kit includes: adapter assembly, spindle, through-bolt screws and plate adapter assembly. An inside lever is always used with this kit and is used on either side of the door as required ++ Thumb turn: Rose trims use 130KB thumb turn for Levers, and 130W thumb turn for Knobs. Escutcheon trims require escutcheon to be ordered according to function/design, to receive thumb turn affixed to it
Type of Rose/Escutcheon Kit Part Number Trim One Side Kit E, O, KW, LN & LW1 (Standard trim only — not for use with Studio levers) 82-3208 Trim One Side Kit KE & LE (1 & 3) (Standard trim only — not for use with Studio levers) 82-3209
Trim One Side Kit L Rose & WT 82-3210 Copyright © 2004-2017, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or part without the express written permission of Sargent Manufacturing Company is prohibited. Trim One Side Kit Blank Rose 82-4023
Note: 8200/R8200/7800 mortise locks are certified for all functions including electrical functions and trims without exceptions.
1-800-727-5477 • www.sargentlock.com 37 90115:W 05/16/17