DOCSLIB.ORG

Trillium Tunic & Dress

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Trillium Tunic & Dress TrilliumCHILDREN’S Tunic PDF PATTERN Girl& SizingD 2t toress 12 years 2 3 How it Looks from the..... Standard Size Chart Front Side Back Imperial (In) Size 2t 3t 4t 5t 6 7 8 10 12 Chest 20.5 21 22 23 24 26 27 28.5 30 Waist 21 21.5 22 22.5 23 23.5 24.5 25 26 Hips 21 22 23 24 25 27.5 28.5 30 32 Height 35 38 41 44 46.5 50.5 52.5 55 58 Inseam 14 15.5 17 18.75 20.25 23 24.25 26 27.5 Metric (cm) Size 2t 3t 4t 5t 6 7 8 10 12 Chest 52 53.3 55.8 58.4 61 66 68.5 72.4 76.2 Waist 53.3 54.6 55.8 57.2 58.4 59.7 61.6 63.5 66 Hips 53.5 55.8 58.4 61 63.5 69.9 72.4 76.2 81.3 Height 88.9 96.5 104 111.7 118 128.3 133.35 139.7 147.3 Pattern Details Inseam 35.5 39.3 43.2 47.6 51.4 58.4 61.5 66 69.8 Simple Bodice or How to Measure Your Child Chest: Have your child raise their arms to shoulder height and measure across the Pieced Bodice nipple line. Waist: Tie a piece of yard around your childs waist. Then ask them to bend to Tunic Length or each side and touch their toes. This will move the yarn or ribbon into position at Maxi Dress Length the natural waist. Use your tape measure at this point to determine size. Hips: Measure at the fullest point of the hips, not across the hip bones. Also you want to make sure that you keep the measuring tape level all the way around. Sleeveless, Short Sleeve, or Height: Have your child stand against a wall, with their heels and head touching Simple Bodice Tunic Length the wall. Be sure that they are looking straight forward and not up at you. Mark this 3/4 Sleeve with rouching point on the wall (we like to use a bit of washi-tape). Have your child step away and measure the height of this point to the floor. Inseam: Have your child stand with their feet about shoulder-length apart. Measure from the inner hip joint to the floor. Arm: Have your child place their arm on their hip giving a natural bend to the elbow. Measure from the point of the shoulder, along the bend of the elbow, and through to the base of the wrist bone. Neck to Waist: Have your child look down slightly. Measure from the protrusion point of the large neck bone down to the yarn tied at the natural waist. Waist to Floor: Measure from the yarn tied at the natural waist down to the floor. Cervical Height: Add the ‘Neck to Waist’ & ‘Waist to Floor’ measurements to- Rouching Detail Pieced Bodice Maxi Length gether. Trillium Tunic & Dress Pattern © Phat Quarters Trillium Tunic & Dress Pattern © Phat Quarters 4 5 Recommended Fabrics Haberdashery/Notions Finished Measurements 2-3 Buttons Imperial (In) Voile Trim (optional) Cotton Lawn Size 2 3 4 5 6 7 8 10 12 Ligth-weight Cottons Bodice (W) Tunic Front (L) 16.25 17 18 19 20 20.75 21.5 22.5 23.5 Tunic Back (L) 19.25 20 20.75 21 22.25 23.5 24 25.5 27 Maxi (L) 28.75 31 34 36 38 40 43.25 46 49 Pattern Basics & Techniques Metric (cm) While you are pre-washing your fabrics, read the entire pattern to better understand the process. All seam allowances will be 1/2” unless otherwise stated, for construction or design need. For additional tips, tricks, and tech- Size 2 3 4 5 6 7 8 10 12 niques visit our blog Phat Quarters. Bodice (W) Tunic Front (L) 41.25 43.2 45.7 48.26 50.8 52.7 54.6 57 59.7 Selvage: The tightly woven edge of fabric finished by the manufacturer to prevent fraying. Tunic Back (L) 48.9 50.8 52.7 53.3 56.5 59 60.9 64.7 68.5 Grainline: The term given to the orientation of the fibers that create the fabric. The grainline is parallel to the sel- Maxi (L) 73 78.7 86.4 91.4 96.5 101.6 109.8 116.8 124.5 vage line of the fabric. This is the direction on the fabric that you will want to place the ‘grainline’ pattern markings when cutting out your pattern pieces. How to Transfer Pattern Markings: There are multiple ways to do this. Here are a few favorites. (1) Clip into the seam allowance but not beyond. (2) Cut an extra triangle beyond the actual pattern piece. (3) Use a fabric marker, tailors chalk, or tracing wheel with paper. (4) Place pins in location of markings. Back Stitch: Stitch forward 3-4 stitches, then without lifting the needle, stitch backwards over the stitches just made until reaching the first stitch. Then begin forward stitching as desired. Understitch: Press the seam allowance to the lining side. Sew on the right side of the lining fabric 1/8” from the seam line. This will prevent the lining from rolling to the right side of the fabric when it is worn. Top Stitch: Using a stitch length of 3-3.5, stitch 1/8” away from the folded edge on the right side of the fabric. Stay Stitch: Using a normal stitch length on your machine to sew along the edge of a curve. This will prevent distortion of the curve. It is best to stay stitch right after you cut your fabric piece and follow the direction noted in the pattern. Basting Stitch: Using the longest stitch available on your machine to sew two or more fabrics temporarily in place. Re- move the baste stitch once a permanete stitch has been completed. Gathering Stitch: Using the longest stitch available on your machine, create two rows of stitching with a 1/4” space be- tween. Take both bottom threads and pull to shorten the length of the the fabric. Attach the gathered fabric to desired fabric in the 1/4” gap and then remove the gathering stitches. Clip for CONCAVE CURVES: A curve where the edge of the fabric is shorter than the area it will be folded into. Cut, at 45 degree angles, into the seam allowance. This will allow curves in the fabric to stretch and lay flat or smooth along the curve. Notch for CONVEX CURVES: A curve where the edge of the fabric is longer than the area it will be folded into. Cut little triangles out of the seam allowance. This will reduce the bulk on the curve and allow it to lay flat or smooth. Use pink- ing shears to save time and create even notches. Trillium Tunic & Dress Pattern © Phat Quarters 6 7 Fabric Cutting Guide Pieced Front Bodice Skip to Step 3 for Simple Bodice Step 1: With right sides together match the bot- tom raw edge of Bodice piece A & to the top raw edge of Bodice piece B. Pin in place and sew. Trim the seam allowance with pinking shears. Step 2: Press the seam allowance towards the top of the Bodice. Topstitch 1/8” from the edge of Bodice piece B. Repeat for the opposite side. Fabric Requirments Yardage required when using 44” wide fabric. 44” Wide 2t 3t 4t 5t 6 7 8 10 12 Step 3: Lay the Back Bodice right side up. Lay Back Bodice 5/8 5/8 3/4 3/4 3/4 3/4 7/8 7/8 7/8 the Front Bodice pieces on the top, right sides together. Match the shoulders. Pin and stitch in Front Bodice 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 place. Tunic Skirt 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 Maxi Skirt 1 3/8 1 1/2 1 5/8 1 3/4 1 3/4 1 7/8 2 2 1/8 2 1/4 Sleeve (Long) 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Sleeve (Long) 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 Centemeters required when using 150cm wide fabric. Step 4: Lay the Back Bodice Lining right side up. 150cm wide 2t 3t 4t 5t 6 7 8 10 12 Lay the Front Bodice Lining on the top, right sides together. Match the shoulders.. Pin and stitch in Back Bodice 60 60 60 70 70 70 70 80 80 place. Front Bodice 30 30 30 30 30 30 30 30 40 Tunic Skirt 40 40 40 40 40 40 40 50 50 Maxi Skirt 120 130 150 160 160 170 180 190 210 Sleeve (Long) 30 30 30 40 40 40 40 50 50 Trillium Tunic & Dress Pattern © Phat Quarters Trillium Tunic & Dress Pattern © Phat Quarters 8 9 Step 5: Lay the Back & Front Bodice Lining piec- Step 9: Lay the Button Placket wrong side up. es right side up. Lay the Back & Front Bodice main Press the long raw edge of the Button Placket pieces on the top, right sides together. Match the 1/4” to the wrong side. Press the top short edge necklines.
Load more

Recommended publications
  • From the Library Of: Superior Sewing Machine & Supply
    Scissorscatalog_012715_finalfiles_Layout12/25/153:44PMPage1 From the library of: Superior Sewing Machine & Supply LLC Scissorscatalog_012715_finalfiles_Layout12/25/153:44PMPage2 Quality, Selection & Value – Guaranteed for Life Precision cutting, long-lasting sharpness and exceptional comfort. That’s what today’s sewers, quilters and crafters demand—and that’s what Mundial delivers. With an expanded line of scissors and shears, from the top-of-the- line Classic Forged to our new Eberlecrafts Titanium and CushionPro lines, Mundial offers the right product for every cutting task. We prove our commitment to quality and customer satisfaction by backing every one of our products with a Lifetime Guarantee against defects in materials, construction and workmanship.* *Misuse and abuse are specifically excluded from guarantee coverage. Table of Contents Commitment to Service & Category Growth Choosing the Mundial’s uncompromising commitment to quality extends beyond our Right Scissors................... 2 products to our relationships with our trade partners and our efforts to grow Care & Use...................... 2 the scissors and shears category through: • Prompt, responsive customer service and unmatched product availability Classic Forged.................. 3 • Broad product assortment spanning every price point Industrial Forged............... 5 • Promotional packs, gift sets and improved packaging for value-added mer- CushionPRO.................... 7 chandising and display opportunities Titan-Edge ..................... 8 Through a combination
    [Show full text]
  • CJSH Grades: 9-12
    Crawford Central School District Textiles I - CJSH Grades: 9-12 Course Description: Textiles I is an introductory sewing course for students who may or may not have experience with sewing. Skills introduced in Textiles I include: hand sewing, mending, basic embroidery skills, basic crochet, introduction to the sewing machine, and simple quilting techniques. Unit Title: Introduction to Textiles I Time: September Essential Questions: What do I want to accomplish in this course? Resources: computers, Pinterest Content Skills Vocabulary Assessment Standards Project and Skill Goals for Students will create a visual “To Finished Product PA Core Standards the academic year Do” list for the year using Rubric Scoring National Standards ‘Pinterest’ (or resource materials in the classroom) and a copy of the Level I Skill List Unit Title: Basic Skills Time: September Essential Questions: What are the basic skills necessary to sewing? Resources: Internet, classroom resources, hand-outs Content Skills Vocabulary Assessment Standards Basic Skills • needle threading • rotary cutters Finished Product PA Core Standards • knotting • shears Rubric Scoring National Standards • ironing • pinking shears • types of fabric • embroidery • types of thread hoops • separating 6-ply threads • Thimbles • Tools: rotary cutters, shears, • quilting thimbles pinking shears, embroidery • templates hoops, thimbles, quilting thimbles… • Tracing patterns Unit Title: Hand Sewing: Embroidery Sampler Time: September - October - November Essential Questions: How can I add to my
    [Show full text]
  • Activity Toolkit for Seniors Staying Engaged, Staying Safe During
    Activity Toolkit for Seniors Staying Engaged, Staying Safe During COVID-19 May 15, 2020 Version 3: May 15, 2020 Version 2: April 24, 2020 Version 1: April 17, 2020 Table of Contents Activity Toolkit for Seniors – What’s It All About? 1 Making Activities Accessible 2 Leisure Inventory 3 The Five Domains of Recreation Therapy and Activities 5 A. Activity Plans 7 Activity Plan Themes 7 Arts and Crafts . Painting Ceramics or Wooden Projects 9 . Wooden Tray Collage 10 . Fragrant Cards 11 Cooking . Ice Cream Sundae 12 . Make Your Own Pizza 13 . Baking 14 . Strawberry Freezer Jam 15 Brain Teasers . Product Slogans 16 . Cards (Concentration) 17 . Jigsaw Puzzles 18 . Analogies 19 . Match Up 20 Horticulture . Bird Feeder 21 . Forcing Bulbs 22 . Plant Cutting 23 Spiritual . Sacred Music 24 . TV Devotions / Services 25 . Reading Poems / Passages 26 Reminisce . Armchair Travelling 27 . Music Biography 28 . Reading a Book 29 . Sharing Collections 30 . Family Photo Album 31 . Moment in Time 32 Sensory Stimulation . Pet Grooming 33 . Sensory Stimulation 34 . Spa Day 35 . Music and Movement 36 . Pair and Toss Socks 37 Activity Toolkit for Seniors – May 15, 2020 ii | Page Table of Contents (cont’d) B. Virtual Resources - Online 1. Activities 38 Games . Colouring pages . Crossword puzzles . Hidden object picture puzzles . How to make a WordSearch game . Jigsaw puzzles . Printable games for seniors . Sudoku puzzles Exercise . Activities for seniors with limited mobility . “It’s Your Choice” Exercise Program - University Health Network • Warm-Up • Strength, Balance and Aerobic . Osteoporosis • Hip exercises • Knee exercises • Managing osteoporosis through exercise • Prevent falls or fractures • Video exercise series .
    [Show full text]
  • NAICS Subsector 332 Fabricated Metal Product Manufacturing
    NAICS Subsector 332mFabricated Metal Product Manufacturing Product code Industry and product description Unit of measure Data collected CIR survey1 Products primary2 332111 IRON AND STEEL FORGINGS 3321111 HOT IMPRESSION DIE IMPACT, PRESS, AND UPSET STEEL FORGINGS 33211111 Hot impression die impact, press, and upset carbon steel forgings 3321111101 Hot impression die impact, press, and upset carbon steel forgings.......... short tons S 33211112 Hot impression die impact, press, and upset alloy steel forgings, excluding stainless and hi~temp 3321111206 Hot impression die impact, press, and upset alloy steel forgings, excluding stainless and hi~temp ................................................ short tons S 33211113 Hot impression die impact, press, and upset stainless steel forgings 3321111311 Hot impression die impact, press, and upset stainless steel forgings........ short tons S 33211114 Hot impression die impact, press, and upset hi~temp (iron, nickel, or cobalt~ base alloy) steel forgings 3321111416 Hot impression die impact, press, and upset hi~temp (iron, nickel, or cobalt~ base alloy) steel forgings............................................. short tons S 3321113 COLD IMPRESSION DIE IMPACT, PRESS, AND UPSET STEEL FORGINGS 33211131 Cold impression die impact, press, and upset steel forgings 3321113101 Cold impression die impact, press, and upset carbon steel forgings......... short tons S 3321113106 Cold impression die impact, press, and upset alloy steel forgings........... short tons S 3321113111 Cold impression die impact, press, and upset stainless steel and hi~temp (iron, nickel, or cobalt~base alloy) forgings.............................. short tons S 3321115 SEAMLESS ROLLED RING FORGINGS, FERROUS, NOT MADE IN STEEL MILLS 33211151 Seamless rolled ring forgings, ferrous, not made in steel mills 3321115101 Seamless carbon steel and alloy steel rolled ring forgings, excluding stainless and hi~temp, not made in steel mills ..........................
    [Show full text]
  • MAY 26, 2021 TWENTY-FIVE CENTS Inside: Public-Private Partnership Plan Progresses at 90 Washington St
    VOL. 9 NO. 21 SOMERVILLE, MASS. WEDNESDAY, MAY 26, 2021 TWENTY-FIVE CENTS Inside: Public-private partnership plan progresses at 90 Washington St. By Joe Creason The Somerville Redevelopment Authority meeting began without any comment from the public on Wednesday, May 19. Greg Karczews- ki, President at US2, was a guest presenter at the meeting. US2 is the Master Developer for the Union Square project which is currently un- der construction. US2 is responsible for the development of a Luxury cruising couple sites, including D2 and D3.1, which will in the 80s complement the new MBTA station being built page 3 in the Union Square area. “With regards to the D2 site, if you’ve been around there anytime recently you will have no- ticed increasing levels of activity. Current tasks on site include foundation work, utilities and we will begin work on the T station elevator soon,” The new MBTA station under construction in the Union Square area has been progressing steadily, although Karczewski said. the timeline for completion of the station's elevator has been pushed back. — Photo courtesy of MassDOT According to Karczewski, Continued on page 4 Bringing art to the Blessing of the Bay Boathouse Blessing of the Bay is a slice of nature right here PILOT ordinance in urban Somerville. The boathouse is home in the works to a canoe and kayak rental plus a rowing club. page 5 Now they are adding some great art. This sign and art installation celebrates Bless- ing of the Bay Park’s ecological and recreation- al importance to Somerville and the Mystic.
    [Show full text]
  • Biomaterials Science: a Multidisciplinary Endeavor Buddy D
    I NTRODUCTION Biomaterials Science: A Multidisciplinary Endeavor Buddy D. Ratner, Allan S. Hoffman, Frederick J. Schoen, Jack Lemons or implants. Although this is a text on materials, it will quickly BIOMATERIALS AND BIOMATERIALS SCIENCE become apparent that the subject cannot be explored without also considering biomedical devices and the biological response Biomaterials Science: An Introduction to Materials in to them. Indeed, both the effect of the materials/device on the Medicine addresses the properties and applications of materials recipient and that of the host tissues on the device can lead to (synthetic and natural) that are used in contact with biologi- device failure. Furthermore, a biomaterial must always be con- cal systems. These materials are commonly called biomaterials. sidered in the context of its final fabricated, sterilized form. For Biomaterials, an exciting field with steady, strong growth example, when a polyurethane elastomer is cast from a solvent over its approximately half century of existence, encompasses onto a mold to form the pump bladder of a heart assist device, it aspects of medicine, biology, chemistry, and materials science. can elicit different blood reactions than when injection molding It sits on a foundation of engineering principles. There is also a is used to form the same device. A hemodialysis system serv- compelling human side to the therapeutic and diagnostic appli- ing as an artificial kidney requires materials that must function cation of biomaterials. This textbook aims to (1) introduce in contact with a patient’s blood and also exhibit appropriate these diverse elements, particularly focusing on their interrela- membrane permeability and mass transport characteristics.
    [Show full text]
  • Tailoring AD 410*
    PORTLAND FASHION INSTITUTE AD410 -- TAILORING Instructor: e-mail: Term: Voice mail: Total class hours: 36 Office hours: n/a Class meets: Course description: Using a standard pattern that is provided, students will learn contemporary tailoring techniques for constructing a tailored six panel suit jacket or sportcoat. Course objectives: Upon completion of the class, students will know how to: – Identify the traditional components of a tailored jacket – Assess and correct fit problems through the use of a muslin prototype – Use industry-standard seam allowances – Understand how fusible and sew-in interfacings are used to provide a jacket’s structure – Demonstrate knowledge of basic hand stitches – Construct a half canvas, notch lapel, set-in sleeves, and a bagged lining using professional techniques – Apply appropriate apparel terminology in business situations – Select fabrics, linings, interfacings, and notions that are appropriate for the manufacture of a standard suit jacket or sportcoat – Manufacture a six panel jacket using contemporary tailoring techniques from first cut to final closure so that the garment is ready for sale. Competencies being assessed: At the end of the course, a student will know how to: − Manufacture any given garment using correct construction techniques from first cut to final closure so the garment is ready for sale − Spot issues and know multiple ways to correct them according to fabric and cost. − Write design briefs that show understanding of how business concepts such as brand and cost apply to apparel design. Prerequisites: Apparel Construction (AD103). Patternmaking 1 and 2, Fit and Pattern Alteration recommended. Class format: Class time is divided between lecture/demo and supervised workshop time Suggested text: Tailoring: The Classic Guide to Sewing the Perfect Jacket, Creative Publishing International 2011.
    [Show full text]
  • 4-H CDM Skill-A-Thon Sewing & Clothing ID
    4-H CDM Skill-a-Thon Sewing & Clothing ID The photos shown here are only one option of what an item may look like. Other options are available. Revised November 2020 Batik - Indonesian technique of wax resist dyeing applied to whole cloth. This technique originated from Java, Indonesia. It is made either by drawing dots and lines of the resist with a spouted tool called a tjanting, or by printing the resist with a copper stamp called a cap. Broadcloth - A very lightweight, smooth, flat looking fabric, with no pattern in the weave of the threads. It is similar in quality to pinpoint fabric but has less texture. This usually means it is slightly more transparent and not as shiny as the pinpoint. Chambray - A plain weave fabric woven with a colored yarn in the warp and a white yarn in the weft. Corduroy - A fabric with a distinct pattern, a “cord” or wale. It is mostly composed of tufted cords, sometimes exhibiting a channel (bare to the base fabric) between the tufts. Cotton - A fabric made from the fiber of its namesake plant. It is good for first time sewers to use because it’s easy to work with and used for everyday clothing. Eyelet - A type of fabric that has holes that are edged using a buttonhole stitch. The holes are precisely sized and situated to create a pattern or patterns, often floral designs or abstract geometric arrangements. Faux Fur - A fabric fashioned to simulate genuine animal hair. It is known as a pile fabric and is typically made from polymeric fibers that are processed, dyed, and cut to match a specific texture and color.
    [Show full text]
  • Pattern Layout, Pinning and Cutting
    Lesson Pattern Layout, Pinning 8 and Cutting Objectives This lesson will help you to • identify the various ways fabric may be folded in preparation for layout, pinning, and cutting. • correctly lay out a pattern. • give reasons for various layout, pinning, and cutting procedures. • interpret layout, pinning, and cutting information found on the pattern instruction sheet. Words to Know lengthwise fold double fold even plaid partial fold repeat uneven plaid crosswise fold Gathering Information Following the correct pattern layout will help ensure that your garment is cut out on- grain. Pinning and cutting your garment carefully will avoid wasting fabric. This lesson will provide the information you need to lay out, pin, and cut out your pattern pieces. You will first need to make sure the cut ends of your fabric are on-grain. If they are off- grain, follow the directions in Lesson 4, “Fabric Preparation,” to straighten the grain before preparing the fabric for pattern layout. Folding Fabric can be folded in a variety of ways the Fabric before pattern pieces are positioned for cutting. The type of fold used depends on • the number of pattern pieces that must be placed on a folded edge • the fold that results in the most economic use of the fabric • the width of the fabric • the pattern size Pattern companies have already taken these factors into consideration for you. Therefore, you should fold your fabric as shown in the diagram found on your pattern instruction sheet. (Continued) 101 L5-8.indd 101 8/8/2012 8:59:57 AM 102 Successful Sewing Lengthwise fold.
    [Show full text]
  • What Are Fabric Scissors?
    What are fabric scissors? Fabric scissors or fabric shears as they are more commonly referred to are the main tool used for cutting out your fabric. There are various different types of fabric shears on the market which range from general purpose to a traditional tailors shears. Shears should cut cleanly and smoothly so the type you choose usually depends on what material you need to cut and what you find comfortable to use. If you are buying hand crafted shears, your choice will also be influenced by the shear manufacturers skill and the quality of steel used. Heavy fabrics such as leather and denim are easier to cut using shears that have longer handles or sharper blades. Synthetic fabrics tend to slip on smooth blades so a serrated pair for better control would be the answer. Elastic or pivoted shears offer precision cutting right to the tip of the blades. Most dressmakers shears are angled (or bent) to keep the blades flat on the table reducing disruption to your lay. But very angled shears can be awkward to use if you need to stretch across a table. Lightweight shears are recommended for occasional use where as drop forged shears are for more prolonged use. The size you choose should depend largely on what you find comfortable to use. If possible try to borrow a pair to handle them and see if they suit you before buying. They mustn’t be to heavy for comfort. If you are in doubt, then go for the larger size. The maintenance of scissors and shears is very important, yet often neglected.
    [Show full text]
  • Friday's Kuspuk
    Friday’s Kuspuk Photo Guided Sewing Instructions Friday’s Kuspuk Welcome to the world of colorful Kuspuks! The Friday’s Kuspuk pattern is sized from 2 – 32. It was my hope to offer a multi-sized pattern that could fit just about any body! Take Your Measurements • Bust – fullest part • Hip – fullest part • Shoulder to Hem for Shirt Version • Shoulder to Hip for Dress Version • Back of Neck, Over the Shoulder, to the Wrist for Arm Length Use Your Measurements to Determine Your Custom Size • Most people requiring larger sizes will need to combine sizes to obtain a nice fit. Examples of this include: – Narrow shoulders might need a size 20, bust might need a 24 and hip might require a 32. Also note the wrist cuff might work in a size 16. – In this scenario, the hood, neck shoulder and the top half of the armhole would be cut on the 20. The lower half of the armhole would be gradually cut towards the 24. The side seam would start at a 24 under the arm and gradually move towards the 32 and straighten at the lengthen or shorten here line. This is illustrated on the next slide. Choose Kuspuk Style Shorter Version Longer Version Determine if Changes will be Made to Length of Kuspuk: Examples of this include: • Lengthen or shorten to fit personal size/choice. • Lengthen the shorter version to a tunic length to wear with leggings. • Shorten the ruffle to suit personal taste. Cutting Your Pattern • Using the measurement information you gathered, determine which sizes you will be using to cut your pattern.
    [Show full text]
  • Kids Blouse: Mousie Blousie with Heather Ross
    Kids Blouse: Mousie Blousie with Heather Ross Chapter 1 - Introduction Overview - This Mousie Blousie is a great way to use busier prints because it has such basic, simple lines, but it has a lot of great detail, too. It's a great first project if you've never done buttonholes or buttons before because it has a really simple fold over placket, really easy, really fun. We've finished it off with this great little detail in front with a little bit of hand stitching. It just gives it that perfect handmade finish. Chapter 2 - Materials Materials - So I've cut my pieces out for my mousie blousie based on the direction on my pattern, and this is what I've got. Two blouse back pieces, two blouse back facing pieces, one blouse front piece, one blouse facing piece. I have my small, little piece that is going to become my decorative tab. I have my piece of bias trim for the decorative tab. And for materials, I have six little green buttons. These are half-inch buttons, you could use 3/4-inch if you wanted to make a little more of a statement with your tab. I have a very standard sewing machine, but it needs to have a buttonhole foot, because I'm going to put buttons on the back of my blouse as well as on the decorative tab, and those are going to open and close. I have a pair of pinking shears, I have a pair of standard sewing shears. I have my trimmer.
    [Show full text]